summaryrefslogtreecommitdiffstats
path: root/drivers/thermal/samsung
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal/samsung')
-rw-r--r--drivers/thermal/samsung/Kconfig11
-rw-r--r--drivers/thermal/samsung/Makefile6
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c1191
3 files changed, 1208 insertions, 0 deletions
diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
new file mode 100644
index 000000000..f4eff5a41
--- /dev/null
+++ b/drivers/thermal/samsung/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config EXYNOS_THERMAL
+ tristate "Exynos thermal management unit driver"
+ depends on THERMAL_OF
+ depends on HAS_IOMEM
+ help
+ If you say yes here you get support for the TMU (Thermal Management
+ Unit) driver for Samsung Exynos series of SoCs. This driver initialises
+ the TMU, reports temperature and handles cooling action if defined.
+ This driver uses the Exynos core thermal APIs and TMU configuration
+ data from the supported SoCs.
diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
new file mode 100644
index 000000000..f13940715
--- /dev/null
+++ b/drivers/thermal/samsung/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Samsung thermal specific Makefile
+#
+obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
+exynos_thermal-y := exynos_tmu.o
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
new file mode 100644
index 000000000..51874d0a2
--- /dev/null
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -0,0 +1,1191 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * exynos_tmu.c - Samsung Exynos TMU (Thermal Management Unit)
+ *
+ * Copyright (C) 2014 Samsung Electronics
+ * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+ * Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * Donggeun Kim <dg77.kim@samsung.com>
+ * Amit Daniel Kachhap <amit.kachhap@linaro.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#include "../thermal_core.h"
+
+/* Exynos generic registers */
+#define EXYNOS_TMU_REG_TRIMINFO 0x0
+#define EXYNOS_TMU_REG_CONTROL 0x20
+#define EXYNOS_TMU_REG_STATUS 0x28
+#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
+#define EXYNOS_TMU_REG_INTEN 0x70
+#define EXYNOS_TMU_REG_INTSTAT 0x74
+#define EXYNOS_TMU_REG_INTCLEAR 0x78
+
+#define EXYNOS_TMU_TEMP_MASK 0xff
+#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
+#define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f
+#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf
+#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
+#define EXYNOS_TMU_CORE_EN_SHIFT 0
+
+/* Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON1 0x10
+
+/* Exynos4210 specific registers */
+#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
+
+/* Exynos5250, Exynos4412, Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON2 0x14
+#define EXYNOS_THD_TEMP_RISE 0x50
+#define EXYNOS_THD_TEMP_FALL 0x54
+#define EXYNOS_EMUL_CON 0x80
+
+#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
+#define EXYNOS_TRIMINFO_25_SHIFT 0
+#define EXYNOS_TRIMINFO_85_SHIFT 8
+#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
+#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
+#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
+
+#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
+#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
+
+#define EXYNOS_EMUL_TIME 0x57F0
+#define EXYNOS_EMUL_TIME_MASK 0xffff
+#define EXYNOS_EMUL_TIME_SHIFT 16
+#define EXYNOS_EMUL_DATA_SHIFT 8
+#define EXYNOS_EMUL_DATA_MASK 0xFF
+#define EXYNOS_EMUL_ENABLE 0x1
+
+/* Exynos5260 specific */
+#define EXYNOS5260_TMU_REG_INTEN 0xC0
+#define EXYNOS5260_TMU_REG_INTSTAT 0xC4
+#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
+#define EXYNOS5260_EMUL_CON 0x100
+
+/* Exynos4412 specific */
+#define EXYNOS4412_MUX_ADDR_VALUE 6
+#define EXYNOS4412_MUX_ADDR_SHIFT 20
+
+/* Exynos5433 specific registers */
+#define EXYNOS5433_THD_TEMP_RISE3_0 0x050
+#define EXYNOS5433_THD_TEMP_RISE7_4 0x054
+#define EXYNOS5433_THD_TEMP_FALL3_0 0x060
+#define EXYNOS5433_THD_TEMP_FALL7_4 0x064
+#define EXYNOS5433_TMU_REG_INTEN 0x0c0
+#define EXYNOS5433_TMU_REG_INTPEND 0x0c8
+#define EXYNOS5433_TMU_EMUL_CON 0x110
+#define EXYNOS5433_TMU_PD_DET_EN 0x130
+
