diff options
Diffstat (limited to 'drivers/thermal/intel/Kconfig')
| -rw-r--r-- | drivers/thermal/intel/Kconfig | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig new file mode 100644 index 000000000..e3cfad10d --- /dev/null +++ b/drivers/thermal/intel/Kconfig @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only +config INTEL_POWERCLAMP + tristate "Intel PowerClamp idle injection driver" + depends on X86 + depends on CPU_SUP_INTEL + help + Enable this to enable Intel PowerClamp idle injection driver. This + enforce idle time which results in more package C-state residency. The + user interface is exposed via generic thermal framework. + +config X86_THERMAL_VECTOR + def_bool y + depends on X86 && CPU_SUP_INTEL && X86_LOCAL_APIC + +config X86_PKG_TEMP_THERMAL + tristate "X86 package temperature thermal driver" + depends on X86_THERMAL_VECTOR + select THERMAL_GOV_USER_SPACE + select THERMAL_WRITABLE_TRIPS + default m + help + Enable this to register CPU digital sensor for package temperature as + thermal zone. Each package will have its own thermal zone. There are + two trip points which can be set by user to get notifications via thermal + notification methods. + +config INTEL_SOC_DTS_IOSF_CORE + tristate + depends on X86 && PCI + select IOSF_MBI + help + This is becoming a common feature for Intel SoCs to expose the additional + digital temperature sensors (DTSs) using side band interface (IOSF). This + implements the common set of helper functions to register, get temperature + and get/set thresholds on DTSs. + +config INTEL_SOC_DTS_THERMAL + tristate "Intel SoCs DTS thermal driver" + depends on X86 && PCI && ACPI + select INTEL_SOC_DTS_IOSF_CORE + select THERMAL_WRITABLE_TRIPS + help + Enable this to register Intel SoCs (e.g. Bay Trail) platform digital + temperature sensor (DTS). These SoCs have two additional DTSs in + addition to DTSs on CPU cores. Each DTS will be registered as a + thermal zone. There are two trip points. One of the trip point can + be set by user mode programs to get notifications via Linux thermal + notification methods.The other trip is a critical trip point, which + was set by the driver based on the TJ MAX temperature. + +config INTEL_QUARK_DTS_THERMAL + tristate "Intel Quark DTS thermal driver" + depends on X86_INTEL_QUARK + help + Enable this to register Intel Quark SoC (e.g. X1000) platform digital + temperature sensor (DTS). For X1000 SoC, it has one on-die DTS. + The DTS will be registered as a thermal zone. There are two trip points: + hot & critical. The critical trip point default value is set by + underlying BIOS/Firmware. + +menu "ACPI INT340X thermal drivers" +source "drivers/thermal/intel/int340x_thermal/Kconfig" +endmenu + +config INTEL_BXT_PMIC_THERMAL + tristate "Intel Broxton PMIC thermal driver" + depends on X86 && INTEL_SOC_PMIC_BXTWC + select REGMAP + help + Select this driver for Intel Broxton PMIC with ADC channels monitoring + system temperature measurements and alerts. + This driver is used for monitoring the ADC channels of PMIC and handles + the alert trip point interrupts and notifies the thermal framework with + the trip point and temperature details of the zone. + +config INTEL_PCH_THERMAL + tristate "Intel PCH Thermal Reporting Driver" + depends on X86 && PCI + help + Enable this to support thermal reporting on certain intel PCHs. + Thermal reporting device will provide temperature reading, + programmable trip points and other information. + +config INTEL_TCC_COOLING + tristate "Intel TCC offset cooling Driver" + depends on X86 + help + Enable this to support system cooling by adjusting the effective TCC + activation temperature via the TCC Offset register, which is widely + supported on modern Intel platforms. + Note that, on different platforms, the behavior might be different + on how fast the setting takes effect, and how much the CPU frequency + is reduced. + +config INTEL_MENLOW + tristate "Thermal Management driver for Intel menlow platform" + depends on ACPI_THERMAL + help + ACPI thermal management enhancement driver on + Intel Menlow platform. + + If unsure, say N. + +config INTEL_HFI_THERMAL + bool "Intel Hardware Feedback Interface" + depends on NET + depends on CPU_SUP_INTEL + depends on X86_THERMAL_VECTOR + select THERMAL_NETLINK + help + Select this option to enable the Hardware Feedback Interface. If + selected, hardware provides guidance to the operating system on + the performance and energy efficiency capabilities of each CPU. + These capabilities may change as a result of changes in the operating + conditions of the system such power and thermal limits. If selected, + the kernel relays updates in CPUs' capabilities to userspace. |