diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k')
32 files changed, 27028 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig new file mode 100644 index 000000000..6914b37bb --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/Kconfig @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: ISC +config ATH5K + tristate "Atheros 5xxx wireless cards support" + depends on (PCI || ATH25) && MAC80211 + select ATH_COMMON + select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211 + select ATH5K_AHB if ATH25 + select ATH5K_PCI if !ATH25 + help + This module adds support for wireless adapters based on + Atheros 5xxx chipset. + + Currently the following chip versions are supported: + + MAC: AR5211 AR5212 + PHY: RF5111/2111 RF5112/2112 RF5413/2413 + + This driver uses the kernel's mac80211 subsystem. + + If you choose to build a module, it'll be called ath5k. Say M if + unsure. + +config ATH5K_DEBUG + bool "Atheros 5xxx debugging" + depends on ATH5K + help + Atheros 5xxx debugging messages. + + Say Y, if and you will get debug options for ath5k. + To use this, you need to mount debugfs: + + mount -t debugfs debug /sys/kernel/debug + + You will get access to files under: + /sys/kernel/debug/ath5k/phy0/ + + To enable debug, pass the debug level to the debug module + parameter. For example: + + modprobe ath5k debug=0x00000400 + +config ATH5K_TRACER + bool "Atheros 5xxx tracer" + depends on ATH5K + depends on EVENT_TRACING + help + Say Y here to enable tracepoints for the ath5k driver + using the kernel tracing infrastructure. Select this + option if you are interested in debugging the driver. + + If unsure, say N. + +config ATH5K_AHB + bool "Atheros 5xxx AHB bus support" + depends on ATH25 && ATH5K + help + This adds support for WiSoC type chipsets of the 5xxx Atheros + family. + +config ATH5K_PCI + bool "Atheros 5xxx PCI bus support" + depends on (!ATH25 && PCI) + help + This adds support for PCI type chipsets of the 5xxx Atheros + family. + +config ATH5K_TEST_CHANNELS + bool "Enables testing channels on ath5k" + depends on ATH5K && CFG80211_CERTIFICATION_ONUS + help + This enables non-standard IEEE 802.11 channels on ath5k, which + can be used for research purposes. This option should be disabled + unless doing research. diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile new file mode 100644 index 000000000..78f318d49 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/Makefile @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: ISC +ath5k-y += caps.o +ath5k-y += initvals.o +ath5k-y += eeprom.o +ath5k-y += gpio.o +ath5k-y += desc.o +ath5k-y += dma.o +ath5k-y += qcu.o +ath5k-y += pcu.o +ath5k-y += phy.o +ath5k-y += reset.o +ath5k-y += attach.o +ath5k-y += base.o +CFLAGS_base.o += -I$(src) +ath5k-y += led.o +ath5k-y += rfkill.o +ath5k-y += ani.o +ath5k-y += sysfs.o +ath5k-y += mac80211-ops.o +ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o +ath5k-$(CONFIG_ATH5K_AHB) += ahb.o +ath5k-$(CONFIG_ATH5K_PCI) += pci.o +obj-$(CONFIG_ATH5K) += ath5k.o diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c new file mode 100644 index 000000000..28a1e5eff --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -0,0 +1,231 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/module.h> +#include <linux/nl80211.h> +#include <linux/platform_device.h> +#include <linux/etherdevice.h> +#include <ath25_platform.h> +#include "ath5k.h" +#include "debug.h" +#include "base.h" +#include "reg.h" + +/* return bus cachesize in 4B word units */ +static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz) +{ + *csz = L1_CACHE_BYTES >> 2; +} + +static bool +ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data) +{ + struct ath5k_hw *ah = common->priv; + struct platform_device *pdev = to_platform_device(ah->dev); + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + u16 *eeprom, *eeprom_end; + + eeprom = (u16 *) bcfg->radio; + eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ; + + eeprom += off; + if (eeprom > eeprom_end) + return false; + + *data = *eeprom; + return true; +} + +int ath5k_hw_read_srev(struct ath5k_hw *ah) +{ + struct platform_device *pdev = to_platform_device(ah->dev); + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + ah->ah_mac_srev = bcfg->devid; + return 0; +} + +static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + struct platform_device *pdev = to_platform_device(ah->dev); + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + u8 *cfg_mac; + + if (to_platform_device(ah->dev)->id == 0) + cfg_mac = bcfg->config->wlan0_mac; + else + cfg_mac = bcfg->config->wlan1_mac; + + memcpy(mac, cfg_mac, ETH_ALEN); + return 0; +} + +static const struct ath_bus_ops ath_ahb_bus_ops = { + .ath_bus_type = ATH_AHB, + .read_cachesize = ath5k_ahb_read_cachesize, + .eeprom_read = ath5k_ahb_eeprom_read, + .eeprom_read_mac = ath5k_ahb_eeprom_read_mac, +}; + +/*Initialization*/ +static int ath_ahb_probe(struct platform_device *pdev) +{ + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + struct ath5k_hw *ah; + struct ieee80211_hw *hw; + struct resource *res; + void __iomem *mem; + int irq; + int ret = 0; + u32 reg; + + if (!dev_get_platdata(&pdev->dev)) { + dev_err(&pdev->dev, "no platform data specified\n"); + ret = -EINVAL; + goto err_out; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no memory resource found\n"); + ret = -ENXIO; + goto err_out; + } + + mem = ioremap(res->start, resource_size(res)); + if (mem == NULL) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto err_out; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no IRQ resource found: %d\n", irq); + ret = irq; + goto err_iounmap; + } + + hw = ieee80211_alloc_hw(sizeof(struct ath5k_hw), &ath5k_hw_ops); + if (hw == NULL) { + dev_err(&pdev->dev, "no memory for ieee80211_hw\n"); + ret = -ENOMEM; + goto err_iounmap; + } + + ah = hw->priv; + ah->hw = hw; + ah->dev = &pdev->dev; + ah->iobase = mem; + ah->irq = irq; + ah->devid = bcfg->devid; + + if (bcfg->devid >= AR5K_SREV_AR2315_R6) { + /* Enable WMAC AHB arbitration */ + reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN; + iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + + /* Enable global WMAC swapping */ + reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP); + reg |= AR5K_AR2315_BYTESWAP_WMAC; + iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP); + } else { + /* Enable WMAC DMA access (assuming 5312 or 231x*/ + /* TODO: check other platforms */ + reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE); + if (to_platform_device(ah->dev)->id == 0) + reg |= AR5K_AR5312_ENABLE_WLAN0; + else + reg |= AR5K_AR5312_ENABLE_WLAN1; + iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE); + + /* + * On a dual-band AR5312, the multiband radio is only + * used as pass-through. Disable 2 GHz support in the + * driver for it + */ + if (to_platform_device(ah->dev)->id == 0 && + (bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) == + (BD_WLAN1 | BD_WLAN0)) + ah->ah_capabilities.cap_needs_2GHz_ovr = true; + else + ah->ah_capabilities.cap_needs_2GHz_ovr = false; + } + + ret = ath5k_init_ah(ah, &ath_ahb_bus_ops); + if (ret != 0) { + dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret); + ret = -ENODEV; + goto err_free_hw; + } + + platform_set_drvdata(pdev, hw); + + return 0; + + err_free_hw: + ieee80211_free_hw(hw); + err_iounmap: + iounmap(mem); + err_out: + return ret; +} + +static int ath_ahb_remove(struct platform_device *pdev) +{ + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); + struct ieee80211_hw *hw = platform_get_drvdata(pdev); + struct ath5k_hw *ah; + u32 reg; + + if (!hw) + return 0; + + ah = hw->priv; + + if (bcfg->devid >= AR5K_SREV_AR2315_R6) { + /* Disable WMAC AHB arbitration */ + reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN; + iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL); + } else { + /*Stop DMA access */ + reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE); + if (to_platform_device(ah->dev)->id == 0) + reg &= ~AR5K_AR5312_ENABLE_WLAN0; + else + reg &= ~AR5K_AR5312_ENABLE_WLAN1; + iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE); + } + + ath5k_deinit_ah(ah); + iounmap(ah->iobase); + ieee80211_free_hw(hw); + + return 0; +} + +static struct platform_driver ath_ahb_driver = { + .probe = ath_ahb_probe, + .remove = ath_ahb_remove, + .driver = { + .name = "ar231x-wmac", + }, +}; + +module_platform_driver(ath_ahb_driver); diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c new file mode 100644 index 000000000..850c608b4 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ani.c @@ -0,0 +1,754 @@ +/* + * Copyright (C) 2010 Bruno Randolf <br1@einfach.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "ani.h" + +/** + * DOC: Basic ANI Operation + * + * Adaptive Noise Immunity (ANI) controls five noise immunity parameters + * depending on the amount of interference in the environment, increasing + * or reducing sensitivity as necessary. + * + * The parameters are: + * + * - "noise immunity" + * + * - "spur immunity" + * + * - "firstep level" + * + * - "OFDM weak signal detection" + * + * - "CCK weak signal detection" + * + * Basically we look at the amount of ODFM and CCK timing errors we get and then + * raise or lower immunity accordingly by setting one or more of these + * parameters. + * + * Newer chipsets have PHY error counters in hardware which will generate a MIB + * interrupt when they overflow. Older hardware has too enable PHY error frames + * by setting a RX flag and then count every single PHY error. When a specified + * threshold of errors has been reached we will raise immunity. + * Also we regularly check the amount of errors and lower or raise immunity as + * necessary. + */ + + +/***********************\ +* ANI parameter control * +\***********************/ + +/** + * ath5k_ani_set_noise_immunity_level() - Set noise immunity level + * @ah: The &struct ath5k_hw + * @level: level between 0 and @ATH5K_ANI_MAX_NOISE_IMM_LVL + */ +void +ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) +{ + /* TODO: + * ANI documents suggest the following five levels to use, but the HAL + * and ath9k use only the last two levels, making this + * essentially an on/off option. There *may* be a reason for this (???), + * so i stick with the HAL version for now... + */ +#if 0 + static const s8 lo[] = { -52, -56, -60, -64, -70 }; + static const s8 hi[] = { -18, -18, -16, -14, -12 }; + static const s8 sz[] = { -34, -41, -48, -55, -62 }; + static const s8 fr[] = { -70, -72, -75, -78, -80 }; +#else + static const s8 lo[] = { -64, -70 }; + static const s8 hi[] = { -14, -12 }; + static const s8 sz[] = { -55, -62 }; + static const s8 fr[] = { -78, -80 }; +#endif + if (level < 0 || level >= ARRAY_SIZE(sz)) { + ATH5K_ERR(ah, "noise immunity level %d out of range", + level); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_TOT, sz[level]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_AGCCOARSE, + AR5K_PHY_AGCCOARSE_LO, lo[level]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_AGCCOARSE, + AR5K_PHY_AGCCOARSE_HI, hi[level]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG, + AR5K_PHY_SIG_FIRPWR, fr[level]); + + ah->ani_state.noise_imm_level = level; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); +} + +/** + * ath5k_ani_set_spur_immunity_level() - Set spur immunity level + * @ah: The &struct ath5k_hw + * @level: level between 0 and @max_spur_level (the maximum level is dependent + * on the chip revision). + */ +void +ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level) +{ + static const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 }; + + if (level < 0 || level >= ARRAY_SIZE(val) || + level > ah->ani_state.max_spur_level) { + ATH5K_ERR(ah, "spur immunity level %d out of range", + level); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, + AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, val[level]); + + ah->ani_state.spur_level = level; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); +} + +/** + * ath5k_ani_set_firstep_level() - Set "firstep" level + * @ah: The &struct ath5k_hw + * @level: level between 0 and @ATH5K_ANI_MAX_FIRSTEP_LVL + */ +void +ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level) +{ + static const int val[] = { 0, 4, 8 }; + + if (level < 0 || level >= ARRAY_SIZE(val)) { + ATH5K_ERR(ah, "firstep level %d out of range", level); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SIG, + AR5K_PHY_SIG_FIRSTEP, val[level]); + + ah->ani_state.firstep_level = level; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level); +} + +/** + * ath5k_ani_set_ofdm_weak_signal_detection() - Set OFDM weak signal detection + * @ah: The &struct ath5k_hw + * @on: turn on or off + */ +void +ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on) +{ + static const int m1l[] = { 127, 50 }; + static const int m2l[] = { 127, 40 }; + static const int m1[] = { 127, 0x4d }; + static const int m2[] = { 127, 0x40 }; + static const int m2cnt[] = { 31, 16 }; + static const int m2lcnt[] = { 63, 48 }; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_M1, m1l[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_M2, m2l[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR, + AR5K_PHY_WEAK_OFDM_HIGH_THR_M1, m1[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR, + AR5K_PHY_WEAK_OFDM_HIGH_THR_M2, m2[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_HIGH_THR, + AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT, m2cnt[on]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT, m2lcnt[on]); + + if (on) + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR, + AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN); + + ah->ani_state.ofdm_weak_sig = on; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "turned %s", + on ? "on" : "off"); +} + +/** + * ath5k_ani_set_cck_weak_signal_detection() - Set CCK weak signal detection + * @ah: The &struct ath5k_hw + * @on: turn on or off + */ +void +ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on) +{ + static const int val[] = { 8, 6 }; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_CCK_CROSSCORR, + AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR, val[on]); + ah->ani_state.cck_weak_sig = on; + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "turned %s", + on ? "on" : "off"); +} + + +/***************\ +* ANI algorithm * +\***************/ + +/** + * ath5k_ani_raise_immunity() - Increase noise immunity + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state + * @ofdm_trigger: If this is true we are called because of too many OFDM errors, + * the algorithm will tune more parameters then. + * + * Try to raise noise immunity (=decrease sensitivity) in several steps + * depending on the average RSSI of the beacons we received. + */ +static void +ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as, + bool ofdm_trigger) +{ + int rssi = ewma_beacon_rssi_read(&ah->ah_beacon_rssi_avg); + + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "raise immunity (%s)", + ofdm_trigger ? "ODFM" : "CCK"); + + /* first: raise noise immunity */ + if (as->noise_imm_level < ATH5K_ANI_MAX_NOISE_IMM_LVL) { + ath5k_ani_set_noise_immunity_level(ah, as->noise_imm_level + 1); + return; + } + + /* only OFDM: raise spur immunity level */ + if (ofdm_trigger && + as->spur_level < ah->ani_state.max_spur_level) { + ath5k_ani_set_spur_immunity_level(ah, as->spur_level + 1); + return; + } + + /* AP mode */ + if (ah->opmode == NL80211_IFTYPE_AP) { + if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) + ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); + return; + } + + /* STA and IBSS mode */ + + /* TODO: for IBSS mode it would be better to keep a beacon RSSI average + * per each neighbour node and use the minimum of these, to make sure we + * don't shut out a remote node by raising immunity too high. */ + + if (rssi > ATH5K_ANI_RSSI_THR_HIGH) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, + "beacon RSSI high"); + /* only OFDM: beacon RSSI is high, we can disable ODFM weak + * signal detection */ + if (ofdm_trigger && as->ofdm_weak_sig) { + ath5k_ani_set_ofdm_weak_signal_detection(ah, false); + ath5k_ani_set_spur_immunity_level(ah, 0); + return; + } + /* as a last resort or CCK: raise firstep level */ + if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) { + ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); + return; + } + } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) { + /* beacon RSSI in mid range, we need OFDM weak signal detect, + * but can raise firstep level */ + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, + "beacon RSSI mid"); + if (ofdm_trigger && !as->ofdm_weak_sig) + ath5k_ani_set_ofdm_weak_signal_detection(ah, true); + if (as->firstep_level < ATH5K_ANI_MAX_FIRSTEP_LVL) + ath5k_ani_set_firstep_level(ah, as->firstep_level + 1); + return; + } else if (ah->ah_current_channel->band == NL80211_BAND_2GHZ) { + /* beacon RSSI is low. in B/G mode turn of OFDM weak signal + * detect and zero firstep level to maximize CCK sensitivity */ + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, + "beacon RSSI low, 2GHz"); + if (ofdm_trigger && as->ofdm_weak_sig) + ath5k_ani_set_ofdm_weak_signal_detection(ah, false); + if (as->firstep_level > 0) + ath5k_ani_set_firstep_level(ah, 0); + return; + } + + /* TODO: why not?: + if (as->cck_weak_sig == true) { + ath5k_ani_set_cck_weak_signal_detection(ah, false); + } + */ +} + +/** + * ath5k_ani_lower_immunity() - Decrease noise immunity + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state + * + * Try to lower noise immunity (=increase sensitivity) in several steps + * depending on the average RSSI of the beacons we received. + */ +static void +ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as) +{ + int rssi = ewma_beacon_rssi_read(&ah->ah_beacon_rssi_avg); + + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "lower immunity"); + + if (ah->opmode == NL80211_IFTYPE_AP) { + /* AP mode */ + if (as->firstep_level > 0) { + ath5k_ani_set_firstep_level(ah, as->firstep_level - 1); + return; + } + } else { + /* STA and IBSS mode (see TODO above) */ + if (rssi > ATH5K_ANI_RSSI_THR_HIGH) { + /* beacon signal is high, leave OFDM weak signal + * detection off or it may oscillate + * TODO: who said it's off??? */ + } else if (rssi > ATH5K_ANI_RSSI_THR_LOW) { + /* beacon RSSI is mid-range: turn on ODFM weak signal + * detection and next, lower firstep level */ + if (!as->ofdm_weak_sig) { + ath5k_ani_set_ofdm_weak_signal_detection(ah, + true); + return; + } + if (as->firstep_level > 0) { + ath5k_ani_set_firstep_level(ah, + as->firstep_level - 1); + return; + } + } else { + /* beacon signal is low: only reduce firstep level */ + if (as->firstep_level > 0) { + ath5k_ani_set_firstep_level(ah, + as->firstep_level - 1); + return; + } + } + } + + /* all modes */ + if (as->spur_level > 0) { + ath5k_ani_set_spur_immunity_level(ah, as->spur_level - 1); + return; + } + + /* finally, reduce noise immunity */ + if (as->noise_imm_level > 0) { + ath5k_ani_set_noise_immunity_level(ah, as->noise_imm_level - 1); + return; + } +} + +/** + * ath5k_hw_ani_get_listen_time() - Update counters and return listening time + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state + * + * Return an approximation of the time spent "listening" in milliseconds (ms) + * since the last call of this function. + * Save a snapshot of the counter values for debugging/statistics. + */ +static int +ath5k_hw_ani_get_listen_time(struct ath5k_hw *ah, struct ath5k_ani_state *as) +{ + struct ath_common *common = ath5k_hw_common(ah); + int listen; + + spin_lock_bh(&common->cc_lock); + + ath_hw_cycle_counters_update(common); + memcpy(&as->last_cc, &common->cc_ani, sizeof(as->last_cc)); + + /* clears common->cc_ani */ + listen = ath_hw_get_listen_time(common); + + spin_unlock_bh(&common->cc_lock); + + return listen; +} + +/** + * ath5k_ani_save_and_clear_phy_errors() - Clear and save PHY error counters + * @ah: The &struct ath5k_hw + * @as: The &struct ath5k_ani_state + * + * Clear the PHY error counters as soon as possible, since this might be called + * from a MIB interrupt and we want to make sure we don't get interrupted again. + * Add the count of CCK and OFDM errors to our internal state, so it can be used + * by the algorithm later. + * + * Will be called from interrupt and tasklet context. + * Returns 0 if both counters are zero. + */ +static int +ath5k_ani_save_and_clear_phy_errors(struct ath5k_hw *ah, + struct ath5k_ani_state *as) +{ + unsigned int ofdm_err, cck_err; + + if (!ah->ah_capabilities.cap_has_phyerr_counters) + return 0; + + ofdm_err = ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1); + cck_err = ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2); + + /* reset counters first, we might be in a hurry (interrupt) */ + ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_OFDM_TRIG_HIGH, + AR5K_PHYERR_CNT1); + ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_CCK_TRIG_HIGH, + AR5K_PHYERR_CNT2); + + ofdm_err = ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - ofdm_err); + cck_err = ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - cck_err); + + /* sometimes both can be zero, especially when there is a superfluous + * second interrupt. detect that here and return an error. */ + if (ofdm_err <= 0 && cck_err <= 0) + return 0; + + /* avoid negative values should one of the registers overflow */ + if (ofdm_err > 0) { + as->ofdm_errors += ofdm_err; + as->sum_ofdm_errors += ofdm_err; + } + if (cck_err > 0) { + as->cck_errors += cck_err; + as->sum_cck_errors += cck_err; + } + return 1; +} + +/** + * ath5k_ani_period_restart() - Restart ANI period + * @as: The &struct ath5k_ani_state + * + * Just reset counters, so they are clear for the next "ani period". + */ +static void +ath5k_ani_period_restart(struct ath5k_ani_state *as) +{ + /* keep last values for debugging */ + as->last_ofdm_errors = as->ofdm_errors; + as->last_cck_errors = as->cck_errors; + as->last_listen = as->listen_time; + + as->ofdm_errors = 0; + as->cck_errors = 0; + as->listen_time = 0; +} + +/** + * ath5k_ani_calibration() - The main ANI calibration function + * @ah: The &struct ath5k_hw + * + * We count OFDM and CCK errors relative to the time where we did not send or + * receive ("listen" time) and raise or lower immunity accordingly. + * This is called regularly (every second) from the calibration timer, but also + * when an error threshold has been reached. + * + * In order to synchronize access from different contexts, this should be + * called only indirectly by scheduling the ANI tasklet! + */ +void +ath5k_ani_calibration(struct ath5k_hw *ah) +{ + struct ath5k_ani_state *as = &ah->ani_state; + int listen, ofdm_high, ofdm_low, cck_high, cck_low; + + /* get listen time since last call and add it to the counter because we + * might not have restarted the "ani period" last time. + * always do this to calculate the busy time also in manual mode */ + listen = ath5k_hw_ani_get_listen_time(ah, as); + as->listen_time += listen; + + if (as->ani_mode != ATH5K_ANI_MODE_AUTO) + return; + + ath5k_ani_save_and_clear_phy_errors(ah, as); + + ofdm_high = as->listen_time * ATH5K_ANI_OFDM_TRIG_HIGH / 1000; + cck_high = as->listen_time * ATH5K_ANI_CCK_TRIG_HIGH / 1000; + ofdm_low = as->listen_time * ATH5K_ANI_OFDM_TRIG_LOW / 1000; + cck_low = as->listen_time * ATH5K_ANI_CCK_TRIG_LOW / 1000; + + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, + "listen %d (now %d)", as->listen_time, listen); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, + "check high ofdm %d/%d cck %d/%d", + as->ofdm_errors, ofdm_high, as->cck_errors, cck_high); + + if (as->ofdm_errors > ofdm_high || as->cck_errors > cck_high) { + /* too many PHY errors - we have to raise immunity */ + bool ofdm_flag = as->ofdm_errors > ofdm_high; + ath5k_ani_raise_immunity(ah, as, ofdm_flag); + ath5k_ani_period_restart(as); + + } else if (as->listen_time > 5 * ATH5K_ANI_LISTEN_PERIOD) { + /* If more than 5 (TODO: why 5?) periods have passed and we got + * relatively little errors we can try to lower immunity */ + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, + "check low ofdm %d/%d cck %d/%d", + as->ofdm_errors, ofdm_low, as->cck_errors, cck_low); + + if (as->ofdm_errors <= ofdm_low && as->cck_errors <= cck_low) + ath5k_ani_lower_immunity(ah, as); + + ath5k_ani_period_restart(as); + } +} + + +/*******************\ +* Interrupt handler * +\*******************/ + +/** + * ath5k_ani_mib_intr() - Interrupt handler for ANI MIB counters + * @ah: The &struct ath5k_hw + * + * Just read & reset the registers quickly, so they don't generate more + * interrupts, save the counters and schedule the tasklet to decide whether + * to raise immunity or not. + * + * We just need to handle PHY error counters, ath5k_hw_update_mib_counters() + * should take care of all "normal" MIB interrupts. + */ +void +ath5k_ani_mib_intr(struct ath5k_hw *ah) +{ + struct ath5k_ani_state *as = &ah->ani_state; + + /* nothing to do here if HW does not have PHY error counters - they + * can't be the reason for the MIB interrupt then */ + if (!ah->ah_capabilities.cap_has_phyerr_counters) + return; + + /* not in use but clear anyways */ + ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT); + ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); + + if (ah->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO) + return; + + /* If one of the errors triggered, we can get a superfluous second + * interrupt, even though we have already reset the register. The + * function detects that so we can return early. */ + if (ath5k_ani_save_and_clear_phy_errors(ah, as) == 0) + return; + + if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH || + as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH) + tasklet_schedule(&ah->ani_tasklet); +} + +/** + * ath5k_ani_phy_error_report - Used by older HW to report PHY errors + * + * @ah: The &struct ath5k_hw + * @phyerr: One of enum ath5k_phy_error_code + * + * This is used by hardware without PHY error counters to report PHY errors + * on a frame-by-frame basis, instead of the interrupt. + */ +void +ath5k_ani_phy_error_report(struct ath5k_hw *ah, + enum ath5k_phy_error_code phyerr) +{ + struct ath5k_ani_state *as = &ah->ani_state; + + if (phyerr == AR5K_RX_PHY_ERROR_OFDM_TIMING) { + as->ofdm_errors++; + if (as->ofdm_errors > ATH5K_ANI_OFDM_TRIG_HIGH) + tasklet_schedule(&ah->ani_tasklet); + } else if (phyerr == AR5K_RX_PHY_ERROR_CCK_TIMING) { + as->cck_errors++; + if (as->cck_errors > ATH5K_ANI_CCK_TRIG_HIGH) + tasklet_schedule(&ah->ani_tasklet); + } +} + + +/****************\ +* Initialization * +\****************/ + +/** + * ath5k_enable_phy_err_counters() - Enable PHY error counters + * @ah: The &struct ath5k_hw + * + * Enable PHY error counters for OFDM and CCK timing errors. + */ +static void +ath5k_enable_phy_err_counters(struct ath5k_hw *ah) +{ + ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_OFDM_TRIG_HIGH, + AR5K_PHYERR_CNT1); + ath5k_hw_reg_write(ah, ATH5K_PHYERR_CNT_MAX - ATH5K_ANI_CCK_TRIG_HIGH, + AR5K_PHYERR_CNT2); + ath5k_hw_reg_write(ah, AR5K_PHY_ERR_FIL_OFDM, AR5K_PHYERR_CNT1_MASK); + ath5k_hw_reg_write(ah, AR5K_PHY_ERR_FIL_CCK, AR5K_PHYERR_CNT2_MASK); + + /* not in use */ + ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT); + ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); +} + +/** + * ath5k_disable_phy_err_counters() - Disable PHY error counters + * @ah: The &struct ath5k_hw + * + * Disable PHY error counters for OFDM and CCK timing errors. + */ +static void +ath5k_disable_phy_err_counters(struct ath5k_hw *ah) +{ + ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT1); + ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT2); + ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT1_MASK); + ath5k_hw_reg_write(ah, 0, AR5K_PHYERR_CNT2_MASK); + + /* not in use */ + ath5k_hw_reg_write(ah, 0, AR5K_OFDM_FIL_CNT); + ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT); +} + +/** + * ath5k_ani_init() - Initialize ANI + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_ani_mode + * + * Initialize ANI according to mode. + */ +void +ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode) +{ + /* ANI is only possible on 5212 and newer */ + if (ah->ah_version < AR5K_AR5212) + return; + + if (mode < ATH5K_ANI_MODE_OFF || mode > ATH5K_ANI_MODE_AUTO) { + ATH5K_ERR(ah, "ANI mode %d out of range", mode); + return; + } + + /* clear old state information */ + memset(&ah->ani_state, 0, sizeof(ah->ani_state)); + + /* older hardware has more spur levels than newer */ + if (ah->ah_mac_srev < AR5K_SREV_AR2414) + ah->ani_state.max_spur_level = 7; + else + ah->ani_state.max_spur_level = 2; + + /* initial values for our ani parameters */ + if (mode == ATH5K_ANI_MODE_OFF) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI off\n"); + } else if (mode == ATH5K_ANI_MODE_MANUAL_LOW) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, + "ANI manual low -> high sensitivity\n"); + ath5k_ani_set_noise_immunity_level(ah, 0); + ath5k_ani_set_spur_immunity_level(ah, 0); + ath5k_ani_set_firstep_level(ah, 0); + ath5k_ani_set_ofdm_weak_signal_detection(ah, true); + ath5k_ani_set_cck_weak_signal_detection(ah, true); + } else if (mode == ATH5K_ANI_MODE_MANUAL_HIGH) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, + "ANI manual high -> low sensitivity\n"); + ath5k_ani_set_noise_immunity_level(ah, + ATH5K_ANI_MAX_NOISE_IMM_LVL); + ath5k_ani_set_spur_immunity_level(ah, + ah->ani_state.max_spur_level); + ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL); + ath5k_ani_set_ofdm_weak_signal_detection(ah, false); + ath5k_ani_set_cck_weak_signal_detection(ah, false); + } else if (mode == ATH5K_ANI_MODE_AUTO) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "ANI auto\n"); + ath5k_ani_set_noise_immunity_level(ah, 0); + ath5k_ani_set_spur_immunity_level(ah, 0); + ath5k_ani_set_firstep_level(ah, 0); + ath5k_ani_set_ofdm_weak_signal_detection(ah, true); + ath5k_ani_set_cck_weak_signal_detection(ah, false); + } + + /* newer hardware has PHY error counter registers which we can use to + * get OFDM and CCK error counts. older hardware has to set rxfilter and + * report every single PHY error by calling ath5k_ani_phy_error_report() + */ + if (mode == ATH5K_ANI_MODE_AUTO) { + if (ah->ah_capabilities.cap_has_phyerr_counters) + ath5k_enable_phy_err_counters(ah); + else + ath5k_hw_set_rx_filter(ah, ath5k_hw_get_rx_filter(ah) | + AR5K_RX_FILTER_PHYERR); + } else { + if (ah->ah_capabilities.cap_has_phyerr_counters) + ath5k_disable_phy_err_counters(ah); + else + ath5k_hw_set_rx_filter(ah, ath5k_hw_get_rx_filter(ah) & + ~AR5K_RX_FILTER_PHYERR); + } + + ah->ani_state.ani_mode = mode; +} + + +/**************\ +* Debug output * +\**************/ + +#ifdef CONFIG_ATH5K_DEBUG + +/** + * ath5k_ani_print_counters() - Print ANI counters + * @ah: The &struct ath5k_hw + * + * Used for debugging ANI + */ +void +ath5k_ani_print_counters(struct ath5k_hw *ah) +{ + /* clears too */ + pr_notice("ACK fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_ACK_FAIL)); + pr_notice("RTS fail\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_FAIL)); + pr_notice("RTS success\t%d\n", ath5k_hw_reg_read(ah, AR5K_RTS_OK)); + pr_notice("FCS error\t%d\n", ath5k_hw_reg_read(ah, AR5K_FCS_FAIL)); + + /* no clear */ + pr_notice("tx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_TX)); + pr_notice("rx\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RX)); + pr_notice("busy\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_RXCLR)); + pr_notice("cycles\t%d\n", ath5k_hw_reg_read(ah, AR5K_PROFCNT_CYCLE)); + + pr_notice("AR5K_PHYERR_CNT1\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1)); + pr_notice("AR5K_PHYERR_CNT2\t%d\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2)); + pr_notice("AR5K_OFDM_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_OFDM_FIL_CNT)); + pr_notice("AR5K_CCK_FIL_CNT\t%d\n", + ath5k_hw_reg_read(ah, AR5K_CCK_FIL_CNT)); +} + +#endif diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h new file mode 100644 index 000000000..21aa35546 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ani.h @@ -0,0 +1,119 @@ +/* + * Copyright (C) 2010 Bruno Randolf <br1@einfach.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef ANI_H +#define ANI_H + +#include "../ath.h" + +enum ath5k_phy_error_code; + +/* these thresholds are relative to the ATH5K_ANI_LISTEN_PERIOD */ +#define ATH5K_ANI_LISTEN_PERIOD 100 +#define ATH5K_ANI_OFDM_TRIG_HIGH 500 +#define ATH5K_ANI_OFDM_TRIG_LOW 200 +#define ATH5K_ANI_CCK_TRIG_HIGH 200 +#define ATH5K_ANI_CCK_TRIG_LOW 100 + +/* average beacon RSSI thresholds */ +#define ATH5K_ANI_RSSI_THR_HIGH 40 +#define ATH5K_ANI_RSSI_THR_LOW 7 + +/* maximum available levels */ +#define ATH5K_ANI_MAX_FIRSTEP_LVL 2 +#define ATH5K_ANI_MAX_NOISE_IMM_LVL 1 + + +/** + * enum ath5k_ani_mode - mode for ANI / noise sensitivity + * + * @ATH5K_ANI_MODE_OFF: Turn ANI off. This can be useful to just stop the ANI + * algorithm after it has been on auto mode. + * @ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low, + * maximizing sensitivity. ANI will not run. + * @ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high, + * minimizing sensitivity. ANI will not run. + * @ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the + * amount of OFDM and CCK frame errors (default). + */ +enum ath5k_ani_mode { + ATH5K_ANI_MODE_OFF = 0, + ATH5K_ANI_MODE_MANUAL_LOW = 1, + ATH5K_ANI_MODE_MANUAL_HIGH = 2, + ATH5K_ANI_MODE_AUTO = 3 +}; + + +/** + * struct ath5k_ani_state - ANI state and associated counters + * @ani_mode: One of enum ath5k_ani_mode + * @noise_imm_level: Noise immunity level + * @spur_level: Spur immunity level + * @firstep_level: FIRstep level + * @ofdm_weak_sig: OFDM weak signal detection state (on/off) + * @cck_weak_sig: CCK weak signal detection state (on/off) + * @max_spur_level: Max spur immunity level (chip specific) + * @listen_time: Listen time + * @ofdm_errors: OFDM timing error count + * @cck_errors: CCK timing error count + * @last_cc: The &struct ath_cycle_counters (for stats) + * @last_listen: Listen time from previous run (for stats) + * @last_ofdm_errors: OFDM timing error count from previous run (for tats) + * @last_cck_errors: CCK timing error count from previous run (for stats) + * @sum_ofdm_errors: Sum of OFDM timing errors (for stats) + * @sum_cck_errors: Sum of all CCK timing errors (for stats) + */ +struct ath5k_ani_state { + enum ath5k_ani_mode ani_mode; + + /* state */ + int noise_imm_level; + int spur_level; + int firstep_level; + bool ofdm_weak_sig; + bool cck_weak_sig; + + int max_spur_level; + + /* used by the algorithm */ + unsigned int listen_time; + unsigned int ofdm_errors; + unsigned int cck_errors; + + /* debug/statistics only: numbers from last ANI calibration */ + struct ath_cycle_counters last_cc; + unsigned int last_listen; + unsigned int last_ofdm_errors; + unsigned int last_cck_errors; + unsigned int sum_ofdm_errors; + unsigned int sum_cck_errors; +}; + +void ath5k_ani_init(struct ath5k_hw *ah, enum ath5k_ani_mode mode); +void ath5k_ani_mib_intr(struct ath5k_hw *ah); +void ath5k_ani_calibration(struct ath5k_hw *ah); +void ath5k_ani_phy_error_report(struct ath5k_hw *ah, + enum ath5k_phy_error_code phyerr); + +/* for manual control */ +void ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level); +void ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level); +void ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level); +void ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on); +void ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on); + +void ath5k_ani_print_counters(struct ath5k_hw *ah); + +#endif /* ANI_H */ diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h new file mode 100644 index 000000000..f595204f4 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -0,0 +1,1714 @@ +/* + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _ATH5K_H +#define _ATH5K_H + +/* TODO: Clean up channel debugging (doesn't work anyway) and start + * working on reg. control code using all available eeprom information + * (rev. engineering needed) */ +#define CHAN_DEBUG 0 + +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/average.h> +#include <linux/leds.h> +#include <net/mac80211.h> +#include <net/cfg80211.h> + +/* RX/TX descriptor hw structs + * TODO: Driver part should only see sw structs */ +#include "desc.h" + +/* EEPROM structs/offsets + * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) + * and clean up common bits, then introduce set/get functions in eeprom.c */ +#include "eeprom.h" +#include "debug.h" +#include "../ath.h" +#include "ani.h" + +/* PCI IDs */ +#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ +#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ +#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ +#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ +#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ +#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ +#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ +#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ +#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ +#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ + +/****************************\ + GENERIC DRIVER DEFINITIONS +\****************************/ + +#define ATH5K_PRINTF(fmt, ...) \ + pr_warn("%s: " fmt, __func__, ##__VA_ARGS__) + +void __printf(3, 4) +_ath5k_printk(const struct ath5k_hw *ah, const char *level, + const char *fmt, ...); + +#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ + _ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__) + +#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \ +do { \ + if (net_ratelimit()) \ + ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ +} while (0) + +#define ATH5K_INFO(_sc, _fmt, ...) \ + ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) + +#define ATH5K_WARN(_sc, _fmt, ...) \ + ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) + +#define ATH5K_ERR(_sc, _fmt, ...) \ + ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) + +/* + * AR5K REGISTER ACCESS + */ + +/* Some macros to read/write fields */ + +/* First shift, then mask */ +#define AR5K_REG_SM(_val, _flags) \ + (((_val) << _flags##_S) & (_flags)) + +/* First mask, then shift */ +#define AR5K_REG_MS(_val, _flags) \ + (((_val) & (_flags)) >> _flags##_S) + +/* Some registers can hold multiple values of interest. For this + * reason when we want to write to these registers we must first + * retrieve the values which we do not want to clear (lets call this + * old_data) and then set the register with this and our new_value: + * ( old_data | new_value) */ +#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ + (((_val) << _flags##_S) & (_flags)), _reg) + +#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ + (_mask)) | (_flags), _reg) + +#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) + +#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) + +/* Access QCU registers per queue */ +#define AR5K_REG_READ_Q(ah, _reg, _queue) \ + (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ + +#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ + ath5k_hw_reg_write(ah, (1 << _queue), _reg) + +#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ + _reg |= 1 << _queue; \ +} while (0) + +#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ + _reg &= ~(1 << _queue); \ +} while (0) + +/* Used while writing initvals */ +#define AR5K_REG_WAIT(_i) do { \ + if (_i % 64) \ + udelay(1); \ +} while (0) + +/* + * Some tunable values (these should be changeable by the user) + * TODO: Make use of them and add more options OR use debug/configfs + */ +#define AR5K_TUNE_DMA_BEACON_RESP 2 +#define AR5K_TUNE_SW_BEACON_RESP 10 +#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 +#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 +#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) +#define AR5K_TUNE_REGISTER_TIMEOUT 20000 +/* Register for RSSI threshold has a mask of 0xff, so 255 seems to + * be the max value. */ +#define AR5K_TUNE_RSSI_THRES 129 +/* This must be set when setting the RSSI threshold otherwise it can + * prevent a reset. If AR5K_RSSI_THR is read after writing to it + * the BMISS_THRES will be seen as 0, seems hardware doesn't keep + * track of it. Max value depends on hardware. For AR5210 this is just 7. + * For AR5211+ this seems to be up to 255. */ +#define AR5K_TUNE_BMISS_THRES 7 +#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 +#define AR5K_TUNE_BEACON_INTERVAL 100 +#define AR5K_TUNE_AIFS 2 +#define AR5K_TUNE_AIFS_11B 2 +#define AR5K_TUNE_AIFS_XR 0 +#define AR5K_TUNE_CWMIN 15 +#define AR5K_TUNE_CWMIN_11B 31 +#define AR5K_TUNE_CWMIN_XR 3 +#define AR5K_TUNE_CWMAX 1023 +#define AR5K_TUNE_CWMAX_11B 1023 +#define AR5K_TUNE_CWMAX_XR 7 +#define AR5K_TUNE_NOISE_FLOOR -72 +#define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95 +#define AR5K_TUNE_MAX_TXPOWER 63 +#define AR5K_TUNE_DEFAULT_TXPOWER 25 +#define AR5K_TUNE_TPC_TXPOWER false +#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */ +#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ +#define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ + +#define AR5K_INIT_CARR_SENSE_EN 1 + +/*Swap RX/TX Descriptor for big endian archs*/ +#if defined(__BIG_ENDIAN) +#define AR5K_INIT_CFG ( \ + AR5K_CFG_SWTD | AR5K_CFG_SWRD \ +) +#else +#define AR5K_INIT_CFG 0x00000000 +#endif + +/* Initial values */ +#define AR5K_INIT_CYCRSSI_THR1 2 + +/* Tx retry limit defaults from standard */ +#define AR5K_INIT_RETRY_SHORT 7 +#define AR5K_INIT_RETRY_LONG 4 + +/* Slot time */ +#define AR5K_INIT_SLOT_TIME_TURBO 6 +#define AR5K_INIT_SLOT_TIME_DEFAULT 9 +#define AR5K_INIT_SLOT_TIME_HALF_RATE 13 +#define AR5K_INIT_SLOT_TIME_QUARTER_RATE 21 +#define AR5K_INIT_SLOT_TIME_B 20 +#define AR5K_SLOT_TIME_MAX 0xffff + +/* SIFS */ +#define AR5K_INIT_SIFS_TURBO 6 +#define AR5K_INIT_SIFS_DEFAULT_BG 10 +#define AR5K_INIT_SIFS_DEFAULT_A 16 +#define AR5K_INIT_SIFS_HALF_RATE 32 +#define AR5K_INIT_SIFS_QUARTER_RATE 64 + +/* Used to calculate tx time for non 5/10/40MHz + * operation */ +/* It's preamble time + signal time (16 + 4) */ +#define AR5K_INIT_OFDM_PREAMPLE_TIME 20 +/* Preamble time for 40MHz (turbo) operation (min ?) */ +#define AR5K_INIT_OFDM_PREAMBLE_TIME_MIN 14 +#define AR5K_INIT_OFDM_SYMBOL_TIME 4 +#define AR5K_INIT_OFDM_PLCP_BITS 22 + +/* Rx latency for 5 and 10MHz operation (max ?) */ +#define AR5K_INIT_RX_LAT_MAX 63 +/* Tx latencies from initvals (5212 only but no problem + * because we only tweak them on 5212) */ +#define AR5K_INIT_TX_LAT_A 54 +#define AR5K_INIT_TX_LAT_BG 384 +/* Tx latency for 40MHz (turbo) operation (min ?) */ +#define AR5K_INIT_TX_LAT_MIN 32 +/* Default Tx/Rx latencies (same for 5211)*/ +#define AR5K_INIT_TX_LATENCY_5210 54 +#define AR5K_INIT_RX_LATENCY_5210 29 + +/* Tx frame to Tx data start delay */ +#define AR5K_INIT_TXF2TXD_START_DEFAULT 14 +#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12 +#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13 + +/* We need to increase PHY switch and agc settling time + * on turbo mode */ +#define AR5K_SWITCH_SETTLING 5760 +#define AR5K_SWITCH_SETTLING_TURBO 7168 + +#define AR5K_AGC_SETTLING 28 +/* 38 on 5210 but shouldn't matter */ +#define AR5K_AGC_SETTLING_TURBO 37 + + + +/*****************************\ +* GENERIC CHIPSET DEFINITIONS * +\*****************************/ + +/** + * enum ath5k_version - MAC Chips + * @AR5K_AR5210: AR5210 (Crete) + * @AR5K_AR5211: AR5211 (Oahu/Maui) + * @AR5K_AR5212: AR5212 (Venice) and newer + */ +enum ath5k_version { + AR5K_AR5210 = 0, + AR5K_AR5211 = 1, + AR5K_AR5212 = 2, +}; + +/** + * enum ath5k_radio - PHY Chips + * @AR5K_RF5110: RF5110 (Fez) + * @AR5K_RF5111: RF5111 (Sombrero) + * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2) + * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite) + * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor) + * @AR5K_RF2316: RF2315/2316 (Cobra SoC) + * @AR5K_RF2317: RF2317 (Spider SoC) + * @AR5K_RF2425: RF2425/2417 (Swan/Nalla) + */ +enum ath5k_radio { + AR5K_RF5110 = 0, + AR5K_RF5111 = 1, + AR5K_RF5112 = 2, + AR5K_RF2413 = 3, + AR5K_RF5413 = 4, + AR5K_RF2316 = 5, + AR5K_RF2317 = 6, + AR5K_RF2425 = 7, +}; + +/* + * Common silicon revision/version values + */ + +#define AR5K_SREV_UNKNOWN 0xffff + +#define AR5K_SREV_AR5210 0x00 /* Crete */ +#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ +#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ +#define AR5K_SREV_AR5311B 0x30 /* Spirit */ +#define AR5K_SREV_AR5211 0x40 /* Oahu */ +#define AR5K_SREV_AR5212 0x50 /* Venice */ +#define AR5K_SREV_AR5312_R2 0x52 /* AP31 */ +#define AR5K_SREV_AR5212_V4 0x54 /* ??? */ +#define AR5K_SREV_AR5213 0x55 /* ??? */ +#define AR5K_SREV_AR5312_R7 0x57 /* AP30 */ +#define AR5K_SREV_AR2313_R8 0x58 /* AP43 */ +#define AR5K_SREV_AR5213A 0x59 /* Hainan */ +#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ +#define AR5K_SREV_AR2414 0x70 /* Griffin */ +#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ +#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ +#define AR5K_SREV_AR5424 0x90 /* Condor */ +#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ +#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ +#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ +#define AR5K_SREV_AR5414 0xa0 /* Eagle */ +#define AR5K_SREV_AR2415 0xb0 /* Talon */ +#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ +#define AR5K_SREV_AR5418 0xca /* PCI-E */ +#define AR5K_SREV_AR2425 0xe0 /* Swan */ +#define AR5K_SREV_AR2417 0xf0 /* Nala */ + +#define AR5K_SREV_RAD_5110 0x00 +#define AR5K_SREV_RAD_5111 0x10 +#define AR5K_SREV_RAD_5111A 0x15 +#define AR5K_SREV_RAD_2111 0x20 +#define AR5K_SREV_RAD_5112 0x30 +#define AR5K_SREV_RAD_5112A 0x35 +#define AR5K_SREV_RAD_5112B 0x36 +#define AR5K_SREV_RAD_2112 0x40 +#define AR5K_SREV_RAD_2112A 0x45 +#define AR5K_SREV_RAD_2112B 0x46 +#define AR5K_SREV_RAD_2413 0x50 +#define AR5K_SREV_RAD_5413 0x60 +#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ +#define AR5K_SREV_RAD_2317 0x80 +#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ +#define AR5K_SREV_RAD_2425 0xa2 +#define AR5K_SREV_RAD_5133 0xc0 + +#define AR5K_SREV_PHY_5211 0x30 +#define AR5K_SREV_PHY_5212 0x41 +#define AR5K_SREV_PHY_5212A 0x42 +#define AR5K_SREV_PHY_5212B 0x43 +#define AR5K_SREV_PHY_2413 0x45 +#define AR5K_SREV_PHY_5413 0x61 +#define AR5K_SREV_PHY_2425 0x70 + +/* TODO add support to mac80211 for vendor-specific rates and modes */ + +/** + * DOC: Atheros XR + * + * Some of this information is based on Documentation from: + * + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG + * + * Atheros' eXtended Range - range enhancing extension is a modulation scheme + * that is supposed to double the link distance between an Atheros XR-enabled + * client device with an Atheros XR-enabled access point. This is achieved + * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB + * above what the 802.11 specifications demand. In addition, new (proprietary) + * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. + * + * Please note that can you either use XR or TURBO but you cannot use both, + * they are exclusive. + * + * Also note that we do not plan to support XR mode at least for now. You can + * get a mode similar to XR by using 5MHz bwmode. + */ + + +/** + * DOC: Atheros SuperAG + * + * In addition to XR we have another modulation scheme called TURBO mode + * that is supposed to provide a throughput transmission speed up to 40Mbit/s + * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two + * 54Mbit/s 802.11g channels. To use this feature both ends must support it. + * There is also a distinction between "static" and "dynamic" turbo modes: + * + * - Static: is the dumb version: devices set to this mode stick to it until + * the mode is turned off. + * + * - Dynamic: is the intelligent version, the network decides itself if it + * is ok to use turbo. As soon as traffic is detected on adjacent channels + * (which would get used in turbo mode), or when a non-turbo station joins + * the network, turbo mode won't be used until the situation changes again. + * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which + * monitors the used radio band in order to decide whether turbo mode may + * be used or not. + * + * This article claims Super G sticks to bonding of channels 5 and 6 for + * USA: + * + * https://www.pcworld.com/article/id,113428-page,1/article.html + * + * The channel bonding seems to be driver specific though. + * + * In addition to TURBO modes we also have the following features for even + * greater speed-up: + * + * - Bursting: allows multiple frames to be sent at once, rather than pausing + * after each frame. Bursting is a standards-compliant feature that can be + * used with any Access Point. + * + * - Fast frames: increases the amount of information that can be sent per + * frame, also resulting in a reduction of transmission overhead. It is a + * proprietary feature that needs to be supported by the Access Point. + * + * - Compression: data frames are compressed in real time using a Lempel Ziv + * algorithm. This is done transparently. Once this feature is enabled, + * compression and decompression takes place inside the chipset, without + * putting additional load on the host CPU. + * + * As with XR we also don't plan to support SuperAG features for now. You can + * get a mode similar to TURBO by using 40MHz bwmode. + */ + + +/** + * enum ath5k_driver_mode - PHY operation mode + * @AR5K_MODE_11A: 802.11a + * @AR5K_MODE_11B: 802.11b + * @AR5K_MODE_11G: 801.11g + * @AR5K_MODE_MAX: Used for boundary checks + * + * Do not change the order here, we use these as + * array indices and it also maps EEPROM structures. + */ +enum ath5k_driver_mode { + AR5K_MODE_11A = 0, + AR5K_MODE_11B = 1, + AR5K_MODE_11G = 2, + AR5K_MODE_MAX = 3 +}; + +/** + * enum ath5k_ant_mode - Antenna operation mode + * @AR5K_ANTMODE_DEFAULT: Default antenna setup + * @AR5K_ANTMODE_FIXED_A: Only antenna A is present + * @AR5K_ANTMODE_FIXED_B: Only antenna B is present + * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap + * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc + * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc + * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx- + * @AR5K_ANTMODE_MAX: Used for boundary checks + * + * For more infos on antenna control check out phy.c + */ +enum ath5k_ant_mode { + AR5K_ANTMODE_DEFAULT = 0, + AR5K_ANTMODE_FIXED_A = 1, + AR5K_ANTMODE_FIXED_B = 2, + AR5K_ANTMODE_SINGLE_AP = 3, + AR5K_ANTMODE_SECTOR_AP = 4, + AR5K_ANTMODE_SECTOR_STA = 5, + AR5K_ANTMODE_DEBUG = 6, + AR5K_ANTMODE_MAX, +}; + +/** + * enum ath5k_bw_mode - Bandwidth operation mode + * @AR5K_BWMODE_DEFAULT: 20MHz, default operation + * @AR5K_BWMODE_5MHZ: Quarter rate + * @AR5K_BWMODE_10MHZ: Half rate + * @AR5K_BWMODE_40MHZ: Turbo + */ +enum ath5k_bw_mode { + AR5K_BWMODE_DEFAULT = 0, + AR5K_BWMODE_5MHZ = 1, + AR5K_BWMODE_10MHZ = 2, + AR5K_BWMODE_40MHZ = 3 +}; + + + +/****************\ + TX DEFINITIONS +\****************/ + +/** + * struct ath5k_tx_status - TX Status descriptor + * @ts_seqnum: Sequence number + * @ts_tstamp: Timestamp + * @ts_status: Status code + * @ts_final_idx: Final transmission series index + * @ts_final_retry: Final retry count + * @ts_rssi: RSSI for received ACK + * @ts_shortretry: Short retry count + * @ts_virtcol: Virtual collision count + * @ts_antenna: Antenna used + * + * TX status descriptor gets filled by the hw + * on each transmission attempt. + */ +struct ath5k_tx_status { + u16 ts_seqnum; + u16 ts_tstamp; + u8 ts_status; + u8 ts_final_idx; + u8 ts_final_retry; + s8 ts_rssi; + u8 ts_shortretry; + u8 ts_virtcol; + u8 ts_antenna; +}; + +#define AR5K_TXSTAT_ALTRATE 0x80 +#define AR5K_TXERR_XRETRY 0x01 +#define AR5K_TXERR_FILT 0x02 +#define AR5K_TXERR_FIFO 0x04 + +/** + * enum ath5k_tx_queue - Queue types used to classify tx queues. + * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue + * @AR5K_TX_QUEUE_DATA: A normal data queue + * @AR5K_TX_QUEUE_BEACON: The beacon queue + * @AR5K_TX_QUEUE_CAB: The after-beacon queue + * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue + */ +enum ath5k_tx_queue { + AR5K_TX_QUEUE_INACTIVE = 0, + AR5K_TX_QUEUE_DATA, + AR5K_TX_QUEUE_BEACON, + AR5K_TX_QUEUE_CAB, + AR5K_TX_QUEUE_UAPSD, +}; + +#define AR5K_NUM_TX_QUEUES 10 +#define AR5K_NUM_TX_QUEUES_NOQCU 2 + +/** + * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues + * @AR5K_WME_AC_BK: Background traffic + * @AR5K_WME_AC_BE: Best-effort (normal) traffic + * @AR5K_WME_AC_VI: Video traffic + * @AR5K_WME_AC_VO: Voice traffic + * + * These are the 4 Access Categories as defined in + * WME spec. 0 is the lowest priority and 4 is the + * highest. Normal data that hasn't been classified + * goes to the Best Effort AC. + */ +enum ath5k_tx_queue_subtype { + AR5K_WME_AC_BK = 0, + AR5K_WME_AC_BE, + AR5K_WME_AC_VI, + AR5K_WME_AC_VO, +}; + +/** + * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions + * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available) + * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index + * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index + * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue + * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue + * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery, + * + * Each number represents a hw queue. If hw does not support hw queues + * (eg 5210) all data goes in one queue. + */ +enum ath5k_tx_queue_id { + AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, + AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, + AR5K_TX_QUEUE_ID_DATA_MIN = 0, + AR5K_TX_QUEUE_ID_DATA_MAX = 3, + AR5K_TX_QUEUE_ID_UAPSD = 7, + AR5K_TX_QUEUE_ID_CAB = 8, + AR5K_TX_QUEUE_ID_BEACON = 9, +}; + +/* + * Flags to set hw queue's parameters... + */ +#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ +#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ +#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ +#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ +#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ +#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ +#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ +#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ +#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ +#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ +#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ +#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ + +/** + * struct ath5k_txq - Transmit queue state + * @qnum: Hardware q number + * @link: Link ptr in last TX desc + * @q: Transmit queue (&struct list_head) + * @lock: Lock on q and link + * @setup: Is the queue configured + * @txq_len:Number of queued buffers + * @txq_max: Max allowed num of queued buffers + * @txq_poll_mark: Used to check if queue got stuck + * @txq_stuck: Queue stuck counter + * + * One of these exists for each hardware transmit queue. + * Packets sent to us from above are assigned to queues based + * on their priority. Not all devices support a complete set + * of hardware transmit queues. For those devices the array + * sc_ac2q will map multiple priorities to fewer hardware queues + * (typically all to one hardware queue). + */ +struct ath5k_txq { + unsigned int qnum; + u32 *link; + struct list_head q; + spinlock_t lock; + bool setup; + int txq_len; + int txq_max; + bool txq_poll_mark; + unsigned int txq_stuck; +}; + +/** + * struct ath5k_txq_info - A struct to hold TX queue's parameters + * @tqi_type: One of enum ath5k_tx_queue + * @tqi_subtype: One of enum ath5k_tx_queue_subtype + * @tqi_flags: TX queue flags (see above) + * @tqi_aifs: Arbitrated Inter-frame Space + * @tqi_cw_min: Minimum Contention Window + * @tqi_cw_max: Maximum Contention Window + * @tqi_cbr_period: Constant bit rate period + * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled + */ +struct ath5k_txq_info { + enum ath5k_tx_queue tqi_type; + enum ath5k_tx_queue_subtype tqi_subtype; + u16 tqi_flags; + u8 tqi_aifs; + u16 tqi_cw_min; + u16 tqi_cw_max; + u32 tqi_cbr_period; + u32 tqi_cbr_overflow_limit; + u32 tqi_burst_time; + u32 tqi_ready_time; +}; + +/** + * enum ath5k_pkt_type - Transmit packet types + * @AR5K_PKT_TYPE_NORMAL: Normal data + * @AR5K_PKT_TYPE_ATIM: ATIM + * @AR5K_PKT_TYPE_PSPOLL: PS-Poll + * @AR5K_PKT_TYPE_BEACON: Beacon + * @AR5K_PKT_TYPE_PROBE_RESP: Probe response + * @AR5K_PKT_TYPE_PIFS: PIFS + * Used on tx control descriptor + */ +enum ath5k_pkt_type { + AR5K_PKT_TYPE_NORMAL = 0, + AR5K_PKT_TYPE_ATIM = 1, + AR5K_PKT_TYPE_PSPOLL = 2, + AR5K_PKT_TYPE_BEACON = 3, + AR5K_PKT_TYPE_PROBE_RESP = 4, + AR5K_PKT_TYPE_PIFS = 5, +}; + +/* + * TX power and TPC settings + */ +#define AR5K_TXPOWER_OFDM(_r, _v) ( \ + ((0 & 1) << ((_v) + 6)) | \ + (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ +) + +#define AR5K_TXPOWER_CCK(_r, _v) ( \ + (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ +) + + + +/****************\ + RX DEFINITIONS +\****************/ + +/** + * struct ath5k_rx_status - RX Status descriptor + * @rs_datalen: Data length + * @rs_tstamp: Timestamp + * @rs_status: Status code + * @rs_phyerr: PHY error mask + * @rs_rssi: RSSI in 0.5dbm units + * @rs_keyix: Index to the key used for decrypting + * @rs_rate: Rate used to decode the frame + * @rs_antenna: Antenna used to receive the frame + * @rs_more: Indicates this is a frame fragment (Fast frames) + */ +struct ath5k_rx_status { + u16 rs_datalen; + u16 rs_tstamp; + u8 rs_status; + u8 rs_phyerr; + s8 rs_rssi; + u8 rs_keyix; + u8 rs_rate; + u8 rs_antenna; + u8 rs_more; +}; + +#define AR5K_RXERR_CRC 0x01 +#define AR5K_RXERR_PHY 0x02 +#define AR5K_RXERR_FIFO 0x04 +#define AR5K_RXERR_DECRYPT 0x08 +#define AR5K_RXERR_MIC 0x10 +#define AR5K_RXKEYIX_INVALID ((u8) -1) +#define AR5K_TXKEYIX_INVALID ((u32) -1) + + +/**************************\ + BEACON TIMERS DEFINITIONS +\**************************/ + +#define AR5K_BEACON_PERIOD 0x0000ffff +#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ +#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ + + +/* + * TSF to TU conversion: + * + * TSF is a 64bit value in usec (microseconds). + * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of + * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). + */ +#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) + + + +/*******************************\ + GAIN OPTIMIZATION DEFINITIONS +\*******************************/ + +/** + * enum ath5k_rfgain - RF Gain optimization engine state + * @AR5K_RFGAIN_INACTIVE: Engine disabled + * @AR5K_RFGAIN_ACTIVE: Probe active + * @AR5K_RFGAIN_READ_REQUESTED: Probe requested + * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change + */ +enum ath5k_rfgain { + AR5K_RFGAIN_INACTIVE = 0, + AR5K_RFGAIN_ACTIVE, + AR5K_RFGAIN_READ_REQUESTED, + AR5K_RFGAIN_NEED_CHANGE, +}; + +/** + * struct ath5k_gain - RF Gain optimization engine state data + * @g_step_idx: Current step index + * @g_current: Current gain + * @g_target: Target gain + * @g_low: Low gain boundary + * @g_high: High gain boundary + * @g_f_corr: Gain_F correction + * @g_state: One of enum ath5k_rfgain + */ +struct ath5k_gain { + u8 g_step_idx; + u8 g_current; + u8 g_target; + u8 g_low; + u8 g_high; + u8 g_f_corr; + u8 g_state; +}; + + + +/********************\ + COMMON DEFINITIONS +\********************/ + +#define AR5K_SLOT_TIME_9 396 +#define AR5K_SLOT_TIME_20 880 +#define AR5K_SLOT_TIME_MAX 0xffff + +/** + * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111 + * @a2_flags: Channel flags (internal) + * @a2_athchan: HW channel number (internal) + * + * This structure is used to map 2GHz channels to + * 5GHz Atheros channels on 2111 frequency converter + * that comes together with RF5111 + * TODO: Clean up + */ +struct ath5k_athchan_2ghz { + u32 a2_flags; + u16 a2_athchan; +}; + +/** + * enum ath5k_dmasize - DMA size definitions (2^(n+2)) + * @AR5K_DMASIZE_4B: 4Bytes + * @AR5K_DMASIZE_8B: 8Bytes + * @AR5K_DMASIZE_16B: 16Bytes + * @AR5K_DMASIZE_32B: 32Bytes + * @AR5K_DMASIZE_64B: 64Bytes (Default) + * @AR5K_DMASIZE_128B: 128Bytes + * @AR5K_DMASIZE_256B: 256Bytes + * @AR5K_DMASIZE_512B: 512Bytes + * + * These are used to set DMA burst size on hw + * + * Note: Some platforms can't handle more than 4Bytes + * be careful on embedded boards. + */ +enum ath5k_dmasize { + AR5K_DMASIZE_4B = 0, + AR5K_DMASIZE_8B, + AR5K_DMASIZE_16B, + AR5K_DMASIZE_32B, + AR5K_DMASIZE_64B, + AR5K_DMASIZE_128B, + AR5K_DMASIZE_256B, + AR5K_DMASIZE_512B +}; + + + +/******************\ + RATE DEFINITIONS +\******************/ + +/** + * DOC: Rate codes + * + * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. + * + * The rate code is used to get the RX rate or set the TX rate on the + * hardware descriptors. It is also used for internal modulation control + * and settings. + * + * This is the hardware rate map we are aware of (html unfriendly): + * + * Rate code Rate (Kbps) + * --------- ----------- + * 0x01 3000 (XR) + * 0x02 1000 (XR) + * 0x03 250 (XR) + * 0x04 - 05 -Reserved- + * 0x06 2000 (XR) + * 0x07 500 (XR) + * 0x08 48000 (OFDM) + * 0x09 24000 (OFDM) + * 0x0A 12000 (OFDM) + * 0x0B 6000 (OFDM) + * 0x0C 54000 (OFDM) + * 0x0D 36000 (OFDM) + * 0x0E 18000 (OFDM) + * 0x0F 9000 (OFDM) + * 0x10 - 17 -Reserved- + * 0x18 11000L (CCK) + * 0x19 5500L (CCK) + * 0x1A 2000L (CCK) + * 0x1B 1000L (CCK) + * 0x1C 11000S (CCK) + * 0x1D 5500S (CCK) + * 0x1E 2000S (CCK) + * 0x1F -Reserved- + * + * "S" indicates CCK rates with short preamble and "L" with long preamble. + * + * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the + * lowest 4 bits, so they are the same as above with a 0xF mask. + * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). + * We handle this in ath5k_setup_bands(). + */ +#define AR5K_MAX_RATES 32 + +/* B */ +#define ATH5K_RATE_CODE_1M 0x1B +#define ATH5K_RATE_CODE_2M 0x1A +#define ATH5K_RATE_CODE_5_5M 0x19 +#define ATH5K_RATE_CODE_11M 0x18 +/* A and G */ +#define ATH5K_RATE_CODE_6M 0x0B +#define ATH5K_RATE_CODE_9M 0x0F +#define ATH5K_RATE_CODE_12M 0x0A +#define ATH5K_RATE_CODE_18M 0x0E +#define ATH5K_RATE_CODE_24M 0x09 +#define ATH5K_RATE_CODE_36M 0x0D +#define ATH5K_RATE_CODE_48M 0x08 +#define ATH5K_RATE_CODE_54M 0x0C + +/* Adding this flag to rate_code on B rates + * enables short preamble */ +#define AR5K_SET_SHORT_PREAMBLE 0x04 + +/* + * Crypto definitions + */ + +#define AR5K_KEYCACHE_SIZE 8 +extern bool ath5k_modparam_nohwcrypt; + +/***********************\ + HW RELATED DEFINITIONS +\***********************/ + +/* + * Misc definitions + */ +#define AR5K_RSSI_EP_MULTIPLIER (1 << 7) + +#define AR5K_ASSERT_ENTRY(_e, _s) do { \ + if (_e >= _s) \ + return false; \ +} while (0) + +/* + * Hardware interrupt abstraction + */ + +/** + * enum ath5k_int - Hardware interrupt masks helpers + * @AR5K_INT_RXOK: Frame successfully received + * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor + * @AR5K_INT_RXERR: Frame reception failed + * @AR5K_INT_RXNOFRM: No frame received within a specified time period + * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors + * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is + * not always fatal, on some chips we can continue operation + * without resetting the card, that's why %AR5K_INT_FATAL is not + * common for all chips. + * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts + * + * @AR5K_INT_TXOK: Frame transmission success + * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor + * @AR5K_INT_TXERR: Frame transmission failure + * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The + * Queue Control Unit (QCU) signals an EOL interrupt only if a + * descriptor's LinkPtr is NULL. For more details, refer to: + * "http://www.freepatentsonline.com/20030225739.html" + * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period + * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should + * increase the TX trigger threshold. + * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts + * + * @AR5K_INT_MIB: Indicates the either Management Information Base counters or + * one of the PHY error counters reached the maximum value and + * should be read and cleared. + * @AR5K_INT_SWI: Software triggered interrupt. + * @AR5K_INT_RXPHY: RX PHY Error + * @AR5K_INT_RXKCM: RX Key cache miss + * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a + * beacon that must be handled in software. The alternative is if + * you have VEOL support, in that case you let the hardware deal + * with things. + * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold + * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing + * beacons from the AP have associated with, we should probably + * try to reassociate. When in IBSS mode this might mean we have + * not received any beacons from any local stations. Note that + * every station in an IBSS schedules to send beacons at the + * Target Beacon Transmission Time (TBTT) with a random backoff. + * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty. + * @AR5K_INT_TIM: Beacon with local station's TIM bit set + * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received + * @AR5K_INT_DTIM_SYNC: DTIM sync lost + * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to + * our GPIO pins. + * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting + * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got + * nothing or an incomplete CAB frame sequence. + * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired + * @AR5K_INT_QCBRURN: A queue got triggered wile empty + * @AR5K_INT_QTRIG: A queue got triggered + * + * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA + * errors. Indicates we need to reset the card. + * @AR5K_INT_GLOBAL: Used to clear and set the IER + * @AR5K_INT_NOCARD: Signals the card has been removed + * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same + * bit value + * + * These are mapped to take advantage of some common bits + * between the MACs, to be able to set intr properties + * easier. Some of them are not used yet inside hw.c. Most map + * to the respective hw interrupt value as they are common among different + * MACs. + */ +enum ath5k_int { + AR5K_INT_RXOK = 0x00000001, + AR5K_INT_RXDESC = 0x00000002, + AR5K_INT_RXERR = 0x00000004, + AR5K_INT_RXNOFRM = 0x00000008, + AR5K_INT_RXEOL = 0x00000010, + AR5K_INT_RXORN = 0x00000020, + AR5K_INT_TXOK = 0x00000040, + AR5K_INT_TXDESC = 0x00000080, + AR5K_INT_TXERR = 0x00000100, + AR5K_INT_TXNOFRM = 0x00000200, + AR5K_INT_TXEOL = 0x00000400, + AR5K_INT_TXURN = 0x00000800, + AR5K_INT_MIB = 0x00001000, + AR5K_INT_SWI = 0x00002000, + AR5K_INT_RXPHY = 0x00004000, + AR5K_INT_RXKCM = 0x00008000, + AR5K_INT_SWBA = 0x00010000, + AR5K_INT_BRSSI = 0x00020000, + AR5K_INT_BMISS = 0x00040000, + AR5K_INT_FATAL = 0x00080000, /* Non common */ + AR5K_INT_BNR = 0x00100000, /* Non common */ + AR5K_INT_TIM = 0x00200000, /* Non common */ + AR5K_INT_DTIM = 0x00400000, /* Non common */ + AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ + AR5K_INT_GPIO = 0x01000000, + AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ + AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ + AR5K_INT_QCBRORN = 0x08000000, /* Non common */ + AR5K_INT_QCBRURN = 0x10000000, /* Non common */ + AR5K_INT_QTRIG = 0x20000000, /* Non common */ + AR5K_INT_GLOBAL = 0x80000000, + + AR5K_INT_TX_ALL = AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM + | AR5K_INT_TXEOL + | AR5K_INT_TXURN, + + AR5K_INT_RX_ALL = AR5K_INT_RXOK + | AR5K_INT_RXDESC + | AR5K_INT_RXERR + | AR5K_INT_RXNOFRM + | AR5K_INT_RXEOL + | AR5K_INT_RXORN, + + AR5K_INT_COMMON = AR5K_INT_RXOK + | AR5K_INT_RXDESC + | AR5K_INT_RXERR + | AR5K_INT_RXNOFRM + | AR5K_INT_RXEOL + | AR5K_INT_RXORN + | AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM + | AR5K_INT_TXEOL + | AR5K_INT_TXURN + | AR5K_INT_MIB + | AR5K_INT_SWI + | AR5K_INT_RXPHY + | AR5K_INT_RXKCM + | AR5K_INT_SWBA + | AR5K_INT_BRSSI + | AR5K_INT_BMISS + | AR5K_INT_GPIO + | AR5K_INT_GLOBAL, + + AR5K_INT_NOCARD = 0xffffffff +}; + +/** + * enum ath5k_calibration_mask - Mask which calibration is active at the moment + * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT) + * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q) + * @AR5K_CALIBRATION_NF: Noise Floor calibration + * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity + */ +enum ath5k_calibration_mask { + AR5K_CALIBRATION_FULL = 0x01, + AR5K_CALIBRATION_SHORT = 0x02, + AR5K_CALIBRATION_NF = 0x04, + AR5K_CALIBRATION_ANI = 0x08, +}; + +/** + * enum ath5k_power_mode - Power management modes + * @AR5K_PM_UNDEFINED: Undefined + * @AR5K_PM_AUTO: Allow card to sleep if possible + * @AR5K_PM_AWAKE: Force card to wake up + * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS) + * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration + * + * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO + * are also known to have problems on some cards. This is not a big + * problem though because we can have almost the same effect as + * FULL_SLEEP by putting card on warm reset (it's almost powered down). + */ +enum ath5k_power_mode { + AR5K_PM_UNDEFINED = 0, + AR5K_PM_AUTO, + AR5K_PM_AWAKE, + AR5K_PM_FULL_SLEEP, + AR5K_PM_NETWORK_SLEEP, +}; + +/* + * These match net80211 definitions (not used in + * mac80211). + * TODO: Clean this up + */ +#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ +#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ +#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ +#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ +#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ + +/* GPIO-controlled software LED */ +#define AR5K_SOFTLED_PIN 0 +#define AR5K_SOFTLED_ON 0 +#define AR5K_SOFTLED_OFF 1 + + +/* XXX: we *may* move cap_range stuff to struct wiphy */ +struct ath5k_capabilities { + /* + * Supported PHY modes + * (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...) + */ + DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); + + /* + * Frequency range (without regulation restrictions) + */ + struct { + u16 range_2ghz_min; + u16 range_2ghz_max; + u16 range_5ghz_min; + u16 range_5ghz_max; + } cap_range; + + /* + * Values stored in the EEPROM (some of them...) + */ + struct ath5k_eeprom_info cap_eeprom; + + /* + * Queue information + */ + struct { + u8 q_tx_num; + } cap_queues; + + bool cap_has_phyerr_counters; + bool cap_has_mrr_support; + bool cap_needs_2GHz_ovr; +}; + +/* size of noise floor history (keep it a power of two) */ +#define ATH5K_NF_CAL_HIST_MAX 8 +struct ath5k_nfcal_hist { + s16 index; /* current index into nfval */ + s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ +}; + +#define ATH5K_LED_MAX_NAME_LEN 31 + +/* + * State for LED triggers + */ +struct ath5k_led { + char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ + struct ath5k_hw *ah; /* driver state */ + struct led_classdev led_dev; /* led classdev */ +}; + +/* Rfkill */ +struct ath5k_rfkill { + /* GPIO PIN for rfkill */ + u16 gpio; + /* polarity of rfkill GPIO PIN */ + bool polarity; + /* RFKILL toggle tasklet */ + struct tasklet_struct toggleq; +}; + +/* statistics */ +struct ath5k_statistics { + /* antenna use */ + unsigned int antenna_rx[5]; /* frames count per antenna RX */ + unsigned int antenna_tx[5]; /* frames count per antenna TX */ + + /* frame errors */ + unsigned int rx_all_count; /* all RX frames, including errors */ + unsigned int tx_all_count; /* all TX frames, including errors */ + unsigned int rx_bytes_count; /* all RX bytes, including errored pkts + * and the MAC headers for each packet + */ + unsigned int tx_bytes_count; /* all TX bytes, including errored pkts + * and the MAC headers and padding for + * each packet. + */ + unsigned int rxerr_crc; + unsigned int rxerr_phy; + unsigned int rxerr_phy_code[32]; + unsigned int rxerr_fifo; + unsigned int rxerr_decrypt; + unsigned int rxerr_mic; + unsigned int rxerr_proc; + unsigned int rxerr_jumbo; + unsigned int txerr_retry; + unsigned int txerr_fifo; + unsigned int txerr_filt; + + /* MIB counters */ + unsigned int ack_fail; + unsigned int rts_fail; + unsigned int rts_ok; + unsigned int fcs_error; + unsigned int beacons; + + unsigned int mib_intr; + unsigned int rxorn_intr; + unsigned int rxeol_intr; +}; + +/* + * Misc defines + */ + +#define AR5K_MAX_GPIO 10 +#define AR5K_MAX_RF_BANKS 8 + +#if CHAN_DEBUG +#define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200) +#else +#define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20) +#endif + +#define ATH_RXBUF 40 /* number of RX buffers */ +#define ATH_TXBUF 200 /* number of TX buffers */ +#define ATH_BCBUF 4 /* number of beacon buffers */ +#define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ +#define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ + +DECLARE_EWMA(beacon_rssi, 10, 8) + +/* Driver state associated with an instance of a device */ +struct ath5k_hw { + struct ath_common common; + + struct pci_dev *pdev; + struct device *dev; /* for dma mapping */ + int irq; + u16 devid; + void __iomem *iobase; /* address of the device */ + struct mutex lock; /* dev-level lock */ + struct ieee80211_hw *hw; /* IEEE 802.11 common */ + struct ieee80211_supported_band sbands[NUM_NL80211_BANDS]; + struct ieee80211_channel channels[ATH_CHAN_MAX]; + struct ieee80211_rate rates[NUM_NL80211_BANDS][AR5K_MAX_RATES]; + s8 rate_idx[NUM_NL80211_BANDS][AR5K_MAX_RATES]; + enum nl80211_iftype opmode; + +#ifdef CONFIG_ATH5K_DEBUG + struct ath5k_dbg_info debug; /* debug info */ +#endif /* CONFIG_ATH5K_DEBUG */ + + struct ath5k_buf *bufptr; /* allocated buffer ptr */ + struct ath5k_desc *desc; /* TX/RX descriptors */ + dma_addr_t desc_daddr; /* DMA (physical) address */ + size_t desc_len; /* size of TX/RX descriptors */ + + DECLARE_BITMAP(status, 4); +#define ATH_STAT_INVALID 0 /* disable hardware accesses */ +#define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ +#define ATH_STAT_STARTED 3 /* opened & irqs enabled */ +#define ATH_STAT_RESET 4 /* hw reset */ + + unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ + unsigned int fif_filter_flags; /* Current FIF_* filter flags */ + struct ieee80211_channel *curchan; /* current h/w channel */ + + u16 nvifs; + + enum ath5k_int imask; /* interrupt mask copy */ + + spinlock_t irqlock; + bool rx_pending; /* rx tasklet pending */ + bool tx_pending; /* tx tasklet pending */ + + u8 bssidmask[ETH_ALEN]; + + unsigned int led_pin, /* GPIO pin for driving LED */ + led_on; /* pin setting for LED on */ + + struct work_struct reset_work; /* deferred chip reset */ + struct work_struct calib_work; /* deferred phy calibration */ + + struct list_head rxbuf; /* receive buffer */ + spinlock_t rxbuflock; + u32 *rxlink; /* link ptr in last RX desc */ + struct tasklet_struct rxtq; /* rx intr tasklet */ + struct ath5k_led rx_led; /* rx led */ + + struct list_head txbuf; /* transmit buffer */ + spinlock_t txbuflock; + unsigned int txbuf_len; /* buf count in txbuf list */ + struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ + struct tasklet_struct txtq; /* tx intr tasklet */ + struct ath5k_led tx_led; /* tx led */ + + struct ath5k_rfkill rf_kill; + + spinlock_t block; /* protects beacon */ + struct tasklet_struct beacontq; /* beacon intr tasklet */ + struct list_head bcbuf; /* beacon buffer */ + struct ieee80211_vif *bslot[ATH_BCBUF]; + u16 num_ap_vifs; + u16 num_adhoc_vifs; + u16 num_mesh_vifs; + unsigned int bhalq, /* SW q for outgoing beacons */ + bmisscount, /* missed beacon transmits */ + bintval, /* beacon interval in TU */ + bsent; + unsigned int nexttbtt; /* next beacon time in TU */ + struct ath5k_txq *cabq; /* content after beacon */ + + bool assoc; /* associate state */ + bool enable_beacon; /* true if beacons are on */ + + struct ath5k_statistics stats; + + struct ath5k_ani_state ani_state; + struct tasklet_struct ani_tasklet; /* ANI calibration */ + + struct delayed_work tx_complete_work; + + struct survey_info survey; /* collected survey info */ + + enum ath5k_int ah_imr; + + struct ieee80211_channel *ah_current_channel; + bool ah_iq_cal_needed; + bool ah_single_chip; + + enum ath5k_version ah_version; + enum ath5k_radio ah_radio; + u32 ah_mac_srev; + u16 ah_mac_version; + u16 ah_phy_revision; + u16 ah_radio_5ghz_revision; + u16 ah_radio_2ghz_revision; + +#define ah_modes ah_capabilities.cap_mode +#define ah_ee_version ah_capabilities.cap_eeprom.ee_version + + u8 ah_retry_long; + u8 ah_retry_short; + + bool ah_use_32khz_clock; + + u8 ah_coverage_class; + bool ah_ack_bitrate_high; + u8 ah_bwmode; + bool ah_short_slot; + + /* Antenna Control */ + u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; + u8 ah_ant_mode; + u8 ah_tx_ant; + u8 ah_def_ant; + + struct ath5k_capabilities ah_capabilities; + + struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; + u32 ah_txq_status; + u32 ah_txq_imr_txok; + u32 ah_txq_imr_txerr; + u32 ah_txq_imr_txurn; + u32 ah_txq_imr_txdesc; + u32 ah_txq_imr_txeol; + u32 ah_txq_imr_cbrorn; + u32 ah_txq_imr_cbrurn; + u32 ah_txq_imr_qtrig; + u32 ah_txq_imr_nofrm; + + u32 ah_txq_isr_txok_all; + + u32 *ah_rf_banks; + size_t ah_rf_banks_size; + size_t ah_rf_regs_count; + struct ath5k_gain ah_gain; + u8 ah_offset[AR5K_MAX_RF_BANKS]; + + + struct { + /* Temporary tables used for interpolation */ + u8 tmpL[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 tmpR[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; + u16 txp_rates_power_table[AR5K_MAX_RATES]; + u8 txp_min_idx; + bool txp_tpc; + /* Values in 0.25dB units */ + s16 txp_min_pwr; + s16 txp_max_pwr; + s16 txp_cur_pwr; + /* Values in 0.5dB units */ + s16 txp_offset; + s16 txp_ofdm; + s16 txp_cck_ofdm_gainf_delta; + /* Value in dB units */ + s16 txp_cck_ofdm_pwr_delta; + bool txp_setup; + int txp_requested; /* Requested tx power in dBm */ + } ah_txpower; + + struct ath5k_nfcal_hist ah_nfcal_hist; + + /* average beacon RSSI in our BSS (used by ANI) */ + struct ewma_beacon_rssi ah_beacon_rssi_avg; + + /* noise floor from last periodic calibration */ + s32 ah_noise_floor; + + /* Calibration timestamp */ + unsigned long ah_cal_next_full; + unsigned long ah_cal_next_short; + unsigned long ah_cal_next_ani; + + /* Calibration mask */ + u8 ah_cal_mask; + + /* + * Function pointers + */ + int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, int, enum ath5k_pkt_type, + unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int, unsigned int); + int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + struct ath5k_tx_status *); + int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, + struct ath5k_rx_status *); +}; + +struct ath_bus_ops { + enum ath_bus_type ath_bus_type; + void (*read_cachesize)(struct ath_common *common, int *csz); + bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data); + int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac); +}; + +/* + * Prototypes + */ +extern const struct ieee80211_ops ath5k_hw_ops; + +/* Initialization and detach functions */ +int ath5k_hw_init(struct ath5k_hw *ah); +void ath5k_hw_deinit(struct ath5k_hw *ah); + +int ath5k_sysfs_register(struct ath5k_hw *ah); +void ath5k_sysfs_unregister(struct ath5k_hw *ah); + +/*Chip id helper functions */ +int ath5k_hw_read_srev(struct ath5k_hw *ah); + +/* LED functions */ +int ath5k_init_leds(struct ath5k_hw *ah); +void ath5k_led_enable(struct ath5k_hw *ah); +void ath5k_led_off(struct ath5k_hw *ah); +void ath5k_unregister_leds(struct ath5k_hw *ah); + + +/* Reset Functions */ +int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel); +int ath5k_hw_on_hold(struct ath5k_hw *ah); +int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, + struct ieee80211_channel *channel, bool fast, bool skip_pcu); +int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, + bool is_set); +/* Power management functions */ + + +/* Clock rate related functions */ +unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); +unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); +void ath5k_hw_set_clockrate(struct ath5k_hw *ah); + + +/* DMA Related Functions */ +void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); +u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); +int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); +int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue); +u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, + u32 phys_addr); +int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); +/* Interrupt handling */ +bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); +int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); +enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); +void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); +/* Init/Stop functions */ +void ath5k_hw_dma_init(struct ath5k_hw *ah); +int ath5k_hw_dma_stop(struct ath5k_hw *ah); + +/* EEPROM access functions */ +int ath5k_eeprom_init(struct ath5k_hw *ah); +void ath5k_eeprom_detach(struct ath5k_hw *ah); +int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel); + +/* Protocol Control Unit Functions */ +/* Helpers */ +int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum nl80211_band band, + int len, struct ieee80211_rate *rate, bool shortpre); +unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah); +unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah); +int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); +void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); +/* RX filter control*/ +int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); +void ath5k_hw_set_bssid(struct ath5k_hw *ah); +void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); +void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); +u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); +void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); +/* Receive (DRU) start/stop functions */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); +/* Beacon control functions */ +u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); +void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); +void ath5k_hw_reset_tsf(struct ath5k_hw *ah); +void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, + u32 interval); +bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); +/* Init function */ +void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode); + +/* Queue Control Unit, DFS Control Unit Functions */ +int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, + struct ath5k_txq_info *queue_info); +int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info); +int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, + enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info); +void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, + unsigned int queue); +u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); +void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); +int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time); +/* Init function */ +int ath5k_hw_init_queues(struct ath5k_hw *ah); + +/* Hardware Descriptor Functions */ +int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); +int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags); +int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, + u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); + + +/* GPIO Functions */ +void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); +int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); +int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); +u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); +int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); +void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, + u32 interrupt_level); + + +/* RFkill Functions */ +void ath5k_rfkill_hw_start(struct ath5k_hw *ah); +void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); + + +/* Misc functions TODO: Cleanup */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah); +int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); +int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); + + +/* Initial register settings functions */ +int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); + + +/* PHY functions */ +/* Misc PHY functions */ +u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum nl80211_band band); +int ath5k_hw_phy_disable(struct ath5k_hw *ah); +/* Gain_F optimization */ +enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); +int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); +/* PHY/RF channel functions */ +bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel); +/* PHY calibration */ +void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); +int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, + struct ieee80211_channel *channel); +void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); +/* Spur mitigation */ +bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, + struct ieee80211_channel *channel); +/* Antenna control */ +void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); +void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); +/* TX power setup */ +int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); +/* Init function */ +int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 mode, bool fast); + +/* + * Functions used internally + */ + +static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) +{ + return &ah->common; +} + +static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) +{ + return &(ath5k_hw_common(ah)->regulatory); +} + +#ifdef CONFIG_ATH5K_AHB +#define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000) + +static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) +{ + /* On AR2315 and AR2317 the PCI clock domain registers + * are outside of the WMAC register space */ + if (unlikely((reg >= 0x4000) && (reg < 0x5000) && + (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) + return AR5K_AR2315_PCI_BASE + reg; + + return ah->iobase + reg; +} + +static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) +{ + return ioread32(ath5k_ahb_reg(ah, reg)); +} + +static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) +{ + iowrite32(val, ath5k_ahb_reg(ah, reg)); +} + +#else + +static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) +{ + return ioread32(ah->iobase + reg); +} + +static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) +{ + iowrite32(val, ah->iobase + reg); +} + +#endif + +static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah) +{ + return ath5k_hw_common(ah)->bus_ops->ath_bus_type; +} + +static inline void ath5k_read_cachesize(struct ath_common *common, int *csz) +{ + common->bus_ops->read_cachesize(common, csz); +} + +static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data) +{ + struct ath_common *common = ath5k_hw_common(ah); + return common->bus_ops->eeprom_read(common, off, data); +} + +static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) +{ + u32 retval = 0, bit, i; + + for (i = 0; i < bits; i++) { + bit = (val >> i) & 1; + retval = (retval << 1) | bit; + } + + return retval; +} + +#endif diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c new file mode 100644 index 000000000..12d3a6c92 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -0,0 +1,359 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* Attach/Detach Functions and helpers * +\*************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/pci.h> +#include <linux/slab.h> +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + +/** + * ath5k_hw_post() - Power On Self Test helper function + * @ah: The &struct ath5k_hw + */ +static int ath5k_hw_post(struct ath5k_hw *ah) +{ + + static const u32 static_pattern[4] = { + 0x55555555, 0xaaaaaaaa, + 0x66666666, 0x99999999 + }; + static const u16 regs[2] = { AR5K_STA_ID0, AR5K_PHY(8) }; + int i, c; + u16 cur_reg; + u32 var_pattern; + u32 init_val; + u32 cur_val; + + for (c = 0; c < 2; c++) { + + cur_reg = regs[c]; + + /* Save previous value */ + init_val = ath5k_hw_reg_read(ah, cur_reg); + + for (i = 0; i < 256; i++) { + var_pattern = i << 16 | i; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + ATH5K_ERR(ah, "POST Failed !!!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x0039080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + for (i = 0; i < 4; i++) { + var_pattern = static_pattern[i]; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + ATH5K_ERR(ah, "POST Failed !!!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x003b080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + /* Restore previous value */ + ath5k_hw_reg_write(ah, init_val, cur_reg); + + } + + return 0; + +} + +/** + * ath5k_hw_init() - Check if hw is supported and init the needed structs + * @ah: The &struct ath5k_hw associated with the device + * + * Check if the device is supported, perform a POST and initialize the needed + * structs. Returns -ENOMEM if we don't have memory for the needed structs, + * -ENODEV if the device is not supported or prints an error msg if something + * else went wrong. + */ +int ath5k_hw_init(struct ath5k_hw *ah) +{ + static const u8 zero_mac[ETH_ALEN] = { }; + struct ath_common *common = ath5k_hw_common(ah); + struct pci_dev *pdev = ah->pdev; + struct ath5k_eeprom_info *ee; + int ret; + u32 srev; + + /* + * HW information + */ + ah->ah_bwmode = AR5K_BWMODE_DEFAULT; + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_imr = 0; + ah->ah_retry_short = AR5K_INIT_RETRY_SHORT; + ah->ah_retry_long = AR5K_INIT_RETRY_LONG; + ah->ah_ant_mode = AR5K_ANTMODE_DEFAULT; + ah->ah_noise_floor = -95; /* until first NF calibration is run */ + ah->ani_state.ani_mode = ATH5K_ANI_MODE_AUTO; + ah->ah_current_channel = &ah->channels[0]; + + /* + * Find the mac version + */ + ath5k_hw_read_srev(ah); + srev = ah->ah_mac_srev; + if (srev < AR5K_SREV_AR5311) + ah->ah_version = AR5K_AR5210; + else if (srev < AR5K_SREV_AR5212) + ah->ah_version = AR5K_AR5211; + else + ah->ah_version = AR5K_AR5212; + + /* Get the MAC version */ + ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); + + /* Fill the ath5k_hw struct with the needed functions */ + ret = ath5k_hw_init_desc_functions(ah); + if (ret) + goto err; + + /* Bring device out of sleep and reset its units */ + ret = ath5k_hw_nic_wakeup(ah, NULL); + if (ret) + goto err; + + /* Get PHY and RADIO revisions */ + ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & + 0xffffffff; + ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, + NL80211_BAND_5GHZ); + + /* Try to identify radio chip based on its srev */ + switch (ah->ah_radio_5ghz_revision & 0xf0) { + case AR5K_SREV_RAD_5111: + ah->ah_radio = AR5K_RF5111; + ah->ah_single_chip = false; + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + NL80211_BAND_2GHZ); + break; + case AR5K_SREV_RAD_5112: + case AR5K_SREV_RAD_2112: + ah->ah_radio = AR5K_RF5112; + ah->ah_single_chip = false; + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + NL80211_BAND_2GHZ); + break; + case AR5K_SREV_RAD_2413: + ah->ah_radio = AR5K_RF2413; + ah->ah_single_chip = true; + break; + case AR5K_SREV_RAD_5413: + ah->ah_radio = AR5K_RF5413; + ah->ah_single_chip = true; + break; + case AR5K_SREV_RAD_2316: + ah->ah_radio = AR5K_RF2316; + ah->ah_single_chip = true; + break; + case AR5K_SREV_RAD_2317: + ah->ah_radio = AR5K_RF2317; + ah->ah_single_chip = true; + break; + case AR5K_SREV_RAD_5424: + if (ah->ah_mac_version == AR5K_SREV_AR2425 || + ah->ah_mac_version == AR5K_SREV_AR2417) { + ah->ah_radio = AR5K_RF2425; + ah->ah_single_chip = true; + } else { + ah->ah_radio = AR5K_RF5413; + ah->ah_single_chip = true; + } + break; + default: + /* Identify radio based on mac/phy srev */ + if (ah->ah_version == AR5K_AR5210) { + ah->ah_radio = AR5K_RF5110; + ah->ah_single_chip = false; + } else if (ah->ah_version == AR5K_AR5211) { + ah->ah_radio = AR5K_RF5111; + ah->ah_single_chip = false; + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + NL80211_BAND_2GHZ); + } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) || + ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_2425) { + ah->ah_radio = AR5K_RF2425; + ah->ah_single_chip = true; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425; + } else if (srev == AR5K_SREV_AR5213A && + ah->ah_phy_revision == AR5K_SREV_PHY_5212B) { + ah->ah_radio = AR5K_RF5112; + ah->ah_single_chip = false; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5112B; + } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4) || + ah->ah_mac_version == (AR5K_SREV_AR2315_R6 >> 4)) { + ah->ah_radio = AR5K_RF2316; + ah->ah_single_chip = true; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316; + } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_5413) { + ah->ah_radio = AR5K_RF5413; + ah->ah_single_chip = true; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413; + } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_2413) { + ah->ah_radio = AR5K_RF2413; + ah->ah_single_chip = true; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413; + } else { + ATH5K_ERR(ah, "Couldn't identify radio revision.\n"); + ret = -ENODEV; + goto err; + } + } + + + /* Return on unsupported chips (unsupported eeprom etc) */ + if ((srev >= AR5K_SREV_AR5416) && (srev < AR5K_SREV_AR2425)) { + ATH5K_ERR(ah, "Device not yet supported.