summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-iop32x/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-iop32x/pci.c')
-rw-r--r--arch/arm/mach-iop32x/pci.c404
1 files changed, 404 insertions, 0 deletions
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c
new file mode 100644
index 000000000..7a215d2ee
--- /dev/null
+++ b/arch/arm/mach-iop32x/pci.c
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/plat-iop/pci.c
+ *
+ * PCI support for the Intel IOP32X and IOP33X processors
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/signal.h>
+#include <asm/mach/pci.h>
+#include "hardware.h"
+#include "iop3xx.h"
+
+// #define DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...) do { } while (0)
+#endif
+
+/*
+ * This routine builds either a type0 or type1 configuration command. If the
+ * bus is on the 803xx then a type0 made, else a type1 is created.
+ */
+static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+ u32 addr;
+
+ if (sys->busnr == bus->number)
+ addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
+ else
+ addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
+
+ addr |= PCI_FUNC(devfn) << 8 | (where & ~3);
+
+ return addr;
+}
+
+/*
+ * This routine checks the status of the last configuration cycle. If an error
+ * was detected it returns a 1, else it returns a 0. The errors being checked
+ * are parity, master abort, target abort (master and target). These types of
+ * errors occur during a config cycle where there is no device, like during
+ * the discovery stage.
+ */
+static int iop3xx_pci_status(void)
+{
+ unsigned int status;
+ int ret = 0;
+
+ /*
+ * Check the status registers.
+ */
+ status = *IOP3XX_ATUSR;
+ if (status & 0xf900) {
+ DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
+ *IOP3XX_ATUSR = status & 0xf900;
+ ret = 1;
+ }
+
+ status = *IOP3XX_ATUISR;
+ if (status & 0x679f) {
+ DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
+ *IOP3XX_ATUISR = status & 0x679f;
+ ret = 1;
+ }
+
+ return ret;
+}
+
+/*
+ * Simply write the address register and read the configuration
+ * data. Note that the 4 nops ensure that we are able to handle
+ * a delayed abort (in theory.)
+ */
+static u32 iop3xx_read(unsigned long addr)
+{
+ u32 val;
+
+ __asm__ __volatile__(
+ "str %1, [%2]\n\t"
+ "ldr %0, [%3]\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ : "=r" (val)
+ : "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
+
+ return val;
+}
+
+/*
+ * The read routines must check the error status of the last configuration
+ * cycle. If there was an error, the routine returns all hex f's.
+ */
+static int
+iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
+ u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
+
+ if (iop3xx_pci_status())
+ val = 0xffffffff;
+
+ *value = val;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 value)
+{
+ unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
+ u32 val;
+
+ if (size != 4) {
+ val = iop3xx_read(addr);
+ if (iop3xx_pci_status())
+ return PCIBIOS_SUCCESSFUL;
+
+ where = (where & 3) * 8;
+
+ if (size == 1)
+ val &= ~(0xff << where);
+ else
+ val &= ~(0xffff << where);
+
+ *IOP3XX_OCCDR = val | value << where;
+ } else {
+ asm volatile(
+ "str %1, [%2]\n\t"
+ "str %0, [%3]\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ :
+ : "r" (value), "r" (addr),
+ "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops iop3xx_ops = {
+ .read = iop3xx_read_config,
+ .write = iop3xx_write_config,
+};
+
+/*
+ * When a PCI device does not exist during config cycles, the 80200 gets a
+ * bus error instead of returning 0xffffffff. This handler simply returns.
+ */
+static int
+iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
+ addr, fsr, regs->ARM_pc, regs->ARM_lr);
+
+ /*
+ * If it was an imprecise abort, then we need to correct the
+ * return address to be _after_ the instruction.
+ */
+ if (fsr & (1 << 10))
+ regs->ARM_pc += 4;
+
+ return 0;
+}
+
+int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ struct resource *res;
+ struct resource realio;
+
+ if (nr != 0)
+ return 0;
+
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ if (!res)
+ panic("PCI: unable to alloc resources");
+
+ res->start = IOP3XX_PCI_LOWER_MEM_PA;
+ res->end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
+ res->name = "IOP3XX PCI Memory Space";
+ res->flags = IORESOURCE_MEM;
+ request_resource(&iomem_resource, res);
+
+ /*
+ * Use whatever translation is already setup.
