summaryrefslogtreecommitdiffstats
path: root/drivers/ata/sata_highbank.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/sata_highbank.c')
-rw-r--r--drivers/ata/sata_highbank.c631
1 files changed, 631 insertions, 0 deletions
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
new file mode 100644
index 000000000..dfbf9493e
--- /dev/null
+++ b/drivers/ata/sata_highbank.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Calxeda Highbank AHCI SATA platform driver
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ */
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+
+#include "ahci.h"
+
+#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
+#define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2)
+#define SERDES_CR_CTL 0x80a0
+#define SERDES_CR_ADDR 0x80a1
+#define SERDES_CR_DATA 0x80a2
+#define CR_BUSY 0x0001
+#define CR_START 0x0001
+#define CR_WR_RDN 0x0002
+#define CPHY_TX_INPUT_STS 0x2001
+#define CPHY_RX_INPUT_STS 0x2002
+#define CPHY_SATA_TX_OVERRIDE 0x8000
+#define CPHY_SATA_RX_OVERRIDE 0x4000
+#define CPHY_TX_OVERRIDE 0x2004
+#define CPHY_RX_OVERRIDE 0x2005
+#define SPHY_LANE 0x100
+#define SPHY_HALF_RATE 0x0001
+#define CPHY_SATA_DPLL_MODE 0x0700
+#define CPHY_SATA_DPLL_SHIFT 8
+#define CPHY_SATA_DPLL_RESET (1 << 11)
+#define CPHY_SATA_TX_ATTEN 0x1c00
+#define CPHY_SATA_TX_ATTEN_SHIFT 10
+#define CPHY_PHY_COUNT 6
+#define CPHY_LANE_COUNT 4
+#define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT)
+
+static DEFINE_SPINLOCK(cphy_lock);
+/* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based
+ * sata ports to their phys and then to their lanes within the phys
+ */
+struct phy_lane_info {
+ void __iomem *phy_base;
+ u8 lane_mapping;
+ u8 phy_devs;
+ u8 tx_atten;
+};
+static struct phy_lane_info port_data[CPHY_PORT_COUNT];
+
+static DEFINE_SPINLOCK(sgpio_lock);
+#define SCLOCK 0
+#define SLOAD 1
+#define SDATA 2
+#define SGPIO_PINS 3
+#define SGPIO_PORTS 8
+
+struct ecx_plat_data {
+ u32 n_ports;
+ /* number of extra clocks that the SGPIO PIC controller expects */
+ u32 pre_clocks;
+ u32 post_clocks;
+ struct gpio_desc *sgpio_gpiod[SGPIO_PINS];
+ u32 sgpio_pattern;
+ u32 port_to_sgpio[SGPIO_PORTS];
+};
+
+#define SGPIO_SIGNALS 3
+#define ECX_ACTIVITY_BITS 0x300000
+#define ECX_ACTIVITY_SHIFT 0
+#define ECX_LOCATE_BITS 0x80000
+#define ECX_LOCATE_SHIFT 1
+#define ECX_FAULT_BITS 0x400000
+#define ECX_FAULT_SHIFT 2
+static inline int sgpio_bit_shift(struct ecx_plat_data *pdata, u32 port,
+ u32 shift)
+{
+ return 1 << (3 * pdata->port_to_sgpio[port] + shift);
+}
+
+static void ecx_parse_sgpio(struct ecx_plat_data *pdata, u32 port, u32 state)
+{
+ if (state & ECX_ACTIVITY_BITS)
+ pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port,
+ ECX_ACTIVITY_SHIFT);
+ else
+ pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port,
+ ECX_ACTIVITY_SHIFT);
+ if (state & ECX_LOCATE_BITS)
+ pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port,
+ ECX_LOCATE_SHIFT);
+ else
+ pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port,
+ ECX_LOCATE_SHIFT);
+ if (state & ECX_FAULT_BITS)
+ pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port,
+ ECX_FAULT_SHIFT);
+ else
+ pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port,
+ ECX_FAULT_SHIFT);
+}
+
+/*
+ * Tell the LED controller that the signal has changed by raising the clock
+ * line for 50 uS and then lowering it for 50 uS.
