diff options
Diffstat (limited to 'drivers/misc/habanalabs/include/common/hl_boot_if.h')
| -rw-r--r-- | drivers/misc/habanalabs/include/common/hl_boot_if.h | 702 |
1 files changed, 702 insertions, 0 deletions
diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h new file mode 100644 index 000000000..e0ea51cc7 --- /dev/null +++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h @@ -0,0 +1,702 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright 2018-2020 HabanaLabs, Ltd. + * All Rights Reserved. + * + */ + +#ifndef HL_BOOT_IF_H +#define HL_BOOT_IF_H + +#define LKD_HARD_RESET_MAGIC 0xED7BD694 /* deprecated - do not use */ +#define HL_POWER9_HOST_MAGIC 0x1DA30009 + +#define BOOT_FIT_SRAM_OFFSET 0x200000 + +#define VERSION_MAX_LEN 128 + +enum cpu_boot_err { + CPU_BOOT_ERR_DRAM_INIT_FAIL = 0, + CPU_BOOT_ERR_FIT_CORRUPTED = 1, + CPU_BOOT_ERR_TS_INIT_FAIL = 2, + CPU_BOOT_ERR_DRAM_SKIPPED = 3, + CPU_BOOT_ERR_BMC_WAIT_SKIPPED = 4, + CPU_BOOT_ERR_NIC_DATA_NOT_RDY = 5, + CPU_BOOT_ERR_NIC_FW_FAIL = 6, + CPU_BOOT_ERR_SECURITY_NOT_RDY = 7, + CPU_BOOT_ERR_SECURITY_FAIL = 8, + CPU_BOOT_ERR_EFUSE_FAIL = 9, + CPU_BOOT_ERR_PRI_IMG_VER_FAIL = 10, + CPU_BOOT_ERR_SEC_IMG_VER_FAIL = 11, + CPU_BOOT_ERR_PLL_FAIL = 12, + CPU_BOOT_ERR_DEVICE_UNUSABLE_FAIL = 13, + CPU_BOOT_ERR_BOOT_FW_CRIT_ERR = 18, + CPU_BOOT_ERR_BINNING_FAIL = 19, + CPU_BOOT_ERR_TPM_FAIL = 20, + CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL = 21, + CPU_BOOT_ERR_EEPROM_FAIL = 22, + CPU_BOOT_ERR_ENABLED = 31, + CPU_BOOT_ERR_SCND_EN = 63, + CPU_BOOT_ERR_LAST = 64 /* we have 2 registers of 32 bits */ +}; + +/* + * CPU error bits in BOOT_ERROR registers + * + * CPU_BOOT_ERR0_DRAM_INIT_FAIL DRAM initialization failed. + * DRAM is not reliable to use. + * + * CPU_BOOT_ERR0_FIT_CORRUPTED FIT data integrity verification of the + * image provided by the host has failed. + * + * CPU_BOOT_ERR0_TS_INIT_FAIL Thermal Sensor initialization failed. + * Boot continues as usual, but keep in + * mind this is a warning. + * + * CPU_BOOT_ERR0_DRAM_SKIPPED DRAM initialization has been skipped. + * Skipping DRAM initialization has been + * requested (e.g. strap, command, etc.) + * and FW skipped the DRAM initialization. + * Host can initialize the DRAM. + * + * CPU_BOOT_ERR0_BMC_WAIT_SKIPPED Waiting for BMC data will be skipped. + * Meaning the BMC data might not be + * available until reset. + * + * CPU_BOOT_ERR0_NIC_DATA_NOT_RDY NIC data from BMC is not ready. + * BMC has not provided the NIC data yet. + * Once provided this bit will be cleared. + * + * CPU_BOOT_ERR0_NIC_FW_FAIL NIC FW loading failed. + * The NIC FW loading and initialization + * failed. This means NICs are not usable. + * + * CPU_BOOT_ERR0_SECURITY_NOT_RDY Chip security initialization has been + * started, but is not ready yet - chip + * cannot be accessed. + * + * CPU_BOOT_ERR0_SECURITY_FAIL Security related tasks have failed. + * The tasks are security init (root of + * trust), boot authentication (chain of + * trust), data packets authentication. + * + * CPU_BOOT_ERR0_EFUSE_FAIL Reading from eFuse failed. + * The