+ */
+ sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
+
+ pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
+
+ realio.start = 0;
+ realio.end = realio.start + SZ_64K - 1;
+ pci_remap_iospace(&realio, IOP3XX_PCI_LOWER_IO_PA);
+
+ return 1;
+}
+
+void __init iop3xx_atu_setup(void)
+{
+ /* BAR 0 ( Disabled ) */
+ *IOP3XX_IAUBAR0 = 0x0;
+ *IOP3XX_IABAR0 = 0x0;
+ *IOP3XX_IATVR0 = 0x0;
+ *IOP3XX_IALR0 = 0x0;
+
+ /* BAR 1 ( Disabled ) */
+ *IOP3XX_IAUBAR1 = 0x0;
+ *IOP3XX_IABAR1 = 0x0;
+ *IOP3XX_IALR1 = 0x0;
+
+ /* BAR 2 (1:1 mapping with Physical RAM) */
+ /* Set limit and enable */
+ *IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1;
+ *IOP3XX_IAUBAR2 = 0x0;
+
+ /* Align the inbound bar with the base of memory */
+ *IOP3XX_IABAR2 = PHYS_OFFSET |
+ PCI_BASE_ADDRESS_MEM_TYPE_64 |
+ PCI_BASE_ADDRESS_MEM_PREFETCH;
+
+ *IOP3XX_IATVR2 = PHYS_OFFSET;
+
+ /* Outbound window 0 */
+ *IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
+ *IOP3XX_OUMWTVR0 = 0;
+
+ /* Outbound window 1 */
+ *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
+ IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
+ *IOP3XX_OUMWTVR1 = 0;
+
+ /* BAR 3 ( Disabled ) */
+ *IOP3XX_IAUBAR3 = 0x0;
+ *IOP3XX_IABAR3 = 0x0;
+ *IOP3XX_IATVR3 = 0x0;
+ *IOP3XX_IALR3 = 0x0;
+
+ /* Setup the I/O Bar
+ */
+ *IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
+
+ /* Enable inbound and outbound cycles
+ */
+ *IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+ *IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN;
+}
+
+void __init iop3xx_atu_disable(void)
+{
+ *IOP3XX_ATUCMD = 0;
+ *IOP3XX_ATUCR = 0;
+
+ /* wait for cycles to quiesce */
+ while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY |
+ IOP3XX_PCSR_IN_Q_BUSY))
+ cpu_relax();
+
+ /* BAR 0 ( Disabled ) */
+ *IOP3XX_IAUBAR0 = 0x0;
+ *IOP3XX_IABAR0 = 0x0;
+ *IOP3XX_IATVR0 = 0x0;
+ *IOP3XX_IALR0 = 0x0;
+
+ /* BAR 1 ( Disabled ) */
+ *IOP3XX_IAUBAR1 = 0x0;
+ *IOP3XX_IABAR1 = 0x0;
+ *IOP3XX_IALR1 = 0x0;
+
+ /* BAR 2 ( Disabled ) */
+ *IOP3XX_IAUBAR2 = 0x0;
+ *IOP3XX_IABAR2 = 0x0;
+ *IOP3XX_IATVR2 = 0x0;
+ *IOP3XX_IALR2 = 0x0;
+
+ /* BAR 3 ( Disabled ) */
+ *IOP3XX_IAUBAR3 = 0x0;
+ *IOP3XX_IABAR3 = 0x0;
+ *IOP3XX_IATVR3 = 0x0;
+ *IOP3XX_IALR3 = 0x0;
+
+ /* Clear the outbound windows */
+ *IOP3XX_OIOWTVR = 0;
+
+ /* Outbound window 0 */
+ *IOP3XX_OMWTVR0 = 0;
+ *IOP3XX_OUMWTVR0 = 0;
+
+ /* Outbound window 1 */
+ *IOP3XX_OMWTVR1 = 0;
+ *IOP3XX_OUMWTVR1 = 0;
+}
+
+/* Flag to determine whether the ATU is initialized and the PCI bus scanned */
+int init_atu;
+
+int iop3xx_get_init_atu(void) {
+ /* check if default has been overridden */
+ if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
+ return init_atu;
+ else
+ return IOP3XX_INIT_ATU_DISABLE;
+}
+
+static void __init iop3xx_atu_debug(void)
+{
+ DBG("PCI: Intel IOP3xx PCI init.\n");
+ DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
+ *IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
+ DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
+ *IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
+ DBG("PCI: Outbound IO window: PCI 0x%08x\n",
+ *IOP3XX_OIOWTVR);
+
+ DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+ *IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
+ DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
+ *IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
+ DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+ *IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
+ DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+ *IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
+
+ DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+ 0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
+
+ DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
+ DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
+
+ hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
+}
+
+/* for platforms that might be host-bus-adapters */
+void __init iop3xx_pci_preinit_cond(void)
+{
+ if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
+ iop3xx_atu_disable();
+ iop3xx_atu_setup();
+ iop3xx_atu_debug();
+ }
+}
+
+void __init iop3xx_pci_preinit(void)
+{
+ pcibios_min_mem = 0;
+
+ iop3xx_atu_disable();
+ iop3xx_atu_setup();
+ iop3xx_atu_debug();
+}
+
+/* allow init_atu to be user overridden */
+static int __init iop3xx_init_atu_setup(char *str)
+{
+ init_atu = IOP3XX_INIT_ATU_DEFAULT;
+ if (str) {
+ while (*str != '\0') {
+ switch (*str) {
+ case 'y':
+ case 'Y':
+ init_atu = IOP3XX_INIT_ATU_ENABLE;
+ break;
+ case 'n':
+ case 'N':
+ init_atu = IOP3XX_INIT_ATU_DISABLE;
+ break;
+ case ',':
+ case '=':
+ break;
+ default:
+ printk(KERN_DEBUG "\"%s\" malformed at "
+ "character: \'%c\'",
+ __func__,
+ *str);
+ *(str + 1) = '\0';
+ }
+ str++;
+ }
+ }
+
+ return 1;
+}
+
+__setup("iop3xx_init_atu", iop3xx_init_atu_setup);
+