summaryrefslogtreecommitdiffstats
path: root/drivers/bus/mhi/host/pci_generic.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bus/mhi/host/pci_generic.c')
-rw-r--r--drivers/bus/mhi/host/pci_generic.c1226
1 files changed, 1226 insertions, 0 deletions
diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
new file mode 100644
index 000000000..caa4ce28c
--- /dev/null
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -0,0 +1,1226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MHI PCI driver - MHI over PCI controller driver
+ *
+ * This module is a generic driver for registering MHI-over-PCI devices,
+ * such as PCIe QCOM modems.
+ *
+ * Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org>
+ */
+
+#include <linux/aer.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mhi.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+
+#define MHI_PCI_DEFAULT_BAR_NUM 0
+
+#define MHI_POST_RESET_DELAY_MS 2000
+
+#define HEALTH_CHECK_PERIOD (HZ * 2)
+
+/**
+ * struct mhi_pci_dev_info - MHI PCI device specific information
+ * @config: MHI controller configuration
+ * @name: name of the PCI module
+ * @fw: firmware path (if any)
+ * @edl: emergency download mode firmware path (if any)
+ * @bar_num: PCI base address register to use for MHI MMIO register space
+ * @dma_data_width: DMA transfer word size (32 or 64 bits)
+ * @mru_default: default MRU size for MBIM network packets
+ * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
+ * of inband wake support (such as sdx24)
+ */
+struct mhi_pci_dev_info {
+ const struct mhi_controller_config *config;
+ const char *name;
+ const char *fw;
+ const char *edl;
+ unsigned int bar_num;
+ unsigned int dma_data_width;
+ unsigned int mru_default;
+ bool sideband_wake;
+};
+
+#define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_TO_DEVICE, \
+ .ee_mask = BIT(MHI_EE_AMSS), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ } \
+
+#define MHI_CHANNEL_CONFIG_DL(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_FROM_DEVICE, \
+ .ee_mask = BIT(MHI_EE_AMSS), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ }
+
+#define MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_FROM_DEVICE, \
+ .ee_mask = BIT(MHI_EE_AMSS), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ .auto_queue = true, \
+ }
+
+#define MHI_EVENT_CONFIG_CTRL(ev_ring, el_count) \
+ { \
+ .num_elements = el_count, \
+ .irq_moderation_ms = 0, \
+ .irq = (ev_ring) + 1, \
+ .priority = 1, \
+ .mode = MHI_DB_BRST_DISABLE, \
+ .data_type = MHI_ER_CTRL, \
+ .hardware_event = false, \
+ .client_managed = false, \
+ .offload_channel = false, \
+ }
+
+#define MHI_CHANNEL_CONFIG_HW_UL(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_TO_DEVICE, \
+ .ee_mask = BIT(MHI_EE_AMSS), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_ENABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = true, \
+ } \
+
+#define MHI_CHANNEL_CONFIG_HW_DL(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_FROM_DEVICE, \
+ .ee_mask = BIT(MHI_EE_AMSS), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_ENABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = true, \
+ }
+
+#define MHI_CHANNEL_CONFIG_UL_SBL(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_TO_DEVICE, \
+ .ee_mask = BIT(MHI_EE_SBL), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ } \
+
+#define MHI_CHANNEL_CONFIG_DL_SBL(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_FROM_DEVICE, \
+ .ee_mask = BIT(MHI_EE_SBL), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ }
+
+#define MHI_CHANNEL_CONFIG_UL_FP(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_TO_DEVICE, \
+ .ee_mask = BIT(MHI_EE_FP), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ } \
+
+#define MHI_CHANNEL_CONFIG_DL_FP(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_FROM_DEVICE, \
+ .ee_mask = BIT(MHI_EE_FP), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ }
+
+#define MHI_EVENT_CONFIG_DATA(ev_ring, el_count) \
+ { \
+ .num_elements = el_count, \
+ .irq_moderation_ms = 5, \
+ .irq = (ev_ring) + 1, \
+ .priority = 1, \
+ .mode = MHI_DB_BRST_DISABLE, \
+ .data_type = MHI_ER_DATA, \
+ .hardware_event = false, \
+ .client_managed = false, \
+ .offload_channel = false, \
+ }
+
+#define MHI_EVENT_CONFIG_HW_DATA(ev_ring, el_count, ch_num) \
+ { \
+ .num_elements = el_count, \
+ .irq_moderation_ms = 1, \
+ .irq = (ev_ring) + 1, \
+ .priority = 1, \
+ .mode = MHI_DB_BRST_DISABLE, \
+ .data_type = MHI_ER_DATA, \
+ .hardware_event = true, \
+ .client_managed = false, \
+ .offload_channel = false, \
+ .channel = ch_num, \
+ }
+
+static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
+ MHI_CHANNEL_CONFIG_UL(4, "DIAG", 16, 1),
+ MHI_CHANNEL_CONFIG_DL(5, "DIAG", 16, 1),
+ MHI_CHANNEL_CONFIG_UL(12, "MBIM", 4, 0),
+ MHI_CHANNEL_CONFIG_DL(13, "MBIM", 4, 0),
+ MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0),
+ MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0),
+ MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0),
+ MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0),
+ MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
+ MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
+ MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
+ MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3),
+};
+
+static struct mhi_event_config modem_qcom_v1_mhi_events[] = {
+ /* first ring is control+data ring */
+ MHI_EVENT_CONFIG_CTRL(0, 64),
+ /* DIAG dedicated event ring */
+ MHI_EVENT_CONFIG_DATA(1, 128),
+ /* Hardware channels request dedicated hardware event rings */
+ MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
+ MHI_EVENT_CONFIG_HW_DATA(3, 2048, 101)
+};
+
+static const struct mhi_controller_config modem_qcom_v1_mhiv_config = {
+ .max_channels = 128,
+ .timeout_ms = 8000,
+ .num_channels = ARRAY_SIZE(modem_qcom_v1_mhi_channels),
+ .ch_cfg = modem_qcom_v1_mhi_channels,
+ .num_events = ARRAY_SIZE(modem_qcom_v1_mhi_events),
+ .event_cfg = modem_qcom_v1_mhi_events,
+};
+
+static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = {
+ .name = "qcom-sdx65m",
+ .fw = "qcom/sdx65m/xbl.elf",
+ .edl = "qcom/sdx65m/edl.mbn",
+ .config = &modem_qcom_v1_mhiv_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .sideband_wake = false,
+};
+
+static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
+ .name = "qcom-sdx55m",
+ .fw = "qcom/sdx55m/sbl1.mbn",
+ .edl = "qcom/sdx55m/edl.mbn",
+ .config = &modem_qcom_v1_mhiv_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .mru_default = 32768,
+ .sideband_wake = false,
+};
+
+static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
+ .name = "qcom-sdx24",
+ .edl = "qcom/prog_firehose_sdx24.mbn",
+ .config = &modem_qcom_v1_mhiv_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .sideband_wake = true,
+};
+
+static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = {
+ MHI_CHANNEL_CONFIG_UL(0, "NMEA", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(1, "NMEA", 32, 0),
+ MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
+ MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1),
+ MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1),
+ MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
+ /* The EDL firmware is a flash-programmer exposing firehose protocol */
+ MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
+ MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
+ MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
+ MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
+};
+
+static struct mhi_event_config mhi_quectel_em1xx_events[] = {
+ MHI_EVENT_CONFIG_CTRL(0, 128),
+ MHI_EVENT_CONFIG_DATA(1, 128),
+ MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
+ MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101)
+};
+
+static const struct mhi_controller_config modem_quectel_em1xx_config = {
+ .max_channels = 128,
+ .timeout_ms = 20000,
+ .num_channels = ARRAY_SIZE(mhi_quectel_em1xx_channels),
+ .ch_cfg = mhi_quectel_em1xx_channels,
+ .num_events = ARRAY_SIZE(mhi_quectel_em1xx_events),
+ .event_cfg = mhi_quectel_em1xx_events,
+};
+
+static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = {
+ .name = "quectel-em1xx",
+ .edl = "qcom/prog_firehose_sdx24.mbn",
+ .config = &modem_quectel_em1xx_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .mru_default = 32768,
+ .sideband_wake = true,
+};
+
+static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
+ MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1),
+ MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1),
+ MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
+ MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
+ MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
+};
+
+static struct mhi_event_config mhi_foxconn_sdx55_events[] = {
+ MHI_EVENT_CONFIG_CTRL(0, 128),
+ MHI_EVENT_CONFIG_DATA(1, 128),
+ MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
+ MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101)
+};
+
+static const struct mhi_controller_config modem_foxconn_sdx55_config = {
+ .max_channels = 128,
+ .timeout_ms = 20000,
+ .num_channels = ARRAY_SIZE(mhi_foxconn_sdx55_channels),
+ .ch_cfg = mhi_foxconn_sdx55_channels,
+ .num_events = ARRAY_SIZE(mhi_foxconn_sdx55_events),
+ .event_cfg = mhi_foxconn_sdx55_events,
+};
+
+static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
+ .name = "foxconn-sdx55",
+ .fw = "qcom/sdx55m/sbl1.mbn",
+ .edl = "qcom/sdx55m/edl.mbn",
+ .config = &modem_foxconn_sdx55_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .mru_default = 32768,
+ .sideband_wake = false,
+};
+
+static const struct mhi_pci_dev_info mhi_foxconn_sdx65_info = {
+ .name = "foxconn-sdx65",
+ .config = &modem_foxconn_sdx55_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .mru_default = 32768,
+ .sideband_wake = false,
+};
+
+static const struct mhi_channel_config mhi_mv3x_channels[] = {
+ MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 64, 0),
+ MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 64, 0),
+ /* MBIM Control Channel */
+ MHI_CHANNEL_CONFIG_UL(12, "MBIM", 64, 0),
+ MHI_CHANNEL_CONFIG_DL(13, "MBIM", 64, 0),
+ /* MBIM Data Channel */
+ MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 512, 2),
+ MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 512, 3),
+};
+
+static struct mhi_event_config mhi_mv3x_events[] = {
+ MHI_EVENT_CONFIG_CTRL(0, 256),
+ MHI_EVENT_CONFIG_DATA(1, 256),
+ MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
+ MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101),
+};
+
+static const struct mhi_controller_config modem_mv3x_config = {
+ .max_channels = 128,
+ .timeout_ms = 20000,
+ .num_channels = ARRAY_SIZE(mhi_mv3x_channels),
+ .ch_cfg = mhi_mv3x_channels,
+ .num_events = ARRAY_SIZE(mhi_mv3x_events),
+ .event_cfg = mhi_mv3x_events,
+};
+
+static const struct mhi_pci_dev_info mhi_mv31_info = {
+ .name = "cinterion-mv31",
+ .config = &modem_mv3x_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .mru_default = 32768,
+};
+
+static const struct mhi_pci_dev_info mhi_mv32_info = {
+ .name = "cinterion-mv32",
+ .config = &modem_mv3x_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .mru_default = 32768,
+};
+
+static const struct mhi_channel_config mhi_sierra_em919x_channels[] = {
+ MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
+ MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 256, 0),
+ MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(12, "MBIM", 128, 0),
+ MHI_CHANNEL_CONFIG_DL(13, "MBIM", 128, 0),
+ MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
+ MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 512, 1),
+ MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 512, 2),
+};
+
+static struct mhi_event_config modem_sierra_em919x_mhi_events[] = {
+ /* first ring is control+data and DIAG ring */
+ MHI_EVENT_CONFIG_CTRL(0, 2048),
+ /* Hardware channels request dedicated hardware event rings */
+ MHI_EVENT_CONFIG_HW_DATA(1, 2048, 100),
+ MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101)
+};
+
+static const struct mhi_controller_config modem_sierra_em919x_config = {
+ .max_channels = 128,
+ .timeout_ms = 24000,
+ .num_channels = ARRAY_SIZE(mhi_sierra_em919x_channels),
+ .ch_cfg = mhi_sierra_em919x_channels,
+ .num_events = ARRAY_SIZE(modem_sierra_em919x_mhi_events),
+ .event_cfg = modem_sierra_em919x_mhi_events,
+};
+
+static const struct mhi_pci_dev_info mhi_sierra_em919x_info = {
+ .name = "sierra-em919x",
+ .config = &modem_sierra_em919x_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .sideband_wake = false,
+};
+
+static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = {
+ MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(20, "IPCR", 16, 0),
+ MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 16, 0),
+ MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 1),
+ MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 2),
+};
+
+static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = {
+ MHI_EVENT_CONFIG_CTRL(0, 128),
+ MHI_EVENT_CONFIG_HW_DATA(1, 1024, 100),
+ MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101)
+};
+
+static struct mhi_controller_config modem_telit_fn980_hw_v1_config = {
+ .max_channels = 128,
+ .timeout_ms = 20000,
+ .num_channels = ARRAY_SIZE(mhi_telit_fn980_hw_v1_channels),
+ .ch_cfg = mhi_telit_fn980_hw_v1_channels,
+ .num_events = ARRAY_SIZE(mhi_telit_fn980_hw_v1_events),
+ .event_cfg = mhi_telit_fn980_hw_v1_events,
+};
+
+static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = {
+ .name = "telit-fn980-hwv1",
+ .fw = "qcom/sdx55m/sbl1.mbn",
+ .edl = "qcom/sdx55m/edl.mbn",
+ .config = &modem_telit_fn980_hw_v1_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .mru_default = 32768,
+ .sideband_wake = false,
+};
+
+static const struct mhi_channel_config mhi_telit_fn990_channels[] = {
+ MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
+ MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(4, "DIAG", 64, 1),
+ MHI_CHANNEL_CONFIG_DL(5, "DIAG", 64, 1),
+ MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
+ MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
+ MHI_CHANNEL_CONFIG_UL(92, "DUN2", 32, 1),
+ MHI_CHANNEL_CONFIG_DL(93, "DUN2", 32, 1),
+ MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
+ MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
+};
+
+static struct mhi_event_config mhi_telit_fn990_events[] = {
+ MHI_EVENT_CONFIG_CTRL(0, 128),
+ MHI_EVENT_CONFIG_DATA(1, 128),
+ MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
+ MHI_EVENT_CONFIG_HW_DATA(3, 2048, 101)
+};
+
+static const struct mhi_controller_config modem_telit_fn990_config = {
+ .max_channels = 128,
+ .timeout_ms = 20000,
+ .num_channels = ARRAY_SIZE(mhi_telit_fn990_channels),
+ .ch_cfg = mhi_telit_fn990_channels,
+ .num_events = ARRAY_SIZE(mhi_telit_fn990_events),
+ .event_cfg = mhi_telit_fn990_events,
+};
+
+static const struct mhi_pci_dev_info mhi_telit_fn990_info = {
+ .name = "telit-fn990",
+ .config = &modem_telit_fn990_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .sideband_wake = false,
+ .mru_default = 32768,
+};
+
+/* Keep the list sorted based on the PID. New VID should be added as the last entry */
+static const struct pci_device_id mhi_pci_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
+ .driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
+ /* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
+ .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
+ /* Telit FN980 hardware revision v1 */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000),
+ .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info },
+ { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
+ .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
+ /* Telit FN990 */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010),
+ .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info },
+ { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
+ .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
+ { PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */
+ .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
+ { PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
+ .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
+ { PCI_DEVICE(0x1eac, 0x2001), /* EM120R-GL for FCCL (sdx24) */
+ .driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
+ /* T99W175 (sdx55), Both for eSIM and Non-eSIM */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
+ /* DW5930e (sdx55), With eSIM, It's also T99W175 */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b0),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
+ /* DW5930e (sdx55), Non-eSIM, It's also T99W175 */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b1),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
+ /* T99W175 (sdx55), Based on Qualcomm new baseline */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0bf),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
+ /* T99W175 (sdx55) */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0c3),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
+ /* T99W368 (sdx65) */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d8),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
+ /* T99W373 (sdx62) */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
+ /* MV31-W (Cinterion) */
+ { PCI_DEVICE(0x1269, 0x00b3),
+ .driver_data = (kernel_ulong_t) &mhi_mv31_info },
+ /* MV31-W (Cinterion), based on new baseline */
+ { PCI_DEVICE(0x1269, 0x00b4),
+ .driver_data = (kernel_ulong_t) &mhi_mv31_info },
+ /* MV32-WA (Cinterion) */
+ { PCI_DEVICE(0x1269, 0x00ba),
+ .driver_data = (kernel_ulong_t) &mhi_mv32_info },
+ /* MV32-WB (Cinterion) */
+ { PCI_DEVICE(0x1269, 0x00bb),
+ .driver_data = (kernel_ulong_t) &mhi_mv32_info },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
+
+enum mhi_pci_device_status {
+ MHI_PCI_DEV_STARTED,
+ MHI_PCI_DEV_SUSPENDED,
+};
+
+struct mhi_pci_device {
+ struct mhi_controller mhi_cntrl;
+ struct pci_saved_state *pci_state;
+ struct work_struct recovery_work;
+ struct timer_list health_check_timer;
+ unsigned long status;
+};
+
+static int mhi_pci_read_reg(struct mhi_controller *mhi_cntrl,
+ void __iomem *addr, u32 *out)
+{
+ *out = readl(addr);
+ return 0;
+}
+
+static void mhi_pci_write_reg(struct mhi_controller *mhi_cntrl,
+ void __iomem *addr, u32 val)
+{
+ writel(val, addr);
+}
+
+static void mhi_pci_status_cb(struct mhi_controller *mhi_cntrl,
+ enum mhi_callback cb)
+{
+ struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
+
+ /* Nothing to do for now */
+ switch (cb) {
+ case MHI_CB_FATAL_ERROR:
+ case MHI_CB_SYS_ERROR:
+ dev_warn(&pdev->dev, "firmware crashed (%u)\n", cb);
+ pm_runtime_forbid(&pdev->dev);
+ break;
+ case MHI_CB_EE_MISSION_MODE:
+ pm_runtime_allow(&pdev->dev);
+ break;
+ default:
+ break;
+ }
+}
+
+static void mhi_pci_wake_get_nop(struct mhi_controller *mhi_cntrl, bool force)
+{
+ /* no-op */
+}
+
+static void mhi_pci_wake_put_nop(struct mhi_controller *mhi_cntrl, bool override)
+{
+ /* no-op */
+}
+
+static void mhi_pci_wake_toggle_nop(struct mhi_controller *mhi_cntrl)
+{
+ /* no-op */
+}
+
+static bool mhi_pci_is_alive(struct mhi_controller *mhi_cntrl)
+{
+ struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
+ u16 vendor = 0;
+
+ if (pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor))
+ return false;
+
+ if (vendor == (u16) ~0 || vendor == 0)
+ return false;
+
+ return true;
+}
+
+static int mhi_pci_claim(struct mhi_controller *mhi_cntrl,
+ unsigned int bar_num, u64 dma_mask)
+{
+ struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
+ int err;
+
+ err = pci_assign_resource(pdev, bar_num);
+ if (err)
+ return err;
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable pci device: %d\n", err);
+ return err;
+ }
+
+ err = pcim_iomap_regions(pdev, 1 << bar_num, pci_name(pdev));
+ if (err) {
+ dev_err(&pdev->dev, "failed to map pci region: %d\n", err);
+ return err;
+ }
+ mhi_cntrl->regs = pcim_iomap_table(pdev)[bar_num];
+ mhi_cntrl->reg_len = pci_resource_len(pdev, bar_num);
+
+ err = dma_set_mask_and_coherent(&pdev->dev, dma_mask);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot set proper DMA mask\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+
+ return 0;
+}
+
+static int mhi_pci_get_irqs(struct mhi_controller *mhi_cntrl,
+ const struct mhi_controller_config *mhi_cntrl_config)
+{
+ struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
+ int nr_vectors, i;
+ int *irq;
+
+ /*
+ * Alloc one MSI vector for BHI + one vector per event ring, ideally...
+ * No explicit pci_free_irq_vectors required, done by pcim_release.
+ */
+ mhi_cntrl->nr_irqs = 1 + mhi_cntrl_config->num_events;
+
+ nr_vectors = pci_alloc_irq_vectors(pdev, 1, mhi_cntrl->nr_irqs, PCI_IRQ_MSI);
+ if (nr_vectors < 0) {
+ dev_err(&pdev->dev, "Error allocating MSI vectors %d\n",
+ nr_vectors);
+ return nr_vectors;
+ }
+
+ if (nr_vectors < mhi_cntrl->nr_irqs) {
+ dev_warn(&pdev->dev, "using shared MSI\n");
+
+ /* Patch msi vectors, use only one (shared) */
+ for (i = 0; i < mhi_cntrl_config->num_events; i++)
+ mhi_cntrl_config->event_cfg[i].irq = 0;
+ mhi_cntrl->nr_irqs = 1;
+ }
+
+ irq = devm_kcalloc(&pdev->dev, mhi_cntrl->nr_irqs, sizeof(int), GFP_KERNEL);
+ if (!irq)
+ return -ENOMEM;
+
+ for (i = 0; i < mhi_cntrl->nr_irqs; i++) {
+ int vector = i >= nr_vectors ? (nr_vectors - 1) : i;
+
+ irq[i] = pci_irq_vector(pdev, vector);
+ }
+
+ mhi_cntrl->irq = irq;
+
+ return 0;
+}
+
+static int mhi_pci_runtime_get(struct mhi_controller *mhi_cntrl)
+{
+ /* The runtime_get() MHI callback means:
+ * Do whatever is requested to leave M3.
+ */
+ return pm_runtime_get(mhi_cntrl->cntrl_dev);
+}
+
+static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl)
+{
+ /* The runtime_put() MHI callback means:
+ * Device can be moved in M3 state.
+ */
+ pm_runtime_mark_last_busy(mhi_cntrl->cntrl_dev);
+ pm_runtime_put(mhi_cntrl->cntrl_dev);
+}
+
+static void mhi_pci_recovery_work(struct work_struct *work)
+{
+ struct mhi_pci_device *mhi_pdev = container_of(work, struct mhi_pci_device,
+ recovery_work);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+ struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
+ int err;
+
+ dev_warn(&pdev->dev, "device recovery started\n");
+
+ del_timer(&mhi_pdev->health_check_timer);
+ pm_runtime_forbid(&pdev->dev);
+
+ /* Clean up MHI state */
+ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+ mhi_power_down(mhi_cntrl, false);
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ }
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_load_saved_state(pdev, mhi_pdev->pci_state);
+ pci_restore_state(pdev);
+
+ if (!mhi_pci_is_alive(mhi_cntrl))
+ goto err_try_reset;
+
+ err = mhi_prepare_for_power_up(mhi_cntrl);
+ if (err)
+ goto err_try_reset;
+
+ err = mhi_sync_power_up(mhi_cntrl);
+ if (err)
+ goto err_unprepare;
+
+ dev_dbg(&pdev->dev, "Recovery completed\n");
+
+ set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
+ mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
+ return;
+
+err_unprepare:
+ mhi_unprepare_after_power_down(mhi_cntrl);
+err_try_reset:
+ if (pci_reset_function(pdev))
+ dev_err(&pdev->dev, "Recovery failed\n");
+}
+
+static void health_check(struct timer_list *t)
+{
+ struct mhi_pci_device *mhi_pdev = from_timer(mhi_pdev, t, health_check_timer);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+ if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) ||
+ test_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status))
+ return;
+
+ if (!mhi_pci_is_alive(mhi_cntrl)) {
+ dev_err(mhi_cntrl->cntrl_dev, "Device died\n");
+ queue_work(system_long_wq, &mhi_pdev->recovery_work);
+ return;
+ }
+
+ /* reschedule in two seconds */
+ mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
+}
+
+static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;
+ const struct mhi_controller_config *mhi_cntrl_config;
+ struct mhi_pci_device *mhi_pdev;
+ struct mhi_controller *mhi_cntrl;
+ int err;
+
+ dev_info(&pdev->dev, "MHI PCI device found: %s\n", info->name);
+
+ /* mhi_pdev.mhi_cntrl must be zero-initialized */
+ mhi_pdev = devm_kzalloc(&pdev->dev, sizeof(*mhi_pdev), GFP_KERNEL);
+ if (!mhi_pdev)
+ return -ENOMEM;
+
+ INIT_WORK(&mhi_pdev->recovery_work, mhi_pci_recovery_work);
+ timer_setup(&mhi_pdev->health_check_timer, health_check, 0);
+
+ mhi_cntrl_config = info->config;
+ mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+ mhi_cntrl->cntrl_dev = &pdev->dev;
+ mhi_cntrl->iova_start = 0;
+ mhi_cntrl->iova_stop = (dma_addr_t)DMA_BIT_MASK(info->dma_data_width);
+ mhi_cntrl->fw_image = info->fw;
+ mhi_cntrl->edl_image = info->edl;
+
+ mhi_cntrl->read_reg = mhi_pci_read_reg;
+ mhi_cntrl->write_reg = mhi_pci_write_reg;
+ mhi_cntrl->status_cb = mhi_pci_status_cb;
+ mhi_cntrl->runtime_get = mhi_pci_runtime_get;
+ mhi_cntrl->runtime_put = mhi_pci_runtime_put;
+ mhi_cntrl->mru = info->mru_default;
+
+ if (info->sideband_wake) {
+ mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
+ mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
+ mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
+ }
+
+ err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
+ if (err)
+ return err;
+
+ err = mhi_pci_get_irqs(mhi_cntrl, mhi_cntrl_config);
+ if (err)
+ return err;
+
+ pci_set_drvdata(pdev, mhi_pdev);
+
+ /* Have stored pci confspace at hand for restore in sudden PCI error.
+ * cache the state locally and discard the PCI core one.