+#define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT 16
+#define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT 23
+#define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK \
+ (0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT)
+#define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK BIT(23)
+
+#define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING 0
+#define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING 1
+
+#define EXYNOS5433_PD_DET_EN 1
+
+#define EXYNOS5433_G3D_BASE 0x10070000
+
+/* Exynos7 specific registers */
+#define EXYNOS7_THD_TEMP_RISE7_6 0x50
+#define EXYNOS7_THD_TEMP_FALL7_6 0x60
+#define EXYNOS7_TMU_REG_INTEN 0x110
+#define EXYNOS7_TMU_REG_INTPEND 0x118
+#define EXYNOS7_TMU_REG_EMUL_CON 0x160
+
+#define EXYNOS7_TMU_TEMP_MASK 0x1ff
+#define EXYNOS7_PD_DET_EN_SHIFT 23
+#define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0
+#define EXYNOS7_EMUL_DATA_SHIFT 7
+#define EXYNOS7_EMUL_DATA_MASK 0x1ff
+
+#define EXYNOS_FIRST_POINT_TRIM 25
+#define EXYNOS_SECOND_POINT_TRIM 85
+
+#define EXYNOS_NOISE_CANCEL_MODE 4
+
+#define MCELSIUS 1000
+
+enum soc_type {
+ SOC_ARCH_EXYNOS3250 = 1,
+ SOC_ARCH_EXYNOS4210,
+ SOC_ARCH_EXYNOS4412,
+ SOC_ARCH_EXYNOS5250,
+ SOC_ARCH_EXYNOS5260,
+ SOC_ARCH_EXYNOS5420,
+ SOC_ARCH_EXYNOS5420_TRIMINFO,
+ SOC_ARCH_EXYNOS5433,
+ SOC_ARCH_EXYNOS7,
+};
+
+/**
+ * struct exynos_tmu_data : A structure to hold the private data of the TMU
+ * driver
+ * @id: identifier of the one instance of the TMU controller.
+ * @base: base address of the single instance of the TMU controller.
+ * @base_second: base address of the common registers of the TMU controller.
+ * @irq: irq number of the TMU controller.
+ * @soc: id of the SOC type.
+ * @irq_work: pointer to the irq work structure.
+ * @lock: lock to implement synchronization.
+ * @clk: pointer to the clock structure.
+ * @clk_sec: pointer to the clock structure for accessing the base_second.
+ * @sclk: pointer to the clock structure for accessing the tmu special clk.
+ * @cal_type: calibration type for temperature
+ * @efuse_value: SoC defined fuse value
+ * @min_efuse_value: minimum valid trimming data
+ * @max_efuse_value: maximum valid trimming data
+ * @temp_error1: fused value of the first point trim.
+ * @temp_error2: fused value of the second point trim.
+ * @gain: gain of amplifier in the positive-TC generator block
+ * 0 < gain <= 15
+ * @reference_voltage: reference voltage of amplifier
+ * in the positive-TC generator block
+ * 0 < reference_voltage <= 31
+ * @regulator: pointer to the TMU regulator structure.
+ * @reg_conf: pointer to structure to register with core thermal.
+ * @tzd: pointer to thermal_zone_device structure
+ * @ntrip: number of supported trip points.
+ * @enabled: current status of TMU device
+ * @tmu_set_trip_temp: SoC specific method to set trip (rising threshold)
+ * @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold)
+ * @tmu_initialize: SoC specific TMU initialization method
+ * @tmu_control: SoC specific TMU control method
+ * @tmu_read: SoC specific TMU temperature read method
+ * @tmu_set_emulation: SoC specific TMU emulation setting method
+ * @tmu_clear_irqs: SoC specific TMU interrupts clearing method
+ */
+struct exynos_tmu_data {
+ int id;
+ void __iomem *base;
+ void __iomem *base_second;
+ int irq;
+ enum soc_type soc;
+ struct work_struct irq_work;
+ struct mutex lock;
+ struct clk *clk, *clk_sec, *sclk;
+ u32 cal_type;
+ u32 efuse_value;
+ u32 min_efuse_value;
+ u32 max_efuse_value;
+ u16 temp_error1, temp_error2;
+ u8 gain;
+ u8 reference_voltage;
+ struct regulator *regulator;
+ struct thermal_zone_device *tzd;
+ unsigned int ntrip;
+ bool enabled;
+
+ void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip,
+ u8 temp);
+ void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip,
+ u8 temp, u8 hyst);
+ void (*tmu_initialize)(struct platform_device *pdev);
+ void (*tmu_control)(struct platform_device *pdev, bool on);
+ int (*tmu_read)(struct exynos_tmu_data *data);
+ void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp);
+ void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
+};
+
+/*
+ * TMU treats temperature as a mapped temperature code.
