diff options
Diffstat (limited to 'drivers/net/wwan/iosm/iosm_ipc_imem.h')
| -rw-r--r-- | drivers/net/wwan/iosm/iosm_ipc_imem.h | 603 |
1 files changed, 603 insertions, 0 deletions
diff --git a/drivers/net/wwan/iosm/iosm_ipc_imem.h b/drivers/net/wwan/iosm/iosm_ipc_imem.h new file mode 100644 index 000000000..e700dc8bf --- /dev/null +++ b/drivers/net/wwan/iosm/iosm_ipc_imem.h @@ -0,0 +1,603 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * Copyright (C) 2020-21 Intel Corporation. + */ + +#ifndef IOSM_IPC_IMEM_H +#define IOSM_IPC_IMEM_H + +#include <linux/skbuff.h> + +#include "iosm_ipc_mmio.h" +#include "iosm_ipc_pcie.h" +#include "iosm_ipc_uevent.h" +#include "iosm_ipc_wwan.h" +#include "iosm_ipc_task_queue.h" + +struct ipc_chnl_cfg; + +/* IRQ moderation in usec */ +#define IRQ_MOD_OFF 0 +#define IRQ_MOD_NET 1000 +#define IRQ_MOD_TRC 4000 + +/* Either the PSI image is accepted by CP or the suspended flash tool is waken, + * informed that the CP ROM driver is not ready to process the PSI image. + * unit : milliseconds + */ +#define IPC_PSI_TRANSFER_TIMEOUT 3000 + +/* Timeout in 20 msec to wait for the modem to boot up to + * IPC_MEM_DEVICE_IPC_INIT state. + * unit : milliseconds (500 * ipc_util_msleep(20)) + */ +#define IPC_MODEM_BOOT_TIMEOUT 500 + +/* Wait timeout for ipc status reflects IPC_MEM_DEVICE_IPC_UNINIT + * unit : milliseconds + */ +#define IPC_MODEM_UNINIT_TIMEOUT_MS 30 + +/* Pending time for processing data. + * unit : milliseconds + */ +#define IPC_PEND_DATA_TIMEOUT 500 + +/* The timeout in milliseconds for application to wait for remote time. */ +#define IPC_REMOTE_TS_TIMEOUT_MS 10 + +/* Timeout for TD allocation retry. + * unit : milliseconds + */ +#define IPC_TD_ALLOC_TIMER_PERIOD_MS 100 + +/* Host sleep target is host */ +#define IPC_HOST_SLEEP_HOST 0 + +/* Host sleep target is device */ +#define IPC_HOST_SLEEP_DEVICE 1 + +/* Sleep message, target host: AP enters sleep / target device: CP is + * allowed to enter sleep and shall use the host sleep protocol + */ +#define IPC_HOST_SLEEP_ENTER_SLEEP 0 + +/* Sleep_message, target host: AP exits sleep / target device: CP is + * NOT allowed to enter sleep + */ +#define IPC_HOST_SLEEP_EXIT_SLEEP 1 + +#define IMEM_IRQ_DONT_CARE (-1) + +#define IPC_MEM_MAX_CHANNELS 8 + +#define IPC_MEM_MUX_IP_SESSION_ENTRIES 8 + +#define IPC_MEM_MUX_IP_CH_IF_ID 0 + +#define TD_UPDATE_DEFAULT_TIMEOUT_USEC 1900 + +#define FORCE_UPDATE_DEFAULT_TIMEOUT_USEC 500 + +/* Sleep_message, target host: not applicable / target device: CP is + * allowed to enter sleep and shall NOT use the device sleep protocol + */ +#define IPC_HOST_SLEEP_ENTER_SLEEP_NO_PROTOCOL 2 + +/* in_band_crash_signal IPC_MEM_INBAND_CRASH_SIG + * Modem crash notification configuration. If this value is non-zero then + * FEATURE_SET message will be sent to the Modem as a result the Modem will + * signal Crash via Execution Stage register. If this value is zero then Modem + * will use out-of-band method to notify about it's Crash. + */ +#define IPC_MEM_INBAND_CRASH_SIG 1 + +/* Extra headroom to be allocated for DL SKBs to allow addition of Ethernet + * header + */ +#define IPC_MEM_DL_ETH_OFFSET 16 + +#define IPC_CB(skb) ((struct