summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c105
1 files changed, 53 insertions, 52 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 123dca9ce..305afb823 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -102,7 +102,7 @@ s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
csum = ~csum;
do {
if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
- return IXGBE_ERR_SWFW_SYNC;
+ return -EBUSY;
ixgbe_i2c_start(hw);
/* Device Address and write indication */
if (ixgbe_out_i2c_byte_ack(hw, addr))
@@ -150,7 +150,7 @@ fail:
hw_dbg(hw, "I2C byte read combined error.\n");
} while (retry < max_retry);
- return IXGBE_ERR_I2C;
+ return -EIO;
}
/**
@@ -179,7 +179,7 @@ s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
csum = ~csum;
do {
if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
- return IXGBE_ERR_SWFW_SYNC;
+ return -EBUSY;
ixgbe_i2c_start(hw);
/* Device Address and write indication */
if (ixgbe_out_i2c_byte_ack(hw, addr))
@@ -215,7 +215,7 @@ fail:
hw_dbg(hw, "I2C byte write combined error.\n");
} while (retry < max_retry);
- return IXGBE_ERR_I2C;
+ return -EIO;
}
/**
@@ -262,8 +262,8 @@ static bool ixgbe_probe_phy(struct ixgbe_hw *hw, u16 phy_addr)
**/
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
{
+ u32 status = -EFAULT;
u32 phy_addr;
- u32 status = IXGBE_ERR_PHY_ADDR_INVALID;
if (!hw->phy.phy_semaphore_mask) {
if (hw->bus.lan_id)
@@ -282,7 +282,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
if (ixgbe_probe_phy(hw, phy_addr))
return 0;
else
- return IXGBE_ERR_PHY_ADDR_INVALID;
+ return -EFAULT;
}
for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
@@ -408,8 +408,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
return status;
/* Don't reset PHY if it's shut down due to overtemp. */
- if (!hw->phy.reset_if_overtemp &&
- (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
+ if (!hw->phy.reset_if_overtemp && hw->phy.ops.check_overtemp(hw))
return 0;
/* Blocked by MNG FW so bail */
@@ -457,7 +456,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
if (ctrl & MDIO_CTRL1_RESET) {
hw_dbg(hw, "PHY reset polling failed to complete.\n");
- return IXGBE_ERR_RESET_FAILED;
+ return -EIO;
}
return 0;
@@ -500,7 +499,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
hw_dbg(hw, "PHY address command did not complete.\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
/* Address cycle complete, setup and write the read
@@ -527,7 +526,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
hw_dbg(hw, "PHY read command didn't complete\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
/* Read operation is complete. Get the data
@@ -559,7 +558,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
phy_data);
hw->mac.ops.release_swfw_sync(hw, gssr);
} else {
- return IXGBE_ERR_SWFW_SYNC;
+ return -EBUSY;
}
return status;
@@ -604,7 +603,7 @@ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
hw_dbg(hw, "PHY address cmd didn't complete\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
/*
@@ -632,7 +631,7 @@ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
hw_dbg(hw, "PHY write cmd didn't complete\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
return 0;
@@ -657,7 +656,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
phy_data);
hw->mac.ops.release_swfw_sync(hw, gssr);
} else {
- return IXGBE_ERR_SWFW_SYNC;
+ return -EBUSY;
}
return status;
@@ -1303,7 +1302,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
if ((phy_data & MDIO_CTRL1_RESET) != 0) {
hw_dbg(hw, "PHY reset did not complete.\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
/* Get init offsets */
@@ -1360,12 +1359,12 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
hw_dbg(hw, "SOL\n");
} else {
hw_dbg(hw, "Bad control value\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
break;
default:
hw_dbg(hw, "Bad control type\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
}
@@ -1373,7 +1372,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
err_eeprom:
hw_err(hw, "eeprom read at offset %d failed\n", data_offset);
- return IXGBE_ERR_PHY;
+ return -EIO;
}
/**
@@ -1391,10 +1390,10 @@ s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
return ixgbe_identify_qsfp_module_generic(hw);
default:
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
- return IXGBE_ERR_SFP_NOT_PRESENT;
+ return -ENOENT;
}
- return IXGBE_ERR_SFP_NOT_PRESENT;
+ return -ENOENT;
}
/**
@@ -1419,7 +1418,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
- return IXGBE_ERR_SFP_NOT_PRESENT;
+ return -ENOENT;
}
/* LAN ID is needed for sfp_type determination */
@@ -1434,7 +1433,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
hw->phy.type = ixgbe_phy_sfp_unsupported;
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
}
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_1GBE_COMP_CODES,
@@ -1625,7 +1624,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
hw->phy.type = ixgbe_phy_sfp_unsupported;
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
}
