diff options
Diffstat (limited to 'arch/powerpc/platforms/maple')
| -rw-r--r-- | arch/powerpc/platforms/maple/Kconfig | 19 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/Makefile | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/maple.h | 15 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/pci.c | 672 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/setup.c | 363 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/time.c | 170 |
6 files changed, 1241 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig new file mode 100644 index 000000000..4c058cc57 --- /dev/null +++ b/arch/powerpc/platforms/maple/Kconfig @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +config PPC_MAPLE + depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN + bool "Maple 970FX Evaluation Board" + select FORCE_PCI + select MPIC + select U3_DART + select MPIC_U3_HT_IRQS + select GENERIC_TBSYNC + select PPC_UDBG_16550 + select PPC_970_NAP + select PPC_64S_HASH_MMU + select PPC_HASH_MMU_NATIVE + select PPC_RTAS + select MMIO_NVRAM + select ATA_NONSTANDARD if ATA + help + This option enables support for the Maple 970FX Evaluation Board. + For more information, refer to <http://www.970eval.com> diff --git a/arch/powerpc/platforms/maple/Makefile b/arch/powerpc/platforms/maple/Makefile new file mode 100644 index 000000000..19f35ab82 --- /dev/null +++ b/arch/powerpc/platforms/maple/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-y += setup.o pci.o time.o diff --git a/arch/powerpc/platforms/maple/maple.h b/arch/powerpc/platforms/maple/maple.h new file mode 100644 index 000000000..4f358b55c --- /dev/null +++ b/arch/powerpc/platforms/maple/maple.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Declarations for maple-specific code. + * + * Maple is the name of a PPC970 evaluation board. + */ +extern int maple_set_rtc_time(struct rtc_time *tm); +extern void maple_get_rtc_time(struct rtc_time *tm); +extern time64_t maple_get_boot_time(void); +extern void maple_calibrate_decr(void); +extern void maple_pci_init(void); +extern void maple_pci_irq_fixup(struct pci_dev *dev); +extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel); + +extern struct pci_controller_ops maple_pci_controller_ops; diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c new file mode 100644 index 000000000..b911b3171 --- /dev/null +++ b/arch/powerpc/platforms/maple/pci.c @@ -0,0 +1,672 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), + * IBM Corp. + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/of_irq.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/iommu.h> +#include <asm/ppc-pci.h> +#include <asm/isa-bridge.h> + +#include "maple.h" + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static struct pci_controller *u3_agp, *u3_ht, *u4_pcie; + +static int __init fixup_one_level_bus_range(struct device_node *node, int higher) +{ + for (; node; node = node->sibling) { + const int *bus_range; + const unsigned int *class_code; + int len; + + /* For PCI<->PCI bridges or CardBus bridges, we go down */ + class_code = of_get_property(node, "class-code", NULL); + if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + bus_range = of_get_property(node, "bus-range", &len); + if (bus_range != NULL && len > 2 * sizeof(int)) { + if (bus_range[1] > higher) + higher = bus_range[1]; + } + higher = fixup_one_level_bus_range(node->child, higher); + } + return higher; +} + +/* This routine fixes the "bus-range" property of all bridges in the + * system since they tend to have their "last" member wrong on macs + * + * Note that the bus numbers manipulated here are OF bus numbers, they + * are not Linux bus numbers. + */ +static void __init fixup_bus_range(struct device_node *bridge) +{ + int *bus_range; + struct property *prop; + int len; + + /* Lookup the "bus-range" property for the hose */ + prop = of_find_property(bridge, "bus-range", &len); + if (prop == NULL || prop->value == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %pOF\n", + bridge); + return; + } + bus_range = prop->value; + bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); +} + + +static unsigned long u3_agp_cfa0(u8 devfn, u8 off) +{ + return (1 << (unsigned long)PCI_SLOT(devfn)) | + ((unsigned long)PCI_FUNC(devfn) << 8) | + ((unsigned long)off & 0xFCUL); +} + +static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off) +{ + return ((unsigned long)bus << 16) | + ((unsigned long)devfn << 