PCI device ID might be wrong. + * + * CPU_BOOT_ERR0_PRI_IMG_VER_FAIL Verification of primary image failed. + * It mean that ppboot checksum + * verification for the preboot primary + * image has failed to match expected + * checksum. Trying to program image again + * might solve this. + * + * CPU_BOOT_ERR0_SEC_IMG_VER_FAIL Verification of secondary image failed. + * It mean that ppboot checksum + * verification for the preboot secondary + * image has failed to match expected + * checksum. Trying to program image again + * might solve this. + * + * CPU_BOOT_ERR0_PLL_FAIL PLL settings failed, meaning that one + * of the PLLs remains in REF_CLK + * + * CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL Device is unusable and customer support + * should be contacted. + * + * CPU_BOOT_ERR0_BOOT_FW_CRIT_ERR Critical error was detected during + * the execution of ppboot or preboot. + * for example: stack overflow. + * + * CPU_BOOT_ERR0_BINNING_FAIL Binning settings failed, meaning + * malfunctioning components might still be + * in use. + * + * CPU_BOOT_ERR0_TPM_FAIL TPM verification flow failed. + * + * CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL Failed to set threshold for tmperature + * sensor. + * + * CPU_BOOT_ERR_EEPROM_FAIL Failed reading EEPROM data. Defaults + * are used. + * + * CPU_BOOT_ERR0_ENABLED Error registers enabled. + * This is a main indication that the + * running FW populates the error + * registers. Meaning the error bits are + * not garbage, but actual error statuses. + */ +#define CPU_BOOT_ERR0_DRAM_INIT_FAIL (1 << CPU_BOOT_ERR_DRAM_INIT_FAIL) +#define CPU_BOOT_ERR0_FIT_CORRUPTED (1 << CPU_BOOT_ERR_FIT_CORRUPTED) +#define CPU_BOOT_ERR0_TS_INIT_FAIL (1 << CPU_BOOT_ERR_TS_INIT_FAIL) +#define CPU_BOOT_ERR0_DRAM_SKIPPED (1 << CPU_BOOT_ERR_DRAM_SKIPPED) +#define CPU_BOOT_ERR0_BMC_WAIT_SKIPPED (1 << CPU_BOOT_ERR_BMC_WAIT_SKIPPED) +#define CPU_BOOT_ERR0_NIC_DATA_NOT_RDY (1 << CPU_BOOT_ERR_NIC_DATA_NOT_RDY) +#define CPU_BOOT_ERR0_NIC_FW_FAIL (1 << CPU_BOOT_ERR_NIC_FW_FAIL) +#define CPU_BOOT_ERR0_SECURITY_NOT_RDY (1 << CPU_BOOT_ERR_SECURITY_NOT_RDY) +#define CPU_BOOT_ERR0_SECURITY_FAIL (1 << CPU_BOOT_ERR_SECURITY_FAIL) +#define CPU_BOOT_ERR0_EFUSE_FAIL (1 << CPU_BOOT_ERR_EFUSE_FAIL) +#define CPU_BOOT_ERR0_PRI_IMG_VER_FAIL (1 << CPU_BOOT_ERR_PRI_IMG_VER_FAIL) +#define CPU_BOOT_ERR0_SEC_IMG_VER_FAIL (1 << CPU_BOOT_ERR_SEC_IMG_VER_FAIL) +#define CPU_BOOT_ERR0_PLL_FAIL (1 << CPU_BOOT_ERR_PLL_FAIL) +#define CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL (1 << CPU_BOOT_ERR_DEVICE_UNUSABLE_FAIL) +#define CPU_BOOT_ERR0_BOOT_FW_CRIT_ERR (1 << CPU_BOOT_ERR_BOOT_FW_CRIT_ERR) +#define CPU_BOOT_ERR0_BINNING_FAIL (1 << CPU_BOOT_ERR_BINNING_FAIL) +#define CPU_BOOT_ERR0_TPM_FAIL (1 << CPU_BOOT_ERR_TPM_FAIL) +#define CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL (1 << CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL) +#define CPU_BOOT_ERR0_EEPROM_FAIL (1 << CPU_BOOT_ERR_EEPROM_FAIL) +#define CPU_BOOT_ERR0_ENABLED (1 << CPU_BOOT_ERR_ENABLED) +#define CPU_BOOT_ERR1_ENABLED (1 << CPU_BOOT_ERR_ENABLED) + +enum cpu_boot_dev_sts { + CPU_BOOT_DEV_STS_SECURITY_EN = 0, + CPU_BOOT_DEV_STS_DEBUG_EN = 1, + CPU_BOOT_DEV_STS_WATCHDOG_EN = 2, + CPU_BOOT_DEV_STS_DRAM_INIT_EN = 3, + CPU_BOOT_DEV_STS_BMC_WAIT_EN = 4, + CPU_BOOT_DEV_STS_E2E_CRED_EN = 5, + CPU_BOOT_DEV_STS_HBM_CRED_EN = 6, + CPU_BOOT_DEV_STS_RL_EN = 7, + CPU_BOOT_DEV_STS_SRAM_SCR_EN = 8, + CPU_BOOT_DEV_STS_DRAM_SCR_EN = 9, + CPU_BOOT_DEV_STS_FW_HARD_RST_EN = 10, + CPU_BOOT_DEV_STS_PLL_INFO_EN = 11, + CPU_BOOT_DEV_STS_SP_SRAM_EN = 12, + CPU_BOOT_DEV_STS_CLK_GATE_EN = 13, + CPU_BOOT_DEV_STS_HBM_ECC_EN = 14, + CPU_BOOT_DEV_STS_PKT_PI_ACK_EN = 15, + CPU_BOOT_DEV_STS_FW_LD_COM_EN = 16, + CPU_BOOT_DEV_STS_FW_IATU_CONF_EN = 17, + CPU_BOOT_DEV_STS_FW_NIC_MAC_EN = 18, + CPU_BOOT_DEV_STS_DYN_PLL_EN = 19, + CPU_BOOT_DEV_STS_GIC_PRIVILEGED_EN = 20, + CPU_BOOT_DEV_STS_EQ_INDEX_EN = 21, + CPU_BOOT_DEV_STS_MULTI_IRQ_POLL_EN = 22, + CPU_BOOT_DEV_STS_FW_NIC_STAT_XPCS91_EN = 23, + CPU_BOOT_DEV_STS_FW_NIC_STAT_EXT_EN = 24, + CPU_BOOT_DEV_STS_IS_IDLE_CHECK_EN = 25, + CPU_BOOT_DEV_STS_MAP_HWMON_EN = 26, + CPU_BOOT_DEV_STS_ENABLED = 31, + CPU_BOOT_DEV_STS_SCND_EN = 63, + CPU_BOOT_DEV_STS_LAST = 64 /* we have 2 registers of 32 bits */ +}; + +/* + * BOOT DEVICE STATUS bits in BOOT_DEVICE_STS registers + * + * CPU_BOOT_DEV_STS0_SECURITY_EN Security is Enabled. + * This is an indication for security + * enabled in FW, which means that + * all conditions for security are met: + * device is indicated as security enabled, + * registers are protected, and device + * uses keys for image verification. + * Initialized in: preboot + * + * CPU_BOOT_DEV_STS0_DEBUG_EN Debug is enabled. + * Enabled when JTAG or DEBUG is enabled + * in FW. + * Initialized in: preboot + * + * CPU_BOOT_DEV_STS0_WATCHDOG_EN Watchdog is enabled. + * Watchdog is enabled in FW. + * Initialized in: preboot + * + * CPU_BOOT_DEV_STS0_DRAM_INIT_EN DRAM initialization is enabled. + * DRAM initialization has been done in FW. + * Initialized in: u-boot + * + * CPU_BOOT_DEV_STS0_BMC_WAIT_EN Waiting for BMC data enabled. + * If set, it means that during boot, + * FW waited for BMC data. + * Initialized in: u-boot + * + * CPU_BOOT_DEV_STS0_E2E_CRED_EN E2E credits initialized. + * FW initialized E2E credits. + * Initialized in: u-boot + * + * CPU_BOOT_DEV_STS0_HBM_CRED_EN HBM credits initialized. + * FW initialized HBM credits. + * Initialized in: u-boot + * + * CPU_BOOT_DEV_STS0_RL_EN Rate limiter initialized. + * FW initialized rate limiter. + * Initialized in: u-boot + * + * CPU_BOOT_DEV_STS0_SRAM_SCR_EN SRAM scrambler enabled. + * FW initialized SRAM scrambler. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_DRAM_SCR_EN DRAM scrambler enabled. + * FW initialized DRAM scrambler. + * Initialized in: u-boot + * + * CPU_BOOT_DEV_STS0_FW_HARD_RST_EN FW hard reset procedure is enabled. + * FW has the hard reset procedure + * implemented. This means that FW will + * perform hard reset procedure on + * receiving the halt-machine event. + * Initialized in: preboot, u-boot, linux + * + * CPU_BOOT_DEV_STS0_PLL_INFO_EN FW retrieval of PLL info is enabled. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_SP_SRAM_EN SP SRAM is initialized and available + * for use. + * Initialized in: preboot + * + * CPU_BOOT_DEV_STS0_CLK_GATE_EN Clock Gating enabled. + * FW initialized Clock Gating. + * Initialized in: preboot + * + * CPU_BOOT_DEV_STS0_HBM_ECC_EN HBM ECC handling Enabled. + * FW handles HBM ECC indications. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN Packets ack value used in the armcpd + * is set to the PI counter. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_FW_LD_COM_EN Flexible FW loading communication + * protocol is enabled. + * Initialized in: preboot + * + * CPU_BOOT_DEV_STS0_FW_IATU_CONF_EN FW iATU configuration is enabled. + * This bit if set, means the iATU has been + * configured and is ready for use. + * Initialized in: ppboot + * + * CPU_BOOT_DEV_STS0_FW_NIC_MAC_EN NIC MAC channels init is done by FW and + * any access to them is done via the FW. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_DYN_PLL_EN Dynamic PLL configuration is enabled. + * FW sends to host a bitmap of supported + * PLLs. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_GIC_PRIVILEGED_EN GIC access permission only from + * previleged entity. FW sets this status + * bit for host. If this bit is set then + * GIC can not be accessed from host. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_EQ_INDEX_EN Event Queue (EQ) index is a running + * index for each new event sent to host. + * This is used as a method in host to + * identify that the waiting event in + * queue is actually a new event which + * was not served before. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN Use multiple scratchpad interfaces to + * prevent IRQs overriding each other. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_FW_NIC_STAT_XPCS91_EN + * NIC STAT and XPCS91 access is restricted + * and is done via FW only. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_FW_NIC_STAT_EXT_EN + * NIC STAT get all is supported. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_IS_IDLE_CHECK_EN + * F/W checks if the device is idle by reading defined set + * of registers. It returns a bitmask of all the engines, + * where a bit is set if the engine is not idle. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_MAP_HWMON_EN + * If set, means f/w supports proprietary + * HWMON enum mapping to cpucp enums. + * Initialized in: linux + * + * CPU_BOOT_DEV_STS0_ENABLED Device status register enabled. + * This is a main indication that the + * running FW populates the device status + * register. Meaning the device status + * bits are not garbage, but actual + * statuses. + * Initialized in: preboot + * + */ +#define CPU_BOOT_DEV_STS0_SECURITY_EN (1 << CPU_BOOT_DEV_STS_SECURITY_EN) +#define CPU_BOOT_DEV_STS0_DEBUG_EN (1 << CPU_BOOT_DEV_STS_DEBUG_EN) +#define CPU_BOOT_DEV_STS0_WATCHDOG_EN (1 << CPU_BOOT_DEV_STS_WATCHDOG_EN) +#define CPU_BOOT_DEV_STS0_DRAM_INIT_EN (1 << CPU_BOOT_DEV_STS_DRAM_INIT_EN) +#define CPU_BOOT_DEV_STS0_BMC_WAIT_EN (1 << CPU_BOOT_DEV_STS_BMC_WAIT_EN) +#define