summaryrefslogtreecommitdiffstats
path: root/drivers/pwm/pwm-imx27.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pwm/pwm-imx27.c')
-rw-r--r--drivers/pwm/pwm-imx27.c358
1 files changed, 358 insertions, 0 deletions
diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c
new file mode 100644
index 000000000..3a22c2fdd
--- /dev/null
+++ b/drivers/pwm/pwm-imx27.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ *
+ * Limitations:
+ * - When disabled the output is driven to 0 independent of the configured
+ * polarity.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define MX3_PWMCR 0x00 /* PWM Control Register */
+#define MX3_PWMSR 0x04 /* PWM Status Register */
+#define MX3_PWMSAR 0x0C /* PWM Sample Register */
+#define MX3_PWMPR 0x10 /* PWM Period Register */
+
+#define MX3_PWMCR_FWM GENMASK(27, 26)
+#define MX3_PWMCR_STOPEN BIT(25)
+#define MX3_PWMCR_DOZEN BIT(24)
+#define MX3_PWMCR_WAITEN BIT(23)
+#define MX3_PWMCR_DBGEN BIT(22)
+#define MX3_PWMCR_BCTR BIT(21)
+#define MX3_PWMCR_HCTR BIT(20)
+
+#define MX3_PWMCR_POUTC GENMASK(19, 18)
+#define MX3_PWMCR_POUTC_NORMAL 0
+#define MX3_PWMCR_POUTC_INVERTED 1
+#define MX3_PWMCR_POUTC_OFF 2
+
+#define MX3_PWMCR_CLKSRC GENMASK(17, 16)
+#define MX3_PWMCR_CLKSRC_OFF 0
+#define MX3_PWMCR_CLKSRC_IPG 1
+#define MX3_PWMCR_CLKSRC_IPG_HIGH 2
+#define MX3_PWMCR_CLKSRC_IPG_32K 3
+
+#define MX3_PWMCR_PRESCALER GENMASK(15, 4)
+
+#define MX3_PWMCR_SWR BIT(3)
+
+#define MX3_PWMCR_REPEAT GENMASK(2, 1)
+#define MX3_PWMCR_REPEAT_1X 0
+#define MX3_PWMCR_REPEAT_2X 1
+#define MX3_PWMCR_REPEAT_4X 2
+#define MX3_PWMCR_REPEAT_8X 3
+
+#define MX3_PWMCR_EN BIT(0)
+
+#define MX3_PWMSR_FWE BIT(6)
+#define MX3_PWMSR_CMP BIT(5)
+#define MX3_PWMSR_ROV BIT(4)
+#define MX3_PWMSR_FE BIT(3)
+
+#define MX3_PWMSR_FIFOAV GENMASK(2, 0)
+#define MX3_PWMSR_FIFOAV_EMPTY 0
+#define MX3_PWMSR_FIFOAV_1WORD 1
+#define MX3_PWMSR_FIFOAV_2WORDS 2
+#define MX3_PWMSR_FIFOAV_3WORDS 3
+#define MX3_PWMSR_FIFOAV_4WORDS 4
+
+#define MX3_PWMCR_PRESCALER_SET(x) FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
+#define MX3_PWMCR_PRESCALER_GET(x) (FIELD_GET(MX3_PWMCR_PRESCALER, \
+ (x)) + 1)
+
+#define MX3_PWM_SWR_LOOP 5
+
+/* PWMPR register value of 0xffff has the same effect as 0xfffe */
+#define MX3_PWMPR_MAX 0xfffe
+
+struct pwm_imx27_chip {
+ struct clk *clk_ipg;
+ struct clk *clk_per;
+ void __iomem *mmio_base;
+ struct pwm_chip chip;
+
+ /*
+ * The driver cannot read the current duty cycle from the hardware if
+ * the hardware is disabled. Cache the last programmed duty cycle
+ * value to return in that case.
