summaryrefslogtreecommitdiffstats
path: root/drivers/clk/clk-versaclock5.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clk/clk-versaclock5.c')
-rw-r--r--drivers/clk/clk-versaclock5.c1326
1 files changed, 1326 insertions, 0 deletions
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
new file mode 100644
index 000000000..ef50ab78d
--- /dev/null
+++ b/drivers/clk/clk-versaclock5.c
@@ -0,0 +1,1326 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for IDT Versaclock 5
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+/*
+ * Possible optimizations:
+ * - Use spread spectrum
+ * - Use integer divider in FOD if applicable
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rational.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/versaclock.h>
+
+/* VersaClock5 registers */
+#define VC5_OTP_CONTROL 0x00
+
+/* Factory-reserved register block */
+#define VC5_RSVD_DEVICE_ID 0x01
+#define VC5_RSVD_ADC_GAIN_7_0 0x02
+#define VC5_RSVD_ADC_GAIN_15_8 0x03
+#define VC5_RSVD_ADC_OFFSET_7_0 0x04
+#define VC5_RSVD_ADC_OFFSET_15_8 0x05
+#define VC5_RSVD_TEMPY 0x06
+#define VC5_RSVD_OFFSET_TBIN 0x07
+#define VC5_RSVD_GAIN 0x08
+#define VC5_RSVD_TEST_NP 0x09
+#define VC5_RSVD_UNUSED 0x0a
+#define VC5_RSVD_BANDGAP_TRIM_UP 0x0b
+#define VC5_RSVD_BANDGAP_TRIM_DN 0x0c
+#define VC5_RSVD_CLK_R_12_CLK_AMP_4 0x0d
+#define VC5_RSVD_CLK_R_34_CLK_AMP_4 0x0e
+#define VC5_RSVD_CLK_AMP_123 0x0f
+
+/* Configuration register block */
+#define VC5_PRIM_SRC_SHDN 0x10
+#define VC5_PRIM_SRC_SHDN_EN_XTAL BIT(7)
+#define VC5_PRIM_SRC_SHDN_EN_CLKIN BIT(6)
+#define VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ BIT(3)
+#define VC5_PRIM_SRC_SHDN_SP BIT(1)
+#define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN BIT(0)
+
+#define VC5_VCO_BAND 0x11
+#define VC5_XTAL_X1_LOAD_CAP 0x12
+#define VC5_XTAL_X2_LOAD_CAP 0x13
+#define VC5_REF_DIVIDER 0x15
+#define VC5_REF_DIVIDER_SEL_PREDIV2 BIT(7)
+#define VC5_REF_DIVIDER_REF_DIV(n) ((n) & 0x3f)
+
+#define VC5_VCO_CTRL_AND_PREDIV 0x16
+#define VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV BIT(7)
+
+#define VC5_FEEDBACK_INT_DIV 0x17
+#define VC5_FEEDBACK_INT_DIV_BITS 0x18
+#define VC5_FEEDBACK_FRAC_DIV(n) (0x19 + (n))
+#define VC5_RC_CONTROL0 0x1e
+#define VC5_RC_CONTROL1 0x1f
+
+/* These registers are named "Unused Factory Reserved Registers" */
+#define VC5_RESERVED_X0(idx) (0x20 + ((idx) * 0x10))
+#define VC5_RESERVED_X0_BYPASS_SYNC BIT(7) /* bypass_sync<idx> bit */
+
+/* Output divider control for divider 1,2,3,4 */
+#define VC5_OUT_DIV_CONTROL(idx) (0x21 + ((idx) * 0x10))
+#define VC5_OUT_DIV_CONTROL_RESET BIT(7)
+#define VC5_OUT_DIV_CONTROL_SELB_NORM BIT(3)
+#define VC5_OUT_DIV_CONTROL_SEL_EXT BIT(2)
+#define VC5_OUT_DIV_CONTROL_INT_MODE BIT(1)
+#define VC5_OUT_DIV_CONTROL_EN_FOD BIT(0)
+
+#define VC5_OUT_DIV_FRAC(idx, n) (0x22 + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_FRAC4_OD_SCEE BIT(1)
+
+#define VC5_OUT_DIV_STEP_SPREAD(idx, n) (0x26 + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_SPREAD_MOD(idx, n) (0x29 + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_SKEW_INT(idx, n) (0x2b + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_INT(idx, n) (0x2d + ((idx) * 0x10) + (n))
+#define VC5_OUT_DIV_SKEW_FRAC(idx) (0x2f + ((idx) * 0x10))
+
+/* Clock control register for clock 1,2 */
+#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n))
+#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT 5
+#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT)
+
+#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL (VC5_LVPECL)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS (VC5_CMOS)
+#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33 (VC5_HCSL33)
+#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS (VC5_LVDS)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2 (VC5_CMOS2)
+#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD (VC5_CMOSD)
+#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25 (VC5_HCSL25)
+
+#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT 3
+#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_18 (0<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_25 (2<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_PWR_33 (3<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT 0
+#define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_80 (0<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_85 (1<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_90 (2<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG0_SLEW_100 (3<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
+#define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0)
+
+#define VC5_CLK_OE_SHDN 0x68
+#define VC5_CLK_OS_SHDN 0x69
+
+#define VC5_GLOBAL_REGISTER 0x76
+#define VC5_GLOBAL_REGISTER_GLOBAL_RESET BIT(5)
+
+/* PLL/VCO runs between 2.5 GHz and 3.0 GHz */