ipc_skb_cb *)((skb)->cb)) +#define IOSM_CHIP_INFO_SIZE_MAX 100 + +#define FULLY_FUNCTIONAL 0 +#define IOSM_DEVLINK_INIT 1 + +/* List of the supported UL/DL pipes. */ +enum ipc_mem_pipes { + IPC_MEM_PIPE_0 = 0, + IPC_MEM_PIPE_1, + IPC_MEM_PIPE_2, + IPC_MEM_PIPE_3, + IPC_MEM_PIPE_4, + IPC_MEM_PIPE_5, + IPC_MEM_PIPE_6, + IPC_MEM_PIPE_7, + IPC_MEM_PIPE_8, + IPC_MEM_PIPE_9, + IPC_MEM_PIPE_10, + IPC_MEM_PIPE_11, + IPC_MEM_PIPE_12, + IPC_MEM_PIPE_13, + IPC_MEM_PIPE_14, + IPC_MEM_PIPE_15, + IPC_MEM_PIPE_16, + IPC_MEM_PIPE_17, + IPC_MEM_PIPE_18, + IPC_MEM_PIPE_19, + IPC_MEM_PIPE_20, + IPC_MEM_PIPE_21, + IPC_MEM_PIPE_22, + IPC_MEM_PIPE_23, + IPC_MEM_MAX_PIPES +}; + +/* Enum defining channel states. */ +enum ipc_channel_state { + IMEM_CHANNEL_FREE, + IMEM_CHANNEL_RESERVED, + IMEM_CHANNEL_ACTIVE, + IMEM_CHANNEL_CLOSING, +}; + +/* Time Unit */ +enum ipc_time_unit { + IPC_SEC = 0, + IPC_MILLI_SEC = 1, + IPC_MICRO_SEC = 2, + IPC_NANO_SEC = 3, + IPC_PICO_SEC = 4, + IPC_FEMTO_SEC = 5, + IPC_ATTO_SEC = 6, +}; + +/** + * enum ipc_ctype - Enum defining supported channel type needed for control + * /IP traffic. + * @IPC_CTYPE_WWAN: Used for IP traffic + * @IPC_CTYPE_CTRL: Used for Control Communication + */ +enum ipc_ctype { + IPC_CTYPE_WWAN, + IPC_CTYPE_CTRL, +}; + +/* Pipe direction. */ +enum ipc_mem_pipe_dir { + IPC_MEM_DIR_UL, + IPC_MEM_DIR_DL, +}; + +/* HP update identifier. To be used as data for ipc_cp_irq_hpda_update() */ +enum ipc_hp_identifier { + IPC_HP_MR = 0, + IPC_HP_PM_TRIGGER, + IPC_HP_WAKEUP_SPEC_TMR, + IPC_HP_TD_UPD_TMR_START, + IPC_HP_TD_UPD_TMR, + IPC_HP_FAST_TD_UPD_TMR, + IPC_HP_UL_WRITE_TD, + IPC_HP_DL_PROCESS, + IPC_HP_NET_CHANNEL_INIT, + IPC_HP_CDEV_OPEN, +}; + +/** + * struct ipc_pipe - Structure for Pipe. + * @tdr_start: Ipc private protocol Transfer Descriptor Ring + * @channel: Id of the sio device, set by imem_sio_open, + * needed to pass DL char to the user terminal + * @skbr_start: Circular buffer for skbuf and the buffer + * reference in a tdr_start entry. + * @phy_tdr_start: Transfer descriptor start address + * @old_head: last head pointer reported to CP. + * @old_tail: AP read position before CP moves the read + * position to write/head. If CP has consumed the + * buffers, AP has to freed the skbuf starting at + * tdr_start[old_tail]. + * @nr_of_entries: Number of elements of skb_start and tdr_start. + * @max_nr_of_queued_entries: Maximum number of queued entries in TDR + * @accumulation_backoff: Accumulation in usec for accumulation + * backoff (0 = no acc backoff) + * @irq_moderation: timer in usec for irq_moderation + * (0=no irq moderation) + * @pipe_nr: Pipe identification number + * @irq: Interrupt vector + * @dir: Direction of data stream in pipe + * @td_tag: Unique tag of the buffer queued + * @buf_size: Buffer size (in bytes) for preallocated + * buffers (for DL pipes) + * @nr_of_queued_entries: Aueued number of entries + * @is_open: Check for open pipe status + */ +struct ipc_pipe { + struct ipc_protocol_td *tdr_start; + struct ipc_mem_channel *channel; + struct sk_buff **skbr_start; + dma_addr_t phy_tdr_start; + u32 old_head; + u32 old_tail; + u32 nr_of_entries; + u32 max_nr_of_queued_entries; + u32 