diff options
Diffstat (limited to 'drivers/power/supply/sc2731_charger.c')
| -rw-r--r-- | drivers/power/supply/sc2731_charger.c | 541 |
1 files changed, 541 insertions, 0 deletions
diff --git a/drivers/power/supply/sc2731_charger.c b/drivers/power/supply/sc2731_charger.c new file mode 100644 index 000000000..9ac17cf7a --- /dev/null +++ b/drivers/power/supply/sc2731_charger.c @@ -0,0 +1,541 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 Spreadtrum Communications Inc. + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/usb/phy.h> +#include <linux/regmap.h> +#include <linux/notifier.h> +#include <linux/of.h> + +/* PMIC global registers definition */ +#define SC2731_CHARGE_STATUS 0xedc +#define SC2731_CHARGE_FULL BIT(4) +#define SC2731_MODULE_EN1 0xc0c +#define SC2731_CHARGE_EN BIT(5) + +/* SC2731 switch charger registers definition */ +#define SC2731_CHG_CFG0 0x0 +#define SC2731_CHG_CFG1 0x4 +#define SC2731_CHG_CFG2 0x8 +#define SC2731_CHG_CFG3 0xc +#define SC2731_CHG_CFG4 0x10 +#define SC2731_CHG_CFG5 0x28 + +/* SC2731_CHG_CFG0 register definition */ +#define SC2731_PRECHG_RNG_SHIFT 11 +#define SC2731_PRECHG_RNG_MASK GENMASK(12, 11) + +#define SC2731_TERMINATION_VOL_MASK GENMASK(2, 1) +#define SC2731_TERMINATION_VOL_SHIFT 1 +#define SC2731_TERMINATION_VOL_CAL_MASK GENMASK(8, 3) +#define SC2731_TERMINATION_VOL_CAL_SHIFT 3 +#define SC2731_TERMINATION_CUR_MASK GENMASK(2, 0) + +#define SC2731_CC_EN BIT(13) +#define SC2731_CHARGER_PD BIT(0) + +/* SC2731_CHG_CFG1 register definition */ +#define SC2731_CUR_MASK GENMASK(5, 0) + +/* SC2731_CHG_CFG5 register definition */ +#define SC2731_CUR_LIMIT_SHIFT 8 +#define SC2731_CUR_LIMIT_MASK GENMASK(9, 8) + +/* Default current definition (unit is mA) */ +#define SC2731_CURRENT_LIMIT_100 100 +#define SC2731_CURRENT_LIMIT_500 500 +#define SC2731_CURRENT_LIMIT_900 900 +#define SC2731_CURRENT_LIMIT_2000 2000 +#define SC2731_CURRENT_PRECHG 450 +#define SC2731_CURRENT_STEP 50 + +struct sc2731_charger_info { + struct device *dev; + struct regmap *regmap; + struct usb_phy *usb_phy; + struct notifier_block usb_notify; + struct power_supply *psy_usb; + struct work_struct work; + struct mutex lock; + bool charging; + u32 base; + u32 limit; +}; + +static void sc2731_charger_stop_charge(struct sc2731_charger_info *info) +{ + regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CC_EN, 0); + + regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CHARGER_PD, SC2731_CHARGER_PD); +} + +static int sc2731_charger_start_charge(struct sc2731_charger_info *info) +{ + int ret; + + /* Enable charger constant current mode */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CC_EN, SC2731_CC_EN); + if (ret) + return ret; + + /* Start charging */ + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CHARGER_PD, 0); +} + +static int sc2731_charger_set_current_limit(struct sc2731_charger_info *info, + u32 limit) +{ + u32 val; + + if (limit <= SC2731_CURRENT_LIMIT_100) + val = 0; + else if (limit <= SC2731_CURRENT_LIMIT_500) + val = 3; + else if (limit <= SC2731_CURRENT_LIMIT_900) + val = 2; + else + val = 1; + + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG5, + SC2731_CUR_LIMIT_MASK, + val << SC2731_CUR_LIMIT_SHIFT); +} + +static int sc2731_charger_set_current(struct sc2731_charger_info *info, u32 cur) +{ + u32 val; + int ret; + + if (cur > SC2731_CURRENT_LIMIT_2000) + cur = SC2731_CURRENT_LIMIT_2000; + else if (cur < SC2731_CURRENT_PRECHG) + cur = SC2731_CURRENT_PRECHG; + + /* Calculate the step value, each step is 50 mA */ + val = (cur - SC2731_CURRENT_PRECHG) / SC2731_CURRENT_STEP; + + /* Set pre-charge current as 450 mA */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_PRECHG_RNG_MASK, + 0x3 << SC2731_PRECHG_RNG_SHIFT); + if (ret) + return ret; + + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG1, + SC2731_CUR_MASK, val); +} + +static int sc2731_charger_get_status(struct sc2731_charger_info *info) +{ + u32 val; + int ret; + + ret = regmap_read(info->regmap, SC2731_CHARGE_STATUS, &val); + if (ret) + return ret; + + if (val & SC2731_CHARGE_FULL) + return POWER_SUPPLY_STATUS_FULL; + + return POWER_SUPPLY_STATUS_CHARGING; +} + +static int sc2731_charger_get_current(struct sc2731_charger_info *info, + u32 *cur) +{ + int ret; + u32 val; + + ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG1, &val); + if (ret) + return ret; + + val &= SC2731_CUR_MASK; + *cur = val * SC2731_CURRENT_STEP + SC2731_CURRENT_PRECHG; + + return 0; +} + +static int sc2731_charger_get_current_limit(struct sc2731_charger_info *info, + u32 *cur) +{ + int ret; + u32 val; + + ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG5, &val); + if (ret) + return ret; + + val = (val & SC2731_CUR_LIMIT_MASK) >> SC2731_CUR_LIMIT_SHIFT; + + switch (val) { + case 0: + *cur = SC2731_CURRENT_LIMIT_100; + break; + + case 1: + *cur = SC2731_CURRENT_LIMIT_2000; + break; + + case 2: + *cur = SC2731_CURRENT_LIMIT_900; + break; + + case 3: + *cur = SC2731_CURRENT_LIMIT_500; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int +sc2731_charger_usb_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct sc2731_charger_info *info = power_supply_get_drvdata(psy); + int ret; + + mutex_lock(&info->lock); + + if (!info->charging) { + mutex_unlock(&info->lock); + return -ENODEV; + } + + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = sc2731_charger_set_current(info, val->intval / 1000); + if (ret < 0) + dev_err(info->dev, "set charge current failed\n"); + break; + + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = sc2731_charger_set_current_limit(info, + val->intval / 1000); + if (ret < 0) + dev_err(info->dev, "set input current limit failed\n"); + break; + + default: + ret = -EINVAL; + } + + mutex_unlock(&info->lock); + return ret; +} + +static int sc2731_charger_usb_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct sc2731_charger_info *info = power_supply_get_drvdata(psy); + int ret = 0; + u32 cur; + + mutex_lock(&info->lock); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (info->charging) + val->intval = sc2731_charger_get_status(info); + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + if (!info->charging) { + val->intval = 0; + } else { + ret = sc2731_charger_get_current(info, &cur); + if (ret) + goto out; + + val->intval = cur * 1000; + } + break; + + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + if (!info->charging) { + val->intval = 0; + } else { + ret = sc2731_charger_get_current_limit(info, &cur); + if (ret) + goto out; + + val->intval = cur * 1000; + } + break; + + default: + ret = -EINVAL; + } + +out: + mutex_unlock(&info->lock); + return ret; +} + +static int sc2731_charger_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = 1; + break; + + default: + ret = 0; + } + + return ret; +} + +static enum power_supply_property sc2731_usb_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, +}; + +static const struct power_supply_desc sc2731_charger_desc = { + .name = "sc2731_charger", + .type = POWER_SUPPLY_TYPE_USB, + .properties = sc2731_usb_props, + .num_properties = ARRAY_SIZE(sc2731_usb_props), + .get_property = sc2731_charger_usb_get_property, + .set_property = sc2731_charger_usb_set_property, + .property_is_writeable = sc2731_charger_property_is_writeable, +}; + +static void sc2731_charger_work(struct work_struct *data) +{ + struct sc2731_charger_info *info = + container_of(data, struct sc2731_charger_info, work); + int ret; + + mutex_lock(&info->lock); + + if (info->limit > 0 && !info->charging) { + /* set current limitation and start to charge */ + ret = sc2731_charger_set_current_limit(info, info->limit); + if (ret) + goto out; + + ret = sc2731_charger_set_current(info, info->limit); + if (ret) + goto out; + + ret = sc2731_charger_start_charge(info); + if (ret) + goto out; + + info->charging = true; + } else if (!info->limit && info->charging) { + /* Stop charging */ + info->charging = false; + sc2731_charger_stop_charge(info); + } + +out: + mutex_unlock(&info->lock); +} + +static int sc2731_charger_usb_change(struct notifier_block *nb, + unsigned long limit, void *data) +{ + struct sc2731_charger_info *info = + container_of(nb, struct sc2731_charger_info, usb_notify); + + info->limit = limit; + + schedule_work(&info->work); + + return NOTIFY_OK; +} + +static int sc2731_charger_hw_init(struct sc2731_charger_info *info) +{ + struct power_supply_battery_info *bat_info; + u32 term_currrent, term_voltage, cur_val, vol_val; + int