summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/icom.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/icom.c')
-rw-r--r--drivers/tty/serial/icom.c1876
1 files changed, 1876 insertions, 0 deletions
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
new file mode 100644
index 000000000..819f957b6
--- /dev/null
+++ b/drivers/tty/serial/icom.c
@@ -0,0 +1,1876 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * icom.c
+ *
+ * Copyright (C) 2001 IBM Corporation. All rights reserved.
+ *
+ * Serial device driver.
+ *
+ * Based on code from serial.c
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/termios.h>
+#include <linux/fs.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+#include <linux/firmware.h>
+#include <linux/bitops.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <linux/uaccess.h>
+
+/*#define ICOM_TRACE enable port trace capabilities */
+
+#define ICOM_DRIVER_NAME "icom"
+#define NR_PORTS 128
+
+static const unsigned int icom_acfg_baud[] = {
+ 300,
+ 600,
+ 900,
+ 1200,
+ 1800,
+ 2400,
+ 3600,
+ 4800,
+ 7200,
+ 9600,
+ 14400,
+ 19200,
+ 28800,
+ 38400,
+ 57600,
+ 76800,
+ 115200,
+ 153600,
+ 230400,
+ 307200,
+ 460800,
+};
+#define BAUD_TABLE_LIMIT (ARRAY_SIZE(icom_acfg_baud) - 1)
+
+struct icom_regs {
+ u32 control; /* Adapter Control Register */
+ u32 interrupt; /* Adapter Interrupt Register */
+ u32 int_mask; /* Adapter Interrupt Mask Reg */
+ u32 int_pri; /* Adapter Interrupt Priority r */
+ u32 int_reg_b; /* Adapter non-masked Interrupt */
+ u32 resvd01;
+ u32 resvd02;
+ u32 resvd03;
+ u32 control_2; /* Adapter Control Register 2 */
+ u32 interrupt_2; /* Adapter Interrupt Register 2 */
+ u32 int_mask_2; /* Adapter Interrupt Mask 2 */
+ u32 int_pri_2; /* Adapter Interrupt Prior 2 */
+ u32 int_reg_2b; /* Adapter non-masked 2 */
+};
+
+struct func_dram {
+ u32 reserved[108]; /* 0-1B0 reserved by personality code */
+ u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */
+ u8 RcvStnAddr; /* 1B4 Receive Station Addr */
+ u8 IdleState; /* 1B5 Idle State */
+ u8 IdleMonitor; /* 1B6 Idle Monitor */
+ u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */
+ u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */
+ u8 StartXmitCmd; /* 1BC Start Xmit Command */
+ u8 HDLCConfigReg; /* 1BD Reserved */
+ u8 CauseCode; /* 1BE Cause code for fatal error */
+ u8 xchar; /* 1BF High priority send */
+ u32 reserved3; /* 1C0-1C3 Reserved */
+ u8 PrevCmdReg; /* 1C4 Reserved */
+ u8 CmdReg; /* 1C5 Command Register */
+ u8 async_config2; /* 1C6 Async Config Byte 2 */
+ u8 async_config3; /* 1C7 Async Config Byte 3 */
+ u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */
+ u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */
+ u8 misc_flags; /* 1DD misc flags */
+#define V2_HARDWARE 0x40
+#define ICOM_HDW_ACTIVE 0x01
+ u8 call_length; /* 1DE Phone #/CFI buff ln */
+ u8 call_length2; /* 1DF Upper byte (unused) */
+ u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */
+ u16 timer_value; /* 1E4-1E5 general timer value */
+ u8 timer_command; /* 1E6 general timer cmd */
