diff options
Diffstat (limited to 'drivers/bluetooth/btintel.c')
| -rw-r--r-- | drivers/bluetooth/btintel.c | 2662 |
1 files changed, 2662 insertions, 0 deletions
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c new file mode 100644 index 000000000..bbad1207c --- /dev/null +++ b/drivers/bluetooth/btintel.c @@ -0,0 +1,2662 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Bluetooth support for Intel devices + * + * Copyright (C) 2015 Intel Corporation + */ + +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/regmap.h> +#include <asm/unaligned.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "btintel.h" + +#define VERSION "0.1" + +#define BDADDR_INTEL (&(bdaddr_t){{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}}) +#define RSA_HEADER_LEN 644 +#define CSS_HEADER_OFFSET 8 +#define ECDSA_OFFSET 644 +#define ECDSA_HEADER_LEN 320 + +#define CMD_WRITE_BOOT_PARAMS 0xfc0e +struct cmd_write_boot_params { + u32 boot_addr; + u8 fw_build_num; + u8 fw_build_ww; + u8 fw_build_yy; +} __packed; + +int btintel_check_bdaddr(struct hci_dev *hdev) +{ + struct hci_rp_read_bd_addr *bda; + struct sk_buff *skb; + + skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + int err = PTR_ERR(skb); + bt_dev_err(hdev, "Reading Intel device address failed (%d)", + err); + return err; + } + + if (skb->len != sizeof(*bda)) { + bt_dev_err(hdev, "Intel device address length mismatch"); + kfree_skb(skb); + return -EIO; + } + + bda = (struct hci_rp_read_bd_addr *)skb->data; + + /* For some Intel based controllers, the default Bluetooth device + * address 00:03:19:9E:8B:00 can be found. These controllers are + * fully operational, but have the danger of duplicate addresses + * and that in turn can cause problems with Bluetooth operation. + */ + if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) { + bt_dev_err(hdev, "Found Intel default device address (%pMR)", + &bda->bdaddr); + set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); + } + + kfree_skb(skb); + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_check_bdaddr); + +int btintel_enter_mfg(struct hci_dev *hdev) +{ + static const u8 param[] = { 0x01, 0x00 }; + struct sk_buff *skb; + + skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Entering manufacturer mode failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_enter_mfg); + +int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched) +{ + u8 param[] = { 0x00, 0x00 }; + struct sk_buff *skb; + + /* The 2nd command parameter specifies the manufacturing exit method: + * 0x00: Just disable the manufacturing mode (0x00). + * 0x01: Disable manufacturing mode and reset with patches deactivated. + * 0x02: Disable manufacturing mode and reset with patches activated. + */ + if (reset) + param[1] |= patched ? 0x02 : 0x01; + + skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Exiting manufacturer mode failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_exit_mfg); + +int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) +{ + struct sk_buff *skb; + int err; + + skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + bt_dev_err(hdev, "Changing Intel device address failed (%d)", + err); + return err; + } + kfree_skb(skb); + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_set_bdaddr); + +static int btintel_set_event_mask(struct hci_dev *hdev, bool debug) +{ + u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + struct sk_buff *skb; + int err; + + if (debug) + mask[1] |= 0x62; + + skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err); + return err; + } + kfree_skb(skb); + + return 0; +} + +int btintel_set_diag(struct hci_dev *hdev, bool enable) +{ + struct sk_buff *skb; + u8 param[3]; + int err; + + if (enable) { + param[0] = 0x03; + param[1] = 0x03; + param[2] = 0x03; + } else { + param[0] = 0x00; + param[1] = 0x00; + param[2] = 0x00; + } + + skb = __hci_cmd_sync(hdev, 0xfc43, 3, param, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + if (err == -ENODATA) + goto done; + bt_dev_err(hdev, "Changing Intel diagnostic mode failed (%d)", + err); + return err; + } + kfree_skb(skb); + +done: + btintel_set_event_mask(hdev, enable); + return 0; +} +EXPORT_SYMBOL_GPL(btintel_set_diag); + +static int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable) +{ + int err, ret; + + err = btintel_enter_mfg(hdev); + if (err) + return err; + + ret = btintel_set_diag(hdev, enable); + + err = btintel_exit_mfg(hdev, false, false); + if (err) + return err; + + return ret; +} + +static int btintel_set_diag_combined(struct hci_dev *hdev, bool enable) +{ + int ret; + + /* Legacy ROM device needs to be in the manufacturer mode to apply + * diagnostic setting + * + * This flag is set after reading the Intel version. + */ + if (btintel_test_flag(hdev, INTEL_ROM_LEGACY)) + ret = btintel_set_diag_mfg(hdev, enable); + else + ret = btintel_set_diag(hdev, enable); + + return ret; +} + +static void btintel_hw_error(struct hci_dev *hdev, u8 code) +{ + struct sk_buff *skb; + u8 type = 0x00; + + bt_dev_err(hdev, "Hardware error 0x%2.2x", code); + + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reset after hardware error failed (%ld)", + PTR_ERR(skb)); + return; + } + kfree_skb(skb); + + skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Retrieving Intel exception info failed (%ld)", + PTR_ERR(skb)); + return; + } + + if (skb->len != 13) { + bt_dev_err(hdev, "Exception info size mismatch"); + kfree_skb(skb); + return; + } + + bt_dev_err(hdev, "Exception info %s", (char *)(skb->data + 1)); + + kfree_skb(skb); +} + +int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver) +{ + const char *variant; + + /* The hardware platform number has a fixed value of 0x37 and + * for now only accept this single value. + */ + if (ver->hw_platform != 0x37) { + bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)", + ver->hw_platform); + return -EINVAL; + } + + /* Check for supported iBT hardware variants of this firmware + * loading method. + * + * This check has been put in place to ensure correct forward + * compatibility options when newer hardware variants come along. + */ + switch (ver->hw_variant) { + case 0x07: /* WP - Legacy ROM */ + case 0x08: /* StP - Legacy ROM */ + case 0x0b: /* SfP */ + case 0x0c: /* WsP */ + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + break; + default: + bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)", + ver->hw_variant); + return -EINVAL; + } + + switch (ver->fw_variant) { + case 0x01: + variant = "Legacy ROM 2.5"; + break; + case 0x06: + variant = "Bootloader"; + break; + case 0x22: + variant = "Legacy ROM 2.x"; + break; + case 0x23: + variant = "Firmware"; + break; + default: + bt_dev_err(hdev, "Unsupported firmware variant(%02x)", ver->fw_variant); + return -EINVAL; + } + + bt_dev_info(hdev, "%s revision %u.%u build %u week %u %u", + variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f, + ver->fw_build_num, ver->fw_build_ww, + 2000 + ver->fw_build_yy); + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_version_info); + +static int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen, + const void *param) +{ + while (plen > 0) { + struct sk_buff *skb; + u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen; + + cmd_param[0] = fragment_type; + memcpy(cmd_param + 1, param, fragment_len); + + skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1, + cmd_param, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + kfree_skb(skb); + + plen -= fragment_len; + param += fragment_len; + } + + return 0; +} + +int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name) +{ + const struct firmware *fw; + struct sk_buff *skb; + const u8 *fw_ptr; + int err; + + err = request_firmware_direct(&fw, ddc_name, &hdev->dev); + if (err < 0) { + bt_dev_err(hdev, "Failed to load Intel DDC file %s (%d)", + ddc_name, err); + return err; + } + + bt_dev_info(hdev, "Found Intel DDC parameters: %s", ddc_name); + + fw_ptr = fw->data; + + /* DDC file contains one or more DDC structure which has + * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2). + */ + while (fw->size > fw_ptr - fw->data) { + u8 cmd_plen = fw_ptr[0] + sizeof(u8); + + skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Failed to send Intel_Write_DDC (%ld)", + PTR_ERR(skb)); + release_firmware(fw); + return PTR_ERR(skb); + } + + fw_ptr += cmd_plen; + kfree_skb(skb); + } + + release_firmware(fw); + + bt_dev_info(hdev, "Applying Intel DDC parameters