+#define VC5_PLL_VCO_MIN 2500000000UL
+#define VC5_PLL_VCO_MAX 3000000000UL
+
+/* VC5 Input mux settings */
+#define VC5_MUX_IN_XIN BIT(0)
+#define VC5_MUX_IN_CLKIN BIT(1)
+
+/* Maximum number of clk_out supported by this driver */
+#define VC5_MAX_CLK_OUT_NUM 5
+
+/* Maximum number of FODs supported by this driver */
+#define VC5_MAX_FOD_NUM 4
+
+/* flags to describe chip features */
+/* chip has built-in oscilator */
+#define VC5_HAS_INTERNAL_XTAL BIT(0)
+/* chip has PFD requency doubler */
+#define VC5_HAS_PFD_FREQ_DBL BIT(1)
+/* chip has bits to disable FOD sync */
+#define VC5_HAS_BYPASS_SYNC_BIT BIT(2)
+
+/* Supported IDT VC5 models. */
+enum vc5_model {
+ IDT_VC5_5P49V5923,
+ IDT_VC5_5P49V5925,
+ IDT_VC5_5P49V5933,
+ IDT_VC5_5P49V5935,
+ IDT_VC6_5P49V6901,
+ IDT_VC6_5P49V6965,
+ IDT_VC6_5P49V6975,
+};
+
+/* Structure to describe features of a particular VC5 model */
+struct vc5_chip_info {
+ const enum vc5_model model;
+ const unsigned int clk_fod_cnt;
+ const unsigned int clk_out_cnt;
+ const u32 flags;
+};
+
+struct vc5_driver_data;
+
+struct vc5_hw_data {
+ struct clk_hw hw;
+ struct vc5_driver_data *vc5;
+ u32 div_int;
+ u32 div_frc;
+ unsigned int num;
+};
+
+struct vc5_out_data {
+ struct clk_hw hw;
+ struct vc5_driver_data *vc5;
+ unsigned int num;
+ unsigned int clk_output_cfg0;
+ unsigned int clk_output_cfg0_mask;
+};
+
+struct vc5_driver_data {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ const struct vc5_chip_info *chip_info;
+
+ struct clk *pin_xin;
+ struct clk *pin_clkin;
+ unsigned char clk_mux_ins;
+ struct clk_hw clk_mux;
+ struct clk_hw clk_mul;
+ struct clk_hw clk_pfd;
+ struct vc5_hw_data clk_pll;
+ struct vc5_hw_data clk_fod[VC5_MAX_FOD_NUM];
+ struct vc5_out_data clk_out[VC5_MAX_CLK_OUT_NUM];
+};
+
+/*
+ * VersaClock5 i2c regmap
+ */
+static bool vc5_regmap_is_writeable(struct device *dev, unsigned int reg)
+{
+ /* Factory reserved regs, make them read-only */
+ if (reg <= 0xf)
+ return false;
+
+ /* Factory reserved regs, make them read-only */
+ if (reg == 0x14 || reg == 0x1c || reg == 0x1d)
+ return false;
+
+ return true;
+}
+
+static const struct regmap_config vc5_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = 0x76,
+ .writeable_reg = vc5_regmap_is_writeable,
+};
+
+/*
+ * VersaClock5 input multiplexer between XTAL and CLKIN divider
+ */
+static unsigned char vc5_mux_get_parent(struct clk_hw *hw)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_mux);
+ const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ unsigned int src;
+ int ret;
+
+ ret = regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &src);
+ if (ret)
+ return 0;
+
+ src &= mask;
+
+ if (src == VC5_PRIM_SRC_SHDN_EN_XTAL)
+ return 0;
+
+ if (src == VC5_PRIM_SRC_SHDN_EN_CLKIN)
+ return 1;
+
+ dev_warn(&vc5->client->dev,
+ "Invalid clock input configuration (%02x)\n", src);
+ return 0;
+}
+
+static int vc5_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_mux);
+ const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ u8 src;
+
+ if ((index > 1) || !vc5->clk_mux_ins)
+ return -EINVAL;
+
+ if (vc5->clk_mux_ins == (VC5_MUX_IN_CLKIN | VC5_MUX_IN_XIN)) {
+ if (index == 0)
+ src = VC5_PRIM_SRC_SHDN_EN_XTAL;
+ if (index == 1)
+ src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ } else {
+ if (index != 0)
+ return -EINVAL;
+
+ if (vc5->clk_mux_ins == VC5_MUX_IN_XIN)
+ src = VC5_PRIM_SRC_SHDN_EN_XTAL;
+ else if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN)
+ src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ else /* Invalid; should have been caught by vc5_probe() */
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, mask, src);
+}
+
+static const struct clk_ops vc5_mux_ops = {
+ .set_parent = vc5_mux_set_parent,
+ .get_parent = vc5_mux_get_parent,
+};
+
+static unsigned long vc5_dbl_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_mul);
+ unsigned int premul;
+ int ret;
+
+ ret = regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &premul);
+ if (ret)
+ return 0;
+
+ if (premul & VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ)
+ parent_rate *= 2;
+
+ return parent_rate;
+}
+
+static long vc5_dbl_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ if ((*parent_rate == rate) || ((*parent_rate * 2) == rate))
+ return rate;
+ else
+ return -EINVAL;
+}
+
+static int vc5_dbl_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_mul);
+ u32 mask;
+
+ if ((parent_rate * 2) == rate)
+ mask = VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ;
+ else
+ mask = 0;
+
+ return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN,
+ VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ,
+ mask);
+}
+
+static const struct clk_ops vc5_dbl_ops = {
+ .recalc_rate = vc5_dbl_recalc_rate,
+ .round_rate = vc5_dbl_round_rate,
+ .set_rate = vc5_dbl_set_rate,
+};
+