\n"); + ret = -ENODEV; + goto err; + } + + /* + * POST + */ + ret = ath5k_hw_post(ah); + if (ret) + goto err; + + /* Enable pci core retry fix on Hainan (5213A) and later chips */ + if (srev >= AR5K_SREV_AR5213A) + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_RETRY_FIX); + + /* + * Get card capabilities, calibration values etc + * TODO: EEPROM work + */ + ret = ath5k_eeprom_init(ah); + if (ret) { + ATH5K_ERR(ah, "unable to init EEPROM\n"); + goto err; + } + + ee = &ah->ah_capabilities.cap_eeprom; + + /* + * Write PCI-E power save settings + */ + if ((ah->ah_version == AR5K_AR5212) && pdev && (pci_is_pcie(pdev))) { + ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES); + + /* Shut off RX when elecidle is asserted */ + ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES); + + /* If serdes programming is enabled, increase PCI-E + * tx power for systems with long trace from host + * to minicard connector. */ + if (ee->ee_serdes) + ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES); + else + ath5k_hw_reg_write(ah, 0xf6800579, AR5K_PCIE_SERDES); + + /* Shut off PLL and CLKREQ active in L1 */ + ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES); + + /* Preserve other settings */ + ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES); + + /* Reset SERDES to load new settings */ + ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET); + usleep_range(1000, 1500); + } + + /* Get misc capabilities */ + ret = ath5k_hw_set_capabilities(ah); + if (ret) { + ATH5K_ERR(ah, "unable to get device capabilities\n"); + goto err; + } + + /* Crypto settings */ + common->keymax = (ah->ah_version == AR5K_AR5210 ? + AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211); + + if (srev >= AR5K_SREV_AR5212_V4 && + (ee->ee_version < AR5K_EEPROM_VERSION_5_0 || + !AR5K_EEPROM_AES_DIS(ee->ee_misc5))) + common->crypt_caps |= ATH_CRYPT_CAP_CIPHER_AESCCM; + + if (srev >= AR5K_SREV_AR2414) { + common->crypt_caps |= ATH_CRYPT_CAP_MIC_COMBINED; + AR5K_REG_ENABLE_BITS(ah, AR5K_MISC_MODE, + AR5K_MISC_MODE_COMBINED_MIC); + } + + /* MAC address is cleared until add_interface */ + ath5k_hw_set_lladdr(ah, zero_mac); + + /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ + eth_broadcast_addr(common->curbssid); + ath5k_hw_set_bssid(ah); + ath5k_hw_set_opmode(ah, ah->opmode); + + ath5k_hw_rfgain_opt_init(ah); + + ath5k_hw_init_nfcal_hist(ah); + + /* turn on HW LEDs */ + ath5k_hw_set_ledstate(ah, AR5K_LED_INIT); + + return 0; +err: + return ret; +} + +/** + * ath5k_hw_deinit() - Free the &struct ath5k_hw + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_deinit(struct ath5k_hw *ah) +{ + __set_bit(ATH_STAT_INVALID, ah->status); + + kfree(ah->ah_rf_banks); + + ath5k_eeprom_detach(ah); + + /* assume interrupts are down */ +} diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c new file mode 100644 index 000000000..c59c14483 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -0,0 +1,3248 @@ +/*- + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2006 Devicescape Software, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/hardirq.h> +#include <linux/if.h> +#include <linux/io.h> +#include <linux/netdevice.h> +#include <linux/cache.h> +#include <linux/ethtool.h> +#include <linux/uaccess.h> +#include <linux/slab.h> +#include <linux/etherdevice.h> +#include <linux/nl80211.h> + +#include <net/cfg80211.h> +#include <net/ieee80211_radiotap.h> + +#include <asm/unaligned.h> + +#include <net/mac80211.h> +#include "base.h" +#include "reg.h" +#include "debug.h" +#include "ani.h" +#include "ath5k.h" +#include "../regd.h" + +#define CREATE_TRACE_POINTS +#include "trace.h" + +bool ath5k_modparam_nohwcrypt; +module_param_named(nohwcrypt, ath5k_modparam_nohwcrypt, bool, 0444); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +static bool modparam_fastchanswitch; +module_param_named(fastchanswitch, modparam_fastchanswitch, bool, 0444); +MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios."); + +static bool ath5k_modparam_no_hw_rfkill_switch; +module_param_named(no_hw_rfkill_switch, ath5k_modparam_no_hw_rfkill_switch, + bool, 0444); +MODULE_PARM_DESC(no_hw_rfkill_switch, "Ignore the GPIO RFKill switch state"); + + +/* Module info */ +MODULE_AUTHOR("Jiri Slaby"); +MODULE_AUTHOR("Nick Kossifidis"); +MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards."); +MODULE_LICENSE("Dual BSD/GPL"); + +static int ath5k_init(struct ieee80211_hw *hw); +static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan, + bool skip_pcu); + +/* Known SREVs */ +static const struct ath5k_srev_name srev_names[] = { +#ifdef CONFIG_ATH5K_AHB + { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R2 }, + { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R7 }, + { "2313", AR5K_VERSION_MAC, AR5K_SREV_AR2313_R8 }, + { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R6 }, + { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R7 }, + { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R1 }, + { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R2 }, +#else + { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 }, + { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 }, + { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A }, + { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B }, + { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 }, + { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 }, + { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 }, + { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A }, + { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 }, + { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 }, + { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 }, + { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 }, + { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 }, + { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 }, + { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 }, + { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 }, + { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 }, + { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 }, +#endif + { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN }, + { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 }, + { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 }, + { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A }, + { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 }, + { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 }, + { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A }, + { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B }, + { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 }, + { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A }, + { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B }, + { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 }, + { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 }, + { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 }, + { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 }, +#ifdef CONFIG_ATH5K_AHB + { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 }, + { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 }, +#endif + { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, +}; + +static const struct ieee80211_rate ath5k_rates[] = { + { .bitrate = 10, + .hw_value = ATH5K_RATE_CODE_1M, }, + { .bitrate = 20, + .hw_value = ATH5K_RATE_CODE_2M, + .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = ATH5K_RATE_CODE_5_5M, + .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = ATH5K_RATE_CODE_11M, + .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = ATH5K_RATE_CODE_6M, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, + { .bitrate = 90, + .hw_value = ATH5K_RATE_CODE_9M, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, + { .bitrate = 120, + .hw_value = ATH5K_RATE_CODE_12M, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, + { .bitrate = 180, + .hw_value = ATH5K_RATE_CODE_18M, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, + { .bitrate = 240, + .hw_value = ATH5K_RATE_CODE_24M, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, + { .bitrate = 360, + .hw_value = ATH5K_RATE_CODE_36M, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, + { .bitrate = 480, + .hw_value = ATH5K_RATE_CODE_48M, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, + { .bitrate = 540, + .hw_value = ATH5K_RATE_CODE_54M, + .flags = IEEE80211_RATE_SUPPORTS_5MHZ | + IEEE80211_RATE_SUPPORTS_10MHZ }, +}; + +static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) +{ + u64 tsf = ath5k_hw_get_tsf64(ah); + + if ((tsf & 0x7fff) < rstamp) + tsf -= 0x8000; + + return (tsf & ~0x7fff) | rstamp; +} + +const char * +ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val) +{ + const char *name = "xxxxx"; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(srev_names); i++) { + if (srev_names[i].sr_type != type) + continue; + + if ((val & 0xf0) == srev_names[i].sr_val) + name = srev_names[i].sr_name; + + if ((val & 0xff) == srev_names[i].sr_val) { + name = srev_names[i].sr_name; + break; + } + } + + return name; +} +static unsigned int ath5k_ioread32(void *hw_priv, u32 reg_offset) +{ + struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv; + return ath5k_hw_reg_read(ah, reg_offset); +} + +static void ath5k_iowrite32(void *hw_priv, u32 val, u32 reg_offset) +{ + struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv; + ath5k_hw_reg_write(ah, val, reg_offset); +} + +static const struct ath_ops ath5k_common_ops = { + .read = ath5k_ioread32, + .write = ath5k_iowrite32, +}; + +/***********************\ +* Driver Initialization * +\***********************/ + +static void ath5k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) +{ + struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); + struct ath5k_hw *ah = hw->priv; + struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); + + ath_reg_notifier_apply(wiphy, request, regulatory); +} + +/********************\ +* Channel/mode setup * +\********************/ + +/* + * Returns true for the channel numbers used. + */ +#ifdef CONFIG_ATH5K_TEST_CHANNELS +static bool ath5k_is_standard_channel(short chan, enum nl80211_band band) +{ + return true; +} + +#else +static bool ath5k_is_standard_channel(short chan, enum nl80211_band band) +{ + if (band == NL80211_BAND_2GHZ && chan <= 14) + return true; + + return /* UNII 1,2 */ + (((chan & 3) == 0 && chan >= 36 && chan <= 64) || + /* midband */ + ((chan & 3) == 0 && chan >= 100 && chan <= 140) || + /* UNII-3 */ + ((chan & 3) == 1 && chan >= 149 && chan <= 165) || + /* 802.11j 5.030-5.080 GHz (20MHz) */ + (chan == 8 || chan == 12 || chan == 16) || + /* 802.11j 4.9GHz (20MHz) */ + (chan == 184 || chan == 188 || chan == 192 || chan == 196)); +} +#endif + +static unsigned int +ath5k_setup_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels, + unsigned int mode, unsigned int max) +{ + unsigned int count, size, freq, ch; + enum nl80211_band band; + + switch (mode) { + case AR5K_MODE_11A: + /* 1..220, but 2GHz frequencies are filtered by check_channel */ + size = 220; + band = NL80211_BAND_5GHZ; + break; + case AR5K_MODE_11B: + case AR5K_MODE_11G: + size = 26; + band = NL80211_BAND_2GHZ; + break; + default: + ATH5K_WARN(ah, "bad mode, not copying channels\n"); + return 0; + } + + count = 0; + for (ch = 1; ch <= size && count < max; ch++) { + freq = ieee80211_channel_to_frequency(ch, band); + + if (freq == 0) /* mapping failed - not a standard channel */ + continue; + + /* Write channel info, needed for ath5k_channel_ok() */ + channels[count].center_freq = freq; + channels[count].band = band; + channels[count].hw_value = mode; + + /* Check if channel is supported by the chipset */ + if (!ath5k_channel_ok(ah, &channels[count])) + continue; + + if (!ath5k_is_standard_channel(ch, band)) + continue; + + count++; + } + + return count; +} + +static void +ath5k_setup_rate_idx(struct ath5k_hw *ah, struct ieee80211_supported_band *b) +{ + u8 i; + + for (i = 0; i < AR5K_MAX_RATES; i++) + ah->rate_idx[b->band][i] = -1; + + for (i = 0; i < b->n_bitrates; i++) { + ah->rate_idx[b->band][b->bitrates[i].hw_value] = i; + if (b->bitrates[i].hw_value_short) + ah->rate_idx[b->band][b->bitrates[i].hw_value_short] = i; + } +} + +static int +ath5k_setup_bands(struct ieee80211_hw *hw) +{ + struct ath5k_hw *ah = hw->priv; + struct ieee80211_supported_band *sband; + int max_c, count_c = 0; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(ah->sbands) < NUM_NL80211_BANDS); + max_c = ARRAY_SIZE(ah->channels); + + /* 2GHz band */ + sband = &ah->sbands[NL80211_BAND_2GHZ]; + sband->band = NL80211_BAND_2GHZ; + sband->bitrates = &ah->rates[NL80211_BAND_2GHZ][0]; + + if (test_bit(AR5K_MODE_11G, ah->ah_capabilities.cap_mode)) { + /* G mode */ + memcpy(sband->bitrates, &ath5k_rates[0], + sizeof(struct ieee80211_rate) * 12); + sband->n_bitrates = 12; + + sband->channels = ah->channels; + sband->n_channels = ath5k_setup_channels(ah, sband->channels, + AR5K_MODE_11G, max_c); + + hw->wiphy->bands[NL80211_BAND_2GHZ] = sband; + count_c = sband->n_channels; + max_c -= count_c; + } else if (test_bit(AR5K_MODE_11B, ah->ah_capabilities.cap_mode)) { + /* B mode */ + memcpy(sband->bitrates, &ath5k_rates[0], + sizeof(struct ieee80211_rate) * 4); + sband->n_bitrates = 4; + + /* 5211 only supports B rates and uses 4bit rate codes + * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B) + * fix them up here: + */ + if (ah->ah_version == AR5K_AR5211) { + for (i = 0; i < 4; i++) { + sband->bitrates[i].hw_value = + sband->bitrates[i].hw_value & 0xF; + sband->bitrates[i].hw_value_short = + sband->bitrates[i].hw_value_short & 0xF; + } + } + + sband->channels = ah->channels; + sband->n_channels = ath5k_setup_channels(ah, sband->channels, + AR5K_MODE_11B, max_c); + + hw->wiphy->bands[NL80211_BAND_2GHZ] = sband; + count_c = sband->n_channels; + max_c -= count_c; + } + ath5k_setup_rate_idx(ah, sband); + + /* 5GHz band, A mode */ + if (test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)) { + sband = &ah->sbands[NL80211_BAND_5GHZ]; + sband->band = NL80211_BAND_5GHZ; + sband->bitrates = &ah->rates[NL80211_BAND_5GHZ][0]; + + memcpy(sband->bitrates, &ath5k_rates[4], + sizeof(struct ieee80211_rate) * 8); + sband->n_bitrates = 8; + + sband->channels = &ah->channels[count_c]; + sband->n_channels = ath5k_setup_channels(ah, sband->channels, + AR5K_MODE_11A, max_c); + + hw->wiphy->bands[NL80211_BAND_5GHZ] = sband; + } + ath5k_setup_rate_idx(ah, sband); + + ath5k_debug_dump_bands(ah); + + return 0; +} + +/* + * Set/change channels. We always reset the chip. + * To accomplish this we must first cleanup any pending DMA, + * then restart stuff after a la ath5k_init. + * + * Called with ah->lock. + */ +int +ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef) +{ + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "channel set, resetting (%u -> %u MHz)\n", + ah->curchan->center_freq, chandef->chan->center_freq); + + switch (chandef->width) { + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_20_NOHT: + ah->ah_bwmode = AR5K_BWMODE_DEFAULT; + break; + case NL80211_CHAN_WIDTH_5: + ah->ah_bwmode = AR5K_BWMODE_5MHZ; + break; + case NL80211_CHAN_WIDTH_10: + ah->ah_bwmode = AR5K_BWMODE_10MHZ; + break; + default: + WARN_ON(1); + return -EINVAL; + } + + /* + * To switch channels clear any pending DMA operations; + * wait long enough for the RX fifo to drain, reset the + * hardware at the new frequency, and then re-enable + * the relevant bits of the h/w. + */ + return ath5k_reset(ah, chandef->chan, true); +} + +void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) +{ + struct ath5k_vif_iter_data *iter_data = data; + int i; + struct ath5k_vif *avf = (void *)vif->drv_priv; + + if (iter_data->hw_macaddr) + for (i = 0; i < ETH_ALEN; i++) + iter_data->mask[i] &= + ~(iter_data->hw_macaddr[i] ^ mac[i]); + + if (!iter_data->found_active) { + iter_data->found_active = true; + memcpy(iter_data->active_mac, mac, ETH_ALEN); + } + + if (iter_data->need_set_hw_addr && iter_data->hw_macaddr) + if (ether_addr_equal(iter_data->hw_macaddr, mac)) + iter_data->need_set_hw_addr = false; + + if (!iter_data->any_assoc) { + if (avf->assoc) + iter_data->any_assoc = true; + } + + /* Calculate combined mode - when APs are active, operate in AP mode. + * Otherwise use the mode of the new interface. This can currently + * only deal with combinations of APs and STAs. Only one ad-hoc + * interfaces is allowed. + */ + if (avf->opmode == NL80211_IFTYPE_AP) + iter_data->opmode = NL80211_IFTYPE_AP; + else { + if (avf->opmode == NL80211_IFTYPE_STATION) + iter_data->n_stas++; + if (iter_data->opmode == NL80211_IFTYPE_UNSPECIFIED) + iter_data->opmode = avf->opmode; + } +} + +void +ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah, + struct ieee80211_vif *vif) +{ + struct ath_common *common = ath5k_hw_common(ah); + struct ath5k_vif_iter_data iter_data; + u32 rfilt; + + /* + * Use the hardware MAC address as reference, the hardware uses it + * together with the BSSID mask when matching addresses. + */ + iter_data.hw_macaddr = common->macaddr; + eth_broadcast_addr(iter_data.mask); + iter_data.found_active = false; + iter_data.need_set_hw_addr = true; + iter_data.opmode = NL80211_IFTYPE_UNSPECIFIED; + iter_data.n_stas = 0; + + if (vif) + ath5k_vif_iter(&iter_data, vif->addr, vif); + + /* Get list of all active MAC addresses */ + ieee80211_iterate_active_interfaces_atomic( + ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + ath5k_vif_iter, &iter_data); + memcpy(ah->bssidmask, iter_data.mask, ETH_ALEN); + + ah->opmode = iter_data.opmode; + if (ah->opmode == NL80211_IFTYPE_UNSPECIFIED) + /* Nothing active, default to station mode */ + ah->opmode = NL80211_IFTYPE_STATION; + + ath5k_hw_set_opmode(ah, ah->opmode); + ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n", + ah->opmode, ath_opmode_to_string(ah->opmode)); + + if (iter_data.need_set_hw_addr && iter_data.found_active) + ath5k_hw_set_lladdr(ah, iter_data.active_mac); + + if (ath5k_hw_hasbssidmask(ah)) + ath5k_hw_set_bssid_mask(ah, ah->bssidmask); + + /* Set up RX Filter */ + if (iter_data.n_stas > 1) { + /* If you have multiple STA interfaces connected to + * different APs, ARPs are not received (most of the time?) + * Enabling PROMISC appears to fix that problem. + */ + ah->filter_flags |= AR5K_RX_FILTER_PROM; + } + + rfilt = ah->filter_flags; + ath5k_hw_set_rx_filter(ah, rfilt); + ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); +} + +static inline int +ath5k_hw_to_driver_rix(struct ath5k_hw *ah, int hw_rix) +{ + int rix; + + /* return base rate on errors */ + if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES, + "hw_rix out of bounds: %x\n", hw_rix)) + return 0; + + rix = ah->rate_idx[ah->curchan->band][hw_rix]; + if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix)) + rix = 0; + + return rix; +} + +/***************\ +* Buffers setup * +\***************/ + +static +struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_hw *ah, dma_addr_t *skb_addr) +{ + struct ath_common *common = ath5k_hw_common(ah); + struct sk_buff *skb; + + /* + * Allocate buffer with headroom_needed space for the + * fake physical layer header at the start. + */ + skb = ath_rxbuf_alloc(common, + common->rx_bufsize, + GFP_ATOMIC); + + if (!skb) { + ATH5K_ERR(ah, "can't alloc skbuff of size %u\n", + common->rx_bufsize); + return NULL; + } + + *skb_addr = dma_map_single(ah->dev, + skb->data, common->rx_bufsize, + DMA_FROM_DEVICE); + + if (unlikely(dma_mapping_error(ah->dev, *skb_addr))) { + ATH5K_ERR(ah, "%s: DMA mapping failed\n", __func__); + dev_kfree_skb(skb); + return NULL; + } + return skb; +} + +static int +ath5k_rxbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf) +{ + struct sk_buff *skb = bf->skb; + struct ath5k_desc *ds; + int ret; + + if (!skb) { + skb = ath5k_rx_skb_alloc(ah, &bf->skbaddr); + if (!skb) + return -ENOMEM; + bf->skb = skb; + } + + /* + * Setup descriptors. For receive we always terminate + * the descriptor list with a self-linked entry so we'll + * not get overrun under high load (as can happen with a + * 5212 when ANI processing enables PHY error frames). + * + * To ensure the last descriptor is self-linked we create + * each descriptor as self-linked and add it to the end. As + * each additional descriptor is added the previous self-linked + * entry is "fixed" naturally. This should be safe even + * if DMA is happening. When processing RX interrupts we + * never remove/process the last, self-linked, entry on the + * descriptor list. This ensures the hardware always has + * someplace to write a new frame. + */ + ds = bf->desc; + ds->ds_link = bf->daddr; /* link to self */ + ds->ds_data = bf->skbaddr; + ret = ath5k_hw_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0); + if (ret) { + ATH5K_ERR(ah, "%s: could not setup RX desc\n", __func__); + return ret; + } + + if (ah->rxlink != NULL) + *ah->rxlink = bf->daddr; + ah->rxlink = &ds->ds_link; + return 0; +} + +static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr; + enum ath5k_pkt_type htype; + __le16 fc; + + hdr = (struct ieee80211_hdr *)skb->data; + fc = hdr->frame_control; + + if (ieee80211_is_beacon(fc)) + htype = AR5K_PKT_TYPE_BEACON; + else if (ieee80211_is_probe_resp(fc)) + htype = AR5K_PKT_TYPE_PROBE_RESP; + else if (ieee80211_is_atim(fc)) + htype = AR5K_PKT_TYPE_ATIM; + else if (ieee80211_is_pspoll(fc)) + htype = AR5K_PKT_TYPE_PSPOLL; + else + htype = AR5K_PKT_TYPE_NORMAL; + + return htype; +} + +static struct ieee80211_rate * +ath5k_get_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *info, + struct ath5k_buf *bf, int idx) +{ + /* + * convert a ieee80211_tx_rate RC-table entry to + * the respective ieee80211_rate struct + */ + if (bf->rates[idx].idx < 0) { + return NULL; + } + + return &hw->wiphy->bands[info->band]->bitrates[ bf->rates[idx].idx ]; +} + +static u16 +ath5k_get_rate_hw_value(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *info, + struct ath5k_buf *bf, int idx) +{ + struct ieee80211_rate *rate; + u16 hw_rate; + u8 rc_flags; + + rate = ath5k_get_rate(hw, info, bf, idx); + if (!rate) + return 0; + + rc_flags = bf->rates[idx].flags; + hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ? + rate->hw_value_short : rate->hw_value; + + return hw_rate; +} + +static bool ath5k_merge_ratetbl(struct ieee80211_sta *sta, + struct ath5k_buf *bf, + struct ieee80211_tx_info *tx_info) +{ + struct ieee80211_sta_rates *ratetbl; + u8 i; + + if (!sta) + return false; + + ratetbl = rcu_dereference(sta->rates); + if (!ratetbl) + return false; + + if (tx_info->control.rates[0].idx < 0 || + tx_info->control.rates[0].count == 0) + { + i = 0; + } else { + bf->rates[0] = tx_info->control.rates[0]; + i = 1; + } + + for ( ; i < IEEE80211_TX_MAX_RATES; i++) { + bf->rates[i].idx = ratetbl->rate[i].idx; + bf->rates[i].flags = ratetbl->rate[i].flags; + if (tx_info->control.use_rts) + bf->rates[i].count = ratetbl->rate[i].count_rts; + else if (tx_info->control.use_cts_prot) + bf->rates[i].count = ratetbl->rate[i].count_cts; + else + bf->rates[i].count = ratetbl->rate[i].count; + } + + return true; +} + +static int +ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf, + struct ath5k_txq *txq, int padsize, + struct ieee80211_tx_control *control) +{ + struct ath5k_desc *ds = bf->desc; + struct sk_buff *skb = bf->skb; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID; + struct ieee80211_rate *rate; + struct ieee80211_sta *sta; + unsigned int mrr_rate[3], mrr_tries[3]; + int i, ret; + u16 hw_rate; + u16 cts_rate = 0; + u16 duration = 0; + u8 rc_flags; + + flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK; + + /* XXX endianness */ + bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len, + DMA_TO_DEVICE); + + if (dma_mapping_error(ah->dev, bf->skbaddr)) + return -ENOSPC; + + if (control) + sta = control->sta; + else + sta = NULL; + + if (!ath5k_merge_ratetbl(sta, bf, info)) { + ieee80211_get_tx_rates(info->control.vif, + sta, skb, bf->rates, + ARRAY_SIZE(bf->rates)); + } + + rate = ath5k_get_rate(ah->hw, info, bf, 0); + + if (!rate) { + ret = -EINVAL; + goto err_unmap; + } + + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + flags |= AR5K_TXDESC_NOACK; + + rc_flags = bf->rates[0].flags; + + hw_rate = ath5k_get_rate_hw_value(ah->hw, info, bf, 0); + + pktlen = skb->len; + + /* FIXME: If we are in g mode and rate is a CCK rate + * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta + * from tx power (value is in dB units already) */ + if (info->control.hw_key) { + keyidx = info->control.hw_key->hw_key_idx; + pktlen += info->control.hw_key->icv_len; + } + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { + flags |= AR5K_TXDESC_RTSENA; + cts_rate = ieee80211_get_rts_cts_rate(ah->hw, info)->hw_value; + duration = le16_to_cpu(ieee80211_rts_duration(ah->hw, + info->control.vif, pktlen, info)); + } + if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { + flags |= AR5K_TXDESC_CTSENA; + cts_rate = ieee80211_get_rts_cts_rate(ah->hw, info)->hw_value; + duration = le16_to_cpu(ieee80211_ctstoself_duration(ah->hw, + info->control.vif, pktlen, info)); + } + + ret = ah->ah_setup_tx_desc(ah, ds, pktlen, + ieee80211_get_hdrlen_from_skb(skb), padsize, + get_hw_packet_type(skb), + (ah->ah_txpower.txp_requested * 2), + hw_rate, + bf->rates[0].count, keyidx, ah->ah_tx_ant, flags, + cts_rate, duration); + if (ret) + goto err_unmap; + + /* Set up MRR descriptor */ + if (ah->ah_capabilities.cap_has_mrr_support) { + memset(mrr_rate, 0, sizeof(mrr_rate)); + memset(mrr_tries, 0, sizeof(mrr_tries)); + + for (i = 0; i < 3; i++) { + + rate = ath5k_get_rate(ah->hw, info, bf, i); + if (!rate) + break; + + mrr_rate[i] = ath5k_get_rate_hw_value(ah->hw, info, bf, i); + mrr_tries[i] = bf->rates[i].count; + } + + ath5k_hw_setup_mrr_tx_desc(ah, ds, + mrr_rate[0], mrr_tries[0], + mrr_rate[1], mrr_tries[1], + mrr_rate[2], mrr_tries[2]); + } + + ds->ds_link = 0; + ds->ds_data = bf->skbaddr; + + spin_lock_bh(&txq->lock); + list_add_tail(&bf->list, &txq->q); + txq->txq_len++; + if (txq->link == NULL) /* is this first packet? */ + ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr); + else /* no, so only link it */ + *txq->link = bf->daddr; + + txq->link = &ds->ds_link; + ath5k_hw_start_tx_dma(ah, txq->qnum); + spin_unlock_bh(&txq->lock); + + return 0; +err_unmap: + dma_unmap_single(ah->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE); + return ret; +} + +/*******************\ +* Descriptors setup * +\*******************/ + +static int +ath5k_desc_alloc(struct ath5k_hw *ah) +{ + struct ath5k_desc *ds; + struct ath5k_buf *bf; + dma_addr_t da; + unsigned int i; + int ret; + + /* allocate descriptors */ + ah->desc_len = sizeof(struct ath5k_desc) * + (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1); + + ah->desc = dma_alloc_coherent(ah->dev, ah->desc_len, + &ah->desc_daddr, GFP_KERNEL); + if (ah->desc == NULL) { + ATH5K_ERR(ah, "can't allocate descriptors\n"); + ret = -ENOMEM; + goto err; + } + ds = ah->desc; + da = ah->desc_daddr; + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n", + ds, ah->desc_len, (unsigned long long)ah->desc_daddr); + + bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF, + sizeof(struct ath5k_buf), GFP_KERNEL); + if (bf == NULL) { + ATH5K_ERR(ah, "can't allocate bufptr\n"); + ret = -ENOMEM; + goto err_free; + } + ah->bufptr = bf; + + INIT_LIST_HEAD(&ah->rxbuf); + for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) { + bf->desc = ds; + bf->daddr = da; + list_add_tail(&bf->list, &ah->rxbuf); + } + + INIT_LIST_HEAD(&ah->txbuf); + ah->txbuf_len = ATH_TXBUF; + for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) { + bf->desc = ds; + bf->daddr = da; + list_add_tail(&bf->list, &ah->txbuf); + } + + /* beacon buffers */ + INIT_LIST_HEAD(&ah->bcbuf); + for (i = 0; i < ATH_BCBUF; i++, bf++, ds++, da += sizeof(*ds)) { + bf->desc = ds; + bf->daddr = da; + list_add_tail(&bf->list, &ah->bcbuf); + } + + return 0; +err_free: + dma_free_coherent(ah->dev, ah->desc_len, ah->desc, ah->desc_daddr); +err: + ah->desc = NULL; + return ret; +} + +void +ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf) +{ + BUG_ON(!bf); + if (!bf->skb) + return; + dma_unmap_single(ah->dev, bf->skbaddr, bf->skb->len, + DMA_TO_DEVICE); + ieee80211_free_txskb(ah->hw, bf->skb); + bf->skb = NULL; + bf->skbaddr = 0; + bf->desc->ds_data = 0; +} + +void +ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf) +{ + struct ath_common *common = ath5k_hw_common(ah); + + BUG_ON(!bf); + if (!bf->skb) + return; + dma_unmap_single(ah->dev, bf->skbaddr, common->rx_bufsize, + DMA_FROM_DEVICE); + dev_kfree_skb_any(bf->skb); + bf->skb = NULL; + bf->skbaddr = 0; + bf->desc->ds_data = 0; +} + +static void +ath5k_desc_free(struct ath5k_hw *ah) +{ + struct ath5k_buf *bf; + + list_for_each_entry(bf, &ah->txbuf, list) + ath5k_txbuf_free_skb(ah, bf); + list_for_each_entry(bf, &ah->rxbuf, list) + ath5k_rxbuf_free_skb(ah, bf); + list_for_each_entry(bf, &ah->bcbuf, list) + ath5k_txbuf_free_skb(ah, bf); + + /* Free memory associated with all descriptors */ + dma_free_coherent(ah->dev, ah->desc_len, ah->desc, ah->desc_daddr); + ah->desc = NULL; + ah->desc_daddr = 0; + + kfree(ah->bufptr); + ah->bufptr = NULL; +} + + +/**************\ +* Queues setup * +\**************/ + +static struct ath5k_txq * +ath5k_txq_setup(struct ath5k_hw *ah, + int qtype, int subtype) +{ + struct ath5k_txq *txq; + struct ath5k_txq_info qi = { + .tqi_subtype = subtype, + /* XXX: default values not correct for B and XR channels, + * but who cares? */ + .tqi_aifs = AR5K_TUNE_AIFS, + .tqi_cw_min = AR5K_TUNE_CWMIN, + .tqi_cw_max = AR5K_TUNE_CWMAX + }; + int qnum; + + /* + * Enable interrupts only for EOL and DESC conditions. + * We mark tx descriptors to receive a DESC interrupt + * when a tx queue gets deep; otherwise we wait for the + * EOL to reap descriptors. Note that this is done to + * reduce interrupt load and this only defers reaping + * descriptors, never transmitting frames. Aside from + * reducing interrupts this also permits more concurrency. + * The only potential downside is if the tx queue backs + * up in which case the top half of the kernel may backup + * due to a lack of tx descriptors. + */ + qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE | + AR5K_TXQ_FLAG_TXDESCINT_ENABLE; + qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi); + if (qnum < 0) { + /* + * NB: don't print a message, this happens + * normally on parts with too few tx queues + */ + return ERR_PTR(qnum); + } + txq = &ah->txqs[qnum]; + if (!txq->setup) { + txq->qnum = qnum; + txq->link = NULL; + INIT_LIST_HEAD(&txq->q); + spin_lock_init(&txq->lock); + txq->setup = true; + txq->txq_len = 0; + txq->txq_max = ATH5K_TXQ_LEN_MAX; + txq->txq_poll_mark = false; + txq->txq_stuck = 0; + } + return &ah->txqs[qnum]; +} + +static int +ath5k_beaconq_setup(struct ath5k_hw *ah) +{ + struct ath5k_txq_info qi = { + /* XXX: default values not correct for B and XR channels, + * but who cares? */ + .tqi_aifs = AR5K_TUNE_AIFS, + .tqi_cw_min = AR5K_TUNE_CWMIN, + .tqi_cw_max = AR5K_TUNE_CWMAX, + /* NB: for dynamic turbo, don't enable any other interrupts */ + .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE + }; + + return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi); +} + +static int +ath5k_beaconq_config(struct ath5k_hw *ah) +{ + struct ath5k_txq_info qi; + int ret; + + ret = ath5k_hw_get_tx_queueprops(ah, ah->bhalq, &qi); + if (ret) + goto err; + + if (ah->opmode == NL80211_IFTYPE_AP || + ah->opmode == NL80211_IFTYPE_MESH_POINT) { + /* + * Always burst out beacon and CAB traffic + * (aifs = cwmin = cwmax = 0) + */ + qi.tqi_aifs = 0; + qi.tqi_cw_min = 0; + qi.tqi_cw_max = 0; + } else if (ah->opmode == NL80211_IFTYPE_ADHOC) { + /* + * Adhoc mode; backoff between 0 and (2 * cw_min). + */ + qi.tqi_aifs = 0; + qi.tqi_cw_min = 0; + qi.tqi_cw_max = 2 * AR5K_TUNE_CWMIN; + } + + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, + "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n", + qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max); + + ret = ath5k_hw_set_tx_queueprops(ah, ah->bhalq, &qi); + if (ret) { + ATH5K_ERR(ah, "%s: unable to update parameters for beacon " + "hardware queue!\n", __func__); + goto err; + } + ret = ath5k_hw_reset_tx_queue(ah, ah->bhalq); /* push to h/w */ + if (ret) + goto err; + + /* reconfigure cabq with ready time to 80% of beacon_interval */ + ret = ath5k_hw_get_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi); + if (ret) + goto err; + + qi.tqi_ready_time = (ah->bintval * 80) / 100; + ret = ath5k_hw_set_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi); + if (ret) + goto err; + + ret = ath5k_hw_reset_tx_queue(ah, AR5K_TX_QUEUE_ID_CAB); +err: + return ret; +} + +/** + * ath5k_drain_tx_buffs - Empty tx buffers + * + * @ah: The &struct ath5k_hw + * + * Empty tx buffers from all queues in preparation + * of a reset or during shutdown. + * + * NB: this assumes output has been stopped and + * we do not need to block ath5k_tx_tasklet + */ +static void +ath5k_drain_tx_buffs(struct ath5k_hw *ah) +{ + struct ath5k_txq *txq; + struct ath5k_buf *bf, *bf0; + int i; + + for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) { + if (ah->txqs[i].setup) { + txq = &ah->txqs[i]; + spin_lock_bh(&txq->lock); + list_for_each_entry_safe(bf, bf0, &txq->q, list) { + ath5k_debug_printtxbuf(ah, bf); + + ath5k_txbuf_free_skb(ah, bf); + + spin_lock(&ah->txbuflock); + list_move_tail(&bf->list, &ah->txbuf); + ah->txbuf_len++; + txq->txq_len--; + spin_unlock(&ah->txbuflock); + } + txq->link = NULL; + txq->txq_poll_mark = false; + spin_unlock_bh(&txq->lock); + } + } +} + +static void +ath5k_txq_release(struct ath5k_hw *ah) +{ + struct ath5k_txq *txq = ah->txqs; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(ah->txqs); i++, txq++) + if (txq->setup) { + ath5k_hw_release_tx_queue(ah, txq->qnum); + txq->setup = false; + } +} + + +/*************\ +* RX Handling * +\*************/ + +/* + * Enable the receive h/w following a reset. + */ +static int +ath5k_rx_start(struct ath5k_hw *ah) +{ + struct ath_common *common = ath5k_hw_common(ah); + struct ath5k_buf *bf; + int ret; + + common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz); + + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n", + common->cachelsz, common->rx_bufsize); + + spin_lock_bh(&ah->rxbuflock); + ah->rxlink = NULL; + list_for_each_entry(bf, &ah->rxbuf, list) { + ret = ath5k_rxbuf_setup(ah, bf); + if (ret != 0) { + spin_unlock_bh(&ah->rxbuflock); + goto err; + } + } + bf = list_first_entry(&ah->rxbuf, struct ath5k_buf, list); + ath5k_hw_set_rxdp(ah, bf->daddr); + spin_unlock_bh(&ah->rxbuflock); + + ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ + ath5k_update_bssid_mask_and_opmode(ah, NULL); /* set filters, etc. */ + ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ + + return 0; +err: + return ret; +} + +/* + * Disable the receive logic on PCU (DRU) + * In preparation for a shutdown. + * + * Note: Doesn't stop rx DMA, ath5k_hw_dma_stop + * does. + */ +static void +ath5k_rx_stop(struct ath5k_hw *ah) +{ + + ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ + ath5k_hw_stop_rx_pcu(ah); /* disable PCU */ + + ath5k_debug_printrxbuffs(ah); +} + +static unsigned int +ath5k_rx_decrypted(struct ath5k_hw *ah, struct sk_buff *skb, + struct ath5k_rx_status *rs) +{ + struct ath_common *common = ath5k_hw_common(ah); + struct ieee80211_hdr *hdr = (void *)skb->data; + unsigned int keyix, hlen; + + if (!(rs->rs_status & AR5K_RXERR_DECRYPT) && + rs->rs_keyix != AR5K_RXKEYIX_INVALID) + return RX_FLAG_DECRYPTED; + + /* Apparently when a default key is used to decrypt the packet + the hw does not set the index used to decrypt. In such cases + get the index from the packet. */ + hlen = ieee80211_hdrlen(hdr->frame_control); + if (ieee80211_has_protected(hdr->frame_control) && + !(rs->rs_status & AR5K_RXERR_DECRYPT) && + skb->len >= hlen + 4) { + keyix = skb->data[hlen + 3] >> 6; + + if (test_bit(keyix, common->keymap)) + return RX_FLAG_DECRYPTED; + } + + return 0; +} + + +static void +ath5k_check_ibss_tsf(struct ath5k_hw *ah, struct sk_buff *skb, + struct ieee80211_rx_status *rxs) +{ + u64 tsf, bc_tstamp; + u32 hw_tu; + struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; + + if (le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS) { + /* + * Received an IBSS beacon with the same BSSID. Hardware *must* + * have updated the local TSF. We have to work around various + * hardware bugs, though... + */ + tsf = ath5k_hw_get_tsf64(ah); + bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp); + hw_tu = TSF_TO_TU(tsf); + + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, + "beacon %llx mactime %llx (diff %lld) tsf now %llx\n", + (unsigned long long)bc_tstamp, + (unsigned long long)rxs->mactime, + (unsigned long long)(rxs->mactime - bc_tstamp), + (unsigned long long)tsf); + + /* + * Sometimes the HW will give us a wrong tstamp in the rx + * status, causing the timestamp extension to go wrong. + * (This seems to happen especially with beacon frames bigger + * than 78 byte (incl. FCS)) + * But we know that the receive timestamp must be later than the + * timestamp of the beacon since HW must have synced to that. + * + * NOTE: here we assume mactime to be after the frame was + * received, not like mac80211 which defines it at the start. + */ + if (bc_tstamp > rxs->mactime) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, + "fixing mactime from %llx to %llx\n", + (unsigned long long)rxs->mactime, + (unsigned long long)tsf); + rxs->mactime = tsf; + } + + /* + * Local TSF might have moved higher than our beacon timers, + * in that case we have to update them to continue sending + * beacons. This also takes care of synchronizing beacon sending + * times with other stations. + */ + if (hw_tu >= ah->nexttbtt) + ath5k_beacon_update_timers(ah, bc_tstamp); + + /* Check if the beacon timers are still correct, because a TSF + * update might have created a window between them - for a + * longer description see the comment of this function: */ + if (!ath5k_hw_check_beacon_timers(ah, ah->bintval)) { + ath5k_beacon_update_timers(ah, bc_tstamp); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, + "fixed beacon timers after beacon receive\n"); + } + } +} + +/* + * Compute padding position. skb must contain an IEEE 802.11 frame + */ +static int ath5k_common_padpos(struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + __le16 frame_control = hdr->frame_control; + int padpos = 24; + + if (ieee80211_has_a4(frame_control)) + padpos += ETH_ALEN; + + if (ieee80211_is_data_qos(frame_control)) + padpos += IEEE80211_QOS_CTL_LEN; + + return padpos; +} + +/* + * This function expects an 802.11 frame and returns the number of + * bytes added, or -1 if we don't have enough header room. + */ +static int ath5k_add_padding(struct sk_buff *skb) +{ + int padpos = ath5k_common_padpos(skb); + int padsize = padpos & 3; + + if (padsize && skb->len > padpos) { + + if (skb_headroom(skb) < padsize) + return -1; + + skb_push(skb, padsize); + memmove(skb->data, skb->data + padsize, padpos); + return padsize; + } + + return 0; +} + +/* + * The MAC header is padded to have 32-bit boundary if the + * packet payload is non-zero. The general calculation for + * padsize would take into account odd header lengths: + * padsize = 4 - (hdrlen & 3); however, since only + * even-length headers are used, padding can only be 0 or 2 + * bytes and we can optimize this a bit. We must not try to + * remove padding from short control frames that do not have a + * payload. + * + * This function expects an 802.11 frame and returns the number of + * bytes removed. + */ +static int ath5k_remove_padding(struct sk_buff *skb) +{ + int padpos = ath5k_common_padpos(skb); + int padsize = padpos & 3; + + if (padsize && skb->len >= padpos + padsize) { + memmove(skb->data + padsize, skb->data, padpos); + skb_pull(skb, padsize); + return padsize; + } + + return 0; +} + +static void +ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb, + struct ath5k_rx_status *rs) +{ + struct ieee80211_rx_status *rxs; + struct ath_common *common = ath5k_hw_common(ah); + + ath5k_remove_padding(skb); + + rxs = IEEE80211_SKB_RXCB(skb); + + rxs->flag = 0; + if (unlikely(rs->rs_status & AR5K_RXERR_MIC)) + rxs->flag |= RX_FLAG_MMIC_ERROR; + if (unlikely(rs->rs_status & AR5K_RXERR_CRC)) + rxs->flag |= RX_FLAG_FAILED_FCS_CRC; + + + /* + * always extend the mac timestamp, since this information is + * also needed for proper IBSS merging. + * + * XXX: it might be too late to do it here, since rs_tstamp is + * 15bit only. that means TSF extension has to be done within + * 32768usec (about 32ms). it might be necessary to move this to + * the interrupt handler, like it is done in madwifi. + */ + rxs->mactime = ath5k_extend_tsf(ah, rs->rs_tstamp); + rxs->flag |= RX_FLAG_MACTIME_END; + + rxs->freq = ah->curchan->center_freq; + rxs->band = ah->curchan->band; + + rxs->signal = ah->ah_noise_floor + rs->rs_rssi; + + rxs->antenna = rs->rs_antenna; + + if (rs->rs_antenna > 0 && rs->rs_antenna < 5) + ah->stats.antenna_rx[rs->rs_antenna]++; + else + ah->stats.antenna_rx[0]++; /* invalid */ + + rxs->rate_idx = ath5k_hw_to_driver_rix(ah, rs->rs_rate); + rxs->flag |= ath5k_rx_decrypted(ah, skb, rs); + switch (ah->ah_bwmode) { + case AR5K_BWMODE_5MHZ: + rxs->bw = RATE_INFO_BW_5; + break; + case AR5K_BWMODE_10MHZ: + rxs->bw = RATE_INFO_BW_10; + break; + default: + break; + } + + if (rs->rs_rate == + ah->sbands[ah->curchan->band].bitrates[rxs->rate_idx].hw_value_short) + rxs->enc_flags |= RX_ENC_FLAG_SHORTPRE; + + trace_ath5k_rx(ah, skb); + + if (ath_is_mybeacon(common, (struct ieee80211_hdr *)skb->data)) { + ewma_beacon_rssi_add(&ah->ah_beacon_rssi_avg, rs->rs_rssi); + + /* check beacons in IBSS mode */ + if (ah->opmode == NL80211_IFTYPE_ADHOC) + ath5k_check_ibss_tsf(ah, skb, rxs); + } + + ieee80211_rx(ah->hw, skb); +} + +/** ath5k_frame_receive_ok() - Do we want to receive this frame or not? + * + * Check if we want to further process this frame or not. Also update + * statistics. Return true if we want this frame, false if not. + */ +static bool +ath5k_receive_frame_ok(struct ath5k_hw *ah, struct ath5k_rx_status *rs) +{ + ah->stats.rx_all_count++; + ah->stats.rx_bytes_count += rs->rs_datalen; + + if (unlikely(rs->rs_status)) { + unsigned int filters; + + if (rs->rs_status & AR5K_RXERR_CRC) + ah->stats.rxerr_crc++; + if (rs->rs_status & AR5K_RXERR_FIFO) + ah->stats.rxerr_fifo++; + if (rs->rs_status & AR5K_RXERR_PHY) { + ah->stats.rxerr_phy++; + if (rs->rs_phyerr > 0 && rs->rs_phyerr < 32) + ah->stats.rxerr_phy_code[rs->rs_phyerr]++; + + /* + * Treat packets that underwent a CCK or OFDM reset as having a bad CRC. + * These restarts happen when the radio resynchronizes to a stronger frame + * while receiving a weaker frame. Here we receive the prefix of the weak + * frame. Since these are incomplete packets, mark their CRC as invalid. + */ + if (rs->rs_phyerr == AR5K_RX_PHY_ERROR_OFDM_RESTART || + rs->rs_phyerr == AR5K_RX_PHY_ERROR_CCK_RESTART) { + rs->rs_status |= AR5K_RXERR_CRC; + rs->rs_status &= ~AR5K_RXERR_PHY; + } else { + return false; + } + } + if (rs->rs_status & AR5K_RXERR_DECRYPT) { + /* + * Decrypt error. If the error occurred + * because there was no hardware key, then + * let the frame through so the upper layers + * can process it. This is necessary for 5210 + * parts which have no way to setup a ``clear'' + * key cache entry. + * + * XXX do key cache faulting + */ + ah->stats.rxerr_decrypt++; + if (rs->rs_keyix == AR5K_RXKEYIX_INVALID && + !(rs->rs_status & AR5K_RXERR_CRC)) + return true; + } + if (rs->rs_status & AR5K_RXERR_MIC) { + ah->stats.rxerr_mic++; + return true; + } + + /* + * Reject any frames with non-crypto errors, and take into account the + * current FIF_* filters. + */ + filters = AR5K_RXERR_DECRYPT; + if (ah->fif_filter_flags & FIF_FCSFAIL) + filters |= AR5K_RXERR_CRC; + + if (rs->rs_status & ~filters) + return false; + } + + if (unlikely(rs->rs_more)) { + ah->stats.rxerr_jumbo++; + return false; + } + return true; +} + +static void +ath5k_set_current_imask(struct ath5k_hw *ah) +{ + enum ath5k_int imask; + unsigned long flags; + + if (test_bit(ATH_STAT_RESET, ah->status)) + return; + + spin_lock_irqsave(&ah->irqlock, flags); + imask = ah->imask; + if (ah->rx_pending) + imask &= ~AR5K_INT_RX_ALL; + if (ah->tx_pending) + imask &= ~AR5K_INT_TX_ALL; + ath5k_hw_set_imr(ah, imask); + spin_unlock_irqrestore(&ah->irqlock, flags); +} + +static void +ath5k_tasklet_rx(struct tasklet_struct *t) +{ + struct ath5k_rx_status rs = {}; + struct sk_buff *skb, *next_skb; + dma_addr_t next_skb_addr; + struct ath5k_hw *ah = from_tasklet(ah, t, rxtq); + struct ath_common *common = ath5k_hw_common(ah); + struct ath5k_buf *bf; + struct ath5k_desc *ds; + int ret; + + spin_lock(&ah->rxbuflock); + if (list_empty(&ah->rxbuf)) { + ATH5K_WARN(ah, "empty rx buf pool\n"); + goto unlock; + } + do { + bf = list_first_entry(&ah->rxbuf, struct ath5k_buf, list); + BUG_ON(bf->skb == NULL); + skb = bf->skb; + ds = bf->desc; + + /* bail if HW is still using self-linked descriptor */ + if (ath5k_hw_get_rxdp(ah) == bf->daddr) + break; + + ret = ah->ah_proc_rx_desc(ah, ds, &rs); + if (unlikely(ret == -EINPROGRESS)) + break; + else if (unlikely(ret)) { + ATH5K_ERR(ah, "error in processing rx descriptor\n"); + ah->stats.rxerr_proc++; + break; + } + + if (ath5k_receive_frame_ok(ah, &rs)) { + next_skb = ath5k_rx_skb_alloc(ah, &next_skb_addr); + + /* + * If we can't replace bf->skb with a new skb under + * memory pressure, just skip this packet + */ + if (!next_skb) + goto next; + + dma_unmap_single(ah->dev, bf->skbaddr, + common->rx_bufsize, + DMA_FROM_DEVICE); + + skb_put(skb, rs.rs_datalen); + + ath5k_receive_frame(ah, skb, &rs); + + bf->skb = next_skb; + bf->skbaddr = next_skb_addr; + } +next: + list_move_tail(&bf->list, &ah->rxbuf); + } while (ath5k_rxbuf_setup(ah, bf) == 0); +unlock: + spin_unlock(&ah->rxbuflock); + ah->rx_pending = false; + ath5k_set_current_imask(ah); +} + + +/*************\ +* TX Handling * +\*************/ + +void +ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ath5k_txq *txq, struct ieee80211_tx_control *control) +{ + struct ath5k_hw *ah = hw->priv; + struct ath5k_buf *bf; + unsigned long flags; + int padsize; + + trace_ath5k_tx(ah, skb, txq); + + /* + * The hardware expects the header padded to 4 byte boundaries. + * If this is not the case, we add the padding after the header. + */ + padsize = ath5k_add_padding(skb); + if (padsize < 0) { + ATH5K_ERR(ah, "tx hdrlen not %%4: not enough" + " headroom to pad"); + goto drop_packet; + } + + if (txq->txq_len >= txq->txq_max && + txq->qnum <= AR5K_TX_QUEUE_ID_DATA_MAX) + ieee80211_stop_queue(hw, txq->qnum); + + spin_lock_irqsave(&ah->txbuflock, flags); + if (list_empty(&ah->txbuf)) { + ATH5K_ERR(ah, "no further txbuf available, dropping packet\n"); + spin_unlock_irqrestore(&ah->txbuflock, flags); + ieee80211_stop_queues(hw); + goto drop_packet; + } + bf = list_first_entry(&ah->txbuf, struct ath5k_buf, list); + list_del(&bf->list); + ah->txbuf_len--; + if (list_empty(&ah->txbuf)) + ieee80211_stop_queues(hw); + spin_unlock_irqrestore(&ah->txbuflock, flags); + + bf->skb = skb; + + if (ath5k_txbuf_setup(ah, bf, txq, padsize, control)) { + bf->skb = NULL; + spin_lock_irqsave(&ah->txbuflock, flags); + list_add_tail(&bf->list, &ah->txbuf); + ah->txbuf_len++; + spin_unlock_irqrestore(&ah->txbuflock, flags); + goto drop_packet; + } + return; + +drop_packet: + ieee80211_free_txskb(hw, skb); +} + +static void +ath5k_tx_frame_completed(struct ath5k_hw *ah, struct sk_buff *skb, + struct ath5k_txq *txq, struct ath5k_tx_status *ts, + struct ath5k_buf *bf) +{ + struct ieee80211_tx_info *info; + u8 tries[3]; + int i; + int size = 0; + + ah->stats.tx_all_count++; + ah->stats.tx_bytes_count += skb->len; + info = IEEE80211_SKB_CB(skb); + + size = min_t(int, sizeof(info->status.rates), sizeof(bf->rates)); + memcpy(info->status.rates, bf->rates, size); + + tries[0] = info->status.rates[0].count; + tries[1] = info->status.rates[1].count; + tries[2] = info->status.rates[2].count; + + ieee80211_tx_info_clear_status(info); + + for (i = 0; i < ts->ts_final_idx; i++) { + struct ieee80211_tx_rate *r = + &info->status.rates[i]; + + r->count = tries[i]; + } + + info->status.rates[ts->ts_final_idx].count = ts->ts_final_retry; + info->status.rates[ts->ts_final_idx + 1].idx = -1; + + if (unlikely(ts->ts_status)) { + ah->stats.ack_fail++; + if (ts->ts_status & AR5K_TXERR_FILT) { + info->flags |= IEEE80211_TX_STAT_TX_FILTERED; + ah->stats.txerr_filt++; + } + if (ts->ts_status & AR5K_TXERR_XRETRY) + ah->stats.txerr_retry++; + if (ts->ts_status & AR5K_TXERR_FIFO) + ah->stats.txerr_fifo++; + } else { + info->flags |= IEEE80211_TX_STAT_ACK; + info->status.ack_signal = ts->ts_rssi; + + /* count the successful attempt as well */ + info->status.rates[ts->ts_final_idx].count++; + } + + /* + * Remove MAC header padding before giving the frame + * back to mac80211. + */ + ath5k_remove_padding(skb); + + if (ts->ts_antenna > 0 && ts->ts_antenna < 5) + ah->stats.antenna_tx[ts->ts_antenna]++; + else + ah->stats.antenna_tx[0]++; /* invalid */ + + trace_ath5k_tx_complete(ah, skb, txq, ts); + ieee80211_tx_status(ah->hw, skb); +} + +static void +ath5k_tx_processq(struct ath5k_hw *ah, struct ath5k_txq *txq) +{ + struct ath5k_tx_status ts = {}; + struct ath5k_buf *bf, *bf0; + struct ath5k_desc *ds; + struct sk_buff *skb; + int ret; + + spin_lock(&txq->lock); + list_for_each_entry_safe(bf, bf0, &txq->q, list) { + + txq->txq_poll_mark = false; + + /* skb might already have been processed last time. */ + if (bf->skb != NULL) { + ds = bf->desc; + + ret = ah->ah_proc_tx_desc(ah, ds, &ts); + if (unlikely(ret == -EINPROGRESS)) + break; + else if (unlikely(ret)) { + ATH5K_ERR(ah, + "error %d while processing " + "queue %u\n", ret, txq->qnum); + break; + } + + skb = bf->skb; + bf->skb = NULL; + + dma_unmap_single(ah->dev, bf->skbaddr, skb->len, + DMA_TO_DEVICE); + ath5k_tx_frame_completed(ah, skb, txq, &ts, bf); + } + + /* + * It's possible that the hardware can say the buffer is + * completed when it hasn't yet loaded the ds_link from + * host memory and moved on. + * Always keep the last descriptor to avoid HW races... + */ + if (ath5k_hw_get_txdp(ah, txq->qnum) != bf->daddr) { + spin_lock(&ah->txbuflock); + list_move_tail(&bf->list, &ah->txbuf); + ah->txbuf_len++; + txq->txq_len--; + spin_unlock(&ah->txbuflock); + } + } + spin_unlock(&txq->lock); + if (txq->txq_len < ATH5K_TXQ_LEN_LOW && txq->qnum < 4) + ieee80211_wake_queue(ah->hw, txq->qnum); +} + +static void +ath5k_tasklet_tx(struct tasklet_struct *t) +{ + int i; + struct ath5k_hw *ah = from_tasklet(ah, t, txtq); + + for (i = 0; i < AR5K_NUM_TX_QUEUES; i++) + if (ah->txqs[i].setup && (ah->ah_txq_isr_txok_all & BIT(i))) + ath5k_tx_processq(ah, &ah->txqs[i]); + + ah->tx_pending = false; + ath5k_set_current_imask(ah); +} + + +/*****************\ +* Beacon handling * +\*****************/ + +/* + * Setup the beacon frame for transmit. + */ +static int +ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf) +{ + struct sk_buff *skb = bf->skb; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ath5k_desc *ds; + int ret = 0; + u8 antenna; + u32 flags; + const int padsize = 0; + + bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len, + DMA_TO_DEVICE); + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] " + "skbaddr %llx\n", skb, skb->data, skb->len, + (unsigned long long)bf->skbaddr); + + if (dma_mapping_error(ah->dev, bf->skbaddr)) { + ATH5K_ERR(ah, "beacon DMA mapping failed\n"); + dev_kfree_skb_any(skb); + bf->skb = NULL; + return -EIO; + } + + ds = bf->desc; + antenna = ah->ah_tx_ant; + + flags = AR5K_TXDESC_NOACK; + if (ah->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) { + ds->ds_link = bf->daddr; /* self-linked */ + flags |= AR5K_TXDESC_VEOL; + } else + ds->ds_link = 0; + + /* + * If we use multiple antennas on AP and use + * the Sectored AP scenario, switch antenna every + * 4 beacons to make sure everybody hears our AP. + * When a client tries to associate, hw will keep + * track of the tx antenna to be used for this client + * automatically, based on ACKed packets. + * + * Note: AP still listens and transmits RTS on the + * default antenna which is supposed to be an omni. + * + * Note2: On sectored scenarios it's possible to have + * multiple antennas (1 omni -- the default -- and 14 + * sectors), so if we choose to actually support this + * mode, we need to allow the user to set how many antennas + * we have and tweak the code below to send beacons + * on all of them. + */ + if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP) + antenna = ah->bsent & 4 ? 2 : 1; + + + /* FIXME: If we are in g mode and rate is a CCK rate + * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta + * from tx power (value is in dB units already) */ + ds->ds_data = bf->skbaddr; + ret = ah->ah_setup_tx_desc(ah, ds, skb->len, + ieee80211_get_hdrlen_from_skb(skb), padsize, + AR5K_PKT_TYPE_BEACON, + (ah->ah_txpower.txp_requested * 2), + ieee80211_get_tx_rate(ah->hw, info)->hw_value, + 1, AR5K_TXKEYIX_INVALID, + antenna, flags, 0, 0); + if (ret) + goto err_unmap; + + return 0; +err_unmap: + dma_unmap_single(ah->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE); + return ret; +} + +/* + * Updates the beacon that is sent by ath5k_beacon_send. For adhoc, + * this is called only once at config_bss time, for AP we do it every + * SWBA interrupt so that the TIM will reflect buffered frames. + * + * Called with the beacon lock. + */ +int +ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + int ret; + struct ath5k_hw *ah = hw->priv; + struct ath5k_vif *avf; + struct sk_buff *skb; + + if (WARN_ON(!vif)) { + ret = -EINVAL; + goto out; + } + + skb = ieee80211_beacon_get(hw, vif, 0); + + if (!skb) { + ret = -ENOMEM; + goto out; + } + + avf = (void *)vif->drv_priv; + ath5k_txbuf_free_skb(ah, avf->bbuf); + avf->bbuf->skb = skb; + ret = ath5k_beacon_setup(ah, avf->bbuf); +out: + return ret; +} + +/* + * Transmit a beacon frame at SWBA. Dynamic updates to the + * frame contents are done as needed and the slot time is + * also adjusted based on current state. + * + * This is called from software irq context (beacontq tasklets) + * or user context from ath5k_beacon_config. + */ +static void +ath5k_beacon_send(struct ath5k_hw *ah) +{ + struct ieee80211_vif *vif; + struct ath5k_vif *avf; + struct ath5k_buf *bf; + struct sk_buff *skb; + int err; + + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n"); + + /* + * Check if the previous beacon has gone out. If + * not, don't try to post another: skip this + * period and wait for the next. Missed beacons + * indicate a problem and should not occur. If we + * miss too many consecutive beacons reset the device. + */ + if (unlikely(ath5k_hw_num_tx_pending(ah, ah->bhalq) != 0)) { + ah->bmisscount++; + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, + "missed %u consecutive beacons\n", ah->bmisscount); + if (ah->bmisscount > 10) { /* NB: 10 is a guess */ + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, + "stuck beacon time (%u missed)\n", + ah->bmisscount); + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "stuck beacon, resetting\n"); + ieee80211_queue_work(ah->hw, &ah->reset_work); + } + return; + } + if (unlikely(ah->bmisscount != 0)) { + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, + "resume beacon xmit after %u misses\n", + ah->bmisscount); + ah->bmisscount = 0; + } + + if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs + + ah->num_mesh_vifs > 1) || + ah->opmode == NL80211_IFTYPE_MESH_POINT) { + u64 tsf = ath5k_hw_get_tsf64(ah); + u32 tsftu = TSF_TO_TU(tsf); + int slot = ((tsftu % ah->bintval) * ATH_BCBUF) / ah->bintval; + vif = ah->bslot[(slot + 1) % ATH_BCBUF]; + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, + "tsf %llx tsftu %x intval %u slot %u vif %p\n", + (unsigned long long)tsf, tsftu, ah->bintval, slot, vif); + } else /* only one interface */ + vif = ah->bslot[0]; + + if (!vif) + return; + + avf = (void *)vif->drv_priv; + bf = avf->bbuf; + + /* + * Stop any current dma and put the new frame on the queue. + * This should never fail since we check above that no frames + * are still pending on the queue. + */ + if (unlikely(ath5k_hw_stop_beacon_queue(ah, ah->bhalq))) { + ATH5K_WARN(ah, "beacon queue %u didn't start/stop ?\n", ah->bhalq); + /* NB: hw still stops DMA, so proceed */ + } + + /* refresh the beacon for AP or MESH mode */ + if (ah->opmode == NL80211_IFTYPE_AP || + ah->opmode == NL80211_IFTYPE_MESH_POINT) { + err = ath5k_beacon_update(ah->hw, vif); + if (err) + return; + } + + if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION || + ah->opmode == NL80211_IFTYPE_MONITOR)) { + ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb); + return; + } + + trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]); + + ath5k_hw_set_txdp(ah, ah->bhalq, bf->daddr); + ath5k_hw_start_tx_dma(ah, ah->bhalq); + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", + ah->bhalq, (unsigned long long)bf->daddr, bf->desc); + + skb = ieee80211_get_buffered_bc(ah->hw, vif); + while (skb) { + ath5k_tx_queue(ah->hw, skb, ah->cabq, NULL); + + if (ah->cabq->txq_len >= ah->cabq->txq_max) + break; + + skb = ieee80211_get_buffered_bc(ah->hw, vif); + } + + ah->bsent++; +} + +/** + * ath5k_beacon_update_timers - update beacon timers + * + * @ah: struct ath5k_hw pointer we are operating on + * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a + * beacon timer update based on the current HW TSF. + * + * Calculate the next target beacon transmit time (TBTT) based on the timestamp + * of a received beacon or the current local hardware TSF and write it to the + * beacon timer registers. + * + * This is called in a variety of situations, e.g. when a beacon is received, + * when a TSF update has been detected, but also when an new IBSS is created or + * when we otherwise know we have to update the timers, but we keep it in this + * function to have it all together in one place. + */ +void +ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf) +{ + u32 nexttbtt, intval, hw_tu, bc_tu; + u64 hw_tsf; + + intval = ah->bintval & AR5K_BEACON_PERIOD; + if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs + + ah->num_mesh_vifs > 1) { + intval /= ATH_BCBUF; /* staggered multi-bss beacons */ + if (intval < 15) + ATH5K_WARN(ah, "intval %u is too low, min 15\n", + intval); + } + if (WARN_ON(!intval)) + return; + + /* beacon TSF converted to TU */ + bc_tu = TSF_TO_TU(bc_tsf); + + /* current TSF converted to TU */ + hw_tsf = ath5k_hw_get_tsf64(ah); + hw_tu = TSF_TO_TU(hw_tsf); + +#define FUDGE (AR5K_TUNE_SW_BEACON_RESP + 3) + /* We use FUDGE to make sure the next TBTT is ahead of the current TU. + * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer + * configuration we need to make sure it is bigger than that. */ + + if (bc_tsf == -1) { + /* + * no beacons received, called internally. + * just need to refresh timers based on HW TSF. + */ + nexttbtt = roundup(hw_tu + FUDGE, intval); + } else if (bc_tsf == 0) { + /* + * no beacon received, probably called by ath5k_reset_tsf(). + * reset TSF to start with 0. + */ + nexttbtt = intval; + intval |= AR5K_BEACON_RESET_TSF; + } else if (bc_tsf > hw_tsf) { + /* + * beacon received, SW merge happened but HW TSF not yet updated. + * not possible to reconfigure timers yet, but next time we + * receive a beacon with the same BSSID, the hardware will + * automatically update the TSF and then we need to reconfigure + * the timers. + */ + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, + "need to wait for HW TSF sync\n"); + return; + } else { + /* + * most important case for beacon synchronization between STA. + * + * beacon received and HW TSF has been already updated by HW. + * update next TBTT based on the TSF of the beacon, but make + * sure it is ahead of our local TSF timer. + */ + nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval); + } +#undef FUDGE + + ah->nexttbtt = nexttbtt; + + intval |= AR5K_BEACON_ENA; + ath5k_hw_init_beacon_timers(ah, nexttbtt, intval); + + /* + * debugging output last in order to preserve the time critical aspect + * of this function + */ + if (bc_tsf == -1) + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, + "reconfigured timers based on HW TSF\n"); + else if (bc_tsf == 0) + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, + "reset HW TSF and timers\n"); + else + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, + "updated timers based on beacon TSF\n"); + + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, + "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n", + (unsigned long long) bc_tsf, + (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "intval %u %s %s\n", + intval & AR5K_BEACON_PERIOD, + intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "", + intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : ""); +} + +/** + * ath5k_beacon_config - Configure the beacon queues and interrupts + * + * @ah: struct ath5k_hw pointer we are operating on + * + * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA + * interrupts to detect TSF updates only. + */ +void +ath5k_beacon_config(struct ath5k_hw *ah) +{ + spin_lock_bh(&ah->block); + ah->bmisscount = 0; + ah->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); + + if (ah->enable_beacon) { + /* + * In IBSS mode we use a self-linked tx descriptor and let the + * hardware send the beacons automatically. We have to load it + * only once here. + * We use the SWBA interrupt only to keep track of the beacon + * timers in order to detect automatic TSF updates. + */ + ath5k_beaconq_config(ah); + + ah->imask |= AR5K_INT_SWBA; + + if (ah->opmode == NL80211_IFTYPE_ADHOC) { + if (ath5k_hw_hasveol(ah)) + ath5k_beacon_send(ah); + } else + ath5k_beacon_update_timers(ah, -1); + } else { + ath5k_hw_stop_beacon_queue(ah, ah->bhalq); + } + + ath5k_hw_set_imr(ah, ah->imask); + spin_unlock_bh(&ah->block); +} + +static void ath5k_tasklet_beacon(struct tasklet_struct *t) +{ + struct ath5k_hw *ah = from_tasklet(ah, t, beacontq); + + /* + * Software beacon alert--time to send a beacon. + * + * In IBSS mode we use this interrupt just to + * keep track of the next TBTT (target beacon + * transmission time) in order to detect whether + * automatic TSF updates happened. + */ + if (ah->opmode == NL80211_IFTYPE_ADHOC) { + /* XXX: only if VEOL supported */ + u64 tsf = ath5k_hw_get_tsf64(ah); + ah->nexttbtt += ah->bintval; + ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, + "SWBA nexttbtt: %x hw_tu: %x " + "TSF: %llx\n", + ah->nexttbtt, + TSF_TO_TU(tsf), + (unsigned long long) tsf); + } else { + spin_lock(&ah->block); + ath5k_beacon_send(ah); + spin_unlock(&ah->block); + } +} + + +/********************\ +* Interrupt handling * +\********************/ + +static void +ath5k_intr_calibration_poll(struct ath5k_hw *ah) +{ + if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) { + + /* Run ANI only when calibration is not active */ + + ah->ah_cal_next_ani = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI); + tasklet_schedule(&ah->ani_tasklet); + + } else if (time_is_before_eq_jiffies(ah->ah_cal_next_short) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) && + !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) { + + /* Run calibration only when another calibration + * is not running. + * + * Note: This is for both full/short calibration, + * if it's time for a full one, ath5k_calibrate_work will deal + * with it. */ + + ah->ah_cal_next_short = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT); + ieee80211_queue_work(ah->hw, &ah->calib_work); + } + /* we could use SWI to generate enough interrupts to meet our + * calibration interval requirements, if necessary: + * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */ +} + +static void +ath5k_schedule_rx(struct ath5k_hw *ah) +{ + ah->rx_pending = true; + tasklet_schedule(&ah->rxtq); +} + +static void +ath5k_schedule_tx(struct ath5k_hw *ah) +{ + ah->tx_pending = true; + tasklet_schedule(&ah->txtq); +} + +static irqreturn_t +ath5k_intr(int irq, void *dev_id) +{ + struct ath5k_hw *ah = dev_id; + enum ath5k_int status; + unsigned int counter = 1000; + + + /* + * If hw is not ready (or detached) and we get an + * interrupt, or if we have no interrupts pending + * (that means it's not for us) skip it. + * + * NOTE: Group 0/1 PCI interface registers are not + * supported on WiSOCs, so we can't check for pending + * interrupts (ISR belongs to another register group + * so we are ok). + */ + if (unlikely(test_bit(ATH_STAT_INVALID, ah->status) || + ((ath5k_get_bus_type(ah) != ATH_AHB) && + !ath5k_hw_is_intr_pending(ah)))) + return IRQ_NONE; + + /** Main loop **/ + do { + ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */ + + ATH5K_DBG(ah, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n", + status, ah->imask); + + /* + * Fatal hw error -> Log and reset + * + * Fatal errors are unrecoverable so we have to + * reset the card. These errors include bus and + * dma errors. + */ + if (unlikely(status & AR5K_INT_FATAL)) { + + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "fatal int, resetting\n"); + ieee80211_queue_work(ah->hw, &ah->reset_work); + + /* + * RX Overrun -> Count and reset if needed + * + * Receive buffers are full. Either the bus is busy or + * the CPU is not fast enough to process all received + * frames. + */ + } else if (unlikely(status & AR5K_INT_RXORN)) { + + /* + * Older chipsets need a reset to come out of this + * condition, but we treat it as RX for newer chips. + * We don't know exactly which versions need a reset + * this guess is copied from the HAL. + */ + ah->stats.rxorn_intr++; + + if (ah->ah_mac_srev < AR5K_SREV_AR5212) { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "rx overrun, resetting\n"); + ieee80211_queue_work(ah->hw, &ah->reset_work); + } else + ath5k_schedule_rx(ah); + + } else { + + /* Software Beacon Alert -> Schedule beacon tasklet */ + if (status & AR5K_INT_SWBA) + tasklet_hi_schedule(&ah->beacontq); + + /* + * No more RX descriptors -> Just count + * + * NB: the hardware should re-read the link when + * RXE bit is written, but it doesn't work at + * least on older hardware revs. + */ + if (status & AR5K_INT_RXEOL) + ah->stats.rxeol_intr++; + + + /* TX Underrun -> Bump tx trigger level */ + if (status & AR5K_INT_TXURN) + ath5k_hw_update_tx_triglevel(ah, true); + + /* RX -> Schedule rx tasklet */ + if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR)) + ath5k_schedule_rx(ah); + + /* TX -> Schedule tx tasklet */ + if (status & (AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXEOL)) + ath5k_schedule_tx(ah); + + /* Missed beacon -> TODO + if (status & AR5K_INT_BMISS) + */ + + /* MIB event -> Update counters and notify ANI */ + if (status & AR5K_INT_MIB) { + ah->stats.mib_intr++; + ath5k_hw_update_mib_counters(ah); + ath5k_ani_mib_intr(ah); + } + + /* GPIO -> Notify RFKill layer */ + if (status & AR5K_INT_GPIO) + tasklet_schedule(&ah->rf_kill.toggleq); + + } + + if (ath5k_get_bus_type(ah) == ATH_AHB) + break; + + } while (ath5k_hw_is_intr_pending(ah) && --counter > 0); + + /* + * Until we handle rx/tx interrupts mask them on IMR + * + * NOTE: ah->(rx/tx)_pending are set when scheduling the tasklets + * and unset after we 've handled the interrupts. + */ + if (ah->rx_pending || ah->tx_pending) + ath5k_set_current_imask(ah); + + if (unlikely(!counter)) + ATH5K_WARN(ah, "too many interrupts, giving up for now\n"); + + /* Fire up calibration poll */ + ath5k_intr_calibration_poll(ah); + + return IRQ_HANDLED; +} + +/* + * Periodically recalibrate the PHY to account + * for temperature/environment changes. + */ +static void +ath5k_calibrate_work(struct work_struct *work) +{ + struct ath5k_hw *ah = container_of(work, struct ath5k_hw, + calib_work); + + /* Should we run a full calibration ? */ + if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) { + + ah->ah_cal_next_full = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); + ah->ah_cal_mask |= AR5K_CALIBRATION_FULL; + + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, + "running full calibration\n"); + + if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) { + /* + * Rfgain is out of bounds, reset the chip + * to load new gain values. + */ + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "got new rfgain, resetting\n"); + ieee80211_queue_work(ah->hw, &ah->reset_work); + } + } else + ah->ah_cal_mask |= AR5K_CALIBRATION_SHORT; + + + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n", + ieee80211_frequency_to_channel(ah->curchan->center_freq), + ah->curchan->hw_value); + + if (ath5k_hw_phy_calibrate(ah, ah->curchan)) + ATH5K_ERR(ah, "calibration of channel %u failed\n", + ieee80211_frequency_to_channel( + ah->curchan->center_freq)); + + /* Clear calibration flags */ + if (ah->ah_cal_mask & AR5K_CALIBRATION_FULL) + ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL; + else if (ah->ah_cal_mask & AR5K_CALIBRATION_SHORT) + ah->ah_cal_mask &= ~AR5K_CALIBRATION_SHORT; +} + + +static void +ath5k_tasklet_ani(struct tasklet_struct *t) +{ + struct ath5k_hw *ah = from_tasklet(ah, t, ani_tasklet); + + ah->ah_cal_mask |= AR5K_CALIBRATION_ANI; + ath5k_ani_calibration(ah); + ah->ah_cal_mask &= ~AR5K_CALIBRATION_ANI; +} + + +static void +ath5k_tx_complete_poll_work(struct work_struct *work) +{ + struct ath5k_hw *ah = container_of(work, struct ath5k_hw, + tx_complete_work.work); + struct ath5k_txq *txq; + int i; + bool needreset = false; + + if (!test_bit(ATH_STAT_STARTED, ah->status)) + return; + + mutex_lock(&ah->lock); + + for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) { + if (ah->txqs[i].setup) { + txq = &ah->txqs[i]; + spin_lock_bh(&txq->lock); + if (txq->txq_len > 1) { + if (txq->txq_poll_mark) { + ATH5K_DBG(ah, ATH5K_DEBUG_XMIT, + "TX queue stuck %d\n", + txq->qnum); + needreset = true; + txq->txq_stuck++; + spin_unlock_bh(&txq->lock); + break; + } else { + txq->txq_poll_mark = true; + } + } + spin_unlock_bh(&txq->lock); + } + } + + if (needreset) { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "TX queues stuck, resetting\n"); + ath5k_reset(ah, NULL, true); + } + + mutex_unlock(&ah->lock); + + ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work, + msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); +} + + +/*************************\ +* Initialization routines * +\*************************/ + +static const struct ieee80211_iface_limit if_limits[] = { + { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) }, + { .max = 4, .types = +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif + BIT(NL80211_IFTYPE_AP) }, +}; + +static const struct ieee80211_iface_combination if_comb = { + .limits = if_limits, + .n_limits = ARRAY_SIZE(if_limits), + .max_interfaces = 2048, + .num_different_channels = 1, +}; + +int +ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops) +{ + struct ieee80211_hw *hw = ah->hw; + struct ath_common *common; + int ret; + int csz; + + /* Initialize driver private data */ + SET_IEEE80211_DEV(hw, ah->dev); + ieee80211_hw_set(hw, SUPPORTS_RC_TABLE); + ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); + ieee80211_hw_set(hw, MFP_CAPABLE); + ieee80211_hw_set(hw, SIGNAL_DBM); + ieee80211_hw_set(hw, RX_INCLUDES_FCS); + ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING); + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_MESH_POINT); + + hw->wiphy->iface_combinations = &if_comb; + hw->wiphy->n_iface_combinations = 1; + + /* SW support for IBSS_RSN is provided by mac80211 */ + hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + + hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ; + + /* both antennas can be configured as RX or TX */ + hw->wiphy->available_antennas_tx = 0x3; + hw->wiphy->available_antennas_rx = 0x3; + + hw->extra_tx_headroom = 2; + + wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); + + /* + * Mark the device as detached to avoid processing + * interrupts until setup is complete. + */ + __set_bit(ATH_STAT_INVALID, ah->status); + + ah->opmode = NL80211_IFTYPE_STATION; + ah->bintval = 1000; + mutex_init(&ah->lock); + spin_lock_init(&ah->rxbuflock); + spin_lock_init(&ah->txbuflock); + spin_lock_init(&ah->block); + spin_lock_init(&ah->irqlock); + + /* Setup interrupt handler */ + ret = request_irq(ah->irq, ath5k_intr, IRQF_SHARED, "ath", ah); + if (ret) { + ATH5K_ERR(ah, "request_irq failed\n"); + goto err; + } + + common = ath5k_hw_common(ah); + common->ops = &ath5k_common_ops; + common->bus_ops = bus_ops; + common->ah = ah; + common->hw = hw; + common->priv = ah; + common->clockrate = 40; + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + ath5k_read_cachesize(common, &csz); + common->cachelsz = csz << 2; /* convert to bytes */ + + spin_lock_init(&common->cc_lock); + + /* Initialize device */ + ret = ath5k_hw_init(ah); + if (ret) + goto err_irq; + + /* Set up multi-rate retry capabilities */ + if (ah->ah_capabilities.cap_has_mrr_support) { + hw->max_rates = 4; + hw->max_rate_tries = max(AR5K_INIT_RETRY_SHORT, + AR5K_INIT_RETRY_LONG); + } + + hw->vif_data_size = sizeof(struct ath5k_vif); + + /* Finish private driver data initialization */ + ret = ath5k_init(hw); + if (ret) + goto err_ah; + + ATH5K_INFO(ah, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", + ath5k_chip_name(AR5K_VERSION_MAC, ah->ah_mac_srev), + ah->ah_mac_srev, + ah->ah_phy_revision); + + if (!ah->ah_single_chip) { + /* Single chip radio (!RF5111) */ + if (ah->ah_radio_5ghz_revision && + !ah->ah_radio_2ghz_revision) { + /* No 5GHz support -> report 2GHz radio */ + if (!test_bit(AR5K_MODE_11A, + ah->ah_capabilities.cap_mode)) { + ATH5K_INFO(ah, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_5ghz_revision), + ah->ah_radio_5ghz_revision); + /* No 2GHz support (5110 and some + * 5GHz only cards) -> report 5GHz radio */ + } else if (!test_bit(AR5K_MODE_11B, + ah->ah_capabilities.cap_mode)) { + ATH5K_INFO(ah, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_5ghz_revision), + ah->ah_radio_5ghz_revision); + /* Multiband radio */ + } else { + ATH5K_INFO(ah, "RF%s multiband radio found" + " (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_5ghz_revision), + ah->ah_radio_5ghz_revision); + } + } + /* Multi chip radio (RF5111 - RF2111) -> + * report both 2GHz/5GHz radios */ + else if (ah->ah_radio_5ghz_revision && + ah->ah_radio_2ghz_revision) { + ATH5K_INFO(ah, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_5ghz_revision), + ah->ah_radio_5ghz_revision); + ATH5K_INFO(ah, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + ah->ah_radio_2ghz_revision), + ah->ah_radio_2ghz_revision); + } + } + + ath5k_debug_init_device(ah); + + /* ready to process interrupts */ + __clear_bit(ATH_STAT_INVALID, ah->status); + + return 0; +err_ah: + ath5k_hw_deinit(ah); +err_irq: + free_irq(ah->irq, ah); +err: + return ret; +} + +static int +ath5k_stop_locked(struct ath5k_hw *ah) +{ + + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "invalid %u\n", + test_bit(ATH_STAT_INVALID, ah->status)); + + /* + * Shutdown the hardware and driver: + * stop output from above + * disable interrupts + * turn off timers + * turn off the radio + * clear transmit machinery + * clear receive machinery + * drain and release tx queues + * reclaim beacon resources + * power down hardware + * + * Note that some of this work is not possible if the + * hardware is gone (invalid). + */ + ieee80211_stop_queues(ah->hw); + + if (!test_bit(ATH_STAT_INVALID, ah->status)) { + ath5k_led_off(ah); + ath5k_hw_set_imr(ah, 0); + synchronize_irq(ah->irq); + ath5k_rx_stop(ah); + ath5k_hw_dma_stop(ah); + ath5k_drain_tx_buffs(ah); + ath5k_hw_phy_disable(ah); + } + + return 0; +} + +int ath5k_start(struct ieee80211_hw *hw) +{ + struct ath5k_hw *ah = hw->priv; + struct ath_common *common = ath5k_hw_common(ah); + int ret, i; + + mutex_lock(&ah->lock); + + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "mode %d\n", ah->opmode); + + /* + * Stop anything previously setup. This is safe + * no matter this is the first time through or not. + */ + ath5k_stop_locked(ah); + + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + ah->curchan = ah->hw->conf.chandef.chan; + ah->imask = AR5K_INT_RXOK + | AR5K_INT_RXERR + | AR5K_INT_RXEOL + | AR5K_INT_RXORN + | AR5K_INT_TXDESC + | AR5K_INT_TXEOL + | AR5K_INT_FATAL + | AR5K_INT_GLOBAL + | AR5K_INT_MIB; + + ret = ath5k_reset(ah, NULL, false); + if (ret) + goto done; + + if (!ath5k_modparam_no_hw_rfkill_switch) + ath5k_rfkill_hw_start(ah); + + /* + * Reset the key cache since some parts do not reset the + * contents on initial power up or resume from suspend. + */ + for (i = 0; i < common->keymax; i++) + ath_hw_keyreset(common, (u16) i); + + /* Use higher rates for acks instead of base + * rate */ + ah->ah_ack_bitrate_high = true; + + for (i = 0; i < ARRAY_SIZE(ah->bslot); i++) + ah->bslot[i] = NULL; + + ret = 0; +done: + mutex_unlock(&ah->lock); + + set_bit(ATH_STAT_STARTED, ah->status); + ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work, + msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); + + return ret; +} + +static void ath5k_stop_tasklets(struct ath5k_hw *ah) +{ + ah->rx_pending = false; + ah->tx_pending = false; + tasklet_kill(&ah->rxtq); + tasklet_kill(&ah->txtq); + tasklet_kill(&ah->beacontq); + tasklet_kill(&ah->ani_tasklet); +} + +/* + * Stop the device, grabbing the top-level lock to protect + * against concurrent entry through ath5k_init (which can happen + * if another thread does a system call and the thread doing the + * stop is preempted). + */ +void ath5k_stop(struct ieee80211_hw *hw) +{ + struct ath5k_hw *ah = hw->priv; + int ret; + + mutex_lock(&ah->lock); + ret = ath5k_stop_locked(ah); + if (ret == 0 && !test_bit(ATH_STAT_INVALID, ah->status)) { + /* + * Don't set the card in full sleep mode! + * + * a) When the device is in this state it must be carefully + * woken up or references to registers in the PCI clock + * domain may freeze the bus (and system). This varies + * by chip and is mostly an issue with newer parts + * (madwifi sources mentioned srev >= 0x78) that go to + * sleep more quickly. + * + * b) On older chips full sleep results a weird behaviour + * during wakeup. I tested various cards with srev < 0x78 + * and they don't wake up after module reload, a second + * module reload is needed to bring the card up again. + * + * Until we figure out what's going on don't enable + * full chip reset on any chip (this is what Legacy HAL + * and Sam's HAL do anyway). Instead Perform a full reset + * on the device (same as initial state after attach) and + * leave it idle (keep MAC/BB on warm reset) */ + ret = ath5k_hw_on_hold(ah); + + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "putting device to sleep\n"); + } + + mutex_unlock(&ah->lock); + + ath5k_stop_tasklets(ah); + + clear_bit(ATH_STAT_STARTED, ah->status); + cancel_delayed_work_sync(&ah->tx_complete_work); + + if (!ath5k_modparam_no_hw_rfkill_switch) + ath5k_rfkill_hw_stop(ah); +} + +/* + * Reset the hardware. If chan is not NULL, then also pause rx/tx + * and change to the given channel. + * + * This should be called with ah->lock. + */ +static int +ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan, + bool skip_pcu) +{ + struct ath_common *common = ath5k_hw_common(ah); + int ret, ani_mode; + bool fast = chan && modparam_fastchanswitch ? 1 : 0; + + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n"); + + __set_bit(ATH_STAT_RESET, ah->status); + + ath5k_hw_set_imr(ah, 0); + synchronize_irq(ah->irq); + ath5k_stop_tasklets(ah); + + /* Save ani mode and disable ANI during + * reset. If we don't we might get false + * PHY error interrupts. */ + ani_mode = ah->ani_state.ani_mode; + ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF); + + /* We are going to empty hw queues + * so we should also free any remaining + * tx buffers */ + ath5k_drain_tx_buffs(ah); + + /* Stop PCU */ + ath5k_hw_stop_rx_pcu(ah); + + /* Stop DMA + * + * Note: If DMA didn't stop continue + * since only a reset will fix it. + */ + ret = ath5k_hw_dma_stop(ah); + + /* RF Bus grant won't work if we have pending + * frames + */ + if (ret && fast) { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "DMA didn't stop, falling back to normal reset\n"); + fast = false; + } + + if (chan) + ah->curchan = chan; + + ret = ath5k_hw_reset(ah, ah->opmode, ah->curchan, fast, skip_pcu); + if (ret) { + ATH5K_ERR(ah, "can't reset hardware (%d)\n", ret); + goto err; + } + + ret = ath5k_rx_start(ah); + if (ret) { + ATH5K_ERR(ah, "can't start recv logic\n"); + goto err; + } + + ath5k_ani_init(ah, ani_mode); + + /* + * Set calibration intervals + * + * Note: We don't need to run calibration imediately + * since some initial calibration is done on reset + * even for fast channel switching. Also on scanning + * this will get set again and again and it won't get + * executed unless we connect somewhere and spend some + * time on the channel (that's what calibration needs + * anyway to be accurate). + */ + ah->ah_cal_next_full = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL); + ah->ah_cal_next_ani = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI); + ah->ah_cal_next_short = jiffies + + msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT); + + ewma_beacon_rssi_init(&ah->ah_beacon_rssi_avg); + + /* clear survey data and cycle counters */ + memset(&ah->survey, 0, sizeof(ah->survey)); + spin_lock_bh(&common->cc_lock); + ath_hw_cycle_counters_update(common); + memset(&common->cc_survey, 0, sizeof(common->cc_survey)); + memset(&common->cc_ani, 0, sizeof(common->cc_ani)); + spin_unlock_bh(&common->cc_lock); + + /* + * Change channels and update the h/w rate map if we're switching; + * e.g. 11a to 11b/g. + * + * We may be doing a reset in response to an ioctl that changes the + * channel so update any state that might change as a result. + * + * XXX needed? + */ +/* ath5k_chan_change(ah, c); */ + + __clear_bit(ATH_STAT_RESET, ah->status); + + ath5k_beacon_config(ah); + /* intrs are enabled by ath5k_beacon_config */ + + ieee80211_wake_queues(ah->hw); + + return 0; +err: + return ret; +} + +static void ath5k_reset_work(struct work_struct *work) +{ + struct ath5k_hw *ah = container_of(work, struct ath5k_hw, + reset_work); + + mutex_lock(&ah->lock); + ath5k_reset(ah, NULL, true); + mutex_unlock(&ah->lock); +} + +static int +ath5k_init(struct ieee80211_hw *hw) +{ + + struct ath5k_hw *ah = hw->priv; + struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); + struct ath5k_txq *txq; + u8 mac[ETH_ALEN] = {}; + int ret; + + + /* + * Collect the channel list. The 802.11 layer + * is responsible for filtering this list based + * on settings like the phy mode and regulatory + * domain restrictions. + */ + ret = ath5k_setup_bands(hw); + if (ret) { + ATH5K_ERR(ah, "can't get channels\n"); + goto err; + } + + /* + * Allocate tx+rx descriptors and populate the lists. + */ + ret = ath5k_desc_alloc(ah); + if (ret) { + ATH5K_ERR(ah, "can't allocate descriptors\n"); + goto err; + } + + /* + * Allocate hardware transmit queues: one queue for + * beacon frames and one data queue for each QoS + * priority. Note that hw functions handle resetting + * these queues at the needed time. + */ + ret = ath5k_beaconq_setup(ah); + if (ret < 0) { + ATH5K_ERR(ah, "can't setup a beacon xmit queue\n"); + goto err_desc; + } + ah->bhalq = ret; + ah->cabq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_CAB, 0); + if (IS_ERR(ah->cabq)) { + ATH5K_ERR(ah, "can't setup cab queue\n"); + ret = PTR_ERR(ah->cabq); + goto err_bhal; + } + + /* 5211 and 5212 usually support 10 queues but we better rely on the + * capability information */ + if (ah->ah_capabilities.cap_queues.q_tx_num >= 6) { + /* This order matches mac80211's queue priority, so we can + * directly use the mac80211 queue number without any mapping */ + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + hw->queues = 4; + } else { + /* older hardware (5210) can only support one data queue */ + txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE); + if (IS_ERR(txq)) { + ATH5K_ERR(ah, "can't setup xmit queue\n"); + ret = PTR_ERR(txq); + goto err_queues; + } + hw->queues = 1; + } + + tasklet_setup(&ah->rxtq, ath5k_tasklet_rx); + tasklet_setup(&ah->txtq, ath5k_tasklet_tx); + tasklet_setup(&ah->beacontq, ath5k_tasklet_beacon); + tasklet_setup(&ah->ani_tasklet, ath5k_tasklet_ani); + + INIT_WORK(&ah->reset_work, ath5k_reset_work); + INIT_WORK(&ah->calib_work, ath5k_calibrate_work); + INIT_DELAYED_WORK(&ah->tx_complete_work, ath5k_tx_complete_poll_work); + + ret = ath5k_hw_common(ah)->bus_ops->eeprom_read_mac(ah, mac); + if (ret) { + ATH5K_ERR(ah, "unable to read address from EEPROM\n"); + goto err_queues; + } + + SET_IEEE80211_PERM_ADDR(hw, mac); + /* All MAC address bits matter for ACKs */ + ath5k_update_bssid_mask_and_opmode(ah, NULL); + + regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain; + ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier); + if (ret) { + ATH5K_ERR(ah, "can't initialize regulatory system\n"); + goto err_queues; + } + + ret = ieee80211_register_hw(hw); + if (ret) { + ATH5K_ERR(ah, "can't register ieee80211 hw\n"); + goto err_queues; + } + + if (!ath_is_world_regd(regulatory)) + regulatory_hint(hw->wiphy, regulatory->alpha2); + + ath5k_init_leds(ah); + + ath5k_sysfs_register(ah); + + return 0; +err_queues: + ath5k_txq_release(ah); +err_bhal: + ath5k_hw_release_tx_queue(ah, ah->bhalq); +err_desc: + ath5k_desc_free(ah); +err: + return ret; +} + +void +ath5k_deinit_ah(struct ath5k_hw *ah) +{ + struct ieee80211_hw *hw = ah->hw; + + /* + * NB: the order of these is important: + * o call the 802.11 layer before detaching ath5k_hw to + * ensure callbacks into the driver to delete global + * key cache entries can be handled + * o reclaim the tx queue data structures after calling + * the 802.11 layer as we'll get called back to reclaim + * node state and potentially want to use them + * o to cleanup the tx queues the hal is called, so detach + * it last + * XXX: ??? detach ath5k_hw ??? + * Other than that, it's straightforward... + */ + ieee80211_unregister_hw(hw); + ath5k_desc_free(ah); + ath5k_txq_release(ah); + ath5k_hw_release_tx_queue(ah, ah->bhalq); + ath5k_unregister_leds(ah); + + ath5k_sysfs_unregister(ah); + /* + * NB: can't reclaim these until after ieee80211_ifdetach + * returns because we'll get called back to reclaim node + * state and potentially want to use them. + */ + ath5k_hw_deinit(ah); + free_irq(ah->irq, ah); +} + +bool +ath5k_any_vif_assoc(struct ath5k_hw *ah) +{ + struct ath5k_vif_iter_data iter_data; + iter_data.hw_macaddr = NULL; + iter_data.any_assoc = false; + iter_data.need_set_hw_addr = false; + iter_data.found_active = true; + + ieee80211_iterate_active_interfaces_atomic( + ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + ath5k_vif_iter, &iter_data); + return iter_data.any_assoc; +} + +void +ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable) +{ + struct ath5k_hw *ah = hw->priv; + u32 rfilt; + rfilt = ath5k_hw_get_rx_filter(ah); + if (enable) + rfilt |= AR5K_RX_FILTER_BEACON; + else + rfilt &= ~AR5K_RX_FILTER_BEACON; + ath5k_hw_set_rx_filter(ah, rfilt); + ah->filter_flags = rfilt; +} + +void _ath5k_printk(const struct ath5k_hw *ah, const char *level, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + if (ah && ah->hw) + printk("%s" pr_fmt("%s: %pV"), + level, wiphy_name(ah->hw->wiphy), &vaf); + else + printk("%s" pr_fmt("%pV"), level, &vaf); + + va_end(args); +} diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h new file mode 100644 index 000000000..97469d0fb --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -0,0 +1,121 @@ +/*- + * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +/* + * Definitions for the Atheros Wireless LAN controller driver. + */ +#ifndef _DEV_ATH5K_BASE_H +#define _DEV_ATH5K_BASE_H + +struct ieee80211_vif; +struct ieee80211_hw; +struct ath5k_hw; +struct ath5k_txq; +struct ieee80211_channel; +struct ath_bus_ops; +struct ieee80211_tx_control; +enum nl80211_iftype; + +enum ath5k_srev_type { + AR5K_VERSION_MAC, + AR5K_VERSION_RAD, +}; + +struct ath5k_srev_name { + const char *sr_name; + enum ath5k_srev_type sr_type; + u_int sr_val; +}; + +struct ath5k_buf { + struct list_head list; + struct ath5k_desc *desc; /* virtual addr of desc */ + dma_addr_t daddr; /* physical addr of desc */ + struct sk_buff *skb; /* skbuff for buf */ + dma_addr_t skbaddr; /* physical addr of skb data */ + struct ieee80211_tx_rate rates[4]; /* number of multi-rate stages */ +}; + +struct ath5k_vif { + bool assoc; /* are we associated or not */ + enum nl80211_iftype opmode; + int bslot; + struct ath5k_buf *bbuf; /* beacon buffer */ +}; + +struct ath5k_vif_iter_data { + const u8 *hw_macaddr; + u8 mask[ETH_ALEN]; + u8 active_mac[ETH_ALEN]; /* first active MAC */ + bool need_set_hw_addr; + bool found_active; + bool any_assoc; + enum nl80211_iftype opmode; + int n_stas; +}; + +void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif); +bool ath5k_any_vif_assoc(struct ath5k_hw *ah); + +int ath5k_start(struct ieee80211_hw *hw); +void ath5k_stop(struct ieee80211_hw *hw); + +void ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf); +int ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif); +void ath5k_beacon_config(struct ath5k_hw *ah); +void ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable); + +void ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah, + struct ieee80211_vif *vif); +int ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef); +void ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf); +void ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf); +void ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ath5k_txq *txq, struct ieee80211_tx_control *control); + +const char *ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val); + +int ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops); +void ath5k_deinit_ah(struct ath5k_hw *ah); + +/* Check whether BSSID mask is supported */ +#define ath5k_hw_hasbssidmask(_ah) (ah->ah_version == AR5K_AR5212) + +/* Check whether virtual EOL is supported */ +#define ath5k_hw_hasveol(_ah) (ah->ah_version != AR5K_AR5210) + +#endif /* _DEV_ATH5K_BASE_H */ diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c new file mode 100644 index 000000000..994169ad3 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/caps.c @@ -0,0 +1,154 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/**************\ +* Capabilities * +\**************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "../regd.h" + +/* + * Fill the capabilities struct + * TODO: Merge this with EEPROM code when we are done with it + */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah) +{ + struct ath5k_capabilities *caps = &ah->ah_capabilities; + u16 ee_header; + + /* Capabilities stored in the EEPROM */ + ee_header = caps->cap_eeprom.ee_header; + + if (ah->ah_version == AR5K_AR5210) { + /* + * Set radio capabilities + * (The AR5110 only supports the middle 5GHz band) + */ + caps->cap_range.range_5ghz_min = 5120; + caps->cap_range.range_5ghz_max = 5430; + caps->cap_range.range_2ghz_min = 0; + caps->cap_range.range_2ghz_max = 0; + + /* Set supported modes */ + __set_bit(AR5K_MODE_11A, caps->cap_mode); + } else { + /* + * XXX The transceiver supports frequencies from 4920 to 6100MHz + * XXX and from 2312 to 2732MHz. There are problems with the + * XXX current ieee80211 implementation because the IEEE + * XXX channel mapping does not support negative channel + * XXX numbers (2312MHz is channel -19). Of course, this + * XXX doesn't matter because these channels are out of the + * XXX legal range. + */ + + /* + * Set radio capabilities + */ + + if (AR5K_EEPROM_HDR_11A(ee_header)) { + if (ath_is_49ghz_allowed(caps->cap_eeprom.ee_regdomain)) + caps->cap_range.range_5ghz_min = 4920; + else + caps->cap_range.range_5ghz_min = 5005; + caps->cap_range.range_5ghz_max = 6100; + + /* Set supported modes */ + __set_bit(AR5K_MODE_11A, caps->cap_mode); + } + + /* Enable 802.11b if a 2GHz capable radio (2111/5112) is + * connected */ + if (AR5K_EEPROM_HDR_11B(ee_header) || + (AR5K_EEPROM_HDR_11G(ee_header) && + ah->ah_version != AR5K_AR5211)) { + /* 2312 */ + caps->cap_range.range_2ghz_min = 2412; + caps->cap_range.range_2ghz_max = 2732; + + /* Override 2GHz modes on SoCs that need it + * NOTE: cap_needs_2GHz_ovr gets set from + * ath_ahb_probe */ + if (!caps->cap_needs_2GHz_ovr) { + if (AR5K_EEPROM_HDR_11B(ee_header)) + __set_bit(AR5K_MODE_11B, + caps->cap_mode); + + if (AR5K_EEPROM_HDR_11G(ee_header) && + ah->ah_version != AR5K_AR5211) + __set_bit(AR5K_MODE_11G, + caps->cap_mode); + } + } + } + + if ((ah->ah_radio_5ghz_revision & 0xf0) == AR5K_SREV_RAD_2112) + __clear_bit(AR5K_MODE_11A, caps->cap_mode); + + /* Set number of supported TX queues */ + if (ah->ah_version == AR5K_AR5210) + caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES_NOQCU; + else + caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; + + /* Newer hardware has PHY error counters */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5213A) + caps->cap_has_phyerr_counters = true; + else + caps->cap_has_phyerr_counters = false; + + /* MACs since AR5212 have MRR support */ + if (ah->ah_version == AR5K_AR5212) + caps->cap_has_mrr_support = true; + else + caps->cap_has_mrr_support = false; + + return 0; +} + +/* + * TODO: Following functions should be part of a new function + * set_capability + */ + +int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, + u16 assoc_id) +{ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} + +int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) +{ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c new file mode 100644 index 000000000..4b41160e5 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -0,0 +1,1105 @@ +/* + * Copyright (c) 2007-2008 Bruno Randolf <bruno@thinktube.com> + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2006 Devicescape Software, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/export.h> +#include <linux/moduleparam.h> +#include <linux/vmalloc.h> + +#include <linux/seq_file.h> +#include <linux/list.h> +#include "debug.h" +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +static unsigned int ath5k_debug; +module_param_named(debug, ath5k_debug, uint, 0); + + +/* debugfs: registers */ + +struct reg { + const char *name; + int addr; +}; + +#define REG_STRUCT_INIT(r) { #r, r } + +/* just a few random registers, might want to add more */ +static const struct reg regs[] = { + REG_STRUCT_INIT(AR5K_CR), + REG_STRUCT_INIT(AR5K_RXDP), + REG_STRUCT_INIT(AR5K_CFG), + REG_STRUCT_INIT(AR5K_IER), + REG_STRUCT_INIT(AR5K_BCR), + REG_STRUCT_INIT(AR5K_RTSD0), + REG_STRUCT_INIT(AR5K_RTSD1), + REG_STRUCT_INIT(AR5K_TXCFG), + REG_STRUCT_INIT(AR5K_RXCFG), + REG_STRUCT_INIT(AR5K_RXJLA), + REG_STRUCT_INIT(AR5K_MIBC), + REG_STRUCT_INIT(AR5K_TOPS), + REG_STRUCT_INIT(AR5K_RXNOFRM), + REG_STRUCT_INIT(AR5K_TXNOFRM), + REG_STRUCT_INIT(AR5K_RPGTO), + REG_STRUCT_INIT(AR5K_RFCNT), + REG_STRUCT_INIT(AR5K_MISC), + REG_STRUCT_INIT(AR5K_QCUDCU_CLKGT), + REG_STRUCT_INIT(AR5K_ISR), + REG_STRUCT_INIT(AR5K_PISR), + REG_STRUCT_INIT(AR5K_SISR0), + REG_STRUCT_INIT(AR5K_SISR1), + REG_STRUCT_INIT(AR5K_SISR2), + REG_STRUCT_INIT(AR5K_SISR3), + REG_STRUCT_INIT(AR5K_SISR4), + REG_STRUCT_INIT(AR5K_IMR), + REG_STRUCT_INIT(AR5K_PIMR), + REG_STRUCT_INIT(AR5K_SIMR0), + REG_STRUCT_INIT(AR5K_SIMR1), + REG_STRUCT_INIT(AR5K_SIMR2), + REG_STRUCT_INIT(AR5K_SIMR3), + REG_STRUCT_INIT(AR5K_SIMR4), + REG_STRUCT_INIT(AR5K_DCM_ADDR), + REG_STRUCT_INIT(AR5K_DCCFG), + REG_STRUCT_INIT(AR5K_CCFG), + REG_STRUCT_INIT(AR5K_CPC0), + REG_STRUCT_INIT(AR5K_CPC1), + REG_STRUCT_INIT(AR5K_CPC2), + REG_STRUCT_INIT(AR5K_CPC3), + REG_STRUCT_INIT(AR5K_CPCOVF), + REG_STRUCT_INIT(AR5K_RESET_CTL), + REG_STRUCT_INIT(AR5K_SLEEP_CTL), + REG_STRUCT_INIT(AR5K_INTPEND), + REG_STRUCT_INIT(AR5K_SFR), + REG_STRUCT_INIT(AR5K_PCICFG), + REG_STRUCT_INIT(AR5K_GPIOCR), + REG_STRUCT_INIT(AR5K_GPIODO), + REG_STRUCT_INIT(AR5K_SREV), +}; + +static void *reg_start(struct seq_file *seq, loff_t *pos) +{ + return *pos < ARRAY_SIZE(regs) ? (void *)®s[*pos] : NULL; +} + +static void reg_stop(struct seq_file *seq, void *p) +{ + /* nothing to do */ +} + +static void *reg_next(struct seq_file *seq, void *p, loff_t *pos) +{ + ++*pos; + return *pos < ARRAY_SIZE(regs) ? (void *)®s[*pos] : NULL; +} + +static int reg_show(struct seq_file *seq, void *p) +{ + struct ath5k_hw *ah = seq->private; + struct reg *r = p; + seq_printf(seq, "%-25s0x%08x\n", r->name, + ath5k_hw_reg_read(ah, r->addr)); + return 0; +} + +static const struct seq_operations registers_sops = { + .start = reg_start, + .next = reg_next, + .stop = reg_stop, + .show = reg_show +}; + +DEFINE_SEQ_ATTRIBUTE(registers); + +/* debugfs: beacons */ + +static ssize_t read_file_beacon(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + char buf[500]; + unsigned int len = 0; + unsigned int v; + u64 tsf; + + v = ath5k_hw_reg_read(ah, AR5K_BEACON); + len += scnprintf(buf + len, sizeof(buf) - len, + "%-24s0x%08x\tintval: %d\tTIM: 0x%x\n", + "AR5K_BEACON", v, v & AR5K_BEACON_PERIOD, + (v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S); + + len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n", + "AR5K_LAST_TSTP", ath5k_hw_reg_read(ah, AR5K_LAST_TSTP)); + + len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\n\n", + "AR5K_BEACON_CNT", ath5k_hw_reg_read(ah, AR5K_BEACON_CNT)); + + v = ath5k_hw_reg_read(ah, AR5K_TIMER0); + len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", + "AR5K_TIMER0 (TBTT)", v, v); + + v = ath5k_hw_reg_read(ah, AR5K_TIMER1); + len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", + "AR5K_TIMER1 (DMA)", v, v >> 3); + + v = ath5k_hw_reg_read(ah, AR5K_TIMER2); + len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", + "AR5K_TIMER2 (SWBA)", v, v >> 3); + + v = ath5k_hw_reg_read(ah, AR5K_TIMER3); + len += scnprintf(buf + len, sizeof(buf) - len, "%-24s0x%08x\tTU: %08x\n", + "AR5K_TIMER3 (ATIM)", v, v); + + tsf = ath5k_hw_get_tsf64(ah); + len += scnprintf(buf + len, sizeof(buf) - len, + "TSF\t\t0x%016llx\tTU: %08x\n", + (unsigned long long)tsf, TSF_TO_TU(tsf)); + + if (len > sizeof(buf)) + len = sizeof(buf); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_beacon(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + char buf[20]; + + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) + return -EFAULT; + + buf[count] = '\0'; + if (strncmp(buf, "disable", 7) == 0) { + AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); + pr_info("debugfs disable beacons\n"); + } else if (strncmp(buf, "enable", 6) == 0) { + AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); + pr_info("debugfs enable beacons\n"); + } + return count; +} + +static const struct file_operations fops_beacon = { + .read = read_file_beacon, + .write = write_file_beacon, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + + +/* debugfs: reset */ + +static ssize_t write_file_reset(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "debug file triggered reset\n"); + ieee80211_queue_work(ah->hw, &ah->reset_work); + return count; +} + +static const struct file_operations fops_reset = { + .write = write_file_reset, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = noop_llseek, +}; + + +/* debugfs: debug level */ + +static const struct { + enum ath5k_debug_level level; + const char *name; + const char *desc; +} dbg_info[] = { + { ATH5K_DEBUG_RESET, "reset", "reset and initialization" }, + { ATH5K_DEBUG_INTR, "intr", "interrupt handling" }, + { ATH5K_DEBUG_MODE, "mode", "mode init/setup" }, + { ATH5K_DEBUG_XMIT, "xmit", "basic xmit operation" }, + { ATH5K_DEBUG_BEACON, "beacon", "beacon handling" }, + { ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" }, + { ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" }, + { ATH5K_DEBUG_LED, "led", "LED management" }, + { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" }, + { ATH5K_DEBUG_DMA, "dma", "dma start/stop" }, + { ATH5K_DEBUG_ANI, "ani", "adaptive noise immunity" }, + { ATH5K_DEBUG_DESC, "desc", "descriptor chains" }, + { ATH5K_DEBUG_ANY, "all", "show all debug levels" }, +}; + +static ssize_t read_file_debug(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + char buf[700]; + unsigned int len = 0; + unsigned int i; + + len += scnprintf(buf + len, sizeof(buf) - len, + "DEBUG LEVEL: 0x%08x\n\n", ah->debug.level); + + for (i = 0; i < ARRAY_SIZE(dbg_info) - 1; i++) { + len += scnprintf(buf + len, sizeof(buf) - len, + "%10s %c 0x%08x - %s\n", dbg_info[i].name, + ah->debug.level & dbg_info[i].level ? '+' : ' ', + dbg_info[i].level, dbg_info[i].desc); + } + len += scnprintf(buf + len, sizeof(buf) - len, + "%10s %c 0x%08x - %s\n", dbg_info[i].name, + ah->debug.level == dbg_info[i].level ? '+' : ' ', + dbg_info[i].level, dbg_info[i].desc); + + if (len > sizeof(buf)) + len = sizeof(buf); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_debug(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + unsigned int i; + char buf[20]; + + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) + return -EFAULT; + + buf[count] = '\0'; + for (i = 0; i < ARRAY_SIZE(dbg_info); i++) { + if (strncmp(buf, dbg_info[i].name, + strlen(dbg_info[i].name)) == 0) { + ah->debug.level ^= dbg_info[i].level; /* toggle bit */ + break; + } + } + return count; +} + +static const struct file_operations fops_debug = { + .read = read_file_debug, + .write = write_file_debug, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + + +/* debugfs: antenna */ + +static ssize_t read_file_antenna(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + char buf[700]; + unsigned int len = 0; + unsigned int i; + unsigned int v; + + len += scnprintf(buf + len, sizeof(buf) - len, "antenna mode\t%d\n", + ah->ah_ant_mode); + len += scnprintf(buf + len, sizeof(buf) - len, "default antenna\t%d\n", + ah->ah_def_ant); + len += scnprintf(buf + len, sizeof(buf) - len, "tx antenna\t%d\n", + ah->ah_tx_ant); + + len += scnprintf(buf + len, sizeof(buf) - len, "\nANTENNA\t\tRX\tTX\n"); + for (i = 1; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) { + len += scnprintf(buf + len, sizeof(buf) - len, + "[antenna %d]\t%d\t%d\n", + i, ah->stats.antenna_rx[i], ah->stats.antenna_tx[i]); + } + len += scnprintf(buf + len, sizeof(buf) - len, "[invalid]\t%d\t%d\n", + ah->stats.antenna_rx[0], ah->stats.antenna_tx[0]); + + v = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + len += scnprintf(buf + len, sizeof(buf) - len, + "\nAR5K_DEFAULT_ANTENNA\t0x%08x\n", v); + + v = ath5k_hw_reg_read(ah, AR5K_STA_ID1); + len += scnprintf(buf + len, sizeof(buf) - len, + "AR5K_STA_ID1_DEFAULT_ANTENNA\t%d\n", + (v & AR5K_STA_ID1_DEFAULT_ANTENNA) != 0); + len += scnprintf(buf + len, sizeof(buf) - len, + "AR5K_STA_ID1_DESC_ANTENNA\t%d\n", + (v & AR5K_STA_ID1_DESC_ANTENNA) != 0); + len += scnprintf(buf + len, sizeof(buf) - len, + "AR5K_STA_ID1_RTS_DEF_ANTENNA\t%d\n", + (v & AR5K_STA_ID1_RTS_DEF_ANTENNA) != 0); + len += scnprintf(buf + len, sizeof(buf) - len, + "AR5K_STA_ID1_SELFGEN_DEF_ANT\t%d\n", + (v & AR5K_STA_ID1_SELFGEN_DEF_ANT) != 0); + + v = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL); + len += scnprintf(buf + len, sizeof(buf) - len, + "\nAR5K_PHY_AGCCTL_OFDM_DIV_DIS\t%d\n", + (v & AR5K_PHY_AGCCTL_OFDM_DIV_DIS) != 0); + + v = ath5k_hw_reg_read(ah, AR5K_PHY_RESTART); + len += scnprintf(buf + len, sizeof(buf) - len, + "AR5K_PHY_RESTART_DIV_GC\t\t%x\n", + (v & AR5K_PHY_RESTART_DIV_GC) >> AR5K_PHY_RESTART_DIV_GC_S); + + v = ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ANT_DIV); + len += scnprintf(buf + len, sizeof(buf) - len, + "AR5K_PHY_FAST_ANT_DIV_EN\t%d\n", + (v & AR5K_PHY_FAST_ANT_DIV_EN) != 0); + + v = ath5k_hw_reg_read(ah, AR5K_PHY_ANT_SWITCH_TABLE_0); + len += scnprintf(buf + len, sizeof(buf) - len, + "\nAR5K_PHY_ANT_SWITCH_TABLE_0\t0x%08x\n", v); + v = ath5k_hw_reg_read(ah, AR5K_PHY_ANT_SWITCH_TABLE_1); + len += scnprintf(buf + len, sizeof(buf) - len, + "AR5K_PHY_ANT_SWITCH_TABLE_1\t0x%08x\n", v); + + if (len > sizeof(buf)) + len = sizeof(buf); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_antenna(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + unsigned int i; + char buf[20]; + + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) + return -EFAULT; + + buf[count] = '\0'; + if (strncmp(buf, "diversity", 9) == 0) { + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT); + pr_info("debug: enable diversity\n"); + } else if (strncmp(buf, "fixed-a", 7) == 0) { + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_A); + pr_info("debug: fixed antenna A\n"); + } else if (strncmp(buf, "fixed-b", 7) == 0) { + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_B); + pr_info("debug: fixed antenna B\n"); + } else if (strncmp(buf, "clear", 5) == 0) { + for (i = 0; i < ARRAY_SIZE(ah->stats.antenna_rx); i++) { + ah->stats.antenna_rx[i] = 0; + ah->stats.antenna_tx[i] = 0; + } + pr_info("debug: cleared antenna stats\n"); + } + return count; +} + +static const struct file_operations fops_antenna = { + .read = read_file_antenna, + .write = write_file_antenna, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + +/* debugfs: misc */ + +static ssize_t read_file_misc(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + char buf[700]; + unsigned int len = 0; + u32 filt = ath5k_hw_get_rx_filter(ah); + + len += scnprintf(buf + len, sizeof(buf) - len, "bssid-mask: %pM\n", + ah->bssidmask); + len += scnprintf(buf + len, sizeof(buf) - len, "filter-flags: 0x%x ", + filt); + if (filt & AR5K_RX_FILTER_UCAST) + len += scnprintf(buf + len, sizeof(buf) - len, " UCAST"); + if (filt & AR5K_RX_FILTER_MCAST) + len += scnprintf(buf + len, sizeof(buf) - len, " MCAST"); + if (filt & AR5K_RX_FILTER_BCAST) + len += scnprintf(buf + len, sizeof(buf) - len, " BCAST"); + if (filt & AR5K_RX_FILTER_CONTROL) + len += scnprintf(buf + len, sizeof(buf) - len, " CONTROL"); + if (filt & AR5K_RX_FILTER_BEACON) + len += scnprintf(buf + len, sizeof(buf) - len, " BEACON"); + if (filt & AR5K_RX_FILTER_PROM) + len += scnprintf(buf + len, sizeof(buf) - len, " PROM"); + if (filt & AR5K_RX_FILTER_XRPOLL) + len += scnprintf(buf + len, sizeof(buf) - len, " XRPOLL"); + if (filt & AR5K_RX_FILTER_PROBEREQ) + len += scnprintf(buf + len, sizeof(buf) - len, " PROBEREQ"); + if (filt & AR5K_RX_FILTER_PHYERR_5212) + len += scnprintf(buf + len, sizeof(buf) - len, " PHYERR-5212"); + if (filt & AR5K_RX_FILTER_RADARERR_5212) + len += scnprintf(buf + len, sizeof(buf) - len, " RADARERR-5212"); + if (filt & AR5K_RX_FILTER_PHYERR_5211) + snprintf(buf + len, sizeof(buf) - len, " PHYERR-5211"); + if (filt & AR5K_RX_FILTER_RADARERR_5211) + len += scnprintf(buf + len, sizeof(buf) - len, " RADARERR-5211"); + + len += scnprintf(buf + len, sizeof(buf) - len, "\nopmode: %s (%d)\n", + ath_opmode_to_string(ah->opmode), ah->opmode); + + if (len > sizeof(buf)) + len = sizeof(buf); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static const struct file_operations fops_misc = { + .read = read_file_misc, + .open = simple_open, + .owner = THIS_MODULE, +}; + + +/* debugfs: frameerrors */ + +static ssize_t read_file_frameerrors(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + struct ath5k_statistics *st = &ah->stats; + char buf[700]; + unsigned int len = 0; + int i; + + len += scnprintf(buf + len, sizeof(buf) - len, + "RX\n---------------------\n"); + len += scnprintf(buf + len, sizeof(buf) - len, "CRC\t%u\t(%u%%)\n", + st->rxerr_crc, + st->rx_all_count > 0 ? + st->rxerr_crc * 100 / st->rx_all_count : 0); + len += scnprintf(buf + len, sizeof(buf) - len, "PHY\t%u\t(%u%%)\n", + st->rxerr_phy, + st->rx_all_count > 0 ? + st->rxerr_phy * 100 / st->rx_all_count : 0); + for (i = 0; i < 32; i++) { + if (st->rxerr_phy_code[i]) + len += scnprintf(buf + len, sizeof(buf) - len, + " phy_err[%u]\t%u\n", + i, st->rxerr_phy_code[i]); + } + + len += scnprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n", + st->rxerr_fifo, + st->rx_all_count > 0 ? + st->rxerr_fifo * 100 / st->rx_all_count : 0); + len += scnprintf(buf + len, sizeof(buf) - len, "decrypt\t%u\t(%u%%)\n", + st->rxerr_decrypt, + st->rx_all_count > 0 ? + st->rxerr_decrypt * 100 / st->rx_all_count : 0); + len += scnprintf(buf + len, sizeof(buf) - len, "MIC\t%u\t(%u%%)\n", + st->rxerr_mic, + st->rx_all_count > 0 ? + st->rxerr_mic * 100 / st->rx_all_count : 0); + len += scnprintf(buf + len, sizeof(buf) - len, "process\t%u\t(%u%%)\n", + st->rxerr_proc, + st->rx_all_count > 0 ? + st->rxerr_proc * 100 / st->rx_all_count : 0); + len += scnprintf(buf + len, sizeof(buf) - len, "jumbo\t%u\t(%u%%)\n", + st->rxerr_jumbo, + st->rx_all_count > 0 ? + st->rxerr_jumbo * 100 / st->rx_all_count : 0); + len += scnprintf(buf + len, sizeof(buf) - len, "[RX all\t%u]\n", + st->rx_all_count); + len += scnprintf(buf + len, sizeof(buf) - len, "RX-all-bytes\t%u\n", + st->rx_bytes_count); + + len += scnprintf(buf + len, sizeof(buf) - len, + "\nTX\n---------------------\n"); + len += scnprintf(buf + len, sizeof(buf) - len, "retry\t%u\t(%u%%)\n", + st->txerr_retry, + st->tx_all_count > 0 ? + st->txerr_retry * 100 / st->tx_all_count : 0); + len += scnprintf(buf + len, sizeof(buf) - len, "FIFO\t%u\t(%u%%)\n", + st->txerr_fifo, + st->tx_all_count > 0 ? + st->txerr_fifo * 100 / st->tx_all_count : 0); + len += scnprintf(buf + len, sizeof(buf) - len, "filter\t%u\t(%u%%)\n", + st->txerr_filt, + st->tx_all_count > 0 ? + st->txerr_filt * 100 / st->tx_all_count : 0); + len += scnprintf(buf + len, sizeof(buf) - len, "[TX all\t%u]\n", + st->tx_all_count); + len += scnprintf(buf + len, sizeof(buf) - len, "TX-all-bytes\t%u\n", + st->tx_bytes_count); + + if (len > sizeof(buf)) + len = sizeof(buf); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_frameerrors(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + struct ath5k_statistics *st = &ah->stats; + char buf[20]; + + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) + return -EFAULT; + + buf[count] = '\0'; + if (strncmp(buf, "clear", 5) == 0) { + st->rxerr_crc = 0; + st->rxerr_phy = 0; + st->rxerr_fifo = 0; + st->rxerr_decrypt = 0; + st->rxerr_mic = 0; + st->rxerr_proc = 0; + st->rxerr_jumbo = 0; + st->rx_all_count = 0; + st->txerr_retry = 0; + st->txerr_fifo = 0; + st->txerr_filt = 0; + st->tx_all_count = 0; + pr_info("debug: cleared frameerrors stats\n"); + } + return count; +} + +static const struct file_operations fops_frameerrors = { + .read = read_file_frameerrors, + .write = write_file_frameerrors, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + + +/* debugfs: ani */ + +static ssize_t read_file_ani(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + struct ath5k_statistics *st = &ah->stats; + struct ath5k_ani_state *as = &ah->ani_state; + + char buf[700]; + unsigned int len = 0; + + len += scnprintf(buf + len, sizeof(buf) - len, + "HW has PHY error counters:\t%s\n", + ah->ah_capabilities.cap_has_phyerr_counters ? + "yes" : "no"); + len += scnprintf(buf + len, sizeof(buf) - len, + "HW max spur immunity level:\t%d\n", + as->max_spur_level); + len += scnprintf(buf + len, sizeof(buf) - len, + "\nANI state\n--------------------------------------------\n"); + len += scnprintf(buf + len, sizeof(buf) - len, "operating mode:\t\t\t"); + switch (as->ani_mode) { + case ATH5K_ANI_MODE_OFF: + len += scnprintf(buf + len, sizeof(buf) - len, "OFF\n"); + break; + case ATH5K_ANI_MODE_MANUAL_LOW: + len += scnprintf(buf + len, sizeof(buf) - len, + "MANUAL LOW\n"); + break; + case ATH5K_ANI_MODE_MANUAL_HIGH: + len += scnprintf(buf + len, sizeof(buf) - len, + "MANUAL HIGH\n"); + break; + case ATH5K_ANI_MODE_AUTO: + len += scnprintf(buf + len, sizeof(buf) - len, "AUTO\n"); + break; + default: + len += scnprintf(buf + len, sizeof(buf) - len, + "??? (not good)\n"); + break; + } + len += scnprintf(buf + len, sizeof(buf) - len, + "noise immunity level:\t\t%d\n", + as->noise_imm_level); + len += scnprintf(buf + len, sizeof(buf) - len, + "spur immunity level:\t\t%d\n", + as->spur_level); + len += scnprintf(buf + len, sizeof(buf) - len, + "firstep level:\t\t\t%d\n", + as->firstep_level); + len += scnprintf(buf + len, sizeof(buf) - len, + "OFDM weak signal detection:\t%s\n", + as->ofdm_weak_sig ? "on" : "off"); + len += scnprintf(buf + len, sizeof(buf) - len, + "CCK weak signal detection:\t%s\n", + as->cck_weak_sig ? "on" : "off"); + + len += scnprintf(buf + len, sizeof(buf) - len, + "\nMIB INTERRUPTS:\t\t%u\n", + st->mib_intr); + len += scnprintf(buf + len, sizeof(buf) - len, + "beacon RSSI average:\t%d\n", + (int)ewma_beacon_rssi_read(&ah->ah_beacon_rssi_avg)); + +#define CC_PRINT(_struct, _field) \ + _struct._field, \ + _struct.cycles > 0 ? \ + _struct._field * 100 / _struct.cycles : 0 + + len += scnprintf(buf + len, sizeof(buf) - len, + "profcnt tx\t\t%u\t(%d%%)\n", + CC_PRINT(as->last_cc, tx_frame)); + len += scnprintf(buf + len, sizeof(buf) - len, + "profcnt rx\t\t%u\t(%d%%)\n", + CC_PRINT(as->last_cc, rx_frame)); + len += scnprintf(buf + len, sizeof(buf) - len, + "profcnt busy\t\t%u\t(%d%%)\n", + CC_PRINT(as->last_cc, rx_busy)); +#undef CC_PRINT + len += scnprintf(buf + len, sizeof(buf) - len, "profcnt cycles\t\t%u\n", + as->last_cc.cycles); + len += scnprintf(buf + len, sizeof(buf) - len, + "listen time\t\t%d\tlast: %d\n", + as->listen_time, as->last_listen); + len += scnprintf(buf + len, sizeof(buf) - len, + "OFDM errors\t\t%u\tlast: %u\tsum: %u\n", + as->ofdm_errors, as->last_ofdm_errors, + as->sum_ofdm_errors); + len += scnprintf(buf + len, sizeof(buf) - len, + "CCK errors\t\t%u\tlast: %u\tsum: %u\n", + as->cck_errors, as->last_cck_errors, + as->sum_cck_errors); + len += scnprintf(buf + len, sizeof(buf) - len, + "AR5K_PHYERR_CNT1\t%x\t(=%d)\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1), + ATH5K_ANI_OFDM_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT1))); + len += scnprintf(buf + len, sizeof(buf) - len, + "AR5K_PHYERR_CNT2\t%x\t(=%d)\n", + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2), + ATH5K_ANI_CCK_TRIG_HIGH - (ATH5K_PHYERR_CNT_MAX - + ath5k_hw_reg_read(ah, AR5K_PHYERR_CNT2))); + + if (len > sizeof(buf)) + len = sizeof(buf); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_ani(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + char buf[20]; + + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) + return -EFAULT; + + buf[count] = '\0'; + if (strncmp(buf, "sens-low", 8) == 0) { + ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_HIGH); + } else if (strncmp(buf, "sens-high", 9) == 0) { + ath5k_ani_init(ah, ATH5K_ANI_MODE_MANUAL_LOW); + } else if (strncmp(buf, "ani-off", 7) == 0) { + ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF); + } else if (strncmp(buf, "ani-on", 6) == 0) { + ath5k_ani_init(ah, ATH5K_ANI_MODE_AUTO); + } else if (strncmp(buf, "noise-low", 9) == 0) { + ath5k_ani_set_noise_immunity_level(ah, 0); + } else if (strncmp(buf, "noise-high", 10) == 0) { + ath5k_ani_set_noise_immunity_level(ah, + ATH5K_ANI_MAX_NOISE_IMM_LVL); + } else if (strncmp(buf, "spur-low", 8) == 0) { + ath5k_ani_set_spur_immunity_level(ah, 0); + } else if (strncmp(buf, "spur-high", 9) == 0) { + ath5k_ani_set_spur_immunity_level(ah, + ah->ani_state.max_spur_level); + } else if (strncmp(buf, "fir-low", 7) == 0) { + ath5k_ani_set_firstep_level(ah, 0); + } else if (strncmp(buf, "fir-high", 8) == 0) { + ath5k_ani_set_firstep_level(ah, ATH5K_ANI_MAX_FIRSTEP_LVL); + } else if (strncmp(buf, "ofdm-off", 8) == 0) { + ath5k_ani_set_ofdm_weak_signal_detection(ah, false); + } else if (strncmp(buf, "ofdm-on", 7) == 0) { + ath5k_ani_set_ofdm_weak_signal_detection(ah, true); + } else if (strncmp(buf, "cck-off", 7) == 0) { + ath5k_ani_set_cck_weak_signal_detection(ah, false); + } else if (strncmp(buf, "cck-on", 6) == 0) { + ath5k_ani_set_cck_weak_signal_detection(ah, true); + } + return count; +} + +static const struct file_operations fops_ani = { + .read = read_file_ani, + .write = write_file_ani, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + + +/* debugfs: queues etc */ + +static ssize_t read_file_queue(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + char buf[700]; + unsigned int len = 0; + + struct ath5k_txq *txq; + struct ath5k_buf *bf, *bf0; + int i, n; + + len += scnprintf(buf + len, sizeof(buf) - len, + "available txbuffers: %d\n", ah->txbuf_len); + + for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) { + txq = &ah->txqs[i]; + + len += scnprintf(buf + len, sizeof(buf) - len, + "%02d: %ssetup\n", i, txq->setup ? "" : "not "); + + if (!txq->setup) + continue; + + n = 0; + spin_lock_bh(&txq->lock); + list_for_each_entry_safe(bf, bf0, &txq->q, list) + n++; + spin_unlock_bh(&txq->lock); + + len += scnprintf(buf + len, sizeof(buf) - len, + " len: %d bufs: %d\n", txq->txq_len, n); + len += scnprintf(buf + len, sizeof(buf) - len, + " stuck: %d\n", txq->txq_stuck); + } + + if (len > sizeof(buf)) + len = sizeof(buf); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_queue(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_hw *ah = file->private_data; + char buf[20]; + + count = min_t(size_t, count, sizeof(buf) - 1); + if (copy_from_user(buf, userbuf, count)) + return -EFAULT; + + buf[count] = '\0'; + if (strncmp(buf, "start", 5) == 0) + ieee80211_wake_queues(ah->hw); + else if (strncmp(buf, "stop", 4) == 0) + ieee80211_stop_queues(ah->hw); + + return count; +} + + +static const struct file_operations fops_queue = { + .read = read_file_queue, + .write = write_file_queue, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + +/* debugfs: eeprom */ + +struct eeprom_private { + u16 *buf; + int len; +}; + +static int open_file_eeprom(struct inode *inode, struct file *file) +{ + struct eeprom_private *ep; + struct ath5k_hw *ah = inode->i_private; + bool res; + int i, ret; + u32 eesize; /* NB: in 16-bit words */ + u16 val, *buf; + + /* Get eeprom size */ + + res = ath5k_hw_nvram_read(ah, AR5K_EEPROM_SIZE_UPPER, &val); + if (!res) + return -EACCES; + + if (val == 0) { + eesize = AR5K_EEPROM_INFO_MAX + AR5K_EEPROM_INFO_BASE; + } else { + eesize = (val & AR5K_EEPROM_SIZE_UPPER_MASK) << + AR5K_EEPROM_SIZE_ENDLOC_SHIFT; + ath5k_hw_nvram_read(ah, AR5K_EEPROM_SIZE_LOWER, &val); + eesize = eesize | val; + } + + if (eesize > 4096) + return -EINVAL; + + /* Create buffer and read in eeprom */ + + buf = vmalloc(array_size(eesize, 2)); + if (!buf) { + ret = -ENOMEM; + goto err; + } + + for (i = 0; i < eesize; ++i) { + if (!ath5k_hw_nvram_read(ah, i, &val)) { + ret = -EIO; + goto freebuf; + } + buf[i] = val; + } + + /* Create private struct and assign to file */ + + ep = kmalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) { + ret = -ENOMEM; + goto freebuf; + } + + ep->buf = buf; + ep->len = eesize * 2; + + file->private_data = (void *)ep; + + return 0; + +freebuf: + vfree(buf); +err: + return ret; + +} + +static ssize_t read_file_eeprom(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct eeprom_private *ep = file->private_data; + + return simple_read_from_buffer(user_buf, count, ppos, ep->buf, ep->len); +} + +static int release_file_eeprom(struct inode *inode, struct file *file) +{ + struct eeprom_private *ep = file->private_data; + + vfree(ep->buf); + kfree(ep); + + return 0; +} + +static const struct file_operations fops_eeprom = { + .open = open_file_eeprom, + .read = read_file_eeprom, + .release = release_file_eeprom, + .owner = THIS_MODULE, +}; + + +void +ath5k_debug_init_device(struct ath5k_hw *ah) +{ + struct dentry *phydir; + + ah->debug.level = ath5k_debug; + + phydir = debugfs_create_dir("ath5k", ah->hw->wiphy->debugfsdir); + if (!phydir) + return; + + debugfs_create_file("debug", 0600, phydir, ah, &fops_debug); + debugfs_create_file("registers", 0400, phydir, ah, ®isters_fops); + debugfs_create_file("beacon", 0600, phydir, ah, &fops_beacon); + debugfs_create_file("reset", 0200, phydir, ah, &fops_reset); + debugfs_create_file("antenna", 0600, phydir, ah, &fops_antenna); + debugfs_create_file("misc", 0400, phydir, ah, &fops_misc); + debugfs_create_file("eeprom", 0400, phydir, ah, &fops_eeprom); + debugfs_create_file("frameerrors", 0600, phydir, ah, &fops_frameerrors); + debugfs_create_file("ani", 0600, phydir, ah, &fops_ani); + debugfs_create_file("queue", 0600, phydir, ah, &fops_queue); + debugfs_create_bool("32khz_clock", 0600, phydir, + &ah->ah_use_32khz_clock); +} + +/* functions used in other places */ + +void +ath5k_debug_dump_bands(struct ath5k_hw *ah) +{ + unsigned int b, i; + + if (likely(!(ah->debug.level & ATH5K_DEBUG_DUMPBANDS))) + return; + + for (b = 0; b < NUM_NL80211_BANDS; b++) { + struct ieee80211_supported_band *band = &ah->sbands[b]; + char bname[6]; + switch (band->band) { + case NL80211_BAND_2GHZ: + strcpy(bname, "2 GHz"); + break; + case NL80211_BAND_5GHZ: + strcpy(bname, "5 GHz"); + break; + default: + printk(KERN_DEBUG "Band not supported: %d\n", + band->band); + return; + } + printk(KERN_DEBUG "Band %s: channels %d, rates %d\n", bname, + band->n_channels, band->n_bitrates); + printk(KERN_DEBUG " channels:\n"); + for (i = 0; i < band->n_channels; i++) + printk(KERN_DEBUG " %3d %d %.4x %.4x\n", + ieee80211_frequency_to_channel( + band->channels[i].center_freq), + band->channels[i].center_freq, + band->channels[i].hw_value, + band->channels[i].flags); + printk(KERN_DEBUG " rates:\n"); + for (i = 0; i < band->n_bitrates; i++) + printk(KERN_DEBUG " %4d %.4x %.4x %.4x\n", + band->bitrates[i].bitrate, + band->bitrates[i].hw_value, + band->bitrates[i].flags, + band->bitrates[i].hw_value_short); + } +} + +static inline void +ath5k_debug_printrxbuf(struct ath5k_buf *bf, int done, + struct ath5k_rx_status *rs) +{ + struct ath5k_desc *ds = bf->desc; + struct ath5k_hw_all_rx_desc *rd = &ds->ud.ds_rx; + + printk(KERN_DEBUG "R (%p %llx) %08x %08x %08x %08x %08x %08x %c\n", + ds, (unsigned long long)bf->daddr, + ds->ds_link, ds->ds_data, + rd->rx_ctl.rx_control_0, rd->rx_ctl.rx_control_1, + rd->rx_stat.rx_status_0, rd->rx_stat.rx_status_1, + !done ? ' ' : (rs->rs_status == 0) ? '*' : '!'); +} + +void +ath5k_debug_printrxbuffs(struct ath5k_hw *ah) +{ + struct ath5k_desc *ds; + struct ath5k_buf *bf; + struct ath5k_rx_status rs = {}; + int status; + + if (likely(!(ah->debug.level & ATH5K_DEBUG_DESC))) + return; + + printk(KERN_DEBUG "rxdp %x, rxlink %p\n", + ath5k_hw_get_rxdp(ah), ah->rxlink); + + spin_lock_bh(&ah->rxbuflock); + list_for_each_entry(bf, &ah->rxbuf, list) { + ds = bf->desc; + status = ah->ah_proc_rx_desc(ah, ds, &rs); + if (!status) + ath5k_debug_printrxbuf(bf, status == 0, &rs); + } + spin_unlock_bh(&ah->rxbuflock); +} + +void +ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf) +{ + struct ath5k_desc *ds = bf->desc; + struct ath5k_hw_5212_tx_desc *td = &ds->ud.ds_tx5212; + struct ath5k_tx_status ts = {}; + int done; + + if (likely(!(ah->debug.level & ATH5K_DEBUG_DESC))) + return; + + done = ah->ah_proc_tx_desc(ah, bf->desc, &ts); + + printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x " + "%08x %c\n", ds, (unsigned long long)bf->daddr, ds->ds_link, + ds->ds_data, td->tx_ctl.tx_control_0, td->tx_ctl.tx_control_1, + td->tx_ctl.tx_control_2, td->tx_ctl.tx_control_3, + td->tx_stat.tx_status_0, td->tx_stat.tx_status_1, + done ? ' ' : (ts.ts_status == 0) ? '*' : '!'); +} diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h new file mode 100644 index 000000000..0a3f916a1 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/debug.h @@ -0,0 +1,165 @@ +/* + * Copyright (c) 2007 Bruno Randolf <bruno@thinktube.com> + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2006 Devicescape Software, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + */ + +#ifndef _ATH5K_DEBUG_H +#define _ATH5K_DEBUG_H + +struct ath5k_hw; +struct sk_buff; +struct ath5k_buf; + +struct ath5k_dbg_info { + unsigned int level; /* debug level */ +}; + +/** + * enum ath5k_debug_level - ath5k debug level + * + * @ATH5K_DEBUG_RESET: reset processing + * @ATH5K_DEBUG_INTR: interrupt handling + * @ATH5K_DEBUG_MODE: mode init/setup + * @ATH5K_DEBUG_XMIT: basic xmit operation + * @ATH5K_DEBUG_BEACON: beacon handling + * @ATH5K_DEBUG_CALIBRATE: periodic calibration + * @ATH5K_DEBUG_TXPOWER: transmit power setting + * @ATH5K_DEBUG_LED: led management + * @ATH5K_DEBUG_DUMP_RX: print received skb content + * @ATH5K_DEBUG_DUMP_TX: print transmit skb content + * @ATH5K_DEBUG_DUMPBANDS: dump bands + * @ATH5K_DEBUG_DMA: debug dma start/stop + * @ATH5K_DEBUG_TRACE: trace function calls + * @ATH5K_DEBUG_DESC: descriptor setup + * @ATH5K_DEBUG_ANY: show at any debug level + * + * The debug level is used to control the amount and type of debugging output + * we want to see. The debug level is given in calls to ATH5K_DBG to specify + * where the message should appear, and the user can control the debugging + * messages he wants to see, either by the module parameter 'debug' on module + * load, or dynamically by using debugfs 'ath5k/phyX/debug'. these levels can + * be combined together by bitwise OR. + */ +enum ath5k_debug_level { + ATH5K_DEBUG_RESET = 0x00000001, + ATH5K_DEBUG_INTR = 0x00000002, + ATH5K_DEBUG_MODE = 0x00000004, + ATH5K_DEBUG_XMIT = 0x00000008, + ATH5K_DEBUG_BEACON = 0x00000010, + ATH5K_DEBUG_CALIBRATE = 0x00000020, + ATH5K_DEBUG_TXPOWER = 0x00000040, + ATH5K_DEBUG_LED = 0x00000080, + ATH5K_DEBUG_DUMPBANDS = 0x00000400, + ATH5K_DEBUG_DMA = 0x00000800, + ATH5K_DEBUG_ANI = 0x00002000, + ATH5K_DEBUG_DESC = 0x00004000, + ATH5K_DEBUG_ANY = 0xffffffff +}; + +#ifdef CONFIG_ATH5K_DEBUG + +#define ATH5K_DBG(_sc, _m, _fmt, ...) do { \ + if (unlikely((_sc)->debug.level & (_m) && net_ratelimit())) \ + ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \ + __func__, __LINE__, ##__VA_ARGS__); \ + } while (0) + +#define ATH5K_DBG_UNLIMIT(_sc, _m, _fmt, ...) do { \ + if (unlikely((_sc)->debug.level & (_m))) \ + ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \ + __func__, __LINE__, ##__VA_ARGS__); \ + } while (0) + +void +ath5k_debug_init_device(struct ath5k_hw *ah); + +void +ath5k_debug_printrxbuffs(struct ath5k_hw *ah); + +void +ath5k_debug_dump_bands(struct ath5k_hw *ah); + +void +ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf); + +#else /* no debugging */ + +#include <linux/compiler.h> + +static inline __printf(3, 4) void +ATH5K_DBG(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...) {} + +static inline __printf(3, 4) void +ATH5K_DBG_UNLIMIT(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...) +{} + +static inline void +ath5k_debug_init_device(struct ath5k_hw *ah) {} + +static inline void +ath5k_debug_printrxbuffs(struct ath5k_hw *ah) {} + +static inline void +ath5k_debug_dump_bands(struct ath5k_hw *ah) {} + +static inline void +ath5k_debug_printtxbuf(struct ath5k_hw *ah, struct ath5k_buf *bf) {} + +#endif /* ifdef CONFIG_ATH5K_DEBUG */ + +#endif /* ifndef _ATH5K_DEBUG_H */ diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c new file mode 100644 index 000000000..80f751394 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -0,0 +1,786 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/******************************\ + Hardware Descriptor Functions +\******************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + + +/** + * DOC: Hardware descriptor functions + * + * Here we handle the processing of the low-level hw descriptors + * that hw reads and writes via DMA for each TX and RX attempt (that means + * we can also have descriptors for failed TX/RX tries). We have two kind of + * descriptors for RX and TX, control descriptors tell the hw how to send or + * receive a packet where to read/write it from/to etc and status descriptors + * that contain information about how the packet was sent or received (errors + * included). + * + * Descriptor format is not exactly the same for each MAC chip version so we + * have function pointers on &struct ath5k_hw we initialize at runtime based on + * the chip used. + */ + + +/************************\ +* TX Control descriptors * +\************************/ + +/** + * ath5k_hw_setup_2word_tx_desc() - Initialize a 2-word tx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @pkt_len: Frame length in bytes + * @hdr_len: Header length in bytes (only used on AR5210) + * @padsize: Any padding we've added to the frame length + * @type: One of enum ath5k_pkt_type + * @tx_power: Tx power in 0.5dB steps + * @tx_rate0: HW idx for transmission rate + * @tx_tries0: Max number of retransmissions + * @key_index: Index on key table to use for encryption + * @antenna_mode: Which antenna to use (0 for auto) + * @flags: One of AR5K_TXDESC_* flags (desc.h) + * @rtscts_rate: HW idx for RTS/CTS transmission rate + * @rtscts_duration: What to put on duration field on the header of RTS/CTS + * + * Internal function to initialize a 2-Word TX control descriptor + * found on AR5210 and AR5211 MACs chips. + * + * Returns 0 on success or -EINVAL on false input + */ +static int +ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, + int padsize, + enum ath5k_pkt_type type, + unsigned int tx_power, + unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, + unsigned int antenna_mode, + unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) +{ + u32 frame_type; + struct ath5k_hw_2w_tx_ctl *tx_ctl; + unsigned int frame_len; + + tx_ctl = &desc->ud.ds_tx5210.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continuously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Clear descriptor */ + memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + /* remove padding we might have added before */ + frame_len = pkt_len - padsize + FCS_LEN; + + if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if (type == AR5K_PKT_TYPE_BEACON) + pkt_len = roundup(pkt_len, 4); + + if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; + + /* + * Verify and set header length (only 5210) + */ + if (ah->ah_version == AR5K_AR5210) { + if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN_5210) + return -EINVAL; + tx_ctl->tx_control_0 |= + AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN_5210); + } + + /*Differences between 5210-5211*/ + if (ah->ah_version == AR5K_AR5210) { + switch (type) { + case AR5K_PKT_TYPE_BEACON: + case AR5K_PKT_TYPE_PROBE_RESP: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + break; + case AR5K_PKT_TYPE_PIFS: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + break; + default: + frame_type = type; + break; + } + + tx_ctl->tx_control_0 |= + AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_5210) | + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + + } else { + tx_ctl->tx_control_0 |= + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | + AR5K_REG_SM(antenna_mode, + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_ctl->tx_control_1 |= + AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_5211); + } + +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_2W_TX_DESC_CTL##_c##_##_flag; \ + } +#define _TX_FLAGS_5211(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_2W_TX_DESC_CTL##_c##_##_flag##_5211; \ + } + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + + if (ah->ah_version == AR5K_AR5211) { + _TX_FLAGS_5211(0, VEOL); + _TX_FLAGS_5211(1, NOACK); + } + +#undef _TX_FLAGS +#undef _TX_FLAGS_5211 + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + tx_ctl->tx_control_0 |= + AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + tx_ctl->tx_control_1 |= + AR5K_REG_SM(key_index, + AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX); + } + + /* + * RTS/CTS Duration [5210 ?] + */ + if ((ah->ah_version == AR5K_AR5210) && + (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) + tx_ctl->tx_control_1 |= rtscts_duration & + AR5K_2W_TX_DESC_CTL1_RTS_DURATION_5210; + + return 0; +} + +/** + * ath5k_hw_setup_4word_tx_desc() - Initialize a 4-word tx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @pkt_len: Frame length in bytes + * @hdr_len: Header length in bytes (only used on AR5210) + * @padsize: Any padding we've added to the frame length + * @type: One of enum ath5k_pkt_type + * @tx_power: Tx power in 0.5dB steps + * @tx_rate0: HW idx for transmission rate + * @tx_tries0: Max number of retransmissions + * @key_index: Index on key table to use for encryption + * @antenna_mode: Which antenna to use (0 for auto) + * @flags: One of AR5K_TXDESC_* flags (desc.h) + * @rtscts_rate: HW idx for RTS/CTS transmission rate + * @rtscts_duration: What to put on duration field on the header of RTS/CTS + * + * Internal function to initialize a 4-Word TX control descriptor + * found on AR5212 and later MACs chips. + * + * Returns 0 on success or -EINVAL on false input + */ +static int +ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, + int padsize, + enum ath5k_pkt_type type, + unsigned int tx_power, + unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, + unsigned int antenna_mode, + unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + unsigned int frame_len; + + /* + * Use local variables for these to reduce load/store access on + * uncached memory + */ + u32 txctl0 = 0, txctl1 = 0, txctl2 = 0, txctl3 = 0; + + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continuously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + tx_power += ah->ah_txpower.txp_offset; + if (tx_power > AR5K_TUNE_MAX_TXPOWER) + tx_power = AR5K_TUNE_MAX_TXPOWER; + + /* Clear descriptor status area */ + memset(&desc->ud.ds_tx5212.tx_stat, 0, + sizeof(desc->ud.ds_tx5212.tx_stat)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + /* remove padding we might have added before */ + frame_len = pkt_len - padsize + FCS_LEN; + + if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + txctl0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if (type == AR5K_PKT_TYPE_BEACON) + pkt_len = roundup(pkt_len, 4); + + if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + txctl1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; + + txctl0 |= AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | + AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); + txctl1 |= AR5K_REG_SM(type, AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); + txctl2 = AR5K_REG_SM(tx_tries0, AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); + txctl3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + txctl##_c |= AR5K_4W_TX_DESC_CTL##_c##_##_flag; \ + } + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(0, CTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + txctl0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + txctl1 |= AR5K_REG_SM(key_index, + AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_IDX); + } + + /* + * RTS/CTS + */ + if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { + if ((flags & AR5K_TXDESC_RTSENA) && + (flags & AR5K_TXDESC_CTSENA)) + return -EINVAL; + txctl2 |= rtscts_duration & AR5K_4W_TX_DESC_CTL2_RTS_DURATION; + txctl3 |= AR5K_REG_SM(rtscts_rate, + AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); + } + + tx_ctl->tx_control_0 = txctl0; + tx_ctl->tx_control_1 = txctl1; + tx_ctl->tx_control_2 = txctl2; + tx_ctl->tx_control_3 = txctl3; + + return 0; +} + +/** + * ath5k_hw_setup_mrr_tx_desc() - Initialize an MRR tx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @tx_rate1: HW idx for rate used on transmission series 1 + * @tx_tries1: Max number of retransmissions for transmission series 1 + * @tx_rate2: HW idx for rate used on transmission series 2 + * @tx_tries2: Max number of retransmissions for transmission series 2 + * @tx_rate3: HW idx for rate used on transmission series 3 + * @tx_tries3: Max number of retransmissions for transmission series 3 + * + * Multi rate retry (MRR) tx control descriptors are available only on AR5212 + * MACs, they are part of the normal 4-word tx control descriptor (see above) + * but we handle them through a separate function for better abstraction. + * + * Returns 0 on success or -EINVAL on invalid input + */ +int +ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + u_int tx_rate1, u_int tx_tries1, + u_int tx_rate2, u_int tx_tries2, + u_int tx_rate3, u_int tx_tries3) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + + /* no mrr support for cards older than 5212 */ + if (ah->ah_version < AR5K_AR5212) + return 0; + + /* + * Rates can be 0 as long as the retry count is 0 too. + * A zero rate and nonzero retry count will put the HW into a mode where + * it continuously sends noise on the channel, so it is important to + * avoid this. + */ + if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || + (tx_rate2 == 0 && tx_tries2 != 0) || + (tx_rate3 == 0 && tx_tries3 != 0))) { + ATH5K_ERR(ah, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + if (ah->ah_version == AR5K_AR5212) { + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + +#define _XTX_TRIES(_n) \ + if (tx_tries##_n) { \ + tx_ctl->tx_control_2 |= \ + AR5K_REG_SM(tx_tries##_n, \ + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ + tx_ctl->tx_control_3 |= \ + AR5K_REG_SM(tx_rate##_n, \ + AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ + } + + _XTX_TRIES(1); + _XTX_TRIES(2); + _XTX_TRIES(3); + +#undef _XTX_TRIES + + return 1; + } + + return 0; +} + + +/***********************\ +* TX Status descriptors * +\***********************/ + +/** + * ath5k_hw_proc_2word_tx_status() - Process a tx status descriptor on 5210/1 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @ts: The &struct ath5k_tx_status + */ +static int +ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_tx_status *ts) +{ + struct ath5k_hw_tx_status *tx_status; + + tx_status = &desc->ud.ds_tx5210.tx_stat; + + /* No frame has been send or error */ + if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_final_retry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + /*TODO: ts->ts_virtcol + test*/ + ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = 1; + ts->ts_status = 0; + ts->ts_final_idx = 0; + + if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/** + * ath5k_hw_proc_4word_tx_status() - Process a tx status descriptor on 5212 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @ts: The &struct ath5k_tx_status + */ +static int +ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_tx_status *ts) +{ + struct ath5k_hw_tx_status *tx_status; + u32 txstat0, txstat1; + + tx_status = &desc->ud.ds_tx5212.tx_stat; + + txstat1 = READ_ONCE(tx_status->tx_status_1); + + /* No frame has been send or error */ + if (unlikely(!(txstat1 & AR5K_DESC_TX_STATUS1_DONE))) + return -EINPROGRESS; + + txstat0 = READ_ONCE(tx_status->tx_status_0); + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(txstat0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(txstat0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_final_retry = AR5K_REG_MS(txstat0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + ts->ts_seqnum = AR5K_REG_MS(txstat1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(txstat1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = (txstat1 & + AR5K_DESC_TX_STATUS1_XMIT_ANTENNA_5212) ? 2 : 1; + ts->ts_status = 0; + + ts->ts_final_idx = AR5K_REG_MS(txstat1, + AR5K_DESC_TX_STATUS1_FINAL_TS_IX_5212); + + /* TX error */ + if (!(txstat0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (txstat0 & AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (txstat0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (txstat0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + + +/****************\ +* RX Descriptors * +\****************/ + +/** + * ath5k_hw_setup_rx_desc() - Initialize an rx control descriptor + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @size: RX buffer length in bytes + * @flags: One of AR5K_RXDESC_* flags + */ +int +ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, + u32 size, unsigned int flags) +{ + struct ath5k_hw_rx_ctl *rx_ctl; + + rx_ctl = &desc->ud.ds_rx.rx_ctl; + + /* + * Clear the descriptor + * If we don't clean the status descriptor, + * while scanning we get too many results, + * most of them virtual, after some secs + * of scanning system hangs. M.F. + */ + memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); + + if (unlikely(size & ~AR5K_DESC_RX_CTL1_BUF_LEN)) + return -EINVAL; + + /* Setup descriptor */ + rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; + + if (flags & AR5K_RXDESC_INTREQ) + rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; + + return 0; +} + +/** + * ath5k_hw_proc_5210_rx_status() - Process the rx status descriptor on 5210/1 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @rs: The &struct ath5k_rx_status + * + * Internal function used to process an RX status descriptor + * on AR5210/5211 MAC. + * + * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e + * frame yet. + */ +static int +ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + + rx_status = &desc->ud.ds_rx.rx_stat; + + /* No frame received / not ready */ + if (unlikely(!(rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_DONE))) + return -EINPROGRESS; + + memset(rs, 0, sizeof(struct ath5k_rx_status)); + + /* + * Frame receive status + */ + rs->rs_datalen = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_more = !!(rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_MORE); + /* TODO: this timestamp is 13 bit, later on we assume 15 bit! + * also the HAL code for 5210 says the timestamp is bits [10..22] of the + * TSF, and extends the timestamp here to 15 bit. + * we need to check on 5210... + */ + rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + + if (ah->ah_version == AR5K_AR5211) + rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5211); + else + rs->rs_antenna = (rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5210) + ? 2 : 1; + + /* + * Key table status + */ + if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID) + rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_KEY_INDEX); + else + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + /* only on 5210 */ + if ((ah->ah_version == AR5K_AR5210) && + (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN_5210)) + rs->rs_status |= AR5K_RXERR_FIFO; + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); + } + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + } + + return 0; +} + +/** + * ath5k_hw_proc_5212_rx_status() - Process the rx status descriptor on 5212 + * @ah: The &struct ath5k_hw + * @desc: The &struct ath5k_desc + * @rs: The &struct ath5k_rx_status + * + * Internal function used to process an RX status descriptor + * on AR5212 and later MAC. + * + * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e + * frame yet. + */ +static int +ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, + struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + u32 rxstat0, rxstat1; + + rx_status = &desc->ud.ds_rx.rx_stat; + rxstat1 = READ_ONCE(rx_status->rx_status_1); + + /* No frame received / not ready */ + if (unlikely(!(rxstat1 & AR5K_5212_RX_DESC_STATUS1_DONE))) + return -EINPROGRESS; + + memset(rs, 0, sizeof(struct ath5k_rx_status)); + rxstat0 = READ_ONCE(rx_status->rx_status_0); + + /* + * Frame receive status + */ + rs->rs_datalen = rxstat0 & AR5K_5212_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rxstat0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rxstat0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_antenna = AR5K_REG_MS(rxstat0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA); + rs->rs_more = !!(rxstat0 & AR5K_5212_RX_DESC_STATUS0_MORE); + rs->rs_tstamp = AR5K_REG_MS(rxstat1, + AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + + /* + * Key table status + */ + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) + rs->rs_keyix = AR5K_REG_MS(rxstat1, + AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); + else + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rxstat1 & AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr = AR5K_REG_MS(rxstat1, + AR5K_5212_RX_DESC_STATUS1_PHY_ERROR_CODE); + if (!ah->ah_capabilities.cap_has_phyerr_counters) + ath5k_ani_phy_error_report(ah, rs->rs_phyerr); + } + + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + + if (rxstat1 & AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) + rs->rs_status |= AR5K_RXERR_MIC; + } + return 0; +} + + +/********\ +* Attach * +\********/ + +/** + * ath5k_hw_init_desc_functions() - Init function pointers inside ah + * @ah: The &struct ath5k_hw + * + * Maps the internal descriptor functions to the function pointers on ah, used + * from above. This is used as an abstraction layer to handle the various chips + * the same way. + */ +int +ath5k_hw_init_desc_functions(struct ath5k_hw *ah) +{ + if (ah->ah_version == AR5K_AR5212) { + ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; + ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; + } else if (ah->ah_version <= AR5K_AR5211) { + ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; + ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; + } else + return -ENOTSUPP; + return 0; +} diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h new file mode 100644 index 000000000..8d6c01a49 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/desc.h @@ -0,0 +1,367 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * RX/TX descriptor structures + */ + +/** + * struct ath5k_hw_rx_ctl - Common hardware RX control descriptor + * @rx_control_0: RX control word 0 + * @rx_control_1: RX control word 1 + */ +struct ath5k_hw_rx_ctl { + u32 rx_control_0; + u32 rx_control_1; +} __packed __aligned(4); + +/* RX control word 1 fields/flags */ +#define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff /* data buffer length */ +#define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 /* RX interrupt request */ + +/** + * struct ath5k_hw_rx_status - Common hardware RX status descriptor + * @rx_status_0: RX status word 0 + * @rx_status_1: RX status word 1 + * + * 5210, 5211 and 5212 differ only in the fields and flags defined below + */ +struct ath5k_hw_rx_status { + u32 rx_status_0; + u32 rx_status_1; +} __packed __aligned(4); + +/* 5210/5211 */ +/* RX status word 0 fields/flags */ +#define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff /* RX data length */ +#define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000 /* more desc for this frame */ +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5210 0x00004000 /* [5210] receive on ant 1 */ +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000 /* reception rate */ +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE_S 15 +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x07f80000 /* rssi */ +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19 +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5211 0x38000000 /* [5211] receive antenna */ +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5211_S 27 + +/* RX status word 1 fields/flags */ +#define AR5K_5210_RX_DESC_STATUS1_DONE 0x00000001 /* descriptor complete */ +#define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 /* reception success */ +#define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 /* CRC error */ +#define AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN_5210 0x00000008 /* [5210] FIFO overrun */ +#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decryption CRC failure */ +#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR 0x000000e0 /* PHY error */ +#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR_S 5 +#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 /* key index valid */ +#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decryption key index */ +#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_S 9 +#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000 /* 13 bit of TSF */ +#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15 +#define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000 /* key cache miss */ + +/* 5212 */ +/* RX status word 0 fields/flags */ +#define AR5K_5212_RX_DESC_STATUS0_DATA_LEN 0x00000fff /* RX data length */ +#define AR5K_5212_RX_DESC_STATUS0_MORE 0x00001000 /* more desc for this frame */ +#define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000 /* decompression CRC error */ +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE 0x000f8000 /* reception rate */ +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE_S 15 +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x0ff00000 /* rssi */ +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20 +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000 /* receive antenna */ +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28 + +/* RX status word 1 fields/flags */ +#define AR5K_5212_RX_DESC_STATUS1_DONE 0x00000001 /* descriptor complete */ +#define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 /* frame reception success */ +#define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR 0x00000004 /* CRC error */ +#define AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000008 /* decryption CRC failure */ +#define AR5K_5212_RX_DESC_STATUS1_PHY_ERROR 0x00000010 /* PHY error */ +#define AR5K_5212_RX_DESC_STATUS1_MIC_ERROR 0x00000020 /* MIC decrypt error */ +#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 /* key index valid */ +#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX 0x0000fe00 /* decryption key index */ +#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_S 9 +#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x7fff0000 /* first 15bit of the TSF */ +#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 16 +#define AR5K_5212_RX_DESC_STATUS1_KEY_CACHE_MISS 0x80000000 /* key cache miss */ +#define AR5K_5212_RX_DESC_STATUS1_PHY_ERROR_CODE 0x0000ff00 /* phy error code overlays key index and valid fields */ +#define AR5K_5212_RX_DESC_STATUS1_PHY_ERROR_CODE_S 8 + +/** + * enum ath5k_phy_error_code - PHY Error codes + * @AR5K_RX_PHY_ERROR_UNDERRUN: Transmit underrun, [5210] No error + * @AR5K_RX_PHY_ERROR_TIMING: Timing error + * @AR5K_RX_PHY_ERROR_PARITY: Illegal parity + * @AR5K_RX_PHY_ERROR_RATE: Illegal rate + * @AR5K_RX_PHY_ERROR_LENGTH: Illegal length + * @AR5K_RX_PHY_ERROR_RADAR: Radar detect, [5210] 64 QAM rate + * @AR5K_RX_PHY_ERROR_SERVICE: Illegal service + * @AR5K_RX_PHY_ERROR_TOR: Transmit override receive + * @AR5K_RX_PHY_ERROR_OFDM_TIMING: OFDM Timing error [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY: OFDM Signal parity error [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL: OFDM Illegal rate [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_LENGTH_ILLEGAL: OFDM Illegal length [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_POWER_DROP: OFDM Power drop [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_SERVICE: OFDM Service (?) [5212+] + * @AR5K_RX_PHY_ERROR_OFDM_RESTART: OFDM Restart (?) [5212+] + * @AR5K_RX_PHY_ERROR_CCK_TIMING: CCK Timing error [5212+] + * @AR5K_RX_PHY_ERROR_CCK_HEADER_CRC: Header CRC error [5212+] + * @AR5K_RX_PHY_ERROR_CCK_RATE_ILLEGAL: Illegal rate [5212+] + * @AR5K_RX_PHY_ERROR_CCK_SERVICE: CCK Service (?) [5212+] + * @AR5K_RX_PHY_ERROR_CCK_RESTART: CCK Restart (?) [5212+] + */ +enum ath5k_phy_error_code { + AR5K_RX_PHY_ERROR_UNDERRUN = 0, + AR5K_RX_PHY_ERROR_TIMING = 1, + AR5K_RX_PHY_ERROR_PARITY = 2, + AR5K_RX_PHY_ERROR_RATE = 3, + AR5K_RX_PHY_ERROR_LENGTH = 4, + AR5K_RX_PHY_ERROR_RADAR = 5, + AR5K_RX_PHY_ERROR_SERVICE = 6, + AR5K_RX_PHY_ERROR_TOR = 7, + AR5K_RX_PHY_ERROR_OFDM_TIMING = 17, + AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY = 18, + AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL = 19, + AR5K_RX_PHY_ERROR_OFDM_LENGTH_ILLEGAL = 20, + AR5K_RX_PHY_ERROR_OFDM_POWER_DROP = 21, + AR5K_RX_PHY_ERROR_OFDM_SERVICE = 22, + AR5K_RX_PHY_ERROR_OFDM_RESTART = 23, + AR5K_RX_PHY_ERROR_CCK_TIMING = 25, + AR5K_RX_PHY_ERROR_CCK_HEADER_CRC = 26, + AR5K_RX_PHY_ERROR_CCK_RATE_ILLEGAL = 27, + AR5K_RX_PHY_ERROR_CCK_SERVICE = 30, + AR5K_RX_PHY_ERROR_CCK_RESTART = 31, +}; + +/** + * struct ath5k_hw_2w_tx_ctl - 5210/5211 hardware 2-word TX control descriptor + * @tx_control_0: TX control word 0 + * @tx_control_1: TX control word 1 + */ +struct ath5k_hw_2w_tx_ctl { + u32 tx_control_0; + u32 tx_control_1; +} __packed __aligned(4); + +/* TX control word 0 fields/flags */ +#define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff /* frame length */ +#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_5210 0x0003f000 /* [5210] header length */ +#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_5210_S 12 +#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE 0x003c0000 /* tx rate */ +#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE_S 18 +#define AR5K_2W_TX_DESC_CTL0_RTSENA 0x00400000 /* RTS/CTS enable */ +#define AR5K_2W_TX_DESC_CTL0_LONG_PACKET_5210 0x00800000 /* [5210] long packet */ +#define AR5K_2W_TX_DESC_CTL0_VEOL_5211 0x00800000 /* [5211] virtual end-of-list */ +#define AR5K_2W_TX_DESC_CTL0_CLRDMASK 0x01000000 /* clear destination mask */ +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000 /* [5210] antenna selection */ +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000 /* [5211] antenna selection */ +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 +#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_5210 0x1c000000 /* [5210] frame type */ +#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_5210_S 26 +#define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000 /* TX interrupt request */ +#define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 /* key is valid */ + +/* TX control word 1 fields/flags */ +#define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff /* data buffer length */ +#define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000 /* more desc for this frame */ +#define AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_5210 0x0007e000 /* [5210] key table index */ +#define AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_5211 0x000fe000 /* [5211] key table index */ +#define AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_5210 : \ + AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_5211) +#define AR5K_2W_TX_DESC_CTL1_ENC_KEY_IDX_S 13 +#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_5211 0x00700000 /* [5211] frame type */ +#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_5211_S 20 +#define AR5K_2W_TX_DESC_CTL1_NOACK_5211 0x00800000 /* [5211] no ACK */ +#define AR5K_2W_TX_DESC_CTL1_RTS_DURATION_5210 0xfff80000 /* [5210] lower 13 bit of duration */ + +/* Frame types */ +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 1 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 2 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY 3 +#define AR5K_AR5211_TX_DESC_FRAME_TYPE_BEACON 3 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS 4 +#define AR5K_AR5211_TX_DESC_FRAME_TYPE_PRESP 4 + +/** + * struct ath5k_hw_4w_tx_ctl - 5212 hardware 4-word TX control descriptor + * @tx_control_0: TX control word 0 + * @tx_control_1: TX control word 1 + * @tx_control_2: TX control word 2 + * @tx_control_3: TX control word 3 + */ +struct ath5k_hw_4w_tx_ctl { + u32 tx_control_0; + u32 tx_control_1; + u32 tx_control_2; + u32 tx_control_3; +} __packed __aligned(4); + +/* TX control word 0 fields/flags */ +#define AR5K_4W_TX_DESC_CTL0_FRAME_LEN 0x00000fff /* frame length */ +#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER 0x003f0000 /* transmit power */ +#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER_S 16 +#define AR5K_4W_TX_DESC_CTL0_RTSENA 0x00400000 /* RTS/CTS enable */ +#define AR5K_4W_TX_DESC_CTL0_VEOL 0x00800000 /* virtual end-of-list */ +#define AR5K_4W_TX_DESC_CTL0_CLRDMASK 0x01000000 /* clear destination mask */ +#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT 0x1e000000 /* TX antenna selection */ +#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 +#define AR5K_4W_TX_DESC_CTL0_INTREQ 0x20000000 /* TX interrupt request */ +#define AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 /* destination index valid */ +#define AR5K_4W_TX_DESC_CTL0_CTSENA 0x80000000 /* precede frame with CTS */ + +/* TX control word 1 fields/flags */ +#define AR5K_4W_TX_DESC_CTL1_BUF_LEN 0x00000fff /* data buffer length */ +#define AR5K_4W_TX_DESC_CTL1_MORE 0x00001000 /* more desc for this frame */ +#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_IDX 0x000fe000 /* destination table index */ +#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_IDX_S 13 +#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE 0x00f00000 /* frame type */ +#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE_S 20 +#define AR5K_4W_TX_DESC_CTL1_NOACK 0x01000000 /* no ACK */ +#define AR5K_4W_TX_DESC_CTL1_COMP_PROC 0x06000000 /* compression processing */ +#define AR5K_4W_TX_DESC_CTL1_COMP_PROC_S 25 +#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN 0x18000000 /* length of frame IV */ +#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN_S 27 +#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN 0x60000000 /* length of frame ICV */ +#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN_S 29 + +/* TX control word 2 fields/flags */ +#define AR5K_4W_TX_DESC_CTL2_RTS_DURATION 0x00007fff /* RTS/CTS duration */ +#define AR5K_4W_TX_DESC_CTL2_DURATION_UPD_EN 0x00008000 /* frame duration update */ +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0 0x000f0000 /* series 0 max attempts */ +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0_S 16 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1 0x00f00000 /* series 1 max attempts */ +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1_S 20 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2 0x0f000000 /* series 2 max attempts */ +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2_S 24 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3 0xf0000000 /* series 3 max attempts */ +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3_S 28 + +/* TX control word 3 fields/flags */ +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE0 0x0000001f /* series 0 tx rate */ +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1 0x000003e0 /* series 1 tx rate */ +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1_S 5 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2 0x00007c00 /* series 2 tx rate */ +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2_S 10 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3 0x000f8000 /* series 3 tx rate */ +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3_S 15 +#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE 0x01f00000 /* RTS or CTS rate */ +#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S 20 + +/** + * struct ath5k_hw_tx_status - Common TX status descriptor + * @tx_status_0: TX status word 0 + * @tx_status_1: TX status word 1 + */ +struct ath5k_hw_tx_status { + u32 tx_status_0; + u32 tx_status_1; +} __packed __aligned(4); + +/* TX status word 0 fields/flags */ +#define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001 /* TX success */ +#define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002 /* excessive retries */ +#define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004 /* FIFO underrun */ +#define AR5K_DESC_TX_STATUS0_FILTERED 0x00000008 /* TX filter indication */ +/* according to the HAL sources the spec has short/long retry counts reversed. + * we have it reversed to the HAL sources as well, for 5210 and 5211. + * For 5212 these fields are defined as RTS_FAIL_COUNT and DATA_FAIL_COUNT, + * but used respectively as SHORT and LONG retry count in the code later. This + * is consistent with the definitions here... TODO: check */ +#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT 0x000000f0 /* short retry count */ +#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT_S 4 +#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT 0x00000f00 /* long retry count */ +#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT_S 8 +#define AR5K_DESC_TX_STATUS0_VIRTCOLL_CT_5211 0x0000f000 /* [5211+] virtual collision count */ +#define AR5K_DESC_TX_STATUS0_VIRTCOLL_CT_5212_S 12 +#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000 /* TX timestamp */ +#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16 + +/* TX status word 1 fields/flags */ +#define AR5K_DESC_TX_STATUS1_DONE 0x00000001 /* descriptor complete */ +#define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe /* TX sequence number */ +#define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1 +#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH 0x001fe000 /* signal strength of ACK */ +#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH_S 13 +#define AR5K_DESC_TX_STATUS1_FINAL_TS_IX_5212 0x00600000 /* [5212] final TX attempt series ix */ +#define AR5K_DESC_TX_STATUS1_FINAL_TS_IX_5212_S 21 +#define AR5K_DESC_TX_STATUS1_COMP_SUCCESS_5212 0x00800000 /* [5212] compression status */ +#define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA_5212 0x01000000 /* [5212] transmit antenna */ + +/** + * struct ath5k_hw_5210_tx_desc - 5210/5211 hardware TX descriptor + * @tx_ctl: The &struct ath5k_hw_2w_tx_ctl + * @tx_stat: The &struct ath5k_hw_tx_status + */ +struct ath5k_hw_5210_tx_desc { + struct ath5k_hw_2w_tx_ctl tx_ctl; + struct ath5k_hw_tx_status tx_stat; +} __packed __aligned(4); + +/** + * struct ath5k_hw_5212_tx_desc - 5212 hardware TX descriptor + * @tx_ctl: The &struct ath5k_hw_4w_tx_ctl + * @tx_stat: The &struct ath5k_hw_tx_status + */ +struct ath5k_hw_5212_tx_desc { + struct ath5k_hw_4w_tx_ctl tx_ctl; + struct ath5k_hw_tx_status tx_stat; +} __packed __aligned(4); + +/** + * struct ath5k_hw_all_rx_desc - Common hardware RX descriptor + * @rx_ctl: The &struct ath5k_hw_rx_ctl + * @rx_stat: The &struct ath5k_hw_rx_status + */ +struct ath5k_hw_all_rx_desc { + struct ath5k_hw_rx_ctl rx_ctl; + struct ath5k_hw_rx_status rx_stat; +} __packed __aligned(4); + +/** + * struct ath5k_desc - Atheros hardware DMA descriptor + * @ds_link: Physical address of the next descriptor + * @ds_data: Physical address of data buffer (skb) + * @ud: Union containing hw_5xxx_tx_desc structs and hw_all_rx_desc + * + * This is read and written to by the hardware + */ +struct ath5k_desc { + u32 ds_link; + u32 ds_data; + + union { + struct ath5k_hw_5210_tx_desc ds_tx5210; + struct ath5k_hw_5212_tx_desc ds_tx5212; + struct ath5k_hw_all_rx_desc ds_rx; + } ud; +} __packed __aligned(4); + +#define AR5K_RXDESC_INTREQ 0x0020 + +#define AR5K_TXDESC_CLRDMASK 0x0001 +#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ +#define AR5K_TXDESC_RTSENA 0x0004 +#define AR5K_TXDESC_CTSENA 0x0008 +#define AR5K_TXDESC_INTREQ 0x0010 +#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c new file mode 100644 index 000000000..d9e376eb0 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -0,0 +1,913 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* DMA and interrupt masking functions * +\*************************************/ + +/** + * DOC: DMA and interrupt masking functions + * + * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and + * handle queue setup for 5210 chipset (rest are handled on qcu.c). + * Also we setup interrupt mask register (IMR) and read the various interrupt + * status registers (ISR). + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + + +/*********\ +* Receive * +\*********/ + +/** + * ath5k_hw_start_rx_dma() - Start DMA receive + * @ah: The &struct ath5k_hw + */ +void +ath5k_hw_start_rx_dma(struct ath5k_hw *ah) +{ + ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); +} + +/** + * ath5k_hw_stop_rx_dma() - Stop DMA receive + * @ah: The &struct ath5k_hw + */ +static int +ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) +{ + unsigned int i; + + ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); + + /* + * It may take some time to disable the DMA receive unit + */ + for (i = 1000; i > 0 && + (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; + i--) + udelay(100); + + if (!i) + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "failed to stop RX DMA !\n"); + + return i ? 0 : -EBUSY; +} + +/** + * ath5k_hw_get_rxdp() - Get RX Descriptor's address + * @ah: The &struct ath5k_hw + */ +u32 +ath5k_hw_get_rxdp(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_RXDP); +} + +/** + * ath5k_hw_set_rxdp() - Set RX Descriptor's address + * @ah: The &struct ath5k_hw + * @phys_addr: RX descriptor address + * + * Returns -EIO if rx is active + */ +int +ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) +{ + if (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) { + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "tried to set RXDP while rx was active !\n"); + return -EIO; + } + + ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); + return 0; +} + + +/**********\ +* Transmit * +\**********/ + +/** + * ath5k_hw_start_tx_dma() - Start DMA transmit for a specific queue + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Start DMA transmit for a specific queue and since 5210 doesn't have + * QCU/DCU, set up queue parameters for 5210 here based on queue type (one + * queue for normal data and one queue for beacons). For queue setup + * on newer chips check out qcu.c. Returns -EINVAL if queue number is out + * of range or if queue is already disabled. + * + * NOTE: Must be called after setting up tx control descriptor for that + * queue (see below). + */ +int +ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + u32 tx_queue; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EINVAL; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set the queue by type on 5210 + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; + break; + case AR5K_TX_QUEUE_BEACON: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BSR); + break; + case AR5K_TX_QUEUE_CAB: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | + AR5K_BCR_BDMAE, AR5K_BSR); + break; + default: + return -EINVAL; + } + /* Start queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* Return if queue is disabled */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) + return -EIO; + + /* Start queue */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); + } + + return 0; +} + +/** + * ath5k_hw_stop_tx_dma() - Stop DMA transmit on a specific queue + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Stop DMA transmit on a specific hw queue and drain queue so we don't + * have any pending frames. Returns -EBUSY if we still have pending frames, + * -EINVAL if queue number is out of range or inactive. + */ +static int +ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + unsigned int i = 40; + u32 tx_queue, pending; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EINVAL; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set by queue type + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + /* XXX Fix me... */ + tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, 0, AR5K_BSR); + break; + default: + return -EINVAL; + } + + /* Stop queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + + /* + * Enable DCU early termination to quickly + * flush any pending frames from QCU + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_DCU_EARLY); + + /* + * Schedule TX disable and wait until queue is empty + */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); + + /* Wait for queue to stop */ + for (i = 1000; i > 0 && + (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue) != 0); + i--) + udelay(100); + + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "queue %i didn't stop !\n", queue); + + /* Check for pending frames */ + i = 1000; + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + /* For 2413+ order PCU to drop packets using + * QUIET mechanism */ + if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) && + pending) { + /* Set periodicity and duration */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)| + AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR), + AR5K_QUIET_CTL2); + + /* Enable quiet period for current TSF */ + ath5k_hw_reg_write(ah, + AR5K_QUIET_CTL1_QT_EN | + AR5K_REG_SM(ath5k_hw_reg_read(ah, + AR5K_TSF_L32_5211) >> 10, + AR5K_QUIET_CTL1_NEXT_QT_TSF), + AR5K_QUIET_CTL1); + + /* Force channel idle high */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_CHANNEL_IDLE_HIGH); + + /* Wait a while and disable mechanism */ + udelay(400); + AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1, + AR5K_QUIET_CTL1_QT_EN); + + /* Re-check for pending frames */ + i = 100; + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_CHANNEL_IDLE_HIGH); + + if (pending) + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "quiet mechanism didn't work q:%i !\n", + queue); + } + + /* + * Disable DCU early termination + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_DCU_EARLY); + + /* Clear register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + if (pending) { + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "tx dma didn't stop (q:%i, frm:%i) !\n", + queue, pending); + return -EBUSY; + } + } + + /* TODO: Check for success on 5210 else return error */ + return 0; +} + +/** + * ath5k_hw_stop_beacon_queue() - Stop beacon queue + * @ah: The &struct ath5k_hw + * @queue: The queue number + * + * Returns -EIO if queue didn't stop + */ +int +ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue) +{ + int ret; + ret = ath5k_hw_stop_tx_dma(ah, queue); + if (ret) { + ATH5K_DBG(ah, ATH5K_DEBUG_DMA, + "beacon queue didn't stop !\n"); + return -EIO; + } + return 0; +} + +/** + * ath5k_hw_get_txdp() - Get TX Descriptor's address for a specific queue + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Get TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and use tx queue type since we only have 2 queues. + * We use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just read the corresponding TXDP register. + * + * XXX: Is TXDP read and clear ? + */ +u32 +ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) +{ + u16 tx_reg; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Get the transmit queue descriptor pointer from the selected queue + */ + /*5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return 0xffffffff; + } + } else { + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + return ath5k_hw_reg_read(ah, tx_reg); +} + +/** + * ath5k_hw_set_txdp() - Set TX Descriptor's address for a specific queue + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * @phys_addr: The physical address + * + * Set TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and we use tx queue type since we only have 2 queues + * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just set the corresponding TXDP register. + * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still + * active. + */ +int +ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) +{ + u16 tx_reg; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Set the transmit queue descriptor pointer register by type + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return -EINVAL; + } + } else { + /* + * Set the transmit queue descriptor pointer for + * the selected queue on QCU for 5211+ + * (this won't work if the queue is still active) + */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return -EIO; + + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + /* Set descriptor pointer */ + ath5k_hw_reg_write(ah, phys_addr, tx_reg); + + return 0; +} + +/** + * ath5k_hw_update_tx_triglevel() - Update tx trigger level + * @ah: The &struct ath5k_hw + * @increase: Flag to force increase of trigger level + * + * This function increases/decreases the tx trigger level for the tx fifo + * buffer (aka FIFO threshold) that is used to indicate when PCU flushes + * the buffer and transmits its data. Lowering this results sending small + * frames more quickly but can lead to tx underruns, raising it a lot can + * result other problems. Right now we start with the lowest possible + * (64Bytes) and if we get tx underrun we increase it using the increase + * flag. Returns -EIO if we have reached maximum/minimum. + * + * XXX: Link this with tx DMA size ? + * XXX2: Use it to save interrupts ? + */ +int +ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) +{ + u32 trigger_level, imr; + int ret = -EIO; + + /* + * Disable interrupts by setting the mask + */ + imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); + + trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), + AR5K_TXCFG_TXFULL); + + if (!increase) { + if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) + goto done; + } else + trigger_level += + ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); + + /* + * Update trigger level on success + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); + else + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_TXFULL, trigger_level); + + ret = 0; + +done: + /* + * Restore interrupt mask + */ + ath5k_hw_set_imr(ah, imr); + + return ret; +} + + +/*******************\ +* Interrupt masking * +\*******************/ + +/** + * ath5k_hw_is_intr_pending() - Check if we have pending interrupts + * @ah: The &struct ath5k_hw + * + * Check if we have pending interrupts to process. Returns 1 if we + * have pending interrupts and 0 if we haven't. + */ +bool +ath5k_hw_is_intr_pending(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0; +} + +/** + * ath5k_hw_get_isr() - Get interrupt status + * @ah: The @struct ath5k_hw + * @interrupt_mask: Driver's interrupt mask used to filter out + * interrupts in sw. + * + * This function is used inside our interrupt handler to determine the reason + * for the interrupt by reading Primary Interrupt Status Register. Returns an + * abstract interrupt status mask which is mostly ISR with some uncommon bits + * being mapped on some standard non hw-specific positions + * (check out &ath5k_int). + * + * NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this + * function gets called are cleared on return. + */ +int +ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) +{ + u32 data = 0; + + /* + * Read interrupt status from Primary Interrupt + * Register. + * + * Note: PISR/SISR Not available on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + u32 isr = 0; + isr = ath5k_hw_reg_read(ah, AR5K_ISR); + if (unlikely(isr == AR5K_INT_NOCARD)) { + *interrupt_mask = isr; + return -ENODEV; + } + + /* + * Filter out the non-common bits from the interrupt + * status. + */ + *interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr; + + /* Hanlde INT_FATAL */ + if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT + | AR5K_ISR_DPERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successful assoc + some jiffies. + interrupt_mask &= ~AR5K_INT_BMISS; + */ + + data = isr; + } else { + u32 pisr = 0; + u32 pisr_clear = 0; + u32 sisr0 = 0; + u32 sisr1 = 0; + u32 sisr2 = 0; + u32 sisr3 = 0; + u32 sisr4 = 0; + + /* Read PISR and SISRs... */ + pisr = ath5k_hw_reg_read(ah, AR5K_PISR); + if (unlikely(pisr == AR5K_INT_NOCARD)) { + *interrupt_mask = pisr; + return -ENODEV; + } + + sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0); + sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1); + sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2); + sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3); + sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4); + + /* + * PISR holds the logical OR of interrupt bits + * from SISR registers: + * + * TXOK and TXDESC -> Logical OR of TXOK and TXDESC + * per-queue bits on SISR0 + * + * TXERR and TXEOL -> Logical OR of TXERR and TXEOL + * per-queue bits on SISR1 + * + * TXURN -> Logical OR of TXURN per-queue bits on SISR2 + * + * HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2 + * + * BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC + * BCN_TIMEOUT, CAB_TIMEOUT and DTIM + * (and TSFOOR ?) bits on SISR2 + * + * QCBRORN and QCBRURN -> Logical OR of QCBRORN and + * QCBRURN per-queue bits on SISR3 + * QTRIG -> Logical OR of QTRIG per-queue bits on SISR4 + * + * If we clean these bits on PISR we 'll also clear all + * related bits from SISRs, e.g. if we write the TXOK bit on + * PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK + * interrupt got fired for another queue while we were reading + * the interrupt registers and we write back the TXOK bit on + * PISR we 'll lose it. So make sure that we don't write back + * on PISR any bits that come from SISRs. Clearing them from + * SISRs will also clear PISR so no need to worry here. + */ + + /* XXX: There seems to be an issue on some cards + * with tx interrupt flags not being updated + * on PISR despite that all Tx interrupt bits + * are cleared on SISRs. Since we handle all + * Tx queues all together it shouldn't be an + * issue if we clear Tx interrupt flags also + * on PISR to avoid that. + */ + pisr_clear = (pisr & ~AR5K_ISR_BITS_FROM_SISRS) | + (pisr & AR5K_INT_TX_ALL); + + /* + * Write to clear them... + * Note: This means that each bit we write back + * to the registers will get cleared, leaving the + * rest unaffected. So this won't affect new interrupts + * we didn't catch while reading/processing, we 'll get + * them next time get_isr gets called. + */ + ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0); + ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1); + ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2); + ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3); + ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4); + ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR); + /* Flush previous write */ + ath5k_hw_reg_read(ah, AR5K_PISR); + + /* + * Filter out the non-common bits from the interrupt + * status. + */ + *interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr; + + ah->ah_txq_isr_txok_all = 0; + + /* We treat TXOK,TXDESC, TXERR and TXEOL + * the same way (schedule the tx tasklet) + * so we track them all together per queue */ + if (pisr & AR5K_ISR_TXOK) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0, + AR5K_SISR0_QCU_TXOK); + + if (pisr & AR5K_ISR_TXDESC) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0, + AR5K_SISR0_QCU_TXDESC); + + if (pisr & AR5K_ISR_TXERR) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1, + AR5K_SISR1_QCU_TXERR); + + if (pisr & AR5K_ISR_TXEOL) + ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1, + AR5K_SISR1_QCU_TXEOL); + + /* Misc Beacon related interrupts */ + + /* For AR5211 */ + if (pisr & AR5K_ISR_TIM) + *interrupt_mask |= AR5K_INT_TIM; + + /* For AR5212+ */ + if (pisr & AR5K_ISR_BCNMISC) { + if (sisr2 & AR5K_SISR2_TIM) + *interrupt_mask |= AR5K_INT_TIM; + if (sisr2 & AR5K_SISR2_DTIM) + *interrupt_mask |= AR5K_INT_DTIM; + if (sisr2 & AR5K_SISR2_DTIM_SYNC) + *interrupt_mask |= AR5K_INT_DTIM_SYNC; + if (sisr2 & AR5K_SISR2_BCN_TIMEOUT) + *interrupt_mask |= AR5K_INT_BCN_TIMEOUT; + if (sisr2 & AR5K_SISR2_CAB_TIMEOUT) + *interrupt_mask |= AR5K_INT_CAB_TIMEOUT; + } + + /* Below interrupts are unlikely to happen */ + + /* HIU = Host Interface Unit (PCI etc) + * Can be one of MCABT, SSERR, DPERR from SISR2 */ + if (unlikely(pisr & (AR5K_ISR_HIUERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /*Beacon Not Ready*/ + if (unlikely(pisr & (AR5K_ISR_BNR))) + *interrupt_mask |= AR5K_INT_BNR; + + /* A queue got CBR overrun */ + if (unlikely(pisr & (AR5K_ISR_QCBRORN))) + *interrupt_mask |= AR5K_INT_QCBRORN; + + /* A queue got CBR underrun */ + if (unlikely(pisr & (AR5K_ISR_QCBRURN))) + *interrupt_mask |= AR5K_INT_QCBRURN; + + /* A queue got triggered */ + if (unlikely(pisr & (AR5K_ISR_QTRIG))) + *interrupt_mask |= AR5K_INT_QTRIG; + + data = pisr; + } + + /* + * In case we didn't handle anything, + * print the register value. + */ + if (unlikely(*interrupt_mask == 0 && net_ratelimit())) + ATH5K_PRINTF("ISR: 0x%08x IMR: 0x%08x\n", data, ah->ah_imr); + + return 0; +} + +/** + * ath5k_hw_set_imr() - Set interrupt mask + * @ah: The &struct ath5k_hw + * @new_mask: The new interrupt mask to be set + * + * Set the interrupt mask in hw to save interrupts. We do that by mapping + * ath5k_int bits to hw-specific bits to remove abstraction and writing + * Interrupt Mask Register. + */ +enum ath5k_int +ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) +{ + enum ath5k_int old_mask, int_mask; + + old_mask = ah->ah_imr; + + /* + * Disable card interrupts to prevent any race conditions + * (they will be re-enabled afterwards if AR5K_INT GLOBAL + * is set again on the new mask). + */ + if (old_mask & AR5K_INT_GLOBAL) { + ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + } + + /* + * Add additional, chipset-dependent interrupt mask flags + * and write them to the IMR (interrupt mask register). + */ + int_mask = new_mask & AR5K_INT_COMMON; + + if (ah->ah_version != AR5K_AR5210) { + /* Preserve per queue TXURN interrupt mask */ + u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2) + & AR5K_SIMR2_QCU_TXURN; + + /* Fatal interrupt abstraction for 5211+ */ + if (new_mask & AR5K_INT_FATAL) { + int_mask |= AR5K_IMR_HIUERR; + simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR + | AR5K_SIMR2_DPERR); + } + + /* Misc beacon related interrupts */ + if (new_mask & AR5K_INT_TIM) + int_mask |= AR5K_IMR_TIM; + + if (new_mask & AR5K_INT_TIM) + simr2 |= AR5K_SISR2_TIM; + if (new_mask & AR5K_INT_DTIM) + simr2 |= AR5K_SISR2_DTIM; + if (new_mask & AR5K_INT_DTIM_SYNC) + simr2 |= AR5K_SISR2_DTIM_SYNC; + if (new_mask & AR5K_INT_BCN_TIMEOUT) + simr2 |= AR5K_SISR2_BCN_TIMEOUT; + if (new_mask & AR5K_INT_CAB_TIMEOUT) + simr2 |= AR5K_SISR2_CAB_TIMEOUT; + + /*Beacon Not Ready*/ + if (new_mask & AR5K_INT_BNR) + int_mask |= AR5K_INT_BNR; + + /* Note: Per queue interrupt masks + * are set via ath5k_hw_reset_tx_queue() (qcu.c) */ + ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); + ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2); + + } else { + /* Fatal interrupt abstraction for 5210 */ + if (new_mask & AR5K_INT_FATAL) + int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT + | AR5K_IMR_HIUERR | AR5K_IMR_DPERR); + + /* Only common interrupts left for 5210 (no SIMRs) */ + ath5k_hw_reg_write(ah, int_mask, AR5K_IMR); + } + + /* If RXNOFRM interrupt is masked disable it + * by setting AR5K_RXNOFRM to zero */ + if (!(new_mask & AR5K_INT_RXNOFRM)) + ath5k_hw_reg_write(ah, 0, AR5K_RXNOFRM); + + /* Store new interrupt mask */ + ah->ah_imr = new_mask; + + /* ..re-enable interrupts if AR5K_INT_GLOBAL is set */ + if (new_mask & AR5K_INT_GLOBAL) { + ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + } + + return old_mask; +} + + +/********************\ + Init/Stop functions +\********************/ + +/** + * ath5k_hw_dma_init() - Initialize DMA unit + * @ah: The &struct ath5k_hw + * + * Set DMA size and pre-enable interrupts + * (driver handles tx/rx buffer setup and + * dma start/stop) + * + * XXX: Save/restore RXDP/TXDP registers ? + */ +void +ath5k_hw_dma_init(struct ath5k_hw *ah) +{ + /* + * Set Rx/Tx DMA Configuration + * + * Set standard DMA size (128). Note that + * a DMA size of 512 causes rx overruns and tx errors + * on pci-e cards (tested on 5424 but since rx overruns + * also occur on 5416/5418 with madwifi we set 128 + * for all PCI-E cards to be safe). + * + * XXX: need to check 5210 for this + * TODO: Check out tx trigger level, it's always 64 on dumps but I + * guess we can tweak it and see how it goes ;-) + */ + if (ah->ah_version != AR5K_AR5210) { + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, + AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B); + } + + /* Pre-enable interrupts on 5211/5212*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_set_imr(ah, ah->ah_imr); + +} + +/** + * ath5k_hw_dma_stop() - stop DMA unit + * @ah: The &struct ath5k_hw + * + * Stop tx/rx DMA and interrupts. Returns + * -EBUSY if tx or rx dma failed to stop. + * + * XXX: Sometimes DMA unit hangs and we have + * stuck frames on tx queues, only a reset + * can fix that. + */ +int +ath5k_hw_dma_stop(struct ath5k_hw *ah) +{ + int i, qmax, err; + err = 0; + + /* Disable interrupts */ + ath5k_hw_set_imr(ah, 0); + + /* Stop rx dma */ + err = ath5k_hw_stop_rx_dma(ah); + if (err) + return err; + + /* Clear any pending interrupts + * and disable tx dma */ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); + qmax = AR5K_NUM_TX_QUEUES; + } else { + /* PISR/SISR Not available on 5210 */ + ath5k_hw_reg_read(ah, AR5K_ISR); + qmax = AR5K_NUM_TX_QUEUES_NOQCU; + } + + for (i = 0; i < qmax; i++) { + err = ath5k_hw_stop_tx_dma(ah, i); + /* -EINVAL -> queue inactive */ + if (err && err != -EINVAL) + return err; + } + + return 0; +} diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c new file mode 100644 index 000000000..58d3e86f6 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -0,0 +1,1799 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* EEPROM access functions and helpers * +\*************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/slab.h> + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + + +/******************\ +* Helper functions * +\******************/ + +/* + * Translate binary channel representation in EEPROM to frequency + */ +static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin, + unsigned int mode) +{ + u16 val; + + if (bin == AR5K_EEPROM_CHANNEL_DIS) + return bin; + + if (mode == AR5K_EEPROM_MODE_11A) { + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) + val = (5 * bin) + 4800; + else + val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : + (bin * 10) + 5100; + } else { + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) + val = bin + 2300; + else + val = bin + 2400; + } + + return val; +} + + +/*********\ +* Parsers * +\*********/ + +/* + * Initialize eeprom & capabilities structs + */ +static int +ath5k_eeprom_init_header(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u16 val; + u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX; + + /* + * Read values from EEPROM and store them in the capability structure + */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); + + /* Return if we have an old EEPROM */ + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) + return 0; + + /* + * Validate the checksum of the EEPROM date. There are some + * devices with invalid EEPROMs. + */ + AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val); + if (val) { + eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) << + AR5K_EEPROM_SIZE_ENDLOC_SHIFT; + AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val); + eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE; + + /* + * Fail safe check to prevent stupid loops due + * to busted EEPROMs. XXX: This value is likely too + * big still, waiting on a better value. + */ + if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) { + ATH5K_ERR(ah, "Invalid max custom EEPROM size: " + "%d (0x%04x) max expected: %d (0x%04x)\n", + eep_max, eep_max, + 3 * AR5K_EEPROM_INFO_MAX, + 3 * AR5K_EEPROM_INFO_MAX); + return -EIO; + } + } + + for (cksum = 0, offset = 0; offset < eep_max; offset++) { + AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); + cksum ^= val; + } + if (cksum != AR5K_EEPROM_INFO_CKSUM) { + ATH5K_ERR(ah, "Invalid EEPROM " + "checksum: 0x%04x eep_max: 0x%04x (%s)\n", + cksum, eep_max, + eep_max == AR5K_EEPROM_INFO_MAX ? + "default size" : "custom size"); + return -EIO; + } + + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), + ee_ant_gain); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); + + /* XXX: Don't know which versions include these two */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC2, ee_misc2); + + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC3, ee_misc3); + + if (ee->ee_version >= AR5K_EEPROM_VERSION_5_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC4, ee_misc4); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC5, ee_misc5); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC6, ee_misc6); + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; + + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; + } + + AR5K_EEPROM_READ(AR5K_EEPROM_IS_HB63, val); + + if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && val) + ee->ee_is_hb63 = true; + else + ee->ee_is_hb63 = false; + + AR5K_EEPROM_READ(AR5K_EEPROM_RFKILL, val); + ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL); + ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? true : false; + + /* Check if PCIE_OFFSET points to PCIE_SERDES_SECTION + * and enable serdes programming if needed. + * + * XXX: Serdes values seem to be fixed so + * no need to read them here, we write them + * during ath5k_hw_init */ + AR5K_EEPROM_READ(AR5K_EEPROM_PCIE_OFFSET, val); + ee->ee_serdes = (val == AR5K_EEPROM_PCIE_SERDES_SECTION) ? + true : false; + + return 0; +} + + +/* + * Read antenna infos from eeprom + */ +static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int i = 0; + + AR5K_EEPROM_READ(o++, val); + ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; + ee->ee_atn_tx_rx[mode] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; + ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + /* Get antenna switch tables */ + ah->ah_ant_ctl[mode][AR5K_ANT_CTL] = + (ee->ee_ant_control[mode][0] << 4); + ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] = + ee->ee_ant_control[mode][1] | + (ee->ee_ant_control[mode][2] << 6) | + (ee->ee_ant_control[mode][3] << 12) | + (ee->ee_ant_control[mode][4] << 18) | + (ee->ee_ant_control[mode][5] << 24); + ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] = + ee->ee_ant_control[mode][6] | + (ee->ee_ant_control[mode][7] << 6) | + (ee->ee_ant_control[mode][8] << 12) | + (ee->ee_ant_control[mode][9] << 18) | + (ee->ee_ant_control[mode][10] << 24); + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Read supported modes and some mode-specific calibration data + * from eeprom + */ +static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + + ee->ee_n_piers[mode] = 0; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + switch (mode) { + case AR5K_EEPROM_MODE_11A: + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; + break; + case AR5K_EEPROM_MODE_11G: + case AR5K_EEPROM_MODE_11B: + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + break; + } + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; + ee->ee_thr_62[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; + ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; + + if ((val & 0xff) & 0x80) + ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); + else + ee->ee_noise_floor_thr[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_noise_floor_thr[mode] = + mode == AR5K_EEPROM_MODE_11A ? -54 : -1; + + AR5K_EEPROM_READ(o++, val); + ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; + ee->ee_x_gain[mode] = (val >> 1) & 0xf; + ee->ee_xpd[mode] = val & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && + mode != AR5K_EEPROM_MODE_11B) + ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(o++, val); + ee->ee_false_detect[mode] = (val >> 6) & 0x7f; + + if (mode == AR5K_EEPROM_MODE_11A) + ee->ee_xr_power[mode] = val & 0x3f; + else { + /* b_DB_11[bg] and b_OB_11[bg] */ + ee->ee_ob[mode][0] = val & 0x7; + ee->ee_db[mode][0] = (val >> 3) & 0x7; + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { + ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; + ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; + } else { + ee->ee_i_gain[mode] = (val >> 13) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_gain[mode] |= (val << 3) & 0x38; + + if (mode == AR5K_EEPROM_MODE_11G) { + ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6) + ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; + } + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && + mode == AR5K_EEPROM_MODE_11A) { + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_0) + goto done; + + /* Note: >= v5 have bg freq piers on another location + * so these freq piers are ignored for >= v5 (should be 0xff + * anyway) */ + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1) + break; + + AR5K_EEPROM_READ(o++, val); + ee->ee_margin_tx_rx[mode] = val & 0x3f; + break; + case AR5K_EEPROM_MODE_11B: + AR5K_EEPROM_READ(o++, val); + + ee->ee_pwr_cal_b[0].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + ee->ee_pwr_cal_b[1].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pwr_cal_b[2].