+ * The temperature is converted differently depending on the calibration type.
+ */
+static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
+{
+ if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
+ return temp + data->temp_error1 - EXYNOS_FIRST_POINT_TRIM;
+
+ return (temp - EXYNOS_FIRST_POINT_TRIM) *
+ (data->temp_error2 - data->temp_error1) /
+ (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) +
+ data->temp_error1;
+}
+
+/*
+ * Calculate a temperature value from a temperature code.
+ * The unit of the temperature is degree Celsius.
+ */
+static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
+{
+ if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
+ return temp_code - data->temp_error1 + EXYNOS_FIRST_POINT_TRIM;
+
+ return (temp_code - data->temp_error1) *
+ (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) /
+ (data->temp_error2 - data->temp_error1) +
+ EXYNOS_FIRST_POINT_TRIM;
+}
+
+static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
+{
+ u16 tmu_temp_mask =
+ (data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK
+ : EXYNOS_TMU_TEMP_MASK;
+
+ data->temp_error1 = trim_info & tmu_temp_mask;
+ data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
+ EXYNOS_TMU_TEMP_MASK);
+
+ if (!data->temp_error1 ||
+ (data->min_efuse_value > data->temp_error1) ||
+ (data->temp_error1 > data->max_efuse_value))
+ data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK;
+
+ if (!data->temp_error2)
+ data->temp_error2 =
+ (data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
+ EXYNOS_TMU_TEMP_MASK;
+}
+
+static int exynos_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct thermal_zone_device *tzd = data->tzd;
+ const struct thermal_trip * const trips =
+ of_thermal_get_trip_points(tzd);
+ unsigned int status;
+ int ret = 0, temp, hyst;
+
+ if (!trips) {
+ dev_err(&pdev->dev,
+ "Cannot get trip points from device tree!\n");
+ return -ENODEV;
+ }
+
+ if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
+ ret = tzd->ops->get_crit_temp(tzd, &temp);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "No CRITICAL trip point defined in device tree!\n");
+ goto out;
+ }
+
+ if (of_thermal_get_ntrips(tzd) > data->ntrip) {
+ dev_info(&pdev->dev,
+ "More trip points than supported by this TMU.\n");
+ dev_info(&pdev->dev,
+ "%d trip points should be configured in polling mode.\n",
+ (of_thermal_get_ntrips(tzd) - data->ntrip));
+ }
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+ if (!IS_ERR(data->clk_sec))
+ clk_enable(data->clk_sec);
+
+ status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+ if (!status) {
+ ret = -EBUSY;
+ } else {
+ int i, ntrips =
+ min_t(int, of_thermal_get_ntrips(tzd), data->ntrip);
+
+ data->tmu_initialize(pdev);
+
+ /* Write temperature code for rising and falling threshold */
+ for (i = 0; i < ntrips; i++) {
+ /* Write temperature code for rising threshold */
+ ret = tzd->ops->get_trip_temp(tzd, i, &temp);
+ if (ret)
+ goto err;
+ temp /= MCELSIUS;
+ data->tmu_set_trip_temp(data, i, temp);
+
+ /* Write temperature code for falling threshold */
+ ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
+ if (ret)
+ goto err;
+ hyst /= MCELSIUS;
+ data->tmu_set_trip_hyst(data, i, temp, hyst);
+ }
+
+ data->tmu_clear_irqs(data);
+ }
+err:
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+ if (!IS_ERR(data->clk_sec))
+ clk_disable(data->clk_sec);
+out:
+ return ret;
+}
+
+static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
+{
+ if (data->soc == SOC_ARCH_EXYNOS4412 ||
+ data->soc == SOC_ARCH_EXYNOS3250)
+ con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT);
+
+ con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+ con |= data->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
+
+ con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+ con |= (data->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+
+ con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
+ con |= (EXYNOS_NOISE_CANCEL_MODE << EXYNOS_TMU_TRIP_MODE_SHIFT);
+
+ return con;
+}
+
+static void exynos_tmu_control(struct platform_device *pdev, bool on)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+ data->tmu_control(pdev, on);
+ data->enabled = on;
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+}
+
