diff options
Diffstat (limited to 'drivers/gpu/drm/radeon/atombios.h')
| -rw-r--r-- | drivers/gpu/drm/radeon/atombios.h | 7981 |
1 files changed, 7981 insertions, 0 deletions
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h new file mode 100644 index 000000000..da35a970f --- /dev/null +++ b/drivers/gpu/drm/radeon/atombios.h @@ -0,0 +1,7981 @@ +/* + * Copyright 2006-2007 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + + +/****************************************************************************/ +/*Portion I: Definitions shared between VBIOS and Driver */ +/****************************************************************************/ + + +#ifndef _ATOMBIOS_H +#define _ATOMBIOS_H + +#define ATOM_VERSION_MAJOR 0x00020000 +#define ATOM_VERSION_MINOR 0x00000002 + +#define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR) + +/* Endianness should be specified before inclusion, + * default to little endian + */ +#ifndef ATOM_BIG_ENDIAN +#error Endian not specified +#endif + +#ifdef _H2INC + #ifndef ULONG + typedef unsigned long ULONG; + #endif + + #ifndef UCHAR + typedef unsigned char UCHAR; + #endif + + #ifndef USHORT + typedef unsigned short USHORT; + #endif +#endif + +#define ATOM_DAC_A 0 +#define ATOM_DAC_B 1 +#define ATOM_EXT_DAC 2 + +#define ATOM_CRTC1 0 +#define ATOM_CRTC2 1 +#define ATOM_CRTC3 2 +#define ATOM_CRTC4 3 +#define ATOM_CRTC5 4 +#define ATOM_CRTC6 5 +#define ATOM_CRTC_INVALID 0xFF + +#define ATOM_DIGA 0 +#define ATOM_DIGB 1 + +#define ATOM_PPLL1 0 +#define ATOM_PPLL2 1 +#define ATOM_DCPLL 2 +#define ATOM_PPLL0 2 +#define ATOM_PPLL3 3 + +#define ATOM_EXT_PLL1 8 +#define ATOM_EXT_PLL2 9 +#define ATOM_EXT_CLOCK 10 +#define ATOM_PPLL_INVALID 0xFF + +#define ENCODER_REFCLK_SRC_P1PLL 0 +#define ENCODER_REFCLK_SRC_P2PLL 1 +#define ENCODER_REFCLK_SRC_DCPLL 2 +#define ENCODER_REFCLK_SRC_EXTCLK 3 +#define ENCODER_REFCLK_SRC_INVALID 0xFF + +#define ATOM_SCALER1 0 +#define ATOM_SCALER2 1 + +#define ATOM_SCALER_DISABLE 0 +#define ATOM_SCALER_CENTER 1 +#define ATOM_SCALER_EXPANSION 2 +#define ATOM_SCALER_MULTI_EX 3 + +#define ATOM_DISABLE 0 +#define ATOM_ENABLE 1 +#define ATOM_LCD_BLOFF (ATOM_DISABLE+2) +#define ATOM_LCD_BLON (ATOM_ENABLE+2) +#define ATOM_LCD_BL_BRIGHTNESS_CONTROL (ATOM_ENABLE+3) +#define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5) +#define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5) +#define ATOM_ENCODER_INIT (ATOM_DISABLE+7) +#define ATOM_INIT (ATOM_DISABLE+7) +#define ATOM_GET_STATUS (ATOM_DISABLE+8) + +#define ATOM_BLANKING 1 +#define ATOM_BLANKING_OFF 0 + +#define ATOM_CURSOR1 0 +#define ATOM_CURSOR2 1 + +#define ATOM_ICON1 0 +#define ATOM_ICON2 1 + +#define ATOM_CRT1 0 +#define ATOM_CRT2 1 + +#define ATOM_TV_NTSC 1 +#define ATOM_TV_NTSCJ 2 +#define ATOM_TV_PAL 3 +#define ATOM_TV_PALM 4 +#define ATOM_TV_PALCN 5 +#define ATOM_TV_PALN 6 +#define ATOM_TV_PAL60 7 +#define ATOM_TV_SECAM 8 +#define ATOM_TV_CV 16 + +#define ATOM_DAC1_PS2 1 +#define ATOM_DAC1_CV 2 +#define ATOM_DAC1_NTSC 3 +#define ATOM_DAC1_PAL 4 + +#define ATOM_DAC2_PS2 ATOM_DAC1_PS2 +#define ATOM_DAC2_CV ATOM_DAC1_CV +#define ATOM_DAC2_NTSC ATOM_DAC1_NTSC +#define ATOM_DAC2_PAL ATOM_DAC1_PAL + +#define ATOM_PM_ON 0 +#define ATOM_PM_STANDBY 1 +#define ATOM_PM_SUSPEND 2 +#define ATOM_PM_OFF 3 + +/* Bit0:{=0:single, =1:dual}, + Bit1 {=0:666RGB, =1:888RGB}, + Bit2:3:{Grey level} + Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}*/ + +#define ATOM_PANEL_MISC_DUAL 0x00000001 +#define ATOM_PANEL_MISC_888RGB 0x00000002 +#define ATOM_PANEL_MISC_GREY_LEVEL 0x0000000C +#define ATOM_PANEL_MISC_FPDI 0x00000010 +#define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT 2 +#define ATOM_PANEL_MISC_SPATIAL 0x00000020 +#define ATOM_PANEL_MISC_TEMPORAL 0x00000040 +#define ATOM_PANEL_MISC_API_ENABLED 0x00000080 + + +#define MEMTYPE_DDR1 "DDR1" +#define MEMTYPE_DDR2 "DDR2" +#define MEMTYPE_DDR3 "DDR3" +#define MEMTYPE_DDR4 "DDR4" + +#define ASIC_BUS_TYPE_PCI "PCI" +#define ASIC_BUS_TYPE_AGP "AGP" +#define ASIC_BUS_TYPE_PCIE "PCI_EXPRESS" + +/* Maximum size of that FireGL flag string */ + +#define ATOM_FIREGL_FLAG_STRING "FGL" //Flag used to enable FireGL Support +#define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING 3 //sizeof( ATOM_FIREGL_FLAG_STRING ) + +#define ATOM_FAKE_DESKTOP_STRING "DSK" //Flag used to enable mobile ASIC on Desktop +#define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING + +#define ATOM_M54T_FLAG_STRING "M54T" //Flag used to enable M54T Support +#define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING 4 //sizeof( ATOM_M54T_FLAG_STRING ) + +#define HW_ASSISTED_I2C_STATUS_FAILURE 2 +#define HW_ASSISTED_I2C_STATUS_SUCCESS 1 + +#pragma pack(1) /* BIOS data must use byte alignment */ + +/* Define offset to location of ROM header. */ + +#define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L +#define OFFSET_TO_ATOM_ROM_IMAGE_SIZE 0x00000002L + +#define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE 0x94 +#define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE 20 /* including the terminator 0x0! */ +#define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER 0x002f +#define OFFSET_TO_GET_ATOMBIOS_STRINGS_START 0x006e + +/* Common header for all ROM Data tables. + Every table pointed _ATOM_MASTER_DATA_TABLE has this common header. + And the pointer actually points to this header. */ + +typedef struct _ATOM_COMMON_TABLE_HEADER +{ + USHORT usStructureSize; + UCHAR ucTableFormatRevision; /*Change it when the Parser is not backward compatible */ + UCHAR ucTableContentRevision; /*Change it only when the table needs to change but the firmware */ + /*Image can't be updated, while Driver needs to carry the new table! */ +}ATOM_COMMON_TABLE_HEADER; + +/****************************************************************************/ +// Structure stores the ROM header. +/****************************************************************************/ +typedef struct _ATOM_ROM_HEADER +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR uaFirmWareSignature[4]; /*Signature to distinguish between Atombios and non-atombios, + atombios should init it as "ATOM", don't change the position */ + USHORT usBiosRuntimeSegmentAddress; + USHORT usProtectedModeInfoOffset; + USHORT usConfigFilenameOffset; + USHORT usCRC_BlockOffset; + USHORT usBIOS_BootupMessageOffset; + USHORT usInt10Offset; + USHORT usPciBusDevInitCode; + USHORT usIoBaseAddress; + USHORT usSubsystemVendorID; + USHORT usSubsystemID; + USHORT usPCI_InfoOffset; + USHORT usMasterCommandTableOffset; /*Offset for SW to get all command table offsets, Don't change the position */ + USHORT usMasterDataTableOffset; /*Offset for SW to get all data table offsets, Don't change the position */ + UCHAR ucExtendedFunctionCode; + UCHAR ucReserved; +}ATOM_ROM_HEADER; + +/*==============================Command Table Portion==================================== */ + +#ifdef UEFI_BUILD + #define UTEMP USHORT + #define USHORT void* +#endif + +/****************************************************************************/ +// Structures used in Command.mtb +/****************************************************************************/ +typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ + USHORT ASIC_Init; //Function Table, used by various SW components,latest version 1.1 + USHORT GetDisplaySurfaceSize; //Atomic Table, Used by Bios when enabling HW ICON + USHORT ASIC_RegistersInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init + USHORT VRAM_BlockVenderDetection; //Atomic Table, used only by Bios + USHORT DIGxEncoderControl; //Only used by Bios + USHORT MemoryControllerInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init + USHORT EnableCRTCMemReq; //Function Table,directly used by various SW components,latest version 2.1 + USHORT MemoryParamAdjust; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock if needed + USHORT DVOEncoderControl; //Function Table,directly used by various SW components,latest version 1.2 + USHORT GPIOPinControl; //Atomic Table, only used by Bios + USHORT SetEngineClock; //Function Table,directly used by various SW components,latest version 1.1 + USHORT SetMemoryClock; //Function Table,directly used by various SW components,latest version 1.1 + USHORT SetPixelClock; //Function Table,directly used by various SW components,latest version 1.2 + USHORT EnableDispPowerGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init + USHORT ResetMemoryDLL; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock + USHORT ResetMemoryDevice; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock + USHORT MemoryPLLInit; //Atomic Table, used only by Bios + USHORT AdjustDisplayPll; //Atomic Table, used by various SW componentes. + USHORT AdjustMemoryController; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock + USHORT EnableASIC_StaticPwrMgt; //Atomic Table, only used by Bios + USHORT SetUniphyInstance; //Atomic Table, only used by Bios + USHORT DAC_LoadDetection; //Atomic Table, directly used by various SW components,latest version 1.2 + USHORT LVTMAEncoderControl; //Atomic Table,directly used by various SW components,latest version 1.3 + USHORT HW_Misc_Operation; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT DAC1EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT DAC2EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT DVOOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT CV1OutputControl; //Atomic Table, Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead + USHORT GetConditionalGoldenSetting; //Only used by Bios + USHORT TVEncoderControl; //Function Table,directly used by various SW components,latest version 1.1 + USHORT PatchMCSetting; //only used by BIOS + USHORT MC_SEQ_Control; //only used by BIOS + USHORT Gfx_Harvesting; //Atomic Table, Obsolete from Ry6xx, Now only used by BIOS for GFX harvesting + USHORT EnableScaler; //Atomic Table, used only by Bios + USHORT BlankCRTC; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT EnableCRTC; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT GetPixelClock; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT EnableVGA_Render; //Function Table,directly used by various SW components,latest version 1.1 + USHORT GetSCLKOverMCLKRatio; //Atomic Table, only used by Bios + USHORT SetCRTC_Timing; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT SetCRTC_OverScan; //Atomic Table, used by various SW components,latest version 1.1 + USHORT SetCRTC_Replication; //Atomic Table, used only by Bios + USHORT SelectCRTC_Source; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT EnableGraphSurfaces; //Atomic Table, used only by Bios + USHORT UpdateCRTC_DoubleBufferRegisters; //Atomic Table, used only by Bios + USHORT LUT_AutoFill; //Atomic Table, only used by Bios + USHORT EnableHW_IconCursor; //Atomic Table, only used by Bios + USHORT GetMemoryClock; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT GetEngineClock; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT SetCRTC_UsingDTDTiming; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT ExternalEncoderControl; //Atomic Table, directly used by various SW components,latest version 2.1 + USHORT LVTMAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT VRAM_BlockDetectionByStrap; //Atomic Table, used only by Bios + USHORT MemoryCleanUp; //Atomic Table, only used by Bios + USHORT ProcessI2cChannelTransaction; //Function Table,only used by Bios + USHORT WriteOneByteToHWAssistedI2C; //Function Table,indirectly used by various SW components + USHORT ReadHWAssistedI2CStatus; //Atomic Table, indirectly used by various SW components + USHORT SpeedFanControl; //Function Table,indirectly used by various SW components,called from ASIC_Init + USHORT PowerConnectorDetection; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT MC_Synchronization; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock + USHORT ComputeMemoryEnginePLL; //Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock + USHORT MemoryRefreshConversion; //Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock + USHORT VRAM_GetCurrentInfoBlock; //Atomic Table, used only by Bios + USHORT DynamicMemorySettings; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock + USHORT MemoryTraining; //Atomic Table, used only by Bios + USHORT EnableSpreadSpectrumOnPPLL; //Atomic Table, directly used by various SW components,latest version 1.2 + USHORT TMDSAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT SetVoltage; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1 + USHORT DAC1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT DAC2OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT ComputeMemoryClockParam; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" + USHORT ClockSource; //Atomic Table, indirectly used by various SW components,called from ASIC_Init + USHORT MemoryDeviceInit; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock + USHORT GetDispObjectInfo; //Atomic Table, indirectly used by various SW components,called from EnableVGARender + USHORT DIG1EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1 + USHORT DIG2EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1 + USHORT DIG1TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1 + USHORT DIG2TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1 + USHORT ProcessAuxChannelTransaction; //Function Table,only used by Bios + USHORT DPEncoderService; //Function Table,only used by Bios + USHORT GetVoltageInfo; //Function Table,only used by Bios since SI +}ATOM_MASTER_LIST_OF_COMMAND_TABLES; + +// For backward compatible +#define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction +#define DPTranslatorControl DIG2EncoderControl +#define UNIPHYTransmitterControl DIG1TransmitterControl +#define LVTMATransmitterControl DIG2TransmitterControl +#define SetCRTC_DPM_State GetConditionalGoldenSetting +#define ASIC_StaticPwrMgtStatusChange SetUniphyInstance +#define HPDInterruptService ReadHWAssistedI2CStatus +#define EnableVGA_Access GetSCLKOverMCLKRatio +#define EnableYUV GetDispObjectInfo +#define DynamicClockGating EnableDispPowerGating +#define SetupHWAssistedI2CStatus ComputeMemoryClockParam + +#define TMDSAEncoderControl PatchMCSetting +#define LVDSEncoderControl MC_SEQ_Control +#define LCD1OutputControl HW_Misc_Operation +#define TV1OutputControl Gfx_Harvesting + +typedef struct _ATOM_MASTER_COMMAND_TABLE +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables; +}ATOM_MASTER_COMMAND_TABLE; + +/****************************************************************************/ +// Structures used in every command table +/****************************************************************************/ +typedef struct _ATOM_TABLE_ATTRIBUTE +{ +#if ATOM_BIG_ENDIAN + USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag + USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword), + USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword), +#else + USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword), + USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword), + USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag +#endif +}ATOM_TABLE_ATTRIBUTE; + +typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS +{ + ATOM_TABLE_ATTRIBUTE sbfAccess; + USHORT susAccess; +}ATOM_TABLE_ATTRIBUTE_ACCESS; + +/****************************************************************************/ +// Common header for all command tables. +// Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header. +// And the pointer actually points to this header. +/****************************************************************************/ +typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER +{ + ATOM_COMMON_TABLE_HEADER CommonHeader; + ATOM_TABLE_ATTRIBUTE TableAttribute; +}ATOM_COMMON_ROM_COMMAND_TABLE_HEADER; + +/****************************************************************************/ +// Structures used by ComputeMemoryEnginePLLTable +/****************************************************************************/ +#define COMPUTE_MEMORY_PLL_PARAM 1 +#define COMPUTE_ENGINE_PLL_PARAM 2 +#define ADJUST_MC_SETTING_PARAM 3 + +/****************************************************************************/ +// Structures used by AdjustMemoryControllerTable +/****************************************************************************/ +typedef struct _ATOM_ADJUST_MEMORY_CLOCK_FREQ +{ +#if ATOM_BIG_ENDIAN + ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block + ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0] + ULONG ulClockFreq:24; +#else + ULONG ulClockFreq:24; + ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0] + ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block +#endif +}ATOM_ADJUST_MEMORY_CLOCK_FREQ; +#define POINTER_RETURN_FLAG 0x80 + +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS +{ + ULONG ulClock; //When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div + UCHAR ucAction; //0:reserved //1:Memory //2:Engine + UCHAR ucReserved; //may expand to return larger Fbdiv later + UCHAR ucFbDiv; //return value + UCHAR ucPostDiv; //return value +}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS; + +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 +{ + ULONG ulClock; //When return, [23:0] return real clock + UCHAR ucAction; //0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register + USHORT usFbDiv; //return Feedback value to be written to register + UCHAR ucPostDiv; //return post div to be written to register +}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2; +#define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS + + +#define SET_CLOCK_FREQ_MASK 0x00FFFFFF //Clock change tables only take bit [23:0] as the requested clock value +#define USE_NON_BUS_CLOCK_MASK 0x01000000 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) +#define USE_MEMORY_SELF_REFRESH_MASK 0x02000000 //Only applicable to memory clock change, when set, using memory self refresh during clock transition +#define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04000000 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change +#define FIRST_TIME_CHANGE_CLOCK 0x08000000 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup +#define SKIP_SW_PROGRAM_PLL 0x10000000 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL +#define USE_SS_ENABLED_PIXEL_CLOCK USE_NON_BUS_CLOCK_MASK + +#define b3USE_NON_BUS_CLOCK_MASK 0x01 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) +#define b3USE_MEMORY_SELF_REFRESH 0x02 //Only applicable to memory clock change, when set, using memory self refresh during clock transition +#define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change +#define b3FIRST_TIME_CHANGE_CLOCK 0x08 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup +#define b3SKIP_SW_PROGRAM_PLL 0x10 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL + +typedef struct _ATOM_COMPUTE_CLOCK_FREQ +{ +#if ATOM_BIG_ENDIAN + ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM + ULONG ulClockFreq:24; // in unit of 10kHz +#else + ULONG ulClockFreq:24; // in unit of 10kHz + ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM +#endif +}ATOM_COMPUTE_CLOCK_FREQ; + +typedef struct _ATOM_S_MPLL_FB_DIVIDER +{ + USHORT usFbDivFrac; + USHORT usFbDiv; +}ATOM_S_MPLL_FB_DIVIDER; + +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 +{ + union + { + ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter + ULONG ulClockParams; //ULONG access for BE + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter + }; + UCHAR ucRefDiv; //Output Parameter + UCHAR ucPostDiv; //Output Parameter + UCHAR ucCntlFlag; //Output Parameter + UCHAR ucReserved; +}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3; + +// ucCntlFlag +#define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1 +#define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2 +#define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4 +#define ATOM_PLL_CNTL_FLAG_SPLL_ISPARE_9 8 + + +// V4 are only used for APU which PLL outside GPU +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 +{ +#if ATOM_BIG_ENDIAN + ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly + ULONG ulClock:24; //Input= target clock, output = actual clock +#else + ULONG ulClock:24; //Input= target clock, output = actual clock + ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly +#endif +}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4; + +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5 +{ + union + { + ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter + ULONG ulClockParams; //ULONG access for BE + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter + }; + UCHAR ucRefDiv; //Output Parameter + UCHAR ucPostDiv; //Output Parameter + union + { + UCHAR ucCntlFlag; //Output Flags + UCHAR ucInputFlag; //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0) mode + }; + UCHAR ucReserved; +}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5; + + +typedef struct _COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6 +{ + ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter + ULONG ulReserved[2]; +}COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6; + +//ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag +#define COMPUTE_GPUCLK_INPUT_FLAG_CLK_TYPE_MASK 0x0f +#define COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK 0x00 +#define COMPUTE_GPUCLK_INPUT_FLAG_SCLK 0x01 + +typedef struct _COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6 +{ + COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 ulClock; //Output Parameter: ucPostDiv=DFS divider + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter: PLL FB divider + UCHAR ucPllRefDiv; //Output Parameter: PLL ref divider + UCHAR ucPllPostDiv; //Output Parameter: PLL post divider + UCHAR ucPllCntlFlag; //Output Flags: control flag + UCHAR ucReserved; +}COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6; + +//ucPllCntlFlag +#define SPLL_CNTL_FLAG_VCO_MODE_MASK 0x03 + + +// ucInputFlag +#define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode + +// use for ComputeMemoryClockParamTable +typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1 +{ + union + { + ULONG ulClock; + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output:UPPER_WORD=FB_DIV_INTEGER, LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS) + }; + UCHAR ucDllSpeed; //Output + UCHAR ucPostDiv; //Output + union{ + UCHAR ucInputFlag; //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode + UCHAR ucPllCntlFlag; //Output: + }; + UCHAR ucBWCntl; +}COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1; + +// definition of ucInputFlag +#define MPLL_INPUT_FLAG_STROBE_MODE_EN 0x01 +// definition of ucPllCntlFlag +#define MPLL_CNTL_FLAG_VCO_MODE_MASK 0x03 +#define MPLL_CNTL_FLAG_BYPASS_DQ_PLL 0x04 +#define MPLL_CNTL_FLAG_QDR_ENABLE 0x08 +#define MPLL_CNTL_FLAG_AD_HALF_RATE 0x10 + +//MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL +#define MPLL_CNTL_FLAG_BYPASS_AD_PLL 0x04 + +typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER +{ + ATOM_COMPUTE_CLOCK_FREQ ulClock; + ULONG ulReserved[2]; +}DYNAMICE_MEMORY_SETTINGS_PARAMETER; + +typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER +{ + ATOM_COMPUTE_CLOCK_FREQ ulClock; + ULONG ulMemoryClock; + ULONG ulReserved; +}DYNAMICE_ENGINE_SETTINGS_PARAMETER; + +/****************************************************************************/ +// Structures used by SetEngineClockTable +/****************************************************************************/ +typedef struct _SET_ENGINE_CLOCK_PARAMETERS +{ + ULONG ulTargetEngineClock; //In 10Khz unit +}SET_ENGINE_CLOCK_PARAMETERS; + +typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION +{ + ULONG ulTargetEngineClock; //In 10Khz unit + COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved; +}SET_ENGINE_CLOCK_PS_ALLOCATION; + +/****************************************************************************/ +// Structures used by SetMemoryClockTable +/****************************************************************************/ +typedef struct _SET_MEMORY_CLOCK_PARAMETERS +{ + ULONG ulTargetMemoryClock; //In 10Khz unit +}SET_MEMORY_CLOCK_PARAMETERS; + +typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION +{ + ULONG ulTargetMemoryClock; //In 10Khz unit + COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved; +}SET_MEMORY_CLOCK_PS_ALLOCATION; + +/****************************************************************************/ +// Structures used by ASIC_Init.ctb +/****************************************************************************/ +typedef struct _ASIC_INIT_PARAMETERS +{ + ULONG ulDefaultEngineClock; //In 10Khz unit + ULONG ulDefaultMemoryClock; //In 10Khz unit +}ASIC_INIT_PARAMETERS; + +typedef struct _ASIC_INIT_PS_ALLOCATION +{ + ASIC_INIT_PARAMETERS sASICInitClocks; + SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; //Caller doesn't need to init this structure +}ASIC_INIT_PS_ALLOCATION; + +/****************************************************************************/ +// Structure used by DynamicClockGatingTable.ctb +/****************************************************************************/ +typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS +{ + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucPadding[3]; +}DYNAMIC_CLOCK_GATING_PARAMETERS; +#define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS + +/****************************************************************************/ +// Structure used by EnableDispPowerGatingTable.ctb +/****************************************************************************/ +typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1 +{ + UCHAR ucDispPipeId; // ATOM_CRTC1, ATOM_CRTC2, ... + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucPadding[2]; +}ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1; + +/****************************************************************************/ +// Structure used by EnableASIC_StaticPwrMgtTable.ctb +/****************************************************************************/ +typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS +{ + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucPadding[3]; +}ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS; +#define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS + +/****************************************************************************/ +// Structures used by DAC_LoadDetectionTable.ctb +/****************************************************************************/ +typedef struct _DAC_LOAD_DETECTION_PARAMETERS +{ + USHORT usDeviceID; //{ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT} + UCHAR ucDacType; //{ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC} + UCHAR ucMisc; //Valid only when table revision =1.3 and above +}DAC_LOAD_DETECTION_PARAMETERS; + +// DAC_LOAD_DETECTION_PARAMETERS.ucMisc +#define DAC_LOAD_MISC_YPrPb 0x01 + +typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION +{ + DAC_LOAD_DETECTION_PARAMETERS sDacload; + ULONG Reserved[2];// Don't set this one, allocation for EXT DAC +}DAC_LOAD_DETECTION_PS_ALLOCATION; + +/****************************************************************************/ +// Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb +/****************************************************************************/ +typedef struct _DAC_ENCODER_CONTROL_PARAMETERS +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + UCHAR ucDacStandard; // See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0) + UCHAR ucAction; // 0: turn off encoder + // 1: setup and turn on encoder + // 7: ATOM_ENCODER_INIT Initialize DAC +}DAC_ENCODER_CONTROL_PARAMETERS; + +#define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS + +/****************************************************************************/ +// Structures used by DIG1EncoderControlTable +// DIG2EncoderControlTable +// ExternalEncoderControlTable +/****************************************************************************/ +typedef struct _DIG_ENCODER_CONTROL_PARAMETERS +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + UCHAR ucConfig; + // [2] Link Select: + // =0: PHY linkA if bfLane<3 + // =1: PHY linkB if bfLanes<3 + // =0: PHY linkA+B if bfLanes=3 + // [3] Transmitter Sel + // =0: UNIPHY or PCIEPHY + // =1: LVTMA + UCHAR ucAction; // =0: turn off encoder + // =1: turn on encoder + UCHAR ucEncoderMode; + // =0: DP encoder + // =1: LVDS encoder + // =2: DVI encoder + // =3: HDMI encoder + // =4: SDVO encoder + UCHAR ucLaneNum; // how many lanes to enable + UCHAR ucReserved[2]; +}DIG_ENCODER_CONTROL_PARAMETERS; +#define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS +#define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS + +//ucConfig +#define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01 +#define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00 +#define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01 +#define ATOM_ENCODER_CONFIG_DPLINKRATE_5_40GHZ 0x02 +#define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04 +#define ATOM_ENCODER_CONFIG_LINKA 0x00 +#define ATOM_ENCODER_CONFIG_LINKB 0x04 +#define ATOM_ENCODER_CONFIG_LINKA_B ATOM_TRANSMITTER_CONFIG_LINKA +#define ATOM_ENCODER_CONFIG_LINKB_A ATOM_ENCODER_CONFIG_LINKB +#define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK 0x08 +#define ATOM_ENCODER_CONFIG_UNIPHY 0x00 +#define ATOM_ENCODER_CONFIG_LVTMA 0x08 +#define ATOM_ENCODER_CONFIG_TRANSMITTER1 0x00 +#define ATOM_ENCODER_CONFIG_TRANSMITTER2 0x08 +#define ATOM_ENCODER_CONFIG_DIGB 0x80 // VBIOS Internal use, outside SW should set this bit=0 +// ucAction +// ATOM_ENABLE: Enable Encoder +// ATOM_DISABLE: Disable Encoder + +//ucEncoderMode +#define ATOM_ENCODER_MODE_DP 0 +#define ATOM_ENCODER_MODE_LVDS 1 +#define ATOM_ENCODER_MODE_DVI 2 +#define ATOM_ENCODER_MODE_HDMI 3 +#define ATOM_ENCODER_MODE_SDVO 4 +#define ATOM_ENCODER_MODE_DP_AUDIO 5 +#define ATOM_ENCODER_MODE_TV 13 +#define ATOM_ENCODER_MODE_CV 14 +#define ATOM_ENCODER_MODE_CRT 15 +#define ATOM_ENCODER_MODE_DVO 16 +#define ATOM_ENCODER_MODE_DP_SST ATOM_ENCODER_MODE_DP // For DP1.2 +#define ATOM_ENCODER_MODE_DP_MST 5 // For DP1.2 + +typedef struct _ATOM_DIG_ENCODER_CONFIG_V2 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucReserved1:2; + UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF + UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F + UCHAR ucReserved:1; + UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz +#else + UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz + UCHAR ucReserved:1; + UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F + UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF + UCHAR ucReserved1:2; +#endif +}ATOM_DIG_ENCODER_CONFIG_V2; + + +typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + ATOM_DIG_ENCODER_CONFIG_V2 acConfig; + UCHAR ucAction; + UCHAR ucEncoderMode; + // =0: DP encoder + // =1: LVDS encoder + // =2: DVI encoder + // =3: HDMI encoder + // =4: SDVO encoder + UCHAR ucLaneNum; // how many lanes to enable + UCHAR ucStatus; // = DP_LINK_TRAINING_COMPLETE or DP_LINK_TRAINING_INCOMPLETE, only used by VBIOS with command ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS + UCHAR ucReserved; +}DIG_ENCODER_CONTROL_PARAMETERS_V2; + +//ucConfig +#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01 +#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00 +#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01 +#define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04 +#define ATOM_ENCODER_CONFIG_V2_LINKA 0x00 +#define ATOM_ENCODER_CONFIG_V2_LINKB 0x04 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08 +#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10 + +// ucAction: +// ATOM_DISABLE +// ATOM_ENABLE +#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_START 0x08 +#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1 0x09 +#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2 0x0a +#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3 0x13 +#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE 0x0b +#define ATOM_ENCODER_CMD_DP_VIDEO_OFF 0x0c +#define ATOM_ENCODER_CMD_DP_VIDEO_ON 0x0d +#define ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS 0x0e +#define ATOM_ENCODER_CMD_SETUP 0x0f +#define ATOM_ENCODER_CMD_SETUP_PANEL_MODE 0x10 + +// ucStatus +#define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE 0x10 +#define ATOM_ENCODER_STATUS_LINK_TRAINING_INCOMPLETE 0x00 + +//ucTableFormatRevision=1 +//ucTableContentRevision=3 +// Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver +typedef struct _ATOM_DIG_ENCODER_CONFIG_V3 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucReserved1:1; + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) + UCHAR ucReserved:3; + UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz +#else + UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz + UCHAR ucReserved:3; + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) + UCHAR ucReserved1:1; +#endif +}ATOM_DIG_ENCODER_CONFIG_V3; + +#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03 +#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00 +#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01 +#define ATOM_ENCODER_CONFIG_V3_ENCODER_SEL 0x70 +#define ATOM_ENCODER_CONFIG_V3_DIG0_ENCODER 0x00 +#define ATOM_ENCODER_CONFIG_V3_DIG1_ENCODER 0x10 +#define ATOM_ENCODER_CONFIG_V3_DIG2_ENCODER 0x20 +#define ATOM_ENCODER_CONFIG_V3_DIG3_ENCODER 0x30 +#define ATOM_ENCODER_CONFIG_V3_DIG4_ENCODER 0x40 +#define ATOM_ENCODER_CONFIG_V3_DIG5_ENCODER 0x50 + +typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3 +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + ATOM_DIG_ENCODER_CONFIG_V3 acConfig; + UCHAR ucAction; + union { + UCHAR ucEncoderMode; + // =0: DP encoder + // =1: LVDS encoder + // =2: DVI encoder + // =3: HDMI encoder + // =4: SDVO encoder + // =5: DP audio + UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE + // =0: external DP + // =1: internal DP2 + // =0x11: internal DP1 for NutMeg/Travis DP translator + }; + UCHAR ucLaneNum; // how many lanes to enable + UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP + UCHAR ucReserved; +}DIG_ENCODER_CONTROL_PARAMETERS_V3; + +//ucTableFormatRevision=1 +//ucTableContentRevision=4 +// start from NI +// Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver +typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucReserved1:1; + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) + UCHAR ucReserved:2; + UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version +#else + UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version + UCHAR ucReserved:2; + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) + UCHAR ucReserved1:1; +#endif +}ATOM_DIG_ENCODER_CONFIG_V4; + +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_MASK 0x03 +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ 0x00 +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ 0x01 +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ 0x02 +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ 0x03 +#define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL 0x70 +#define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER 0x00 +#define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER 0x10 +#define ATOM_ENCODER_CONFIG_V4_DIG2_ENCODER 0x20 +#define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER 0x30 +#define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER 0x40 +#define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER 0x50 +#define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER 0x60 + +typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4 +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + union{ + ATOM_DIG_ENCODER_CONFIG_V4 acConfig; + UCHAR ucConfig; + }; + UCHAR ucAction; + union { + UCHAR ucEncoderMode; + // =0: DP encoder + // =1: LVDS encoder + // =2: DVI encoder + // =3: HDMI encoder + // =4: SDVO encoder + // =5: DP audio + UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE + // =0: external DP + // =1: internal DP2 + // =0x11: internal DP1 for NutMeg/Travis DP translator + }; + UCHAR ucLaneNum; // how many lanes to enable + UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP + UCHAR ucHPD_ID; // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version +}DIG_ENCODER_CONTROL_PARAMETERS_V4; + +// define ucBitPerColor: +#define PANEL_BPC_UNDEFINE 0x00 +#define PANEL_6BIT_PER_COLOR 0x01 +#define PANEL_8BIT_PER_COLOR 0x02 +#define PANEL_10BIT_PER_COLOR 0x03 +#define PANEL_12BIT_PER_COLOR 0x04 +#define PANEL_16BIT_PER_COLOR 0x05 + +//define ucPanelMode +#define DP_PANEL_MODE_EXTERNAL_DP_MODE 0x00 +#define DP_PANEL_MODE_INTERNAL_DP2_MODE 0x01 +#define DP_PANEL_MODE_INTERNAL_DP1_MODE 0x11 + +/****************************************************************************/ +// Structures used by UNIPHYTransmitterControlTable +// LVTMATransmitterControlTable +// DVOOutputControlTable +/****************************************************************************/ +typedef struct _ATOM_DP_VS_MODE +{ + UCHAR ucLaneSel; + UCHAR ucLaneSet; +}ATOM_DP_VS_MODE; + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS +{ + union + { + USHORT usPixelClock; // in 10KHz; for bios convenient + USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h + ATOM_DP_VS_MODE asMode; // DP Voltage swing mode + }; + UCHAR ucConfig; + // [0]=0: 4 lane Link, + // =1: 8 lane Link ( Dual Links TMDS ) + // [1]=0: InCoherent mode + // =1: Coherent Mode + // [2] Link Select: + // =0: PHY linkA if bfLane<3 + // =1: PHY linkB if bfLanes<3 + // =0: PHY linkA+B if bfLanes=3 + // [5:4]PCIE lane Sel + // =0: lane 0~3 or 0~7 + // =1: lane 4~7 + // =2: lane 8~11 or 8~15 + // =3: lane 12~15 + UCHAR ucAction; // =0: turn off encoder + // =1: turn on encoder + UCHAR ucReserved[4]; +}DIG_TRANSMITTER_CONTROL_PARAMETERS; + +#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PARAMETERS + +//ucInitInfo +#define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK 