summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-tegra/sleep-tegra30.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-tegra/sleep-tegra30.S')
-rw-r--r--arch/arm/mach-tegra/sleep-tegra30.S907
1 files changed, 907 insertions, 0 deletions
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
new file mode 100644
index 000000000..0cc40b6b2
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -0,0 +1,907 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/linkage.h>
+
+#include <soc/tegra/flowctrl.h>
+#include <soc/tegra/fuse.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/cache.h>
+
+#include "irammap.h"
+#include "sleep.h"
+
+#define EMC_CFG 0xc
+#define EMC_ADR_CFG 0x10
+#define EMC_TIMING_CONTROL 0x28
+#define EMC_NOP 0xdc
+#define EMC_SELF_REF 0xe0
+#define EMC_MRW 0xe8
+#define EMC_FBIO_CFG5 0x104
+#define EMC_AUTO_CAL_CONFIG 0x2a4
+#define EMC_AUTO_CAL_INTERVAL 0x2a8
+#define EMC_AUTO_CAL_STATUS 0x2ac
+#define EMC_REQ_CTRL 0x2b0
+#define EMC_CFG_DIG_DLL 0x2bc
+#define EMC_EMC_STATUS 0x2b4
+#define EMC_ZCAL_INTERVAL 0x2e0
+#define EMC_ZQ_CAL 0x2ec
+#define EMC_XM2VTTGENPADCTRL 0x310
+#define EMC_XM2VTTGENPADCTRL2 0x314
+
+#define PMC_CTRL 0x0
+#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
+
+#define PMC_PLLP_WB0_OVERRIDE 0xf8
+#define PMC_IO_DPD_REQ 0x1b8
+#define PMC_IO_DPD_STATUS 0x1bc
+
+#define CLK_RESET_CCLK_BURST 0x20
+#define CLK_RESET_CCLK_DIVIDER 0x24
+#define CLK_RESET_SCLK_BURST 0x28
+#define CLK_RESET_SCLK_DIVIDER 0x2c
+
+#define CLK_RESET_PLLC_BASE 0x80
+#define CLK_RESET_PLLC_MISC 0x8c
+#define CLK_RESET_PLLM_BASE 0x90
+#define CLK_RESET_PLLM_MISC 0x9c
+#define CLK_RESET_PLLP_BASE 0xa0
+#define CLK_RESET_PLLP_MISC 0xac
+#define CLK_RESET_PLLA_BASE 0xb0
+#define CLK_RESET_PLLA_MISC 0xbc
+#define CLK_RESET_PLLX_BASE 0xe0
+#define CLK_RESET_PLLX_MISC 0xe4
+#define CLK_RESET_PLLX_MISC3 0x518
+#define CLK_RESET_PLLX_MISC3_IDDQ 3
+#define CLK_RESET_PLLM_MISC_IDDQ 5
+#define CLK_RESET_PLLC_MISC_IDDQ 26
+#define CLK_RESET_PLLP_RESHIFT 0x528
+#define CLK_RESET_PLLP_RESHIFT_DEFAULT 0x3b
+#define CLK_RESET_PLLP_RESHIFT_ENABLE 0x3
+
+#define CLK_RESET_CLK_SOURCE_MSELECT 0x3b4
+
+#define MSELECT_CLKM (0x3 << 30)
+
+#define LOCK_DELAY 50 /* safety delay after lock is detected */
+
+#define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */
+
+#define PLLA_STORE_MASK (1 << 0)
+#define PLLC_STORE_MASK (1 << 1)
+#define PLLM_STORE_MASK (1 << 2)
+#define PLLP_STORE_MASK (1 << 3)
+#define PLLX_STORE_MASK (1 << 4)
+#define PLLM_PMC_STORE_MASK (1 << 5)
+
+.macro emc_device_mask, rd, base
+ ldr \rd, [\base, #EMC_ADR_CFG]
+ tst \rd, #0x1
+ moveq \rd, #(0x1 << 8) @ just 1 device
+ movne \rd, #(0x3 << 8) @ 2 devices
