summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1/mux.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap1/mux.h')
-rw-r--r--arch/arm/mach-omap1/mux.h144
1 files changed, 144 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/mux.h b/arch/arm/mach-omap1/mux.h
new file mode 100644
index 000000000..3e7ed3348
--- /dev/null
+++ b/arch/arm/mach-omap1/mux.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ * For example, W8_1610_MMC2_DAT0, where:
+ * - W8 = ball
+ * - 1610 = 1510 or 1610, none if common for both 1510 and 1610
+ * - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#include <linux/soc/ti/omap1-mux.h>
+
+#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+ .mux_reg = FUNC_MUX_CTRL_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
+ .pull_reg = PULL_DWN_CTRL_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
+ .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \
+ .pull_reg = OMAP7XX_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
+ pull_reg, pull_bit, pull_status, \
+ pu_pd_reg, pu_pd_status, debug_status) \
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG(mux_reg, mode_offset, mode) \
+ PULL_REG(pull_reg, pull_bit, pull_status) \
+ PU_PD_REG(pu_pd_reg, pu_pd_status) \
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
+ * not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is in the same register
+ * as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \
+ pull_bit, pull_status, debug_status)\
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG_7XX(mux_reg, mode_offset, mode) \
+ PULL_REG_7XX(mux_reg, pull_bit, pull_status) \
+ PU_PD_REG(NA, 0) \
+},
+
+struct pin_config {
+ char *name;
+ const unsigned int mux_reg;
+ unsigned char debug;
+
+ const unsigned char mask_offset;
+ const unsigned char mask;
+
+ const char *pull_name;
+ const unsigned int pull_reg;
+ const unsigned char pull_val;
+ const unsigned char pull_bit;
+
+ const char *pu_pd_name;
+ const unsigned int pu_pd_reg;
+ const unsigned char pu_pd_val;
+
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+ const char *mux_reg_name;
+#endif
+
+};
+
+struct omap_mux_cfg {
+ struct pin_config *pins;
+ unsigned long size;
+ int (*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif