summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/display/drm_scdc_helper.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/display/drm_scdc_helper.c')
-rw-r--r--drivers/gpu/drm/display/drm_scdc_helper.c263
1 files changed, 263 insertions, 0 deletions
diff --git a/drivers/gpu/drm/display/drm_scdc_helper.c b/drivers/gpu/drm/display/drm_scdc_helper.c
new file mode 100644
index 000000000..c3ad4ab2b
--- /dev/null
+++ b/drivers/gpu/drm/display/drm_scdc_helper.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright (c) 2015 NVIDIA Corporation. All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <drm/display/drm_scdc_helper.h>
+#include <drm/drm_print.h>
+
+/**
+ * DOC: scdc helpers
+ *
+ * Status and Control Data Channel (SCDC) is a mechanism introduced by the
+ * HDMI 2.0 specification. It is a point-to-point protocol that allows the
+ * HDMI source and HDMI sink to exchange data. The same I2C interface that
+ * is used to access EDID serves as the transport mechanism for SCDC.
+ *
+ * Note: The SCDC status is going to be lost when the display is
+ * disconnected. This can happen physically when the user disconnects
+ * the cable, but also when a display is switched on (such as waking up
+ * a TV).
+ *
+ * This is further complicated by the fact that, upon a disconnection /
+ * reconnection, KMS won't change the mode on its own. This means that
+ * one can't just rely on setting the SCDC status on enable, but also
+ * has to track the connector status changes using interrupts and
+ * restore the SCDC status. The typical solution for this is to trigger an
+ * empty modeset in drm_connector_helper_funcs.detect_ctx(), like what vc4 does
+ * in vc4_hdmi_reset_link().
+ */
+
+#define SCDC_I2C_SLAVE_ADDRESS 0x54
+
+/**
+ * drm_scdc_read - read a block of data from SCDC
+ * @adapter: I2C controller
+ * @offset: start offset of block to read
+ * @buffer: return location for the block to read
+ * @size: size of the block to read
+ *
+ * Reads a block of data from SCDC, starting at a given offset.
+ *
+ * Returns:
+ * 0 on success, negative error code on failure.
+ */
+ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
+ size_t size)
+{
+ int ret;
+ struct i2c_msg msgs[2] = {
+ {
+ .addr = SCDC_I2C_SLAVE_ADDRESS,
+ .flags = 0,
+ .len = 1,
+ .buf = &offset,
+ }, {
+ .addr = SCDC_I2C_SLAVE_ADDRESS,
+ .flags = I2C_M_RD,
+ .len = size,
+ .buf = buffer,
+ }
+ };
+
+ ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+ if (ret != ARRAY_SIZE(msgs))
+ return -EPROTO;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_scdc_read);
+
+/**
+ * drm_scdc_write - write a block of data to SCDC
+ * @adapter: I2C controller
+ * @offset: start offset of block to write
+ * @buffer: block of data to write
+ * @size: size of the block to write
+ *
+ * Writes a block of data to SCDC, starting at a given offset.
+ *
+ * Returns:
+ * 0 on success, negative error code on failure.
+ */
+ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset,
+ const void *buffer, size_t size)
+{
+ struct i2c_msg msg = {
+ .addr = SCDC_I2C_SLAVE_ADDRESS,
+ .flags = 0,
+ .len = 1 + size,
+ .buf = NULL,
+ };
+ void *data;
+ int err;
+
+ data = kmalloc(1 + size, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ msg.buf = data;
+
+ memcpy(data, &offset, sizeof(offset));
+ memcpy(data + 1, buffer, size);
+
+ err = i2c_transfer(adapter, &msg, 1);
+
+ kfree(data);
+
+ if (err < 0)
+ return err;
+ if (err != 1)
+ return -EPROTO;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_scdc_write);
+
+/**
+ * drm_scdc_get_scrambling_status - what is status of scrambling?
