summaryrefslogtreecommitdiffstats
path: root/drivers/char/ipmi/ipmi_poweroff.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/ipmi/ipmi_poweroff.c')
-rw-r--r--drivers/char/ipmi/ipmi_poweroff.c738
1 files changed, 738 insertions, 0 deletions
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c
new file mode 100644
index 000000000..163ec9749
--- /dev/null
+++ b/drivers/char/ipmi/ipmi_poweroff.c
@@ -0,0 +1,738 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ipmi_poweroff.c
+ *
+ * MontaVista IPMI Poweroff extension to sys_reboot
+ *
+ * Author: MontaVista Software, Inc.
+ * Steven Dake <sdake@mvista.com>
+ * Corey Minyard <cminyard@mvista.com>
+ * source@mvista.com
+ *
+ * Copyright 2002,2004 MontaVista Software Inc.
+ */
+
+#define pr_fmt(fmt) "IPMI poweroff: " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/completion.h>
+#include <linux/pm.h>
+#include <linux/kdev_t.h>
+#include <linux/ipmi.h>
+#include <linux/ipmi_smi.h>
+
+static void ipmi_po_smi_gone(int if_num);
+static void ipmi_po_new_smi(int if_num, struct device *device);
+
+/* Definitions for controlling power off (if the system supports it). It
+ * conveniently matches the IPMI chassis control values. */
+#define IPMI_CHASSIS_POWER_DOWN 0 /* power down, the default. */
+#define IPMI_CHASSIS_POWER_CYCLE 0x02 /* power cycle */
+
+/* the IPMI data command */
+static int poweroff_powercycle;
+
+/* Which interface to use, -1 means the first we see. */
+static int ifnum_to_use = -1;
+
+/* Our local state. */
+static int ready;
+static struct ipmi_user *ipmi_user;
+static int ipmi_ifnum;
+static void (*specific_poweroff_func)(struct ipmi_user *user);
+
+/* Holds the old poweroff function so we can restore it on removal. */
+static void (*old_poweroff_func)(void);
+
+static int set_param_ifnum(const char *val, const struct kernel_param *kp)
+{
+ int rv = param_set_int(val, kp);
+ if (rv)
+ return rv;
+ if ((ifnum_to_use < 0) || (ifnum_to_use == ipmi_ifnum))
+ return 0;
+
+ ipmi_po_smi_gone(ipmi_ifnum);
+ ipmi_po_new_smi(ifnum_to_use, NULL);
+ return 0;
+}
+
+module_param_call(ifnum_to_use, set_param_ifnum, param_get_int,
+ &ifnum_to_use, 0644);
+MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog "
+ "timer. Setting to -1 defaults to the first registered "
+ "interface");
+
+/* parameter definition to allow user to flag power cycle */
+module_param(poweroff_powercycle, int, 0644);
+MODULE_PARM_DESC(poweroff_powercycle,
+ " Set to non-zero to enable power cycle instead of power"
+ " down. Power cycle is contingent on hardware support,"
+ " otherwise it defaults back to power down.");
+
+/* Stuff from the get device id command. */
+static unsigned int mfg_id;
+static unsigned int prod_id;
+static unsigned char capabilities;
+static unsigned char ipmi_version;
+
+/*
+ * We use our own messages for this operation, we don't let the system
+ * allocate them, since we may be in a panic situation. The whole
+ * thing is single-threaded, anyway, so multiple messages are not
+ * required.
+ */
+static atomic_t dummy_count = ATOMIC_INIT(0);
+static void dummy_smi_free(struct ipmi_smi_msg *msg)
+{
+ atomic_dec(&dummy_count);
+}
+static void dummy_recv_free(struct ipmi_recv_msg *msg)
+{
+ atomic_dec(&dummy_count);
+}
+static struct ipmi_smi_msg halt_smi_msg = INIT_IPMI_SMI_MSG(dummy_smi_free);
+static struct ipmi_recv_msg halt_recv_msg = INIT_IPMI_RECV_MSG(dummy_recv_free);
+
+
+/*
+ * Code to send a message and wait for the response.