CPU_BOOT_DEV_STS0_E2E_CRED_EN (1 << CPU_BOOT_DEV_STS_E2E_CRED_EN) +#define CPU_BOOT_DEV_STS0_HBM_CRED_EN (1 << CPU_BOOT_DEV_STS_HBM_CRED_EN) +#define CPU_BOOT_DEV_STS0_RL_EN (1 << CPU_BOOT_DEV_STS_RL_EN) +#define CPU_BOOT_DEV_STS0_SRAM_SCR_EN (1 << CPU_BOOT_DEV_STS_SRAM_SCR_EN) +#define CPU_BOOT_DEV_STS0_DRAM_SCR_EN (1 << CPU_BOOT_DEV_STS_DRAM_SCR_EN) +#define CPU_BOOT_DEV_STS0_FW_HARD_RST_EN (1 << CPU_BOOT_DEV_STS_FW_HARD_RST_EN) +#define CPU_BOOT_DEV_STS0_PLL_INFO_EN (1 << CPU_BOOT_DEV_STS_PLL_INFO_EN) +#define CPU_BOOT_DEV_STS0_SP_SRAM_EN (1 << CPU_BOOT_DEV_STS_SP_SRAM_EN) +#define CPU_BOOT_DEV_STS0_CLK_GATE_EN (1 << CPU_BOOT_DEV_STS_CLK_GATE_EN) +#define CPU_BOOT_DEV_STS0_HBM_ECC_EN (1 << CPU_BOOT_DEV_STS_HBM_ECC_EN) +#define CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN (1 << CPU_BOOT_DEV_STS_PKT_PI_ACK_EN) +#define CPU_BOOT_DEV_STS0_FW_LD_COM_EN (1 << CPU_BOOT_DEV_STS_FW_LD_COM_EN) +#define CPU_BOOT_DEV_STS0_FW_IATU_CONF_EN (1 << CPU_BOOT_DEV_STS_FW_IATU_CONF_EN) +#define CPU_BOOT_DEV_STS0_FW_NIC_MAC_EN (1 << CPU_BOOT_DEV_STS_FW_NIC_MAC_EN) +#define CPU_BOOT_DEV_STS0_DYN_PLL_EN (1 << CPU_BOOT_DEV_STS_DYN_PLL_EN) +#define CPU_BOOT_DEV_STS0_GIC_PRIVILEGED_EN (1 << CPU_BOOT_DEV_STS_GIC_PRIVILEGED_EN) +#define CPU_BOOT_DEV_STS0_EQ_INDEX_EN (1 << CPU_BOOT_DEV_STS_EQ_INDEX_EN) +#define CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN (1 << CPU_BOOT_DEV_STS_MULTI_IRQ_POLL_EN) +#define CPU_BOOT_DEV_STS0_FW_NIC_STAT_XPCS91_EN (1 << CPU_BOOT_DEV_STS_FW_NIC_STAT_XPCS91_EN) +#define CPU_BOOT_DEV_STS0_FW_NIC_STAT_EXT_EN (1 << CPU_BOOT_DEV_STS_FW_NIC_STAT_EXT_EN) +#define CPU_BOOT_DEV_STS0_IS_IDLE_CHECK_EN (1 << CPU_BOOT_DEV_STS_IS_IDLE_CHECK_EN) +#define CPU_BOOT_DEV_STS0_MAP_HWMON_EN (1 << CPU_BOOT_DEV_STS_MAP_HWMON_EN) +#define CPU_BOOT_DEV_STS0_ENABLED (1 << CPU_BOOT_DEV_STS_ENABLED) +#define CPU_BOOT_DEV_STS1_ENABLED (1 << CPU_BOOT_DEV_STS_ENABLED) + +enum cpu_boot_status { + CPU_BOOT_STATUS_NA = 0, /* Default value after reset of chip */ + CPU_BOOT_STATUS_IN_WFE = 1, + CPU_BOOT_STATUS_DRAM_RDY = 2, + CPU_BOOT_STATUS_SRAM_AVAIL = 3, + CPU_BOOT_STATUS_IN_BTL = 4, /* BTL is H/W FSM */ + CPU_BOOT_STATUS_IN_PREBOOT = 5, + CPU_BOOT_STATUS_IN_SPL, /* deprecated - not reported */ + CPU_BOOT_STATUS_IN_UBOOT = 7, + CPU_BOOT_STATUS_DRAM_INIT_FAIL, /* deprecated - will be removed */ + CPU_BOOT_STATUS_FIT_CORRUPTED, /* deprecated - will be removed */ + /* U-Boot console prompt activated, commands are not processed */ + CPU_BOOT_STATUS_UBOOT_NOT_READY = 10, + /* Finished NICs init, reported after DRAM and NICs */ + CPU_BOOT_STATUS_NIC_FW_RDY = 11, + CPU_BOOT_STATUS_TS_INIT_FAIL, /* deprecated - will be removed */ + CPU_BOOT_STATUS_DRAM_SKIPPED, /* deprecated - will be removed */ + CPU_BOOT_STATUS_BMC_WAITING_SKIPPED, /* deprecated - will be removed */ + /* Last boot loader progress status, ready to receive commands */ + CPU_BOOT_STATUS_READY_TO_BOOT = 15, + /* Internal Boot finished, ready for boot-fit */ + CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT = 16, + /* Internal Security has been initialized, device