+ */
+ pci_save_state(pdev);
+ mhi_pdev->pci_state = pci_store_saved_state(pdev);
+ pci_load_saved_state(pdev, NULL);
+
+ pci_enable_pcie_error_reporting(pdev);
+
+ err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config);
+ if (err)
+ goto err_disable_reporting;
+
+ /* MHI bus does not power up the controller by default */
+ err = mhi_prepare_for_power_up(mhi_cntrl);
+ if (err) {
+ dev_err(&pdev->dev, "failed to prepare MHI controller\n");
+ goto err_unregister;
+ }
+
+ err = mhi_sync_power_up(mhi_cntrl);
+ if (err) {
+ dev_err(&pdev->dev, "failed to power up MHI controller\n");
+ goto err_unprepare;
+ }
+
+ set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
+
+ /* start health check */
+ mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
+
+ /* Only allow runtime-suspend if PME capable (for wakeup) */
+ if (pci_pme_capable(pdev, PCI_D3hot)) {
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+ }
+
+ return 0;
+
+err_unprepare:
+ mhi_unprepare_after_power_down(mhi_cntrl);
+err_unregister:
+ mhi_unregister_controller(mhi_cntrl);
+err_disable_reporting:
+ pci_disable_pcie_error_reporting(pdev);
+
+ return err;
+}
+
+static void mhi_pci_remove(struct pci_dev *pdev)
+{
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+ del_timer_sync(&mhi_pdev->health_check_timer);
+ cancel_work_sync(&mhi_pdev->recovery_work);
+
+ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+ mhi_power_down(mhi_cntrl, true);
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ }
+
+ /* balancing probe put_noidle */
+ if (pci_pme_capable(pdev, PCI_D3hot))
+ pm_runtime_get_noresume(&pdev->dev);
+
+ mhi_unregister_controller(mhi_cntrl);
+ pci_disable_pcie_error_reporting(pdev);
+}
+
+static void mhi_pci_shutdown(struct pci_dev *pdev)
+{
+ mhi_pci_remove(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+}
+
+static void mhi_pci_reset_prepare(struct pci_dev *pdev)
+{
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+ dev_info(&pdev->dev, "reset\n");
+
+ del_timer(&mhi_pdev->health_check_timer);
+
+ /* Clean up MHI state */
+ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+ mhi_power_down(mhi_cntrl, false);
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ }
+
+ /* cause internal device reset */
+ mhi_soc_reset(mhi_cntrl);
+
+ /* Be sure device reset has been executed */
+ msleep(MHI_POST_RESET_DELAY_MS);
+}
+
+static void mhi_pci_reset_done(struct pci_dev *pdev)
+{
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+ int err;
+
+ /* Restore initial known working PCI state */
+ pci_load_saved_state(pdev, mhi_pdev->pci_state);
+ pci_restore_state(pdev);
+
+ /* Is device status available ? */
+ if (!mhi_pci_is_alive(mhi_cntrl)) {
+ dev_err(&pdev->dev, "reset failed\n");
+ return;
+ }
+
+ err = mhi_prepare_for_power_up(mhi_cntrl);
+ if (err) {
+ dev_err(&pdev->dev, "failed to prepare MHI controller\n");
+ return;
+ }
+
+ err = mhi_sync_power_up(mhi_cntrl);
+ if (err) {
+ dev_err(&pdev->dev, "failed to power up MHI controller\n");
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ return;
+ }
+
+ set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
+ mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
+}
+
+static pci_ers_result_t mhi_pci_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+ dev_err(&pdev->dev, "PCI error detected, state = %u\n", state);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ /* Clean up MHI state */
+ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+ mhi_power_down(mhi_cntrl, false);
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ } else {
+ /* Nothing to do */
+ return PCI_ERS_RESULT_RECOVERED;
+ }
+
+ pci_disable_device(pdev);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t mhi_pci_slot_reset(struct pci_dev *pdev)
+{
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void mhi_pci_io_resume(struct pci_dev *pdev)
+{
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+
+ dev_err(&pdev->dev, "PCI slot reset done\n");
+
+ queue_work(system_long_wq, &mhi_pdev->recovery_work);
+}
+
+static const struct pci_error_handlers mhi_pci_err_handler = {
+ .error_detected = mhi_pci_error_detected,
+ .slot_reset = mhi_pci_slot_reset,
+ .resume = mhi_pci_io_resume,
+ .reset_prepare = mhi_pci_reset_prepare,
+ .reset_done = mhi_pci_reset_done,
+};
+
+static int __maybe_unused mhi_pci_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+ int err;
+
+ if (test_and_set_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status))
+ return 0;
+
+ del_timer(&mhi_pdev->health_check_timer);
+ cancel_work_sync(&mhi_pdev->recovery_work);
+
+ if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) ||
+ mhi_cntrl->ee != MHI_EE_AMSS)
+ goto pci_suspend; /* Nothing to do at MHI level */
+
+ /* Transition to M3 state */
+ err = mhi_pm_suspend(mhi_cntrl);
+ if (err) {
+ dev_err(&pdev->dev, "failed to suspend device: %d\n", err);
+ clear_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status);
+ return -EBUSY;
+ }
+
+pci_suspend:
+ pci_disable_device(pdev);
+ pci_wake_from_d3(pdev, true);
+
+ return 0;
+}
+
+static int __maybe_unused mhi_pci_runtime_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+ int err;
+
+ if (!test_and_clear_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status))
+ return 0;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ goto err_recovery;
+
+ pci_set_master(pdev);
+ pci_wake_from_d3(pdev, false);
+
+ if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) ||
+ mhi_cntrl->ee != MHI_EE_AMSS)
+ return 0; /* Nothing to do at MHI level */
+
+ /* Exit M3, transition to M0 state */
+ err = mhi_pm_resume(mhi_cntrl);
+ if (err) {
+ dev_err(&pdev->dev, "failed to resume device: %d\n", err);
+ goto err_recovery;
+ }
+
+ /* Resume health check */
+ mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
+
+ /* It can be a remote wakeup (no mhi runtime_get), update access time */
+ pm_runtime_mark_last_busy(dev);
+
+ return 0;
+
+err_recovery:
+ /* Do not fail to not mess up our PCI device state, the device likely
+ * lost power (d3cold) and we simply need to reset it from the recovery
+ * procedure, trigger the recovery asynchronously to prevent system
+ * suspend exit delaying.
+ */
+ queue_work(system_long_wq, &mhi_pdev->recovery_work);
+ pm_runtime_mark_last_busy(dev);
+
+ return 0;
+}
+
+static int __maybe_unused mhi_pci_suspend(struct device *dev)
+{
+ pm_runtime_disable(dev);
+ return mhi_pci_runtime_suspend(dev);
+}
+
+static int __maybe_unused mhi_pci_resume(struct device *dev)
+{
+ int ret;
+
+ /* Depending the platform, device may have lost power (d3cold), we need
+ * to resume it now to check its state and recover when necessary.
+ */
+ ret = mhi_pci_runtime_resume(dev);
+ pm_runtime_enable(dev);
+
+ return ret;
+}
+
+static int __maybe_unused mhi_pci_freeze(struct device *dev)
+{
+ struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+ /* We want to stop all operations, hibernation does not guarantee that
+ * device will be in the same state as before freezing, especially if
+ * the intermediate restore kernel reinitializes MHI device with new
+ * context.
+ */
+ flush_work(&mhi_pdev->recovery_work);
+ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+ mhi_power_down(mhi_cntrl, true);
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ }
+
+ return 0;
+}
+
+static int __maybe_unused mhi_pci_restore(struct device *dev)
+{
+ struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
+
+ /* Reinitialize the device */
+ queue_work(system_long_wq, &mhi_pdev->recovery_work);
+
+ return 0;
+}
+
+static const struct dev_pm_ops mhi_pci_pm_ops = {
+ SET_RUNTIME_PM_OPS(mhi_pci_runtime_suspend, mhi_pci_runtime_resume, NULL)
+#ifdef CONFIG_PM_SLEEP
+ .suspend = mhi_pci_suspend,
+ .resume = mhi_pci_resume,
+ .freeze = mhi_pci_freeze,
+ .thaw = mhi_pci_restore,
+ .poweroff = mhi_pci_freeze,
+ .restore = mhi_pci_restore,
+#endif
+};
+
+static struct pci_driver mhi_pci_driver = {
+ .name = "mhi-pci-generic",
+ .id_table = mhi_pci_id_table,
+ .probe = mhi_pci_probe,
+ .remove = mhi_pci_remove,
+ .shutdown = mhi_pci_shutdown,
+ .err_handler = &mhi_pci_err_handler,
+ .driver.pm = &mhi_pci_pm_ops
+};
+module_pci_driver(mhi_pci_driver);
+
+MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>");
+MODULE_DESCRIPTION("Modem Host Interface (MHI) PCI controller driver");
+MODULE_LICENSE("GPL");