0x00ff + +//ucConfig +#define ATOM_TRANSMITTER_CONFIG_8LANE_LINK 0x01 +#define ATOM_TRANSMITTER_CONFIG_COHERENT 0x02 +#define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK 0x04 +#define ATOM_TRANSMITTER_CONFIG_LINKA 0x00 +#define ATOM_TRANSMITTER_CONFIG_LINKB 0x04 +#define ATOM_TRANSMITTER_CONFIG_LINKA_B 0x00 +#define ATOM_TRANSMITTER_CONFIG_LINKB_A 0x04 + +#define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE +#define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER 0x00 // only used when ATOM_TRANSMITTER_ACTION_ENABLE +#define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE + +#define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK 0x30 +#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL 0x00 +#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE 0x20 +#define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN 0x30 +#define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK 0xc0 +#define ATOM_TRANSMITTER_CONFIG_LANE_0_3 0x00 +#define ATOM_TRANSMITTER_CONFIG_LANE_0_7 0x00 +#define ATOM_TRANSMITTER_CONFIG_LANE_4_7 0x40 +#define ATOM_TRANSMITTER_CONFIG_LANE_8_11 0x80 +#define ATOM_TRANSMITTER_CONFIG_LANE_8_15 0x80 +#define ATOM_TRANSMITTER_CONFIG_LANE_12_15 0xc0 + +//ucAction +#define ATOM_TRANSMITTER_ACTION_DISABLE 0 +#define ATOM_TRANSMITTER_ACTION_ENABLE 1 +#define ATOM_TRANSMITTER_ACTION_LCD_BLOFF 2 +#define ATOM_TRANSMITTER_ACTION_LCD_BLON 3 +#define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL 4 +#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START 5 +#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP 6 +#define ATOM_TRANSMITTER_ACTION_INIT 7 +#define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT 8 +#define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT 9 +#define ATOM_TRANSMITTER_ACTION_SETUP 10 +#define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11 +#define ATOM_TRANSMITTER_ACTION_POWER_ON 12 +#define ATOM_TRANSMITTER_ACTION_POWER_OFF 13 + +// Following are used for DigTransmitterControlTable ver1.2 +typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) + UCHAR ucReserved:1; + UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector +#else + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) + UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector + UCHAR ucReserved:1; + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) +#endif +}ATOM_DIG_TRANSMITTER_CONFIG_V2; + +//ucConfig +//Bit0 +#define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01 + +//Bit1 +#define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02 + +//Bit2 +#define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04 +#define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00 +#define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04 + +// Bit3 +#define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08 +#define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP +#define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP + +// Bit4 +#define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10 + +// Bit7:6 +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0 +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 //AB +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 //CD +#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 //EF + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 +{ + union + { + USHORT usPixelClock; // in 10KHz; for bios convenient + USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h + ATOM_DP_VS_MODE asMode; // DP Voltage swing mode + }; + ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig; + UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX + UCHAR ucReserved[4]; +}DIG_TRANSMITTER_CONTROL_PARAMETERS_V2; + +typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V3 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) + UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2 + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector +#else + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F + UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2 + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) +#endif +}ATOM_DIG_TRANSMITTER_CONFIG_V3; + + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3 +{ + union + { + USHORT usPixelClock; // in 10KHz; for bios convenient + USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h + ATOM_DP_VS_MODE asMode; // DP Voltage swing mode + }; + ATOM_DIG_TRANSMITTER_CONFIG_V3 acConfig; + UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX + UCHAR ucLaneNum; + UCHAR ucReserved[3]; +}DIG_TRANSMITTER_CONTROL_PARAMETERS_V3; + +//ucConfig +//Bit0 +#define ATOM_TRANSMITTER_CONFIG_V3_DUAL_LINK_CONNECTOR 0x01 + +//Bit1 +#define ATOM_TRANSMITTER_CONFIG_V3_COHERENT 0x02 + +//Bit2 +#define ATOM_TRANSMITTER_CONFIG_V3_LINK_SEL_MASK 0x04 +#define ATOM_TRANSMITTER_CONFIG_V3_LINKA 0x00 +#define ATOM_TRANSMITTER_CONFIG_V3_LINKB 0x04 + +// Bit3 +#define ATOM_TRANSMITTER_CONFIG_V3_ENCODER_SEL_MASK 0x08 +#define ATOM_TRANSMITTER_CONFIG_V3_DIG1_ENCODER 0x00 +#define ATOM_TRANSMITTER_CONFIG_V3_DIG2_ENCODER 0x08 + +// Bit5:4 +#define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SEL_MASK 0x30 +#define ATOM_TRASMITTER_CONFIG_V3_P1PLL 0x00 +#define ATOM_TRASMITTER_CONFIG_V3_P2PLL 0x10 +#define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SRC_EXT 0x20 + +// Bit7:6 +#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER_SEL_MASK 0xC0 +#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER1 0x00 //AB +#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER2 0x40 //CD +#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER3 0x80 //EF + + +/****************************************************************************/ +// Structures used by UNIPHYTransmitterControlTable V1.4 +// ASIC Families: NI +// ucTableFormatRevision=1 +// ucTableContentRevision=4 +/****************************************************************************/ +typedef struct _ATOM_DP_VS_MODE_V4 +{ + UCHAR ucLaneSel; + union + { + UCHAR ucLaneSet; + struct { +#if ATOM_BIG_ENDIAN + UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4 + UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level + UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level +#else + UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level + UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level + UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4 +#endif + }; + }; +}ATOM_DP_VS_MODE_V4; + +typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V4 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) + UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector +#else + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F + UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) +#endif +}ATOM_DIG_TRANSMITTER_CONFIG_V4; + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4 +{ + union + { + USHORT usPixelClock; // in 10KHz; for bios convenient + USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h + ATOM_DP_VS_MODE_V4 asMode; // DP Voltage swing mode Redefined comparing to previous version + }; + union + { + ATOM_DIG_TRANSMITTER_CONFIG_V4 acConfig; + UCHAR ucConfig; + }; + UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX + UCHAR ucLaneNum; + UCHAR ucReserved[3]; +}DIG_TRANSMITTER_CONTROL_PARAMETERS_V4; + +//ucConfig +//Bit0 +#define ATOM_TRANSMITTER_CONFIG_V4_DUAL_LINK_CONNECTOR 0x01 +//Bit1 +#define ATOM_TRANSMITTER_CONFIG_V4_COHERENT 0x02 +//Bit2 +#define ATOM_TRANSMITTER_CONFIG_V4_LINK_SEL_MASK 0x04 +#define ATOM_TRANSMITTER_CONFIG_V4_LINKA 0x00 +#define ATOM_TRANSMITTER_CONFIG_V4_LINKB 0x04 +// Bit3 +#define ATOM_TRANSMITTER_CONFIG_V4_ENCODER_SEL_MASK 0x08 +#define ATOM_TRANSMITTER_CONFIG_V4_DIG1_ENCODER 0x00 +#define ATOM_TRANSMITTER_CONFIG_V4_DIG2_ENCODER 0x08 +// Bit5:4 +#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SEL_MASK 0x30 +#define ATOM_TRANSMITTER_CONFIG_V4_P1PLL 0x00 +#define ATOM_TRANSMITTER_CONFIG_V4_P2PLL 0x10 +#define ATOM_TRANSMITTER_CONFIG_V4_DCPLL 0x20 // New in _V4 +#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SRC_EXT 0x30 // Changed comparing to V3 +// Bit7:6 +#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER_SEL_MASK 0xC0 +#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER1 0x00 //AB +#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER2 0x40 //CD +#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3 0x80 //EF + + +typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucReservd1:1; + UCHAR ucHPDSel:3; + UCHAR ucPhyClkSrcId:2; + UCHAR ucCoherentMode:1; + UCHAR ucReserved:1; +#else + UCHAR ucReserved:1; + UCHAR ucCoherentMode:1; + UCHAR ucPhyClkSrcId:2; + UCHAR ucHPDSel:3; + UCHAR ucReservd1:1; +#endif +}ATOM_DIG_TRANSMITTER_CONFIG_V5; + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5 +{ + USHORT usSymClock; // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock, (HDMI deep color), =pixel clock * deep_color_ratio + UCHAR ucPhyId; // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF + UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_xxx + UCHAR ucLaneNum; // indicate lane number 1-8 + UCHAR ucConnObjId; // Connector Object Id defined in ObjectId.h + UCHAR ucDigMode; // indicate DIG mode + union{ + ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig; + UCHAR ucConfig; + }; + UCHAR ucDigEncoderSel; // indicate DIG front end encoder + UCHAR ucDPLaneSet; + UCHAR ucReserved; + UCHAR ucReserved1; +}DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5; + +//ucPhyId +#define ATOM_PHY_ID_UNIPHYA 0 +#define ATOM_PHY_ID_UNIPHYB 1 +#define ATOM_PHY_ID_UNIPHYC 2 +#define ATOM_PHY_ID_UNIPHYD 3 +#define ATOM_PHY_ID_UNIPHYE 4 +#define ATOM_PHY_ID_UNIPHYF 5 +#define ATOM_PHY_ID_UNIPHYG 6 + +// ucDigEncoderSel +#define ATOM_TRANMSITTER_V5__DIGA_SEL 0x01 +#define ATOM_TRANMSITTER_V5__DIGB_SEL 0x02 +#define ATOM_TRANMSITTER_V5__DIGC_SEL 0x04 +#define ATOM_TRANMSITTER_V5__DIGD_SEL 0x08 +#define ATOM_TRANMSITTER_V5__DIGE_SEL 0x10 +#define ATOM_TRANMSITTER_V5__DIGF_SEL 0x20 +#define ATOM_TRANMSITTER_V5__DIGG_SEL 0x40 + +// ucDigMode +#define ATOM_TRANSMITTER_DIGMODE_V5_DP 0 +#define ATOM_TRANSMITTER_DIGMODE_V5_LVDS 1 +#define ATOM_TRANSMITTER_DIGMODE_V5_DVI 2 +#define ATOM_TRANSMITTER_DIGMODE_V5_HDMI 3 +#define ATOM_TRANSMITTER_DIGMODE_V5_SDVO 4 +#define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST 5 + +// ucDPLaneSet +#define DP_LANE_SET__0DB_0_4V 0x00 +#define DP_LANE_SET__0DB_0_6V 0x01 +#define DP_LANE_SET__0DB_0_8V 0x02 +#define DP_LANE_SET__0DB_1_2V 0x03 +#define DP_LANE_SET__3_5DB_0_4V 0x08 +#define DP_LANE_SET__3_5DB_0_6V 0x09 +#define DP_LANE_SET__3_5DB_0_8V 0x0a +#define DP_LANE_SET__6DB_0_4V 0x10 +#define DP_LANE_SET__6DB_0_6V 0x11 +#define DP_LANE_SET__9_5DB_0_4V 0x18 + +// ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig; +// Bit1 +#define ATOM_TRANSMITTER_CONFIG_V5_COHERENT 0x02 + +// Bit3:2 +#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK 0x0c +#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT 0x02 + +#define ATOM_TRANSMITTER_CONFIG_V5_P1PLL 0x00 +#define ATOM_TRANSMITTER_CONFIG_V5_P2PLL 0x04 +#define ATOM_TRANSMITTER_CONFIG_V5_P0PLL 0x08 +#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT 0x0c +// Bit6:4 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK 0x70 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT 0x04 + +#define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL 0x00 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL 0x10 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL 0x20 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL 0x30 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL 0x40 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL 0x50 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL 0x60 + +#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5 DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5 + + +/****************************************************************************/ +// Structures used by ExternalEncoderControlTable V1.3 +// ASIC Families: Evergreen, Llano, NI +// ucTableFormatRevision=1 +// ucTableContentRevision=3 +/****************************************************************************/ + +typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 +{ + union{ + USHORT usPixelClock; // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT + USHORT usConnectorId; // connector id, valid when ucAction = INIT + }; + UCHAR ucConfig; // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT + UCHAR ucAction; // + UCHAR ucEncoderMode; // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT + UCHAR ucLaneNum; // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT + UCHAR ucBitPerColor; // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP + UCHAR ucReserved; +}EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3; + +// ucAction +#define EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT 0x00 +#define EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT 0x01 +#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT 0x07 +#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP 0x0f +#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10 +#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11 +#define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12 +#define EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP 0x14 + +// ucConfig +#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03 +#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00 +#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01 +#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ 0x02 +#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MASK 0x70 +#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER1 0x00 +#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER2 0x10 +#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER3 0x20 + +typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3 +{ + EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 sExtEncoder; + ULONG ulReserved[2]; +}EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3; + + +/****************************************************************************/ +// Structures used by DAC1OuputControlTable +// DAC2OuputControlTable +// LVTMAOutputControlTable (Before DEC30) +// TMDSAOutputControlTable (Before DEC30) +/****************************************************************************/ +typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +{ + UCHAR ucAction; // Possible input:ATOM_ENABLE||ATOMDISABLE + // When the display is LCD, in addition to above: + // ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START|| + // ATOM_LCD_SELFTEST_STOP + + UCHAR aucPadding[3]; // padding to DWORD aligned +}DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS; + +#define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS + + +#define CRT1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define CRT1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define CRT2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define CRT2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define CV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define CV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define TV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define TV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define DFP1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define DFP1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define DFP2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define DFP2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define LCD1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define LCD1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION + +#define DVO_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS +#define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION +#define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS + +/****************************************************************************/ +// Structures used by BlankCRTCTable +/****************************************************************************/ +typedef struct _BLANK_CRTC_PARAMETERS +{ + UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 + UCHAR ucBlanking; // ATOM_BLANKING or ATOM_BLANKINGOFF + USHORT usBlackColorRCr; + USHORT usBlackColorGY; + USHORT usBlackColorBCb; +}BLANK_CRTC_PARAMETERS; +#define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS + +/****************************************************************************/ +// Structures used by EnableCRTCTable +// EnableCRTCMemReqTable +// UpdateCRTC_DoubleBufferRegistersTable +/****************************************************************************/ +typedef struct _ENABLE_CRTC_PARAMETERS +{ + UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucPadding[2]; +}ENABLE_CRTC_PARAMETERS; +#define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS + +/****************************************************************************/ +// Structures used by SetCRTC_OverScanTable +/****************************************************************************/ +typedef struct _SET_CRTC_OVERSCAN_PARAMETERS +{ + USHORT usOverscanRight; // right + USHORT usOverscanLeft; // left + USHORT usOverscanBottom; // bottom + USHORT usOverscanTop; // top + UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 + UCHAR ucPadding[3]; +}SET_CRTC_OVERSCAN_PARAMETERS; +#define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS + +/****************************************************************************/ +// Structures used by SetCRTC_ReplicationTable +/****************************************************************************/ +typedef struct _SET_CRTC_REPLICATION_PARAMETERS +{ + UCHAR ucH_Replication; // horizontal replication + UCHAR ucV_Replication; // vertical replication + UCHAR usCRTC; // ATOM_CRTC1 or ATOM_CRTC2 + UCHAR ucPadding; +}SET_CRTC_REPLICATION_PARAMETERS; +#define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS + +/****************************************************************************/ +// Structures used by SelectCRTC_SourceTable +/****************************************************************************/ +typedef struct _SELECT_CRTC_SOURCE_PARAMETERS +{ + UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 + UCHAR ucDevice; // ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|.... + UCHAR ucPadding[2]; +}SELECT_CRTC_SOURCE_PARAMETERS; +#define SELECT_CRTC_SOURCE_PS_ALLOCATION SELECT_CRTC_SOURCE_PARAMETERS + +typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2 +{ + UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 + UCHAR ucEncoderID; // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO + UCHAR ucEncodeMode; // Encoding mode, only valid when using DIG1/DIG2/DVO + UCHAR ucPadding; +}SELECT_CRTC_SOURCE_PARAMETERS_V2; + +//ucEncoderID +//#define ASIC_INT_DAC1_ENCODER_ID 0x00 +//#define ASIC_INT_TV_ENCODER_ID 0x02 +//#define ASIC_INT_DIG1_ENCODER_ID 0x03 +//#define ASIC_INT_DAC2_ENCODER_ID 0x04 +//#define ASIC_EXT_TV_ENCODER_ID 0x06 +//#define ASIC_INT_DVO_ENCODER_ID 0x07 +//#define ASIC_INT_DIG2_ENCODER_ID 0x09 +//#define ASIC_EXT_DIG_ENCODER_ID 0x05 + +//ucEncodeMode +//#define ATOM_ENCODER_MODE_DP 0 +//#define ATOM_ENCODER_MODE_LVDS 1 +//#define ATOM_ENCODER_MODE_DVI 2 +//#define ATOM_ENCODER_MODE_HDMI 3 +//#define ATOM_ENCODER_MODE_SDVO 4 +//#define ATOM_ENCODER_MODE_TV 13 +//#define ATOM_ENCODER_MODE_CV 14 +//#define ATOM_ENCODER_MODE_CRT 15 + +/****************************************************************************/ +// Structures used by SetPixelClockTable +// GetPixelClockTable +/****************************************************************************/ +//Major revision=1., Minor revision=1 +typedef struct _PIXEL_CLOCK_PARAMETERS +{ + USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) + // 0 means disable PPLL + USHORT usRefDiv; // Reference divider + USHORT usFbDiv; // feedback divider + UCHAR ucPostDiv; // post divider + UCHAR ucFracFbDiv; // fractional feedback divider + UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2 + UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER + UCHAR ucCRTC; // Which CRTC uses this Ppll + UCHAR ucPadding; +}PIXEL_CLOCK_PARAMETERS; + +//Major revision=1., Minor revision=2, add ucMiscIfno +//ucMiscInfo: +#define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1 +#define MISC_DEVICE_INDEX_MASK 0xF0 +#define MISC_DEVICE_INDEX_SHIFT 4 + +typedef struct _PIXEL_CLOCK_PARAMETERS_V2 +{ + USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) + // 0 means disable PPLL + USHORT usRefDiv; // Reference divider + USHORT usFbDiv; // feedback divider + UCHAR ucPostDiv; // post divider + UCHAR ucFracFbDiv; // fractional feedback divider + UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2 + UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER + UCHAR ucCRTC; // Which CRTC uses this Ppll + UCHAR ucMiscInfo; // Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog +}PIXEL_CLOCK_PARAMETERS_V2; + +//Major revision=1., Minor revision=3, structure/definition change +//ucEncoderMode: +//ATOM_ENCODER_MODE_DP +//ATOM_ENOCDER_MODE_LVDS +//ATOM_ENOCDER_MODE_DVI +//ATOM_ENOCDER_MODE_HDMI +//ATOM_ENOCDER_MODE_SDVO +//ATOM_ENCODER_MODE_TV 13 +//ATOM_ENCODER_MODE_CV 14 +//ATOM_ENCODER_MODE_CRT 15 + +//ucDVOConfig +//#define DVO_ENCODER_CONFIG_RATE_SEL 0x01 +//#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00 +//#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01 +//#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c +//#define DVO_ENCODER_CONFIG_LOW12BIT 0x00 +//#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04 +//#define DVO_ENCODER_CONFIG_24BIT 0x08 + +//ucMiscInfo: also changed, see below +#define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL 0x01 +#define PIXEL_CLOCK_MISC_VGA_MODE 0x02 +#define PIXEL_CLOCK_MISC_CRTC_SEL_MASK 0x04 +#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1 0x00 +#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2 0x04 +#define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK 0x08 +#define PIXEL_CLOCK_MISC_REF_DIV_SRC 0x10 +// V1.4 for RoadRunner +#define PIXEL_CLOCK_V4_MISC_SS_ENABLE 0x10 +#define PIXEL_CLOCK_V4_MISC_COHERENT_MODE 0x20 + + +typedef struct _PIXEL_CLOCK_PARAMETERS_V3 +{ + USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) + // 0 means disable PPLL. For VGA PPLL,make sure this value is not 0. + USHORT usRefDiv; // Reference divider + USHORT usFbDiv; // feedback divider + UCHAR ucPostDiv; // post divider + UCHAR ucFracFbDiv; // fractional feedback divider + UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2 + UCHAR ucTransmitterId; // graphic encoder id defined in objectId.h + union + { + UCHAR ucEncoderMode; // encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/ + UCHAR ucDVOConfig; // when use DVO, need to know SDR/DDR, 12bit or 24bit + }; + UCHAR ucMiscInfo; // bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel + // bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source + // bit[4]=0:use XTALIN as the source of reference divider,=1 use the pre-defined clock as the source of reference divider +}PIXEL_CLOCK_PARAMETERS_V3; + +#define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2 +#define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST + +typedef struct _PIXEL_CLOCK_PARAMETERS_V5 +{ + UCHAR ucCRTC; // ATOM_CRTC1~6, indicate the CRTC controller to + // drive the pixel clock. not used for DCPLL case. + union{ + UCHAR ucReserved; + UCHAR ucFracFbDiv; // [gphan] temporary to prevent build problem. remove it after driver code is changed. + }; + USHORT usPixelClock; // target the pixel clock to drive the CRTC timing + // 0 means disable PPLL/DCPLL. + USHORT usFbDiv; // feedback divider integer part. + UCHAR ucPostDiv; // post divider. + UCHAR ucRefDiv; // Reference divider + UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL + UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h, + // indicate which graphic encoder will be used. + UCHAR ucEncoderMode; // Encoder mode: + UCHAR ucMiscInfo; // bit[0]= Force program PPLL + // bit[1]= when VGA timing is used. + // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp + // bit[4]= RefClock source for PPLL. + // =0: XTLAIN( default mode ) + // =1: other external clock source, which is pre-defined + // by VBIOS depend on the feature required. + // bit[7:5]: reserved. + ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 ) + +}PIXEL_CLOCK_PARAMETERS_V5; + +#define PIXEL_CLOCK_V5_MISC_FORCE_PROG_PPLL 0x01 +#define PIXEL_CLOCK_V5_MISC_VGA_MODE 0x02 +#define PIXEL_CLOCK_V5_MISC_HDMI_BPP_MASK 0x0c +#define PIXEL_CLOCK_V5_MISC_HDMI_24BPP 0x00 +#define PIXEL_CLOCK_V5_MISC_HDMI_30BPP 0x04 +#define PIXEL_CLOCK_V5_MISC_HDMI_32BPP 0x08 +#define PIXEL_CLOCK_V5_MISC_REF_DIV_SRC 0x10 + +typedef struct _CRTC_PIXEL_CLOCK_FREQ +{ +#if ATOM_BIG_ENDIAN + ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to + // drive the pixel clock. not used for DCPLL case. + ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing. + // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version. +#else + ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing. + // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version. + ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to + // drive the pixel clock. not used for DCPLL case. +#endif +}CRTC_PIXEL_CLOCK_FREQ; + +typedef struct _PIXEL_CLOCK_PARAMETERS_V6 +{ + union{ + CRTC_PIXEL_CLOCK_FREQ ulCrtcPclkFreq; // pixel clock and CRTC id frequency + ULONG ulDispEngClkFreq; // dispclk frequency + }; + USHORT usFbDiv; // feedback divider integer part. + UCHAR ucPostDiv; // post divider. + UCHAR ucRefDiv; // Reference divider + UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL + UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h, + // indicate which graphic encoder will be used. + UCHAR ucEncoderMode; // Encoder mode: + UCHAR ucMiscInfo; // bit[0]= Force program PPLL + // bit[1]= when VGA timing is used. + // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp + // bit[4]= RefClock source for PPLL. + // =0: XTLAIN( default mode ) + // =1: other external clock source, which is pre-defined + // by VBIOS depend on the feature required. + // bit[7:5]: reserved. + ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 ) + +}PIXEL_CLOCK_PARAMETERS_V6; + +#define PIXEL_CLOCK_V6_MISC_FORCE_PROG_PPLL 0x01 +#define PIXEL_CLOCK_V6_MISC_VGA_MODE 0x02 +#define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK 0x0c +#define PIXEL_CLOCK_V6_MISC_HDMI_24BPP 0x00 +#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP 0x04 +#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP_V6 0x08 //for V6, the correct defintion for 36bpp should be 2 for 36bpp(2:1) +#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08 +#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP_V6 0x04 //for V6, the correct defintion for 30bpp should be 1 for 36bpp(5:4) +#define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c +#define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10 +#define PIXEL_CLOCK_V6_MISC_GEN_DPREFCLK 0x40 + +typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2 +{ + PIXEL_CLOCK_PARAMETERS_V3 sDispClkInput; +}GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2; + +typedef struct _GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2 +{ + UCHAR ucStatus; + UCHAR ucRefDivSrc; // =1: reference clock source from XTALIN, =0: source from PCIE ref clock + UCHAR ucReserved[2]; +}GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2; + +typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3 +{ + PIXEL_CLOCK_PARAMETERS_V5 sDispClkInput; +}GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3; + +/****************************************************************************/ +// Structures used by AdjustDisplayPllTable +/****************************************************************************/ +typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS +{ + USHORT usPixelClock; + UCHAR ucTransmitterID; + UCHAR ucEncodeMode; + union + { + UCHAR ucDVOConfig; //if DVO, need passing link rate and output 12bitlow or 24bit + UCHAR ucConfig; //if none DVO, not defined yet + }; + UCHAR ucReserved[3]; +}ADJUST_DISPLAY_PLL_PARAMETERS; + +#define ADJUST_DISPLAY_CONFIG_SS_ENABLE 0x10 +#define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS + +typedef struct _ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3 +{ + USHORT usPixelClock; // target pixel clock + UCHAR ucTransmitterID; // GPU transmitter id defined in objectid.h + UCHAR ucEncodeMode; // encoder mode: CRT, LVDS, DP, TMDS or HDMI + UCHAR ucDispPllConfig; // display pll configure parameter defined as following DISPPLL_CONFIG_XXXX + UCHAR ucExtTransmitterID; // external encoder id. + UCHAR ucReserved[2]; +}ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3; + +// usDispPllConfig v1.2 for RoadRunner +#define DISPPLL_CONFIG_DVO_RATE_SEL 0x0001 // need only when ucTransmitterID = DVO +#define DISPPLL_CONFIG_DVO_DDR_SPEED 0x0000 // need only when ucTransmitterID = DVO +#define DISPPLL_CONFIG_DVO_SDR_SPEED 0x0001 // need only when ucTransmitterID = DVO +#define DISPPLL_CONFIG_DVO_OUTPUT_SEL 0x000c // need only when ucTransmitterID = DVO +#define DISPPLL_CONFIG_DVO_LOW12BIT 0x0000 // need only when ucTransmitterID = DVO +#define DISPPLL_CONFIG_DVO_UPPER12BIT 0x0004 // need only when ucTransmitterID = DVO +#define DISPPLL_CONFIG_DVO_24BIT 0x0008 // need only when ucTransmitterID = DVO +#define DISPPLL_CONFIG_SS_ENABLE 0x0010 // Only used when ucEncoderMode = DP or LVDS +#define DISPPLL_CONFIG_COHERENT_MODE 0x0020 // Only used when ucEncoderMode = TMDS or HDMI +#define DISPPLL_CONFIG_DUAL_LINK 0x0040 // Only used when ucEncoderMode = TMDS or LVDS + + +typedef struct _ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3 +{ + ULONG ulDispPllFreq; // return display PPLL freq which is used to generate the pixclock, and related idclk, symclk etc + UCHAR ucRefDiv; // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider and post_div ( if it is not given ) + UCHAR ucPostDiv; // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider + UCHAR ucReserved[2]; +}ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3; + +typedef struct _ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3 +{ + union + { + ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3 sInput; + ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3 sOutput; + }; +} ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3; + +/****************************************************************************/ +// Structures used by EnableYUVTable +/****************************************************************************/ +typedef struct _ENABLE_YUV_PARAMETERS +{ + UCHAR ucEnable; // ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB) + UCHAR ucCRTC; // Which CRTC needs this YUV or RGB format + UCHAR ucPadding[2]; +}ENABLE_YUV_PARAMETERS; +#define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS + +/****************************************************************************/ +// Structures used by GetMemoryClockTable +/****************************************************************************/ +typedef struct _GET_MEMORY_CLOCK_PARAMETERS +{ + ULONG ulReturnMemoryClock; // current memory speed in 10KHz unit +} GET_MEMORY_CLOCK_PARAMETERS; +#define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS + +/****************************************************************************/ +// Structures used by GetEngineClockTable +/****************************************************************************/ +typedef struct _GET_ENGINE_CLOCK_PARAMETERS +{ + ULONG ulReturnEngineClock; // current engine speed in 10KHz unit +} GET_ENGINE_CLOCK_PARAMETERS; +#define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS + +/****************************************************************************/ +// Following Structures and constant may be obsolete +/****************************************************************************/ +//Maxium 8 bytes,the data read in will be placed in the parameter space. +//Read operaion successeful when the paramter space is non-zero, otherwise read operation failed +typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS +{ + USHORT usPrescale; //Ratio between Engine clock and I2C clock + USHORT usVRAMAddress; //Address in Frame Buffer where to pace raw EDID + USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status + //WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte + UCHAR ucSlaveAddr; //Read from which slave + UCHAR ucLineNumber; //Read from which HW assisted line +}READ_EDID_FROM_HW_I2C_DATA_PARAMETERS; +#define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION READ_EDID_FROM_HW_I2C_DATA_PARAMETERS + + +#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE 0 +#define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES 1 +#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK 2 +#define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK 3 +#define ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK 4 + +typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS +{ + USHORT usPrescale; //Ratio between Engine clock and I2C clock + USHORT usByteOffset; //Write to which byte + //Upper portion of usByteOffset is Format of data + //1bytePS+offsetPS + //2bytesPS+offsetPS + //blockID+offsetPS + //blockID+offsetID + //blockID+counterID+offsetID + UCHAR ucData; //PS data1 + UCHAR ucStatus; //Status byte 1=success, 2=failure, Also is used as PS data2 + UCHAR ucSlaveAddr; //Write to which slave + UCHAR ucLineNumber; //Write from which HW assisted line +}WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS; + +#define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS + +typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS +{ + USHORT usPrescale; //Ratio between Engine clock and I2C clock + UCHAR ucSlaveAddr; //Write to which slave + UCHAR ucLineNumber; //Write from which HW assisted line +}SET_UP_HW_I2C_DATA_PARAMETERS; + + +/**************************************************************************/ +#define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS + + +/****************************************************************************/ +// Structures used by PowerConnectorDetectionTable +/****************************************************************************/ +typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS +{ + UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected + UCHAR ucPwrBehaviorId; + USHORT usPwrBudget; //how much power currently boot to in unit of watt +}POWER_CONNECTOR_DETECTION_PARAMETERS; + +typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION +{ + UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected + UCHAR ucReserved; + USHORT usPwrBudget; //how much power currently boot to in unit of watt + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; +}POWER_CONNECTOR_DETECTION_PS_ALLOCATION; + +/****************************LVDS SS Command Table Definitions**********************/ + +/****************************************************************************/ +// Structures used by EnableSpreadSpectrumOnPPLLTable +/****************************************************************************/ +typedef struct _ENABLE_LVDS_SS_PARAMETERS +{ + USHORT usSpreadSpectrumPercentage; + UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD + UCHAR ucSpreadSpectrumStepSize_Delay; //bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY + UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE + UCHAR ucPadding[3]; +}ENABLE_LVDS_SS_PARAMETERS; + +//ucTableFormatRevision=1,ucTableContentRevision=2 +typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2 +{ + USHORT usSpreadSpectrumPercentage; + UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD + UCHAR ucSpreadSpectrumStep; // + UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE + UCHAR ucSpreadSpectrumDelay; + UCHAR ucSpreadSpectrumRange; + UCHAR ucPadding; +}ENABLE_LVDS_SS_PARAMETERS_V2; + +//This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS. +typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL +{ + USHORT usSpreadSpectrumPercentage; + UCHAR ucSpreadSpectrumType; // Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD + UCHAR ucSpreadSpectrumStep; // + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucSpreadSpectrumDelay; + UCHAR ucSpreadSpectrumRange; + UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2 +}ENABLE_SPREAD_SPECTRUM_ON_PPLL; + +typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2 +{ + USHORT usSpreadSpectrumPercentage; + UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread. + // Bit[1]: 1-Ext. 0-Int. + // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL + // Bits[7:4] reserved + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8] + USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC +}ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2; + +#define ATOM_PPLL_SS_TYPE_V2_DOWN_SPREAD 0x00 +#define ATOM_PPLL_SS_TYPE_V2_CENTRE_SPREAD 0x01 +#define ATOM_PPLL_SS_TYPE_V2_EXT_SPREAD 0x02 +#define ATOM_PPLL_SS_TYPE_V2_PPLL_SEL_MASK 0x0c +#define ATOM_PPLL_SS_TYPE_V2_P1PLL 0x00 +#define ATOM_PPLL_SS_TYPE_V2_P2PLL 0x04 +#define ATOM_PPLL_SS_TYPE_V2_DCPLL 0x08 +#define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_MASK 0x00FF +#define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_SHIFT 0 +#define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_MASK 0x0F00 +#define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_SHIFT 8 + +// Used by DCE5.0 + typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3 +{ + USHORT usSpreadSpectrumAmountFrac; // SS_AMOUNT_DSFRAC New in DCE5.0 + UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread. + // Bit[1]: 1-Ext. 0-Int. + // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL + // Bits[7:4] reserved + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8] + USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC +}ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3; + +#define ATOM_PPLL_SS_TYPE_V3_DOWN_SPREAD 0x00 +#define ATOM_PPLL_SS_TYPE_V3_CENTRE_SPREAD 0x01 +#define ATOM_PPLL_SS_TYPE_V3_EXT_SPREAD 0x02 +#define ATOM_PPLL_SS_TYPE_V3_PPLL_SEL_MASK 0x0c +#define ATOM_PPLL_SS_TYPE_V3_P1PLL 0x00 +#define ATOM_PPLL_SS_TYPE_V3_P2PLL 0x04 +#define ATOM_PPLL_SS_TYPE_V3_DCPLL 0x08 +#define ATOM_PPLL_SS_TYPE_V3_P0PLL ATOM_PPLL_SS_TYPE_V3_DCPLL +#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK 0x00FF +#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT 0 +#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK 0x0F00 +#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_SHIFT 8 + +#define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL + +/**************************************************************************/ + +typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION +{ + PIXEL_CLOCK_PARAMETERS sPCLKInput; + ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved;//Caller doesn't need to init this portion +}SET_PIXEL_CLOCK_PS_ALLOCATION; + +#define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION + +/****************************************************************************/ +// Structures used by ### +/****************************************************************************/ +typedef struct _MEMORY_TRAINING_PARAMETERS +{ + ULONG ulTargetMemoryClock; //In 10Khz unit +}MEMORY_TRAINING_PARAMETERS; +#define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS + + +/****************************LVDS and other encoder command table definitions **********************/ + + +/****************************************************************************/ +// Structures used by LVDSEncoderControlTable (Before DCE30) +// LVTMAEncoderControlTable (Before DCE30) +// TMDSAEncoderControlTable (Before DCE30) +/****************************************************************************/ +typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + UCHAR ucMisc; // bit0=0: Enable single link + // =1: Enable dual link + // Bit1=0: 666RGB + // =1: 888RGB + UCHAR ucAction; // 0: turn off encoder + // 1: setup and turn on encoder +}LVDS_ENCODER_CONTROL_PARAMETERS; + +#define LVDS_ENCODER_CONTROL_PS_ALLOCATION LVDS_ENCODER_CONTROL_PARAMETERS + +#define TMDS1_ENCODER_CONTROL_PARAMETERS LVDS_ENCODER_CONTROL_PARAMETERS +#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS + +#define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS +#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS + + +//ucTableFormatRevision=1,ucTableContentRevision=2 +typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + UCHAR ucMisc; // see PANEL_ENCODER_MISC_xx defintions below + UCHAR ucAction; // 0: turn off encoder + // 1: setup and turn on encoder + UCHAR ucTruncate; // bit0=0: Disable truncate + // =1: Enable truncate + // bit4=0: 666RGB + // =1: 888RGB + UCHAR ucSpatial; // bit0=0: Disable spatial dithering + // =1: Enable spatial dithering + // bit4=0: 666RGB + // =1: 888RGB + UCHAR ucTemporal; // bit0=0: Disable temporal dithering + // =1: Enable temporal dithering + // bit4=0: 666RGB + // =1: 888RGB + // bit5=0: Gray level 2 + // =1: Gray level 4 + UCHAR ucFRC; // bit4=0: 25FRC_SEL pattern E + // =1: 25FRC_SEL pattern F + // bit6:5=0: 50FRC_SEL pattern A + // =1: 50FRC_SEL pattern B + // =2: 50FRC_SEL pattern C + // =3: 50FRC_SEL pattern D + // bit7=0: 75FRC_SEL pattern E + // =1: 75FRC_SEL pattern F +}LVDS_ENCODER_CONTROL_PARAMETERS_V2; + +#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 + +#define TMDS1_ENCODER_CONTROL_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 +#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2 + +#define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2 +#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2 + +#define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2 +#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 + +#define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3 + +#define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3 + +/****************************************************************************/ +// Structures used by ### +/****************************************************************************/ +typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS +{ + UCHAR ucEnable; // Enable or Disable External TMDS encoder + UCHAR ucMisc; // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB} + UCHAR ucPadding[2]; +}ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS; + +typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION +{ + ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion +}ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION; + +#define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 + +typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 +{ + ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion +}ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2; + +typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION +{ + DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; +}EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION; + +/****************************************************************************/ +// Structures used by DVOEncoderControlTable +/****************************************************************************/ +//ucTableFormatRevision=1,ucTableContentRevision=3 + +//ucDVOConfig: +#define DVO_ENCODER_CONFIG_RATE_SEL 0x01 +#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00 +#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01 +#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c +#define DVO_ENCODER_CONFIG_LOW12BIT 0x00 +#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04 +#define DVO_ENCODER_CONFIG_24BIT 0x08 + +typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 +{ + USHORT usPixelClock; + UCHAR ucDVOConfig; + UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT + UCHAR ucReseved[4]; +}DVO_ENCODER_CONTROL_PARAMETERS_V3; +#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3 + +typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V1_4 +{ + USHORT usPixelClock; + UCHAR ucDVOConfig; + UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT + UCHAR ucBitPerColor; //please refer to definition of PANEL_xBIT_PER_COLOR + UCHAR ucReseved[3]; +}DVO_ENCODER_CONTROL_PARAMETERS_V1_4; +#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V1_4 DVO_ENCODER_CONTROL_PARAMETERS_V1_4 + + +//ucTableFormatRevision=1 +//ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for +// bit1=0: non-coherent mode +// =1: coherent mode + +//========================================================================================== +//Only change is here next time when changing encoder parameter definitions again! +#define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST LVDS_ENCODER_CONTROL_PARAMETERS_LAST + +#define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST + +#define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 +#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST + +#define DVO_ENCODER_CONTROL_PARAMETERS_LAST DVO_ENCODER_CONTROL_PARAMETERS +#define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST DVO_ENCODER_CONTROL_PS_ALLOCATION + +//========================================================================================== +#define PANEL_ENCODER_MISC_DUAL 0x01 +#define PANEL_ENCODER_MISC_COHERENT 0x02 +#define PANEL_ENCODER_MISC_TMDS_LINKB 0x04 +#define PANEL_ENCODER_MISC_HDMI_TYPE 0x08 + +#define PANEL_ENCODER_ACTION_DISABLE ATOM_DISABLE +#define PANEL_ENCODER_ACTION_ENABLE ATOM_ENABLE +#define PANEL_ENCODER_ACTION_COHERENTSEQ (ATOM_ENABLE+1) + +#define PANEL_ENCODER_TRUNCATE_EN 0x01 +#define PANEL_ENCODER_TRUNCATE_DEPTH 0x10 +#define PANEL_ENCODER_SPATIAL_DITHER_EN 0x01 +#define PANEL_ENCODER_SPATIAL_DITHER_DEPTH 0x10 +#define PANEL_ENCODER_TEMPORAL_DITHER_EN 0x01 +#define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH 0x10 +#define PANEL_ENCODER_TEMPORAL_LEVEL_4 0x20 +#define PANEL_ENCODER_25FRC_MASK 0x10 +#define PANEL_ENCODER_25FRC_E 0x00 +#define PANEL_ENCODER_25FRC_F 0x10 +#define PANEL_ENCODER_50FRC_MASK 0x60 +#define PANEL_ENCODER_50FRC_A 0x00 +#define PANEL_ENCODER_50FRC_B 0x20 +#define PANEL_ENCODER_50FRC_C 0x40 +#define PANEL_ENCODER_50FRC_D 0x60 +#define PANEL_ENCODER_75FRC_MASK 0x80 +#define PANEL_ENCODER_75FRC_E 0x00 +#define PANEL_ENCODER_75FRC_F 0x80 + +/****************************************************************************/ +// Structures used by SetVoltageTable +/****************************************************************************/ +#define SET_VOLTAGE_TYPE_ASIC_VDDC 1 +#define SET_VOLTAGE_TYPE_ASIC_MVDDC 2 +#define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3 +#define SET_VOLTAGE_TYPE_ASIC_VDDCI 4 +#define SET_VOLTAGE_INIT_MODE 5 +#define SET_VOLTAGE_GET_MAX_VOLTAGE 6 //Gets the Max. voltage for the soldered Asic + +#define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1 +#define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2 +#define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4 + +#define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0 +#define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1 +#define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2 + +typedef struct _SET_VOLTAGE_PARAMETERS +{ + UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ + UCHAR ucVoltageMode; // To set all, to set source A or source B or ... + UCHAR ucVoltageIndex; // An index to tell which voltage level + UCHAR ucReserved; +}SET_VOLTAGE_PARAMETERS; + +typedef struct _SET_VOLTAGE_PARAMETERS_V2 +{ + UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ + UCHAR ucVoltageMode; // Not used, maybe use for state machine for differen power mode + USHORT usVoltageLevel; // real voltage level +}SET_VOLTAGE_PARAMETERS_V2; + +// used by both SetVoltageTable v1.3 and v1.4 +typedef struct _SET_VOLTAGE_PARAMETERS_V1_3 +{ + UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI + UCHAR ucVoltageMode; // Indicate action: Set voltage level + USHORT usVoltageLevel; // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) +}SET_VOLTAGE_PARAMETERS_V1_3; + +//ucVoltageType +#define VOLTAGE_TYPE_VDDC 1 +#define VOLTAGE_TYPE_MVDDC 2 +#define VOLTAGE_TYPE_MVDDQ 3 +#define VOLTAGE_TYPE_VDDCI 4 + +//SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode +#define ATOM_SET_VOLTAGE 0 //Set voltage Level +#define ATOM_INIT_VOLTAGE_REGULATOR 3 //Init Regulator +#define ATOM_SET_VOLTAGE_PHASE 4 //Set Vregulator Phase, only for SVID/PVID regulator +#define ATOM_GET_MAX_VOLTAGE 6 //Get Max Voltage, not used from SetVoltageTable v1.3 +#define ATOM_GET_VOLTAGE_LEVEL 6 //Get Voltage level from vitual voltage ID, not used for SetVoltage v1.4 +#define ATOM_GET_LEAKAGE_ID 8 //Get Leakage Voltage Id ( starting from SMU7x IP ), SetVoltage v1.4 + +// define vitual voltage id in usVoltageLevel +#define ATOM_VIRTUAL_VOLTAGE_ID0 0xff01 +#define ATOM_VIRTUAL_VOLTAGE_ID1 0xff02 +#define ATOM_VIRTUAL_VOLTAGE_ID2 0xff03 +#define ATOM_VIRTUAL_VOLTAGE_ID3 0xff04 +#define ATOM_VIRTUAL_VOLTAGE_ID4 0xff05 +#define ATOM_VIRTUAL_VOLTAGE_ID5 0xff06 +#define ATOM_VIRTUAL_VOLTAGE_ID6 0xff07 +#define ATOM_VIRTUAL_VOLTAGE_ID7 0xff08 + +typedef struct _SET_VOLTAGE_PS_ALLOCATION +{ + SET_VOLTAGE_PARAMETERS sASICSetVoltage; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; +}SET_VOLTAGE_PS_ALLOCATION; + +// New Added from SI for GetVoltageInfoTable, input parameter structure +typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1 +{ + UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI + UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info + USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id + ULONG ulReserved; +}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1; + +// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID +typedef struct _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1 +{ + ULONG ulVotlageGpioState; + ULONG ulVoltageGPioMask; +}GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1; + +// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID +typedef struct _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1 +{ + USHORT usVoltageLevel; + USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator + ULONG ulReseved; +}GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1; + + +// GetVoltageInfo v1.1 ucVoltageMode +#define ATOM_GET_VOLTAGE_VID 0x00 +#define ATOM_GET_VOTLAGE_INIT_SEQ 0x03 +#define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID 0x04 +#define ATOM_GET_VOLTAGE_SVID2 0x07 //Get SVI2 Regulator Info + +// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state +#define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10 +// for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state +#define ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11 + +#define ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12 +#define ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13 + +// New Added from CI Hawaii for GetVoltageInfoTable, input parameter structure +typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2 +{ + UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI + UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info + USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id + ULONG ulSCLKFreq; // Input: when ucVoltageMode= ATOM_GET_VOLTAGE_EVV_VOLTAGE, DPM state SCLK frequency, Define in PPTable SCLK/Voltage dependence table +}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2; + +// New in GetVoltageInfo v1.2 ucVoltageMode +#define ATOM_GET_VOLTAGE_EVV_VOLTAGE 0x09 + +// New Added from CI Hawaii for EVV feature +typedef struct _GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2 +{ + USHORT usVoltageLevel; // real voltage level in unit of mv + USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator + ULONG ulReseved; +}GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2; + +/****************************************************************************/ +// Structures used by TVEncoderControlTable +/****************************************************************************/ +typedef struct _TV_ENCODER_CONTROL_PARAMETERS +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + UCHAR ucTvStandard; // See definition "ATOM_TV_NTSC ..." + UCHAR ucAction; // 0: turn off encoder + // 1: setup and turn on encoder +}TV_ENCODER_CONTROL_PARAMETERS; + +typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION +{ + TV_ENCODER_CONTROL_PARAMETERS sTVEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; // Don't set this one +}TV_ENCODER_CONTROL_PS_ALLOCATION; + +//==============================Data Table Portion==================================== + +/****************************************************************************/ +// Structure used in Data.mtb +/****************************************************************************/ +typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES +{ + USHORT UtilityPipeLine; // Offest for the utility to get parser info,Don't change this position! + USHORT MultimediaCapabilityInfo; // Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios + USHORT MultimediaConfigInfo; // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios + USHORT StandardVESA_Timing; // Only used by Bios + USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4 + USHORT PaletteData; // Only used by BIOS + USHORT LCD_Info; // Shared by various SW components,latest version 1.3, was called LVDS_Info + USHORT DIGTransmitterInfo; // Internal used by VBIOS only version 3.1 + USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1 + USHORT SupportedDevicesInfo; // Will be obsolete from R600 + USHORT GPIO_I2C_Info; // Shared by various SW components,latest version 1.2 will be used from R600 + USHORT VRAM_UsageByFirmware; // Shared by various SW components,latest version 1.3 will be used from R600 + USHORT GPIO_Pin_LUT; // Shared by various SW components,latest version 1.1 + USHORT VESA_ToInternalModeLUT; // Only used by Bios + USHORT ComponentVideoInfo; // Shared by various SW components,latest version 2.1 will be used from R600 + USHORT PowerPlayInfo; // Shared by various SW components,latest version 2.1,new design from R600 + USHORT CompassionateData; // Will be obsolete from R600 + USHORT SaveRestoreInfo; // Only used by Bios + USHORT PPLL_SS_Info; // Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info + USHORT OemInfo; // Defined and used by external SW, should be obsolete soon + USHORT XTMDS_Info; // Will be obsolete from R600 + USHORT MclkSS_Info; // Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used + USHORT Object_Header; // Shared by various SW components,latest version 1.1 + USHORT IndirectIOAccess; // Only used by Bios,this table position can't change at all!! + USHORT MC_InitParameter; // Only used by command table + USHORT ASIC_VDDC_Info; // Will be obsolete from R600 + USHORT ASIC_InternalSS_Info; // New tabel name from R600, used to be called "ASIC_MVDDC_Info" + USHORT TV_VideoMode; // Only used by command table + USHORT VRAM_Info; // Only used by command table, latest version 1.3 + USHORT MemoryTrainingInfo; // Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1 + USHORT IntegratedSystemInfo; // Shared by various SW components + USHORT ASIC_ProfilingInfo; // New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600 + USHORT VoltageObjectInfo; // Shared by various SW components, latest version 1.1 + USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1 +}ATOM_MASTER_LIST_OF_DATA_TABLES; + +typedef struct _ATOM_MASTER_DATA_TABLE +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables; +}ATOM_MASTER_DATA_TABLE; + +// For backward compatible +#define LVDS_Info LCD_Info +#define DAC_Info PaletteData +#define TMDS_Info DIGTransmitterInfo + +/****************************************************************************/ +// Structure used in MultimediaCapabilityInfoTable +/****************************************************************************/ +typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulSignature; // HW info table signature string "$ATI" + UCHAR ucI2C_Type; // I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc) + UCHAR ucTV_OutInfo; // Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7) + UCHAR ucVideoPortInfo; // Provides the video port capabilities + UCHAR ucHostPortInfo; // Provides host port configuration information +}ATOM_MULTIMEDIA_CAPABILITY_INFO; + +/****************************************************************************/ +// Structure used in MultimediaConfigInfoTable +/****************************************************************************/ +typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulSignature; // MM info table signature sting "$MMT" + UCHAR ucTunerInfo; // Type of tuner installed on the adapter (4:0) and video input for tuner (7:5) + UCHAR ucAudioChipInfo; // List the audio chip type (3:0) product type (4) and OEM revision (7:5) + UCHAR ucProductID; // Defines as OEM ID or ATI board ID dependent on product type setting + UCHAR ucMiscInfo1; // Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7) + UCHAR ucMiscInfo2; // I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6) + UCHAR ucMiscInfo3; // Video Decoder Type (3:0) Video In Standard/Crystal (7:4) + UCHAR ucMiscInfo4; // Video Decoder Host Config (2:0) reserved (7:3) + UCHAR ucVideoInput0Info;// Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) + UCHAR ucVideoInput1Info;// Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) + UCHAR ucVideoInput2Info;// Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) + UCHAR ucVideoInput3Info;// Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) + UCHAR ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) +}ATOM_MULTIMEDIA_CONFIG_INFO; + + +/****************************************************************************/ +// Structures used in FirmwareInfoTable +/****************************************************************************/ + +// usBIOSCapability Definition: +// Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; +// Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; +// Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; +// Others: Reserved +#define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED 0x0001 +#define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT 0x0002 +#define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT 0x0004 +#define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT 0x0008 // (valid from v1.1 ~v1.4):=1: memclk SS enable, =0 memclk SS disable. +#define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT 0x0010 // (valid from v1.1 ~v1.4):=1: engclk SS enable, =0 engclk SS disable. +#define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU 0x0020 +#define ATOM_BIOS_INFO_WMI_SUPPORT 0x0040 +#define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM 0x0080 +#define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT 0x0100 +#define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK 0x1E00 +#define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000 +#define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE 0x4000 +#define ATOM_BIOS_INFO_MEMORY_CLOCK_EXT_SS_SUPPORT 0x0008 // (valid from v2.1 ): =1: memclk ss enable with external ss chip +#define ATOM_BIOS_INFO_ENGINE_CLOCK_EXT_SS_SUPPORT 0x0010 // (valid from v2.1 ): =1: engclk ss enable with external ss chip + +#ifndef _H2INC + +//Please don't add or expand this bitfield structure below, this one will retire soon.! +typedef struct _ATOM_FIRMWARE_CAPABILITY +{ +#if ATOM_BIG_ENDIAN + USHORT Reserved:1; + USHORT SCL2Redefined:1; + USHORT PostWithoutModeSet:1; + USHORT HyperMemory_Size:4; + USHORT HyperMemory_Support:1; + USHORT PPMode_Assigned:1; + USHORT WMI_SUPPORT:1; + USHORT GPUControlsBL:1; + USHORT EngineClockSS_Support:1; + USHORT MemoryClockSS_Support:1; + USHORT ExtendedDesktopSupport:1; + USHORT DualCRTC_Support:1; + USHORT FirmwarePosted:1; +#else + USHORT FirmwarePosted:1; + USHORT DualCRTC_Support:1; + USHORT ExtendedDesktopSupport:1; + USHORT MemoryClockSS_Support:1; + USHORT EngineClockSS_Support:1; + USHORT GPUControlsBL:1; + USHORT WMI_SUPPORT:1; + USHORT PPMode_Assigned:1; + USHORT HyperMemory_Support:1; + USHORT HyperMemory_Size:4; + USHORT PostWithoutModeSet:1; + USHORT SCL2Redefined:1; + USHORT Reserved:1; +#endif +}ATOM_FIRMWARE_CAPABILITY; + +typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS +{ + ATOM_FIRMWARE_CAPABILITY sbfAccess; + USHORT susAccess; +}ATOM_FIRMWARE_CAPABILITY_ACCESS; + +#else + +typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS +{ + USHORT susAccess; +}ATOM_FIRMWARE_CAPABILITY_ACCESS; + +#endif + +typedef struct _ATOM_FIRMWARE_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; //In 10Khz unit + ULONG ulDefaultMemoryClock; //In 10Khz unit + ULONG ulDriverTargetEngineClock; //In 10Khz unit + ULONG ulDriverTargetMemoryClock; //In 10Khz unit + ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit + ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit + ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit + ULONG ulASICMaxEngineClock; //In 10Khz unit + ULONG ulASICMaxMemoryClock; //In 10Khz unit + UCHAR ucASICMaxTemperature; + UCHAR ucPadding[3]; //Don't use them + ULONG aulReservedForBIOS[3]; //Don't use them + USHORT usMinEngineClockPLL_Input; //In 10Khz unit + USHORT usMaxEngineClockPLL_Input; //In 10Khz unit + USHORT usMinEngineClockPLL_Output; //In 10Khz unit + USHORT usMinMemoryClockPLL_Input; //In 10Khz unit + USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit + USHORT usMinMemoryClockPLL_Output; //In 10Khz unit + USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk + USHORT usMinPixelClockPLL_Input; //In 10Khz unit + USHORT usMaxPixelClockPLL_Input; //In 10Khz unit + USHORT usMinPixelClockPLL_Output; //In 10Khz unit, the definitions above can't change!!! + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usReferenceClock; //In 10Khz unit + USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit + UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit + UCHAR ucDesign_ID; //Indicate what is the board design + UCHAR ucMemoryModule_ID; //Indicate what is the board design +}ATOM_FIRMWARE_INFO; + +typedef struct _ATOM_FIRMWARE_INFO_V1_2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; //In 10Khz unit + ULONG ulDefaultMemoryClock; //In 10Khz unit + ULONG ulDriverTargetEngineClock; //In 10Khz unit + ULONG ulDriverTargetMemoryClock; //In 10Khz unit + ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit + ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit + ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit + ULONG ulASICMaxEngineClock; //In 10Khz unit + ULONG ulASICMaxMemoryClock; //In 10Khz unit + UCHAR ucASICMaxTemperature; + UCHAR ucMinAllowedBL_Level; + UCHAR ucPadding[2]; //Don't use them + ULONG aulReservedForBIOS[2]; //Don't use them + ULONG ulMinPixelClockPLL_Output; //In 10Khz unit + USHORT usMinEngineClockPLL_Input; //In 10Khz unit + USHORT usMaxEngineClockPLL_Input; //In 10Khz unit + USHORT usMinEngineClockPLL_Output; //In 10Khz unit + USHORT usMinMemoryClockPLL_Input; //In 10Khz unit + USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit + USHORT usMinMemoryClockPLL_Output; //In 10Khz unit + USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk + USHORT usMinPixelClockPLL_Input; //In 10Khz unit + USHORT usMaxPixelClockPLL_Input; //In 10Khz unit + USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usReferenceClock; //In 10Khz unit + USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit + UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit + UCHAR ucDesign_ID; //Indicate what is the board design + UCHAR ucMemoryModule_ID; //Indicate what is the board design +}ATOM_FIRMWARE_INFO_V1_2; + +typedef struct _ATOM_FIRMWARE_INFO_V1_3 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; //In 10Khz unit + ULONG ulDefaultMemoryClock; //In 10Khz unit + ULONG ulDriverTargetEngineClock; //In 10Khz unit + ULONG ulDriverTargetMemoryClock; //In 10Khz unit + ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit + ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit + ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit + ULONG ulASICMaxEngineClock; //In 10Khz unit + ULONG ulASICMaxMemoryClock; //In 10Khz unit + UCHAR ucASICMaxTemperature; + UCHAR ucMinAllowedBL_Level; + UCHAR ucPadding[2]; //Don't use them + ULONG aulReservedForBIOS; //Don't use them + ULONG ul3DAccelerationEngineClock;//In 10Khz unit + ULONG ulMinPixelClockPLL_Output; //In 10Khz unit + USHORT usMinEngineClockPLL_Input; //In 10Khz unit + USHORT usMaxEngineClockPLL_Input; //In 10Khz unit + USHORT usMinEngineClockPLL_Output; //In 10Khz unit + USHORT usMinMemoryClockPLL_Input; //In 10Khz unit + USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit + USHORT usMinMemoryClockPLL_Output; //In 10Khz unit + USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk + USHORT usMinPixelClockPLL_Input; //In 10Khz unit + USHORT usMaxPixelClockPLL_Input; //In 10Khz unit + USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usReferenceClock; //In 10Khz unit + USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit + UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit + UCHAR ucDesign_ID; //Indicate what is the board design + UCHAR ucMemoryModule_ID; //Indicate what is the board design +}ATOM_FIRMWARE_INFO_V1_3; + +typedef struct _ATOM_FIRMWARE_INFO_V1_4 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; //In 10Khz unit + ULONG ulDefaultMemoryClock; //In 10Khz unit + ULONG ulDriverTargetEngineClock; //In 10Khz unit + ULONG ulDriverTargetMemoryClock; //In 10Khz unit + ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit + ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit + ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit + ULONG ulASICMaxEngineClock; //In 10Khz unit + ULONG ulASICMaxMemoryClock; //In 10Khz unit + UCHAR ucASICMaxTemperature; + UCHAR ucMinAllowedBL_Level; + USHORT usBootUpVDDCVoltage; //In MV unit + USHORT usLcdMinPixelClockPLL_Output; // In MHz unit + USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit + ULONG ul3DAccelerationEngineClock;//In 10Khz unit + ULONG ulMinPixelClockPLL_Output; //In 10Khz unit + USHORT usMinEngineClockPLL_Input; //In 10Khz unit + USHORT usMaxEngineClockPLL_Input; //In 10Khz unit + USHORT usMinEngineClockPLL_Output; //In 10Khz unit + USHORT usMinMemoryClockPLL_Input; //In 10Khz unit + USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit + USHORT usMinMemoryClockPLL_Output; //In 10Khz unit + USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk + USHORT usMinPixelClockPLL_Input; //In 10Khz unit + USHORT usMaxPixelClockPLL_Input; //In 10Khz unit + USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usReferenceClock; //In 10Khz unit + USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit + UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit + UCHAR ucDesign_ID; //Indicate what is the board design + UCHAR ucMemoryModule_ID; //Indicate what is the board design +}ATOM_FIRMWARE_INFO_V1_4; + +//the structure below to be used from Cypress +typedef struct _ATOM_FIRMWARE_INFO_V2_1 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; //In 10Khz unit + ULONG ulDefaultMemoryClock; //In 10Khz unit + ULONG ulReserved1; + ULONG ulReserved2; + ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit + ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit + ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit + ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock + ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit + UCHAR ucReserved1; //Was ucASICMaxTemperature; + UCHAR ucMinAllowedBL_Level; + USHORT usBootUpVDDCVoltage; //In MV unit + USHORT usLcdMinPixelClockPLL_Output; // In MHz unit + USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit + ULONG ulReserved4; //Was ulAsicMaximumVoltage + ULONG ulMinPixelClockPLL_Output; //In 10Khz unit + USHORT usMinEngineClockPLL_Input; //In 10Khz unit + USHORT usMaxEngineClockPLL_Input; //In 10Khz unit + USHORT usMinEngineClockPLL_Output; //In 10Khz unit + USHORT usMinMemoryClockPLL_Input; //In 10Khz unit + USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit + USHORT usMinMemoryClockPLL_Output; //In 10Khz unit + USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk + USHORT usMinPixelClockPLL_Input; //In 10Khz unit + USHORT usMaxPixelClockPLL_Input; //In 10Khz unit + USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usCoreReferenceClock; //In 10Khz unit + USHORT usMemoryReferenceClock; //In 10Khz unit + USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock + UCHAR ucMemoryModule_ID; //Indicate what is the board design + UCHAR ucReserved4[3]; +}ATOM_FIRMWARE_INFO_V2_1; + +//the structure below to be used from NI +//ucTableFormatRevision=2 +//ucTableContentRevision=2 +typedef struct _ATOM_FIRMWARE_INFO_V2_2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; //In 10Khz unit + ULONG ulDefaultMemoryClock; //In 10Khz unit + ULONG ulSPLL_OutputFreq; //In 10Khz unit + ULONG ulGPUPLL_OutputFreq; //In 10Khz unit + ULONG ulReserved1; //Was ulMaxEngineClockPLL_Output; //In 10Khz unit* + ULONG ulReserved2; //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit* + ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit + ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock ? + ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit. This is the frequency before DCDTO, corresponding to usBootUpVDDCVoltage. + UCHAR ucReserved3; //Was ucASICMaxTemperature; + UCHAR ucMinAllowedBL_Level; + USHORT usBootUpVDDCVoltage; //In MV unit + USHORT usLcdMinPixelClockPLL_Output; // In MHz unit + USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit + ULONG ulReserved4; //Was ulAsicMaximumVoltage + ULONG ulMinPixelClockPLL_Output; //In 10Khz unit + UCHAR ucRemoteDisplayConfig; + UCHAR ucReserved5[3]; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input + ULONG ulReserved6; //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input + ULONG ulReserved7; //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output + USHORT usReserved11; //Was usMaxPixelClock; //In 10Khz unit, Max. Pclk used only for DAC + USHORT usMinPixelClockPLL_Input; //In 10Khz unit + USHORT usMaxPixelClockPLL_Input; //In 10Khz unit + USHORT usBootUpVDDCIVoltage; //In unit of mv; Was usMinPixelClockPLL_Output; + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usCoreReferenceClock; //In 10Khz unit + USHORT usMemoryReferenceClock; //In 10Khz unit + USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock + UCHAR ucMemoryModule_ID; //Indicate what is the board design + UCHAR ucReserved9[3]; + USHORT usBootUpMVDDCVoltage; //In unit of mv; Was usMinPixelClockPLL_Output; + USHORT usReserved12; + ULONG ulReserved10[3]; // New added comparing to previous version +}ATOM_FIRMWARE_INFO_V2_2; + +#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_2 + + +// definition of ucRemoteDisplayConfig +#define REMOTE_DISPLAY_DISABLE 0x00 +#define REMOTE_DISPLAY_ENABLE 0x01 + +/****************************************************************************/ +// Structures used in IntegratedSystemInfoTable +/****************************************************************************/ +#define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2 +#define IGP_CAP_FLAG_AC_CARD 0x4 +#define IGP_CAP_FLAG_SDVO_CARD 0x8 +#define IGP_CAP_FLAG_POSTDIV_BY_2_MODE 0x10 + +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; //in 10kHz unit + ULONG ulBootUpMemoryClock; //in 10kHz unit + ULONG ulMaxSystemMemoryClock; //in 10kHz unit + ULONG ulMinSystemMemoryClock; //in 10kHz unit + UCHAR ucNumberOfCyclesInPeriodHi; + UCHAR ucLCDTimingSel; //=0:not valid.!=0 sel this timing descriptor from LCD EDID. + USHORT usReserved1; + USHORT usInterNBVoltageLow; //An intermidiate PMW value to set the voltage + USHORT usInterNBVoltageHigh; //Another intermidiate PMW value to set the voltage + ULONG ulReserved[2]; + + USHORT usFSBClock; //In MHz unit + USHORT usCapabilityFlag; //Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable + //Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card + //Bit[4]==1: P/2 mode, ==0: P/1 mode + USHORT usPCIENBCfgReg7; //bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal + USHORT usK8MemoryClock; //in MHz unit + USHORT usK8SyncStartDelay; //in 0.01 us unit + USHORT usK8DataReturnTime; //in 0.01 us unit + UCHAR ucMaxNBVoltage; + UCHAR ucMinNBVoltage; + UCHAR ucMemoryType; //[7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved + UCHAR ucNumberOfCyclesInPeriod; //CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod + UCHAR ucStartingPWM_HighTime; //CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime + UCHAR ucHTLinkWidth; //16 bit vs. 8 bit + UCHAR ucMaxNBVoltageHigh; + UCHAR ucMinNBVoltageHigh; +}ATOM_INTEGRATED_SYSTEM_INFO; + +/* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO +ulBootUpMemoryClock: For Intel IGP,it's the UMA system memory clock + For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock +ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0 + For AMD IGP,for now this can be 0 +ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0 + For AMD IGP,for now this can be 0 + +usFSBClock: For Intel IGP,it's FSB Freq + For AMD IGP,it's HT Link Speed + +usK8MemoryClock: For AMD IGP only. For RevF CPU, set it to 200 +usK8SyncStartDelay: For AMD IGP only. Memory access latency in K8, required for watermark calculation +usK8DataReturnTime: For AMD IGP only. Memory access latency in K8, required for watermark calculation + +VC:Voltage Control +ucMaxNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all. +ucMinNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all. + +ucNumberOfCyclesInPeriod: Indicate how many cycles when PWM duty is 100%. low 8 bits of the value. +ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0 + +ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all. +ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all. + + +usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all. +usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all. +*/ + + +/* +The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST; +Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need. +The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries. + +SW components can access the IGP system infor structure in the same way as before +*/ + + +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; //in 10kHz unit + ULONG ulReserved1[2]; //must be 0x0 for the reserved + ULONG ulBootUpUMAClock; //in 10kHz unit + ULONG ulBootUpSidePortClock; //in 10kHz unit + ULONG ulMinSidePortClock; //in 10kHz unit + ULONG ulReserved2[6]; //must be 0x0 for the reserved + ULONG ulSystemConfig; //see explanation below + ULONG ulBootUpReqDisplayVector; + ULONG ulOtherDisplayMisc; + ULONG ulDDISlot1Config; + ULONG ulDDISlot2Config; + UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved + UCHAR ucUMAChannelNumber; + UCHAR ucDockingPinBit; + UCHAR ucDockingPinPolarity; + ULONG ulDockingPinCFGInfo; + ULONG ulCPUCapInfo; + USHORT usNumberOfCyclesInPeriod; + USHORT usMaxNBVoltage; + USHORT usMinNBVoltage; + USHORT usBootUpNBVoltage; + ULONG ulHTLinkFreq; //in 10Khz + USHORT usMinHTLinkWidth; + USHORT usMaxHTLinkWidth; + USHORT usUMASyncStartDelay; + USHORT usUMADataReturnTime; + USHORT usLinkStatusZeroTime; + USHORT usDACEfuse; //for storing badgap value (for RS880 only) + ULONG ulHighVoltageHTLinkFreq; // in 10Khz + ULONG ulLowVoltageHTLinkFreq; // in 10Khz + USHORT usMaxUpStreamHTLinkWidth; + USHORT usMaxDownStreamHTLinkWidth; + USHORT usMinUpStreamHTLinkWidth; + USHORT usMinDownStreamHTLinkWidth; + USHORT usFirmwareVersion; //0 means FW is not supported. Otherwise it's the FW version loaded by SBIOS and driver should enable FW. + USHORT usFullT0Time; // Input to calculate minimum HT link change time required by NB P-State. Unit is 0.01us. + ULONG ulReserved3[96]; //must be 0x0 +}ATOM_INTEGRATED_SYSTEM_INFO_V2; + +/* +ulBootUpEngineClock: Boot-up Engine Clock in 10Khz; +ulBootUpUMAClock: Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present +ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock + +ulSystemConfig: +Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode; +Bit[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state + =0: system boots up at driver control state. Power state depends on PowerPlay table. +Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used. +Bit[3]=1: Only one power state(Performance) will be supported. + =0: Multiple power states supported from PowerPlay table. +Bit[4]=1: CLMC is supported and enabled on current system. + =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface. +Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement. + =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied. +Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored. + =0: Voltage settings is determined by powerplay table. +Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue. + =0: Enable CLMC as regular mode, CDLD and CILR will be enabled. +Bit[8]=1: CDLF is supported and enabled on current system. + =0: CDLF is not supported or enabled on current system. +Bit[9]=1: DLL Shut Down feature is enabled on current system. + =0: DLL Shut Down feature is not enabled or supported on current system. + +ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions. + +ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion; + [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSupportedStd definition; + +ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design). + [3:0] - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12) + [7:4] - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 4=1 lane 3:0; bit 5=1 lane 7:4; bit 6=1 lane 11:8; bit 7=1 lane 15:12) + When a DDI connector is not "paired" (meaming two connections mutualexclusive on chassis or docking, only one of them can be connected at one time. + in both chassis and docking, SBIOS has to duplicate the same PCIE lane info from chassis to docking or vice versa. For example: + one DDI connector is only populated in docking with PCIE lane 8-11, but there is no paired connection on chassis, SBIOS has to copy bit 6 to bit 2. + + [15:8] - Lane configuration attribute; + [23:16]- Connector type, possible value: + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D + CONNECTOR_OBJECT_ID_HDMI_TYPE_A + CONNECTOR_OBJECT_ID_DISPLAYPORT + CONNECTOR_OBJECT_ID_eDP + [31:24]- Reserved + +ulDDISlot2Config: Same as Slot1. +ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC. +For IGP, Hypermemory is the only memory type showed in CCC. + +ucUMAChannelNumber: how many channels for the UMA; + +ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin +ucDockingPinBit: which bit in this register to read the pin status; +ucDockingPinPolarity:Polarity of the pin when docked; + +ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, [7:0]=4:Pharaoh, other bits reserved for now and must be 0x0 + +usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%. + +usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode. +usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode. + GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0 + PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1 + GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE + +usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value. + +ulHTLinkFreq: Bootup HT link Frequency in 10Khz. +usMinHTLinkWidth: Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth. + If CDLW enabled, both upstream and downstream width should be the same during bootup. +usMaxHTLinkWidth: Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth. + If CDLW enabled, both upstream and downstream width should be the same during bootup. + +usUMASyncStartDelay: Memory access latency, required for watermark calculation +usUMADataReturnTime: Memory access latency, required for watermark calculation +usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us +for Griffin or Greyhound. SBIOS needs to convert to actual time by: + if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us) + if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us) + if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us) + if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us) + +ulHighVoltageHTLinkFreq: HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0. + This must be less than or equal to ulHTLinkFreq(bootup frequency). +ulLowVoltageHTLinkFreq: HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0. + This must be less than or equal to ulHighVoltageHTLinkFreq. + +usMaxUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now. +usMaxDownStreamHTLinkWidth: same as above. +usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now. +usMinDownStreamHTLinkWidth: same as above. +*/ + +// ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo - CPU type definition +#define INTEGRATED_SYSTEM_INFO__UNKNOWN_CPU 0 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__GRIFFIN 1 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND 2 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__K8 3 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH 4 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI 5 + +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI // this deff reflects max defined CPU code + +#define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001 +#define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002 +#define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004 +#define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008 +#define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010 +#define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020 +#define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040 +#define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080 +#define SYSTEM_CONFIG_CDLF_ENABLED 0x00000100 +#define SYSTEM_CONFIG_DLL_SHUTDOWN_ENABLED 0x00000200 + +#define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF + +#define b0IGP_DDI_SLOT_LANE_MAP_MASK 0x0F +#define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK 0xF0 +#define b0IGP_DDI_SLOT_CONFIG_LANE_0_3 0x01 +#define b0IGP_DDI_SLOT_CONFIG_LANE_4_7 0x02 +#define b0IGP_DDI_SLOT_CONFIG_LANE_8_11 0x04 +#define b0IGP_DDI_SLOT_CONFIG_LANE_12_15 0x08 + +#define IGP_DDI_SLOT_ATTRIBUTE_MASK 0x0000FF00 +#define IGP_DDI_SLOT_CONFIG_REVERSED 0x00000100 +#define b1IGP_DDI_SLOT_CONFIG_REVERSED 0x01 + +#define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK 0x00FF0000 + +// IntegratedSystemInfoTable new Rev is V5 after V2, because of the real rev of V2 is v1.4. This rev is used for RR +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; //in 10kHz unit + ULONG ulDentistVCOFreq; //Dentist VCO clock in 10kHz unit, the source of GPU SCLK, LCLK, UCLK and VCLK. + ULONG ulLClockFreq; //GPU Lclk freq in 10kHz unit, have relationship with NCLK in NorthBridge + ULONG ulBootUpUMAClock; //in 10kHz unit + ULONG ulReserved1[8]; //must be 0x0 for the reserved + ULONG ulBootUpReqDisplayVector; + ULONG ulOtherDisplayMisc; + ULONG ulReserved2[4]; //must be 0x0 for the reserved + ULONG ulSystemConfig; //TBD + ULONG ulCPUCapInfo; //TBD + USHORT usMaxNBVoltage; //high NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse; + USHORT usMinNBVoltage; //low NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse; + USHORT usBootUpNBVoltage; //boot up NB voltage + UCHAR ucHtcTmpLmt; //bit [22:16] of D24F3x64 Hardware Thermal Control (HTC) Register, may not be needed, TBD + UCHAR ucTjOffset; //bit [28:22] of D24F3xE4 Thermtrip Status Register,may not be needed, TBD + ULONG ulReserved3[4]; //must be 0x0 for the reserved + ULONG ulDDISlot1Config; //see above ulDDISlot1Config definition + ULONG ulDDISlot2Config; + ULONG ulDDISlot3Config; + ULONG ulDDISlot4Config; + ULONG ulReserved4[4]; //must be 0x0 for the reserved + UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved + UCHAR ucUMAChannelNumber; + USHORT usReserved; + ULONG ulReserved5[4]; //must be 0x0 for the reserved + ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10];//arrays with values for CSR M3 arbiter for default + ULONG ulCSR_M3_ARB_CNTL_UVD[10]; //arrays with values for CSR M3 arbiter for UVD playback + ULONG ulCSR_M3_ARB_CNTL_FS3D[10];//arrays with values for CSR M3 arbiter for Full Screen 3D applications + ULONG ulReserved6[61]; //must be 0x0 +}ATOM_INTEGRATED_SYSTEM_INFO_V5; + +#define ATOM_CRT_INT_ENCODER1_INDEX 0x00000000 +#define ATOM_LCD_INT_ENCODER1_INDEX 0x00000001 +#define ATOM_TV_INT_ENCODER1_INDEX 0x00000002 +#define ATOM_DFP_INT_ENCODER1_INDEX 0x00000003 +#define ATOM_CRT_INT_ENCODER2_INDEX 0x00000004 +#define ATOM_LCD_EXT_ENCODER1_INDEX 0x00000005 +#define ATOM_TV_EXT_ENCODER1_INDEX 0x00000006 +#define ATOM_DFP_EXT_ENCODER1_INDEX 0x00000007 +#define ATOM_CV_INT_ENCODER1_INDEX 0x00000008 +#define ATOM_DFP_INT_ENCODER2_INDEX 0x00000009 +#define ATOM_CRT_EXT_ENCODER1_INDEX 0x0000000A +#define ATOM_CV_EXT_ENCODER1_INDEX 0x0000000B +#define ATOM_DFP_INT_ENCODER3_INDEX 0x0000000C +#define ATOM_DFP_INT_ENCODER4_INDEX 0x0000000D + +// define ASIC internal encoder id ( bit vector ), used for CRTC_SourceSelTable +#define ASIC_INT_DAC1_ENCODER_ID 0x00 +#define ASIC_INT_TV_ENCODER_ID 0x02 +#define ASIC_INT_DIG1_ENCODER_ID 0x03 +#define ASIC_INT_DAC2_ENCODER_ID 0x04 +#define ASIC_EXT_TV_ENCODER_ID 0x06 +#define ASIC_INT_DVO_ENCODER_ID 0x07 +#define ASIC_INT_DIG2_ENCODER_ID 0x09 +#define ASIC_EXT_DIG_ENCODER_ID 0x05 +#define ASIC_EXT_DIG2_ENCODER_ID 0x08 +#define ASIC_INT_DIG3_ENCODER_ID 0x0a +#define ASIC_INT_DIG4_ENCODER_ID 0x0b +#define ASIC_INT_DIG5_ENCODER_ID 0x0c +#define ASIC_INT_DIG6_ENCODER_ID 0x0d +#define ASIC_INT_DIG7_ENCODER_ID 0x0e + +//define Encoder attribute +#define ATOM_ANALOG_ENCODER 0 +#define ATOM_DIGITAL_ENCODER 1 +#define ATOM_DP_ENCODER 2 + +#define ATOM_ENCODER_ENUM_MASK 0x70 +#define ATOM_ENCODER_ENUM_ID1 0x00 +#define ATOM_ENCODER_ENUM_ID2 0x10 +#define ATOM_ENCODER_ENUM_ID3 0x20 +#define ATOM_ENCODER_ENUM_ID4 0x30 +#define ATOM_ENCODER_ENUM_ID5 0x40 +#define ATOM_ENCODER_ENUM_ID6 0x50 + +#define ATOM_DEVICE_CRT1_INDEX 0x00000000 +#define ATOM_DEVICE_LCD1_INDEX 0x00000001 +#define ATOM_DEVICE_TV1_INDEX 0x00000002 +#define ATOM_DEVICE_DFP1_INDEX 0x00000003 +#define ATOM_DEVICE_CRT2_INDEX 0x00000004 +#define ATOM_DEVICE_LCD2_INDEX 0x00000005 +#define ATOM_DEVICE_DFP6_INDEX 0x00000006 +#define ATOM_DEVICE_DFP2_INDEX 0x00000007 +#define ATOM_DEVICE_CV_INDEX 0x00000008 +#define ATOM_DEVICE_DFP3_INDEX 0x00000009 +#define ATOM_DEVICE_DFP4_INDEX 0x0000000A +#define ATOM_DEVICE_DFP5_INDEX 0x0000000B + +#define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C +#define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D +#define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E +#define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F +#define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1) +#define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO +#define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1 ) + +#define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1) + +#define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX ) +#define ATOM_DEVICE_LCD1_SUPPORT (0x1L << ATOM_DEVICE_LCD1_INDEX ) +#define ATOM_DEVICE_TV1_SUPPORT (0x1L << ATOM_DEVICE_TV1_INDEX ) +#define ATOM_DEVICE_DFP1_SUPPORT (0x1L << ATOM_DEVICE_DFP1_INDEX ) +#define ATOM_DEVICE_CRT2_SUPPORT (0x1L << ATOM_DEVICE_CRT2_INDEX ) +#define ATOM_DEVICE_LCD2_SUPPORT (0x1L << ATOM_DEVICE_LCD2_INDEX ) +#define ATOM_DEVICE_DFP6_SUPPORT (0x1L << ATOM_DEVICE_DFP6_INDEX ) +#define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX ) +#define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX ) +#define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX ) +#define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX ) +#define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX ) + +#define ATOM_DEVICE_CRT_SUPPORT (ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT) +#define ATOM_DEVICE_DFP_SUPPORT (ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | ATOM_DEVICE_DFP5_SUPPORT | ATOM_DEVICE_DFP6_SUPPORT) +#define ATOM_DEVICE_TV_SUPPORT (ATOM_DEVICE_TV1_SUPPORT) +#define ATOM_DEVICE_LCD_SUPPORT (ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT) + +#define ATOM_DEVICE_CONNECTOR_TYPE_MASK 0x000000F0 +#define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT 0x00000004 +#define ATOM_DEVICE_CONNECTOR_VGA 0x00000001 +#define ATOM_DEVICE_CONNECTOR_DVI_I 0x00000002 +#define ATOM_DEVICE_CONNECTOR_DVI_D 0x00000003 +#define ATOM_DEVICE_CONNECTOR_DVI_A 0x00000004 +#define ATOM_DEVICE_CONNECTOR_SVIDEO 0x00000005 +#define ATOM_DEVICE_CONNECTOR_COMPOSITE 0x00000006 +#define ATOM_DEVICE_CONNECTOR_LVDS 0x00000007 +#define ATOM_DEVICE_CONNECTOR_DIGI_LINK 0x00000008 +#define ATOM_DEVICE_CONNECTOR_SCART 0x00000009 +#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A 0x0000000A +#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B 0x0000000B +#define ATOM_DEVICE_CONNECTOR_CASE_1 0x0000000E +#define ATOM_DEVICE_CONNECTOR_DISPLAYPORT 0x0000000F + + +#define ATOM_DEVICE_DAC_INFO_MASK 0x0000000F +#define ATOM_DEVICE_DAC_INFO_SHIFT 0x00000000 +#define ATOM_DEVICE_DAC_INFO_NODAC 0x00000000 +#define ATOM_DEVICE_DAC_INFO_DACA 0x00000001 +#define ATOM_DEVICE_DAC_INFO_DACB 0x00000002 +#define ATOM_DEVICE_DAC_INFO_EXDAC 0x00000003 + +#define ATOM_DEVICE_I2C_ID_NOI2C 0x00000000 + +#define ATOM_DEVICE_I2C_LINEMUX_MASK 0x0000000F +#define ATOM_DEVICE_I2C_LINEMUX_SHIFT 0x00000000 + +#define ATOM_DEVICE_I2C_ID_MASK 0x00000070 +#define ATOM_DEVICE_I2C_ID_SHIFT 0x00000004 +#define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE 0x00000001 +#define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE 0x00000002 +#define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE 0x00000003 //For IGP RS600 +#define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL 0x00000004 //For IGP RS690 + +#define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK 0x00000080 +#define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT 0x00000007 +#define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C 0x00000000 +#define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C 0x00000001 + +// usDeviceSupport: +// Bits0 = 0 - no CRT1 support= 1- CRT1 is supported +// Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported +// Bit 2 = 0 - no TV1 support= 1- TV1 is supported +// Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported +// Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported +// Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported +// Bit 6 = 0 - no DFP6 support= 1- DFP6 is supported +// Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported +// Bit 8 = 0 - no CV support= 1- CV is supported +// Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported +// Bit 10 = 0 - no DFP4 support= 1- DFP4 is supported +// Bit 11 = 0 - no DFP5 support= 1- DFP5 is supported +// +// + +/****************************************************************************/ +/* Structure used in MclkSS_InfoTable */ +/****************************************************************************/ +// ucI2C_ConfigID +// [7:0] - I2C LINE Associate ID +// = 0 - no I2C +// [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection) +// = 0, [6:0]=SW assisted I2C ID +// [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use +// = 2, HW engine for Multimedia use +// = 3-7 Reserved for future I2C engines +// [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C + +typedef struct _ATOM_I2C_ID_CONFIG +{ +#if ATOM_BIG_ENDIAN + UCHAR bfHW_Capable:1; + UCHAR bfHW_EngineID:3; + UCHAR bfI2C_LineMux:4; +#else + UCHAR bfI2C_LineMux:4; + UCHAR bfHW_EngineID:3; + UCHAR bfHW_Capable:1; +#endif +}ATOM_I2C_ID_CONFIG; + +typedef union _ATOM_I2C_ID_CONFIG_ACCESS +{ + ATOM_I2C_ID_CONFIG sbfAccess; + UCHAR ucAccess; +}ATOM_I2C_ID_CONFIG_ACCESS; + + +/****************************************************************************/ +// Structure used in GPIO_I2C_InfoTable +/****************************************************************************/ +typedef struct _ATOM_GPIO_I2C_ASSIGMENT +{ + USHORT usClkMaskRegisterIndex; + USHORT usClkEnRegisterIndex; + USHORT usClkY_RegisterIndex; + USHORT usClkA_RegisterIndex; + USHORT usDataMaskRegisterIndex; + USHORT usDataEnRegisterIndex; + USHORT usDataY_RegisterIndex; + USHORT usDataA_RegisterIndex; + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; + UCHAR ucClkMaskShift; + UCHAR ucClkEnShift; + UCHAR ucClkY_Shift; + UCHAR ucClkA_Shift; + UCHAR ucDataMaskShift; + UCHAR ucDataEnShift; + UCHAR ucDataY_Shift; + UCHAR ucDataA_Shift; + UCHAR ucReserved1; + UCHAR ucReserved2; +}ATOM_GPIO_I2C_ASSIGMENT; + +typedef struct _ATOM_GPIO_I2C_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE]; +}ATOM_GPIO_I2C_INFO; + +/****************************************************************************/ +// Common Structure used in other structures +/****************************************************************************/ + +#ifndef _H2INC + +//Please don't add or expand this bitfield structure below, this one will retire soon.! +typedef struct _ATOM_MODE_MISC_INFO +{ +#if ATOM_BIG_ENDIAN + USHORT Reserved:6; + USHORT RGB888:1; + USHORT DoubleClock:1; + USHORT Interlace:1; + USHORT CompositeSync:1; + USHORT V_ReplicationBy2:1; + USHORT H_ReplicationBy2:1; + USHORT VerticalCutOff:1; + USHORT VSyncPolarity:1; //0=Active High, 1=Active Low + USHORT HSyncPolarity:1; //0=Active High, 1=Active Low + USHORT HorizontalCutOff:1; +#else + USHORT HorizontalCutOff:1; + USHORT HSyncPolarity:1; //0=Active High, 1=Active Low + USHORT VSyncPolarity:1; //0=Active High, 1=Active Low + USHORT VerticalCutOff:1; + USHORT H_ReplicationBy2:1; + USHORT V_ReplicationBy2:1; + USHORT CompositeSync:1; + USHORT Interlace:1; + USHORT DoubleClock:1; + USHORT RGB888:1; + USHORT Reserved:6; +#endif +}ATOM_MODE_MISC_INFO; + +typedef union _ATOM_MODE_MISC_INFO_ACCESS +{ + ATOM_MODE_MISC_INFO sbfAccess; + USHORT usAccess; +}ATOM_MODE_MISC_INFO_ACCESS; + +#else + +typedef union _ATOM_MODE_MISC_INFO_ACCESS +{ + USHORT usAccess; +}ATOM_MODE_MISC_INFO_ACCESS; + +#endif + +// usModeMiscInfo- +#define ATOM_H_CUTOFF 0x01 +#define ATOM_HSYNC_POLARITY 0x02 //0=Active High, 1=Active Low +#define ATOM_VSYNC_POLARITY 0x04 //0=Active High, 1=Active Low +#define ATOM_V_CUTOFF 0x08 +#define ATOM_H_REPLICATIONBY2 0x10 +#define ATOM_V_REPLICATIONBY2 0x20 +#define ATOM_COMPOSITESYNC 0x40 +#define ATOM_INTERLACE 0x80 +#define ATOM_DOUBLE_CLOCK_MODE 0x100 +#define ATOM_RGB888_MODE 0x200 + +//usRefreshRate- +#define ATOM_REFRESH_43 43 +#define ATOM_REFRESH_47 47 +#define ATOM_REFRESH_56 56 +#define ATOM_REFRESH_60 60 +#define ATOM_REFRESH_65 65 +#define ATOM_REFRESH_70 70 +#define ATOM_REFRESH_72 72 +#define ATOM_REFRESH_75 75 +#define ATOM_REFRESH_85 85 + +// ATOM_MODE_TIMING data are exactly the same as VESA timing data. +// Translation from EDID to ATOM_MODE_TIMING, use the following formula. +// +// VESA_HTOTAL = VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK +// = EDID_HA + EDID_HBL +// VESA_HDISP = VESA_ACTIVE = EDID_HA +// VESA_HSYNC_START = VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH +// = EDID_HA + EDID_HSO +// VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW +// VESA_BORDER = EDID_BORDER + +/****************************************************************************/ +// Structure used in SetCRTC_UsingDTDTimingTable +/****************************************************************************/ +typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS +{ + USHORT usH_Size; + USHORT usH_Blanking_Time; + USHORT usV_Size; + USHORT usV_Blanking_Time; + USHORT usH_SyncOffset; + USHORT usH_SyncWidth; + USHORT usV_SyncOffset; + USHORT usV_SyncWidth; + ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; + UCHAR ucH_Border; // From DFP EDID + UCHAR ucV_Border; + UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 + UCHAR ucPadding[3]; +}SET_CRTC_USING_DTD_TIMING_PARAMETERS; + +/****************************************************************************/ +// Structure used in SetCRTC_TimingTable +/****************************************************************************/ +typedef struct _SET_CRTC_TIMING_PARAMETERS +{ + USHORT usH_Total; // horizontal total + USHORT usH_Disp; // horizontal display + USHORT usH_SyncStart; // horozontal Sync start + USHORT usH_SyncWidth; // horizontal Sync width + USHORT usV_Total; // vertical total + USHORT usV_Disp; // vertical display + USHORT usV_SyncStart; // vertical Sync start + USHORT usV_SyncWidth; // vertical Sync width + ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; + UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 + UCHAR ucOverscanRight; // right + UCHAR ucOverscanLeft; // left + UCHAR ucOverscanBottom; // bottom + UCHAR ucOverscanTop; // top + UCHAR ucReserved; +}SET_CRTC_TIMING_PARAMETERS; +#define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS + +/****************************************************************************/ +// Structure used in StandardVESA_TimingTable +// AnalogTV_InfoTable +// ComponentVideoInfoTable +/****************************************************************************/ +typedef struct _ATOM_MODE_TIMING +{ + USHORT usCRTC_H_Total; + USHORT usCRTC_H_Disp; + USHORT usCRTC_H_SyncStart; + USHORT usCRTC_H_SyncWidth; + USHORT usCRTC_V_Total; + USHORT usCRTC_V_Disp; + USHORT usCRTC_V_SyncStart; + USHORT usCRTC_V_SyncWidth; + USHORT usPixelClock; //in 10Khz unit + ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; + USHORT usCRTC_OverscanRight; + USHORT usCRTC_OverscanLeft; + USHORT usCRTC_OverscanBottom; + USHORT usCRTC_OverscanTop; + USHORT usReserve; + UCHAR ucInternalModeNumber; + UCHAR ucRefreshRate; +}ATOM_MODE_TIMING; + +typedef struct _ATOM_DTD_FORMAT +{ + USHORT usPixClk; + USHORT usHActive; + USHORT usHBlanking_Time; + USHORT usVActive; + USHORT usVBlanking_Time; + USHORT usHSyncOffset; + USHORT usHSyncWidth; + USHORT usVSyncOffset; + USHORT usVSyncWidth; + USHORT usImageHSize; + USHORT usImageVSize; + UCHAR ucHBorder; + UCHAR ucVBorder; + ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; + UCHAR ucInternalModeNumber; + UCHAR ucRefreshRate; +}ATOM_DTD_FORMAT; + +/****************************************************************************/ +// Structure used in LVDS_InfoTable +// * Need a document to describe this table +/****************************************************************************/ +#define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 +#define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 +#define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 +#define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 + +//ucTableFormatRevision=1 +//ucTableContentRevision=1 +typedef struct _ATOM_LVDS_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_DTD_FORMAT sLCDTiming; + USHORT usModePatchTableOffset; + USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec. + USHORT usOffDelayInMs; + UCHAR ucPowerSequenceDigOntoDEin10Ms; + UCHAR ucPowerSequenceDEtoBLOnin10Ms; + UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} + // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} + // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} + // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} + UCHAR ucPanelDefaultRefreshRate; + UCHAR ucPanelIdentification; + UCHAR ucSS_Id; +}ATOM_LVDS_INFO; + +//ucTableFormatRevision=1 +//ucTableContentRevision=2 +typedef struct _ATOM_LVDS_INFO_V12 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_DTD_FORMAT sLCDTiming; + USHORT usExtInfoTableOffset; + USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec. + USHORT usOffDelayInMs; + UCHAR ucPowerSequenceDigOntoDEin10Ms; + UCHAR ucPowerSequenceDEtoBLOnin10Ms; + UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} + // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} + // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} + // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} + UCHAR ucPanelDefaultRefreshRate; + UCHAR ucPanelIdentification; + UCHAR ucSS_Id; + USHORT usLCDVenderID; + USHORT usLCDProductID; + UCHAR ucLCDPanel_SpecialHandlingCap; + UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable + UCHAR ucReserved[2]; +}ATOM_LVDS_INFO_V12; + +//Definitions for ucLCDPanel_SpecialHandlingCap: + +//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. +//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL +#define LCDPANEL_CAP_READ_EDID 0x1 + +//If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together +//with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static +//refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12 +#define LCDPANEL_CAP_DRR_SUPPORTED 0x2 + +//Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP. +#define LCDPANEL_CAP_eDP 0x4 + + +//Color Bit Depth definition in EDID V1.4 @BYTE 14h +//Bit 6 5 4 + // 0 0 0 - Color bit depth is undefined + // 0 0 1 - 6 Bits per Primary Color + // 0 1 0 - 8 Bits per Primary Color + // 0 1 1 - 10 Bits per Primary Color + // 1 0 0 - 12 Bits per Primary Color + // 1 0 1 - 14 Bits per Primary Color + // 1 1 0 - 16 Bits per Primary Color + // 1 1 1 - Reserved + +#define PANEL_COLOR_BIT_DEPTH_MASK 0x70 + +// Bit7:{=0:Random Dithering disabled;1 Random Dithering enabled} +#define PANEL_RANDOM_DITHER 0x80 +#define PANEL_RANDOM_DITHER_MASK 0x80 + +#define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12 // no need to change this + +/****************************************************************************/ +// Structures used by LCD_InfoTable V1.3 Note: previous version was called ATOM_LVDS_INFO_V12 +// ASIC Families: NI +// ucTableFormatRevision=1 +// ucTableContentRevision=3 +/****************************************************************************/ +typedef struct _ATOM_LCD_INFO_V13 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_DTD_FORMAT sLCDTiming; + USHORT usExtInfoTableOffset; + USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec. + ULONG ulReserved0; + UCHAR ucLCD_Misc; // Reorganized in V13 + // Bit0: {=0:single, =1:dual}, + // Bit1: {=0:LDI format for RGB888, =1 FPDI format for RGB888} // was {=0:666RGB, =1:888RGB}, + // Bit3:2: {Grey level} + // Bit6:4 Color Bit Depth definition (see below definition in EDID V1.4 @BYTE 14h) + // Bit7 Reserved. was for ATOM_PANEL_MISC_API_ENABLED, still need it? + UCHAR ucPanelDefaultRefreshRate; + UCHAR ucPanelIdentification; + UCHAR ucSS_Id; + USHORT usLCDVenderID; + USHORT usLCDProductID; + UCHAR ucLCDPanel_SpecialHandlingCap; // Reorganized in V13 + // Bit0: Once DAL sees this CAP is set, it will read EDID from LCD on its own + // Bit1: See LCDPANEL_CAP_DRR_SUPPORTED + // Bit2: a quick reference whether an embadded panel (LCD1 ) is LVDS (0) or eDP (1) + // Bit7-3: Reserved + UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable + USHORT usBacklightPWM; // Backlight PWM in Hz. New in _V13 + + UCHAR ucPowerSequenceDIGONtoDE_in4Ms; + UCHAR ucPowerSequenceDEtoVARY_BL_in4Ms; + UCHAR ucPowerSequenceVARY_BLtoDE_in4Ms; + UCHAR ucPowerSequenceDEtoDIGON_in4Ms; + + UCHAR ucOffDelay_in4Ms; + UCHAR ucPowerSequenceVARY_BLtoBLON_in4Ms; + UCHAR ucPowerSequenceBLONtoVARY_BL_in4Ms; + UCHAR ucReserved1; + + UCHAR ucDPCD_eDP_CONFIGURATION_CAP; // dpcd 0dh + UCHAR ucDPCD_MAX_LINK_RATE; // dpcd 01h + UCHAR ucDPCD_MAX_LANE_COUNT; // dpcd 02h + UCHAR ucDPCD_MAX_DOWNSPREAD; // dpcd 03h + + USHORT usMaxPclkFreqInSingleLink; // Max PixelClock frequency in single link mode. + UCHAR uceDPToLVDSRxId; + UCHAR ucLcdReservd; + ULONG ulReserved[2]; +}ATOM_LCD_INFO_V13; + +#define ATOM_LCD_INFO_LAST ATOM_LCD_INFO_V13 + +//Definitions for ucLCD_Misc +#define ATOM_PANEL_MISC_V13_DUAL 0x00000001 +#define ATOM_PANEL_MISC_V13_FPDI 0x00000002 +#define ATOM_PANEL_MISC_V13_GREY_LEVEL 0x0000000C +#define ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT 2 +#define ATOM_PANEL_MISC_V13_COLOR_BIT_DEPTH_MASK 0x70 +#define ATOM_PANEL_MISC_V13_6BIT_PER_COLOR 0x10 +#define ATOM_PANEL_MISC_V13_8BIT_PER_COLOR 0x20 + +//Color Bit Depth definition in EDID V1.4 @BYTE 14h +//Bit 6 5 4 + // 0 0 0 - Color bit depth is undefined + // 0 0 1 - 6 Bits per Primary Color + // 0 1 0 - 8 Bits per Primary Color + // 0 1 1 - 10 Bits per Primary Color + // 1 0 0 - 12 Bits per Primary Color + // 1 0 1 - 14 Bits per Primary Color + // 1 1 0 - 16 Bits per Primary Color + // 1 1 1 - Reserved + +//Definitions for ucLCDPanel_SpecialHandlingCap: + +//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. +//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL +#define LCDPANEL_CAP_V13_READ_EDID 0x1 // = LCDPANEL_CAP_READ_EDID no change comparing to previous version + +//If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together +//with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static +//refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12 +#define LCDPANEL_CAP_V13_DRR_SUPPORTED 0x2 // = LCDPANEL_CAP_DRR_SUPPORTED no change comparing to previous version + +//Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP. +#define LCDPANEL_CAP_V13_eDP 0x4 // = LCDPANEL_CAP_eDP no change comparing to previous version + +//uceDPToLVDSRxId +#define eDP_TO_LVDS_RX_DISABLE 0x00 // no eDP->LVDS translator chip +#define eDP_TO_LVDS_COMMON_ID 0x01 // common eDP->LVDS translator chip without AMD SW init +#define eDP_TO_LVDS_RT_ID 0x02 // RT tanslator which require AMD SW init + +typedef struct _ATOM_PATCH_RECORD_MODE +{ + UCHAR ucRecordType; + USHORT usHDisp; + USHORT usVDisp; +}ATOM_PATCH_RECORD_MODE; + +typedef struct _ATOM_LCD_RTS_RECORD +{ + UCHAR ucRecordType; + UCHAR ucRTSValue; +}ATOM_LCD_RTS_RECORD; + +//!! If the record below exists, it should always be the first record for easy use in command table!!! +// The record below is only used when LVDS_Info is present. From ATOM_LVDS_INFO_V12, use ucLCDPanel_SpecialHandlingCap instead. +typedef struct _ATOM_LCD_MODE_CONTROL_CAP +{ + UCHAR ucRecordType; + USHORT usLCDCap; +}ATOM_LCD_MODE_CONTROL_CAP; + +#define LCD_MODE_CAP_BL_OFF 1 +#define LCD_MODE_CAP_CRTC_OFF 2 +#define LCD_MODE_CAP_PANEL_OFF 4 + +typedef struct _ATOM_FAKE_EDID_PATCH_RECORD +{ + UCHAR ucRecordType; + UCHAR ucFakeEDIDLength; + UCHAR ucFakeEDIDString[1]; // This actually has ucFakeEdidLength elements. +} ATOM_FAKE_EDID_PATCH_RECORD; + +typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD +{ + UCHAR ucRecordType; + USHORT usHSize; + USHORT usVSize; +}ATOM_PANEL_RESOLUTION_PATCH_RECORD; + +#define LCD_MODE_PATCH_RECORD_MODE_TYPE 1 +#define LCD_RTS_RECORD_TYPE 2 +#define LCD_CAP_RECORD_TYPE 3 +#define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4 +#define LCD_PANEL_RESOLUTION_RECORD_TYPE 5 +#define LCD_EDID_OFFSET_PATCH_RECORD_TYPE 6 +#define ATOM_RECORD_END_TYPE 0xFF + +/****************************Spread Spectrum Info Table Definitions **********************/ + +//ucTableFormatRevision=1 +//ucTableContentRevision=2 +typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT +{ + USHORT usSpreadSpectrumPercentage; + UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Bit2=1: PCIE REFCLK SS =0 iternal PPLL SS Others:TBD + UCHAR ucSS_Step; + UCHAR ucSS_Delay; + UCHAR ucSS_Id; + UCHAR ucRecommendedRef_Div; + UCHAR ucSS_Range; //it was reserved for V11 +}ATOM_SPREAD_SPECTRUM_ASSIGNMENT; + +#define ATOM_MAX_SS_ENTRY 16 +#define ATOM_DP_SS_ID1 0x0f1 // SS ID for internal DP stream at 2.7Ghz. if ATOM_DP_SS_ID2 does not exist in SS_InfoTable, it is used for internal DP stream at 1.62Ghz as well. +#define ATOM_DP_SS_ID2 0x0f2 // SS ID for internal DP stream at 1.62Ghz, if it exists in SS_InfoTable. +#define ATOM_LVLINK_2700MHz_SS_ID 0x0f3 // SS ID for LV link translator chip at 2.7Ghz +#define ATOM_LVLINK_1620MHz_SS_ID 0x0f4 // SS ID for LV link translator chip at 1.62Ghz + + +#define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000 +#define ATOM_SS_DOWN_SPREAD_MODE 0x00000000 +#define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001 +#define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001 +#define ATOM_INTERNAL_SS_MASK 0x00000000 +#define ATOM_EXTERNAL_SS_MASK 0x00000002 +#define EXEC_SS_STEP_SIZE_SHIFT 2 +#define EXEC_SS_DELAY_SHIFT 4 +#define ACTIVEDATA_TO_BLON_DELAY_SHIFT 4 + +typedef struct _ATOM_SPREAD_SPECTRUM_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY]; +}ATOM_SPREAD_SPECTRUM_INFO; + +/****************************************************************************/ +// Structure used in AnalogTV_InfoTable (Top level) +/****************************************************************************/ +//ucTVBootUpDefaultStd definition: + +//ATOM_TV_NTSC 1 +//ATOM_TV_NTSCJ 2 +//ATOM_TV_PAL 3 +//ATOM_TV_PALM 4 +//ATOM_TV_PALCN 5 +//ATOM_TV_PALN 6 +//ATOM_TV_PAL60 7 +//ATOM_TV_SECAM 8 + +//ucTVSupportedStd definition: +#define NTSC_SUPPORT 0x1 +#define NTSCJ_SUPPORT 0x2 + +#define PAL_SUPPORT 0x4 +#define PALM_SUPPORT 0x8 +#define PALCN_SUPPORT 0x10 +#define PALN_SUPPORT 0x20 +#define PAL60_SUPPORT 0x40 +#define SECAM_SUPPORT 0x80 + +#define MAX_SUPPORTED_TV_TIMING 2 + +typedef struct _ATOM_ANALOG_TV_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucTV_SupportedStandard; + UCHAR ucTV_BootUpDefaultStandard; + UCHAR ucExt_TV_ASIC_ID; + UCHAR ucExt_TV_ASIC_SlaveAddr; + /*ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING];*/ + ATOM_MODE_TIMING aModeTimings[MAX_SUPPORTED_TV_TIMING]; +}ATOM_ANALOG_TV_INFO; + +#define MAX_SUPPORTED_TV_TIMING_V1_2 3 + +typedef struct _ATOM_ANALOG_TV_INFO_V1_2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucTV_SupportedStandard; + UCHAR ucTV_BootUpDefaultStandard; + UCHAR ucExt_TV_ASIC_ID; + UCHAR ucExt_TV_ASIC_SlaveAddr; + ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING_V1_2]; +}ATOM_ANALOG_TV_INFO_V1_2; + +typedef struct _ATOM_DPCD_INFO +{ + UCHAR ucRevisionNumber; //10h : Revision 1.0; 11h : Revision 1.1 + UCHAR ucMaxLinkRate; //06h : 1.62Gbps per lane; 0Ah = 2.7Gbps per lane + UCHAR ucMaxLane; //Bits 4:0 = MAX_LANE_COUNT (1/2/4). Bit 7 = ENHANCED_FRAME_CAP + UCHAR ucMaxDownSpread; //Bit0 = 0: No Down spread; Bit0 = 1: 0.5% (Subject to change according to DP spec) +}ATOM_DPCD_INFO; + +#define ATOM_DPCD_MAX_LANE_MASK 0x1F + +/**************************************************************************/ +// VRAM usage and their defintions + +// One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. +// Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. +// All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned! +// To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR +// To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX + +#ifndef VESA_MEMORY_IN_64K_BLOCK +#define VESA_MEMORY_IN_64K_BLOCK 0x100 //256*64K=16Mb (Max. VESA memory is 16Mb!) +#endif + +#define ATOM_EDID_RAW_DATASIZE 256 //In Bytes +#define ATOM_HWICON_SURFACE_SIZE 4096 //In Bytes +#define ATOM_HWICON_INFOTABLE_SIZE 32 +#define MAX_DTD_MODE_IN_VRAM 6 +#define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) //28= (SIZEOF ATOM_DTD_FORMAT) +#define ATOM_STD_MODE_SUPPORT_TBL_SIZE 32*8 //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT) +//20 bytes for Encoder Type and DPCD in STD EDID area +#define DFP_ENCODER_TYPE_OFFSET (ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20) +#define ATOM_DP_DPCD_OFFSET (DFP_ENCODER_TYPE_OFFSET + 4 ) + +#define ATOM_HWICON1_SURFACE_ADDR 0 +#define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE) +#define ATOM_HWICON_INFOTABLE_ADDR (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE) +#define ATOM_CRT1_EDID_ADDR (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE) +#define ATOM_CRT1_DTD_MODE_TBL_ADDR (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_CRT1_STD_MODE_TBL_ADDR (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_LCD1_EDID_ADDR (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_LCD1_DTD_MODE_TBL_ADDR (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_LCD1_STD_MODE_TBL_ADDR (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_TV1_DTD_MODE_TBL_ADDR (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP1_EDID_ADDR (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP1_DTD_MODE_TBL_ADDR (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP1_STD_MODE_TBL_ADDR (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_CRT2_EDID_ADDR (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_CRT2_DTD_MODE_TBL_ADDR (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_CRT2_STD_MODE_TBL_ADDR (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_LCD2_EDID_ADDR (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_LCD2_DTD_MODE_TBL_ADDR (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_LCD2_STD_MODE_TBL_ADDR (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP6_EDID_ADDR (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP6_DTD_MODE_TBL_ADDR (ATOM_DFP6_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP6_STD_MODE_TBL_ADDR (ATOM_DFP6_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP2_EDID_ADDR (ATOM_DFP6_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP2_DTD_MODE_TBL_ADDR (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP2_STD_MODE_TBL_ADDR (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_CV_EDID_ADDR (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_CV_DTD_MODE_TBL_ADDR (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_CV_STD_MODE_TBL_ADDR (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP3_EDID_ADDR (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) +#define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) + +#define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR + 1024) +#define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START + 512 + +//The size below is in Kb! +#define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC) + +#define ATOM_VRAM_RESERVE_V2_SIZE 32 + +#define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L +#define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30 +#define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1 +#define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0 + +/***********************************************************************************/ +// Structure used in VRAM_UsageByFirmwareTable +// Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm +// at running time. +// note2: From RV770, the memory is more than 32bit addressable, so we will change +// ucTableFormatRevision=1,ucTableContentRevision=4, the structure remains +// exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware +// (in offset to start of memory address) is KB aligned instead of byte aligend. +/***********************************************************************************/ +// Note3: +/* If we change usReserved to "usFBUsedbyDrvInKB", then to VBIOS this usFBUsedbyDrvInKB is a predefined, unchanged constant across VGA or non VGA adapter, +for CAIL, The size of FB access area is known, only thing missing is the Offset of FB Access area, so we can have: + +If (ulStartAddrUsedByFirmware!