can be accessed */ + CPU_BOOT_STATUS_SECURITY_READY = 17, +}; + +enum kmd_msg { + KMD_MSG_NA = 0, + KMD_MSG_GOTO_WFE, + KMD_MSG_FIT_RDY, + KMD_MSG_SKIP_BMC, + RESERVED, + KMD_MSG_RST_DEV, + KMD_MSG_LAST +}; + +enum cpu_msg_status { + CPU_MSG_CLR = 0, + CPU_MSG_OK, + CPU_MSG_ERR, +}; + +/* communication registers mapping - consider ABI when changing */ +struct cpu_dyn_regs { + __le32 cpu_pq_base_addr_low; + __le32 cpu_pq_base_addr_high; + __le32 cpu_pq_length; + __le32 cpu_pq_init_status; + __le32 cpu_eq_base_addr_low; + __le32 cpu_eq_base_addr_high; + __le32 cpu_eq_length; + __le32 cpu_eq_ci; + __le32 cpu_cq_base_addr_low; + __le32 cpu_cq_base_addr_high; + __le32 cpu_cq_length; + __le32 cpu_pf_pq_pi; + __le32 cpu_boot_dev_sts0; + __le32 cpu_boot_dev_sts1; + __le32 cpu_boot_err0; + __le32 cpu_boot_err1; + __le32 cpu_boot_status; + __le32 fw_upd_sts; + __le32 fw_upd_cmd; + __le32 fw_upd_pending_sts; + __le32 fuse_ver_offset; + __le32 preboot_ver_offset; + __le32 uboot_ver_offset; + __le32 hw_state; + __le32 kmd_msg_to_cpu; + __le32 cpu_cmd_status_to_host; + __le32 gic_host_pi_upd_irq; + __le32 gic_tpc_qm_irq_ctrl; + __le32 gic_mme_qm_irq_ctrl; + __le32 gic_dma_qm_irq_ctrl; + __le32 gic_nic_qm_irq_ctrl; + __le32 gic_dma_core_irq_ctrl; + __le32 gic_host_halt_irq; + __le32 gic_host_ints_irq; + __le32 gic_host_soft_rst_irq; + __le32 gic_rot_qm_irq_ctrl; + __le32 cpu_rst_status; + __le32 eng_arc_irq_ctrl; + __le32 reserved1[20]; /* reserve for future use */ +}; + +/* TODO: remove the desc magic after the code is updated to use message */ +/* HCDM - Habana Communications Descriptor Magic */ +#define HL_COMMS_DESC_MAGIC 0x4843444D +#define HL_COMMS_DESC_VER 1 + +/* HCMv - Habana Communications Message + header version */ +#define HL_COMMS_MSG_MAGIC_VALUE 0x48434D00 +#define HL_COMMS_MSG_MAGIC_MASK 0xFFFFFF00 +#define HL_COMMS_MSG_MAGIC_VER_MASK 0xFF + +#define HL_COMMS_MSG_MAGIC_VER(ver) (HL_COMMS_MSG_MAGIC_VALUE | \ + ((ver) & HL_COMMS_MSG_MAGIC_VER_MASK)) +#define HL_COMMS_MSG_MAGIC_V0 HL_COMMS_DESC_MAGIC +#define HL_COMMS_MSG_MAGIC_V1 HL_COMMS_MSG_MAGIC_VER(1) + +#define HL_COMMS_MSG_MAGIC HL_COMMS_MSG_MAGIC_V1 + +#define HL_COMMS_MSG_MAGIC_VALIDATE_MAGIC(magic) \ + (((magic) & HL_COMMS_MSG_MAGIC_MASK) == \ + HL_COMMS_MSG_MAGIC_VALUE) + +#define HL_COMMS_MSG_MAGIC_VALIDATE_VERSION(magic, ver) \ + (((magic) & HL_COMMS_MSG_MAGIC_VER_MASK) >= \ + ((ver) & HL_COMMS_MSG_MAGIC_VER_MASK)) + +#define HL_COMMS_MSG_MAGIC_VALIDATE(magic, ver) \ + (HL_COMMS_MSG_MAGIC_VALIDATE_MAGIC((magic)) && \ + HL_COMMS_MSG_MAGIC_VALIDATE_VERSION((magic), (ver))) + +enum comms_msg_type { + HL_COMMS_DESC_TYPE = 0, + HL_COMMS_RESET_CAUSE_TYPE = 1, + HL_COMMS_FW_CFG_SKIP_TYPE = 2, + HL_COMMS_BINNING_CONF_TYPE = 3, +}; + +/* + * Binning information shared between LKD and FW + * @tpc_mask - TPC binning information + * @dec_mask - Decoder binning information + * @hbm_mask - HBM binning information + * @edma_mask - EDMA binning information + * @mme_mask_l - MME binning information lower 32 + * @mme_mask_h - MME binning information upper 32 + * @reserved - reserved field for 64 bit alignment + */ +struct lkd_fw_binning_info { + __le64 tpc_mask; + __le32 dec_mask; + __le32 hbm_mask; + __le32 edma_mask; + __le32 mme_mask_l; + __le32 mme_mask_h; + __le32 reserved; +}; + +/* TODO: remove this struct after the code is updated to use message */ +/* this is the comms descriptor header - meta data */ +struct comms_desc_header { + __le32 magic; /* magic for validation */ + __le32 crc32; /* CRC32 of the descriptor w/o header */ + __le16 size; /* size of the descriptor w/o header */ + __u8 version; /* descriptor version */ + __u8 reserved[5]; /* pad to 64 bit */ +}; + +/* this is the comms message header - meta data */ +struct comms_msg_header { + __le32 magic; /* magic for validation */ + __le32 crc32; /* CRC32 of the message w/o header */ + __le16 size; /* size of the message w/o header */ + __u8 version; /* message payload version */ + __u8 type; /* message type */ + __u8 reserved[4]; /* pad to 64 bit */ +}; + +/* this is the main FW descriptor - consider ABI when changing */ +struct lkd_fw_comms_desc { + struct comms_desc_header header; + struct cpu_dyn_regs cpu_dyn_regs; + char fuse_ver[VERSION_MAX_LEN]; + char cur_fw_ver[VERSION_MAX_LEN]; + /* can be used for 1 more version w/o ABI change */ + char reserved0[VERSION_MAX_LEN]; + __le64 img_addr; /* address for next FW component load */ +}; + +enum comms_reset_cause { + HL_RESET_CAUSE_UNKNOWN = 0, + HL_RESET_CAUSE_HEARTBEAT = 1, + HL_RESET_CAUSE_TDR = 2, +}; + +/* TODO: remove define after struct name is aligned on all projects */ +#define lkd_msg_comms lkd_fw_comms_msg + +/* this is the comms message descriptor */ +struct lkd_fw_comms_msg { + struct comms_msg_header header; + /* union for future expantions of new messages */ + union { + struct { + struct cpu_dyn_regs cpu_dyn_regs; + char fuse_ver[VERSION_MAX_LEN]; + char cur_fw_ver[VERSION_MAX_LEN]; + /* can be used for 1 more version w/o ABI change */ + char reserved0[VERSION_MAX_LEN]; + /* address for next FW component load */ + __le64 img_addr; + }; + struct { + __u8 reset_cause; + }; + struct { + __u8 fw_cfg_skip; /* 1 - skip, 0 - don't skip */ + }; + struct lkd_fw_binning_info binning_info; + }; +}; + +/* + * LKD commands: + * + * COMMS_NOOP Used to clear the command register and no actual + * command is send. + * + * COMMS_CLR_STS Clear status command - FW should clear the + * status register. Used for synchronization + * between the commands as part of the race free + * protocol. + * + * COMMS_RST_STATE Reset the current communication state which is + * kept by FW for proper responses. + * Should be used in the beginning of the + * communication cycle to clean any leftovers from + * previous communication attempts. + * + * COMMS_PREP_DESC Prepare descriptor for setting up the + * communication and other dynamic data: + * struct lkd_fw_comms_desc. + * This command has a parameter stating the next FW + * component size, so the FW can actually prepare a + * space for it and in the status response provide + * the descriptor offset. The Offset of the next FW + * data component