+static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ const struct thermal_trip * const trips =
+ of_thermal_get_trip_points(data->tzd);
+ u8 ref, th_code;
+
+ ref = trips[0].temperature / MCELSIUS;
+
+ if (trip == 0) {
+ th_code = temp_to_code(data, ref);
+ writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
+ }
+
+ temp -= ref;
+ writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
+}
+
+/* failing thresholds are not supported on Exynos4210 */
+static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+}
+
+static void exynos4210_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
+ sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
+}
+
+static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ u32 th, con;
+
+ th = readl(data->base + EXYNOS_THD_TEMP_RISE);
+ th &= ~(0xff << 8 * trip);
+ th |= temp_to_code(data, temp) << 8 * trip;
+ writel(th, data->base + EXYNOS_THD_TEMP_RISE);
+
+ if (trip == 3) {
+ con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
+ con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+ }
+}
+
+static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ u32 th;
+
+ th = readl(data->base + EXYNOS_THD_TEMP_FALL);
+ th &= ~(0xff << 8 * trip);
+ if (hyst)
+ th |= temp_to_code(data, temp - hyst) << 8 * trip;
+ writel(th, data->base + EXYNOS_THD_TEMP_FALL);
+}
+
+static void exynos4412_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ unsigned int trim_info, ctrl;
+
+ if (data->soc == SOC_ARCH_EXYNOS3250 ||
+ data->soc == SOC_ARCH_EXYNOS4412 ||
+ data->soc == SOC_ARCH_EXYNOS5250) {
+ if (data->soc == SOC_ARCH_EXYNOS3250) {
+ ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
+ ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
+ writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
+ }
+ ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
+ ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
+ writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
+ }
+
+ /* On exynos5420 the triminfo register is in the shared space */
+ if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
+ trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO);
+ else
+ trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+
+ sanitize_temp_error(data, trim_info);
+}
+
+static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ unsigned int reg_off, j;
+ u32 th;
+
+ if (trip > 3) {
+ reg_off = EXYNOS5433_THD_TEMP_RISE7_4;
+ j = trip - 4;
+ } else {
+ reg_off = EXYNOS5433_THD_TEMP_RISE3_0;
+ j = trip;
+ }
+
+ th = readl(data->base + reg_off);
+ th &= ~(0xff << j * 8);
+ th |= (temp_to_code(data, temp) << j * 8);
+ writel(th, data->base + reg_off);
+}
+
+static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ unsigned int reg_off, j;
+ u32 th;
+
+ if (trip > 3) {
+ reg_off = EXYNOS5433_THD_TEMP_FALL7_4;
+ j = trip - 4;
+ } else {
+ reg_off = EXYNOS5433_THD_TEMP_FALL3_0;
+ j = trip;
+ }
+
+ th = readl(data->base + reg_off);
+ th &= ~(0xff << j * 8);
+ th |= (temp_to_code(data, temp - hyst) << j * 8);
+ writel(th, data->base + reg_off);
+}
+
+static void exynos5433_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ unsigned int trim_info;
+ int sensor_id, cal_type;
+
+ trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+ sanitize_temp_error(data, trim_info);
+
+ /* Read the temperature sensor id */
+ sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK)
+ >> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT;
+ dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id);
+
+ /* Read the calibration mode */
+ writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO);
+ cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK)
+ >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT;
+
+ switch (cal_type) {
+ case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
+ data->cal_type = TYPE_TWO_POINT_TRIMMING;
+ break;
+ case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
+ default:
+ data->cal_type = TYPE_ONE_POINT_TRIMMING;
+ break;
+ }
+
+ dev_info(&pdev->dev, "Calibration type is %d-point calibration\n",
+ cal_type ? 2 : 1);
+}
+
+static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ unsigned int reg_off, bit_off;
+ u32 th;
+
+ reg_off = ((7 - trip) / 2) * 4;
+ bit_off = ((8 - trip) % 2);
+
