summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/panel/panel-sitronix-st7703.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/panel/panel-sitronix-st7703.c')
-rw-r--r--drivers/gpu/drm/panel/panel-sitronix-st7703.c638
1 files changed, 638 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
new file mode 100644
index 000000000..b6e514aab
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for panels based on Sitronix ST7703 controller, souch as:
+ *
+ * - Rocktech jh057n00900 5.5" MIPI-DSI panel
+ *
+ * Copyright (C) Purism SPC 2019
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/display_timing.h>
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define DRV_NAME "panel-sitronix-st7703"
+
+/* Manufacturer specific Commands send via DSI */
+#define ST7703_CMD_ALL_PIXEL_OFF 0x22
+#define ST7703_CMD_ALL_PIXEL_ON 0x23
+#define ST7703_CMD_SETDISP 0xB2
+#define ST7703_CMD_SETRGBIF 0xB3
+#define ST7703_CMD_SETCYC 0xB4
+#define ST7703_CMD_SETBGP 0xB5
+#define ST7703_CMD_SETVCOM 0xB6
+#define ST7703_CMD_SETOTP 0xB7
+#define ST7703_CMD_SETPOWER_EXT 0xB8
+#define ST7703_CMD_SETEXTC 0xB9
+#define ST7703_CMD_SETMIPI 0xBA
+#define ST7703_CMD_SETVDC 0xBC
+#define ST7703_CMD_UNKNOWN_BF 0xBF
+#define ST7703_CMD_SETSCR 0xC0
+#define ST7703_CMD_SETPOWER 0xC1
+#define ST7703_CMD_SETPANEL 0xCC
+#define ST7703_CMD_UNKNOWN_C6 0xC6
+#define ST7703_CMD_SETGAMMA 0xE0
+#define ST7703_CMD_SETEQ 0xE3
+#define ST7703_CMD_SETGIP1 0xE9
+#define ST7703_CMD_SETGIP2 0xEA
+
+struct st7703 {
+ struct device *dev;
+ struct drm_panel panel;
+ struct gpio_desc *reset_gpio;
+ struct regulator *vcc;
+ struct regulator *iovcc;
+ bool prepared;
+
+ struct dentry *debugfs;
+ const struct st7703_panel_desc *desc;
+};
+
+struct st7703_panel_desc {
+ const struct drm_display_mode *mode;
+ unsigned int lanes;
+ unsigned long mode_flags;
+ enum mipi_dsi_pixel_format format;
+ int (*init_sequence)(struct st7703 *ctx);
+};
+
+static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
+{
+ return container_of(panel, struct st7703, panel);
+}
+
+#define dsi_generic_write_seq(dsi, seq...) do { \
+ static const u8 d[] = { seq }; \
+ int ret; \
+ ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+static int jh057n_init_sequence(struct st7703 *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ /*
+ * Init sequence was supplied by the panel vendor. Most of the commands
+ * resemble the ST7703 but the number of parameters often don't match
+ * so it's likely a clone.
+ */
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
+ 0xF1, 0x12, 0x83);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
+ 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
+ 0x00, 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
+ 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
+ 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
+ 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
+ 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
+ msleep(20);
+
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
+ dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
+ 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
+ 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+ 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
+ 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
+ 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
+ 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
+ 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
+ 0xA5, 0x00, 0x00, 0x00, 0x00);
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
+ 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
+ 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
+ 0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
+ 0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
+ 0x11, 0x18);
+
+ return 0;
+}
+
+static const struct drm_display_mode jh057n00900_mode = {
+ .hdisplay = 720,
+ .hsync_start = 720 + 90,
+ .hsync_end = 720 + 90 + 20,
+ .htotal = 720 + 90 + 20 + 20,
+ .vdisplay = 1440,
+ .vsync_start = 1440 + 20,
+ .vsync_end = 1440 + 20 + 4,
+ .vtotal = 1440 + 20 + 4 + 12,
+ .clock = 75276,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .width_mm = 65,
+ .height_mm = 130,
+};
+
+static const struct st7703_panel_desc jh057n00900_panel_desc = {
+ .mode = &jh057n00900_mode,
+ .lanes = 4,
+ .mode_flags = MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+ .format = MIPI_DSI_FMT_RGB888,
+ .init_sequence = jh057n_init_sequence,
+};
+
+#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
+ static const u8 d[] = { seq }; \
+ int ret; \
+ ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+
+static int xbd599_init_sequence(struct st7703 *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ /*
+ * Init sequence was supplied by the panel vendor.