8) | + ((unsigned long)off & 0xFCUL) | + 1UL; +} + +static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, u8 offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) { + if (dev_fn < (11 << 3)) + return NULL; + caddr = u3_agp_cfa0(dev_fn, offset); + } else + caddr = u3_agp_cfa1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= 0x07; + return hose->cfg_data + offset; +} + +static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + volatile void __iomem *addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = in_le16(addr); + break; + default: + *val = in_le32(addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + volatile void __iomem *addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8(addr, val); + break; + case 2: + out_le16(addr, val); + break; + default: + out_le32(addr, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_agp_pci_ops = +{ + .read = u3_agp_read_config, + .write = u3_agp_write_config, +}; + +static unsigned long u3_ht_cfa0(u8 devfn, u8 off) +{ + return (devfn << 8) | off; +} + +static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off) +{ + return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL; +} + +static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose, + u8 bus, u8 devfn, u8 offset) +{ + if (bus == hose->first_busno) { + if (PCI_SLOT(devfn) == 0) + return NULL; + return hose->cfg_data + u3_ht_cfa0(devfn, offset); + } else + return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset); +} + +static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset, + int len, u32 *val) +{ + volatile void __iomem *addr; + + addr = hose->cfg_addr; + addr += ((offset & ~3) << 2) + (4 - len - (offset & 3)); + + switch (len) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = in_be16(addr); + break; + default: + *val = in_be32(addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset, + int len, u32 val) +{ + volatile void __iomem *addr; + + addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3)); + + if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST) + return PCIBIOS_SUCCESSFUL; + + switch (len) { + case 1: + out_8(addr, val); + break; + case 2: + out_be16(addr, val); + break; + default: + out_be32(addr, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + volatile void __iomem *addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0)) + return u3_ht_root_read_config(hose, offset, len, val); + + if (offset > 0xff) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = in_le16(addr); + break; + default: + *val = in_le32(addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + volatile void __iomem *addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0)) + return u3_ht_root_write_config(hose, offset, len, val); + + if (offset > 0xff) + return PCIBIOS_BAD_REGISTER_NUMBER; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8(addr, val); + break; + case 2: + out_le16(addr, val); + break; + default: + out_le32(addr, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_ht_pci_ops = +{ + .read = u3_ht_read_config, + .write = u3_ht_write_config, +}; + +static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off) +{ + return (1 << PCI_SLOT(devfn)) | + (PCI_FUNC(devfn) << 8) | + ((off >> 8) << 28) | + (off & 0xfcu); +} + +static unsigned int u4_pcie_cfa1(unsigned int bus, unsigned int devfn, + unsigned int off) +{ + return (bus << 16) | + (devfn << 8) | + ((off >> 8) << 28) | + (off & 0xfcu) | 1u; +} + +static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, int offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) + caddr = u4_pcie_cfa0(dev_fn, offset); + else + caddr = u4_pcie_cfa1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= 0x03; + return hose->cfg_data + offset; +} + +static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + volatile void __iomem *addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = in_le16(addr); + break; + default: + *val = in_le32(addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} +static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + volatile void __iomem *addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8(addr, val); + break; + case 2: + out_le16(addr, val); + break; + default: + out_le32(addr, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u4_pcie_pci_ops = +{ + .read = u4_pcie_read_config, + .write = u4_pcie_write_config, +}; + +static void __init setup_u3_agp(struct pci_controller* hose) +{ + /* On G5, we move