+.endm
+
+.macro emc_timing_update, rd, base
+ mov \rd, #1
+ str \rd, [\base, #EMC_TIMING_CONTROL]
+1001:
+ ldr \rd, [\base, #EMC_EMC_STATUS]
+ tst \rd, #(0x1<<23) @ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear
+ bne 1001b
+.endm
+
+.macro test_pll_state, rd, test_mask
+ ldr \rd, tegra_pll_state
+ tst \rd, #\test_mask
+.endm
+
+.macro store_pll_state, rd, tmp, r_car_base, pll_base, pll_mask
+ ldr \rd, [\r_car_base, #\pll_base]
+ tst \rd, #(1 << 30)
+ ldr \rd, tegra_pll_state
+ biceq \rd, \rd, #\pll_mask
+ orrne \rd, \rd, #\pll_mask
+ adr \tmp, tegra_pll_state
+ str \rd, [\tmp]
+.endm
+
+.macro store_pllm_pmc_state, rd, tmp, pmc_base
+ ldr \rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+ tst \rd, #(1 << 12)
+ ldr \rd, tegra_pll_state
+ biceq \rd, \rd, #PLLM_PMC_STORE_MASK
+ orrne \rd, \rd, #PLLM_PMC_STORE_MASK
+ adr \tmp, tegra_pll_state
+ str \rd, [\tmp]
+.endm
+
+.macro pllm_pmc_enable, rd, pmc_base
+ test_pll_state \rd, PLLM_PMC_STORE_MASK
+
+ ldrne \rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+ orrne \rd, \rd, #(1 << 12)
+ strne \rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+.endm
+
+.macro pll_enable, rd, r_car_base, pll_base, pll_misc, test_mask
+ test_pll_state \rd, \test_mask
+ beq 1f
+
+ ldr \rd, [\r_car_base, #\pll_base]
+ tst \rd, #(1 << 30)
+ orreq \rd, \rd, #(1 << 30)
+ streq \rd, [\r_car_base, #\pll_base]
+ /* Enable lock detector */
+ .if \pll_misc
+ ldr \rd, [\r_car_base, #\pll_misc]
+ bic \rd, \rd, #(1 << 18)
+ str \rd, [\r_car_base, #\pll_misc]
+ ldr \rd, [\r_car_base, #\pll_misc]
+ ldr \rd, [\r_car_base, #\pll_misc]
+ orr \rd, \rd, #(1 << 18)
+ str \rd, [\r_car_base, #\pll_misc]
+ .endif
+1:
+.endm
+
+.macro pll_locked, rd, r_car_base, pll_base, test_mask
+ test_pll_state \rd, \test_mask
+ beq 2f
+1:
+ ldr \rd, [\r_car_base, #\pll_base]
+ tst \rd, #(1 << 27)
+ beq 1b
+2:
+.endm
+
+.macro pll_iddq_exit, rd, car, iddq, iddq_bit
+ ldr \rd, [\car, #\iddq]
+ bic \rd, \rd, #(1<<\iddq_bit)
+ str \rd, [\car, #\iddq]
+.endm
+
+.macro pll_iddq_entry, rd, car, iddq, iddq_bit
+ ldr \rd, [\car, #\iddq]
+ orr \rd, \rd, #(1<<\iddq_bit)
+ str \rd, [\car, #\iddq]
+.endm
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra30_hotplug_shutdown(void)
+ *
+ * Powergates the current CPU.
+ * Should never return.
+ */
+ENTRY(tegra30_hotplug_shutdown)
+ /* Powergate this CPU */
+ mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+ bl tegra30_cpu_shutdown
+ ret lr @ should never get here
+ENDPROC(tegra30_hotplug_shutdown)
+
+/*
+ * tegra30_cpu_shutdown(unsigned long flags)
+ *
+ * Puts the current CPU in wait-for-event mode on the flow controller
+ * and powergates it -- flags (in R0) indicate the request type.