+ u8 dce_command; /* 1E7 dce command reg */
+ u8 dce_cmd_status; /* 1E8 dce command stat */
+ u8 x21_r1_ioff; /* 1E9 dce ready counter */
+ u8 x21_r0_ioff; /* 1EA dce not ready ctr */
+ u8 x21_ralt_ioff; /* 1EB dce CNR counter */
+ u8 x21_r1_ion; /* 1EC dce ready I on ctr */
+ u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */
+ u8 ier; /* 1EE Interrupt Enable */
+ u8 isr; /* 1EF Input Signal Reg */
+ u8 osr; /* 1F0 Output Signal Reg */
+ u8 reset; /* 1F1 Reset/Reload Reg */
+ u8 disable; /* 1F2 Disable Reg */
+ u8 sync; /* 1F3 Sync Reg */
+ u8 error_stat; /* 1F4 Error Status */
+ u8 cable_id; /* 1F5 Cable ID */
+ u8 cs_length; /* 1F6 CS Load Length */
+ u8 mac_length; /* 1F7 Mac Load Length */
+ u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */
+ u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */
+};
+
+/*
+ * adapter defines and structures
+ */
+#define ICOM_CONTROL_START_A 0x00000008
+#define ICOM_CONTROL_STOP_A 0x00000004
+#define ICOM_CONTROL_START_B 0x00000002
+#define ICOM_CONTROL_STOP_B 0x00000001
+#define ICOM_CONTROL_START_C 0x00000008
+#define ICOM_CONTROL_STOP_C 0x00000004
+#define ICOM_CONTROL_START_D 0x00000002
+#define ICOM_CONTROL_STOP_D 0x00000001
+#define ICOM_IRAM_OFFSET 0x1000
+#define ICOM_IRAM_SIZE 0x0C00
+#define ICOM_DCE_IRAM_OFFSET 0x0A00
+#define ICOM_CABLE_ID_VALID 0x01
+#define ICOM_CABLE_ID_MASK 0xF0
+#define ICOM_DISABLE 0x80
+#define CMD_XMIT_RCV_ENABLE 0xC0
+#define CMD_XMIT_ENABLE 0x40
+#define CMD_RCV_DISABLE 0x00
+#define CMD_RCV_ENABLE 0x80
+#define CMD_RESTART 0x01
+#define CMD_HOLD_XMIT 0x02
+#define CMD_SND_BREAK 0x04
+#define RS232_CABLE 0x06
+#define V24_CABLE 0x0E
+#define V35_CABLE 0x0C
+#define V36_CABLE 0x02
+#define NO_CABLE 0x00
+#define START_DOWNLOAD 0x80
+#define ICOM_INT_MASK_PRC_A 0x00003FFF
+#define ICOM_INT_MASK_PRC_B 0x3FFF0000
+#define ICOM_INT_MASK_PRC_C 0x00003FFF
+#define ICOM_INT_MASK_PRC_D 0x3FFF0000
+#define INT_RCV_COMPLETED 0x1000
+#define INT_XMIT_COMPLETED 0x2000
+#define INT_IDLE_DETECT 0x0800
+#define INT_RCV_DISABLED 0x0400
+#define INT_XMIT_DISABLED 0x0200
+#define INT_RCV_XMIT_SHUTDOWN 0x0100
+#define INT_FATAL_ERROR 0x0080
+#define INT_CABLE_PULL 0x0020
+#define INT_SIGNAL_CHANGE 0x0010
+#define HDLC_PPP_PURE_ASYNC 0x02
+#define HDLC_FF_FILL 0x00
+#define HDLC_HDW_FLOW 0x01
+#define START_XMIT 0x80
+#define ICOM_ACFG_DRIVE1 0x20
+#define ICOM_ACFG_NO_PARITY 0x00
+#define ICOM_ACFG_PARITY_ENAB 0x02
+#define ICOM_ACFG_PARITY_ODD 0x01
+#define ICOM_ACFG_8BPC 0x00
+#define ICOM_ACFG_7BPC 0x04
+#define ICOM_ACFG_6BPC 0x08
+#define ICOM_ACFG_5BPC 0x0C
+#define ICOM_ACFG_1STOP_BIT 0x00
+#define ICOM_ACFG_2STOP_BIT 0x10
+#define ICOM_DTR 0x80
+#define ICOM_RTS 0x40
+#define ICOM_RI 0x08
+#define ICOM_DSR 0x80
+#define ICOM_DCD 0x20
+#define ICOM_CTS 0x40
+
+#define NUM_XBUFFS 1
+#define NUM_RBUFFS 2
+#define RCV_BUFF_SZ 0x0200
+#define XMIT_BUFF_SZ 0x1000
+struct statusArea {
+ /**********************************************/
+ /* Transmit Status Area */
+ /**********************************************/