+ */
+static void ecx_led_cycle_clock(struct ecx_plat_data *pdata)
+{
+ gpiod_set_value(pdata->sgpio_gpiod[SCLOCK], 1);
+ udelay(50);
+ gpiod_set_value(pdata->sgpio_gpiod[SCLOCK], 0);
+ udelay(50);
+}
+
+static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ecx_plat_data *pdata = hpriv->plat_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ unsigned long flags;
+ int pmp, i;
+ struct ahci_em_priv *emp;
+ u32 sgpio_out;
+
+ /* get the slot number from the message */
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+ if (pmp < EM_MAX_SLOTS)
+ emp = &pp->em_priv[pmp];
+ else
+ return -EINVAL;
+
+ if (!(hpriv->em_msg_type & EM_MSG_TYPE_LED))
+ return size;
+
+ spin_lock_irqsave(&sgpio_lock, flags);
+ ecx_parse_sgpio(pdata, ap->port_no, state);
+ sgpio_out = pdata->sgpio_pattern;
+ for (i = 0; i < pdata->pre_clocks; i++)
+ ecx_led_cycle_clock(pdata);
+
+ gpiod_set_value(pdata->sgpio_gpiod[SLOAD], 1);
+ ecx_led_cycle_clock(pdata);
+ gpiod_set_value(pdata->sgpio_gpiod[SLOAD], 0);
+ /*
+ * bit-bang out the SGPIO pattern, by consuming a bit and then
+ * clocking it out.
+ */
+ for (i = 0; i < (SGPIO_SIGNALS * pdata->n_ports); i++) {
+ gpiod_set_value(pdata->sgpio_gpiod[SDATA], sgpio_out & 1);
+ sgpio_out >>= 1;
+ ecx_led_cycle_clock(pdata);
+ }
+ for (i = 0; i < pdata->post_clocks; i++)
+ ecx_led_cycle_clock(pdata);
+
+ /* save off new led state for port/slot */
+ emp->led_state = state;
+
+ spin_unlock_irqrestore(&sgpio_lock, flags);
+ return size;
+}
+
+static void highbank_set_em_messages(struct device *dev,
+ struct ahci_host_priv *hpriv,
+ struct ata_port_info *pi)
+{
+ struct device_node *np = dev->of_node;
+ struct ecx_plat_data *pdata = hpriv->plat_data;
+ int i;
+
+ for (i = 0; i < SGPIO_PINS; i++) {
+ struct gpio_desc *gpiod;
+
+ gpiod = devm_gpiod_get_index(dev, "calxeda,sgpio", i,
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod)) {
+ dev_err(dev, "failed to get GPIO %d\n", i);
+ continue;
+ }
+ gpiod_set_consumer_name(gpiod, "CX SGPIO");
+
+ pdata->sgpio_gpiod[i] = gpiod;
+ }
+ of_property_read_u32_array(np, "calxeda,led-order",
+ pdata->port_to_sgpio,
+ pdata->n_ports);
+ if (of_property_read_u32(np, "calxeda,pre-clocks", &pdata->pre_clocks))
+ pdata->pre_clocks = 0;
+ if (of_property_read_u32(np, "calxeda,post-clocks",
+ &pdata->post_clocks))
+ pdata->post_clocks = 0;
+
+ /* store em_loc */
+ hpriv->em_loc = 0;
+ hpriv->em_buf_sz = 4;
+ hpriv->em_msg_type = EM_MSG_TYPE_LED;
+ pi->flags |= ATA_FLAG_EM | ATA_FLAG_SW_ACTIVITY;
+}
+
+static u32 __combo_phy_reg_read(u8 sata_port, u32 addr)
+{
+ u32 data;
+ u8 dev = port_data[sata_port].phy_devs;
+ spin_lock(&cphy_lock);
+ writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
+ data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr));
+ spin_unlock(&cphy_lock);
+ return data;
+}
+
+static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data)
+{
+ u8 dev = port_data[sata_port].phy_devs;
+ spin_lock(&cphy_lock);
+ writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
+ writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr));
+ spin_unlock(&cphy_lock);
+}
+
+static void combo_phy_wait_for_ready(u8 sata_port)
+{
+ while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY)
+ udelay(5);
+}
+
+static u32 combo_phy_read(u8 sata_port, u32 addr)
+{
+ combo_phy_wait_for_ready(sata_port);
+ __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
+ __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START);
+ combo_phy_wait_for_ready(sata_port);
+ return __combo_phy_reg_read(sata_port, SERDES_CR_DATA);
+}
+
+static void combo_phy_write(u8 sata_port, u32 addr, u32 data)
+{
+ combo_phy_wait_for_ready(sata_port);
+ __combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