+ */
+
+static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data)
+{
+ struct completion *comp = recv_msg->user_msg_data;
+
+ if (comp)
+ complete(comp);
+}
+
+static const struct ipmi_user_hndl ipmi_poweroff_handler = {
+ .ipmi_recv_hndl = receive_handler
+};
+
+
+static int ipmi_request_wait_for_response(struct ipmi_user *user,
+ struct ipmi_addr *addr,
+ struct kernel_ipmi_msg *send_msg)
+{
+ int rv;
+ struct completion comp;
+
+ init_completion(&comp);
+
+ rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &comp,
+ &halt_smi_msg, &halt_recv_msg, 0);
+ if (rv)
+ return rv;
+
+ wait_for_completion(&comp);
+
+ return halt_recv_msg.msg.data[0];
+}
+
+/* Wait for message to complete, spinning. */
+static int ipmi_request_in_rc_mode(struct ipmi_user *user,
+ struct ipmi_addr *addr,
+ struct kernel_ipmi_msg *send_msg)
+{
+ int rv;
+
+ atomic_set(&dummy_count, 2);
+ rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL,
+ &halt_smi_msg, &halt_recv_msg, 0);
+ if (rv) {
+ atomic_set(&dummy_count, 0);
+ return rv;
+ }
+
+ /*
+ * Spin until our message is done.
+ */
+ while (atomic_read(&dummy_count) > 0) {
+ ipmi_poll_interface(user);
+ cpu_relax();
+ }
+
+ return halt_recv_msg.msg.data[0];
+}
+
+/*
+ * ATCA Support
+ */
+
+#define IPMI_NETFN_ATCA 0x2c
+#define IPMI_ATCA_SET_POWER_CMD 0x11
+#define IPMI_ATCA_GET_ADDR_INFO_CMD 0x01
+#define IPMI_PICMG_ID 0
+
+#define IPMI_NETFN_OEM 0x2e
+#define IPMI_ATCA_PPS_GRACEFUL_RESTART 0x11
+#define IPMI_ATCA_PPS_IANA "\x00\x40\x0A"
+#define IPMI_MOTOROLA_MANUFACTURER_ID 0x0000A1
+#define IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID 0x0051
+
+static void (*atca_oem_poweroff_hook)(struct ipmi_user *user);
+
+static void pps_poweroff_atca(struct ipmi_user *user)
+{
+ struct ipmi_system_interface_addr smi_addr;
+ struct kernel_ipmi_msg send_msg;
+ int rv;
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
+
+ pr_info("PPS powerdown hook used\n");
+
+ send_msg.netfn = IPMI_NETFN_OEM;
+ send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART;
+ send_msg.data = IPMI_ATCA_PPS_IANA;
+ send_msg.data_len = 3;
+ rv = ipmi_request_in_rc_mode(user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+ if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE)
+ pr_err("Unable to send ATCA, IPMI error 0x%x\n", rv);
+
+ return;
+}
+
+static int ipmi_atca_detect(struct ipmi_user *user)
+{
+ struct ipmi_system_interface_addr smi_addr;
+ struct kernel_ipmi_msg send_msg;
+ int rv;
+ unsigned char data[1];
+
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
+
+ /*
+ * Use get address info to check and see if we are ATCA
+ */
+ send_msg.netfn = IPMI_NETFN_ATCA;
+ send_msg.cmd = IPMI_ATCA_GET_ADDR_INFO_CMD;
+ data[0] = IPMI_PICMG_ID;
+ send_msg.data = data;
+ send_msg.data_len = sizeof(data);
+ rv = ipmi_request_wait_for_response(user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+