/* Anything else 82598-based is supported */
@@ -1649,7 +1648,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
}
hw_dbg(hw, "SFP+ module not supported\n");
hw->phy.type = ixgbe_phy_sfp_unsupported;
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
}
return 0;
@@ -1659,7 +1658,7 @@ err_read_i2c_eeprom:
hw->phy.id = 0;
hw->phy.type = ixgbe_phy_unknown;
}
- return IXGBE_ERR_SFP_NOT_PRESENT;
+ return -ENOENT;
}
/**
@@ -1686,7 +1685,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
- return IXGBE_ERR_SFP_NOT_PRESENT;
+ return -ENOENT;
}
/* LAN ID is needed for sfp_type determination */
@@ -1700,7 +1699,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
hw->phy.type = ixgbe_phy_sfp_unsupported;
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
}
hw->phy.id = identifier;
@@ -1768,7 +1767,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
} else {
/* unsupported module type */
hw->phy.type = ixgbe_phy_sfp_unsupported;
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
}
}
@@ -1828,7 +1827,7 @@ static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
}
hw_dbg(hw, "QSFP module not supported\n");
hw->phy.type = ixgbe_phy_sfp_unsupported;
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
}
return 0;
}
@@ -1839,7 +1838,7 @@ err_read_i2c_eeprom:
hw->phy.id = 0;
hw->phy.type = ixgbe_phy_unknown;
- return IXGBE_ERR_SFP_NOT_PRESENT;
+ return -ENOENT;
}
/**
@@ -1859,14 +1858,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
u16 sfp_type = hw->phy.sfp_type;
if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
- return IXGBE_ERR_SFP_NOT_PRESENT;
+ return -ENOENT;
if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
(hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
/*
* Limiting active cables and 1G Phys must be initialized as
@@ -1887,11 +1886,11 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) {
hw_err(hw, "eeprom read at %d failed\n",
IXGBE_PHY_INIT_OFFSET_NL);
- return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+ return -EIO;
}
if ((!*list_offset) || (*list_offset == 0xFFFF))
- return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+ return -EIO;
/* Shift offset to first ID word */
(*list_offset)++;
@@ -1910,7 +1909,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
goto err_phy;
if ((!*data_offset) || (*data_offset == 0xFFFF)) {
hw_dbg(hw, "SFP+ module not supported\n");
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
} else {
break;
}
@@ -1923,14 +1922,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
if (sfp_id == IXGBE_PHY_INIT_END_NL) {
hw_dbg(hw, "No matching SFP+ module found\n");
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
}
return 0;
err_phy:
hw_err(hw, "eeprom read at offset %d failed\n", *list_offset);
- return IXGBE_ERR_PHY;
+ return -EIO;
}
/**
@@ -2025,7 +2024,7 @@ static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
do {
if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
- return IXGBE_ERR_SWFW_SYNC;
+ return -EBUSY;
ixgbe_i2c_start(hw);
@@ -2141,7 +2140,7 @@ static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
u32 swfw_mask = hw->phy.phy_semaphore_mask;
if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
- return IXGBE_ERR_SWFW_SYNC;
+ return -EBUSY;
do {
ixgbe_i2c_start(hw);
@@ -2383,7 +2382,7 @@ static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
if (ack == 1) {
hw_dbg(hw, "I2C ack was not received.\n");
- status = IXGBE_ERR_I2C;
+ status = -EIO;
}
ixgbe_lower_i2c_clk(hw, &i2cctl);
@@ -2455,7 +2454,7 @@ static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
udelay(IXGBE_I2C_T_LOW);
} else {
hw_dbg(hw, "I2C data was not set to %X\n", data);
- return IXGBE_ERR_I2C;
+ return -EIO;
}
return 0;
@@ -2551,7 +2550,7 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
*i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw));
if (data != ixgbe_get_i2c_data(hw, i2cctl)) {
hw_dbg(hw, "Error - I2C data was not set to %X.\n", data);
- return IXGBE_ERR_I2C;
+ return -EIO;
}
return 0;
@@ -2621,22 +2620,24 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
* @hw: pointer to hardware structure
*
* Checks if the LASI temp alarm status was triggered due to overtemp
+ *
+ * Return true when an overtemp event detected, otherwise false.
**/
-s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
+bool ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
{
u16 phy_data = 0;
+ u32 status;
if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM)
- return 0;
+ return false;
/* Check that the LASI temp alarm status was triggered */
- hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
- MDIO_MMD_PMAPMD, &phy_data);
-
- if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
- return 0;
+ status = hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
+ MDIO_MMD_PMAPMD, &phy_data);
+ if (status)
+ return false;
- return IXGBE_ERR_OVERTEMP;
+ return !!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM);
}
/** ixgbe_set_copper_phy_power - Control power for copper phy