diff options
Diffstat (limited to 'drivers/phy/broadcom/phy-bcm-ns-usb3.c')
| -rw-r--r-- | drivers/phy/broadcom/phy-bcm-ns-usb3.c | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c new file mode 100644 index 000000000..bbfad209c --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Broadcom Northstar USB 3.0 PHY Driver + * + * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> + * Copyright (C) 2016 Broadcom + * + * All magic values used for initialization (and related comments) were obtained + * from Broadcom's SDK: + * Copyright (c) Broadcom Corp, 2012 + */ + +#include <linux/bcma/bcma.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/iopoll.h> +#include <linux/mdio.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/slab.h> + +#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f +#define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000 +#define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040 +#define BCM_NS_USB3_PHY_PIPE_BLOCK 0x8060 + +/* Registers of PLL30 block */ +#define BCM_NS_USB3_PLL_CONTROL 0x01 +#define BCM_NS_USB3_PLLA_CONTROL0 0x0a +#define BCM_NS_USB3_PLLA_CONTROL1 0x0b + +/* Registers of TX PMD block */ +#define BCM_NS_USB3_TX_PMD_CONTROL1 0x01 + +/* Registers of PIPE block */ +#define BCM_NS_USB3_LFPS_CMP 0x02 +#define BCM_NS_USB3_LFPS_DEGLITCH 0x03 + +enum bcm_ns_family { + BCM_NS_UNKNOWN, + BCM_NS_AX, + BCM_NS_BX, +}; + +struct bcm_ns_usb3 { + struct device *dev; + enum bcm_ns_family family; + void __iomem *dmp; + struct mdio_device *mdiodev; + struct phy *phy; +}; + +static const struct of_device_id bcm_ns_usb3_id_table[] = { + { + .compatible = "brcm,ns-ax-usb3-phy", + .data = (int *)BCM_NS_AX, + }, + { + .compatible = "brcm,ns-bx-usb3-phy", + .data = (int *)BCM_NS_BX, + }, + {}, +}; + +static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, + u16 value); + +static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* USB3 PLL Block */ + err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PLL30_BLOCK); + if (err < 0) + return err; + + /* Assert Ana_Pllseq start */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000); + + /* Assert CML Divider ratio to 26 */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); + + /* Asserting PLL Reset */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000); + + /* Deaaserting PLL Reset */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + /* PLL frequency monitor enable */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000); + + /* PIPE Block */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PIPE_BLOCK); + + /* CMPMAX & CMPMINTH setting */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d); + + /* DEGLITCH MIN & MAX setting */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302); + + /* TXPMD block */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_TX_PMD_BLOCK); + + /* Enabling SSC */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); + + return 0; +} + +static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* PLL30 block */ + err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PLL30_BLOCK); + if (err < 0) + return err; + + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); + + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0); + + bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c); + + /* Enable SSC */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_TX_PMD_BLOCK); + + bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3); + + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + return 0; +} + +static int bcm_ns_usb3_phy_init(struct phy *phy) +{ + struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy); + int err; + + /* Perform USB3 system soft reset */ + writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL); + + switch (usb3->family) { + case BCM_NS_AX: + err = bcm_ns_usb3_phy_init_ns_ax(usb3); + break; + case BCM_NS_BX: + err = bcm_ns_usb3_phy_init_ns_bx(usb3); + break; + default: + WARN_ON(1); + err = -ENOTSUPP; + } + + return err; +} + +static const struct phy_ops ops = { + .init = bcm_ns_usb3_phy_init, + .owner = THIS_MODULE, +}; + +/************************************************** + * MDIO driver code + **************************************************/ + +static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, + u16 value) +{ + struct mdio_device *mdiodev = usb3->mdiodev; + + return mdiodev_write(mdiodev, reg, value); +} + +static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + const struct of_device_id *of_id; + struct phy_provider *phy_provider; + struct device_node *syscon_np; + struct bcm_ns_usb3 *usb3; + struct resource res; + int err; + + usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return -ENOMEM; + + usb3->dev = dev; + usb3->mdiodev = mdiodev; + + of_id = of_match_device(bcm_ns_usb3_id_table, dev); + if (!of_id) + return -EINVAL; + usb3->family = (enum bcm_ns_family)of_id->data; + + syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0); + err = of_address_to_resource(syscon_np, 0, &res); + of_node_put(syscon_np); + if (err) + return err; + + usb3->dmp = devm_ioremap_resource(dev, &res); + if (IS_ERR(usb3->dmp)) + return PTR_ERR(usb3->dmp); + + usb3->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(usb3->phy)) { + dev_err(dev, "Failed to create PHY\n"); + return PTR_ERR(usb3->phy); + } + + phy_set_drvdata(usb3->phy, usb3); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct mdio_driver bcm_ns_usb3_mdio_driver = { + .mdiodrv = { + .driver = { + .name = "bcm_ns_mdio_usb3", + .of_match_table = bcm_ns_usb3_id_table, + }, + }, + .probe = bcm_ns_usb3_mdio_probe, +}; + +mdio_module_driver(bcm_ns_usb3_mdio_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table); |