=0) +FBAccessAreaOffset= ulStartAddrUsedByFirmware - usFBUsedbyDrvInKB; +Reserved area has been claimed by VBIOS including this FB access area; CAIL doesn't need to reserve any extra area for this purpose +else //Non VGA case + if (FB_Size<=2Gb) + FBAccessAreaOffset= FB_Size - usFBUsedbyDrvInKB; + else + FBAccessAreaOffset= Aper_Size - usFBUsedbyDrvInKB + +CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/ + +/***********************************************************************************/ +#define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1 + +typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO +{ + ULONG ulStartAddrUsedByFirmware; + USHORT usFirmwareUseInKb; + USHORT usReserved; +}ATOM_FIRMWARE_VRAM_RESERVE_INFO; + +typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_FIRMWARE_VRAM_RESERVE_INFO asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO]; +}ATOM_VRAM_USAGE_BY_FIRMWARE; + +// change version to 1.5, when allow driver to allocate the vram area for command table access. +typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5 +{ + ULONG ulStartAddrUsedByFirmware; + USHORT usFirmwareUseInKb; + USHORT usFBUsedByDrvInKb; +}ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5; + +typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5 asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO]; +}ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5; + +/****************************************************************************/ +// Structure used in GPIO_Pin_LUTTable +/****************************************************************************/ +typedef struct _ATOM_GPIO_PIN_ASSIGNMENT +{ + USHORT usGpioPin_AIndex; + UCHAR ucGpioPinBitShift; + UCHAR ucGPIO_ID; +}ATOM_GPIO_PIN_ASSIGNMENT; + +//ucGPIO_ID pre-define id for multiple usage +//from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC switching feature is enable +#define PP_AC_DC_SWITCH_GPIO_PINID 60 +//from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable +#define VDDC_VRHOT_GPIO_PINID 61 +//if ucGPIO_ID=VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled +#define VDDC_PCC_GPIO_PINID 62 + +typedef struct _ATOM_GPIO_PIN_LUT +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1]; +}ATOM_GPIO_PIN_LUT; + +/****************************************************************************/ +// Structure used in ComponentVideoInfoTable +/****************************************************************************/ +#define GPIO_PIN_ACTIVE_HIGH 0x1 + +#define MAX_SUPPORTED_CV_STANDARDS 5 + +// definitions for ATOM_D_INFO.ucSettings +#define ATOM_GPIO_SETTINGS_BITSHIFT_MASK 0x1F // [4:0] +#define ATOM_GPIO_SETTINGS_RESERVED_MASK 0x60 // [6:5] = must be zeroed out +#define ATOM_GPIO_SETTINGS_ACTIVE_MASK 0x80 // [7] + +typedef struct _ATOM_GPIO_INFO +{ + USHORT usAOffset; + UCHAR ucSettings; + UCHAR ucReserved; +}ATOM_GPIO_INFO; + +// definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector) +#define ATOM_CV_RESTRICT_FORMAT_SELECTION 0x2 + +// definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i +#define ATOM_GPIO_DEFAULT_MODE_EN 0x80 //[7]; +#define ATOM_GPIO_SETTING_PERMODE_MASK 0x7F //[6:0] + +// definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode +//Line 3 out put 5V. +#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A 0x01 //represent gpio 3 state for 16:9 +#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B 0x02 //represent gpio 4 state for 16:9 +#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT 0x0 + +//Line 3 out put 2.2V +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04 //represent gpio 3 state for 4:3 Letter box +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08 //represent gpio 4 state for 4:3 Letter box +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2 + +//Line 3 out put 0V +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A 0x10 //represent gpio 3 state for 4:3 +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B 0x20 //represent gpio 4 state for 4:3 +#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT 0x4 + +#define ATOM_CV_LINE3_ASPECTRATIO_MASK 0x3F // bit [5:0] + +#define ATOM_CV_LINE3_ASPECTRATIO_EXIST 0x80 //bit 7 + +//GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks. +#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A 3 //bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. +#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B 4 //bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. + + +typedef struct _ATOM_COMPONENT_VIDEO_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMask_PinRegisterIndex; + USHORT usEN_PinRegisterIndex; + USHORT usY_PinRegisterIndex; + USHORT usA_PinRegisterIndex; + UCHAR ucBitShift; + UCHAR ucPinActiveState; //ucPinActiveState: Bit0=1 active high, =0 active low + ATOM_DTD_FORMAT sReserved; // must be zeroed out + UCHAR ucMiscInfo; + UCHAR uc480i; + UCHAR uc480p; + UCHAR uc720p; + UCHAR uc1080i; + UCHAR ucLetterBoxMode; + UCHAR ucReserved[3]; + UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector + ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS]; + ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS]; +}ATOM_COMPONENT_VIDEO_INFO; + +//ucTableFormatRevision=2 +//ucTableContentRevision=1 +typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucMiscInfo; + UCHAR uc480i; + UCHAR uc480p; + UCHAR uc720p; + UCHAR uc1080i; + UCHAR ucReserved; + UCHAR ucLetterBoxMode; + UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector + ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS]; + ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS]; +}ATOM_COMPONENT_VIDEO_INFO_V21; + +#define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21 + +/****************************************************************************/ +// Structure used in object_InfoTable +/****************************************************************************/ +typedef struct _ATOM_OBJECT_HEADER +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDeviceSupport; + USHORT usConnectorObjectTableOffset; + USHORT usRouterObjectTableOffset; + USHORT usEncoderObjectTableOffset; + USHORT usProtectionObjectTableOffset; //only available when Protection block is independent. + USHORT usDisplayPathTableOffset; +}ATOM_OBJECT_HEADER; + +typedef struct _ATOM_OBJECT_HEADER_V3 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDeviceSupport; + USHORT usConnectorObjectTableOffset; + USHORT usRouterObjectTableOffset; + USHORT usEncoderObjectTableOffset; + USHORT usProtectionObjectTableOffset; //only available when Protection block is independent. + USHORT usDisplayPathTableOffset; + USHORT usMiscObjectTableOffset; +}ATOM_OBJECT_HEADER_V3; + +typedef struct _ATOM_DISPLAY_OBJECT_PATH +{ + USHORT usDeviceTag; //supported device + USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH + USHORT usConnObjectId; //Connector Object ID + USHORT usGPUObjectId; //GPU ID + USHORT usGraphicObjIds[1]; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. +}ATOM_DISPLAY_OBJECT_PATH; + +typedef struct _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH +{ + USHORT usDeviceTag; //supported device + USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH + USHORT usConnObjectId; //Connector Object ID + USHORT usGPUObjectId; //GPU ID + USHORT usGraphicObjIds[2]; //usGraphicObjIds[0]= GPU internal encoder, usGraphicObjIds[1]= external encoder +}ATOM_DISPLAY_EXTERNAL_OBJECT_PATH; + +typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE +{ + UCHAR ucNumOfDispPath; + UCHAR ucVersion; + UCHAR ucPadding[2]; + ATOM_DISPLAY_OBJECT_PATH asDispPath[1]; +}ATOM_DISPLAY_OBJECT_PATH_TABLE; + + +typedef struct _ATOM_OBJECT //each object has this structure +{ + USHORT usObjectID; + USHORT usSrcDstTableOffset; + USHORT usRecordOffset; //this pointing to a bunch of records defined below + USHORT usReserved; +}ATOM_OBJECT; + +typedef struct _ATOM_OBJECT_TABLE //Above 4 object table offset pointing to a bunch of objects all have this structure +{ + UCHAR ucNumberOfObjects; + UCHAR ucPadding[3]; + ATOM_OBJECT asObjects[1]; +}ATOM_OBJECT_TABLE; + +typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset pointing to this structure +{ + UCHAR ucNumberOfSrc; + USHORT usSrcObjectID[1]; + UCHAR ucNumberOfDst; + USHORT usDstObjectID[1]; +}ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT; + + +//Two definitions below are for OPM on MXM module designs + +#define EXT_HPDPIN_LUTINDEX_0 0 +#define EXT_HPDPIN_LUTINDEX_1 1 +#define EXT_HPDPIN_LUTINDEX_2 2 +#define EXT_HPDPIN_LUTINDEX_3 3 +#define EXT_HPDPIN_LUTINDEX_4 4 +#define EXT_HPDPIN_LUTINDEX_5 5 +#define EXT_HPDPIN_LUTINDEX_6 6 +#define EXT_HPDPIN_LUTINDEX_7 7 +#define MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES (EXT_HPDPIN_LUTINDEX_7+1) + +#define EXT_AUXDDC_LUTINDEX_0 0 +#define EXT_AUXDDC_LUTINDEX_1 1 +#define EXT_AUXDDC_LUTINDEX_2 2 +#define EXT_AUXDDC_LUTINDEX_3 3 +#define EXT_AUXDDC_LUTINDEX_4 4 +#define EXT_AUXDDC_LUTINDEX_5 5 +#define EXT_AUXDDC_LUTINDEX_6 6 +#define EXT_AUXDDC_LUTINDEX_7 7 +#define MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES (EXT_AUXDDC_LUTINDEX_7+1) + +//ucChannelMapping are defined as following +//for DP connector, eDP, DP to VGA/LVDS +//Bit[1:0]: Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[3:2]: Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[5:4]: Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[7:6]: Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING +{ +#if ATOM_BIG_ENDIAN + UCHAR ucDP_Lane3_Source:2; + UCHAR ucDP_Lane2_Source:2; + UCHAR ucDP_Lane1_Source:2; + UCHAR ucDP_Lane0_Source:2; +#else + UCHAR ucDP_Lane0_Source:2; + UCHAR ucDP_Lane1_Source:2; + UCHAR ucDP_Lane2_Source:2; + UCHAR ucDP_Lane3_Source:2; +#endif +}ATOM_DP_CONN_CHANNEL_MAPPING; + +//for DVI/HDMI, in dual link case, both links have to have same mapping. +//Bit[1:0]: Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[3:2]: Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[5:4]: Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[7:6]: Define which pin connect to DVI connector clock lane, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +typedef struct _ATOM_DVI_CONN_CHANNEL_MAPPING +{ +#if ATOM_BIG_ENDIAN + UCHAR ucDVI_CLK_Source:2; + UCHAR ucDVI_DATA0_Source:2; + UCHAR ucDVI_DATA1_Source:2; + UCHAR ucDVI_DATA2_Source:2; +#else + UCHAR ucDVI_DATA2_Source:2; + UCHAR ucDVI_DATA1_Source:2; + UCHAR ucDVI_DATA0_Source:2; + UCHAR ucDVI_CLK_Source:2; +#endif +}ATOM_DVI_CONN_CHANNEL_MAPPING; + +typedef struct _EXT_DISPLAY_PATH +{ + USHORT usDeviceTag; //A bit vector to show what devices are supported + USHORT usDeviceACPIEnum; //16bit device ACPI id. + USHORT usDeviceConnector; //A physical connector for displays to plug in, using object connector definitions + UCHAR ucExtAUXDDCLutIndex; //An index into external AUX/DDC channel LUT + UCHAR ucExtHPDPINLutIndex; //An index into external HPD pin LUT + USHORT usExtEncoderObjId; //external encoder object id + union{ + UCHAR ucChannelMapping; // if ucChannelMapping=0, using default one to one mapping + ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping; + ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping; + }; + UCHAR ucChPNInvert; // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted + USHORT usCaps; + USHORT usReserved; +}EXT_DISPLAY_PATH; + +#define NUMBER_OF_UCHAR_FOR_GUID 16 +#define MAX_NUMBER_OF_EXT_DISPLAY_PATH 7 + +//usCaps +#define EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE 0x01 +#define EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN 0x02 + +typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucGuid [NUMBER_OF_UCHAR_FOR_GUID]; // a GUID is a 16 byte long string + EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries. + UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0. + UCHAR uc3DStereoPinId; // use for eDP panel + UCHAR ucRemoteDisplayConfig; + UCHAR uceDPToLVDSRxId; + UCHAR ucFixDPVoltageSwing; // usCaps[1]=1, this indicate DP_LANE_SET value + UCHAR Reserved[3]; // for potential expansion +}ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO; + +//Related definitions, all records are different but they have a commond header +typedef struct _ATOM_COMMON_RECORD_HEADER +{ + UCHAR ucRecordType; //An emun to indicate the record type + UCHAR ucRecordSize; //The size of the whole record in byte +}ATOM_COMMON_RECORD_HEADER; + + +#define ATOM_I2C_RECORD_TYPE 1 +#define ATOM_HPD_INT_RECORD_TYPE 2 +#define ATOM_OUTPUT_PROTECTION_RECORD_TYPE 3 +#define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE 4 +#define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE 5 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE +#define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE 6 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE +#define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE 7 +#define ATOM_JTAG_RECORD_TYPE 8 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE +#define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE 9 +#define ATOM_ENCODER_DVO_CF_RECORD_TYPE 10 +#define ATOM_CONNECTOR_CF_RECORD_TYPE 11 +#define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE 12 +#define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE 13 +#define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE 14 +#define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15 +#define ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE 16 //This is for the case when connectors are not known to object table +#define ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE 17 //This is for the case when connectors are not known to object table +#define ATOM_OBJECT_LINK_RECORD_TYPE 18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record +#define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE 19 +#define ATOM_ENCODER_CAP_RECORD_TYPE 20 +#define ATOM_BRACKET_LAYOUT_RECORD_TYPE 21 + +//Must be updated when new record type is added,equal to that record definition! +#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_BRACKET_LAYOUT_RECORD_TYPE + +typedef struct _ATOM_I2C_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + ATOM_I2C_ID_CONFIG sucI2cId; + UCHAR ucI2CAddr; //The slave address, it's 0 when the record is attached to connector for DDC +}ATOM_I2C_RECORD; + +typedef struct _ATOM_HPD_INT_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucHPDIntGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info + UCHAR ucPlugged_PinState; +}ATOM_HPD_INT_RECORD; + + +typedef struct _ATOM_OUTPUT_PROTECTION_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucProtectionFlag; + UCHAR ucReserved; +}ATOM_OUTPUT_PROTECTION_RECORD; + +typedef struct _ATOM_CONNECTOR_DEVICE_TAG +{ + ULONG ulACPIDeviceEnum; //Reserved for now + USHORT usDeviceID; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT" + USHORT usPadding; +}ATOM_CONNECTOR_DEVICE_TAG; + +typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucNumberOfDevice; + UCHAR ucReserved; + ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1]; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation +}ATOM_CONNECTOR_DEVICE_TAG_RECORD; + + +typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucConfigGPIOID; + UCHAR ucConfigGPIOState; //Set to 1 when it's active high to enable external flow in + UCHAR ucFlowinGPIPID; + UCHAR ucExtInGPIPID; +}ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD; + +typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucCTL1GPIO_ID; + UCHAR ucCTL1GPIOState; //Set to 1 when it's active high + UCHAR ucCTL2GPIO_ID; + UCHAR ucCTL2GPIOState; //Set to 1 when it's active high + UCHAR ucCTL3GPIO_ID; + UCHAR ucCTL3GPIOState; //Set to 1 when it's active high + UCHAR ucCTLFPGA_IN_ID; + UCHAR ucPadding[3]; +}ATOM_ENCODER_FPGA_CONTROL_RECORD; + +typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info + UCHAR ucTVActiveState; //Indicating when the pin==0 or 1 when TV is connected +}ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD; + +typedef struct _ATOM_JTAG_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucTMSGPIO_ID; + UCHAR ucTMSGPIOState; //Set to 1 when it's active high + UCHAR ucTCKGPIO_ID; + UCHAR ucTCKGPIOState; //Set to 1 when it's active high + UCHAR ucTDOGPIO_ID; + UCHAR ucTDOGPIOState; //Set to 1 when it's active high + UCHAR ucTDIGPIO_ID; + UCHAR ucTDIGPIOState; //Set to 1 when it's active high + UCHAR ucPadding[2]; +}ATOM_JTAG_RECORD; + + +//The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually +typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR +{ + UCHAR ucGPIOID; // GPIO_ID, find the corresponding ID in GPIO_LUT table + UCHAR ucGPIO_PinState; // Pin state showing how to set-up the pin +}ATOM_GPIO_PIN_CONTROL_PAIR; + +typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucFlags; // Future expnadibility + UCHAR ucNumberOfPins; // Number of GPIO pins used to control the object + ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1]; // the real gpio pin pair determined by number of pins ucNumberOfPins +}ATOM_OBJECT_GPIO_CNTL_RECORD; + +//Definitions for GPIO pin state +#define GPIO_PIN_TYPE_INPUT 0x00 +#define GPIO_PIN_TYPE_OUTPUT 0x10 +#define GPIO_PIN_TYPE_HW_CONTROL 0x20 + +//For GPIO_PIN_TYPE_OUTPUT the following is defined +#define GPIO_PIN_OUTPUT_STATE_MASK 0x01 +#define GPIO_PIN_OUTPUT_STATE_SHIFT 0 +#define GPIO_PIN_STATE_ACTIVE_LOW 0x0 +#define GPIO_PIN_STATE_ACTIVE_HIGH 0x1 + +// Indexes to GPIO array in GLSync record +// GLSync record is for Frame Lock/Gen Lock feature. +#define ATOM_GPIO_INDEX_GLSYNC_REFCLK 0 +#define ATOM_GPIO_INDEX_GLSYNC_HSYNC 1 +#define ATOM_GPIO_INDEX_GLSYNC_VSYNC 2 +#define ATOM_GPIO_INDEX_GLSYNC_SWAP_REQ 3 +#define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT 4 +#define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5 +#define ATOM_GPIO_INDEX_GLSYNC_V_RESET 6 +#define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7 +#define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL 8 +#define ATOM_GPIO_INDEX_GLSYNC_MAX 9 + +typedef struct _ATOM_ENCODER_DVO_CF_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + ULONG ulStrengthControl; // DVOA strength control for CF + UCHAR ucPadding[2]; +}ATOM_ENCODER_DVO_CF_RECORD; + +// Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap +#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by HW encoder +#define ATOM_ENCODER_CAP_RECORD_HBR2_EN 0x02 // DP1.2 HBR2 setting is qualified and HBR2 can be enabled + +typedef struct _ATOM_ENCODER_CAP_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + union { + USHORT usEncoderCap; + struct { +#if ATOM_BIG_ENDIAN + USHORT usReserved:14; // Bit1-15 may be defined for other capability in future + USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable + USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. +#else + USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. + USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable + USHORT usReserved:14; // Bit1-15 may be defined for other capability in future +#endif + }; + }; +}ATOM_ENCODER_CAP_RECORD; + +// value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle +#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1 +#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2 + +typedef struct _ATOM_CONNECTOR_CF_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + USHORT usMaxPixClk; + UCHAR ucFlowCntlGpioId; + UCHAR ucSwapCntlGpioId; + UCHAR ucConnectedDvoBundle; + UCHAR ucPadding; +}ATOM_CONNECTOR_CF_RECORD; + +typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + ATOM_DTD_FORMAT asTiming; +}ATOM_CONNECTOR_HARDCODE_DTD_RECORD; + +typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; //ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE + UCHAR ucSubConnectorType; //CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A + UCHAR ucReserved; +}ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD; + + +typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucMuxType; //decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state + UCHAR ucMuxControlPin; + UCHAR ucMuxState[2]; //for alligment purpose +}ATOM_ROUTER_DDC_PATH_SELECT_RECORD; + +typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucMuxType; + UCHAR ucMuxControlPin; + UCHAR ucMuxState[2]; //for alligment purpose +}ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD; + +// define ucMuxType +#define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f +#define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01 + +typedef struct _ATOM_CONNECTOR_HPDPIN_LUT_RECORD //record for ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucHPDPINMap[MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES]; //An fixed size array which maps external pins to internal GPIO_PIN_INFO table +}ATOM_CONNECTOR_HPDPIN_LUT_RECORD; + +typedef struct _ATOM_CONNECTOR_AUXDDC_LUT_RECORD //record for ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE +{ + ATOM_COMMON_RECORD_HEADER sheader; + ATOM_I2C_ID_CONFIG ucAUXDDCMap[MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES]; //An fixed size array which maps external pins to internal DDC ID +}ATOM_CONNECTOR_AUXDDC_LUT_RECORD; + +typedef struct _ATOM_OBJECT_LINK_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + USHORT usObjectID; //could be connector, encorder or other object in object.h +}ATOM_OBJECT_LINK_RECORD; + +typedef struct _ATOM_CONNECTOR_REMOTE_CAP_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + USHORT usReserved; +}ATOM_CONNECTOR_REMOTE_CAP_RECORD; + +typedef struct _ATOM_CONNECTOR_LAYOUT_INFO +{ + USHORT usConnectorObjectId; + UCHAR ucConnectorType; + UCHAR ucPosition; +}ATOM_CONNECTOR_LAYOUT_INFO; + +// define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size +#define CONNECTOR_TYPE_DVI_D 1 +#define CONNECTOR_TYPE_DVI_I 2 +#define CONNECTOR_TYPE_VGA 3 +#define CONNECTOR_TYPE_HDMI 4 +#define CONNECTOR_TYPE_DISPLAY_PORT 5 +#define CONNECTOR_TYPE_MINI_DISPLAY_PORT 6 + +typedef struct _ATOM_BRACKET_LAYOUT_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + UCHAR ucLength; + UCHAR ucWidth; + UCHAR ucConnNum; + UCHAR ucReserved; + ATOM_CONNECTOR_LAYOUT_INFO asConnInfo[1]; +}ATOM_BRACKET_LAYOUT_RECORD; + +/****************************************************************************/ +// ASIC voltage data table +/****************************************************************************/ +typedef struct _ATOM_VOLTAGE_INFO_HEADER +{ + USHORT usVDDCBaseLevel; //In number of 50mv unit + USHORT usReserved; //For possible extension table offset + UCHAR ucNumOfVoltageEntries; + UCHAR ucBytesPerVoltageEntry; + UCHAR ucVoltageStep; //Indicating in how many mv increament is one step, 0.5mv unit + UCHAR ucDefaultVoltageEntry; + UCHAR ucVoltageControlI2cLine; + UCHAR ucVoltageControlAddress; + UCHAR ucVoltageControlOffset; +}ATOM_VOLTAGE_INFO_HEADER; + +typedef struct _ATOM_VOLTAGE_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VOLTAGE_INFO_HEADER viHeader; + UCHAR ucVoltageEntries[64]; //64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry +}ATOM_VOLTAGE_INFO; + + +typedef struct _ATOM_VOLTAGE_FORMULA +{ + USHORT usVoltageBaseLevel; // In number of 1mv unit + USHORT usVoltageStep; // Indicating in how many mv increament is one step, 1mv unit + UCHAR ucNumOfVoltageEntries; // Number of Voltage Entry, which indicate max Voltage + UCHAR ucFlag; // bit0=0 :step is 1mv =1 0.5mv + UCHAR ucBaseVID; // if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep + UCHAR ucReserved; + UCHAR ucVIDAdjustEntries[32]; // 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries +}ATOM_VOLTAGE_FORMULA; + +typedef struct _VOLTAGE_LUT_ENTRY +{ + USHORT usVoltageCode; // The Voltage ID, either GPIO or I2C code + USHORT usVoltageValue; // The corresponding Voltage Value, in mV +}VOLTAGE_LUT_ENTRY; + +typedef struct _ATOM_VOLTAGE_FORMULA_V2 +{ + UCHAR ucNumOfVoltageEntries; // Number of Voltage Entry, which indicate max Voltage + UCHAR ucReserved[3]; + VOLTAGE_LUT_ENTRY asVIDAdjustEntries[32];// 32 is for allocation, the actual number of entries is in ucNumOfVoltageEntries +}ATOM_VOLTAGE_FORMULA_V2; + +typedef struct _ATOM_VOLTAGE_CONTROL +{ + UCHAR ucVoltageControlId; //Indicate it is controlled by I2C or GPIO or HW state machine + UCHAR ucVoltageControlI2cLine; + UCHAR ucVoltageControlAddress; + UCHAR ucVoltageControlOffset; + USHORT usGpioPin_AIndex; //GPIO_PAD register index + UCHAR ucGpioPinBitShift[9]; //at most 8 pin support 255 VIDs, termintate with 0xff + UCHAR ucReserved; +}ATOM_VOLTAGE_CONTROL; + +// Define ucVoltageControlId +#define VOLTAGE_CONTROLLED_BY_HW 0x00 +#define VOLTAGE_CONTROLLED_BY_I2C_MASK 0x7F +#define VOLTAGE_CONTROLLED_BY_GPIO 0x80 +#define VOLTAGE_CONTROL_ID_LM64 0x01 //I2C control, used for R5xx Core Voltage +#define VOLTAGE_CONTROL_ID_DAC 0x02 //I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI +#define VOLTAGE_CONTROL_ID_VT116xM 0x03 //I2C control, used for R6xx Core Voltage +#define VOLTAGE_CONTROL_ID_DS4402 0x04 +#define VOLTAGE_CONTROL_ID_UP6266 0x05 +#define VOLTAGE_CONTROL_ID_SCORPIO 0x06 +#define VOLTAGE_CONTROL_ID_VT1556M 0x07 +#define VOLTAGE_CONTROL_ID_CHL822x 0x08 +#define VOLTAGE_CONTROL_ID_VT1586M 0x09 +#define VOLTAGE_CONTROL_ID_UP1637 0x0A +#define VOLTAGE_CONTROL_ID_CHL8214 0x0B +#define VOLTAGE_CONTROL_ID_UP1801 0x0C +#define VOLTAGE_CONTROL_ID_ST6788A 0x0D +#define VOLTAGE_CONTROL_ID_CHLIR3564SVI2 0x0E +#define VOLTAGE_CONTROL_ID_AD527x 0x0F +#define VOLTAGE_CONTROL_ID_NCP81022 0x10 +#define VOLTAGE_CONTROL_ID_LTC2635 0x11 + +typedef struct _ATOM_VOLTAGE_OBJECT +{ + UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI + UCHAR ucSize; //Size of Object + ATOM_VOLTAGE_CONTROL asControl; //describ how to control + ATOM_VOLTAGE_FORMULA asFormula; //Indicate How to convert real Voltage to VID +}ATOM_VOLTAGE_OBJECT; + +typedef struct _ATOM_VOLTAGE_OBJECT_V2 +{ + UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI + UCHAR ucSize; //Size of Object + ATOM_VOLTAGE_CONTROL asControl; //describ how to control + ATOM_VOLTAGE_FORMULA_V2 asFormula; //Indicate How to convert real Voltage to VID +}ATOM_VOLTAGE_OBJECT_V2; + +typedef struct _ATOM_VOLTAGE_OBJECT_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VOLTAGE_OBJECT asVoltageObj[3]; //Info for Voltage control +}ATOM_VOLTAGE_OBJECT_INFO; + +typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VOLTAGE_OBJECT_V2 asVoltageObj[3]; //Info for Voltage control +}ATOM_VOLTAGE_OBJECT_INFO_V2; + +typedef struct _ATOM_LEAKID_VOLTAGE +{ + UCHAR ucLeakageId; + UCHAR ucReserved; + USHORT usVoltage; +}ATOM_LEAKID_VOLTAGE; + +typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{ + UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI + UCHAR ucVoltageMode; //Indicate voltage control mode: Init/Set/Leakage/Set phase + USHORT usSize; //Size of Object +}ATOM_VOLTAGE_OBJECT_HEADER_V3; + +// ATOM_VOLTAGE_OBJECT_HEADER_V3.ucVoltageMode +#define VOLTAGE_OBJ_GPIO_LUT 0 //VOLTAGE and GPIO Lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_VR_I2C_INIT_SEQ 3 //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_PHASE_LUT 4 //Set Vregulator Phase lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_SVID2 7 //Indicate voltage control by SVID2 ->ATOM_SVID2_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_EVV 8 +#define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 +#define VOLTAGE_OBJ_HIGH1_STATE_LEAKAGE_LUT 0x12 //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 + +typedef struct _VOLTAGE_LUT_ENTRY_V2 +{ + ULONG ulVoltageId; // The Voltage ID which is used to program GPIO register + USHORT usVoltageValue; // The corresponding Voltage Value, in mV +}VOLTAGE_LUT_ENTRY_V2; + +typedef struct _LEAKAGE_VOLTAGE_LUT_ENTRY_V2 +{ + USHORT usVoltageLevel; // The Voltage ID which is used to program GPIO register + USHORT usVoltageId; + USHORT usLeakageId; // The corresponding Voltage Value, in mV +}LEAKAGE_VOLTAGE_LUT_ENTRY_V2; + +typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ + UCHAR ucVoltageRegulatorId; //Indicate Voltage Regulator Id + UCHAR ucVoltageControlI2cLine; + UCHAR ucVoltageControlAddress; + UCHAR ucVoltageControlOffset; + ULONG ulReserved; + VOLTAGE_LUT_ENTRY asVolI2cLut[1]; // end with 0xff +}ATOM_I2C_VOLTAGE_OBJECT_V3; + +// ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag +#define VOLTAGE_DATA_ONE_BYTE 0 +#define VOLTAGE_DATA_TWO_BYTE 1 + +typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT + UCHAR ucVoltageGpioCntlId; // default is 0 which indicate control through CG VID mode + UCHAR ucGpioEntryNum; // indiate the entry numbers of Votlage/Gpio value Look up table + UCHAR ucPhaseDelay; // phase delay in unit of micro second + UCHAR ucReserved; + ULONG ulGpioMaskVal; // GPIO Mask value + VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1]; +}ATOM_GPIO_VOLTAGE_OBJECT_V3; + +typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = 0x10/0x11/0x12 + UCHAR ucLeakageCntlId; // default is 0 + UCHAR ucLeakageEntryNum; // indicate the entry number of LeakageId/Voltage Lut table + UCHAR ucReserved[2]; + ULONG ulMaxVoltageLevel; + LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1]; +}ATOM_LEAKAGE_VOLTAGE_OBJECT_V3; + + +typedef struct _ATOM_SVID2_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_SVID2 +// 14:7 – PSI0_VID +// 6 – PSI0_EN +// 5 – PSI1 +// 4:2 – load line slope trim. +// 1:0 – offset trim, + USHORT usLoadLine_PSI; +// GPU GPIO pin Id to SVID2 regulator VRHot pin. possible value 0~31. 0 means GPIO0, 31 means GPIO31 + UCHAR ucSVDGpioId; //0~31 indicate GPIO0~31 + UCHAR ucSVCGpioId; //0~31 indicate GPIO0~31 + ULONG ulReserved; +}ATOM_SVID2_VOLTAGE_OBJECT_V3; + +typedef union _ATOM_VOLTAGE_OBJECT_V3{ + ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj; + ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj; + ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj; + ATOM_SVID2_VOLTAGE_OBJECT_V3 asSVID2Obj; +}ATOM_VOLTAGE_OBJECT_V3; + +typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V3_1 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VOLTAGE_OBJECT_V3 asVoltageObj[3]; //Info for Voltage control +}ATOM_VOLTAGE_OBJECT_INFO_V3_1; + +typedef struct _ATOM_ASIC_PROFILE_VOLTAGE +{ + UCHAR ucProfileId; + UCHAR ucReserved; + USHORT usSize; + USHORT usEfuseSpareStartAddr; + USHORT usFuseIndex[8]; //from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id, + ATOM_LEAKID_VOLTAGE asLeakVol[2]; //Leakid and relatd voltage +}ATOM_ASIC_PROFILE_VOLTAGE; + +//ucProfileId +#define ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE 1 +#define ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE 1 +#define ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE 2 + +typedef struct _ATOM_ASIC_PROFILING_INFO +{ + ATOM_COMMON_TABLE_HEADER asHeader; + ATOM_ASIC_PROFILE_VOLTAGE asVoltage; +}ATOM_ASIC_PROFILING_INFO; + +typedef struct _ATOM_ASIC_PROFILING_INFO_V2_1 +{ + ATOM_COMMON_TABLE_HEADER asHeader; + UCHAR ucLeakageBinNum; // indicate the entry number of LeakageId/Voltage Lut table + USHORT usLeakageBinArrayOffset; // offset of USHORT Leakage Bin list array ( from lower LeakageId to higher) + + UCHAR ucElbVDDC_Num; + USHORT usElbVDDC_IdArrayOffset; // offset of USHORT virtual VDDC voltage id ( 0xff01~0xff08 ) + USHORT usElbVDDC_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array + + UCHAR ucElbVDDCI_Num; + USHORT usElbVDDCI_IdArrayOffset; // offset of USHORT virtual VDDCI voltage id ( 0xff01~0xff08 ) + USHORT usElbVDDCI_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array +}ATOM_ASIC_PROFILING_INFO_V2_1; + +typedef struct _ATOM_ASIC_PROFILING_INFO_V3_1 +{ + ATOM_COMMON_TABLE_HEADER asHeader; + ULONG ulEvvDerateTdp; + ULONG ulEvvDerateTdc; + ULONG ulBoardCoreTemp; + ULONG ulMaxVddc; + ULONG ulMinVddc; + ULONG ulLoadLineSlop; + ULONG ulLeakageTemp; + ULONG ulLeakageVoltage; + ULONG ulCACmEncodeRange; + ULONG ulCACmEncodeAverage; + ULONG ulCACbEncodeRange; + ULONG ulCACbEncodeAverage; + ULONG ulKt_bEncodeRange; + ULONG ulKt_bEncodeAverage; + ULONG ulKv_mEncodeRange; + ULONG ulKv_mEncodeAverage; + ULONG ulKv_bEncodeRange; + ULONG ulKv_bEncodeAverage; + ULONG ulLkgEncodeLn_MaxDivMin; + ULONG ulLkgEncodeMin; + ULONG ulEfuseLogisticAlpha; + USHORT usPowerDpm0; + USHORT usCurrentDpm0; + USHORT usPowerDpm1; + USHORT usCurrentDpm1; + USHORT usPowerDpm2; + USHORT usCurrentDpm2; + USHORT usPowerDpm3; + USHORT usCurrentDpm3; + USHORT usPowerDpm4; + USHORT usCurrentDpm4; + USHORT usPowerDpm5; + USHORT usCurrentDpm5; + USHORT usPowerDpm6; + USHORT usCurrentDpm6; + USHORT usPowerDpm7; + USHORT usCurrentDpm7; +}ATOM_ASIC_PROFILING_INFO_V3_1; + + +typedef struct _ATOM_POWER_SOURCE_OBJECT +{ + UCHAR ucPwrSrcId; // Power source + UCHAR ucPwrSensorType; // GPIO, I2C or none + UCHAR ucPwrSensId; // if GPIO detect, it is GPIO id, if I2C detect, it is I2C id + UCHAR ucPwrSensSlaveAddr; // Slave address if I2C detect + UCHAR ucPwrSensRegIndex; // I2C register Index if I2C detect + UCHAR ucPwrSensRegBitMask; // detect which bit is used if I2C detect + UCHAR ucPwrSensActiveState; // high active or low active + UCHAR ucReserve[3]; // reserve + USHORT usSensPwr; // in unit of watt +}ATOM_POWER_SOURCE_OBJECT; + +typedef struct _ATOM_POWER_SOURCE_INFO +{ + ATOM_COMMON_TABLE_HEADER asHeader; + UCHAR asPwrbehave[16]; + ATOM_POWER_SOURCE_OBJECT asPwrObj[1]; +}ATOM_POWER_SOURCE_INFO; + + +//Define ucPwrSrcId +#define POWERSOURCE_PCIE_ID1 0x00 +#define POWERSOURCE_6PIN_CONNECTOR_ID1 0x01 +#define POWERSOURCE_8PIN_CONNECTOR_ID1 0x02 +#define POWERSOURCE_6PIN_CONNECTOR_ID2 0x04 +#define POWERSOURCE_8PIN_CONNECTOR_ID2 0x08 + +//define ucPwrSensorId +#define POWER_SENSOR_ALWAYS 0x00 +#define POWER_SENSOR_GPIO 0x01 +#define POWER_SENSOR_I2C 0x02 + +typedef struct _ATOM_CLK_VOLT_CAPABILITY +{ + ULONG ulVoltageIndex; // The Voltage Index indicated by FUSE, same voltage index shared with SCLK DPM fuse table + ULONG ulMaximumSupportedCLK; // Maximum clock supported with specified voltage index, unit in 10kHz +}ATOM_CLK_VOLT_CAPABILITY; + +typedef struct _ATOM_AVAILABLE_SCLK_LIST +{ + ULONG ulSupportedSCLK; // Maximum clock supported with specified voltage index, unit in 10kHz + USHORT usVoltageIndex; // The Voltage Index indicated by FUSE for specified SCLK + USHORT usVoltageID; // The Voltage ID indicated by FUSE for specified SCLK +}ATOM_AVAILABLE_SCLK_LIST; + +// ATOM_INTEGRATED_SYSTEM_INFO_V6 ulSystemConfig cap definition +#define ATOM_IGP_INFO_V6_SYSTEM_CONFIG__PCIE_POWER_GATING_ENABLE 1 // refer to ulSystemConfig bit[0] + +// this IntegrateSystemInfoTable is used for Liano/Ontario APU +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; + ULONG ulDentistVCOFreq; + ULONG ulBootUpUMAClock; + ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; + ULONG ulBootUpReqDisplayVector; + ULONG ulOtherDisplayMisc; + ULONG ulGPUCapInfo; + ULONG ulSB_MMIO_Base_Addr; + USHORT usRequestedPWMFreqInHz; + UCHAR ucHtcTmpLmt; + UCHAR ucHtcHystLmt; + ULONG ulMinEngineClock; + ULONG ulSystemConfig; + ULONG ulCPUCapInfo; + USHORT usNBP0Voltage; + USHORT usNBP1Voltage; + USHORT usBootUpNBVoltage; + USHORT usExtDispConnInfoOffset; + USHORT usPanelRefreshRateRange; + UCHAR ucMemoryType; + UCHAR ucUMAChannelNumber; + ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10]; + ULONG ulCSR_M3_ARB_CNTL_UVD[10]; + ULONG ulCSR_M3_ARB_CNTL_FS3D[10]; + ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; + ULONG ulGMCRestoreResetTime; + ULONG ulMinimumNClk; + ULONG ulIdleNClk; + ULONG ulDDR_DLL_PowerUpTime; + ULONG ulDDR_PLL_PowerUpTime; + USHORT usPCIEClkSSPercentage; + USHORT usPCIEClkSSType; + USHORT usLvdsSSPercentage; + USHORT usLvdsSSpreadRateIn10Hz; + USHORT usHDMISSPercentage; + USHORT usHDMISSpreadRateIn10Hz; + USHORT usDVISSPercentage; + USHORT usDVISSpreadRateIn10Hz; + ULONG SclkDpmBoostMargin; + ULONG SclkDpmThrottleMargin; + USHORT SclkDpmTdpLimitPG; + USHORT SclkDpmTdpLimitBoost; + ULONG ulBoostEngineCLock; + UCHAR ulBoostVid_2bit; + UCHAR EnableBoost; + USHORT GnbTdpLimit; + USHORT usMaxLVDSPclkFreqInSingleLink; + UCHAR ucLvdsMisc; + UCHAR ucLVDSReserved; + ULONG ulReserved3[15]; + ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; +}ATOM_INTEGRATED_SYSTEM_INFO_V6; + +// ulGPUCapInfo +#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 +#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION 0x08 + +//ucLVDSMisc: +#define SYS_INFO_LVDSMISC__888_FPDI_MODE 0x01 +#define SYS_INFO_LVDSMISC__DL_CH_SWAP 0x02 +#define SYS_INFO_LVDSMISC__888_BPC 0x04 +#define SYS_INFO_LVDSMISC__OVERRIDE_EN 0x08 +#define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW 0x10 +// new since Trinity +#define SYS_INFO_LVDSMISC__TRAVIS_LVDS_VOL_OVERRIDE_EN 0x20 + +// not used any more +#define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW 0x04 +#define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW 0x08 + +/********************************************************************************************************************** + ATOM_INTEGRATED_SYSTEM_INFO_V6 Description +ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock +ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. +ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. +sDISPCLK_Voltage: Report Display clock voltage requirement. + +ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Liano/Ontaio projects: + ATOM_DEVICE_CRT1_SUPPORT 0x0001 + ATOM_DEVICE_CRT2_SUPPORT 0x0010 + ATOM_DEVICE_DFP1_SUPPORT 0x0008 + ATOM_DEVICE_DFP6_SUPPORT 0x0040 + ATOM_DEVICE_DFP2_SUPPORT 0x0080 + ATOM_DEVICE_DFP3_SUPPORT 0x0200 + ATOM_DEVICE_DFP4_SUPPORT 0x0400 + ATOM_DEVICE_DFP5_SUPPORT 0x0800 + ATOM_DEVICE_LCD1_SUPPORT 0x0002 +ulOtherDisplayMisc: Other display related flags, not defined yet. +ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode. + =1: TMDS/HDMI Coherent Mode use signel PLL mode. + bit[3]=0: Enable HW AUX mode detection logic + =1: Disable HW AUX mode dettion logic +ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage. + +usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). + Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; + + When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: + 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; + VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, + Changing BL using VBIOS function is functional in both driver and non-driver present environment; + and enabling VariBri under the driver environment from PP table is optional. + + 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating + that BL control from GPU is expected. + VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 + Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but + it's per platform + and enabling VariBri under the driver environment from PP table is optional. + +ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. + Threshold on value to enter HTC_active state. +ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. + To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. +ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings. +ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled + =1: PCIE Power Gating Enabled + Bit[1]=0: DDR-DLL shut-down feature disabled. + 1: DDR-DLL shut-down feature enabled. + Bit[2]=0: DDR-PLL Power down feature disabled. + 1: DDR-PLL Power down feature enabled. +ulCPUCapInfo: TBD +usNBP0Voltage: VID for voltage on NB P0 State +usNBP1Voltage: VID for voltage on NB P1 State +usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement. +usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure +usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set + to indicate a range. + SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 + SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 + SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 + SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 +ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved. +ucUMAChannelNumber: System memory channel numbers. +ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default +ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. +ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. +sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high +ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. +ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. +ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. +ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. +ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. +usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. +usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz +ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode + [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped + [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color + [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used + [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) +**********************************************************************************************************************/ + +// this Table is used for Liano/Ontario APU +typedef struct _ATOM_FUSION_SYSTEM_INFO_V1 +{ + ATOM_INTEGRATED_SYSTEM_INFO_V6 sIntegratedSysInfo; + ULONG ulPowerplayTable[128]; +}ATOM_FUSION_SYSTEM_INFO_V1; + + +typedef struct _ATOM_TDP_CONFIG_BITS +{ +#if ATOM_BIG_ENDIAN + ULONG uReserved:2; + ULONG uTDP_Value:14; // Original TDP value in tens of milli watts + ULONG uCTDP_Value:14; // Override value in tens of milli watts + ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value)) +#else + ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value)) + ULONG uCTDP_Value:14; // Override value in tens of milli watts + ULONG uTDP_Value:14; // Original TDP value in tens of milli watts + ULONG uReserved:2; +#endif +}ATOM_TDP_CONFIG_BITS; + +typedef union _ATOM_TDP_CONFIG +{ + ATOM_TDP_CONFIG_BITS TDP_config; + ULONG TDP_config_all; +}ATOM_TDP_CONFIG; + +/********************************************************************************************************************** + ATOM_FUSION_SYSTEM_INFO_V1 Description +sIntegratedSysInfo: refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition. +ulPowerplayTable[128]: This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0] +**********************************************************************************************************************/ + +// this IntegrateSystemInfoTable is used for Trinity APU +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; + ULONG ulDentistVCOFreq; + ULONG ulBootUpUMAClock; + ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; + ULONG ulBootUpReqDisplayVector; + ULONG ulOtherDisplayMisc; + ULONG ulGPUCapInfo; + ULONG ulSB_MMIO_Base_Addr; + USHORT usRequestedPWMFreqInHz; + UCHAR ucHtcTmpLmt; + UCHAR ucHtcHystLmt; + ULONG ulMinEngineClock; + ULONG ulSystemConfig; + ULONG ulCPUCapInfo; + USHORT usNBP0Voltage; + USHORT usNBP1Voltage; + USHORT usBootUpNBVoltage; + USHORT usExtDispConnInfoOffset; + USHORT usPanelRefreshRateRange; + UCHAR ucMemoryType; + UCHAR ucUMAChannelNumber; + UCHAR strVBIOSMsg[40]; + ATOM_TDP_CONFIG asTdpConfig; + ULONG ulReserved[19]; + ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; + ULONG ulGMCRestoreResetTime; + ULONG ulMinimumNClk; + ULONG ulIdleNClk; + ULONG ulDDR_DLL_PowerUpTime; + ULONG ulDDR_PLL_PowerUpTime; + USHORT usPCIEClkSSPercentage; + USHORT usPCIEClkSSType; + USHORT usLvdsSSPercentage; + USHORT usLvdsSSpreadRateIn10Hz; + USHORT usHDMISSPercentage; + USHORT usHDMISSpreadRateIn10Hz; + USHORT usDVISSPercentage; + USHORT usDVISSpreadRateIn10Hz; + ULONG SclkDpmBoostMargin; + ULONG SclkDpmThrottleMargin; + USHORT SclkDpmTdpLimitPG; + USHORT SclkDpmTdpLimitBoost; + ULONG ulBoostEngineCLock; + UCHAR ulBoostVid_2bit; + UCHAR EnableBoost; + USHORT GnbTdpLimit; + USHORT usMaxLVDSPclkFreqInSingleLink; + UCHAR ucLvdsMisc; + UCHAR ucTravisLVDSVolAdjust; + UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms; + UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; + UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; + UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms; + UCHAR ucLVDSOffToOnDelay_in4Ms; + UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; + UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; + UCHAR ucMinAllowedBL_Level; + ULONG ulLCDBitDepthControlVal; + ULONG ulNbpStateMemclkFreq[4]; + USHORT usNBP2Voltage; + USHORT usNBP3Voltage; + ULONG ulNbpStateNClkFreq[4]; + UCHAR ucNBDPMEnable; + UCHAR ucReserved[3]; + UCHAR ucDPMState0VclkFid; + UCHAR ucDPMState0DclkFid; + UCHAR ucDPMState1VclkFid; + UCHAR ucDPMState1DclkFid; + UCHAR ucDPMState2VclkFid; + UCHAR ucDPMState2DclkFid; + UCHAR ucDPMState3VclkFid; + UCHAR ucDPMState3DclkFid; + ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; +}ATOM_INTEGRATED_SYSTEM_INFO_V1_7; + +// ulOtherDisplayMisc +#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01 +#define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT 0x02 +#define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT 0x04 +#define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT 0x08 + +// ulGPUCapInfo +#define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 +#define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE 0x02 +#define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT 0x08 +#define SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS 0x10 + +/********************************************************************************************************************** + ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description +ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock +ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. +ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. +sDISPCLK_Voltage: Report Display clock voltage requirement. + +ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects: + ATOM_DEVICE_CRT1_SUPPORT 0x0001 + ATOM_DEVICE_DFP1_SUPPORT 0x0008 + ATOM_DEVICE_DFP6_SUPPORT 0x0040 + ATOM_DEVICE_DFP2_SUPPORT 0x0080 + ATOM_DEVICE_DFP3_SUPPORT 0x0200 + ATOM_DEVICE_DFP4_SUPPORT 0x0400 + ATOM_DEVICE_DFP5_SUPPORT 0x0800 + ATOM_DEVICE_LCD1_SUPPORT 0x0002 +ulOtherDisplayMisc: bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS. + =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS. + bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS + =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS + bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS + =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS + bit[3]=0: VBIOS fast boot is disable + =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open) +ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode. + =1: TMDS/HDMI Coherent Mode use signel PLL mode. + bit[1]=0: DP mode use cascade PLL mode ( New for Trinity ) + =1: DP mode use single PLL mode + bit[3]=0: Enable AUX HW mode detection logic + =1: Disable AUX HW mode detection logic + +ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage. + +usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). + Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; + + When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: + 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; + VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, + Changing BL using VBIOS function is functional in both driver and non-driver present environment; + and enabling VariBri under the driver environment from PP table is optional. + + 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating + that BL control from GPU is expected. + VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 + Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but + it's per platform + and enabling VariBri under the driver environment from PP table is optional. + +ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. + Threshold on value to enter HTC_active state. +ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. + To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. +ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings. +ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled + =1: PCIE Power Gating Enabled + Bit[1]=0: DDR-DLL shut-down feature disabled. + 1: DDR-DLL shut-down feature enabled. + Bit[2]=0: DDR-PLL Power down feature disabled. + 1: DDR-PLL Power down feature enabled. +ulCPUCapInfo: TBD +usNBP0Voltage: VID for voltage on NB P0 State +usNBP1Voltage: VID for voltage on NB P1 State +usNBP2Voltage: VID for voltage on NB P2 State +usNBP3Voltage: VID for voltage on NB P3 State +usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement. +usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure +usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set + to indicate a range. + SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 + SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 + SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 + SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 +ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved. +ucUMAChannelNumber: System memory channel numbers. +ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default +ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. +ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. +sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high +ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. +ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. +ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. +ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. +ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. +usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. +usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz +ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode + [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped + [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color + [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used + [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) + [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4 +ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust + value to program Travis register LVDS_CTRL_4 +ucLVDSPwrOnSeqDIGONtoDE_in4Ms: LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ). + =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOnDEtoVARY_BL_in4Ms: LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ). + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffVARY_BLtoDE_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off. + =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffDEtoDIGON_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off. + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSOffToOnDelay_in4Ms: LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active. + =0 means to use VBIOS default delay which is 125 ( 500ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms: + LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms: + LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0. + +ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB pstate. + +**********************************************************************************************************************/ + +// this IntegrateSystemInfoTable is used for Kaveri & Kabini APU +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; + ULONG ulDentistVCOFreq; + ULONG ulBootUpUMAClock; + ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; + ULONG ulBootUpReqDisplayVector; + ULONG ulVBIOSMisc; + ULONG ulGPUCapInfo; + ULONG ulDISP_CLK2Freq; + USHORT usRequestedPWMFreqInHz; + UCHAR ucHtcTmpLmt; + UCHAR ucHtcHystLmt; + ULONG ulReserved2; + ULONG ulSystemConfig; + ULONG ulCPUCapInfo; + ULONG ulReserved3; + USHORT usGPUReservedSysMemSize; + USHORT usExtDispConnInfoOffset; + USHORT usPanelRefreshRateRange; + UCHAR ucMemoryType; + UCHAR ucUMAChannelNumber; + UCHAR strVBIOSMsg[40]; + ATOM_TDP_CONFIG asTdpConfig; + ULONG ulReserved[19]; + ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; + ULONG ulGMCRestoreResetTime; + ULONG ulReserved4; + ULONG ulIdleNClk; + ULONG ulDDR_DLL_PowerUpTime; + ULONG ulDDR_PLL_PowerUpTime; + USHORT usPCIEClkSSPercentage; + USHORT usPCIEClkSSType; + USHORT usLvdsSSPercentage; + USHORT usLvdsSSpreadRateIn10Hz; + USHORT usHDMISSPercentage; + USHORT usHDMISSpreadRateIn10Hz; + USHORT usDVISSPercentage; + USHORT usDVISSpreadRateIn10Hz; + ULONG ulGPUReservedSysMemBaseAddrLo; + ULONG ulGPUReservedSysMemBaseAddrHi; + ULONG ulReserved5[3]; + USHORT usMaxLVDSPclkFreqInSingleLink; + UCHAR ucLvdsMisc; + UCHAR ucTravisLVDSVolAdjust; + UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms; + UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; + UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; + UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms; + UCHAR ucLVDSOffToOnDelay_in4Ms; + UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; + UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; + UCHAR ucMinAllowedBL_Level; + ULONG ulLCDBitDepthControlVal; + ULONG ulNbpStateMemclkFreq[4]; + ULONG ulReserved6; + ULONG ulNbpStateNClkFreq[4]; + USHORT usNBPStateVoltage[4]; + USHORT usBootUpNBVoltage; + USHORT usReserved2; + ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; +}ATOM_INTEGRATED_SYSTEM_INFO_V1_8; + +/********************************************************************************************************************** + ATOM_INTEGRATED_SYSTEM_INFO_V1_8 Description +ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock +ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. +ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. +sDISPCLK_Voltage: Report Display clock frequency requirement on GNB voltage(up to 4 voltage levels). + +ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects: + ATOM_DEVICE_CRT1_SUPPORT 0x0001 + ATOM_DEVICE_DFP1_SUPPORT 0x0008 + ATOM_DEVICE_DFP6_SUPPORT 0x0040 + ATOM_DEVICE_DFP2_SUPPORT 0x0080 + ATOM_DEVICE_DFP3_SUPPORT 0x0200 + ATOM_DEVICE_DFP4_SUPPORT 0x0400 + ATOM_DEVICE_DFP5_SUPPORT 0x0800 + ATOM_DEVICE_LCD1_SUPPORT 0x0002 + +ulVBIOSMisc: Miscellenous flags for VBIOS requirement and interface + bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS. + =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS. + bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS + =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS + bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS + =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS + bit[3]=0: VBIOS fast boot is disable + =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open) + +ulGPUCapInfo: bit[0~2]= Reserved + bit[3]=0: Enable AUX HW mode detection logic + =1: Disable AUX HW mode detection logic + bit[4]=0: Disable DFS bypass feature + =1: Enable DFS bypass feature + +usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). + Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; + + When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: + 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; + VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, + Changing BL using VBIOS function is functional in both driver and non-driver present environment; + and enabling VariBri under the driver environment from PP table is optional. + + 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating + that BL control from GPU is expected. + VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 + Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but + it's per platform + and enabling VariBri under the driver environment from PP table is optional. + +ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. Threshold on value to enter HTC_active state. +ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. + To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. + +ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled + =1: PCIE Power Gating Enabled + Bit[1]=0: DDR-DLL shut-down feature disabled. + 1: DDR-DLL shut-down feature enabled. + Bit[2]=0: DDR-PLL Power down feature disabled. + 1: DDR-PLL Power down feature enabled. + Bit[3]=0: GNB DPM is disabled + =1: GNB DPM is enabled +ulCPUCapInfo: TBD + +usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure +usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set + to indicate a range. + SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 + SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 + SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 + SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 + +ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3;=5:GDDR5; [7:4] is reserved. +ucUMAChannelNumber: System memory channel numbers. + +strVBIOSMsg[40]: VBIOS boot up customized message string + +sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high + +ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. +ulIdleNClk: NCLK speed while memory runs in self-refresh state, used to calculate self-refresh latency. Unit in 10kHz. +ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. +ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. + +usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. +usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. + +usGPUReservedSysMemSize: Reserved system memory size for ACP engine in APU GNB, units in MB. 0/2/4MB based on CMOS options, current default could be 0MB. KV only, not on KB. +ulGPUReservedSysMemBaseAddrLo: Low 32 bits base address to the reserved system memory. +ulGPUReservedSysMemBaseAddrHi: High 32 bits base address to the reserved system memory. + +usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz +ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode + [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped + [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color + [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used + [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) + [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4 +ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust + value to program Travis register LVDS_CTRL_4 +ucLVDSPwrOnSeqDIGONtoDE_in4Ms: + LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ). + =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOnDEtoVARY_BL_in4Ms: + LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ). + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOffVARY_BLtoDE_in4Ms: + LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off. + =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOffDEtoDIGON_in4Ms: + LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off. + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSOffToOnDelay_in4Ms: + LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active. + =0 means to use VBIOS default delay which is 125 ( 500ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms: + LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms: + LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0. + +ulLCDBitDepthControlVal: GPU display control encoder bit dither control setting, used to program register mmFMT_BIT_DEPTH_CONTROL + +ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3). +ulNbpStateNClkFreq[4]: NB P-State NClk frequency in different NB P-State +usNBPStateVoltage[4]: NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage +usBootUpNBVoltage: NB P-State voltage during boot up before driver loaded +sExtDispConnInfo: Display connector information table provided to VBIOS + +**********************************************************************************************************************/ + +// this Table is used for Kaveri/Kabini APU +typedef struct _ATOM_FUSION_SYSTEM_INFO_V2 +{ + ATOM_INTEGRATED_SYSTEM_INFO_V1_8 sIntegratedSysInfo; // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition + ULONG ulPowerplayTable[128]; // Update comments here to link new powerplay table definition structure +}ATOM_FUSION_SYSTEM_INFO_V2; + + +/**************************************************************************/ +// This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design +//Memory SS Info Table +//Define Memory Clock SS chip ID +#define ICS91719 1 +#define ICS91720 2 + +//Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol +typedef struct _ATOM_I2C_DATA_RECORD +{ + UCHAR ucNunberOfBytes; //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop" + UCHAR ucI2CData[1]; //I2C data in bytes, should be less than 16 bytes usually +}ATOM_I2C_DATA_RECORD; + + +//Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information +typedef struct _ATOM_I2C_DEVICE_SETUP_INFO +{ + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //I2C line and HW/SW assisted cap. + UCHAR ucSSChipID; //SS chip being used + UCHAR ucSSChipSlaveAddr; //Slave Address to set up this SS chip + UCHAR ucNumOfI2CDataRecords; //number of data block + ATOM_I2C_DATA_RECORD asI2CData[1]; +}ATOM_I2C_DEVICE_SETUP_INFO; + +//========================================================================================== +typedef struct _ATOM_ASIC_MVDD_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1]; +}ATOM_ASIC_MVDD_INFO; + +//========================================================================================== +#define ATOM_MCLK_SS_INFO ATOM_ASIC_MVDD_INFO + +//========================================================================================== +/**************************************************************************/ + +typedef struct _ATOM_ASIC_SS_ASSIGNMENT +{ + ULONG ulTargetClockRange; //Clock Out frequence (VCO ), in unit of 10Khz + USHORT usSpreadSpectrumPercentage; //in unit of 0.01% + USHORT usSpreadRateInKhz; //in unit of kHz, modulation freq + UCHAR ucClockIndication; //Indicate which clock source needs SS + UCHAR ucSpreadSpectrumMode; //Bit1=0 Down Spread,=1 Center Spread. + UCHAR ucReserved[2]; +}ATOM_ASIC_SS_ASSIGNMENT; + +//Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type. +//SS is not required or enabled if a match is not found. +#define ASIC_INTERNAL_MEMORY_SS 1 +#define ASIC_INTERNAL_ENGINE_SS 2 +#define ASIC_INTERNAL_UVD_SS 3 +#define ASIC_INTERNAL_SS_ON_TMDS 4 +#define ASIC_INTERNAL_SS_ON_HDMI 5 +#define ASIC_INTERNAL_SS_ON_LVDS 6 +#define ASIC_INTERNAL_SS_ON_DP 7 +#define ASIC_INTERNAL_SS_ON_DCPLL 8 +#define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9 +#define ASIC_INTERNAL_VCE_SS 10 +#define ASIC_INTERNAL_GPUPLL_SS 11 + + +typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2 +{ + ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz + //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 ) + USHORT usSpreadSpectrumPercentage; //in unit of 0.01% or 0.001%, decided by ucSpreadSpectrumMode bit4 + USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq + UCHAR ucClockIndication; //Indicate which clock source needs SS + UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS + UCHAR ucReserved[2]; +}ATOM_ASIC_SS_ASSIGNMENT_V2; + +//ucSpreadSpectrumMode +//#define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000 +//#define ATOM_SS_DOWN_SPREAD_MODE 0x00000000 +//#define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001 +//#define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001 +//#define ATOM_INTERNAL_SS_MASK 0x00000000 +//#define ATOM_EXTERNAL_SS_MASK 0x00000002 + +typedef struct _ATOM_ASIC_INTERNAL_SS_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum[4]; +}ATOM_ASIC_INTERNAL_SS_INFO; + +typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_ASIC_SS_ASSIGNMENT_V2 asSpreadSpectrum[1]; //this is point only. +}ATOM_ASIC_INTERNAL_SS_INFO_V2; + +typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3 +{ + ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz + //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 ) + USHORT usSpreadSpectrumPercentage; //in unit of 0.01% + USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq + UCHAR ucClockIndication; //Indicate which clock source needs SS + UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS + UCHAR ucReserved[2]; +}ATOM_ASIC_SS_ASSIGNMENT_V3; + +//ATOM_ASIC_SS_ASSIGNMENT_V3.ucSpreadSpectrumMode +#define SS_MODE_V3_CENTRE_SPREAD_MASK 0x01 +#define SS_MODE_V3_EXTERNAL_SS_MASK 0x02 +#define SS_MODE_V3_PERCENTAGE_DIV_BY_1000_MASK 0x10 + +typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_ASIC_SS_ASSIGNMENT_V3 asSpreadSpectrum[1]; //this is pointer only. +}ATOM_ASIC_INTERNAL_SS_INFO_V3; + + +//==============================Scratch Pad Definition Portion=============================== +#define ATOM_DEVICE_CONNECT_INFO_DEF 0 +#define ATOM_ROM_LOCATION_DEF 1 +#define ATOM_TV_STANDARD_DEF 2 +#define ATOM_ACTIVE_INFO_DEF 3 +#define ATOM_LCD_INFO_DEF 4 +#define ATOM_DOS_REQ_INFO_DEF 5 +#define ATOM_ACC_CHANGE_INFO_DEF 6 +#define ATOM_DOS_MODE_INFO_DEF 7 +#define ATOM_I2C_CHANNEL_STATUS_DEF 8 +#define ATOM_I2C_CHANNEL_STATUS1_DEF 9 +#define ATOM_INTERNAL_TIMER_DEF 10 + +// BIOS_0_SCRATCH Definition +#define ATOM_S0_CRT1_MONO 0x00000001L +#define ATOM_S0_CRT1_COLOR 0x00000002L +#define ATOM_S0_CRT1_MASK (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR) + +#define ATOM_S0_TV1_COMPOSITE_A 0x00000004L +#define ATOM_S0_TV1_SVIDEO_A 0x00000008L +#define ATOM_S0_TV1_MASK_A (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A) + +#define ATOM_S0_CV_A 0x00000010L +#define ATOM_S0_CV_DIN_A 0x00000020L +#define ATOM_S0_CV_MASK_A (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A) + + +#define ATOM_S0_CRT2_MONO 0x00000100L +#define ATOM_S0_CRT2_COLOR 0x00000200L +#define ATOM_S0_CRT2_MASK (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR) + +#define ATOM_S0_TV1_COMPOSITE 0x00000400L +#define ATOM_S0_TV1_SVIDEO 0x00000800L +#define ATOM_S0_TV1_SCART 0x00004000L +#define ATOM_S0_TV1_MASK (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART) + +#define ATOM_S0_CV 0x00001000L +#define ATOM_S0_CV_DIN 0x00002000L +#define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN) + +#define ATOM_S0_DFP1 0x00010000L +#define ATOM_S0_DFP2 0x00020000L +#define ATOM_S0_LCD1 0x00040000L +#define ATOM_S0_LCD2 0x00080000L +#define ATOM_S0_DFP6 0x00100000L +#define ATOM_S0_DFP3 0x00200000L +#define ATOM_S0_DFP4 0x00400000L +#define ATOM_S0_DFP5 0x00800000L + +#define ATOM_S0_DFP_MASK ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5 | ATOM_S0_DFP6 + +#define ATOM_S0_FAD_REGISTER_BUG 0x02000000L // If set, indicates we are running a PCIE asic with + // the FAD/HDP reg access bug. Bit is read by DAL, this is obsolete from RV5xx + +#define ATOM_S0_THERMAL_STATE_MASK 0x1C000000L +#define ATOM_S0_THERMAL_STATE_SHIFT 26 + +#define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L +#define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29 + +#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1 +#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2 +#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3 +#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4 + +//Byte aligned definition for BIOS usage +#define ATOM_S0_CRT1_MONOb0 0x01 +#define ATOM_S0_CRT1_COLORb0 0x02 +#define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0) + +#define ATOM_S0_TV1_COMPOSITEb0 0x04 +#define ATOM_S0_TV1_SVIDEOb0 0x08 +#define ATOM_S0_TV1_MASKb0 (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0) + +#define ATOM_S0_CVb0 0x10 +#define ATOM_S0_CV_DINb0 0x20 +#define ATOM_S0_CV_MASKb0 (ATOM_S0_CVb0+ATOM_S0_CV_DINb0) + +#define ATOM_S0_CRT2_MONOb1 0x01 +#define ATOM_S0_CRT2_COLORb1 0x02 +#define ATOM_S0_CRT2_MASKb1 (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1) + +#define ATOM_S0_TV1_COMPOSITEb1 0x04 +#define ATOM_S0_TV1_SVIDEOb1 0x08 +#define ATOM_S0_TV1_SCARTb1 0x40 +#define ATOM_S0_TV1_MASKb1 (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1) + +#define ATOM_S0_CVb1 0x10 +#define ATOM_S0_CV_DINb1 0x20 +#define ATOM_S0_CV_MASKb1 (ATOM_S0_CVb1+ATOM_S0_CV_DINb1) + +#define ATOM_S0_DFP1b2 0x01 +#define ATOM_S0_DFP2b2 0x02 +#define ATOM_S0_LCD1b2 0x04 +#define ATOM_S0_LCD2b2 0x08 +#define ATOM_S0_DFP6b2 0x10 +#define ATOM_S0_DFP3b2 0x20 +#define ATOM_S0_DFP4b2 0x40 +#define ATOM_S0_DFP5b2 0x80 + + +#define ATOM_S0_THERMAL_STATE_MASKb3 0x1C +#define ATOM_S0_THERMAL_STATE_SHIFTb3 2 + +#define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0 +#define ATOM_S0_LCD1_SHIFT 18 + +// BIOS_1_SCRATCH Definition +#define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL +#define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L + +// BIOS_2_SCRATCH Definition +#define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL +#define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L +#define ATOM_S2_CURRENT_BL_LEVEL_SHIFT 8 + +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26 +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE 0x10000000L + +#define ATOM_S2_DEVICE_DPMS_STATE 0x00010000L +#define ATOM_S2_VRI_BRIGHT_ENABLE 0x20000000L + +#define ATOM_S2_DISPLAY_ROTATION_0_DEGREE 0x0 +#define ATOM_S2_DISPLAY_ROTATION_90_DEGREE 0x1 +#define ATOM_S2_DISPLAY_ROTATION_180_DEGREE 0x2 +#define ATOM_S2_DISPLAY_ROTATION_270_DEGREE 0x3 +#define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30 +#define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L + + +//Byte aligned definition for BIOS usage +#define ATOM_S2_TV1_STANDARD_MASKb0 0x0F +#define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF +#define ATOM_S2_DEVICE_DPMS_STATEb2 0x01 + +#define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C +#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10 +#define ATOM_S2_TMDS_COHERENT_MODEb3 0x10 // used by VBIOS code only, use coherent mode for TMDS/HDMI mode +#define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20 +#define ATOM_S2_ROTATION_STATE_MASKb3 0xC0 + + +// BIOS_3_SCRATCH Definition +#define ATOM_S3_CRT1_ACTIVE 0x00000001L +#define ATOM_S3_LCD1_ACTIVE 0x00000002L +#define ATOM_S3_TV1_ACTIVE 0x00000004L +#define ATOM_S3_DFP1_ACTIVE 0x00000008L +#define ATOM_S3_CRT2_ACTIVE 0x00000010L +#define ATOM_S3_LCD2_ACTIVE 0x00000020L +#define ATOM_S3_DFP6_ACTIVE 0x00000040L +#define ATOM_S3_DFP2_ACTIVE 0x00000080L +#define ATOM_S3_CV_ACTIVE 0x00000100L +#define ATOM_S3_DFP3_ACTIVE 0x00000200L +#define ATOM_S3_DFP4_ACTIVE 0x00000400L +#define ATOM_S3_DFP5_ACTIVE 0x00000800L + +#define ATOM_S3_DEVICE_ACTIVE_MASK 0x00000FFFL + +#define ATOM_S3_LCD_FULLEXPANSION_ACTIVE 0x00001000L +#define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L + +#define ATOM_S3_CRT1_CRTC_ACTIVE 0x00010000L +#define ATOM_S3_LCD1_CRTC_ACTIVE 0x00020000L +#define ATOM_S3_TV1_CRTC_ACTIVE 0x00040000L +#define ATOM_S3_DFP1_CRTC_ACTIVE 0x00080000L +#define ATOM_S3_CRT2_CRTC_ACTIVE 0x00100000L +#define ATOM_S3_LCD2_CRTC_ACTIVE 0x00200000L +#define ATOM_S3_DFP6_CRTC_ACTIVE 0x00400000L +#define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L +#define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L +#define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L +#define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L +#define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L + +#define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L +#define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L +//Below two definitions are not supported in pplib, but in the old powerplay in DAL +#define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L +#define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L + +//Byte aligned definition for BIOS usage +#define ATOM_S3_CRT1_ACTIVEb0 0x01 +#define ATOM_S3_LCD1_ACTIVEb0 0x02 +#define ATOM_S3_TV1_ACTIVEb0 0x04 +#define ATOM_S3_DFP1_ACTIVEb0 0x08 +#define ATOM_S3_CRT2_ACTIVEb0 0x10 +#define ATOM_S3_LCD2_ACTIVEb0 0x20 +#define ATOM_S3_DFP6_ACTIVEb0 0x40 +#define ATOM_S3_DFP2_ACTIVEb0 0x80 +#define ATOM_S3_CV_ACTIVEb1 0x01 +#define ATOM_S3_DFP3_ACTIVEb1 0x02 +#define ATOM_S3_DFP4_ACTIVEb1 0x04 +#define ATOM_S3_DFP5_ACTIVEb1 0x08 + +#define ATOM_S3_ACTIVE_CRTC1w0 0xFFF + +#define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01 +#define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02 +#define ATOM_S3_TV1_CRTC_ACTIVEb2 0x04 +#define ATOM_S3_DFP1_CRTC_ACTIVEb2 0x08 +#define ATOM_S3_CRT2_CRTC_ACTIVEb2 0x10 +#define ATOM_S3_LCD2_CRTC_ACTIVEb2 0x20 +#define ATOM_S3_DFP6_CRTC_ACTIVEb2 0x40 +#define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80 +#define ATOM_S3_CV_CRTC_ACTIVEb3 0x01 +#define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02 +#define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04 +#define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08 + +#define ATOM_S3_ACTIVE_CRTC2w1 0xFFF + +// BIOS_4_SCRATCH Definition +#define ATOM_S4_LCD1_PANEL_ID_MASK 0x000000FFL +#define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L +#define ATOM_S4_LCD1_REFRESH_SHIFT 8 + +//Byte aligned definition for BIOS usage +#define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF +#define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0 +#define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0 + +// BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!! +#define ATOM_S5_DOS_REQ_CRT1b0 0x01 +#define ATOM_S5_DOS_REQ_LCD1b0 0x02 +#define ATOM_S5_DOS_REQ_TV1b0 0x04 +#define ATOM_S5_DOS_REQ_DFP1b0 0x08 +#define ATOM_S5_DOS_REQ_CRT2b0 0x10 +#define ATOM_S5_DOS_REQ_LCD2b0 0x20 +#define ATOM_S5_DOS_REQ_DFP6b0 0x40 +#define ATOM_S5_DOS_REQ_DFP2b0 0x80 +#define ATOM_S5_DOS_REQ_CVb1 0x01 +#define ATOM_S5_DOS_REQ_DFP3b1 0x02 +#define ATOM_S5_DOS_REQ_DFP4b1 0x04 +#define ATOM_S5_DOS_REQ_DFP5b1 0x08 + +#define ATOM_S5_DOS_REQ_DEVICEw0 0x0FFF + +#define ATOM_S5_DOS_REQ_CRT1 0x0001 +#define ATOM_S5_DOS_REQ_LCD1 0x0002 +#define ATOM_S5_DOS_REQ_TV1 0x0004 +#define ATOM_S5_DOS_REQ_DFP1 0x0008 +#define ATOM_S5_DOS_REQ_CRT2 0x0010 +#define ATOM_S5_DOS_REQ_LCD2 0x0020 +#define ATOM_S5_DOS_REQ_DFP6 0x0040 +#define ATOM_S5_DOS_REQ_DFP2 0x0080 +#define ATOM_S5_DOS_REQ_CV 0x0100 +#define ATOM_S5_DOS_REQ_DFP3 0x0200 +#define ATOM_S5_DOS_REQ_DFP4 0x0400 +#define ATOM_S5_DOS_REQ_DFP5 0x0800 + +#define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0 +#define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0 +#define ATOM_S5_DOS_FORCE_CRT2b2 ATOM_S5_DOS_REQ_CRT2b0 +#define ATOM_S5_DOS_FORCE_CVb3 ATOM_S5_DOS_REQ_CVb1 +#define ATOM_S5_DOS_FORCE_DEVICEw1 (ATOM_S5_DOS_FORCE_CRT1b2+ATOM_S5_DOS_FORCE_TV1b2+ATOM_S5_DOS_FORCE_CRT2b2+\ + (ATOM_S5_DOS_FORCE_CVb3<<8)) + +// BIOS_6_SCRATCH Definition +#define ATOM_S6_DEVICE_CHANGE 0x00000001L +#define ATOM_S6_SCALER_CHANGE 0x00000002L +#define ATOM_S6_LID_CHANGE 0x00000004L +#define ATOM_S6_DOCKING_CHANGE 0x00000008L +#define ATOM_S6_ACC_MODE 0x00000010L +#define ATOM_S6_EXT_DESKTOP_MODE 0x00000020L +#define ATOM_S6_LID_STATE 0x00000040L +#define ATOM_S6_DOCK_STATE 0x00000080L +#define ATOM_S6_CRITICAL_STATE 0x00000100L +#define ATOM_S6_HW_I2C_BUSY_STATE 0x00000200L +#define ATOM_S6_THERMAL_STATE_CHANGE 0x00000400L +#define ATOM_S6_INTERRUPT_SET_BY_BIOS 0x00000800L +#define ATOM_S6_REQ_LCD_EXPANSION_FULL 0x00001000L //Normal expansion