+ */
+
+ /* Magic sequence to unlock user commands below. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
+
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
+ 0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */
+ 0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */
+ 0x05, /* IHSRX = x6 (Low High Speed driving ability) */
+ 0xF9, /* TX_CLK_SEL = fDSICLK/16 */
+ 0x0E, /* HFP_OSC (min. HFP number in DSI mode) */
+ 0x0E, /* HBP_OSC (min. HBP number in DSI mode) */
+ /* The rest is undocumented in ST7703 datasheet */
+ 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02,
+ 0x4F, 0x11, 0x00, 0x00, 0x37);
+
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
+ 0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */
+ 0x22, /* DT = 15ms XDK_ECP = x2 */
+ 0x20, /* PFM_DC_DIV = /1 */
+ 0x03 /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */);
+
+ /* RGB I/F porch timing */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
+ 0x10, /* VBP_RGB_GEN */
+ 0x10, /* VFP_RGB_GEN */
+ 0x05, /* DE_BP_RGB_GEN */
+ 0x05, /* DE_FP_RGB_GEN */
+ /* The rest is undocumented in ST7703 datasheet */
+ 0x03, 0xFF,
+ 0x00, 0x00,
+ 0x00, 0x00);
+
+ /* Source driving settings. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
+ 0x73, /* N_POPON */
+ 0x73, /* N_NOPON */
+ 0x50, /* I_POPON */
+ 0x50, /* I_NOPON */
+ 0x00, /* SCR[31,24] */
+ 0xC0, /* SCR[23,16] */
+ 0x08, /* SCR[15,8] */
+ 0x70, /* SCR[7,0] */
+ 0x00 /* Undocumented */);
+
+ /* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
+
+ /*
+ * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan)
+ * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR)
+ */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
+
+ /* Zig-Zag Type C column inversion. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+
+ /* Set display resolution. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
+ 0xF0, /* NL = 240 */
+ 0x12, /* RES_V_LSB = 0, BLK_CON = VSSD,
+ * RESO_SEL = 720RGB
+ */
+ 0xF0 /* WHITE_GND_EN = 1 (GND),
+ * WHITE_FRAME_SEL = 7 frames,
+ * ISC = 0 frames
+ */);
+
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
+ 0x00, /* PNOEQ */
+ 0x00, /* NNOEQ */
+ 0x0B, /* PEQGND */
+ 0x0B, /* NEQGND */
+ 0x10, /* PEQVCI */
+ 0x10, /* NEQVCI */
+ 0x00, /* PEQVCI1 */
+ 0x00, /* NEQVCI1 */
+ 0x00, /* reserved */
+ 0x00, /* reserved */
+ 0xFF, /* reserved */
+ 0x00, /* reserved */
+ 0xC0, /* ESD_DET_DATA_WHITE = 1, ESD_WHITE_EN = 1 */
+ 0x10 /* SLPIN_OPTION = 1 (no need vsync after sleep-in)
+ * VEDIO_NO_CHECK_EN = 0
+ * ESD_WHITE_GND_EN = 0
+ * ESD_DET_TIME_SEL = 0 frames
+ */);
+
+ /* Undocumented command. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
+ 0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
+ 0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */
+ 0x32, /* VRP */
+ 0x32, /* VRN */
+ 0x77, /* reserved */
+ 0xF1, /* APS = 1 (small),
+ * VGL_DET_EN = 1, VGH_DET_EN = 1,
+ * VGL_TURBO = 1, VGH_TURBO = 1
+ */
+ 0xFF, /* VGH1_L_DIV, VGL1_L_DIV (1.5MHz) */
+ 0xFF, /* VGH1_R_DIV, VGL1_R_DIV (1.5MHz) */
+ 0xCC, /* VGH2_L_DIV, VGL2_L_DIV (2.6MHz) */
+ 0xCC, /* VGH2_R_DIV, VGL2_R_DIV (2.6MHz) */
+ 0x77, /* VGH3_L_DIV, VGL3_L_DIV (4.5MHz) */
+ 0x77 /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */);
+
+ /* Reference voltage. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
+ 0x07, /* VREF_SEL = 4.2V */
+ 0x07 /* NVREF_SEL = 4.2V */);
+ msleep(20);
+
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
+ 0x2C, /* VCOMDC_F = -0.67V */
+ 0x2C /* VCOMDC_B = -0.67V */);
+
+ /* Undocumented command. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+
+ /* This command is to set forward GIP timing. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
+ 0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
+ 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