+ *
+ * r10 = SoC ID
+ * corrupts r0-r4, r10-r12
+ */
+ENTRY(tegra30_cpu_shutdown)
+ cpu_id r3
+ tegra_get_soc_id TEGRA_APB_MISC_VIRT, r10
+ cmp r10, #TEGRA30
+ bne _no_cpu0_chk @ It's not Tegra30
+
+ cmp r3, #0
+ reteq lr @ Must never be called for CPU 0
+_no_cpu0_chk:
+
+ ldr r12, =TEGRA_FLOW_CTRL_VIRT
+ cpu_to_csr_reg r1, r3
+ add r1, r1, r12 @ virtual CSR address for this CPU
+ cpu_to_halt_reg r2, r3
+ add r2, r2, r12 @ virtual HALT_EVENTS address for this CPU
+
+ /*
+ * Clear this CPU's "event" and "interrupt" flags and power gate
+ * it when halting but not before it is in the "WFE" state.
+ */
+ movw r12, \
+ FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
+ FLOW_CTRL_CSR_ENABLE
+ cmp r10, #TEGRA30
+ moveq r4, #(1 << 4) @ wfe bitmap
+ movne r4, #(1 << 8) @ wfi bitmap
+ ARM( orr r12, r12, r4, lsl r3 )
+ THUMB( lsl r4, r4, r3 )
+ THUMB( orr r12, r12, r4 )
+ str r12, [r1]
+
+ /* Halt this CPU. */
+ mov r3, #0x400
+delay_1:
+ subs r3, r3, #1 @ delay as a part of wfe war.
+ bge delay_1;
+ cpsid a @ disable imprecise aborts.
+ ldr r3, [r1] @ read CSR
+ str r3, [r1] @ clear CSR
+
+ tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+ beq flow_ctrl_setting_for_lp2
+
+ /* flow controller set up for hotplug */
+ mov r3, #FLOW_CTRL_WAITEVENT @ For hotplug
+ b flow_ctrl_done
+flow_ctrl_setting_for_lp2:
+ /* flow controller set up for LP2 */
+ cmp r10, #TEGRA30
+ moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2
+ movne r3, #FLOW_CTRL_WAITEVENT
+ orrne r3, r3, #FLOW_CTRL_HALT_GIC_IRQ
+ orrne r3, r3, #FLOW_CTRL_HALT_GIC_FIQ
+flow_ctrl_done:
+ cmp r10, #TEGRA30
+ str r3, [r2]
+ ldr r0, [r2]
+ b wfe_war
+
+__cpu_reset_again:
+ dsb
+ .align 5
+ wfeeq @ CPU should be power gated here
+ wfine
+wfe_war:
+ b __cpu_reset_again
+
+ /*
+ * 38 nop's, which fills rest of wfe cache line and
+ * 4 more cachelines with nop
+ */
+ .rept 38
+ nop
+ .endr
+ b . @ should never get here
+
+ENDPROC(tegra30_cpu_shutdown)
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * tegra30_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the MMU and jumping to
+ * tegra30_tear_down_core in IRAM
+ */
+ENTRY(tegra30_sleep_core_finish)
+ mov r4, r0
+ /* Flush, disable the L1 data cache and exit SMP */
+ mov r0, #TEGRA_FLUSH_CACHE_ALL
+ bl tegra_disable_clean_inv_dcache
+ mov r0, r4
+
+ /*
+ * Preload all the address literals that are needed for the
+ * CPU power-gating process, to avoid loading from SDRAM which
+ * are not supported once SDRAM is put into self-refresh.
+ * LP0 / LP1 use physical address, since the MMU needs to be
+ * disabled before putting SDRAM into self-refresh to avoid
+ * memory access due to page table walks.