Request bit for LCD +#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO 0x00002000L //Aspect ratio expansion Request bit for LCD + +#define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L //This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion +#define ATOM_S6_I2C_STATE_CHANGE 0x00008000L //This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion + +#define ATOM_S6_ACC_REQ_CRT1 0x00010000L +#define ATOM_S6_ACC_REQ_LCD1 0x00020000L +#define ATOM_S6_ACC_REQ_TV1 0x00040000L +#define ATOM_S6_ACC_REQ_DFP1 0x00080000L +#define ATOM_S6_ACC_REQ_CRT2 0x00100000L +#define ATOM_S6_ACC_REQ_LCD2 0x00200000L +#define ATOM_S6_ACC_REQ_DFP6 0x00400000L +#define ATOM_S6_ACC_REQ_DFP2 0x00800000L +#define ATOM_S6_ACC_REQ_CV 0x01000000L +#define ATOM_S6_ACC_REQ_DFP3 0x02000000L +#define ATOM_S6_ACC_REQ_DFP4 0x04000000L +#define ATOM_S6_ACC_REQ_DFP5 0x08000000L + +#define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L +#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L +#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L +#define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L +#define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L + +//Byte aligned definition for BIOS usage +#define ATOM_S6_DEVICE_CHANGEb0 0x01 +#define ATOM_S6_SCALER_CHANGEb0 0x02 +#define ATOM_S6_LID_CHANGEb0 0x04 +#define ATOM_S6_DOCKING_CHANGEb0 0x08 +#define ATOM_S6_ACC_MODEb0 0x10 +#define ATOM_S6_EXT_DESKTOP_MODEb0 0x20 +#define ATOM_S6_LID_STATEb0 0x40 +#define ATOM_S6_DOCK_STATEb0 0x80 +#define ATOM_S6_CRITICAL_STATEb1 0x01 +#define ATOM_S6_HW_I2C_BUSY_STATEb1 0x02 +#define ATOM_S6_THERMAL_STATE_CHANGEb1 0x04 +#define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08 +#define ATOM_S6_REQ_LCD_EXPANSION_FULLb1 0x10 +#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20 + +#define ATOM_S6_ACC_REQ_CRT1b2 0x01 +#define ATOM_S6_ACC_REQ_LCD1b2 0x02 +#define ATOM_S6_ACC_REQ_TV1b2 0x04 +#define ATOM_S6_ACC_REQ_DFP1b2 0x08 +#define ATOM_S6_ACC_REQ_CRT2b2 0x10 +#define ATOM_S6_ACC_REQ_LCD2b2 0x20 +#define ATOM_S6_ACC_REQ_DFP6b2 0x40 +#define ATOM_S6_ACC_REQ_DFP2b2 0x80 +#define ATOM_S6_ACC_REQ_CVb3 0x01 +#define ATOM_S6_ACC_REQ_DFP3b3 0x02 +#define ATOM_S6_ACC_REQ_DFP4b3 0x04 +#define ATOM_S6_ACC_REQ_DFP5b3 0x08 + +#define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0 +#define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10 +#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20 +#define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3 0x40 +#define ATOM_S6_CONFIG_DISPLAY_CHANGEb3 0x80 + +#define ATOM_S6_DEVICE_CHANGE_SHIFT 0 +#define ATOM_S6_SCALER_CHANGE_SHIFT 1 +#define ATOM_S6_LID_CHANGE_SHIFT 2 +#define ATOM_S6_DOCKING_CHANGE_SHIFT 3 +#define ATOM_S6_ACC_MODE_SHIFT 4 +#define ATOM_S6_EXT_DESKTOP_MODE_SHIFT 5 +#define ATOM_S6_LID_STATE_SHIFT 6 +#define ATOM_S6_DOCK_STATE_SHIFT 7 +#define ATOM_S6_CRITICAL_STATE_SHIFT 8 +#define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT 9 +#define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT 10 +#define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT 11 +#define ATOM_S6_REQ_SCALER_SHIFT 12 +#define ATOM_S6_REQ_SCALER_ARATIO_SHIFT 13 +#define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT 14 +#define ATOM_S6_I2C_STATE_CHANGE_SHIFT 15 +#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT 28 +#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT 29 +#define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT 30 +#define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT 31 + +// BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!! +#define ATOM_S7_DOS_MODE_TYPEb0 0x03 +#define ATOM_S7_DOS_MODE_VGAb0 0x00 +#define ATOM_S7_DOS_MODE_VESAb0 0x01 +#define ATOM_S7_DOS_MODE_EXTb0 0x02 +#define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C +#define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0 +#define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01 +#define ATOM_S7_ASIC_INIT_COMPLETEb1 0x02 +#define ATOM_S7_ASIC_INIT_COMPLETE_MASK 0x00000200 +#define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF + +#define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8 + +// BIOS_8_SCRATCH Definition +#define ATOM_S8_I2C_CHANNEL_BUSY_MASK 0x00000FFFF +#define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK 0x0FFFF0000 + +#define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT 0 +#define ATOM_S8_I2C_ENGINE_BUSY_SHIFT 16 + +// BIOS_9_SCRATCH Definition +#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK +#define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK 0x0000FFFF +#endif +#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK +#define ATOM_S9_I2C_CHANNEL_ABORTED_MASK 0xFFFF0000 +#endif +#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT +#define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0 +#endif +#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT +#define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT 16 +#endif + + +#define ATOM_FLAG_SET 0x20 +#define ATOM_FLAG_CLEAR 0 +#define CLEAR_ATOM_S6_ACC_MODE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR) +#define SET_ATOM_S6_DEVICE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_SCALER_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_LID_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET) + +#define SET_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR) + +#define SET_ATOM_S6_DOCK_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR) + +#define SET_ATOM_S6_THERMAL_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET) +#define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET) + +#define SET_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR) + +#define SET_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR ) + +#define SET_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET ) +#define CLEAR_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR ) + +#define SET_ATOM_S6_I2C_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET ) + +#define SET_ATOM_S6_DISPLAY_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET ) + +#define SET_ATOM_S6_DEVICE_RECONFIG ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET) +#define CLEAR_ATOM_S0_LCD1 ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 )| ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR ) +#define SET_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET ) +#define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR ) + +/****************************************************************************/ +//Portion II: Definitions only used in Driver +/****************************************************************************/ + +// Macros used by driver +#ifdef __cplusplus +#define GetIndexIntoMasterTable(MasterOrData, FieldName) ((reinterpret_cast<char*>(&(static_cast<ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*>(0))->FieldName)-static_cast<char*>(0))/sizeof(USHORT)) + +#define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableFormatRevision )&0x3F) +#define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableContentRevision)&0x3F) +#else // not __cplusplus +#define GetIndexIntoMasterTable(MasterOrData, FieldName) (offsetof(ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES, FieldName)/sizeof(USHORT)) + +#define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F) +#define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F) +#endif // __cplusplus + +#define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION +#define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION + +/****************************************************************************/ +//Portion III: Definitinos only used in VBIOS +/****************************************************************************/ +#define ATOM_DAC_SRC 0x80 +#define ATOM_SRC_DAC1 0 +#define ATOM_SRC_DAC2 0x80 + +typedef struct _MEMORY_PLLINIT_PARAMETERS +{ + ULONG ulTargetMemoryClock; //In 10Khz unit + UCHAR ucAction; //not define yet + UCHAR ucFbDiv_Hi; //Fbdiv Hi byte + UCHAR ucFbDiv; //FB value + UCHAR ucPostDiv; //Post div +}MEMORY_PLLINIT_PARAMETERS; + +#define MEMORY_PLLINIT_PS_ALLOCATION MEMORY_PLLINIT_PARAMETERS + + +#define GPIO_PIN_WRITE 0x01 +#define GPIO_PIN_READ 0x00 + +typedef struct _GPIO_PIN_CONTROL_PARAMETERS +{ + UCHAR ucGPIO_ID; //return value, read from GPIO pins + UCHAR ucGPIOBitShift; //define which bit in uGPIOBitVal need to be update + UCHAR ucGPIOBitVal; //Set/Reset corresponding bit defined in ucGPIOBitMask + UCHAR ucAction; //=GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write +}GPIO_PIN_CONTROL_PARAMETERS; + +typedef struct _ENABLE_SCALER_PARAMETERS +{ + UCHAR ucScaler; // ATOM_SCALER1, ATOM_SCALER2 + UCHAR ucEnable; // ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION + UCHAR ucTVStandard; // + UCHAR ucPadding[1]; +}ENABLE_SCALER_PARAMETERS; +#define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS + +//ucEnable: +#define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION 0 +#define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION 1 +#define SCALER_ENABLE_2TAP_ALPHA_MODE 2 +#define SCALER_ENABLE_MULTITAP_MODE 3 + +typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS +{ + ULONG usHWIconHorzVertPosn; // Hardware Icon Vertical position + UCHAR ucHWIconVertOffset; // Hardware Icon Vertical offset + UCHAR ucHWIconHorzOffset; // Hardware Icon Horizontal offset + UCHAR ucSelection; // ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2 + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE +}ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS; + +typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION +{ + ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon; + ENABLE_CRTC_PARAMETERS sReserved; +}ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION; + +typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS +{ + USHORT usHight; // Image Hight + USHORT usWidth; // Image Width + UCHAR ucSurface; // Surface 1 or 2 + UCHAR ucPadding[3]; +}ENABLE_GRAPH_SURFACE_PARAMETERS; + +typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2 +{ + USHORT usHight; // Image Hight + USHORT usWidth; // Image Width + UCHAR ucSurface; // Surface 1 or 2 + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucPadding[2]; +}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2; + +typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3 +{ + USHORT usHight; // Image Hight + USHORT usWidth; // Image Width + UCHAR ucSurface; // Surface 1 or 2 + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + USHORT usDeviceId; // Active Device Id for this surface. If no device, set to 0. +}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3; + +typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4 +{ + USHORT usHight; // Image Hight + USHORT usWidth; // Image Width + USHORT usGraphPitch; + UCHAR ucColorDepth; + UCHAR ucPixelFormat; + UCHAR ucSurface; // Surface 1 or 2 + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucModeType; + UCHAR ucReserved; +}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4; + +// ucEnable +#define ATOM_GRAPH_CONTROL_SET_PITCH 0x0f +#define ATOM_GRAPH_CONTROL_SET_DISP_START 0x10 + +typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION +{ + ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface; + ENABLE_YUV_PS_ALLOCATION sReserved; // Don't set this one +}ENABLE_GRAPH_SURFACE_PS_ALLOCATION; + +typedef struct _MEMORY_CLEAN_UP_PARAMETERS +{ + USHORT usMemoryStart; //in 8Kb boundary, offset from memory base address + USHORT usMemorySize; //8Kb blocks aligned +}MEMORY_CLEAN_UP_PARAMETERS; +#define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS + +typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS +{ + USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC + USHORT usY_Size; +}GET_DISPLAY_SURFACE_SIZE_PARAMETERS; + +typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2 +{ + union{ + USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC + USHORT usSurface; + }; + USHORT usY_Size; + USHORT usDispXStart; + USHORT usDispYStart; +}GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2; + + +typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3 +{ + UCHAR ucLutId; + UCHAR ucAction; + USHORT usLutStartIndex; + USHORT usLutLength; + USHORT usLutOffsetInVram; +}PALETTE_DATA_CONTROL_PARAMETERS_V3; + +// ucAction: +#define PALETTE_DATA_AUTO_FILL 1 +#define PALETTE_DATA_READ 2 +#define PALETTE_DATA_WRITE 3 + + +typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2 +{ + UCHAR ucInterruptId; + UCHAR ucServiceId; + UCHAR ucStatus; + UCHAR ucReserved; +}INTERRUPT_SERVICE_PARAMETER_V2; + +// ucInterruptId +#define HDP1_INTERRUPT_ID 1 +#define HDP2_INTERRUPT_ID 2 +#define HDP3_INTERRUPT_ID 3 +#define HDP4_INTERRUPT_ID 4 +#define HDP5_INTERRUPT_ID 5 +#define HDP6_INTERRUPT_ID 6 +#define SW_INTERRUPT_ID 11 + +// ucAction +#define INTERRUPT_SERVICE_GEN_SW_INT 1 +#define INTERRUPT_SERVICE_GET_STATUS 2 + + // ucStatus +#define INTERRUPT_STATUS__INT_TRIGGER 1 +#define INTERRUPT_STATUS__HPD_HIGH 2 + +typedef struct _INDIRECT_IO_ACCESS +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR IOAccessSequence[256]; +} INDIRECT_IO_ACCESS; + +#define INDIRECT_READ 0x00 +#define INDIRECT_WRITE 0x80 + +#define INDIRECT_IO_MM 0 +#define INDIRECT_IO_PLL 1 +#define INDIRECT_IO_MC 2 +#define INDIRECT_IO_PCIE 3 +#define INDIRECT_IO_PCIEP 4 +#define INDIRECT_IO_NBMISC 5 +#define INDIRECT_IO_SMU 5 + +#define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ +#define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE +#define INDIRECT_IO_MC_READ INDIRECT_IO_MC | INDIRECT_READ +#define INDIRECT_IO_MC_WRITE INDIRECT_IO_MC | INDIRECT_WRITE +#define INDIRECT_IO_PCIE_READ INDIRECT_IO_PCIE | INDIRECT_READ +#define INDIRECT_IO_PCIE_WRITE INDIRECT_IO_PCIE | INDIRECT_WRITE +#define INDIRECT_IO_PCIEP_READ INDIRECT_IO_PCIEP | INDIRECT_READ +#define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE +#define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ +#define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE +#define INDIRECT_IO_SMU_READ INDIRECT_IO_SMU | INDIRECT_READ +#define INDIRECT_IO_SMU_WRITE INDIRECT_IO_SMU | INDIRECT_WRITE + +typedef struct _ATOM_OEM_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; +}ATOM_OEM_INFO; + +typedef struct _ATOM_TV_MODE +{ + UCHAR ucVMode_Num; //Video mode number + UCHAR ucTV_Mode_Num; //Internal TV mode number +}ATOM_TV_MODE; + +typedef struct _ATOM_BIOS_INT_TVSTD_MODE +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usTV_Mode_LUT_Offset; // Pointer to standard to internal number conversion table + USHORT usTV_FIFO_Offset; // Pointer to FIFO entry table + USHORT usNTSC_Tbl_Offset; // Pointer to SDTV_Mode_NTSC table + USHORT usPAL_Tbl_Offset; // Pointer to SDTV_Mode_PAL table + USHORT usCV_Tbl_Offset; // Pointer to SDTV_Mode_PAL table +}ATOM_BIOS_INT_TVSTD_MODE; + + +typedef struct _ATOM_TV_MODE_SCALER_PTR +{ + USHORT ucFilter0_Offset; //Pointer to filter format 0 coefficients + USHORT usFilter1_Offset; //Pointer to filter format 0 coefficients + UCHAR ucTV_Mode_Num; +}ATOM_TV_MODE_SCALER_PTR; + +typedef struct _ATOM_STANDARD_VESA_TIMING +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_DTD_FORMAT aModeTimings[16]; // 16 is not the real array number, just for initial allocation +}ATOM_STANDARD_VESA_TIMING; + + +typedef struct _ATOM_STD_FORMAT +{ + USHORT usSTD_HDisp; + USHORT usSTD_VDisp; + USHORT usSTD_RefreshRate; + USHORT usReserved; +}ATOM_STD_FORMAT; + +typedef struct _ATOM_VESA_TO_EXTENDED_MODE +{ + USHORT usVESA_ModeNumber; + USHORT usExtendedModeNumber; +}ATOM_VESA_TO_EXTENDED_MODE; + +typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76]; +}ATOM_VESA_TO_INTENAL_MODE_LUT; + +/*************** ATOM Memory Related Data Structure ***********************/ +typedef struct _ATOM_MEMORY_VENDOR_BLOCK{ + UCHAR ucMemoryType; + UCHAR ucMemoryVendor; + UCHAR ucAdjMCId; + UCHAR ucDynClkId; + ULONG ulDllResetClkRange; +}ATOM_MEMORY_VENDOR_BLOCK; + + +typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG{ +#if ATOM_BIG_ENDIAN + ULONG ucMemBlkId:8; + ULONG ulMemClockRange:24; +#else + ULONG ulMemClockRange:24; + ULONG ucMemBlkId:8; +#endif +}ATOM_MEMORY_SETTING_ID_CONFIG; + +typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS +{ + ATOM_MEMORY_SETTING_ID_CONFIG slAccess; + ULONG ulAccess; +}ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS; + + +typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK{ + ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID; + ULONG aulMemData[1]; +}ATOM_MEMORY_SETTING_DATA_BLOCK; + + +typedef struct _ATOM_INIT_REG_INDEX_FORMAT{ + USHORT usRegIndex; // MC register index + UCHAR ucPreRegDataLength; // offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf +}ATOM_INIT_REG_INDEX_FORMAT; + + +typedef struct _ATOM_INIT_REG_BLOCK{ + USHORT usRegIndexTblSize; //size of asRegIndexBuf + USHORT usRegDataBlkSize; //size of ATOM_MEMORY_SETTING_DATA_BLOCK + ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf[1]; + ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf[1]; +}ATOM_INIT_REG_BLOCK; + +#define END_OF_REG_INDEX_BLOCK 0x0ffff +#define END_OF_REG_DATA_BLOCK 0x00000000 +#define ATOM_INIT_REG_MASK_FLAG 0x80 //Not used in BIOS +#define CLOCK_RANGE_HIGHEST 0x00ffffff + +#define VALUE_DWORD SIZEOF ULONG +#define VALUE_SAME_AS_ABOVE 0 +#define VALUE_MASK_DWORD 0x84 + +#define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1) +#define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1) +#define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1) +//#define ACCESS_MCIODEBUGIND 0x40 //defined in BIOS code +#define ACCESS_PLACEHOLDER 0x80 + +typedef struct _ATOM_MC_INIT_PARAM_TABLE +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usAdjustARB_SEQDataOffset; + USHORT usMCInitMemTypeTblOffset; + USHORT usMCInitCommonTblOffset; + USHORT usMCInitPowerDownTblOffset; + ULONG ulARB_SEQDataBuf[32]; + ATOM_INIT_REG_BLOCK asMCInitMemType; + ATOM_INIT_REG_BLOCK asMCInitCommon; +}ATOM_MC_INIT_PARAM_TABLE; + + +#define _4Mx16 0x2 +#define _4Mx32 0x3 +#define _8Mx16 0x12 +#define _8Mx32 0x13 +#define _16Mx16 0x22 +#define _16Mx32 0x23 +#define _32Mx16 0x32 +#define _32Mx32 0x33 +#define _64Mx8 0x41 +#define _64Mx16 0x42 +#define _64Mx32 0x43 +#define _128Mx8 0x51 +#define _128Mx16 0x52 +#define _128Mx32 0x53 +#define _256Mx8 0x61 +#define _256Mx16 0x62 +#define _512Mx8 0x71 + +#define SAMSUNG 0x1 +#define INFINEON 0x2 +#define ELPIDA 0x3 +#define ETRON 0x4 +#define NANYA 0x5 +#define HYNIX 0x6 +#define MOSEL 0x7 +#define WINBOND 0x8 +#define ESMT 0x9 +#define MICRON 0xF + +#define QIMONDA INFINEON +#define PROMOS MOSEL +#define KRETON INFINEON +#define ELIXIR NANYA +#define MEZZA ELPIDA + + +/////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// + +#define UCODE_ROM_START_ADDRESS 0x1b800 +#define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode + +//uCode block header for reference + +typedef struct _MCuCodeHeader +{ + ULONG ulSignature; + UCHAR ucRevision; + UCHAR ucChecksum; + UCHAR ucReserved1; + UCHAR ucReserved2; + USHORT usParametersLength; + USHORT usUCodeLength; + USHORT usReserved1; + USHORT usReserved2; +} MCuCodeHeader; + +////////////////////////////////////////////////////////////////////////////////// + +#define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16 + +#define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF +typedef struct _ATOM_VRAM_MODULE_V1 +{ + ULONG ulReserved; + USHORT usEMRSValue; + USHORT usMRSValue; + USHORT usReserved; + UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module + UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved; + UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender + UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... + UCHAR ucRow; // Number of Row,in power of 2; + UCHAR ucColumn; // Number of Column,in power of 2; + UCHAR ucBank; // Nunber of Bank; + UCHAR ucRank; // Number of Rank, in power of 2 + UCHAR ucChannelNum; // Number of channel; + UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 + UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; + UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; + UCHAR ucReserved[2]; +}ATOM_VRAM_MODULE_V1; + + +typedef struct _ATOM_VRAM_MODULE_V2 +{ + ULONG ulReserved; + ULONG ulFlags; // To enable/disable functionalities based on memory type + ULONG ulEngineClock; // Override of default engine clock for particular memory type + ULONG ulMemoryClock; // Override of default memory clock for particular memory type + USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type + USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type + USHORT usEMRSValue; + USHORT usMRSValue; + USHORT usReserved; + UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module + UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; + UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed + UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... + UCHAR ucRow; // Number of Row,in power of 2; + UCHAR ucColumn; // Number of Column,in power of 2; + UCHAR ucBank; // Nunber of Bank; + UCHAR ucRank; // Number of Rank, in power of 2 + UCHAR ucChannelNum; // Number of channel; + UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 + UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; + UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; + UCHAR ucRefreshRateFactor; + UCHAR ucReserved[3]; +}ATOM_VRAM_MODULE_V2; + + +typedef struct _ATOM_MEMORY_TIMING_FORMAT +{ + ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing + union{ + USHORT usMRS; // mode register + USHORT usDDR3_MR0; + }; + union{ + USHORT usEMRS; // extended mode register + USHORT usDDR3_MR1; + }; + UCHAR ucCL; // CAS latency + UCHAR ucWL; // WRITE Latency + UCHAR uctRAS; // tRAS + UCHAR uctRC; // tRC + UCHAR uctRFC; // tRFC + UCHAR uctRCDR; // tRCDR + UCHAR uctRCDW; // tRCDW + UCHAR uctRP; // tRP + UCHAR uctRRD; // tRRD + UCHAR uctWR; // tWR + UCHAR uctWTR; // tWTR + UCHAR uctPDIX; // tPDIX + UCHAR uctFAW; // tFAW + UCHAR uctAOND; // tAOND + union + { + struct { + UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon + UCHAR ucReserved; + }; + USHORT usDDR3_MR2; + }; +}ATOM_MEMORY_TIMING_FORMAT; + + +typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1 +{ + ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing + USHORT usMRS; // mode register + USHORT usEMRS; // extended mode register + UCHAR ucCL; // CAS latency + UCHAR ucWL; // WRITE Latency + UCHAR uctRAS; // tRAS + UCHAR uctRC; // tRC + UCHAR uctRFC; // tRFC + UCHAR uctRCDR; // tRCDR + UCHAR uctRCDW; // tRCDW + UCHAR uctRP; // tRP + UCHAR uctRRD; // tRRD + UCHAR uctWR; // tWR + UCHAR uctWTR; // tWTR + UCHAR uctPDIX; // tPDIX + UCHAR uctFAW; // tFAW + UCHAR uctAOND; // tAOND + UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon +////////////////////////////////////GDDR parameters/////////////////////////////////// + UCHAR uctCCDL; // + UCHAR uctCRCRL; // + UCHAR uctCRCWL; // + UCHAR uctCKE; // + UCHAR uctCKRSE; // + UCHAR uctCKRSX; // + UCHAR uctFAW32; // + UCHAR ucMR5lo; // + UCHAR ucMR5hi; // + UCHAR ucTerminator; +}ATOM_MEMORY_TIMING_FORMAT_V1; + +typedef struct _ATOM_MEMORY_TIMING_FORMAT_V2 +{ + ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing + USHORT usMRS; // mode register + USHORT usEMRS; // extended mode register + UCHAR ucCL; // CAS latency + UCHAR ucWL; // WRITE Latency + UCHAR uctRAS; // tRAS + UCHAR uctRC; // tRC + UCHAR uctRFC; // tRFC + UCHAR uctRCDR; // tRCDR + UCHAR uctRCDW; // tRCDW + UCHAR uctRP; // tRP + UCHAR uctRRD; // tRRD + UCHAR uctWR; // tWR + UCHAR uctWTR; // tWTR + UCHAR uctPDIX; // tPDIX + UCHAR uctFAW; // tFAW + UCHAR uctAOND; // tAOND + UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon +////////////////////////////////////GDDR parameters/////////////////////////////////// + UCHAR uctCCDL; // + UCHAR uctCRCRL; // + UCHAR uctCRCWL; // + UCHAR uctCKE; // + UCHAR uctCKRSE; // + UCHAR uctCKRSX; // + UCHAR uctFAW32; // + UCHAR ucMR4lo; // + UCHAR ucMR4hi; // + UCHAR ucMR5lo; // + UCHAR ucMR5hi; // + UCHAR ucTerminator; + UCHAR ucReserved; +}ATOM_MEMORY_TIMING_FORMAT_V2; + +typedef struct _ATOM_MEMORY_FORMAT +{ + ULONG ulDllDisClock; // memory DLL will be disable when target memory clock is below this clock + union{ + USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type + USHORT usDDR3_Reserved; // Not used for DDR3 memory + }; + union{ + USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type + USHORT usDDR3_MR3; // Used for DDR3 memory + }; + UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; + UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed + UCHAR ucRow; // Number of Row,in power of 2; + UCHAR ucColumn; // Number of Column,in power of 2; + UCHAR ucBank; // Nunber of Bank; + UCHAR ucRank; // Number of Rank, in power of 2 + UCHAR ucBurstSize; // burst size, 0= burst size=4 1= burst size=8 + UCHAR ucDllDisBit; // position of DLL Enable/Disable bit in EMRS ( Extended Mode Register ) + UCHAR ucRefreshRateFactor; // memory refresh rate in unit of ms + UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 + UCHAR ucPreamble; //[7:4] Write Preamble, [3:0] Read Preamble + UCHAR ucMemAttrib; // Memory Device Addribute, like RDBI/WDBI etc + ATOM_MEMORY_TIMING_FORMAT asMemTiming[5]; //Memory Timing block sort from lower clock to higher clock +}ATOM_MEMORY_FORMAT; + + +typedef struct _ATOM_VRAM_MODULE_V3 +{ + ULONG ulChannelMapCfg; // board dependent paramenter:Channel combination + USHORT usSize; // size of ATOM_VRAM_MODULE_V3 + USHORT usDefaultMVDDQ; // board dependent parameter:Default Memory Core Voltage + USHORT usDefaultMVDDC; // board dependent parameter:Default Memory IO Voltage + UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module + UCHAR ucChannelNum; // board dependent parameter:Number of channel; + UCHAR ucChannelSize; // board dependent parameter:32bit or 64bit + UCHAR ucVREFI; // board dependnt parameter: EXT or INT +160mv to -140mv + UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters + UCHAR ucFlag; // To enable/disable functionalities based on memory type + ATOM_MEMORY_FORMAT asMemory; // describ all of video memory parameters from memory spec +}ATOM_VRAM_MODULE_V3; + + +//ATOM_VRAM_MODULE_V3.ucNPL_RT +#define NPL_RT_MASK 0x0f +#define BATTERY_ODT_MASK 0xc0 + +#define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3 + +typedef struct _ATOM_VRAM_MODULE_V4 +{ + ULONG ulChannelMapCfg; // board dependent parameter: Channel combination + USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE + USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) + USHORT usReserved; + UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module + UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; + UCHAR ucChannelNum; // Number of channels present in this module config + UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits + UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 + UCHAR ucFlag; // To enable/disable functionalities based on memory type + UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 + UCHAR ucVREFI; // board dependent parameter + UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters + UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble + UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros + UCHAR ucReserved[3]; + +//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level + union{ + USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type + USHORT usDDR3_Reserved; + }; + union{ + USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type + USHORT usDDR3_MR3; // Used for DDR3 memory + }; + UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed + UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) + UCHAR ucReserved2[2]; + ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];//Memory Timing block sort from lower clock to higher clock +}ATOM_VRAM_MODULE_V4; + +#define VRAM_MODULE_V4_MISC_RANK_MASK 0x3 +#define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1 +#define VRAM_MODULE_V4_MISC_BL_MASK 0x4 +#define VRAM_MODULE_V4_MISC_BL8 0x4 +#define VRAM_MODULE_V4_MISC_DUAL_CS 0x10 + +typedef struct _ATOM_VRAM_MODULE_V5 +{ + ULONG ulChannelMapCfg; // board dependent parameter: Channel combination + USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE + USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) + USHORT usReserved; + UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module + UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; + UCHAR ucChannelNum; // Number of channels present in this module config + UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits + UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 + UCHAR ucFlag; // To enable/disable functionalities based on memory type + UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 + UCHAR ucVREFI; // board dependent parameter + UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters + UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble + UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros + UCHAR ucReserved[3]; + +//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level + USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type + USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type + UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed + UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) + UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth + UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth + ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock +}ATOM_VRAM_MODULE_V5; + +typedef struct _ATOM_VRAM_MODULE_V6 +{ + ULONG ulChannelMapCfg; // board dependent parameter: Channel combination + USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE + USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) + USHORT usReserved; + UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module + UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; + UCHAR ucChannelNum; // Number of channels present in this module config + UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits + UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 + UCHAR ucFlag; // To enable/disable functionalities based on memory type + UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 + UCHAR ucVREFI; // board dependent parameter + UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters + UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble + UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! + // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros + UCHAR ucReserved[3]; + +//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level + USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type + USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type + UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed + UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) + UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth + UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth + ATOM_MEMORY_TIMING_FORMAT_V2 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock +}ATOM_VRAM_MODULE_V6; + +typedef struct _ATOM_VRAM_MODULE_V7 +{ +// Design Specific Values + ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP + USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7 + USHORT usPrivateReserved; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) + USHORT usEnableChannels; // bit vector which indicate which channels are enabled + UCHAR ucExtMemoryID; // Current memory module ID + UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5 + UCHAR ucChannelNum; // Number of mem. channels supported in this module + UCHAR ucChannelWidth; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT + UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 + UCHAR ucReserve; // Former container for Mx_FLAGS like DBI_AC_MODE_ENABLE_ASIC for GDDR4. Not used now. + UCHAR ucMisc; // RANK_OF_THISMEMORY etc. + UCHAR ucVREFI; // Not used. + UCHAR ucNPL_RT; // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2. + UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble + UCHAR ucMemorySize; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros + USHORT usSEQSettingOffset; + UCHAR ucReserved; +// Memory Module specific values + USHORT usEMRS2Value; // EMRS2/MR2 Value. + USHORT usEMRS3Value; // EMRS3/MR3 Value. + UCHAR ucMemoryVenderID; // [7:4] Revision, [3:0] Vendor code + UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) + UCHAR ucFIFODepth; // FIFO depth can be detected during vendor detection, here is hardcoded per memory + UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth + char strMemPNString[20]; // part number end with '0'. +}ATOM_VRAM_MODULE_V7; + +typedef struct _ATOM_VRAM_INFO_V2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucNumOfVRAMModule; + ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; +}ATOM_VRAM_INFO_V2; + +typedef struct _ATOM_VRAM_INFO_V3 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting + USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting + USHORT usRerseved; + UCHAR aVID_PinsShift[9]; // 8 bit strap maximum+terminator + UCHAR ucNumOfVRAMModule; + ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; + ATOM_INIT_REG_BLOCK asMemPatch; // for allocation + // ATOM_INIT_REG_BLOCK aMemAdjust; +}ATOM_VRAM_INFO_V3; + +#define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3 + +typedef struct _ATOM_VRAM_INFO_V4 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting + USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting + USHORT usRerseved; + UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 + ULONG ulMemDQ7_0BitRemap; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] + UCHAR ucReservde[4]; + UCHAR ucNumOfVRAMModule; + ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; + ATOM_INIT_REG_BLOCK asMemPatch; // for allocation + // ATOM_INIT_REG_BLOCK aMemAdjust; +}ATOM_VRAM_INFO_V4; + +typedef struct _ATOM_VRAM_INFO_HEADER_V2_1 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting + USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting + USHORT usPerBytePresetOffset; // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings + USHORT usReserved[3]; + UCHAR ucNumOfVRAMModule; // indicate number of VRAM module + UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list + UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version + UCHAR ucReserved; + ATOM_VRAM_MODULE_V7 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; +}ATOM_VRAM_INFO_HEADER_V2_1; + + +typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR aVID_PinsShift[9]; //8 bit strap maximum+terminator +}ATOM_VRAM_GPIO_DETECTION_INFO; + + +typedef struct _ATOM_MEMORY_TRAINING_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucTrainingLoop; + UCHAR ucReserved[3]; + ATOM_INIT_REG_BLOCK asMemTrainingSetting; +}ATOM_MEMORY_TRAINING_INFO; + + +typedef struct SW_I2C_CNTL_DATA_PARAMETERS +{ + UCHAR ucControl; + UCHAR ucData; + UCHAR ucSatus; + UCHAR ucTemp; +} SW_I2C_CNTL_DATA_PARAMETERS; + +#define SW_I2C_CNTL_DATA_PS_ALLOCATION SW_I2C_CNTL_DATA_PARAMETERS + +typedef struct _SW_I2C_IO_DATA_PARAMETERS +{ + USHORT GPIO_Info; + UCHAR ucAct; + UCHAR ucData; + } SW_I2C_IO_DATA_PARAMETERS; + +#define SW_I2C_IO_DATA_PS_ALLOCATION SW_I2C_IO_DATA_PARAMETERS + +/****************************SW I2C CNTL DEFINITIONS**********************/ +#define SW_I2C_IO_RESET 0 +#define SW_I2C_IO_GET 1 +#define SW_I2C_IO_DRIVE 2 +#define SW_I2C_IO_SET 3 +#define SW_I2C_IO_START 4 + +#define SW_I2C_IO_CLOCK 0 +#define SW_I2C_IO_DATA 0x80 + +#define SW_I2C_IO_ZERO 0 +#define SW_I2C_IO_ONE 0x100 + +#define SW_I2C_CNTL_READ 0 +#define SW_I2C_CNTL_WRITE 1 +#define SW_I2C_CNTL_START 2 +#define SW_I2C_CNTL_STOP 3 +#define SW_I2C_CNTL_OPEN 4 +#define SW_I2C_CNTL_CLOSE 5 +#define SW_I2C_CNTL_WRITE1BIT 6 + +//==============================VESA definition Portion=============================== +#define VESA_OEM_PRODUCT_REV "01.00" +#define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB //refer to VBE spec p.32, no TTY support +#define VESA_MODE_WIN_ATTRIBUTE 7 +#define VESA_WIN_SIZE 64 + +typedef struct _PTR_32_BIT_STRUCTURE +{ + USHORT Offset16; + USHORT Segment16; +} PTR_32_BIT_STRUCTURE; + +typedef union _PTR_32_BIT_UNION +{ + PTR_32_BIT_STRUCTURE SegmentOffset; + ULONG Ptr32_Bit; +} PTR_32_BIT_UNION; + +typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE +{ + UCHAR VbeSignature[4]; + USHORT VbeVersion; + PTR_32_BIT_UNION OemStringPtr; + UCHAR Capabilities[4]; + PTR_32_BIT_UNION VideoModePtr; + USHORT TotalMemory; +} VBE_1_2_INFO_BLOCK_UPDATABLE; + + +typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE +{ + VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock; + USHORT OemSoftRev; + PTR_32_BIT_UNION OemVendorNamePtr; + PTR_32_BIT_UNION OemProductNamePtr; + PTR_32_BIT_UNION OemProductRevPtr; +} VBE_2_0_INFO_BLOCK_UPDATABLE; + +typedef union _VBE_VERSION_UNION +{ + VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock; + VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock; +} VBE_VERSION_UNION; + +typedef struct _VBE_INFO_BLOCK +{ + VBE_VERSION_UNION UpdatableVBE_Info; + UCHAR Reserved[222]; + UCHAR OemData[256]; +} VBE_INFO_BLOCK; + +typedef struct _VBE_FP_INFO +{ + USHORT HSize; + USHORT VSize; + USHORT FPType; + UCHAR RedBPP; + UCHAR GreenBPP; + UCHAR BlueBPP; + UCHAR ReservedBPP; + ULONG RsvdOffScrnMemSize; + ULONG RsvdOffScrnMEmPtr; + UCHAR Reserved[14]; +} VBE_FP_INFO; + +typedef struct _VESA_MODE_INFO_BLOCK +{ +// Mandatory information for all VBE revisions + USHORT ModeAttributes; // dw ? ; mode attributes + UCHAR WinAAttributes; // db ? ; window A attributes + UCHAR WinBAttributes; // db ? ; window B attributes + USHORT WinGranularity; // dw ? ; window granularity + USHORT WinSize; // dw ? ; window size + USHORT WinASegment; // dw ? ; window A start segment + USHORT WinBSegment; // dw ? ; window B start segment + ULONG WinFuncPtr; // dd ? ; real mode pointer to window function + USHORT