completed"); + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_load_ddc_config); + +int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug) +{ + int err, ret; + + err = btintel_enter_mfg(hdev); + if (err) + return err; + + ret = btintel_set_event_mask(hdev, debug); + + err = btintel_exit_mfg(hdev, false, false); + if (err) + return err; + + return ret; +} +EXPORT_SYMBOL_GPL(btintel_set_event_mask_mfg); + +int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver) +{ + struct sk_buff *skb; + + skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading Intel version information failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*ver)) { + bt_dev_err(hdev, "Intel version event size mismatch"); + kfree_skb(skb); + return -EILSEQ; + } + + memcpy(ver, skb->data, sizeof(*ver)); + + kfree_skb(skb); + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_read_version); + +static int btintel_version_info_tlv(struct hci_dev *hdev, + struct intel_version_tlv *version) +{ + const char *variant; + + /* The hardware platform number has a fixed value of 0x37 and + * for now only accept this single value. + */ + if (INTEL_HW_PLATFORM(version->cnvi_bt) != 0x37) { + bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)", + INTEL_HW_PLATFORM(version->cnvi_bt)); + return -EINVAL; + } + + /* Check for supported iBT hardware variants of this firmware + * loading method. + * + * This check has been put in place to ensure correct forward + * compatibility options when newer hardware variants come along. + */ + switch (INTEL_HW_VARIANT(version->cnvi_bt)) { + case 0x17: /* TyP */ + case 0x18: /* Slr */ + case 0x19: /* Slr-F */ + case 0x1b: /* Mgr */ + break; + default: + bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)", + INTEL_HW_VARIANT(version->cnvi_bt)); + return -EINVAL; + } + + switch (version->img_type) { + case 0x01: + variant = "Bootloader"; + /* It is required that every single firmware fragment is acknowledged + * with a command complete event. If the boot parameters indicate + * that this bootloader does not send them, then abort the setup. + */ + if (version->limited_cce != 0x00) { + bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)", + version->limited_cce); + return -EINVAL; + } + + /* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */ + if (version->sbe_type > 0x01) { + bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)", + version->sbe_type); + return -EINVAL; + } + + bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id); + bt_dev_info(hdev, "Secure boot is %s", + version->secure_boot ? "enabled" : "disabled"); + bt_dev_info(hdev, "OTP lock is %s", + version->otp_lock ? "enabled" : "disabled"); + bt_dev_info(hdev, "API lock is %s", + version->api_lock ? "enabled" : "disabled"); + bt_dev_info(hdev, "Debug lock is %s", + version->debug_lock ? "enabled" : "disabled"); + bt_dev_info(hdev, "Minimum firmware build %u week %u %u", + version->min_fw_build_nn, version->min_fw_build_cw, + 2000 + version->min_fw_build_yy); + break; + case 0x03: + variant = "Firmware"; + break; + default: + bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type); + return -EINVAL; + } + + bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant, + 2000 + (version->timestamp >> 8), version->timestamp & 0xff, + version->build_type, version->build_num); + + return 0; +} + +static int btintel_parse_version_tlv(struct hci_dev *hdev, + struct intel_version_tlv *version, + struct sk_buff *skb) +{ + /* Consume Command Complete Status field */ + skb_pull(skb, 1); + + /* Event parameters contatin multiple TLVs. Read each of them + * and only keep the required data. Also, it use existing legacy + * version field like hw_platform, hw_variant, and fw_variant + * to keep the existing setup flow + */ + while (skb->len) { + struct intel_tlv *tlv; + + /* Make sure skb has a minimum length of the header */ + if (skb->len < sizeof(*tlv)) + return -EINVAL; + + tlv = (struct intel_tlv *)skb->data; + + /* Make sure skb has a enough data */ + if (skb->len < tlv->len + sizeof(*tlv)) + return -EINVAL; + + switch (tlv->type) { + case INTEL_TLV_CNVI_TOP: + version->cnvi_top = get_unaligned_le32(tlv->val); + break; + case INTEL_TLV_CNVR_TOP: + version->cnvr_top = get_unaligned_le32(tlv->val); + break; + case INTEL_TLV_CNVI_BT: + version->cnvi_bt = get_unaligned_le32(tlv->val); + break; + case INTEL_TLV_CNVR_BT: + version->cnvr_bt = get_unaligned_le32(tlv->val); + break; + case INTEL_TLV_DEV_REV_ID: + version->dev_rev_id = get_unaligned_le16(tlv->val); + break; + case INTEL_TLV_IMAGE_TYPE: + version->img_type = tlv->val[0]; + break; + case INTEL_TLV_TIME_STAMP: + /* If image type is Operational firmware (0x03), then + * running FW Calendar Week and Year information can + * be extracted from Timestamp information + */ + version->min_fw_build_cw = tlv->val[0]; + version->min_fw_build_yy = tlv->val[1]; + version->timestamp = get_unaligned_le16(tlv->val); + break; + case INTEL_TLV_BUILD_TYPE: + version->build_type = tlv->val[0]; + break; + case INTEL_TLV_BUILD_NUM: + /* If image type is Operational firmware (0x03), then + * running FW build number can be extracted from the + * Build information + */ + version->min_fw_build_nn = tlv->val[0]; + version->build_num = get_unaligned_le32(tlv->val); + break; + case INTEL_TLV_SECURE_BOOT: + version->secure_boot = tlv->val[0]; + break; + case INTEL_TLV_OTP_LOCK: + version->otp_lock = tlv->val[0]; + break; + case INTEL_TLV_API_LOCK: + version->api_lock = tlv->val[0]; + break; + case INTEL_TLV_DEBUG_LOCK: + version->debug_lock = tlv->val[0]; + break; + case INTEL_TLV_MIN_FW: + version->min_fw_build_nn = tlv->val[0]; + version->min_fw_build_cw = tlv->val[1]; + version->min_fw_build_yy = tlv->val[2]; + break; + case INTEL_TLV_LIMITED_CCE: + version->limited_cce = tlv->val[0]; + break; + case INTEL_TLV_SBE_TYPE: + version->sbe_type = tlv->val[0]; + break; + case INTEL_TLV_OTP_BDADDR: + memcpy(&version->otp_bd_addr, tlv->val, + sizeof(bdaddr_t)); + break; + default: + /* Ignore rest of information */ + break; + } + /* consume the current tlv and move to next*/ + skb_pull(skb, tlv->len + sizeof(*tlv)); + } + + return 0; +} + +static int btintel_read_version_tlv(struct hci_dev *hdev, + struct intel_version_tlv *version) +{ + struct sk_buff *skb; + const u8 param[1] = { 0xFF }; + + if (!version) + return -EINVAL; + + skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading Intel version information failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->data[0]) { + bt_dev_err(hdev, "Intel Read Version command failed (%02x)", + skb->data[0]); + kfree_skb(skb); + return -EIO; + } + + btintel_parse_version_tlv(hdev, version, skb); + + kfree_skb(skb); + return 0; +} + +/* ------- REGMAP IBT SUPPORT ------- */ + +#define IBT_REG_MODE_8BIT 0x00 +#define IBT_REG_MODE_16BIT 0x01 +#define IBT_REG_MODE_32BIT 0x02 + +struct regmap_ibt_context { + struct hci_dev *hdev; + __u16 op_write; + __u16 op_read; +}; + +struct ibt_cp_reg_access { + __le32 addr; + __u8 mode; + __u8 len; + __u8 data[]; +} __packed; + +struct ibt_rp_reg_access { + __u8 status; + __le32 addr; + __u8 data[]; +} __packed; + +static int regmap_ibt_read(void *context, const void *addr, size_t reg_size, + void *val, size_t val_size) +{ + struct regmap_ibt_context *ctx = context; + struct ibt_cp_reg_access cp; + struct ibt_rp_reg_access *rp; + struct sk_buff *skb; + int err = 0; + + if (reg_size != sizeof(__le32)) + return -EINVAL; + + switch (val_size) { + case 1: + cp.mode = IBT_REG_MODE_8BIT; + break; + case 2: + cp.mode = IBT_REG_MODE_16BIT; + break; + case 4: + cp.mode = IBT_REG_MODE_32BIT; + break; + default: + return -EINVAL; + } + + /* regmap provides a little-endian formatted addr */ + cp.addr = *(__le32 *)addr; + cp.len = val_size; + + bt_dev_dbg(ctx->hdev, "Register (0x%x) read", le32_to_cpu(cp.addr)); + + skb = hci_cmd_sync(ctx->hdev, ctx->op_read, sizeof(cp), &cp, + HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error (%d)", + le32_to_cpu(cp.addr), err); + return err; + } + + if (skb->len != sizeof(*rp) + val_size) { + bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad len", + le32_to_cpu(cp.addr)); + err = -EINVAL; + goto done; + } + + rp = (struct ibt_rp_reg_access *)skb->data; + + if (rp->addr != cp.addr) { + bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad addr", + le32_to_cpu(rp->addr)); + err = -EINVAL; + goto done; + } + + memcpy(val, rp->data, val_size); + +done: + kfree_skb(skb); + return err; +} + +static int