diff options
Diffstat (limited to 'arch/x86/Kconfig.cpu')
| -rw-r--r-- | arch/x86/Kconfig.cpu | 519 |
1 files changed, 519 insertions, 0 deletions
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu new file mode 100644 index 000000000..542377cd4 --- /dev/null +++ b/arch/x86/Kconfig.cpu @@ -0,0 +1,519 @@ +# SPDX-License-Identifier: GPL-2.0 +# Put here option for CPU selection and depending optimization +choice + prompt "Processor family" + default M686 if X86_32 + default GENERIC_CPU if X86_64 + help + This is the processor type of your CPU. This information is + used for optimizing purposes. In order to compile a kernel + that can run on all supported x86 CPU types (albeit not + optimally fast), you can specify "486" here. + + Note that the 386 is no longer supported, this includes + AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI 486DLC/DLC2, + UMC 486SX-S and the NexGen Nx586. + + The kernel will not necessarily run on earlier architectures than + the one you have chosen, e.g. a Pentium optimized kernel will run on + a PPro, but not necessarily on a i486. + + Here are the settings recommended for greatest speed: + - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or + SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. + - "586" for generic Pentium CPUs lacking the TSC + (time stamp counter) register. + - "Pentium-Classic" for the Intel Pentium. + - "Pentium-MMX" for the Intel Pentium MMX. + - "Pentium-Pro" for the Intel Pentium Pro. + - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. + - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. + - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. + - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). + - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). + - "Opteron/Athlon64/Hammer/K8" for all K8 and newer AMD CPUs. + - "Crusoe" for the Transmeta Crusoe series. + - "Efficeon" for the Transmeta Efficeon series. + - "Winchip-C6" for original IDT Winchip. + - "Winchip-2" for IDT Winchips with 3dNow! capabilities. + - "AMD Elan" for the 32-bit AMD Elan embedded CPU. + - "GeodeGX1" for Geode GX1 (Cyrix MediaGX). + - "Geode GX/LX" For AMD Geode GX and LX processors. + - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. + - "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above). + - "VIA C7" for VIA C7. + - "Intel P4" for the Pentium 4/Netburst microarchitecture. + - "Core 2/newer Xeon" for all core2 and newer Intel CPUs. + - "Intel Atom" for the Atom-microarchitecture CPUs. + - "Generic-x86-64" for a kernel which runs on any x86-64 CPU. + + See each option's help text for additional details. If you don't know + what to do, choose "486". + +config M486SX + bool "486SX" + depends on X86_32 + help + Select this for an 486-class CPU without an FPU such as + AMD/Cyrix/IBM/Intel SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5S. + +config M486 + bool "486DX" + depends on X86_32 + help + Select this for an 486-class CPU such as AMD/Cyrix/IBM/Intel + 486DX/DX2/DX4 and UMC U5D. + +config M586 + bool "586/K5/5x86/6x86/6x86MX" + depends on X86_32 + help + Select this for an 586 or 686 series processor such as the AMD K5, + the Cyrix 5x86, 6x86 and 6x86MX. This choice does not + assume the RDTSC (Read Time Stamp Counter) instruction. + +config M586TSC + bool "Pentium-Classic" + depends on X86_32 + help + Select this for a Pentium Classic processor with the RDTSC (Read + Time Stamp Counter) instruction for benchmarking. + +config M586MMX + bool "Pentium-MMX" + depends on X86_32 + help + Select this for a Pentium with the MMX graphics/multimedia + extended instructions. + +config M686 + bool "Pentium-Pro" + depends on X86_32 + help + Select this for Intel Pentium Pro chips. This enables the use of + Pentium Pro extended instructions, and disables the init-time guard + against the f00f bug found in earlier Pentiums. + +config MPENTIUMII + bool "Pentium-II/Celeron(pre-Coppermine)" + depends on X86_32 + help + Select this for Intel chips based on the Pentium-II and + pre-Coppermine Celeron core. This option enables an unaligned + copy optimization, compiles the kernel with optimization flags + tailored for the chip, and applies any applicable Pentium Pro + optimizations. + +config MPENTIUMIII + bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" + depends on X86_32 + help + Select this for Intel chips based on the Pentium-III and + Celeron-Coppermine core. This option enables use of some + extended prefetch instructions in addition to the Pentium II + extensions. + +config MPENTIUMM + bool "Pentium M" + depends on X86_32 + help + Select this for Intel Pentium M (not Pentium-4 M) + notebook chips. + +config MPENTIUM4 + bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon" + depends on X86_32 + help + Select this for Intel Pentium 4 chips. This includes the + Pentium 4, Pentium D, P4-based Celeron and Xeon, and + Pentium-4 M (not Pentium M) chips. This option enables compile + flags optimized for the chip, uses the correct cache line size, and + applies any applicable optimizations. + + CPUIDs: F[0-6][1-A] (in /proc/cpuinfo show = cpu family : 15 ) + + Select this for: + Pentiums (Pentium 4, Pentium D, Celeron, Celeron D) corename: + -Willamette + -Northwood + -Mobile Pentium 4 + -Mobile Pentium 4 M + -Extreme Edition (Gallatin) + -Prescott + -Prescott 2M + -Cedar Mill + -Presler + -Smithfiled + Xeons (Intel Xeon, Xeon MP, Xeon LV, Xeon MV) corename: + -Foster + -Prestonia + -Gallatin + -Nocona + -Irwindale + -Cranford + -Potomac + -Paxville + -Dempsey + + +config MK6 + bool "K6/K6-II/K6-III" + depends on X86_32 + help + Select this for an AMD K6-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK7 + bool "Athlon/Duron/K7" + depends on X86_32 + help + Select this for an AMD Athlon K7-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK8 + bool "Opteron/Athlon64/Hammer/K8" + help + Select this for an AMD Opteron or Athlon64 Hammer-family processor. + Enables use of some extended instructions, and passes appropriate + optimization flags to GCC. + +config MCRUSOE + bool "Crusoe" + depends on X86_32 + help + Select this for a Transmeta Crusoe processor. Treats the processor + like a 586 with TSC, and sets some GCC optimization flags (like a + Pentium Pro with no alignment requirements). + +config MEFFICEON + bool "Efficeon" + depends on X86_32 + help + Select this for a Transmeta Efficeon processor. + +config MWINCHIPC6 + bool "Winchip-C6" + depends on X86_32 + help + Select this for an IDT Winchip C6 chip. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. + +config MWINCHIP3D + bool "Winchip-2/Winchip-2A/Winchip-3" + depends on X86_32 + help + Select this for an IDT Winchip-2, 2A or 3. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. Also enable out of order memory + stores for this CPU, which can increase performance of some + operations. + +config MELAN + bool "AMD Elan" + depends on X86_32 + help + Select this for an AMD Elan processor. + + Do not use this option for K6/Athlon/Opteron processors! + +config MGEODEGX1 + bool "GeodeGX1" + depends on X86_32 + help + Select this for a Geode GX1 (Cyrix MediaGX) chip. + +config MGEODE_LX + bool "Geode GX/LX" + depends on X86_32 + help + Select this for AMD Geode GX and LX processors. + +config MCYRIXIII + bool "CyrixIII/VIA-C3" + depends on X86_32 + help + Select this for a Cyrix III or C3 chip. Presently Linux and GCC + treat this chip as a generic 586. Whilst the CPU is 686 class, + it lacks the cmov extension which gcc assumes is present when + generating 686 code. + Note that Nehemiah (Model 9) and above will not boot with this + kernel due to them lacking the 3DNow! instructions used in earlier + incarnations of the CPU. + +config MVIAC3_2 + bool "VIA C3-2 (Nehemiah)" + depends on X86_32 + help + Select this for a VIA C3 "Nehemiah". Selecting this enables usage + of SSE and tells gcc to treat the CPU as a 686. + Note, this kernel will not boot on older (pre model 9) C3s. + +config MVIAC7 + bool "VIA C7" + depends on X86_32 + help + Select this for a VIA C7. Selecting this uses the correct cache + shift and tells gcc to treat the CPU as a 686. + +config MPSC + bool "Intel P4 / older Netburst based Xeon" + depends on X86_64 + help + Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey + Xeon CPUs with Intel 64bit which is compatible with x86-64. + Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the + Netburst core and shouldn't use this option. You can distinguish them + using the cpu family field + in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one. + +config MCORE2 + bool "Core 2/newer Xeon" + help + + Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and + 53xx) CPUs. You can distinguish newer from older Xeons by the CPU + family in /proc/cpuinfo. Newer ones have 6 and older ones 15 + (not a typo) + +config MATOM + bool "Intel Atom" + help + + Select this for the Intel Atom platform. Intel Atom CPUs have an + in-order pipelining architecture and thus can benefit from + accordingly optimized code. Use a recent GCC with specific Atom + support in order to fully benefit from selecting this option. + +config GENERIC_CPU + bool "Generic-x86-64" + depends on X86_64 + help + Generic x86-64 CPU. + Run equally well on all x86-64 CPUs. + +endchoice + +config X86_GENERIC + bool "Generic x86 support" + depends on X86_32 + help + Instead of just including optimizations for the selected + x86 variant (e.g. PII, Crusoe or Athlon), include some more + generic optimizations as well. This will make the kernel + perform better on x86 CPUs other than that selected. + + This is really intended for distributors who need more + generic optimizations. + +# +# Define implied options from the CPU selection here +config X86_INTERNODE_CACHE_SHIFT + int + default "12" if X86_VSMP + default X86_L1_CACHE_SHIFT + +config X86_L1_CACHE_SHIFT + int + default "7" if MPENTIUM4 || MPSC + default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU + default "4" if MELAN || M486SX || M486 || MGEODEGX1 + default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX + +config X86_F00F_BUG + def_bool y + depends on M586MMX || M586TSC || M586 || M486SX || M486 + +config X86_INVD_BUG + def_bool y + depends on M486SX || M486 + +config X86_ALIGNMENT_16 + def_bool y + depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MELAN || MK6 || M586MMX || M586TSC || M586 || M486SX || M486 || MVIAC3_2 || MGEODEGX1 + +config X86_INTEL_USERCOPY + def_bool y + depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2 + +config X86_USE_PPRO_CHECKSUM + def_bool y + depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MVIAC7 || MEFFICEON || MGEODE_LX || MCORE2 || MATOM + +# +# P6_NOPs are a relatively minor optimization that require a family >= +# 6 processor, except that it is broken on certain VIA chips. +# Furthermore, AMD chips prefer a totally different sequence of NOPs +# (which work on all CPUs). In addition, it looks like Virtual PC +# does not understand them. +# +# As a result, disallow these if we're not compiling for X86_64 (these +# NOPs do work on all x86-64 capable chips); the list of processors in +# the right-hand clause are the cores that benefit from this optimization. +# +config X86_P6_NOP + def_bool y + depends on X86_64 + depends on (MCORE2 || MPENTIUM4 || MPSC) + +config X86_TSC + def_bool y + depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64 + +config X86_CMPXCHG64 + def_bool y + depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586TSC || M586MMX || MATOM || MGEODE_LX || MGEODEGX1 || MK6 || MK7 || MK8 + +# this should be set for all -march=.. options where the compiler +# generates cmov. +config X86_CMOV + def_bool y + depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX) + +config X86_MINIMUM_CPU_FAMILY + int + default "64" if X86_64 + default "6" if X86_32 && (MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MEFFICEON || MATOM || MCRUSOE || MCORE2 || MK7 || MK8) + default "5" if X86_32 && X86_CMPXCHG64 + default "4" + +config X86_DEBUGCTLMSR + def_bool y + depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486SX || M486) && !UML + +config IA32_FEAT_CTL + def_bool y + depends on CPU_SUP_INTEL || CPU_SUP_CENTAUR || CPU_SUP_ZHAOXIN + +config X86_VMX_FEATURE_NAMES + def_bool y + depends on IA32_FEAT_CTL && X86_FEATURE_NAMES + +menuconfig PROCESSOR_SELECT + bool "Supported processor vendors" if EXPERT + help + This lets you choose what x86 vendor support code your kernel + will include. + +config CPU_SUP_INTEL + default y + bool "Support Intel processors" if PROCESSOR_SELECT + help + This enables detection, tunings and quirks for Intel processors + + You need this enabled if you want your kernel to run on an + Intel CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on an Intel + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_CYRIX_32 + default y + bool "Support Cyrix processors" if PROCESSOR_SELECT + depends on M486SX || M486 || M586 || M586TSC || M586MMX || (EXPERT && !64BIT) + help + This enables detection, tunings and quirks for Cyrix processors + + You need this enabled if you want your kernel to run on a + Cyrix CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Cyrix + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_AMD + default y + bool "Support AMD processors" if PROCESSOR_SELECT + help + This enables detection, tunings and quirks for AMD processors + + You need this enabled if you want your kernel to run on an + AMD CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on an AMD + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_HYGON + default y + bool "Support Hygon processors" if PROCESSOR_SELECT + select CPU_SUP_AMD + help + This enables detection, tunings and quirks for Hygon processors + + You need this enabled if you want your kernel to run on an + Hygon CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on an Hygon + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_CENTAUR + default y + bool "Support Centaur processors" if PROCESSOR_SELECT + help + This enables detection, tunings and quirks for Centaur processors + + You need this enabled if you want your kernel to run on a + Centaur CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Centaur + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_TRANSMETA_32 + default y + bool "Support Transmeta processors" if PROCESSOR_SELECT + depends on !64BIT + help + This enables detection, tunings and quirks for Transmeta processors + + You need this enabled if you want your kernel to run on a + Transmeta CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Transmeta + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_UMC_32 + default y + bool "Support UMC processors" if PROCESSOR_SELECT + depends on M486SX || M486 || (EXPERT && !64BIT) + help + This enables detection, tunings and quirks for UMC processors + + You need this enabled if you want your kernel to run on a + UMC CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a UMC + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_ZHAOXIN + default y + bool "Support Zhaoxin processors" if PROCESSOR_SELECT + help + This enables detection, tunings and quirks for Zhaoxin processors + + You need this enabled if you want your kernel to run on a + Zhaoxin CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Zhaoxin + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_VORTEX_32 + default y + bool "Support Vortex processors" if PROCESSOR_SELECT + depends on X86_32 + help + This enables detection, tunings and quirks for Vortex processors + + You need this enabled if you want your kernel to run on a + Vortex CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. + + If unsure, say N. |