summaryrefslogtreecommitdiffstats
path: root/drivers/phy/ralink
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/ralink')
-rw-r--r--drivers/phy/ralink/Kconfig21
-rw-r--r--drivers/phy/ralink/Makefile3
-rw-r--r--drivers/phy/ralink/phy-mt7621-pci.c360
-rw-r--r--drivers/phy/ralink/phy-ralink-usb.c238
4 files changed, 622 insertions, 0 deletions
diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig
new file mode 100644
index 000000000..c2373b30b
--- /dev/null
+++ b/drivers/phy/ralink/Kconfig
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PHY drivers for Ralink platforms.
+#
+config PHY_MT7621_PCI
+ tristate "MediaTek MT7621 PCI PHY Driver"
+ depends on (RALINK && OF) || COMPILE_TEST
+ select GENERIC_PHY
+ select REGMAP_MMIO
+ help
+ Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver,
+
+config PHY_RALINK_USB
+ tristate "Ralink USB PHY driver"
+ depends on RALINK || COMPILE_TEST
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ This option enables support for the Ralink USB PHY found inside
+ RT3352, MT7620, MT7628 and MT7688.
diff --git a/drivers/phy/ralink/Makefile b/drivers/phy/ralink/Makefile
new file mode 100644
index 000000000..cda2a4a7c
--- /dev/null
+++ b/drivers/phy/ralink/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_MT7621_PCI) += phy-mt7621-pci.o
+obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o
diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
new file mode 100644
index 000000000..85888ab2d
--- /dev/null
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Mediatek MT7621 PCI PHY Driver
+ * Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sys_soc.h>
+
+#define RG_PE1_PIPE_REG 0x02c
+#define RG_PE1_PIPE_RST BIT(12)
+#define RG_PE1_PIPE_CMD_FRC BIT(4)
+
+#define RG_P0_TO_P1_WIDTH 0x100
+#define RG_PE1_H_LCDDS_REG 0x49c
+#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0)
+
+#define RG_PE1_FRC_H_XTAL_REG 0x400
+#define RG_PE1_FRC_H_XTAL_TYPE BIT(8)
+#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9)
+
+#define RG_PE1_FRC_PHY_REG 0x000
+#define RG_PE1_FRC_PHY_EN BIT(4)
+#define RG_PE1_PHY_EN BIT(5)
+
+#define RG_PE1_H_PLL_REG 0x490
+#define RG_PE1_H_PLL_BC GENMASK(23, 22)
+#define RG_PE1_H_PLL_BP GENMASK(21, 18)
+#define RG_PE1_H_PLL_IR GENMASK(15, 12)
+#define RG_PE1_H_PLL_IC GENMASK(11, 8)
+#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6)
+#define RG_PE1_PLL_DIVEN GENMASK(3, 1)
+
+#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc
+#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4)
+
+#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4
+#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0)
+
+#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8
+#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0)
+#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16)
+
+#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0
+#define RG_PE1_LCDDS_CLK_PH_INV BIT(5)
+
+#define RG_PE1_H_PLL_BR_REG 0x4ac
+#define RG_PE1_H_PLL_BR GENMASK(18, 16)
+
+#define RG_PE1_MSTCKDIV_REG 0x414
+#define RG_PE1_MSTCKDIV GENMASK(7, 6)
+
+#define RG_PE1_FRC_MSTCKDIV BIT(5)
+
+#define MAX_PHYS 2
+
+/**
+ * struct mt7621_pci_phy - Mt7621 Pcie PHY core
+ * @dev: pointer to device
+ * @regmap: kernel regmap pointer
+ * @phy: pointer to the kernel PHY device
+ * @sys_clk: pointer to the system XTAL clock
+ * @port_base: base register
+ * @has_dual_port: if the phy has dual ports.
+ * @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst'
+ * needs to be executed. Depends on chip revision.
+ */
+struct mt7621_pci_phy {
+ struct device *dev;
+ struct regmap *regmap;
+ struct phy *phy;
+ struct clk *sys_clk;
+ void __iomem *port_base;
+ bool has_dual_port;
+ bool bypass_pipe_rst;
+};
+
+static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy,
+ u32 reg, u32 clr, u32 set)
+{
+ u32 val;
+
+ /*
+ * We cannot use 'regmap_write_bits' here because internally
+ * 'set' is masked before is set to the value that will be
+ * written to the register. That way results in no reliable
+ * pci setup. Avoid to mask 'set' before set value to 'val'
+ * completely avoid the problem.