+ */
+ unsigned int duty_cycle;
+};
+
+#define to_pwm_imx27_chip(chip) container_of(chip, struct pwm_imx27_chip, chip)
+
+static int pwm_imx27_clk_prepare_enable(struct pwm_imx27_chip *imx)
+{
+ int ret;
+
+ ret = clk_prepare_enable(imx->clk_ipg);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(imx->clk_per);
+ if (ret) {
+ clk_disable_unprepare(imx->clk_ipg);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void pwm_imx27_clk_disable_unprepare(struct pwm_imx27_chip *imx)
+{
+ clk_disable_unprepare(imx->clk_per);
+ clk_disable_unprepare(imx->clk_ipg);
+}
+
+static int pwm_imx27_get_state(struct pwm_chip *chip,
+ struct pwm_device *pwm, struct pwm_state *state)
+{
+ struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
+ u32 period, prescaler, pwm_clk, val;
+ u64 tmp;
+ int ret;
+
+ ret = pwm_imx27_clk_prepare_enable(imx);
+ if (ret < 0)
+ return 0;
+
+ val = readl(imx->mmio_base + MX3_PWMCR);
+
+ if (val & MX3_PWMCR_EN)
+ state->enabled = true;
+ else
+ state->enabled = false;
+
+ switch (FIELD_GET(MX3_PWMCR_POUTC, val)) {
+ case MX3_PWMCR_POUTC_NORMAL:
+ state->polarity = PWM_POLARITY_NORMAL;
+ break;
+ case MX3_PWMCR_POUTC_INVERTED:
+ state->polarity = PWM_POLARITY_INVERSED;
+ break;
+ default:
+ dev_warn(chip->dev, "can't set polarity, output disconnected");
+ }
+
+ prescaler = MX3_PWMCR_PRESCALER_GET(val);
+ pwm_clk = clk_get_rate(imx->clk_per);
+ val = readl(imx->mmio_base + MX3_PWMPR);
+ period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;
+
+ /* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
+ tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler;
+ state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk);
+
+ /*
+ * PWMSAR can be read only if PWM is enabled. If the PWM is disabled,
+ * use the cached value.
+ */
+ if (state->enabled)
+ val = readl(imx->mmio_base + MX3_PWMSAR);
+ else
+ val = imx->duty_cycle;
+
+ tmp = NSEC_PER_SEC * (u64)(val) * prescaler;
+ state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk);
+
+ pwm_imx27_clk_disable_unprepare(imx);
+
+ return 0;
+}
+
+static void pwm_imx27_sw_reset(struct pwm_chip *chip)
+{
+ struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
+ struct device *dev = chip->dev;
+ int wait_count = 0;
+ u32 cr;
+
+ writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
+ do {
+ usleep_range(200, 1000);
+ cr = readl(imx->mmio_base + MX3_PWMCR);
+ } while ((cr & MX3_PWMCR_SWR) &&
+ (wait_count++ < MX3_PWM_SWR_LOOP));
+
+ if (cr & MX3_PWMCR_SWR)
+ dev_warn(dev, "software reset timeout\n");
+}
+
+static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
+ struct pwm_device *pwm)
+{
+ struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
+ struct device *dev = chip->dev;
+ unsigned int period_ms;
+ int fifoav;
+ u32 sr;
+
+ sr = readl(imx->mmio_base + MX3_PWMSR);
+ fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
+ if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
+ period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm),
+ NSEC_PER_MSEC);
+ msleep(period_ms);
+
+ sr = readl(imx->mmio_base + MX3_PWMSR);
+ if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
+ dev_warn(dev, "there is no free FIFO slot\n");
+ }
+}
+
+static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ unsigned long period_cycles, duty_cycles, prescale;
+ struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
+ struct pwm_state cstate;
+ unsigned long long c;
+ unsigned long long clkrate;
+ int ret;
+ u32 cr;
+
+ pwm_get_state(pwm, &cstate);
+
+ clkrate = clk_get_rate(imx->clk_per);
+ c = clkrate * state->period;
+
+ do_div(c, NSEC_PER_SEC);
+ period_cycles = c;
+
+ prescale = period_cycles / 0x10000 + 1;
+
+ period_cycles /= prescale;
+ c = clkrate * state->duty_cycle;
+ do_div(c, NSEC_PER_SEC);
+ duty_cycles = c;
+ duty_cycles /= prescale;
+
+ /*
+ * according to imx pwm RM, the real period value should be PERIOD
+ * value in PWMPR plus 2.
