summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-sa1100/nanoengine.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-sa1100/nanoengine.c')
-rw-r--r--arch/arm/mach-sa1100/nanoengine.c136
1 files changed, 136 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
new file mode 100644
index 000000000..f6c9c19c3
--- /dev/null
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-sa1100/nanoengine.c
+ *
+ * Bright Star Engineering's nanoEngine board init code.
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
+ */
+
+#include <linux/init.h>
+#include <linux/gpio/machine.h>
+#include <linux/kernel.h>
+#include <linux/platform_data/sa11x0-serial.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/root_dev.h>
+
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/nanoengine.h>
+#include <mach/irqs.h>
+
+#include "generic.h"
+
+/* Flash bank 0 */
+static struct mtd_partition nanoengine_partitions[] = {
+ {
+ .name = "nanoEngine boot firmware and parameter table",
+ .size = 0x00010000, /* 32K */
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel/initrd reserved",
+ .size = 0x002f0000,
+ .offset = 0x00010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "experimental filesystem allocation",
+ .size = 0x00100000,
+ .offset = 0x00300000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data nanoengine_flash_data = {
+ .map_name = "jedec_probe",
+ .parts = nanoengine_partitions,
+ .nr_parts = ARRAY_SIZE(nanoengine_partitions),
+};
+
+static struct resource nanoengine_flash_resources[] = {
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+ DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
+};
+
+static struct map_desc nanoengine_io_desc[] __initdata = {
+ {
+ /* System Registers */
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0x10000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, {
+ /* Internal PCI Memory Read/Write */
+ .virtual = NANO_PCI_MEM_RW_VIRT,
+ .pfn = __phys_to_pfn(NANO_PCI_MEM_RW_PHYS),
+ .length = NANO_PCI_MEM_RW_SIZE,
+ .type = MT_DEVICE
+ }, {
+ /* Internal PCI Config Space */
+ .virtual = NANO_PCI_CONFIG_SPACE_VIRT,
+ .pfn = __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS),
+ .length = NANO_PCI_CONFIG_SPACE_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init nanoengine_map_io(void)
+{
+ sa1100_map_io();
+ iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
+
+ sa1100_register_uart(0, 1);
+ sa1100_register_uart(1, 2);
+ sa1100_register_uart(2, 3);
+ Ser1SDCR0 |= SDCR0_UART;
+ /* disable IRDA -- UART2 is used as a normal serial port */
+ Ser2UTCR4 = 0;
+ Ser2HSCR0 = 0;
+}
+
+static struct gpiod_lookup_table nanoengine_pcmcia0_gpio_table = {
+ .dev_id = "sa11x0-pcmcia.0",
+ .table = {
+ GPIO_LOOKUP("gpio", 11, "ready", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio", 13, "detect", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio", 15, "reset", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table nanoengine_pcmcia1_gpio_table = {
+ .dev_id = "sa11x0-pcmcia.1",
+ .table = {
+ GPIO_LOOKUP("gpio", 12, "ready", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio", 14, "detect", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio", 16, "reset", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static void __init nanoengine_init(void)
+{
+ sa11x0_register_pcmcia(0, &nanoengine_pcmcia0_gpio_table);
+ sa11x0_register_pcmcia(1, &nanoengine_pcmcia1_gpio_table);
+ sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
+ ARRAY_SIZE(nanoengine_flash_resources));
+}
+
+MACHINE_START(NANOENGINE, "BSE nanoEngine")
+ .atag_offset = 0x100,
+ .map_io = nanoengine_map_io,
+ .nr_irqs = SA1100_NR_IRQS,
+ .init_irq = sa1100_init_irq,
+ .init_time = sa1100_timer_init,
+ .init_machine = nanoengine_init,
+ .init_late = sa11x0_init_late,
+ .restart = sa11x0_restart,
+MACHINE_END