1 files changed, 105 insertions, 0 deletions
diff --git a/drivers/soc/bcm/brcmstb/pm/aon_defs.h b/drivers/soc/bcm/brcmstb/pm/aon_defs.h
new file mode 100644
index 000000000..f695262ac
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/aon_defs.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Always ON (AON) register interface between bootloader and Linux
+ *
+ * Copyright © 2014-2017 Broadcom
+ */
+
+#ifndef __BRCMSTB_AON_DEFS_H__
+#define __BRCMSTB_AON_DEFS_H__
+
+#include <linux/compiler.h>
+
+/* Magic number in upper 16-bits */
+#define BRCMSTB_S3_MAGIC_MASK                   0xffff0000
+#define BRCMSTB_S3_MAGIC_SHORT                  0x5AFE0000
+
+enum {
+	/* Restore random key for AES memory verification (off = fixed key) */
+	S3_FLAG_LOAD_RANDKEY		= (1 << 0),
+
+	/* Scratch buffer page table is present */
+	S3_FLAG_SCRATCH_BUFFER_TABLE	= (1 << 1),
+
+	/* Skip all memory verification */
+	S3_FLAG_NO_MEM_VERIFY		= (1 << 2),
+
+	/*
+	 * Modification of this bit reserved for bootloader only.
+	 * 1=PSCI started Linux, 0=Direct jump to Linux.
+	 */
+	S3_FLAG_PSCI_BOOT		= (1 << 3),
+
+	/*
+	 * Modification of this bit reserved for bootloader only.
+	 * 1=64 bit boot, 0=32 bit boot.
+	 */
+	S3_FLAG_BOOTED64		= (1 << 4),
+};
+
+#define BRCMSTB_HASH_LEN			(128 / 8) /* 128-bit hash */
+
+#define AON_REG_MAGIC_FLAGS			0x00
+#define AON_REG_CONTROL_LOW			0x04
+#define AON_REG_CONTROL_HIGH			0x08
+#define AON_REG_S3_HASH				0x0c /* hash of S3 params */
+#define AON_REG_CONTROL_HASH_LEN		0x1c
+#define AON_REG_PANIC				0x20
+
+#define BRCMSTB_S3_MAGIC		0x5AFEB007
+#define BRCMSTB_PANIC_MAGIC		0x512E115E
+#define BOOTLOADER_SCRATCH_SIZE		64
+#define BRCMSTB_DTU_STATE_MAP_ENTRIES	(8*1024)
+#define BRCMSTB_DTU_CONFIG_ENTRIES	(512)
+#define BRCMSTB_DTU_COUNT		(2)
+
+#define IMAGE_DESCRIPTORS_BUFSIZE	(2 * 1024)
+#define S3_BOOTLOADER_RESERVED		(S3_FLAG_PSCI_BOOT | S3_FLAG_BOOTED64)
+
+struct brcmstb_bootloader_dtu_table {
+	uint32_t	dtu_state_map[BRCMSTB_DTU_STATE_MAP_ENTRIES];
+	uint32_t	dtu_config[BRCMSTB_DTU_CONFIG_ENTRIES];
+};
+
+/*
+ * Bootloader utilizes a custom parameter block left in DRAM for handling S3
+ * warm resume
+ */
+struct brcmstb_s3_params {
+	/* scratch memory for bootloader */
+	uint8_t scratch[BOOTLOADER_SCRATCH_SIZE];
+
+	uint32_t magic; /* BRCMSTB_S3_MAGIC */
+	uint64_t reentry; /* PA */
+
+	/* descriptors */
+	uint32_t hash[BRCMSTB_HASH_LEN / 4];
+
+	/*
+	 * If 0, then ignore this parameter (there is only one set of
+	 *   descriptors)
+	 *
+	 * If non-0, then a second set of descriptors is stored at:
+	 *
+	 *   descriptors + desc_offset_2
+	 *
+	 * The MAC result of both descriptors is XOR'd and stored in @hash
+	 */
+	uint32_t desc_offset_2;
+
+	/*
+	 * (Physical) address of a brcmstb_bootloader_scratch_table, for
+	 * providing a large DRAM buffer to the bootloader
+	 */
+	uint64_t buffer_table;
+
+	uint32_t spare[70];
+
+	uint8_t descriptors[IMAGE_DESCRIPTORS_BUFSIZE];
+	/*
+	 * Must be last member of struct. See brcmstb_pm_s3_finish() for reason.
+	 */
+	struct brcmstb_bootloader_dtu_table dtu[BRCMSTB_DTU_COUNT];
+} __packed;
+
+#endif /* __BRCMSTB_AON_DEFS_H__ */