AGP up to high bus number so we don't need + * to reassign bus numbers for HT. If we ever have P2P bridges + * on AGP, we'll have to move pci_assign_all_buses to the + * pci_controller structure so we enable it for AGP and not for + * HT childs. + * We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->first_busno = 0xf0; + hose->last_busno = 0xff; + hose->ops = &u3_agp_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + u3_agp = hose; +} + +static void __init setup_u4_pcie(struct pci_controller* hose) +{ + /* We currently only implement the "non-atomic" config space, to + * be optimised later. + */ + hose->ops = &u4_pcie_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + u4_pcie = hose; +} + +static void __init setup_u3_ht(struct pci_controller* hose) +{ + hose->ops = &u3_ht_pci_ops; + + /* We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->cfg_data = ioremap(0xf2000000, 0x02000000); + hose->cfg_addr = ioremap(0xf8070000, 0x1000); + + hose->first_busno = 0; + hose->last_busno = 0xef; + + u3_ht = hose; +} + +static int __init maple_add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + char* disp_name; + const int *bus_range; + int primary = 1; + + DBG("Adding PCI host bridge %pOF\n", dev); + + bus_range = of_get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %pOF, assume bus 0\n", + dev); + } + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + hose->controller_ops = maple_pci_controller_ops; + + disp_name = NULL; + if (of_device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose); + disp_name = "U3-AGP"; + primary = 0; + } else if (of_device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose); + disp_name = "U3-HT"; + primary = 1; + } else if (of_device_is_compatible(dev, "u4-pcie")) { + setup_u4_pcie(hose); + disp_name = "U4-PCIE"; + primary = 0; + } + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", + disp_name, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); + + /* Check for legacy IOs */ + isa_bridge_find_early(hose); + + /* create pci_dn's for DT nodes under this PHB */ + pci_devs_phb_init_dynamic(hose); + + return 0; +} + + +void maple_pci_irq_fixup(struct pci_dev *dev) +{ + DBG(" -> maple_pci_irq_fixup\n"); + + /* Fixup IRQ for PCIe host */ + if (u4_pcie != NULL && dev->bus->number == 0 && + pci_bus_to_host(dev->bus) == u4_pcie) { + printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n"); + dev->irq = irq_create_mapping(NULL, 1); + if (dev->irq) + irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); + } + + /* Hide AMD8111 IDE interrupt when in legacy mode so + * the driver calls pci_get_legacy_ide_irq() + */ + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_8111_IDE && + (dev->class & 5) != 5) { + dev->irq = 0; + } + + DBG(" <- maple_pci_irq_fixup\n"); +} + +static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge) +{ + struct pci_controller *hose = pci_bus_to_host(bridge->bus); + struct device_node *np, *child; + + if (hose != u3_agp) + return 0; + + /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We + * assume there is no P2P bridge on the AGP bus, which should be a + * safe assumptions hopefully. + */ + np = hose->dn; + PCI_DN(np)->busno = 0xf0; + for_each_child_of_node(np, child) + PCI_DN(child)->busno = 0xf0; + + return 0; +} + +void __init maple_pci_init(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + /* Probe root PCI hosts, that is on U3 the AGP host and the + * HyperTransport host. That one is actually "kept" around + * and actually added last as it's resource management relies + * on the AGP resources to have been setup first + */ + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n"); + return; + } + for_each_child_of_node(root, np) { + if (!of_node_is_type(np, "pci") && !of_node_is_type(np, "ht")) + continue; + if ((of_device_is_compatible(np, "u4-pcie") || + of_device_is_compatible(np, "u3-agp")) && + maple_add_bridge(np) == 0) + of_node_get(np); + + if (of_device_is_compatible(np, "u3-ht")) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + + /* Now setup the HyperTransport host if we found any + */ + if (ht && maple_add_bridge(ht) != 0) + of_node_put(ht); + + ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare; + + /* Tell pci.c to not change any resource allocations. */ + pci_add_flags(PCI_PROBE_ONLY); +} + +int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) +{ + struct device_node *np; + unsigned int defirq = channel ? 