regmap_ibt_gather_write(void *context, + const void *addr, size_t reg_size, + const void *val, size_t val_size) +{ + struct regmap_ibt_context *ctx = context; + struct ibt_cp_reg_access *cp; + struct sk_buff *skb; + int plen = sizeof(*cp) + val_size; + u8 mode; + int err = 0; + + if (reg_size != sizeof(__le32)) + return -EINVAL; + + switch (val_size) { + case 1: + mode = IBT_REG_MODE_8BIT; + break; + case 2: + mode = IBT_REG_MODE_16BIT; + break; + case 4: + mode = IBT_REG_MODE_32BIT; + break; + default: + return -EINVAL; + } + + cp = kmalloc(plen, GFP_KERNEL); + if (!cp) + return -ENOMEM; + + /* regmap provides a little-endian formatted addr/value */ + cp->addr = *(__le32 *)addr; + cp->mode = mode; + cp->len = val_size; + memcpy(&cp->data, val, val_size); + + bt_dev_dbg(ctx->hdev, "Register (0x%x) write", le32_to_cpu(cp->addr)); + + skb = hci_cmd_sync(ctx->hdev, ctx->op_write, plen, cp, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + bt_dev_err(ctx->hdev, "regmap: Register (0x%x) write error (%d)", + le32_to_cpu(cp->addr), err); + goto done; + } + kfree_skb(skb); + +done: + kfree(cp); + return err; +} + +static int regmap_ibt_write(void *context, const void *data, size_t count) +{ + /* data contains register+value, since we only support 32bit addr, + * minimum data size is 4 bytes. + */ + if (WARN_ONCE(count < 4, "Invalid register access")) + return -EINVAL; + + return regmap_ibt_gather_write(context, data, 4, data + 4, count - 4); +} + +static void regmap_ibt_free_context(void *context) +{ + kfree(context); +} + +static const struct regmap_bus regmap_ibt = { + .read = regmap_ibt_read, + .write = regmap_ibt_write, + .gather_write = regmap_ibt_gather_write, + .free_context = regmap_ibt_free_context, + .reg_format_endian_default = REGMAP_ENDIAN_LITTLE, + .val_format_endian_default = REGMAP_ENDIAN_LITTLE, +}; + +/* Config is the same for all register regions */ +static const struct regmap_config regmap_ibt_cfg = { + .name = "btintel_regmap", + .reg_bits = 32, + .val_bits = 32, +}; + +struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read, + u16 opcode_write) +{ + struct regmap_ibt_context *ctx; + + bt_dev_info(hdev, "regmap: Init R%x-W%x region", opcode_read, + opcode_write); + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return ERR_PTR(-ENOMEM); + + ctx->op_read = opcode_read; + ctx->op_write = opcode_write; + ctx->hdev = hdev; + + return regmap_init(&hdev->dev, ®map_ibt, ctx, ®map_ibt_cfg); +} +EXPORT_SYMBOL_GPL(btintel_regmap_init); + +int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param) +{ + struct intel_reset params = { 0x00, 0x01, 0x00, 0x01, 0x00000000 }; + struct sk_buff *skb; + + params.boot_param = cpu_to_le32(boot_param); + + skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), ¶ms, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Failed to send Intel Reset command"); + return PTR_ERR(skb); + } + + kfree_skb(skb); + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_send_intel_reset); + +int btintel_read_boot_params(struct hci_dev *hdev, + struct intel_boot_params *params) +{ + struct sk_buff *skb; + + skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*params)) { + bt_dev_err(hdev, "Intel boot parameters size mismatch"); + kfree_skb(skb); + return -EILSEQ; + } + + memcpy(params, skb->data, sizeof(*params)); + + kfree_skb(skb); + + if (params->status) { + bt_dev_err(hdev, "Intel boot parameters command failed (%02x)", + params->status); + return -bt_to_errno(params->status); + } + + bt_dev_info(hdev, "Device revision is %u", + le16_to_cpu(params->dev_revid)); + + bt_dev_info(hdev, "Secure boot is %s", + params->secure_boot ? "enabled" : "disabled"); + + bt_dev_info(hdev, "OTP lock is %s", + params->otp_lock ? "enabled" : "disabled"); + + bt_dev_info(hdev, "API lock is %s", + params->api_lock ? "enabled" : "disabled"); + + bt_dev_info(hdev, "Debug lock is %s", + params->debug_lock ? "enabled" : "disabled"); + + bt_dev_info(hdev, "Minimum firmware build %u week %u %u", + params->min_fw_build_nn, params->min_fw_build_cw, + 2000 + params->min_fw_build_yy); + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_read_boot_params); + +static int btintel_sfi_rsa_header_secure_send(struct hci_dev *hdev, + const struct firmware *fw) +{ + int err; + + /* Start the firmware download transaction with the Init fragment + * represented by the 128 bytes of CSS header. + */ + err = btintel_secure_send(hdev, 0x00, 128, fw->data); + if (err < 0) { + bt_dev_err(hdev, "Failed to send firmware header (%d)", err); + goto done; + } + + /* Send the 256 bytes of public key information from the firmware + * as the PKey fragment. + */ + err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128); + if (err < 0) { + bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err); + goto done; + } + + /* Send the 256 bytes of signature information from the firmware + * as the Sign fragment. + */ + err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388); + if (err < 0) { + bt_dev_err(hdev, "Failed to send firmware signature (%d)", err); + goto done; + } + +done: + return err; +} + +static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev, + const struct firmware *fw) +{ + int err; + + /* Start the firmware download transaction with the Init fragment + * represented by the 128 bytes of CSS header. + */ + err = btintel_secure_send(hdev, 0x00, 128, fw->data + 644); + if (err < 0) { + bt_dev_err(hdev, "Failed to send firmware header (%d)", err); + return err; + } + + /* Send the 96 bytes of public key information from the firmware + * as the PKey fragment. + */ + err = btintel_secure_send(hdev, 0x03, 96, fw->data + 644 + 128); + if (err < 0) { + bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err); + return err; + } + + /* Send the 96 bytes of signature information from the firmware + * as the Sign fragment + */ + err = btintel_secure_send(hdev, 0x02, 96, fw->data + 644 + 224); + if (err < 0) { + bt_dev_err(hdev, "Failed to send firmware signature (%d)", + err); + return err; + } + return 0; +} + +static int btintel_download_firmware_payload(struct hci_dev *hdev, + const struct firmware *fw, + size_t offset) +{ + int err; + const u8 *fw_ptr; + u32 frag_len; + + fw_ptr = fw->data + offset; + frag_len = 0; + err = -EINVAL; + + while (fw_ptr - fw->data < fw->size) { + struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len); + + frag_len += sizeof(*cmd) + cmd->plen; + + /* The parameter length of the secure send command requires + * a 4 byte alignment. It happens so that the firmware file + * contains proper Intel_NOP commands to align the fragments + * as needed. + * + * Send set of commands with 4 byte alignment from the + * firmware data buffer as a single Data fragement. + */ + if (!(frag_len % 4)) { + err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr); + if (err < 0) { + bt_dev_err(hdev, + "Failed to send firmware data (%d)", + err); + goto done; + } + + fw_ptr += frag_len; + frag_len = 0; + } + } + +done: + return err; +} + +static bool btintel_firmware_version(struct hci_dev *hdev, + u8 num, u8 ww, u8 yy, + const struct firmware *fw, + u32 *boot_addr) +{ + const u8 *fw_ptr; + + fw_ptr = fw->data; + + while (fw_ptr - fw->data < fw->size) { + struct hci_command_hdr *cmd = (void *)(fw_ptr); + + /* Each SKU has a different reset parameter to use in the + * HCI_Intel_Reset command and it is embedded in the firmware + * data. So, instead of using static value per SKU, check + * the firmware data and save it for later use. + */ + if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) { + struct cmd_write_boot_params *params; + + params = (void *)(fw_ptr + sizeof(*cmd)); + + *boot_addr = le32_to_cpu(params->boot_addr); + + bt_dev_info(hdev, "Boot Address: 0x%x", *boot_addr); + + bt_dev_info(hdev, "Firmware Version: %u-%u.