+ */
+ regmap_read(phy->regmap, reg, &val);
+ val &= ~clr;
+ val |= set;
+ regmap_write(phy->regmap, reg, val);
+}
+
+static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy)
+{
+ mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_RST);
+ mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_CMD_FRC);
+
+ if (phy->has_dual_port) {
+ mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
+ 0, RG_PE1_PIPE_RST);
+ mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
+ 0, RG_PE1_PIPE_CMD_FRC);
+ }
+}
+
+static int mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
+{
+ struct device *dev = phy->dev;
+ unsigned long clk_rate;
+
+ clk_rate = clk_get_rate(phy->sys_clk);
+ if (!clk_rate)
+ return -EINVAL;
+
+ /* Set PCIe Port PHY to disable SSC */
+ /* Debug Xtal Type */
+ mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG,
+ RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE,
+ RG_PE1_FRC_H_XTAL_TYPE |
+ FIELD_PREP(RG_PE1_H_XTAL_TYPE, 0x00));
+
+ /* disable port */
+ mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, RG_PE1_PHY_EN,
+ RG_PE1_FRC_PHY_EN);
+
+ if (phy->has_dual_port) {
+ mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
+ RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+ }
+
+ if (clk_rate == 40000000) { /* 40MHz Xtal */
+ /* Set Pre-divider ratio (for host mode) */
+ mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+ FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01));
+
+ dev_dbg(dev, "Xtal is 40MHz\n");
+ } else if (clk_rate == 25000000) { /* 25MHz Xal */
+ mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+ FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
+
+ /* Select feedback clock */
+ mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG,
+ RG_PE1_H_PLL_FBKSEL,
+ FIELD_PREP(RG_PE1_H_PLL_FBKSEL, 0x01));
+
+ /* DDS NCPO PCW (for host mode) */
+ mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
+ RG_PE1_H_LCDDS_SSC_PRD,
+ FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x00));
+
+ /* DDS SSC dither period control */
+ mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
+ RG_PE1_H_LCDDS_SSC_PRD,
+ FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x18d));
+
+ /* DDS SSC dither amplitude control */
+ mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG,
+ RG_PE1_H_LCDDS_SSC_DELTA |
+ RG_PE1_H_LCDDS_SSC_DELTA1,
+ FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA, 0x4a) |
+ FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA1, 0x4a));
+
+ dev_dbg(dev, "Xtal is 25MHz\n");
+ } else { /* 20MHz Xtal */
+ mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
+ FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
+
+ dev_dbg(dev, "Xtal is 20MHz\n");
+ }
+
+ /* DDS clock inversion */
+ mt7621_phy_rmw(phy, RG_PE1_LCDDS_CLK_PH_INV_REG,
+ RG_PE1_LCDDS_CLK_PH_INV, RG_PE1_LCDDS_CLK_PH_INV);
+
+ /* Set PLL bits */
+ mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
+ RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
+ RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN,
+ FIELD_PREP(RG_PE1_H_PLL_BC, 0x02) |
+ FIELD_PREP(RG_PE1_H_PLL_BP, 0x06) |
+ FIELD_PREP(RG_PE1_H_PLL_IR, 0x02) |
+ FIELD_PREP(RG_PE1_H_PLL_IC, 0x01) |
+ FIELD_PREP(RG_PE1_PLL_DIVEN, 0x02));
+
+ mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR,
+ FIELD_PREP(RG_PE1_H_PLL_BR, 0x00));
+
+ if (clk_rate == 40000000) { /* 40MHz Xtal */
+ /* set force mode enable of da_pe1_mstckdiv */
+ mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG,
+ RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV,
+ FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) |
+ RG_PE1_FRC_MSTCKDIV);
+ }
+
+ return 0;
+}
+
+static int mt7621_pci_phy_init(struct phy *phy)
+{
+ struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
+
+ if (mphy->bypass_pipe_rst)
+ mt7621_bypass_pipe_rst(mphy);
+
+ return mt7621_set_phy_for_ssc(mphy);
+}
+
+static int mt7621_pci_phy_power_on(struct phy *phy)
+{
+ struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
+
+ /* Enable PHY and disable force mode */
+ mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
+ RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
+
+ if (mphy->has_dual_port) {
+ mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
+ RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
+ }
+
+ return 0;
+}
+