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + break; + case AR5K_EEPROM_MODE_11G: + AR5K_EEPROM_READ(o++, val); + + ee->ee_pwr_cal_g[0].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + ee->ee_pwr_cal_g[1].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + AR5K_EEPROM_READ(o++, val); + ee->ee_turbo_max_power[mode] = val & 0x7f; + ee->ee_xr_power[mode] = (val >> 7) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pwr_cal_g[2].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_cal[mode] = (val >> 5) & 0x3f; + ee->ee_q_cal[mode] = val & 0x1f; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { + AR5K_EEPROM_READ(o++, val); + ee->ee_cck_ofdm_gain_delta = val & 0xff; + } + break; + } + + /* + * Read turbo mode information on newer EEPROM versions + */ + if (ee->ee_version < AR5K_EEPROM_VERSION_5_0) + goto done; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f; + + ee->ee_atn_tx_rx_turbo[mode] = (val >> 13) & 0x7; + AR5K_EEPROM_READ(o++, val); + ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x7) << 3; + ee->ee_margin_tx_rx_turbo[mode] = (val >> 3) & 0x3f; + + ee->ee_adc_desired_size_turbo[mode] = (val >> 9) & 0x7f; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7; + ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff; + + if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >= 2) + ee->ee_pd_gain_overlap = (val >> 9) & 0xf; + break; + case AR5K_EEPROM_MODE_11G: + ee->ee_switch_settling_turbo[mode] = (val >> 8) & 0x7f; + + ee->ee_atn_tx_rx_turbo[mode] = (val >> 15) & 0x7; + AR5K_EEPROM_READ(o++, val); + ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x1f) << 1; + ee->ee_margin_tx_rx_turbo[mode] = (val >> 5) & 0x3f; + + ee->ee_adc_desired_size_turbo[mode] = (val >> 11) & 0x7f; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size_turbo[mode] |= (val & 0x7) << 5; + ee->ee_pga_desired_size_turbo[mode] = (val >> 3) & 0xff; + break; + } + +done: + /* return new offset */ + *offset = o; + + return 0; +} + +/* Read mode-specific data (except power calibration data) */ +static int +ath5k_eeprom_init_modes(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 mode_offset[3]; + unsigned int mode; + u32 offset; + int ret; + + /* + * Get values for all modes + */ + mode_offset[AR5K_EEPROM_MODE_11A] = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); + mode_offset[AR5K_EEPROM_MODE_11B] = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); + mode_offset[AR5K_EEPROM_MODE_11G] = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); + + ee->ee_turbo_max_power[AR5K_EEPROM_MODE_11A] = + AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { + offset = mode_offset[mode]; + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + } + + /* override for older eeprom versions for better performance */ + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) { + ee->ee_thr_62[AR5K_EEPROM_MODE_11A] = 15; + ee->ee_thr_62[AR5K_EEPROM_MODE_11B] = 28; + ee->ee_thr_62[AR5K_EEPROM_MODE_11G] = 28; + } + + return 0; +} + +/* Read the frequency piers for each mode (mostly used on newer eeproms with 0xff + * frequency mask) */ +static inline int +ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, + struct ath5k_chan_pcal_info *pc, unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + int o = *offset; + int i = 0; + u8 freq1, freq2; + u16 val; + + ee->ee_n_piers[mode] = 0; + while (i < max) { + AR5K_EEPROM_READ(o++, val); + + freq1 = val & 0xff; + if (!freq1) + break; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq1, mode); + ee->ee_n_piers[mode]++; + + freq2 = (val >> 8) & 0xff; + if (!freq2 || i >= max) + break; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq2, mode); + ee->ee_n_piers[mode]++; + } + + /* return new offset */ + *offset = o; + + return 0; +} + +/* Read frequency piers for 802.11a */ +static int +ath5k_eeprom_init_11a_pcal_freq(struct ath5k_hw *ah, int offset) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal = ee->ee_pwr_cal_a; + int i; + u16 val; + u8 mask; + + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { + ath5k_eeprom_read_freq_list(ah, &offset, + AR5K_EEPROM_N_5GHZ_CHAN, pcal, + AR5K_EEPROM_MODE_11A); + } else { + mask = AR5K_EEPROM_FREQ_M(ah->ah_ee_version); + + AR5K_EEPROM_READ(offset++, val); + pcal[0].freq = (val >> 9) & mask; + pcal[1].freq = (val >> 2) & mask; + pcal[2].freq = (val << 5) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[2].freq |= (val >> 11) & 0x1f; + pcal[3].freq = (val >> 4) & mask; + pcal[4].freq = (val << 3) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[4].freq |= (val >> 13) & 0x7; + pcal[5].freq = (val >> 6) & mask; + pcal[6].freq = (val << 1) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[6].freq |= (val >> 15) & 0x1; + pcal[7].freq = (val >> 8) & mask; + pcal[8].freq = (val >> 1) & mask; + pcal[9].freq = (val << 6) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[9].freq |= (val >> 10) & 0x3f; + + /* Fixed number of piers */ + ee->ee_n_piers[AR5K_EEPROM_MODE_11A] = 10; + + for (i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i++) { + pcal[i].freq = ath5k_eeprom_bin2freq(ee, + pcal[i].freq, AR5K_EEPROM_MODE_11A); + } + } + + return 0; +} + +/* Read frequency piers for 802.11bg on eeprom versions >= 5 and eemap >= 2 */ +static inline int +ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal; + + switch (mode) { + case AR5K_EEPROM_MODE_11B: + pcal = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + pcal = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + ath5k_eeprom_read_freq_list(ah, &offset, + AR5K_EEPROM_N_2GHZ_CHAN_2413, pcal, + mode); + + return 0; +} + + +/* + * Read power calibration for RF5111 chips + * + * For RF5111 we have an XPD -eXternal Power Detector- curve + * for each calibrated channel. Each curve has 0,5dB Power steps + * on x axis and PCDAC steps (offsets) on y axis and looks like an + * exponential function. To recreate the curve we read 11 points + * here and interpolate later. + */ + +/* Used to match PCDAC steps with power values on RF5111 chips + * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC + * steps that match with the power values we read from eeprom. On + * older eeprom versions (< 3.2) these steps are equally spaced at + * 10% of the pcdac curve -until the curve reaches its maximum- + * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) + * these 11 steps are spaced in a different way. This function returns + * the pcdac steps based on eeprom version and curve min/max so that we + * can have pcdac/pwr points. + */ +static inline void +ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) +{ + static const u16 intercepts3[] = { + 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 + }; + static const u16 intercepts3_2[] = { + 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 + }; + const u16 *ip; + int i; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2) + ip = intercepts3_2; + else + ip = intercepts3; + + for (i = 0; i < ARRAY_SIZE(intercepts3); i++) + vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100; +} + +static int +ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *chinfo; + u8 pier, pdg; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + if (!chinfo[pier].pd_curves) + continue; + + for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) { + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[pdg]; + + kfree(pd->pd_step); + kfree(pd->pd_pwr); + } + + kfree(chinfo[pier].pd_curves); + } + + return 0; +} + +/* Convert RF5111 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5111 *pcinfo; + struct ath5k_pdgain_info *pd; + u8 pier, point, idx; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5111_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + goto err_out; + + /* Only one curve for RF5111 + * find out which one and place + * in pd_curves. + * Note: ee_x_gain is reversed here */ + for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) { + + if (!((ee->ee_x_gain[mode] >> idx) & 0x1)) { + pdgain_idx[0] = idx; + break; + } + } + + if (idx == AR5K_EEPROM_N_PD_CURVES) + goto err_out; + + ee->ee_pd_gains[mode] = 1; + + pd = &chinfo[pier].pd_curves[idx]; + + pd->pd_points = AR5K_EEPROM_N_PWR_POINTS_5111; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, + sizeof(u8), GFP_KERNEL); + if (!pd->pd_step) + goto err_out; + + pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, + sizeof(s16), GFP_KERNEL); + if (!pd->pd_pwr) + goto err_out; + + /* Fill raw dataset + * (convert power to 0.25dB units + * for RF5112 compatibility) */ + for (point = 0; point < pd->pd_points; point++) { + + /* Absolute values */ + pd->pd_pwr[point] = 2 * pcinfo->pwr[point]; + + /* Already sorted */ + pd->pd_step[point] = pcinfo->pcdac[point]; + } + + /* Set min/max pwr */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + chinfo[pier].max_pwr = pd->pd_pwr[10]; + + } + + return 0; + +err_out: + ath5k_eeprom_free_pcal_info(ah, mode); + return -ENOMEM; +} + +/* Parse EEPROM data */ +static int +ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal; + int offset, ret; + int i; + u16 val; + + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + + ret = ath5k_eeprom_init_11a_pcal_freq(ah, + offset + AR5K_EEPROM_GROUP1_OFFSET); + if (ret < 0) + return ret; + + offset += AR5K_EEPROM_GROUP2_OFFSET; + pcal = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header) && + !AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + pcal = ee->ee_pwr_cal_b; + offset += AR5K_EEPROM_GROUP3_OFFSET; + + /* fixed piers */ + pcal[0].freq = 2412; + pcal[1].freq = 2447; + pcal[2].freq = 2484; + ee->ee_n_piers[mode] = 3; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + pcal = ee->ee_pwr_cal_g; + offset += AR5K_EEPROM_GROUP4_OFFSET; + + /* fixed piers */ + pcal[0].freq = 2312; + pcal[1].freq = 2412; + pcal[2].freq = 2484; + ee->ee_n_piers[mode] = 3; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + struct ath5k_chan_pcal_info_rf5111 *cdata = + &pcal[i].rf5111_info; + + AR5K_EEPROM_READ(offset++, val); + cdata->pcdac_max = ((val >> 10) & AR5K_EEPROM_PCDAC_M); + cdata->pcdac_min = ((val >> 4) & AR5K_EEPROM_PCDAC_M); + cdata->pwr[0] = ((val << 2) & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[0] |= ((val >> 14) & 0x3); + cdata->pwr[1] = ((val >> 8) & AR5K_EEPROM_POWER_M); + cdata->pwr[2] = ((val >> 2) & AR5K_EEPROM_POWER_M); + cdata->pwr[3] = ((val << 4) & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[3] |= ((val >> 12) & 0xf); + cdata->pwr[4] = ((val >> 6) & AR5K_EEPROM_POWER_M); + cdata->pwr[5] = (val & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[6] = ((val >> 10) & AR5K_EEPROM_POWER_M); + cdata->pwr[7] = ((val >> 4) & AR5K_EEPROM_POWER_M); + cdata->pwr[8] = ((val << 2) & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[8] |= ((val >> 14) & 0x3); + cdata->pwr[9] = ((val >> 8) & AR5K_EEPROM_POWER_M); + cdata->pwr[10] = ((val >> 2) & AR5K_EEPROM_POWER_M); + + ath5k_get_pcdac_intercepts(ah, cdata->pcdac_min, + cdata->pcdac_max, cdata->pcdac); + } + + return ath5k_eeprom_convert_pcal_info_5111(ah, mode, pcal); +} + + +/* + * Read power calibration for RF5112 chips + * + * For RF5112 we have 4 XPD -eXternal Power Detector- curves + * for each calibrated channel on 0, -6, -12 and -18dBm but we only + * use the higher (3) and the lower (0) curves. Each curve has 0.5dB + * power steps on x axis and PCDAC steps on y axis and looks like a + * linear function. To recreate the curve and pass the power values + * on hw, we read 4 points for xpd 0 (lower gain -> max power) + * and 3 points for xpd 3 (higher gain -> lower power) here and + * interpolate later. + * + * Note: Many vendors just use xpd 0 so xpd 3 is zeroed. + */ + +/* Convert RF5112 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5112 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, pdg, point; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5112_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + goto err_out; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* Lowest gain curve (max power) */ + if (pdg == 0) { + /* One more point for better accuracy */ + pd->pd_points = AR5K_EEPROM_N_XPD0_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + goto err_out; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + goto err_out; + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + pd->pd_step[0] = pcinfo->pcdac_x0[0]; + pd->pd_pwr[0] = pcinfo->pwr_x0[0]; + + for (point = 1; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x0[point]; + + /* Deltas */ + pd->pd_step[point] = + pd->pd_step[point - 1] + + pcinfo->pcdac_x0[point]; + } + + /* Set min power for this frequency */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Highest gain curve (min power) */ + } else if (pdg == 1) { + + pd->pd_points = AR5K_EEPROM_N_XPD3_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + goto err_out; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + goto err_out; + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + for (point = 0; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x3[point]; + + /* Fixed points */ + pd->pd_step[point] = + pcinfo->pcdac_x3[point]; + } + + /* Since we have a higher gain curve + * override min power */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + } + } + } + + return 0; + +err_out: + ath5k_eeprom_free_pcal_info(ah, mode); + return -ENOMEM; +} + +/* Parse EEPROM data */ +static int +ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info; + struct ath5k_chan_pcal_info *gen_chan_info; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + u32 offset; + u8 i, c; + u16 val; + u8 pd_gains = 0; + + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from lower (x0) to + * higher (x3) gain */ + for (i = 0; i < AR5K_EEPROM_N_PD_CURVES; i++) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> i) & 0x1) + pdgain_idx[pd_gains++] = i; + } + ee->ee_pd_gains[mode] = pd_gains; + + if (pd_gains == 0 || pd_gains > 2) + return -EINVAL; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + /* + * Read 5GHz EEPROM channels + */ + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + ath5k_eeprom_init_11a_pcal_freq(ah, offset); + + offset += AR5K_EEPROM_GROUP2_OFFSET; + gen_chan_info = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += AR5K_EEPROM_GROUP3_OFFSET; + + /* NB: frequency piers parsed during mode init */ + gen_chan_info = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += AR5K_EEPROM_GROUP4_OFFSET; + else if (AR5K_EEPROM_HDR_11B(ee->ee_header)) + offset += AR5K_EEPROM_GROUP2_OFFSET; + + /* NB: frequency piers parsed during mode init */ + gen_chan_info = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + chan_pcal_info = &gen_chan_info[i].rf5112_info; + + /* Power values in quarter dB + * for the lower xpd gain curve + * (0 dBm -> higher output power) */ + for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) { + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x0[c] = (s8) (val & 0xff); + chan_pcal_info->pwr_x0[++c] = (s8) ((val >> 8) & 0xff); + } + + /* PCDAC steps + * corresponding to the above power + * measurements */ + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pcdac_x0[1] = (val & 0x1f); + chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f); + chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f); + + /* Power values in quarter dB + * for the higher xpd gain curve + * (18 dBm -> lower output power) */ + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x3[0] = (s8) (val & 0xff); + chan_pcal_info->pwr_x3[1] = (s8) ((val >> 8) & 0xff); + + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x3[2] = (val & 0xff); + + /* PCDAC steps + * corresponding to the above power + * measurements (fixed) */ + chan_pcal_info->pcdac_x3[0] = 20; + chan_pcal_info->pcdac_x3[1] = 35; + chan_pcal_info->pcdac_x3[2] = 63; + + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) { + chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0x3f); + + /* Last xpd0 power level is also channel maximum */ + gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3]; + } else { + chan_pcal_info->pcdac_x0[0] = 1; + gen_chan_info[i].max_pwr = (s8) ((val >> 8) & 0xff); + } + + } + + return ath5k_eeprom_convert_pcal_info_5112(ah, mode, gen_chan_info); +} + + +/* + * Read power calibration for RF2413 chips + * + * For RF2413 we have a Power to PDDAC table (Power Detector) + * instead of a PCDAC and 4 pd gain curves for each calibrated channel. + * Each curve has power on x axis in 0.5 db steps and PDDADC steps on y + * axis and looks like an exponential function like the RF5111 curve. + * + * To recreate the curves we read here the points and interpolate + * later. Note that in most cases only 2 (higher and lower) curves are + * used (like RF5112) but vendors have the opportunity to include all + * 4 curves on eeprom. The final curve (higher power) has an extra + * point for better accuracy like RF5112. + */ + +/* For RF2413 power calibration data doesn't start on a fixed location and + * if a mode is not supported, its section is missing -not zeroed-. + * So we need to calculate the starting offset for each section by using + * these two functions */ + +/* Return the size of each section based on the mode and the number of pd + * gains available (maximum 4). */ +static inline unsigned int +ath5k_pdgains_size_2413(struct ath5k_eeprom_info *ee, unsigned int mode) +{ + static const unsigned int pdgains_size[] = { 4, 6, 9, 12 }; + unsigned int sz; + + sz = pdgains_size[ee->ee_pd_gains[mode] - 1]; + sz *= ee->ee_n_piers[mode]; + + return sz; +} + +/* Return the starting offset for a section based on the modes supported + * and each section's size. */ +static unsigned int +ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) +{ + u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4); + + switch (mode) { + case AR5K_EEPROM_MODE_11G: + if (AR5K_EEPROM_HDR_11B(ee->ee_header)) + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11B) + + AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + fallthrough; + case AR5K_EEPROM_MODE_11B: + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11A) + + AR5K_EEPROM_N_5GHZ_CHAN / 2; + fallthrough; + case AR5K_EEPROM_MODE_11A: + break; + default: + break; + } + + return offset; +} + +/* Convert RF2413 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, pdg, point; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf2413_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + goto err_out; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* One more point for the highest power + * curve (lowest gain) */ + if (pdg == ee->ee_pd_gains[mode] - 1) + pd->pd_points = AR5K_EEPROM_N_PD_POINTS; + else + pd->pd_points = AR5K_EEPROM_N_PD_POINTS - 1; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + goto err_out; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + goto err_out; + + /* Fill raw dataset + * convert all pwr levels to + * quarter dB for RF5112 compatibility */ + pd->pd_step[0] = pcinfo->pddac_i[pdg]; + pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg]; + + for (point = 1; point < pd->pd_points; point++) { + + pd->pd_pwr[point] = pd->pd_pwr[point - 1] + + 2 * pcinfo->pwr[pdg][point - 1]; + + pd->pd_step[point] = pd->pd_step[point - 1] + + pcinfo->pddac[pdg][point - 1]; + + } + + /* Highest gain curve -> min power */ + if (pdg == 0) + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Lowest gain curve -> max power */ + if (pdg == ee->ee_pd_gains[mode] - 1) + chinfo[pier].max_pwr = + pd->pd_pwr[pd->pd_points - 1]; + } + } + + return 0; + +err_out: + ath5k_eeprom_free_pcal_info(ah, mode); + return -ENOMEM; +} + +/* Parse EEPROM data */ +static int +ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + struct ath5k_chan_pcal_info *chinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + u32 offset; + int idx, i; + u16 val; + u8 pd_gains = 0; + + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from higher to + * lower gain so we go backwards */ + for (idx = AR5K_EEPROM_N_PD_CURVES - 1; idx >= 0; idx--) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> idx) & 0x1) + pdgain_idx[pd_gains++] = idx; + + } + ee->ee_pd_gains[mode] = pd_gains; + + if (pd_gains == 0) + return -EINVAL; + + offset = ath5k_cal_data_offset_2413(ee, mode); + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11a_pcal_freq(ah, offset); + offset += AR5K_EEPROM_N_5GHZ_CHAN / 2; + chinfo = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11bg_2413(ah, mode, offset); + offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + chinfo = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11bg_2413(ah, mode, offset); + offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + chinfo = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + pcinfo = &chinfo[i].rf2413_info; + + /* + * Read pwr_i, pddac_i and the first + * 2 pd points (pwr, pddac) + */ + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr_i[0] = val & 0x1f; + pcinfo->pddac_i[0] = (val >> 5) & 0x7f; + pcinfo->pwr[0][0] = (val >> 12) & 0xf; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[0][0] = val & 0x3f; + pcinfo->pwr[0][1] = (val >> 6) & 0xf; + pcinfo->pddac[0][1] = (val >> 10) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[0][2] = val & 0xf; + pcinfo->pddac[0][2] = (val >> 4) & 0x3f; + + pcinfo->pwr[0][3] = 0; + pcinfo->pddac[0][3] = 0; + + if (pd_gains > 1) { + /* + * Pd gain 0 is not the last pd gain + * so it only has 2 pd points. + * Continue with pd gain 1. + */ + pcinfo->pwr_i[1] = (val >> 10) & 0x1f; + + pcinfo->pddac_i[1] = (val >> 15) & 0x1; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac_i[1] |= (val & 0x3F) << 1; + + pcinfo->pwr[1][0] = (val >> 6) & 0xf; + pcinfo->pddac[1][0] = (val >> 10) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[1][1] = val & 0xf; + pcinfo->pddac[1][1] = (val >> 4) & 0x3f; + pcinfo->pwr[1][2] = (val >> 10) & 0xf; + + pcinfo->pddac[1][2] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[1][2] |= (val & 0xF) << 2; + + pcinfo->pwr[1][3] = 0; + pcinfo->pddac[1][3] = 0; + } else if (pd_gains == 1) { + /* + * Pd gain 0 is the last one so + * read the extra point. + */ + pcinfo->pwr[0][3] = (val >> 10) & 0xf; + + pcinfo->pddac[0][3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[0][3] |= (val & 0xF) << 2; + } + + /* + * Proceed with the other pd_gains + * as above. + */ + if (pd_gains > 2) { + pcinfo->pwr_i[2] = (val >> 4) & 0x1f; + pcinfo->pddac_i[2] = (val >> 9) & 0x7f; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[2][0] = (val >> 0) & 0xf; + pcinfo->pddac[2][0] = (val >> 4) & 0x3f; + pcinfo->pwr[2][1] = (val >> 10) & 0xf; + + pcinfo->pddac[2][1] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[2][1] |= (val & 0xF) << 2; + + pcinfo->pwr[2][2] = (val >> 4) & 0xf; + pcinfo->pddac[2][2] = (val >> 8) & 0x3f; + + pcinfo->pwr[2][3] = 0; + pcinfo->pddac[2][3] = 0; + } else if (pd_gains == 2) { + pcinfo->pwr[1][3] = (val >> 4) & 0xf; + pcinfo->pddac[1][3] = (val >> 8) & 0x3f; + } + + if (pd_gains > 3) { + pcinfo->pwr_i[3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2; + + pcinfo->pddac_i[3] = (val >> 3) & 0x7f; + pcinfo->pwr[3][0] = (val >> 10) & 0xf; + pcinfo->pddac[3][0] = (val >> 14) & 0x3; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[3][0] |= (val & 0xF) << 2; + pcinfo->pwr[3][1] = (val >> 4) & 0xf; + pcinfo->pddac[3][1] = (val >> 8) & 0x3f; + + pcinfo->pwr[3][2] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2; + + pcinfo->pddac[3][2] = (val >> 2) & 0x3f; + pcinfo->pwr[3][3] = (val >> 8) & 0xf; + + pcinfo->pddac[3][3] = (val >> 12) & 0xF; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4; + } else if (pd_gains == 3) { + pcinfo->pwr[2][3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2; + + pcinfo->pddac[2][3] = (val >> 2) & 0x3f; + } + } + + return ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo); +} + + +/* + * Read per rate target power (this is the maximum tx power + * supported by the card). This info is used when setting + * tx power, no matter the channel. + * + * This also works for v5 EEPROMs. + */ +static int +ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_rate_pcal_info *rate_pcal_info; + u8 *rate_target_pwr_num; + u32 offset; + u16 val; + int i; + + offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1); + rate_target_pwr_num = &ee->ee_rate_target_pwr_num[mode]; + switch (mode) { + case AR5K_EEPROM_MODE_11A: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_a; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN; + break; + case AR5K_EEPROM_MODE_11B: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_b; + ee->ee_rate_target_pwr_num[mode] = 2; /* 3rd is g mode's 1st */ + break; + case AR5K_EEPROM_MODE_11G: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_g; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_2GHZ_CHAN; + break; + default: + return -EINVAL; + } + + /* Different freq mask for older eeproms (<= v3.2) */ + if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2) { + for (i = 0; i < (*rate_target_pwr_num); i++) { + AR5K_EEPROM_READ(offset++, val); + rate_pcal_info[i].freq = + ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode); + + rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f); + rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + + if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || + val == 0) { + (*rate_target_pwr_num) = i; + break; + } + + rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7); + rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f); + rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f); + } + } else { + for (i = 0; i < (*rate_target_pwr_num); i++) { + AR5K_EEPROM_READ(offset++, val); + rate_pcal_info[i].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + + rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f); + rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + + if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || + val == 0) { + (*rate_target_pwr_num) = i; + break; + } + + rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf; + rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f); + rate_pcal_info[i].target_power_54 = (val & 0x3f); + } + } + + return 0; +} + + +/* + * Read per channel calibration info from EEPROM + * + * This info is used to calibrate the baseband power table. Imagine + * that for each channel there is a power curve that's hw specific + * (depends on amplifier etc) and we try to "correct" this curve using + * offsets we pass on to phy chip (baseband -> before amplifier) so that + * it can use accurate power values when setting tx power (takes amplifier's + * performance on each channel into account). + * + * EEPROM provides us with the offsets for some pre-calibrated channels + * and we have to interpolate to create the full table for these channels and + * also the table for any channel. + */ +static int +ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + int (*read_pcal)(struct ath5k_hw *hw, int mode); + int mode; + int err; + + if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) && + (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 1)) + read_pcal = ath5k_eeprom_read_pcal_info_5112; + else if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0) && + (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 2)) + read_pcal = ath5k_eeprom_read_pcal_info_2413; + else + read_pcal = ath5k_eeprom_read_pcal_info_5111; + + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; + mode++) { + err = read_pcal(ah, mode); + if (err) + return err; + + err = ath5k_eeprom_read_target_rate_pwr_info(ah, mode); + if (err < 0) + return err; + } + + return 0; +} + +/* Read conformance test limits used for regulatory control */ +static int +ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_edge_power *rep; + unsigned int fmask, pmask; + unsigned int ctl_mode; + int i, j; + u32 offset; + u16 val; + + pmask = AR5K_EEPROM_POWER_M; + fmask = AR5K_EEPROM_FREQ_M(ee->ee_version); + offset = AR5K_EEPROM_CTL(ee->ee_version); + ee->ee_ctls = AR5K_EEPROM_N_CTLS(ee->ee_version); + for (i = 0; i < ee->ee_ctls; i += 2) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_ctl[i] = (val >> 8) & 0xff; + ee->ee_ctl[i + 1] = val & 0xff; + } + + offset = AR5K_EEPROM_GROUP8_OFFSET; + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) + offset += AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) - + AR5K_EEPROM_GROUP5_OFFSET; + else + offset += AR5K_EEPROM_GROUPS_START(ee->ee_version); + + rep = ee->ee_ctl_pwr; + for (i = 0; i < ee->ee_ctls; i++) { + switch (ee->ee_ctl[i] & AR5K_CTL_MODE_M) { + case AR5K_CTL_11A: + case AR5K_CTL_TURBO: + ctl_mode = AR5K_EEPROM_MODE_11A; + break; + default: + ctl_mode = AR5K_EEPROM_MODE_11G; + break; + } + if (ee->ee_ctl[i] == 0) { + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) + offset += 8; + else + offset += 7; + rep += AR5K_EEPROM_N_EDGES; + continue; + } + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { + for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { + AR5K_EEPROM_READ(offset++, val); + rep[j].freq = (val >> 8) & fmask; + rep[j + 1].freq = val & fmask; + } + for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { + AR5K_EEPROM_READ(offset++, val); + rep[j].edge = (val >> 8) & pmask; + rep[j].flag = (val >> 14) & 1; + rep[j + 1].edge = val & pmask; + rep[j + 1].flag = (val >> 6) & 1; + } + } else { + AR5K_EEPROM_READ(offset++, val); + rep[0].freq = (val >> 9) & fmask; + rep[1].freq = (val >> 2) & fmask; + rep[2].freq = (val << 5) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[2].freq |= (val >> 11) & 0x1f; + rep[3].freq = (val >> 4) & fmask; + rep[4].freq = (val << 3) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[4].freq |= (val >> 13) & 0x7; + rep[5].freq = (val >> 6) & fmask; + rep[6].freq = (val << 1) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[6].freq |= (val >> 15) & 0x1; + rep[7].freq = (val >> 8) & fmask; + + rep[0].edge = (val >> 2) & pmask; + rep[1].edge = (val << 4) & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[1].edge |= (val >> 12) & 0xf; + rep[2].edge = (val >> 6) & pmask; + rep[3].edge = val & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[4].edge = (val >> 10) & pmask; + rep[5].edge = (val >> 4) & pmask; + rep[6].edge = (val << 2) & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[6].edge |= (val >> 14) & 0x3; + rep[7].edge = (val >> 8) & pmask; + } + for (j = 0; j < AR5K_EEPROM_N_EDGES; j++) { + rep[j].freq = ath5k_eeprom_bin2freq(ee, + rep[j].freq, ctl_mode); + } + rep += AR5K_EEPROM_N_EDGES; + } + + return 0; +} + +static int +ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 offset; + u16 val; + int i; + + offset = AR5K_EEPROM_CTL(ee->ee_version) + + AR5K_EEPROM_N_CTLS(ee->ee_version); + + if (ee->ee_version < AR5K_EEPROM_VERSION_5_3) { + /* No spur info for 5GHz */ + ee->ee_spur_chans[0][0] = AR5K_EEPROM_NO_SPUR; + /* 2 channels for 2GHz (2464/2420) */ + ee->ee_spur_chans[0][1] = AR5K_EEPROM_5413_SPUR_CHAN_1; + ee->ee_spur_chans[1][1] = AR5K_EEPROM_5413_SPUR_CHAN_2; + ee->ee_spur_chans[2][1] = AR5K_EEPROM_NO_SPUR; + } else if (ee->ee_version >= AR5K_EEPROM_VERSION_5_3) { + for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) { + AR5K_EEPROM_READ(offset, val); + ee->ee_spur_chans[i][0] = val; + AR5K_EEPROM_READ(offset + AR5K_EEPROM_N_SPUR_CHANS, + val); + ee->ee_spur_chans[i][1] = val; + offset++; + } + } + + return 0; +} + + +/***********************\ +* Init/Detach functions * +\***********************/ + +/* + * Initialize eeprom data structure + */ +int +ath5k_eeprom_init(struct ath5k_hw *ah) +{ + int err; + + err = ath5k_eeprom_init_header(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_init_modes(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_pcal_info(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_ctl_info(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_spur_chans(ah); + if (err < 0) + return err; + + return 0; +} + +void +ath5k_eeprom_detach(struct ath5k_hw *ah) +{ + u8 mode; + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) + ath5k_eeprom_free_pcal_info(ah, mode); +} + +int +ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + switch (channel->hw_value) { + case AR5K_MODE_11A: + return AR5K_EEPROM_MODE_11A; + case AR5K_MODE_11G: + return AR5K_EEPROM_MODE_11G; + case AR5K_MODE_11B: + return AR5K_EEPROM_MODE_11B; + default: + ATH5K_WARN(ah, "channel is not A/B/G!"); + return AR5K_EEPROM_MODE_11A; + } +} diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h new file mode 100644 index 000000000..693296ee9 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -0,0 +1,495 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) + */ +#define AR5K_EEPROM_PCIE_OFFSET 0x02 /* Contains offset to PCI-E infos */ +#define AR5K_EEPROM_PCIE_SERDES_SECTION 0x40 /* PCIE_OFFSET points here when + * SERDES infos are present */ +#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ +#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ + +#define AR5K_EEPROM_IS_HB63 0x000b /* Talon detect */ + +#define AR5K_EEPROM_RFKILL 0x0f +#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c +#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 +#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 +#define AR5K_EEPROM_RFKILL_POLARITY_S 1 + +#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ + +/* FLASH(EEPROM) Defines for AR531X chips */ +#define AR5K_EEPROM_SIZE_LOWER 0x1b /* size info -- lower */ +#define AR5K_EEPROM_SIZE_UPPER 0x1c /* size info -- upper */ +#define AR5K_EEPROM_SIZE_UPPER_MASK 0xfff0 +#define AR5K_EEPROM_SIZE_UPPER_SHIFT 4 +#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT 12 + +#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */ +#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ +#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) +#define AR5K_EEPROM_INFO_CKSUM 0xffff +#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) + +#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ +#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2GHz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ +#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_3 0x4003 /* power calibration changes */ +#define AR5K_EEPROM_VERSION_4_4 0x4004 +#define AR5K_EEPROM_VERSION_4_5 0x4005 +#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ +#define AR5K_EEPROM_VERSION_4_7 0x3007 /* 4007 ? */ +#define AR5K_EEPROM_VERSION_4_9 0x4009 /* EAR futureproofing */ +#define AR5K_EEPROM_VERSION_5_0 0x5000 /* Has 2413 PDADC calibration etc */ +#define AR5K_EEPROM_VERSION_5_1 0x5001 /* Has capability values */ +#define AR5K_EEPROM_VERSION_5_3 0x5003 /* Has spur mitigation tables */ + +#define AR5K_EEPROM_MODE_11A 0 +#define AR5K_EEPROM_MODE_11B 1 +#define AR5K_EEPROM_MODE_11G 2 + +#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ +#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) +#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) +#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2GHz */ +#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for < 2W power consumption */ +#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) /* Device type (1 Cardbus, 2 PCI, 3 MiniPCI, 4 AP) */ +#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5GHz */ + +/* Newer EEPROMs are using a different offset */ +#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ + (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) + +#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) +#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((s8)(((_v) >> 8) & 0xff)) +#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((s8)((_v) & 0xff)) + +/* Misc values available since EEPROM 4.0 */ +#define AR5K_EEPROM_MISC0 AR5K_EEPROM_INFO(4) +#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HDR_XR2_DIS(_v) (((_v) >> 12) & 0x1) +#define AR5K_EEPROM_HDR_XR5_DIS(_v) (((_v) >> 13) & 0x1) +#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) + +#define AR5K_EEPROM_MISC1 AR5K_EEPROM_INFO(5) +#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) /* has 32KHz crystal for sleep mode */ +#define AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(_v) (((_v) >> 15) & 0x1) + +#define AR5K_EEPROM_MISC2 AR5K_EEPROM_INFO(6) +#define AR5K_EEPROM_EEP_FILE_VERSION(_v) (((_v) >> 8) & 0xff) +#define AR5K_EEPROM_EAR_FILE_VERSION(_v) ((_v) & 0xff) + +#define AR5K_EEPROM_MISC3 AR5K_EEPROM_INFO(7) +#define AR5K_EEPROM_ART_BUILD_NUM(_v) (((_v) >> 10) & 0x3f) +#define AR5K_EEPROM_EAR_FILE_ID(_v) ((_v) & 0xff) + +#define AR5K_EEPROM_MISC4 AR5K_EEPROM_INFO(8) +#define AR5K_EEPROM_CAL_DATA_START(_v) (((_v) >> 4) & 0xfff) +#define AR5K_EEPROM_MASK_R0(_v) (((_v) >> 2) & 0x3) /* modes supported by radio 0 (bit 1: G, bit 2: A) */ +#define AR5K_EEPROM_MASK_R1(_v) ((_v) & 0x3) /* modes supported by radio 1 (bit 1: G, bit 2: A) */ + +#define AR5K_EEPROM_MISC5 AR5K_EEPROM_INFO(9) +#define AR5K_EEPROM_COMP_DIS(_v) ((_v) & 0x1) /* disable compression */ +#define AR5K_EEPROM_AES_DIS(_v) (((_v) >> 1) & 0x1) /* disable AES */ +#define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) /* disable fast frames */ +#define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) /* disable bursting */ +#define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) /* max number of QCUs. defaults to 10 */ +#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heavy clipping */ +#define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) /* key cache size. defaults to 128 */ + +#define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10) +#define AR5K_EEPROM_TX_CHAIN_DIS ((_v) & 0x7) /* MIMO chains disabled for TX bitmask */ +#define AR5K_EEPROM_RX_CHAIN_DIS (((_v) >> 3) & 0x7) /* MIMO chains disabled for RX bitmask */ +#define AR5K_EEPROM_FCC_MID_EN (((_v) >> 6) & 0x1) /* 5.47-5.7GHz supported */ +#define AR5K_EEPROM_JAP_U1EVEN_EN (((_v) >> 7) & 0x1) /* Japan UNII1 band (5.15-5.25GHz) on even channels (5180, 5200, 5220, 5240) supported */ +#define AR5K_EEPROM_JAP_U2_EN (((_v) >> 8) & 0x1) /* Japan UNII2 band (5.25-5.35GHz) supported */ +#define AR5K_EEPROM_JAP_MID_EN (((_v) >> 9) & 0x1) /* Japan band from 5.47-5.7GHz supported */ +#define AR5K_EEPROM_JAP_U1ODD_EN (((_v) >> 10) & 0x1) /* Japan UNII2 band (5.15-5.25GHz) on odd channels (5170, 5190, 5210, 5230) supported */ +#define AR5K_EEPROM_JAP_11A_NEW_EN (((_v) >> 11) & 0x1) /* Japan A mode enabled (using even channels) */ + +/* calibration settings */ +#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) +#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) +#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) +#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ +#define AR5K_EEPROM_GROUPS_START(_v) AR5K_EEPROM_OFF(_v, 0x0100, 0x0150) /* Start of Groups */ +#define AR5K_EEPROM_GROUP1_OFFSET 0x0 +#define AR5K_EEPROM_GROUP2_OFFSET 0x5 +#define AR5K_EEPROM_GROUP3_OFFSET 0x37 +#define AR5K_EEPROM_GROUP4_OFFSET 0x46 +#define AR5K_EEPROM_GROUP5_OFFSET 0x55 +#define AR5K_EEPROM_GROUP6_OFFSET 0x65 +#define AR5K_EEPROM_GROUP7_OFFSET 0x69 +#define AR5K_EEPROM_GROUP8_OFFSET 0x6f + +#define AR5K_EEPROM_TARGET_PWR_OFF_11A(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP5_OFFSET, 0x0000) +#define AR5K_EEPROM_TARGET_PWR_OFF_11B(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP6_OFFSET, 0x0010) +#define AR5K_EEPROM_TARGET_PWR_OFF_11G(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP7_OFFSET, 0x0014) + +/* [3.1 - 3.3] */ +#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec +#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed + +#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ +#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ +#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 +#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ +#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 +#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ +#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 +#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ +#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 +#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ +#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 +#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ +#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 +#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ +#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 + +/* Some EEPROM defines */ +#define AR5K_EEPROM_EEP_SCALE 100 +#define AR5K_EEPROM_EEP_DELTA 10 +#define AR5K_EEPROM_N_MODES 3 +#define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 +#define AR5K_EEPROM_N_2GHZ_CHAN 3 +#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 +#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 +#define AR5K_EEPROM_MAX_CHAN 10 +#define AR5K_EEPROM_N_PWR_POINTS_5111 11 +#define AR5K_EEPROM_N_PCDAC 11 +#define AR5K_EEPROM_N_PHASE_CAL 5 +#define AR5K_EEPROM_N_TEST_FREQ 8 +#define AR5K_EEPROM_N_EDGES 8 +#define AR5K_EEPROM_N_INTERCEPTS 11 +#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) +#define AR5K_EEPROM_PCDAC_M 0x3f +#define AR5K_EEPROM_PCDAC_START 1 +#define AR5K_EEPROM_PCDAC_STOP 63 +#define AR5K_EEPROM_PCDAC_STEP 1 +#define AR5K_EEPROM_NON_EDGE_M 0x40 +#define AR5K_EEPROM_CHANNEL_POWER 8 +#define AR5K_EEPROM_N_OBDB 4 +#define AR5K_EEPROM_OBDB_DIS 0xffff +#define AR5K_EEPROM_CHANNEL_DIS 0xff +#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) +#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) +#define AR5K_EEPROM_MAX_CTLS 32 +#define AR5K_EEPROM_N_PD_CURVES 4 +#define AR5K_EEPROM_N_XPD0_POINTS 4 +#define AR5K_EEPROM_N_XPD3_POINTS 3 +#define AR5K_EEPROM_N_PD_GAINS 4 +#define AR5K_EEPROM_N_PD_POINTS 5 +#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 +#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 +#define AR5K_EEPROM_POWER_M 0x3f +#define AR5K_EEPROM_POWER_MIN 0 +#define AR5K_EEPROM_POWER_MAX 3150 +#define AR5K_EEPROM_POWER_STEP 50 +#define AR5K_EEPROM_POWER_TABLE_SIZE 64 +#define AR5K_EEPROM_N_POWER_LOC_11B 4 +#define AR5K_EEPROM_N_POWER_LOC_11G 6 +#define AR5K_EEPROM_I_GAIN 10 +#define AR5K_EEPROM_CCK_OFDM_DELTA 15 +#define AR5K_EEPROM_N_IQ_CAL 2 +/* 5GHz/2GHz */ +enum ath5k_eeprom_freq_bands { + AR5K_EEPROM_BAND_5GHZ = 0, + AR5K_EEPROM_BAND_2GHZ = 1, + AR5K_EEPROM_N_FREQ_BANDS, +}; +/* Spur chans per freq band */ +#define AR5K_EEPROM_N_SPUR_CHANS 5 +/* fbin value for chan 2464 x2 */ +#define AR5K_EEPROM_5413_SPUR_CHAN_1 1640 +/* fbin value for chan 2420 x2 */ +#define AR5K_EEPROM_5413_SPUR_CHAN_2 1200 +#define AR5K_EEPROM_SPUR_CHAN_MASK 0x3FFF +#define AR5K_EEPROM_NO_SPUR 0x8000 +#define AR5K_SPUR_CHAN_WIDTH 87 +#define AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz 3125 +#define AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz 6250 + +#define AR5K_EEPROM_READ(_o, _v) do { \ + if (!ath5k_hw_nvram_read(ah, (_o), &(_v))) \ + return -EIO; \ +} while (0) + +#define AR5K_EEPROM_READ_HDR(_o, _v) \ + AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ + +enum ath5k_ant_table { + AR5K_ANT_CTL = 0, /* Idle switch table settings */ + AR5K_ANT_SWTABLE_A = 1, /* Switch table for antenna A */ + AR5K_ANT_SWTABLE_B = 2, /* Switch table for antenna B */ + AR5K_ANT_MAX, +}; + +enum ath5k_ctl_mode { + AR5K_CTL_11A = 0, + AR5K_CTL_11B = 1, + AR5K_CTL_11G = 2, + AR5K_CTL_TURBO = 3, + AR5K_CTL_TURBOG = 4, + AR5K_CTL_2GHT20 = 5, + AR5K_CTL_5GHT20 = 6, + AR5K_CTL_2GHT40 = 7, + AR5K_CTL_5GHT40 = 8, + AR5K_CTL_MODE_M = 15, +}; + +/* Per channel calibration data, used for power table setup */ +struct ath5k_chan_pcal_info_rf5111 { + /* Power levels in half dBm units + * for one power curve. */ + u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; + /* PCDAC table steps + * for the above values */ + u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111]; + /* Starting PCDAC step */ + u8 pcdac_min; + /* Final PCDAC step */ + u8 pcdac_max; +}; + +struct ath5k_chan_pcal_info_rf5112 { + /* Power levels in quarter dBm units + * for lower (0) and higher (3) + * level curves in 0.25dB units */ + s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS]; + s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS]; + /* PCDAC table steps + * for the above values */ + u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS]; + u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; +}; + +struct ath5k_chan_pcal_info_rf2413 { + /* Starting pwr/pddac values */ + s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; + u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; + /* (pwr,pddac) points + * power levels in 0.5dB units */ + s8 pwr[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; + u8 pddac[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; +}; + +enum ath5k_powertable_type { + AR5K_PWRTABLE_PWR_TO_PCDAC = 0, + AR5K_PWRTABLE_LINEAR_PCDAC = 1, + AR5K_PWRTABLE_PWR_TO_PDADC = 2, +}; + +struct ath5k_pdgain_info { + u8 pd_points; + u8 *pd_step; + /* Power values are in + * 0.25dB units */ + s16 *pd_pwr; +}; + +struct ath5k_chan_pcal_info { + /* Frequency */ + u16 freq; + /* Tx power boundaries */ + s16 max_pwr; + s16 min_pwr; + union { + struct ath5k_chan_pcal_info_rf5111 rf5111_info; + struct ath5k_chan_pcal_info_rf5112 rf5112_info; + struct ath5k_chan_pcal_info_rf2413 rf2413_info; + }; + /* Raw values used by phy code + * Curves are stored in order from lower + * gain to higher gain (max txpower -> min txpower) */ + struct ath5k_pdgain_info *pd_curves; +}; + +/* Per rate calibration data for each mode, + * used for rate power table setup. + * Note: Values in 0.5dB units */ +struct ath5k_rate_pcal_info { + u16 freq; /* Frequency */ + /* Power level for 6-24Mbit/s rates or + * 1Mb rate */ + u16 target_power_6to24; + /* Power level for 36Mbit rate or + * 2Mb rate */ + u16 target_power_36; + /* Power level for 48Mbit rate or + * 5.5Mbit rate */ + u16 target_power_48; + /* Power level for 54Mbit rate or + * 11Mbit rate */ + u16 target_power_54; +}; + +/* Power edges for conformance test limits */ +struct ath5k_edge_power { + u16 freq; + u16 edge; /* in half dBm */ + bool flag; +}; + +/** + * struct ath5k_eeprom_info - EEPROM calibration data + * + * @ee_regdomain: ath/regd.c takes care of COUNTRY_ERD and WORLDWIDE_ROAMING + * flags + * @ee_ant_gain: Antenna gain in 0.5dB steps signed [5211 only?] + * @ee_cck_ofdm_gain_delta: difference in gainF to output the same power for + * OFDM and CCK packets + * @ee_cck_ofdm_power_delta: power difference between OFDM (6Mbps) and CCK + * (11Mbps) rate in G mode. 0.1dB steps + * @ee_scaled_cck_delta: for Japan Channel 14: 0.1dB resolution + * + * @ee_i_cal: Initial I coefficient to correct I/Q mismatch in the receive path + * @ee_q_cal: Initial Q coefficient to correct I/Q mismatch in the receive path + * @ee_fixed_bias: use ee_ob and ee_db settings or use automatic control + * @ee_switch_settling: RX/TX Switch settling time + * @ee_atn_tx_rx: Difference in attenuation between TX and RX in 1dB steps + * @ee_ant_control: Antenna Control Settings + * @ee_ob: Bias current for Output stage of PA + * B/G mode: Index [0] is used for AR2112/5112, otherwise [1] + * A mode: [0] 5.15-5.25 [1] 5.25-5.50 [2] 5.50-5.70 [3] 5.70-5.85 GHz + * @ee_db: Bias current for Output stage of PA. see @ee_ob + * @ee_tx_end2xlna_enable: Time difference from when BB finishes sending a frame + * to when the external LNA is activated + * @ee_tx_end2xpa_disable: Time difference from when BB finishes sending a frame + * to when the external PA switch is deactivated + * @ee_tx_frm2xpa_enable: Time difference from when MAC sends frame to when + * external PA switch is activated + * @ee_thr_62: Clear Channel Assessment (CCA) sensitivity + * (IEEE802.11a section 17.3.10.5 ) + * @ee_xlna_gain: Total gain of the LNA (information only) + * @ee_xpd: Use external (1) or internal power detector + * @ee_x_gain: Gain for external power detector output (differences in EEMAP + * versions!) + * @ee_i_gain: Initial gain value after reset + * @ee_margin_tx_rx: Margin in dB when final attenuation stage should be used + * + * @ee_false_detect: Backoff in Sensitivity (dB) on channels with spur signals + * @ee_noise_floor_thr: Noise floor threshold in 1dB steps + * @ee_adc_desired_size: Desired amplitude for ADC, used by AGC; in 0.5 dB steps + * @ee_pga_desired_size: Desired output of PGA (for BB gain) in 0.5 dB steps + * @ee_pd_gain_overlap: PD ADC curves need to overlap in 0.5dB steps (ee_map>=2) + */ +struct ath5k_eeprom_info { + + /* Header information */ + u16 ee_magic; + u16 ee_protect; + u16 ee_regdomain; + u16 ee_version; + u16 ee_header; + u16 ee_ant_gain; + u8 ee_rfkill_pin; + bool ee_rfkill_pol; + bool ee_is_hb63; + bool ee_serdes; + u16 ee_misc0; + u16 ee_misc1; + u16 ee_misc2; + u16 ee_misc3; + u16 ee_misc4; + u16 ee_misc5; + u16 ee_misc6; + u16 ee_cck_ofdm_gain_delta; + u16 ee_cck_ofdm_power_delta; + u16 ee_scaled_cck_delta; + + /* RF Calibration settings (reset, rfregs) */ + u16 ee_i_cal[AR5K_EEPROM_N_MODES]; + u16 ee_q_cal[AR5K_EEPROM_N_MODES]; + u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; + u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; + u16 ee_xr_power[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; + u16 ee_atn_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; + u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; + u16 ee_thr_62[AR5K_EEPROM_N_MODES]; + u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; + u16 ee_xpd[AR5K_EEPROM_N_MODES]; + u16 ee_x_gain[AR5K_EEPROM_N_MODES]; + u16 ee_i_gain[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling_turbo[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx_turbo[AR5K_EEPROM_N_MODES]; + u16 ee_atn_tx_rx_turbo[AR5K_EEPROM_N_MODES]; + + /* Power calibration data */ + u16 ee_false_detect[AR5K_EEPROM_N_MODES]; + + /* Number of pd gain curves per mode */ + u8 ee_pd_gains[AR5K_EEPROM_N_MODES]; + /* Back mapping pdcurve number -> pdcurve index in pd->pd_curves */ + u8 ee_pdc_to_idx[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PD_GAINS]; + + u8 ee_n_piers[AR5K_EEPROM_N_MODES]; + struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN]; + struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + + /* Per rate target power levels */ + u8 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES]; + struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN]; + struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + + /* Conformance test limits (Unused) */ + u8 ee_ctls; + u8 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS]; + + /* Noise Floor Calibration settings */ + s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size_turbo[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES]; + s8 ee_pd_gain_overlap; + + /* Spur mitigation data (fbin values for spur channels) */ + u16 ee_spur_chans[AR5K_EEPROM_N_SPUR_CHANS][AR5K_EEPROM_N_FREQ_BANDS]; + + /* Antenna raw switch tables */ + u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; +}; diff --git a/drivers/net/wireless/ath/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c new file mode 100644 index 000000000..73d3dd8a3 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/gpio.c @@ -0,0 +1,213 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/****************\ + GPIO Functions +\****************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + + +/** + * DOC: GPIO/LED functions + * + * Here we control the 6 bidirectional GPIO pins provided by the hw. + * We can set a GPIO pin to be an input or an output pin on GPIO control + * register and then read or set its status from GPIO data input/output + * registers. + * + * We also control the two LED pins provided by the hw, LED_0 is our + * "power" LED and LED_1 is our "network activity" LED but many scenarios + * are available from hw. Vendors might also provide LEDs connected to the + * GPIO pins, we handle them through the LED subsystem on led.c + */ + + +/** + * ath5k_hw_set_ledstate() - Set led state + * @ah: The &struct ath5k_hw + * @state: One of AR5K_LED_* + * + * Used to set the LED blinking state. This only + * works for the LED connected to the LED_0, LED_1 pins, + * not the GPIO based. + */ +void +ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) +{ + u32 led; + /*5210 has different led mode handling*/ + u32 led_5210; + + /*Reset led status*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); + + /* + * Some blinking values, define at your wish + */ + switch (state) { + case AR5K_LED_SCAN: + case AR5K_LED_AUTH: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; + led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; + break; + + case AR5K_LED_INIT: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + + case AR5K_LED_ASSOC: + case AR5K_LED_RUN: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; + led_5210 = AR5K_PCICFG_LED_ASSOC; + break; + + default: + led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + } + + /*Write new status to the register*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); +} + +/** + * ath5k_hw_set_gpio_input() - Set GPIO inputs + * @ah: The &struct ath5k_hw + * @gpio: GPIO pin to set as input + */ +int +ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) +{ + if (gpio >= AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); + + return 0; +} + +/** + * ath5k_hw_set_gpio_output() - Set GPIO outputs + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to set as output + */ +int +ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) +{ + if (gpio >= AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); + + return 0; +} + +/** + * ath5k_hw_get_gpio() - Get GPIO state + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to read + */ +u32 +ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) +{ + if (gpio >= AR5K_NUM_GPIO) + return 0xffffffff; + + /* GPIO input magic */ + return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & + 0x1; +} + +/** + * ath5k_hw_set_gpio() - Set GPIO state + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to set + * @val: Value to set (boolean) + */ +int +ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) +{ + u32 data; + + if (gpio >= AR5K_NUM_GPIO) + return -EINVAL; + + /* GPIO output magic */ + data = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + data &= ~(1 << gpio); + data |= (val & 1) << gpio; + + ath5k_hw_reg_write(ah, data, AR5K_GPIODO); + + return 0; +} + +/** + * ath5k_hw_set_gpio_intr() - Initialize the GPIO interrupt (RFKill switch) + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to use + * @interrupt_level: True to generate interrupt on active pin (high) + * + * This function is used to set up the GPIO interrupt for the hw RFKill switch. + * That switch is connected to a GPIO pin and it's number is stored on EEPROM. + * It can either open or close the circuit to indicate that we should disable + * RF/Wireless to save power (we also get that from EEPROM). + */ +void +ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, + u32 interrupt_level) +{ + u32 data; + + if (gpio >= AR5K_NUM_GPIO) + return; + + /* + * Set the GPIO interrupt + */ + data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & + ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | + AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | + (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); + + ath5k_hw_reg_write(ah, interrupt_level ? data : + (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); + + ah->ah_imr |= AR5K_IMR_GPIO; + + /* Enable GPIO interrupts */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); +} + diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c new file mode 100644 index 000000000..ee1c2fa8b --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/initvals.c @@ -0,0 +1,1605 @@ +/* + * Initial register settings functions + * + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + +/** + * struct ath5k_ini - Mode-independent initial register writes + * @ini_register: Register address + * @ini_value: Default value + * @ini_mode: 0 to write 1 to read (and clear) + */ +struct ath5k_ini { + u16 ini_register; + u32 ini_value; + + enum { + AR5K_INI_WRITE = 0, /* Default */ + AR5K_INI_READ = 1, + } ini_mode; +}; + +/** + * struct ath5k_ini_mode - Mode specific initial register values + * @mode_register: Register address + * @mode_value: Set of values for each enum ath5k_driver_mode + */ +struct ath5k_ini_mode { + u16 mode_register; + u32 mode_value[3]; +}; + +/* Initial register settings for AR5210 */ +static const struct ath5k_ini ar5210_ini[] = { + /* PCU and MAC registers */ + { AR5K_NOQCU_TXDP0, 0 }, + { AR5K_NOQCU_TXDP1, 0 }, + { AR5K_RXDP, 0 }, + { AR5K_CR, 0 }, + { AR5K_ISR, 0, AR5K_INI_READ }, + { AR5K_IMR, 0 }, + { AR5K_IER, AR5K_IER_DISABLE }, + { AR5K_BSR, 0, AR5K_INI_READ }, + { AR5K_TXCFG, AR5K_DMASIZE_128B }, + { AR5K_RXCFG, AR5K_DMASIZE_128B }, + { AR5K_CFG, AR5K_INIT_CFG }, + { AR5K_TOPS, 8 }, + { AR5K_RXNOFRM, 8 }, + { AR5K_RPGTO, 0 }, + { AR5K_TXNOFRM, 0 }, + { AR5K_SFR, 0 }, + { AR5K_MIBC, 0 }, + { AR5K_MISC, 0 }, + { AR5K_RX_FILTER_5210, 0 }, + { AR5K_MCAST_FILTER0_5210, 0 }, + { AR5K_MCAST_FILTER1_5210, 0 }, + { AR5K_TX_MASK0, 0 }, + { AR5K_TX_MASK1, 0 }, + { AR5K_CLR_TMASK, 0 }, + { AR5K_TRIG_LVL, AR5K_TUNE_MIN_TX_FIFO_THRES }, + { AR5K_DIAG_SW_5210, 0 }, + { AR5K_RSSI_THR, AR5K_TUNE_RSSI_THRES }, + { AR5K_TSF_L32_5210, 0 }, + { AR5K_TIMER0_5210, 0 }, + { AR5K_TIMER1_5210, 0xffffffff }, + { AR5K_TIMER2_5210, 0xffffffff }, + { AR5K_TIMER3_5210, 1 }, + { AR5K_CFP_DUR_5210, 0 }, + { AR5K_CFP_PERIOD_5210, 0 }, + /* PHY registers */ + { AR5K_PHY(0), 0x00000047 }, + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY(3), 0x09848ea6 }, + { AR5K_PHY(4), 0x3d32e000 }, + { AR5K_PHY(5), 0x0000076b }, + { AR5K_PHY_ACT, AR5K_PHY_ACT_DISABLE }, + { AR5K_PHY(8), 0x02020200 }, + { AR5K_PHY(9), 0x00000e0e }, + { AR5K_PHY(10), 0x0a020201 }, + { AR5K_PHY(11), 0x00036ffc }, + { AR5K_PHY(12), 0x00000000 }, + { AR5K_PHY(13), 0x00000e0e }, + { AR5K_PHY(14), 0x00000007 }, + { AR5K_PHY(15), 0x00020100 }, + { AR5K_PHY(16), 0x89630000 }, + { AR5K_PHY(17), 0x1372169c }, + { AR5K_PHY(18), 0x0018b633 }, + { AR5K_PHY(19), 0x1284613c }, + { AR5K_PHY(20), 0x0de8b8e0 }, + { AR5K_PHY(21), 0x00074859 }, + { AR5K_PHY(22), 0x7e80beba }, + { AR5K_PHY(23), 0x313a665e }, + { AR5K_PHY_AGCCTL, 0x00001d08 }, + { AR5K_PHY(25), 0x0001ce00 }, + { AR5K_PHY(26), 0x409a4190 }, + { AR5K_PHY(28), 0x0000000f }, + { AR5K_PHY(29), 0x00000080 }, + { AR5K_PHY(30), 0x00000004 }, + { AR5K_PHY(31), 0x00000018 }, /* 0x987c */ + { AR5K_PHY(64), 0x00000000 }, /* 0x9900 */ + { AR5K_PHY(65), 0x00000000 }, + { AR5K_PHY(66), 0x00000000 }, + { AR5K_PHY(67), 0x00800000 }, + { AR5K_PHY(68), 0x00000003 }, + /* BB gain table (64bytes) */ + { AR5K_BB_GAIN(0), 0x00000000 }, + { AR5K_BB_GAIN(1), 0x00000020 }, + { AR5K_BB_GAIN(2), 0x00000010 }, + { AR5K_BB_GAIN(3), 0x00000030 }, + { AR5K_BB_GAIN(4), 0x00000008 }, + { AR5K_BB_GAIN(5), 0x00000028 }, + { AR5K_BB_GAIN(6), 0x00000028 }, + { AR5K_BB_GAIN(7), 0x00000004 }, + { AR5K_BB_GAIN(8), 0x00000024 }, + { AR5K_BB_GAIN(9), 0x00000014 }, + { AR5K_BB_GAIN(10), 0x00000034 }, + { AR5K_BB_GAIN(11), 0x0000000c }, + { AR5K_BB_GAIN(12), 0x0000002c }, + { AR5K_BB_GAIN(13), 0x00000002 }, + { AR5K_BB_GAIN(14), 0x00000022 }, + { AR5K_BB_GAIN(15), 0x00000012 }, + { AR5K_BB_GAIN(16), 0x00000032 }, + { AR5K_BB_GAIN(17), 0x0000000a }, + { AR5K_BB_GAIN(18), 0x0000002a }, + { AR5K_BB_GAIN(19), 0x00000001 }, + { AR5K_BB_GAIN(20), 0x00000021 }, + { AR5K_BB_GAIN(21), 0x00000011 }, + { AR5K_BB_GAIN(22), 0x00000031 }, + { AR5K_BB_GAIN(23), 0x00000009 }, + { AR5K_BB_GAIN(24), 0x00000029 }, + { AR5K_BB_GAIN(25), 0x00000005 }, + { AR5K_BB_GAIN(26), 0x00000025 }, + { AR5K_BB_GAIN(27), 0x00000015 }, + { AR5K_BB_GAIN(28), 0x00000035 }, + { AR5K_BB_GAIN(29), 0x0000000d }, + { AR5K_BB_GAIN(30), 0x0000002d }, + { AR5K_BB_GAIN(31), 0x00000003 }, + { AR5K_BB_GAIN(32), 0x00000023 }, + { AR5K_BB_GAIN(33), 0x00000013 }, + { AR5K_BB_GAIN(34), 0x00000033 }, + { AR5K_BB_GAIN(35), 0x0000000b }, + { AR5K_BB_GAIN(36), 0x0000002b }, + { AR5K_BB_GAIN(37), 0x00000007 }, + { AR5K_BB_GAIN(38), 0x00000027 }, + { AR5K_BB_GAIN(39), 0x00000017 }, + { AR5K_BB_GAIN(40), 0x00000037 }, + { AR5K_BB_GAIN(41), 0x0000000f }, + { AR5K_BB_GAIN(42), 0x0000002f }, + { AR5K_BB_GAIN(43), 0x0000002f }, + { AR5K_BB_GAIN(44), 0x0000002f }, + { AR5K_BB_GAIN(45), 0x0000002f }, + { AR5K_BB_GAIN(46), 0x0000002f }, + { AR5K_BB_GAIN(47), 0x0000002f }, + { AR5K_BB_GAIN(48), 0x0000002f }, + { AR5K_BB_GAIN(49), 0x0000002f }, + { AR5K_BB_GAIN(50), 0x0000002f }, + { AR5K_BB_GAIN(51), 0x0000002f }, + { AR5K_BB_GAIN(52), 0x0000002f }, + { AR5K_BB_GAIN(53), 0x0000002f }, + { AR5K_BB_GAIN(54), 0x0000002f }, + { AR5K_BB_GAIN(55), 0x0000002f }, + { AR5K_BB_GAIN(56), 0x0000002f }, + { AR5K_BB_GAIN(57), 0x0000002f }, + { AR5K_BB_GAIN(58), 0x0000002f }, + { AR5K_BB_GAIN(59), 0x0000002f }, + { AR5K_BB_GAIN(60), 0x0000002f }, + { AR5K_BB_GAIN(61), 0x0000002f }, + { AR5K_BB_GAIN(62), 0x0000002f }, + { AR5K_BB_GAIN(63), 0x0000002f }, + /* 5110 RF gain table (64btes) */ + { AR5K_RF_GAIN(0), 0x0000001d }, + { AR5K_RF_GAIN(1), 0x0000005d }, + { AR5K_RF_GAIN(2), 0x0000009d }, + { AR5K_RF_GAIN(3), 0x000000dd }, + { AR5K_RF_GAIN(4), 0x0000011d }, + { AR5K_RF_GAIN(5), 0x00000021 }, + { AR5K_RF_GAIN(6), 0x00000061 }, + { AR5K_RF_GAIN(7), 0x000000a1 }, + { AR5K_RF_GAIN(8), 0x000000e1 }, + { AR5K_RF_GAIN(9), 0x00000031 }, + { AR5K_RF_GAIN(10), 0x00000071 }, + { AR5K_RF_GAIN(11), 0x000000b1 }, + { AR5K_RF_GAIN(12), 0x0000001c }, + { AR5K_RF_GAIN(13), 0x0000005c }, + { AR5K_RF_GAIN(14), 0x00000029 }, + { AR5K_RF_GAIN(15), 0x00000069 }, + { AR5K_RF_GAIN(16), 0x000000a9 }, + { AR5K_RF_GAIN(17), 0x00000020 }, + { AR5K_RF_GAIN(18), 0x00000019 }, + { AR5K_RF_GAIN(19), 0x00000059 }, + { AR5K_RF_GAIN(20), 0x00000099 }, + { AR5K_RF_GAIN(21), 0x00000030 }, + { AR5K_RF_GAIN(22), 0x00000005 }, + { AR5K_RF_GAIN(23), 0x00000025 }, + { AR5K_RF_GAIN(24), 0x00000065 }, + { AR5K_RF_GAIN(25), 0x000000a5 }, + { AR5K_RF_GAIN(26), 0x00000028 }, + { AR5K_RF_GAIN(27), 0x00000068 }, + { AR5K_RF_GAIN(28), 0x0000001f }, + { AR5K_RF_GAIN(29), 0x0000001e }, + { AR5K_RF_GAIN(30), 0x00000018 }, + { AR5K_RF_GAIN(31), 0x00000058 }, + { AR5K_RF_GAIN(32), 0x00000098 }, + { AR5K_RF_GAIN(33), 0x00000003 }, + { AR5K_RF_GAIN(34), 0x00000004 }, + { AR5K_RF_GAIN(35), 0x00000044 }, + { AR5K_RF_GAIN(36), 0x00000084 }, + { AR5K_RF_GAIN(37), 0x00000013 }, + { AR5K_RF_GAIN(38), 0x00000012 }, + { AR5K_RF_GAIN(39), 0x00000052 }, + { AR5K_RF_GAIN(40), 0x00000092 }, + { AR5K_RF_GAIN(41), 0x000000d2 }, + { AR5K_RF_GAIN(42), 0x0000002b }, + { AR5K_RF_GAIN(43), 0x0000002a }, + { AR5K_RF_GAIN(44), 0x0000006a }, + { AR5K_RF_GAIN(45), 0x000000aa }, + { AR5K_RF_GAIN(46), 0x0000001b }, + { AR5K_RF_GAIN(47), 0x0000001a }, + { AR5K_RF_GAIN(48), 0x0000005a }, + { AR5K_RF_GAIN(49), 0x0000009a }, + { AR5K_RF_GAIN(50), 0x000000da }, + { AR5K_RF_GAIN(51), 0x00000006 }, + { AR5K_RF_GAIN(52), 0x00000006 }, + { AR5K_RF_GAIN(53), 0x00000006 }, + { AR5K_RF_GAIN(54), 0x00000006 }, + { AR5K_RF_GAIN(55), 0x00000006 }, + { AR5K_RF_GAIN(56), 0x00000006 }, + { AR5K_RF_GAIN(57), 0x00000006 }, + { AR5K_RF_GAIN(58), 0x00000006 }, + { AR5K_RF_GAIN(59), 0x00000006 }, + { AR5K_RF_GAIN(60), 0x00000006 }, + { AR5K_RF_GAIN(61), 0x00000006 }, + { AR5K_RF_GAIN(62), 0x00000006 }, + { AR5K_RF_GAIN(63), 0x00000006 }, + /* PHY activation */ + { AR5K_PHY(53), 0x00000020 }, + { AR5K_PHY(51), 0x00000004 }, + { AR5K_PHY(50), 0x00060106 }, + { AR5K_PHY(39), 0x0000006d }, + { AR5K_PHY(48), 0x00000000 }, + { AR5K_PHY(52), 0x00000014 }, + { AR5K_PHY_ACT, AR5K_PHY_ACT_ENABLE }, +}; + +/* Initial register settings for AR5211 */ +static const struct ath5k_ini ar5211_ini[] = { + { AR5K_RXDP, 0x00000000 }, + { AR5K_RTSD0, 0x84849c9c }, + { AR5K_RTSD1, 0x7c7c7c7c }, + { AR5K_RXCFG, 0x00000005 }, + { AR5K_MIBC, 0x00000000 }, + { AR5K_TOPS, 0x00000008 }, + { AR5K_RXNOFRM, 0x00000008 }, + { AR5K_TXNOFRM, 0x00000010 }, + { AR5K_RPGTO, 0x00000000 }, + { AR5K_RFCNT, 0x0000001f }, + { AR5K_QUEUE_TXDP(0), 0x00000000 }, + { AR5K_QUEUE_TXDP(1), 0x00000000 }, + { AR5K_QUEUE_TXDP(2), 0x00000000 }, + { AR5K_QUEUE_TXDP(3), 0x00000000 }, + { AR5K_QUEUE_TXDP(4), 0x00000000 }, + { AR5K_QUEUE_TXDP(5), 0x00000000 }, + { AR5K_QUEUE_TXDP(6), 0x00000000 }, + { AR5K_QUEUE_TXDP(7), 0x00000000 }, + { AR5K_QUEUE_TXDP(8), 0x00000000 }, + { AR5K_QUEUE_TXDP(9), 0x00000000 }, + { AR5K_DCU_FP, 0x00000000 }, + { AR5K_STA_ID1, 0x00000000 }, + { AR5K_BSS_ID0, 0x00000000 }, + { AR5K_BSS_ID1, 0x00000000 }, + { AR5K_RSSI_THR, 0x00000000 }, + { AR5K_CFP_PERIOD_5211, 0x00000000 }, + { AR5K_TIMER0_5211, 0x00000030 }, + { AR5K_TIMER1_5211, 0x0007ffff }, + { AR5K_TIMER2_5211, 0x01ffffff }, + { AR5K_TIMER3_5211, 0x00000031 }, + { AR5K_CFP_DUR_5211, 0x00000000 }, + { AR5K_RX_FILTER_5211, 0x00000000 }, + { AR5K_MCAST_FILTER0_5211, 0x00000000 }, + { AR5K_MCAST_FILTER1_5211, 0x00000002 }, + { AR5K_DIAG_SW_5211, 0x00000000 }, + { AR5K_ADDAC_TEST, 0x00000000 }, + { AR5K_DEFAULT_ANTENNA, 0x00000000 }, + /* PHY registers */ + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY(3), 0x2d849093 }, + { AR5K_PHY(4), 0x7d32e000 }, + { AR5K_PHY(5), 0x00000f6b }, + { AR5K_PHY_ACT, 0x00000000 }, + { AR5K_PHY(11), 0x00026ffe }, + { AR5K_PHY(12), 0x00000000 }, + { AR5K_PHY(15), 0x00020100 }, + { AR5K_PHY(16), 0x206a017a }, + { AR5K_PHY(19), 0x1284613c }, + { AR5K_PHY(21), 0x00000859 }, + { AR5K_PHY(26), 0x409a4190 }, /* 0x9868 */ + { AR5K_PHY(27), 0x050cb081 }, + { AR5K_PHY(28), 0x0000000f }, + { AR5K_PHY(29), 0x00000080 }, + { AR5K_PHY(30), 0x0000000c }, + { AR5K_PHY(64), 0x00000000 }, + { AR5K_PHY(65), 0x00000000 }, + { AR5K_PHY(66), 0x00000000 }, + { AR5K_PHY(67), 0x00800000 }, + { AR5K_PHY(68), 0x00000001 }, + { AR5K_PHY(71), 0x0000092a }, + { AR5K_PHY_IQ, 0x00000000 }, + { AR5K_PHY(73), 0x00058a05 }, + { AR5K_PHY(74), 0x00000001 }, + { AR5K_PHY(75), 0x00000000 }, + { AR5K_PHY_PAPD_PROBE, 0x00000000 }, + { AR5K_PHY(77), 0x00000000 }, /* 0x9934 */ + { AR5K_PHY(78), 0x00000000 }, /* 0x9938 */ + { AR5K_PHY(79), 0x0000003f }, /* 0x993c */ + { AR5K_PHY(80), 0x00000004 }, + { AR5K_PHY(82), 0x00000000 }, + { AR5K_PHY(83), 0x00000000 }, + { AR5K_PHY(84), 0x00000000 }, + { AR5K_PHY_RADAR, 0x5d50f14c }, + { AR5K_PHY(86), 0x00000018 }, + { AR5K_PHY(87), 0x004b6a8e }, + /* Initial Power table (32bytes) + * common on all cards/modes. + * Note: Table is rewritten during + * txpower setup later using calibration + * data etc. so next write is non-common */ + { AR5K_PHY_PCDAC_TXPOWER(1), 0x06ff05ff }, + { AR5K_PHY_PCDAC_TXPOWER(2), 0x07ff07ff }, + { AR5K_PHY_PCDAC_TXPOWER(3), 0x08ff08ff }, + { AR5K_PHY_PCDAC_TXPOWER(4), 0x09ff09ff }, + { AR5K_PHY_PCDAC_TXPOWER(5), 0x0aff0aff }, + { AR5K_PHY_PCDAC_TXPOWER(6), 0x0bff0bff }, + { AR5K_PHY_PCDAC_TXPOWER(7), 0x0cff0cff }, + { AR5K_PHY_PCDAC_TXPOWER(8), 0x0dff0dff }, + { AR5K_PHY_PCDAC_TXPOWER(9), 0x0fff0eff }, + { AR5K_PHY_PCDAC_TXPOWER(10), 0x12ff12ff }, + { AR5K_PHY_PCDAC_TXPOWER(11), 0x14ff13ff }, + { AR5K_PHY_PCDAC_TXPOWER(12), 0x16ff15ff }, + { AR5K_PHY_PCDAC_TXPOWER(13), 0x19ff17ff }, + { AR5K_PHY_PCDAC_TXPOWER(14), 0x1bff1aff }, + { AR5K_PHY_PCDAC_TXPOWER(15), 0x1eff1dff }, + { AR5K_PHY_PCDAC_TXPOWER(16), 0x23ff20ff }, + { AR5K_PHY_PCDAC_TXPOWER(17), 0x27ff25ff }, + { AR5K_PHY_PCDAC_TXPOWER(18), 0x2cff29ff }, + { AR5K_PHY_PCDAC_TXPOWER(19), 0x31ff2fff }, + { AR5K_PHY_PCDAC_TXPOWER(20), 0x37ff34ff }, + { AR5K_PHY_PCDAC_TXPOWER(21), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(22), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(23), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(24), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(25), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(26), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(27), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(28), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(29), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(30), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(31), 0x3aff3aff }, + { AR5K_PHY_CCKTXCTL, 0x00000000 }, + { AR5K_PHY(642), 0x503e4646 }, + { AR5K_PHY_GAIN_2GHZ, 0x6480416c }, + { AR5K_PHY(644), 0x0199a003 }, + { AR5K_PHY(645), 0x044cd610 }, + { AR5K_PHY(646), 0x13800040 }, + { AR5K_PHY(647), 0x1be00060 }, + { AR5K_PHY(648), 0x0c53800a }, + { AR5K_PHY(649), 0x0014df3b }, + { AR5K_PHY(650), 0x000001b5 }, + { AR5K_PHY(651), 0x00000020 }, +}; + +/* Initial mode-specific settings for AR5211 + * 5211 supports OFDM-only g (draft g) but we + * need to test it ! */ +static const struct ath5k_ini_mode ar5211_ini_mode[] = { + { AR5K_TXCFG, + /* A B G */ + { 0x00000015, 0x0000001d, 0x00000015 } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(0), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(1), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(2), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(3), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(4), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(5), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(6), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(7), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(8), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(9), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_DCU_GBL_IFS_SLOT, + { 0x00000168, 0x000001b8, 0x00000168 } }, + { AR5K_DCU_GBL_IFS_SIFS, + { 0x00000230, 0x000000b0, 0x00000230 } }, + { AR5K_DCU_GBL_IFS_EIFS, + { 0x00000d98, 0x00001f48, 0x00000d98 } }, + { AR5K_DCU_GBL_IFS_MISC, + { 0x0000a0e0, 0x00005880, 0x0000a0e0 } }, + { AR5K_TIME_OUT, + { 0x04000400, 0x20003000, 0x04000400 } }, + { AR5K_USEC_5211, + { 0x0e8d8fa7, 0x01608f95, 0x0e8d8fa7 } }, + { AR5K_PHY(8), + { 0x02020200, 0x02010200, 0x02020200 } }, + { AR5K_PHY_RF_CTL2, + { 0x00000e0e, 0x00000707, 0x00000e0e } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x05010000, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000007, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_SETTLING, + { 0x1372169c, 0x137216a8, 0x1372169c } }, + { AR5K_PHY_GAIN, + { 0x0018ba67, 0x0018ba69, 0x0018ba69 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7ec00d2e, 0x7e800d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x31375d5e, 0x313a5d5e, 0x31375d5e } }, + { AR5K_PHY_AGCCTL, + { 0x0000bd10, 0x0000bd38, 0x0000bd10 } }, + { AR5K_PHY_NF, + { 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, + { AR5K_PHY_RX_DELAY, + { 0x00002710, 0x0000157c, 0x00002710 } }, + { AR5K_PHY(70), + { 0x00000190, 0x00000084, 0x00000190 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0x6fe01020, 0x6fe00920, 0x6fe01020 } }, + { AR5K_PHY_PCDAC_TXPOWER_BASE, + { 0x05ff14ff, 0x05ff14ff, 0x05ff19ff } }, + { AR5K_RF_BUFFER_CONTROL_4, + { 0x00000010, 0x00000010, 0x00000010 } }, +}; + +/* Initial register settings for AR5212 and newer chips */ +static const struct ath5k_ini ar5212_ini_common_start[] = { + { AR5K_RXDP, 0x00000000 }, + { AR5K_RXCFG, 0x00000005 }, + { AR5K_MIBC, 0x00000000 }, + { AR5K_TOPS, 0x00000008 }, + { AR5K_RXNOFRM, 0x00000008 }, + { AR5K_TXNOFRM, 0x00000010 }, + { AR5K_RPGTO, 0x00000000 }, + { AR5K_RFCNT, 0x0000001f }, + { AR5K_QUEUE_TXDP(0), 0x00000000 }, + { AR5K_QUEUE_TXDP(1), 0x00000000 }, + { AR5K_QUEUE_TXDP(2), 0x00000000 }, + { AR5K_QUEUE_TXDP(3), 0x00000000 }, + { AR5K_QUEUE_TXDP(4), 0x00000000 }, + { AR5K_QUEUE_TXDP(5), 0x00000000 }, + { AR5K_QUEUE_TXDP(6), 0x00000000 }, + { AR5K_QUEUE_TXDP(7), 0x00000000 }, + { AR5K_QUEUE_TXDP(8), 0x00000000 }, + { AR5K_QUEUE_TXDP(9), 0x00000000 }, + { AR5K_DCU_FP, 0x00000000 }, + { AR5K_DCU_TXP, 0x00000000 }, + /* Tx filter table 0 (32 entries) */ + { AR5K_DCU_TX_FILTER_0(0), 0x00000000 }, /* DCU 0 */ + { AR5K_DCU_TX_FILTER_0(1), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(2), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(3), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(4), 0x00000000 }, /* DCU 1 */ + { AR5K_DCU_TX_FILTER_0(5), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(6), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(7), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(8), 0x00000000 }, /* DCU 2 */ + { AR5K_DCU_TX_FILTER_0(9), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(10), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(11), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(12), 0x00000000 }, /* DCU 3 */ + { AR5K_DCU_TX_FILTER_0(13), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(14), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(15), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(16), 0x00000000 }, /* DCU 4 */ + { AR5K_DCU_TX_FILTER_0(17), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(18), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(19), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(20), 0x00000000 }, /* DCU 5 */ + { AR5K_DCU_TX_FILTER_0(21), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(22), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(23), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(24), 0x00000000 }, /* DCU 6 */ + { AR5K_DCU_TX_FILTER_0(25), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(26), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(27), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(28), 0x00000000 }, /* DCU 7 */ + { AR5K_DCU_TX_FILTER_0(29), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(30), 0x00000000 }, + { AR5K_DCU_TX_FILTER_0(31), 0x00000000 }, + /* Tx filter table 1 (16 entries) */ + { AR5K_DCU_TX_FILTER_1(0), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(1), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(2), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(3), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(4), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(5), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(6), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(7), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(8), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(9), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(10), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(11), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(12), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(13), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(14), 0x00000000 }, + { AR5K_DCU_TX_FILTER_1(15), 0x00000000 }, + { AR5K_DCU_TX_FILTER_CLR, 0x00000000 }, + { AR5K_DCU_TX_FILTER_SET, 0x00000000 }, + { AR5K_STA_ID1, 0x00000000 }, + { AR5K_BSS_ID0, 0x00000000 }, + { AR5K_BSS_ID1, 0x00000000 }, + { AR5K_BEACON_5211, 0x00000000 }, + { AR5K_CFP_PERIOD_5211, 0x00000000 }, + { AR5K_TIMER0_5211, 0x00000030 }, + { AR5K_TIMER1_5211, 0x0007ffff }, + { AR5K_TIMER2_5211, 0x01ffffff }, + { AR5K_TIMER3_5211, 0x00000031 }, + { AR5K_CFP_DUR_5211, 0x00000000 }, + { AR5K_RX_FILTER_5211, 0x00000000 }, + { AR5K_DIAG_SW_5211, 0x00000000 }, + { AR5K_ADDAC_TEST, 0x00000000 }, + { AR5K_DEFAULT_ANTENNA, 0x00000000 }, + { AR5K_FRAME_CTL_QOSM, 0x000fc78f }, + { AR5K_XRMODE, 0x2a82301a }, + { AR5K_XRDELAY, 0x05dc01e0 }, + { AR5K_XRTIMEOUT, 0x1f402710 }, + { AR5K_XRCHIRP, 0x01f40000 }, + { AR5K_XRSTOMP, 0x00001e1c }, + { AR5K_SLEEP0, 0x0002aaaa }, + { AR5K_SLEEP1, 0x02005555 }, + { AR5K_SLEEP2, 0x00000000 }, + { AR_BSSMSKL, 0xffffffff }, + { AR_BSSMSKU, 0x0000ffff }, + { AR5K_TXPC, 0x00000000 }, + { AR5K_PROFCNT_TX, 0x00000000 }, + { AR5K_PROFCNT_RX, 0x00000000 }, + { AR5K_PROFCNT_RXCLR, 0x00000000 }, + { AR5K_PROFCNT_CYCLE, 0x00000000 }, + { AR5K_QUIET_CTL1, 0x00000088 }, + /* Initial rate duration table (32 entries )*/ + { AR5K_RATE_DUR(0), 0x00000000 }, + { AR5K_RATE_DUR(1), 0x0000008c }, + { AR5K_RATE_DUR(2), 0x000000e4 }, + { AR5K_RATE_DUR(3), 0x000002d5 }, + { AR5K_RATE_DUR(4), 0x00000000 }, + { AR5K_RATE_DUR(5), 0x00000000 }, + { AR5K_RATE_DUR(6), 0x000000a0 }, + { AR5K_RATE_DUR(7), 0x000001c9 }, + { AR5K_RATE_DUR(8), 0x0000002c }, + { AR5K_RATE_DUR(9), 0x0000002c }, + { AR5K_RATE_DUR(10), 0x00000030 }, + { AR5K_RATE_DUR(11), 0x0000003c }, + { AR5K_RATE_DUR(12), 0x0000002c }, + { AR5K_RATE_DUR(13), 0x0000002c }, + { AR5K_RATE_DUR(14), 0x00000030 }, + { AR5K_RATE_DUR(15), 0x0000003c }, + { AR5K_RATE_DUR(16), 0x00000000 }, + { AR5K_RATE_DUR(17), 0x00000000 }, + { AR5K_RATE_DUR(18), 0x00000000 }, + { AR5K_RATE_DUR(19), 0x00000000 }, + { AR5K_RATE_DUR(20), 0x00000000 }, + { AR5K_RATE_DUR(21), 0x00000000 }, + { AR5K_RATE_DUR(22), 0x00000000 }, + { AR5K_RATE_DUR(23), 0x00000000 }, + { AR5K_RATE_DUR(24), 0x000000d5 }, + { AR5K_RATE_DUR(25), 0x000000df }, + { AR5K_RATE_DUR(26), 0x00000102 }, + { AR5K_RATE_DUR(27), 0x0000013a }, + { AR5K_RATE_DUR(28), 0x00000075 }, + { AR5K_RATE_DUR(29), 0x0000007f }, + { AR5K_RATE_DUR(30), 0x000000a2 }, + { AR5K_RATE_DUR(31), 0x00000000 }, + { AR5K_QUIET_CTL2, 0x00010002 }, + { AR5K_TSF_PARM, 0x00000001 }, + { AR5K_QOS_NOACK, 0x000000c0 }, + { AR5K_PHY_ERR_FIL, 0x00000000 }, + { AR5K_XRLAT_TX, 0x00000168 }, + { AR5K_ACKSIFS, 0x00000000 }, + /* Rate -> db table + * notice ...03<-02<-01<-00 ! */ + { AR5K_RATE2DB(0), 0x03020100 }, + { AR5K_RATE2DB(1), 0x07060504 }, + { AR5K_RATE2DB(2), 0x0b0a0908 }, + { AR5K_RATE2DB(3), 0x0f0e0d0c }, + { AR5K_RATE2DB(4), 0x13121110 }, + { AR5K_RATE2DB(5), 0x17161514 }, + { AR5K_RATE2DB(6), 0x1b1a1918 }, + { AR5K_RATE2DB(7), 0x1f1e1d1c }, + /* Db -> Rate table */ + { AR5K_DB2RATE(0), 0x03020100 }, + { AR5K_DB2RATE(1), 0x07060504 }, + { AR5K_DB2RATE(2), 0x0b0a0908 }, + { AR5K_DB2RATE(3), 0x0f0e0d0c }, + { AR5K_DB2RATE(4), 0x13121110 }, + { AR5K_DB2RATE(5), 0x17161514 }, + { AR5K_DB2RATE(6), 0x1b1a1918 }, + { AR5K_DB2RATE(7), 0x1f1e1d1c }, + /* PHY registers (Common settings + * for all chips/modes) */ + { AR5K_PHY(3), 0xad848e19 }, + { AR5K_PHY(4), 0x7d28e000 }, + { AR5K_PHY_TIMING_3, 0x9c0a9f6b }, + { AR5K_PHY_ACT, 0x00000000 }, + { AR5K_PHY(16), 0x206a017a }, + { AR5K_PHY(21), 0x00000859 }, + { AR5K_PHY_BIN_MASK_1, 0x00000000 }, + { AR5K_PHY_BIN_MASK_2, 0x00000000 }, + { AR5K_PHY_BIN_MASK_3, 0x00000000 }, + { AR5K_PHY_BIN_MASK_CTL, 0x00800000 }, + { AR5K_PHY_ANT_CTL, 0x00000001 }, + /*{ AR5K_PHY(71), 0x0000092a },*/ /* Old value */ + { AR5K_PHY_MAX_RX_LEN, 0x00000c80 }, + { AR5K_PHY_IQ, 0x05100000 }, + { AR5K_PHY_WARM_RESET, 0x00000001 }, + { AR5K_PHY_CTL, 0x00000004 }, + { AR5K_PHY_TXPOWER_RATE1, 0x1e1f2022 }, + { AR5K_PHY_TXPOWER_RATE2, 0x0a0b0c0d }, + { AR5K_PHY_TXPOWER_RATE_MAX, 0x0000003f }, + { AR5K_PHY(82), 0x9280b212 }, + { AR5K_PHY_RADAR, 0x5d50e188 }, + /*{ AR5K_PHY(86), 0x000000ff },*/ + { AR5K_PHY(87), 0x004b6a8e }, + { AR5K_PHY_NFTHRES, 0x000003ce }, + { AR5K_PHY_RESTART, 0x192fb515 }, + { AR5K_PHY(94), 0x00000001 }, + { AR5K_PHY_RFBUS_REQ, 0x00000000 }, + /*{ AR5K_PHY(644), 0x0080a333 },*/ /* Old value */ + /*{ AR5K_PHY(645), 0x00206c10 },*/ /* Old value */ + { AR5K_PHY(644), 0x00806333 }, + { AR5K_PHY(645), 0x00106c10 }, + { AR5K_PHY(646), 0x009c4060 }, + /* { AR5K_PHY(647), 0x1483800a }, */ + /* { AR5K_PHY(648), 0x01831061 }, */ /* Old value */ + { AR5K_PHY(648), 0x018830c6 }, + { AR5K_PHY(649), 0x00000400 }, + /*{ AR5K_PHY(650), 0x000001b5 },*/ + { AR5K_PHY(651), 0x00000000 }, + { AR5K_PHY_TXPOWER_RATE3, 0x20202020 }, + { AR5K_PHY_TXPOWER_RATE4, 0x20202020 }, + /*{ AR5K_PHY(655), 0x13c889af },*/ + { AR5K_PHY(656), 0x38490a20 }, + { AR5K_PHY(657), 0x00007bb6 }, + { AR5K_PHY(658), 0x0fff3ffc }, +}; + +/* Initial mode-specific settings for AR5212 (Written before ar5212_ini) */ +static const struct ath5k_ini_mode ar5212_ini_mode_start[] = { + { AR5K_QUEUE_DFS_LOCAL_IFS(0), + /* A/XR B G */ + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(1), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(2), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(3), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(4), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(5), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(6), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(7), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(8), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(9), + { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_DCU_GBL_IFS_SIFS, + { 0x00000230, 0x000000b0, 0x00000160 } }, + { AR5K_DCU_GBL_IFS_SLOT, + { 0x00000168, 0x000001b8, 0x0000018c } }, + { AR5K_DCU_GBL_IFS_EIFS, + { 0x00000e60, 0x00001f1c, 0x00003e38 } }, + { AR5K_DCU_GBL_IFS_MISC, + { 0x0000a0e0, 0x00005880, 0x0000b0e0 } }, + { AR5K_TIME_OUT, + { 0x03e803e8, 0x04200420, 0x08400840 } }, + { AR5K_PHY(8), + { 0x02020200, 0x02010200, 0x02020200 } }, + { AR5K_PHY_RF_CTL2, + { 0x00000e0e, 0x00000707, 0x00000e0e } }, + { AR5K_PHY_SETTLING, + { 0x1372161c, 0x13721722, 0x137216a2 } }, + { AR5K_PHY_AGCCTL, + { 0x00009d10, 0x00009d18, 0x00009d18 } }, + { AR5K_PHY_NF, + { 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, + { AR5K_PHY_WEAK_OFDM_HIGH_THR, + { 0x409a4190, 0x409a4190, 0x409a4190 } }, + { AR5K_PHY(70), + { 0x000001b8, 0x00000084, 0x00000108 } }, + { AR5K_PHY_OFDM_SELFCORR, + { 0x10058a05, 0x10058a05, 0x10058a05 } }, + { 0xa230, + { 0x00000000, 0x00000000, 0x00000108 } }, +}; + +/* Initial mode-specific settings for AR5212 + RF5111 + * (Written after ar5212_ini) */ +static const struct ath5k_ini_mode rf5111_ini_mode_end[] = { + { AR5K_TXCFG, + /* A/XR B G */ + { 0x00008015, 0x00008015, 0x00008015 } }, + { AR5K_USEC_5211, + { 0x128d8fa7, 0x04e00f95, 0x12e00fab } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x05010100, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000007, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_GAIN, + { 0x0018da5a, 0x0018ca69, 0x0018ca69 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3137665e, 0x3137665e, 0x3137665e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb080 } }, + { AR5K_PHY_RX_DELAY, + { 0x00002710, 0x0000157c, 0x00002af8 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81020, 0xf7b80d20, 0xf7b81020 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x642c416a, 0x6440416a, 0x6440416a } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1873800a, 0x1883800a } }, +}; + +/* Common for all modes */ +static const struct ath5k_ini rf5111_ini_common_end[] = { + { AR5K_DCU_FP, 0x00000000 }, + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY_ADC_CTL, 0x00022ffe }, + { 0x983c, 0x00020100 }, + { AR5K_PHY_GAIN_OFFSET, 0x1284613c }, + { AR5K_PHY_PAPD_PROBE, 0x00004883 }, + { 0x9940, 0x00000004 }, + { 0x9958, 0x000000ff }, + { 0x9974, 0x00000000 }, + { AR5K_PHY_SPENDING, 0x00000018 }, + { AR5K_PHY_CCKTXCTL, 0x00000000 }, + { AR5K_PHY_CCK_CROSSCORR, 0xd03e6788 }, + { AR5K_PHY_DAG_CCK_CTL, 0x000001b5 }, + { 0xa23c, 0x13c889af }, +}; + + +/* Initial mode-specific settings for AR5212 + RF5112 + * (Written after ar5212_ini) */ +static const struct ath5k_ini_mode rf5112_ini_mode_end[] = { + { AR5K_TXCFG, + /* A/XR B G */ + { 0x00008015, 0x00008015, 0x00008015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x04e01395, 0x12e013ab } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x05020100, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000007, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_GAIN, + { 0x0018da6d, 0x0018ca75, 0x0018ca75 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3137665e, 0x3137665e, 0x3137665e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x0000044c, 0x00000898 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81020, 0xf7b80d10, 0xf7b81010 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000008, 0x00000008 } }, + { AR5K_PHY_CCK_CROSSCORR, + { 0xd6be6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x642c0140, 0x6442c160, 0x6442c160 } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1873800a, 0x1883800a } }, +}; + +static const struct ath5k_ini rf5112_ini_common_end[] = { + { AR5K_DCU_FP, 0x00000000 }, + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY_ADC_CTL, 0x00022ffe }, + { 0x983c, 0x00020100 }, + { AR5K_PHY_GAIN_OFFSET, 0x1284613c }, + { AR5K_PHY_PAPD_PROBE, 0x00004882 }, + { 0x9940, 0x00000004 }, + { 0x9958, 0x000000ff }, + { 0x9974, 0x00000000 }, + { AR5K_PHY_DAG_CCK_CTL, 0x000001b5 }, + { 0xa23c, 0x13c889af }, +}; + + +/* Initial mode-specific settings for RF5413/5414 + * (Written after ar5212_ini) */ +static const struct ath5k_ini_mode rf5413_ini_mode_end[] = { + { AR5K_TXCFG, + /* A/XR B G */ + { 0x00000015, 0x00000015, 0x00000015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x04e01395, 0x12e013ab } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x05020100, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000007, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_GAIN, + { 0x0018fa61, 0x001a1a63, 0x001a1a63 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da } }, + { AR5K_PHY_SIG, + { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3139605e, 0x3139605e, 0x3139605e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x0000044c, 0x00000898 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_CCK_CROSSCORR, + { 0xd6be6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x002ec1e0, 0x002ac120, 0x002ac120 } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1863800a, 0x1883800a } }, + { 0xa300, + { 0x18010000, 0x18010000, 0x18010000 } }, + { 0xa304, + { 0x30032602, 0x30032602, 0x30032602 } }, + { 0xa308, + { 0x48073e06, 0x48073e06, 0x48073e06 } }, + { 0xa30c, + { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } }, + { 0xa310, + { 0x641a600f, 0x641a600f, 0x641a600f } }, + { 0xa314, + { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } }, + { 0xa318, + { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } }, + { 0xa31c, + { 0x90cf865b, 0x8ecf865b, 0x8ecf865b } }, + { 0xa320, + { 0x9d4f970f, 0x9b4f970f, 0x9b4f970f } }, + { 0xa324, + { 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f } }, + { 0xa328, + { 0xb55faf1f, 0xb35faf1f, 0xb35faf1f } }, + { 0xa32c, + { 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f } }, + { 0xa330, + { 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f } }, + { 0xa334, + { 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } }, +}; + +static const struct ath5k_ini rf5413_ini_common_end[] = { + { AR5K_DCU_FP, 0x000003e0 }, + { AR5K_5414_CBCFG, 0x00000010 }, + { AR5K_SEQ_MASK, 0x0000000f }, + { 0x809c, 0x00000000 }, + { 0x80a0, 0x00000000 }, + { AR5K_MIC_QOS_CTL, 0x00000000 }, + { AR5K_MIC_QOS_SEL, 0x00000000 }, + { AR5K_MISC_MODE, 0x00000000 }, + { AR5K_OFDM_FIL_CNT, 0x00000000 }, + { AR5K_CCK_FIL_CNT, 0x00000000 }, + { AR5K_PHYERR_CNT1, 0x00000000 }, + { AR5K_PHYERR_CNT1_MASK, 0x00000000 }, + { AR5K_PHYERR_CNT2, 0x00000000 }, + { AR5K_PHYERR_CNT2_MASK, 0x00000000 }, + { AR5K_TSF_THRES, 0x00000000 }, + { 0x8140, 0x800003f9 }, + { 0x8144, 0x00000000 }, + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY_ADC_CTL, 0x0000a000 }, + { 0x983c, 0x00200400 }, + { AR5K_PHY_GAIN_OFFSET, 0x1284233c }, + { AR5K_PHY_SCR, 0x0000001f }, + { AR5K_PHY_SLMT, 0x00000080 }, + { AR5K_PHY_SCAL, 0x0000000e }, + { 0x9958, 0x00081fff }, + { AR5K_PHY_TIMING_7, 0x00000000 }, + { AR5K_PHY_TIMING_8, 0x02800000 }, + { AR5K_PHY_TIMING_11, 0x00000000 }, + { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000 }, + { 0x99e4, 0xaaaaaaaa }, + { 0x99e8, 0x3c466478 }, + { 0x99ec, 0x000000aa }, + { AR5K_PHY_SCLOCK, 0x0000000c }, + { AR5K_PHY_SDELAY, 0x000000ff }, + { AR5K_PHY_SPENDING, 0x00000014 }, + { AR5K_PHY_DAG_CCK_CTL, 0x000009b5 }, + { 0xa23c, 0x93c889af }, + { AR5K_PHY_FAST_ADC, 0x00000001 }, + { 0xa250, 0x0000a000 }, + { AR5K_PHY_BLUETOOTH, 0x00000000 }, + { AR5K_PHY_TPC_RG1, 0x0cc75380 }, + { 0xa25c, 0x0f0f0f01 }, + { 0xa260, 0x5f690f01 }, + { 0xa264, 0x00418a11 }, + { 0xa268, 0x00000000 }, + { AR5K_PHY_TPC_RG5, 0x0c30c16a }, + { 0xa270, 0x00820820 }, + { 0xa274, 0x081b7caa }, + { 0xa278, 0x1ce739ce }, + { 0xa27c, 0x051701ce }, + { 0xa338, 0x00000000 }, + { 0xa33c, 0x00000000 }, + { 0xa340, 0x00000000 }, + { 0xa344, 0x00000000 }, + { 0xa348, 0x3fffffff }, + { 0xa34c, 0x3fffffff }, + { 0xa350, 0x3fffffff }, + { 0xa354, 0x0003ffff }, + { 0xa358, 0x79a8aa1f }, + { 0xa35c, 0x066c420f }, + { 0xa360, 0x0f282207 }, + { 0xa364, 0x17601685 }, + { 0xa368, 0x1f801104 }, + { 0xa36c, 0x37a00c03 }, + { 0xa370, 0x3fc40883 }, + { 0xa374, 0x57c00803 }, + { 0xa378, 0x5fd80682 }, + { 0xa37c, 0x7fe00482 }, + { 0xa380, 0x7f3c7bba }, + { 0xa384, 0xf3307ff0 }, +}; + +/* Initial mode-specific settings for RF2413/2414 + * (Written after ar5212_ini) */ +/* XXX: a mode ? */ +static const struct ath5k_ini_mode rf2413_ini_mode_end[] = { + { AR5K_TXCFG, + /* A/XR B G */ + { 0x00000015, 0x00000015, 0x00000015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x04e01395, 0x12e013ab } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x05020000, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e00, 0x00000e00, 0x00000e00 } }, + { AR5K_PHY_PA_CTL, + { 0x00000002, 0x0000000a, 0x0000000a } }, + { AR5K_PHY_GAIN, + { 0x0018da6d, 0x001a6a64, 0x001a6a64 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0de8b4e0, 0x0de8b0da, 0x0c98b0da } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7ee80d2e, 0x7ec80d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3137665e, 0x3137665e, 0x3139605e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x0000044c, 0x00000898 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_CCK_CROSSCORR, + { 0xd6be6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x002c0140, 0x0042c140, 0x0042c140 } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1863800a, 0x1883800a } }, +}; + +static const struct ath5k_ini rf2413_ini_common_end[] = { + { AR5K_DCU_FP, 0x000003e0 }, + { AR5K_SEQ_MASK, 0x0000000f }, + { AR5K_MIC_QOS_CTL, 0x00000000 }, + { AR5K_MIC_QOS_SEL, 0x00000000 }, + { AR5K_MISC_MODE, 0x00000000 }, + { AR5K_OFDM_FIL_CNT, 0x00000000 }, + { AR5K_CCK_FIL_CNT, 0x00000000 }, + { AR5K_PHYERR_CNT1, 0x00000000 }, + { AR5K_PHYERR_CNT1_MASK, 0x00000000 }, + { AR5K_PHYERR_CNT2, 0x00000000 }, + { AR5K_PHYERR_CNT2_MASK, 0x00000000 }, + { AR5K_TSF_THRES, 0x00000000 }, + { 0x8140, 0x800000a8 }, + { 0x8144, 0x00000000 }, + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY_ADC_CTL, 0x0000a000 }, + { 0x983c, 0x00200400 }, + { AR5K_PHY_GAIN_OFFSET, 0x1284233c }, + { AR5K_PHY_SCR, 0x0000001f }, + { AR5K_PHY_SLMT, 0x00000080 }, + { AR5K_PHY_SCAL, 0x0000000e }, + { 0x9958, 0x000000ff }, + { AR5K_PHY_TIMING_7, 0x00000000 }, + { AR5K_PHY_TIMING_8, 0x02800000 }, + { AR5K_PHY_TIMING_11, 0x00000000 }, + { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000 }, + { 0x99e4, 0xaaaaaaaa }, + { 0x99e8, 0x3c466478 }, + { 0x99ec, 0x000000aa }, + { AR5K_PHY_SCLOCK, 0x0000000c }, + { AR5K_PHY_SDELAY, 0x000000ff }, + { AR5K_PHY_SPENDING, 0x00000014 }, + { AR5K_PHY_DAG_CCK_CTL, 0x000009b5 }, + { 0xa23c, 0x93c889af }, + { AR5K_PHY_FAST_ADC, 0x00000001 }, + { 0xa250, 0x0000a000 }, + { AR5K_PHY_BLUETOOTH, 0x00000000 }, + { AR5K_PHY_TPC_RG1, 0x0cc75380 }, + { 0xa25c, 0x0f0f0f01 }, + { 0xa260, 0x5f690f01 }, + { 0xa264, 0x00418a11 }, + { 0xa268, 0x00000000 }, + { AR5K_PHY_TPC_RG5, 0x0c30c16a }, + { 0xa270, 0x00820820 }, + { 0xa274, 0x001b7caa }, + { 0xa278, 0x1ce739ce }, + { 0xa27c, 0x051701ce }, + { 0xa300, 0x18010000 }, + { 0xa304, 0x30032602 }, + { 0xa308, 0x48073e06 }, + { 0xa30c, 0x560b4c0a }, + { 0xa310, 0x641a600f }, + { 0xa314, 0x784f6e1b }, + { 0xa318, 0x868f7c5a }, + { 0xa31c, 0x8ecf865b }, + { 0xa320, 0x9d4f970f }, + { 0xa324, 0xa5cfa18f }, + { 0xa328, 0xb55faf1f }, + { 0xa32c, 0xbddfb99f }, + { 0xa330, 0xcd7fc73f }, + { 0xa334, 0xd5ffd1bf }, + { 0xa338, 0x00000000 }, + { 0xa33c, 0x00000000 }, + { 0xa340, 0x00000000 }, + { 0xa344, 0x00000000 }, + { 0xa348, 0x3fffffff }, + { 0xa34c, 0x3fffffff }, + { 0xa350, 0x3fffffff }, + { 0xa354, 0x0003ffff }, + { 0xa358, 0x79a8aa1f }, + { 0xa35c, 0x066c420f }, + { 0xa360, 0x0f282207 }, + { 0xa364, 0x17601685 }, + { 0xa368, 0x1f801104 }, + { 0xa36c, 0x37a00c03 }, + { 0xa370, 0x3fc40883 }, + { 0xa374, 0x57c00803 }, + { 0xa378, 0x5fd80682 }, + { 0xa37c, 0x7fe00482 }, + { 0xa380, 0x7f3c7bba }, + { 0xa384, 0xf3307ff0 }, +}; + +/* Initial mode-specific settings for RF2425 + * (Written after ar5212_ini) */ +/* XXX: a mode ? */ +static const struct ath5k_ini_mode rf2425_ini_mode_end[] = { + { AR5K_TXCFG, + /* A/XR B G */ + { 0x00000015, 0x00000015, 0x00000015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x04e01395, 0x12e013ab } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x05020100, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000003, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_SETTLING, + { 0x1372161c, 0x13721722, 0x13721422 } }, + { AR5K_PHY_GAIN, + { 0x0018fa61, 0x00199a65, 0x00199a65 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da } }, + { AR5K_PHY_SIG, + { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3139605e, 0x3139605e, 0x3139605e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x0000044c, 0x00000898 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_CCK_CROSSCORR, + { 0xd6be6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x00000140, 0x0052c140, 0x0052c140 } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1863800a, 0x1883800a } }, + { 0xa324, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa328, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa32c, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa330, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa334, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, +}; + +static const struct ath5k_ini rf2425_ini_common_end[] = { + { AR5K_DCU_FP, 0x000003e0 }, + { AR5K_SEQ_MASK, 0x0000000f }, + { 0x809c, 0x00000000 }, + { 0x80a0, 0x00000000 }, + { AR5K_MIC_QOS_CTL, 0x00000000 }, + { AR5K_MIC_QOS_SEL, 0x00000000 }, + { AR5K_MISC_MODE, 0x00000000 }, + { AR5K_OFDM_FIL_CNT, 0x00000000 }, + { AR5K_CCK_FIL_CNT, 0x00000000 }, + { AR5K_PHYERR_CNT1, 0x00000000 }, + { AR5K_PHYERR_CNT1_MASK, 0x00000000 }, + { AR5K_PHYERR_CNT2, 0x00000000 }, + { AR5K_PHYERR_CNT2_MASK, 0x00000000 }, + { AR5K_TSF_THRES, 0x00000000 }, + { 0x8140, 0x800003f9 }, + { 0x8144, 0x00000000 }, + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY_ADC_CTL, 0x0000a000 }, + { 0x983c, 0x00200400 }, + { AR5K_PHY_GAIN_OFFSET, 0x1284233c }, + { AR5K_PHY_SCR, 0x0000001f }, + { AR5K_PHY_SLMT, 0x00000080 }, + { AR5K_PHY_SCAL, 0x0000000e }, + { 0x9958, 0x00081fff }, + { AR5K_PHY_TIMING_7, 0x00000000 }, + { AR5K_PHY_TIMING_8, 0x02800000 }, + { AR5K_PHY_TIMING_11, 0x00000000 }, + { 0x99dc, 0xfebadbe8 }, + { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000 }, + { 0x99e4, 0xaaaaaaaa }, + { 0x99e8, 0x3c466478 }, + { 0x99ec, 0x000000aa }, + { AR5K_PHY_SCLOCK, 0x0000000c }, + { AR5K_PHY_SDELAY, 0x000000ff }, + { AR5K_PHY_SPENDING, 0x00000014 }, + { AR5K_PHY_DAG_CCK_CTL, 0x000009b5 }, + { AR5K_PHY_TXPOWER_RATE3, 0x20202020 }, + { AR5K_PHY_TXPOWER_RATE4, 0x20202020 }, + { 0xa23c, 0x93c889af }, + { AR5K_PHY_FAST_ADC, 0x00000001 }, + { 0xa250, 0x0000a000 }, + { AR5K_PHY_BLUETOOTH, 0x00000000 }, + { AR5K_PHY_TPC_RG1, 0x0cc75380 }, + { 0xa25c, 0x0f0f0f01 }, + { 0xa260, 0x5f690f01 }, + { 0xa264, 0x00418a11 }, + { 0xa268, 0x00000000 }, + { AR5K_PHY_TPC_RG5, 0x0c30c166 }, + { 0xa270, 0x00820820 }, + { 0xa274, 0x081a3caa }, + { 0xa278, 0x1ce739ce }, + { 0xa27c, 0x051701ce }, + { 0xa300, 0x16010000 }, + { 0xa304, 0x2c032402 }, + { 0xa308, 0x48433e42 }, + { 0xa30c, 0x5a0f500b }, + { 0xa310, 0x6c4b624a }, + { 0xa314, 0x7e8b748a }, + { 0xa318, 0x96cf8ccb }, + { 0xa31c, 0xa34f9d0f }, + { 0xa320, 0xa7cfa58f }, + { 0xa348, 0x3fffffff }, + { 0xa34c, 0x3fffffff }, + { 0xa350, 0x3fffffff }, + { 0xa354, 0x0003ffff }, + { 0xa358, 0x79a8aa1f }, + { 0xa35c, 0x066c420f }, + { 0xa360, 0x0f282207 }, + { 0xa364, 0x17601685 }, + { 0xa368, 0x1f801104 }, + { 0xa36c, 0x37a00c03 }, + { 0xa370, 0x3fc40883 }, + { 0xa374, 0x57c00803 }, + { 0xa378, 0x5fd80682 }, + { 0xa37c, 0x7fe00482 }, + { 0xa380, 0x7f3c7bba }, + { 0xa384, 0xf3307ff0 }, +}; + +/* + * Initial BaseBand Gain settings for RF5111/5112 (AR5210 comes with + * RF5110 only so initial BB Gain settings are included in AR5K_AR5210_INI) + */ + +/* RF5111 Initial BaseBand Gain settings */ +static const struct ath5k_ini rf5111_ini_bbgain[] = { + { AR5K_BB_GAIN(0), 0x00000000 }, + { AR5K_BB_GAIN(1), 0x00000020 }, + { AR5K_BB_GAIN(2), 0x00000010 }, + { AR5K_BB_GAIN(3), 0x00000030 }, + { AR5K_BB_GAIN(4), 0x00000008 }, + { AR5K_BB_GAIN(5), 0x00000028 }, + { AR5K_BB_GAIN(6), 0x00000004 }, + { AR5K_BB_GAIN(7), 0x00000024 }, + { AR5K_BB_GAIN(8), 0x00000014 }, + { AR5K_BB_GAIN(9), 0x00000034 }, + { AR5K_BB_GAIN(10), 0x0000000c }, + { AR5K_BB_GAIN(11), 0x0000002c }, + { AR5K_BB_GAIN(12), 0x00000002 }, + { AR5K_BB_GAIN(13), 0x00000022 }, + { AR5K_BB_GAIN(14), 0x00000012 }, + { AR5K_BB_GAIN(15), 0x00000032 }, + { AR5K_BB_GAIN(16), 0x0000000a }, + { AR5K_BB_GAIN(17), 0x0000002a }, + { AR5K_BB_GAIN(18), 0x00000006 }, + { AR5K_BB_GAIN(19), 0x00000026 }, + { AR5K_BB_GAIN(20), 0x00000016 }, + { AR5K_BB_GAIN(21), 0x00000036 }, + { AR5K_BB_GAIN(22), 0x0000000e }, + { AR5K_BB_GAIN(23), 0x0000002e }, + { AR5K_BB_GAIN(24), 0x00000001 }, + { AR5K_BB_GAIN(25), 0x00000021 }, + { AR5K_BB_GAIN(26), 0x00000011 }, + { AR5K_BB_GAIN(27), 0x00000031 }, + { AR5K_BB_GAIN(28), 0x00000009 }, + { AR5K_BB_GAIN(29), 0x00000029 }, + { AR5K_BB_GAIN(30), 0x00000005 }, + { AR5K_BB_GAIN(31), 0x00000025 }, + { AR5K_BB_GAIN(32), 0x00000015 }, + { AR5K_BB_GAIN(33), 0x00000035 }, + { AR5K_BB_GAIN(34), 0x0000000d }, + { AR5K_BB_GAIN(35), 0x0000002d }, + { AR5K_BB_GAIN(36), 0x00000003 }, + { AR5K_BB_GAIN(37), 0x00000023 }, + { AR5K_BB_GAIN(38), 0x00000013 }, + { AR5K_BB_GAIN(39), 0x00000033 }, + { AR5K_BB_GAIN(40), 0x0000000b }, + { AR5K_BB_GAIN(41), 0x0000002b }, + { AR5K_BB_GAIN(42), 0x0000002b }, + { AR5K_BB_GAIN(43), 0x0000002b }, + { AR5K_BB_GAIN(44), 0x0000002b }, + { AR5K_BB_GAIN(45), 0x0000002b }, + { AR5K_BB_GAIN(46), 0x0000002b }, + { AR5K_BB_GAIN(47), 0x0000002b }, + { AR5K_BB_GAIN(48), 0x0000002b }, + { AR5K_BB_GAIN(49), 0x0000002b }, + { AR5K_BB_GAIN(50), 0x0000002b }, + { AR5K_BB_GAIN(51), 0x0000002b }, + { AR5K_BB_GAIN(52), 0x0000002b }, + { AR5K_BB_GAIN(53), 0x0000002b }, + { AR5K_BB_GAIN(54), 0x0000002b }, + { AR5K_BB_GAIN(55), 0x0000002b }, + { AR5K_BB_GAIN(56), 0x0000002b }, + { AR5K_BB_GAIN(57), 0x0000002b }, + { AR5K_BB_GAIN(58), 0x0000002b }, + { AR5K_BB_GAIN(59), 0x0000002b }, + { AR5K_BB_GAIN(60), 0x0000002b }, + { AR5K_BB_GAIN(61), 0x0000002b }, + { AR5K_BB_GAIN(62), 0x00000002 }, + { AR5K_BB_GAIN(63), 0x00000016 }, +}; + +/* RF5112 Initial BaseBand Gain settings (Same for RF5413/5414+) */ +static const struct ath5k_ini rf5112_ini_bbgain[] = { + { AR5K_BB_GAIN(0), 0x00000000 }, + { AR5K_BB_GAIN(1), 0x00000001 }, + { AR5K_BB_GAIN(2), 0x00000002 }, + { AR5K_BB_GAIN(3), 0x00000003 }, + { AR5K_BB_GAIN(4), 0x00000004 }, + { AR5K_BB_GAIN(5), 0x00000005 }, + { AR5K_BB_GAIN(6), 0x00000008 }, + { AR5K_BB_GAIN(7), 0x00000009 }, + { AR5K_BB_GAIN(8), 0x0000000a }, + { AR5K_BB_GAIN(9), 0x0000000b }, + { AR5K_BB_GAIN(10), 0x0000000c }, + { AR5K_BB_GAIN(11), 0x0000000d }, + { AR5K_BB_GAIN(12), 0x00000010 }, + { AR5K_BB_GAIN(13), 0x00000011 }, + { AR5K_BB_GAIN(14), 0x00000012 }, + { AR5K_BB_GAIN(15), 0x00000013 }, + { AR5K_BB_GAIN(16), 0x00000014 }, + { AR5K_BB_GAIN(17), 0x00000015 }, + { AR5K_BB_GAIN(18), 0x00000018 }, + { AR5K_BB_GAIN(19), 0x00000019 }, + { AR5K_BB_GAIN(20), 0x0000001a }, + { AR5K_BB_GAIN(21), 0x0000001b }, + { AR5K_BB_GAIN(22), 0x0000001c }, + { AR5K_BB_GAIN(23), 0x0000001d }, + { AR5K_BB_GAIN(24), 0x00000020 }, + { AR5K_BB_GAIN(25), 0x00000021 }, + { AR5K_BB_GAIN(26), 0x00000022 }, + { AR5K_BB_GAIN(27), 0x00000023 }, + { AR5K_BB_GAIN(28), 0x00000024 }, + { AR5K_BB_GAIN(29), 0x00000025 }, + { AR5K_BB_GAIN(30), 0x00000028 }, + { AR5K_BB_GAIN(31), 0x00000029 }, + { AR5K_BB_GAIN(32), 0x0000002a }, + { AR5K_BB_GAIN(33), 0x0000002b }, + { AR5K_BB_GAIN(34), 0x0000002c }, + { AR5K_BB_GAIN(35), 0x0000002d }, + { AR5K_BB_GAIN(36), 0x00000030 }, + { AR5K_BB_GAIN(37), 0x00000031 }, + { AR5K_BB_GAIN(38), 0x00000032 }, + { AR5K_BB_GAIN(39), 0x00000033 }, + { AR5K_BB_GAIN(40), 0x00000034 }, + { AR5K_BB_GAIN(41), 0x00000035 }, + { AR5K_BB_GAIN(42), 0x00000035 }, + { AR5K_BB_GAIN(43), 0x00000035 }, + { AR5K_BB_GAIN(44), 0x00000035 }, + { AR5K_BB_GAIN(45), 0x00000035 }, + { AR5K_BB_GAIN(46), 0x00000035 }, + { AR5K_BB_GAIN(47), 0x00000035 }, + { AR5K_BB_GAIN(48), 0x00000035 }, + { AR5K_BB_GAIN(49), 0x00000035 }, + { AR5K_BB_GAIN(50), 0x00000035 }, + { AR5K_BB_GAIN(51), 0x00000035 }, + { AR5K_BB_GAIN(52), 0x00000035 }, + { AR5K_BB_GAIN(53), 0x00000035 }, + { AR5K_BB_GAIN(54), 0x00000035 }, + { AR5K_BB_GAIN(55), 0x00000035 }, + { AR5K_BB_GAIN(56), 0x00000035 }, + { AR5K_BB_GAIN(57), 0x00000035 }, + { AR5K_BB_GAIN(58), 0x00000035 }, + { AR5K_BB_GAIN(59), 0x00000035 }, + { AR5K_BB_GAIN(60), 0x00000035 }, + { AR5K_BB_GAIN(61), 0x00000035 }, + { AR5K_BB_GAIN(62), 0x00000010 }, + { AR5K_BB_GAIN(63), 0x0000001a }, +}; + + +/** + * ath5k_hw_ini_registers() - Write initial register dump common for all modes + * @ah: The &struct ath5k_hw + * @size: Dump size + * @ini_regs: The array of &struct ath5k_ini + * @skip_pcu: Skip PCU registers + */ +static void +ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, + const struct ath5k_ini *ini_regs, bool skip_pcu) +{ + unsigned int i; + + /* Write initial registers */ + for (i = 0; i < size; i++) { + /* Skip PCU registers if + * requested */ + if (skip_pcu && + ini_regs[i].ini_register >= AR5K_PCU_MIN && + ini_regs[i].ini_register <= AR5K_PCU_MAX) + continue; + + switch (ini_regs[i].ini_mode) { + case AR5K_INI_READ: + /* Cleared on read */ + ath5k_hw_reg_read(ah, ini_regs[i].ini_register); + break; + case AR5K_INI_WRITE: + default: + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, ini_regs[i].ini_value, + ini_regs[i].ini_register); + } + } +} + +/** + * ath5k_hw_ini_mode_registers() - Write initial mode-specific register dump + * @ah: The &struct ath5k_hw + * @size: Dump size + * @ini_mode: The array of &struct ath5k_ini_mode + * @mode: One of enum ath5k_driver_mode + */ +static void +ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, + unsigned int size, const struct ath5k_ini_mode *ini_mode, + u8 mode) +{ + unsigned int i; + + for (i = 0; i < size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, ini_mode[i].mode_value[mode], + (u32)ini_mode[i].mode_register); + } + +} + +/** + * ath5k_hw_write_initvals() - Write initial chip-specific register dump + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_driver_mode + * @skip_pcu: Skip PCU registers + * + * Write initial chip-specific register dump, to get the chipset on a + * clean and ready-to-work state after warm reset. + */ +int +ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu) +{ + /* + * Write initial register settings + */ + + /* For AR5212 and compatible */ + if (ah->ah_version == AR5K_AR5212) { + + /* First set of mode-specific settings */ + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(ar5212_ini_mode_start), + ar5212_ini_mode_start, mode); + + /* + * Write initial settings common for all modes + */ + ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5212_ini_common_start), + ar5212_ini_common_start, skip_pcu); + + /* Second set of mode-specific settings */ + switch (ah->ah_radio) { + case AR5K_RF5111: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf5111_ini_mode_end), + rf5111_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5111_ini_common_end), + rf5111_ini_common_end, skip_pcu); + + /* Baseband gain table */ + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5111_ini_bbgain), + rf5111_ini_bbgain, skip_pcu); + + break; + case AR5K_RF5112: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf5112_ini_mode_end), + rf5112_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_common_end), + rf5112_ini_common_end, skip_pcu); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, skip_pcu); + + break; + case AR5K_RF5413: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf5413_ini_mode_end), + rf5413_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5413_ini_common_end), + rf5413_ini_common_end, skip_pcu); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, skip_pcu); + + break; + case AR5K_RF2316: + case AR5K_RF2413: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf2413_ini_mode_end), + rf2413_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf2413_ini_common_end), + rf2413_ini_common_end, skip_pcu); + + /* Override settings from rf2413_ini_common_end */ + if (ah->ah_radio == AR5K_RF2316) { + ath5k_hw_reg_write(ah, 0x00004000, + AR5K_PHY_AGC); + ath5k_hw_reg_write(ah, 0x081b7caa, + 0xa274); + } + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, skip_pcu); + break; + case AR5K_RF2317: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf2413_ini_mode_end), + rf2413_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf2425_ini_common_end), + rf2425_ini_common_end, skip_pcu); + + /* Override settings from rf2413_ini_mode_end */ + ath5k_hw_reg_write(ah, 0x00180a65, AR5K_PHY_GAIN); + + /* Override settings from rf2413_ini_common_end */ + ath5k_hw_reg_write(ah, 0x00004000, AR5K_PHY_AGC); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TPC_RG5, + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP, 0xa); + ath5k_hw_reg_write(ah, 0x800000a8, 0x8140); + ath5k_hw_reg_write(ah, 0x000000ff, 0x9958); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, skip_pcu); + break; + case AR5K_RF2425: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf2425_ini_mode_end), + rf2425_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf2425_ini_common_end), + rf2425_ini_common_end, skip_pcu); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, skip_pcu); + break; + default: + return -EINVAL; + + } + + /* For AR5211 */ + } else if (ah->ah_version == AR5K_AR5211) { + + /* AR5K_MODE_11B */ + if (mode > 2) { + ATH5K_ERR(ah, "unsupported channel mode: %d\n", mode); + return -EINVAL; + } + + /* Mode-specific settings */ + ath5k_hw_ini_mode_registers(ah, ARRAY_SIZE(ar5211_ini_mode), + ar5211_ini_mode, mode); + + /* + * Write initial settings common for all modes + */ + ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5211_ini), + ar5211_ini, skip_pcu); + + /* AR5211 only comes with 5111 */ + + /* Baseband gain table */ + ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain), + rf5111_ini_bbgain, skip_pcu); + /* For AR5210 (for mode settings check out ath5k_hw_reset_tx_queue) */ + } else if (ah->ah_version == AR5K_AR5210) { + ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5210_ini), + ar5210_ini, skip_pcu); + } + + return 0; +} diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c new file mode 100644 index 000000000..33e9928af --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -0,0 +1,205 @@ +/* + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2009 Bob Copeland <me@bobcopeland.com> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/pci.h> +#include "ath5k.h" + +#define ATH_SDEVICE(subv, subd) \ + .