+ pr_info("ATCA Detect mfg 0x%X prod 0x%X\n", mfg_id, prod_id);
+ if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID)
+ && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) {
+ pr_info("Installing Pigeon Point Systems Poweroff Hook\n");
+ atca_oem_poweroff_hook = pps_poweroff_atca;
+ }
+ return !rv;
+}
+
+static void ipmi_poweroff_atca(struct ipmi_user *user)
+{
+ struct ipmi_system_interface_addr smi_addr;
+ struct kernel_ipmi_msg send_msg;
+ int rv;
+ unsigned char data[4];
+
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
+
+ pr_info("Powering down via ATCA power command\n");
+
+ /*
+ * Power down
+ */
+ send_msg.netfn = IPMI_NETFN_ATCA;
+ send_msg.cmd = IPMI_ATCA_SET_POWER_CMD;
+ data[0] = IPMI_PICMG_ID;
+ data[1] = 0; /* FRU id */
+ data[2] = 0; /* Power Level */
+ data[3] = 0; /* Don't change saved presets */
+ send_msg.data = data;
+ send_msg.data_len = sizeof(data);
+ rv = ipmi_request_in_rc_mode(user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+ /*
+ * At this point, the system may be shutting down, and most
+ * serial drivers (if used) will have interrupts turned off
+ * it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE
+ * return code
+ */
+ if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
+ pr_err("Unable to send ATCA powerdown message, IPMI error 0x%x\n",
+ rv);
+ goto out;
+ }
+
+ if (atca_oem_poweroff_hook)
+ atca_oem_poweroff_hook(user);
+ out:
+ return;
+}
+
+/*
+ * CPI1 Support
+ */
+
+#define IPMI_NETFN_OEM_1 0xf8
+#define OEM_GRP_CMD_SET_RESET_STATE 0x84
+#define OEM_GRP_CMD_SET_POWER_STATE 0x82
+#define IPMI_NETFN_OEM_8 0xf8
+#define OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL 0x80
+#define OEM_GRP_CMD_GET_SLOT_GA 0xa3
+#define IPMI_NETFN_SENSOR_EVT 0x10
+#define IPMI_CMD_GET_EVENT_RECEIVER 0x01
+
+#define IPMI_CPI1_PRODUCT_ID 0x000157
+#define IPMI_CPI1_MANUFACTURER_ID 0x0108
+
+static int ipmi_cpi1_detect(struct ipmi_user *user)
+{
+ return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID)
+ && (prod_id == IPMI_CPI1_PRODUCT_ID));
+}
+
+static void ipmi_poweroff_cpi1(struct ipmi_user *user)
+{
+ struct ipmi_system_interface_addr smi_addr;
+ struct ipmi_ipmb_addr ipmb_addr;
+ struct kernel_ipmi_msg send_msg;
+ int rv;
+ unsigned char data[1];
+ int slot;
+ unsigned char hotswap_ipmb;
+ unsigned char aer_addr;
+ unsigned char aer_lun;
+
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
+
+ pr_info("Powering down via CPI1 power command\n");
+
+ /*
+ * Get IPMI ipmb address
+ */
+ send_msg.netfn = IPMI_NETFN_OEM_8 >> 2;
+ send_msg.cmd = OEM_GRP_CMD_GET_SLOT_GA;
+ send_msg.data = NULL;
+ send_msg.data_len = 0;
+ rv = ipmi_request_in_rc_mode(user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+ if (rv)
+ goto out;
+ slot = halt_recv_msg.msg.data[1];
+ hotswap_ipmb = (slot > 9) ? (0xb0 + 2 * slot) : (0xae + 2 * slot);
+
+ /*
+ * Get active event receiver
+ */
+ send_msg.netfn = IPMI_NETFN_SENSOR_EVT >> 2;
