diff options
Diffstat (limited to 'drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h')
-rw-r--r-- | drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 403 |
1 files changed, 403 insertions, 0 deletions
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h new file mode 100644 index 000000000..f2af07d87 --- /dev/null +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h @@ -0,0 +1,403 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2015-2018 The Linux Foundation. All rights reserved. + */ + +#ifndef __DPU_ENCODER_PHYS_H__ +#define __DPU_ENCODER_PHYS_H__ + +#include <drm/drm_writeback.h> +#include <linux/jiffies.h> + +#include "dpu_kms.h" +#include "dpu_hw_intf.h" +#include "dpu_hw_wb.h" +#include "dpu_hw_pingpong.h" +#include "dpu_hw_ctl.h" +#include "dpu_hw_top.h" +#include "dpu_encoder.h" +#include "dpu_crtc.h" + +#define DPU_ENCODER_NAME_MAX 16 + +/* wait for at most 2 vsync for lowest refresh rate (24hz) */ +#define KICKOFF_TIMEOUT_MS 84 +#define KICKOFF_TIMEOUT_JIFFIES msecs_to_jiffies(KICKOFF_TIMEOUT_MS) + +/** + * enum dpu_enc_split_role - Role this physical encoder will play in a + * split-panel configuration, where one panel is master, and others slaves. + * Masters have extra responsibilities, like managing the VBLANK IRQ. + * @ENC_ROLE_SOLO: This is the one and only panel. This encoder is master. + * @ENC_ROLE_MASTER: This encoder is the master of a split panel config. + * @ENC_ROLE_SLAVE: This encoder is not the master of a split panel config. + */ +enum dpu_enc_split_role { + ENC_ROLE_SOLO, + ENC_ROLE_MASTER, + ENC_ROLE_SLAVE, +}; + +/** + * enum dpu_enc_enable_state - current enabled state of the physical encoder + * @DPU_ENC_DISABLING: Encoder transitioning to disable state + * Events bounding transition are encoder type specific + * @DPU_ENC_DISABLED: Encoder is disabled + * @DPU_ENC_ENABLING: Encoder transitioning to enabled + * Events bounding transition are encoder type specific + * @DPU_ENC_ENABLED: Encoder is enabled + * @DPU_ENC_ERR_NEEDS_HW_RESET: Encoder is enabled, but requires a hw_reset + * to recover from a previous error + */ +enum dpu_enc_enable_state { + DPU_ENC_DISABLING, + DPU_ENC_DISABLED, + DPU_ENC_ENABLING, + DPU_ENC_ENABLED, + DPU_ENC_ERR_NEEDS_HW_RESET +}; + +struct dpu_encoder_phys; + +/** + * struct dpu_encoder_virt_ops - Interface the containing virtual encoder + * provides for the physical encoders to use to callback. + * @handle_vblank_virt: Notify virtual encoder of vblank IRQ reception + * Note: This is called from IRQ handler context. + * @handle_underrun_virt: Notify virtual encoder of underrun IRQ reception + * Note: This is called from IRQ handler context. + * @handle_frame_done: Notify virtual encoder that this phys encoder + * completes last request frame. + */ +struct dpu_encoder_virt_ops { + void (*handle_vblank_virt)(struct drm_encoder *, + struct dpu_encoder_phys *phys); + void (*handle_underrun_virt)(struct drm_encoder *, + struct dpu_encoder_phys *phys); + void (*handle_frame_done)(struct drm_encoder *, + struct dpu_encoder_phys *phys, u32 event); +}; + +/** + * struct dpu_encoder_phys_ops - Interface the physical encoders provide to + * the containing virtual encoder. + * @late_register: DRM Call. Add Userspace interfaces, debugfs. + * @prepare_commit: MSM Atomic Call, start of atomic commit sequence + * @is_master: Whether this phys_enc is the current master + * encoder. Can be switched at enable time. Based + * on split_role and current mode (CMD/VID). + * @atomic_mode_set: DRM Call. Set a DRM mode. + * This likely caches the mode, for use at enable. + * @enable: DRM Call. Enable a DRM mode. + * @disable: DRM Call. Disable mode. + * @atomic_check: DRM Call. Atomic check new DRM state. + * @destroy: DRM Call. Destroy and release resources. + * @control_vblank_irq Register/Deregister for VBLANK IRQ + * @wait_for_commit_done: Wait for hardware to have flushed the + * current