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \ + .subvendor = (subv), .subdevice = (subd) + +#define ATH_LED(pin, polarity) .driver_data = (((pin) << 8) | (polarity)) +#define ATH_PIN(data) ((data) >> 8) +#define ATH_POLARITY(data) ((data) & 0xff) + +/* Devices we match on for LED config info (typically laptops) */ +static const struct pci_device_id ath5k_led_devices[] = { + /* AR5211 */ + { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5211), ATH_LED(0, 0) }, + /* HP Compaq nc6xx, nc4000, nx6000 */ + { ATH_SDEVICE(PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID), ATH_LED(1, 1) }, + /* Acer Aspire One A150 (maximlevitsky@gmail.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe008), ATH_LED(3, 0) }, + /* Acer Aspire One AO531h AO751h (keng-yu.lin@canonical.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe00d), ATH_LED(3, 0) }, + /* Acer Ferrari 5000 (russ.dill@gmail.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) }, + /* E-machines E510 (tuliom@gmail.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) }, + /* BenQ Joybook R55v (nowymarluk@wp.pl) */ + { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) }, + /* Acer Extensa 5620z (nekoreeve@gmail.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) }, + /* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */ + { ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) }, + /* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */ + { ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) }, + /* HP Compaq CQ60-206US (ddreggors@jumptv.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) }, + /* HP Compaq C700 (nitrousnrg@gmail.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 0) }, + /* LiteOn AR5BXB63 (magooz@salug.it) */ + { ATH_SDEVICE(PCI_VENDOR_ID_ATHEROS, 0x3067), ATH_LED(3, 0) }, + /* IBM-specific AR5212 (all others) */ + { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) }, + /* Dell Vostro A860 (shahar@shahar-or.co.il) */ + { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0112), ATH_LED(3, 0) }, + { } +}; + +void ath5k_led_enable(struct ath5k_hw *ah) +{ + if (IS_ENABLED(CONFIG_MAC80211_LEDS) && + test_bit(ATH_STAT_LEDSOFT, ah->status)) { + ath5k_hw_set_gpio_output(ah, ah->led_pin); + ath5k_led_off(ah); + } +} + +static void ath5k_led_on(struct ath5k_hw *ah) +{ + if (!test_bit(ATH_STAT_LEDSOFT, ah->status)) + return; + ath5k_hw_set_gpio(ah, ah->led_pin, ah->led_on); +} + +void ath5k_led_off(struct ath5k_hw *ah) +{ + if (!IS_ENABLED(CONFIG_MAC80211_LEDS) || + !test_bit(ATH_STAT_LEDSOFT, ah->status)) + return; + ath5k_hw_set_gpio(ah, ah->led_pin, !ah->led_on); +} + +static void +ath5k_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct ath5k_led *led = container_of(led_dev, struct ath5k_led, + led_dev); + + if (brightness == LED_OFF) + ath5k_led_off(led->ah); + else + ath5k_led_on(led->ah); +} + +static int +ath5k_register_led(struct ath5k_hw *ah, struct ath5k_led *led, + const char *name, const char *trigger) +{ + int err; + + led->ah = ah; + strncpy(led->name, name, sizeof(led->name)); + led->name[sizeof(led->name)-1] = 0; + led->led_dev.name = led->name; + led->led_dev.default_trigger = trigger; + led->led_dev.brightness_set = ath5k_led_brightness_set; + + err = led_classdev_register(ah->dev, &led->led_dev); + if (err) { + ATH5K_WARN(ah, "could not register LED %s\n", name); + led->ah = NULL; + } + return err; +} + +static void +ath5k_unregister_led(struct ath5k_led *led) +{ + if (!IS_ENABLED(CONFIG_MAC80211_LEDS) || !led->ah) + return; + led_classdev_unregister(&led->led_dev); + ath5k_led_off(led->ah); + led->ah = NULL; +} + +void ath5k_unregister_leds(struct ath5k_hw *ah) +{ + ath5k_unregister_led(&ah->rx_led); + ath5k_unregister_led(&ah->tx_led); +} + +int ath5k_init_leds(struct ath5k_hw *ah) +{ + int ret = 0; + struct ieee80211_hw *hw = ah->hw; +#ifndef CONFIG_ATH5K_AHB + struct pci_dev *pdev = ah->pdev; +#endif + char name[ATH5K_LED_MAX_NAME_LEN + 1]; + const struct pci_device_id *match; + + if (!IS_ENABLED(CONFIG_MAC80211_LEDS) || !ah->pdev) + return 0; + +#ifdef CONFIG_ATH5K_AHB + match = NULL; +#else + match = pci_match_id(&ath5k_led_devices[0], pdev); +#endif + if (match) { + __set_bit(ATH_STAT_LEDSOFT, ah->status); + ah->led_pin = ATH_PIN(match->driver_data); + ah->led_on = ATH_POLARITY(match->driver_data); + } + + if (!test_bit(ATH_STAT_LEDSOFT, ah->status)) + goto out; + + ath5k_led_enable(ah); + + snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy)); + ret = ath5k_register_led(ah, &ah->rx_led, name, + ieee80211_get_rx_led_name(hw)); + if (ret) + goto out; + + snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy)); + ret = ath5k_register_led(ah, &ah->tx_led, name, + ieee80211_get_tx_led_name(hw)); +out: + return ret; +} + diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c new file mode 100644 index 000000000..ed5d2160a --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -0,0 +1,821 @@ +/*- + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2006 Devicescape Software, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2010 Bruno Randolf <br1@einfach.org> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <net/mac80211.h> +#include <asm/unaligned.h> + +#include "ath5k.h" +#include "base.h" +#include "reg.h" + +/********************\ +* Mac80211 functions * +\********************/ + +static void +ath5k_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct ath5k_hw *ah = hw->priv; + u16 qnum = skb_get_queue_mapping(skb); + + if (WARN_ON(qnum >= ah->ah_capabilities.cap_queues.q_tx_num)) { + ieee80211_free_txskb(hw, skb); + return; + } + + ath5k_tx_queue(hw, skb, &ah->txqs[qnum], control); +} + + +static int +ath5k_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct ath5k_hw *ah = hw->priv; + int ret; + struct ath5k_vif *avf = (void *)vif->drv_priv; + + mutex_lock(&ah->lock); + + if ((vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_ADHOC) + && (ah->num_ap_vifs + ah->num_adhoc_vifs) >= ATH_BCBUF) { + ret = -ELNRNG; + goto end; + } + + /* Don't allow other interfaces if one ad-hoc is configured. + * TODO: Fix the problems with ad-hoc and multiple other interfaces. + * We would need to operate the HW in ad-hoc mode to allow TSF updates + * for the IBSS, but this breaks with additional AP or STA interfaces + * at the moment. */ + if (ah->num_adhoc_vifs || + (ah->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) { + ATH5K_ERR(ah, "Only one single ad-hoc interface is allowed.\n"); + ret = -ELNRNG; + goto end; + } + + switch (vif->type) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + avf->opmode = vif->type; + break; + default: + ret = -EOPNOTSUPP; + goto end; + } + + ah->nvifs++; + ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode); + + /* Assign the vap/adhoc to a beacon xmit slot. */ + if ((avf->opmode == NL80211_IFTYPE_AP) || + (avf->opmode == NL80211_IFTYPE_ADHOC) || + (avf->opmode == NL80211_IFTYPE_MESH_POINT)) { + int slot; + + WARN_ON(list_empty(&ah->bcbuf)); + avf->bbuf = list_first_entry(&ah->bcbuf, struct ath5k_buf, + list); + list_del(&avf->bbuf->list); + + avf->bslot = 0; + for (slot = 0; slot < ATH_BCBUF; slot++) { + if (!ah->bslot[slot]) { + avf->bslot = slot; + break; + } + } + BUG_ON(ah->bslot[avf->bslot] != NULL); + ah->bslot[avf->bslot] = vif; + if (avf->opmode == NL80211_IFTYPE_AP) + ah->num_ap_vifs++; + else if (avf->opmode == NL80211_IFTYPE_ADHOC) + ah->num_adhoc_vifs++; + else if (avf->opmode == NL80211_IFTYPE_MESH_POINT) + ah->num_mesh_vifs++; + } + + /* Any MAC address is fine, all others are included through the + * filter. + */ + ath5k_hw_set_lladdr(ah, vif->addr); + + ath5k_update_bssid_mask_and_opmode(ah, vif); + ret = 0; +end: + mutex_unlock(&ah->lock); + return ret; +} + + +static void +ath5k_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct ath5k_hw *ah = hw->priv; + struct ath5k_vif *avf = (void *)vif->drv_priv; + unsigned int i; + + mutex_lock(&ah->lock); + ah->nvifs--; + + if (avf->bbuf) { + ath5k_txbuf_free_skb(ah, avf->bbuf); + list_add_tail(&avf->bbuf->list, &ah->bcbuf); + for (i = 0; i < ATH_BCBUF; i++) { + if (ah->bslot[i] == vif) { + ah->bslot[i] = NULL; + break; + } + } + avf->bbuf = NULL; + } + if (avf->opmode == NL80211_IFTYPE_AP) + ah->num_ap_vifs--; + else if (avf->opmode == NL80211_IFTYPE_ADHOC) + ah->num_adhoc_vifs--; + else if (avf->opmode == NL80211_IFTYPE_MESH_POINT) + ah->num_mesh_vifs--; + + ath5k_update_bssid_mask_and_opmode(ah, NULL); + mutex_unlock(&ah->lock); +} + + +/* + * TODO: Phy disable/diversity etc + */ +static int +ath5k_config(struct ieee80211_hw *hw, u32 changed) +{ + struct ath5k_hw *ah = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + int ret = 0; + int i; + + mutex_lock(&ah->lock); + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + ret = ath5k_chan_set(ah, &conf->chandef); + if (ret < 0) + goto unlock; + } + + if ((changed & IEEE80211_CONF_CHANGE_POWER) && + (ah->ah_txpower.txp_requested != conf->power_level)) { + ah->ah_txpower.txp_requested = conf->power_level; + + /* Half dB steps */ + ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2)); + } + + if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { + ah->ah_retry_long = conf->long_frame_max_tx_count; + ah->ah_retry_short = conf->short_frame_max_tx_count; + + for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) + ath5k_hw_set_tx_retry_limits(ah, i); + } + + /* TODO: + * 1) Move this on config_interface and handle each case + * separately eg. when we have only one STA vif, use + * AR5K_ANTMODE_SINGLE_AP + * + * 2) Allow the user to change antenna mode eg. when only + * one antenna is present + * + * 3) Allow the user to set default/tx antenna when possible + * + * 4) Default mode should handle 90% of the cases, together + * with fixed a/b and single AP modes we should be able to + * handle 99%. Sectored modes are extreme cases and i still + * haven't found a usage for them. If we decide to support them, + * then we must allow the user to set how many tx antennas we + * have available + */ + ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); + +unlock: + mutex_unlock(&ah->lock); + return ret; +} + + +static void +ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, u64 changes) +{ + struct ath5k_vif *avf = (void *)vif->drv_priv; + struct ath5k_hw *ah = hw->priv; + struct ath_common *common = ath5k_hw_common(ah); + + mutex_lock(&ah->lock); + + if (changes & BSS_CHANGED_BSSID) { + /* Cache for later use during resets */ + memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); + common->curaid = 0; + ath5k_hw_set_bssid(ah); + } + + if (changes & BSS_CHANGED_BEACON_INT) + ah->bintval = bss_conf->beacon_int; + + if (changes & BSS_CHANGED_ERP_SLOT) { + int slot_time; + + ah->ah_short_slot = bss_conf->use_short_slot; + slot_time = ath5k_hw_get_default_slottime(ah) + + 3 * ah->ah_coverage_class; + ath5k_hw_set_ifs_intervals(ah, slot_time); + } + + if (changes & BSS_CHANGED_ASSOC) { + avf->assoc = vif->cfg.assoc; + if (vif->cfg.assoc) + ah->assoc = vif->cfg.assoc; + else + ah->assoc = ath5k_any_vif_assoc(ah); + + if (ah->opmode == NL80211_IFTYPE_STATION) + ath5k_set_beacon_filter(hw, ah->assoc); + ath5k_hw_set_ledstate(ah, ah->assoc ? + AR5K_LED_ASSOC : AR5K_LED_INIT); + if (vif->cfg.assoc) { + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, + "Bss Info ASSOC %d, bssid: %pM\n", + vif->cfg.aid, common->curbssid); + common->curaid = vif->cfg.aid; + ath5k_hw_set_bssid(ah); + /* Once ANI is available you would start it here */ + } + } + + if (changes & BSS_CHANGED_BEACON) { + spin_lock_bh(&ah->block); + ath5k_beacon_update(hw, vif); + spin_unlock_bh(&ah->block); + } + + if (changes & BSS_CHANGED_BEACON_ENABLED) + ah->enable_beacon = bss_conf->enable_beacon; + + if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED | + BSS_CHANGED_BEACON_INT)) + ath5k_beacon_config(ah); + + mutex_unlock(&ah->lock); +} + + +static u64 +ath5k_prepare_multicast(struct ieee80211_hw *hw, + struct netdev_hw_addr_list *mc_list) +{ + u32 mfilt[2], val; + u8 pos; + struct netdev_hw_addr *ha; + + mfilt[0] = 0; + mfilt[1] = 0; + + netdev_hw_addr_list_for_each(ha, mc_list) { + /* calculate XOR of eight 6-bit values */ + val = get_unaligned_le32(ha->addr + 0); + pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; + val = get_unaligned_le32(ha->addr + 3); + pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; + pos &= 0x3f; + mfilt[pos / 32] |= (1 << (pos % 32)); + /* XXX: we might be able to just do this instead, + * but not sure, needs testing, if we do use this we'd + * need to inform below not to reset the mcast */ + /* ath5k_hw_set_mcast_filterindex(ah, + * ha->addr[5]); */ + } + + return ((u64)(mfilt[1]) << 32) | mfilt[0]; +} + + +/* + * o always accept unicast, broadcast, and multicast traffic + * o multicast traffic for all BSSIDs will be enabled if mac80211 + * says it should be + * o maintain current state of phy ofdm or phy cck error reception. + * If the hardware detects any of these type of errors then + * ath5k_hw_get_rx_filter() will pass to us the respective + * hardware filters to be able to receive these type of frames. + * o probe request frames are accepted only when operating in + * hostap, adhoc, or monitor modes + * o enable promiscuous mode according to the interface state + * o accept beacons: + * - when operating in adhoc mode so the 802.11 layer creates + * node table entries for peers, + * - when operating in station mode for collecting rssi data when + * the station is otherwise quiet, or + * - when scanning + */ +static void +ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, + unsigned int *new_flags, u64 multicast) +{ +#define SUPPORTED_FIF_FLAGS \ + (FIF_ALLMULTI | FIF_FCSFAIL | \ + FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \ + FIF_BCN_PRBRESP_PROMISC) + + struct ath5k_hw *ah = hw->priv; + u32 mfilt[2], rfilt; + struct ath5k_vif_iter_data iter_data; /* to count STA interfaces */ + + mutex_lock(&ah->lock); + + mfilt[0] = multicast; + mfilt[1] = multicast >> 32; + + /* Only deal with supported flags */ + changed_flags &= SUPPORTED_FIF_FLAGS; + *new_flags &= SUPPORTED_FIF_FLAGS; + + /* If HW detects any phy or radar errors, leave those filters on. + * Also, always enable Unicast, Broadcasts and Multicast + * XXX: move unicast, bssid broadcasts and multicast to mac80211 */ + rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) | + (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST | + AR5K_RX_FILTER_MCAST); + + /* Note, AR5K_RX_FILTER_MCAST is already enabled */ + if (*new_flags & FIF_ALLMULTI) { + mfilt[0] = ~0; + mfilt[1] = ~0; + } + + /* This is the best we can do */ + if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL)) + rfilt |= AR5K_RX_FILTER_PHYERR; + + /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons + * and probes for any BSSID */ + if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (ah->nvifs > 1)) + rfilt |= AR5K_RX_FILTER_BEACON; + + /* FIF_CONTROL doc says we should only pass on control frames for this + * station. This needs testing. I believe right now this + * enables *all* control frames, which is OK.. but + * we should see if we can improve on granularity */ + if (*new_flags & FIF_CONTROL) + rfilt |= AR5K_RX_FILTER_CONTROL; + + /* Additional settings per mode -- this is per ath5k */ + + /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */ + + switch (ah->opmode) { + case NL80211_IFTYPE_MESH_POINT: + rfilt |= AR5K_RX_FILTER_CONTROL | + AR5K_RX_FILTER_BEACON | + AR5K_RX_FILTER_PROBEREQ | + AR5K_RX_FILTER_PROM; + break; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_ADHOC: + rfilt |= AR5K_RX_FILTER_PROBEREQ | + AR5K_RX_FILTER_BEACON; + break; + case NL80211_IFTYPE_STATION: + if (ah->assoc) + rfilt |= AR5K_RX_FILTER_BEACON; + break; + default: + break; + } + + iter_data.hw_macaddr = NULL; + iter_data.n_stas = 0; + iter_data.need_set_hw_addr = false; + ieee80211_iterate_active_interfaces_atomic( + ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + ath5k_vif_iter, &iter_data); + + /* Set up RX Filter */ + if (iter_data.n_stas > 1) { + /* If you have multiple STA interfaces connected to + * different APs, ARPs are not received (most of the time?) + * Enabling PROMISC appears to fix that problem. + */ + rfilt |= AR5K_RX_FILTER_PROM; + } + + /* Set filters */ + ath5k_hw_set_rx_filter(ah, rfilt); + + /* Set multicast bits */ + ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]); + /* Set the cached hw filter flags, this will later actually + * be set in HW */ + ah->filter_flags = rfilt; + /* Store current FIF filter flags */ + ah->fif_filter_flags = *new_flags; + + mutex_unlock(&ah->lock); +} + + +static int +ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct ath5k_hw *ah = hw->priv; + struct ath_common *common = ath5k_hw_common(ah); + int ret = 0; + + if (ath5k_modparam_nohwcrypt) + return -EOPNOTSUPP; + + if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT) + return -EOPNOTSUPP; + + if (vif->type == NL80211_IFTYPE_ADHOC && + (key->cipher == WLAN_CIPHER_SUITE_TKIP || + key->cipher == WLAN_CIPHER_SUITE_CCMP) && + !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { + /* don't program group keys when using IBSS_RSN */ + return -EOPNOTSUPP; + } + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + case WLAN_CIPHER_SUITE_TKIP: + break; + case WLAN_CIPHER_SUITE_CCMP: + if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM) + break; + return -EOPNOTSUPP; + default: + return -EOPNOTSUPP; + } + + mutex_lock(&ah->lock); + + switch (cmd) { + case SET_KEY: + ret = ath_key_config(common, vif, sta, key); + if (ret >= 0) { + key->hw_key_idx = ret; + /* push IV and Michael MIC generation to stack */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + if (key->cipher == WLAN_CIPHER_SUITE_TKIP) + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + if (key->cipher == WLAN_CIPHER_SUITE_CCMP) + key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; + ret = 0; + } + break; + case DISABLE_KEY: + ath_key_delete(common, key->hw_key_idx); + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&ah->lock); + return ret; +} + + +static void +ath5k_sw_scan_start(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *mac_addr) +{ + struct ath5k_hw *ah = hw->priv; + if (!ah->assoc) + ath5k_hw_set_ledstate(ah, AR5K_LED_SCAN); +} + + +static void +ath5k_sw_scan_complete(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct ath5k_hw *ah = hw->priv; + ath5k_hw_set_ledstate(ah, ah->assoc ? + AR5K_LED_ASSOC : AR5K_LED_INIT); +} + + +static int +ath5k_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats) +{ + struct ath5k_hw *ah = hw->priv; + + /* Force update */ + ath5k_hw_update_mib_counters(ah); + + stats->dot11ACKFailureCount = ah->stats.ack_fail; + stats->dot11RTSFailureCount = ah->stats.rts_fail; + stats->dot11RTSSuccessCount = ah->stats.rts_ok; + stats->dot11FCSErrorCount = ah->stats.fcs_error; + + return 0; +} + + +static int +ath5k_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + unsigned int link_id, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct ath5k_hw *ah = hw->priv; + struct ath5k_txq_info qi; + int ret = 0; + + if (queue >= ah->ah_capabilities.cap_queues.q_tx_num) + return 0; + + mutex_lock(&ah->lock); + + ath5k_hw_get_tx_queueprops(ah, queue, &qi); + + qi.tqi_aifs = params->aifs; + qi.tqi_cw_min = params->cw_min; + qi.tqi_cw_max = params->cw_max; + qi.tqi_burst_time = params->txop * 32; + + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, + "Configure tx [queue %d], " + "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", + queue, params->aifs, params->cw_min, + params->cw_max, params->txop); + + if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) { + ATH5K_ERR(ah, + "Unable to update hardware queue %u!\n", queue); + ret = -EIO; + } else + ath5k_hw_reset_tx_queue(ah, queue); + + mutex_unlock(&ah->lock); + + return ret; +} + + +static u64 +ath5k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct ath5k_hw *ah = hw->priv; + + return ath5k_hw_get_tsf64(ah); +} + + +static void +ath5k_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u64 tsf) +{ + struct ath5k_hw *ah = hw->priv; + + ath5k_hw_set_tsf64(ah, tsf); +} + + +static void +ath5k_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct ath5k_hw *ah = hw->priv; + + /* + * in IBSS mode we need to update the beacon timers too. + * this will also reset the TSF if we call it with 0 + */ + if (ah->opmode == NL80211_IFTYPE_ADHOC) + ath5k_beacon_update_timers(ah, 0); + else + ath5k_hw_reset_tsf(ah); +} + + +static int +ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey) +{ + struct ath5k_hw *ah = hw->priv; + struct ieee80211_conf *conf = &hw->conf; + struct ath_common *common = ath5k_hw_common(ah); + struct ath_cycle_counters *cc = &common->cc_survey; + unsigned int div = common->clockrate * 1000; + + if (idx != 0) + return -ENOENT; + + spin_lock_bh(&common->cc_lock); + ath_hw_cycle_counters_update(common); + if (cc->cycles > 0) { + ah->survey.time += cc->cycles / div; + ah->survey.time_busy += cc->rx_busy / div; + ah->survey.time_rx += cc->rx_frame / div; + ah->survey.time_tx += cc->tx_frame / div; + } + memset(cc, 0, sizeof(*cc)); + spin_unlock_bh(&common->cc_lock); + + memcpy(survey, &ah->survey, sizeof(*survey)); + + survey->channel = conf->chandef.chan; + survey->noise = ah->ah_noise_floor; + survey->filled = SURVEY_INFO_NOISE_DBM | + SURVEY_INFO_IN_USE | + SURVEY_INFO_TIME | + SURVEY_INFO_TIME_BUSY | + SURVEY_INFO_TIME_RX | + SURVEY_INFO_TIME_TX; + + return 0; +} + + +/** + * ath5k_set_coverage_class - Set IEEE 802.11 coverage class + * + * @hw: struct ieee80211_hw pointer + * @coverage_class: IEEE 802.11 coverage class number + * + * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given + * coverage class. The values are persistent, they are restored after device + * reset. + */ +static void +ath5k_set_coverage_class(struct ieee80211_hw *hw, s16 coverage_class) +{ + struct ath5k_hw *ah = hw->priv; + + mutex_lock(&ah->lock); + ath5k_hw_set_coverage_class(ah, coverage_class); + mutex_unlock(&ah->lock); +} + + +static int +ath5k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) +{ + struct ath5k_hw *ah = hw->priv; + + if (tx_ant == 1 && rx_ant == 1) + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_A); + else if (tx_ant == 2 && rx_ant == 2) + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_FIXED_B); + else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3) + ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT); + else + return -EINVAL; + return 0; +} + + +static int +ath5k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) +{ + struct ath5k_hw *ah = hw->priv; + + switch (ah->ah_ant_mode) { + case AR5K_ANTMODE_FIXED_A: + *tx_ant = 1; *rx_ant = 1; break; + case AR5K_ANTMODE_FIXED_B: + *tx_ant = 2; *rx_ant = 2; break; + case AR5K_ANTMODE_DEFAULT: + *tx_ant = 3; *rx_ant = 3; break; + } + return 0; +} + + +static void ath5k_get_ringparam(struct ieee80211_hw *hw, + u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max) +{ + struct ath5k_hw *ah = hw->priv; + + *tx = ah->txqs[AR5K_TX_QUEUE_ID_DATA_MIN].txq_max; + + *tx_max = ATH5K_TXQ_LEN_MAX; + *rx = *rx_max = ATH_RXBUF; +} + + +static int ath5k_set_ringparam(struct ieee80211_hw *hw, u32 tx, u32 rx) +{ + struct ath5k_hw *ah = hw->priv; + u16 qnum; + + /* only support setting tx ring size for now */ + if (rx != ATH_RXBUF) + return -EINVAL; + + /* restrict tx ring size min/max */ + if (!tx || tx > ATH5K_TXQ_LEN_MAX) + return -EINVAL; + + for (qnum = 0; qnum < ARRAY_SIZE(ah->txqs); qnum++) { + if (!ah->txqs[qnum].setup) + continue; + if (ah->txqs[qnum].qnum < AR5K_TX_QUEUE_ID_DATA_MIN || + ah->txqs[qnum].qnum > AR5K_TX_QUEUE_ID_DATA_MAX) + continue; + + ah->txqs[qnum].txq_max = tx; + if (ah->txqs[qnum].txq_len >= ah->txqs[qnum].txq_max) + ieee80211_stop_queue(hw, ah->txqs[qnum].qnum); + } + + return 0; +} + + +const struct ieee80211_ops ath5k_hw_ops = { + .tx = ath5k_tx, + .start = ath5k_start, + .stop = ath5k_stop, + .add_interface = ath5k_add_interface, + /* .change_interface = not implemented */ + .remove_interface = ath5k_remove_interface, + .config = ath5k_config, + .bss_info_changed = ath5k_bss_info_changed, + .prepare_multicast = ath5k_prepare_multicast, + .configure_filter = ath5k_configure_filter, + /* .set_tim = not implemented */ + .set_key = ath5k_set_key, + /* .update_tkip_key = not implemented */ + /* .hw_scan = not implemented */ + .sw_scan_start = ath5k_sw_scan_start, + .sw_scan_complete = ath5k_sw_scan_complete, + .get_stats = ath5k_get_stats, + /* .set_frag_threshold = not implemented */ + /* .set_rts_threshold = not implemented */ + /* .sta_add = not implemented */ + /* .sta_remove = not implemented */ + /* .sta_notify = not implemented */ + .conf_tx = ath5k_conf_tx, + .get_tsf = ath5k_get_tsf, + .set_tsf = ath5k_set_tsf, + .reset_tsf = ath5k_reset_tsf, + /* .tx_last_beacon = not implemented */ + /* .ampdu_action = not needed */ + .get_survey = ath5k_get_survey, + .set_coverage_class = ath5k_set_coverage_class, + /* .rfkill_poll = not implemented */ + /* .flush = not implemented */ + /* .channel_switch = not implemented */ + /* .napi_poll = not implemented */ + .set_antenna = ath5k_set_antenna, + .get_antenna = ath5k_get_antenna, + .set_ringparam = ath5k_set_ringparam, + .get_ringparam = ath5k_get_ringparam, +}; diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c new file mode 100644 index 000000000..86b8cb975 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -0,0 +1,341 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/nl80211.h> +#include <linux/pci.h> +#include <linux/etherdevice.h> +#include <linux/module.h> +#include "../ath.h" +#include "ath5k.h" +#include "debug.h" +#include "base.h" +#include "reg.h" + +/* Known PCI ids */ +static const struct pci_device_id ath5k_pci_id_table[] = { + { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */ + { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */ + { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/ + { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */ + { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */ + { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */ + { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */ + { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */ + { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */ + { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */ + { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */ + { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */ + { PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */ + { 0 } +}; +MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); + +/* return bus cachesize in 4B word units */ +static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz) +{ + struct ath5k_hw *ah = (struct ath5k_hw *) common->priv; + u8 u8tmp; + + pci_read_config_byte(ah->pdev, PCI_CACHE_LINE_SIZE, &u8tmp); + *csz = (int)u8tmp; + + /* + * This check was put in to avoid "unpleasant" consequences if + * the bootrom has not fully initialized all PCI devices. + * Sometimes the cache line size register is not set + */ + + if (*csz == 0) + *csz = L1_CACHE_BYTES >> 2; /* Use the default size */ +} + +/* + * Read from eeprom + */ +static bool +ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data) +{ + struct ath5k_hw *ah = (struct ath5k_hw *) common->ah; + u32 status, timeout; + + /* + * Initialize EEPROM access + */ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); + (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); + } else { + ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_READ); + } + + for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { + status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); + if (status & AR5K_EEPROM_STAT_RDDONE) { + if (status & AR5K_EEPROM_STAT_RDERR) + return false; + *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & + 0xffff); + return true; + } + usleep_range(15, 20); + } + + return false; +} + +int ath5k_hw_read_srev(struct ath5k_hw *ah) +{ + ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV); + return 0; +} + +/* + * Read the MAC address from eeprom or platform_data + */ +static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + u8 mac_d[ETH_ALEN] = {}; + u32 total, offset; + u16 data; + int octet; + + AR5K_EEPROM_READ(0x20, data); + + for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { + AR5K_EEPROM_READ(offset, data); + + total += data; + mac_d[octet + 1] = data & 0xff; + mac_d[octet] = data >> 8; + octet += 2; + } + + if (!total || total == 3 * 0xffff) + return -EINVAL; + + memcpy(mac, mac_d, ETH_ALEN); + + return 0; +} + + +/* Common ath_bus_opts structure */ +static const struct ath_bus_ops ath_pci_bus_ops = { + .ath_bus_type = ATH_PCI, + .read_cachesize = ath5k_pci_read_cachesize, + .eeprom_read = ath5k_pci_eeprom_read, + .eeprom_read_mac = ath5k_pci_eeprom_read_mac, +}; + +/********************\ +* PCI Initialization * +\********************/ + +static int +ath5k_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + void __iomem *mem; + struct ath5k_hw *ah; + struct ieee80211_hw *hw; + int ret; + u8 csz; + + /* + * L0s needs to be disabled on all ath5k cards. + * + * For distributions shipping with CONFIG_PCIEASPM (this will be enabled + * by default in the future in 2.6.36) this will also mean both L1 and + * L0s will be disabled when a pre 1.1 PCIe device is detected. We do + * know L1 works correctly even for all ath5k pre 1.1 PCIe devices + * though but cannot currently undue the effect of a blacklist, for + * details you can read pcie_aspm_sanity_check() and see how it adjusts + * the device link capability. + * + * It may be possible in the future to implement some PCI API to allow + * drivers to override blacklists for pre 1.1 PCIe but for now it is + * best to accept that both L0s and L1 will be disabled completely for + * distributions shipping with CONFIG_PCIEASPM rather than having this + * issue present. Motivation for adding this new API will be to help + * with power consumption for some of these devices. + */ + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device\n"); + goto err; + } + + /* XXX 32-bit addressing only */ + ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(&pdev->dev, "32-bit DMA not available\n"); + goto err_dis; + } + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); + if (csz == 0) { + /* + * Linux 2.4.18 (at least) writes the cache line size + * register as a 16-bit wide register which is wrong. + * We must have this setup properly for rx buffer + * DMA to work so force a reasonable value here if it + * comes up zero. + */ + csz = L1_CACHE_BYTES >> 2; + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); + } + /* + * The default setting of latency timer yields poor results, + * set it to the value used by other systems. It may be worth + * tweaking this setting more. + */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); + + /* Enable bus mastering */ + pci_set_master(pdev); + + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_write_config_byte(pdev, 0x41, 0); + + ret = pci_request_region(pdev, 0, "ath5k"); + if (ret) { + dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); + goto err_dis; + } + + mem = pci_iomap(pdev, 0, 0); + if (!mem) { + dev_err(&pdev->dev, "cannot remap PCI memory region\n"); + ret = -EIO; + goto err_reg; + } + + /* + * Allocate hw (mac80211 main struct) + * and hw->priv (driver private data) + */ + hw = ieee80211_alloc_hw(sizeof(*ah), &ath5k_hw_ops); + if (hw == NULL) { + dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); + ret = -ENOMEM; + goto err_map; + } + + dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); + + ah = hw->priv; + ah->hw = hw; + ah->pdev = pdev; + ah->dev = &pdev->dev; + ah->irq = pdev->irq; + ah->devid = id->device; + ah->iobase = mem; /* So we can unmap it on detach */ + + /* Initialize */ + ret = ath5k_init_ah(ah, &ath_pci_bus_ops); + if (ret) + goto err_free; + + /* Set private data */ + pci_set_drvdata(pdev, hw); + + return 0; +err_free: + ieee80211_free_hw(hw); +err_map: + pci_iounmap(pdev, mem); +err_reg: + pci_release_region(pdev, 0); +err_dis: + pci_disable_device(pdev); +err: + return ret; +} + +static void +ath5k_pci_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_hw *ah = hw->priv; + + ath5k_deinit_ah(ah); + pci_iounmap(pdev, ah->iobase); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + ieee80211_free_hw(hw); +} + +#ifdef CONFIG_PM_SLEEP +static int ath5k_pci_suspend(struct device *dev) +{ + struct ieee80211_hw *hw = dev_get_drvdata(dev); + struct ath5k_hw *ah = hw->priv; + + ath5k_led_off(ah); + return 0; +} + +static int ath5k_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_hw *ah = hw->priv; + + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state + */ + pci_write_config_byte(pdev, 0x41, 0); + + ath5k_led_enable(ah); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); +#define ATH5K_PM_OPS (&ath5k_pm_ops) +#else +#define ATH5K_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static struct pci_driver ath5k_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ath5k_pci_id_table, + .probe = ath5k_pci_probe, + .remove = ath5k_pci_remove, + .driver.pm = ATH5K_PM_OPS, +}; + +module_pci_driver(ath5k_pci_driver); diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c new file mode 100644 index 000000000..3f4ce4e9c --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -0,0 +1,1011 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*********************************\ +* Protocol Control Unit Functions * +\*********************************/ + +#include <asm/unaligned.h> + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + +/** + * DOC: Protocol Control Unit (PCU) functions + * + * Protocol control unit is responsible to maintain various protocol + * properties before a frame is send and after a frame is received to/from + * baseband. To be more specific, PCU handles: + * + * - Buffering of RX and TX frames (after QCU/DCUs) + * + * - Encrypting and decrypting (using the built-in engine) + * + * - Generating ACKs, RTS/CTS frames + * + * - Maintaining TSF + * + * - FCS + * + * - Updating beacon data (with TSF etc) + * + * - Generating virtual CCA + * + * - RX/Multicast filtering + * + * - BSSID filtering + * + * - Various statistics + * + * -Different operating modes: AP, STA, IBSS + * + * Note: Most of these functions can be tweaked/bypassed so you can do + * them on sw above for debugging or research. For more infos check out PCU + * registers on reg.h. + */ + +/** + * DOC: ACK rates + * + * AR5212+ can use higher rates for ack transmission + * based on current tx rate instead of the base rate. + * It does this to better utilize channel usage. + * There is a mapping between G rates (that cover both + * CCK and OFDM) and ack rates that we use when setting + * rate -> duration table. This mapping is hw-based so + * don't change anything. + * + * To enable this functionality we must set + * ah->ah_ack_bitrate_high to true else base rate is + * used (1Mb for CCK, 6Mb for OFDM). + */ +static const unsigned int ack_rates_high[] = +/* Tx -> ACK */ +/* 1Mb -> 1Mb */ { 0, +/* 2MB -> 2Mb */ 1, +/* 5.5Mb -> 2Mb */ 1, +/* 11Mb -> 2Mb */ 1, +/* 6Mb -> 6Mb */ 4, +/* 9Mb -> 6Mb */ 4, +/* 12Mb -> 12Mb */ 6, +/* 18Mb -> 12Mb */ 6, +/* 24Mb -> 24Mb */ 8, +/* 36Mb -> 24Mb */ 8, +/* 48Mb -> 24Mb */ 8, +/* 54Mb -> 24Mb */ 8 }; + +/*******************\ +* Helper functions * +\*******************/ + +/** + * ath5k_hw_get_frame_duration() - Get tx time of a frame + * @ah: The &struct ath5k_hw + * @band: One of enum nl80211_band + * @len: Frame's length in bytes + * @rate: The @struct ieee80211_rate + * @shortpre: Indicate short preample + * + * Calculate tx duration of a frame given it's rate and length + * It extends ieee80211_generic_frame_duration for non standard + * bwmodes. + */ +int +ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum nl80211_band band, + int len, struct ieee80211_rate *rate, bool shortpre) +{ + int sifs, preamble, plcp_bits, sym_time; + int bitrate, bits, symbols, symbol_bits; + int dur; + + /* Fallback */ + if (!ah->ah_bwmode) { + __le16 raw_dur = ieee80211_generic_frame_duration(ah->hw, + NULL, band, len, rate); + + /* subtract difference between long and short preamble */ + dur = le16_to_cpu(raw_dur); + if (shortpre) + dur -= 96; + + return dur; + } + + bitrate = rate->bitrate; + preamble = AR5K_INIT_OFDM_PREAMPLE_TIME; + plcp_bits = AR5K_INIT_OFDM_PLCP_BITS; + sym_time = AR5K_INIT_OFDM_SYMBOL_TIME; + + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + sifs = AR5K_INIT_SIFS_TURBO; + preamble = AR5K_INIT_OFDM_PREAMBLE_TIME_MIN; + break; + case AR5K_BWMODE_10MHZ: + sifs = AR5K_INIT_SIFS_HALF_RATE; + preamble *= 2; + sym_time *= 2; + bitrate = DIV_ROUND_UP(bitrate, 2); + break; + case AR5K_BWMODE_5MHZ: + sifs = AR5K_INIT_SIFS_QUARTER_RATE; + preamble *= 4; + sym_time *= 4; + bitrate = DIV_ROUND_UP(bitrate, 4); + break; + default: + sifs = AR5K_INIT_SIFS_DEFAULT_BG; + break; + } + + bits = plcp_bits + (len << 3); + /* Bit rate is in 100Kbits */ + symbol_bits = bitrate * sym_time; + symbols = DIV_ROUND_UP(bits * 10, symbol_bits); + + dur = sifs + preamble + (sym_time * symbols); + + return dur; +} + +/** + * ath5k_hw_get_default_slottime() - Get the default slot time for current mode + * @ah: The &struct ath5k_hw + */ +unsigned int +ath5k_hw_get_default_slottime(struct ath5k_hw *ah) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; + unsigned int slot_time; + + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + slot_time = AR5K_INIT_SLOT_TIME_TURBO; + break; + case AR5K_BWMODE_10MHZ: + slot_time = AR5K_INIT_SLOT_TIME_HALF_RATE; + break; + case AR5K_BWMODE_5MHZ: + slot_time = AR5K_INIT_SLOT_TIME_QUARTER_RATE; + break; + case AR5K_BWMODE_DEFAULT: + default: + slot_time = AR5K_INIT_SLOT_TIME_DEFAULT; + if ((channel->hw_value == AR5K_MODE_11B) && !ah->ah_short_slot) + slot_time = AR5K_INIT_SLOT_TIME_B; + break; + } + + return slot_time; +} + +/** + * ath5k_hw_get_default_sifs() - Get the default SIFS for current mode + * @ah: The &struct ath5k_hw + */ +unsigned int +ath5k_hw_get_default_sifs(struct ath5k_hw *ah) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; + unsigned int sifs; + + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + sifs = AR5K_INIT_SIFS_TURBO; + break; + case AR5K_BWMODE_10MHZ: + sifs = AR5K_INIT_SIFS_HALF_RATE; + break; + case AR5K_BWMODE_5MHZ: + sifs = AR5K_INIT_SIFS_QUARTER_RATE; + break; + case AR5K_BWMODE_DEFAULT: + default: + sifs = AR5K_INIT_SIFS_DEFAULT_BG; + if (channel->band == NL80211_BAND_5GHZ) + sifs = AR5K_INIT_SIFS_DEFAULT_A; + break; + } + + return sifs; +} + +/** + * ath5k_hw_update_mib_counters() - Update MIB counters (mac layer statistics) + * @ah: The &struct ath5k_hw + * + * Reads MIB counters from PCU and updates sw statistics. Is called after a + * MIB interrupt, because one of these counters might have reached their maximum + * and triggered the MIB interrupt, to let us read and clear the counter. + * + * NOTE: Is called in interrupt context! + */ +void +ath5k_hw_update_mib_counters(struct ath5k_hw *ah) +{ + struct ath5k_statistics *stats = &ah->stats; + + /* Read-And-Clear */ + stats->ack_fail += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); + stats->rts_fail += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); + stats->rts_ok += ath5k_hw_reg_read(ah, AR5K_RTS_OK); + stats->fcs_error += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); + stats->beacons += ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); +} + + +/******************\ +* ACK/CTS Timeouts * +\******************/ + +/** + * ath5k_hw_write_rate_duration() - Fill rate code to duration table + * @ah: The &struct ath5k_hw + * + * Write the rate code to duration table upon hw reset. This is a helper for + * ath5k_hw_pcu_init(). It seems all this is doing is setting an ACK timeout on + * the hardware, based on current mode, for each rate. The rates which are + * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have + * different rate code so we write their value twice (one for long preamble + * and one for short). + * + * Note: Band doesn't matter here, if we set the values for OFDM it works + * on both a and g modes. So all we have to do is set values for all g rates + * that include all OFDM and CCK rates. + * + */ +static inline void +ath5k_hw_write_rate_duration(struct ath5k_hw *ah) +{ + struct ieee80211_rate *rate; + unsigned int i; + /* 802.11g covers both OFDM and CCK */ + u8 band = NL80211_BAND_2GHZ; + + /* Write rate duration table */ + for (i = 0; i < ah->sbands[band].n_bitrates; i++) { + u32 reg; + u16 tx_time; + + if (ah->ah_ack_bitrate_high) + rate = &ah->sbands[band].bitrates[ack_rates_high[i]]; + /* CCK -> 1Mb */ + else if (i < 4) + rate = &ah->sbands[band].bitrates[0]; + /* OFDM -> 6Mb */ + else + rate = &ah->sbands[band].bitrates[4]; + + /* Set ACK timeout */ + reg = AR5K_RATE_DUR(rate->hw_value); + + /* An ACK frame consists of 10 bytes. If you add the FCS, + * which ieee80211_generic_frame_duration() adds, + * its 14 bytes. Note we use the control rate and not the + * actual rate for this rate. See mac80211 tx.c + * ieee80211_duration() for a brief description of + * what rate we should choose to TX ACKs. */ + tx_time = ath5k_hw_get_frame_duration(ah, band, 10, + rate, false); + + ath5k_hw_reg_write(ah, tx_time, reg); + + if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) + continue; + + tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, true); + ath5k_hw_reg_write(ah, tx_time, + reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + } +} + +/** + * ath5k_hw_set_ack_timeout() - Set ACK timeout on PCU + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +static int +ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK)) + <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, + ath5k_hw_htoclock(ah, timeout)); + + return 0; +} + +/** + * ath5k_hw_set_cts_timeout() - Set CTS timeout on PCU + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +static int +ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS)) + <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, + ath5k_hw_htoclock(ah, timeout)); + + return 0; +} + + +/*******************\ +* RX filter Control * +\*******************/ + +/** + * ath5k_hw_set_lladdr() - Set station id + * @ah: The &struct ath5k_hw + * @mac: The card's mac address (array of octets) + * + * Set station id on hw using the provided mac address + */ +int +ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +{ + struct ath_common *common = ath5k_hw_common(ah); + u32 low_id, high_id; + u32 pcu_reg; + + /* Set new station ID */ + memcpy(common->macaddr, mac, ETH_ALEN); + + pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; + + low_id = get_unaligned_le32(mac); + high_id = get_unaligned_le16(mac + 4); + + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + return 0; +} + +/** + * ath5k_hw_set_bssid() - Set current BSSID on hw + * @ah: The &struct ath5k_hw + * + * Sets the current BSSID and BSSID mask we have from the + * common struct into the hardware + */ +void +ath5k_hw_set_bssid(struct ath5k_hw *ah) +{ + struct ath_common *common = ath5k_hw_common(ah); + u16 tim_offset = 0; + + /* + * Set BSSID mask on 5212 + */ + if (ah->ah_version == AR5K_AR5212) + ath_hw_setbssidmask(common); + + /* + * Set BSSID + */ + ath5k_hw_reg_write(ah, + get_unaligned_le32(common->curbssid), + AR5K_BSS_ID0); + ath5k_hw_reg_write(ah, + get_unaligned_le16(common->curbssid + 4) | + ((common->curaid & 0x3fff) << AR5K_BSS_ID1_AID_S), + AR5K_BSS_ID1); + + if (common->curaid == 0) { + ath5k_hw_disable_pspoll(ah); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, + tim_offset ? tim_offset + 4 : 0); + + ath5k_hw_enable_pspoll(ah, NULL, 0); +} + +/** + * ath5k_hw_set_bssid_mask() - Filter out bssids we listen + * @ah: The &struct ath5k_hw + * @mask: The BSSID mask to set (array of octets) + * + * BSSID masking is a method used by AR5212 and newer hardware to inform PCU + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode and AP mode with a single + * BSS every bit matters since we lock to only one BSS. In AP mode with + * multiple BSSes (virtual interfaces) not every bit matters because hw must + * accept frames for all BSSes and so we tweak some bits of our mac address + * in order to have multiple BSSes. + * + * For more information check out ../hw.c of the common ath module. + */ +void +ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +{ + struct ath_common *common = ath5k_hw_common(ah); + + /* Cache bssid mask so that we can restore it + * on reset */ + memcpy(common->bssidmask, mask, ETH_ALEN); + if (ah->ah_version == AR5K_AR5212) + ath_hw_setbssidmask(common); +} + +/** + * ath5k_hw_set_mcast_filter() - Set multicast filter + * @ah: The &struct ath5k_hw + * @filter0: Lower 32bits of muticast filter + * @filter1: Higher 16bits of multicast filter + */ +void +ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +{ + ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); + ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); +} + +/** + * ath5k_hw_get_rx_filter() - Get current rx filter + * @ah: The &struct ath5k_hw + * + * Returns the RX filter by reading rx filter and + * phy error filter registers. RX filter is used + * to set the allowed frame types that PCU will accept + * and pass to the driver. For a list of frame types + * check out reg.h. + */ +u32 +ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +{ + u32 data, filter = 0; + + filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); + + /*Radar detection for 5212*/ + if (ah->ah_version == AR5K_AR5212) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); + + if (data & AR5K_PHY_ERR_FIL_RADAR) + filter |= AR5K_RX_FILTER_RADARERR; + if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) + filter |= AR5K_RX_FILTER_PHYERR; + } + + return filter; +} + +/** + * ath5k_hw_set_rx_filter() - Set rx filter + * @ah: The &struct ath5k_hw + * @filter: RX filter mask (see reg.h) + * + * Sets RX filter register and also handles PHY error filter + * register on 5212 and newer chips so that we have proper PHY + * error reporting. + */ +void +ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +{ + u32 data = 0; + + /* Set PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + if (filter & AR5K_RX_FILTER_RADARERR) + data |= AR5K_PHY_ERR_FIL_RADAR; + if (filter & AR5K_RX_FILTER_PHYERR) + data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; + } + + /* + * The AR5210 uses promiscuous mode to detect radar activity + */ + if (ah->ah_version == AR5K_AR5210 && + (filter & AR5K_RX_FILTER_RADARERR)) { + filter &= ~AR5K_RX_FILTER_RADARERR; + filter |= AR5K_RX_FILTER_PROM; + } + + /*Zero length DMA (phy error reporting) */ + if (data) + AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + + /*Write RX Filter register*/ + ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); + + /*Write PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); + +} + + +/****************\ +* Beacon control * +\****************/ + +#define ATH5K_MAX_TSF_READ 10 + +/** + * ath5k_hw_get_tsf64() - Get the full 64bit TSF + * @ah: The &struct ath5k_hw + * + * Returns the current TSF + */ +u64 +ath5k_hw_get_tsf64(struct ath5k_hw *ah) +{ + u32 tsf_lower, tsf_upper1, tsf_upper2; + int i; + unsigned long flags; + + /* This code is time critical - we don't want to be interrupted here */ + local_irq_save(flags); + + /* + * While reading TSF upper and then lower part, the clock is still + * counting (or jumping in case of IBSS merge) so we might get + * inconsistent values. To avoid this, we read the upper part again + * and check it has not been changed. We make the hypothesis that a + * maximum of 3 changes can happens in a row (we use 10 as a safe + * value). + * + * Impact on performance is pretty small, since in most cases, only + * 3 register reads are needed. + */ + + tsf_upper1 = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + for (i = 0; i < ATH5K_MAX_TSF_READ; i++) { + tsf_lower = ath5k_hw_reg_read(ah, AR5K_TSF_L32); + tsf_upper2 = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + if (tsf_upper2 == tsf_upper1) + break; + tsf_upper1 = tsf_upper2; + } + + local_irq_restore(flags); + + WARN_ON(i == ATH5K_MAX_TSF_READ); + + return ((u64)tsf_upper1 << 32) | tsf_lower; +} + +#undef ATH5K_MAX_TSF_READ + +/** + * ath5k_hw_set_tsf64() - Set a new 64bit TSF + * @ah: The &struct ath5k_hw + * @tsf64: The new 64bit TSF + * + * Sets the new TSF + */ +void +ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64) +{ + ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32); + ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32); +} + +/** + * ath5k_hw_reset_tsf() - Force a TSF reset + * @ah: The &struct ath5k_hw + * + * Forces a TSF reset on PCU + */ +void +ath5k_hw_reset_tsf(struct ath5k_hw *ah) +{ + u32 val; + + val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF; + + /* + * Each write to the RESET_TSF bit toggles a hardware internal + * signal to reset TSF, but if left high it will cause a TSF reset + * on the next chip reset as well. Thus we always write the value + * twice to clear the signal. + */ + ath5k_hw_reg_write(ah, val, AR5K_BEACON); + ath5k_hw_reg_write(ah, val, AR5K_BEACON); +} + +/** + * ath5k_hw_init_beacon_timers() - Initialize beacon timers + * @ah: The &struct ath5k_hw + * @next_beacon: Next TBTT + * @interval: Current beacon interval + * + * This function is used to initialize beacon timers based on current + * operation mode and settings. + */ +void +ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, u32 interval) +{ + u32 timer1, timer2, timer3; + + /* + * Set the additional timers by mode + */ + switch (ah->opmode) { + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_STATION: + /* In STA mode timer1 is used as next wakeup + * timer and timer2 as next CFP duration start + * timer. Both in 1/8TUs. */ + /* TODO: PCF handling */ + if (ah->ah_version == AR5K_AR5210) { + timer1 = 0xffffffff; + timer2 = 0xffffffff; + } else { + timer1 = 0x0000ffff; + timer2 = 0x0007ffff; + } + /* Mark associated AP as PCF incapable for now */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PCF); + break; + case NL80211_IFTYPE_ADHOC: + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_ADHOC_BCN_ATIM); + fallthrough; + default: + /* On non-STA modes timer1 is used as next DMA + * beacon alert (DBA) timer and timer2 as next + * software beacon alert. Both in 1/8TUs. */ + timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; + timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; + break; + } + + /* Timer3 marks the end of our ATIM window + * a zero length window is not allowed because + * we 'll get no beacons */ + timer3 = next_beacon + 1; + + /* + * Set the beacon register and enable all timers. + */ + /* When in AP or Mesh Point mode zero timer0 to start TSF */ + if (ah->opmode == NL80211_IFTYPE_AP || + ah->opmode == NL80211_IFTYPE_MESH_POINT) + ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); + + ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); + ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); + ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); + ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); + + /* Force a TSF reset if requested and enable beacons */ + if (interval & AR5K_BEACON_RESET_TSF) + ath5k_hw_reset_tsf(ah); + + ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | + AR5K_BEACON_ENABLE), + AR5K_BEACON); + + /* Flush any pending BMISS interrupts on ISR by + * performing a clear-on-write operation on PISR + * register for the BMISS bit (writing a bit on + * ISR toggles a reset for that bit and leaves + * the remaining bits intact) */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR); + else + ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR); + + /* TODO: Set enhanced sleep registers on AR5212 + * based on vif->bss_conf params, until then + * disable power save reporting.*/ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV); + +} + +/** + * ath5k_check_timer_win() - Check if timer B is timer A + window + * @a: timer a (before b) + * @b: timer b (after a) + * @window: difference between a and b + * @intval: timers are increased by this interval + * + * This helper function checks if timer B is timer A + window and covers + * cases where timer A or B might have already been updated or wrapped + * around (Timers are 16 bit). + * + * Returns true if O.K. + */ +static inline bool +ath5k_check_timer_win(int a, int b, int window, int intval) +{ + /* + * 1.) usually B should be A + window + * 2.) A already updated, B not updated yet + * 3.) A already updated and has wrapped around + * 4.) B has wrapped around + */ + if ((b - a == window) || /* 1.) */ + (a - b == intval - window) || /* 2.) */ + ((a | 0x10000) - b == intval - window) || /* 3.) */ + ((b | 0x10000) - a == window)) /* 4.) */ + return true; /* O.K. */ + return false; +} + +/** + * ath5k_hw_check_beacon_timers() - Check if the beacon timers are correct + * @ah: The &struct ath5k_hw + * @intval: beacon interval + * + * This is a workaround for IBSS mode + * + * The need for this function arises from the fact that we have 4 separate + * HW timer registers (TIMER0 - TIMER3), which are closely related to the + * next beacon target time (NBTT), and that the HW updates these timers + * separately based on the current TSF value. The hardware increments each + * timer by the beacon interval, when the local TSF converted to TU is equal + * to the value stored in the timer. + * + * The reception of a beacon with the same BSSID can update the local HW TSF + * at any time - this is something we can't avoid. If the TSF jumps to a + * time which is later than the time stored in a timer, this timer will not + * be updated until the TSF in TU wraps around at 16 bit (the size of the + * timers) and reaches the time which is stored in the timer. + * + * The problem is that these timers are closely related to TIMER0 (NBTT) and + * that they define a time "window". When the TSF jumps between two timers + * (e.g. ATIM and NBTT), the one in the past will be left behind (not + * updated), while the one in the future will be updated every beacon + * interval. This causes the window to get larger, until the TSF wraps + * around as described above and the timer which was left behind gets + * updated again. But - because the beacon interval is usually not an exact + * divisor of the size of the timers (16 bit), an unwanted "window" between + * these timers has developed! + * + * This is especially important with the ATIM window, because during + * the ATIM window only ATIM frames and no data frames are allowed to be + * sent, which creates transmission pauses after each beacon. This symptom + * has been described as "ramping ping" because ping times increase linearly + * for some time and then drop down again. A wrong window on the DMA beacon + * timer has the same effect, so we check for these two conditions. + * + * Returns true if O.K. + */ +bool +ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval) +{ + unsigned int nbtt, atim, dma; + + nbtt = ath5k_hw_reg_read(ah, AR5K_TIMER0); + atim = ath5k_hw_reg_read(ah, AR5K_TIMER3); + dma = ath5k_hw_reg_read(ah, AR5K_TIMER1) >> 3; + + /* NOTE: SWBA is different. Having a wrong window there does not + * stop us from sending data and this condition is caught by + * other means (SWBA interrupt) */ + + if (ath5k_check_timer_win(nbtt, atim, 1, intval) && + ath5k_check_timer_win(dma, nbtt, AR5K_TUNE_DMA_BEACON_RESP, + intval)) + return true; /* O.K. */ + return false; +} + +/** + * ath5k_hw_set_coverage_class() - Set IEEE 802.11 coverage class + * @ah: The &struct ath5k_hw + * @coverage_class: IEEE 802.11 coverage class number + * + * Sets IFS intervals and ACK/CTS timeouts for given coverage class. + */ +void +ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) +{ + /* As defined by IEEE 802.11-2007 17.3.8.6 */ + int slot_time = ath5k_hw_get_default_slottime(ah) + 3 * coverage_class; + int ack_timeout = ath5k_hw_get_default_sifs(ah) + slot_time; + int cts_timeout = ack_timeout; + + ath5k_hw_set_ifs_intervals(ah, slot_time); + ath5k_hw_set_ack_timeout(ah, ack_timeout); + ath5k_hw_set_cts_timeout(ah, cts_timeout); + + ah->ah_coverage_class = coverage_class; +} + +/***************************\ +* Init/Start/Stop functions * +\***************************/ + +/** + * ath5k_hw_start_rx_pcu() - Start RX engine + * @ah: The &struct ath5k_hw + * + * Starts RX engine on PCU so that hw can process RXed frames + * (ACK etc). + * + * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma + */ +void +ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +{ + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * ath5k_hw_stop_rx_pcu() - Stop RX engine + * @ah: The &struct ath5k_hw + * + * Stops RX engine on PCU + */ +void +ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +{ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * ath5k_hw_set_opmode() - Set PCU operating mode + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * + * Configure PCU for the various operating modes (AP/STA etc) + */ +int +ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) +{ + struct ath_common *common = ath5k_hw_common(ah); + u32 pcu_reg, beacon_reg, low_id, high_id; + + ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "mode %d\n", op_mode); + + /* Preserve rest settings */ + pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; + pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP + | AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0)); + + beacon_reg = 0; + + switch (op_mode) { + case NL80211_IFTYPE_ADHOC: + pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE; + beacon_reg |= AR5K_BCR_ADHOC; + if (ah->ah_version == AR5K_AR5210) + pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; + else + AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); + break; + + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE; + beacon_reg |= AR5K_BCR_AP; + if (ah->ah_version == AR5K_AR5210) + pcu_reg |= AR5K_STA_ID1_NO_PSPOLL; + else + AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS); + break; + + case NL80211_IFTYPE_STATION: + pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_PWR_SV : 0); + fallthrough; + case NL80211_IFTYPE_MONITOR: + pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + break; + + default: + return -EINVAL; + } + + /* + * Set PCU registers + */ + low_id = get_unaligned_le32(common->macaddr); + high_id = get_unaligned_le16(common->macaddr + 4); + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + /* + * Set Beacon Control Register on 5210 + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + + return 0; +} + +/** + * ath5k_hw_pcu_init() - Initialize PCU + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * + * This function is used to initialize PCU by setting current + * operation mode and various other settings. + */ +void +ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode) +{ + /* Set bssid and bssid mask */ + ath5k_hw_set_bssid(ah); + + /* Set PCU config */ + ath5k_hw_set_opmode(ah, op_mode); + + /* Write rate duration table only on AR5212 and if + * virtual interface has already been brought up + * XXX: rethink this after new mode changes to + * mac80211 are integrated */ + if (ah->ah_version == AR5K_AR5212 && + ah->nvifs) + ath5k_hw_write_rate_duration(ah); + + /* Set RSSI/BRSSI thresholds + * + * Note: If we decide to set this value + * dynamically, have in mind that when AR5K_RSSI_THR + * register is read it might return 0x40 if we haven't + * wrote anything to it plus BMISS RSSI threshold is zeroed. + * So doing a save/restore procedure here isn't the right + * choice. Instead store it on ath5k_hw */ + ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES | + AR5K_TUNE_BMISS_THRES << + AR5K_RSSI_THR_BMISS_S), + AR5K_RSSI_THR); + + /* MIC QoS support */ + if (ah->ah_mac_srev >= AR5K_SREV_AR2413) { + ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL); + ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL); + } + + /* QoS NOACK Policy */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, + AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) | + AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) | + AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET), + AR5K_QOS_NOACK); + } + + /* Restore slot time and ACK timeouts */ + if (ah->ah_coverage_class > 0) + ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class); + + /* Set ACK bitrate mode (see ack_rates_high) */ + if (ah->ah_version == AR5K_AR5212) { + u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; + if (ah->ah_ack_bitrate_high) + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); + } + return; +} diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c new file mode 100644 index 000000000..5797ef9c7 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -0,0 +1,3961 @@ +/* + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/***********************\ +* PHY related functions * +\***********************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/slab.h> +#include <asm/unaligned.h> + +#include "ath5k.h" +#include "reg.h" +#include "rfbuffer.h" +#include "rfgain.h" +#include "../regd.h" + + +/** + * DOC: PHY related functions + * + * Here we handle the low-level functions related to baseband + * and analog frontend (RF) parts. This is by far the most complex + * part of the hw code so make sure you know what you are doing. + * + * Here is a list of what this is all about: + * + * - Channel setting/switching + * + * - Automatic Gain Control (AGC) calibration + * + * - Noise Floor calibration + * + * - I/Q imbalance calibration (QAM correction) + * + * - Calibration due to thermal changes (gain_F) + * + * - Spur noise mitigation + * + * - RF/PHY initialization for the various operating modes and bwmodes + * + * - Antenna control + * + * - TX power control per channel/rate/packet type + * + * Also have in mind we never got documentation for most of these + * functions, what we have comes mostly from Atheros's code, reverse + * engineering and patent docs/presentations etc. + */ + + +/******************\ +* Helper functions * +\******************/ + +/** + * ath5k_hw_radio_revision() - Get the PHY Chip revision + * @ah: The &struct ath5k_hw + * @band: One of enum nl80211_band + * + * Returns the revision number of a 2GHz, 5GHz or single chip + * radio. + */ +u16 +ath5k_hw_radio_revision(struct ath5k_hw *ah, enum nl80211_band band) +{ + unsigned int i; + u32 srev; + u16 ret; + + /* + * Set the radio chip access register + */ + switch (band) { + case NL80211_BAND_2GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0)); + break; + case NL80211_BAND_5GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + break; + default: + return 0; + } + + usleep_range(2000, 2500); + + /* ...wait until PHY is ready and read the selected radio revision */ + ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34)); + + for (i = 0; i < 8; i++) + ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); + + if (ah->ah_version == AR5K_AR5210) { + srev = (ath5k_hw_reg_read(ah, AR5K_PHY(256)) >> 28) & 0xf; + ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; + } else { + srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; + ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) | + ((srev & 0x0f) << 4), 8); + } + + /* Reset to the 5GHz mode */ + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + + return ret; +} + +/** + * ath5k_channel_ok() - Check if a channel is supported by the hw + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Note: We don't do any regulatory domain checks here, it's just + * a sanity check. + */ +bool +ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel) +{ + u16 freq = channel->center_freq; + + /* Check if the channel is in our supported range */ + if (channel->band == NL80211_BAND_2GHZ) { + if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_2ghz_max)) + return true; + } else if (channel->band == NL80211_BAND_5GHZ) + if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_5ghz_max)) + return true; + + return false; +} + +/** + * ath5k_hw_chan_has_spur_noise() - Check if channel is sensitive to spur noise + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + */ +bool +ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u8 refclk_freq; + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + refclk_freq = 40; + else + refclk_freq = 32; + + if ((channel->center_freq % refclk_freq != 0) && + ((channel->center_freq % refclk_freq < 10) || + (channel->center_freq % refclk_freq > 22))) + return true; + else + return false; +} + +/** + * ath5k_hw_rfb_op() - Perform an operation on the given RF Buffer + * @ah: The &struct ath5k_hw + * @rf_regs: The struct ath5k_rf_reg + * @val: New value + * @reg_id: RF register ID + * @set: Indicate we need to swap data + * + * This is an internal function used to modify RF Banks before + * writing them to AR5K_RF_BUFFER. Check out rfbuffer.h for more + * infos. + */ +static unsigned int +ath5k_hw_rfb_op(struct ath5k_hw *ah, const struct ath5k_rf_reg *rf_regs, + u32 val, u8 reg_id, bool set) +{ + const struct ath5k_rf_reg *rfreg = NULL; + u8 offset, bank, num_bits, col, position; + u16 entry; + u32 mask, data, last_bit, bits_shifted, first_bit; + u32 *rfb; + s32 bits_left; + int i; + + data = 0; + rfb = ah->ah_rf_banks; + + for (i = 0; i < ah->ah_rf_regs_count; i++) { + if (rf_regs[i].index == reg_id) { + rfreg = &rf_regs[i]; + break; + } + } + + if (rfb == NULL || rfreg == NULL) { + ATH5K_PRINTF("Rf register not found!\n"); + /* should not happen */ + return 0; + } + + bank = rfreg->bank; + num_bits = rfreg->field.len; + first_bit = rfreg->field.pos; + col = rfreg->field.col; + + /* first_bit is an offset from bank's + * start. Since we have all banks on + * the same array, we use this offset + * to mark each bank's start */ + offset = ah->ah_offset[bank]; + + /* Boundary check */ + if (!(col <= 3 && num_bits <= 32 && first_bit + num_bits <= 319)) { + ATH5K_PRINTF("invalid values at offset %u\n", offset); + return 0; + } + + entry = ((first_bit - 1) / 8) + offset; + position = (first_bit - 1) % 8; + + if (set) + data = ath5k_hw_bitswap(val, num_bits); + + for (bits_shifted = 0, bits_left = num_bits; bits_left > 0; + position = 0, entry++) { + + last_bit = (position + bits_left > 8) ? 8 : + position + bits_left; + + mask = (((1 << last_bit) - 1) ^ ((1 << position) - 1)) << + (col * 8); + + if (set) { + rfb[entry] &= ~mask; + rfb[entry] |= ((data << position) << (col * 8)) & mask; + data >>= (8 - position); + } else { + data |= (((rfb[entry] & mask) >> (col * 8)) >> position) + << bits_shifted; + bits_shifted += last_bit - position; + } + + bits_left -= 8 - position; + } + + data = set ? 1 : ath5k_hw_bitswap(data, num_bits); + + return data; +} + +/** + * ath5k_hw_write_ofdm_timings() - set OFDM timings on AR5212 + * @ah: the &struct ath5k_hw + * @channel: the currently set channel upon reset + * + * Write the delta slope coefficient (used on pilot tracking ?) for OFDM + * operation on the AR5212 upon reset. This is a helper for ath5k_hw_phy_init. + * + * Since delta slope is floating point we split it on its exponent and + * mantissa and provide these values on hw. + * + * For more infos i think this patent is related + * "http://www.freepatentsonline.com/7184495.html" + */ +static inline int +ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* Get exponent and mantissa and set it */ + u32 coef_scaled, coef_exp, coef_man, + ds_coef_exp, ds_coef_man, clock; + + BUG_ON(!(ah->ah_version == AR5K_AR5212) || + (channel->hw_value == AR5K_MODE_11B)); + + /* Get coefficient + * ALGO: coef = (5 * clock / carrier_freq) / 2 + * we scale coef by shifting clock value by 24 for + * better precision since we use integers */ + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + clock = 40 * 2; + break; + case AR5K_BWMODE_10MHZ: + clock = 40 / 2; + break; + case AR5K_BWMODE_5MHZ: + clock = 40 / 4; + break; + default: + clock = 40; + break; + } + coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq; + + /* Get exponent + * ALGO: coef_exp = 14 - highest set bit position */ + coef_exp = ilog2(coef_scaled); + + /* Doesn't make sense if it's zero*/ + if (!coef_scaled || !coef_exp) + return -EINVAL; + + /* Note: we've shifted coef_scaled by 24 */ + coef_exp = 14 - (coef_exp - 24); + + + /* Get mantissa (significant digits) + * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */ + coef_man = coef_scaled + + (1 << (24 - coef_exp - 1)); + + /* Calculate delta slope coefficient exponent + * and mantissa (remove scaling) and set them on hw */ + ds_coef_man = coef_man >> (24 - coef_exp); + ds_coef_exp = coef_exp - 16; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + + return 0; +} + +/** + * ath5k_hw_phy_disable() - Disable PHY + * @ah: The &struct ath5k_hw + */ +int ath5k_hw_phy_disable(struct ath5k_hw *ah) +{ + /*Just a try M.F.*/ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + + return 0; +} + +/** + * ath5k_hw_wait_for_synth() - Wait for synth to settle + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + */ +static void +ath5k_hw_wait_for_synth(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* + * On 5211+ read activation -> rx delay + * and use it (100ns steps). + */ + if (ah->ah_version != AR5K_AR5210) { + u32 delay; + delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + delay = (channel->hw_value == AR5K_MODE_11B) ? + ((delay << 2) / 22) : (delay / 10); + if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) + delay = delay << 1; + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) + delay = delay << 2; + /* XXX: /2 on turbo ? Let's be safe + * for now */ + usleep_range(100 + delay, 100 + (2 * delay)); + } else { + usleep_range(1000, 1500); + } +} + + +/**********************\ +* RF Gain optimization * +\**********************/ + +/** + * DOC: RF Gain optimization + * + * This code is used to optimize RF gain on different environments + * (temperature mostly) based on feedback from a power detector. + * + * It's only used on RF5111 and RF5112, later RF chips seem to have + * auto adjustment on hw -notice they have a much smaller BANK 7 and + * no gain optimization ladder-. + * + * For more infos check out this patent doc + * "http://www.freepatentsonline.com/7400691.html" + * + * This paper describes power drops as seen on the receiver due to + * probe packets + * "http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues + * %20of%20Power%20Control.pdf" + * + * And this is the MadWiFi bug entry related to the above + * "http://madwifi-project.org/ticket/1659" + * with various measurements and diagrams + */ + +/** + * ath5k_hw_rfgain_opt_init() - Initialize ah_gain during attach + * @ah: The &struct ath5k_hw + */ +int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) +{ + /* Initialize the gain optimization values */ + switch (ah->ah_radio) { + case AR5K_RF5111: + ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default; + ah->ah_gain.g_low = 20; + ah->ah_gain.g_high = 35; + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + break; + case AR5K_RF5112: + ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default; + ah->ah_gain.g_low = 20; + ah->ah_gain.g_high = 85; + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + break; + default: + return -EINVAL; + } + + return 0; +} + +/** + * ath5k_hw_request_rfgain_probe() - Request a PAPD probe packet + * @ah: The &struct ath5k_hw + * + * Schedules a gain probe check on the next transmitted packet. + * That means our next packet is going to be sent with lower + * tx power and a Peak to Average Power Detector (PAPD) will try + * to measure the gain. + * + * TODO: Force a tx packet (bypassing PCU arbitrator etc) + * just after we enable the probe so that we don't mess with + * standard traffic. + */ +static void +ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) +{ + + /* Skip if gain calibration is inactive or + * we already handle a probe request */ + if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE) + return; + + /* Send the packet with 2dB below max power as + * patent doc suggest */ + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_ofdm - 4, + AR5K_PHY_PAPD_PROBE_TXPOWER) | + AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); + + ah->ah_gain.g_state = AR5K_RFGAIN_READ_REQUESTED; + +} + +/** + * ath5k_hw_rf_gainf_corr() - Calculate Gain_F measurement correction + * @ah: The &struct ath5k_hw + * + * Calculate Gain_F measurement correction + * based on the current step for RF5112 rev. 2 + */ +static u32 +ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah) +{ + u32 mix, step; + const struct ath5k_gain_opt *go; + const struct ath5k_gain_opt_step *g_step; + const struct ath5k_rf_reg *rf_regs; + + /* Only RF5112 Rev. 2 supports it */ + if ((ah->ah_radio != AR5K_RF5112) || + (ah->ah_radio_5ghz_revision <= AR5K_SREV_RAD_5112A)) + return 0; + + go = &rfgain_opt_5112; + rf_regs = rf_regs_5112a; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a); + + g_step = &go->go_step[ah->ah_gain.g_step_idx]; + + if (ah->ah_rf_banks == NULL) + return 0; + + ah->ah_gain.g_f_corr = 0; + + /* No VGA (Variable Gain Amplifier) override, skip */ + if (ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR, false) != 1) + return 0; + + /* Mix gain stepping */ + step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXGAIN_STEP, false); + + /* Mix gain override */ + mix = g_step->gos_param[0]; + + switch (mix) { + case 3: + ah->ah_gain.g_f_corr = step * 2; + break; + case 2: + ah->ah_gain.g_f_corr = (step - 5) * 2; + break; + case 1: + ah->ah_gain.g_f_corr = step; + break; + default: + ah->ah_gain.g_f_corr = 0; + break; + } + + return ah->ah_gain.g_f_corr; +} + +/** + * ath5k_hw_rf_check_gainf_readback() - Validate Gain_F feedback from detector + * @ah: The &struct ath5k_hw + * + * Check if current gain_F measurement is in the range of our + * power detector windows. If we get a measurement outside range + * we know it's not accurate (detectors can't measure anything outside + * their detection window) so we must ignore it. + * + * Returns true if readback was O.K. or false on failure + */ +static bool +ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) +{ + const struct ath5k_rf_reg *rf_regs; + u32 step, mix_ovr, level[4]; + + if (ah->ah_rf_banks == NULL) + return false; + + if (ah->ah_radio == AR5K_RF5111) { + + rf_regs = rf_regs_5111; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111); + + step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_RFGAIN_STEP, + false); + + level[0] = 0; + level[1] = (step == 63) ? 50 : step + 4; + level[2] = (step != 63) ? 64 : level[0]; + level[3] = level[2] + 50; + + ah->ah_gain.g_high = level[3] - + (step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5); + ah->ah_gain.g_low = level[0] + + (step == 63 ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0); + } else { + + rf_regs = rf_regs_5112; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112); + + mix_ovr = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR, + false); + + level[0] = level[2] = 0; + + if (mix_ovr == 1) { + level[1] = level[3] = 83; + } else { + level[1] = level[3] = 107; + ah->ah_gain.g_high = 55; + } + } + + return (ah->ah_gain.g_current >= level[0] && + ah->ah_gain.g_current <= level[1]) || + (ah->ah_gain.g_current >= level[2] && + ah->ah_gain.g_current <= level[3]); +} + +/** + * ath5k_hw_rf_gainf_adjust() - Perform Gain_F adjustment + * @ah: The &struct ath5k_hw + * + * Choose the right target gain based on current gain + * and RF gain optimization ladder + */ +static s8 +ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) +{ + const struct ath5k_gain_opt *go; + const struct ath5k_gain_opt_step *g_step; + int ret = 0; + + switch (ah->ah_radio) { + case AR5K_RF5111: + go = &rfgain_opt_5111; + break; + case AR5K_RF5112: + go = &rfgain_opt_5112; + break; + default: + return 0; + } + + g_step = &go->go_step[ah->ah_gain.g_step_idx]; + + if (ah->ah_gain.g_current >= ah->ah_gain.g_high) { + + /* Reached maximum */ + if (ah->ah_gain.g_step_idx == 0) + return -1; + + for (ah->ah_gain.g_target = ah->ah_gain.g_current; + ah->ah_gain.g_target >= ah->ah_gain.g_high && + ah->ah_gain.g_step_idx > 0; + g_step = &go->go_step[ah->ah_gain.g_step_idx]) + ah->ah_gain.g_target -= 2 * + (go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain - + g_step->gos_gain); + + ret = 1; + goto done; + } + + if (ah->ah_gain.g_current <= ah->ah_gain.g_low) { + + /* Reached minimum */ + if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1)) + return -2; + + for (ah->ah_gain.g_target = ah->ah_gain.g_current; + ah->ah_gain.g_target <= ah->ah_gain.g_low && + ah->ah_gain.g_step_idx < go->go_steps_count - 1; + g_step = &go->go_step[ah->ah_gain.g_step_idx]) + ah->ah_gain.g_target -= 2 * + (go->go_step[++ah->ah_gain.g_step_idx].gos_gain - + g_step->gos_gain); + + ret = 2; + goto done; + } + +done: + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, + "ret %d, gain step %u, current gain %u, target gain %u\n", + ret, ah->ah_gain.g_step_idx, ah->ah_gain.g_current, + ah->ah_gain.g_target); + + return ret; +} + +/** + * ath5k_hw_gainf_calibrate() - Do a gain_F calibration + * @ah: The &struct ath5k_hw + * + * Main callback for thermal RF gain calibration engine + * Check for a new gain reading and schedule an adjustment + * if needed. + * + * Returns one of enum ath5k_rfgain codes + */ +enum ath5k_rfgain +ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) +{ + u32 data, type; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + + if (ah->ah_rf_banks == NULL || + ah->ah_gain.g_state == AR5K_RFGAIN_INACTIVE) + return AR5K_RFGAIN_INACTIVE; + + /* No check requested, either engine is inactive + * or an adjustment is already requested */ + if (ah->ah_gain.g_state != AR5K_RFGAIN_READ_REQUESTED) + goto done; + + /* Read the PAPD (Peak to Average Power Detector) + * register */ + data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE); + + /* No probe is scheduled, read gain_F measurement */ + if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) { + ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S; + type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE); + + /* If tx packet is CCK correct the gain_F measurement + * by cck ofdm gain delta */ + if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) { + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) + ah->ah_gain.g_current += + ee->ee_cck_ofdm_gain_delta; + else + ah->ah_gain.g_current += + AR5K_GAIN_CCK_PROBE_CORR; + } + + /* Further correct gain_F measurement for + * RF5112A radios */ + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) { + ath5k_hw_rf_gainf_corr(ah); + ah->ah_gain.g_current = + ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ? + (ah->ah_gain.g_current - ah->ah_gain.g_f_corr) : + 0; + } + + /* Check if measurement is ok and if we need + * to adjust gain, schedule a gain adjustment, + * else switch back to the active state */ + if (ath5k_hw_rf_check_gainf_readback(ah) && + AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) && + ath5k_hw_rf_gainf_adjust(ah)) { + ah->ah_gain.g_state = AR5K_RFGAIN_NEED_CHANGE; + } else { + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + } + } + +done: + return ah->ah_gain.g_state; +} + +/** + * ath5k_hw_rfgain_init() - Write initial RF gain settings to hw + * @ah: The &struct ath5k_hw + * @band: One of enum nl80211_band + * + * Write initial RF gain table to set the RF sensitivity. + * + * NOTE: This one works on all RF chips and has nothing to do + * with Gain_F calibration + */ +static int +ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum nl80211_band band) +{ + const struct ath5k_ini_rfgain *ath5k_rfg; + unsigned int i, size, index; + + switch (ah->ah_radio) { + case AR5K_RF5111: + ath5k_rfg = rfgain_5111; + size = ARRAY_SIZE(rfgain_5111); + break; + case AR5K_RF5112: + ath5k_rfg = rfgain_5112; + size = ARRAY_SIZE(rfgain_5112); + break; + case AR5K_RF2413: + ath5k_rfg = rfgain_2413; + size = ARRAY_SIZE(rfgain_2413); + break; + case AR5K_RF2316: + ath5k_rfg = rfgain_2316; + size = ARRAY_SIZE(rfgain_2316); + break; + case AR5K_RF5413: + ath5k_rfg = rfgain_5413; + size = ARRAY_SIZE(rfgain_5413); + break; + case AR5K_RF2317: + case AR5K_RF2425: + ath5k_rfg = rfgain_2425; + size = ARRAY_SIZE(rfgain_2425); + break; + default: + return -EINVAL; + } + + index = (band == NL80211_BAND_2GHZ) ? 1 : 0; + + for (i = 0; i < size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[index], + (u32)ath5k_rfg[i].rfg_register); + } + + return 0; +} + + +/********************\ +* RF Registers setup * +\********************/ + +/** + * ath5k_hw_rfregs_init() - Initialize RF register settings + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @mode: One of enum ath5k_driver_mode + * + * Setup RF registers by writing RF buffer on hw. For + * more infos on this, check out rfbuffer.h + */ +static int +ath5k_hw_rfregs_init(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + unsigned int mode) +{ + const struct ath5k_rf_reg *rf_regs; + const struct ath5k_ini_rfbuffer *ini_rfb; + const struct ath5k_gain_opt *go = NULL; + const struct ath5k_gain_opt_step *g_step; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u8 ee_mode = 0; + u32 *rfb; + int i, obdb = -1, bank = -1; + + switch (ah->ah_radio) { + case AR5K_RF5111: + rf_regs = rf_regs_5111; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111); + ini_rfb = rfb_5111; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5111); + go = &rfgain_opt_5111; + break; + case AR5K_RF5112: + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) { + rf_regs = rf_regs_5112a; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a); + ini_rfb = rfb_5112a; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112a); + } else { + rf_regs = rf_regs_5112; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112); + ini_rfb = rfb_5112; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112); + } + go = &rfgain_opt_5112; + break; + case AR5K_RF2413: + rf_regs = rf_regs_2413; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2413); + ini_rfb = rfb_2413; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2413); + break; + case AR5K_RF2316: + rf_regs = rf_regs_2316; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2316); + ini_rfb = rfb_2316; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2316); + break; + case AR5K_RF5413: + rf_regs = rf_regs_5413; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5413); + ini_rfb = rfb_5413; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5413); + break; + case AR5K_RF2317: + rf_regs = rf_regs_2425; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425); + ini_rfb = rfb_2317; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2317); + break; + case AR5K_RF2425: + rf_regs = rf_regs_2425; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425); + if (ah->ah_mac_srev < AR5K_SREV_AR2417) { + ini_rfb = rfb_2425; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2425); + } else { + ini_rfb = rfb_2417; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2417); + } + break; + default: + return -EINVAL; + } + + /* If it's the first time we set RF buffer, allocate + * ah->ah_rf_banks based on ah->ah_rf_banks_size + * we set above */ + if (ah->ah_rf_banks == NULL) { + ah->ah_rf_banks = kmalloc_array(ah->ah_rf_banks_size, + sizeof(u32), + GFP_KERNEL); + if (ah->ah_rf_banks == NULL) { + ATH5K_ERR(ah, "out of memory\n"); + return -ENOMEM; + } + } + + /* Copy values to modify them */ + rfb = ah->ah_rf_banks; + + for (i = 0; i < ah->ah_rf_banks_size; i++) { + if (ini_rfb[i].rfb_bank >= AR5K_MAX_RF_BANKS) { + ATH5K_ERR(ah, "invalid bank\n"); + return -EINVAL; + } + + /* Bank changed, write down the offset */ + if (bank != ini_rfb[i].rfb_bank) { + bank = ini_rfb[i].rfb_bank; + ah->ah_offset[bank] = i; + } + + rfb[i] = ini_rfb[i].rfb_mode_data[mode]; + } + + /* Set Output and Driver bias current (OB/DB) */ + if (channel->band == NL80211_BAND_2GHZ) { + + if (channel->hw_value == AR5K_MODE_11B) + ee_mode = AR5K_EEPROM_MODE_11B; + else + ee_mode = AR5K_EEPROM_MODE_11G; + + /* For RF511X/RF211X combination we + * use b_OB and b_DB parameters stored + * in eeprom on ee->ee_ob[ee_mode][0] + * + * For all other chips we use OB/DB for 2GHz + * stored in the b/g modal section just like + * 802.11a on ee->ee_ob[ee_mode][1] */ + if ((ah->ah_radio == AR5K_RF5111) || + (ah->ah_radio == AR5K_RF5112)) + obdb = 0; + else + obdb = 1; + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb], + AR5K_RF_OB_2GHZ, true); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb], + AR5K_RF_DB_2GHZ, true); + + /* RF5111 always needs OB/DB for 5GHz, even if we use 2GHz */ + } else if ((channel->band == NL80211_BAND_5GHZ) || + (ah->ah_radio == AR5K_RF5111)) { + + /* For 11a, Turbo and XR we need to choose + * OB/DB based on frequency range */ + ee_mode = AR5K_EEPROM_MODE_11A; + obdb = channel->center_freq >= 5725 ? 