+ struct xmit_status_area{
+ __le32 leNext; /* Next entry in Little Endian on Adapter */
+ __le32 leNextASD;
+ __le32 leBuffer; /* Buffer for entry in LE for Adapter */
+ __le16 leLengthASD;
+ __le16 leOffsetASD;
+ __le16 leLength; /* Length of data in segment */
+ __le16 flags;
+#define SA_FLAGS_DONE 0x0080 /* Done with Segment */
+#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */
+#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */
+#define SA_FLAGS_READY_TO_XMIT 0x0800
+#define SA_FLAGS_STAT_MASK 0x007F
+ } xmit[NUM_XBUFFS];
+
+ /**********************************************/
+ /* Receive Status Area */
+ /**********************************************/
+ struct {
+ __le32 leNext; /* Next entry in Little Endian on Adapter */
+ __le32 leNextASD;
+ __le32 leBuffer; /* Buffer for entry in LE for Adapter */
+ __le16 WorkingLength; /* size of segment */
+ __le16 reserv01;
+ __le16 leLength; /* Length of data in segment */
+ __le16 flags;
+#define SA_FL_RCV_DONE 0x0010 /* Data ready */
+#define SA_FLAGS_OVERRUN 0x0040
+#define SA_FLAGS_PARITY_ERROR 0x0080
+#define SA_FLAGS_FRAME_ERROR 0x0001
+#define SA_FLAGS_FRAME_TRUNC 0x0002
+#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */
+#define SA_FLAGS_RCV_MASK 0xFFE6
+ } rcv[NUM_RBUFFS];
+};
+
+struct icom_adapter;
+
+
+#define ICOM_MAJOR 243
+#define ICOM_MINOR_START 0
+
+struct icom_port {
+ struct uart_port uart_port;
+ unsigned char cable_id;
+ unsigned char read_status_mask;
+ unsigned char ignore_status_mask;
+ void __iomem * int_reg;
+ struct icom_regs __iomem *global_reg;
+ struct func_dram __iomem *dram;
+ int port;
+ struct statusArea *statStg;
+ dma_addr_t statStg_pci;
+ __le32 *xmitRestart;
+ dma_addr_t xmitRestart_pci;
+ unsigned char *xmit_buf;
+ dma_addr_t xmit_buf_pci;
+ unsigned char *recv_buf;
+ dma_addr_t recv_buf_pci;
+ int next_rcv;
+ int status;
+#define ICOM_PORT_ACTIVE 1 /* Port exists. */
+#define ICOM_PORT_OFF 0 /* Port does not exist. */
+ struct icom_adapter *adapter;
+};
+
+struct icom_adapter {
+ void __iomem * base_addr;
+ unsigned long base_addr_pci;
+ struct pci_dev *pci_dev;
+ struct icom_port port_info[4];
+ int index;
+ int version;
+#define ADAPTER_V1 0x0001
+#define ADAPTER_V2 0x0002
+ u32 subsystem_id;
+#define FOUR_PORT_MODEL 0x0252
+#define V2_TWO_PORTS_RVX 0x021A
+#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251
+ int numb_ports;
+ struct list_head icom_adapter_entry;
+ struct kref kref;
+};
+
+/* prototype */
+extern void iCom_sercons_init(void);
+
+struct lookup_proc_table {
+ u32 __iomem *global_control_reg;
+ unsigned long processor_id;
+};
+
+struct lookup_int_table {
+ u32 __iomem *global_int_mask;
+ unsigned long processor_id;
+};
+
+static inline struct icom_port *to_icom_port(struct uart_port *port)
+{
+ return container_of(port, struct icom_port, uart_port);
+}
+
+static const struct pci_device_id icom_pci_table[] = {
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = ADAPTER_V1,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
+ .subvendor = PCI_VENDOR_ID_IBM,
