summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts')
-rw-r--r--arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts329
1 files changed, 329 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
new file mode 100644
index 000000000..c105932f6
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZG1E SODIMM carrier board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7745-iwg22m.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E";
+ compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745";
+
+ aliases {
+ ethernet0 = &avb;
+ serial3 = &scif4;
+ serial5 = &hscif1;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ stdout-path = "serial3:115200n8";
+ };
+
+ audio_clock: audio_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ backlight_lcd: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+
+ lcd_panel: lcd {
+ compatible = "edt,etm043080dh6gp";
+ power-supply = <&vccq_panel>;
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+ };
+
+ vccq_panel: regulator-vccq-panel {
+ compatible = "regulator-fixed";
+ regulator-name = "Panel VccQ";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+
+ rsnd_sgtl5000: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy3>;
+ phy-mode = "gmii";
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy3: ethernet-phy@3 {
+ /*
+ * On some older versions of the platform (before R4.0) the phy address
+ * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
+ */
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&du {
+ pinctrl-0 = <&du0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&lcd_in>;
+ };
+ };
+ };
+};
+
+&hscif1 {
+ pinctrl-0 = <&hscif1_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c5 {
+ pinctrl-0 = <&i2c5_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ clocks = <&audio_clock>;
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ };
+
+ stmpe811@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* ADC conversion time: 80 clocks */
+ st,sample-time = <4>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+ };
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&pfc {
+ avb_pins: avb {
+ groups = "avb_mdio", "avb_gmii";
+ function = "avb";
+ };
+
+ backlight_pins: backlight {
+ groups = "tpu_to3_c";
+ function = "tpu";
+ };
+
+ can0_pins: can0 {
+ groups = "can0_data";
+ function = "can0";
+ };
+
+ du0_pins: du0 {
+ groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out";
+ function = "du0";
+ };
+
+ hscif1_pins: hscif1 {
+ groups = "hscif1_data", "hscif1_ctrl";
+ function = "hscif1";
+ };
+
+ i2c5_pins: i2c5 {
+ groups = "i2c5_b";
+ function = "i2c5";
+ };
+
+ scif4_pins: scif4 {
+ groups = "scif4_data_b";
+ function = "scif4";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
+ function = "ssi";
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+
+ #sound-dai-cells = <0>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi3>, <&src3>, <&dvc0>;
+ capture = <&ssi4>, <&src4>, <&dvc1>;
+ };
+ };
+};
+
+&scif4 {
+ pinctrl-0 = <&scif4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&ssi4 {
+ shared-pin;
+};
+
+&tpu {
+ pinctrl-0 = <&backlight_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};