3 : + (channel->center_freq >= 5500 ? 2 : + (channel->center_freq >= 5260 ? 1 : + (channel->center_freq > 4000 ? 0 : -1))); + + if (obdb < 0) + return -EINVAL; + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb], + AR5K_RF_OB_5GHZ, true); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb], + AR5K_RF_DB_5GHZ, true); + } + + g_step = &go->go_step[ah->ah_gain.g_step_idx]; + + /* Set turbo mode (N/A on RF5413) */ + if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) && + (ah->ah_radio != AR5K_RF5413)) + ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_TURBO, false); + + /* Bank Modifications (chip-specific) */ + if (ah->ah_radio == AR5K_RF5111) { + + /* Set gain_F settings according to current step */ + if (channel->hw_value != AR5K_MODE_11B) { + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, + AR5K_PHY_FRAME_CTL_TX_CLIP, + g_step->gos_param[0]); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1], + AR5K_RF_PWD_90, true); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2], + AR5K_RF_PWD_84, true); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3], + AR5K_RF_RFGAIN_SEL, true); + + /* We programmed gain_F parameters, switch back + * to active state */ + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + + } + + /* Bank 6/7 setup */ + + ath5k_hw_rfb_op(ah, rf_regs, !ee->ee_xpd[ee_mode], + AR5K_RF_PWD_XPD, true); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_x_gain[ee_mode], + AR5K_RF_XPD_GAIN, true); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode], + AR5K_RF_GAIN_I, true); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode], + AR5K_RF_PLO_SEL, true); + + /* Tweak power detectors for half/quarter rate support */ + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ || + ah->ah_bwmode == AR5K_BWMODE_10MHZ) { + u8 wait_i; + + ath5k_hw_rfb_op(ah, rf_regs, 0x1f, + AR5K_RF_WAIT_S, true); + + wait_i = (ah->ah_bwmode == AR5K_BWMODE_5MHZ) ? + 0x1f : 0x10; + + ath5k_hw_rfb_op(ah, rf_regs, wait_i, + AR5K_RF_WAIT_I, true); + ath5k_hw_rfb_op(ah, rf_regs, 3, + AR5K_RF_MAX_TIME, true); + + } + } + + if (ah->ah_radio == AR5K_RF5112) { + + /* Set gain_F settings according to current step */ + if (channel->hw_value != AR5K_MODE_11B) { + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[0], + AR5K_RF_MIXGAIN_OVR, true); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1], + AR5K_RF_PWD_138, true); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2], + AR5K_RF_PWD_137, true); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3], + AR5K_RF_PWD_136, true); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[4], + AR5K_RF_PWD_132, true); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[5], + AR5K_RF_PWD_131, true); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[6], + AR5K_RF_PWD_130, true); + + /* We programmed gain_F parameters, switch back + * to active state */ + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + } + + /* Bank 6/7 setup */ + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode], + AR5K_RF_XPD_SEL, true); + + if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) { + /* Rev. 1 supports only one xpd */ + ath5k_hw_rfb_op(ah, rf_regs, + ee->ee_x_gain[ee_mode], + AR5K_RF_XPD_GAIN, true); + + } else { + u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode]; + if (ee->ee_pd_gains[ee_mode] > 1) { + ath5k_hw_rfb_op(ah, rf_regs, + pdg_curve_to_idx[0], + AR5K_RF_PD_GAIN_LO, true); + ath5k_hw_rfb_op(ah, rf_regs, + pdg_curve_to_idx[1], + AR5K_RF_PD_GAIN_HI, true); + } else { + ath5k_hw_rfb_op(ah, rf_regs, + pdg_curve_to_idx[0], + AR5K_RF_PD_GAIN_LO, true); + ath5k_hw_rfb_op(ah, rf_regs, + pdg_curve_to_idx[0], + AR5K_RF_PD_GAIN_HI, true); + } + + /* Lower synth voltage on Rev 2 */ + if (ah->ah_radio == AR5K_RF5112 && + (ah->ah_radio_5ghz_revision & AR5K_SREV_REV) > 0) { + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_HIGH_VC_CP, true); + + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_MID_VC_CP, true); + + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_LOW_VC_CP, true); + + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_PUSH_UP, true); + } + + /* Decrease power consumption on 5213+ BaseBand */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_PAD2GND, true); + + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_XB2_LVL, true); + + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_XB5_LVL, true); + + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_PWD_167, true); + + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_PWD_166, true); + } + } + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode], + AR5K_RF_GAIN_I, true); + + /* Tweak power detector for half/quarter rates */ + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ || + ah->ah_bwmode == AR5K_BWMODE_10MHZ) { + u8 pd_delay; + + pd_delay = (ah->ah_bwmode == AR5K_BWMODE_5MHZ) ? + 0xf : 0x8; + + ath5k_hw_rfb_op(ah, rf_regs, pd_delay, + AR5K_RF_PD_PERIOD_A, true); + ath5k_hw_rfb_op(ah, rf_regs, 0xf, + AR5K_RF_PD_DELAY_A, true); + + } + } + + if (ah->ah_radio == AR5K_RF5413 && + channel->band == NL80211_BAND_2GHZ) { + + ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_DERBY_CHAN_SEL_MODE, + true); + + /* Set optimum value for early revisions (on pci-e chips) */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424 && + ah->ah_mac_srev < AR5K_SREV_AR5413) + ath5k_hw_rfb_op(ah, rf_regs, ath5k_hw_bitswap(6, 3), + AR5K_RF_PWD_ICLOBUF_2G, true); + + } + + /* Write RF banks on hw */ + for (i = 0; i < ah->ah_rf_banks_size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, rfb[i], ini_rfb[i].rfb_ctrl_register); + } + + return 0; +} + + +/**************************\ + PHY/RF channel functions +\**************************/ + +/** + * ath5k_hw_rf5110_chan2athchan() - Convert channel freq on RF5110 + * @channel: The &struct ieee80211_channel + * + * Map channel frequency to IEEE channel number and convert it + * to an internal channel value used by the RF5110 chipset. + */ +static u32 +ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) +{ + u32 athchan; + + athchan = (ath5k_hw_bitswap( + (ieee80211_frequency_to_channel( + channel->center_freq) - 24) / 2, 5) + << 1) | (1 << 6) | 0x1; + return athchan; +} + +/** + * ath5k_hw_rf5110_channel() - Set channel frequency on RF5110 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + */ +static int +ath5k_hw_rf5110_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 data; + + /* + * Set the channel and wait + */ + data = ath5k_hw_rf5110_chan2athchan(channel); + ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0); + usleep_range(1000, 1500); + + return 0; +} + +/** + * ath5k_hw_rf5111_chan2athchan() - Handle 2GHz channels on RF5111/2111 + * @ieee: IEEE channel number + * @athchan: The &struct ath5k_athchan_2ghz + * + * In order to enable the RF2111 frequency converter on RF5111/2111 setups + * we need to add some offsets and extra flags to the data values we pass + * on to the PHY. So for every 2GHz channel this function gets called + * to do the conversion. + */ +static int +ath5k_hw_rf5111_chan2athchan(unsigned int ieee, + struct ath5k_athchan_2ghz *athchan) +{ + int channel; + + /* Cast this value to catch negative channel numbers (>= -19) */ + channel = (int)ieee; + + /* + * Map 2GHz IEEE channel to 5GHz Atheros channel + */ + if (channel <= 13) { + athchan->a2_athchan = 115 + channel; + athchan->a2_flags = 0x46; + } else if (channel == 14) { + athchan->a2_athchan = 124; + athchan->a2_flags = 0x44; + } else if (channel >= 15 && channel <= 26) { + athchan->a2_athchan = ((channel - 14) * 4) + 132; + athchan->a2_flags = 0x46; + } else + return -EINVAL; + + return 0; +} + +/** + * ath5k_hw_rf5111_channel() - Set channel frequency on RF5111/2111 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + */ +static int +ath5k_hw_rf5111_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + struct ath5k_athchan_2ghz ath5k_channel_2ghz; + unsigned int ath5k_channel = + ieee80211_frequency_to_channel(channel->center_freq); + u32 data0, data1, clock; + int ret; + + /* + * Set the channel on the RF5111 radio + */ + data0 = data1 = 0; + + if (channel->band == NL80211_BAND_2GHZ) { + /* Map 2GHz channel to 5GHz Atheros channel ID */ + ret = ath5k_hw_rf5111_chan2athchan( + ieee80211_frequency_to_channel(channel->center_freq), + &ath5k_channel_2ghz); + if (ret) + return ret; + + ath5k_channel = ath5k_channel_2ghz.a2_athchan; + data0 = ((ath5k_hw_bitswap(ath5k_channel_2ghz.a2_flags, 8) & 0xff) + << 5) | (1 << 4); + } + + if (ath5k_channel < 145 || !(ath5k_channel & 1)) { + clock = 1; + data1 = ((ath5k_hw_bitswap(ath5k_channel - 24, 8) & 0xff) << 2) | + (clock << 1) | (1 << 10) | 1; + } else { + clock = 0; + data1 = ((ath5k_hw_bitswap((ath5k_channel - 24) / 2, 8) & 0xff) + << 2) | (clock << 1) | (1 << 10) | 1; + } + + ath5k_hw_reg_write(ah, (data1 & 0xff) | ((data0 & 0xff) << 8), + AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, ((data1 >> 8) & 0xff) | (data0 & 0xff00), + AR5K_RF_BUFFER_CONTROL_3); + + return 0; +} + +/** + * ath5k_hw_rf5112_channel() - Set channel frequency on 5112 and newer + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * On RF5112/2112 and newer we don't need to do any conversion. + * We pass the frequency value after a few modifications to the + * chip directly. + * + * NOTE: Make sure channel frequency given is within our range or else + * we might damage the chip ! Use ath5k_channel_ok before calling this one. + */ +static int +ath5k_hw_rf5112_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 data, data0, data1, data2; + u16 c; + + data = data0 = data1 = data2 = 0; + c = channel->center_freq; + + /* My guess based on code: + * 2GHz RF has 2 synth modes, one with a Local Oscillator + * at 2224Hz and one with a LO at 2192Hz. IF is 1520Hz + * (3040/2). data0 is used to set the PLL divider and data1 + * selects synth mode. */ + if (c < 4800) { + /* Channel 14 and all frequencies with 2Hz spacing + * below/above (non-standard channels) */ + if (!((c - 2224) % 5)) { + /* Same as (c - 2224) / 5 */ + data0 = ((2 * (c - 704)) - 3040) / 10; + data1 = 1; + /* Channel 1 and all frequencies with 5Hz spacing + * below/above (standard channels without channel 14) */ + } else if (!((c - 2192) % 5)) { + /* Same as (c - 2192) / 5 */ + data0 = ((2 * (c - 672)) - 3040) / 10; + data1 = 0; + } else + return -EINVAL; + + data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8); + /* This is more complex, we have a single synthesizer with + * 4 reference clock settings (?) based on frequency spacing + * and set using data2. LO is at 4800Hz and data0 is again used + * to set some divider. + * + * NOTE: There is an old atheros presentation at Stanford + * that mentions a method called dual direct conversion + * with 1GHz sliding IF for RF5110. Maybe that's what we + * have here, or an updated version. */ + } else if ((c % 5) != 2 || c > 5435) { + if (!(c % 20) && c >= 5120) { + data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); + data2 = ath5k_hw_bitswap(3, 2); + } else if (!(c % 10)) { + data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8); + data2 = ath5k_hw_bitswap(2, 2); + } else if (!(c % 5)) { + data0 = ath5k_hw_bitswap((c - 4800) / 5, 8); + data2 = ath5k_hw_bitswap(1, 2); + } else + return -EINVAL; + } else { + data0 = ath5k_hw_bitswap((10 * (c - 2 - 4800)) / 25 + 1, 8); + data2 = ath5k_hw_bitswap(0, 2); + } + + data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001; + + ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5); + + return 0; +} + +/** + * ath5k_hw_rf2425_channel() - Set channel frequency on RF2425 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * AR2425/2417 have a different 2GHz RF so code changes + * a little bit from RF5112. + */ +static int +ath5k_hw_rf2425_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 data, data0, data2; + u16 c; + + data = data0 = data2 = 0; + c = channel->center_freq; + + if (c < 4800) { + data0 = ath5k_hw_bitswap((c - 2272), 8); + data2 = 0; + /* ? 5GHz ? */ + } else if ((c % 5) != 2 || c > 5435) { + if (!(c % 20) && c < 5120) + data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); + else if (!(c % 10)) + data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8); + else if (!(c % 5)) + data0 = ath5k_hw_bitswap((c - 4800) / 5, 8); + else + return -EINVAL; + data2 = ath5k_hw_bitswap(1, 2); + } else { + data0 = ath5k_hw_bitswap((10 * (c - 2 - 4800)) / 25 + 1, 8); + data2 = ath5k_hw_bitswap(0, 2); + } + + data = (data0 << 4) | data2 << 2 | 0x1001; + + ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5); + + return 0; +} + +/** + * ath5k_hw_channel() - Set a channel on the radio chip + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * This is the main function called to set a channel on the + * radio chip based on the radio chip version. + */ +static int +ath5k_hw_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + int ret; + /* + * Check bounds supported by the PHY (we don't care about regulatory + * restrictions at this point). + */ + if (!ath5k_channel_ok(ah, channel)) { + ATH5K_ERR(ah, + "channel frequency (%u MHz) out of supported " + "band range\n", + channel->center_freq); + return -EINVAL; + } + + /* + * Set the channel and wait + */ + switch (ah->ah_radio) { + case AR5K_RF5110: + ret = ath5k_hw_rf5110_channel(ah, channel); + break; + case AR5K_RF5111: + ret = ath5k_hw_rf5111_channel(ah, channel); + break; + case AR5K_RF2317: + case AR5K_RF2425: + ret = ath5k_hw_rf2425_channel(ah, channel); + break; + default: + ret = ath5k_hw_rf5112_channel(ah, channel); + break; + } + + if (ret) + return ret; + + /* Set JAPAN setting for channel 14 */ + if (channel->center_freq == 2484) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, + AR5K_PHY_CCKTXCTL_JAPAN); + } else { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, + AR5K_PHY_CCKTXCTL_WORLD); + } + + ah->ah_current_channel = channel; + + return 0; +} + + +/*****************\ + PHY calibration +\*****************/ + +/** + * DOC: PHY Calibration routines + * + * Noise floor calibration: When we tell the hardware to + * perform a noise floor calibration by setting the + * AR5K_PHY_AGCCTL_NF bit on AR5K_PHY_AGCCTL, it will periodically + * sample-and-hold the minimum noise level seen at the antennas. + * This value is then stored in a ring buffer of recently measured + * noise floor values so we have a moving window of the last few + * samples. The median of the values in the history is then loaded + * into the hardware for its own use for RSSI and CCA measurements. + * This type of calibration doesn't interfere with traffic. + * + * AGC calibration: When we tell the hardware to perform + * an AGC (Automatic Gain Control) calibration by setting the + * AR5K_PHY_AGCCTL_CAL, hw disconnects the antennas and does + * a calibration on the DC offsets of ADCs. During this period + * rx/tx gets disabled so we have to deal with it on the driver + * part. + * + * I/Q calibration: When we tell the hardware to perform + * an I/Q calibration, it tries to correct I/Q imbalance and + * fix QAM constellation by sampling data from rxed frames. + * It doesn't interfere with traffic. + * + * For more infos on AGC and I/Q calibration check out patent doc + * #03/094463. + */ + +/** + * ath5k_hw_read_measured_noise_floor() - Read measured NF from hw + * @ah: The &struct ath5k_hw + */ +static s32 +ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah) +{ + s32 val; + + val = ath5k_hw_reg_read(ah, AR5K_PHY_NF); + return sign_extend32(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 8); +} + +/** + * ath5k_hw_init_nfcal_hist() - Initialize NF calibration history buffer + * @ah: The &struct ath5k_hw + */ +void +ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah) +{ + int i; + + ah->ah_nfcal_hist.index = 0; + for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++) + ah->ah_nfcal_hist.nfval[i] = AR5K_TUNE_CCA_MAX_GOOD_VALUE; +} + +/** + * ath5k_hw_update_nfcal_hist() - Update NF calibration history buffer + * @ah: The &struct ath5k_hw + * @noise_floor: The NF we got from hw + */ +static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor) +{ + struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist; + hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX - 1); + hist->nfval[hist->index] = noise_floor; +} + +/** + * ath5k_hw_get_median_noise_floor() - Get median NF from history buffer + * @ah: The &struct ath5k_hw + */ +static s16 +ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) +{ + s16 sort[ATH5K_NF_CAL_HIST_MAX]; + s16 tmp; + int i, j; + + memcpy(sort, ah->ah_nfcal_hist.nfval, sizeof(sort)); + for (i = 0; i < ATH5K_NF_CAL_HIST_MAX - 1; i++) { + for (j = 1; j < ATH5K_NF_CAL_HIST_MAX - i; j++) { + if (sort[j] > sort[j - 1]) { + tmp = sort[j]; + sort[j] = sort[j - 1]; + sort[j - 1] = tmp; + } + } + } + for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++) { + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, + "cal %d:%d\n", i, sort[i]); + } + return sort[(ATH5K_NF_CAL_HIST_MAX - 1) / 2]; +} + +/** + * ath5k_hw_update_noise_floor() - Update NF on hardware + * @ah: The &struct ath5k_hw + * + * This is the main function we call to perform a NF calibration, + * it reads NF from hardware, calculates the median and updates + * NF on hw. + */ +void +ath5k_hw_update_noise_floor(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 val; + s16 nf, threshold; + u8 ee_mode; + + /* keep last value if calibration hasn't completed */ + if (ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL) & AR5K_PHY_AGCCTL_NF) { + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, + "NF did not complete in calibration window\n"); + + return; + } + + ah->ah_cal_mask |= AR5K_CALIBRATION_NF; + + ee_mode = ath5k_eeprom_mode_from_channel(ah, ah->ah_current_channel); + + /* completed NF calibration, test threshold */ + nf = ath5k_hw_read_measured_noise_floor(ah); + threshold = ee->ee_noise_floor_thr[ee_mode]; + + if (nf > threshold) { + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, + "noise floor failure detected; " + "read %d, threshold %d\n", + nf, threshold); + + nf = AR5K_TUNE_CCA_MAX_GOOD_VALUE; + } + + ath5k_hw_update_nfcal_hist(ah, nf); + nf = ath5k_hw_get_median_noise_floor(ah); + + /* load noise floor (in .5 dBm) so the hardware will use it */ + val = ath5k_hw_reg_read(ah, AR5K_PHY_NF) & ~AR5K_PHY_NF_M; + val |= (nf * 2) & AR5K_PHY_NF_M; + ath5k_hw_reg_write(ah, val, AR5K_PHY_NF); + + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF, + ~(AR5K_PHY_AGCCTL_NF_EN | AR5K_PHY_AGCCTL_NF_NOUPDATE)); + + ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF, + 0, false); + + /* + * Load a high max CCA Power value (-50 dBm in .5 dBm units) + * so that we're not capped by the median we just loaded. + * This will be used as the initial value for the next noise + * floor calibration. + */ + val = (val & ~AR5K_PHY_NF_M) | ((-50 * 2) & AR5K_PHY_NF_M); + ath5k_hw_reg_write(ah, val, AR5K_PHY_NF); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF_EN | + AR5K_PHY_AGCCTL_NF_NOUPDATE | + AR5K_PHY_AGCCTL_NF); + + ah->ah_noise_floor = nf; + + ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF; + + ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, + "noise floor calibrated: %d\n", nf); +} + +/** + * ath5k_hw_rf5110_calibrate() - Perform a PHY calibration on RF5110 + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Do a complete PHY calibration (AGC + NF + I/Q) on RF5110 + */ +static int +ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 phy_sig, phy_agc, phy_sat, beacon; + int ret; + + if (!(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) + return 0; + + /* + * Disable beacons and RX/TX queues, wait + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5210, + AR5K_DIAG_SW_DIS_TX_5210 | AR5K_DIAG_SW_DIS_RX_5210); + beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210); + ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210); + + usleep_range(2000, 2500); + + /* + * Set the channel (with AGC turned off) + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + udelay(10); + ret = ath5k_hw_channel(ah, channel); + + /* + * Activate PHY and wait + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + usleep_range(1000, 1500); + + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + + if (ret) + return ret; + + /* + * Calibrate the radio chip + */ + + /* Remember normal state */ + phy_sig = ath5k_hw_reg_read(ah, AR5K_PHY_SIG); + phy_agc = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCOARSE); + phy_sat = ath5k_hw_reg_read(ah, AR5K_PHY_ADCSAT); + + /* Update radio registers */ + ath5k_hw_reg_write(ah, (phy_sig & ~(AR5K_PHY_SIG_FIRPWR)) | + AR5K_REG_SM(-1, AR5K_PHY_SIG_FIRPWR), AR5K_PHY_SIG); + + ath5k_hw_reg_write(ah, (phy_agc & ~(AR5K_PHY_AGCCOARSE_HI | + AR5K_PHY_AGCCOARSE_LO)) | + AR5K_REG_SM(-1, AR5K_PHY_AGCCOARSE_HI) | + AR5K_REG_SM(-127, AR5K_PHY_AGCCOARSE_LO), AR5K_PHY_AGCCOARSE); + + ath5k_hw_reg_write(ah, (phy_sat & ~(AR5K_PHY_ADCSAT_ICNT | + AR5K_PHY_ADCSAT_THR)) | + AR5K_REG_SM(2, AR5K_PHY_ADCSAT_ICNT) | + AR5K_REG_SM(12, AR5K_PHY_ADCSAT_THR), AR5K_PHY_ADCSAT); + + udelay(20); + + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + udelay(10); + ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG); + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + + usleep_range(1000, 1500); + + /* + * Enable calibration and wait until completion + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL); + + ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, false); + + /* Reset to normal state */ + ath5k_hw_reg_write(ah, phy_sig, AR5K_PHY_SIG); + ath5k_hw_reg_write(ah, phy_agc, AR5K_PHY_AGCCOARSE); + ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT); + + if (ret) { + ATH5K_ERR(ah, "calibration timeout (%uMHz)\n", + channel->center_freq); + return ret; + } + + /* + * Re-enable RX/TX and beacons + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5210, + AR5K_DIAG_SW_DIS_TX_5210 | AR5K_DIAG_SW_DIS_RX_5210); + ath5k_hw_reg_write(ah, beacon, AR5K_BEACON_5210); + + return 0; +} + +/** + * ath5k_hw_rf511x_iq_calibrate() - Perform I/Q calibration on RF5111 and newer + * @ah: The &struct ath5k_hw + */ +static int +ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) +{ + u32 i_pwr, q_pwr; + s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; + int i; + + /* Skip if I/Q calibration is not needed or if it's still running */ + if (!ah->ah_iq_cal_needed) + return -EINVAL; + else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, + "I/Q calibration still running"); + return -EBUSY; + } + + /* Calibration has finished, get the results and re-run */ + + /* Work around for empty results which can apparently happen on 5212: + * Read registers up to 10 times until we get both i_pr and q_pwr */ + for (i = 0; i <= 10; i++) { + iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); + i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); + q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q); + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, + "iq_corr:%x i_pwr:%x q_pwr:%x", iq_corr, i_pwr, q_pwr); + if (i_pwr && q_pwr) + break; + } + + i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7; + + if (ah->ah_version == AR5K_AR5211) + q_coffd = q_pwr >> 6; + else + q_coffd = q_pwr >> 7; + + /* In case i_coffd became zero, cancel calibration + * not only it's too small, it'll also result a divide + * by zero later on. */ + if (i_coffd == 0 || q_coffd < 2) + return -ECANCELED; + + /* Protect against loss of sign bits */ + + i_coff = (-iq_corr) / i_coffd; + i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */ + + if (ah->ah_version == AR5K_AR5211) + q_coff = (i_pwr / q_coffd) - 64; + else + q_coff = (i_pwr / q_coffd) - 128; + q_coff = clamp(q_coff, -16, 15); /* signed 5 bit */ + + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, + "new I:%d Q:%d (i_coffd:%x q_coffd:%x)", + i_coff, q_coff, i_coffd, q_coffd); + + /* Commit new I/Q values (set enable bit last to match HAL sources) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, i_coff); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, q_coff); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE); + + /* Re-enable calibration -if we don't we'll commit + * the same values again and again */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN); + + return 0; +} + +/** + * ath5k_hw_phy_calibrate() - Perform a PHY calibration + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * The main function we call from above to perform + * a short or full PHY calibration based on RF chip + * and current channel + */ +int +ath5k_hw_phy_calibrate(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + int ret; + + if (ah->ah_radio == AR5K_RF5110) + return ath5k_hw_rf5110_calibrate(ah, channel); + + ret = ath5k_hw_rf511x_iq_calibrate(ah); + if (ret) { + ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE, + "No I/Q correction performed (%uMHz)\n", + channel->center_freq); + + /* Happens all the time if there is not much + * traffic, consider it normal behaviour. */ + ret = 0; + } + + /* On full calibration request a PAPD probe for + * gainf calibration if needed */ + if ((ah->ah_cal_mask & AR5K_CALIBRATION_FULL) && + (ah->ah_radio == AR5K_RF5111 || + ah->ah_radio == AR5K_RF5112) && + channel->hw_value != AR5K_MODE_11B) + ath5k_hw_request_rfgain_probe(ah); + + /* Update noise floor */ + if (!(ah->ah_cal_mask & AR5K_CALIBRATION_NF)) + ath5k_hw_update_noise_floor(ah); + + return ret; +} + + +/***************************\ +* Spur mitigation functions * +\***************************/ + +/** + * ath5k_hw_set_spur_mitigation_filter() - Configure SPUR filter + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * This function gets called during PHY initialization to + * configure the spur filter for the given channel. Spur is noise + * generated due to "reflection" effects, for more information on this + * method check out patent US7643810 + */ +static void +ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 mag_mask[4] = {0, 0, 0, 0}; + u32 pilot_mask[2] = {0, 0}; + /* Note: fbin values are scaled up by 2 */ + u16 spur_chan_fbin, chan_fbin, symbol_width, spur_detection_window; + s32 spur_delta_phase, spur_freq_sigma_delta; + s32 spur_offset, num_symbols_x16; + u8 num_symbol_offsets, i, freq_band; + + /* Convert current frequency to fbin value (the same way channels + * are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale + * up by 2 so we can compare it later */ + if (channel->band == NL80211_BAND_2GHZ) { + chan_fbin = (channel->center_freq - 2300) * 10; + freq_band = AR5K_EEPROM_BAND_2GHZ; + } else { + chan_fbin = (channel->center_freq - 4900) * 10; + freq_band = AR5K_EEPROM_BAND_5GHZ; + } + + /* Check if any spur_chan_fbin from EEPROM is + * within our current channel's spur detection range */ + spur_chan_fbin = AR5K_EEPROM_NO_SPUR; + spur_detection_window = AR5K_SPUR_CHAN_WIDTH; + /* XXX: Half/Quarter channels ?*/ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) + spur_detection_window *= 2; + + for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) { + spur_chan_fbin = ee->ee_spur_chans[i][freq_band]; + + /* Note: mask cleans AR5K_EEPROM_NO_SPUR flag + * so it's zero if we got nothing from EEPROM */ + if (spur_chan_fbin == AR5K_EEPROM_NO_SPUR) { + spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK; + break; + } + + if ((chan_fbin - spur_detection_window <= + (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK)) && + (chan_fbin + spur_detection_window >= + (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK))) { + spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK; + break; + } + } + + /* We need to enable spur filter for this channel */ + if (spur_chan_fbin) { + spur_offset = spur_chan_fbin - chan_fbin; + /* + * Calculate deltas: + * spur_freq_sigma_delta -> spur_offset / sample_freq << 21 + * spur_delta_phase -> spur_offset / chip_freq << 11 + * Note: Both values have 100Hz resolution + */ + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + /* Both sample_freq and chip_freq are 80MHz */ + spur_delta_phase = (spur_offset << 16) / 25; + spur_freq_sigma_delta = (spur_delta_phase >> 10); + symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz * 2; + break; + case AR5K_BWMODE_10MHZ: + /* Both sample_freq and chip_freq are 20MHz (?) */ + spur_delta_phase = (spur_offset << 18) / 25; + spur_freq_sigma_delta = (spur_delta_phase >> 10); + symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 2; + break; + case AR5K_BWMODE_5MHZ: + /* Both sample_freq and chip_freq are 10MHz (?) */ + spur_delta_phase = (spur_offset << 19) / 25; + spur_freq_sigma_delta = (spur_delta_phase >> 10); + symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 4; + break; + default: + if (channel->band == NL80211_BAND_5GHZ) { + /* Both sample_freq and chip_freq are 40MHz */ + spur_delta_phase = (spur_offset << 17) / 25; + spur_freq_sigma_delta = + (spur_delta_phase >> 10); + symbol_width = + AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz; + } else { + /* sample_freq -> 40MHz chip_freq -> 44MHz + * (for b compatibility) */ + spur_delta_phase = (spur_offset << 17) / 25; + spur_freq_sigma_delta = + (spur_offset << 8) / 55; + symbol_width = + AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz; + } + break; + } + + /* Calculate pilot and magnitude masks */ + + /* Scale up spur_offset by 1000 to switch to 100HZ resolution + * and divide by symbol_width to find how many symbols we have + * Note: number of symbols is scaled up by 16 */ + num_symbols_x16 = ((spur_offset * 1000) << 4) / symbol_width; + + /* Spur is on a symbol if num_symbols_x16 % 16 is zero */ + if (!(num_symbols_x16 & 0xF)) + /* _X_ */ + num_symbol_offsets = 3; + else + /* _xx_ */ + num_symbol_offsets = 4; + + for (i = 0; i < num_symbol_offsets; i++) { + + /* Calculate pilot mask */ + s32 curr_sym_off = + (num_symbols_x16 / 16) + i + 25; + + /* Pilot magnitude mask seems to be a way to + * declare the boundaries for our detection + * window or something, it's 2 for the middle + * value(s) where the symbol is expected to be + * and 1 on the boundary values */ + u8 plt_mag_map = + (i == 0 || i == (num_symbol_offsets - 1)) + ? 1 : 2; + + if (curr_sym_off >= 0 && curr_sym_off <= 32) { + if (curr_sym_off <= 25) + pilot_mask[0] |= 1 << curr_sym_off; + else if (curr_sym_off >= 27) + pilot_mask[0] |= 1 << (curr_sym_off - 1); + } else if (curr_sym_off >= 33 && curr_sym_off <= 52) + pilot_mask[1] |= 1 << (curr_sym_off - 33); + + /* Calculate magnitude mask (for viterbi decoder) */ + if (curr_sym_off >= -1 && curr_sym_off <= 14) + mag_mask[0] |= + plt_mag_map << (curr_sym_off + 1) * 2; + else if (curr_sym_off >= 15 && curr_sym_off <= 30) + mag_mask[1] |= + plt_mag_map << (curr_sym_off - 15) * 2; + else if (curr_sym_off >= 31 && curr_sym_off <= 46) + mag_mask[2] |= + plt_mag_map << (curr_sym_off - 31) * 2; + else if (curr_sym_off >= 47 && curr_sym_off <= 53) + mag_mask[3] |= + plt_mag_map << (curr_sym_off - 47) * 2; + + } + + /* Write settings on hw to enable spur filter */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, + AR5K_PHY_BIN_MASK_CTL_RATE, 0xff); + /* XXX: Self correlator also ? */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_PILOT_MASK_EN | + AR5K_PHY_IQ_CHAN_MASK_EN | + AR5K_PHY_IQ_SPUR_FILT_EN); + + /* Set delta phase and freq sigma delta */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(spur_delta_phase, + AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE) | + AR5K_REG_SM(spur_freq_sigma_delta, + AR5K_PHY_TIMING_11_SPUR_FREQ_SD) | + AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC, + AR5K_PHY_TIMING_11); + + /* Write pilot masks */ + ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_7); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8, + AR5K_PHY_TIMING_8_PILOT_MASK_2, + pilot_mask[1]); + + ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_9); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10, + AR5K_PHY_TIMING_10_PILOT_MASK_2, + pilot_mask[1]); + + /* Write magnitude masks */ + ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK_1); + ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK_2); + ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK_3); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, + AR5K_PHY_BIN_MASK_CTL_MASK_4, + mag_mask[3]); + + ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK2_1); + ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK2_2); + ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK2_3); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4, + AR5K_PHY_BIN_MASK2_4_MASK_4, + mag_mask[3]); + + } else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & + AR5K_PHY_IQ_SPUR_FILT_EN) { + /* Clean up spur mitigation settings and disable filter */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, + AR5K_PHY_BIN_MASK_CTL_RATE, 0); + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_PILOT_MASK_EN | + AR5K_PHY_IQ_CHAN_MASK_EN | + AR5K_PHY_IQ_SPUR_FILT_EN); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_11); + + /* Clear pilot masks */ + ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_7); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8, + AR5K_PHY_TIMING_8_PILOT_MASK_2, + 0); + + ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_9); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10, + AR5K_PHY_TIMING_10_PILOT_MASK_2, + 0); + + /* Clear magnitude masks */ + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_1); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_2); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_3); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, + AR5K_PHY_BIN_MASK_CTL_MASK_4, + 0); + + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_1); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_2); + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_3); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4, + AR5K_PHY_BIN_MASK2_4_MASK_4, + 0); + } +} + + +/*****************\ +* Antenna control * +\*****************/ + +/** + * DOC: Antenna control + * + * Hw supports up to 14 antennas ! I haven't found any card that implements + * that. The maximum number of antennas I've seen is up to 4 (2 for 2GHz and 2 + * for 5GHz). Antenna 1 (MAIN) should be omnidirectional, 2 (AUX) + * omnidirectional or sectorial and antennas 3-14 sectorial (or directional). + * + * We can have a single antenna for RX and multiple antennas for TX. + * RX antenna is our "default" antenna (usually antenna 1) set on + * DEFAULT_ANTENNA register and TX antenna is set on each TX control descriptor + * (0 for automatic selection, 1 - 14 antenna number). + * + * We can let hw do all the work doing fast antenna diversity for both + * tx and rx or we can do things manually. Here are the options we have + * (all are bits of STA_ID1 register): + * + * AR5K_STA_ID1_DEFAULT_ANTENNA -> When 0 is set as the TX antenna on TX + * control descriptor, use the default antenna to transmit or else use the last + * antenna on which we received an ACK. + * + * AR5K_STA_ID1_DESC_ANTENNA -> Update default antenna after each TX frame to + * the antenna on which we got the ACK for that frame. + * + * AR5K_STA_ID1_RTS_DEF_ANTENNA -> Use default antenna for RTS or else use the + * one on the TX descriptor. + * + * AR5K_STA_ID1_SELFGEN_DEF_ANT -> Use default antenna for self generated frames + * (ACKs etc), or else use current antenna (the one we just used for TX). + * + * Using the above we support the following scenarios: + * + * AR5K_ANTMODE_DEFAULT -> Hw handles antenna diversity etc automatically + * + * AR5K_ANTMODE_FIXED_A -> Only antenna A (MAIN) is present + * + * AR5K_ANTMODE_FIXED_B -> Only antenna B (AUX) is present + * + * AR5K_ANTMODE_SINGLE_AP -> Sta locked on a single ap + * + * AR5K_ANTMODE_SECTOR_AP -> AP with tx antenna set on tx desc + * + * AR5K_ANTMODE_SECTOR_STA -> STA with tx antenna set on tx desc + * + * AR5K_ANTMODE_DEBUG Debug mode -A -> Rx, B-> Tx- + * + * Also note that when setting antenna to F on tx descriptor card inverts + * current tx antenna. + */ + +/** + * ath5k_hw_set_def_antenna() - Set default rx antenna on AR5211/5212 and newer + * @ah: The &struct ath5k_hw + * @ant: Antenna number + */ +static void +ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant) +{ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA); +} + +/** + * ath5k_hw_set_fast_div() - Enable/disable fast rx antenna diversity + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + * @enable: True to enable, false to disable + */ +static void +ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable) +{ + switch (ee_mode) { + case AR5K_EEPROM_MODE_11G: + /* XXX: This is set to + * disabled on initvals !!! */ + case AR5K_EEPROM_MODE_11A: + if (enable) + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_OFDM_DIV_DIS); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_OFDM_DIV_DIS); + break; + case AR5K_EEPROM_MODE_11B: + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_OFDM_DIV_DIS); + break; + default: + return; + } + + if (enable) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART, + AR5K_PHY_RESTART_DIV_GC, 4); + + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV, + AR5K_PHY_FAST_ANT_DIV_EN); + } else { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART, + AR5K_PHY_RESTART_DIV_GC, 0); + + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV, + AR5K_PHY_FAST_ANT_DIV_EN); + } +} + +/** + * ath5k_hw_set_antenna_switch() - Set up antenna switch table + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + * + * Switch table comes from EEPROM and includes information on controlling + * the 2 antenna RX attenuators + */ +void +ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode) +{ + u8 ant0, ant1; + + /* + * In case a fixed antenna was set as default + * use the same switch table twice. + */ + if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_A) + ant0 = ant1 = AR5K_ANT_SWTABLE_A; + else if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_B) + ant0 = ant1 = AR5K_ANT_SWTABLE_B; + else { + ant0 = AR5K_ANT_SWTABLE_A; + ant1 = AR5K_ANT_SWTABLE_B; + } + + /* Set antenna idle switch table */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL, + AR5K_PHY_ANT_CTL_SWTABLE_IDLE, + (ah->ah_ant_ctl[ee_mode][AR5K_ANT_CTL] | + AR5K_PHY_ANT_CTL_TXRX_EN)); + + /* Set antenna switch tables */ + ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant0], + AR5K_PHY_ANT_SWITCH_TABLE_0); + ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant1], + AR5K_PHY_ANT_SWITCH_TABLE_1); +} + +/** + * ath5k_hw_set_antenna_mode() - Set antenna operating mode + * @ah: The &struct ath5k_hw + * @ant_mode: One of enum ath5k_ant_mode + */ +void +ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; + bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div; + bool use_def_for_sg; + int ee_mode; + u8 def_ant, tx_ant; + u32 sta_id1 = 0; + + /* if channel is not initialized yet we can't set the antennas + * so just store the mode. it will be set on the next reset */ + if (channel == NULL) { + ah->ah_ant_mode = ant_mode; + return; + } + + def_ant = ah->ah_def_ant; + + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); + + switch (ant_mode) { + case AR5K_ANTMODE_DEFAULT: + tx_ant = 0; + use_def_for_tx = false; + update_def_on_tx = false; + use_def_for_rts = false; + use_def_for_sg = false; + fast_div = true; + break; + case AR5K_ANTMODE_FIXED_A: + def_ant = 1; + tx_ant = 1; + use_def_for_tx = true; + update_def_on_tx = false; + use_def_for_rts = true; + use_def_for_sg = true; + fast_div = false; + break; + case AR5K_ANTMODE_FIXED_B: + def_ant = 2; + tx_ant = 2; + use_def_for_tx = true; + update_def_on_tx = false; + use_def_for_rts = true; + use_def_for_sg = true; + fast_div = false; + break; + case AR5K_ANTMODE_SINGLE_AP: + def_ant = 1; /* updated on tx */ + tx_ant = 0; + use_def_for_tx = true; + update_def_on_tx = true; + use_def_for_rts = true; + use_def_for_sg = true; + fast_div = true; + break; + case AR5K_ANTMODE_SECTOR_AP: + tx_ant = 1; /* variable */ + use_def_for_tx = false; + update_def_on_tx = false; + use_def_for_rts = true; + use_def_for_sg = false; + fast_div = false; + break; + case AR5K_ANTMODE_SECTOR_STA: + tx_ant = 1; /* variable */ + use_def_for_tx = true; + update_def_on_tx = false; + use_def_for_rts = true; + use_def_for_sg = false; + fast_div = true; + break; + case AR5K_ANTMODE_DEBUG: + def_ant = 1; + tx_ant = 2; + use_def_for_tx = false; + update_def_on_tx = false; + use_def_for_rts = false; + use_def_for_sg = false; + fast_div = false; + break; + default: + return; + } + + ah->ah_tx_ant = tx_ant; + ah->ah_ant_mode = ant_mode; + ah->ah_def_ant = def_ant; + + sta_id1 |= use_def_for_tx ? AR5K_STA_ID1_DEFAULT_ANTENNA : 0; + sta_id1 |= update_def_on_tx ? AR5K_STA_ID1_DESC_ANTENNA : 0; + sta_id1 |= use_def_for_rts ? AR5K_STA_ID1_RTS_DEF_ANTENNA : 0; + sta_id1 |= use_def_for_sg ? AR5K_STA_ID1_SELFGEN_DEF_ANT : 0; + + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_ANTENNA_SETTINGS); + + if (sta_id1) + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, sta_id1); + + ath5k_hw_set_antenna_switch(ah, ee_mode); + /* Note: set diversity before default antenna + * because it won't work correctly */ + ath5k_hw_set_fast_div(ah, ee_mode, fast_div); + ath5k_hw_set_def_antenna(ah, def_ant); +} + + +/****************\ +* TX power setup * +\****************/ + +/* + * Helper functions + */ + +/** + * ath5k_get_interpolated_value() - Get interpolated Y val between two points + * @target: X value of the middle point + * @x_left: X value of the left point + * @x_right: X value of the right point + * @y_left: Y value of the left point + * @y_right: Y value of the right point + */ +static s16 +ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, + s16 y_left, s16 y_right) +{ + s16 ratio, result; + + /* Avoid divide by zero and skip interpolation + * if we have the same point */ + if ((x_left == x_right) || (y_left == y_right)) + return y_left; + + /* + * Since we use ints and not fps, we need to scale up in + * order to get a sane ratio value (or else we 'll eg. get + * always 1 instead of 1.25, 1.75 etc). We scale up by 100 + * to have some accuracy both for 0.5 and 0.25 steps. + */ + ratio = ((100 * y_right - 100 * y_left) / (x_right - x_left)); + + /* Now scale down to be in range */ + result = y_left + (ratio * (target - x_left) / 100); + + return result; +} + +/** + * ath5k_get_linear_pcdac_min() - Find vertical boundary (min pwr) for the + * linear PCDAC curve + * @stepL: Left array with y values (pcdac steps) + * @stepR: Right array with y values (pcdac steps) + * @pwrL: Left array with x values (power steps) + * @pwrR: Right array with x values (power steps) + * + * Since we have the top of the curve and we draw the line below + * until we reach 1 (1 pcdac step) we need to know which point + * (x value) that is so that we don't go below x axis and have negative + * pcdac values when creating the curve, or fill the table with zeros. + */ +static s16 +ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, + const s16 *pwrL, const s16 *pwrR) +{ + s8 tmp; + s16 min_pwrL, min_pwrR; + s16 pwr_i; + + /* Some vendors write the same pcdac value twice !!! */ + if (stepL[0] == stepL[1] || stepR[0] == stepR[1]) + return max(pwrL[0], pwrR[0]); + + if (pwrL[0] == pwrL[1]) + min_pwrL = pwrL[0]; + else { + pwr_i = pwrL[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrL[0], pwrL[1], + stepL[0], stepL[1]); + } while (tmp > 1); + + min_pwrL = pwr_i; + } + + if (pwrR[0] == pwrR[1]) + min_pwrR = pwrR[0]; + else { + pwr_i = pwrR[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrR[0], pwrR[1], + stepR[0], stepR[1]); + } while (tmp > 1); + + min_pwrR = pwr_i; + } + + /* Keep the right boundary so that it works for both curves */ + return max(min_pwrL, min_pwrR); +} + +/** + * ath5k_create_power_curve() - Create a Power to PDADC or PCDAC curve + * @pmin: Minimum power value (xmin) + * @pmax: Maximum power value (xmax) + * @pwr: Array of power steps (x values) + * @vpd: Array of matching PCDAC/PDADC steps (y values) + * @num_points: Number of provided points + * @vpd_table: Array to fill with the full PCDAC/PDADC values (y values) + * @type: One of enum ath5k_powertable_type (eeprom.h) + * + * Interpolate (pwr,vpd) points to create a Power to PDADC or a + * Power to PCDAC curve. + * + * Each curve has power on x axis (in 0.5dB units) and PCDAC/PDADC + * steps (offsets) on y axis. Power can go up to 31.5dB and max + * PCDAC/PDADC step for each curve is 64 but we can write more than + * one curves on hw so we can go up to 128 (which is the max step we + * can write on the final table). + * + * We write y values (PCDAC/PDADC steps) on hw. + */ +static void +ath5k_create_power_curve(s16 pmin, s16 pmax, + const s16 *pwr, const u8 *vpd, + u8 num_points, + u8 *vpd_table, u8 type) +{ + u8 idx[2] = { 0, 1 }; + s16 pwr_i = 2 * pmin; + int i; + + if (num_points < 2) + return; + + /* We want the whole line, so adjust boundaries + * to cover the entire power range. Note that + * power values are already 0.25dB so no need + * to multiply pwr_i by 2 */ + if (type == AR5K_PWRTABLE_LINEAR_PCDAC) { + pwr_i = pmin; + pmin = 0; + pmax = 63; + } + + /* Find surrounding turning points (TPs) + * and interpolate between them */ + for (i = 0; (i <= (u16) (pmax - pmin)) && + (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) { + + /* We passed the right TP, move to the next set of TPs + * if we pass the last TP, extrapolate above using the last + * two TPs for ratio */ + if ((pwr_i > pwr[idx[1]]) && (idx[1] < num_points - 1)) { + idx[0]++; + idx[1]++; + } + + vpd_table[i] = (u8) ath5k_get_interpolated_value(pwr_i, + pwr[idx[0]], pwr[idx[1]], + vpd[idx[0]], vpd[idx[1]]); + + /* Increase by 0.5dB + * (0.25 dB units) */ + pwr_i += 2; + } +} + +/** + * ath5k_get_chan_pcal_surrounding_piers() - Get surrounding calibration piers + * for a given channel. + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @pcinfo_l: The &struct ath5k_chan_pcal_info to put the left cal. pier + * @pcinfo_r: The &struct ath5k_chan_pcal_info to put the right cal. pier + * + * Get the surrounding per-channel power calibration piers + * for a given frequency so that we can interpolate between + * them and come up with an appropriate dataset for our current + * channel. + */ +static void +ath5k_get_chan_pcal_surrounding_piers(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + struct ath5k_chan_pcal_info **pcinfo_l, + struct ath5k_chan_pcal_info **pcinfo_r) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcinfo; + u8 idx_l, idx_r; + u8 mode, max, i; + u32 target = channel->center_freq; + + idx_l = 0; + idx_r = 0; + + switch (channel->hw_value) { + case AR5K_EEPROM_MODE_11A: + pcinfo = ee->ee_pwr_cal_a; + mode = AR5K_EEPROM_MODE_11A; + break; + case AR5K_EEPROM_MODE_11B: + pcinfo = ee->ee_pwr_cal_b; + mode = AR5K_EEPROM_MODE_11B; + break; + case AR5K_EEPROM_MODE_11G: + default: + pcinfo = ee->ee_pwr_cal_g; + mode = AR5K_EEPROM_MODE_11G; + break; + } + max = ee->ee_n_piers[mode] - 1; + + /* Frequency is below our calibrated + * range. Use the lowest power curve + * we have */ + if (target < pcinfo[0].freq) { + idx_l = idx_r = 0; + goto done; + } + + /* Frequency is above our calibrated + * range. Use the highest power curve + * we have */ + if (target > pcinfo[max].freq) { + idx_l = idx_r = max; + goto done; + } + + /* Frequency is inside our calibrated + * channel range. Pick the surrounding + * calibration piers so that we can + * interpolate */ + for (i = 0; i <= max; i++) { + + /* Frequency matches one of our calibration + * piers, no need to interpolate, just use + * that calibration pier */ + if (pcinfo[i].freq == target) { + idx_l = idx_r = i; + goto done; + } + + /* We found a calibration pier that's above + * frequency, use this pier and the previous + * one to interpolate */ + if (target < pcinfo[i].freq) { + idx_r = i; + idx_l = idx_r - 1; + goto done; + } + } + +done: + *pcinfo_l = &pcinfo[idx_l]; + *pcinfo_r = &pcinfo[idx_r]; +} + +/** + * ath5k_get_rate_pcal_data() - Get the interpolated per-rate power + * calibration data + * @ah: The &struct ath5k_hw *ah, + * @channel: The &struct ieee80211_channel + * @rates: The &struct ath5k_rate_pcal_info to fill + * + * Get the surrounding per-rate power calibration data + * for a given frequency and interpolate between power + * values to set max target power supported by hw for + * each rate on this frequency. + */ +static void +ath5k_get_rate_pcal_data(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + struct ath5k_rate_pcal_info *rates) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_rate_pcal_info *rpinfo; + u8 idx_l, idx_r; + u8 mode, max, i; + u32 target = channel->center_freq; + + idx_l = 0; + idx_r = 0; + + switch (channel->hw_value) { + case AR5K_MODE_11A: + rpinfo = ee->ee_rate_tpwr_a; + mode = AR5K_EEPROM_MODE_11A; + break; + case AR5K_MODE_11B: + rpinfo = ee->ee_rate_tpwr_b; + mode = AR5K_EEPROM_MODE_11B; + break; + case AR5K_MODE_11G: + default: + rpinfo = ee->ee_rate_tpwr_g; + mode = AR5K_EEPROM_MODE_11G; + break; + } + max = ee->ee_rate_target_pwr_num[mode] - 1; + + /* Get the surrounding calibration + * piers - same as above */ + if (target < rpinfo[0].freq) { + idx_l = idx_r = 0; + goto done; + } + + if (target > rpinfo[max].freq) { + idx_l = idx_r = max; + goto done; + } + + for (i = 0; i <= max; i++) { + + if (rpinfo[i].freq == target) { + idx_l = idx_r = i; + goto done; + } + + if (target < rpinfo[i].freq) { + idx_r = i; + idx_l = idx_r - 1; + goto done; + } + } + +done: + /* Now interpolate power value, based on the frequency */ + rates->freq = target; + + rates->target_power_6to24 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_6to24, + rpinfo[idx_r].target_power_6to24); + + rates->target_power_36 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_36, + rpinfo[idx_r].target_power_36); + + rates->target_power_48 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_48, + rpinfo[idx_r].target_power_48); + + rates->target_power_54 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_54, + rpinfo[idx_r].target_power_54); +} + +/** + * ath5k_get_max_ctl_power() - Get max edge power for a given frequency + * @ah: the &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Get the max edge power for this channel if + * we have such data from EEPROM's Conformance Test + * Limits (CTL), and limit max power if needed. + */ +static void +ath5k_get_max_ctl_power(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_edge_power *rep = ee->ee_ctl_pwr; + u8 *ctl_val = ee->ee_ctl; + s16 max_chan_pwr = ah->ah_txpower.txp_max_pwr / 4; + s16 edge_pwr = 0; + u8 rep_idx; + u8 i, ctl_mode; + u8 ctl_idx = 0xFF; + u32 target = channel->center_freq; + + ctl_mode = ath_regd_get_band_ctl(regulatory, channel->band); + + switch (channel->hw_value) { + case AR5K_MODE_11A: + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) + ctl_mode |= AR5K_CTL_TURBO; + else + ctl_mode |= AR5K_CTL_11A; + break; + case AR5K_MODE_11G: + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) + ctl_mode |= AR5K_CTL_TURBOG; + else + ctl_mode |= AR5K_CTL_11G; + break; + case AR5K_MODE_11B: + ctl_mode |= AR5K_CTL_11B; + break; + default: + return; + } + + for (i = 0; i < ee->ee_ctls; i++) { + if (ctl_val[i] == ctl_mode) { + ctl_idx = i; + break; + } + } + + /* If we have a CTL dataset available grab it and find the + * edge power for our frequency */ + if (ctl_idx == 0xFF) + return; + + /* Edge powers are sorted by frequency from lower + * to higher. Each CTL corresponds to 8 edge power + * measurements. */ + rep_idx = ctl_idx * AR5K_EEPROM_N_EDGES; + + /* Don't do boundaries check because we + * might have more that one bands defined + * for this mode */ + + /* Get the edge power that's closer to our + * frequency */ + for (i = 0; i < AR5K_EEPROM_N_EDGES; i++) { + rep_idx += i; + if (target <= rep[rep_idx].freq) + edge_pwr = (s16) rep[rep_idx].edge; + } + + if (edge_pwr) + ah->ah_txpower.txp_max_pwr = 4 * min(edge_pwr, max_chan_pwr); +} + + +/* + * Power to PCDAC table functions + */ + +/** + * DOC: Power to PCDAC table functions + * + * For RF5111 we have an XPD -eXternal Power Detector- curve + * for each calibrated channel. Each curve has 0,5dB Power steps + * on x axis and PCDAC steps (offsets) on y axis and looks like an + * exponential function. To recreate the curve we read 11 points + * from eeprom (eeprom.c) and interpolate here. + * + * For RF5112 we have 4 XPD -eXternal Power Detector- curves + * for each calibrated channel on 0, -6, -12 and -18dBm but we only + * use the higher (3) and the lower (0) curves. Each curve again has 0.5dB + * power steps on x axis and PCDAC steps on y axis and looks like a + * linear function. To recreate the curve and pass the power values + * on hw, we get 4 points for xpd 0 (lower gain -> max power) + * and 3 points for xpd 3 (higher gain -> lower power) from eeprom (eeprom.c) + * and interpolate here. + * + * For a given channel we get the calibrated points (piers) for it or + * -if we don't have calibration data for this specific channel- from the + * available surrounding channels we have calibration data for, after we do a + * linear interpolation between them. Then since we have our calibrated points + * for this channel, we do again a linear interpolation between them to get the + * whole curve. + * + * We finally write the Y values of the curve(s) (the PCDAC values) on hw + */ + +/** + * ath5k_fill_pwr_to_pcdac_table() - Fill Power to PCDAC table on RF5111 + * @ah: The &struct ath5k_hw + * @table_min: Minimum power (x min) + * @table_max: Maximum power (x max) + * + * No further processing is needed for RF5111, the only thing we have to + * do is fill the values below and above calibration range since eeprom data + * may not cover the entire PCDAC table. + */ +static void +ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, + s16 *table_max) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_tmp = ah->ah_txpower.tmpL[0]; + u8 pcdac_0, pcdac_n, pcdac_i, pwr_idx, i; + s16 min_pwr, max_pwr; + + /* Get table boundaries */ + min_pwr = table_min[0]; + pcdac_0 = pcdac_tmp[0]; + + max_pwr = table_max[0]; + pcdac_n = pcdac_tmp[table_max[0] - table_min[0]]; + + /* Extrapolate below minimum using pcdac_0 */ + pcdac_i = 0; + for (i = 0; i < min_pwr; i++) + pcdac_out[pcdac_i++] = pcdac_0; + + /* Copy values from pcdac_tmp */ + pwr_idx = min_pwr; + for (i = 0; pwr_idx <= max_pwr && + pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) { + pcdac_out[pcdac_i++] = pcdac_tmp[i]; + pwr_idx++; + } + + /* Extrapolate above maximum */ + while (pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE) + pcdac_out[pcdac_i++] = pcdac_n; + +} + +/** + * ath5k_combine_linear_pcdac_curves() - Combine available PCDAC Curves + * @ah: The &struct ath5k_hw + * @table_min: Minimum power (x min) + * @table_max: Maximum power (x max) + * @pdcurves: Number of pd curves + * + * Combine available XPD Curves and fill Linear Power to PCDAC table on RF5112 + * RFX112 can have up to 2 curves (one for low txpower range and one for + * higher txpower range). We need to put them both on pcdac_out and place + * them in the correct location. In case we only have one curve available + * just fit it on pcdac_out (it's supposed to cover the entire range of + * available pwr levels since it's always the higher power curve). Extrapolate + * below and above final table if needed. + */ +static void +ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, + s16 *table_max, u8 pdcurves) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_low_pwr; + u8 *pcdac_high_pwr; + u8 *pcdac_tmp; + u8 pwr; + s16 max_pwr_idx; + s16 min_pwr_idx; + s16 mid_pwr_idx = 0; + /* Edge flag turns on the 7nth bit on the PCDAC + * to declare the higher power curve (force values + * to be greater than 64). If we only have one curve + * we don't need to set this, if we have 2 curves and + * fill the table backwards this can also be used to + * switch from higher power curve to lower power curve */ + u8 edge_flag; + int i; + + /* When we have only one curve available + * that's the higher power curve. If we have + * two curves the first is the high power curve + * and the next is the low power curve. */ + if (pdcurves > 1) { + pcdac_low_pwr = ah->ah_txpower.tmpL[1]; + pcdac_high_pwr = ah->ah_txpower.tmpL[0]; + mid_pwr_idx = table_max[1] - table_min[1] - 1; + max_pwr_idx = (table_max[0] - table_min[0]) / 2; + + /* If table size goes beyond 31.5dB, keep the + * upper 31.5dB range when setting tx power. + * Note: 126 = 31.5 dB in quarter dB steps */ + if (table_max[0] - table_min[1] > 126) + min_pwr_idx = table_max[0] - 126; + else + min_pwr_idx = table_min[1]; + + /* Since we fill table backwards + * start from high power curve */ + pcdac_tmp = pcdac_high_pwr; + + edge_flag = 0x40; + } else { + pcdac_low_pwr = ah->ah_txpower.tmpL[1]; /* Zeroed */ + pcdac_high_pwr = ah->ah_txpower.tmpL[0]; + min_pwr_idx = table_min[0]; + max_pwr_idx = (table_max[0] - table_min[0]) / 2; + pcdac_tmp = pcdac_high_pwr; + edge_flag = 0; + } + + /* This is used when setting tx power*/ + ah->ah_txpower.txp_min_idx = min_pwr_idx / 2; + + /* Fill Power to PCDAC table backwards */ + pwr = max_pwr_idx; + for (i = 63; i >= 0; i--) { + /* Entering lower power range, reset + * edge flag and set pcdac_tmp to lower + * power curve.*/ + if (edge_flag == 0x40 && + (2 * pwr <= (table_max[1] - table_min[0]) || pwr == 0)) { + edge_flag = 0x00; + pcdac_tmp = pcdac_low_pwr; + pwr = mid_pwr_idx / 2; + } + + /* Don't go below 1, extrapolate below if we have + * already switched to the lower power curve -or + * we only have one curve and edge_flag is zero + * anyway */ + if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) { + while (i >= 0) { + pcdac_out[i] = pcdac_out[i + 1]; + i--; + } + break; + } + + pcdac_out[i] = pcdac_tmp[pwr] | edge_flag; + + /* Extrapolate above if pcdac is greater than + * 126 -this can happen because we OR pcdac_out + * value with edge_flag on high power curve */ + if (pcdac_out[i] > 126) + pcdac_out[i] = 126; + + /* Decrease by a 0.5dB step */ + pwr--; + } +} + +/** + * ath5k_write_pcdac_table() - Write the PCDAC values on hw + * @ah: The &struct ath5k_hw + */ +static void +ath5k_write_pcdac_table(struct ath5k_hw *ah) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + int i; + + /* + * Write TX power values + */ + for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { + ath5k_hw_reg_write(ah, + (((pcdac_out[2 * i + 0] << 8 | 0xff) & 0xffff) << 0) | + (((pcdac_out[2 * i + 1] << 8 | 0xff) & 0xffff) << 16), + AR5K_PHY_PCDAC_TXPOWER(i)); + } +} + + +/* + * Power to PDADC table functions + */ + +/** + * DOC: Power to PDADC table functions + * + * For RF2413 and later we have a Power to PDADC table (Power Detector) + * instead of a PCDAC (Power Control) and 4 pd gain curves for each + * calibrated channel. Each curve has power on x axis in 0.5 db steps and + * PDADC steps on y axis and looks like an exponential function like the + * RF5111 curve. + * + * To recreate the curves we read the points from eeprom (eeprom.c) + * and interpolate here. Note that in most cases only 2 (higher and lower) + * curves are used (like RF5112) but vendors have the opportunity to include + * all 4 curves on eeprom. The final curve (higher power) has an extra + * point for better accuracy like RF5112. + * + * The process is similar to what we do above for RF5111/5112 + */ + +/** + * ath5k_combine_pwr_to_pdadc_curves() - Combine the various PDADC curves + * @ah: The &struct ath5k_hw + * @pwr_min: Minimum power (x min) + * @pwr_max: Maximum power (x max) + * @pdcurves: Number of available curves + * + * Combine the various pd curves and create the final Power to PDADC table + * We can have up to 4 pd curves, we need to do a similar process + * as we do for RF5112. This time we don't have an edge_flag but we + * set the gain boundaries on a separate register. + */ +static void +ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah, + s16 *pwr_min, s16 *pwr_max, u8 pdcurves) +{ + u8 gain_boundaries[AR5K_EEPROM_N_PD_GAINS]; + u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u8 *pdadc_tmp; + s16 pdadc_0; + u8 pdadc_i, pdadc_n, pwr_step, pdg, max_idx, table_size; + u8 pd_gain_overlap; + + /* Note: Register value is initialized on initvals + * there is no feedback from hw. + * XXX: What about pd_gain_overlap from EEPROM ? */ + pd_gain_overlap = (u8) ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) & + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP; + + /* Create final PDADC table */ + for (pdg = 0, pdadc_i = 0; pdg < pdcurves; pdg++) { + pdadc_tmp = ah->ah_txpower.tmpL[pdg]; + + if (pdg == pdcurves - 1) + /* 2 dB boundary stretch for last + * (higher power) curve */ + gain_boundaries[pdg] = pwr_max[pdg] + 4; + else + /* Set gain boundary in the middle + * between this curve and the next one */ + gain_boundaries[pdg] = + (pwr_max[pdg] + pwr_min[pdg + 1]) / 2; + + /* Sanity check in case our 2 db stretch got out of + * range. */ + if (gain_boundaries[pdg] > AR5K_TUNE_MAX_TXPOWER) + gain_boundaries[pdg] = AR5K_TUNE_MAX_TXPOWER; + + /* For the first curve (lower power) + * start from 0 dB */ + if (pdg == 0) + pdadc_0 = 0; + else + /* For the other curves use the gain overlap */ + pdadc_0 = (gain_boundaries[pdg - 1] - pwr_min[pdg]) - + pd_gain_overlap; + + /* Force each power step to be at least 0.5 dB */ + if ((pdadc_tmp[1] - pdadc_tmp[0]) > 1) + pwr_step = pdadc_tmp[1] - pdadc_tmp[0]; + else + pwr_step = 1; + + /* If pdadc_0 is negative, we need to extrapolate + * below this pdgain by a number of pwr_steps */ + while ((pdadc_0 < 0) && (pdadc_i < 128)) { + s16 tmp = pdadc_tmp[0] + pdadc_0 * pwr_step; + pdadc_out[pdadc_i++] = (tmp < 0) ? 0 : (u8) tmp; + pdadc_0++; + } + + /* Set last pwr level, using gain boundaries */ + pdadc_n = gain_boundaries[pdg] + pd_gain_overlap - pwr_min[pdg]; + /* Limit it to be inside pwr range */ + table_size = pwr_max[pdg] - pwr_min[pdg]; + max_idx = min(pdadc_n, table_size); + + /* Fill pdadc_out table */ + while (pdadc_0 < max_idx && pdadc_i < 128) + pdadc_out[pdadc_i++] = pdadc_tmp[pdadc_0++]; + + /* Need to extrapolate above this pdgain? */ + if (pdadc_n <= max_idx) + continue; + + /* Force each power step to be at least 0.5 dB */ + if ((pdadc_tmp[table_size - 1] - pdadc_tmp[table_size - 2]) > 1) + pwr_step = pdadc_tmp[table_size - 1] - + pdadc_tmp[table_size - 2]; + else + pwr_step = 1; + + /* Extrapolate above */ + while ((pdadc_0 < (s16) pdadc_n) && + (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2)) { + s16 tmp = pdadc_tmp[table_size - 1] + + (pdadc_0 - max_idx) * pwr_step; + pdadc_out[pdadc_i++] = (tmp > 127) ? 127 : (u8) tmp; + pdadc_0++; + } + } + + while (pdg < AR5K_EEPROM_N_PD_GAINS) { + gain_boundaries[pdg] = gain_boundaries[pdg - 1]; + pdg++; + } + + while (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2) { + pdadc_out[pdadc_i] = pdadc_out[pdadc_i - 1]; + pdadc_i++; + } + + /* Set gain boundaries */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(pd_gain_overlap, + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) | + AR5K_REG_SM(gain_boundaries[0], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) | + AR5K_REG_SM(gain_boundaries[1], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) | + AR5K_REG_SM(gain_boundaries[2], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) | + AR5K_REG_SM(gain_boundaries[3], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4), + AR5K_PHY_TPC_RG5); + + /* Used for setting rate power table */ + ah->ah_txpower.txp_min_idx = pwr_min[0]; + +} + +/** + * ath5k_write_pwr_to_pdadc_table() - Write the PDADC values on hw + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + */ +static void +ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u8 *pdg_to_idx = ee->ee_pdc_to_idx[ee_mode]; + u8 pdcurves = ee->ee_pd_gains[ee_mode]; + u32 reg; + u8 i; + + /* Select the right pdgain curves */ + + /* Clear current settings */ + reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1); + reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 | + AR5K_PHY_TPC_RG1_PDGAIN_2 | + AR5K_PHY_TPC_RG1_PDGAIN_3 | + AR5K_PHY_TPC_RG1_NUM_PD_GAIN); + + /* + * Use pd_gains curve from eeprom + * + * This overrides the default setting from initvals + * in case some vendors (e.g. Zcomax) don't use the default + * curves. If we don't honor their settings we 'll get a + * 5dB (1 * gain overlap ?) drop. + */ + reg |= AR5K_REG_SM(pdcurves, AR5K_PHY_TPC_RG1_NUM_PD_GAIN); + + switch (pdcurves) { + case 3: + reg |= AR5K_REG_SM(pdg_to_idx[2], AR5K_PHY_TPC_RG1_PDGAIN_3); + fallthrough; + case 2: + reg |= AR5K_REG_SM(pdg_to_idx[1], AR5K_PHY_TPC_RG1_PDGAIN_2); + fallthrough; + case 1: + reg |= AR5K_REG_SM(pdg_to_idx[0], AR5K_PHY_TPC_RG1_PDGAIN_1); + break; + } + ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1); + + /* + * Write TX power values + */ + for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { + u32 val = get_unaligned_le32(&pdadc_out[4 * i]); + ath5k_hw_reg_write(ah, val, AR5K_PHY_PDADC_TXPOWER(i)); + } +} + + +/* + * Common code for PCDAC/PDADC tables + */ + +/** + * ath5k_setup_channel_powertable() - Set up power table for this channel + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @ee_mode: One of enum ath5k_driver_mode + * @type: One of enum ath5k_powertable_type (eeprom.h) + * + * This is the main function that uses all of the above + * to set PCDAC/PDADC table on hw for the current channel. + * This table is used for tx power calibration on the baseband, + * without it we get weird tx power levels and in some cases + * distorted spectral mask + */ +static int +ath5k_setup_channel_powertable(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + u8 ee_mode, u8 type) +{ + struct ath5k_pdgain_info *pdg_L, *pdg_R; + struct ath5k_chan_pcal_info *pcinfo_L; + struct ath5k_chan_pcal_info *pcinfo_R; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode]; + s16 table_min[AR5K_EEPROM_N_PD_GAINS]; + s16 table_max[AR5K_EEPROM_N_PD_GAINS]; + u8 *tmpL; + u8 *tmpR; + u32 target = channel->center_freq; + int pdg, i; + + /* Get surrounding freq piers for this channel */ + ath5k_get_chan_pcal_surrounding_piers(ah, channel, + &pcinfo_L, + &pcinfo_R); + + /* Loop over pd gain curves on + * surrounding freq piers by index */ + for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) { + + /* Fill curves in reverse order + * from lower power (max gain) + * to higher power. Use curve -> idx + * backmapping we did on eeprom init */ + u8 idx = pdg_curve_to_idx[pdg]; + + /* Grab the needed curves by index */ + pdg_L = &pcinfo_L->pd_curves[idx]; + pdg_R = &pcinfo_R->pd_curves[idx]; + + /* Initialize the temp tables */ + tmpL = ah->ah_txpower.tmpL[pdg]; + tmpR = ah->ah_txpower.tmpR[pdg]; + + /* Set curve's x boundaries and create + * curves so that they cover the same + * range (if we don't do that one table + * will have values on some range and the + * other one won't have any so interpolation + * will fail) */ + table_min[pdg] = min(pdg_L->pd_pwr[0], + pdg_R->pd_pwr[0]) / 2; + + table_max[pdg] = max(pdg_L->pd_pwr[pdg_L->pd_points - 1], + pdg_R->pd_pwr[pdg_R->pd_points - 1]) / 2; + + /* Now create the curves on surrounding channels + * and interpolate if needed to get the final + * curve for this gain on this channel */ + switch (type) { + case AR5K_PWRTABLE_LINEAR_PCDAC: + /* Override min/max so that we don't loose + * accuracy (don't divide by 2) */ + table_min[pdg] = min(pdg_L->pd_pwr[0], + pdg_R->pd_pwr[0]); + + table_max[pdg] = + max(pdg_L->pd_pwr[pdg_L->pd_points - 1], + pdg_R->pd_pwr[pdg_R->pd_points - 1]); + + /* Override minimum so that we don't get + * out of bounds while extrapolating + * below. Don't do this when we have 2 + * curves and we are on the high power curve + * because table_min is ok in this case */ + if (!(ee->ee_pd_gains[ee_mode] > 1 && pdg == 0)) { + + table_min[pdg] = + ath5k_get_linear_pcdac_min(pdg_L->pd_step, + pdg_R->pd_step, + pdg_L->pd_pwr, + pdg_R->pd_pwr); + + /* Don't go too low because we will + * miss the upper part of the curve. + * Note: 126 = 31.5dB (max power supported) + * in 0.25dB units */ + if (table_max[pdg] - table_min[pdg] > 126) + table_min[pdg] = table_max[pdg] - 126; + } + + fallthrough; + case AR5K_PWRTABLE_PWR_TO_PCDAC: + case AR5K_PWRTABLE_PWR_TO_PDADC: + + ath5k_create_power_curve(table_min[pdg], + table_max[pdg], + pdg_L->pd_pwr, + pdg_L->pd_step, + pdg_L->pd_points, tmpL, type); + + /* We are in a calibration + * pier, no need to interpolate + * between freq piers */ + if (pcinfo_L == pcinfo_R) + continue; + + ath5k_create_power_curve(table_min[pdg], + table_max[pdg], + pdg_R->pd_pwr, + pdg_R->pd_step, + pdg_R->pd_points, tmpR, type); + break; + default: + return -EINVAL; + } + + /* Interpolate between curves + * of surrounding freq piers to + * get the final curve for this + * pd gain. Re-use tmpL for interpolation + * output */ + for (i = 0; (i < (u16) (table_max[pdg] - table_min[pdg])) && + (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) { + tmpL[i] = (u8) ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + (s16) tmpL[i], + (s16) tmpR[i]); + } + } + + /* Now we have a set of curves for this + * channel on tmpL (x range is table_max - table_min + * and y values are tmpL[pdg][]) sorted in the same + * order as EEPROM (because we've used the backmapping). + * So for RF5112 it's from higher power to lower power + * and for RF2413 it's from lower power to higher power. + * For RF5111 we only have one curve. */ + + /* Fill min and max power levels for this + * channel by interpolating the values on + * surrounding channels to complete the dataset */ + ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + pcinfo_L->min_pwr, pcinfo_R->min_pwr); + + ah->ah_txpower.txp_max_pwr = ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + pcinfo_L->max_pwr, pcinfo_R->max_pwr); + + /* Fill PCDAC/PDADC table */ + switch (type) { + case AR5K_PWRTABLE_LINEAR_PCDAC: + /* For RF5112 we can have one or two curves + * and each curve covers a certain power lvl + * range so we need to do some more processing */ + ath5k_combine_linear_pcdac_curves(ah, table_min, table_max, + ee->ee_pd_gains[ee_mode]); + + /* Set txp.offset so that we can + * match max power value with max + * table index */ + ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2); + break; + case AR5K_PWRTABLE_PWR_TO_PCDAC: + /* We are done for RF5111 since it has only + * one curve, just fit the curve on the table */ + ath5k_fill_pwr_to_pcdac_table(ah, table_min, table_max); + + /* No rate powertable adjustment for RF5111 */ + ah->ah_txpower.txp_min_idx = 0; + ah->ah_txpower.txp_offset = 0; + break; + case AR5K_PWRTABLE_PWR_TO_PDADC: + /* Set PDADC boundaries and fill + * final PDADC table */ + ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max, + ee->ee_pd_gains[ee_mode]); + + /* Set txp.offset, note that table_min + * can be negative */ + ah->ah_txpower.txp_offset = table_min[0]; + break; + default: + return -EINVAL; + } + + ah->ah_txpower.txp_setup = true; + + return 0; +} + +/** + * ath5k_write_channel_powertable() - Set power table for current channel on hw + * @ah: The &struct ath5k_hw + * @ee_mode: One of enum ath5k_driver_mode + * @type: One of enum ath5k_powertable_type (eeprom.h) + */ +static void +ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type) +{ + if (type == AR5K_PWRTABLE_PWR_TO_PDADC) + ath5k_write_pwr_to_pdadc_table(ah, ee_mode); + else + ath5k_write_pcdac_table(ah); +} + + +/** + * DOC: Per-rate tx power setting + * + * This is the code that sets the desired tx power limit (below + * maximum) on hw for each rate (we also have TPC that sets + * power per packet type). We do that by providing an index on the + * PCDAC/PDADC table we set up above, for each rate. + * + * For now we only limit txpower based on maximum tx power + * supported by hw (what's inside rate_info) + conformance test + * limits. We need to limit this even more, based on regulatory domain + * etc to be safe. Normally this is done from above so we don't care + * here, all we care is that the tx power we set will be O.K. + * for the hw (e.g. won't create noise on PA etc). + * + * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps - + * x values) and is indexed as follows: + * rates[0] - rates[7] -> OFDM rates + * rates[8] - rates[14] -> CCK rates + * rates[15] -> XR rates (they all have the same power) + */ + +/** + * ath5k_setup_rate_powertable() - Set up rate power table for a given tx power + * @ah: The &struct ath5k_hw + * @max_pwr: The maximum tx power requested in 0.5dB steps + * @rate_info: The &struct ath5k_rate_pcal_info to fill + * @ee_mode: One of enum ath5k_driver_mode + */ +static void +ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, + struct ath5k_rate_pcal_info *rate_info, + u8 ee_mode) +{ + unsigned int i; + u16 *rates; + s16 rate_idx_scaled = 0; + + /* max_pwr is power level we got from driver/user in 0.5dB + * units, switch to 0.25dB units so we can compare */ + max_pwr *= 2; + max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max_pwr) / 2; + + /* apply rate limits */ + rates = ah->ah_txpower.txp_rates_power_table; + + /* OFDM rates 6 to 24Mb/s */ + for (i = 0; i < 5; i++) + rates[i] = min(max_pwr, rate_info->target_power_6to24); + + /* Rest OFDM rates */ + rates[5] = min(rates[0], rate_info->target_power_36); + rates[6] = min(rates[0], rate_info->target_power_48); + rates[7] = min(rates[0], rate_info->target_power_54); + + /* CCK rates */ + /* 1L */ + rates[8] = min(rates[0], rate_info->target_power_6to24); + /* 2L */ + rates[9] = min(rates[0], rate_info->target_power_36); + /* 2S */ + rates[10] = min(rates[0], rate_info->target_power_36); + /* 5L */ + rates[11] = min(rates[0], rate_info->target_power_48); + /* 5S */ + rates[12] = min(rates[0], rate_info->target_power_48); + /* 11L */ + rates[13] = min(rates[0], rate_info->target_power_54); + /* 11S */ + rates[14] = min(rates[0], rate_info->target_power_54); + + /* XR rates */ + rates[15] = min(rates[0], rate_info->target_power_6to24); + + /* CCK rates have different peak to average ratio + * so we have to tweak their power so that gainf + * correction works ok. For this we use OFDM to + * CCK delta from eeprom */ + if ((ee_mode == AR5K_EEPROM_MODE_11G) && + (ah->ah_phy_revision < AR5K_SREV_PHY_5212A)) + for (i = 8; i <= 15; i++) + rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; + + /* Save min/max and current tx power for this channel + * in 0.25dB units. + * + * Note: We use rates[0] for current tx power because + * it covers most of the rates, in most cases. It's our + * tx power limit and what the user expects to see. */ + ah->ah_txpower.txp_min_pwr = 2 * rates[7]; + ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; + + /* Set max txpower for correct OFDM operation on all rates + * -that is the txpower for 54Mbit-, it's used for the PAPD + * gain probe and it's in 0.5dB units */ + ah->ah_txpower.txp_ofdm = rates[7]; + + /* Now that we have all rates setup use table offset to + * match the power range set by user with the power indices + * on PCDAC/PDADC table */ + for (i = 0; i < 16; i++) { + rate_idx_scaled = rates[i] + ah->ah_txpower.txp_offset; + /* Don't get out of bounds */ + if (rate_idx_scaled > 63) + rate_idx_scaled = 63; + if (rate_idx_scaled < 0) + rate_idx_scaled = 0; + rates[i] = rate_idx_scaled; + } +} + + +/** + * ath5k_hw_txpower() - Set transmission power limit for a given channel + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * @txpower: Requested tx power in 0.5dB steps + * + * Combines all of the above to set the requested tx power limit + * on hw. + */ +static int +ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 txpower) +{ + struct ath5k_rate_pcal_info rate_info; + struct ieee80211_channel *curr_channel = ah->ah_current_channel; + int ee_mode; + u8 type; + int ret; + + if (txpower > AR5K_TUNE_MAX_TXPOWER) { + ATH5K_ERR(ah, "invalid tx power: %u\n", txpower); + return -EINVAL; + } + + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); + + /* Initialize TX power table */ + switch (ah->ah_radio) { + case AR5K_RF5110: + /* TODO */ + return 0; + case AR5K_RF5111: + type = AR5K_PWRTABLE_PWR_TO_PCDAC; + break; + case AR5K_RF5112: + type = AR5K_PWRTABLE_LINEAR_PCDAC; + break; + case AR5K_RF2413: + case AR5K_RF5413: + case AR5K_RF2316: + case AR5K_RF2317: + case AR5K_RF2425: + type = AR5K_PWRTABLE_PWR_TO_PDADC; + break; + default: + return -EINVAL; + } + + /* + * If we don't change channel/mode skip tx powertable calculation + * and use the cached one. + */ + if (!ah->ah_txpower.txp_setup || + (channel->hw_value != curr_channel->hw_value) || + (channel->center_freq != curr_channel->center_freq)) { + /* Reset TX power values but preserve requested + * tx power from above */ + int requested_txpower = ah->ah_txpower.txp_requested; + + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); + + /* Restore TPC setting and requested tx power */ + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + + ah->ah_txpower.txp_requested = requested_txpower; + + /* Calculate the powertable */ + ret = ath5k_setup_channel_powertable(ah, channel, + ee_mode, type); + if (ret) + return ret; + } + + /* Write table on hw */ + ath5k_write_channel_powertable(ah, ee_mode, type); + + /* Limit max power if we have a CTL available */ + ath5k_get_max_ctl_power(ah, channel); + + /* FIXME: Antenna reduction stuff */ + + /* FIXME: Limit power on turbo modes */ + + /* FIXME: TPC scale reduction */ + + /* Get surrounding channels for per-rate power table + * calibration */ + ath5k_get_rate_pcal_data(ah, channel, &rate_info); + + /* Setup rate power table */ + ath5k_setup_rate_powertable(ah, txpower, &rate_info, ee_mode); + + /* Write rate power table on hw */ + ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) | + AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) | + AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1); + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(7, 24) | + AR5K_TXPOWER_OFDM(6, 16) | AR5K_TXPOWER_OFDM(5, 8) | + AR5K_TXPOWER_OFDM(4, 0), AR5K_PHY_TXPOWER_RATE2); + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(10, 24) | + AR5K_TXPOWER_CCK(9, 16) | AR5K_TXPOWER_CCK(15, 8) | + AR5K_TXPOWER_CCK(8, 0), AR5K_PHY_TXPOWER_RATE3); + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(14, 24) | + AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) | + AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4); + + /* FIXME: TPC support */ + if (ah->ah_txpower.txp_tpc) { + ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE | + AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + + ath5k_hw_reg_write(ah, + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) | + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) | + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP), + AR5K_TPC); + } else { + ath5k_hw_reg_write(ah, AR5K_TUNE_MAX_TXPOWER, + AR5K_PHY_TXPOWER_RATE_MAX); + } + + return 0; +} + +/** + * ath5k_hw_set_txpower_limit() - Set txpower limit for the current channel + * @ah: The &struct ath5k_hw + * @txpower: The requested tx power limit in 0.5dB steps + * + * This function provides access to ath5k_hw_txpower to the driver in + * case user or an application changes it while PHY is running. + */ +int +ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower) +{ + ATH5K_DBG(ah, ATH5K_DEBUG_TXPOWER, + "changing txpower to %d\n", txpower); + + return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower); +} + + +/*************\ + Init function +\*************/ + +/** + * ath5k_hw_phy_init() - Initialize PHY + * @ah: The &struct ath5k_hw + * @channel: The @struct ieee80211_channel + * @mode: One of enum ath5k_driver_mode + * @fast: Try a fast channel switch instead + * + * This is the main function used during reset to initialize PHY + * or do a fast channel change if possible. + * + * NOTE: Do not call this one from the driver, it assumes PHY is in a + * warm reset state ! + */ +int +ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 mode, bool fast) +{ + struct ieee80211_channel *curr_channel; + int ret, i; + u32 phy_tst1; + ret = 0; + + /* + * Sanity check for fast flag + * Don't try fast channel change when changing modulation + * mode/band. We check for chip compatibility on + * ath5k_hw_reset. + */ + curr_channel = ah->ah_current_channel; + if (fast && (channel->hw_value != curr_channel->hw_value)) + return -EINVAL; + + /* + * On fast channel change we only set the synth parameters + * while PHY is running, enable calibration and skip the rest. + */ + if (fast) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, + AR5K_PHY_RFBUS_REQ_REQUEST); + for (i = 0; i < 100; i++) { + if (ath5k_hw_reg_read(ah, AR5K_PHY_RFBUS_GRANT)) + break; + udelay(5); + } + /* Failed */ + if (i >= 100) + return -EIO; + + /* Set channel and wait for synth */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + ath5k_hw_wait_for_synth(ah, channel); + } + + /* + * Set TX power + * + * Note: We need to do that before we set + * RF buffer settings on 5211/5212+ so that we + * properly set curve indices. + */ + ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_requested ? + ah->ah_txpower.txp_requested * 2 : + AR5K_TUNE_MAX_TXPOWER); + if (ret) + return ret; + + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value != AR5K_MODE_11B) { + + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + + /* Spur info is available only from EEPROM versions + * greater than 5.3, but the EEPROM routines will use + * static values for older versions */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424) + ath5k_hw_set_spur_mitigation_filter(ah, + channel); + } + + /* If we used fast channel switching + * we are done, release RF bus and + * fire up NF calibration. + * + * Note: Only NF calibration due to + * channel change, not AGC calibration + * since AGC is still running ! + */ + if (fast) { + /* + * Release RF Bus grant + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, + AR5K_PHY_RFBUS_REQ_REQUEST); + + /* + * Start NF calibration + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF); + + return ret; + } + + /* + * For 5210 we do all initialization using + * initvals, so we don't have to modify + * any settings (5210 also only supports + * a/aturbo modes) + */ + if (ah->ah_version != AR5K_AR5210) { + + /* + * Write initial RF gain settings + * This should work for both 5111/5112 + */ + ret = ath5k_hw_rfgain_init(ah, channel->band); + if (ret) + return ret; + + usleep_range(1000, 1500); + + /* + * Write RF buffer + */ + ret = ath5k_hw_rfregs_init(ah, channel, mode); + if (ret) + return ret; + + /*Enable/disable 802.11b mode on 5111 + (enable 2111 frequency converter + CCK)*/ + if (ah->ah_radio == AR5K_RF5111) { + if (mode == AR5K_MODE_11B) + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + } + + } else if (ah->ah_version == AR5K_AR5210) { + usleep_range(1000, 1500); + /* Disable phy and wait */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + usleep_range(1000, 1500); + } + + /* Set channel on PHY */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + /* + * Enable the PHY and wait until completion + * This includes BaseBand and Synthesizer + * activation. + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + + ath5k_hw_wait_for_synth(ah, channel); + + /* + * Perform ADC test to see if baseband is ready + * Set tx hold and check adc test register + */ + phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + usleep_range(200, 250); + } + ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); + + /* + * Start automatic gain control calibration + * + * During AGC calibration RX path is re-routed to + * a power detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), which doesn't + * interrupt rx path. + * + * While rx path is re-routed to the power detector we also + * start a noise floor calibration to measure the + * card's noise floor (the noise we measure when we are not + * transmitting or receiving anything). + * + * If we are in a noisy environment, AGC calibration may time + * out and/or noise floor calibration might timeout. + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF); + + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_iq_cal_needed = false; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_iq_cal_needed = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ + if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, false)) { + ATH5K_ERR(ah, "gain calibration timeout (%uMHz)\n", + channel->center_freq); + } + + /* Restore antenna mode */ + ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode); + + return ret; +} diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c new file mode 100644 index 000000000..147947f63 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/qcu.c @@ -0,0 +1,729 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/********************************************\ +Queue Control Unit, DCF Control Unit Functions +\********************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include <linux/log2.h> + +/** + * DOC: Queue Control Unit (QCU)/DCF Control Unit (DCU) functions + * + * Here we setup parameters for the 12 available TX queues. Note that + * on the various registers we can usually only map the first 10 of them so + * basically we have 10 queues to play with. Each queue has a matching + * QCU that controls when the queue will get triggered and multiple QCUs + * can be mapped to a single DCU that controls the various DFS parameters + * for the various queues. In our setup we have a 1:1 mapping between QCUs + * and DCUs allowing us to have different DFS settings for each queue. + * + * When a frame goes into a TX queue, QCU decides when it'll trigger a + * transmission based on various criteria (such as how many data we have inside + * it's buffer or -if it's a beacon queue- if it's time to fire up the queue + * based on TSF etc), DCU adds backoff, IFSes etc and then a scheduler + * (arbitrator) decides the priority of each QCU based on it's configuration + * (e.g. beacons are always transmitted when they leave DCU bypassing all other + * frames from other queues waiting to be transmitted). After a frame leaves + * the DCU it goes to PCU for further processing and then to PHY for + * the actual transmission. + */ + + +/******************\ +* Helper functions * +\******************/ + +/** + * ath5k_hw_num_tx_pending() - Get number of pending frames for a given queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + */ +u32 +ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) +{ + u32 pending; + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return false; + + /* XXX: How about AR5K_CFG_TXCNT ? */ + if (ah->ah_version == AR5K_AR5210) + return false; + + pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue)); + pending &= AR5K_QCU_STS_FRMPENDCNT; + + /* It's possible to have no frames pending even if TXE + * is set. To indicate that q has not stopped return + * true */ + if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return true; + + return pending; +} + +/** + * ath5k_hw_release_tx_queue() - Set a transmit queue inactive + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + */ +void +ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) + return; + + /* This queue will be skipped in further operations */ + ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; + /*For SIMR setup*/ + AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); +} + +/** + * ath5k_cw_validate() - Make sure the given cw is valid + * @cw_req: The contention window value to check + * + * Make sure cw is a power of 2 minus 1 and smaller than 1024 + */ +static u16 +ath5k_cw_validate(u16 cw_req) +{ + cw_req = min(cw_req, (u16)1023); + + /* Check if cw_req + 1 a power of 2 */ + if (is_power_of_2(cw_req + 1)) + return cw_req; + + /* Check if cw_req is a power of 2 */ + if (is_power_of_2(cw_req)) + return cw_req - 1; + + /* If none of the above is correct + * find the closest power of 2 */ + cw_req = (u16) roundup_pow_of_two(cw_req) - 1; + + return cw_req; +} + +/** + * ath5k_hw_get_tx_queueprops() - Get properties for a transmit queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * @queue_info: The &struct ath5k_txq_info to fill + */ +int +ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, + struct ath5k_txq_info *queue_info) +{ + memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); + return 0; +} + +/** + * ath5k_hw_set_tx_queueprops() - Set properties for a transmit queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * @qinfo: The &struct ath5k_txq_info to use + * + * Returns 0 on success or -EIO if queue is inactive + */ +int +ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *qinfo) +{ + struct ath5k_txq_info *qi; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + qi = &ah->ah_txq[queue]; + + if (qi->tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + /* copy and validate values */ + qi->tqi_type = qinfo->tqi_type; + qi->tqi_subtype = qinfo->tqi_subtype; + qi->tqi_flags = qinfo->tqi_flags; + /* + * According to the docs: Although the AIFS field is 8 bit wide, + * the maximum supported value is 0xFC. Setting it higher than that + * will cause the DCU to hang. + */ + qi->tqi_aifs = min(qinfo->tqi_aifs, (u8)0xFC); + qi->tqi_cw_min = ath5k_cw_validate(qinfo->tqi_cw_min); + qi->tqi_cw_max = ath5k_cw_validate(qinfo->tqi_cw_max); + qi->tqi_cbr_period = qinfo->tqi_cbr_period; + qi->tqi_cbr_overflow_limit = qinfo->tqi_cbr_overflow_limit; + qi->tqi_burst_time = qinfo->tqi_burst_time; + qi->tqi_ready_time = qinfo->tqi_ready_time; + + /*XXX: Is this supported on 5210 ?*/ + /*XXX: Is this correct for AR5K_WME_AC_VI,VO ???