+ */
+ mov32 r4, TEGRA_PMC_BASE
+ mov32 r5, TEGRA_CLK_RESET_BASE
+ mov32 r6, TEGRA_FLOW_CTRL_BASE
+ mov32 r7, TEGRA_TMRUS_BASE
+
+ mov32 r3, tegra_shut_off_mmu
+ add r3, r3, r0
+
+ mov32 r0, tegra30_tear_down_core
+ mov32 r1, tegra30_iram_start
+ sub r0, r0, r1
+ mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA
+ add r0, r0, r1
+
+ ret r3
+ENDPROC(tegra30_sleep_core_finish)
+
+/*
+ * tegra30_pm_secondary_cpu_suspend(unsigned long unused_arg)
+ *
+ * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
+ */
+ENTRY(tegra30_pm_secondary_cpu_suspend)
+ mov r7, lr
+
+ /* Flush and disable the L1 data cache */
+ mov r0, #TEGRA_FLUSH_CACHE_LOUIS
+ bl tegra_disable_clean_inv_dcache
+
+ /* Powergate this CPU. */
+ mov r0, #0 @ power mode flags (!hotplug)
+ bl tegra30_cpu_shutdown
+ mov r0, #1 @ never return here
+ ret r7
+ENDPROC(tegra30_pm_secondary_cpu_suspend)
+
+/*
+ * tegra30_tear_down_cpu
+ *
+ * Switches the CPU to enter sleep.
+ */
+ENTRY(tegra30_tear_down_cpu)
+ mov32 r6, TEGRA_FLOW_CTRL_BASE
+
+ b tegra30_enter_sleep
+ENDPROC(tegra30_tear_down_cpu)
+
+/* START OF ROUTINES COPIED TO IRAM */
+ .align L1_CACHE_SHIFT
+ .globl tegra30_iram_start
+tegra30_iram_start:
+
+/*
+ * tegra30_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
+ */
+ENTRY(tegra30_lp1_reset)
+ /*
+ * The CPU and system bus are running at 32KHz and executing from
+ * IRAM when this code is executed; immediately switch to CLKM and
+ * enable PLLP, PLLM, PLLC, PLLA and PLLX.
+ */
+ mov32 r0, TEGRA_CLK_RESET_BASE
+
+ mov r1, #(1 << 28)
+ str r1, [r0, #CLK_RESET_SCLK_BURST]
+ str r1, [r0, #CLK_RESET_CCLK_BURST]
+ mov r1, #0
+ str r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+ str r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+ cmp r10, #TEGRA30
+ beq _no_pll_iddq_exit
+
+ pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ
+ pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ
+ pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+
+ mov32 r7, TEGRA_TMRUS_BASE
+ ldr r1, [r7]
+ add r1, r1, #2
+ wait_until r1, r7, r3
+
+ /* enable PLLM via PMC */
+ mov32 r2, TEGRA_PMC_BASE
+ pllm_pmc_enable r1, r2
+
+ pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0, PLLM_STORE_MASK
+ pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0, PLLC_STORE_MASK
+ pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0, PLLX_STORE_MASK
+
+ b _pll_m_c_x_done
+
+_no_pll_iddq_exit:
+ /* enable PLLM via PMC */
+ mov32 r2, TEGRA_PMC_BASE
+ pllm_pmc_enable r1, r2
+
+ pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC, PLLM_STORE_MASK
+ pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC, PLLC_STORE_MASK
+
+_pll_m_c_x_done:
+ pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC, PLLP_STORE_MASK
+ pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC, PLLA_STORE_MASK
+
+ pll_locked r1, r0, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+ pll_locked r1, r0, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+ pll_locked r1, r0, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK
+ pll_locked r1, r0, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+
+ /*
+ * CPUFreq driver could select other PLL for CPU. PLLX will be
+ * enabled by the Tegra30 CLK driver on an as-needed basis, see
+ * tegra30_cpu_clock_resume().