+static int mt7621_pci_phy_power_off(struct phy *phy)
+{
+ struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
+
+ /* Disable PHY */
+ mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
+ RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+
+ if (mphy->has_dual_port) {
+ mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
+ RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
+ }
+
+ return 0;
+}
+
+static int mt7621_pci_phy_exit(struct phy *phy)
+{
+ return 0;
+}
+
+static const struct phy_ops mt7621_pci_phy_ops = {
+ .init = mt7621_pci_phy_init,
+ .exit = mt7621_pci_phy_exit,
+ .power_on = mt7621_pci_phy_power_on,
+ .power_off = mt7621_pci_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev);
+
+ if (WARN_ON(args->args[0] >= MAX_PHYS))
+ return ERR_PTR(-ENODEV);
+
+ mt7621_phy->has_dual_port = args->args[0];
+
+ dev_dbg(dev, "PHY for 0x%px (dual port = %d)\n",
+ mt7621_phy->port_base, mt7621_phy->has_dual_port);
+
+ return mt7621_phy->phy;
+}
+
+static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
+ { .soc_id = "mt7621", .revision = "E2" },
+ { /* sentinel */ }
+};
+
+static const struct regmap_config mt7621_pci_phy_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x700,
+};
+
+static int mt7621_pci_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct soc_device_attribute *attr;
+ struct phy_provider *provider;
+ struct mt7621_pci_phy *phy;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ attr = soc_device_match(mt7621_pci_quirks_match);
+ if (attr)
+ phy->bypass_pipe_rst = true;
+
+ phy->dev = dev;
+ platform_set_drvdata(pdev, phy);
+
+ phy->port_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->port_base)) {
+ dev_err(dev, "failed to remap phy regs\n");
+ return PTR_ERR(phy->port_base);
+ }
+
+ phy->regmap = devm_regmap_init_mmio(phy->dev, phy->port_base,
+ &mt7621_pci_phy_regmap_config);
+ if (IS_ERR(phy->regmap))
+ return PTR_ERR(phy->regmap);
+
+ phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops);
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "failed to create phy\n");
+ return PTR_ERR(phy->phy);
+ }
+
+ phy->sys_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(phy->sys_clk)) {
+ dev_err(dev, "failed to get phy clock\n");
+ return PTR_ERR(phy->sys_clk);
+ }
+
+ phy_set_drvdata(phy->phy, phy);
+
+ provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id mt7621_pci_phy_ids[] = {
+ { .compatible = "mediatek,mt7621-pci-phy" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt7621_pci_phy_ids);
+
+static struct platform_driver mt7621_pci_phy_driver = {
+ .probe = mt7621_pci_phy_probe,
+ .driver = {
+ .name = "mt7621-pci-phy",
+ .of_match_table = mt7621_pci_phy_ids,
+ },
+};
+
+builtin_platform_driver(mt7621_pci_phy_driver);
+
+MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>");
+MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c
new file mode 100644
index 000000000..2bd8ad2e7
--- /dev/null
+++ b/drivers/phy/ralink/phy-ralink-usb.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2017 John Crispin <john@phrozen.org>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define RT_SYSC_REG_SYSCFG1 0x014
+#define RT_SYSC_REG_CLKCFG1 0x030
+#define RT_SYSC_REG_USB_PHY_CFG 0x05c
+
+#define OFS_U2_PHY_AC0 0x800
+#define OFS_U2_PHY_AC1 0x804
+#define OFS_U2_PHY_AC2 0x808
+#define OFS_U2_PHY_ACR0 0x810
+#define OFS_U2_PHY_ACR1 0x814
+#define OFS_U2_PHY_ACR2 0x818
+#define OFS_U2_PHY_ACR3 0x81C
+#define OFS_U2_PHY_ACR4 0x820
+#define OFS_U2_PHY_AMON0 0x824
+#define OFS_U2_PHY_DCR0 0x860
+#define OFS_U2_PHY_DCR1 0x864
+#define OFS_U2_PHY_DTM0 0x868
+#define OFS_U2_PHY_DTM1 0x86C
+
+#define RT_RSTCTRL_UDEV BIT(25)
+#define RT_RSTCTRL_UHST BIT(22)
+#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
+
+#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
+#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
+#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
+#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
+
+#define USB_PHY_UTMI_8B60M BIT(1)
+#define UDEV_WAKEUP BIT(0)
+
+struct ralink_usb_phy {
+ struct reset_control *rstdev;
+ struct reset_control *rsthost;
+ u32 clk;
+ struct phy *phy;
+ void __iomem *base;
+ struct regmap *sysctl;
+};
+
+static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
+{
+ writel(val, phy->base + reg);
+}
+