+static unsigned long vc5_pfd_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_pfd);
+ unsigned int prediv, div;
+ int ret;
+
+ ret = regmap_read(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, &prediv);
+ if (ret)
+ return 0;
+
+ /* The bypass_prediv is set, PLL fed from Ref_in directly. */
+ if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV)
+ return parent_rate;
+
+ ret = regmap_read(vc5->regmap, VC5_REF_DIVIDER, &div);
+ if (ret)
+ return 0;
+
+ /* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */
+ if (div & VC5_REF_DIVIDER_SEL_PREDIV2)
+ return parent_rate / 2;
+ else
+ return parent_rate / VC5_REF_DIVIDER_REF_DIV(div);
+}
+
+static long vc5_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long idiv;
+
+ /* PLL cannot operate with input clock above 50 MHz. */
+ if (rate > 50000000)
+ return -EINVAL;
+
+ /* CLKIN within range of PLL input, feed directly to PLL. */
+ if (*parent_rate <= 50000000)
+ return *parent_rate;
+
+ idiv = DIV_ROUND_UP(*parent_rate, rate);
+ if (idiv > 127)
+ return -EINVAL;
+
+ return *parent_rate / idiv;
+}
+
+static int vc5_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct vc5_driver_data *vc5 =
+ container_of(hw, struct vc5_driver_data, clk_pfd);
+ unsigned long idiv;
+ int ret;
+ u8 div;
+
+ /* CLKIN within range of PLL input, feed directly to PLL. */
+ if (parent_rate <= 50000000) {
+ ret = regmap_set_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
+ VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, 0x00);
+ }
+
+ idiv = DIV_ROUND_UP(parent_rate, rate);
+
+ /* We have dedicated div-2 predivider. */
+ if (idiv == 2)
+ div = VC5_REF_DIVIDER_SEL_PREDIV2;
+ else
+ div = VC5_REF_DIVIDER_REF_DIV(idiv);
+
+ ret = regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, div);
+ if (ret)
+ return ret;
+
+ return regmap_clear_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
+ VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
+}
+
+static const struct clk_ops vc5_pfd_ops = {
+ .recalc_rate = vc5_pfd_recalc_rate,
+ .round_rate = vc5_pfd_round_rate,
+ .set_rate = vc5_pfd_set_rate,
+};
+
+/*
+ * VersaClock5 PLL/VCO
+ */
+static unsigned long vc5_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ u32 div_int, div_frc;
+ u8 fb[5];
+
+ regmap_bulk_read(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5);
+
+ div_int = (fb[0] << 4) | (fb[1] >> 4);
+ div_frc = (fb[2] << 16) | (fb[3] << 8) | fb[4];
+
+ /* The PLL divider has 12 integer bits and 24 fractional bits */
+ return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24);
+}
+
+static long vc5_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ u32 div_int;
+ u64 div_frc;
+
+ rate = clamp(rate, VC5_PLL_VCO_MIN, VC5_PLL_VCO_MAX);
+
+ /* Determine integer part, which is 12 bit wide */
+ div_int = rate / *parent_rate;
+ if (div_int > 0xfff)
+ rate = *parent_rate * 0xfff;
+
+ /* Determine best fractional part, which is 24 bit wide */
+ div_frc = rate % *parent_rate;
+ div_frc *= BIT(24) - 1;
+ do_div(div_frc, *parent_rate);
+
+ hwdata->div_int = div_int;
+ hwdata->div_frc = (u32)div_frc;
+
+ return (*parent_rate * div_int) + ((*parent_rate * div_frc) >> 24);
+}
+
+static int vc5_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ u8 fb[5];
+
+ fb[0] = hwdata->div_int >> 4;
+ fb[1] = hwdata->div_int << 4;
+ fb[2] = hwdata->div_frc >> 16;
+ fb[3] = hwdata->div_frc >> 8;
+ fb[4] = hwdata->div_frc;
+
+ return regmap_bulk_write(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5);
+}
+
+static const struct clk_ops vc5_pll_ops = {
+ .recalc_rate = vc5_pll_recalc_rate,
+ .round_rate = vc5_pll_round_rate,
+ .set_rate = vc5_pll_set_rate,
+};
+
+static unsigned long vc5_fod_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ /* VCO frequency is divided by two before entering FOD */
+ u32 f_in = parent_rate / 2;
+ u32 div_int, div_frc;
+ u8 od_int[2];
+ u8 od_frc[4];
+
+ regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_INT(hwdata->num, 0),
+ od_int, 2);
+ regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
+ od_frc, 4);
+
+ div_int = (od_int[0] << 4) | (od_int[1] >> 4);
+ div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) |
+ (od_frc[2] << 6) | (od_frc[3] >> 2);
+
+ /* Avoid division by zero if the output is not configured. */
+ if (div_int == 0 && div_frc == 0)
+ return 0;
+
+ /* The PLL divider has 12 integer bits and 30 fractional bits */
+ return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
+}
+
+static long vc5_fod_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ /* VCO frequency is divided by two before entering FOD */
+ u32 f_in = *parent_rate / 2;
+ u32 div_int;
+ u64 div_frc;
+
+ /* Determine integer part, which is 12 bit wide */
+ div_int = f_in / rate;
+ /*
+ * WARNING: The clock chip does not output signal if the integer part
+ * of the divider is 0xfff and fractional part is non-zero.