*/ + if ((qinfo->tqi_type == AR5K_TX_QUEUE_DATA && + ((qinfo->tqi_subtype == AR5K_WME_AC_VI) || + (qinfo->tqi_subtype == AR5K_WME_AC_VO))) || + qinfo->tqi_type == AR5K_TX_QUEUE_UAPSD) + qi->tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; + + return 0; +} + +/** + * ath5k_hw_setup_tx_queue() - Initialize a transmit queue + * @ah: The &struct ath5k_hw + * @queue_type: One of enum ath5k_tx_queue + * @queue_info: The &struct ath5k_txq_info to use + * + * Returns 0 on success, -EINVAL on invalid arguments + */ +int +ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info) +{ + unsigned int queue; + int ret; + + /* + * Get queue by type + */ + /* 5210 only has 2 queues */ + if (ah->ah_capabilities.cap_queues.q_tx_num == 2) { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; + break; + default: + return -EINVAL; + } + } else { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + queue = queue_info->tqi_subtype; + break; + case AR5K_TX_QUEUE_UAPSD: + queue = AR5K_TX_QUEUE_ID_UAPSD; + break; + case AR5K_TX_QUEUE_BEACON: + queue = AR5K_TX_QUEUE_ID_BEACON; + break; + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_CAB; + break; + default: + return -EINVAL; + } + } + + /* + * Setup internal queue structure + */ + memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); + ah->ah_txq[queue].tqi_type = queue_type; + + if (queue_info != NULL) { + queue_info->tqi_type = queue_type; + ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info); + if (ret) + return ret; + } + + /* + * We use ah_txq_status to hold a temp value for + * the Secondary interrupt mask registers on 5211+ + * check out ath5k_hw_reset_tx_queue + */ + AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); + + return queue; +} + + +/*******************************\ +* Single QCU/DCU initialization * +\*******************************/ + +/** + * ath5k_hw_set_tx_retry_limits() - Set tx retry limits on DCU + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * + * This function is used when initializing a queue, to set + * retry limits based on ah->ah_retry_* and the chipset used. + */ +void +ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, + unsigned int queue) +{ + /* Single data queue on AR5210 */ + if (ah->ah_version == AR5K_AR5210) { + struct ath5k_txq_info *tq = &ah->ah_txq[queue]; + + if (queue > 0) + return; + + ath5k_hw_reg_write(ah, + (tq->tqi_cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) + | AR5K_REG_SM(ah->ah_retry_long, + AR5K_NODCU_RETRY_LMT_SLG_RETRY) + | AR5K_REG_SM(ah->ah_retry_short, + AR5K_NODCU_RETRY_LMT_SSH_RETRY) + | AR5K_REG_SM(ah->ah_retry_long, + AR5K_NODCU_RETRY_LMT_LG_RETRY) + | AR5K_REG_SM(ah->ah_retry_short, + AR5K_NODCU_RETRY_LMT_SH_RETRY), + AR5K_NODCU_RETRY_LMT); + /* DCU on AR5211+ */ + } else { + ath5k_hw_reg_write(ah, + AR5K_REG_SM(ah->ah_retry_long, + AR5K_DCU_RETRY_LMT_RTS) + | AR5K_REG_SM(ah->ah_retry_long, + AR5K_DCU_RETRY_LMT_STA_RTS) + | AR5K_REG_SM(max(ah->ah_retry_long, ah->ah_retry_short), + AR5K_DCU_RETRY_LMT_STA_DATA), + AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); + } +} + +/** + * ath5k_hw_reset_tx_queue() - Initialize a single hw queue + * @ah: The &struct ath5k_hw + * @queue: One of enum ath5k_tx_queue_id + * + * Set DCF properties for the given transmit queue on DCU + * and configures all queue-specific parameters. + */ +int +ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + struct ath5k_txq_info *tq = &ah->ah_txq[queue]; + + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Skip if queue inactive or if we are on AR5210 + * that doesn't have QCU/DCU */ + if ((ah->ah_version == AR5K_AR5210) || + (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)) + return 0; + + /* + * Set contention window (cw_min/cw_max) + * and arbitrated interframe space (aifs)... + */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(tq->tqi_cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | + AR5K_REG_SM(tq->tqi_cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | + AR5K_REG_SM(tq->tqi_aifs, AR5K_DCU_LCL_IFS_AIFS), + AR5K_QUEUE_DFS_LOCAL_IFS(queue)); + + /* + * Set tx retry limits for this queue + */ + ath5k_hw_set_tx_retry_limits(ah, queue); + + + /* + * Set misc registers + */ + + /* Enable DCU to wait for next fragment from QCU */ + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + AR5K_DCU_MISC_FRAG_WAIT); + + /* On Maui and Spirit use the global seqnum on DCU */ + if (ah->ah_mac_version < AR5K_SREV_AR5211) + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + AR5K_DCU_MISC_SEQNUM_CTL); + + /* Constant bit rate period */ + if (tq->tqi_cbr_period) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, + AR5K_QCU_CBRCFG_INTVAL) | + AR5K_REG_SM(tq->tqi_cbr_overflow_limit, + AR5K_QCU_CBRCFG_ORN_THRES), + AR5K_QUEUE_CBRCFG(queue)); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_CBR); + + if (tq->tqi_cbr_overflow_limit) + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBR_THRES_ENABLE); + } + + /* Ready time interval */ + if (tq->tqi_ready_time && (tq->tqi_type != AR5K_TX_QUEUE_CAB)) + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, + AR5K_QCU_RDYTIMECFG_INTVAL) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + + if (tq->tqi_burst_time) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, + AR5K_DCU_CHAN_TIME_DUR) | + AR5K_DCU_CHAN_TIME_ENABLE, + AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_RDY_VEOL_POLICY); + } + + /* Enable/disable Post frame backoff */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, + AR5K_QUEUE_DFS_MISC(queue)); + + /* Enable/disable fragmentation burst backoff */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, + AR5K_QUEUE_DFS_MISC(queue)); + + /* + * Set registers by queue type + */ + switch (tq->tqi_type) { + case AR5K_TX_QUEUE_BEACON: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP_BCN_DIS | + AR5K_QCU_MISC_BCN_ENABLE); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S) | + AR5K_DCU_MISC_ARBLOCK_IGNORE | + AR5K_DCU_MISC_POST_FR_BKOFF_DIS | + AR5K_DCU_MISC_BCN_ENABLE); + break; + + case AR5K_TX_QUEUE_CAB: + /* XXX: use BCN_SENT_GT, if we can figure out how */ + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP_DIS | + AR5K_QCU_MISC_CBREXP_BCN_DIS); + + ath5k_hw_reg_write(ah, ((tq->tqi_ready_time - + (AR5K_TUNE_SW_BEACON_RESP - + AR5K_TUNE_DMA_BEACON_RESP) - + AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S)); + break; + + case AR5K_TX_QUEUE_UAPSD: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBREXP_DIS); + break; + + case AR5K_TX_QUEUE_DATA: + default: + break; + } + + /* TODO: Handle frame compression */ + + /* + * Enable interrupts for this tx queue + * in the secondary interrupt mask registers + */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue); + + /* Update secondary interrupt mask registers */ + + /* Filter out inactive queues */ + ah->ah_txq_imr_txok &= ah->ah_txq_status; + ah->ah_txq_imr_txerr &= ah->ah_txq_status; + ah->ah_txq_imr_txurn &= ah->ah_txq_status; + ah->ah_txq_imr_txdesc &= ah->ah_txq_status; + ah->ah_txq_imr_txeol &= ah->ah_txq_status; + ah->ah_txq_imr_cbrorn &= ah->ah_txq_status; + ah->ah_txq_imr_cbrurn &= ah->ah_txq_status; + ah->ah_txq_imr_qtrig &= ah->ah_txq_status; + ah->ah_txq_imr_nofrm &= ah->ah_txq_status; + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, + AR5K_SIMR0_QCU_TXOK) | + AR5K_REG_SM(ah->ah_txq_imr_txdesc, + AR5K_SIMR0_QCU_TXDESC), + AR5K_SIMR0); + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, + AR5K_SIMR1_QCU_TXERR) | + AR5K_REG_SM(ah->ah_txq_imr_txeol, + AR5K_SIMR1_QCU_TXEOL), + AR5K_SIMR1); + + /* Update SIMR2 but don't overwrite rest simr2 settings */ + AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN); + AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, + AR5K_REG_SM(ah->ah_txq_imr_txurn, + AR5K_SIMR2_QCU_TXURN)); + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn, + AR5K_SIMR3_QCBRORN) | + AR5K_REG_SM(ah->ah_txq_imr_cbrurn, + AR5K_SIMR3_QCBRURN), + AR5K_SIMR3); + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig, + AR5K_SIMR4_QTRIG), AR5K_SIMR4); + + /* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */ + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm, + AR5K_TXNOFRM_QCU), AR5K_TXNOFRM); + + /* No queue has TXNOFRM enabled, disable the interrupt + * by setting AR5K_TXNOFRM to zero */ + if (ah->ah_txq_imr_nofrm == 0) + ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM); + + /* Set QCU mask for this DCU to save power */ + AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(queue), queue); + + return 0; +} + + +/**************************\ +* Global QCU/DCU functions * +\**************************/ + +/** + * ath5k_hw_set_ifs_intervals() - Set global inter-frame spaces on DCU + * @ah: The &struct ath5k_hw + * @slot_time: Slot time in us + * + * Sets the global IFS intervals on DCU (also works on AR5210) for + * the given slot time and the current bwmode. + */ +int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; + enum nl80211_band band; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + u32 ack_tx_time, eifs, eifs_clock, sifs, sifs_clock; + u32 slot_time_clock = ath5k_hw_htoclock(ah, slot_time); + u32 rate_flags, i; + + if (slot_time < 6 || slot_time_clock > AR5K_SLOT_TIME_MAX) + return -EINVAL; + + sifs = ath5k_hw_get_default_sifs(ah); + sifs_clock = ath5k_hw_htoclock(ah, sifs - 2); + + /* EIFS + * Txtime of ack at lowest rate + SIFS + DIFS + * (DIFS = SIFS + 2 * Slot time) + * + * Note: HAL has some predefined values for EIFS + * Turbo: (37 + 2 * 6) + * Default: (74 + 2 * 9) + * Half: (149 + 2 * 13) + * Quarter: (298 + 2 * 21) + * + * (74 + 2 * 6) for AR5210 default and turbo ! + * + * According to the formula we have + * ack_tx_time = 25 for turbo and + * ack_tx_time = 42.5 * clock multiplier + * for default/half/quarter. + * + * This can't be right, 42 is what we would get + * from ath5k_hw_get_frame_dur_for_bwmode or + * ieee80211_generic_frame_duration for zero frame + * length and without SIFS ! + * + * Also we have different lowest rate for 802.11a + */ + if (channel->band == NL80211_BAND_5GHZ) + band = NL80211_BAND_5GHZ; + else + band = NL80211_BAND_2GHZ; + + switch (ah->ah_bwmode) { + case AR5K_BWMODE_5MHZ: + rate_flags = IEEE80211_RATE_SUPPORTS_5MHZ; + break; + case AR5K_BWMODE_10MHZ: + rate_flags = IEEE80211_RATE_SUPPORTS_10MHZ; + break; + default: + rate_flags = 0; + break; + } + sband = &ah->sbands[band]; + rate = NULL; + for (i = 0; i < sband->n_bitrates; i++) { + if ((rate_flags & sband->bitrates[i].flags) != rate_flags) + continue; + rate = &sband->bitrates[i]; + break; + } + if (WARN_ON(!rate)) + return -EINVAL; + + ack_tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, false); + + /* ack_tx_time includes an SIFS already */ + eifs = ack_tx_time + sifs + 2 * slot_time; + eifs_clock = ath5k_hw_htoclock(ah, eifs); + + /* Set IFS settings on AR5210 */ + if (ah->ah_version == AR5K_AR5210) { + u32 pifs, pifs_clock, difs, difs_clock; + + /* Set slot time */ + ath5k_hw_reg_write(ah, slot_time_clock, AR5K_SLOT_TIME); + + /* Set EIFS */ + eifs_clock = AR5K_REG_SM(eifs_clock, AR5K_IFS1_EIFS); + + /* PIFS = Slot time + SIFS */ + pifs = slot_time + sifs; + pifs_clock = ath5k_hw_htoclock(ah, pifs); + pifs_clock = AR5K_REG_SM(pifs_clock, AR5K_IFS1_PIFS); + + /* DIFS = SIFS + 2 * Slot time */ + difs = sifs + 2 * slot_time; + difs_clock = ath5k_hw_htoclock(ah, difs); + + /* Set SIFS/DIFS */ + ath5k_hw_reg_write(ah, (difs_clock << + AR5K_IFS0_DIFS_S) | sifs_clock, + AR5K_IFS0); + + /* Set PIFS/EIFS and preserve AR5K_INIT_CARR_SENSE_EN */ + ath5k_hw_reg_write(ah, pifs_clock | eifs_clock | + (AR5K_INIT_CARR_SENSE_EN << AR5K_IFS1_CS_EN_S), + AR5K_IFS1); + + return 0; + } + + /* Set IFS slot time */ + ath5k_hw_reg_write(ah, slot_time_clock, AR5K_DCU_GBL_IFS_SLOT); + + /* Set EIFS interval */ + ath5k_hw_reg_write(ah, eifs_clock, AR5K_DCU_GBL_IFS_EIFS); + + /* Set SIFS interval in usecs */ + AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC, + AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC, + sifs); + + /* Set SIFS interval in clock cycles */ + ath5k_hw_reg_write(ah, sifs_clock, AR5K_DCU_GBL_IFS_SIFS); + + return 0; +} + + +/** + * ath5k_hw_init_queues() - Initialize tx queues + * @ah: The &struct ath5k_hw + * + * Initializes all tx queues based on information on + * ah->ah_txq* set by the driver + */ +int +ath5k_hw_init_queues(struct ath5k_hw *ah) +{ + int i, ret; + + /* TODO: HW Compression support for data queues */ + /* TODO: Burst prefetch for data queues */ + + /* + * Reset queues and start beacon timers at the end of the reset routine + * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping + * Note: If we want we can assign multiple qcus on one dcu. + */ + if (ah->ah_version != AR5K_AR5210) + for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { + ret = ath5k_hw_reset_tx_queue(ah, i); + if (ret) { + ATH5K_ERR(ah, + "failed to reset TX queue #%d\n", i); + return ret; + } + } + else + /* No QCU/DCU on AR5210, just set tx + * retry limits. We set IFS parameters + * on ath5k_hw_set_ifs_intervals */ + ath5k_hw_set_tx_retry_limits(ah, 0); + + /* Set the turbo flag when operating on 40MHz */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) + AR5K_REG_ENABLE_BITS(ah, AR5K_DCU_GBL_IFS_MISC, + AR5K_DCU_GBL_IFS_MISC_TURBO_MODE); + + /* If we didn't set IFS timings through + * ath5k_hw_set_coverage_class make sure + * we set them here */ + if (!ah->ah_coverage_class) { + unsigned int slot_time = ath5k_hw_get_default_slottime(ah); + ath5k_hw_set_ifs_intervals(ah, slot_time); + } + + return 0; +} diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h new file mode 100644 index 000000000..0ea1608b4 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -0,0 +1,2604 @@ +/* + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k + * maintained by Reyk Floeter + * + * I tried to document those registers by looking at ar5k code, some + * 802.11 (802.11e mostly) papers and by reading various public available + * Atheros presentations and papers like these: + * + * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf + * + * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf + * + * This file also contains register values found on a memory dump of + * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal + * released by Atheros and on various debug messages found on the net. + */ + +#include "../reg.h" + +/*====MAC DMA REGISTERS====*/ + +/* + * AR5210-Specific TXDP registers + * 5210 has only 2 transmit queues so no DCU/QCU, just + * 2 transmit descriptor pointers... + */ +#define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */ +#define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */ + +/* + * Mac Control Register + */ +#define AR5K_CR 0x0008 /* Register Address */ +#define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */ +#define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */ +#define AR5K_CR_RXE 0x00000004 /* RX Enable */ +#define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */ +#define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */ +#define AR5K_CR_RXD 0x00000020 /* RX Disable */ +#define AR5K_CR_SWI 0x00000040 /* Software Interrupt */ + +/* + * RX Descriptor Pointer register + */ +#define AR5K_RXDP 0x000c + +/* + * Configuration and status register + */ +#define AR5K_CFG 0x0014 /* Register Address */ +#define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */ +#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */ +#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ +#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ +#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ +#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ +#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ +#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ +#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ +#define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */ +#define AR5K_CFG_TXCNT_S 11 +#define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */ +#define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */ +#define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */ +#define AR5K_CFG_PCI_THRES_S 17 + +/* + * Interrupt enable register + */ +#define AR5K_IER 0x0024 /* Register Address */ +#define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */ +#define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */ + + +/* + * 0x0028 is Beacon Control Register on 5210 + * and first RTS duration register on 5211 + */ + +/* + * Beacon control register [5210] + */ +#define AR5K_BCR 0x0028 /* Register Address */ +#define AR5K_BCR_AP 0x00000000 /* AP mode */ +#define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */ +#define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */ +#define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */ +#define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */ +#define AR5K_BCR_BCGET 0x00000010 + +/* + * First RTS duration register [5211] + */ +#define AR5K_RTSD0 0x0028 /* Register Address */ +#define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */ +#define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */ +#define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/ +#define AR5K_RTSD0_9_S 8 +#define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/ +#define AR5K_RTSD0_12_S 16 +#define AR5K_RTSD0_18 0xff000000 /* 16Mb*/ +#define AR5K_RTSD0_18_S 24 + + +/* + * 0x002c is Beacon Status Register on 5210 + * and second RTS duration register on 5211 + */ + +/* + * Beacon status register [5210] + * + * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR + * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning + * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). + * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i + * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what + * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. + */ +#define AR5K_BSR 0x002c /* Register Address */ +#define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */ +#define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */ +#define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */ +#define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */ +#define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */ +#define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */ +#define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */ +#define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */ +#define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */ +#define AR5K_BSR_SWBA_CNT 0x00ff0000 + +/* + * Second RTS duration register [5211] + */ +#define AR5K_RTSD1 0x002c /* Register Address */ +#define AR5K_RTSD1_24 0x000000ff /* 24Mb */ +#define AR5K_RTSD1_24_S 0 +#define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */ +#define AR5K_RTSD1_36_S 8 +#define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */ +#define AR5K_RTSD1_48_S 16 +#define AR5K_RTSD1_54 0xff000000 /* 54Mb */ +#define AR5K_RTSD1_54_S 24 + + +/* + * Transmit configuration register + */ +#define AR5K_TXCFG 0x0030 /* Register Address */ +#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */ +#define AR5K_TXCFG_SDMAMR_S 0 +#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ +#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ +#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */ +#define AR5K_TXCFG_TXFULL_S 4 +#define AR5K_TXCFG_TXFULL_0B 0x00000000 +#define AR5K_TXCFG_TXFULL_64B 0x00000010 +#define AR5K_TXCFG_TXFULL_128B 0x00000020 +#define AR5K_TXCFG_TXFULL_192B 0x00000030 +#define AR5K_TXCFG_TXFULL_256B 0x00000040 +#define AR5K_TXCFG_TXCONT_EN 0x00000080 +#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ +#define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */ +#define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */ +#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */ +#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ +#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ +#define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */ +#define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */ +#define AR5K_TXCFG_DCU_DBL_BUF_DIS 0x00008000 /* Disable double buffering on DCU */ +#define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */ + +/* + * Receive configuration register + */ +#define AR5K_RXCFG 0x0034 /* Register Address */ +#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */ +#define AR5K_RXCFG_SDMAMW_S 0 +#define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */ +#define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */ +#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */ +#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */ +#define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */ + +/* + * Receive jumbo descriptor last address register + * Only found in 5211 (?) + */ +#define AR5K_RXJLA 0x0038 + +/* + * MIB control register + */ +#define AR5K_MIBC 0x0040 /* Register Address */ +#define AR5K_MIBC_COW 0x00000001 /* Counter Overflow Warning */ +#define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */ +#define AR5K_MIBC_CMC 0x00000004 /* Clear MIB Counters */ +#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe, increment all */ + +/* + * Timeout prescale register + */ +#define AR5K_TOPS 0x0044 +#define AR5K_TOPS_M 0x0000ffff + +/* + * Receive timeout register (no frame received) + */ +#define AR5K_RXNOFRM 0x0048 +#define AR5K_RXNOFRM_M 0x000003ff + +/* + * Transmit timeout register (no frame sent) + */ +#define AR5K_TXNOFRM 0x004c +#define AR5K_TXNOFRM_M 0x000003ff +#define AR5K_TXNOFRM_QCU 0x000ffc00 +#define AR5K_TXNOFRM_QCU_S 10 + +/* + * Receive frame gap timeout register + */ +#define AR5K_RPGTO 0x0050 +#define AR5K_RPGTO_M 0x000003ff + +/* + * Receive frame count limit register + */ +#define AR5K_RFCNT 0x0054 +#define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */ +#define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */ + +/* + * Misc settings register + * (reserved0-3) + */ +#define AR5K_MISC 0x0058 /* Register Address */ +#define AR5K_MISC_DMA_OBS_M 0x000001e0 +#define AR5K_MISC_DMA_OBS_S 5 +#define AR5K_MISC_MISC_OBS_M 0x00000e00 +#define AR5K_MISC_MISC_OBS_S 9 +#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000 +#define AR5K_MISC_MAC_OBS_LSB_S 12 +#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000 +#define AR5K_MISC_MAC_OBS_MSB_S 15 +#define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */ +#define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */ + +/* + * QCU/DCU clock gating register (5311) + * (reserved4-5) + */ +#define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */ +#define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */ +#define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */ + +/* + * Interrupt Status Registers + * + * For 5210 there is only one status register but for + * 5211/5212 we have one primary and 4 secondary registers. + * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212. + * Most of these bits are common for all chipsets. + * + * NOTE: On 5211+ TXOK, TXDESC, TXERR, TXEOL and TXURN contain + * the logical OR from per-queue interrupt bits found on SISR registers + * (see below). + */ +#define AR5K_ISR 0x001c /* Register Address [5210] */ +#define AR5K_PISR 0x0080 /* Register Address [5211+] */ +#define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */ +#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ +#define AR5K_ISR_RXERR 0x00000004 /* Receive error */ +#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ +#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ +#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ +#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */ +#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ +#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ +#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) + * NOTE: We don't have per-queue info for this + * one, but we can enable it per-queue through + * TXNOFRM_QCU field on TXNOFRM register */ +#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ +#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ +#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ +#define AR5K_ISR_SWI 0x00002000 /* Software interrupt */ +#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ +#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ +#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ +#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ +#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ +#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] + * 'or' of MCABT, SSERR, DPERR from SISR2 */ +#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ +#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ +#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ +#define AR5K_ISR_DPERR 0x00400000 /* Bus parity error [5210] */ +#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ +#define AR5K_ISR_TIM 0x00800000 /* [5211+] */ +#define AR5K_ISR_BCNMISC 0x00800000 /* Misc beacon related interrupt + * 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + * CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ +#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ +#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ +#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ +#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ + +#define AR5K_ISR_BITS_FROM_SISRS (AR5K_ISR_TXOK | AR5K_ISR_TXDESC |\ + AR5K_ISR_TXERR | AR5K_ISR_TXEOL |\ + AR5K_ISR_TXURN | AR5K_ISR_HIUERR |\ + AR5K_ISR_BCNMISC | AR5K_ISR_QCBRORN |\ + AR5K_ISR_QCBRURN | AR5K_ISR_QTRIG) + +/* + * Secondary status registers [5211+] (0 - 4) + * + * These give the status for each QCU, only QCUs 0-9 are + * represented. + */ +#define AR5K_SISR0 0x0084 /* Register Address [5211+] */ +#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ +#define AR5K_SISR0_QCU_TXOK_S 0 +#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ +#define AR5K_SISR0_QCU_TXDESC_S 16 + +#define AR5K_SISR1 0x0088 /* Register Address [5211+] */ +#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ +#define AR5K_SISR1_QCU_TXERR_S 0 +#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ +#define AR5K_SISR1_QCU_TXEOL_S 16 + +#define AR5K_SISR2 0x008c /* Register Address [5211+] */ +#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ +#define AR5K_SISR2_QCU_TXURN_S 0 +#define AR5K_SISR2_MCABT 0x00010000 /* Master Cycle Abort */ +#define AR5K_SISR2_SSERR 0x00020000 /* Signaled System Error */ +#define AR5K_SISR2_DPERR 0x00040000 /* Bus parity error */ +#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ +#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ +#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ +#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ +#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ +#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ +#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF Out of range */ + +#define AR5K_SISR3 0x0090 /* Register Address [5211+] */ +#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ +#define AR5K_SISR3_QCBRORN_S 0 +#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ +#define AR5K_SISR3_QCBRURN_S 16 + +#define AR5K_SISR4 0x0094 /* Register Address [5211+] */ +#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */ +#define AR5K_SISR4_QTRIG_S 0 + +/* + * Shadow read-and-clear interrupt status registers [5211+] + */ +#define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */ +#define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */ +#define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */ +#define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */ +#define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */ +#define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */ + +/* + * Interrupt Mask Registers + * + * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary + * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. + */ +#define AR5K_IMR 0x0020 /* Register Address [5210] */ +#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ +#define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/ +#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ +#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ +#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ +#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ +#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ +#define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/ +#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ +#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ +#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/ +#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ +#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ +#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ +#define AR5K_IMR_SWI 0x00002000 /* Software interrupt */ +#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ +#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ +#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ +#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ +#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ +#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ +#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ +#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ +#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ +#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ +#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ +#define AR5K_IMR_TIM 0x00800000 /* [5211+] */ +#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ +#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ +#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */ +#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */ +#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ + +/* + * Secondary interrupt mask registers [5211+] (0 - 4) + */ +#define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */ +#define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ +#define AR5K_SIMR0_QCU_TXOK_S 0 +#define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ +#define AR5K_SIMR0_QCU_TXDESC_S 16 + +#define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */ +#define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ +#define AR5K_SIMR1_QCU_TXERR_S 0 +#define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ +#define AR5K_SIMR1_QCU_TXEOL_S 16 + +#define AR5K_SIMR2 0x00ac /* Register Address [5211+] */ +#define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ +#define AR5K_SIMR2_QCU_TXURN_S 0 +#define AR5K_SIMR2_MCABT 0x00010000 /* Master Cycle Abort */ +#define AR5K_SIMR2_SSERR 0x00020000 /* Signaled System Error */ +#define AR5K_SIMR2_DPERR 0x00040000 /* Bus parity error */ +#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ +#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ +#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ +#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ +#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ +#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ +#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */ + +#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ +#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ +#define AR5K_SIMR3_QCBRORN_S 0 +#define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ +#define AR5K_SIMR3_QCBRURN_S 16 + +#define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */ +#define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */ +#define AR5K_SIMR4_QTRIG_S 0 + +/* + * DMA Debug registers 0-7 + * 0xe0 - 0xfc + */ + +/* + * Decompression mask registers [5212+] + */ +#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */ +#define AR5K_DCM_DATA 0x0404 /*Decompression mask data */ + +/* + * Wake On Wireless pattern control register [5212+] + */ +#define AR5K_WOW_PCFG 0x0410 /* Register Address */ +#define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */ +#define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */ +#define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */ +#define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */ +#define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */ +#define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */ +#define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */ +#define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */ +#define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */ + +/* + * Wake On Wireless pattern index register (?) [5212+] + */ +#define AR5K_WOW_PAT_IDX 0x0414 + +/* + * Wake On Wireless pattern data register [5212+] + */ +#define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */ +#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */ +#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */ +#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */ +#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */ +#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */ +#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */ + +/* + * Decompression configuration registers [5212+] + */ +#define AR5K_DCCFG 0x0420 /* Register Address */ +#define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */ +#define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */ +#define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */ +#define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */ + +/* + * Compression configuration registers [5212+] + */ +#define AR5K_CCFG 0x0600 /* Register Address */ +#define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */ +#define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */ + +#define AR5K_CCFG_CCU 0x0604 /* Register Address */ +#define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */ +#define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */ +#define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */ +#define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */ +#define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */ + +/* + * Compression performance counter registers [5212+] + */ +#define AR5K_CPC0 0x0610 /* Compression performance counter 0 */ +#define AR5K_CPC1 0x0614 /* Compression performance counter 1*/ +#define AR5K_CPC2 0x0618 /* Compression performance counter 2 */ +#define AR5K_CPC3 0x061c /* Compression performance counter 3 */ +#define AR5K_CPCOVF 0x0620 /* Compression performance overflow */ + + +/* + * Queue control unit (QCU) registers [5211+] + * + * Card has 12 TX Queues but i see that only 0-9 are used (?) + * both in binary HAL (see ah.h) and ar5k. Each queue has it's own + * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate) + * configuration register (0x08c0 - 0x08ec), a ready time configuration + * register (0x0900 - 0x092c), a misc configuration register (0x09c0 - + * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some + * global registers, QCU transmit enable/disable and "one shot arm (?)" + * set/clear, which contain status for all queues (we shift by 1 for each + * queue). To access these registers easily we define some macros here + * that are used inside HAL. For more infos check out *_tx_queue functs. + */ + +/* + * Generic QCU Register access macros + */ +#define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r) +#define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q)) +#define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q)) + +/* + * QCU Transmit descriptor pointer registers + */ +#define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */ +#define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q) + +/* + * QCU Transmit enable register + */ +#define AR5K_QCU_TXE 0x0840 +#define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q) +#define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q) + +/* + * QCU Transmit disable register + */ +#define AR5K_QCU_TXD 0x0880 +#define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q) +#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q) + +/* + * QCU Constant Bit Rate configuration registers + */ +#define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */ +#define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */ +#define AR5K_QCU_CBRCFG_INTVAL_S 0 +#define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */ +#define AR5K_QCU_CBRCFG_ORN_THRES_S 24 +#define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q) + +/* + * QCU Ready time configuration registers + */ +#define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */ +#define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */ +#define AR5K_QCU_RDYTIMECFG_INTVAL_S 0 +#define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */ +#define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q) + +/* + * QCU one shot arm set registers + */ +#define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */ +#define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff + +/* + * QCU one shot arm clear registers + */ +#define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */ +#define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff + +/* + * QCU misc registers + */ +#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ +#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */ +#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ +#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ +#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ +#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */ +#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */ +#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ +#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */ +#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */ +#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ +#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */ +#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */ +#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ +#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ +#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ +#define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q) + + +/* + * QCU status registers + */ +#define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */ +#define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */ +#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */ +#define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q) + +/* + * QCU ready time shutdown register + */ +#define AR5K_QCU_RDYTIMESHDN 0x0a40 +#define AR5K_QCU_RDYTIMESHDN_M 0x000003ff + +/* + * QCU compression buffer base registers [5212+] + */ +#define AR5K_QCU_CBB_SELECT 0x0b00 +#define AR5K_QCU_CBB_ADDR 0x0b04 +#define AR5K_QCU_CBB_ADDR_S 9 + +/* + * QCU compression buffer configuration register [5212+] + * (buffer size) + */ +#define AR5K_QCU_CBCFG 0x0b08 + + + +/* + * Distributed Coordination Function (DCF) control unit (DCU) + * registers [5211+] + * + * These registers control the various characteristics of each queue + * for 802.11e (WME) compatibility so they go together with + * QCU registers in pairs. For each queue we have a QCU mask register, + * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), + * a retry limit register (0x1080 - 0x10ac), a channel time register + * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and + * a sequence number register (0x1140 - 0x116c). It seems that "global" + * registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). + * We use the same macros here for easier register access. + * + */ + +/* + * DCU QCU mask registers + */ +#define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */ +#define AR5K_DCU_QCUMASK_M 0x000003ff +#define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q) + +/* + * DCU local Inter Frame Space settings register + */ +#define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */ +#define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */ +#define AR5K_DCU_LCL_IFS_CW_MIN_S 0 +#define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */ +#define AR5K_DCU_LCL_IFS_CW_MAX_S 10 +#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */ +#define AR5K_DCU_LCL_IFS_AIFS_S 20 +#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */ +#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q) + +/* + * DCU retry limit registers + * all these fields don't allow zero values + */ +#define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */ +#define AR5K_DCU_RETRY_LMT_RTS 0x0000000f /* RTS failure limit. Transmission fails if no CTS is received for this number of times */ +#define AR5K_DCU_RETRY_LMT_RTS_S 0 +#define AR5K_DCU_RETRY_LMT_STA_RTS 0x00003f00 /* STA RTS failure limit. If exceeded CW reset */ +#define AR5K_DCU_RETRY_LMT_STA_RTS_S 8 +#define AR5K_DCU_RETRY_LMT_STA_DATA 0x000fc000 /* STA data failure limit. If exceeded CW reset. */ +#define AR5K_DCU_RETRY_LMT_STA_DATA_S 14 +#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q) + +/* + * DCU channel time registers + */ +#define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */ +#define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */ +#define AR5K_DCU_CHAN_TIME_DUR_S 0 +#define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */ +#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q) + +/* + * DCU misc registers [5211+] + * + * Note: Arbiter lockout control controls the + * behaviour on low priority queues when we have multiple queues + * with pending frames. Intra-frame lockout means we wait until + * the queue's current frame transmits (with post frame backoff and bursting) + * before we transmit anything else and global lockout means we + * wait for the whole queue to finish before higher priority queues + * can transmit (this is used on beacon and CAB queues). + * No lockout means there is no special handling. + */ +#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ +#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */ +#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series + station RTS/data failure count + reset policy (?) */ +#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series + CW reset policy */ +#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */ +#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ +#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ +#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ +#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ +#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ +#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 +#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1 +#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ +#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 +#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */ +#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */ +#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */ +#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */ +#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */ +#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */ +#define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */ +#define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q) + +/* + * DCU frame sequence number registers + */ +#define AR5K_DCU_SEQNUM_BASE 0x1140 +#define AR5K_DCU_SEQNUM_M 0x00000fff +#define AR5K_QUEUE_DCU_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) + +/* + * DCU global IFS SIFS register + */ +#define AR5K_DCU_GBL_IFS_SIFS 0x1030 +#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff + +/* + * DCU global IFS slot interval register + */ +#define AR5K_DCU_GBL_IFS_SLOT 0x1070 +#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff + +/* + * DCU global IFS EIFS register + */ +#define AR5K_DCU_GBL_IFS_EIFS 0x10b0 +#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff + +/* + * DCU global IFS misc register + * + * LFSR stands for Linear Feedback Shift Register + * and it's used for generating pseudo-random + * number sequences. + * + * (If i understand correctly, random numbers are + * used for idle sensing -multiplied with cwmin/max etc-) + */ +#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ +#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */ +#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC_S 4 +#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10 +#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ + +/* + * DCU frame prefetch control register + */ +#define AR5K_DCU_FP 0x1230 /* Register Address */ +#define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */ +#define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */ +#define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */ + +/* + * DCU transmit pause control/status register + */ +#define AR5K_DCU_TXP 0x1270 /* Register Address */ +#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */ +#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */ + +/* + * DCU transmit filter table 0 (32 entries) + * each entry contains a 32bit slice of the + * 128bit tx filter for each DCU (4 slices per DCU) + */ +#define AR5K_DCU_TX_FILTER_0_BASE 0x1038 +#define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64)) + +/* + * DCU transmit filter table 1 (16 entries) + */ +#define AR5K_DCU_TX_FILTER_1_BASE 0x103c +#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64)) + +/* + * DCU clear transmit filter register + */ +#define AR5K_DCU_TX_FILTER_CLR 0x143c + +/* + * DCU set transmit filter register + */ +#define AR5K_DCU_TX_FILTER_SET 0x147c + +/* + * Reset control register + */ +#define AR5K_RESET_CTL 0x4000 /* Register Address */ +#define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */ +#define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */ +#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */ +#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */ +#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */ +#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */ + +/* + * Sleep control register + */ +#define AR5K_SLEEP_CTL 0x4004 /* Register Address */ +#define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */ +#define AR5K_SLEEP_CTL_SLDUR_S 0 +#define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */ +#define AR5K_SLEEP_CTL_SLE_S 16 +#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */ +#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ +#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */ +#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ +#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */ +#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */ +#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */ + +/* + * Interrupt pending register + */ +#define AR5K_INTPEND 0x4008 +#define AR5K_INTPEND_M 0x00000001 + +/* + * Sleep force register + */ +#define AR5K_SFR 0x400c +#define AR5K_SFR_EN 0x00000001 + +/* + * PCI configuration register + * TODO: Fix LED stuff + */ +#define AR5K_PCICFG 0x4010 /* Register Address */ +#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ +#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */ +#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ +#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ +#define AR5K_PCICFG_EESIZE_S 3 +#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */ +#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */ +#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */ +#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */ +#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */ +#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */ +#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */ +#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */ +#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */ +#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */ +#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ +#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ +#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ +#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even with pending interrupts*/ +#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ +#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ +#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ +#define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */ +#define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */ +#define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */ +#define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */ +#define AR5K_PCICFG_LEDBLINK_S 20 +#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */ +#define AR5K_PCICFG_LEDSTATE \ + (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ + AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) +#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */ +#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24 + +/* + * "General Purpose Input/Output" (GPIO) control register + * + * I'm not sure about this but after looking at the code + * for all chipsets here is what i got. + * + * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits) + * Mode 0 -> always input + * Mode 1 -> output when GPIODO for this GPIO is set to 0 + * Mode 2 -> output when GPIODO for this GPIO is set to 1 + * Mode 3 -> always output + * + * For more infos check out get_gpio/set_gpio and + * set_gpio_input/set_gpio_output functs. + * For more infos on gpio interrupt check out set_gpio_intr. + */ +#define AR5K_NUM_GPIO 6 + +#define AR5K_GPIOCR 0x4014 /* Register Address */ +#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ +#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */ +#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */ +#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */ +#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */ +#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */ +#define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */ +#define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */ + +/* + * "General Purpose Input/Output" (GPIO) data output register + */ +#define AR5K_GPIODO 0x4018 + +/* + * "General Purpose Input/Output" (GPIO) data input register + */ +#define AR5K_GPIODI 0x401c +#define AR5K_GPIODI_M 0x0000002f + +/* + * Silicon revision register + */ +#define AR5K_SREV 0x4020 /* Register Address */ +#define AR5K_SREV_REV 0x0000000f /* Mask for revision */ +#define AR5K_SREV_REV_S 0 +#define AR5K_SREV_VER 0x000000ff /* Mask for version */ +#define AR5K_SREV_VER_S 4 + +/* + * TXE write posting register + */ +#define AR5K_TXEPOST 0x4028 + +/* + * QCU sleep mask + */ +#define AR5K_QCU_SLEEP_MASK 0x402c + +/* 0x4068 is compression buffer configuration + * register on 5414 and pm configuration register + * on 5424 and newer pci-e chips. */ + +/* + * Compression buffer configuration + * register (enable/disable) [5414] + */ +#define AR5K_5414_CBCFG 0x4068 +#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */ + +/* + * PCI-E Power management configuration + * and status register [5424+] + */ +#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */ +/* Only 5424 */ +#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1 + when d2_sleep_en is asserted */ +#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */ +#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */ +#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes + down */ +/* Wake On Wireless */ +#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */ +#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */ +#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */ +#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080 +#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100 +#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200 +#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400 + +/* + * PCI-E Workaround enable register + */ +#define AR5K_PCIE_WAEN 0x407c + +/* + * PCI-E Serializer/Deserializer + * registers + */ +#define AR5K_PCIE_SERDES 0x4080 +#define AR5K_PCIE_SERDES_RESET 0x4084 + +/*====EEPROM REGISTERS====*/ + +/* + * EEPROM access registers + * + * Here we got a difference between 5210/5211-12 + * read data register for 5210 is at 0x6800 and + * status register is at 0x6c00. There is also + * no eeprom command register on 5210 and the + * offsets are different. + * + * To read eeprom data for a specific offset: + * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) + * read AR5K_EEPROM_BASE +(4 * offset) + * check the eeprom status register + * and read eeprom data register. + * + * 5211 - write offset to AR5K_EEPROM_BASE + * 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD + * check the eeprom status register + * and read eeprom data register. + * + * To write eeprom data for a specific offset: + * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) + * write data to AR5K_EEPROM_BASE +(4 * offset) + * check the eeprom status register + * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD + * 5212 write offset to AR5K_EEPROM_BASE + * write data to data register + * write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD + * check the eeprom status register + * + * For more infos check eeprom_* functs and the ar5k.c + * file posted in madwifi-devel mailing list. + * http://sourceforge.net/mailarchive/message.php?msg_id=8966525 + * + */ +#define AR5K_EEPROM_BASE 0x6000 + +/* + * EEPROM data register + */ +#define AR5K_EEPROM_DATA_5211 0x6004 +#define AR5K_EEPROM_DATA_5210 0x6800 +#define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \ + AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211) + +/* + * EEPROM command register + */ +#define AR5K_EEPROM_CMD 0x6008 /* Register Address */ +#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */ +#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */ +#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */ + +/* + * EEPROM status register + */ +#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */ +#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */ +#define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \ + AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211) +#define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */ +#define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */ +#define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */ +#define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */ + +/* + * EEPROM config register + */ +#define AR5K_EEPROM_CFG 0x6010 /* Register Address */ +#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ +#define AR5K_EEPROM_CFG_SIZE_AUTO 0 +#define AR5K_EEPROM_CFG_SIZE_4KBIT 1 +#define AR5K_EEPROM_CFG_SIZE_8KBIT 2 +#define AR5K_EEPROM_CFG_SIZE_16KBIT 3 +#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ +#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ +#define AR5K_EEPROM_CFG_CLK_RATE_S 3 +#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0 +#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1 +#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2 +#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */ +#define AR5K_EEPROM_CFG_PROT_KEY_S 8 +#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ + + +/* + * TODO: Wake On Wireless registers + * Range 0x7000 - 0x7ce0 + */ + +/* + * Protocol Control Unit (PCU) registers + */ +/* + * Used for checking initial register writes + * during channel reset (see reset func) + */ +#define AR5K_PCU_MIN 0x8000 +#define AR5K_PCU_MAX 0x8fff + +/* + * First station id register (Lower 32 bits of MAC address) + */ +#define AR5K_STA_ID0 0x8000 +#define AR5K_STA_ID0_ARRD_L32 0xffffffff + +/* + * Second station id register (Upper 16 bits of MAC address + PCU settings) + */ +#define AR5K_STA_ID1 0x8004 /* Register Address */ +#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC address */ +#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ +#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ +#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ +#define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */ +#define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */ +#define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */ +#define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/ +#define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \ + AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211) +#define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ +#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ +#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ +#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Rate to use for ACK/CTS. 0: highest mandatory rate <= RX rate; 1: 1Mbps in B mode */ +#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* 802.11b base rate. 0: 1, 2, 5.5 and 11Mbps; 1: 1 and 2Mbps. [5211+] */ +#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */ +#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ +#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */ +#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ +#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */ +#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */ + +#define AR5K_STA_ID1_ANTENNA_SETTINGS (AR5K_STA_ID1_DEFAULT_ANTENNA | \ + AR5K_STA_ID1_DESC_ANTENNA | \ + AR5K_STA_ID1_RTS_DEF_ANTENNA | \ + AR5K_STA_ID1_SELFGEN_DEF_ANT) + +/* + * First BSSID register (MAC address, lower 32bits) + */ +#define AR5K_BSS_ID0 0x8008 + +/* + * Second BSSID register (MAC address in upper 16 bits) + * + * AID: Association ID + */ +#define AR5K_BSS_ID1 0x800c +#define AR5K_BSS_ID1_AID 0xffff0000 +#define AR5K_BSS_ID1_AID_S 16 + +/* + * Backoff slot time register + */ +#define AR5K_SLOT_TIME 0x8010 + +/* + * ACK/CTS timeout register + */ +#define AR5K_TIME_OUT 0x8014 /* Register Address */ +#define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */ +#define AR5K_TIME_OUT_ACK_S 0 +#define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */ +#define AR5K_TIME_OUT_CTS_S 16 + +/* + * RSSI threshold register + */ +#define AR5K_RSSI_THR 0x8018 /* Register Address */ +#define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */ +#define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */ +#define AR5K_RSSI_THR_BMISS_5210_S 8 +#define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */ +#define AR5K_RSSI_THR_BMISS_5211_S 8 +#define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211) +#define AR5K_RSSI_THR_BMISS_S 8 + +/* + * 5210 has more PCU registers because there is no QCU/DCU + * so queue parameters are set here, this way a lot common + * registers have different address for 5210. To make things + * easier we define a macro based on ah->ah_version for common + * registers with different addresses and common flags. + */ + +/* + * Retry limit register + * + * Retry limit register for 5210 (no QCU/DCU so it's done in PCU) + */ +#define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */ +#define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ +#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0 +#define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */ +#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4 +#define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */ +#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8 +#define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */ +#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14 +#define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */ +#define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20 + +/* + * Transmit latency register + */ +#define AR5K_USEC_5210 0x8020 /* Register Address [5210] */ +#define AR5K_USEC_5211 0x801c /* Register Address [5211+] */ +#define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \ + AR5K_USEC_5210 : AR5K_USEC_5211) +#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ +#define AR5K_USEC_1_S 0 +#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */ +#define AR5K_USEC_32_S 7 +#define AR5K_USEC_TX_LATENCY_5211 0x007fc000 +#define AR5K_USEC_TX_LATENCY_5211_S 14 +#define AR5K_USEC_RX_LATENCY_5211 0x1f800000 +#define AR5K_USEC_RX_LATENCY_5211_S 23 +#define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */ +#define AR5K_USEC_TX_LATENCY_5210_S 14 +#define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */ +#define AR5K_USEC_RX_LATENCY_5210_S 20 + +/* + * PCU beacon control register + */ +#define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */ +#define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */ +#define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \ + AR5K_BEACON_5210 : AR5K_BEACON_5211) +#define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */ +#define AR5K_BEACON_PERIOD_S 0 +#define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */ +#define AR5K_BEACON_TIM_S 16 +#define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */ +#define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */ + +/* + * CFP period register + */ +#define AR5K_CFP_PERIOD_5210 0x8028 +#define AR5K_CFP_PERIOD_5211 0x8024 +#define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \ + AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211) + +/* + * Next beacon time register + */ +#define AR5K_TIMER0_5210 0x802c +#define AR5K_TIMER0_5211 0x8028 +#define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER0_5210 : AR5K_TIMER0_5211) + +/* + * Next DMA beacon alert register + */ +#define AR5K_TIMER1_5210 0x8030 +#define AR5K_TIMER1_5211 0x802c +#define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER1_5210 : AR5K_TIMER1_5211) + +/* + * Next software beacon alert register + */ +#define AR5K_TIMER2_5210 0x8034 +#define AR5K_TIMER2_5211 0x8030 +#define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER2_5210 : AR5K_TIMER2_5211) + +/* + * Next ATIM window time register + */ +#define AR5K_TIMER3_5210 0x8038 +#define AR5K_TIMER3_5211 0x8034 +#define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER3_5210 : AR5K_TIMER3_5211) + + +/* + * 5210 First inter frame spacing register (IFS) + */ +#define AR5K_IFS0 0x8040 +#define AR5K_IFS0_SIFS 0x000007ff +#define AR5K_IFS0_SIFS_S 0 +#define AR5K_IFS0_DIFS 0x007ff800 +#define AR5K_IFS0_DIFS_S 11 + +/* + * 5210 Second inter frame spacing register (IFS) + */ +#define AR5K_IFS1 0x8044 +#define AR5K_IFS1_PIFS 0x00000fff +#define AR5K_IFS1_PIFS_S 0 +#define AR5K_IFS1_EIFS 0x03fff000 +#define AR5K_IFS1_EIFS_S 12 +#define AR5K_IFS1_CS_EN 0x04000000 +#define AR5K_IFS1_CS_EN_S 26 + +/* + * CFP duration register + */ +#define AR5K_CFP_DUR_5210 0x8048 +#define AR5K_CFP_DUR_5211 0x8038 +#define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \ + AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211) + +/* + * Receive filter register + */ +#define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */ +#define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ +#define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211) +#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ +#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ +#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ +#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ +#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ +#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ +#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ +#define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */ +#define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */ +#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ +#define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */ +#define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */ +#define AR5K_RX_FILTER_PHYERR \ + ((ah->ah_version == AR5K_AR5211 ? \ + AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212)) +#define AR5K_RX_FILTER_RADARERR \ + ((ah->ah_version == AR5K_AR5211 ? \ + AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212)) + +/* + * Multicast filter register (lower 32 bits) + */ +#define AR5K_MCAST_FILTER0_5210 0x8050 +#define AR5K_MCAST_FILTER0_5211 0x8040 +#define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211) + +/* + * Multicast filter register (higher 16 bits) + */ +#define AR5K_MCAST_FILTER1_5210 0x8054 +#define AR5K_MCAST_FILTER1_5211 0x8044 +#define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211) + + +/* + * Transmit mask register (lower 32 bits) [5210] + */ +#define AR5K_TX_MASK0 0x8058 + +/* + * Transmit mask register (higher 16 bits) [5210] + */ +#define AR5K_TX_MASK1 0x805c + +/* + * Clear transmit mask [5210] + */ +#define AR5K_CLR_TMASK 0x8060 + +/* + * Trigger level register (before transmission) [5210] + */ +#define AR5K_TRIG_LVL 0x8064 + + +/* + * PCU Diagnostic register + * + * Used for tweaking/diagnostics. + */ +#define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */ +#define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ +#define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211) +#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */ +#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */ +#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */ +#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable HW encryption */ +#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable HW decryption */ +#define AR5K_DIAG_SW_DIS_TX_5210 0x00000020 /* Disable transmit [5210] */ +#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable receive */ +#define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 +#define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211) +#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* TX Data Loopback (i guess it goes with DIS_TX) [5210] */ +#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 +#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) +#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Generate invalid TX FCS */ +#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 +#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) +#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Add 56 bytes of channel info before the frame data in the RX buffer */ +#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 +#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */ +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 +#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) +#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ +#define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ +#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */ +#define AR5K_DIAG_SW_SCRAM_SEED_S 10 +#define AR5K_DIAG_SW_DIS_SEQ_INC_5210 0x00040000 /* Disable seqnum increment (?)[5210] */ +#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 +#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */ +#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) +#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */ +#define AR5K_DIAG_SW_OBSPT_S 18 +#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x00100000 /* Ignore carrier sense */ +#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x00200000 /* Ignore virtual carrier sense */ +#define AR5K_DIAG_SW_CHANNEL_IDLE_HIGH 0x00400000 /* Force channel idle high */ +#define AR5K_DIAG_SW_PHEAR_ME 0x00800000 /* ??? */ + +/* + * TSF (clock) register (lower 32 bits) + */ +#define AR5K_TSF_L32_5210 0x806c +#define AR5K_TSF_L32_5211 0x804c +#define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211) + +/* + * TSF (clock) register (higher 32 bits) + */ +#define AR5K_TSF_U32_5210 0x8070 +#define AR5K_TSF_U32_5211 0x8050 +#define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211) + +/* + * Last beacon timestamp register (Read Only) + */ +#define AR5K_LAST_TSTP 0x8080 + +/* + * ADDAC test register [5211+] + */ +#define AR5K_ADDAC_TEST 0x8054 /* Register Address */ +#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ +#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ +#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ +#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ +#define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */ +#define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */ +#define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */ +#define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */ +#define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */ +#define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */ +#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* ARM rx buffer for capture */ + +/* + * Default antenna register [5211+] + */ +#define AR5K_DEFAULT_ANTENNA 0x8058 + +/* + * Frame control QoS mask register (?) [5211+] + * (FC_QOS_MASK) + */ +#define AR5K_FRAME_CTL_QOSM 0x805c + +/* + * Seq mask register (?) [5211+] + */ +#define AR5K_SEQ_MASK 0x8060 + +/* + * Retry count register [5210] + */ +#define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */ +#define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */ +#define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */ + +/* + * Back-off status register [5210] + */ +#define AR5K_BACKOFF 0x8088 /* Register Address [5210] */ +#define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */ +#define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */ + + + +/* + * NAV register (current) + */ +#define AR5K_NAV_5210 0x808c +#define AR5K_NAV_5211 0x8084 +#define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \ + AR5K_NAV_5210 : AR5K_NAV_5211) + +/* + * MIB counters: + * + * max value is 0xc000, if this is reached we get a MIB interrupt. + * they can be controlled via AR5K_MIBC and are cleared on read. + */ + +/* + * RTS success (MIB counter) + */ +#define AR5K_RTS_OK_5210 0x8090 +#define AR5K_RTS_OK_5211 0x8088 +#define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211) + +/* + * RTS failure (MIB counter) + */ +#define AR5K_RTS_FAIL_5210 0x8094 +#define AR5K_RTS_FAIL_5211 0x808c +#define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211) + +/* + * ACK failure (MIB counter) + */ +#define AR5K_ACK_FAIL_5210 0x8098 +#define AR5K_ACK_FAIL_5211 0x8090 +#define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211) + +/* + * FCS failure (MIB counter) + */ +#define AR5K_FCS_FAIL_5210 0x809c +#define AR5K_FCS_FAIL_5211 0x8094 +#define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211) + +/* + * Beacon count register + */ +#define AR5K_BEACON_CNT_5210 0x80a0 +#define AR5K_BEACON_CNT_5211 0x8098 +#define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \ + AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211) + + +/*===5212 Specific PCU registers===*/ + +/* + * Transmit power control register + */ +#define AR5K_TPC 0x80e8 +#define AR5K_TPC_ACK 0x0000003f /* ack frames */ +#define AR5K_TPC_ACK_S 0 +#define AR5K_TPC_CTS 0x00003f00 /* cts frames */ +#define AR5K_TPC_CTS_S 8 +#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */ +#define AR5K_TPC_CHIRP_S 16 +#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */ +#define AR5K_TPC_DOPPLER_S 24 + +/* + * XR (eXtended Range) mode register + */ +#define AR5K_XRMODE 0x80c0 /* Register Address */ +#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */ +#define AR5K_XRMODE_POLL_TYPE_S 0 +#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */ +#define AR5K_XRMODE_POLL_SUBTYPE_S 2 +#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */ +#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */ +#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */ +#define AR5K_XRMODE_FRAME_HOLD_S 20 + +/* + * XR delay register + */ +#define AR5K_XRDELAY 0x80c4 /* Register Address */ +#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */ +#define AR5K_XRDELAY_SLOT_DELAY_S 0 +#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */ +#define AR5K_XRDELAY_CHIRP_DELAY_S 16 + +/* + * XR timeout register + */ +#define AR5K_XRTIMEOUT 0x80c8 /* Register Address */ +#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */ +#define AR5K_XRTIMEOUT_CHIRP_S 0 +#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */ +#define AR5K_XRTIMEOUT_POLL_S 16 + +/* + * XR chirp register + */ +#define AR5K_XRCHIRP 0x80cc /* Register Address */ +#define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */ +#define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */ + +/* + * XR stomp register + */ +#define AR5K_XRSTOMP 0x80d0 /* Register Address */ +#define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */ +#define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */ +#define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */ +#define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */ +#define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/ +#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */ + +/* + * First enhanced sleep register + */ +#define AR5K_SLEEP0 0x80d4 /* Register Address */ +#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ +#define AR5K_SLEEP0_NEXT_DTIM_S 0 +#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ +#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */ +#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ +#define AR5K_SLEEP0_CABTO_S 24 + +/* + * Second enhanced sleep register + */ +#define AR5K_SLEEP1 0x80d8 /* Register Address */ +#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */ +#define AR5K_SLEEP1_NEXT_TIM_S 0 +#define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */ +#define AR5K_SLEEP1_BEACON_TO_S 24 + +/* + * Third enhanced sleep register + */ +#define AR5K_SLEEP2 0x80dc /* Register Address */ +#define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */ +#define AR5K_SLEEP2_TIM_PER_S 0 +#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */ +#define AR5K_SLEEP2_DTIM_PER_S 16 + +/* + * TX power control (TPC) register + * + * XXX: PCDAC steps (0.5dBm) or dBm ? + * + */ +#define AR5K_TXPC 0x80e8 /* Register Address */ +#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */ +#define AR5K_TXPC_ACK_S 0 +#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */ +#define AR5K_TXPC_CTS_S 8 +#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */ +#define AR5K_TXPC_CHIRP_S 16 +#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */ +#define AR5K_TXPC_DOPPLER_S 24 + +/* + * Profile count registers + * + * These registers can be cleared and frozen with ATH5K_MIBC, but they do not + * generate a MIB interrupt. + * Instead of overflowing, they shift by one bit to the right. All registers + * shift together, i.e. when one reaches the max, all shift at the same time by + * one bit to the right. This way we should always get consistent values. + */ +#define AR5K_PROFCNT_TX 0x80ec /* Tx count */ +#define AR5K_PROFCNT_RX 0x80f0 /* Rx count */ +#define AR5K_PROFCNT_RXCLR 0x80f4 /* Busy count */ +#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle counter */ + +/* + * Quiet period control registers + */ +#define AR5K_QUIET_CTL1 0x80fc /* Register Address */ +#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */ +#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0 +#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */ +#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */ + +#define AR5K_QUIET_CTL2 0x8100 /* Register Address */ +#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */ +#define AR5K_QUIET_CTL2_QT_PER_S 0 +#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */ +#define AR5K_QUIET_CTL2_QT_DUR_S 16 + +/* + * TSF parameter register + */ +#define AR5K_TSF_PARM 0x8104 /* Register Address */ +#define AR5K_TSF_PARM_INC 0x000000ff /* Mask for TSF increment */ +#define AR5K_TSF_PARM_INC_S 0 + +/* + * QoS NOACK policy + */ +#define AR5K_QOS_NOACK 0x8108 /* Register Address */ +#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */ +#define AR5K_QOS_NOACK_2BIT_VALUES_S 0 +#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */ +#define AR5K_QOS_NOACK_BIT_OFFSET_S 4 +#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */ +#define AR5K_QOS_NOACK_BYTE_OFFSET_S 7 + +/* + * PHY error filter register + */ +#define AR5K_PHY_ERR_FIL 0x810c +#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */ +#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */ +#define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */ + +/* + * XR latency register + */ +#define AR5K_XRLAT_TX 0x8110 + +/* + * ACK SIFS register + */ +#define AR5K_ACKSIFS 0x8114 /* Register Address */ +#define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */ + +/* + * MIC QoS control register (?) + */ +#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ +#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2)) +#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ + +/* + * MIC QoS select register (?) + */ +#define AR5K_MIC_QOS_SEL 0x811c +#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4)) + +/* + * Misc mode control register (?) + */ +#define AR5K_MISC_MODE 0x8120 /* Register Address */ +#define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */ +#define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */ +#define AR5K_MISC_MODE_COMBINED_MIC 0x00000004 /* use rx/tx MIC key */ +/* more bits */ + +/* + * OFDM Filter counter + */ +#define AR5K_OFDM_FIL_CNT 0x8124 + +/* + * CCK Filter counter + */ +#define AR5K_CCK_FIL_CNT 0x8128 + +/* + * PHY Error Counters (same masks as AR5K_PHY_ERR_FIL) + */ +#define AR5K_PHYERR_CNT1 0x812c +#define AR5K_PHYERR_CNT1_MASK 0x8130 + +#define AR5K_PHYERR_CNT2 0x8134 +#define AR5K_PHYERR_CNT2_MASK 0x8138 + +/* if the PHY Error Counters reach this maximum, we get MIB interrupts */ +#define ATH5K_PHYERR_CNT_MAX 0x00c00000 + +/* + * TSF Threshold register (?) + */ +#define AR5K_TSF_THRES 0x813c + +/* + * TODO: Wake On Wireless registers + * Range: 0x8147 - 0x818c + */ + +/* + * Rate -> ACK SIFS mapping table (32 entries) + */ +#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */ +#define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2)) +#define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */ +#define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */ + +/* + * Rate -> duration mapping table (32 entries) + */ +#define AR5K_RATE_DUR_BASE 0x8700 +#define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2)) + +/* + * Rate -> db mapping table + * (8 entries, each one has 4 8bit fields) + */ +#define AR5K_RATE2DB_BASE 0x87c0 +#define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2)) + +/* + * db -> Rate mapping table + * (8 entries, each one has 4 8bit fields) + */ +#define AR5K_DB2RATE_BASE 0x87e0 +#define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2)) + +/*===5212 end===*/ + +#define AR5K_KEYTABLE_SIZE_5210 64 +#define AR5K_KEYTABLE_SIZE_5211 128 + +/*===PHY REGISTERS===*/ + +/* + * PHY registers start + */ +#define AR5K_PHY_BASE 0x9800 +#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2)) + +/* + * TST_2 (Misc config parameters) + */ +#define AR5K_PHY_TST2 0x9800 /* Register Address */ +#define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ +#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ +#define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ +#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */ +#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ +#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ +#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ +#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch ?) */ +#define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */ +#define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */ +#define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */ +#define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */ +#define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */ +#define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */ +#define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */ +#define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */ +#define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */ +#define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */ + +/* + * PHY frame control register [5110] /turbo mode register [5111+] + * + * There is another frame control register for [5111+] + * at address 0x9944 (see below) but the 2 first flags + * are common here between 5110 frame control register + * and [5111+] turbo mode register, so this also works as + * a "turbo mode register" for 5110. We treat this one as + * a frame control register for 5110 below. + */ +#define AR5K_PHY_TURBO 0x9804 /* Register Address */ +#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ +#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */ +#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo */ + +/* + * PHY agility command register + * (aka TST_1) + */ +#define AR5K_PHY_AGC 0x9808 /* Register Address */ +#define AR5K_PHY_TST1 0x9808 +#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ +#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ +#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */ +#define AR5K_PHY_TST1_TXSRC_SRC_S 1 +#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */ +#define AR5K_PHY_TST1_TXSRC_ALT_S 7 + + +/* + * PHY timing register 3 [5112+] + */ +#define AR5K_PHY_TIMING_3 0x9814 +#define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000 +#define AR5K_PHY_TIMING_3_DSC_MAN_S 17 +#define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000 +#define AR5K_PHY_TIMING_3_DSC_EXP_S 13 + +/* + * PHY chip revision register + */ +#define AR5K_PHY_CHIP_ID 0x9818 + +/* + * PHY activation register + */ +#define AR5K_PHY_ACT 0x981c /* Register Address */ +#define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */ +#define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */ + +/* + * PHY RF control registers + */ +#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0 + +#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000ff00 /* TX end to XLNA on */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 8 + +#define AR5K_PHY_ADC_CTL 0x982c +#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0 +#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000 +#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000 +#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16 + +#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ +#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ +#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */ +#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */ +#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */ + +/* + * Pre-Amplifier control register + * (XPA -> external pre-amplifier) + */ +#define AR5K_PHY_PA_CTL 0x9838 /* Register Address */ +#define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */ +#define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */ +#define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */ +#define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */ + +/* + * PHY settling register + */ +#define AR5K_PHY_SETTLING 0x9844 /* Register Address */ +#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */ +#define AR5K_PHY_SETTLING_AGC_S 0 +#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settling time */ +#define AR5K_PHY_SETTLING_SWITCH_S 7 + +/* + * PHY Gain registers + */ +#define AR5K_PHY_GAIN 0x9848 /* Register Address */ +#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */ +#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12 +#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000 +#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18 + +#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ +#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ + +/* + * Desired ADC/PGA size register + * (for more infos read ANI patent) + */ +#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ +#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */ +#define AR5K_PHY_DESIRED_SIZE_ADC_S 0 +#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */ +#define AR5K_PHY_DESIRED_SIZE_PGA_S 8 +#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */ +#define AR5K_PHY_DESIRED_SIZE_TOT_S 20 + +/* + * PHY signal register + * (for more infos read ANI patent) + */ +#define AR5K_PHY_SIG 0x9858 /* Register Address */ +#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */ +#define AR5K_PHY_SIG_FIRSTEP_S 12 +#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */ +#define AR5K_PHY_SIG_FIRPWR_S 18 + +/* + * PHY coarse agility control register + * (for more infos read ANI patent) + */ +#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ +#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */ +#define AR5K_PHY_AGCCOARSE_LO_S 7 +#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */ +#define AR5K_PHY_AGCCOARSE_HI_S 15 + +/* + * PHY agility control register + */ +#define AR5K_PHY_AGCCTL 0x9860 /* Register address */ +#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ +#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ +#define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */ +#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ +#define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */ +#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */ + +/* + * PHY noise floor status register (CCA = Clear Channel Assessment) + */ +#define AR5K_PHY_NF 0x9864 /* Register address */ +#define AR5K_PHY_NF_M 0x000001ff /* Noise floor, written to hardware in 1/2 dBm units */ +#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) +#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */ +#define AR5K_PHY_NF_THRESH62_S 12 +#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* Minimum measured noise level, read from hardware in 1 dBm units */ +#define AR5K_PHY_NF_MINCCA_PWR_S 19 + +/* + * PHY ADC saturation register [5110] + */ +#define AR5K_PHY_ADCSAT 0x9868 +#define AR5K_PHY_ADCSAT_ICNT 0x0001f800 +#define AR5K_PHY_ADCSAT_ICNT_S 11 +#define AR5K_PHY_ADCSAT_THR 0x000007e0 +#define AR5K_PHY_ADCSAT_THR_S 5 + +/* + * PHY Weak ofdm signal detection threshold registers (ANI) [5212+] + */ + +/* High thresholds */ +#define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 + +/* Low thresholds */ +#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c +#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21 + + +/* + * PHY sleep registers [5112+] + */ +#define AR5K_PHY_SCR 0x9870 + +#define AR5K_PHY_SLMT 0x9874 +#define AR5K_PHY_SLMT_32MHZ 0x0000007f + +#define AR5K_PHY_SCAL 0x9878 +#define AR5K_PHY_SCAL_32MHZ 0x0000000e +#define AR5K_PHY_SCAL_32MHZ_5311 0x00000008 +#define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a +#define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032 + +/* + * PHY PLL (Phase Locked Loop) control register + */ +#define AR5K_PHY_PLL 0x987c +#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */ +/* 40MHz -> 5GHz band */ +#define AR5K_PHY_PLL_40MHZ_5211 0x00000018 +#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa +#define AR5K_PHY_PLL_40MHZ_5413 0x00000004 +#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \ + AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212) +/* 44MHz -> 2.4GHz band */ +#define AR5K_PHY_PLL_44MHZ_5211 0x00000019 +#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab +#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \ + AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) + +#define AR5K_PHY_PLL_RF5111 0x00000000 +#define AR5K_PHY_PLL_RF5112 0x00000040 +#define AR5K_PHY_PLL_HALF_RATE 0x00000100 +#define AR5K_PHY_PLL_QUARTER_RATE 0x00000200 + +/* + * RF Buffer register + * + * It's obvious from the code that 0x989c is the buffer register but + * for the other special registers that we write to after sending each + * packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers + * for now. It's interesting that they are also used for some other operations. + */ + +#define AR5K_RF_BUFFER 0x989c +#define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */ +#define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */ +#define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */ + +#define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */ + /* Channel set on 5111 */ + /* Used to read radio revision*/ + +#define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */ + /* Bank 0,1,2,6 on 5111 */ + /* Bank 1 on 5112 */ + /* Used during activation on 5111 */ + +#define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */ + /* Used during activation on 5111 */ + /* Channel on 5112 */ + /* Bank 6 on 5112 */ + +#define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */ + +/* + * PHY RF stage register [5210] + */ +#define AR5K_PHY_RFSTG 0x98d4 +#define AR5K_PHY_RFSTG_DISABLE 0x00000021 + +/* + * BIN masks (?) + */ +#define AR5K_PHY_BIN_MASK_1 0x9900 +#define AR5K_PHY_BIN_MASK_2 0x9904 +#define AR5K_PHY_BIN_MASK_3 0x9908 + +#define AR5K_PHY_BIN_MASK_CTL 0x990c +#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff +#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0 +#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000 +#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24 + +/* + * PHY Antenna control register + */ +#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */ +#define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */ +#define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */ +#define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */ +#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x000003f0 /* Switch table idle (?) */ +#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4 + +/* + * PHY receiver delay register [5111+] + */ +#define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */ +#define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */ + +/* + * PHY max rx length register (?) [5111] + */ +#define AR5K_PHY_MAX_RX_LEN 0x991c + +/* + * PHY timing register 4 + * I(nphase)/Q(adrature) calibration register [5111+] + */ +#define AR5K_PHY_IQ 0x9920 /* Register Address */ +#define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */ +#define AR5K_PHY_IQ_CORR_Q_Q_COFF_S 0 +#define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */ +#define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5 +#define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */ +#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */ +#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12 +#define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */ +#define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */ +#define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */ +#define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */ +#define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */ +#define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */ +#define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */ + +/* + * PHY timing register 5 + * OFDM Self-correlator Cyclic RSSI threshold params + * (Check out bb_cycpwr_thr1 on ANI patent) + */ +#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 1 +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ +#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ +#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ +#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */ + +/* + * PHY-only warm reset register + */ +#define AR5K_PHY_WARM_RESET 0x9928 + +/* + * PHY-only control register + */ +#define AR5K_PHY_CTL 0x992c /* Register Address */ +#define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */ +#define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */ +#define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */ +#define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */ +#define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */ +#define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */ +#define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */ +#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */ + +/* + * PHY PAPD probe register [5111+] + */ +#define AR5K_PHY_PAPD_PROBE 0x9930 +#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001 +#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002 +#define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040 +#define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00 +#define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9 +#define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000 +#define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000 +#define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */ +#define AR5K_PHY_PAPD_PROBE_TYPE_S 23 +#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0 +#define AR5K_PHY_PAPD_PROBE_TYPE_XR 1 +#define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2 +#define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000 +#define AR5K_PHY_PAPD_PROBE_GAINF_S 25 +#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */ +#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */ + +/* + * PHY TX rate power registers [5112+] + */ +#define AR5K_PHY_TXPOWER_RATE1 0x9934 +#define AR5K_PHY_TXPOWER_RATE2 0x9938 +#define AR5K_PHY_TXPOWER_RATE_MAX 0x993c +#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040 +#define AR5K_PHY_TXPOWER_RATE3 0xa234 +#define AR5K_PHY_TXPOWER_RATE4 0xa238 + +/* + * PHY frame control register [5111+] + */ +#define AR5K_PHY_FRAME_CTL_5210 0x9804 +#define AR5K_PHY_FRAME_CTL_5211 0x9944 +#define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) +/*---[5111+]---*/ +#define AR5K_PHY_FRAME_CTL_WIN_LEN 0x00000003 /* Force window length (?) */ +#define AR5K_PHY_FRAME_CTL_WIN_LEN_S 0 +#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ +#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 +#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ +#define AR5K_PHY_FRAME_CTL_EMU 0x80000000 +#define AR5K_PHY_FRAME_CTL_EMU_S 31 +/*---[5110/5111]---*/ +#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ +#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ +#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */ +#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ +#define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 +#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ +#define AR5K_PHY_FRAME_CTL_INI \ + (AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ + AR5K_PHY_FRAME_CTL_TXURN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ + AR5K_PHY_FRAME_CTL_PARITY_ERR | \ + AR5K_PHY_FRAME_CTL_TIMING_ERR) + +/* + * PHY Tx Power adjustment register [5212A+] + */ +#define AR5K_PHY_TX_PWR_ADJ 0x994c +#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA 0x00000fc0 +#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S 6 +#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX 0x00fc0000 +#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S 18 + +/* + * PHY radar detection register [5111+] + */ +#define AR5K_PHY_RADAR 0x9954 +#define AR5K_PHY_RADAR_ENABLE 0x00000001 +#define AR5K_PHY_RADAR_DISABLE 0x00000000 +#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold + 5-bits, units unknown {0..31} + (? MHz ?) */ +#define AR5K_PHY_RADAR_INBANDTHR_S 1 + +#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_PRSSI_THR_S 6 + +#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 + +#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_RSSI_THR_S 18 + +#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response + filter power out threshold. + 7-bits, standard power range + {0..127} in 1/2 dBm units. */ +#define AR5K_PHY_RADAR_FIRPWR_THRS 24 + +/* + * PHY antenna switch table registers + */ +#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 +#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 + +/* + * PHY Noise floor threshold + */ +#define AR5K_PHY_NFTHRES 0x9968 + +/* + * Sigma Delta register (?) [5213] + */ +#define AR5K_PHY_SIGMA_DELTA 0x996C +#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003 +#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0 +#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8 +#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3 +#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00 +#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8 +#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ffe000 +#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13 + +/* + * RF restart register [5112+] (?) + */ +#define AR5K_PHY_RESTART 0x9970 /* restart */ +#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */ +#define AR5K_PHY_RESTART_DIV_GC_S 18 + +/* + * RF Bus access request register (for synth-only channel switching) + */ +#define AR5K_PHY_RFBUS_REQ 0x997C +#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 + +/* + * Spur mitigation masks (?) + */ +#define AR5K_PHY_TIMING_7 0x9980 +#define AR5K_PHY_TIMING_8 0x9984 +#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff +#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0 + +#define AR5K_PHY_BIN_MASK2_1 0x9988 +#define AR5K_PHY_BIN_MASK2_2 0x998c +#define AR5K_PHY_BIN_MASK2_3 0x9990 + +#define AR5K_PHY_BIN_MASK2_4 0x9994 +#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff +#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0 + +#define AR5K_PHY_TIMING_9 0x9998 +#define AR5K_PHY_TIMING_10 0x999c +#define AR5K_PHY_TIMING_10_PILOT_MASK_2 0x000fffff +#define AR5K_PHY_TIMING_10_PILOT_MASK_2_S 0 + +/* + * Spur mitigation control + */ +#define AR5K_PHY_TIMING_11 0x99a0 /* Register address */ +#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ +#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 +#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ +#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S 20 +#define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ +#define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ + +/* + * Gain tables + */ +#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ +#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) +#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */ +#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) + +/* + * PHY timing IQ calibration result register [5111+] + */ +#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ +#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ +#define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */ + +/* + * PHY current RSSI register [5111+] + */ +#define AR5K_PHY_CURRENT_RSSI 0x9c1c + +/* + * PHY RF Bus grant register + */ +#define AR5K_PHY_RFBUS_GRANT 0x9c20 +#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001 + +/* + * PHY ADC test register + */ +#define AR5K_PHY_ADC_TEST 0x9c24 +#define AR5K_PHY_ADC_TEST_I 0x00000001 +#define AR5K_PHY_ADC_TEST_Q 0x00000200 + +/* + * PHY DAC test register + */ +#define AR5K_PHY_DAC_TEST 0x9c28 +#define AR5K_PHY_DAC_TEST_I 0x00000001 +#define AR5K_PHY_DAC_TEST_Q 0x00000200 + +/* + * PHY PTAT register (?) + */ +#define AR5K_PHY_PTAT 0x9c2c + +/* + * PHY Illegal TX rate register [5112+] + */ +#define AR5K_PHY_BAD_TX_RATE 0x9c30 + +/* + * PHY SPUR Power register [5112+] + */ +#define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */ +#define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */ +#define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */ +#define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */ + +/* + * PHY Channel status register [5112+] (?) + */ +#define AR5K_PHY_CHAN_STATUS 0x9c38 +#define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 + +/* + * Heavy clip enable register + */ +#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0 + +/* + * PHY clock sleep registers [5112+] + */ +#define AR5K_PHY_SCLOCK 0x99f0 +#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c +#define AR5K_PHY_SDELAY 0x99f4 +#define AR5K_PHY_SDELAY_32MHZ 0x000000ff +#define AR5K_PHY_SPENDING 0x99f8 + + +/* + * PHY PAPD I (power?) table (?) + * (92! entries) + */ +#define AR5K_PHY_PAPD_I_BASE 0xa000 +#define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2)) + +/* + * PHY PCDAC TX power table + */ +#define AR5K_PHY_PCDAC_TXPOWER_BASE 0xa180 +#define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) + +/* + * PHY mode register [5111+] + */ +#define AR5K_PHY_MODE 0x0a200 /* Register Address */ +#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */ +#define AR5K_PHY_MODE_MOD_OFDM 0 +#define AR5K_PHY_MODE_MOD_CCK 1 +#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */ +#define AR5K_PHY_MODE_FREQ_5GHZ 0 +#define AR5K_PHY_MODE_FREQ_2GHZ 2 +#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */ +#define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */ +#define AR5K_PHY_MODE_RAD_RF5111 0 +#define AR5K_PHY_MODE_RAD_RF5112 8 +#define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */ +#define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */ +#define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */ + +/* + * PHY CCK transmit control register [5111+ (?)] + */ +#define AR5K_PHY_CCKTXCTL 0xa204 +#define AR5K_PHY_CCKTXCTL_WORLD 0x00000000 +#define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010 +#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001 +#define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004 + +/* + * PHY CCK Cross-correlator Barker RSSI threshold register [5212+] + */ +#define AR5K_PHY_CCK_CROSSCORR 0xa208 +#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000003f +#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 + +/* Same address is used for antenna diversity activation */ +#define AR5K_PHY_FAST_ANT_DIV 0xa208 +#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000 + +/* + * PHY 2GHz gain register [5111+] + */ +#define AR5K_PHY_GAIN_2GHZ 0xa20c +#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 +#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18 +#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c + +#define AR5K_PHY_CCK_RX_CTL_4 0xa21c +#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000 +#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19 + +#define AR5K_PHY_DAG_CCK_CTL 0xa228 +#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200 +#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00 +#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10 + +#define AR5K_PHY_FAST_ADC 0xa24c + +#define AR5K_PHY_BLUETOOTH 0xa254 + +/* + * Transmit Power Control register + * [2413+] + */ +#define AR5K_PHY_TPC_RG1 0xa258 +#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 +#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 +#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000 +#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16 +#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000 +#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18 +#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000 +#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20 + +#define AR5K_PHY_TPC_RG5 0xa26C +#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F +#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22 + +/* + * PHY PDADC Tx power table + */ +#define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280 +#define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2)) + +/* + * Platform registers for WiSoC + */ +#define AR5K_AR5312_RESET 0xbc003020 +#define AR5K_AR5312_RESET_BB0_COLD 0x00000004 +#define AR5K_AR5312_RESET_BB1_COLD 0x00000200 +#define AR5K_AR5312_RESET_WMAC0 0x00002000 +#define AR5K_AR5312_RESET_BB0_WARM 0x00004000 +#define AR5K_AR5312_RESET_WMAC1 0x00020000 +#define AR5K_AR5312_RESET_BB1_WARM 0x00040000 + +#define AR5K_AR5312_ENABLE 0xbc003080 +#define AR5K_AR5312_ENABLE_WLAN0 0x00000001 +#define AR5K_AR5312_ENABLE_WLAN1 0x00000008 + +#define AR5K_AR2315_RESET 0xb1000004 +#define AR5K_AR2315_RESET_WMAC 0x00000001 +#define AR5K_AR2315_RESET_BB_WARM 0x00000002 + +#define AR5K_AR2315_AHB_ARB_CTL 0xb1000008 +#define AR5K_AR2315_AHB_ARB_CTL_WLAN 0x00000002 + +#define AR5K_AR2315_BYTESWAP 0xb100000c +#define AR5K_AR2315_BYTESWAP_WMAC 0x00000002 diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c new file mode 100644 index 000000000..9fdb5283b --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -0,0 +1,1380 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/****************************\ + Reset function and helpers +\****************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <asm/unaligned.h> + +#include <linux/pci.h> /* To determine if a card is pci-e */ +#include <linux/log2.h> +#include <linux/platform_device.h> +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + + +/** + * DOC: Reset function and helpers + * + * Here we implement the main reset routine, used to bring the card + * to a working state and ready to receive. We also handle routines + * that don't fit on other places such as clock, sleep and power control + */ + + +/******************\ +* Helper functions * +\******************/ + +/** + * ath5k_hw_register_timeout() - Poll a register for a flag/field change + * @ah: The &struct ath5k_hw + * @reg: The register to read + * @flag: The flag/field to check on the register + * @val: The field value we expect (if we check a field) + * @is_set: Instead of checking if the flag got cleared, check if it got set + * + * Some registers contain flags that indicate that an operation is + * running. We use this function to poll these registers and check + * if these flags get cleared. We also use it to poll a register + * field (containing multiple flags) until it gets a specific value. + * + * Returns -EAGAIN if we exceeded AR5K_TUNE_REGISTER_TIMEOUT * 15us or 0 + */ +int +ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, + bool is_set) +{ + int i; + u32 data; + + for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { + data = ath5k_hw_reg_read(ah, reg); + if (is_set && (data & flag)) + break; + else if ((data & flag) == val) + break; + udelay(15); + } + + return (i <= 0) ? -EAGAIN : 0; +} + + +/*************************\ +* Clock related functions * +\*************************/ + +/** + * ath5k_hw_htoclock() - Translate usec to hw clock units + * @ah: The &struct ath5k_hw + * @usec: value in microseconds + * + * Translate usecs to hw clock units based on the current + * hw clock rate. + * + * Returns number of clock units + */ +unsigned int +ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) +{ + struct ath_common *common = ath5k_hw_common(ah); + return usec * common->clockrate; +} + +/** + * ath5k_hw_clocktoh() - Translate hw clock units to usec + * @ah: The &struct ath5k_hw + * @clock: value in hw clock units + * + * Translate hw clock units to usecs based on the current + * hw clock rate. + * + * Returns number of usecs + */ +unsigned int +ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) +{ + struct ath_common *common = ath5k_hw_common(ah); + return clock / common->clockrate; +} + +/** + * ath5k_hw_init_core_clock() - Initialize core clock + * @ah: The &struct ath5k_hw + * + * Initialize core clock parameters (usec, usec32, latencies etc), + * based on current bwmode and chipset properties. + */ +static void +ath5k_hw_init_core_clock(struct ath5k_hw *ah) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; + struct ath_common *common = ath5k_hw_common(ah); + u32 usec_reg, txlat, rxlat, usec, clock, sclock, txf2txs; + + /* + * Set core clock frequency + */ + switch (channel->hw_value) { + case AR5K_MODE_11A: + clock = 40; + break; + case AR5K_MODE_11B: + clock = 22; + break; + case AR5K_MODE_11G: + default: + clock = 44; + break; + } + + /* Use clock multiplier for non-default + * bwmode */ + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + clock *= 2; + break; + case AR5K_BWMODE_10MHZ: + clock /= 2; + break; + case AR5K_BWMODE_5MHZ: + clock /= 4; + break; + default: + break; + } + + common->clockrate = clock; + + /* + * Set USEC parameters + */ + /* Set USEC counter on PCU*/ + usec = clock - 1; + usec = AR5K_REG_SM(usec, AR5K_USEC_1); + + /* Set usec duration on DCU */ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC, + AR5K_DCU_GBL_IFS_MISC_USEC_DUR, + clock); + + /* Set 32MHz USEC counter */ + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF2413) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_radio == AR5K_RF2317)) + /* Remain on 40MHz clock ? */ + sclock = 40 - 1; + else + sclock = 32 - 1; + sclock = AR5K_REG_SM(sclock, AR5K_USEC_32); + + /* + * Set tx/rx latencies + */ + usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211); + txlat = AR5K_REG_MS(usec_reg, AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211); + + /* + * Set default Tx frame to Tx data start delay + */ + txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT; + + /* + * 5210 initvals don't include usec settings + * so we need to use magic values here for + * tx/rx latencies + */ + if (ah->ah_version == AR5K_AR5210) { + /* same for turbo */ + txlat = AR5K_INIT_TX_LATENCY_5210; + rxlat = AR5K_INIT_RX_LATENCY_5210; + } + + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + /* 5311 has different tx/rx latency masks + * from 5211, since we deal 5311 the same + * as 5211 when setting initvals, shift + * values here to their proper locations + * + * Note: Initvals indicate tx/rx/ latencies + * are the same for turbo mode */ + txlat = AR5K_REG_SM(txlat, AR5K_USEC_TX_LATENCY_5210); + rxlat = AR5K_REG_SM(rxlat, AR5K_USEC_RX_LATENCY_5210); + } else + switch (ah->ah_bwmode) { + case AR5K_BWMODE_10MHZ: + txlat = AR5K_REG_SM(txlat * 2, + AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_10MHZ; + break; + case AR5K_BWMODE_5MHZ: + txlat = AR5K_REG_SM(txlat * 4, + AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_5MHZ; + break; + case AR5K_BWMODE_40MHZ: + txlat = AR5K_INIT_TX_LAT_MIN; + rxlat = AR5K_REG_SM(rxlat / 2, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT; + break; + default: + break; + } + + usec_reg = (usec | sclock | txlat | rxlat); + ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC); + + /* On 5112 set tx frame to tx data start delay */ + if (ah->ah_radio == AR5K_RF5112) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2, + AR5K_PHY_RF_CTL2_TXF2TXD_START, + txf2txs); + } +} + +/** + * ath5k_hw_set_sleep_clock() - Setup sleep clock operation + * @ah: The &struct ath5k_hw + * @enable: Enable sleep clock operation (false to disable) + * + * If there is an external 32KHz crystal available, use it + * as ref. clock instead of 32/40MHz clock and baseband clocks + * to save power during sleep or restore normal 32/40MHz + * operation. + * + * NOTE: When operating on 32KHz certain PHY registers (27 - 31, + * 123 - 127) require delay on access. + */ +static void +ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 scal, spending, sclock; + + /* Only set 32KHz settings if we have an external + * 32KHz crystal present */ + if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) || + AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) && + enable) { + + /* 1 usec/cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1); + /* Set up tsf increment on each cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61); + + /* Set baseband sleep control registers + * and sleep control rate */ + ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + spending = 0x14; + else + spending = 0x18; + ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { + ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY); + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02); + } else { + ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY); + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03); + } + + /* Enable sleep clock operation */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_EN); + + } else { + + /* Disable sleep clock operation and + * restore default parameters */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_EN); + + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0); + + /* Set DAC/ADC delays */ + ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); + ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); + + if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) + scal = AR5K_PHY_SCAL_32MHZ_2417; + else if (ee->ee_is_hb63) + scal = AR5K_PHY_SCAL_32MHZ_HB63; + else + scal = AR5K_PHY_SCAL_32MHZ; + ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL); + + ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + spending = 0x14; + else + spending = 0x18; + ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); + + /* Set up tsf increment on each cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_radio == AR5K_RF2317)) + sclock = 40 - 1; + else + sclock = 32 - 1; + AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, sclock); + } +} + + +/*********************\ +* Reset/Sleep control * +\*********************/ + +/** + * ath5k_hw_nic_reset() - Reset the various chipset units + * @ah: The &struct ath5k_hw + * @val: Mask to indicate what units to reset + * + * To reset the various chipset units we need to write + * the mask to AR5K_RESET_CTL and poll the register until + * all flags are cleared. + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) + */ +static int +ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +{ + int ret; + u32 mask = val ? val : ~0U; + + /* Read-and-clear RX Descriptor Pointer*/ + ath5k_hw_reg_read(ah, AR5K_RXDP); + + /* + * Reset the device and wait until success + */ + ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); + + /* Wait at least 128 PCI clocks */ + usleep_range(15, 20); + + if (ah->ah_version == AR5K_AR5210) { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA + | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA + | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; + } else { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + } + + ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((val & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return ret; +} + +/** + * ath5k_hw_wisoc_reset() - Reset AHB chipset + * @ah: The &struct ath5k_hw + * @flags: Mask to indicate what units to reset + * + * Same as ath5k_hw_nic_reset but for AHB based devices + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) + */ +static int +ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) +{ + u32 mask = flags ? flags : ~0U; + u32 __iomem *reg; + u32 regval; + u32 val = 0; + + /* ah->ah_mac_srev is not available at this point yet */ + if (ah->devid >= AR5K_SREV_AR2315_R6) { + reg = (u32 __iomem *) AR5K_AR2315_RESET; + if (mask & AR5K_RESET_CTL_PCU) + val |= AR5K_AR2315_RESET_WMAC; + if (mask & AR5K_RESET_CTL_BASEBAND) + val |= AR5K_AR2315_RESET_BB_WARM; + } else { + reg = (u32 __iomem *) AR5K_AR5312_RESET; + if (to_platform_device(ah->dev)->id == 0) { + if (mask & AR5K_RESET_CTL_PCU) + val |= AR5K_AR5312_RESET_WMAC0; + if (mask & AR5K_RESET_CTL_BASEBAND) + val |= AR5K_AR5312_RESET_BB0_COLD | + AR5K_AR5312_RESET_BB0_WARM; + } else { + if (mask & AR5K_RESET_CTL_PCU) + val |= AR5K_AR5312_RESET_WMAC1; + if (mask & AR5K_RESET_CTL_BASEBAND) + val |= AR5K_AR5312_RESET_BB1_COLD | + AR5K_AR5312_RESET_BB1_WARM; + } + } + + /* Put BB/MAC into reset */ + regval = ioread32(reg); + iowrite32(regval | val, reg); + regval = ioread32(reg); + udelay(100); /* NB: should be atomic */ + + /* Bring BB/MAC out of reset */ + iowrite32(regval & ~val, reg); + regval = ioread32(reg); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((flags & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return 0; +} + +/** + * ath5k_hw_set_power_mode() - Set power mode + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_power_mode + * @set_chip: Set to true to write sleep control register + * @sleep_duration: How much time the device is allowed to sleep + * when sleep logic is enabled (in 128 microsecond increments). + * + * This function is used to configure sleep policy and allowed + * sleep modes. For more information check out the sleep control + * register on reg.h and STA_ID1. + * + * Returns 0 on success, -EIO if chip didn't wake up or -EINVAL if an invalid + * mode is requested. + */ +static int +ath5k_hw_set_power_mode(struct ath5k_hw *ah, enum ath5k_power_mode mode, + bool set_chip, u16 sleep_duration) +{ + unsigned int i; + u32 staid, data; + + staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); + + switch (mode) { + case AR5K_PM_AUTO: + staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; + fallthrough; + case AR5K_PM_NETWORK_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, + AR5K_SLEEP_CTL_SLE_ALLOW | + sleep_duration, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_FULL_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_AWAKE: + + staid &= ~AR5K_STA_ID1_PWR_SV; + + if (!set_chip) + goto commit; + + data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + + /* If card is down we 'll get 0xffff... so we + * need to clean this up before we write the register + */ + if (data & 0xffc00000) + data = 0; + else + /* Preserve sleep duration etc */ + data = data & ~AR5K_SLEEP_CTL_SLE; + + ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, + AR5K_SLEEP_CTL); + usleep_range(15, 20); + + for (i = 200; i > 0; i--) { + /* Check if the chip did wake up */ + if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_SPWR_DN) == 0) + break; + + /* Wait a bit and retry */ + usleep_range(50, 75); + ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, + AR5K_SLEEP_CTL); + } + + /* Fail if the chip didn't wake up */ + if (i == 0) + return -EIO; + + break; + + default: + return -EINVAL; + } + +commit: + ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); + + return 0; +} + +/** + * ath5k_hw_on_hold() - Put device on hold + * @ah: The &struct ath5k_hw + * + * Put MAC and Baseband on warm reset and keep that state + * (don't clean sleep control register). After this MAC + * and Baseband are disabled and a full reset is needed + * to come back. This way we save as much power as possible + * without putting the card on full sleep. + * + * Returns 0 on success or -EIO on error + */ +int +ath5k_hw_on_hold(struct ath5k_hw *ah) +{ + struct pci_dev *pdev = ah->pdev; + u32 bus_flags; + int ret; + + if (ath5k_get_bus_type(ah) == ATH_AHB) + return 0; + + /* Make sure device is awake */ + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); + return ret; + } + + /* + * Put chipset on warm reset... + * + * Note: putting PCI core on warm reset on PCI-E cards + * results card to hang and always return 0xffff... so + * we ignore that flag for PCI-E cards. On PCI cards + * this flag gets cleared after 64 PCI clocks. + */ + bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; + + if (ah->ah_version == AR5K_AR5210) { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | + AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); + usleep_range(2000, 2500); + } else { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + } + + if (ret) { + ATH5K_ERR(ah, "failed to put device on warm reset\n"); + return -EIO; + } + + /* ...wakeup again!*/ + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah, "failed to put device on hold\n"); + return ret; + } + + return ret; +} + +/** + * ath5k_hw_nic_wakeup() - Force card out of sleep + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Bring up MAC + PHY Chips and program PLL + * NOTE: Channel is NULL for the initial wakeup. + * + * Returns 0 on success, -EIO on hw failure or -EINVAL for false channel infos + */ +int +ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) +{ + struct pci_dev *pdev = ah->pdev; + u32 turbo, mode, clock, bus_flags; + int ret; + + turbo = 0; + mode = 0; + clock = 0; + + if ((ath5k_get_bus_type(ah) != ATH_AHB) || channel) { + /* Wakeup the device */ + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); + return ret; + } + } + + /* + * Put chipset on warm reset... + * + * Note: putting PCI core on warm reset on PCI-E cards + * results card to hang and always return 0xffff... so + * we ignore that flag for PCI-E cards. On PCI cards + * this flag gets cleared after 64 PCI clocks. + */ + bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; + + if (ah->ah_version == AR5K_AR5210) { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | + AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); + usleep_range(2000, 2500); + } else { + if (ath5k_get_bus_type(ah) == ATH_AHB) + ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND); + else + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + } + + if (ret) { + ATH5K_ERR(ah, "failed to reset the MAC Chip\n"); + return -EIO; + } + + /* ...wakeup again!...*/ + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah, "failed to resume the MAC Chip\n"); + return ret; + } + + /* ...reset configuration register on Wisoc ... + * ...clear reset control register and pull device out of + * warm reset on others */ + if (ath5k_get_bus_type(ah) == ATH_AHB) + ret = ath5k_hw_wisoc_reset(ah, 0); + else + ret = ath5k_hw_nic_reset(ah, 0); + + if (ret) { + ATH5K_ERR(ah, "failed to warm reset the MAC Chip\n"); + return -EIO; + } + + /* On initialization skip PLL programming since we don't have + * a channel / mode set yet */ + if (!channel) + return 0; + + if (ah->ah_version != AR5K_AR5210) { + /* + * Get channel mode flags + */ + + if (ah->ah_radio >= AR5K_RF5112) { + mode = AR5K_PHY_MODE_RAD_RF5112; + clock = AR5K_PHY_PLL_RF5112; + } else { + mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ + clock = AR5K_PHY_PLL_RF5111; /*Zero*/ + } + + if (channel->band == NL80211_BAND_2GHZ) { + mode |= AR5K_PHY_MODE_FREQ_2GHZ; + clock |= AR5K_PHY_PLL_44MHZ; + + if (channel->hw_value == AR5K_MODE_11B) { + mode |= AR5K_PHY_MODE_MOD_CCK; + } else { + /* XXX Dynamic OFDM/CCK is not supported by the + * AR5211 so we set MOD_OFDM for plain g (no + * CCK headers) operation. We need to test + * this, 5211 might support ofdm-only g after + * all, there are also initial register values + * in the code for g mode (see initvals.c). + */ + if (ah->ah_version == AR5K_AR5211) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else + mode |= AR5K_PHY_MODE_MOD_DYN; + } + } else if (channel->band == NL80211_BAND_5GHZ) { + mode |= (AR5K_PHY_MODE_FREQ_5GHZ | + AR5K_PHY_MODE_MOD_OFDM); + + /* Different PLL setting for 5413 */ + if (ah->ah_radio == AR5K_RF5413) + clock = AR5K_PHY_PLL_40MHZ_5413; + else + clock |= AR5K_PHY_PLL_40MHZ; + } else { + ATH5K_ERR(ah, "invalid radio frequency mode\n"); + return -EINVAL; + } + + /*XXX: Can bwmode be used with dynamic mode ? + * (I don't think it supports 44MHz) */ + /* On 2425 initvals TURBO_SHORT is not present */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { + turbo = AR5K_PHY_TURBO_MODE; + if (ah->ah_radio != AR5K_RF2425) + turbo |= AR5K_PHY_TURBO_SHORT; + } else if (ah->ah_bwmode != AR5K_BWMODE_DEFAULT) { + if (ah->ah_radio == AR5K_RF5413) { + mode |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ? + AR5K_PHY_MODE_HALF_RATE : + AR5K_PHY_MODE_QUARTER_RATE; + } else if (ah->ah_version == AR5K_AR5212) { + clock |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ? + AR5K_PHY_PLL_HALF_RATE : + AR5K_PHY_PLL_QUARTER_RATE; + } + } + + } else { /* Reset the device */ + + /* ...enable Atheros turbo mode if requested */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) + ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, + AR5K_PHY_TURBO); + } + + if (ah->ah_version != AR5K_AR5210) { + + /* ...update PLL if needed */ + if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) { + ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); + usleep_range(300, 350); + } + + /* ...set the PHY operating mode */ + ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); + ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); + } + + return 0; +} + + +/**************************************\ +* Post-initvals register modifications * +\**************************************/ + +/** + * ath5k_hw_tweak_initval_settings() - Tweak initial settings + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Some settings are not handled on initvals, e.g. bwmode + * settings, some phy settings, workarounds etc that in general + * don't fit anywhere else or are too small to introduce a separate + * function for each one. So we have this function to handle + * them all during reset and complete card's initialization. + */ +static void +ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + if (ah->ah_version == AR5K_AR5212 && + ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { + + /* Setup ADC control */ + ath5k_hw_reg_write(ah, + (AR5K_REG_SM(2, + AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) | + AR5K_REG_SM(2, + AR5K_PHY_ADC_CTL_INBUFGAIN_ON) | + AR5K_PHY_ADC_CTL_PWD_DAC_OFF | + AR5K_PHY_ADC_CTL_PWD_ADC_OFF), + AR5K_PHY_ADC_CTL); + + + + /* Disable barker RSSI threshold */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL, + AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR); + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL, + AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2); + + /* Set the mute mask */ + ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); + } + + /* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B) + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH); + + /* Enable DCU double buffering */ + if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B) + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_DCU_DBL_BUF_DIS); + + /* Set fast ADC */ + if ((ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2317) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { + u32 fast_adc = true; + + if (channel->center_freq == 2462 || + channel->center_freq == 2467) + fast_adc = 0; + + /* Only update if needed */ + if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc) + ath5k_hw_reg_write(ah, fast_adc, + AR5K_PHY_FAST_ADC); + } + + /* Fix for first revision of the RF5112 RF chipset */ + if (ah->ah_radio == AR5K_RF5112 && + ah->ah_radio_5ghz_revision < + AR5K_SREV_RAD_5112A) { + u32 data; + ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, + AR5K_PHY_CCKTXCTL); + if (channel->band == NL80211_BAND_5GHZ) + data = 0xffb81020; + else + data = 0xffb80d20; + ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); + } + + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + /* Clear QCU/DCU clock gating register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT); + /* Set DAC/ADC delays */ + ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311, + AR5K_PHY_SCAL); + /* Enable PCU FIFO corruption ECO */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_ECO_ENABLE); + } + + if (ah->ah_bwmode) { + /* Increase PHY switch and AGC settling time + * on turbo mode (ath5k_hw_commit_eeprom_settings + * will override settling time if available) */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_AGC, + AR5K_AGC_SETTLING_TURBO); + + /* XXX: Initvals indicate we only increase + * switch time on AR5212, 5211 and 5210 + * only change agc time (bug?) */ + if (ah->ah_version == AR5K_AR5212) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_SWITCH, + AR5K_SWITCH_SETTLING_TURBO); + + if (ah->ah_version == AR5K_AR5210) { + /* Set Frame Control Register */ + ath5k_hw_reg_write(ah, + (AR5K_PHY_FRAME_CTL_INI | + AR5K_PHY_TURBO_MODE | + AR5K_PHY_TURBO_SHORT | 0x2020), + AR5K_PHY_FRAME_CTL_5210); + } + /* On 5413 PHY force window length for half/quarter rate*/ + } else if ((ah->ah_mac_srev >= AR5K_SREV_AR5424) && + (ah->ah_mac_srev <= AR5K_SREV_AR5414)) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL_5211, + AR5K_PHY_FRAME_CTL_WIN_LEN, + 3); + } + } else if (ah->ah_version == AR5K_AR5210) { + /* Set Frame Control Register for normal operation */ + ath5k_hw_reg_write(ah, (AR5K_PHY_FRAME_CTL_INI | 0x1020), + AR5K_PHY_FRAME_CTL_5210); + } +} + +/** + * ath5k_hw_commit_eeprom_settings() - Commit settings from EEPROM + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Use settings stored on EEPROM to properly initialize the card + * based on various infos and per-mode calibration data. + */ +static void +ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + s16 cck_ofdm_pwr_delta; + u8 ee_mode; + + /* TODO: Add support for AR5210 EEPROM */ + if (ah->ah_version == AR5K_AR5210) + return; + + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); + + /* Adjust power delta for channel 14 */ + if (channel->center_freq == 2484) + cck_ofdm_pwr_delta = + ((ee->ee_cck_ofdm_power_delta - + ee->ee_scaled_cck_delta) * 2) / 10; + else + cck_ofdm_pwr_delta = + (ee->ee_cck_ofdm_power_delta * 2) / 10; + + /* Set CCK to OFDM power delta on tx power + * adjustment register */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { + if (channel->hw_value == AR5K_MODE_11G) + ath5k_hw_reg_write(ah, + AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1), + AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) | + AR5K_REG_SM((cck_ofdm_pwr_delta * -1), + AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX), + AR5K_PHY_TX_PWR_ADJ); + else + ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ); + } else { + /* For older revs we scale power on sw during tx power + * setup */ + ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta; + ah->ah_txpower.txp_cck_ofdm_gainf_delta = + ee->ee_cck_ofdm_gain_delta; + } + + /* XXX: necessary here? is called from ath5k_hw_set_antenna_mode() + * too */ + ath5k_hw_set_antenna_switch(ah, ee_mode); + + /* Noise floor threshold */ + ath5k_hw_reg_write(ah, + AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), + AR5K_PHY_NFTHRES); + + if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) && + (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) { + /* Switch settling time (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_SWITCH, + ee->ee_switch_settling_turbo[ee_mode]); + + /* Tx/Rx attenuation (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN, + AR5K_PHY_GAIN_TXRX_ATTEN, + ee->ee_atn_tx_rx_turbo[ee_mode]); + + /* ADC/PGA desired size (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_ADC, + ee->ee_adc_desired_size_turbo[ee_mode]); + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_PGA, + ee->ee_pga_desired_size_turbo[ee_mode]); + + /* Tx/Rx margin (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx_turbo[ee_mode]); + + } else { + /* Switch settling time */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_SWITCH, + ee->ee_switch_settling[ee_mode]); + + /* Tx/Rx attenuation */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN, + AR5K_PHY_GAIN_TXRX_ATTEN, + ee->ee_atn_tx_rx[ee_mode]); + + /* ADC/PGA desired size */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_ADC, + ee->ee_adc_desired_size[ee_mode]); + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_PGA, + ee->ee_pga_desired_size[ee_mode]); + + /* Tx/Rx margin */ + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx[ee_mode]); + } + + /* XPA delays */ + ath5k_hw_reg_write(ah, + (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | + (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | + (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | + (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); + + /* XLNA delay */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3, + AR5K_PHY_RF_CTL3_TXE2XLNA_ON, + ee->ee_tx_end2xlna_enable[ee_mode]); + + /* Thresh64 (ANI) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF, + AR5K_PHY_NF_THRESH62, + ee->ee_thr_62[ee_mode]); + + /* False detect backoff for channels + * that have spur noise. Write the new + * cyclic power RSSI threshold. */ + if (ath5k_hw_chan_has_spur_noise(ah, channel)) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, + AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, + AR5K_INIT_CYCRSSI_THR1 + + ee->ee_false_detect[ee_mode]); + else + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, + AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, + AR5K_INIT_CYCRSSI_THR1); + + /* I/Q correction (set enable bit last to match HAL sources) */ + /* TODO: Per channel i/q infos ? */ + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, + ee->ee_i_cal[ee_mode]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, + ee->ee_q_cal[ee_mode]); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE); + } + + /* Heavy clipping -disable for now */ + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1) + ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE); +} + + +/*********************\ +* Main reset function * +\*********************/ + +/** + * ath5k_hw_reset() - The main reset function + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * @channel: The &struct ieee80211_channel + * @fast: Enable fast channel switching + * @skip_pcu: Skip pcu initialization + * + * This is the function we call each time we want to (re)initialize the + * card and pass new settings to hw. We also call it when hw runs into + * trouble to make it come back to a working state. + * + * Returns 0 on success, -EINVAL on false op_mode or channel infos, or -EIO + * on failure. + */ +int +ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, + struct ieee80211_channel *channel, bool fast, bool skip_pcu) +{ + u32 s_seq[10], s_led[3], tsf_up, tsf_lo; + u8 mode; + int i, ret; + + tsf_up = 0; + tsf_lo = 0; + mode = 0; + + /* + * Sanity check for fast flag + * Fast channel change only available + * on AR2413/AR5413. + */ + if (fast && (ah->ah_radio != AR5K_RF2413) && + (ah->ah_radio != AR5K_RF5413)) + fast = false; + + /* Disable sleep clock operation + * to avoid register access delay on certain + * PHY registers */ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_set_sleep_clock(ah, false); + + mode = channel->hw_value; + switch (mode) { + case AR5K_MODE_11A: + break; + case AR5K_MODE_11G: + if (ah->ah_version <= AR5K_AR5211) { + ATH5K_ERR(ah, + "G mode not available on 5210/5211"); + return -EINVAL; + } + break; + case AR5K_MODE_11B: + if (ah->ah_version < AR5K_AR5211) { + ATH5K_ERR(ah, + "B mode not available on 5210"); + return -EINVAL; + } + break; + default: + ATH5K_ERR(ah, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } + + /* + * If driver requested fast channel change and DMA has stopped + * go on. If it fails continue with a normal reset. + */ + if (fast) { + ret = ath5k_hw_phy_init(ah, channel, mode, true); + if (ret) { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "fast chan change failed, falling back to normal reset\n"); + /* Non fatal, can happen eg. + * on mode change */ + ret = 0; + } else { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "fast chan change successful\n"); + return 0; + } + } + + /* + * Save some registers before a reset + */ + if (ah->ah_version != AR5K_AR5210) { + /* + * Save frame sequence count + * For revs. after Oahu, only save + * seq num for DCU 0 (Global seq num) + */ + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + + for (i = 0; i < 10; i++) + s_seq[i] = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DCU_SEQNUM(i)); + + } else { + s_seq[0] = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DCU_SEQNUM(0)); + } + + /* TSF accelerates on AR5211 during reset + * As a workaround save it here and restore + * it later so that it's back in time after + * reset. This way it'll get re-synced on the + * next beacon without breaking ad-hoc. + * + * On AR5212 TSF is almost preserved across a + * reset so it stays back in time anyway and + * we don't have to save/restore it. + * + * XXX: Since this breaks power saving we have + * to disable power saving until we receive the + * next beacon, so we can resync beacon timers */ + if (ah->ah_version == AR5K_AR5211) { + tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32); + } + } + + + /*GPIOs*/ + s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_LEDSTATE; + s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); + s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + + /* + * Since we are going to write rf buffer + * check if we have any pending gain_F + * optimization settings + */ + if (ah->ah_version == AR5K_AR5212 && + (ah->ah_radio <= AR5K_RF5112)) { + if (!fast && ah->ah_rf_banks != NULL) + ath5k_hw_gainf_calibrate(ah); + } + + /* Wakeup the device */ + ret = ath5k_hw_nic_wakeup(ah, channel); + if (ret) + return ret; + + /* PHY access enable */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5211) + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + else + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40, + AR5K_PHY(0)); + + /* Write initial settings */ + ret = ath5k_hw_write_initvals(ah, mode, skip_pcu); + if (ret) + return ret; + + /* Initialize core clock settings */ + ath5k_hw_init_core_clock(ah); + + /* + * Tweak initval settings for revised + * chipsets and add some more config + * bits + */ + ath5k_hw_tweak_initval_settings(ah, channel); + + /* Commit values from EEPROM */ + ath5k_hw_commit_eeprom_settings(ah, channel); + + + /* + * Restore saved values + */ + + /* Seqnum, TSF */ + if (ah->ah_version != AR5K_AR5210) { + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + for (i = 0; i < 10; i++) + ath5k_hw_reg_write(ah, s_seq[i], + AR5K_QUEUE_DCU_SEQNUM(i)); + } else { + ath5k_hw_reg_write(ah, s_seq[0], + AR5K_QUEUE_DCU_SEQNUM(0)); + } + + if (ah->ah_version == AR5K_AR5211) { + ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32); + ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32); + } + } + + /* Ledstate */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); + + /* Gpio settings */ + ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); + ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); + + /* + * Initialize PCU + */ + ath5k_hw_pcu_init(ah, op_mode); + + /* + * Initialize PHY + */ + ret = ath5k_hw_phy_init(ah, channel, mode, false); + if (ret) { + ATH5K_ERR(ah, + "failed to initialize PHY (%i) !\n", ret); + return ret; + } + + /* + * Configure QCUs/DCUs + */ + ret = ath5k_hw_init_queues(ah); + if (ret) + return ret; + + + /* + * Initialize DMA/Interrupts + */ + ath5k_hw_dma_init(ah); + + + /* + * Enable 32KHz clock function for AR5212+ chips + * Set clocks to 32KHz operation and use an + * external 32KHz crystal when sleeping if one + * exists. + * Disabled by default because it is also disabled in + * other drivers and it is known to cause stability + * issues on some devices + */ + if (ah->ah_use_32khz_clock && ah->ah_version == AR5K_AR5212 && + op_mode != NL80211_IFTYPE_AP) + ath5k_hw_set_sleep_clock(ah, true); + + /* + * Disable beacons and reset the TSF + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); + ath5k_hw_reset_tsf(ah); + return 0; +} diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h new file mode 100644 index 000000000..151935c48 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h @@ -0,0 +1,853 @@ +/* + * RF Buffer handling functions + * + * Copyright (c) 2009 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + + +/** + * DOC: RF Buffer registers + * + * There are some special registers on the RF chip + * that control various operation settings related mostly to + * the analog parts (channel, gain adjustment etc). + * + * We don't write on those registers directly but + * we send a data packet on the chip, using a special register, + * that holds all the settings we need. After we've sent the + * data packet, we write on another special register to notify hw + * to apply the settings. This is done so that control registers + * can be dynamically programmed during operation and the settings + * are applied faster on the hw. + * + * We call each data packet an "RF Bank" and all the data we write + * (all RF Banks) "RF Buffer". This file holds initial RF Buffer + * data for the different RF chips, and various info to match RF + * Buffer offsets with specific RF registers so that we can access + * them. We tweak these settings on rfregs_init function. + * + * Also check out reg.h and U.S. Patent 6677779 B1 (about buffer + * registers and control registers): + * + * https://www.google.com/patents?id=qNURAAAAEBAJ + */ + + +/** + * struct ath5k_ini_rfbuffer - Initial RF Buffer settings + * @rfb_bank: RF Bank number + * @rfb_ctrl_register: RF Buffer control register + * @rfb_mode_data: RF Buffer data for each mode + * + * Struct to hold default mode specific RF + * register values (RF Banks) for each chip. + */ +struct ath5k_ini_rfbuffer { + u8 rfb_bank; + u16 rfb_ctrl_register; + u32 rfb_mode_data[3]; +}; + +/** + * struct ath5k_rfb_field - An RF Buffer field (register/value) + * @len: Field length + * @pos: Offset on the raw packet + * @col: Used for shifting + * + * Struct to hold RF Buffer field + * infos used to access certain RF + * analog registers + */ +struct ath5k_rfb_field { + u8 len; + u16 pos; + u8 col; +}; + +/** + * struct ath5k_rf_reg - RF analog register definition + * @bank: RF Buffer Bank number + * @index: Register's index on ath5k_rf_regx_idx + * @field: The &struct ath5k_rfb_field + * + * We use this struct to define the set of RF registers + * on each chip that we want to tweak. Some RF registers + * are common between different chip versions so this saves + * us space and complexity because we can refer to an rf + * register by it's index no matter what chip we work with + * as long as it has that register. + */ +struct ath5k_rf_reg { + u8 bank; + u8 index; + struct ath5k_rfb_field field; +}; + +/** + * enum ath5k_rf_regs_idx - Map RF registers to indexes + * + * We do this to handle common bits and make our + * life easier by using an index for each register + * instead of a full rfb_field + */ +enum ath5k_rf_regs_idx { + /* BANK 2 */ + AR5K_RF_TURBO = 0, + /* BANK 6 */ + AR5K_RF_OB_2GHZ, + AR5K_RF_OB_5GHZ, + AR5K_RF_DB_2GHZ, + AR5K_RF_DB_5GHZ, + AR5K_RF_FIXED_BIAS_A, + AR5K_RF_FIXED_BIAS_B, + AR5K_RF_PWD_XPD, + AR5K_RF_XPD_SEL, + AR5K_RF_XPD_GAIN, + AR5K_RF_PD_GAIN_LO, + AR5K_RF_PD_GAIN_HI, + AR5K_RF_HIGH_VC_CP, + AR5K_RF_MID_VC_CP, + AR5K_RF_LOW_VC_CP, + AR5K_RF_PUSH_UP, + AR5K_RF_PAD2GND, + AR5K_RF_XB2_LVL, + AR5K_RF_XB5_LVL, + AR5K_RF_PWD_ICLOBUF_2G, + AR5K_RF_PWD_84, + AR5K_RF_PWD_90, + AR5K_RF_PWD_130, + AR5K_RF_PWD_131, + AR5K_RF_PWD_132, + AR5K_RF_PWD_136, + AR5K_RF_PWD_137, + AR5K_RF_PWD_138, + AR5K_RF_PWD_166, + AR5K_RF_PWD_167, + AR5K_RF_DERBY_CHAN_SEL_MODE, + /* BANK 7 */ + AR5K_RF_GAIN_I, + AR5K_RF_PLO_SEL, + AR5K_RF_RFGAIN_SEL, + AR5K_RF_RFGAIN_STEP, + AR5K_RF_WAIT_S, + AR5K_RF_WAIT_I, + AR5K_RF_MAX_TIME, + AR5K_RF_MIXVGA_OVR, + AR5K_RF_MIXGAIN_OVR, + AR5K_RF_MIXGAIN_STEP, + AR5K_RF_PD_DELAY_A, + AR5K_RF_PD_DELAY_B, + AR5K_RF_PD_DELAY_XR, + AR5K_RF_PD_PERIOD_A, + AR5K_RF_PD_PERIOD_B, + AR5K_RF_PD_PERIOD_XR, +}; + + +/*******************\ +* RF5111 (Sombrero) * +\*******************/ + +/* BANK 2 len pos col */ +#define AR5K_RF5111_RF_TURBO { 1, 3, 0 } + +/* BANK 6 len pos col */ +#define AR5K_RF5111_OB_2GHZ { 3, 119, 0 } +#define AR5K_RF5111_DB_2GHZ { 3, 122, 0 } + +#define AR5K_RF5111_OB_5GHZ { 3, 104, 0 } +#define AR5K_RF5111_DB_5GHZ { 3, 107, 0 } + +#define AR5K_RF5111_PWD_XPD { 1, 95, 0 } +#define AR5K_RF5111_XPD_GAIN { 4, 96, 0 } + +/* Access to PWD registers */ +#define AR5K_RF5111_PWD(_n) { 1, (135 - _n), 3 } + +/* BANK 7 len pos col */ +#define AR5K_RF5111_GAIN_I { 6, 29, 0 } +#define AR5K_RF5111_PLO_SEL { 1, 4, 0 } +#define AR5K_RF5111_RFGAIN_SEL { 1, 36, 0 } +#define AR5K_RF5111_RFGAIN_STEP { 6, 37, 0 } +/* Only on AR5212 BaseBand and up */ +#define AR5K_RF5111_WAIT_S { 5, 19, 0 } +#define AR5K_RF5111_WAIT_I { 5, 24, 0 } +#define AR5K_RF5111_MAX_TIME { 2, 49, 0 } + +static const struct ath5k_rf_reg rf_regs_5111[] = { + {2, AR5K_RF_TURBO, AR5K_RF5111_RF_TURBO}, + {6, AR5K_RF_OB_2GHZ, AR5K_RF5111_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF5111_DB_2GHZ}, + {6, AR5K_RF_OB_5GHZ, AR5K_RF5111_OB_5GHZ}, + {6, AR5K_RF_DB_5GHZ, AR5K_RF5111_DB_5GHZ}, + {6, AR5K_RF_PWD_XPD, AR5K_RF5111_PWD_XPD}, + {6, AR5K_RF_XPD_GAIN, AR5K_RF5111_XPD_GAIN}, + {6, AR5K_RF_PWD_84, AR5K_RF5111_PWD(84)}, + {6, AR5K_RF_PWD_90, AR5K_RF5111_PWD(90)}, + {7, AR5K_RF_GAIN_I, AR5K_RF5111_GAIN_I}, + {7, AR5K_RF_PLO_SEL, AR5K_RF5111_PLO_SEL}, + {7, AR5K_RF_RFGAIN_SEL, AR5K_RF5111_RFGAIN_SEL}, + {7, AR5K_RF_RFGAIN_STEP, AR5K_RF5111_RFGAIN_STEP}, + {7, AR5K_RF_WAIT_S, AR5K_RF5111_WAIT_S}, + {7, AR5K_RF_WAIT_I, AR5K_RF5111_WAIT_I}, + {7, AR5K_RF_MAX_TIME, AR5K_RF5111_MAX_TIME} +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_5111[] = { + /* BANK / C.R. A/XR B G */ + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00380000, 0x00380000, 0x00380000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, { 0x00000000, 0x000000c0, 0x00000080 } }, + { 0, 0x989c, { 0x000400f9, 0x000400ff, 0x000400fd } }, + { 0, 0x98d4, { 0x00000000, 0x00000004, 0x00000004 } }, + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d4, { 0x00000010, 0x00000010, 0x00000010 } }, + { 3, 0x98d8, { 0x00601068, 0x00601068, 0x00601068 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, { 0x04000000, 0x04000000, 0x04000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x0a000000, 0x00000000 } }, + { 6, 0x989c, { 0x003800c0, 0x023800c0, 0x003800c0 } }, + { 6, 0x989c, { 0x00020006, 0x00000006, 0x00020006 } }, + { 6, 0x989c, { 0x00000089, 0x00000089, 0x00000089 } }, + { 6, 0x989c, { 0x000000a0, 0x000000a0, 0x000000a0 } }, + { 6, 0x989c, { 0x00040007, 0x00040007, 0x00040007 } }, + { 6, 0x98d4, { 0x0000001a, 0x0000001a, 0x0000001a } }, + { 7, 0x989c, { 0x00000040, 0x00000040, 0x00000040 } }, + { 7, 0x989c, { 0x00000010, 0x00000010, 0x00000010 } }, + { 7, 0x989c, { 0x00000008, 0x00000008, 0x00000008 } }, + { 7, 0x989c, { 0x0000004f, 0x0000004f, 0x0000004f } }, + { 7, 0x989c, { 0x000000f1, 0x00000061, 0x000000f1 } }, + { 7, 0x989c, { 0x0000904f, 0x0000904c, 0x0000904f } }, + { 7, 0x989c, { 0x0000125a, 0x0000129a, 0x0000125a } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000f, 0x0000000e } }, +}; + + + +/***********************\ +* RF5112/RF2112 (Derby) * +\***********************/ + +/* BANK 2 (Common) len pos col */ +#define AR5K_RF5112X_RF_TURBO { 1, 1, 2 } + +/* BANK 7 (Common) len pos col */ +#define AR5K_RF5112X_GAIN_I { 6, 14, 0 } +#define AR5K_RF5112X_MIXVGA_OVR { 1, 36, 0 } +#define AR5K_RF5112X_MIXGAIN_OVR { 2, 37, 0 } +#define AR5K_RF5112X_MIXGAIN_STEP { 4, 32, 0 } +#define AR5K_RF5112X_PD_DELAY_A { 4, 58, 0 } +#define AR5K_RF5112X_PD_DELAY_B { 4, 62, 0 } +#define AR5K_RF5112X_PD_DELAY_XR { 4, 66, 0 } +#define AR5K_RF5112X_PD_PERIOD_A { 4, 70, 0 } +#define AR5K_RF5112X_PD_PERIOD_B { 4, 74, 0 } +#define AR5K_RF5112X_PD_PERIOD_XR { 4, 78, 0 } + +/* RFX112 (Derby 1) */ + +/* BANK 6 len pos col */ +#define AR5K_RF5112_OB_2GHZ { 3, 269, 0 } +#define AR5K_RF5112_DB_2GHZ { 3, 272, 0 } + +#define AR5K_RF5112_OB_5GHZ { 3, 261, 0 } +#define AR5K_RF5112_DB_5GHZ { 3, 264, 0 } + +#define AR5K_RF5112_FIXED_BIAS_A { 1, 260, 0 } +#define AR5K_RF5112_FIXED_BIAS_B { 1, 259, 0 } + +#define AR5K_RF5112_XPD_SEL { 1, 284, 0 } +#define AR5K_RF5112_XPD_GAIN { 2, 252, 0 } + +/* Access to PWD registers */ +#define AR5K_RF5112_PWD(_n) { 1, (302 - _n), 3 } + +static const struct ath5k_rf_reg rf_regs_5112[] = { + {2, AR5K_RF_TURBO, AR5K_RF5112X_RF_TURBO}, + {6, AR5K_RF_OB_2GHZ, AR5K_RF5112_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF5112_DB_2GHZ}, + {6, AR5K_RF_OB_5GHZ, AR5K_RF5112_OB_5GHZ}, + {6, AR5K_RF_DB_5GHZ, AR5K_RF5112_DB_5GHZ}, + {6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112_FIXED_BIAS_A}, + {6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112_FIXED_BIAS_B}, + {6, AR5K_RF_XPD_SEL, AR5K_RF5112_XPD_SEL}, + {6, AR5K_RF_XPD_GAIN, AR5K_RF5112_XPD_GAIN}, + {6, AR5K_RF_PWD_130, AR5K_RF5112_PWD(130)}, + {6, AR5K_RF_PWD_131, AR5K_RF5112_PWD(131)}, + {6, AR5K_RF_PWD_132, AR5K_RF5112_PWD(132)}, + {6, AR5K_RF_PWD_136, AR5K_RF5112_PWD(136)}, + {6, AR5K_RF_PWD_137, AR5K_RF5112_PWD(137)}, + {6, AR5K_RF_PWD_138, AR5K_RF5112_PWD(138)}, + {7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I}, + {7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR}, + {7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR}, + {7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP}, + {7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A}, + {7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B}, + {7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR}, + {7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A}, + {7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B}, + {7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR}, +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_5112[] = { + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x03060408, 0x03060408, 0x03060408 } }, + { 3, 0x98dc, { 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, + { 6, 0x989c, { 0x00a00000, 0x00a00000, 0x00a00000 } }, + { 6, 0x989c, { 0x000a0000, 0x000a0000, 0x000a0000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00660000, 0x00660000, 0x00660000 } }, + { 6, 0x989c, { 0x00db0000, 0x00db0000, 0x00db0000 } }, + { 6, 0x989c, { 0x00f10000, 0x00f10000, 0x00f10000 } }, + { 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x008b0000, 0x008b0000, 0x008b0000 } }, + { 6, 0x989c, { 0x00600000, 0x00600000, 0x00600000 } }, + { 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, { 0x00840000, 0x00840000, 0x00840000 } }, + { 6, 0x989c, { 0x00640000, 0x00640000, 0x00640000 } }, + { 6, 0x989c, { 0x00200000, 0x00200000, 0x00200000 } }, + { 6, 0x989c, { 0x00240000, 0x00240000, 0x00240000 } }, + { 6, 0x989c, { 0x00250000, 0x00250000, 0x00250000 } }, + { 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, { 0x00510000, 0x00510000, 0x00510000 } }, + { 6, 0x989c, { 0x1c040000, 0x1c040000, 0x1c040000 } }, + { 6, 0x989c, { 0x000a0000, 0x000a0000, 0x000a0000 } }, + { 6, 0x989c, { 0x00a10000, 0x00a10000, 0x00a10000 } }, + { 6, 0x989c, { 0x00400000, 0x00400000, 0x00400000 } }, + { 6, 0x989c, { 0x03090000, 0x03090000, 0x03090000 } }, + { 6, 0x989c, { 0x06000000, 0x06000000, 0x06000000 } }, + { 6, 0x989c, { 0x000000b0, 0x000000a8, 0x000000a8 } }, + { 6, 0x989c, { 0x0000002e, 0x0000002e, 0x0000002e } }, + { 6, 0x989c, { 0x006c4a41, 0x006c4af1, 0x006c4a61 } }, + { 6, 0x989c, { 0x0050892a, 0x0050892b, 0x0050892b } }, + { 6, 0x989c, { 0x00842400, 0x00842400, 0x00842400 } }, + { 6, 0x989c, { 0x00c69200, 0x00c69200, 0x00c69200 } }, + { 6, 0x98d0, { 0x0002000c, 0x0002000c, 0x0002000c } }, + { 7, 0x989c, { 0x00000094, 0x00000094, 0x00000094 } }, + { 7, 0x989c, { 0x00000091, 0x00000091, 0x00000091 } }, + { 7, 0x989c, { 0x0000000a, 0x00000012, 0x00000012 } }, + { 7, 0x989c, { 0x00000080, 0x00000080, 0x00000080 } }, + { 7, 0x989c, { 0x000000c1, 0x000000c1, 0x000000c1 } }, + { 7, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } }, + { 7, 0x989c, { 0x000000f0, 0x000000f0, 0x000000f0 } }, + { 7, 0x989c, { 0x00000022, 0x00000022, 0x00000022 } }, + { 7, 0x989c, { 0x00000092, 0x00000092, 0x00000092 } }, + { 7, 0x989c, { 0x000000d4, 0x000000d4, 0x000000d4 } }, + { 7, 0x989c, { 0x000014cc, 0x000014cc, 0x000014cc } }, + { 7, 0x989c, { 0x0000048c, 0x0000048c, 0x0000048c } }, + { 7, 0x98c4, { 0x00000003, 0x00000003, 0x00000003 } }, +}; + +/* RFX112A (Derby 2) */ + +/* BANK 6 len pos col */ +#define AR5K_RF5112A_OB_2GHZ { 3, 287, 0 } +#define AR5K_RF5112A_DB_2GHZ { 3, 290, 0 } + +#define AR5K_RF5112A_OB_5GHZ { 3, 279, 0 } +#define AR5K_RF5112A_DB_5GHZ { 3, 282, 0 } + +#define AR5K_RF5112A_FIXED_BIAS_A { 1, 278, 0 } +#define AR5K_RF5112A_FIXED_BIAS_B { 1, 277, 0 } + +#define AR5K_RF5112A_XPD_SEL { 1, 302, 0 } +#define AR5K_RF5112A_PDGAINLO { 2, 270, 0 } +#define AR5K_RF5112A_PDGAINHI { 2, 257, 0 } + +/* Access to PWD registers */ +#define AR5K_RF5112A_PWD(_n) { 1, (306 - _n), 3 } + +/* Voltage regulators */ +#define AR5K_RF5112A_HIGH_VC_CP { 2, 90, 2 } +#define AR5K_RF5112A_MID_VC_CP { 2, 92, 2 } +#define AR5K_RF5112A_LOW_VC_CP { 2, 94, 2 } +#define AR5K_RF5112A_PUSH_UP { 1, 254, 2 } + +/* Power consumption */ +#define AR5K_RF5112A_PAD2GND { 1, 281, 1 } +#define AR5K_RF5112A_XB2_LVL { 2, 1, 3 } +#define AR5K_RF5112A_XB5_LVL { 2, 3, 3 } + +static const struct ath5k_rf_reg rf_regs_5112a[] = { + {2, AR5K_RF_TURBO, AR5K_RF5112X_RF_TURBO}, + {6, AR5K_RF_OB_2GHZ, AR5K_RF5112A_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF5112A_DB_2GHZ}, + {6, AR5K_RF_OB_5GHZ, AR5K_RF5112A_OB_5GHZ}, + {6, AR5K_RF_DB_5GHZ, AR5K_RF5112A_DB_5GHZ}, + {6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112A_FIXED_BIAS_A}, + {6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112A_FIXED_BIAS_B}, + {6, AR5K_RF_XPD_SEL, AR5K_RF5112A_XPD_SEL}, + {6, AR5K_RF_PD_GAIN_LO, AR5K_RF5112A_PDGAINLO}, + {6, AR5K_RF_PD_GAIN_HI, AR5K_RF5112A_PDGAINHI}, + {6, AR5K_RF_PWD_130, AR5K_RF5112A_PWD(130)}, + {6, AR5K_RF_PWD_131, AR5K_RF5112A_PWD(131)}, + {6, AR5K_RF_PWD_132, AR5K_RF5112A_PWD(132)}, + {6, AR5K_RF_PWD_136, AR5K_RF5112A_PWD(136)}, + {6, AR5K_RF_PWD_137, AR5K_RF5112A_PWD(137)}, + {6, AR5K_RF_PWD_138, AR5K_RF5112A_PWD(138)}, + {6, AR5K_RF_PWD_166, AR5K_RF5112A_PWD(166)}, + {6, AR5K_RF_PWD_167, AR5K_RF5112A_PWD(167)}, + {6, AR5K_RF_HIGH_VC_CP, AR5K_RF5112A_HIGH_VC_CP}, + {6, AR5K_RF_MID_VC_CP, AR5K_RF5112A_MID_VC_CP}, + {6, AR5K_RF_LOW_VC_CP, AR5K_RF5112A_LOW_VC_CP}, + {6, AR5K_RF_PUSH_UP, AR5K_RF5112A_PUSH_UP}, + {6, AR5K_RF_PAD2GND, AR5K_RF5112A_PAD2GND}, + {6, AR5K_RF_XB2_LVL, AR5K_RF5112A_XB2_LVL}, + {6, AR5K_RF_XB5_LVL, AR5K_RF5112A_XB5_LVL}, + {7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I}, + {7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR}, + {7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR}, + {7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP}, + {7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A}, + {7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B}, + {7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR}, + {7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A}, + {7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B}, + {7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR}, +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_5112a[] = { + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x03060408, 0x03060408, 0x03060408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x0f000000, 0x0f000000, 0x0f000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00800000, 0x00800000, 0x00800000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00010000, 0x00010000, 0x00010000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00180000, 0x00180000, 0x00180000 } }, + { 6, 0x989c, { 0x00600000, 0x006e0000, 0x006e0000 } }, + { 6, 0x989c, { 0x00c70000, 0x00c70000, 0x00c70000 } }, + { 6, 0x989c, { 0x004b0000, 0x004b0000, 0x004b0000 } }, + { 6, 0x989c, { 0x04480000, 0x04480000, 0x04480000 } }, + { 6, 0x989c, { 0x004c0000, 0x004c0000, 0x004c0000 } }, + { 6, 0x989c, { 0x00e40000, 0x00e40000, 0x00e40000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x043f0000, 0x043f0000, 0x043f0000 } }, + { 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, { 0x02190000, 0x02190000, 0x02190000 } }, + { 6, 0x989c, { 0x00240000, 0x00240000, 0x00240000 } }, + { 6, 0x989c, { 0x00b40000, 0x00b40000, 0x00b40000 } }, + { 6, 0x989c, { 0x00990000, 0x00990000, 0x00990000 } }, + { 6, 0x989c, { 0x00500000, 0x00500000, 0x00500000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, { 0xc0320000, 0xc0320000, 0xc0320000 } }, + { 6, 0x989c, { 0x01740000, 0x01740000, 0x01740000 } }, + { 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, { 0x86280000, 0x86280000, 0x86280000 } }, + { 6, 0x989c, { 0x31840000, 0x31840000, 0x31840000 } }, + { 6, 0x989c, { 0x00f20080, 0x00f20080, 0x00f20080 } }, + { 6, 0x989c, { 0x00270019, 0x00270019, 0x00270019 } }, + { 6, 0x989c, { 0x00000003, 0x00000003, 0x00000003 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x000000b2, 0x000000b2, 0x000000b2 } }, + { 6, 0x989c, { 0x00b02084, 0x00b02084, 0x00b02084 } }, + { 6, 0x989c, { 0x004125a4, 0x004125a4, 0x004125a4 } }, + { 6, 0x989c, { 0x00119220, 0x00119220, 0x00119220 } }, + { 6, 0x989c, { 0x001a4800, 0x001a4800, 0x001a4800 } }, + { 6, 0x98d8, { 0x000b0230, 0x000b0230, 0x000b0230 } }, + { 7, 0x989c, { 0x00000094, 0x00000094, 0x00000094 } }, + { 7, 0x989c, { 0x00000091, 0x00000091, 0x00000091 } }, + { 7, 0x989c, { 0x00000012, 0x00000012, 0x00000012 } }, + { 7, 0x989c, { 0x00000080, 0x00000080, 0x00000080 } }, + { 7, 0x989c, { 0x000000d9, 0x000000d9, 0x000000d9 } }, + { 7, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } }, + { 7, 0x989c, { 0x000000f0, 0x000000f0, 0x000000f0 } }, + { 7, 0x989c, { 0x000000a2, 0x000000a2, 0x000000a2 } }, + { 7, 0x989c, { 0x00000052, 0x00000052, 0x00000052 } }, + { 7, 0x989c, { 0x000000d4, 0x000000d4, 0x000000d4 } }, + { 7, 0x989c, { 0x000014cc, 0x000014cc, 0x000014cc } }, + { 7, 0x989c, { 0x0000048c, 0x0000048c, 0x0000048c } }, + { 7, 0x98c4, { 0x00000003, 0x00000003, 0x00000003 } }, +}; + + + +/******************\ +* RF2413 (Griffin) * +\******************/ + +/* BANK 2 len pos col */ +#define AR5K_RF2413_RF_TURBO { 1, 1, 2 } + +/* BANK 6 len pos col */ +#define AR5K_RF2413_OB_2GHZ { 3, 168, 0 } +#define AR5K_RF2413_DB_2GHZ { 3, 165, 0 } + +static const struct ath5k_rf_reg rf_regs_2413[] = { + {2, AR5K_RF_TURBO, AR5K_RF2413_RF_TURBO}, + {6, AR5K_RF_OB_2GHZ, AR5K_RF2413_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF2413_DB_2GHZ}, +}; + +/* Default mode specific settings + * XXX: a/aTurbo ??? + */ +static const struct ath5k_ini_rfbuffer rfb_2413[] = { + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0xf0000000, 0xf0000000, 0xf0000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x03000000, 0x03000000, 0x03000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x40400000, 0x40400000, 0x40400000 } }, + { 6, 0x989c, { 0x65050000, 0x65050000, 0x65050000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00420000, 0x00420000, 0x00420000 } }, + { 6, 0x989c, { 0x00b50000, 0x00b50000, 0x00b50000 } }, + { 6, 0x989c, { 0x00030000, 0x00030000, 0x00030000 } }, + { 6, 0x989c, { 0x00f70000, 0x00f70000, 0x00f70000 } }, + { 6, 0x989c, { 0x009d0000, 0x009d0000, 0x009d0000 } }, + { 6, 0x989c, { 0x00220000, 0x00220000, 0x00220000 } }, + { 6, 0x989c, { 0x04220000, 0x04220000, 0x04220000 } }, + { 6, 0x989c, { 0x00230018, 0x00230018, 0x00230018 } }, + { 6, 0x989c, { 0x00280000, 0x00280060, 0x00280060 } }, + { 6, 0x989c, { 0x005000c0, 0x005000c3, 0x005000c3 } }, + { 6, 0x989c, { 0x0004007f, 0x0004007f, 0x0004007f } }, + { 6, 0x989c, { 0x00000458, 0x00000458, 0x00000458 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x0000c000, 0x0000c000, 0x0000c000 } }, + { 6, 0x98d8, { 0x00400230, 0x00400230, 0x00400230 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + + + +/***************************\ +* RF2315/RF2316 (Cobra SoC) * +\***************************/ + +/* BANK 2 len pos col */ +#define AR5K_RF2316_RF_TURBO { 1, 1, 2 } + +/* BANK 6 len pos col */ +#define AR5K_RF2316_OB_2GHZ { 3, 178, 0 } +#define AR5K_RF2316_DB_2GHZ { 3, 175, 0 } + +static const struct ath5k_rf_reg rf_regs_2316[] = { + {2, AR5K_RF_TURBO, AR5K_RF2316_RF_TURBO}, + {6, AR5K_RF_OB_2GHZ, AR5K_RF2316_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF2316_DB_2GHZ}, +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_2316[] = { + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0xc0000000, 0xc0000000, 0xc0000000 } }, + { 6, 0x989c, { 0x0f000000, 0x0f000000, 0x0f000000 } }, + { 6, 0x989c, { 0x02000000, 0x02000000, 0x02000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0xf8000000, 0xf8000000, 0xf8000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x95150000, 0x95150000, 0x95150000 } }, + { 6, 0x989c, { 0xc1000000, 0xc1000000, 0xc1000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00080000, 0x00080000, 0x00080000 } }, + { 6, 0x989c, { 0x00d50000, 0x00d50000, 0x00d50000 } }, + { 6, 0x989c, { 0x000e0000, 0x000e0000, 0x000e0000 } }, + { 6, 0x989c, { 0x00dc0000, 0x00dc0000, 0x00dc0000 } }, + { 6, 0x989c, { 0x00770000, 0x00770000, 0x00770000 } }, + { 6, 0x989c, { 0x008a0000, 0x008a0000, 0x008a0000 } }, + { 6, 0x989c, { 0x10880000, 0x10880000, 0x10880000 } }, + { 6, 0x989c, { 0x008c0060, 0x008c0060, 0x008c0060 } }, + { 6, 0x989c, { 0x00a00000, 0x00a00080, 0x00a00080 } }, + { 6, 0x989c, { 0x00400000, 0x0040000d, 0x0040000d } }, + { 6, 0x989c, { 0x00110400, 0x00110400, 0x00110400 } }, + { 6, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } }, + { 6, 0x989c, { 0x00000001, 0x00000001, 0x00000001 } }, + { 6, 0x989c, { 0x00000b00, 0x00000b00, 0x00000b00 } }, + { 6, 0x989c, { 0x00000be8, 0x00000be8, 0x00000be8 } }, + { 6, 0x98c0, { 0x00010000, 0x00010000, 0x00010000 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + + + +/******************************\ +* RF5413/RF5424 (Eagle/Condor) * +\******************************/ + +/* BANK 6 len pos col */ +#define AR5K_RF5413_OB_2GHZ { 3, 241, 0 } +#define AR5K_RF5413_DB_2GHZ { 3, 238, 0 } + +#define AR5K_RF5413_OB_5GHZ { 3, 247, 0 } +#define AR5K_RF5413_DB_5GHZ { 3, 244, 0 } + +#define AR5K_RF5413_PWD_ICLOBUF2G { 3, 131, 3 } +#define AR5K_RF5413_DERBY_CHAN_SEL_MODE { 1, 291, 2 } + +static const struct ath5k_rf_reg rf_regs_5413[] = { + {6, AR5K_RF_OB_2GHZ, AR5K_RF5413_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF5413_DB_2GHZ}, + {6, AR5K_RF_OB_5GHZ, AR5K_RF5413_OB_5GHZ}, + {6, AR5K_RF_DB_5GHZ, AR5K_RF5413_DB_5GHZ}, + {6, AR5K_RF_PWD_ICLOBUF_2G, AR5K_RF5413_PWD_ICLOBUF2G}, + {6, AR5K_RF_DERBY_CHAN_SEL_MODE, AR5K_RF5413_DERBY_CHAN_SEL_MODE}, +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_5413[] = { + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x00000008, 0x00000008, 0x00000008 } }, + { 3, 0x98dc, { 0x00a000c0, 0x00e000c0, 0x00e000c0 } }, + { 6, 0x989c, { 0x33000000, 0x33000000, 0x33000000 } }, + { 6, 0x989c, { 0x01000000, 0x01000000, 0x01000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x1f000000, 0x1f000000, 0x1f000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00b80000, 0x00b80000, 0x00b80000 } }, + { 6, 0x989c, { 0x00b70000, 0x00b70000, 0x00b70000 } }, + { 6, 0x989c, { 0x00840000, 0x00840000, 0x00840000 } }, + { 6, 0x989c, { 0x00980000, 0x00980000, 0x00980000 } }, + { 6, 0x989c, { 0x00c00000, 0x00c00000, 0x00c00000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, { 0x00d70000, 0x00d70000, 0x00d70000 } }, + { 6, 0x989c, { 0x00610000, 0x00610000, 0x00610000 } }, + { 6, 0x989c, { 0x00fe0000, 0x00fe0000, 0x00fe0000 } }, + { 6, 0x989c, { 0x00de0000, 0x00de0000, 0x00de0000 } }, + { 6, 0x989c, { 0x007f0000, 0x007f0000, 0x007f0000 } }, + { 6, 0x989c, { 0x043d0000, 0x043d0000, 0x043d0000 } }, + { 6, 0x989c, { 0x00770000, 0x00770000, 0x00770000 } }, + { 6, 0x989c, { 0x00440000, 0x00440000, 0x00440000 } }, + { 6, 0x989c, { 0x00980000, 0x00980000, 0x00980000 } }, + { 6, 0x989c, { 0x00100080, 0x00100080, 0x00100080 } }, + { 6, 0x989c, { 0x0005c034, 0x0005c034, 0x0005c034 } }, + { 6, 0x989c, { 0x003100f0, 0x003100f0, 0x003100f0 } }, + { 6, 0x989c, { 0x000c011f, 0x000c011f, 0x000c011f } }, + { 6, 0x989c, { 0x00510040, 0x00510040, 0x00510040 } }, + { 6, 0x989c, { 0x005000da, 0x005000da, 0x005000da } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00004044, 0x00004044, 0x00004044 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x000060c0, 0x000060c0, 0x000060c0 } }, + { 6, 0x989c, { 0x00002c00, 0x00003600, 0x00003600 } }, + { 6, 0x98c8, { 0x00000403, 0x00040403, 0x00040403 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + + + +/***************************\ +* RF2425/RF2417 (Swan/Nala) * +* AR2317 (Spider SoC) * +\***************************/ + +/* BANK 2 len pos col */ +#define AR5K_RF2425_RF_TURBO { 1, 1, 2 } + +/* BANK 6 len pos col */ +#define AR5K_RF2425_OB_2GHZ { 3, 193, 0 } +#define AR5K_RF2425_DB_2GHZ { 3, 190, 0 } + +static const struct ath5k_rf_reg rf_regs_2425[] = { + {2, AR5K_RF_TURBO, AR5K_RF2425_RF_TURBO}, + {6, AR5K_RF_OB_2GHZ, AR5K_RF2425_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF2425_DB_2GHZ}, +}; + +/* Default mode specific settings + */ +static const struct ath5k_ini_rfbuffer rfb_2425[] = { + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } }, + { 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } }, + { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } }, + { 6, 0x989c, { 0x00e70000, 0x00e70000, 0x00e70000 } }, + { 6, 0x989c, { 0x00140000, 0x00140000, 0x00140000 } }, + { 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } }, + { 6, 0x989c, { 0x0007001a, 0x0007001a, 0x0007001a } }, + { 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } }, + { 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } }, + { 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } }, + { 6, 0x989c, { 0x00001688, 0x00001688, 0x00001688 } }, + { 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + +/* + * TODO: Handle the few differences with swan during + * bank modification and get rid of this + */ +static const struct ath5k_ini_rfbuffer rfb_2317[] = { + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } }, + { 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } }, + { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } }, + { 6, 0x989c, { 0x00e70000, 0x00e70000, 0x00e70000 } }, + { 6, 0x989c, { 0x00140100, 0x00140100, 0x00140100 } }, + { 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } }, + { 6, 0x989c, { 0x0007001a, 0x0007001a, 0x0007001a } }, + { 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } }, + { 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } }, + { 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } }, + { 6, 0x989c, { 0x00009688, 0x00009688, 0x00009688 } }, + { 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + +/* + * TODO: Handle the few differences with swan during + * bank modification and get rid of this + */ +static const struct ath5k_ini_rfbuffer rfb_2417[] = { + /* BANK / C.R. A/XR B G */ + { 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } }, + { 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } }, + { 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } }, + { 6, 0x989c, { 0x00e70000, 0x80e70000, 0x80e70000 } }, + { 6, 0x989c, { 0x00140000, 0x00140000, 0x00140000 } }, + { 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } }, + { 6, 0x989c, { 0x0007001a, 0x0207001a, 0x0207001a } }, + { 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } }, + { 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } }, + { 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } }, + { 6, 0x989c, { 0x00001688, 0x00001688, 0x00001688 } }, + { 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } }, + { 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } }, +}; diff --git a/drivers/net/wireless/ath/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h new file mode 100644 index 000000000..4d21df0e5 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/rfgain.h @@ -0,0 +1,534 @@ +/* + * RF Gain optimization + * + * Copyright (c) 2004-2009 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/** + * struct ath5k_ini_rfgain - RF Gain table + * @rfg_register: RF Gain register address + * @rfg_value: Register value for 5 and 2GHz + * + * Mode-specific RF Gain table (64bytes) for RF5111/5112 + * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial + * RF Gain values are included in AR5K_AR5210_INI) + */ +struct ath5k_ini_rfgain { + u16 rfg_register; + u32 rfg_value[2]; /* [freq (see below)] */ +}; + +/* Initial RF Gain settings for RF5111 */ +static const struct ath5k_ini_rfgain rfgain_5111[] = { + /* 5GHz 2GHz */ + { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } }, + { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } }, + { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } }, + { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } }, + { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } }, + { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } }, + { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } }, + { AR5K_RF_GAIN(10), { 0x000001e5, 0x00000188 } }, + { AR5K_RF_GAIN(11), { 0x00000025, 0x000001c8 } }, + { AR5K_RF_GAIN(12), { 0x000001c8, 0x00000014 } }, + { AR5K_RF_GAIN(13), { 0x00000008, 0x00000042 } }, + { AR5K_RF_GAIN(14), { 0x00000048, 0x00000082 } }, + { AR5K_RF_GAIN(15), { 0x00000088, 0x00000178 } }, + { AR5K_RF_GAIN(16), { 0x00000198, 0x000001b8 } }, + { AR5K_RF_GAIN(17), { 0x000001d8, 0x000001f8 } }, + { AR5K_RF_GAIN(18), { 0x00000018, 0x00000012 } }, + { AR5K_RF_GAIN(19), { 0x00000058, 0x00000052 } }, + { AR5K_RF_GAIN(20), { 0x00000098, 0x00000092 } }, + { AR5K_RF_GAIN(21), { 0x000001a4, 0x0000017c } }, + { AR5K_RF_GAIN(22), { 0x000001e4, 0x000001bc } }, + { AR5K_RF_GAIN(23), { 0x00000024, 0x000001fc } }, + { AR5K_RF_GAIN(24), { 0x00000064, 0x0000000a } }, + { AR5K_RF_GAIN(25), { 0x000000a4, 0x0000004a } }, + { AR5K_RF_GAIN(26), { 0x000000e4, 0x0000008a } }, + { AR5K_RF_GAIN(27), { 0x0000010a, 0x0000015a } }, + { AR5K_RF_GAIN(28), { 0x0000014a, 0x0000019a } }, + { AR5K_RF_GAIN(29), { 0x0000018a, 0x000001da } }, + { AR5K_RF_GAIN(30), { 0x000001ca, 0x0000000e } }, + { AR5K_RF_GAIN(31), { 0x0000000a, 0x0000004e } }, + { AR5K_RF_GAIN(32), { 0x0000004a, 0x0000008e } }, + { AR5K_RF_GAIN(33), { 0x0000008a, 0x0000015e } }, + { AR5K_RF_GAIN(34), { 0x000001ba, 0x0000019e } }, + { AR5K_RF_GAIN(35), { 0x000001fa, 0x000001de } }, + { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000009 } }, + { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000049 } }, + { AR5K_RF_GAIN(38), { 0x00000186, 0x00000089 } }, + { AR5K_RF_GAIN(39), { 0x000001c6, 0x00000179 } }, + { AR5K_RF_GAIN(40), { 0x00000006, 0x000001b9 } }, + { AR5K_RF_GAIN(41), { 0x00000046, 0x000001f9 } }, + { AR5K_RF_GAIN(42), { 0x00000086, 0x00000039 } }, + { AR5K_RF_GAIN(43), { 0x000000c6, 0x00000079 } }, + { AR5K_RF_GAIN(44), { 0x000000c6, 0x000000b9 } }, + { AR5K_RF_GAIN(45), { 0x000000c6, 0x000001bd } }, + { AR5K_RF_GAIN(46), { 0x000000c6, 0x000001fd } }, + { AR5K_RF_GAIN(47), { 0x000000c6, 0x0000003d } }, + { AR5K_RF_GAIN(48), { 0x000000c6, 0x0000007d } }, + { AR5K_RF_GAIN(49), { 0x000000c6, 0x000000bd } }, + { AR5K_RF_GAIN(50), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(51), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(52), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(53), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(54), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(55), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(56), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(57), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(58), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(59), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(60), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(61), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(62), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(63), { 0x000000c6, 0x000000fd } }, +}; + +/* Initial RF Gain settings for RF5112 */ +static const struct ath5k_ini_rfgain rfgain_5112[] = { + /* 5GHz 2GHz */ + { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } }, + { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } }, + { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } }, + { AR5K_RF_GAIN(3), { 0x000001a0, 0x000001a0 } }, + { AR5K_RF_GAIN(4), { 0x000001e0, 0x000001e0 } }, + { AR5K_RF_GAIN(5), { 0x00000020, 0x00000020 } }, + { AR5K_RF_GAIN(6), { 0x00000060, 0x00000060 } }, + { AR5K_RF_GAIN(7), { 0x000001a1, 0x000001a1 } }, + { AR5K_RF_GAIN(8), { 0x000001e1, 0x000001e1 } }, + { AR5K_RF_GAIN(9), { 0x00000021, 0x00000021 } }, + { AR5K_RF_GAIN(10), { 0x00000061, 0x00000061 } }, + { AR5K_RF_GAIN(11), { 0x00000162, 0x00000162 } }, + { AR5K_RF_GAIN(12), { 0x000001a2, 0x000001a2 } }, + { AR5K_RF_GAIN(13), { 0x000001e2, 0x000001e2 } }, + { AR5K_RF_GAIN(14), { 0x00000022, 0x00000022 } }, + { AR5K_RF_GAIN(15), { 0x00000062, 0x00000062 } }, + { AR5K_RF_GAIN(16), { 0x00000163, 0x00000163 } }, + { AR5K_RF_GAIN(17), { 0x000001a3, 0x000001a3 } }, + { AR5K_RF_GAIN(18), { 0x000001e3, 0x000001e3 } }, + { AR5K_RF_GAIN(19), { 0x00000023, 0x00000023 } }, + { AR5K_RF_GAIN(20), { 0x00000063, 0x00000063 } }, + { AR5K_RF_GAIN(21), { 0x00000184, 0x00000184 } }, + { AR5K_RF_GAIN(22), { 0x000001c4, 0x000001c4 } }, + { AR5K_RF_GAIN(23), { 0x00000004, 0x00000004 } }, + { AR5K_RF_GAIN(24), { 0x000001ea, 0x0000000b } }, + { AR5K_RF_GAIN(25), { 0x0000002a, 0x0000004b } }, + { AR5K_RF_GAIN(26), { 0x0000006a, 0x0000008b } }, + { AR5K_RF_GAIN(27), { 0x000000aa, 0x000001ac } }, + { AR5K_RF_GAIN(28), { 0x000001ab, 0x000001ec } }, + { AR5K_RF_GAIN(29), { 0x000001eb, 0x0000002c } }, + { AR5K_RF_GAIN(30), { 0x0000002b, 0x00000012 } }, + { AR5K_RF_GAIN(31), { 0x0000006b, 0x00000052 } }, + { AR5K_RF_GAIN(32), { 0x000000ab, 0x00000092 } }, + { AR5K_RF_GAIN(33), { 0x000001ac, 0x00000193 } }, + { AR5K_RF_GAIN(34), { 0x000001ec, 0x000001d3 } }, + { AR5K_RF_GAIN(35), { 0x0000002c, 0x00000013 } }, + { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000053 } }, + { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000093 } }, + { AR5K_RF_GAIN(38), { 0x000000ba, 0x00000194 } }, + { AR5K_RF_GAIN(39), { 0x000001bb, 0x000001d4 } }, + { AR5K_RF_GAIN(40), { 0x000001fb, 0x00000014 } }, + { AR5K_RF_GAIN(41), { 0x0000003b, 0x0000003a } }, + { AR5K_RF_GAIN(42), { 0x0000007b, 0x0000007a } }, + { AR5K_RF_GAIN(43), { 0x000000bb, 0x000000ba } }, + { AR5K_RF_GAIN(44), { 0x000001bc, 0x000001bb } }, + { AR5K_RF_GAIN(45), { 0x000001fc, 0x000001fb } }, + { AR5K_RF_GAIN(46), { 0x0000003c, 0x0000003b } }, + { AR5K_RF_GAIN(47), { 0x0000007c, 0x0000007b } }, + { AR5K_RF_GAIN(48), { 0x000000bc, 0x000000bb } }, + { AR5K_RF_GAIN(49), { 0x000000fc, 0x000001bc } }, + { AR5K_RF_GAIN(50), { 0x000000fc, 0x000001fc } }, + { AR5K_RF_GAIN(51), { 0x000000fc, 0x0000003c } }, + { AR5K_RF_GAIN(52), { 0x000000fc, 0x0000007c } }, + { AR5K_RF_GAIN(53), { 0x000000fc, 0x000000bc } }, + { AR5K_RF_GAIN(54), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(55), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(56), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(57), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(58), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(59), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(60), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(61), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(62), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(63), { 0x000000fc, 0x000000fc } }, +}; + +/* Initial RF Gain settings for RF2413 */ +static const struct ath5k_ini_rfgain rfgain_2413[] = { + { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000000, 0x00000181 } }, + { AR5K_RF_GAIN(4), { 0x00000000, 0x000001c1 } }, + { AR5K_RF_GAIN(5), { 0x00000000, 0x00000001 } }, + { AR5K_RF_GAIN(6), { 0x00000000, 0x00000041 } }, + { AR5K_RF_GAIN(7), { 0x00000000, 0x00000081 } }, + { AR5K_RF_GAIN(8), { 0x00000000, 0x00000168 } }, + { AR5K_RF_GAIN(9), { 0x00000000, 0x000001a8 } }, + { AR5K_RF_GAIN(10), { 0x00000000, 0x000001e8 } }, + { AR5K_RF_GAIN(11), { 0x00000000, 0x00000028 } }, + { AR5K_RF_GAIN(12), { 0x00000000, 0x00000068 } }, + { AR5K_RF_GAIN(13), { 0x00000000, 0x00000189 } }, + { AR5K_RF_GAIN(14), { 0x00000000, 0x000001c9 } }, + { AR5K_RF_GAIN(15), { 0x00000000, 0x00000009 } }, + { AR5K_RF_GAIN(16), { 0x00000000, 0x00000049 } }, + { AR5K_RF_GAIN(17), { 0x00000000, 0x00000089 } }, + { AR5K_RF_GAIN(18), { 0x00000000, 0x00000190 } }, + { AR5K_RF_GAIN(19), { 0x00000000, 0x000001d0 } }, + { AR5K_RF_GAIN(20), { 0x00000000, 0x00000010 } }, + { AR5K_RF_GAIN(21), { 0x00000000, 0x00000050 } }, + { AR5K_RF_GAIN(22), { 0x00000000, 0x00000090 } }, + { AR5K_RF_GAIN(23), { 0x00000000, 0x00000191 } }, + { AR5K_RF_GAIN(24), { 0x00000000, 0x000001d1 } }, + { AR5K_RF_GAIN(25), { 0x00000000, 0x00000011 } }, + { AR5K_RF_GAIN(26), { 0x00000000, 0x00000051 } }, + { AR5K_RF_GAIN(27), { 0x00000000, 0x00000091 } }, + { AR5K_RF_GAIN(28), { 0x00000000, 0x00000178 } }, + { AR5K_RF_GAIN(29), { 0x00000000, 0x000001b8 } }, + { AR5K_RF_GAIN(30), { 0x00000000, 0x000001f8 } }, + { AR5K_RF_GAIN(31), { 0x00000000, 0x00000038 } }, + { AR5K_RF_GAIN(32), { 0x00000000, 0x00000078 } }, + { AR5K_RF_GAIN(33), { 0x00000000, 0x00000199 } }, + { AR5K_RF_GAIN(34), { 0x00000000, 0x000001d9 } }, + { AR5K_RF_GAIN(35), { 0x00000000, 0x00000019 } }, + { AR5K_RF_GAIN(36), { 0x00000000, 0x00000059 } }, + { AR5K_RF_GAIN(37), { 0x00000000, 0x00000099 } }, + { AR5K_RF_GAIN(38), { 0x00000000, 0x000000d9 } }, + { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f9 } }, +}; + +/* Initial RF Gain settings for AR2316 */ +static const struct ath5k_ini_rfgain rfgain_2316[] = { + { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000000, 0x000000c0 } }, + { AR5K_RF_GAIN(4), { 0x00000000, 0x000000e0 } }, + { AR5K_RF_GAIN(5), { 0x00000000, 0x000000e0 } }, + { AR5K_RF_GAIN(6), { 0x00000000, 0x00000128 } }, + { AR5K_RF_GAIN(7), { 0x00000000, 0x00000128 } }, + { AR5K_RF_GAIN(8), { 0x00000000, 0x00000128 } }, + { AR5K_RF_GAIN(9), { 0x00000000, 0x00000168 } }, + { AR5K_RF_GAIN(10), { 0x00000000, 0x000001a8 } }, + { AR5K_RF_GAIN(11), { 0x00000000, 0x000001e8 } }, + { AR5K_RF_GAIN(12), { 0x00000000, 0x00000028 } }, + { AR5K_RF_GAIN(13), { 0x00000000, 0x00000068 } }, + { AR5K_RF_GAIN(14), { 0x00000000, 0x000000a8 } }, + { AR5K_RF_GAIN(15), { 0x00000000, 0x000000e8 } }, + { AR5K_RF_GAIN(16), { 0x00000000, 0x000000e8 } }, + { AR5K_RF_GAIN(17), { 0x00000000, 0x00000130 } }, + { AR5K_RF_GAIN(18), { 0x00000000, 0x00000130 } }, + { AR5K_RF_GAIN(19), { 0x00000000, 0x00000170 } }, + { AR5K_RF_GAIN(20), { 0x00000000, 0x000001b0 } }, + { AR5K_RF_GAIN(21), { 0x00000000, 0x000001f0 } }, + { AR5K_RF_GAIN(22), { 0x00000000, 0x00000030 } }, + { AR5K_RF_GAIN(23), { 0x00000000, 0x00000070 } }, + { AR5K_RF_GAIN(24), { 0x00000000, 0x000000b0 } }, + { AR5K_RF_GAIN(25), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(26), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(27), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(28), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(29), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(30), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(31), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(32), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(33), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(34), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(35), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(36), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(37), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(38), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f0 } }, +}; + + +/* Initial RF Gain settings for RF5413 */ +static const struct ath5k_ini_rfgain rfgain_5413[] = { + /* 5GHz 2GHz */ + { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x000001a1, 0x00000161 } }, + { AR5K_RF_GAIN(4), { 0x000001e1, 0x000001a1 } }, + { AR5K_RF_GAIN(5), { 0x00000021, 0x000001e1 } }, + { AR5K_RF_GAIN(6), { 0x00000061, 0x00000021 } }, + { AR5K_RF_GAIN(7), { 0x00000188, 0x00000061 } }, + { AR5K_RF_GAIN(8), { 0x000001c8, 0x00000188 } }, + { AR5K_RF_GAIN(9), { 0x00000008, 0x000001c8 } }, + { AR5K_RF_GAIN(10), { 0x00000048, 0x00000008 } }, + { AR5K_RF_GAIN(11), { 0x00000088, 0x00000048 } }, + { AR5K_RF_GAIN(12), { 0x000001a9, 0x00000088 } }, + { AR5K_RF_GAIN(13), { 0x000001e9, 0x00000169 } }, + { AR5K_RF_GAIN(14), { 0x00000029, 0x000001a9 } }, + { AR5K_RF_GAIN(15), { 0x00000069, 0x000001e9 } }, + { AR5K_RF_GAIN(16), { 0x000001d0, 0x00000029 } }, + { AR5K_RF_GAIN(17), { 0x00000010, 0x00000069 } }, + { AR5K_RF_GAIN(18), { 0x00000050, 0x00000190 } }, + { AR5K_RF_GAIN(19), { 0x00000090, 0x000001d0 } }, + { AR5K_RF_GAIN(20), { 0x000001b1, 0x00000010 } }, + { AR5K_RF_GAIN(21), { 0x000001f1, 0x00000050 } }, + { AR5K_RF_GAIN(22), { 0x00000031, 0x00000090 } }, + { AR5K_RF_GAIN(23), { 0x00000071, 0x00000171 } }, + { AR5K_RF_GAIN(24), { 0x000001b8, 0x000001b1 } }, + { AR5K_RF_GAIN(25), { 0x000001f8, 0x000001f1 } }, + { AR5K_RF_GAIN(26), { 0x00000038, 0x00000031 } }, + { AR5K_RF_GAIN(27), { 0x00000078, 0x00000071 } }, + { AR5K_RF_GAIN(28), { 0x00000199, 0x00000198 } }, + { AR5K_RF_GAIN(29), { 0x000001d9, 0x000001d8 } }, + { AR5K_RF_GAIN(30), { 0x00000019, 0x00000018 } }, + { AR5K_RF_GAIN(31), { 0x00000059, 0x00000058 } }, + { AR5K_RF_GAIN(32), { 0x00000099, 0x00000098 } }, + { AR5K_RF_GAIN(33), { 0x000000d9, 0x00000179 } }, + { AR5K_RF_GAIN(34), { 0x000000f9, 0x000001b9 } }, + { AR5K_RF_GAIN(35), { 0x000000f9, 0x000001f9 } }, + { AR5K_RF_GAIN(36), { 0x000000f9, 0x00000039 } }, + { AR5K_RF_GAIN(37), { 0x000000f9, 0x00000079 } }, + { AR5K_RF_GAIN(38), { 0x000000f9, 0x000000b9 } }, + { AR5K_RF_GAIN(39), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(40), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(41), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(42), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(43), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(44), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(45), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(46), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(47), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(48), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(49), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(50), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(51), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(52), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(53), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(54), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(55), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(56), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(57), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(58), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(59), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(60), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(61), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(62), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(63), { 0x000000f9, 0x000000f9 } }, +}; + + +/* Initial RF Gain settings for RF2425 */ +static const struct ath5k_ini_rfgain rfgain_2425[] = { + { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000000, 0x00000181 } }, + { AR5K_RF_GAIN(4), { 0x00000000, 0x000001c1 } }, + { AR5K_RF_GAIN(5), { 0x00000000, 0x00000001 } }, + { AR5K_RF_GAIN(6), { 0x00000000, 0x00000041 } }, + { AR5K_RF_GAIN(7), { 0x00000000, 0x00000081 } }, + { AR5K_RF_GAIN(8), { 0x00000000, 0x00000188 } }, + { AR5K_RF_GAIN(9), { 0x00000000, 0x000001c8 } }, + { AR5K_RF_GAIN(10), { 0x00000000, 0x00000008 } }, + { AR5K_RF_GAIN(11), { 0x00000000, 0x00000048 } }, + { AR5K_RF_GAIN(12), { 0x00000000, 0x00000088 } }, + { AR5K_RF_GAIN(13), { 0x00000000, 0x00000189 } }, + { AR5K_RF_GAIN(14), { 0x00000000, 0x000001c9 } }, + { AR5K_RF_GAIN(15), { 0x00000000, 0x00000009 } }, + { AR5K_RF_GAIN(16), { 0x00000000, 0x00000049 } }, + { AR5K_RF_GAIN(17), { 0x00000000, 0x00000089 } }, + { AR5K_RF_GAIN(18), { 0x00000000, 0x000001b0 } }, + { AR5K_RF_GAIN(19), { 0x00000000, 0x000001f0 } }, + { AR5K_RF_GAIN(20), { 0x00000000, 0x00000030 } }, + { AR5K_RF_GAIN(21), { 0x00000000, 0x00000070 } }, + { AR5K_RF_GAIN(22), { 0x00000000, 0x00000171 } }, + { AR5K_RF_GAIN(23), { 0x00000000, 0x000001b1 } }, + { AR5K_RF_GAIN(24), { 0x00000000, 0x000001f1 } }, + { AR5K_RF_GAIN(25), { 0x00000000, 0x00000031 } }, + { AR5K_RF_GAIN(26), { 0x00000000, 0x00000071 } }, + { AR5K_RF_GAIN(27), { 0x00000000, 0x000001b8 } }, + { AR5K_RF_GAIN(28), { 0x00000000, 0x000001f8 } }, + { AR5K_RF_GAIN(29), { 0x00000000, 0x00000038 } }, + { AR5K_RF_GAIN(30), { 0x00000000, 0x00000078 } }, + { AR5K_RF_GAIN(31), { 0x00000000, 0x000000b8 } }, + { AR5K_RF_GAIN(32), { 0x00000000, 0x000001b9 } }, + { AR5K_RF_GAIN(33), { 0x00000000, 0x000001f9 } }, + { AR5K_RF_GAIN(34), { 0x00000000, 0x00000039 } }, + { AR5K_RF_GAIN(35), { 0x00000000, 0x00000079 } }, + { AR5K_RF_GAIN(36), { 0x00000000, 0x000000b9 } }, + { AR5K_RF_GAIN(37), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(38), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f9 } }, +}; + +#define AR5K_GAIN_CRN_FIX_BITS_5111 4 +#define AR5K_GAIN_CRN_FIX_BITS_5112 7 +#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 +#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 +#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 +#define AR5K_GAIN_CCK_PROBE_CORR 5 +#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 +#define AR5K_GAIN_STEP_COUNT 10 + +/* Check if our current measurement is inside our + * current variable attenuation window */ +#define AR5K_GAIN_CHECK_ADJUST(_g) \ + ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) + +/** + * struct ath5k_gain_opt_step - An RF gain optimization step + * @gos_param: Set of parameters + * @gos_gain: Gain + */ +struct ath5k_gain_opt_step { + s8 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; + s8 gos_gain; +}; + +/** + * struct ath5k_gain_opt - RF Gain optimization ladder + * @go_default: The default step + * @go_steps_count: How many optimization steps + * @go_step: Array of &struct ath5k_gain_opt_step + */ +struct ath5k_gain_opt { + u8 go_default; + u8 go_steps_count; + const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT]; +}; + + +/* + * RF5111 + * Parameters on gos_param: + * 1) Tx clip PHY register + * 2) PWD 90 RF register + * 3) PWD 84 RF register + * 4) RFGainSel RF register + */ +static const struct ath5k_gain_opt rfgain_opt_5111 = { + 4, + 9, + { + { { 4, 1, 1, 1 }, 6 }, + { { 4, 0, 1, 1 }, 4 }, + { { 3, 1, 1, 1 }, 3 }, + { { 4, 0, 0, 1 }, 1 }, + { { 4, 1, 1, 0 }, 0 }, + { { 4, 0, 1, 0 }, -2 }, + { { 3, 1, 1, 0 }, -3 }, + { { 4, 0, 0, 0 }, -4 }, + { { 2, 1, 1, 0 }, -6 } + } +}; + +/* + * RF5112 + * Parameters on gos_param: + * 1) Mixgain ovr RF register + * 2) PWD 138 RF register + * 3) PWD 137 RF register + * 4) PWD 136 RF register + * 5) PWD 132 RF register + * 6) PWD 131 RF register + * 7) PWD 130 RF register + */ +static const struct ath5k_gain_opt rfgain_opt_5112 = { + 1, + 8, + { + { { 3, 0, 0, 0, 0, 0, 0 }, 6 }, + { { 2, 0, 0, 0, 0, 0, 0 }, 0 }, + { { 1, 0, 0, 0, 0, 0, 0 }, -3 }, + { { 0, 0, 0, 0, 0, 0, 0 }, -6 }, + { { 0, 1, 1, 0, 0, 0, 0 }, -8 }, + { { 0, 1, 1, 0, 1, 1, 0 }, -10 }, + { { 0, 1, 0, 1, 1, 1, 0 }, -13 }, + { { 0, 1, 0, 1, 1, 0, 1 }, -16 }, + } +}; + diff --git a/drivers/net/wireless/ath/ath5k/rfkill.c b/drivers/net/wireless/ath/ath5k/rfkill.c new file mode 100644 index 000000000..855ed7fc7 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/rfkill.c @@ -0,0 +1,115 @@ +/* + * RFKILL support for ath5k + * + * Copyright (c) 2009 Tobias Doerffel <tobias.doerffel@gmail.com> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + */ + +#include "ath5k.h" + + +static inline void ath5k_rfkill_disable(struct ath5k_hw *ah) +{ + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "rfkill disable (gpio:%d polarity:%d)\n", + ah->rf_kill.gpio, ah->rf_kill.polarity); + ath5k_hw_set_gpio_output(ah, ah->rf_kill.gpio); + ath5k_hw_set_gpio(ah, ah->rf_kill.gpio, !ah->rf_kill.polarity); +} + + +static inline void ath5k_rfkill_enable(struct ath5k_hw *ah) +{ + ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "rfkill enable (gpio:%d polarity:%d)\n", + ah->rf_kill.gpio, ah->rf_kill.polarity); + ath5k_hw_set_gpio_output(ah, ah->rf_kill.gpio); + ath5k_hw_set_gpio(ah, ah->rf_kill.gpio, ah->rf_kill.polarity); +} + +static inline void ath5k_rfkill_set_intr(struct ath5k_hw *ah, bool enable) +{ + u32 curval; + + ath5k_hw_set_gpio_input(ah, ah->rf_kill.gpio); + curval = ath5k_hw_get_gpio(ah, ah->rf_kill.gpio); + ath5k_hw_set_gpio_intr(ah, ah->rf_kill.gpio, enable ? + !!curval : !curval); +} + +static bool +ath5k_is_rfkill_set(struct ath5k_hw *ah) +{ + /* configuring GPIO for input for some reason disables rfkill */ + /*ath5k_hw_set_gpio_input(ah, ah->rf_kill.gpio);*/ + return ath5k_hw_get_gpio(ah, ah->rf_kill.gpio) == + ah->rf_kill.polarity; +} + +static void +ath5k_tasklet_rfkill_toggle(struct tasklet_struct *t) +{ + struct ath5k_hw *ah = from_tasklet(ah, t, rf_kill.toggleq); + bool blocked; + + blocked = ath5k_is_rfkill_set(ah); + wiphy_rfkill_set_hw_state(ah->hw->wiphy, blocked); +} + + +void +ath5k_rfkill_hw_start(struct ath5k_hw *ah) +{ + /* read rfkill GPIO configuration from EEPROM header */ + ah->rf_kill.gpio = ah->ah_capabilities.cap_eeprom.ee_rfkill_pin; + ah->rf_kill.polarity = ah->ah_capabilities.cap_eeprom.ee_rfkill_pol; + + tasklet_setup(&ah->rf_kill.toggleq, ath5k_tasklet_rfkill_toggle); + + ath5k_rfkill_disable(ah); + + /* enable interrupt for rfkill switch */ + if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) + ath5k_rfkill_set_intr(ah, true); +} + + +void +ath5k_rfkill_hw_stop(struct ath5k_hw *ah) +{ + /* disable interrupt for rfkill switch */ + if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) + ath5k_rfkill_set_intr(ah, false); + + tasklet_kill(&ah->rf_kill.toggleq); + + /* enable RFKILL when stopping HW so Wifi LED is turned off */ + ath5k_rfkill_enable(ah); +} + diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c new file mode 100644 index 000000000..37bf64106 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/sysfs.c @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0 +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/device.h> +#include <linux/pci.h> + +#include "ath5k.h" +#include "reg.h" + +#define SIMPLE_SHOW_STORE(name, get, set) \ +static ssize_t ath5k_attr_show_##name(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_hw *ah = hw->priv; \ + return sysfs_emit(buf, "%d\n", get); \ +} \ + \ +static ssize_t ath5k_attr_store_##name(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_hw *ah = hw->priv; \ + int val, ret; \ + \ + ret = kstrtoint(buf, 10, &val); \ + if (ret < 0) \ + return ret; \ + set(ah, val); \ + return count; \ +} \ +static DEVICE_ATTR(name, 0644, \ + ath5k_attr_show_##name, ath5k_attr_store_##name) + +#define SIMPLE_SHOW(name, get) \ +static ssize_t ath5k_attr_show_##name(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_hw *ah = hw->priv; \ + return sysfs_emit(buf, "%d\n", get); \ +} \ +static DEVICE_ATTR(name, 0444, ath5k_attr_show_##name, NULL) + +/*** ANI ***/ + +SIMPLE_SHOW_STORE(ani_mode, ah->ani_state.ani_mode, ath5k_ani_init); +SIMPLE_SHOW_STORE(noise_immunity_level, ah->ani_state.noise_imm_level, + ath5k_ani_set_noise_immunity_level); +SIMPLE_SHOW_STORE(spur_level, ah->ani_state.spur_level, + ath5k_ani_set_spur_immunity_level); +SIMPLE_SHOW_STORE(firstep_level, ah->ani_state.firstep_level, + ath5k_ani_set_firstep_level); +SIMPLE_SHOW_STORE(ofdm_weak_signal_detection, ah->ani_state.ofdm_weak_sig, + ath5k_ani_set_ofdm_weak_signal_detection); +SIMPLE_SHOW_STORE(cck_weak_signal_detection, ah->ani_state.cck_weak_sig, + ath5k_ani_set_cck_weak_signal_detection); +SIMPLE_SHOW(spur_level_max, ah->ani_state.max_spur_level); + +static ssize_t ath5k_attr_show_noise_immunity_level_max(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sysfs_emit(buf, "%d\n", ATH5K_ANI_MAX_NOISE_IMM_LVL); +} +static DEVICE_ATTR(noise_immunity_level_max, 0444, + ath5k_attr_show_noise_immunity_level_max, NULL); + +static ssize_t ath5k_attr_show_firstep_level_max(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sysfs_emit(buf, "%d\n", ATH5K_ANI_MAX_FIRSTEP_LVL); +} +static DEVICE_ATTR(firstep_level_max, 0444, + ath5k_attr_show_firstep_level_max, NULL); + +static struct attribute *ath5k_sysfs_entries_ani[] = { + &dev_attr_ani_mode.attr, + &dev_attr_noise_immunity_level.attr, + &dev_attr_spur_level.attr, + &dev_attr_firstep_level.attr, + &dev_attr_ofdm_weak_signal_detection.attr, + &dev_attr_cck_weak_signal_detection.attr, + &dev_attr_noise_immunity_level_max.attr, + &dev_attr_spur_level_max.attr, + &dev_attr_firstep_level_max.attr, + NULL +}; + +static struct attribute_group ath5k_attribute_group_ani = { + .name = "ani", + .attrs = ath5k_sysfs_entries_ani, +}; + + +/*** register / unregister ***/ + +int +ath5k_sysfs_register(struct ath5k_hw *ah) +{ + struct device *dev = ah->dev; + int err; + + err = sysfs_create_group(&dev->kobj, &ath5k_attribute_group_ani); + if (err) { + ATH5K_ERR(ah, "failed to create sysfs group\n"); + return err; + } + + return 0; +} + +void +ath5k_sysfs_unregister(struct ath5k_hw *ah) +{ + struct device *dev = ah->dev; + + sysfs_remove_group(&dev->kobj, &ath5k_attribute_group_ani); +} diff --git a/drivers/net/wireless/ath/ath5k/trace.h b/drivers/net/wireless/ath/ath5k/trace.h new file mode 100644 index 000000000..a41e3bf42 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/trace.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#if !defined(__TRACE_ATH5K_H) || defined(TRACE_HEADER_MULTI_READ) +#define __TRACE_ATH5K_H + +#include <linux/tracepoint.h> + + +#if !defined(CONFIG_ATH5K_TRACER) || defined(__CHECKER__) +#undef TRACE_EVENT +#define TRACE_EVENT(name, proto, ...) \ +static inline void trace_ ## name(proto) {} +#endif + +struct sk_buff; +struct ath5k_txq; +struct ath5k_tx_status; + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM ath5k + +TRACE_EVENT(ath5k_rx, + TP_PROTO(struct ath5k_hw *priv, struct sk_buff *skb), + TP_ARGS(priv, skb), + TP_STRUCT__entry( + __field(struct ath5k_hw *, priv) + __field(unsigned long, skbaddr) + __dynamic_array(u8, frame, skb->len) + ), + TP_fast_assign( + __entry->priv = priv; + __entry->skbaddr = (unsigned long) skb; + memcpy(__get_dynamic_array(frame), skb->data, skb->len); + ), + TP_printk( + "[%p] RX skb=%lx", __entry->priv, __entry->skbaddr + ) +); + +TRACE_EVENT(ath5k_tx, + TP_PROTO(struct ath5k_hw *priv, struct sk_buff *skb, + struct ath5k_txq *q), + + TP_ARGS(priv, skb, q), + + TP_STRUCT__entry( + __field(struct ath5k_hw *, priv) + __field(unsigned long, skbaddr) + __field(u8, qnum) + __dynamic_array(u8, frame, skb->len) + ), + + TP_fast_assign( + __entry->priv = priv; + __entry->skbaddr = (unsigned long) skb; + __entry->qnum = (u8) q->qnum; + memcpy(__get_dynamic_array(frame), skb->data, skb->len); + ), + + TP_printk( + "[%p] TX skb=%lx q=%d", __entry->priv, __entry->skbaddr, + __entry->qnum + ) +); + +TRACE_EVENT(ath5k_tx_complete, + TP_PROTO(struct ath5k_hw *priv, struct sk_buff *skb, + struct ath5k_txq *q, struct ath5k_tx_status *ts), + + TP_ARGS(priv, skb, q, ts), + + TP_STRUCT__entry( + __field(struct ath5k_hw *, priv) + __field(unsigned long, skbaddr) + __field(u8, qnum) + __field(u8, ts_status) + __field(s8, ts_rssi) + __field(u8, ts_antenna) + ), + + TP_fast_assign( + __entry->priv = priv; + __entry->skbaddr = (unsigned long) skb; + __entry->qnum = (u8) q->qnum; + __entry->ts_status = ts->ts_status; + __entry->ts_rssi = ts->ts_rssi; + __entry->ts_antenna = ts->ts_antenna; + ), + + TP_printk( + "[%p] TX end skb=%lx q=%d stat=%x rssi=%d ant=%x", + __entry->priv, __entry->skbaddr, __entry->qnum, + __entry->ts_status, __entry->ts_rssi, __entry->ts_antenna + ) +); + +#endif /* __TRACE_ATH5K_H */ + +#if defined(CONFIG_ATH5K_TRACER) && !defined(__CHECKER__) + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +#include <trace/define_trace.h> + +#endif |