accumulation_backoff; + u32 irq_moderation; + u32 pipe_nr; + u32 irq; + enum ipc_mem_pipe_dir dir; + u32 td_tag; + u32 buf_size; + u16 nr_of_queued_entries; + u8 is_open:1; +}; + +/** + * struct ipc_mem_channel - Structure for Channel. + * @channel_id: Instance of the channel list and is return to the user + * at the end of the open operation. + * @ctype: Control or netif channel. + * @index: unique index per ctype + * @ul_pipe: pipe objects + * @dl_pipe: pipe objects + * @if_id: Interface ID + * @net_err_count: Number of downlink errors returned by ipc_wwan_receive + * interface at the entry point of the IP stack. + * @state: Free, reserved or busy (in use). + * @ul_sem: Needed for the blocking write or uplink transfer. + * @ul_list: Uplink accumulator which is filled by the uplink + * char app or IP stack. The socket buffer pointer are + * added to the descriptor list in the kthread context. + */ +struct ipc_mem_channel { + int channel_id; + enum ipc_ctype ctype; + int index; + struct ipc_pipe ul_pipe; + struct ipc_pipe dl_pipe; + int if_id; + u32 net_err_count; + enum ipc_channel_state state; + struct completion ul_sem; + struct sk_buff_head ul_list; +}; + +/** + * enum ipc_phase - Different AP and CP phases. + * The enums defined after "IPC_P_ROM" and before + * "IPC_P_RUN" indicates the operating state where CP can + * respond to any requests. So while introducing new phase + * this shall be taken into consideration. + * @IPC_P_OFF: On host PC, the PCIe device link settings are known + * about the combined power on. PC is running, the driver + * is loaded and CP is in power off mode. The PCIe bus + * driver call the device power mode D3hot. In this phase + * the driver the polls the device, until the device is in + * the power on state and signals the power mode D0. + * @IPC_P_OFF_REQ: The intermediate phase between cleanup activity starts + * and ends. + * @IPC_P_CRASH: The phase indicating CP crash + * @IPC_P_CD_READY: The phase indicating CP core dump is ready + * @IPC_P_ROM: After power on, CP starts in ROM mode and the IPC ROM + * driver is waiting 150 ms for the AP active notification + * saved in the PCI link status register. + * @IPC_P_PSI: Primary signed image download phase + * @IPC_P_EBL: Extended bootloader pahse + * @IPC_P_RUN: The phase after flashing to RAM is the RUNTIME phase. + */ +enum ipc_phase { + IPC_P_OFF, + IPC_P_OFF_REQ, + IPC_P_CRASH, + IPC_P_CD_READY, + IPC_P_ROM, + IPC_P_PSI, + IPC_P_EBL, + IPC_P_RUN, +}; + +/** + * struct iosm_imem - Current state of the IPC shared memory. + * @mmio: mmio instance to access CP MMIO area / + * doorbell scratchpad. + * @ipc_protocol: IPC Protocol instance + * @ipc_task: Task for entry into ipc task queue + * @wwan: WWAN device pointer + * @mux: IP Data multiplexing state. + * @sio: IPC SIO data structure pointer + * @ipc_port: IPC PORT data structure pointer + * @pcie: IPC PCIe + * @trace: IPC trace data structure pointer + * @dev: Pointer to device structure + * @ipc_requested_state: Expected IPC state on CP. + * @channels: Channel list with UL/DL pipe pairs. + * @ipc_devlink: IPC Devlink data structure pointer + * @ipc_status: local ipc_status + * @nr_of_channels: number