+ * Clamp the divider at 0xffe to keep the code simple.
+ */
+ if (div_int > 0xffe) {
+ div_int = 0xffe;
+ rate = f_in / div_int;
+ }
+
+ /* Determine best fractional part, which is 30 bit wide */
+ div_frc = f_in % rate;
+ div_frc <<= 24;
+ do_div(div_frc, rate);
+
+ hwdata->div_int = div_int;
+ hwdata->div_frc = (u32)div_frc;
+
+ return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
+}
+
+static int vc5_fod_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ u8 data[14] = {
+ hwdata->div_frc >> 22, hwdata->div_frc >> 14,
+ hwdata->div_frc >> 6, hwdata->div_frc << 2,
+ 0, 0, 0, 0, 0,
+ 0, 0,
+ hwdata->div_int >> 4, hwdata->div_int << 4,
+ 0
+ };
+ int ret;
+
+ ret = regmap_bulk_write(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
+ data, 14);
+ if (ret)
+ return ret;
+
+ /*
+ * Toggle magic bit in undocumented register for unknown reason.
+ * This is what the IDT timing commander tool does and the chip
+ * datasheet somewhat implies this is needed, but the register
+ * and the bit is not documented.
+ */
+ ret = regmap_clear_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
+ VC5_GLOBAL_REGISTER_GLOBAL_RESET);
+ if (ret)
+ return ret;
+
+ return regmap_set_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
+ VC5_GLOBAL_REGISTER_GLOBAL_RESET);
+}
+
+static const struct clk_ops vc5_fod_ops = {
+ .recalc_rate = vc5_fod_recalc_rate,
+ .round_rate = vc5_fod_round_rate,
+ .set_rate = vc5_fod_set_rate,
+};
+
+static int vc5_clk_out_prepare(struct clk_hw *hw)
+{
+ struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT |
+ VC5_OUT_DIV_CONTROL_EN_FOD;
+ unsigned int src;
+ int ret;
+
+ /*
+ * When enabling a FOD, all currently enabled FODs are briefly
+ * stopped in order to synchronize all of them. This causes a clock
+ * disruption to any unrelated chips that might be already using
+ * other clock outputs. Bypass the sync feature to avoid the issue,
+ * which is possible on the VersaClock 6E family via reserved
+ * registers.
+ */
+ if (vc5->chip_info->flags & VC5_HAS_BYPASS_SYNC_BIT) {
+ ret = regmap_set_bits(vc5->regmap,
+ VC5_RESERVED_X0(hwdata->num),
+ VC5_RESERVED_X0_BYPASS_SYNC);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * If the input mux is disabled, enable it first and
+ * select source from matching FOD.