is a part of the descriptor + * structure. + * + * COMMS_DATA_RDY The FW data has been uploaded and is ready for + * validation. + * + * COMMS_EXEC Execute the next FW component. + * + * COMMS_RST_DEV Reset the device. + * + * COMMS_GOTO_WFE Execute WFE command. Allowed only on non-secure + * devices. + * + * COMMS_SKIP_BMC Perform actions required for BMC-less servers. + * Do not wait for BMC response. + * + * COMMS_PREP_DESC_ELBI Same as COMMS_PREP_DESC only that the memory + * space is allocated in a ELBI access only + * address range. + * + */ +enum comms_cmd { + COMMS_NOOP = 0, + COMMS_CLR_STS = 1, + COMMS_RST_STATE = 2, + COMMS_PREP_DESC = 3, + COMMS_DATA_RDY = 4, + COMMS_EXEC = 5, + COMMS_RST_DEV = 6, + COMMS_GOTO_WFE = 7, + COMMS_SKIP_BMC = 8, + COMMS_PREP_DESC_ELBI = 10, + COMMS_INVLD_LAST +}; + +#define COMMS_COMMAND_SIZE_SHIFT 0 +#define COMMS_COMMAND_SIZE_MASK 0x1FFFFFF +#define COMMS_COMMAND_CMD_SHIFT 27 +#define COMMS_COMMAND_CMD_MASK 0xF8000000 + +/* + * LKD command to FW register structure + * @size - FW component size + * @cmd - command from enum comms_cmd + */ +struct comms_command { + union { /* bit fields are only for FW use */ + struct { + u32 size :25; /* 32MB max. */ + u32 reserved :2; + enum comms_cmd cmd :5; /* 32 commands */ + }; + __le32 val; + }; +}; + +/* + * FW status + * + * COMMS_STS_NOOP Used to clear the status register and no actual + * status is provided. + * + * COMMS_STS_ACK Command has been received and recognized. + * + * COMMS_STS_OK Command execution has finished successfully. + * + * COMMS_STS_ERR Command execution was unsuccessful and resulted + * in error. + * + * COMMS_STS_VALID_ERR FW validation has failed. + * + * COMMS_STS_TIMEOUT_ERR Command execution has timed out. + */ +enum comms_sts { + COMMS_STS_NOOP = 0, + COMMS_STS_ACK = 1, + COMMS_STS_OK = 2, + COMMS_STS_ERR = 3, + COMMS_STS_VALID_ERR = 4, + COMMS_STS_TIMEOUT_ERR = 5, + COMMS_STS_INVLD_LAST +}; + +/* RAM types for FW components loading - defines the base address */ +enum comms_ram_types { + COMMS_SRAM = 0, + COMMS_DRAM = 1, +}; + +#define COMMS_STATUS_OFFSET_SHIFT 0 +#define COMMS_STATUS_OFFSET_MASK 0x03FFFFFF +#define COMMS_STATUS_OFFSET_ALIGN_SHIFT 2 +#define COMMS_STATUS_RAM_TYPE_SHIFT 26 +#define COMMS_STATUS_RAM_TYPE_MASK 0x0C000000 +#define COMMS_STATUS_STATUS_SHIFT 28 +#define COMMS_STATUS_STATUS_MASK 0xF0000000 + +/* + * FW status to LKD register structure + * @offset - an offset from the base of the ram_type shifted right by + * 2 bits (always aligned to 32 bits). + * Allows a maximum addressable offset of 256MB from RAM base. + * Example: for real offset in RAM of 0x800000 (8MB), the value + * in offset field is (0x800000 >> 2) = 0x200000. + * @ram_type - the RAM type that should be used for offset from + * enum comms_ram_types + * @status - status from enum comms_sts + */ +struct comms_status { + union { /* bit fields are only for FW use */ + struct { + u32 offset :26; + enum comms_ram_types ram_type :2; + enum comms_sts status :4; /* 16 statuses */ + }; + __le32 val; + }; +}; + +#endif /* HL_BOOT_IF_H */ |