+ 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
+ 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
+ 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+
+ /* This command is to set backward GIP timing. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
+ 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
+ 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
+ 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
+ 0xA5, 0x00, 0x00, 0x00, 0x00);
+
+ /* Adjust the gamma characteristics of the panel. */
+ dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
+ 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
+ 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
+ 0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
+ 0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
+ 0x12, 0x18);
+
+ return 0;
+}
+
+static const struct drm_display_mode xbd599_mode = {
+ .hdisplay = 720,
+ .hsync_start = 720 + 40,
+ .hsync_end = 720 + 40 + 40,
+ .htotal = 720 + 40 + 40 + 40,
+ .vdisplay = 1440,
+ .vsync_start = 1440 + 18,
+ .vsync_end = 1440 + 18 + 10,
+ .vtotal = 1440 + 18 + 10 + 17,
+ .clock = 69000,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .width_mm = 68,
+ .height_mm = 136,
+};
+
+static const struct st7703_panel_desc xbd599_desc = {
+ .mode = &xbd599_mode,
+ .lanes = 4,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+ .format = MIPI_DSI_FMT_RGB888,
+ .init_sequence = xbd599_init_sequence,
+};
+
+static int st7703_enable(struct drm_panel *panel)
+{
+ struct st7703 *ctx = panel_to_st7703(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ int ret;
+
+ ret = ctx->desc->init_sequence(ctx);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
+ return ret;
+ }
+
+ msleep(20);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+ return ret;
+ }
+
+ /* Panel is operational 120 msec after reset */
+ msleep(60);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret)
+ return ret;
+
+ dev_dbg(ctx->dev, "Panel init sequence done\n");
+
+ return 0;
+}
+
+static int st7703_disable(struct drm_panel *panel)
+{
+ struct st7703 *ctx = panel_to_st7703(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ int ret;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0)
+ dev_err(ctx->dev, "Failed to turn off the display: %d\n", ret);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0)
+ dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret);
+
+ return 0;
+}
+
+static int st7703_unprepare(struct drm_panel *panel)
+{
+ struct st7703 *ctx = panel_to_st7703(panel);
+
+ if (!ctx->prepared)
+ return 0;
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_disable(ctx->iovcc);
+ regulator_disable(ctx->vcc);
+ ctx->prepared = false;
+
+ return 0;
+}
+
+static int st7703_prepare(struct drm_panel *panel)
+{
+ struct st7703 *ctx = panel_to_st7703(panel);
+ int ret;
+
+ if (ctx->prepared)
+ return 0;
+
+ dev_dbg(ctx->dev, "Resetting the panel\n");
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+ ret = regulator_enable(ctx->iovcc);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_enable(ctx->vcc);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Failed to enable vcc supply: %d\n", ret);
+ regulator_disable(ctx->iovcc);
+ return ret;
+ }
+
+ /* Give power supplies time to stabilize before deasserting reset. */
+ usleep_range(10000, 20000);
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(15000, 20000);
+
+ ctx->prepared = true;
+
+ return 0;
+}
+
+static const u32 mantix_bus_formats[] = {
+ MEDIA_BUS_FMT_RGB888_1X24,
+};
+
+static int st7703_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct st7703 *ctx = panel_to_st7703(panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
+ if (!mode) {
+ dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+ ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+ drm_mode_vrefresh(ctx->desc->mode));
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(connector, mode);
+
+ drm_display_info_set_bus_formats(&connector->display_info,
+ mantix_bus_formats,
+ ARRAY_SIZE(mantix_bus_formats));
+
+ return 1;
+}
+
+static const struct drm_panel_funcs st7703_drm_funcs = {
+ .disable = st7703_disable,
+ .unprepare = st7703_unprepare,
+ .prepare = st7703_prepare,
+ .enable = st7703_enable,
+ .get_modes = st7703_get_modes,
+};
+
+static int allpixelson_set(void *data, u64 val)
+{
+ struct st7703 *ctx = data;
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ dev_dbg(ctx->dev, "Setting all pixels on\n");
+ dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
+ msleep(val * 1000);
+ /* Reset the panel to get video back */
+ drm_panel_disable(&ctx->panel);
+ drm_panel_unprepare(&ctx->panel);
+ drm_panel_prepare(&ctx->panel);
+ drm_panel_enable(&ctx->panel);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
+ allpixelson_set, "%llu\n");
+
+static void st7703_debugfs_init(struct st7703 *ctx)
+{
+ ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
+
+ debugfs_create_file("allpixelson", 0600, ctx->debugfs, ctx,
+ &allpixelson_fops);
+}
+
+static void st7703_debugfs_remove(struct st7703 *ctx)
+{
+ debugfs_remove_recursive(ctx->debugfs);
+ ctx->debugfs = NULL;
+}
+
+static int st7703_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct st7703 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "Failed to get reset gpio\n");
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+ ctx->desc = of_device_get_match_data(dev);
+
+ dsi->mode_flags = ctx->desc->mode_flags;
+ dsi->format = ctx->desc->format;
+ dsi->lanes = ctx->desc->lanes;
+
+ ctx->vcc = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(ctx->vcc))
+ return dev_err_probe(dev, PTR_ERR(ctx->vcc), "Failed to request vcc regulator\n");
+
+ ctx->iovcc = devm_regulator_get(dev, "iovcc");
+ if (IS_ERR(ctx->iovcc))
+ return dev_err_probe(dev, PTR_ERR(ctx->iovcc),
+ "Failed to request iovcc regulator\n");
+
+ drm_panel_init(&ctx->panel, dev, &st7703_drm_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&ctx->panel);
+ if (ret)
+ return ret;
+
+ drm_panel_add(&ctx->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ dev_err(dev, "mipi_dsi_attach failed (%d). Is host ready?\n", ret);
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ dev_info(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+ ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+ drm_mode_vrefresh(ctx->desc->mode),
+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+ st7703_debugfs_init(ctx);
+ return 0;
+}
+
+static void st7703_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = drm_panel_unprepare(&ctx->panel);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
+
+ ret = drm_panel_disable(&ctx->panel);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
+}
+
+static void st7703_remove(struct mipi_dsi_device *dsi)
+{
+ struct st7703 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ st7703_shutdown(dsi);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_remove(&ctx->panel);
+
+ st7703_debugfs_remove(ctx);
+}
+
+static const struct of_device_id st7703_of_match[] = {
+ { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
+ { .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st7703_of_match);
+
+static struct mipi_dsi_driver st7703_driver = {
+ .probe = st7703_probe,
+ .remove = st7703_remove,
+ .shutdown = st7703_shutdown,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = st7703_of_match,
+ },
+};
+module_mipi_dsi_driver(st7703_driver);
+
+MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
+MODULE_DESCRIPTION("DRM driver for Sitronix ST7703 based MIPI DSI panels");
+MODULE_LICENSE("GPL v2");