+ __combo_phy_reg_write(sata_port, SERDES_CR_DATA, data);
+ __combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START);
+}
+
+static void highbank_cphy_disable_overrides(u8 sata_port)
+{
+ u8 lane = port_data[sata_port].lane_mapping;
+ u32 tmp;
+ if (unlikely(port_data[sata_port].phy_base == NULL))
+ return;
+ tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
+ tmp &= ~CPHY_SATA_RX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
+}
+
+static void cphy_override_tx_attenuation(u8 sata_port, u32 val)
+{
+ u8 lane = port_data[sata_port].lane_mapping;
+ u32 tmp;
+
+ if (val & 0x8)
+ return;
+
+ tmp = combo_phy_read(sata_port, CPHY_TX_INPUT_STS + lane * SPHY_LANE);
+ tmp &= ~CPHY_SATA_TX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp |= CPHY_SATA_TX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN;
+ combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp);
+}
+
+static void cphy_override_rx_mode(u8 sata_port, u32 val)
+{
+ u8 lane = port_data[sata_port].lane_mapping;
+ u32 tmp;
+ tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
+ tmp &= ~CPHY_SATA_RX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp |= CPHY_SATA_RX_OVERRIDE;
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp &= ~CPHY_SATA_DPLL_MODE;
+ tmp |= val << CPHY_SATA_DPLL_SHIFT;
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp |= CPHY_SATA_DPLL_RESET;
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ tmp &= ~CPHY_SATA_DPLL_RESET;
+ combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
+
+ msleep(15);
+}
+
+static void highbank_cphy_override_lane(u8 sata_port)
+{
+ u8 lane = port_data[sata_port].lane_mapping;
+ u32 tmp, k = 0;
+
+ if (unlikely(port_data[sata_port].phy_base == NULL))
+ return;
+ do {
+ tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS +
+ lane * SPHY_LANE);
+ } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
+ cphy_override_rx_mode(sata_port, 3);
+ cphy_override_tx_attenuation(sata_port, port_data[sata_port].tx_atten);
+}
+
+static int highbank_initialize_phys(struct device *dev, void __iomem *addr)
+{
+ struct device_node *sata_node = dev->of_node;
+ int phy_count = 0, phy, port = 0, i;
+ void __iomem *cphy_base[CPHY_PHY_COUNT] = {};
+ struct device_node *phy_nodes[CPHY_PHY_COUNT] = {};
+ u32 tx_atten[CPHY_PORT_COUNT] = {};
+
+ memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT);
+
+ do {
+ u32 tmp;
+ struct of_phandle_args phy_data;
+ if (of_parse_phandle_with_args(sata_node,
+ "calxeda,port-phys", "#phy-cells",
+ port, &phy_data))
+ break;
+ for (phy = 0; phy < phy_count; phy++) {
+ if (phy_nodes[phy] == phy_data.np)
+ break;
+ }
+ if (phy_nodes[phy] == NULL) {
+ phy_nodes[phy] = phy_data.np;
+ cphy_base[phy] = of_iomap(phy_nodes[phy], 0);
+ if (cphy_base[phy] == NULL) {
+ return 0;
+ }
+ phy_count += 1;
+ }
+ port_data[port].lane_mapping = phy_data.args[0];
+ of_property_read_u32(phy_nodes[phy], "phydev", &tmp);
+ port_data[port].phy_devs = tmp;
+ port_data[port].phy_base = cphy_base[phy];
+ of_node_put(phy_data.np);
+ port += 1;
+ } while (port < CPHY_PORT_COUNT);
+ of_property_read_u32_array(sata_node, "calxeda,tx-atten",
+ tx_atten, port);
+ for (i = 0; i < port; i++)
+ port_data[i].tx_atten = (u8) tx_atten[i];
+ return 0;
+}
+
+/*
+ * The Calxeda SATA phy intermittently fails to bring up a link with Gen3
+ * Retrying the phy hard reset can work around the issue, but the drive
+ * may fail again. In less than 150 out of 15000 test runs, it took more
+ * than 10 tries for the link to be established (but never more than 35).
+ * Triple the maximum observed retry count to provide plenty of margin for
+ * rare events and to guarantee that the link is established.