of configured channels + * @startup_timer: startup timer for NAND support. + * @hrtimer_period: Hr timer period + * @tdupdate_timer: Delay the TD update doorbell. + * @fast_update_timer: forced head pointer update delay timer. + * @td_alloc_timer: Timer for DL pipe TD allocation retry + * @adb_timer: Timer for finishing the ADB. + * @rom_exit_code: Mapped boot rom exit code. + * @enter_runtime: 1 means the transition to runtime phase was + * executed. + * @ul_pend_sem: Semaphore to wait/complete of UL TDs + * before closing pipe. + * @app_notify_ul_pend: Signal app if UL TD is pending + * @dl_pend_sem: Semaphore to wait/complete of DL TDs + * before closing pipe. + * @app_notify_dl_pend: Signal app if DL TD is pending + * @phase: Operating phase like runtime. + * @pci_device_id: Device ID + * @cp_version: CP version + * @device_sleep: Device sleep state + * @run_state_worker: Pointer to worker component for device + * setup operations to be called when modem + * reaches RUN state + * @ev_irq_pending: 0 means inform the IPC tasklet to + * process the irq actions. + * @flag: Flag to monitor the state of driver + * @td_update_timer_suspended: if true then td update timer suspend + * @ev_mux_net_transmit_pending:0 means inform the IPC tasklet to pass + * @reset_det_n: Reset detect flag + * @pcie_wake_n: Pcie wake flag + * @debugfs_wwan_dir: WWAN Debug FS directory entry + * @debugfs_dir: Debug FS directory for driver-specific entries + */ +struct iosm_imem { + struct iosm_mmio *mmio; + struct iosm_protocol *ipc_protocol; + struct ipc_task *ipc_task; + struct iosm_wwan *wwan; + struct iosm_mux *mux; + struct iosm_cdev *ipc_port[IPC_MEM_MAX_CHANNELS]; + struct iosm_pcie *pcie; +#ifdef CONFIG_WWAN_DEBUGFS + struct iosm_trace *trace; +#endif + struct device *dev; + enum ipc_mem_device_ipc_state ipc_requested_state; + struct ipc_mem_channel channels[IPC_MEM_MAX_CHANNELS]; + struct iosm_devlink *ipc_devlink; + u32 ipc_status; + u32 nr_of_channels; + struct hrtimer startup_timer; + ktime_t hrtimer_period; + struct hrtimer tdupdate_timer; + struct hrtimer fast_update_timer; + struct hrtimer td_alloc_timer; + struct hrtimer adb_timer; + enum rom_exit_code rom_exit_code; + u32 enter_runtime; + struct completion ul_pend_sem; + u32 app_notify_ul_pend; + struct completion dl_pend_sem; + u32 app_notify_dl_pend; + enum ipc_phase phase; + u16 pci_device_id; + int cp_version; + int device_sleep; + struct work_struct run_state_worker; + u8 ev_irq_pending[IPC_IRQ_VECTORS]; + unsigned long flag; + u8 td_update_timer_suspended:1, + ev_mux_net_transmit_pending:1, + reset_det_n:1, + pcie_wake_n:1; +#ifdef CONFIG_WWAN_DEBUGFS + struct dentry *debugfs_wwan_dir; + struct dentry *debugfs_dir; +#endif +}; + +/** + * ipc_imem_init - Initialize the shared memory region + * @pcie: Pointer to core driver data-struct + * @device_id: PCI device ID + * @mmio: Pointer to the mmio area + * @dev: Pointer to device structure + * + * Returns: Initialized imem pointer on success else NULL + */ +struct iosm_imem *ipc_imem_init(struct iosm_pcie *pcie, unsigned int device_id, + void __iomem *mmio, struct device *dev); + +/** + * ipc_imem_pm_s2idle_sleep - Set PM variables to