diff options
Diffstat (limited to 'drivers/thermal/qcom/lmh.c')
| -rw-r--r-- | drivers/thermal/qcom/lmh.c | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c new file mode 100644 index 000000000..4122a51e9 --- /dev/null +++ b/drivers/thermal/qcom/lmh.c @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Copyright (C) 2021, Linaro Limited. All rights reserved. + */ +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irqdomain.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/qcom_scm.h> + +#define LMH_NODE_DCVS 0x44435653 +#define LMH_CLUSTER0_NODE_ID 0x6370302D +#define LMH_CLUSTER1_NODE_ID 0x6370312D + +#define LMH_SUB_FN_THERMAL 0x54484D4C +#define LMH_SUB_FN_CRNT 0x43524E54 +#define LMH_SUB_FN_REL 0x52454C00 +#define LMH_SUB_FN_BCL 0x42434C00 + +#define LMH_ALGO_MODE_ENABLE 0x454E424C +#define LMH_TH_HI_THRESHOLD 0x48494748 +#define LMH_TH_LOW_THRESHOLD 0x4C4F5700 +#define LMH_TH_ARM_THRESHOLD 0x41524D00 + +#define LMH_REG_DCVS_INTR_CLR 0x8 + +#define LMH_ENABLE_ALGOS 1 + +struct lmh_hw_data { + void __iomem *base; + struct irq_domain *domain; + int irq; +}; + +static irqreturn_t lmh_handle_irq(int hw_irq, void *data) +{ + struct lmh_hw_data *lmh_data = data; + int irq = irq_find_mapping(lmh_data->domain, 0); + + /* Call the cpufreq driver to handle the interrupt */ + if (irq) + generic_handle_irq(irq); + + return IRQ_HANDLED; +} + +static void lmh_enable_interrupt(struct irq_data *d) +{ + struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d); + + /* Clear the existing interrupt */ + writel(0xff, lmh_data->base + LMH_REG_DCVS_INTR_CLR); + enable_irq(lmh_data->irq); +} + +static void lmh_disable_interrupt(struct irq_data *d) +{ + struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d); + + disable_irq_nosync(lmh_data->irq); +} + +static struct irq_chip lmh_irq_chip = { + .name = "lmh", + .irq_enable = lmh_enable_interrupt, + .irq_disable = lmh_disable_interrupt +}; + +static int lmh_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) +{ + struct lmh_hw_data *lmh_data = d->host_data; + + irq_set_chip_and_handler(irq, &lmh_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, lmh_data); + + return 0; +} + +static const struct irq_domain_ops lmh_irq_ops = { + .map = lmh_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int lmh_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *cpu_node; + struct lmh_hw_data *lmh_data; + int temp_low, temp_high, temp_arm, cpu_id, ret; + unsigned int enable_alg; + u32 node_id; + + lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL); + if (!lmh_data) + return -ENOMEM; + + lmh_data->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(lmh_data->base)) + return PTR_ERR(lmh_data->base); + + cpu_node = of_parse_phandle(np, "cpus", 0); + if (!cpu_node) + return -EINVAL; + cpu_id = of_cpu_node_to_id(cpu_node); + of_node_put(cpu_node); + + ret = of_property_read_u32(np, "qcom,lmh-temp-high-millicelsius", &temp_high); + if (ret) { + dev_err(dev, "missing qcom,lmh-temp-high-millicelsius property\n"); + return ret; + } + + ret = of_property_read_u32(np, "qcom,lmh-temp-low-millicelsius", &temp_low); + if (ret) { + dev_err(dev, "missing qcom,lmh-temp-low-millicelsius property\n"); + return ret; + } + + ret = of_property_read_u32(np, "qcom,lmh-temp-arm-millicelsius", &temp_arm); + if (ret) { + dev_err(dev, "missing qcom,lmh-temp-arm-millicelsius property\n"); + return ret; + } + + /* + * Only sdm845 has lmh hardware currently enabled from hlos. If this is needed + * for other platforms, revisit this to check if the <cpu-id, node-id> should be part + * of a dt match table. + */ + if (cpu_id == 0) { + node_id = LMH_CLUSTER0_NODE_ID; + } else if (cpu_id == 4) { + node_id = LMH_CLUSTER1_NODE_ID; + } else { + dev_err(dev, "Wrong CPU id associated with LMh node\n"); + return -EINVAL; + } + + if (!qcom_scm_lmh_dcvsh_available()) + return -EINVAL; + + enable_alg = (uintptr_t)of_device_get_match_data(dev); + + if (enable_alg) { + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) + dev_err(dev, "Error %d enabling current subfunction\n", ret); + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) + dev_err(dev, "Error %d enabling reliability subfunction\n", ret); + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) + dev_err(dev, "Error %d enabling BCL subfunction\n", ret); + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1, + LMH_NODE_DCVS, node_id, 0); + if (ret) { + dev_err(dev, "Error %d enabling thermal subfunction\n", ret); + return ret; + } + + ret = qcom_scm_lmh_profile_change(0x1); + if (ret) { + dev_err(dev, "Error %d changing profile\n", ret); + return ret; + } + } + + /* Set default thermal trips */ + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_ARM_THRESHOLD, temp_arm, + LMH_NODE_DCVS, node_id, 0); + if (ret) { + dev_err(dev, "Error setting thermal ARM threshold%d\n", ret); + return ret; + } + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_HI_THRESHOLD, temp_high, + LMH_NODE_DCVS, node_id, 0); + if (ret) { + dev_err(dev, "Error setting thermal HI threshold%d\n", ret); + return ret; + } + + ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low, + LMH_NODE_DCVS, node_id, 0); + if (ret) { + dev_err(dev, "Error setting thermal ARM threshold%d\n", ret); + return ret; + } + + lmh_data->irq = platform_get_irq(pdev, 0); + lmh_data->domain = irq_domain_add_linear(np, 1, &lmh_irq_ops, lmh_data); + if (!lmh_data->domain) { + dev_err(dev, "Error adding irq_domain\n"); + return -EINVAL; + } + + /* Disable the irq and let cpufreq enable it when ready to handle the interrupt */ + irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN); + ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq, + IRQF_ONESHOT | IRQF_NO_SUSPEND, + "lmh-irq", lmh_data); + if (ret) { + dev_err(dev, "Error %d registering irq %x\n", ret, lmh_data->irq); + irq_domain_remove(lmh_data->domain); + return ret; + } + + return 0; +} + +static const struct of_device_id lmh_table[] = { + { .compatible = "qcom,sc8180x-lmh", }, + { .compatible = "qcom,sdm845-lmh", .data = (void *)LMH_ENABLE_ALGOS}, + { .compatible = "qcom,sm8150-lmh", }, + {} +}; +MODULE_DEVICE_TABLE(of, lmh_table); + +static struct platform_driver lmh_driver = { + .probe = lmh_probe, + .driver = { + .name = "qcom-lmh", + .of_match_table = lmh_table, + .suppress_bind_attrs = true, + }, +}; +module_platform_driver(lmh_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("QCOM LMh driver"); |