%u", + params->fw_build_num, params->fw_build_ww, + params->fw_build_yy); + + return (num == params->fw_build_num && + ww == params->fw_build_ww && + yy == params->fw_build_yy); + } + + fw_ptr += sizeof(*cmd) + cmd->plen; + } + + return false; +} + +int btintel_download_firmware(struct hci_dev *hdev, + struct intel_version *ver, + const struct firmware *fw, + u32 *boot_param) +{ + int err; + + /* SfP and WsP don't seem to update the firmware version on file + * so version checking is currently not possible. + */ + switch (ver->hw_variant) { + case 0x0b: /* SfP */ + case 0x0c: /* WsP */ + /* Skip version checking */ + break; + default: + + /* Skip download if firmware has the same version */ + if (btintel_firmware_version(hdev, ver->fw_build_num, + ver->fw_build_ww, ver->fw_build_yy, + fw, boot_param)) { + bt_dev_info(hdev, "Firmware already loaded"); + /* Return -EALREADY to indicate that the firmware has + * already been loaded. + */ + return -EALREADY; + } + } + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x06 identifies + * the bootloader and the value 0x23 identifies the operational + * firmware. + * + * If the firmware version has changed that means it needs to be reset + * to bootloader when operational so the new firmware can be loaded. + */ + if (ver->fw_variant == 0x23) + return -EINVAL; + + err = btintel_sfi_rsa_header_secure_send(hdev, fw); + if (err) + return err; + + return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN); +} +EXPORT_SYMBOL_GPL(btintel_download_firmware); + +static int btintel_download_fw_tlv(struct hci_dev *hdev, + struct intel_version_tlv *ver, + const struct firmware *fw, u32 *boot_param, + u8 hw_variant, u8 sbe_type) +{ + int err; + u32 css_header_ver; + + /* Skip download if firmware has the same version */ + if (btintel_firmware_version(hdev, ver->min_fw_build_nn, + ver->min_fw_build_cw, + ver->min_fw_build_yy, + fw, boot_param)) { + bt_dev_info(hdev, "Firmware already loaded"); + /* Return -EALREADY to indicate that firmware has + * already been loaded. + */ + return -EALREADY; + } + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x01 identifies + * the bootloader and the value 0x03 identifies the operational + * firmware. + * + * If the firmware version has changed that means it needs to be reset + * to bootloader when operational so the new firmware can be loaded. + */ + if (ver->img_type == 0x03) + return -EINVAL; + + /* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support + * only RSA secure boot engine. Hence, the corresponding sfi file will + * have RSA header of 644 bytes followed by Command Buffer. + * + * iBT hardware variants 0x17, 0x18 onwards support both RSA and ECDSA + * secure boot engine. As a result, the corresponding sfi file will + * have RSA header of 644, ECDSA header of 320 bytes followed by + * Command Buffer. + * + * CSS Header byte positions 0x08 to 0x0B represent the CSS Header + * version: RSA(0x00010000) , ECDSA (0x00020000) + */ + css_header_ver = get_unaligned_le32(fw->data + CSS_HEADER_OFFSET); + if (css_header_ver != 0x00010000) { + bt_dev_err(hdev, "Invalid CSS Header version"); + return -EINVAL; + } + + if (hw_variant <= 0x14) { + if (sbe_type != 0x00) { + bt_dev_err(hdev, "Invalid SBE type for hardware variant (%d)", + hw_variant); + return -EINVAL; + } + + err = btintel_sfi_rsa_header_secure_send(hdev, fw); + if (err) + return err; + + err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN); + if (err) + return err; + } else if (hw_variant >= 0x17) { + /* Check if CSS header for ECDSA follows the RSA header */ + if (fw->data[ECDSA_OFFSET] != 0x06) + return -EINVAL; + + /* Check if the CSS Header version is ECDSA(0x00020000) */ + css_header_ver = get_unaligned_le32(fw->data + ECDSA_OFFSET + CSS_HEADER_OFFSET); + if (css_header_ver != 0x00020000) { + bt_dev_err(hdev, "Invalid CSS Header version"); + return -EINVAL; + } + + if (sbe_type == 0x00) { + err = btintel_sfi_rsa_header_secure_send(hdev, fw); + if (err) + return err; + + err = btintel_download_firmware_payload(hdev, fw, + RSA_HEADER_LEN + ECDSA_HEADER_LEN); + if (err) + return err; + } else if (sbe_type == 0x01) { + err = btintel_sfi_ecdsa_header_secure_send(hdev, fw); + if (err) + return err; + + err = btintel_download_firmware_payload(hdev, fw, + RSA_HEADER_LEN + ECDSA_HEADER_LEN); + if (err) + return err; + } + } + return 0; +} + +static void btintel_reset_to_bootloader(struct hci_dev *hdev) +{ + struct intel_reset params; + struct sk_buff *skb; + + /* Send Intel Reset command. This will result in + * re-enumeration of BT controller. + * + * Intel Reset parameter description: + * reset_type : 0x00 (Soft reset), + * 0x01 (Hard reset) + * patch_enable : 0x00 (Do not enable), + * 0x01 (Enable) + * ddc_reload : 0x00 (Do not reload), + * 0x01 (Reload) + * boot_option: 0x00 (Current image), + * 0x01 (Specified boot address) + * boot_param: Boot address + * + */ + params.reset_type = 0x01; + params.patch_enable = 0x01; + params.ddc_reload = 0x01; + params.boot_option = 0x00; + params.boot_param = cpu_to_le32(0x00000000); + + skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), + ¶ms, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "FW download error recovery failed (%ld)", + PTR_ERR(skb)); + return; + } + bt_dev_info(hdev, "Intel reset sent to retry FW download"); + kfree_skb(skb); + + /* Current Intel BT controllers(ThP/JfP) hold the USB reset + * lines for 2ms when it receives Intel Reset in bootloader mode. + * Whereas, the upcoming Intel BT controllers will hold USB reset + * for 150ms. To keep the delay generic, 150ms is chosen here. + */ + msleep(150); +} + +static int btintel_read_debug_features(struct hci_dev *hdev, + struct intel_debug_features *features) +{ + struct sk_buff *skb; + u8 page_no = 1; + + /* Intel controller supports two pages, each page is of 128-bit + * feature bit mask. And each bit defines specific feature support + */ + skb = __hci_cmd_sync(hdev, 0xfca6, sizeof(page_no), &page_no, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading supported features failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != (sizeof(features->page1) + 3)) { + bt_dev_err(hdev, "Supported features event size mismatch"); + kfree_skb(skb); + return -EILSEQ; + } + + memcpy(features->page1, skb->data + 3, sizeof(features->page1)); + + /* Read the supported features page2 if required in future. + */ + kfree_skb(skb); + return 0; +} + +static int btintel_set_debug_features(struct hci_dev *hdev, + const struct intel_debug_features *features) +{ + u8 mask[11] = { 0x0a, 0x92, 0x02, 0x7f, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00 }; + u8 period[5] = { 0x04, 0x91, 0x02, 0x05, 0x00 }; + u8 trace_enable = 0x02; + struct sk_buff *skb; + + if (!features) { + bt_dev_warn(hdev, "Debug features not read"); + return -EINVAL; + } + + if (!(features->page1[0] & 0x3f)) { + bt_dev_info(hdev, "Telemetry exception format not supported"); + return 0; + } + + skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + skb = __hci_cmd_sync(hdev, 0xfc8b, 5, period, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Setting periodicity for link statistics traces failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Enable tracing of link statistics events failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + bt_dev_info(hdev, "set debug features: trace_enable 0x%02x mask 0x%02x", + trace_enable, mask[3]); + + return 0; +} + +static int btintel_reset_debug_features(struct hci_dev *hdev, + const struct intel_debug_features *features) +{ + u8 mask[11] = { 0x0a, 0x92, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00 }; + u8 trace_enable = 0x00; + struct sk_buff *skb; + + if (!features) { + bt_dev_warn(hdev, "Debug features not read"); + return -EINVAL; + } + + if (!(features->page1[0] & 0x3f)) { + bt_dev_info(hdev, "Telemetry exception format not supported"); + return 0; + } + + /* Should stop the trace before writing ddc event mask. */ + skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Stop tracing of link statistics events failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + bt_dev_info(hdev, "reset debug features: trace_enable 0x%02x mask 0x%02x", + trace_enable, mask[3]); + + return 0; +} + +int btintel_set_quality_report(struct hci_dev *hdev, bool enable) +{ + struct intel_debug_features features; + int err; + + bt_dev_dbg(hdev, "enable %d", enable); + + /* Read the Intel supported features and if new exception formats + * supported, need to load the additional DDC config to enable. + */ + err = btintel_read_debug_features(hdev, &features); + if (err) + return err; + + /* Set or reset the debug features. */ + if (enable) + err = btintel_set_debug_features(hdev, &features); + else + err = btintel_reset_debug_features(hdev, &features); + + return err; +} +EXPORT_SYMBOL_GPL(btintel_set_quality_report); + +static const struct firmware *btintel_legacy_rom_get_fw(struct hci_dev *hdev, + struct intel_version *ver) +{ + const struct firmware *fw; + char fwname[64]; + int