BytesPerScanLine;// dw ? ; bytes per scan line + +//; Mandatory information for VBE 1.2 and above + USHORT XResolution; // dw ? ; horizontal resolution in pixels or characters + USHORT YResolution; // dw ? ; vertical resolution in pixels or characters + UCHAR XCharSize; // db ? ; character cell width in pixels + UCHAR YCharSize; // db ? ; character cell height in pixels + UCHAR NumberOfPlanes; // db ? ; number of memory planes + UCHAR BitsPerPixel; // db ? ; bits per pixel + UCHAR NumberOfBanks; // db ? ; number of banks + UCHAR MemoryModel; // db ? ; memory model type + UCHAR BankSize; // db ? ; bank size in KB + UCHAR NumberOfImagePages;// db ? ; number of images + UCHAR ReservedForPageFunction;//db 1 ; reserved for page function + +//; Direct Color fields(required for direct/6 and YUV/7 memory models) + UCHAR RedMaskSize; // db ? ; size of direct color red mask in bits + UCHAR RedFieldPosition; // db ? ; bit position of lsb of red mask + UCHAR GreenMaskSize; // db ? ; size of direct color green mask in bits + UCHAR GreenFieldPosition; // db ? ; bit position of lsb of green mask + UCHAR BlueMaskSize; // db ? ; size of direct color blue mask in bits + UCHAR BlueFieldPosition; // db ? ; bit position of lsb of blue mask + UCHAR RsvdMaskSize; // db ? ; size of direct color reserved mask in bits + UCHAR RsvdFieldPosition; // db ? ; bit position of lsb of reserved mask + UCHAR DirectColorModeInfo;// db ? ; direct color mode attributes + +//; Mandatory information for VBE 2.0 and above + ULONG PhysBasePtr; // dd ? ; physical address for flat memory frame buffer + ULONG Reserved_1; // dd 0 ; reserved - always set to 0 + USHORT Reserved_2; // dw 0 ; reserved - always set to 0 + +//; Mandatory information for VBE 3.0 and above + USHORT LinBytesPerScanLine; // dw ? ; bytes per scan line for linear modes + UCHAR BnkNumberOfImagePages;// db ? ; number of images for banked modes + UCHAR LinNumberOfImagPages; // db ? ; number of images for linear modes + UCHAR LinRedMaskSize; // db ? ; size of direct color red mask(linear modes) + UCHAR LinRedFieldPosition; // db ? ; bit position of lsb of red mask(linear modes) + UCHAR LinGreenMaskSize; // db ? ; size of direct color green mask(linear modes) + UCHAR LinGreenFieldPosition;// db ? ; bit position of lsb of green mask(linear modes) + UCHAR LinBlueMaskSize; // db ? ; size of direct color blue mask(linear modes) + UCHAR LinBlueFieldPosition; // db ? ; bit position of lsb of blue mask(linear modes) + UCHAR LinRsvdMaskSize; // db ? ; size of direct color reserved mask(linear modes) + UCHAR LinRsvdFieldPosition; // db ? ; bit position of lsb of reserved mask(linear modes) + ULONG MaxPixelClock; // dd ? ; maximum pixel clock(in Hz) for graphics mode + UCHAR Reserved; // db 190 dup (0) +} VESA_MODE_INFO_BLOCK; + +// BIOS function CALLS +#define ATOM_BIOS_EXTENDED_FUNCTION_CODE 0xA0 // ATI Extended Function code +#define ATOM_BIOS_FUNCTION_COP_MODE 0x00 +#define ATOM_BIOS_FUNCTION_SHORT_QUERY1 0x04 +#define ATOM_BIOS_FUNCTION_SHORT_QUERY2 0x05 +#define ATOM_BIOS_FUNCTION_SHORT_QUERY3 0x06 +#define ATOM_BIOS_FUNCTION_GET_DDC 0x0B +#define ATOM_BIOS_FUNCTION_ASIC_DSTATE 0x0E +#define ATOM_BIOS_FUNCTION_DEBUG_PLAY 0x0F +#define ATOM_BIOS_FUNCTION_STV_STD 0x16 +#define ATOM_BIOS_FUNCTION_DEVICE_DET 0x17 +#define ATOM_BIOS_FUNCTION_DEVICE_SWITCH 0x18 + +#define ATOM_BIOS_FUNCTION_PANEL_CONTROL 0x82 +#define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET 0x83 +#define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH 0x84 +#define ATOM_BIOS_FUNCTION_HW_ICON 0x8A +#define ATOM_BIOS_FUNCTION_SET_CMOS 0x8B +#define SUB_FUNCTION_UPDATE_DISPLAY_INFO 0x8000 // Sub function 80 +#define SUB_FUNCTION_UPDATE_EXPANSION_INFO 0x8100 // Sub function 80 + +#define ATOM_BIOS_FUNCTION_DISPLAY_INFO 0x8D +#define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF 0x8E +#define ATOM_BIOS_FUNCTION_VIDEO_STATE 0x8F +#define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE 0x0300 // Sub function 03 +#define ATOM_SUB_FUNCTION_GET_LIDSTATE 0x0700 // Sub function 7 +#define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE 0x1400 // Notify caller the current thermal state +#define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300 // Notify caller the current critical state +#define ATOM_SUB_FUNCTION_SET_LIDSTATE 0x8500 // Sub function 85 +#define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900// Sub function 89 +#define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT 0x9400 // Notify caller that ADC is supported + + +#define ATOM_BIOS_FUNCTION_VESA_DPMS 0x4F10 // Set DPMS +#define ATOM_SUB_FUNCTION_SET_DPMS 0x0001 // BL: Sub function 01 +#define ATOM_SUB_FUNCTION_GET_DPMS 0x0002 // BL: Sub function 02 +#define ATOM_PARAMETER_VESA_DPMS_ON 0x0000 // BH Parameter for DPMS ON. +#define ATOM_PARAMETER_VESA_DPMS_STANDBY 0x0100 // BH Parameter for DPMS STANDBY +#define ATOM_PARAMETER_VESA_DPMS_SUSPEND 0x0200 // BH Parameter for DPMS SUSPEND +#define ATOM_PARAMETER_VESA_DPMS_OFF 0x0400 // BH Parameter for DPMS OFF +#define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON 0x0800 // BH Parameter for DPMS REDUCE ON (NOT SUPPORTED) + +#define ATOM_BIOS_RETURN_CODE_MASK 0x0000FF00L +#define ATOM_BIOS_REG_HIGH_MASK 0x0000FF00L +#define ATOM_BIOS_REG_LOW_MASK 0x000000FFL + +// structure used for VBIOS only + +//DispOutInfoTable +typedef struct _ASIC_TRANSMITTER_INFO +{ + USHORT usTransmitterObjId; + USHORT usSupportDevice; + UCHAR ucTransmitterCmdTblId; + UCHAR ucConfig; + UCHAR ucEncoderID; //available 1st encoder ( default ) + UCHAR ucOptionEncoderID; //available 2nd encoder ( optional ) + UCHAR uc2ndEncoderID; + UCHAR ucReserved; +}ASIC_TRANSMITTER_INFO; + +#define ASIC_TRANSMITTER_INFO_CONFIG__DVO_SDR_MODE 0x01 +#define ASIC_TRANSMITTER_INFO_CONFIG__COHERENT_MODE 0x02 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODEROBJ_ID_MASK 0xc4 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_A 0x00 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_B 0x04 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_C 0x40 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_D 0x44 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_E 0x80 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_F 0x84 + +typedef struct _ASIC_ENCODER_INFO +{ + UCHAR ucEncoderID; + UCHAR ucEncoderConfig; + USHORT usEncoderCmdTblId; +}ASIC_ENCODER_INFO; + +typedef struct _ATOM_DISP_OUT_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT ptrTransmitterInfo; + USHORT ptrEncoderInfo; + ASIC_TRANSMITTER_INFO asTransmitterInfo[1]; + ASIC_ENCODER_INFO asEncoderInfo[1]; +}ATOM_DISP_OUT_INFO; + +typedef struct _ATOM_DISP_OUT_INFO_V2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT ptrTransmitterInfo; + USHORT ptrEncoderInfo; + USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary. + ASIC_TRANSMITTER_INFO asTransmitterInfo[1]; + ASIC_ENCODER_INFO asEncoderInfo[1]; +}ATOM_DISP_OUT_INFO_V2; + + +typedef struct _ATOM_DISP_CLOCK_ID { + UCHAR ucPpllId; + UCHAR ucPpllAttribute; +}ATOM_DISP_CLOCK_ID; + +// ucPpllAttribute +#define CLOCK_SOURCE_SHAREABLE 0x01 +#define CLOCK_SOURCE_DP_MODE 0x02 +#define CLOCK_SOURCE_NONE_DP_MODE 0x04 + +//DispOutInfoTable +typedef struct _ASIC_TRANSMITTER_INFO_V2 +{ + USHORT usTransmitterObjId; + USHORT usDispClkIdOffset; // point to clock source id list supported by Encoder Object + UCHAR ucTransmitterCmdTblId; + UCHAR ucConfig; + UCHAR ucEncoderID; // available 1st encoder ( default ) + UCHAR ucOptionEncoderID; // available 2nd encoder ( optional ) + UCHAR uc2ndEncoderID; + UCHAR ucReserved; +}ASIC_TRANSMITTER_INFO_V2; + +typedef struct _ATOM_DISP_OUT_INFO_V3 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT ptrTransmitterInfo; + USHORT ptrEncoderInfo; + USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary. + USHORT usReserved; + UCHAR ucDCERevision; + UCHAR ucMaxDispEngineNum; + UCHAR ucMaxActiveDispEngineNum; + UCHAR ucMaxPPLLNum; + UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE + UCHAR ucDispCaps; + UCHAR ucReserved[2]; + ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only +}ATOM_DISP_OUT_INFO_V3; + +//ucDispCaps +#define DISPLAY_CAPS__DP_PCLK_FROM_PPLL 0x01 +#define DISPLAY_CAPS__FORCE_DISPDEV_CONNECTED 0x02 + +typedef enum CORE_REF_CLK_SOURCE{ + CLOCK_SRC_XTALIN=0, + CLOCK_SRC_XO_IN=1, + CLOCK_SRC_XO_IN2=2, +}CORE_REF_CLK_SOURCE; + +// DispDevicePriorityInfo +typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT asDevicePriority[16]; +}ATOM_DISPLAY_DEVICE_PRIORITY_INFO; + +//ProcessAuxChannelTransactionTable +typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS +{ + USHORT lpAuxRequest; + USHORT lpDataOut; + UCHAR ucChannelID; + union + { + UCHAR ucReplyStatus; + UCHAR ucDelay; + }; + UCHAR ucDataOutLen; + UCHAR ucReserved; +}PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS; + +//ProcessAuxChannelTransactionTable +typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 +{ + USHORT lpAuxRequest; + USHORT lpDataOut; + UCHAR ucChannelID; + union + { + UCHAR ucReplyStatus; + UCHAR ucDelay; + }; + UCHAR ucDataOutLen; + UCHAR ucHPD_ID; //=0: HPD1, =1: HPD2, =2: HPD3, =3: HPD4, =4: HPD5, =5: HPD6 +}PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2; + +#define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS + +//GetSinkType + +typedef struct _DP_ENCODER_SERVICE_PARAMETERS +{ + USHORT ucLinkClock; + union + { + UCHAR ucConfig; // for DP training command + UCHAR ucI2cId; // use for GET_SINK_TYPE command + }; + UCHAR ucAction; + UCHAR ucStatus; + UCHAR ucLaneNum; + UCHAR ucReserved[2]; +}DP_ENCODER_SERVICE_PARAMETERS; + +// ucAction +#define ATOM_DP_ACTION_GET_SINK_TYPE 0x01 +/* obsolete */ +#define ATOM_DP_ACTION_TRAINING_START 0x02 +#define ATOM_DP_ACTION_TRAINING_COMPLETE 0x03 +#define ATOM_DP_ACTION_TRAINING_PATTERN_SEL 0x04 +#define ATOM_DP_ACTION_SET_VSWING_PREEMP 0x05 +#define ATOM_DP_ACTION_GET_VSWING_PREEMP 0x06 +#define ATOM_DP_ACTION_BLANKING 0x07 + +// ucConfig +#define ATOM_DP_CONFIG_ENCODER_SEL_MASK 0x03 +#define ATOM_DP_CONFIG_DIG1_ENCODER 0x00 +#define ATOM_DP_CONFIG_DIG2_ENCODER 0x01 +#define ATOM_DP_CONFIG_EXTERNAL_ENCODER 0x02 +#define ATOM_DP_CONFIG_LINK_SEL_MASK 0x04 +#define ATOM_DP_CONFIG_LINK_A 0x00 +#define ATOM_DP_CONFIG_LINK_B 0x04 +/* /obselete */ +#define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS + + +typedef struct _DP_ENCODER_SERVICE_PARAMETERS_V2 +{ + USHORT usExtEncoderObjId; // External Encoder Object Id, output parameter only, use when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION + UCHAR ucAuxId; + UCHAR ucAction; + UCHAR ucSinkType; // Iput and Output parameters. + UCHAR ucHPDId; // Input parameter, used when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION + UCHAR ucReserved[2]; +}DP_ENCODER_SERVICE_PARAMETERS_V2; + +typedef struct _DP_ENCODER_SERVICE_PS_ALLOCATION_V2 +{ + DP_ENCODER_SERVICE_PARAMETERS_V2 asDPServiceParam; + PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 asAuxParam; +}DP_ENCODER_SERVICE_PS_ALLOCATION_V2; + +// ucAction +#define DP_SERVICE_V2_ACTION_GET_SINK_TYPE 0x01 +#define DP_SERVICE_V2_ACTION_DET_LCD_CONNECTION 0x02 + + +// DP_TRAINING_TABLE +#define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR +#define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 ) +#define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 16 ) +#define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 24 ) +#define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 32) +#define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 40) +#define DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 48) +#define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 60) +#define DP_I2C_AUX_DDC_WRITE_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 64) +#define DP_I2C_AUX_DDC_READ_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 72) +#define DP_I2C_AUX_DDC_READ_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 76) +#define DP_I2C_AUX_DDC_WRITE_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 80) +#define DP_I2C_AUX_DDC_READ_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 84) + +typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS +{ + UCHAR ucI2CSpeed; + union + { + UCHAR ucRegIndex; + UCHAR ucStatus; + }; + USHORT lpI2CDataOut; + UCHAR ucFlag; + UCHAR ucTransBytes; + UCHAR ucSlaveAddr; + UCHAR ucLineNumber; +}PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS; + +#define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS + +//ucFlag +#define HW_I2C_WRITE 1 +#define HW_I2C_READ 0 +#define I2C_2BYTE_ADDR 0x02 + +/****************************************************************************/ +// Structures used by HW_Misc_OperationTable +/****************************************************************************/ +typedef struct _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 +{ + UCHAR ucCmd; // Input: To tell which action to take + UCHAR ucReserved[3]; + ULONG ulReserved; +}ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1; + +typedef struct _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1 +{ + UCHAR ucReturnCode; // Output: Return value base on action was taken + UCHAR ucReserved[3]; + ULONG ulReserved; +}ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1; + +// Actions code +#define ATOM_GET_SDI_SUPPORT 0xF0 + +// Return code +#define ATOM_UNKNOWN_CMD 0 +#define ATOM_FEATURE_NOT_SUPPORTED 1 +#define ATOM_FEATURE_SUPPORTED 2 + +typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION +{ + ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 sInput_Output; + PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS sReserved; +}ATOM_HW_MISC_OPERATION_PS_ALLOCATION; + +/****************************************************************************/ + +typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2 +{ + UCHAR ucHWBlkInst; // HW block instance, 0, 1, 2, ... + UCHAR ucReserved[3]; +}SET_HWBLOCK_INSTANCE_PARAMETER_V2; + +#define HWBLKINST_INSTANCE_MASK 0x07 +#define HWBLKINST_HWBLK_MASK 0xF0 +#define HWBLKINST_HWBLK_SHIFT 0x04 + +//ucHWBlock +#define SELECT_DISP_ENGINE 0 +#define SELECT_DISP_PLL 1 +#define SELECT_DCIO_UNIPHY_LINK0 2 +#define SELECT_DCIO_UNIPHY_LINK1 3 +#define SELECT_DCIO_IMPCAL 4 +#define SELECT_DCIO_DIG 6 +#define SELECT_CRTC_PIXEL_RATE 7 +#define SELECT_VGA_BLK 8 + +// DIGTransmitterInfoTable structure used to program UNIPHY settings +typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock + USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info + USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range + USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info + USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings +}DIG_TRANSMITTER_INFO_HEADER_V3_1; + +typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_2{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock + USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info + USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range + USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info + USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings + USHORT usDPSSRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy SS Pll register Info + USHORT usDPSSSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy SS Pll Settings +}DIG_TRANSMITTER_INFO_HEADER_V3_2; + +typedef struct _CLOCK_CONDITION_REGESTER_INFO{ + USHORT usRegisterIndex; + UCHAR ucStartBit; + UCHAR ucEndBit; +}CLOCK_CONDITION_REGESTER_INFO; + +typedef struct _CLOCK_CONDITION_SETTING_ENTRY{ + USHORT usMaxClockFreq; + UCHAR ucEncodeMode; + UCHAR ucPhySel; + ULONG ulAnalogSetting[1]; +}CLOCK_CONDITION_SETTING_ENTRY; + +typedef struct _CLOCK_CONDITION_SETTING_INFO{ + USHORT usEntrySize; + CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1]; +}CLOCK_CONDITION_SETTING_INFO; + +typedef struct _PHY_CONDITION_REG_VAL{ + ULONG ulCondition; + ULONG ulRegVal; +}PHY_CONDITION_REG_VAL; + +typedef struct _PHY_CONDITION_REG_VAL_V2{ + ULONG ulCondition; + UCHAR ucCondition2; + ULONG ulRegVal; +}PHY_CONDITION_REG_VAL_V2; + +typedef struct _PHY_CONDITION_REG_INFO{ + USHORT usRegIndex; + USHORT usSize; + PHY_CONDITION_REG_VAL asRegVal[1]; +}PHY_CONDITION_REG_INFO; + +typedef struct _PHY_CONDITION_REG_INFO_V2{ + USHORT usRegIndex; + USHORT usSize; + PHY_CONDITION_REG_VAL_V2 asRegVal[1]; +}PHY_CONDITION_REG_INFO_V2; + +typedef struct _PHY_ANALOG_SETTING_INFO{ + UCHAR ucEncodeMode; + UCHAR ucPhySel; + USHORT usSize; + PHY_CONDITION_REG_INFO asAnalogSetting[1]; +}PHY_ANALOG_SETTING_INFO; + +typedef struct _PHY_ANALOG_SETTING_INFO_V2{ + UCHAR ucEncodeMode; + UCHAR ucPhySel; + USHORT usSize; + PHY_CONDITION_REG_INFO_V2 asAnalogSetting[1]; +}PHY_ANALOG_SETTING_INFO_V2; + +typedef struct _GFX_HAVESTING_PARAMETERS { + UCHAR ucGfxBlkId; //GFX blk id to be harvested, like CU, RB or PRIM + UCHAR ucReserved; //reserved + UCHAR ucActiveUnitNumPerSH; //requested active CU/RB/PRIM number per shader array + UCHAR ucMaxUnitNumPerSH; //max CU/RB/PRIM number per shader array +} GFX_HAVESTING_PARAMETERS; + +//ucGfxBlkId +#define GFX_HARVESTING_CU_ID 0 +#define GFX_HARVESTING_RB_ID 1 +#define GFX_HARVESTING_PRIM_ID 2 + +/****************************************************************************/ +//Portion VI: Definitinos for vbios MC scratch registers that driver used +/****************************************************************************/ + +#define MC_MISC0__MEMORY_TYPE_MASK 0xF0000000 +#define MC_MISC0__MEMORY_TYPE__GDDR1 0x10000000 +#define MC_MISC0__MEMORY_TYPE__DDR2 0x20000000 +#define MC_MISC0__MEMORY_TYPE__GDDR3 0x30000000 +#define MC_MISC0__MEMORY_TYPE__GDDR4 0x40000000 +#define MC_MISC0__MEMORY_TYPE__GDDR5 0x50000000 +#define MC_MISC0__MEMORY_TYPE__HBM 0x60000000 +#define MC_MISC0__MEMORY_TYPE__DDR3 0xB0000000 + +#define ATOM_MEM_TYPE_DDR_STRING "DDR" +#define ATOM_MEM_TYPE_DDR2_STRING "DDR2" +#define ATOM_MEM_TYPE_GDDR3_STRING "GDDR3" +#define ATOM_MEM_TYPE_GDDR4_STRING "GDDR4" +#define ATOM_MEM_TYPE_GDDR5_STRING "GDDR5" +#define ATOM_MEM_TYPE_HBM_STRING "HBM" +#define ATOM_MEM_TYPE_DDR3_STRING "DDR3" + +/****************************************************************************/ +//Portion VI: Definitinos being oboselete +/****************************************************************************/ + +//========================================================================================== +//Remove the definitions below when driver is ready! +typedef struct _ATOM_DAC_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMaxFrequency; // in 10kHz unit + USHORT usReserved; +}ATOM_DAC_INFO; + + +typedef struct _COMPASSIONATE_DATA +{ + ATOM_COMMON_TABLE_HEADER sHeader; + + //============================== DAC1 portion + UCHAR ucDAC1_BG_Adjustment; + UCHAR ucDAC1_DAC_Adjustment; + USHORT usDAC1_FORCE_Data; + //============================== DAC2 portion + UCHAR ucDAC2_CRT2_BG_Adjustment; + UCHAR ucDAC2_CRT2_DAC_Adjustment; + USHORT usDAC2_CRT2_FORCE_Data; + USHORT usDAC2_CRT2_MUX_RegisterIndex; + UCHAR ucDAC2_CRT2_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low + UCHAR ucDAC2_NTSC_BG_Adjustment; + UCHAR ucDAC2_NTSC_DAC_Adjustment; + USHORT usDAC2_TV1_FORCE_Data; + USHORT usDAC2_TV1_MUX_RegisterIndex; + UCHAR ucDAC2_TV1_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low + UCHAR ucDAC2_CV_BG_Adjustment; + UCHAR ucDAC2_CV_DAC_Adjustment; + USHORT usDAC2_CV_FORCE_Data; + USHORT usDAC2_CV_MUX_RegisterIndex; + UCHAR ucDAC2_CV_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low + UCHAR ucDAC2_PAL_BG_Adjustment; + UCHAR ucDAC2_PAL_DAC_Adjustment; + USHORT usDAC2_TV2_FORCE_Data; +}COMPASSIONATE_DATA; + +/****************************Supported Device Info Table Definitions**********************/ +// ucConnectInfo: +// [7:4] - connector type +// = 1 - VGA connector +// = 2 - DVI-I +// = 3 - DVI-D +// = 4 - DVI-A +// = 5 - SVIDEO +// = 6 - COMPOSITE +// = 7 - LVDS +// = 8 - DIGITAL LINK +// = 9 - SCART +// = 0xA - HDMI_type A +// = 0xB - HDMI_type B +// = 0xE - Special case1 (DVI+DIN) +// Others=TBD +// [3:0] - DAC Associated +// = 0 - no DAC +// = 1 - DACA +// = 2 - DACB +// = 3 - External DAC +// Others=TBD +// + +typedef struct _ATOM_CONNECTOR_INFO +{ +#if ATOM_BIG_ENDIAN + UCHAR bfConnectorType:4; + UCHAR bfAssociatedDAC:4; +#else + UCHAR bfAssociatedDAC:4; + UCHAR bfConnectorType:4; +#endif +}ATOM_CONNECTOR_INFO; + +typedef union _ATOM_CONNECTOR_INFO_ACCESS +{ + ATOM_CONNECTOR_INFO sbfAccess; + UCHAR ucAccess; +}ATOM_CONNECTOR_INFO_ACCESS; + +typedef struct _ATOM_CONNECTOR_INFO_I2C +{ + ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo; + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; +}ATOM_CONNECTOR_INFO_I2C; + + +typedef struct _ATOM_SUPPORTED_DEVICES_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDeviceSupport; + ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO]; +}ATOM_SUPPORTED_DEVICES_INFO; + +#define NO_INT_SRC_MAPPED 0xFF + +typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP +{ + UCHAR ucIntSrcBitmap; +}ATOM_CONNECTOR_INC_SRC_BITMAP; + +typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDeviceSupport; + ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2]; + ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2]; +}ATOM_SUPPORTED_DEVICES_INFO_2; + +typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDeviceSupport; + ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE]; + ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE]; +}ATOM_SUPPORTED_DEVICES_INFO_2d1; + +#define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1 + + + +typedef struct _ATOM_MISC_CONTROL_INFO +{ + USHORT usFrequency; + UCHAR ucPLL_ChargePump; // PLL charge-pump gain control + UCHAR ucPLL_DutyCycle; // PLL duty cycle control + UCHAR ucPLL_VCO_Gain; // PLL VCO gain control + UCHAR ucPLL_VoltageSwing; // PLL driver voltage swing control +}ATOM_MISC_CONTROL_INFO; + + +#define ATOM_MAX_MISC_INFO 4 + +typedef struct _ATOM_TMDS_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMaxFrequency; // in 10Khz + ATOM_MISC_CONTROL_INFO asMiscInfo[ATOM_MAX_MISC_INFO]; +}ATOM_TMDS_INFO; + + +typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE +{ + UCHAR ucTVStandard; //Same as TV standards defined above, + UCHAR ucPadding[1]; +}ATOM_ENCODER_ANALOG_ATTRIBUTE; + +typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE +{ + UCHAR ucAttribute; //Same as other digital encoder attributes defined above + UCHAR ucPadding[1]; +}ATOM_ENCODER_DIGITAL_ATTRIBUTE; + +typedef union _ATOM_ENCODER_ATTRIBUTE +{ + ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib; + ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib; +}ATOM_ENCODER_ATTRIBUTE; + + +typedef struct _DVO_ENCODER_CONTROL_PARAMETERS +{ + USHORT usPixelClock; + USHORT usEncoderID; + UCHAR ucDeviceType; //Use ATOM_DEVICE_xxx1_Index to indicate device type only. + UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT + ATOM_ENCODER_ATTRIBUTE usDevAttr; +}DVO_ENCODER_CONTROL_PARAMETERS; + +typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION +{ + DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder; + WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion +}DVO_ENCODER_CONTROL_PS_ALLOCATION; + + +#define ATOM_XTMDS_ASIC_SI164_ID 1 +#define ATOM_XTMDS_ASIC_SI178_ID 2 +#define ATOM_XTMDS_ASIC_TFP513_ID 3 +#define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001 +#define ATOM_XTMDS_SUPPORTED_DUALLINK 0x00000002 +#define ATOM_XTMDS_MVPU_FPGA 0x00000004 + + +typedef struct _ATOM_XTMDS_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usSingleLinkMaxFrequency; + ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //Point the ID on which I2C is used to control external chip + UCHAR ucXtransimitterID; + UCHAR ucSupportedLink; // Bit field, bit0=1, single link supported;bit1=1,dual link supported + UCHAR ucSequnceAlterID; // Even with the same external TMDS asic, it's possible that the program seqence alters + // due to design. This ID is used to alert driver that the sequence is not "standard"! + UCHAR ucMasterAddress; // Address to control Master xTMDS Chip + UCHAR ucSlaveAddress; // Address to control Slave xTMDS Chip +}ATOM_XTMDS_INFO; + +typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS +{ + UCHAR ucEnable; // ATOM_ENABLE=On or ATOM_DISABLE=Off + UCHAR ucDevice; // ATOM_DEVICE_DFP1_INDEX.... + UCHAR ucPadding[2]; +}DFP_DPMS_STATUS_CHANGE_PARAMETERS; + +/****************************Legacy Power Play Table Definitions **********************/ + +//Definitions for ulPowerPlayMiscInfo +#define ATOM_PM_MISCINFO_SPLIT_CLOCK 0x00000000L +#define ATOM_PM_MISCINFO_USING_MCLK_SRC 0x00000001L +#define ATOM_PM_MISCINFO_USING_SCLK_SRC 0x00000002L + +#define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT 0x00000004L +#define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH 0x00000008L + +#define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN 0x00000010L + +#define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN 0x00000020L +#define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN 0x00000040L +#define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE 0x00000080L //When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program + +#define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN 0x00000100L +#define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN 0x00000200L +#define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN 0x00000400L +#define ATOM_PM_MISCINFO_LOAD_BALANCE_EN 0x00000800L +#define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE 0x00001000L +#define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L +#define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE 0x00004000L + +#define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE 0x00008000L +#define ATOM_PM_MISCINFO_OVER_CLOCK_MODE 0x00010000L +#define ATOM_PM_MISCINFO_OVER_DRIVE_MODE 0x00020000L +#define ATOM_PM_MISCINFO_POWER_SAVING_MODE 0x00040000L +#define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE 0x00080000L + +#define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK 0x00300000L //0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved +#define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT 20 + +#define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE 0x00400000L +#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2 0x00800000L +#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4 0x01000000L +#define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN 0x02000000L //When set, Dynamic +#define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN 0x04000000L //When set, Dynamic +#define ATOM_PM_MISCINFO_3D_ACCELERATION_EN 0x08000000L //When set, This mode is for acceleated 3D mode + +#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK 0x70000000L //1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks) +#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT 28 +#define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS 0x80000000L + +#define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE 0x00000001L +#define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT 0x00000002L +#define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN 0x00000004L +#define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO 0x00000008L +#define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE 0x00000010L +#define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN 0x00000020L +#define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE 0x00000040L //If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption. + //If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback +#define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC 0x00000080L +#define ATOM_PM_MISCINFO2_STUTTER_MODE_EN 0x00000100L +#define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE 0x00000200L + +//ucTableFormatRevision=1 +//ucTableContentRevision=1 +typedef struct _ATOM_POWERMODE_INFO +{ + ULONG ulMiscInfo; //The power level should be arranged in ascending order + ULONG ulReserved1; // must set to 0 + ULONG ulReserved2; // must set to 0 + USHORT usEngineClock; + USHORT usMemoryClock; + UCHAR ucVoltageDropIndex; // index to GPIO table + UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + UCHAR ucNumPciELanes; // number of PCIE lanes +}ATOM_POWERMODE_INFO; + +//ucTableFormatRevision=2 +//ucTableContentRevision=1 +typedef struct _ATOM_POWERMODE_INFO_V2 +{ + ULONG ulMiscInfo; //The power level should be arranged in ascending order + ULONG ulMiscInfo2; + ULONG ulEngineClock; + ULONG ulMemoryClock; + UCHAR ucVoltageDropIndex; // index to GPIO table + UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + UCHAR ucNumPciELanes; // number of PCIE lanes +}ATOM_POWERMODE_INFO_V2; + +//ucTableFormatRevision=2 +//ucTableContentRevision=2 +typedef struct _ATOM_POWERMODE_INFO_V3 +{ + ULONG ulMiscInfo; //The power level should be arranged in ascending order + ULONG ulMiscInfo2; + ULONG ulEngineClock; + ULONG ulMemoryClock; + UCHAR ucVoltageDropIndex; // index to Core (VDDC) votage table + UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + UCHAR ucNumPciELanes; // number of PCIE lanes + UCHAR ucVDDCI_VoltageDropIndex; // index to VDDCI votage table +}ATOM_POWERMODE_INFO_V3; + + +#define ATOM_MAX_NUMBEROF_POWER_BLOCK 8 + +#define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN 0x01 +#define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE 0x02 + +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63 0x01 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032 0x02 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030 0x03 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649 0x04 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64 0x05 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375 0x06 +#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512 0x07 // Andigilog + + +typedef struct _ATOM_POWERPLAY_INFO +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucOverdriveThermalController; + UCHAR ucOverdriveI2cLine; + UCHAR ucOverdriveIntBitmap; + UCHAR ucOverdriveControllerAddress; + UCHAR ucSizeOfPowerModeEntry; + UCHAR ucNumOfPowerModeEntries; + ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; +}ATOM_POWERPLAY_INFO; + +typedef struct _ATOM_POWERPLAY_INFO_V2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucOverdriveThermalController; + UCHAR ucOverdriveI2cLine; + UCHAR ucOverdriveIntBitmap; + UCHAR ucOverdriveControllerAddress; + UCHAR ucSizeOfPowerModeEntry; + UCHAR ucNumOfPowerModeEntries; + ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; +}ATOM_POWERPLAY_INFO_V2; + +typedef struct _ATOM_POWERPLAY_INFO_V3 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + UCHAR ucOverdriveThermalController; + UCHAR ucOverdriveI2cLine; + UCHAR ucOverdriveIntBitmap; + UCHAR ucOverdriveControllerAddress; + UCHAR ucSizeOfPowerModeEntry; + UCHAR ucNumOfPowerModeEntries; + ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; +}ATOM_POWERPLAY_INFO_V3; + + +// Following definitions are for compatibility issue in different SW components. +#define ATOM_MASTER_DATA_TABLE_REVISION 0x01 +#define Object_Info Object_Header +#define AdjustARB_SEQ MC_InitParameter +#define VRAM_GPIO_DetectionInfo VoltageObjectInfo +#define ASIC_VDDCI_Info ASIC_ProfilingInfo +#define ASIC_MVDDQ_Info MemoryTrainingInfo +#define SS_Info PPLL_SS_Info +#define ASIC_MVDDC_Info ASIC_InternalSS_Info +#define DispDevicePriorityInfo SaveRestoreInfo +#define DispOutInfo TV_VideoMode + + +#define ATOM_ENCODER_OBJECT_TABLE ATOM_OBJECT_TABLE +#define ATOM_CONNECTOR_OBJECT_TABLE ATOM_OBJECT_TABLE + +//New device naming, remove them when both DAL/VBIOS is ready +#define DFP2I_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS +#define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS + +#define DFP1X_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS +#define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS + +#define DFP1I_OUTPUT_CONTROL_PARAMETERS DFP1_OUTPUT_CONTROL_PARAMETERS +#define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION + +#define ATOM_DEVICE_DFP1I_SUPPORT ATOM_DEVICE_DFP1_SUPPORT +#define ATOM_DEVICE_DFP1X_SUPPORT ATOM_DEVICE_DFP2_SUPPORT + +#define ATOM_DEVICE_DFP1I_INDEX ATOM_DEVICE_DFP1_INDEX +#define ATOM_DEVICE_DFP1X_INDEX ATOM_DEVICE_DFP2_INDEX + +#define ATOM_DEVICE_DFP2I_INDEX 0x00000009 +#define ATOM_DEVICE_DFP2I_SUPPORT (0x1L << ATOM_DEVICE_DFP2I_INDEX) + +#define ATOM_S0_DFP1I ATOM_S0_DFP1 +#define ATOM_S0_DFP1X ATOM_S0_DFP2 + +#define ATOM_S0_DFP2I 0x00200000L +#define ATOM_S0_DFP2Ib2 0x20 + +#define ATOM_S2_DFP1I_DPMS_STATE ATOM_S2_DFP1_DPMS_STATE +#define ATOM_S2_DFP1X_DPMS_STATE ATOM_S2_DFP2_DPMS_STATE + +#define ATOM_S2_DFP2I_DPMS_STATE 0x02000000L +#define ATOM_S2_DFP2I_DPMS_STATEb3 0x02 + +#define ATOM_S3_DFP2I_ACTIVEb1 0x02 + +#define ATOM_S3_DFP1I_ACTIVE ATOM_S3_DFP1_ACTIVE +#define ATOM_S3_DFP1X_ACTIVE ATOM_S3_DFP2_ACTIVE + +#define ATOM_S3_DFP2I_ACTIVE 0x00000200L + +#define ATOM_S3_DFP1I_CRTC_ACTIVE ATOM_S3_DFP1_CRTC_ACTIVE +#define ATOM_S3_DFP1X_CRTC_ACTIVE ATOM_S3_DFP2_CRTC_ACTIVE +#define ATOM_S3_DFP2I_CRTC_ACTIVE 0x02000000L + +#define ATOM_S3_DFP2I_CRTC_ACTIVEb3 0x02 +#define ATOM_S5_DOS_REQ_DFP2Ib1 0x02 + +#define ATOM_S5_DOS_REQ_DFP2I 0x0200 +#define ATOM_S6_ACC_REQ_DFP1I ATOM_S6_ACC_REQ_DFP1 +#define ATOM_S6_ACC_REQ_DFP1X ATOM_S6_ACC_REQ_DFP2 + +#define ATOM_S6_ACC_REQ_DFP2Ib3 0x02 +#define ATOM_S6_ACC_REQ_DFP2I 0x02000000L + +#define TMDS1XEncoderControl DVOEncoderControl +#define DFP1XOutputControl DVOOutputControl + +#define ExternalDFPOutputControl DFP1XOutputControl +#define EnableExternalTMDS_Encoder TMDS1XEncoderControl + +#define DFP1IOutputControl TMDSAOutputControl +#define DFP2IOutputControl LVTMAOutputControl + +#define DAC1_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS +#define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION + +#define DAC2_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS +#define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION + +#define ucDac1Standard ucDacStandard +#define ucDac2Standard ucDacStandard + +#define TMDS1EncoderControl TMDSAEncoderControl +#define TMDS2EncoderControl LVTMAEncoderControl + +#define DFP1OutputControl TMDSAOutputControl +#define DFP2OutputControl LVTMAOutputControl +#define CRT1OutputControl DAC1OutputControl +#define CRT2OutputControl DAC2OutputControl + +//These two lines will be removed for sure in a few days, will follow up with Michael V. +#define EnableLVDS_SS EnableSpreadSpectrumOnPPLL +#define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL + +//#define ATOM_S2_CRT1_DPMS_STATE 0x00010000L +//#define ATOM_S2_LCD1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE +//#define ATOM_S2_TV1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE +//#define ATOM_S2_DFP1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE +//#define ATOM_S2_CRT2_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE + +#define ATOM_S6_ACC_REQ_TV2 0x00400000L +#define ATOM_DEVICE_TV2_INDEX 0x00000006 +#define ATOM_DEVICE_TV2_SUPPORT (0x1L << ATOM_DEVICE_TV2_INDEX) +#define ATOM_S0_TV2 0x00100000L +#define ATOM_S3_TV2_ACTIVE ATOM_S3_DFP6_ACTIVE +#define ATOM_S3_TV2_CRTC_ACTIVE ATOM_S3_DFP6_CRTC_ACTIVE + +// +#define ATOM_S2_CRT1_DPMS_STATE 0x00010000L +#define ATOM_S2_LCD1_DPMS_STATE 0x00020000L +#define ATOM_S2_TV1_DPMS_STATE 0x00040000L +#define ATOM_S2_DFP1_DPMS_STATE 0x00080000L +#define ATOM_S2_CRT2_DPMS_STATE 0x00100000L +#define ATOM_S2_LCD2_DPMS_STATE 0x00200000L +#define ATOM_S2_TV2_DPMS_STATE 0x00400000L +#define ATOM_S2_DFP2_DPMS_STATE 0x00800000L +#define ATOM_S2_CV_DPMS_STATE 0x01000000L +#define ATOM_S2_DFP3_DPMS_STATE 0x02000000L +#define ATOM_S2_DFP4_DPMS_STATE 0x04000000L +#define ATOM_S2_DFP5_DPMS_STATE 0x08000000L + +#define ATOM_S2_CRT1_DPMS_STATEb2 0x01 +#define ATOM_S2_LCD1_DPMS_STATEb2 0x02 +#define ATOM_S2_TV1_DPMS_STATEb2 0x04 +#define ATOM_S2_DFP1_DPMS_STATEb2 0x08 +#define ATOM_S2_CRT2_DPMS_STATEb2 0x10 +#define ATOM_S2_LCD2_DPMS_STATEb2 0x20 +#define ATOM_S2_TV2_DPMS_STATEb2 0x40 +#define ATOM_S2_DFP2_DPMS_STATEb2 0x80 +#define ATOM_S2_CV_DPMS_STATEb3 0x01 +#define ATOM_S2_DFP3_DPMS_STATEb3 0x02 +#define ATOM_S2_DFP4_DPMS_STATEb3 0x04 +#define ATOM_S2_DFP5_DPMS_STATEb3 0x08 + +#define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3 0x20 +#define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40 +#define ATOM_S3_RQST_GPU_USE_MIN_PWRb3 0x80 + +/*********************************************************************************/ + +#pragma pack() // BIOS data must use byte alignment + +// +// AMD ACPI Table +// +#pragma pack(1) + +typedef struct { + ULONG Signature; + ULONG TableLength; //Length + UCHAR Revision; + UCHAR Checksum; + UCHAR OemId[6]; + UCHAR OemTableId[8]; //UINT64 OemTableId; + ULONG OemRevision; + ULONG CreatorId; + ULONG CreatorRevision; +} AMD_ACPI_DESCRIPTION_HEADER; +/* +//EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h +typedef struct { + UINT32 Signature; //0x0 + UINT32 Length; //0x4 + UINT8 Revision; //0x8 + UINT8 Checksum; //0x9 + UINT8 OemId[6]; //0xA + UINT64 OemTableId; //0x10 + UINT32 OemRevision; //0x18 + UINT32 CreatorId; //0x1C + UINT32 CreatorRevision; //0x20 +}EFI_ACPI_DESCRIPTION_HEADER; +*/ +typedef struct { + AMD_ACPI_DESCRIPTION_HEADER SHeader; + UCHAR TableUUID[16]; //0x24 + ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the structure. + ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the structure. + ULONG Reserved[4]; //0x3C +}UEFI_ACPI_VFCT; + +typedef struct { + ULONG PCIBus; //0x4C + ULONG PCIDevice; //0x50 + ULONG PCIFunction; //0x54 + USHORT VendorID; //0x58 + USHORT DeviceID; //0x5A + USHORT SSVID; //0x5C + USHORT SSID; //0x5E + ULONG Revision; //0x60 + ULONG ImageLength; //0x64 +}VFCT_IMAGE_HEADER; + + +typedef struct { + VFCT_IMAGE_HEADER VbiosHeader; + UCHAR VbiosContent[1]; +}GOP_VBIOS_CONTENT; + +typedef struct { + VFCT_IMAGE_HEADER Lib1Header; + UCHAR Lib1Content[1]; +}GOP_LIB1_CONTENT; + +#pragma pack() + + +#endif /* _ATOMBIOS_H */ + +#include "pptable.h" + |