ret; + + /* Enable charger module */ + ret = regmap_update_bits(info->regmap, SC2731_MODULE_EN1, + SC2731_CHARGE_EN, SC2731_CHARGE_EN); + if (ret) + return ret; + + ret = power_supply_get_battery_info(info->psy_usb, &bat_info); + if (ret) { + dev_warn(info->dev, "no battery information is supplied\n"); + + /* + * If no battery information is supplied, we should set + * default charge termination current to 120 mA, and default + * charge termination voltage to 4.35V. + */ + cur_val = 0x2; + vol_val = 0x1; + } else { + term_currrent = bat_info->charge_term_current_ua / 1000; + + if (term_currrent <= 90) + cur_val = 0; + else if (term_currrent >= 265) + cur_val = 0x7; + else + cur_val = ((term_currrent - 90) / 25) + 1; + + term_voltage = bat_info->constant_charge_voltage_max_uv / 1000; + + if (term_voltage > 4500) + term_voltage = 4500; + + if (term_voltage > 4200) + vol_val = (term_voltage - 4200) / 100; + else + vol_val = 0; + + power_supply_put_battery_info(info->psy_usb, bat_info); + } + + /* Set charge termination current */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG2, + SC2731_TERMINATION_CUR_MASK, cur_val); + if (ret) + goto error; + + /* Set charge termination voltage */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_TERMINATION_VOL_MASK | + SC2731_TERMINATION_VOL_CAL_MASK, + (vol_val << SC2731_TERMINATION_VOL_SHIFT) | + (0x6 << SC2731_TERMINATION_VOL_CAL_SHIFT)); + if (ret) + goto error; + + return 0; + +error: + regmap_update_bits(info->regmap, SC2731_MODULE_EN1, SC2731_CHARGE_EN, 0); + return ret; +} + +static void sc2731_charger_detect_status(struct sc2731_charger_info *info) +{ + unsigned int min, max; + + /* + * If the USB charger status has been USB_CHARGER_PRESENT before + * registering the notifier, we should start to charge with getting + * the charge current. + */ + if (info->usb_phy->chg_state != USB_CHARGER_PRESENT) + return; + + usb_phy_get_charger_current(info->usb_phy, &min, &max); + info->limit = min; + + schedule_work(&info->work); +} + +static int sc2731_charger_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sc2731_charger_info *info; + struct power_supply_config charger_cfg = { }; + int ret; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + mutex_init(&info->lock); + info->dev = &pdev->dev; + INIT_WORK(&info->work, sc2731_charger_work); + + info->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!info->regmap) { + dev_err(&pdev->dev, "failed to get charger regmap\n"); + return -ENODEV; + } + + ret = of_property_read_u32(np, "reg", &info->base); + if (ret) { + dev_err(&pdev->dev, "failed to get register address\n"); + return -ENODEV; + } + + charger_cfg.drv_data = info; + charger_cfg.of_node = np; + info->psy_usb = devm_power_supply_register(&pdev->dev, + &sc2731_charger_desc, + &charger_cfg); + if (IS_ERR(info->psy_usb)) { + dev_err(&pdev->dev, "failed to register power supply\n"); + return PTR_ERR(info->psy_usb); + } + + ret = sc2731_charger_hw_init(info); + if (ret) + return ret; + + info->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0); + if (IS_ERR(info->usb_phy)) { + dev_err(&pdev->dev, "failed to find USB phy\n"); + return PTR_ERR(info->usb_phy); + } + + info->usb_notify.notifier_call = sc2731_charger_usb_change; + ret = usb_register_notifier(info->usb_phy, &info->usb_notify); + if (ret) { + dev_err(&pdev->dev, "failed to register notifier: %d\n", ret); + return ret; + } + + sc2731_charger_detect_status(info); + + return 0; +} + +static int sc2731_charger_remove(struct platform_device *pdev) +{ + struct sc2731_charger_info *info = platform_get_drvdata(pdev); + + usb_unregister_notifier(info->usb_phy, &info->usb_notify); + + return 0; +} + +static const struct of_device_id sc2731_charger_of_match[] = { + { .compatible = "sprd,sc2731-charger", }, + { } +}; +MODULE_DEVICE_TABLE(of, sc2731_charger_of_match); + +static struct platform_driver sc2731_charger_driver = { + .driver = { + .name = "sc2731-charger", + .of_match_table = sc2731_charger_of_match, + }, + .probe = sc2731_charger_probe, + .remove = sc2731_charger_remove, +}; + +module_platform_driver(sc2731_charger_driver); + +MODULE_DESCRIPTION("Spreadtrum SC2731 Charger Driver"); +MODULE_LICENSE("GPL v2"); |