15 : 14; + unsigned int irq; + + if (pdev->vendor != PCI_VENDOR_ID_AMD || + pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) + return defirq; + + np = pci_device_to_OF_node(pdev); + if (np == NULL) { + printk("Failed to locate OF node for IDE %s\n", + pci_name(pdev)); + return defirq; + } + irq = irq_of_parse_and_map(np, channel & 0x1); + if (!irq) { + printk("Failed to map onboard IDE interrupt for channel %d\n", + channel); + return defirq; + } + return irq; +} + +static void quirk_ipr_msi(struct pci_dev *dev) +{ + /* Something prevents MSIs from the IPR from working on Bimini, + * and the driver has no smarts to recover. So disable MSI + * on it for now. */ + + if (machine_is(maple)) { + dev->no_msi = 1; + dev_info(&dev->dev, "Quirk disabled MSI\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, + quirk_ipr_msi); + +struct pci_controller_ops maple_pci_controller_ops = { +}; diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c new file mode 100644 index 000000000..c26c379e1 --- /dev/null +++ b/arch/powerpc/platforms/maple/setup.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Maple (970 eval board) setup code + * + * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), + * IBM Corp. + */ + +#undef DEBUG + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/tty.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/major.h> +#include <linux/initrd.h> +#include <linux/vt_kern.h> +#include <linux/console.h> +#include <linux/pci.h> +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/serial.h> +#include <linux/smp.h> +#include <linux/bitops.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/memblock.h> + +#include <asm/processor.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/machdep.h> +#include <asm/dma.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/mpic.h> +#include <asm/rtas.h> +#include <asm/udbg.h> +#include <asm/nvram.h> + +#include "maple.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +static unsigned long maple_find_nvram_base(void) +{ + struct device_node *rtcs; + unsigned long result = 0; + + /* find NVRAM device */ + rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111"); + if (rtcs) { + struct resource r; + if (of_address_to_resource(rtcs, 0, &r)) { + printk(KERN_EMERG "Maple: Unable to translate NVRAM" + " address\n"); + goto bail; + } + if (!(r.flags & IORESOURCE_IO)) { + printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n"); + goto bail; + } + result = r.start; + } else + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + bail: + of_node_put(rtcs); + return result; +} + +static void __noreturn maple_restart(char *cmd) +{ + unsigned int maple_nvram_base; + const unsigned int *maple_nvram_offset, *maple_nvram_command; + struct device_node *sp; + + maple_nvram_base = maple_find_nvram_base(); + if (maple_nvram_base == 0) + goto fail; + + /* find service processor device */ + sp = of_find_node_by_name(NULL, "service-processor"); + if (!sp) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + goto fail; + } + maple_nvram_offset = of_get_property(sp, "restart-addr", NULL); + maple_nvram_command = of_get_property(sp, "restart-value", NULL); + of_node_put(sp); + + /* send command */ + outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset); + for (;;) ; + fail: + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + for (;;) ; +} + +static void __noreturn maple_power_off(void) +{ + unsigned int maple_nvram_base; + const unsigned int *maple_nvram_offset, *maple_nvram_command; + struct device_node *sp; + + maple_nvram_base = maple_find_nvram_base(); + if (maple_nvram_base == 0) + goto fail; + + /* find service processor device */ + sp = of_find_node_by_name(NULL, "service-processor"); + if (!sp) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + goto fail; + } + maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL); + maple_nvram_command = of_get_property(sp, "power-off-value", NULL); + of_node_put(sp); + + /* send command */ + outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset); + for (;;) ; + fail: + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + for (;;) ; +} + +static void __noreturn maple_halt(void) +{ + maple_power_off(); +} + +#ifdef CONFIG_SMP +static struct smp_ops_t maple_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .kick_cpu = smp_generic_kick_cpu, + .setup_cpu = smp_mpic_setup_cpu, + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +}; +#endif /* CONFIG_SMP */ + +static void __init maple_use_rtas_reboot_and_halt_if_present(void) +{ + if (rtas_service_present("system-reboot") && + rtas_service_present("power-off")) { + ppc_md.restart = rtas_restart; + pm_power_off = rtas_power_off; + ppc_md.halt = rtas_halt; + } +} + +static void __init maple_setup_arch(void) +{ + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + /* Setup SMP callback */ +#ifdef CONFIG_SMP + smp_ops = &maple_smp_ops; +#endif + maple_use_rtas_reboot_and_halt_if_present(); + + printk(KERN_DEBUG "Using native/NAP idle loop\n"); + + mmio_nvram_init(); +} + +/* + * This is almost identical to pSeries and CHRP. We need to make that + * code generic at one point, with appropriate bits in the device-tree to + * identify the presence of an HT APIC + */ +static void __init maple_init_IRQ(void) +{ + struct device_node *root, *np, *mpic_node = NULL; + const unsigned int *opprop; + unsigned long openpic_addr = 0; + int naddr, n, i, opplen, has_isus = 0; + struct mpic *mpic; + unsigned int flags = 0; + + /* Locate MPIC in the device-tree. Note that there is a bug + * in Maple device-tree where the type of the controller is + * open-pic and not interrupt-controller + */ + + for_each_node_by_type(np, "interrupt-controller") + if (of_device_is_compatible(np, "open-pic")) { + mpic_node = np; + break; + } + if (mpic_node == NULL) + for_each_node_by_type(np, "open-pic") { + mpic_node = np; + break; + } + if (mpic_node == NULL) { + printk(KERN_ERR + "Failed to locate the MPIC interrupt controller\n"); + return; + } + + /* Find address list in /platform-open-pic */ + root = of_find_node_by_path("/"); + naddr = of_n_addr_cells(root); + opprop = of_get_property(root, "platform-open-pic", &opplen); + if (opprop) { + openpic_addr = of_read_number(opprop, naddr); + has_isus = (opplen > naddr); + printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n", + openpic_addr, has_isus); + } + + BUG_ON(openpic_addr == 0); + + /* Check for a big endian MPIC */ + if (of_get_property(np, "big-endian", NULL) != NULL) + flags |= MPIC_BIG_ENDIAN; + + /* XXX Maple specific bits */ + flags |= MPIC_U3_HT_IRQS; + /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */ + flags |= MPIC_BIG_ENDIAN; + + /* Setup the openpic driver. More device-tree junks, we hard code no + * ISUs for now. I'll have to revisit some stuffs with the folks doing + * the firmware for those + */ + mpic = mpic_alloc(mpic_node, openpic_addr, flags, + /*has_isus ? 16 :*/ 0, 0, " MPIC "); + BUG_ON(mpic == NULL); + + /* Add ISUs */ + opplen /= sizeof(u32); + for (n = 0, i = naddr; i < opplen; i += naddr, n++) { + unsigned long isuaddr = of_read_number(opprop + i, naddr); + mpic_assign_isu(mpic, n, isuaddr); + } + + /* All ISUs are setup, complete initialization */ + mpic_init(mpic); + ppc_md.get_irq = mpic_get_irq; + of_node_put(mpic_node); + of_node_put(root); +} + +static void __init maple_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init maple_probe(void) +{ + if (!of_machine_is_compatible("Momentum,Maple") && + !of_machine_is_compatible("Momentum,Apache")) + return 0; + + pm_power_off = maple_power_off; + + iommu_init_early_dart(&maple_pci_controller_ops); + + return 1; +} + +#ifdef CONFIG_EDAC +/* + * Register a platform device for CPC925 memory controller on + * all boards with U3H (CPC925) bridge. + */ +static int __init maple_cpc925_edac_setup(void) +{ + struct platform_device *pdev; + struct device_node *np = NULL; + struct resource r; + int ret; + volatile void __iomem *mem; + u32 rev; + + np = of_find_node_by_type(NULL, "memory-controller"); + if (!np) { + printk(KERN_ERR "%s: Unable to find memory-controller node\n", + __func__); + return -ENODEV; + } + + ret = of_address_to_resource(np, 0, &r); + of_node_put(np); + + if (ret < 0) { + printk(KERN_ERR "%s: Unable to get memory-controller reg\n", + __func__); + return -ENODEV; + } + + mem = ioremap(r.start, resource_size(&r)); + if (!mem) { + printk(KERN_ERR "%s: Unable to map memory-controller memory\n", + __func__); + return -ENOMEM; + } + + rev = __raw_readl(mem); + iounmap(mem); + + if (rev < 0x34 || rev > 0x3f) { /* U3H */ + printk(KERN_ERR "%s: Non-CPC925(U3H) bridge revision: %02x\n", + __func__, rev); + return 0; + } + + pdev = platform_device_register_simple("cpc925_edac", 0, &r, 1); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + printk(KERN_INFO "%s: CPC925 platform device created\n", __func__); + + return 0; +} +machine_device_initcall(maple, maple_cpc925_edac_setup); +#endif + +define_machine(maple) { + .name = "Maple", + .probe = maple_probe, + .setup_arch = maple_setup_arch, + .discover_phbs = maple_pci_init, + .init_IRQ = maple_init_IRQ, + .pci_irq_fixup = maple_pci_irq_fixup, + .