+ */
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+ cmp r1, #TEGRA30
+ beq 1f
+
+ pll_locked r1, r0, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK
+
+ ldr r1, [r0, #CLK_RESET_PLLP_BASE]
+ bic r1, r1, #(1<<31) @ disable PllP bypass
+ str r1, [r0, #CLK_RESET_PLLP_BASE]
+
+ mov r1, #CLK_RESET_PLLP_RESHIFT_DEFAULT
+ str r1, [r0, #CLK_RESET_PLLP_RESHIFT]
+1:
+
+ mov32 r7, TEGRA_TMRUS_BASE
+ ldr r1, [r7]
+ add r1, r1, #LOCK_DELAY
+ wait_until r1, r7, r3
+
+ adr r5, tegra_sdram_pad_save
+
+ ldr r4, [r5, #0x18] @ restore CLK_SOURCE_MSELECT
+ str r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+ ldr r4, [r5, #0x1C] @ restore SCLK_BURST
+ str r4, [r0, #CLK_RESET_SCLK_BURST]
+
+ movw r4, #:lower16:((1 << 28) | (0x4)) @ burst policy is PLLP
+ movt r4, #:upper16:((1 << 28) | (0x4))
+ str r4, [r0, #CLK_RESET_CCLK_BURST]
+
+ /* Restore pad power state to normal */
+ ldr r1, [r5, #0x14] @ PMC_IO_DPD_STATUS
+ mvn r1, r1
+ bic r1, r1, #(1 << 31)
+ orr r1, r1, #(1 << 30)
+ str r1, [r2, #PMC_IO_DPD_REQ] @ DPD_OFF
+
+ cmp r10, #TEGRA30
+ movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base
+ movteq r0, #:upper16:TEGRA_EMC_BASE
+ cmp r10, #TEGRA114
+ movweq r0, #:lower16:TEGRA_EMC0_BASE
+ movteq r0, #:upper16:TEGRA_EMC0_BASE
+ cmp r10, #TEGRA124
+ movweq r0, #:lower16:TEGRA124_EMC_BASE
+ movteq r0, #:upper16:TEGRA124_EMC_BASE
+
+exit_self_refresh:
+ ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
+ str r1, [r0, #EMC_XM2VTTGENPADCTRL]
+ ldr r1, [r5, #0x10] @ restore EMC_XM2VTTGENPADCTRL2
+ str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+ ldr r1, [r5, #0x8] @ restore EMC_AUTO_CAL_INTERVAL
+ str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+
+ /* Relock DLL */
+ ldr r1, [r0, #EMC_CFG_DIG_DLL]
+ orr r1, r1, #(1 << 30) @ set DLL_RESET
+ str r1, [r0, #EMC_CFG_DIG_DLL]
+
+ emc_timing_update r1, r0
+
+ cmp r10, #TEGRA114
+ movweq r1, #:lower16:TEGRA_EMC1_BASE
+ movteq r1, #:upper16:TEGRA_EMC1_BASE
+ cmpeq r0, r1
+
+ ldr r1, [r0, #EMC_AUTO_CAL_CONFIG]
+ orr r1, r1, #(1 << 31) @ set AUTO_CAL_ACTIVE
+ orreq r1, r1, #(1 << 27) @ set slave mode for channel 1
+ str r1, [r0, #EMC_AUTO_CAL_CONFIG]
+
+emc_wait_auto_cal_onetime:
+ ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
+ tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
+ bne emc_wait_auto_cal_onetime
+
+ ldr r1, [r0, #EMC_CFG]
+ bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP_PD
+ str r1, [r0, #EMC_CFG]
+
+ mov r1, #0
+ str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh
+ mov r1, #1
+ cmp r10, #TEGRA30
+ streq r1, [r0, #EMC_NOP]
+ streq r1, [r0, #EMC_NOP]
+
+ emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+ ldr r2, [r0, #EMC_EMC_STATUS]
+ ands r2, r2, r1
+ bne exit_selfrefresh_loop
+
+ lsr r1, r1, #8 @ devSel, bit0:dev0, bit1:dev1
+
+ mov32 r7, TEGRA_TMRUS_BASE
+ ldr r2, [r0, #EMC_FBIO_CFG5]
+
+ and r2, r2, #3 @ check DRAM_TYPE
+ cmp r2, #2
+ beq emc_lpddr2
+
+ /* Issue a ZQ_CAL for dev0 - DDR3 */
+ mov32 r2, 0x80000011 @ DEV_SELECTION=2, LENGTH=LONG, CMD=1
+ str r2, [r0, #EMC_ZQ_CAL]
+ ldr r2, [r7]
+ add r2, r2, #10
+ wait_until r2, r7, r3
+
+ tst r1, #2
+ beq zcal_done
+
+ /* Issue a ZQ_CAL for dev1 - DDR3 */
+ mov32 r2, 0x40000011 @ DEV_SELECTION=1, LENGTH=LONG, CMD=1
+ str r2, [r0, #EMC_ZQ_CAL]
+ ldr r2, [r7]
+ add r2, r2, #10