+ */
+ ret = regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
+ if (ret)
+ return ret;
+
+ if ((src & mask) == 0) {
+ src = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_EN_FOD;
+ ret = regmap_update_bits(vc5->regmap,
+ VC5_OUT_DIV_CONTROL(hwdata->num),
+ mask | VC5_OUT_DIV_CONTROL_RESET, src);
+ if (ret)
+ return ret;
+ }
+
+ /* Enable the clock buffer */
+ ret = regmap_set_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
+ VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
+ if (ret)
+ return ret;
+
+ if (hwdata->clk_output_cfg0_mask) {
+ dev_dbg(&vc5->client->dev, "Update output %d mask 0x%0X val 0x%0X\n",
+ hwdata->num, hwdata->clk_output_cfg0_mask,
+ hwdata->clk_output_cfg0);
+
+ ret = regmap_update_bits(vc5->regmap,
+ VC5_CLK_OUTPUT_CFG(hwdata->num, 0),
+ hwdata->clk_output_cfg0_mask,
+ hwdata->clk_output_cfg0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void vc5_clk_out_unprepare(struct clk_hw *hw)
+{
+ struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+
+ /* Disable the clock buffer */
+ regmap_clear_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
+ VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
+}
+
+static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw)
+{
+ struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT |
+ VC5_OUT_DIV_CONTROL_EN_FOD;
+ const u8 fodclkmask = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_EN_FOD;
+ const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT;
+ unsigned int src;
+ int ret;
+
+ ret = regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
+ if (ret)
+ return 0;
+
+ src &= mask;
+
+ if (src == 0) /* Input mux set to DISABLED */
+ return 0;
+
+ if ((src & fodclkmask) == VC5_OUT_DIV_CONTROL_EN_FOD)
+ return 0;
+
+ if (src == extclk)
+ return 1;
+
+ dev_warn(&vc5->client->dev,
+ "Invalid clock output configuration (%02x)\n", src);
+ return 0;
+}
+
+static int vc5_clk_out_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw);
+ struct vc5_driver_data *vc5 = hwdata->vc5;
+ const u8 mask = VC5_OUT_DIV_CONTROL_RESET |
+ VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT |
+ VC5_OUT_DIV_CONTROL_EN_FOD;
+ const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
+ VC5_OUT_DIV_CONTROL_SEL_EXT;
+ u8 src = VC5_OUT_DIV_CONTROL_RESET;
+
+ if (index == 0)
+ src |= VC5_OUT_DIV_CONTROL_EN_FOD;
+ else
+ src |= extclk;
+
+ return regmap_update_bits(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num),
+ mask, src);
+}
+
+static const struct clk_ops vc5_clk_out_ops = {
+ .prepare = vc5_clk_out_prepare,
+ .unprepare = vc5_clk_out_unprepare,
+ .set_parent = vc5_clk_out_set_parent,
+ .get_parent = vc5_clk_out_get_parent,
+};
+
+static struct clk_hw *vc5_of_clk_get(struct of_phandle_args *clkspec,
+ void *data)
+{
+ struct vc5_driver_data *vc5 = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= vc5->chip_info->clk_out_cnt)
+ return ERR_PTR(-EINVAL);
+
+ return &vc5->clk_out[idx].hw;
+}
+
+static int vc5_map_index_to_output(const enum vc5_model model,
+ const unsigned int n)
+{
+ switch (model) {
+ case IDT_VC5_5P49V5933:
+ return (n == 0) ? 0 : 3;
+ case IDT_VC5_5P49V5923:
+ case IDT_VC5_5P49V5925:
+ case IDT_VC5_5P49V5935:
+ case IDT_VC6_5P49V6901:
+ case IDT_VC6_5P49V6965:
+ case IDT_VC6_5P49V6975:
+ default:
+ return n;
+ }
+}
+
+static int vc5_update_mode(struct device_node *np_output,
+ struct vc5_out_data *clk_out)
+{
+ u32 value;
+
+ if (!of_property_read_u32(np_output, "idt,mode", &value)) {
+ clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK;
+ switch (value) {
+ case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL:
+ case VC5_CLK_OUTPUT_CFG0_CFG_CMOS:
+ case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33:
+ case VC5_CLK_OUTPUT_CFG0_CFG_LVDS:
+ case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2:
+ case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD:
+ case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25:
+ clk_out->clk_output_cfg0 |=
+ value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int vc5_update_power(struct device_node *np_output,
+ struct vc5_out_data *clk_out)
+{
+ u32 value;
+
+ if (!of_property_read_u32(np_output, "idt,voltage-microvolt",
+ &value)) {
+ clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK;
+ switch (value) {
+ case 1800000:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18;
+ break;
+ case 2500000:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25;
+ break;
+ case 3300000:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int vc5_map_cap_value(u32 femtofarads)
+{
+ int mapped_value;
+
+ /*
+ * The datasheet explicitly states 9000 - 25000 with 0.5pF
+ * steps, but the Programmer's guide shows the steps are 0.430pF.
+ * After getting feedback from Renesas, the .5pF steps were the
+ * goal, but 430nF was the actual values.
+ * Because of this, the actual range goes to 22760 instead of 25000
+ */
+ if (femtofarads < 9000 || femtofarads > 22760)
+ return -EINVAL;
+
+ /*
+ * The Programmer's guide shows XTAL[5:0] but in reality,
+ * XTAL[0] and XTAL[1] are both LSB which makes the math
+ * strange. With clarfication from Renesas, setting the
+ * values should be simpler by ignoring XTAL[0]
+ */
+ mapped_value = DIV_ROUND_CLOSEST(femtofarads - 9000, 430);
+
+ /*
+ * Since the calculation ignores XTAL[0], there is one
+ * special case where mapped_value = 32. In reality, this means
+ * the real mapped value should be 111111b. In other cases,
+ * the mapped_value needs to be shifted 1 to the left.