+static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
+{
+ return readl(phy->base + reg);
+}
+
+static void ralink_usb_phy_init(struct ralink_usb_phy *phy)
+{
+ u2_phy_r32(phy, OFS_U2_PHY_AC2);
+ u2_phy_r32(phy, OFS_U2_PHY_ACR0);
+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+
+ u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+ u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+ u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+ u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+ u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
+ u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
+ u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
+ u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
+}
+
+static int ralink_usb_phy_power_on(struct phy *_phy)
+{
+ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
+ u32 t;
+
+ /* enable the phy */
+ regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
+ phy->clk, phy->clk);
+
+ /* setup host mode */
+ regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
+ RT_SYSCFG1_USB0_HOST_MODE,
+ RT_SYSCFG1_USB0_HOST_MODE);
+
+ /* deassert the reset lines */
+ reset_control_deassert(phy->rsthost);
+ reset_control_deassert(phy->rstdev);
+
+ /*
+ * The SDK kernel had a delay of 100ms. however on device
+ * testing showed that 10ms is enough
+ */
+ mdelay(10);
+
+ if (phy->base)
+ ralink_usb_phy_init(phy);
+
+ /* print some status info */
+ regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
+ dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
+ (t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
+ if (t & USB_PHY_UTMI_8B60M)
+ dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
+ else
+ dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
+
+ return 0;
+}
+
+static int ralink_usb_phy_power_off(struct phy *_phy)
+{
+ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
+
+ /* disable the phy */
+ regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
+ phy->clk, 0);
+
+ /* assert the reset lines */
+ reset_control_assert(phy->rstdev);
+ reset_control_assert(phy->rsthost);
+
+ return 0;
+}
+
+static const struct phy_ops ralink_usb_phy_ops = {
+ .power_on = ralink_usb_phy_power_on,
+ .power_off = ralink_usb_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id ralink_usb_phy_of_match[] = {
+ {
+ .compatible = "ralink,rt3352-usbphy",
+ .data = (void *)(uintptr_t)(RT_CLKCFG1_UPHY1_CLK_EN |
+ RT_CLKCFG1_UPHY0_CLK_EN)
+ },
+ {
+ .compatible = "mediatek,mt7620-usbphy",
+ .data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
+ MT7620_CLKCFG1_UPHY0_CLK_EN)
+ },
+ {
+ .compatible = "mediatek,mt7628-usbphy",
+ .data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN |
+ MT7620_CLKCFG1_UPHY0_CLK_EN) },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
+
+static int ralink_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ const struct of_device_id *match;
+ struct ralink_usb_phy *phy;
+
+ match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->clk = (uintptr_t)match->data;
+ phy->base = NULL;
+
+ phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl");
+ if (IS_ERR(phy->sysctl)) {
+ dev_err(dev, "failed to get sysctl registers\n");
+ return PTR_ERR(phy->sysctl);
+ }
+
+ /* The MT7628 and MT7688 require extra setup of PHY registers. */
+ if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) {
+ phy->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->base)) {
+ dev_err(dev, "failed to remap register memory\n");
+ return PTR_ERR(phy->base);
+ }
+ }
+
+ phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
+ if (IS_ERR(phy->rsthost)) {
+ dev_err(dev, "host reset is missing\n");
+ return PTR_ERR(phy->rsthost);
+ }
+
+ phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
+ if (IS_ERR(phy->rstdev)) {
+ dev_err(dev, "device reset is missing\n");
+ return PTR_ERR(phy->rstdev);
+ }
+
+ phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy->phy);
+ }
+ phy_set_drvdata(phy->phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver ralink_usb_phy_driver = {
+ .probe = ralink_usb_phy_probe,
+ .driver = {
+ .of_match_table = ralink_usb_phy_of_match,
+ .name = "ralink-usb-phy",
+ }
+};
+module_platform_driver(ralink_usb_phy_driver);
+
+MODULE_DESCRIPTION("Ralink USB phy driver");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");