+ th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+ th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ th |= temp_to_code(data, temp) << (16 * bit_off);
+ writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+}
+
+static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ unsigned int reg_off, bit_off;
+ u32 th;
+
+ reg_off = ((7 - trip) / 2) * 4;
+ bit_off = ((8 - trip) % 2);
+
+ th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+ th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ th |= temp_to_code(data, temp - hyst) << (16 * bit_off);
+ writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+}
+
+static void exynos7_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ unsigned int trim_info;
+
+ trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+ sanitize_temp_error(data, trim_info);
+}
+
+static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct thermal_zone_device *tz = data->tzd;
+ unsigned int con, interrupt_en = 0, i;
+
+ con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
+
+ if (on) {
+ for (i = 0; i < data->ntrip; i++) {
+ if (!of_thermal_is_trip_valid(tz, i))
+ continue;
+
+ interrupt_en |=
+ (1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4));
+ }
+
+ if (data->soc != SOC_ARCH_EXYNOS4210)
+ interrupt_en |=
+ interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ } else {
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ }
+
+ writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+}
+
+static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct thermal_zone_device *tz = data->tzd;
+ unsigned int con, interrupt_en = 0, pd_det_en, i;
+
+ con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
+
+ if (on) {
+ for (i = 0; i < data->ntrip; i++) {
+ if (!of_thermal_is_trip_valid(tz, i))
+ continue;
+
+ interrupt_en |=
+ (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
+ }
+
+ interrupt_en |=
+ interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ } else
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+
+ pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
+
+ writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN);
+ writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+}
+
+static void exynos7_tmu_control(struct platform_device *pdev, bool on)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct thermal_zone_device *tz = data->tzd;
+ unsigned int con, interrupt_en = 0, i;
+
+ con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
+
+ if (on) {
+ for (i = 0; i < data->ntrip; i++) {
+ if (!of_thermal_is_trip_valid(tz, i))
+ continue;
+
+ interrupt_en |=
+ (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
+ }
+
+ interrupt_en |=
+ interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
+ } else {
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT);
+ }
+
+ writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+}
+
+static int exynos_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+ struct exynos_tmu_data *data = tz->devdata;
+ int value, ret = 0;
+
+ if (!data || !data->tmu_read)
+ return -EINVAL;
+ else if (!data->enabled)
+ /*
+ * Called too early, probably
+ * from thermal_zone_of_sensor_register().
+ */
+ return -EAGAIN;
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+
+ value = data->tmu_read(data);
+ if (value < 0)
+ ret = value;
+ else
+ *temp = code_to_temp(data, value) * MCELSIUS;
+
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_THERMAL_EMULATION
+static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
+ int temp)
+{
+ if (temp) {
+ temp /= MCELSIUS;
+
+ val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
+ val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
+ if (data->soc == SOC_ARCH_EXYNOS7) {
+ val &= ~(EXYNOS7_EMUL_DATA_MASK <<
+ EXYNOS7_EMUL_DATA_SHIFT);
+ val |= (temp_to_code(data, temp) <<
+ EXYNOS7_EMUL_DATA_SHIFT) |
+ EXYNOS_EMUL_ENABLE;
+ } else {
+ val &= ~(EXYNOS_EMUL_DATA_MASK <<
+ EXYNOS_EMUL_DATA_SHIFT);
+ val |= (temp_to_code(data, temp) <<
+ EXYNOS_EMUL_DATA_SHIFT) |
+ EXYNOS_EMUL_ENABLE;
+ }
+ } else {
+ val &= ~EXYNOS_EMUL_ENABLE;
+ }
+
+ return val;
+}
+
+static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
+ int temp)
+{
+ unsigned int val;
+ u32 emul_con;
+
+ if (data->soc == SOC_ARCH_EXYNOS5260)
+ emul_con = EXYNOS5260_EMUL_CON;