+ wait_until r2, r7, r3
+ b zcal_done
+
+emc_lpddr2:
+ /* Issue a ZQ_CAL for dev0 - LPDDR2 */
+ mov32 r2, 0x800A00AB @ DEV_SELECTION=2, MA=10, OP=0xAB
+ str r2, [r0, #EMC_MRW]
+ ldr r2, [r7]
+ add r2, r2, #1
+ wait_until r2, r7, r3
+
+ tst r1, #2
+ beq zcal_done
+
+ /* Issue a ZQ_CAL for dev0 - LPDDR2 */
+ mov32 r2, 0x400A00AB @ DEV_SELECTION=1, MA=10, OP=0xAB
+ str r2, [r0, #EMC_MRW]
+ ldr r2, [r7]
+ add r2, r2, #1
+ wait_until r2, r7, r3
+
+zcal_done:
+ mov r1, #0 @ unstall all transactions
+ str r1, [r0, #EMC_REQ_CTRL]
+ ldr r1, [r5, #0x4] @ restore EMC_ZCAL_INTERVAL
+ str r1, [r0, #EMC_ZCAL_INTERVAL]
+ ldr r1, [r5, #0x0] @ restore EMC_CFG
+ str r1, [r0, #EMC_CFG]
+
+ emc_timing_update r1, r0
+
+ /* Tegra114 had dual EMC channel, now config the other one */
+ cmp r10, #TEGRA114
+ bne __no_dual_emc_chanl
+ mov32 r1, TEGRA_EMC1_BASE
+ cmp r0, r1
+ movne r0, r1
+ addne r5, r5, #0x20
+ bne exit_self_refresh
+__no_dual_emc_chanl:
+
+ mov32 r0, TEGRA_PMC_BASE
+ ldr r0, [r0, #PMC_SCRATCH41]
+ ret r0 @ jump to tegra_resume
+ENDPROC(tegra30_lp1_reset)
+
+ .align L1_CACHE_SHIFT
+tegra30_sdram_pad_address:
+ .word TEGRA_EMC_BASE + EMC_CFG @0x0
+ .word TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
+ .word TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
+ .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
+ .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
+ .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
+tegra30_sdram_pad_address_end:
+
+tegra114_sdram_pad_address:
+ .word TEGRA_EMC0_BASE + EMC_CFG @0x0
+ .word TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL @0x4
+ .word TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL @0x8
+ .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL @0xc
+ .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
+ .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
+ .word TEGRA_EMC1_BASE + EMC_CFG @0x20
+ .word TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL @0x24
+ .word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28
+ .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c
+ .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
+tegra114_sdram_pad_adress_end:
+
+tegra124_sdram_pad_address:
+ .word TEGRA124_EMC_BASE + EMC_CFG @0x0
+ .word TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
+ .word TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
+ .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
+ .word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
+ .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
+ .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
+tegra124_sdram_pad_address_end:
+
+tegra30_sdram_pad_size:
+ .word tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
+
+tegra114_sdram_pad_size:
+ .word tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address
+
+ .type tegra_sdram_pad_save, %object
+tegra_sdram_pad_save:
+ .rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4
+ .long 0
+ .endr
+
+tegra_pll_state:
+ .word 0x0
+
+/*
+ * tegra30_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra30_tear_down_core:
+ bl tegra30_sdram_self_refresh
+ bl tegra30_switch_cpu_to_clk32k
+ b tegra30_enter_sleep
+
+/*
+ * tegra30_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK
+ * to the 32KHz clock.