ret; + + snprintf(fwname, sizeof(fwname), + "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq", + ver->hw_platform, ver->hw_variant, ver->hw_revision, + ver->fw_variant, ver->fw_revision, ver->fw_build_num, + ver->fw_build_ww, ver->fw_build_yy); + + ret = request_firmware(&fw, fwname, &hdev->dev); + if (ret < 0) { + if (ret == -EINVAL) { + bt_dev_err(hdev, "Intel firmware file request failed (%d)", + ret); + return NULL; + } + + bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)", + fwname, ret); + + /* If the correct firmware patch file is not found, use the + * default firmware patch file instead + */ + snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq", + ver->hw_platform, ver->hw_variant); + if (request_firmware(&fw, fwname, &hdev->dev) < 0) { + bt_dev_err(hdev, "failed to open default fw file: %s", + fwname); + return NULL; + } + } + + bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname); + + return fw; +} + +static int btintel_legacy_rom_patching(struct hci_dev *hdev, + const struct firmware *fw, + const u8 **fw_ptr, int *disable_patch) +{ + struct sk_buff *skb; + struct hci_command_hdr *cmd; + const u8 *cmd_param; + struct hci_event_hdr *evt = NULL; + const u8 *evt_param = NULL; + int remain = fw->size - (*fw_ptr - fw->data); + + /* The first byte indicates the types of the patch command or event. + * 0x01 means HCI command and 0x02 is HCI event. If the first bytes + * in the current firmware buffer doesn't start with 0x01 or + * the size of remain buffer is smaller than HCI command header, + * the firmware file is corrupted and it should stop the patching + * process. + */ + if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) { + bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read"); + return -EINVAL; + } + (*fw_ptr)++; + remain--; + + cmd = (struct hci_command_hdr *)(*fw_ptr); + *fw_ptr += sizeof(*cmd); + remain -= sizeof(*cmd); + + /* Ensure that the remain firmware data is long enough than the length + * of command parameter. If not, the firmware file is corrupted. + */ + if (remain < cmd->plen) { + bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len"); + return -EFAULT; + } + + /* If there is a command that loads a patch in the firmware + * file, then enable the patch upon success, otherwise just + * disable the manufacturer mode, for example patch activation + * is not required when the default firmware patch file is used + * because there are no patch data to load. + */ + if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e) + *disable_patch = 0; + + cmd_param = *fw_ptr; + *fw_ptr += cmd->plen; + remain -= cmd->plen; + + /* This reads the expected events when the above command is sent to the + * device. Some vendor commands expects more than one events, for + * example command status event followed by vendor specific event. + * For this case, it only keeps the last expected event. so the command + * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of + * last expected event. + */ + while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) { + (*fw_ptr)++; + remain--; + + evt = (struct hci_event_hdr *)(*fw_ptr); + *fw_ptr += sizeof(*evt); + remain -= sizeof(*evt); + + if (remain < evt->plen) { + bt_dev_err(hdev, "Intel fw corrupted: invalid evt len"); + return -EFAULT; + } + + evt_param = *fw_ptr; + *fw_ptr += evt->plen; + remain -= evt->plen; + } + + /* Every HCI commands in the firmware file has its correspond event. + * If event is not found or remain is smaller than zero, the firmware + * file is corrupted. + */ + if (!evt || !evt_param || remain < 0) { + bt_dev_err(hdev, "Intel fw corrupted: invalid evt read"); + return -EFAULT; + } + + skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen, + cmd_param, evt->evt, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)", + cmd->opcode, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + /* It ensures that the returned event matches the event data read from + * the firmware file. At fist, it checks the length and then + * the contents of the event. + */ + if (skb->len != evt->plen) { + bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)", + le16_to_cpu(cmd->opcode)); + kfree_skb(skb); + return -EFAULT; + } + + if (memcmp(skb->data, evt_param, evt->plen)) { + bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)", + le16_to_cpu(cmd->opcode)); + kfree_skb(skb); + return -EFAULT; + } + kfree_skb(skb); + + return 0; +} + +static int btintel_legacy_rom_setup(struct hci_dev *hdev, + struct intel_version *ver) +{ + const struct firmware *fw; + const u8 *fw_ptr; + int disable_patch, err; + struct intel_version new_ver; + + BT_DBG("%s", hdev->name); + + /* fw_patch_num indicates the version of patch the device currently + * have. If there is no patch data in the device, it is always 0x00. + * So, if it is other than 0x00, no need to patch the device again. + */ + if (ver->fw_patch_num) { + bt_dev_info(hdev, + "Intel device is already patched. patch num: %02x", + ver->fw_patch_num); + goto complete; + } + + /* Opens the firmware patch file based on the firmware version read + * from the controller. If it fails to open the matching firmware + * patch file, it tries to open the default firmware patch file. + * If no patch file is found, allow the device to operate without + * a patch. + */ + fw = btintel_legacy_rom_get_fw(hdev, ver); + if (!fw) + goto complete; + fw_ptr = fw->data; + + /* Enable the manufacturer mode of the controller. + * Only while this mode is enabled, the driver can download the + * firmware patch data and configuration parameters. + */ + err = btintel_enter_mfg(hdev); + if (err) { + release_firmware(fw); + return err; + } + + disable_patch = 1; + + /* The firmware data file consists of list of Intel specific HCI + * commands and its expected events. The first byte indicates the + * type of the message, either HCI command or HCI event. + * + * It reads the command and its expected event from the firmware file, + * and send to the controller. Once __hci_cmd_sync_ev() returns, + * the returned event is compared with the event read from the firmware + * file and it will continue until all the messages are downloaded to + * the controller. + * + * Once the firmware patching is completed successfully, + * the manufacturer mode is disabled with reset and activating the + * downloaded patch. + * + * If the firmware patching fails, the manufacturer mode is + * disabled with reset and deactivating the patch. + * + * If the default patch file is used, no reset is done when disabling + * the manufacturer. + */ + while (fw->size > fw_ptr - fw->data) { + int ret; + + ret = btintel_legacy_rom_patching(hdev, fw, &fw_ptr, + &disable_patch); + if (ret < 0) + goto exit_mfg_deactivate; + } + + release_firmware(fw); + + if (disable_patch) + goto exit_mfg_disable; + + /* Patching completed successfully and disable the manufacturer mode + * with reset and activate the downloaded firmware patches. + */ + err = btintel_exit_mfg(hdev, true, true); + if (err) + return err; + + /* Need build number for downloaded fw patches in + * every power-on boot + */ + err = btintel_read_version(hdev, &new_ver); + if (err) + return err; + + bt_dev_info(hdev, "Intel BT fw patch 0x%02x completed & activated", + new_ver.fw_patch_num); + + goto complete; + +exit_mfg_disable: + /* Disable the manufacturer mode without reset */ + err = btintel_exit_mfg(hdev, false, false); + if (err) + return err; + + bt_dev_info(hdev, "Intel firmware patch completed"); + + goto complete; + +exit_mfg_deactivate: + release_firmware(fw); + + /* Patching failed. Disable the manufacturer mode with reset and + * deactivate the downloaded firmware patches. + */ + err = btintel_exit_mfg(hdev, true, false); + if (err) + return err; + + bt_dev_info(hdev, "Intel firmware patch completed and deactivated"); + +complete: + /* Set the event mask for Intel specific vendor events. This enables + * a few extra events that are useful during general operation. + */ + btintel_set_event_mask_mfg(hdev, false); + + btintel_check_bdaddr(hdev); + + return 0; +} + +static int btintel_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec) +{ + ktime_t delta, rettime; + unsigned long long duration; + int err; + + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + + bt_dev_info(hdev, "Waiting for firmware download to complete"); + + err = btintel_wait_on_flag_timeout(hdev, INTEL_DOWNLOADING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(msec)); + if (err == -EINTR) { + bt_dev_err(hdev, "Firmware loading interrupted"); + return