+ else if (data->soc == SOC_ARCH_EXYNOS5433)
+ emul_con = EXYNOS5433_TMU_EMUL_CON;
+ else if (data->soc == SOC_ARCH_EXYNOS7)
+ emul_con = EXYNOS7_TMU_REG_EMUL_CON;
+ else
+ emul_con = EXYNOS_EMUL_CON;
+
+ val = readl(data->base + emul_con);
+ val = get_emul_con_reg(data, val, temp);
+ writel(val, data->base + emul_con);
+}
+
+static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
+{
+ struct exynos_tmu_data *data = tz->devdata;
+ int ret = -EINVAL;
+
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ goto out;
+
+ if (temp && temp < MCELSIUS)
+ goto out;
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+ data->tmu_set_emulation(data, temp);
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+ return 0;
+out:
+ return ret;
+}
+#else
+#define exynos4412_tmu_set_emulation NULL
+static int exynos_tmu_set_emulation(struct thermal_zone_device *tz, int temp)
+ { return -EINVAL; }
+#endif /* CONFIG_THERMAL_EMULATION */
+
+static int exynos4210_tmu_read(struct exynos_tmu_data *data)
+{
+ int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
+
+ /* "temp_code" should range between 75 and 175 */
+ return (ret < 75 || ret > 175) ? -ENODATA : ret;
+}
+
+static int exynos4412_tmu_read(struct exynos_tmu_data *data)
+{
+ return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
+}
+
+static int exynos7_tmu_read(struct exynos_tmu_data *data)
+{
+ return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
+ EXYNOS7_TMU_TEMP_MASK;
+}
+
+static void exynos_tmu_work(struct work_struct *work)
+{
+ struct exynos_tmu_data *data = container_of(work,
+ struct exynos_tmu_data, irq_work);
+
+ thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+
+ /* TODO: take action based on particular interrupt */
+ data->tmu_clear_irqs(data);
+
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+ enable_irq(data->irq);
+}
+
+static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
+{
+ unsigned int val_irq;
+ u32 tmu_intstat, tmu_intclear;
+
+ if (data->soc == SOC_ARCH_EXYNOS5260) {
+ tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT;
+ tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR;
+ } else if (data->soc == SOC_ARCH_EXYNOS7) {
+ tmu_intstat = EXYNOS7_TMU_REG_INTPEND;
+ tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
+ } else if (data->soc == SOC_ARCH_EXYNOS5433) {
+ tmu_intstat = EXYNOS5433_TMU_REG_INTPEND;
+ tmu_intclear = EXYNOS5433_TMU_REG_INTPEND;
+ } else {
+ tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
+ tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
+ }
+
+ val_irq = readl(data->base + tmu_intstat);
+ /*
+ * Clear the interrupts. Please note that the documentation for
+ * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
+ * states that INTCLEAR register has a different placing of bits
+ * responsible for FALL IRQs than INTSTAT register. Exynos5420
+ * and Exynos5440 documentation is correct (Exynos4210 doesn't
+ * support FALL IRQs at all).
+ */
+ writel(val_irq, data->base + tmu_intclear);
+}
+
+static irqreturn_t exynos_tmu_irq(int irq, void *id)
+{
+ struct exynos_tmu_data *data = id;
+
+ disable_irq_nosync(irq);
+ schedule_work(&data->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static const struct of_device_id exynos_tmu_match[] = {
+ {
+ .compatible = "samsung,exynos3250-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS3250,
+ }, {
+ .compatible = "samsung,exynos4210-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS4210,
+ }, {
+ .compatible = "samsung,exynos4412-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS4412,
+ }, {
+ .compatible = "samsung,exynos5250-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5250,
+ }, {
+ .compatible = "samsung,exynos5260-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5260,
+ }, {
+ .compatible = "samsung,exynos5420-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5420,
+ }, {
+ .compatible = "samsung,exynos5420-tmu-ext-triminfo",
+ .data = (const void *)SOC_ARCH_EXYNOS5420_TRIMINFO,
+ }, {
+ .compatible = "samsung,exynos5433-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5433,
+ }, {
+ .compatible = "samsung,exynos7-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS7,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, exynos_tmu_match);
+