+ * @adapter: I2C adapter for DDC channel
+ *
+ * Reads the scrambler status over SCDC, and checks the
+ * scrambling status.
+ *
+ * Returns:
+ * True if the scrambling is enabled, false otherwise.
+ */
+bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter)
+{
+ u8 status;
+ int ret;
+
+ ret = drm_scdc_readb(adapter, SCDC_SCRAMBLER_STATUS, &status);
+ if (ret < 0) {
+ DRM_DEBUG_KMS("Failed to read scrambling status: %d\n", ret);
+ return false;
+ }
+
+ return status & SCDC_SCRAMBLING_STATUS;
+}
+EXPORT_SYMBOL(drm_scdc_get_scrambling_status);
+
+/**
+ * drm_scdc_set_scrambling - enable scrambling
+ * @adapter: I2C adapter for DDC channel
+ * @enable: bool to indicate if scrambling is to be enabled/disabled
+ *
+ * Writes the TMDS config register over SCDC channel, and:
+ * enables scrambling when enable = 1
+ * disables scrambling when enable = 0
+ *
+ * Returns:
+ * True if scrambling is set/reset successfully, false otherwise.
+ */
+bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
+{
+ u8 config;
+ int ret;
+
+ ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
+ if (ret < 0) {
+ DRM_DEBUG_KMS("Failed to read TMDS config: %d\n", ret);
+ return false;
+ }
+
+ if (enable)
+ config |= SCDC_SCRAMBLING_ENABLE;
+ else
+ config &= ~SCDC_SCRAMBLING_ENABLE;
+
+ ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
+ if (ret < 0) {
+ DRM_DEBUG_KMS("Failed to enable scrambling: %d\n", ret);
+ return false;
+ }
+
+ return true;
+}
+EXPORT_SYMBOL(drm_scdc_set_scrambling);
+
+/**
+ * drm_scdc_set_high_tmds_clock_ratio - set TMDS clock ratio
+ * @adapter: I2C adapter for DDC channel
+ * @set: ret or reset the high clock ratio
+ *
+ *
+ * TMDS clock ratio calculations go like this:
+ * TMDS character = 10 bit TMDS encoded value
+ *
+ * TMDS character rate = The rate at which TMDS characters are
+ * transmitted (Mcsc)
+ *
+ * TMDS bit rate = 10x TMDS character rate
+ *
+ * As per the spec:
+ * TMDS clock rate for pixel clock < 340 MHz = 1x the character
+ * rate = 1/10 pixel clock rate
+ *
+ * TMDS clock rate for pixel clock > 340 MHz = 0.25x the character
+ * rate = 1/40 pixel clock rate
+ *
+ * Writes to the TMDS config register over SCDC channel, and:
+ * sets TMDS clock ratio to 1/40 when set = 1
+ *
+ * sets TMDS clock ratio to 1/10 when set = 0
+ *
+ * Returns:
+ * True if write is successful, false otherwise.
+ */
+bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
+{
+ u8 config;
+ int ret;
+
+ ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
+ if (ret < 0) {
+ DRM_DEBUG_KMS("Failed to read TMDS config: %d\n", ret);
+ return false;
+ }
+
+ if (set)
+ config |= SCDC_TMDS_BIT_CLOCK_RATIO_BY_40;
+ else
+ config &= ~SCDC_TMDS_BIT_CLOCK_RATIO_BY_40;
+
+ ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
+ if (ret < 0) {
+ DRM_DEBUG_KMS("Failed to set TMDS clock ratio: %d\n", ret);
+ return false;
+ }
+
+ /*
+ * The spec says that a source should wait minimum 1ms and maximum
+ * 100ms after writing the TMDS config for clock ratio. Lets allow a
+ * wait of up to 2ms here.
+ */
+ usleep_range(1000, 2000);
+ return true;
+}
+EXPORT_SYMBOL(drm_scdc_set_high_tmds_clock_ratio);