+ .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX,
+ .driver_data = ADAPTER_V2,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
+ .subvendor = PCI_VENDOR_ID_IBM,
+ .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM,
+ .driver_data = ADAPTER_V2,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
+ .subvendor = PCI_VENDOR_ID_IBM,
+ .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL,
+ .driver_data = ADAPTER_V2,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
+ .subvendor = PCI_VENDOR_ID_IBM,
+ .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE,
+ .driver_data = ADAPTER_V2,
+ },
+ {}
+};
+
+static struct lookup_proc_table start_proc[4] = {
+ {NULL, ICOM_CONTROL_START_A},
+ {NULL, ICOM_CONTROL_START_B},
+ {NULL, ICOM_CONTROL_START_C},
+ {NULL, ICOM_CONTROL_START_D}
+};
+
+
+static struct lookup_proc_table stop_proc[4] = {
+ {NULL, ICOM_CONTROL_STOP_A},
+ {NULL, ICOM_CONTROL_STOP_B},
+ {NULL, ICOM_CONTROL_STOP_C},
+ {NULL, ICOM_CONTROL_STOP_D}
+};
+
+static struct lookup_int_table int_mask_tbl[4] = {
+ {NULL, ICOM_INT_MASK_PRC_A},
+ {NULL, ICOM_INT_MASK_PRC_B},
+ {NULL, ICOM_INT_MASK_PRC_C},
+ {NULL, ICOM_INT_MASK_PRC_D},
+};
+
+
+MODULE_DEVICE_TABLE(pci, icom_pci_table);
+
+static LIST_HEAD(icom_adapter_head);
+
+/* spinlock for adapter initialization and changing adapter operations */
+static DEFINE_SPINLOCK(icom_lock);
+
+#ifdef ICOM_TRACE
+static inline void trace(struct icom_port *icom_port, char *trace_pt,
+ unsigned long trace_data)
+{
+ dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
+ icom_port->port, trace_pt, trace_data);
+}
+#else
+static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
+#endif
+static void icom_kref_release(struct kref *kref);
+
+static void free_port_memory(struct icom_port *icom_port)
+{
+ struct pci_dev *dev = icom_port->adapter->pci_dev;
+
+ trace(icom_port, "RET_PORT_MEM", 0);
+ if (icom_port->recv_buf) {
+ dma_free_coherent(&dev->dev, 4096, icom_port->recv_buf,
+ icom_port->recv_buf_pci);
+ icom_port->recv_buf = NULL;
+ }
+ if (icom_port->xmit_buf) {
+ dma_free_coherent(&dev->dev, 4096, icom_port->xmit_buf,
+ icom_port->xmit_buf_pci);
+ icom_port->xmit_buf = NULL;
+ }
+ if (icom_port->statStg) {
+ dma_free_coherent(&dev->dev, 4096, icom_port->statStg,
+ icom_port->statStg_pci);
+ icom_port->statStg = NULL;
+ }
+
+ if (icom_port->xmitRestart) {
+ dma_free_coherent(&dev->dev, 4096, icom_port->xmitRestart,
+ icom_port->xmitRestart_pci);
+ icom_port->xmitRestart = NULL;
+ }
+}
+
+static int get_port_memory(struct icom_port *icom_port)
+{
+ int index;
+ unsigned long stgAddr;
+ unsigned long startStgAddr;
+ unsigned long offset;
+ struct pci_dev *dev = icom_port->adapter->pci_dev;
+
+ icom_port->xmit_buf =
+ dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmit_buf_pci,
+ GFP_KERNEL);
+ if (!icom_port->xmit_buf) {
+ dev_err(&dev->dev, "Can not allocate Transmit buffer\n");
+ return -ENOMEM;
+ }
+
+ trace(icom_port, "GET_PORT_MEM",
+ (unsigned long) icom_port->xmit_buf);
+
+ icom_port->recv_buf =