+static int exynos_map_dt_data(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct resource res;
+
+ if (!data || !pdev->dev.of_node)
+ return -ENODEV;
+
+ data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
+ if (data->id < 0)
+ data->id = 0;
+
+ data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (data->irq <= 0) {
+ dev_err(&pdev->dev, "failed to get IRQ\n");
+ return -ENODEV;
+ }
+
+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
+ dev_err(&pdev->dev, "failed to get Resource 0\n");
+ return -ENODEV;
+ }
+
+ data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
+ if (!data->base) {
+ dev_err(&pdev->dev, "Failed to ioremap memory\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ data->soc = (enum soc_type)of_device_get_match_data(&pdev->dev);
+
+ switch (data->soc) {
+ case SOC_ARCH_EXYNOS4210:
+ data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst;
+ data->tmu_initialize = exynos4210_tmu_initialize;
+ data->tmu_control = exynos4210_tmu_control;
+ data->tmu_read = exynos4210_tmu_read;
+ data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+ data->ntrip = 4;
+ data->gain = 15;
+ data->reference_voltage = 7;
+ data->efuse_value = 55;
+ data->min_efuse_value = 40;
+ data->max_efuse_value = 100;
+ break;
+ case SOC_ARCH_EXYNOS3250:
+ case SOC_ARCH_EXYNOS4412:
+ case SOC_ARCH_EXYNOS5250:
+ case SOC_ARCH_EXYNOS5260:
+ case SOC_ARCH_EXYNOS5420:
+ case SOC_ARCH_EXYNOS5420_TRIMINFO:
+ data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst;
+ data->tmu_initialize = exynos4412_tmu_initialize;
+ data->tmu_control = exynos4210_tmu_control;
+ data->tmu_read = exynos4412_tmu_read;
+ data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+ data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+ data->ntrip = 4;
+ data->gain = 8;
+ data->reference_voltage = 16;
+ data->efuse_value = 55;
+ if (data->soc != SOC_ARCH_EXYNOS5420 &&
+ data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
+ data->min_efuse_value = 40;
+ else
+ data->min_efuse_value = 0;
+ data->max_efuse_value = 100;
+ break;
+ case SOC_ARCH_EXYNOS5433:
+ data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst;
+ data->tmu_initialize = exynos5433_tmu_initialize;
+ data->tmu_control = exynos5433_tmu_control;
+ data->tmu_read = exynos4412_tmu_read;
+ data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+ data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+ data->ntrip = 8;
+ data->gain = 8;
+ if (res.start == EXYNOS5433_G3D_BASE)
+ data->reference_voltage = 23;
+ else
+ data->reference_voltage = 16;
+ data->efuse_value = 75;
+ data->min_efuse_value = 40;
+ data->max_efuse_value = 150;
+ break;
+ case SOC_ARCH_EXYNOS7:
+ data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst;
+ data->tmu_initialize = exynos7_tmu_initialize;
+ data->tmu_control = exynos7_tmu_control;
+ data->tmu_read = exynos7_tmu_read;
+ data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+ data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+ data->ntrip = 8;
+ data->gain = 9;
+ data->reference_voltage = 17;
+ data->efuse_value = 75;
+ data->min_efuse_value = 15;
+ data->max_efuse_value = 100;
+ break;
+ default:
+ dev_err(&pdev->dev, "Platform not supported\n");
+ return -EINVAL;
+ }
+
+ data->cal_type = TYPE_ONE_POINT_TRIMMING;
+
+ /*
+ * Check if the TMU shares some registers and then try to map the
+ * memory of common registers.
+ */
+ if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
+ return 0;
+
+ if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
+ dev_err(&pdev->dev, "failed to get Resource 1\n");
+ return -ENODEV;
+ }
+
+ data->base_second = devm_ioremap(&pdev->dev, res.start,
+ resource_size(&res));
+ if (!data->base_second) {
+ dev_err(&pdev->dev, "Failed to ioremap memory\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static const struct thermal_zone_device_ops exynos_sensor_ops = {
+ .get_temp = exynos_get_temp,
+ .set_emul_temp = exynos_tmu_set_emulation,
+};
+
+static int exynos_tmu_probe(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data;
+ int ret;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, data);
+ mutex_init(&data->lock);
+
+ /*
+ * Try enabling the regulator if found
+ * TODO: Add regulator as an SOC feature, so that regulator enable
+ * is a compulsory call.