sleep/active for + * s2idle sleep/active + * @ipc_imem: Pointer to imem data-struct + * @sleep: Set PM Variable to sleep/active + */ +void ipc_imem_pm_s2idle_sleep(struct iosm_imem *ipc_imem, bool sleep); + +/** + * ipc_imem_pm_suspend - The HAL shall ask the shared memory layer + * whether D3 is allowed. + * @ipc_imem: Pointer to imem data-struct + */ +void ipc_imem_pm_suspend(struct iosm_imem *ipc_imem); + +/** + * ipc_imem_pm_resume - The HAL shall inform the shared memory layer + * that the device is active. + * @ipc_imem: Pointer to imem data-struct + */ +void ipc_imem_pm_resume(struct iosm_imem *ipc_imem); + +/** + * ipc_imem_cleanup - Inform CP and free the shared memory resources. + * @ipc_imem: Pointer to imem data-struct + */ +void ipc_imem_cleanup(struct iosm_imem *ipc_imem); + +/** + * ipc_imem_irq_process - Shift the IRQ actions to the IPC thread. + * @ipc_imem: Pointer to imem data-struct + * @irq: Irq number + */ +void ipc_imem_irq_process(struct iosm_imem *ipc_imem, int irq); + +/** + * imem_get_device_sleep_state - Get the device sleep state value. + * @ipc_imem: Pointer to imem instance + * + * Returns: device sleep state + */ +int imem_get_device_sleep_state(struct iosm_imem *ipc_imem); + +/** + * ipc_imem_td_update_timer_suspend - Updates the TD Update Timer suspend flag. + * @ipc_imem: Pointer to imem data-struct + * @suspend: Flag to update. If TRUE then HP update doorbell is triggered to + * device without any wait. If FALSE then HP update doorbell is + * delayed until timeout. + */ +void ipc_imem_td_update_timer_suspend(struct iosm_imem *ipc_imem, bool suspend); + +/** + * ipc_imem_channel_close - Release the channel resources. + * @ipc_imem: Pointer to imem data-struct + * @channel_id: Channel ID to be cleaned up. + */ +void ipc_imem_channel_close(struct iosm_imem *ipc_imem, int channel_id); + +/** + * ipc_imem_channel_alloc - Reserves a channel + * @ipc_imem: Pointer to imem data-struct + * @index: ID to lookup from the preallocated list. + * @ctype: Channel type. + * + * Returns: Index on success and failure value on error + */ +int ipc_imem_channel_alloc(struct iosm_imem *ipc_imem, int index, + enum ipc_ctype ctype); + +/** + * ipc_imem_channel_open - Establish the pipes. + * @ipc_imem: Pointer to imem data-struct + * @channel_id: Channel ID returned during alloc. + * @db_id: Doorbell ID for trigger identifier. + * + * Returns: Pointer of ipc_mem_channel on success and NULL on failure. + */ +struct ipc_mem_channel *ipc_imem_channel_open(struct iosm_imem *ipc_imem, + int channel_id, u32 db_id); + +/** + * ipc_imem_td_update_timer_start - Starts the TD Update Timer if not running. + * @ipc_imem: Pointer to imem data-struct + */ +void ipc_imem_td_update_timer_start(struct iosm_imem *ipc_imem); + +/** + * ipc_imem_ul_write_td - Pass the channel UL list to protocol layer for TD + * preparation and sending them to the device. + * @ipc_imem: Pointer to imem data-struct + * + * Returns: TRUE of HP Doorbell trigger is pending. FALSE otherwise. + */ +bool ipc_imem_ul_write_td(struct iosm_imem *ipc_imem); + +/** + * ipc_imem_ul_send - Dequeue SKB from channel list and start with + * the uplink transfer.If HP Doorbell