1 files changed, 83 insertions, 0 deletions
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
new file mode 100644
index 000000000..e1cb04ed5
--- /dev/null
+++ b/arch/arm/include/asm/floppy.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  arch/arm/include/asm/floppy.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
+ */
+#ifndef __ASM_ARM_FLOPPY_H
+#define __ASM_ARM_FLOPPY_H
+
+#define fd_outb(val, base, reg)						\
+	do {								\
+		int new_val = (val);					\
+		if ((reg) == FD_DOR) {					\
+			if (new_val & 0xf0)				\
+				new_val = (new_val & 0x0c) |		\
+					  floppy_selects[new_val & 3];	\
+			else						\
+				new_val &= 0x0c;			\
+		}							\
+		outb(new_val, (base) + (reg));				\
+	} while(0)
+
+#define fd_inb(base, reg)	inb((base) + (reg))
+#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
+					    0,"floppy",NULL)
+#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
+#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
+#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
+
+static inline int fd_dma_setup(void *data, unsigned int length,
+			       unsigned int mode, unsigned long addr)
+{
+	set_dma_mode(DMA_FLOPPY, mode);
+	__set_dma_addr(DMA_FLOPPY, data);
+	set_dma_count(DMA_FLOPPY, length);
+	virtual_dma_port = addr;
+	enable_dma(DMA_FLOPPY);
+	return 0;
+}
+#define fd_dma_setup		fd_dma_setup
+
+#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
+#define fd_free_dma()		free_dma(DMA_FLOPPY)
+#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
+
+/* need to clean up dma.h */
+#define DMA_FLOPPYDISK		DMA_FLOPPY
+
+/* Floppy_selects is the list of DOR's to select drive fd
+ *
+ * On initialisation, the floppy list is scanned, and the drives allocated
+ * in the order that they are found.  This is done by seeking the drive
+ * to a non-zero track, and then restoring it to track 0.  If an error occurs,
+ * then there is no floppy drive present.       [to be put back in again]
+ */
+static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 };
+
+#define FDC1 (0x3f0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 4
+
+#define N_FDC 1
+#define N_DRIVE 4
+
+#define CROSS_64KB(a,s) (0)
+
+/*
+ * This allows people to reverse the order of
+ * fd0 and fd1, in case their hardware is
+ * strangely connected (as some RiscPCs
+ * and A5000s seem to be).
+ */
+static void driveswap(int *ints, int dummy, int dummy2)
+{
+	swap(floppy_selects[0], floppy_selects[1]);
+}
+
+#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
+	
+#endif