pending frames to hardware + * @wait_for_tx_complete: Wait for hardware to transfer the pixels + * to the panel + * @wait_for_vblank: Wait for VBLANK, for sub-driver internal use + * @prepare_for_kickoff: Do any work necessary prior to a kickoff + * For CMD encoder, may wait for previous tx done + * @handle_post_kickoff: Do any work necessary post-kickoff work + * @trigger_start: Process start event on physical encoder + * @needs_single_flush: Whether encoder slaves need to be flushed + * @irq_control: Handler to enable/disable all the encoder IRQs + * @prepare_idle_pc: phys encoder can update the vsync_enable status + * on idle power collapse prepare + * @restore: Restore all the encoder configs. + * @get_line_count: Obtain current vertical line count + */ + +struct dpu_encoder_phys_ops { + int (*late_register)(struct dpu_encoder_phys *encoder, + struct dentry *debugfs_root); + void (*prepare_commit)(struct dpu_encoder_phys *encoder); + bool (*is_master)(struct dpu_encoder_phys *encoder); + void (*atomic_mode_set)(struct dpu_encoder_phys *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state); + void (*enable)(struct dpu_encoder_phys *encoder); + void (*disable)(struct dpu_encoder_phys *encoder); + int (*atomic_check)(struct dpu_encoder_phys *encoder, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state); + void (*destroy)(struct dpu_encoder_phys *encoder); + int (*control_vblank_irq)(struct dpu_encoder_phys *enc, bool enable); + int (*wait_for_commit_done)(struct dpu_encoder_phys *phys_enc); + int (*wait_for_tx_complete)(struct dpu_encoder_phys *phys_enc); + int (*wait_for_vblank)(struct dpu_encoder_phys *phys_enc); + void (*prepare_for_kickoff)(struct dpu_encoder_phys *phys_enc); + void (*handle_post_kickoff)(struct dpu_encoder_phys *phys_enc); + void (*trigger_start)(struct dpu_encoder_phys *phys_enc); + bool (*needs_single_flush)(struct dpu_encoder_phys *phys_enc); + void (*irq_control)(struct dpu_encoder_phys *phys, bool enable); + void (*prepare_idle_pc)(struct dpu_encoder_phys *phys_enc); + void (*restore)(struct dpu_encoder_phys *phys); + int (*get_line_count)(struct dpu_encoder_phys *phys); + int (*get_frame_count)(struct dpu_encoder_phys *phys); + void (*prepare_wb_job)(struct dpu_encoder_phys *phys_enc, + struct drm_writeback_job *job); + void (*cleanup_wb_job)(struct dpu_encoder_phys *phys_enc, + struct drm_writeback_job *job); + bool (*is_valid_for_commit)(struct dpu_encoder_phys *phys_enc); +}; + +/** + * enum dpu_intr_idx - dpu encoder interrupt index + * @INTR_IDX_VSYNC: Vsync interrupt for video mode panel + * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel + * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel + * @INTR_IDX_RDPTR: Readpointer done unterrupt for cmd mode panel + * @INTR_IDX_WB_DONE: Writeback fone interrupt for virtual connector + */ +enum dpu_intr_idx { + INTR_IDX_VSYNC, + INTR_IDX_PINGPONG, + INTR_IDX_UNDERRUN, + INTR_IDX_CTL_START, + INTR_IDX_RDPTR, + INTR_IDX_WB_DONE, + INTR_IDX_MAX, +}; + +/** + * struct dpu_encoder_phys - physical encoder that drives a single INTF block + * tied to a specific panel / sub-panel. Abstract type, sub-classed by + * phys_vid or phys_cmd for video mode or command mode encs respectively. + * @parent: Pointer to the containing virtual encoder + * @ops: Operations exposed to the virtual encoder + * @parent_ops: Callbacks exposed by the parent to the phys_enc + * @hw_mdptop: Hardware interface to the top registers + * @hw_ctl: Hardware interface to the ctl registers + * @hw_pp: Hardware interface to the ping pong registers + * @hw_intf: Hardware interface to the intf registers + * @hw_wb: Hardware interface to the wb registers + * @dpu_kms: Pointer to the dpu_kms top level + * @cached_mode: DRM mode cached at mode_set time, acted on in enable + * @enabled: Whether the encoder has enabled and running a mode + * @split_role: Role to play in a split-panel configuration + * @intf_mode: Interface mode + * @intf_idx: Interface index on dpu hardware + * @wb_idx: Writeback index on dpu hardware + * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes + * @enable_state: Enable state tracking + * @vblank_refcount: Reference count of vblank request + * @vsync_cnt: Vsync count for the physical encoder + * @underrun_cnt: Underrun count for the physical encoder + * @pending_kickoff_cnt: Atomic counter tracking the number of kickoffs + * vs. the number of done/vblank irqs. Should hover + * between 0-2 Incremented when a new kickoff is + * scheduled. Decremented in irq handler + * @pending_ctlstart_cnt: Atomic counter tracking the number of ctl start + * pending. + * @pending_kickoff_wq: Wait queue for blocking until kickoff completes + * @irq: IRQ indices + */ +struct dpu_encoder_phys { + struct drm_encoder *parent; + struct dpu_encoder_phys_ops ops; + const struct dpu_encoder_virt_ops *parent_ops; + struct dpu_hw_mdp *hw_mdptop; + struct dpu_hw_ctl *hw_ctl; + struct dpu_hw_pingpong *hw_pp; + struct dpu_hw_intf *hw_intf; + struct dpu_hw_wb *hw_wb; + struct dpu_kms *dpu_kms; + struct drm_display_mode cached_mode; + enum dpu_enc_split_role split_role; + enum dpu_intf_mode intf_mode; + enum dpu_intf intf_idx; + enum dpu_wb wb_idx; + spinlock_t *enc_spinlock; + enum dpu_enc_enable_state enable_state; + atomic_t vblank_refcount; + atomic_t vsync_cnt; + atomic_t underrun_cnt; + atomic_t pending_ctlstart_cnt; + atomic_t pending_kickoff_cnt; + wait_queue_head_t pending_kickoff_wq; + int irq[INTR_IDX_MAX]; +}; + +static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys) +{ + atomic_inc_return(&phys->pending_ctlstart_cnt); + return atomic_inc_return(&phys->pending_kickoff_cnt); +} + +/** + * struct dpu_encoder_phys_wb - sub-class of dpu_encoder_phys to handle command + * mode specific operations + * @base: Baseclass physical encoder structure + * @wbirq_refcount: Reference count of writeback interrupt + * @wb_done_timeout_cnt: number of wb done irq timeout errors + * @wb_cfg: writeback block config to store fb related details + * @wb_conn: backpointer to writeback connector + * @wb_job: backpointer to current writeback job + * @dest: dpu buffer layout for current writeback output buffer + */ +struct dpu_encoder_phys_wb { + struct dpu_encoder_phys base; + atomic_t wbirq_refcount; + int wb_done_timeout_cnt; + struct dpu_hw_wb_cfg wb_cfg; + struct drm_writeback_connector *wb_conn; + struct drm_writeback_job *wb_job; + struct dpu_hw_fmt_layout dest; +}; + +/** + * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command + * mode specific operations + * @base: Baseclass physical encoder structure + * @intf_idx: Intf Block index used by this phys encoder + * @stream_sel: Stream selection for multi-stream interfaces + * @serialize_wait4pp: serialize wait4pp feature waits for pp_done interrupt + * after ctl_start instead of before next frame kickoff + * @pp_timeout_report_cnt: number of pingpong done irq timeout errors + * @pending_vblank_cnt: Atomic counter tracking pending wait for VBLANK + * @pending_vblank_wq: Wait queue for blocking until VBLANK received + */ +struct dpu_encoder_phys_cmd { + struct dpu_encoder_phys base; + int stream_sel; + bool serialize_wait4pp; + int pp_timeout_report_cnt; + atomic_t pending_vblank_cnt; + wait_queue_head_t pending_vblank_wq; +}; + +/** + * struct dpu_enc_phys_init_params - initialization parameters for phys encs + * @dpu_kms: Pointer to the dpu_kms top level + * @parent: Pointer to the containing virtual encoder + * @parent_ops: Callbacks exposed by the parent to the phys_enc + * @split_role: Role to play in a split-panel configuration + * @intf_idx: Interface index this phys_enc will control + * @wb_idx: Writeback index this phys_enc will control + * @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes + */ +struct dpu_enc_phys_init_params { + struct dpu_kms *dpu_kms; + struct drm_encoder *parent; + const struct dpu_encoder_virt_ops *parent_ops; + enum dpu_enc_split_role split_role; + enum dpu_intf intf_idx; + enum dpu_wb wb_idx; + spinlock_t *enc_spinlock; +}; + +/** + * dpu_encoder_wait_info - container for passing arguments to irq wait functions + * @wq: wait queue structure + * @atomic_cnt: wait until atomic_cnt equals zero + * @timeout_ms: timeout value in milliseconds + */ +struct dpu_encoder_wait_info { + wait_queue_head_t *wq; + atomic_t *atomic_cnt; + s64 timeout_ms; +}; + +/** + * dpu_encoder_phys_vid_init - Construct a new video mode physical encoder + * @p: Pointer to init params structure + * Return: Error code or newly allocated encoder + */ +struct dpu_encoder_phys *dpu_encoder_phys_vid_init( + struct dpu_enc_phys_init_params *p); + +/** + * dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder + * @p: Pointer to init params structure + * Return: Error code or newly allocated encoder + */ +struct dpu_encoder_phys *dpu_encoder_phys_cmd_init( + struct dpu_enc_phys_init_params *p); + +/** + * dpu_encoder_phys_wb_init - initialize writeback encoder + * @init: Pointer to init info structure with initialization params + */ +struct dpu_encoder_phys *dpu_encoder_phys_wb_init( + struct dpu_enc_phys_init_params *p); + +/** + * dpu_encoder_helper_trigger_start - control start helper function + * This helper function may be optionally specified by physical + * encoders if they require ctl_start triggering. + * @phys_enc: Pointer to physical encoder structure + */ +void dpu_encoder_helper_trigger_start(struct dpu_encoder_phys *phys_enc); + +static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode( + struct dpu_encoder_phys *phys_enc) +{ + struct dpu_crtc_state *dpu_cstate; + + if (!phys_enc || phys_enc->enable_state == DPU_ENC_DISABLING) + return BLEND_3D_NONE; + + dpu_cstate = to_dpu_crtc_state(phys_enc->parent->crtc->state); + + /* Use merge_3d unless DSC MERGE topology is used */ + if (phys_enc->split_role == ENC_ROLE_SOLO && + dpu_cstate->num_mixers == CRTC_DUAL_MIXERS && + !dpu_encoder_use_dsc_merge(phys_enc->parent)) + return BLEND_3D_H_ROW_INT; + + return BLEND_3D_NONE; +} + +/** + * dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder + * This helper function is used by physical encoder to get DSC blocks mask + * used for this encoder. + * @phys_enc: Pointer to physical encoder structure + */ +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc); + +/** + * dpu_encoder_helper_split_config - split display configuration helper function + * This helper function may be used by physical encoders to configure + * the split display related registers. + * @phys_enc: Pointer to physical encoder structure + * @interface: enum dpu_intf setting + */ +void dpu_encoder_helper_split_config( + struct dpu_encoder_phys *phys_enc, + enum dpu_intf interface); + +/** + * dpu_encoder_helper_report_irq_timeout - utility to report error that irq has + * timed out, including reporting frame error event to crtc and debug dump + * @phys_enc: Pointer to physical encoder structure + * @intr_idx: Failing interrupt index + */ +void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys *phys_enc, + enum dpu_intr_idx intr_idx); + +/** + * dpu_encoder_helper_wait_for_irq - utility to wait on an irq. + * note: will call dpu_encoder_helper_wait_for_irq on timeout + * @phys_enc: Pointer to physical encoder structure + * @irq: IRQ index + * @func: IRQ callback to be called in case of timeout + * @wait_info: wait info struct + * @Return: 0 or -ERROR + */ +int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, + int irq, + void (*func)(void *arg, int irq_idx), + struct dpu_encoder_wait_info *wait_info); + +/** + * dpu_encoder_helper_phys_cleanup - helper to cleanup dpu pipeline + * @phys_enc: Pointer to physical encoder structure + */ +void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc); + +#endif /* __dpu_encoder_phys_H__ */ |