err; + } + + if (err) { + bt_dev_err(hdev, "Firmware loading timeout"); + return -ETIMEDOUT; + } + + if (btintel_test_flag(hdev, INTEL_FIRMWARE_FAILED)) { + bt_dev_err(hdev, "Firmware loading failed"); + return -ENOEXEC; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long)ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration); + + return 0; +} + +static int btintel_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec) +{ + ktime_t delta, rettime; + unsigned long long duration; + int err; + + bt_dev_info(hdev, "Waiting for device to boot"); + + err = btintel_wait_on_flag_timeout(hdev, INTEL_BOOTING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(msec)); + if (err == -EINTR) { + bt_dev_err(hdev, "Device boot interrupted"); + return -EINTR; + } + + if (err) { + bt_dev_err(hdev, "Device boot timeout"); + return -ETIMEDOUT; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Device booted in %llu usecs", duration); + + return 0; +} + +static int btintel_boot(struct hci_dev *hdev, u32 boot_addr) +{ + ktime_t calltime; + int err; + + calltime = ktime_get(); + + btintel_set_flag(hdev, INTEL_BOOTING); + + err = btintel_send_intel_reset(hdev, boot_addr); + if (err) { + bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err); + btintel_reset_to_bootloader(hdev); + return err; + } + + /* The bootloader will not indicate when the device is ready. This + * is done by the operational firmware sending bootup notification. + * + * Booting into operational firmware should not take longer than + * 1 second. However if that happens, then just fail the setup + * since something went wrong. + */ + err = btintel_boot_wait(hdev, calltime, 1000); + if (err == -ETIMEDOUT) + btintel_reset_to_bootloader(hdev); + + return err; +} + +static int btintel_get_fw_name(struct intel_version *ver, + struct intel_boot_params *params, + char *fw_name, size_t len, + const char *suffix) +{ + switch (ver->hw_variant) { + case 0x0b: /* SfP */ + case 0x0c: /* WsP */ + snprintf(fw_name, len, "intel/ibt-%u-%u.%s", + le16_to_cpu(ver->hw_variant), + le16_to_cpu(params->dev_revid), + suffix); + break; + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s", + le16_to_cpu(ver->hw_variant), + le16_to_cpu(ver->hw_revision), + le16_to_cpu(ver->fw_revision), + suffix); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int btintel_download_fw(struct hci_dev *hdev, + struct intel_version *ver, + struct intel_boot_params *params, + u32 *boot_param) +{ + const struct firmware *fw; + char fwname[64]; + int err; + ktime_t calltime; + + if (!ver || !params) + return -EINVAL; + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x06 identifies + * the bootloader and the value 0x23 identifies the operational + * firmware. + * + * When the operational firmware is already present, then only + * the check for valid Bluetooth device address is needed. This + * determines if the device will be added as configured or + * unconfigured controller. + * + * It is not possible to use the Secure Boot Parameters in this + * case since that command is only available in bootloader mode. + */ + if (ver->fw_variant == 0x23) { + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + btintel_check_bdaddr(hdev); + + /* SfP and WsP don't seem to update the firmware version on file + * so version checking is currently possible. + */ + switch (ver->hw_variant) { + case 0x0b: /* SfP */ + case 0x0c: /* WsP */ + return 0; + } + + /* Proceed to download to check if the version matches */ + goto download; + } + + /* Read the secure boot parameters to identify the operating + * details of the bootloader. + */ + err = btintel_read_boot_params(hdev, params); + if (err) + return err; + + /* It is required that every single firmware fragment is acknowledged + * with a command complete event. If the boot parameters indicate + * that this bootloader does not send them, then abort the setup. + */ + if (params->limited_cce != 0x00) { + bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)", + params->limited_cce); + return -EINVAL; + } + + /* If the OTP has no valid Bluetooth device address, then there will + * also be no valid address for the operational firmware. + */ + if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) { + bt_dev_info(hdev, "No device address configured"); + set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); + } + +download: + /* With this Intel bootloader only the hardware variant and device + * revision information are used to select the right firmware for SfP + * and WsP. + * + * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi. + * + * Currently the supported hardware variants are: + * 11 (0x0b) for iBT3.0 (LnP/SfP) + * 12 (0x0c) for iBT3.5 (WsP) + * + * For ThP/JfP and for future SKU's, the FW name varies based on HW + * variant, HW revision and FW revision, as these are dependent on CNVi + * and RF Combination. + * + * 17 (0x11) for iBT3.5 (JfP) + * 18 (0x12) for iBT3.5 (ThP) + * + * The firmware file name for these will be + * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi. + * + */ + err = btintel_get_fw_name(ver, params, fwname, sizeof(fwname), "sfi"); + if (err < 0) { + if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + return 0; + } + + bt_dev_err(hdev, "Unsupported Intel firmware naming"); + return -EINVAL; + } + + err = firmware_request_nowarn(&fw, fwname, &hdev->dev); + if (err < 0) { + if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + return 0; + } + + bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", + fwname, err); + return err; + } + + bt_dev_info(hdev, "Found device firmware: %s", fwname); + + if (fw->size < 644) { + bt_dev_err(hdev, "Invalid size of firmware file (%zu)", + fw->size); + err = -EBADF; + goto done; + } + + calltime = ktime_get(); + + btintel_set_flag(hdev, INTEL_DOWNLOADING); + + /* Start firmware downloading and get boot parameter */ + err = btintel_download_firmware(hdev, ver, fw, boot_param); + if (err < 0) { + if (err == -EALREADY) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + err = 0; + goto done; + } + + /* When FW download fails, send Intel Reset to retry + * FW download. + */ + btintel_reset_to_bootloader(hdev); + goto done; + } + + /* Before switching the device into operational mode and with that + * booting the loaded firmware, wait for the bootloader notification + * that all fragments have been successfully received. + * + * When the event processing receives the notification, then the + * INTEL_DOWNLOADING flag will be cleared. + * + * The firmware loading should not take longer than 5 seconds + * and thus just timeout if that happens and fail the setup + * of this device. + */ + err = btintel_download_wait(hdev, calltime, 5000); + if (err == -ETIMEDOUT) + btintel_reset_to_bootloader(hdev); + +done: + release_firmware(fw); + return err; +} + +static int btintel_bootloader_setup(struct hci_dev *hdev, + struct intel_version *ver) +{ + struct intel_version new_ver; + struct intel_boot_params params; + u32 boot_param; + char ddcname[64]; + int err; + + BT_DBG("%s", hdev->name); + + /* Set the default boot parameter to 0x0 and it is updated to + * SKU specific boot parameter after reading Intel_Write_Boot_Params + * command while downloading the firmware. + */ + boot_param = 0x00000000; + + btintel_set_flag(hdev, INTEL_BOOTLOADER); + + err = btintel_download_fw(hdev, ver, ¶ms, &boot_param); + if (err) + return err; + + /* controller is already having an operational firmware */ + if (ver->fw_variant == 0x23) + goto finish; + + err = btintel_boot(hdev, boot_param); + if (err) + return err; + + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + + err = btintel_get_fw_name(ver, ¶ms, ddcname, + sizeof(ddcname), "ddc"); + + if (err < 0) { + bt_dev_err(hdev, "Unsupported Intel firmware naming"); + } else { + /* Once the device is running in operational mode, it needs to + * apply the device configuration (DDC) parameters. + * + * The device can work without DDC parameters, so even if it + * fails to load the file, no need to fail the setup. + */ + btintel_load_ddc_config(hdev, ddcname); + } + + hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT); + + /* Read the Intel version information after loading the FW */ + err = btintel_read_version(hdev, &new_ver); + if (err) + return err; + + btintel_version_info(hdev, &new_ver); + +finish: + /* Set the event mask for Intel specific vendor events. This enables + * a few extra events that are useful