+ send_msg.cmd = IPMI_CMD_GET_EVENT_RECEIVER;
+ send_msg.data = NULL;
+ send_msg.data_len = 0;
+ rv = ipmi_request_in_rc_mode(user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+ if (rv)
+ goto out;
+ aer_addr = halt_recv_msg.msg.data[1];
+ aer_lun = halt_recv_msg.msg.data[2];
+
+ /*
+ * Setup IPMB address target instead of local target
+ */
+ ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE;
+ ipmb_addr.channel = 0;
+ ipmb_addr.slave_addr = aer_addr;
+ ipmb_addr.lun = aer_lun;
+
+ /*
+ * Send request hotswap control to remove blade from dpv
+ */
+ send_msg.netfn = IPMI_NETFN_OEM_8 >> 2;
+ send_msg.cmd = OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL;
+ send_msg.data = &hotswap_ipmb;
+ send_msg.data_len = 1;
+ ipmi_request_in_rc_mode(user,
+ (struct ipmi_addr *) &ipmb_addr,
+ &send_msg);
+
+ /*
+ * Set reset asserted
+ */
+ send_msg.netfn = IPMI_NETFN_OEM_1 >> 2;
+ send_msg.cmd = OEM_GRP_CMD_SET_RESET_STATE;
+ send_msg.data = data;
+ data[0] = 1; /* Reset asserted state */
+ send_msg.data_len = 1;
+ rv = ipmi_request_in_rc_mode(user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+ if (rv)
+ goto out;
+
+ /*
+ * Power down
+ */
+ send_msg.netfn = IPMI_NETFN_OEM_1 >> 2;
+ send_msg.cmd = OEM_GRP_CMD_SET_POWER_STATE;
+ send_msg.data = data;
+ data[0] = 1; /* Power down state */
+ send_msg.data_len = 1;
+ rv = ipmi_request_in_rc_mode(user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+ if (rv)
+ goto out;
+
+ out:
+ return;
+}
+
+/*
+ * ipmi_dell_chassis_detect()
+ * Dell systems with IPMI < 1.5 don't set the chassis capability bit
+ * but they can handle a chassis poweroff or powercycle command.
+ */
+
+#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00}
+static int ipmi_dell_chassis_detect(struct ipmi_user *user)
+{
+ const char ipmi_version_major = ipmi_version & 0xF;
+ const char ipmi_version_minor = (ipmi_version >> 4) & 0xF;
+ const char mfr[3] = DELL_IANA_MFR_ID;
+ if (!memcmp(mfr, &mfg_id, sizeof(mfr)) &&
+ ipmi_version_major <= 1 &&
+ ipmi_version_minor < 5)
+ return 1;
+ return 0;
+}
+
+/*
+ * ipmi_hp_chassis_detect()
+ * HP PA-RISC servers rp3410/rp3440, the C8000 workstation and the rx2600 and
+ * zx6000 machines support IPMI vers 1 and don't set the chassis capability bit
+ * but they can handle a chassis poweroff or powercycle command.
+ */
+
+#define HP_IANA_MFR_ID 0x0b
+#define HP_BMC_PROD_ID 0x8201
+static int ipmi_hp_chassis_detect(struct ipmi_user *user)
+{
+ if (mfg_id == HP_IANA_MFR_ID
+ && prod_id == HP_BMC_PROD_ID
+ && ipmi_version == 1)
+ return 1;
+ return 0;
+}
+
+/*
+ * Standard chassis support
+ */
+
+#define IPMI_NETFN_CHASSIS_REQUEST 0
+#define IPMI_CHASSIS_CONTROL_CMD 0x02
+
+static int ipmi_chassis_detect(struct ipmi_user *user)
+{
+ /* Chassis support, use it. */
+ return (capabilities & 0x80);
+}
+
+static void ipmi_poweroff_chassis(struct ipmi_user *user)
+{