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq, + .restart = maple_restart, + .halt = maple_halt, + .get_boot_time = maple_get_boot_time, + .set_rtc_time = maple_set_rtc_time, + .get_rtc_time = maple_get_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = maple_progress, + .power_save = power4_idle, +}; diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c new file mode 100644 index 000000000..91606411d --- /dev/null +++ b/arch/powerpc/platforms/maple/time.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), + * IBM Corp. + */ + +#undef DEBUG + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> +#include <linux/bcd.h> +#include <linux/of_address.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/time.h> + +#include "maple.h" + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static int maple_rtc_addr; + +static int maple_clock_read(int addr) +{ + outb_p(addr, maple_rtc_addr); + return inb_p(maple_rtc_addr+1); +} + +static void maple_clock_write(unsigned long val, int addr) +{ + outb_p(addr, maple_rtc_addr); + outb_p(val, maple_rtc_addr+1); +} + +void maple_get_rtc_time(struct rtc_time *tm) +{ + do { + tm->tm_sec = maple_clock_read(RTC_SECONDS); + tm->tm_min = maple_clock_read(RTC_MINUTES); + tm->tm_hour = maple_clock_read(RTC_HOURS); + tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH); + tm->tm_mon = maple_clock_read(RTC_MONTH); + tm->tm_year = maple_clock_read(RTC_YEAR); + } while (tm->tm_sec != maple_clock_read(RTC_SECONDS)); + + if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY) + || RTC_ALWAYS_BCD) { + tm->tm_sec = bcd2bin(tm->tm_sec); + tm->tm_min = bcd2bin(tm->tm_min); + tm->tm_hour = bcd2bin(tm->tm_hour); + tm->tm_mday = bcd2bin(tm->tm_mday); + tm->tm_mon = bcd2bin(tm->tm_mon); + tm->tm_year = bcd2bin(tm->tm_year); + } + if ((tm->tm_year + 1900) < 1970) + tm->tm_year += 100; + + tm->tm_wday = -1; +} + +int maple_set_rtc_time(struct rtc_time *tm) +{ + unsigned char save_control, save_freq_select; + int sec, min, hour, mon, mday, year; + + spin_lock(&rtc_lock); + + save_control = maple_clock_read(RTC_CONTROL); /* tell the clock it's being set */ + + maple_clock_write((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = maple_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ + + maple_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + sec = tm->tm_sec; + min = tm->tm_min; + hour = tm->tm_hour; + mon = tm->tm_mon; + mday = tm->tm_mday; + year = tm->tm_year; + + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + sec = bin2bcd(sec); + min = bin2bcd(min); + hour = bin2bcd(hour); + mon = bin2bcd(mon); + mday = bin2bcd(mday); + year = bin2bcd(year); + } + maple_clock_write(sec, RTC_SECONDS); + maple_clock_write(min, RTC_MINUTES); + maple_clock_write(hour, RTC_HOURS); + maple_clock_write(mon, RTC_MONTH); + maple_clock_write(mday, RTC_DAY_OF_MONTH); + maple_clock_write(year, RTC_YEAR); + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + maple_clock_write(save_control, RTC_CONTROL); + maple_clock_write(save_freq_select, RTC_FREQ_SELECT); + + spin_unlock(&rtc_lock); + + return 0; +} + +static struct resource rtc_iores = { + .name = "rtc", + .flags = IORESOURCE_IO | IORESOURCE_BUSY, +}; + +time64_t __init maple_get_boot_time(void) +{ + struct rtc_time tm; + struct device_node *rtcs; + + rtcs = of_find_compatible_node(NULL, "rtc", "pnpPNP,b00"); + if (rtcs) { + struct resource r; + if (of_address_to_resource(rtcs, 0, &r)) { + printk(KERN_EMERG "Maple: Unable to translate RTC" + " address\n"); + goto bail; + } + if (!(r.flags & IORESOURCE_IO)) { + printk(KERN_EMERG "Maple: RTC address isn't PIO!\n"); + goto bail; + } + maple_rtc_addr = r.start; + printk(KERN_INFO "Maple: Found RTC at IO 0x%x\n", + maple_rtc_addr); + } + bail: + of_node_put(rtcs); + if (maple_rtc_addr == 0) { + maple_rtc_addr = RTC_PORT(0); /* legacy address */ + printk(KERN_INFO "Maple: No device node for RTC, assuming " + "legacy address (0x%x)\n", maple_rtc_addr); + } + + rtc_iores.start = maple_rtc_addr; + rtc_iores.end = maple_rtc_addr + 7; + request_resource(&ioport_resource, &rtc_iores); + + maple_get_rtc_time(&tm); + return rtc_tm_to_time64(&tm); +} + |