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_switch_cpu_to_clk32k:
+ /*
+ * start by jumping to CLKM to safely disable PLLs, then jump to
+ * CLKS.
+ */
+ mov r0, #(1 << 28)
+ str r0, [r5, #CLK_RESET_SCLK_BURST]
+ /* 2uS delay delay between changing SCLK and CCLK */
+ ldr r1, [r7]
+ add r1, r1, #2
+ wait_until r1, r7, r9
+ str r0, [r5, #CLK_RESET_CCLK_BURST]
+ mov r0, #0
+ str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+ str r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+ /* switch the clock source of mselect to be CLK_M */
+ ldr r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+ orr r0, r0, #MSELECT_CLKM
+ str r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+ /* 2uS delay delay between changing SCLK and disabling PLLs */
+ ldr r1, [r7]
+ add r1, r1, #2
+ wait_until r1, r7, r9
+
+ /* store enable-state of PLLs */
+ store_pll_state r0, r1, r5, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK
+ store_pll_state r0, r1, r5, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+ store_pll_state r0, r1, r5, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+ store_pll_state r0, r1, r5, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+ store_pll_state r0, r1, r5, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK
+ store_pllm_pmc_state r0, r1, r4
+
+ /* disable PLLM via PMC in LP1 */
+ ldr r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+ bic r0, r0, #(1 << 12)
+ str r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+
+ /* disable PLLP, PLLA, PLLC and PLLX */
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+ cmp r1, #TEGRA30
+ ldr r0, [r5, #CLK_RESET_PLLP_BASE]
+ orrne r0, r0, #(1 << 31) @ enable PllP bypass on fast cluster
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLP_BASE]
+ beq 1f
+ mov r0, #CLK_RESET_PLLP_RESHIFT_ENABLE
+ str r0, [r5, #CLK_RESET_PLLP_RESHIFT]
+1:
+ ldr r0, [r5, #CLK_RESET_PLLA_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLA_BASE]
+ ldr r0, [r5, #CLK_RESET_PLLC_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLC_BASE]
+ ldr r0, [r5, #CLK_RESET_PLLX_BASE]
+ bic r0, r0, #(1 << 30)
+ str r0, [r5, #CLK_RESET_PLLX_BASE]
+
+ cmp r10, #TEGRA30
+ beq _no_pll_in_iddq
+ pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+_no_pll_in_iddq:
+
+ /*
+ * Switch to clk_s (32KHz); bits 28:31=0
+ * Enable burst on CPU IRQ; bit 24=1
+ * Set IRQ burst clock source to clk_m; bits 10:8=0
+ */
+ mov r0, #(1 << 24)
+ str r0, [r5, #CLK_RESET_SCLK_BURST]
+
+ ret lr
+
+/*
+ * tegra30_enter_sleep
+ *
+ * uses flow controller to enter sleep state
+ * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
+ * executes from SDRAM with target state is LP2
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ */
+tegra30_enter_sleep:
+ cpu_id r1
+
+ cpu_to_csr_reg r2, r1
+ ldr r0, [r6, r2]
+ orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+ orr r0, r0, #FLOW_CTRL_CSR_ENABLE
+ str r0, [r6, r2]
+
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+ cmp r10, #TEGRA30
+ mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
+ orreq r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+ orrne r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ
+
+ cpu_to_halt_reg r2, r1
+ str r0, [r6, r2]
+ dsb
+ ldr r0, [r6, r2] /* memory barrier */
+
+ cmp r10, #TEGRA30
+halted:
+ isb
+ dsb
+ wfine /* CPU should be power gated here */
+ wfeeq
+
+ /* !!!FIXME!!! Implement halt failure handler */
+ b halted
+
+/*
+ * tegra30_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * must be executed from IRAM
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_sdram_self_refresh:
+
+ adr r8, tegra_sdram_pad_save
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+ cmp r10, #TEGRA30
+ adreq r2, tegra30_sdram_pad_address
+ ldreq r3, tegra30_sdram_pad_size
+ cmp r10, #TEGRA114
+ adreq r2, tegra114_sdram_pad_address
+ ldreq r3, tegra114_sdram_pad_size
+ cmp r10, #TEGRA124
+ adreq r2, tegra124_sdram_pad_address
+ ldreq r3, tegra30_sdram_pad_size
+
+ mov r9, #0
+
+padsave:
+ ldr r0, [r2, r9] @ r0 is the addr in the pad_address
+
+ ldr r1, [r0]
+ str r1, [r8, r9] @ save the content of the addr
+
+ add r9, r9, #4
+ cmp r3, r9
+ bne padsave
+padsave_done:
+
+ dsb
+
+ cmp r10, #TEGRA30
+ ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr
+ cmp r10, #TEGRA114
+ ldreq r0, =TEGRA_EMC0_BASE
+ cmp r10, #TEGRA124
+ ldreq r0, =TEGRA124_EMC_BASE
+
+enter_self_refresh:
+ cmp r10, #TEGRA30
+ mov r1, #0
+ str r1, [r0, #EMC_ZCAL_INTERVAL]
+ str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+ ldr r1, [r0, #EMC_CFG]
+ bic r1, r1, #(1 << 28)
+ bicne r1, r1, #(1 << 29)
+ str r1, [r0, #EMC_CFG] @ disable DYN_SELF_REF
+
+ emc_timing_update r1, r0
+
+ ldr r1, [r7]
+ add r1, r1, #5
+ wait_until r1, r7, r2
+
+emc_wait_auto_cal:
+ ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
+ tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
+ bne emc_wait_auto_cal
+
+ mov r1, #3
+ str r1, [r0, #EMC_REQ_CTRL] @ stall incoming DRAM requests
+
+emcidle:
+ ldr r1, [r0, #EMC_EMC_STATUS]
+ tst r1, #4
+ beq emcidle
+
+ mov r1, #1
+ str r1, [r0, #EMC_SELF_REF]
+
+ emc_device_mask r1, r0
+
+emcself:
+ ldr r2, [r0, #EMC_EMC_STATUS]
+ and r2, r2, r1
+ cmp r2, r1
+ bne emcself @ loop until DDR in self-refresh
+
+ /* Put VTTGEN in the lowest power mode */
+ ldr r1, [r0, #EMC_XM2VTTGENPADCTRL]
+ mov32 r2, 0xF8F8FFFF @ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN
+ and r1, r1, r2
+ str r1, [r0, #EMC_XM2VTTGENPADCTRL]
+ ldr r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+ cmp r10, #TEGRA30
+ orreq r1, r1, #7 @ set E_NO_VTTGEN
+ orrne r1, r1, #0x3f
+ str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+
+ emc_timing_update r1, r0
+
+ /* Tegra114 had dual EMC channel, now config the other one */
+ cmp r10, #TEGRA114
+ bne no_dual_emc_chanl
+ mov32 r1, TEGRA_EMC1_BASE
+ cmp r0, r1
+ movne r0, r1
+ bne enter_self_refresh
+no_dual_emc_chanl:
+
+ ldr r1, [r4, #PMC_CTRL]
+ tst r1, #PMC_CTRL_SIDE_EFFECT_LP0
+ bne pmc_io_dpd_skip
+ /*
+ * Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK
+ * and COMP in the lowest power mode when LP1.
+ */
+ mov32 r1, 0x8EC00000
+ str r1, [r4, #PMC_IO_DPD_REQ]
+pmc_io_dpd_skip:
+
+ dsb
+
+ ret lr
+
+ .ltorg
+/* dummy symbol for end of IRAM */
+ .align L1_CACHE_SHIFT
+ .global tegra30_iram_end
+tegra30_iram_end:
+ b .
+#endif