+ */
+ data->regulator = devm_regulator_get_optional(&pdev->dev, "vtmu");
+ if (!IS_ERR(data->regulator)) {
+ ret = regulator_enable(data->regulator);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable vtmu\n");
+ return ret;
+ }
+ } else {
+ if (PTR_ERR(data->regulator) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
+ }
+
+ ret = exynos_map_dt_data(pdev);
+ if (ret)
+ goto err_sensor;
+
+ INIT_WORK(&data->irq_work, exynos_tmu_work);
+
+ data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
+ if (IS_ERR(data->clk)) {
+ dev_err(&pdev->dev, "Failed to get clock\n");
+ ret = PTR_ERR(data->clk);
+ goto err_sensor;
+ }
+
+ data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
+ if (IS_ERR(data->clk_sec)) {
+ if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
+ dev_err(&pdev->dev, "Failed to get triminfo clock\n");
+ ret = PTR_ERR(data->clk_sec);
+ goto err_sensor;
+ }
+ } else {
+ ret = clk_prepare(data->clk_sec);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get clock\n");
+ goto err_sensor;
+ }
+ }
+
+ ret = clk_prepare(data->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get clock\n");
+ goto err_clk_sec;
+ }
+
+ switch (data->soc) {
+ case SOC_ARCH_EXYNOS5433:
+ case SOC_ARCH_EXYNOS7:
+ data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
+ if (IS_ERR(data->sclk)) {
+ dev_err(&pdev->dev, "Failed to get sclk\n");
+ ret = PTR_ERR(data->sclk);
+ goto err_clk;
+ } else {
+ ret = clk_prepare_enable(data->sclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to enable sclk\n");
+ goto err_clk;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * data->tzd must be registered before calling exynos_tmu_initialize(),
+ * requesting irq and calling exynos_tmu_control().
+ */
+ data->tzd = devm_thermal_of_zone_register(&pdev->dev, 0, data,
+ &exynos_sensor_ops);
+ if (IS_ERR(data->tzd)) {
+ ret = PTR_ERR(data->tzd);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to register sensor: %d\n",
+ ret);
+ goto err_sclk;
+ }
+
+ ret = exynos_tmu_initialize(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialize TMU\n");
+ goto err_sclk;
+ }
+
+ ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
+ IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
+ goto err_sclk;
+ }
+
+ exynos_tmu_control(pdev, true);
+ return 0;
+
+err_sclk:
+ clk_disable_unprepare(data->sclk);
+err_clk:
+ clk_unprepare(data->clk);
+err_clk_sec:
+ if (!IS_ERR(data->clk_sec))
+ clk_unprepare(data->clk_sec);
+err_sensor:
+ if (!IS_ERR(data->regulator))
+ regulator_disable(data->regulator);
+
+ return ret;
+}
+
+static int exynos_tmu_remove(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
+ exynos_tmu_control(pdev, false);
+
+ clk_disable_unprepare(data->sclk);
+ clk_unprepare(data->clk);
+ if (!IS_ERR(data->clk_sec))
+ clk_unprepare(data->clk_sec);
+
+ if (!IS_ERR(data->regulator))
+ regulator_disable(data->regulator);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_tmu_suspend(struct device *dev)
+{
+ exynos_tmu_control(to_platform_device(dev), false);
+
+ return 0;
+}
+
+static int exynos_tmu_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ exynos_tmu_initialize(pdev);
+ exynos_tmu_control(pdev, true);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
+ exynos_tmu_suspend, exynos_tmu_resume);
+#define EXYNOS_TMU_PM (&exynos_tmu_pm)
+#else
+#define EXYNOS_TMU_PM NULL
+#endif
+
+static struct platform_driver exynos_tmu_driver = {
+ .driver = {
+ .name = "exynos-tmu",
+ .pm = EXYNOS_TMU_PM,
+ .of_match_table = exynos_tmu_match,
+ },
+ .probe = exynos_tmu_probe,
+ .remove = exynos_tmu_remove,
+};
+
+module_platform_driver(exynos_tmu_driver);
+
+MODULE_DESCRIPTION("Exynos TMU Driver");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:exynos-tmu");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 18:44:28 +0000