is pending to be + * triggered then starts the TD Update Timer. + * @ipc_imem: Pointer to imem data-struct + */ +void ipc_imem_ul_send(struct iosm_imem *ipc_imem); + +/** + * ipc_imem_channel_update - Set or modify pipe config of an existing channel + * @ipc_imem: Pointer to imem data-struct + * @id: Channel config index + * @chnl_cfg: Channel config struct + * @irq_moderation: Timer in usec for irq_moderation + */ +void ipc_imem_channel_update(struct iosm_imem *ipc_imem, int id, + struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation); + +/** + * ipc_imem_channel_free -Free an IPC channel. + * @channel: Channel to be freed + */ +void ipc_imem_channel_free(struct ipc_mem_channel *channel); + +/** + * ipc_imem_hrtimer_stop - Stop the hrtimer + * @hr_timer: Pointer to hrtimer instance + */ +void ipc_imem_hrtimer_stop(struct hrtimer *hr_timer); + +/** + * ipc_imem_pipe_cleanup - Reset volatile pipe content for all channels + * @ipc_imem: Pointer to imem data-struct + * @pipe: Pipe to cleaned up + */ +void ipc_imem_pipe_cleanup(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe); + +/** + * ipc_imem_pipe_close - Send msg to device to close pipe + * @ipc_imem: Pointer to imem data-struct + * @pipe: Pipe to be closed + */ +void ipc_imem_pipe_close(struct iosm_imem *ipc_imem, struct ipc_pipe *pipe); + +/** + * ipc_imem_phase_update - Get the CP execution state + * and map it to the AP phase. + * @ipc_imem: Pointer to imem data-struct + * + * Returns: Current ap updated phase + */ +enum ipc_phase ipc_imem_phase_update(struct iosm_imem *ipc_imem); + +/** + * ipc_imem_phase_get_string - Return the current operation + * phase as string. + * @phase: AP phase + * + * Returns: AP phase string + */ +const char *ipc_imem_phase_get_string(enum ipc_phase phase); + +/** + * ipc_imem_msg_send_feature_set - Send feature set message to modem + * @ipc_imem: Pointer to imem data-struct + * @reset_enable: 0 = out-of-band, 1 = in-band-crash notification + * @atomic_ctx: if disabled call in tasklet context + * + */ +void ipc_imem_msg_send_feature_set(struct iosm_imem *ipc_imem, + unsigned int reset_enable, bool atomic_ctx); + +/** + * ipc_imem_ipc_init_check - Send the init event to CP, wait a certain time and + * set CP to runtime with the context information + * @ipc_imem: Pointer to imem data-struct + */ +void ipc_imem_ipc_init_check(struct iosm_imem *ipc_imem); + +/** + * ipc_imem_channel_init - Initialize the channel list with UL/DL pipe pairs. + * @ipc_imem: Pointer to imem data-struct + * @ctype: Channel type + * @chnl_cfg: Channel configuration struct + * @irq_moderation: Timer in usec for irq_moderation + */ +void ipc_imem_channel_init(struct iosm_imem *ipc_imem, enum ipc_ctype ctype, + struct ipc_chnl_cfg chnl_cfg, u32 irq_moderation); + +/** + * ipc_imem_devlink_trigger_chip_info - Inform devlink that the chip + * information are available if the + * flashing to RAM interworking shall be + * executed. + * @ipc_imem: Pointer to imem structure + * + * Returns: 0 on success, -1 on failure + */ +int ipc_imem_devlink_trigger_chip_info(struct iosm_imem *ipc_imem); + +void ipc_imem_adb_timer_start(struct iosm_imem *ipc_imem); + +#endif |