+ */
+ if (mapped_value > 31)
+ mapped_value = 0x3f;
+ else
+ mapped_value <<= 1;
+
+ return mapped_value;
+}
+static int vc5_update_cap_load(struct device_node *node, struct vc5_driver_data *vc5)
+{
+ u32 value;
+ int mapped_value;
+ int ret;
+
+ if (of_property_read_u32(node, "idt,xtal-load-femtofarads", &value))
+ return 0;
+
+ mapped_value = vc5_map_cap_value(value);
+ if (mapped_value < 0)
+ return mapped_value;
+
+ /*
+ * The mapped_value is really the high 6 bits of
+ * VC5_XTAL_X1_LOAD_CAP and VC5_XTAL_X2_LOAD_CAP, so
+ * shift the value 2 places.
+ */
+ ret = regmap_update_bits(vc5->regmap, VC5_XTAL_X1_LOAD_CAP, ~0x03,
+ mapped_value << 2);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(vc5->regmap, VC5_XTAL_X2_LOAD_CAP, ~0x03,
+ mapped_value << 2);
+}
+
+static int vc5_update_slew(struct device_node *np_output,
+ struct vc5_out_data *clk_out)
+{
+ u32 value;
+
+ if (!of_property_read_u32(np_output, "idt,slew-percent", &value)) {
+ clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK;
+ switch (value) {
+ case 80:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80;
+ break;
+ case 85:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85;
+ break;
+ case 90:
+ clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90;
+ break;
+ case 100:
+ clk_out->clk_output_cfg0 |=
+ VC5_CLK_OUTPUT_CFG0_SLEW_100;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int vc5_get_output_config(struct i2c_client *client,
+ struct vc5_out_data *clk_out)
+{
+ struct device_node *np_output;
+ char *child_name;
+ int ret = 0;
+
+ child_name = kasprintf(GFP_KERNEL, "OUT%d", clk_out->num + 1);
+ if (!child_name)
+ return -ENOMEM;
+
+ np_output = of_get_child_by_name(client->dev.of_node, child_name);
+ kfree(child_name);
+ if (!np_output)
+ return 0;
+
+ ret = vc5_update_mode(np_output, clk_out);
+ if (ret)
+ goto output_error;
+
+ ret = vc5_update_power(np_output, clk_out);
+ if (ret)
+ goto output_error;
+
+ ret = vc5_update_slew(np_output, clk_out);
+
+output_error:
+ if (ret) {
+ dev_err(&client->dev,
+ "Invalid clock output configuration OUT%d\n",
+ clk_out->num + 1);
+ }
+
+ of_node_put(np_output);
+
+ return ret;
+}
+
+static const struct of_device_id clk_vc5_of_match[];
+
+static int vc5_probe(struct i2c_client *client)
+{
+ unsigned int oe, sd, src_mask = 0, src_val = 0;
+ struct vc5_driver_data *vc5;
+ struct clk_init_data init;
+ const char *parent_names[2];
+ unsigned int n, idx = 0;
+ int ret;
+
+ vc5 = devm_kzalloc(&client->dev, sizeof(*vc5), GFP_KERNEL);
+ if (!vc5)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, vc5);
+ vc5->client = client;
+ vc5->chip_info = of_device_get_match_data(&client->dev);
+
+ vc5->pin_xin = devm_clk_get(&client->dev, "xin");
+ if (PTR_ERR(vc5->pin_xin) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ vc5->pin_clkin = devm_clk_get(&client->dev, "clkin");
+ if (PTR_ERR(vc5->pin_clkin) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ vc5->regmap = devm_regmap_init_i2c(client, &vc5_regmap_config);
+ if (IS_ERR(vc5->regmap))
+ return dev_err_probe(&client->dev, PTR_ERR(vc5->regmap),
+ "failed to allocate register map\n");
+
+ ret = of_property_read_u32(client->dev.of_node, "idt,shutdown", &sd);
+ if (!ret) {
+ src_mask |= VC5_PRIM_SRC_SHDN_EN_GBL_SHDN;
+ if (sd)
+ src_val |= VC5_PRIM_SRC_SHDN_EN_GBL_SHDN;
+ } else if (ret != -EINVAL) {
+ return dev_err_probe(&client->dev, ret,
+ "could not read idt,shutdown\n");
+ }
+
+ ret = of_property_read_u32(client->dev.of_node,
+ "idt,output-enable-active", &oe);
+ if (!ret) {
+ src_mask |= VC5_PRIM_SRC_SHDN_SP;
+ if (oe)
+ src_val |= VC5_PRIM_SRC_SHDN_SP;
+ } else if (ret != -EINVAL) {
+ return dev_err_probe(&client->dev, ret,
+ "could not read idt,output-enable-active\n");
+ }
+
+ ret = regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, src_mask,
+ src_val);
+ if (ret)
+ return ret;
+
+ /* Register clock input mux */
+ memset(&init, 0, sizeof(init));
+
+ if (!IS_ERR(vc5->pin_xin)) {
+ vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
+ parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin);
+ } else if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL) {
+ vc5->pin_xin = clk_register_fixed_rate(&client->dev,
+ "internal-xtal", NULL,
+ 0, 25000000);
+ if (IS_ERR(vc5->pin_xin))
+ return PTR_ERR(vc5->pin_xin);
+ vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
+ parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin);
+ }
+
+ if (!IS_ERR(vc5->pin_clkin)) {
+ vc5->clk_mux_ins |= VC5_MUX_IN_CLKIN;