+ *
+ * Also, the default 2 second time-out on a failed drive is too long in
+ * this situation. The uboot implementation of the same driver function
+ * uses a much shorter time-out period and never experiences a time out
+ * issue. Reducing the time-out to 500ms improves the responsiveness.
+ * The other timing constants were kept the same as the stock AHCI driver.
+ * This change was also tested 15000 times on 24 drives and none of them
+ * experienced a time out.
+ */
+static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ static const unsigned long timing[] = { 5, 100, 500};
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ struct ata_taskfile tf;
+ bool online;
+ u32 sstatus;
+ int rc;
+ int retry = 100;
+
+ hpriv->stop_engine(ap);
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.status = ATA_BUSY;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+ do {
+ highbank_cphy_disable_overrides(link->ap->port_no);
+ rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
+ highbank_cphy_override_lane(link->ap->port_no);
+
+ /* If the status is 1, we are connected, but the link did not
+ * come up. So retry resetting the link again.
+ */
+ if (sata_scr_read(link, SCR_STATUS, &sstatus))
+ break;
+ if (!(sstatus & 0x3))
+ break;
+ } while (!online && retry--);
+
+ hpriv->start_engine(ap);
+
+ if (online)
+ *class = ahci_dev_classify(ap);
+
+ return rc;
+}
+
+static struct ata_port_operations ahci_highbank_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_highbank_hardreset,
+ .transmit_led_message = ecx_transmit_led_message,
+};
+
+static const struct ata_port_info ahci_highbank_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_highbank_ops,
+};
+
+static struct scsi_host_template ahci_highbank_platform_sht = {
+ AHCI_SHT("sata_highbank"),
+};
+
+static const struct of_device_id ahci_of_match[] = {
+ { .compatible = "calxeda,hb-ahci" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static int ahci_highbank_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct ecx_plat_data *pdata;
+ struct ata_host *host;
+ struct resource *mem;
+ int irq;
+ int i;
+ int rc;
+ u32 n_ports;
+ struct ata_port_info pi = ahci_highbank_port_info;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(dev, "no mmio space\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+ if (!irq)
+ return -EINVAL;
+
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv) {
+ dev_err(dev, "can't alloc ahci_host_priv\n");
+ return -ENOMEM;
+ }
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "can't alloc ecx_plat_data\n");
+ return -ENOMEM;
+ }
+
+ hpriv->irq = irq;
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+ if (!hpriv->mmio) {
+ dev_err(dev, "can't map %pR\n", mem);
+ return -ENOMEM;
+ }
+
+ rc = highbank_initialize_phys(dev, hpriv->mmio);
+ if (rc)
+ return rc;
+
+
+ ahci_save_initial_config(dev, hpriv);
+
+ /* prepare host */
+ if (hpriv->cap & HOST_CAP_NCQ)
+ pi.flags |= ATA_FLAG_NCQ;
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ if (hpriv->cap & HOST_CAP_64)
+ dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ pdata->n_ports = n_ports;
+ hpriv->plat_data = pdata;
+ highbank_set_em_messages(dev, hpriv, &pi);
+
+ host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+ if (!host) {
+ rc = -ENOMEM;
+ goto err0;
+ }
+
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ata_port_desc(ap, "mmio %pR", mem);
+ ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = hpriv->em_msg_type;
+
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+ rc = ahci_reset_controller(host);
+ if (rc)
+ goto err0;
+
+ ahci_init_controller(host);
+ ahci_print_info(host, "platform");
+
+ rc = ahci_host_activate(host, &ahci_highbank_platform_sht);
+ if (rc)
+ goto err0;
+
+ return 0;
+err0:
+ return rc;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ahci_highbank_suspend(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+
+ if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_err(dev, "firmware update required for suspend/resume\n");
+ return -EIO;
+ }
+
+ /*
+ * AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+
+ ata_host_suspend(host, PMSG_SUSPEND);
+ return 0;
+}
+
+static int ahci_highbank_resume(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ int rc;
+
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops,
+ ahci_highbank_suspend, ahci_highbank_resume);
+
+static struct platform_driver ahci_highbank_driver = {
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = "highbank-ahci",
+ .of_match_table = ahci_of_match,
+ .pm = &ahci_highbank_pm_ops,
+ },
+ .probe = ahci_highbank_probe,
+};
+
+module_platform_driver(ahci_highbank_driver);
+
+MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver");
+MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("sata:highbank");