summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi')
-rw-r--r--arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi233
1 files changed, 233 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
new file mode 100644
index 000000000..dd23de851
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxad-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ ethernet0 = &ethernet0;
+ mdio-gpio0 = &mdio0;
+ serial0 = &uart4;
+ };
+
+ led-controller-0 {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+
+ /* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce
+ * stmmac MDC clock without reducing system bus rate, we need to use
+ * gpio based MDIO bus.
+ */
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
+ &gpioa 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&dts {
+ status = "okay";
+};
+
+&ethernet0 {
+ pinctrl-0 = <&ethernet0_rmii_pins_a>;
+ pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&ethernet0_rmii_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+ };
+};
+
+&ethernet0_rmii_sleep_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
+ };
+};
+
+&iwdg2 {
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi_clk_pins_a
+ &qspi_bk1_pins_a
+ &qspi_cs1_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a
+ &qspi_bk1_sleep_pins_a
+ &qspi_cs1_sleep_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <104000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&qspi_bk1_pins_a {
+ pins1 {
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&reg_3v3>;
+ vqmmc-supply = <&reg_3v3>;
+ status = "okay";
+};
+
+&sdmmc1_b4_od_pins_a {
+ pins1 {
+ bias-pull-up;
+ };
+ pins2 {
+ bias-pull-up;
+ };
+};
+
+&sdmmc1_b4_pins_a {
+ pins1 {
+ bias-pull-up;
+ };
+ pins2 {
+ bias-pull-up;
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&uart4_idle_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-pull-up;
+ };
+};
+
+&uart4_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-pull-up;
+ };
+};
+
+&uart4_sleep_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+ };
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&reg_3v3>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&reg_3v3>;
+};