+ parent_names[init.num_parents++] =
+ __clk_get_name(vc5->pin_clkin);
+ }
+
+ if (!init.num_parents)
+ return dev_err_probe(&client->dev, -EINVAL,
+ "no input clock specified!\n");
+
+ /* Configure Optional Loading Capacitance for external XTAL */
+ if (!(vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)) {
+ ret = vc5_update_cap_load(client->dev.of_node, vc5);
+ if (ret)
+ goto err_clk_register;
+ }
+
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.mux", client->dev.of_node);
+ if (!init.name) {
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+
+ init.ops = &vc5_mux_ops;
+ init.flags = 0;
+ init.parent_names = parent_names;
+ vc5->clk_mux.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux);
+ if (ret)
+ goto err_clk_register;
+ kfree(init.name); /* clock framework made a copy of the name */
+
+ if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) {
+ /* Register frequency doubler */
+ memset(&init, 0, sizeof(init));
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.dbl",
+ client->dev.of_node);
+ if (!init.name) {
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+ init.ops = &vc5_dbl_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
+ init.num_parents = 1;
+ vc5->clk_mul.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_mul);
+ if (ret)
+ goto err_clk_register;
+ kfree(init.name); /* clock framework made a copy of the name */
+ }
+
+ /* Register PFD */
+ memset(&init, 0, sizeof(init));
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.pfd", client->dev.of_node);
+ if (!init.name) {
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+ init.ops = &vc5_pfd_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL)
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mul);
+ else
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
+ init.num_parents = 1;
+ vc5->clk_pfd.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_pfd);
+ if (ret)
+ goto err_clk_register;
+ kfree(init.name); /* clock framework made a copy of the name */
+
+ /* Register PLL */
+ memset(&init, 0, sizeof(init));
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.pll", client->dev.of_node);
+ if (!init.name) {
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+ init.ops = &vc5_pll_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_pfd);
+ init.num_parents = 1;
+ vc5->clk_pll.num = 0;
+ vc5->clk_pll.vc5 = vc5;
+ vc5->clk_pll.hw.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw);
+ if (ret)
+ goto err_clk_register;
+ kfree(init.name); /* clock framework made a copy of the name */
+
+ /* Register FODs */
+ for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) {
+ idx = vc5_map_index_to_output(vc5->chip_info->model, n);
+ memset(&init, 0, sizeof(init));
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.fod%d",
+ client->dev.of_node, idx);
+ if (!init.name) {
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+ init.ops = &vc5_fod_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_pll.hw);
+ init.num_parents = 1;
+ vc5->clk_fod[n].num = idx;
+ vc5->clk_fod[n].vc5 = vc5;
+ vc5->clk_fod[n].hw.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw);
+ if (ret)
+ goto err_clk_register;
+ kfree(init.name); /* clock framework made a copy of the name */
+ }
+
+ /* Register MUX-connected OUT0_I2C_SELB output */
+ memset(&init, 0, sizeof(init));
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.out0_sel_i2cb",
+ client->dev.of_node);
+ if (!init.name) {
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+ init.ops = &vc5_clk_out_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ parent_names[0] = clk_hw_get_name(&vc5->clk_mux);
+ init.num_parents = 1;
+ vc5->clk_out[0].num = idx;
+ vc5->clk_out[0].vc5 = vc5;
+ vc5->clk_out[0].hw.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw);
+ if (ret)
+ goto err_clk_register;
+ kfree(init.name); /* clock framework made a copy of the name */
+
+ /* Register FOD-connected OUTx outputs */
+ for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) {
+ idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1);
+ parent_names[0] = clk_hw_get_name(&vc5->clk_fod[idx].hw);
+ if (n == 1)
+ parent_names[1] = clk_hw_get_name(&vc5->clk_mux);
+ else
+ parent_names[1] =
+ clk_hw_get_name(&vc5->clk_out[n - 1].hw);
+
+ memset(&init, 0, sizeof(init));
+ init.name = kasprintf(GFP_KERNEL, "%pOFn.out%d",
+ client->dev.of_node, idx + 1);
+ if (!init.name) {
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+ init.ops = &vc5_clk_out_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ init.num_parents = 2;
