diff options
Diffstat (limited to 'drivers/mfd/stm32-timers.c')
| -rw-r--r-- | drivers/mfd/stm32-timers.c | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/drivers/mfd/stm32-timers.c b/drivers/mfd/stm32-timers.c new file mode 100644 index 000000000..44ed2fce0 --- /dev/null +++ b/drivers/mfd/stm32-timers.c @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) STMicroelectronics 2016 + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> + */ + +#include <linux/bitfield.h> +#include <linux/mfd/stm32-timers.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/reset.h> + +#define STM32_TIMERS_MAX_REGISTERS 0x3fc + +/* DIER register DMA enable bits */ +static const u32 stm32_timers_dier_dmaen[STM32_TIMERS_MAX_DMAS] = { + TIM_DIER_CC1DE, + TIM_DIER_CC2DE, + TIM_DIER_CC3DE, + TIM_DIER_CC4DE, + TIM_DIER_UIE, + TIM_DIER_TDE, + TIM_DIER_COMDE +}; + +static void stm32_timers_dma_done(void *p) +{ + struct stm32_timers_dma *dma = p; + struct dma_tx_state state; + enum dma_status status; + + status = dmaengine_tx_status(dma->chan, dma->chan->cookie, &state); + if (status == DMA_COMPLETE) + complete(&dma->completion); +} + +/** + * stm32_timers_dma_burst_read - Read from timers registers using DMA. + * + * Read from STM32 timers registers using DMA on a single event. + * @dev: reference to stm32_timers MFD device + * @buf: DMA'able destination buffer + * @id: stm32_timers_dmas event identifier (ch[1..4], up, trig or com) + * @reg: registers start offset for DMA to read from (like CCRx for capture) + * @num_reg: number of registers to read upon each DMA request, starting @reg. + * @bursts: number of bursts to read (e.g. like two for pwm period capture) + * @tmo_ms: timeout (milliseconds) + */ +int stm32_timers_dma_burst_read(struct device *dev, u32 *buf, + enum stm32_timers_dmas id, u32 reg, + unsigned int num_reg, unsigned int bursts, + unsigned long tmo_ms) +{ + struct stm32_timers *ddata = dev_get_drvdata(dev); + unsigned long timeout = msecs_to_jiffies(tmo_ms); + struct regmap *regmap = ddata->regmap; + struct stm32_timers_dma *dma = &ddata->dma; + size_t len = num_reg * bursts * sizeof(u32); + struct dma_async_tx_descriptor *desc; + struct dma_slave_config config; + dma_cookie_t cookie; + dma_addr_t dma_buf; + u32 dbl, dba; + long err; + int ret; + + /* Sanity check */ + if (id < STM32_TIMERS_DMA_CH1 || id >= STM32_TIMERS_MAX_DMAS) + return -EINVAL; + + if (!num_reg || !bursts || reg > STM32_TIMERS_MAX_REGISTERS || + (reg + num_reg * sizeof(u32)) > STM32_TIMERS_MAX_REGISTERS) + return -EINVAL; + + if (!dma->chans[id]) + return -ENODEV; + mutex_lock(&dma->lock); + + /* Select DMA channel in use */ + dma->chan = dma->chans[id]; + dma_buf = dma_map_single(dev, buf, len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, dma_buf)) { + ret = -ENOMEM; + goto unlock; + } + + /* Prepare DMA read from timer registers, using DMA burst mode */ + memset(&config, 0, sizeof(config)); + config.src_addr = (dma_addr_t)dma->phys_base + TIM_DMAR; + config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + ret = dmaengine_slave_config(dma->chan, &config); + if (ret) + goto unmap; + + desc = dmaengine_prep_slave_single(dma->chan, dma_buf, len, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (!desc) { + ret = -EBUSY; + goto unmap; + } + + desc->callback = stm32_timers_dma_done; + desc->callback_param = dma; + cookie = dmaengine_submit(desc); + ret = dma_submit_error(cookie); + if (ret) + goto dma_term; + + reinit_completion(&dma->completion); + dma_async_issue_pending(dma->chan); + + /* Setup and enable timer DMA burst mode */ + dbl = FIELD_PREP(TIM_DCR_DBL, bursts - 1); + dba = FIELD_PREP(TIM_DCR_DBA, reg >> 2); + ret = regmap_write(regmap, TIM_DCR, dbl | dba); + if (ret) + goto dma_term; + + /* Clear pending flags before enabling DMA request */ + ret = regmap_write(regmap, TIM_SR, 0); + if (ret) + goto dcr_clr; + + ret = regmap_update_bits(regmap, TIM_DIER, stm32_timers_dier_dmaen[id], + stm32_timers_dier_dmaen[id]); + if (ret) + goto dcr_clr; + + err = wait_for_completion_interruptible_timeout(&dma->completion, + timeout); + if (err == 0) + ret = -ETIMEDOUT; + else if (err < 0) + ret = err; + + regmap_update_bits(regmap, TIM_DIER, stm32_timers_dier_dmaen[id], 0); + regmap_write(regmap, TIM_SR, 0); +dcr_clr: + regmap_write(regmap, TIM_DCR, 0); +dma_term: + dmaengine_terminate_all(dma->chan); +unmap: + dma_unmap_single(dev, dma_buf, len, DMA_FROM_DEVICE); +unlock: + dma->chan = NULL; + mutex_unlock(&dma->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stm32_timers_dma_burst_read); + +static const struct regmap_config stm32_timers_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = sizeof(u32), + .max_register = STM32_TIMERS_MAX_REGISTERS, +}; + +static void stm32_timers_get_arr_size(struct stm32_timers *ddata) +{ + u32 arr; + + /* Backup ARR to restore it after getting the maximum value */ + regmap_read(ddata->regmap, TIM_ARR, &arr); + + /* + * Only the available bits will be written so when readback + * we get the maximum value of auto reload register + */ + regmap_write(ddata->regmap, TIM_ARR, ~0L); + regmap_read(ddata->regmap, TIM_ARR, &ddata->max_arr); + regmap_write(ddata->regmap, TIM_ARR, arr); +} + +static int stm32_timers_dma_probe(struct device *dev, + struct stm32_timers *ddata) +{ + int i; + int ret = 0; + char name[4]; + + init_completion(&ddata->dma.completion); + mutex_init(&ddata->dma.lock); + + /* Optional DMA support: get valid DMA channel(s) or NULL */ + for (i = STM32_TIMERS_DMA_CH1; i <= STM32_TIMERS_DMA_CH4; i++) { + snprintf(name, ARRAY_SIZE(name), "ch%1d", i + 1); + ddata->dma.chans[i] = dma_request_chan(dev, name); + } + ddata->dma.chans[STM32_TIMERS_DMA_UP] = dma_request_chan(dev, "up"); + ddata->dma.chans[STM32_TIMERS_DMA_TRIG] = dma_request_chan(dev, "trig"); + ddata->dma.chans[STM32_TIMERS_DMA_COM] = dma_request_chan(dev, "com"); + + for (i = STM32_TIMERS_DMA_CH1; i < STM32_TIMERS_MAX_DMAS; i++) { + if (IS_ERR(ddata->dma.chans[i])) { + /* Save the first error code to return */ + if (PTR_ERR(ddata->dma.chans[i]) != -ENODEV && !ret) + ret = PTR_ERR(ddata->dma.chans[i]); + + ddata->dma.chans[i] = NULL; + } + } + + return ret; +} + +static void stm32_timers_dma_remove(struct device *dev, + struct stm32_timers *ddata) +{ + int i; + + for (i = STM32_TIMERS_DMA_CH1; i < STM32_TIMERS_MAX_DMAS; i++) + if (ddata->dma.chans[i]) + dma_release_channel(ddata->dma.chans[i]); +} + +static int stm32_timers_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct stm32_timers *ddata; + struct resource *res; + void __iomem *mmio; + int ret; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(mmio)) + return PTR_ERR(mmio); + + /* Timer physical addr for DMA */ + ddata->dma.phys_base = res->start; + + ddata->regmap = devm_regmap_init_mmio_clk(dev, "int", mmio, + &stm32_timers_regmap_cfg); + if (IS_ERR(ddata->regmap)) + return PTR_ERR(ddata->regmap); + + ddata->clk = devm_clk_get(dev, NULL); + if (IS_ERR(ddata->clk)) + return PTR_ERR(ddata->clk); + + stm32_timers_get_arr_size(ddata); + + ret = stm32_timers_dma_probe(dev, ddata); + if (ret) { + stm32_timers_dma_remove(dev, ddata); + return ret; + } + + platform_set_drvdata(pdev, ddata); + + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); + if (ret) + stm32_timers_dma_remove(dev, ddata); + + return ret; +} + +static int stm32_timers_remove(struct platform_device *pdev) +{ + struct stm32_timers *ddata = platform_get_drvdata(pdev); + + /* + * Don't use devm_ here: enfore of_platform_depopulate() happens before + * DMA are released, to avoid race on DMA. + */ + of_platform_depopulate(&pdev->dev); + stm32_timers_dma_remove(&pdev->dev, ddata); + + return 0; +} + +static const struct of_device_id stm32_timers_of_match[] = { + { .compatible = "st,stm32-timers", }, + { /* end node */ }, +}; +MODULE_DEVICE_TABLE(of, stm32_timers_of_match); + +static struct platform_driver stm32_timers_driver = { + .probe = stm32_timers_probe, + .remove = stm32_timers_remove, + .driver = { + .name = "stm32-timers", + .of_match_table = stm32_timers_of_match, + }, +}; +module_platform_driver(stm32_timers_driver); + +MODULE_DESCRIPTION("STMicroelectronics STM32 Timers"); +MODULE_LICENSE("GPL v2"); |