+ */
+ if (period_cycles > 2)
+ period_cycles -= 2;
+ else
+ period_cycles = 0;
+
+ /*
+ * Wait for a free FIFO slot if the PWM is already enabled, and flush
+ * the FIFO if the PWM was disabled and is about to be enabled.
+ */
+ if (cstate.enabled) {
+ pwm_imx27_wait_fifo_slot(chip, pwm);
+ } else {
+ ret = pwm_imx27_clk_prepare_enable(imx);
+ if (ret)
+ return ret;
+
+ pwm_imx27_sw_reset(chip);
+ }
+
+ writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
+ writel(period_cycles, imx->mmio_base + MX3_PWMPR);
+
+ /*
+ * Store the duty cycle for future reference in cases where the
+ * MX3_PWMSAR register can't be read (i.e. when the PWM is disabled).
+ */
+ imx->duty_cycle = duty_cycles;
+
+ cr = MX3_PWMCR_PRESCALER_SET(prescale) |
+ MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN |
+ FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) |
+ MX3_PWMCR_DBGEN;
+
+ if (state->polarity == PWM_POLARITY_INVERSED)
+ cr |= FIELD_PREP(MX3_PWMCR_POUTC,
+ MX3_PWMCR_POUTC_INVERTED);
+
+ if (state->enabled)
+ cr |= MX3_PWMCR_EN;
+
+ writel(cr, imx->mmio_base + MX3_PWMCR);
+
+ if (!state->enabled)
+ pwm_imx27_clk_disable_unprepare(imx);
+
+ return 0;
+}
+
+static const struct pwm_ops pwm_imx27_ops = {
+ .apply = pwm_imx27_apply,
+ .get_state = pwm_imx27_get_state,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id pwm_imx27_dt_ids[] = {
+ { .compatible = "fsl,imx27-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);
+
+static int pwm_imx27_probe(struct platform_device *pdev)
+{
+ struct pwm_imx27_chip *imx;
+ int ret;
+ u32 pwmcr;
+
+ imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
+ if (imx == NULL)
+ return -ENOMEM;
+
+ imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(imx->clk_ipg))
+ return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
+ "getting ipg clock failed\n");
+
+ imx->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(imx->clk_per))
+ return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
+ "failed to get peripheral clock\n");
+
+ imx->chip.ops = &pwm_imx27_ops;
+ imx->chip.dev = &pdev->dev;
+ imx->chip.npwm = 1;
+
+ imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(imx->mmio_base))
+ return PTR_ERR(imx->mmio_base);
+
+ ret = pwm_imx27_clk_prepare_enable(imx);
+ if (ret)
+ return ret;
+
+ /* keep clks on if pwm is running */
+ pwmcr = readl(imx->mmio_base + MX3_PWMCR);
+ if (!(pwmcr & MX3_PWMCR_EN))
+ pwm_imx27_clk_disable_unprepare(imx);
+
+ return devm_pwmchip_add(&pdev->dev, &imx->chip);
+}
+
+static struct platform_driver imx_pwm_driver = {
+ .driver = {
+ .name = "pwm-imx27",
+ .of_match_table = pwm_imx27_dt_ids,
+ },
+ .probe = pwm_imx27_probe,
+};
+module_platform_driver(imx_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");