during general operation. It + * does not enable any debugging related events. + * + * The device will function correctly without these events enabled + * and thus no need to fail the setup. + */ + btintel_set_event_mask(hdev, false); + + return 0; +} + +static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver, + char *fw_name, size_t len, + const char *suffix) +{ + /* The firmware file name for new generation controllers will be + * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> + */ + snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", + INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top), + INTEL_CNVX_TOP_STEP(ver->cnvi_top)), + INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top), + INTEL_CNVX_TOP_STEP(ver->cnvr_top)), + suffix); +} + +static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev, + struct intel_version_tlv *ver, + u32 *boot_param) +{ + const struct firmware *fw; + char fwname[64]; + int err; + ktime_t calltime; + + if (!ver || !boot_param) + return -EINVAL; + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x03 identifies + * the bootloader and the value 0x23 identifies the operational + * firmware. + * + * When the operational firmware is already present, then only + * the check for valid Bluetooth device address is needed. This + * determines if the device will be added as configured or + * unconfigured controller. + * + * It is not possible to use the Secure Boot Parameters in this + * case since that command is only available in bootloader mode. + */ + if (ver->img_type == 0x03) { + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + btintel_check_bdaddr(hdev); + } else { + /* + * Check for valid bd address in boot loader mode. Device + * will be marked as unconfigured if empty bd address is + * found. + */ + if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) { + bt_dev_info(hdev, "No device address configured"); + set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); + } + } + + btintel_get_fw_name_tlv(ver, fwname, sizeof(fwname), "sfi"); + err = firmware_request_nowarn(&fw, fwname, &hdev->dev); + if (err < 0) { + if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + return 0; + } + + bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", + fwname, err); + + return err; + } + + bt_dev_info(hdev, "Found device firmware: %s", fwname); + + if (fw->size < 644) { + bt_dev_err(hdev, "Invalid size of firmware file (%zu)", + fw->size); + err = -EBADF; + goto done; + } + + calltime = ktime_get(); + + btintel_set_flag(hdev, INTEL_DOWNLOADING); + + /* Start firmware downloading and get boot parameter */ + err = btintel_download_fw_tlv(hdev, ver, fw, boot_param, + INTEL_HW_VARIANT(ver->cnvi_bt), + ver->sbe_type); + if (err < 0) { + if (err == -EALREADY) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + err = 0; + goto done; + } + + /* When FW download fails, send Intel Reset to retry + * FW download. + */ + btintel_reset_to_bootloader(hdev); + goto done; + } + + /* Before switching the device into operational mode and with that + * booting the loaded firmware, wait for the bootloader notification + * that all fragments have been successfully received. + * + * When the event processing receives the notification, then the + * BTUSB_DOWNLOADING flag will be cleared. + * + * The firmware loading should not take longer than 5 seconds + * and thus just timeout if that happens and fail the setup + * of this device. + */ + err = btintel_download_wait(hdev, calltime, 5000); + if (err == -ETIMEDOUT) + btintel_reset_to_bootloader(hdev); + +done: + release_firmware(fw); + return err; +} + +static int btintel_get_codec_config_data(struct hci_dev *hdev, + __u8 link, struct bt_codec *codec, + __u8 *ven_len, __u8 **ven_data) +{ + int err = 0; + + if (!ven_data || !ven_len) + return -EINVAL; + + *ven_len = 0; + *ven_data = NULL; + + if (link != ESCO_LINK) { + bt_dev_err(hdev, "Invalid link type(%u)", link); + return -EINVAL; + } + + *ven_data = kmalloc(sizeof(__u8), GFP_KERNEL); + if (!*ven_data) { + err = -ENOMEM; + goto error; + } + + /* supports only CVSD and mSBC offload codecs */ + switch (codec->id) { + case 0x02: + **ven_data = 0x00; + break; + case 0x05: + **ven_data = 0x01; + break; + default: + err = -EINVAL; + bt_dev_err(hdev, "Invalid codec id(%u)", codec->id); + goto error; + } + /* codec and its capabilities are pre-defined to ids + * preset id = 0x00 represents CVSD codec with sampling rate 8K + * preset id = 0x01 represents mSBC codec with sampling rate 16K + */ + *ven_len = sizeof(__u8); + return err; + +error: + kfree(*ven_data); + *ven_data = NULL; + return err; +} + +static int btintel_get_data_path_id(struct hci_dev *hdev, __u8 *data_path_id) +{ + /* Intel uses 1 as data path id for all the usecases */ + *data_path_id = 1; + return 0; +} + +static int btintel_configure_offload(struct hci_dev *hdev) +{ + struct sk_buff *skb; + int err = 0; + struct intel_offload_use_cases *use_cases; + + skb = __hci_cmd_sync(hdev, 0xfc86, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading offload use cases failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len < sizeof(*use_cases)) { + err = -EIO; + goto error; + } + + use_cases = (void *)skb->data; + + if (use_cases->status) { + err = -bt_to_errno(skb->data[0]); + goto error; + } + + if (use_cases->preset[0] & 0x03) { + hdev->get_data_path_id = btintel_get_data_path_id; + hdev->get_codec_config_data = btintel_get_codec_config_data; + } +error: + kfree_skb(skb); + return err; +} + +static int btintel_bootloader_setup_tlv(struct hci_dev *hdev, + struct intel_version_tlv *ver) +{ + u32 boot_param; + char ddcname[64]; + int err; + struct intel_version_tlv new_ver; + + bt_dev_dbg(hdev, ""); + + /* Set the default boot parameter to 0x0 and it is updated to + * SKU specific boot parameter after reading Intel_Write_Boot_Params + * command while downloading the firmware. + */ + boot_param = 0x00000000; + + btintel_set_flag(hdev, INTEL_BOOTLOADER); + + err = btintel_prepare_fw_download_tlv(hdev, ver, &boot_param); + if (err) + return err; + + /* check if controller is already having an operational firmware */ + if (ver->img_type == 0x03) + goto finish; + + err = btintel_boot(hdev, boot_param); + if (err) + return err; + + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + + btintel_get_fw_name_tlv(ver, ddcname, sizeof(ddcname), "ddc"); + /* Once the device is running in operational mode, it needs to + * apply the device configuration (DDC) parameters. + * + * The device can work without DDC parameters, so even if it + * fails to load the file, no need to fail the setup. + */ + btintel_load_ddc_config(hdev, ddcname); + + /* Read supported use cases and set callbacks to fetch datapath id */ + btintel_configure_offload(hdev); + + hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT); + + /* Read the Intel version information after loading the FW */ + err = btintel_read_version_tlv(hdev, &new_ver); + if (err) + return err; + + btintel_version_info_tlv(hdev, &new_ver); + +finish: + /* Set the event mask for Intel specific vendor events. This enables + * a few extra events that are useful during general operation. It + * does not enable any debugging related events. + * + * The device will function correctly without these events enabled + * and thus no need to fail the setup. + */ + btintel_set_event_mask(hdev, false); + + return 0; +} + +static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) +{ + switch (hw_variant) { + /* Legacy bootloader devices that supports MSFT Extension */ + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + /* All Intel new genration controllers support the Microsoft vendor + * extension are using 0xFC1E for VsMsftOpCode. + */ + case 0x17: + case 0x18: + case 0x19: + case 0x1b: + hci_set_msft_opcode(hdev, 0xFC1E); + break; + default: + /* Not supported */ + break; + } +} + +static int btintel_setup_combined(struct hci_dev *hdev) +{ + const u8 param[1] = { 0xFF }; + struct intel_version ver; + struct intel_version_tlv ver_tlv; + struct sk_buff *skb; + int err; + + BT_DBG("%s", hdev->name); + + /* The some controllers have a bug with the first HCI command sent to it + * returning number of completed commands as zero. This would stall the + * command processing in the Bluetooth core. + * + * As a workaround, send HCI Reset command first which will reset the + * number of completed commands and allow normal command processing + * from now