+ vc5->clk_out[n].num = idx;
+ vc5->clk_out[n].vc5 = vc5;
+ vc5->clk_out[n].hw.init = &init;
+ ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[n].hw);
+ if (ret)
+ goto err_clk_register;
+ kfree(init.name); /* clock framework made a copy of the name */
+
+ /* Fetch Clock Output configuration from DT (if specified) */
+ ret = vc5_get_output_config(client, &vc5->clk_out[n]);
+ if (ret)
+ goto err_clk;
+ }
+
+ ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5);
+ if (ret) {
+ dev_err_probe(&client->dev, ret,
+ "unable to add clk provider\n");
+ goto err_clk;
+ }
+
+ return 0;
+
+err_clk_register:
+ dev_err_probe(&client->dev, ret,
+ "unable to register %s\n", init.name);
+ kfree(init.name); /* clock framework made a copy of the name */
+err_clk:
+ if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)
+ clk_unregister_fixed_rate(vc5->pin_xin);
+ return ret;
+}
+
+static void vc5_remove(struct i2c_client *client)
+{
+ struct vc5_driver_data *vc5 = i2c_get_clientdata(client);
+
+ of_clk_del_provider(client->dev.of_node);
+
+ if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)
+ clk_unregister_fixed_rate(vc5->pin_xin);
+}
+
+static int __maybe_unused vc5_suspend(struct device *dev)
+{
+ struct vc5_driver_data *vc5 = dev_get_drvdata(dev);
+
+ regcache_cache_only(vc5->regmap, true);
+ regcache_mark_dirty(vc5->regmap);
+
+ return 0;
+}
+
+static int __maybe_unused vc5_resume(struct device *dev)
+{
+ struct vc5_driver_data *vc5 = dev_get_drvdata(dev);
+ int ret;
+
+ regcache_cache_only(vc5->regmap, false);
+ ret = regcache_sync(vc5->regmap);
+ if (ret)
+ dev_err(dev, "Failed to restore register map: %d\n", ret);
+ return ret;
+}
+
+static const struct vc5_chip_info idt_5p49v5923_info = {
+ .model = IDT_VC5_5P49V5923,
+ .clk_fod_cnt = 2,
+ .clk_out_cnt = 3,
+ .flags = 0,
+};
+
+static const struct vc5_chip_info idt_5p49v5925_info = {
+ .model = IDT_VC5_5P49V5925,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = 0,
+};
+
+static const struct vc5_chip_info idt_5p49v5933_info = {
+ .model = IDT_VC5_5P49V5933,
+ .clk_fod_cnt = 2,
+ .clk_out_cnt = 3,
+ .flags = VC5_HAS_INTERNAL_XTAL,
+};
+
+static const struct vc5_chip_info idt_5p49v5935_info = {
+ .model = IDT_VC5_5P49V5935,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = VC5_HAS_INTERNAL_XTAL,
+};
+
+static const struct vc5_chip_info idt_5p49v6901_info = {
+ .model = IDT_VC6_5P49V6901,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = VC5_HAS_PFD_FREQ_DBL | VC5_HAS_BYPASS_SYNC_BIT,
+};
+
+static const struct vc5_chip_info idt_5p49v6965_info = {
+ .model = IDT_VC6_5P49V6965,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = VC5_HAS_BYPASS_SYNC_BIT,
+};
+
+static const struct vc5_chip_info idt_5p49v6975_info = {
+ .model = IDT_VC6_5P49V6975,
+ .clk_fod_cnt = 4,
+ .clk_out_cnt = 5,
+ .flags = VC5_HAS_BYPASS_SYNC_BIT | VC5_HAS_INTERNAL_XTAL,
+};
+
+static const struct i2c_device_id vc5_id[] = {
+ { "5p49v5923", .driver_data = (kernel_ulong_t)&idt_5p49v5923_info },
+ { "5p49v5925", .driver_data = (kernel_ulong_t)&idt_5p49v5925_info },
+ { "5p49v5933", .driver_data = (kernel_ulong_t)&idt_5p49v5933_info },
+ { "5p49v5935", .driver_data = (kernel_ulong_t)&idt_5p49v5935_info },
+ { "5p49v6901", .driver_data = (kernel_ulong_t)&idt_5p49v6901_info },
+ { "5p49v6965", .driver_data = (kernel_ulong_t)&idt_5p49v6965_info },
+ { "5p49v6975", .driver_data = (kernel_ulong_t)&idt_5p49v6975_info },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, vc5_id);
+
+static const struct of_device_id clk_vc5_of_match[] = {
+ { .compatible = "idt,5p49v5923", .data = &idt_5p49v5923_info },
+ { .compatible = "idt,5p49v5925", .data = &idt_5p49v5925_info },
+ { .compatible = "idt,5p49v5933", .data = &idt_5p49v5933_info },
+ { .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info },
+ { .compatible = "idt,5p49v6901", .data = &idt_5p49v6901_info },
+ { .compatible = "idt,5p49v6965", .data = &idt_5p49v6965_info },
+ { .compatible = "idt,5p49v6975", .data = &idt_5p49v6975_info },
+ { },
+};
+MODULE_DEVICE_TABLE(of, clk_vc5_of_match);
+
+static SIMPLE_DEV_PM_OPS(vc5_pm_ops, vc5_suspend, vc5_resume);
+
+static struct i2c_driver vc5_driver = {
+ .driver = {
+ .name = "vc5",
+ .pm = &vc5_pm_ops,
+ .of_match_table = clk_vc5_of_match,
+ },
+ .probe_new = vc5_probe,
+ .remove = vc5_remove,
+ .id_table = vc5_id,
+};
+module_i2c_driver(vc5_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("IDT VersaClock 5 driver");
+MODULE_LICENSE("GPL");