+ struct ipmi_system_interface_addr smi_addr;
+ struct kernel_ipmi_msg send_msg;
+ int rv;
+ unsigned char data[1];
+
+ /*
+ * Configure IPMI address for local access
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
+
+ powercyclefailed:
+ pr_info("Powering %s via IPMI chassis control command\n",
+ (poweroff_powercycle ? "cycle" : "down"));
+
+ /*
+ * Power down
+ */
+ send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST;
+ send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD;
+ if (poweroff_powercycle)
+ data[0] = IPMI_CHASSIS_POWER_CYCLE;
+ else
+ data[0] = IPMI_CHASSIS_POWER_DOWN;
+ send_msg.data = data;
+ send_msg.data_len = sizeof(data);
+ rv = ipmi_request_in_rc_mode(user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+ if (rv) {
+ if (poweroff_powercycle) {
+ /* power cycle failed, default to power down */
+ pr_err("Unable to send chassis power cycle message, IPMI error 0x%x\n",
+ rv);
+ poweroff_powercycle = 0;
+ goto powercyclefailed;
+ }
+
+ pr_err("Unable to send chassis power down message, IPMI error 0x%x\n",
+ rv);
+ }
+}
+
+
+/* Table of possible power off functions. */
+struct poweroff_function {
+ char *platform_type;
+ int (*detect)(struct ipmi_user *user);
+ void (*poweroff_func)(struct ipmi_user *user);
+};
+
+static struct poweroff_function poweroff_functions[] = {
+ { .platform_type = "ATCA",
+ .detect = ipmi_atca_detect,
+ .poweroff_func = ipmi_poweroff_atca },
+ { .platform_type = "CPI1",
+ .detect = ipmi_cpi1_detect,
+ .poweroff_func = ipmi_poweroff_cpi1 },
+ { .platform_type = "chassis",
+ .detect = ipmi_dell_chassis_detect,
+ .poweroff_func = ipmi_poweroff_chassis },
+ { .platform_type = "chassis",
+ .detect = ipmi_hp_chassis_detect,
+ .poweroff_func = ipmi_poweroff_chassis },
+ /* Chassis should generally be last, other things should override
+ it. */
+ { .platform_type = "chassis",
+ .detect = ipmi_chassis_detect,
+ .poweroff_func = ipmi_poweroff_chassis },
+};
+#define NUM_PO_FUNCS ARRAY_SIZE(poweroff_functions)
+
+
+/* Called on a powerdown request. */
+static void ipmi_poweroff_function(void)
+{
+ if (!ready)
+ return;
+
+ /* Use run-to-completion mode, since interrupts may be off. */
+ specific_poweroff_func(ipmi_user);
+}
+
+/* Wait for an IPMI interface to be installed, the first one installed
+ will be grabbed by this code and used to perform the powerdown. */
+static void ipmi_po_new_smi(int if_num, struct device *device)
+{
+ struct ipmi_system_interface_addr smi_addr;
+ struct kernel_ipmi_msg send_msg;
+ int rv;
+ int i;
+
+ if (ready)
+ return;
+
+ if ((ifnum_to_use >= 0) && (ifnum_to_use != if_num))
+ return;
+
+ rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL,
+ &ipmi_user);
+ if (rv) {
+ pr_err("could not create IPMI user, error %d\n", rv);
+ return;
+ }
+
+ ipmi_ifnum = if_num;
+
+ /*
+ * Do a get device ide and store some results, since this is
+ * used by several functions.