on. + * + * Regarding the INTEL_BROKEN_SHUTDOWN_LED flag, these devices maybe + * in the SW_RFKILL ON state as a workaround of fixing LED issue during + * the shutdown() procedure, and once the device is in SW_RFKILL ON + * state, the only way to exit out of it is sending the HCI_Reset + * command. + */ + if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD) || + btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) { + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, + "sending initial HCI reset failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + } + + /* Starting from TyP device, the command parameter and response are + * changed even though the OCF for HCI_Intel_Read_Version command + * remains same. The legacy devices can handle even if the + * command has a parameter and returns a correct version information. + * So, it uses new format to support both legacy and new format. + */ + skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading Intel version command failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + /* Check the status */ + if (skb->data[0]) { + bt_dev_err(hdev, "Intel Read Version command failed (%02x)", + skb->data[0]); + err = -EIO; + goto exit_error; + } + + /* Apply the common HCI quirks for Intel device */ + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); + + /* Set up the quality report callback for Intel devices */ + hdev->set_quality_report = btintel_set_quality_report; + + /* For Legacy device, check the HW platform value and size */ + if (skb->len == sizeof(ver) && skb->data[1] == 0x37) { + bt_dev_dbg(hdev, "Read the legacy Intel version information"); + + memcpy(&ver, skb->data, sizeof(ver)); + + /* Display version information */ + btintel_version_info(hdev, &ver); + + /* Check for supported iBT hardware variants of this firmware + * loading method. + * + * This check has been put in place to ensure correct forward + * compatibility options when newer hardware variants come + * along. + */ + switch (ver.hw_variant) { + case 0x07: /* WP */ + case 0x08: /* StP */ + /* Legacy ROM product */ + btintel_set_flag(hdev, INTEL_ROM_LEGACY); + + /* Apply the device specific HCI quirks + * + * WBS for SdP - For the Legacy ROM products, only SdP + * supports the WBS. But the version information is not + * enough to use here because the StP2 and SdP have same + * hw_variant and fw_variant. So, this flag is set by + * the transport driver (btusb) based on the HW info + * (idProduct) + */ + if (!btintel_test_flag(hdev, + INTEL_ROM_LEGACY_NO_WBS_SUPPORT)) + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, + &hdev->quirks); + if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22) + set_bit(HCI_QUIRK_VALID_LE_STATES, + &hdev->quirks); + + err = btintel_legacy_rom_setup(hdev, &ver); + break; + case 0x0b: /* SfP */ + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); + fallthrough; + case 0x0c: /* WsP */ + /* Apply the device specific HCI quirks + * + * All Legacy bootloader devices support WBS + */ + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, + &hdev->quirks); + + /* Setup MSFT Extension support */ + btintel_set_msft_opcode(hdev, ver.hw_variant); + + err = btintel_bootloader_setup(hdev, &ver); + break; + default: + bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", + ver.hw_variant); + err = -EINVAL; + } + + goto exit_error; + } + + /* memset ver_tlv to start with clean state as few fields are exclusive + * to bootloader mode and are not populated in operational mode + */ + memset(&ver_tlv, 0, sizeof(ver_tlv)); + /* For TLV type device, parse the tlv data */ + err = btintel_parse_version_tlv(hdev, &ver_tlv, skb); + if (err) { + bt_dev_err(hdev, "Failed to parse TLV version information"); + goto exit_error; + } + + if (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt) != 0x37) { + bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)", + INTEL_HW_PLATFORM(ver_tlv.cnvi_bt)); + err = -EINVAL; + goto exit_error; + } + + /* Check for supported iBT hardware variants of this firmware + * loading method. + * + * This check has been put in place to ensure correct forward + * compatibility options when newer hardware variants come + * along. + */ + switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) { + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + /* Some legacy bootloader devices starting from JfP, + * the operational firmware supports both old and TLV based + * HCI_Intel_Read_Version command based on the command + * parameter. + * + * For upgrading firmware case, the TLV based version cannot + * be used because the firmware filename for legacy bootloader + * is based on the old format. + * + * Also, it is not easy to convert TLV based version from the + * legacy version format. + * + * So, as a workaround for those devices, use the legacy + * HCI_Intel_Read_Version to get the version information and + * run the legacy bootloader setup. + */ + err = btintel_read_version(hdev, &ver); + if (err) + break; + + /* Apply the device specific HCI quirks + * + * All Legacy bootloader devices support WBS + */ + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); + + /* Set Valid LE States quirk */ + set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); + + /* Setup MSFT Extension support */ + btintel_set_msft_opcode(hdev, ver.hw_variant); + + err = btintel_bootloader_setup(hdev, &ver); + break; + case 0x17: + case 0x18: + case 0x19: + case 0x1b: + /* Display version information of TLV type */ + btintel_version_info_tlv(hdev, &ver_tlv); + + /* Apply the device specific HCI quirks for TLV based devices + * + * All TLV based devices support WBS + */ + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); + + /* Apply LE States quirk from solar onwards */ + set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); + + /* Setup MSFT Extension support */ + btintel_set_msft_opcode(hdev, + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); + + err = btintel_bootloader_setup_tlv(hdev, &ver_tlv); + break; + default: + bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); + err = -EINVAL; + break; + } + +exit_error: + kfree_skb(skb); + + return err; +} + +static int btintel_shutdown_combined(struct hci_dev *hdev) +{ + struct sk_buff *skb; + int ret; + + /* Send HCI Reset to the controller to stop any BT activity which + * were triggered. This will help to save power and maintain the + * sync b/w Host and controller + */ + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "HCI reset during shutdown failed"); + return PTR_ERR(skb); + } + kfree_skb(skb); + + + /* Some platforms have an issue with BT LED when the interface is + * down or BT radio is turned off, which takes 5 seconds to BT LED + * goes off. As a workaround, sends HCI_Intel_SW_RFKILL to put the + * device in the RFKILL ON state which turns off the BT LED immediately. + */ + if (btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) { + skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + bt_dev_err(hdev, "turning off Intel device LED failed"); + return ret; + } + kfree_skb(skb); + } + + return 0; +} + +int btintel_configure_setup(struct hci_dev *hdev) +{ + hdev->manufacturer = 2; + hdev->setup = btintel_setup_combined; + hdev->shutdown = btintel_shutdown_combined; + hdev->hw_error = btintel_hw_error; + hdev->set_diag = btintel_set_diag_combined; + hdev->set_bdaddr = btintel_set_bdaddr; + + return 0; +} +EXPORT_SYMBOL_GPL(btintel_configure_setup); + +void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len) +{ + const struct intel_bootup *evt = ptr; + + if (len != sizeof(*evt)) + return; + + if (btintel_test_and_clear_flag(hdev, INTEL_BOOTING)) + btintel_wake_up_flag(hdev, INTEL_BOOTING); +} +EXPORT_SYMBOL_GPL(btintel_bootup); + +void btintel_secure_send_result(struct hci_dev *hdev, + const void *ptr, unsigned int len) +{ + const struct intel_secure_send_result *evt = ptr; + + if (len != sizeof(*evt)) + return; + + if (evt->result) + btintel_set_flag(hdev, INTEL_FIRMWARE_FAILED); + + if (btintel_test_and_clear_flag(hdev, INTEL_DOWNLOADING) && + btintel_test_flag(hdev, INTEL_FIRMWARE_LOADED)) + btintel_wake_up_flag(hdev, INTEL_DOWNLOADING); +} +EXPORT_SYMBOL_GPL(btintel_secure_send_result); + +MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); +MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("intel/ibt-11-5.sfi"); +MODULE_FIRMWARE("intel/ibt-11-5.ddc"); +MODULE_FIRMWARE("intel/ibt-12-16.sfi"); +MODULE_FIRMWARE("intel/ibt-12-16.ddc"); |