+ */
+ smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr.channel = IPMI_BMC_CHANNEL;
+ smi_addr.lun = 0;
+
+ send_msg.netfn = IPMI_NETFN_APP_REQUEST;
+ send_msg.cmd = IPMI_GET_DEVICE_ID_CMD;
+ send_msg.data = NULL;
+ send_msg.data_len = 0;
+ rv = ipmi_request_wait_for_response(ipmi_user,
+ (struct ipmi_addr *) &smi_addr,
+ &send_msg);
+ if (rv) {
+ pr_err("Unable to send IPMI get device id info, IPMI error 0x%x\n",
+ rv);
+ goto out_err;
+ }
+
+ if (halt_recv_msg.msg.data_len < 12) {
+ pr_err("(chassis) IPMI get device id info too short, was %d bytes, needed %d bytes\n",
+ halt_recv_msg.msg.data_len, 12);
+ goto out_err;
+ }
+
+ mfg_id = (halt_recv_msg.msg.data[7]
+ | (halt_recv_msg.msg.data[8] << 8)
+ | (halt_recv_msg.msg.data[9] << 16));
+ prod_id = (halt_recv_msg.msg.data[10]
+ | (halt_recv_msg.msg.data[11] << 8));
+ capabilities = halt_recv_msg.msg.data[6];
+ ipmi_version = halt_recv_msg.msg.data[5];
+
+
+ /* Scan for a poweroff method */
+ for (i = 0; i < NUM_PO_FUNCS; i++) {
+ if (poweroff_functions[i].detect(ipmi_user))
+ goto found;
+ }
+
+ out_err:
+ pr_err("Unable to find a poweroff function that will work, giving up\n");
+ ipmi_destroy_user(ipmi_user);
+ return;
+
+ found:
+ pr_info("Found a %s style poweroff function\n",
+ poweroff_functions[i].platform_type);
+ specific_poweroff_func = poweroff_functions[i].poweroff_func;
+ old_poweroff_func = pm_power_off;
+ pm_power_off = ipmi_poweroff_function;
+ ready = 1;
+}
+
+static void ipmi_po_smi_gone(int if_num)
+{
+ if (!ready)
+ return;
+
+ if (ipmi_ifnum != if_num)
+ return;
+
+ ready = 0;
+ ipmi_destroy_user(ipmi_user);
+ pm_power_off = old_poweroff_func;
+}
+
+static struct ipmi_smi_watcher smi_watcher = {
+ .owner = THIS_MODULE,
+ .new_smi = ipmi_po_new_smi,
+ .smi_gone = ipmi_po_smi_gone
+};
+
+
+#ifdef CONFIG_PROC_FS
+#include <linux/sysctl.h>
+
+static struct ctl_table ipmi_table[] = {
+ { .procname = "poweroff_powercycle",
+ .data = &poweroff_powercycle,
+ .maxlen = sizeof(poweroff_powercycle),
+ .mode = 0644,
+ .proc_handler = proc_dointvec },
+ { }
+};
+
+static struct ctl_table ipmi_dir_table[] = {
+ { .procname = "ipmi",
+ .mode = 0555,
+ .child = ipmi_table },
+ { }
+};
+
+static struct ctl_table ipmi_root_table[] = {
+ { .procname = "dev",
+ .mode = 0555,
+ .child = ipmi_dir_table },
+ { }
+};
+
+static struct ctl_table_header *ipmi_table_header;
+#endif /* CONFIG_PROC_FS */
+
+/*
+ * Startup and shutdown functions.
+ */
+static int __init ipmi_poweroff_init(void)
+{
+ int rv;
+
+ pr_info("Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot\n");
+
+ if (poweroff_powercycle)
+ pr_info("Power cycle is enabled\n");
+
+#ifdef CONFIG_PROC_FS
+ ipmi_table_header = register_sysctl_table(ipmi_root_table);
+ if (!ipmi_table_header) {
+ pr_err("Unable to register powercycle sysctl\n");
+ rv = -ENOMEM;
+ goto out_err;
+ }
+#endif
+
+ rv = ipmi_smi_watcher_register(&smi_watcher);
+
+#ifdef CONFIG_PROC_FS
+ if (rv) {
+ unregister_sysctl_table(ipmi_table_header);
+ pr_err("Unable to register SMI watcher: %d\n", rv);
+ goto out_err;
+ }
+
+ out_err:
+#endif
+ return rv;
+}
+
+#ifdef MODULE
+static void __exit ipmi_poweroff_cleanup(void)
+{
+ int rv;
+
+#ifdef CONFIG_PROC_FS
+ unregister_sysctl_table(ipmi_table_header);
+#endif
+
+ ipmi_smi_watcher_unregister(&smi_watcher);
+
+ if (ready) {
+ rv = ipmi_destroy_user(ipmi_user);
+ if (rv)
+ pr_err("could not cleanup the IPMI user: 0x%x\n", rv);
+ pm_power_off = old_poweroff_func;
+ }
+}
+module_exit(ipmi_poweroff_cleanup);
+#endif
+
+module_init(ipmi_poweroff_init);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
+MODULE_DESCRIPTION("IPMI Poweroff extension to sys_reboot");