+ dma_alloc_coherent(&dev->dev, 4096, &icom_port->recv_buf_pci,
+ GFP_KERNEL);
+ if (!icom_port->recv_buf) {
+ dev_err(&dev->dev, "Can not allocate Receive buffer\n");
+ free_port_memory(icom_port);
+ return -ENOMEM;
+ }
+ trace(icom_port, "GET_PORT_MEM",
+ (unsigned long) icom_port->recv_buf);
+
+ icom_port->statStg =
+ dma_alloc_coherent(&dev->dev, 4096, &icom_port->statStg_pci,
+ GFP_KERNEL);
+ if (!icom_port->statStg) {
+ dev_err(&dev->dev, "Can not allocate Status buffer\n");
+ free_port_memory(icom_port);
+ return -ENOMEM;
+ }
+ trace(icom_port, "GET_PORT_MEM",
+ (unsigned long) icom_port->statStg);
+
+ icom_port->xmitRestart =
+ dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmitRestart_pci,
+ GFP_KERNEL);
+ if (!icom_port->xmitRestart) {
+ dev_err(&dev->dev,
+ "Can not allocate xmit Restart buffer\n");
+ free_port_memory(icom_port);
+ return -ENOMEM;
+ }
+
+ /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that
+ indicates that frames are to be transmitted
+ */
+
+ stgAddr = (unsigned long) icom_port->statStg;
+ for (index = 0; index < NUM_XBUFFS; index++) {
+ trace(icom_port, "FOD_ADDR", stgAddr);
+ stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]);
+ if (index < (NUM_XBUFFS - 1)) {
+ memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
+ icom_port->statStg->xmit[index].leLengthASD =
+ cpu_to_le16(XMIT_BUFF_SZ);
+ trace(icom_port, "FOD_ADDR", stgAddr);
+ trace(icom_port, "FOD_XBUFF",
+ (unsigned long) icom_port->xmit_buf);
+ icom_port->statStg->xmit[index].leBuffer =
+ cpu_to_le32(icom_port->xmit_buf_pci);
+ } else if (index == (NUM_XBUFFS - 1)) {
+ memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
+ icom_port->statStg->xmit[index].leLengthASD =
+ cpu_to_le16(XMIT_BUFF_SZ);
+ trace(icom_port, "FOD_XBUFF",
+ (unsigned long) icom_port->xmit_buf);
+ icom_port->statStg->xmit[index].leBuffer =
+ cpu_to_le32(icom_port->xmit_buf_pci);
+ } else {
+ memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
+ }
+ }
+ /* FIDs */
+ startStgAddr = stgAddr;
+
+ /* fill in every entry, even if no buffer */
+ for (index = 0; index < NUM_RBUFFS; index++) {
+ trace(icom_port, "FID_ADDR", stgAddr);
+ stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]);
+ icom_port->statStg->rcv[index].leLength = 0;
+ icom_port->statStg->rcv[index].WorkingLength =
+ cpu_to_le16(RCV_BUFF_SZ);
+ if (index < (NUM_RBUFFS - 1) ) {
+ offset = stgAddr - (unsigned long) icom_port->statStg;
+ icom_port->statStg->rcv[index].leNext =
+ cpu_to_le32(icom_port-> statStg_pci + offset);
+ trace(icom_port, "FID_RBUFF",
+ (unsigned long) icom_port->recv_buf);
+ icom_port->statStg->rcv[index].leBuffer =
+ cpu_to_le32(icom_port->recv_buf_pci);
+ } else if (index == (NUM_RBUFFS -1) ) {
+ offset = startStgAddr - (unsigned long) icom_port->statStg;
+ icom_port->statStg->rcv[index].leNext =
+ cpu_to_le32(icom_port-> statStg_pci + offset);
+ trace(icom_port, "FID_RBUFF",
+ (unsigned long) icom_port->recv_buf + 2048);
+ icom_port->statStg->rcv[index].leBuffer =
+ cpu_to_le32(icom_port->recv_buf_pci + 2048);
+ } else {
+ icom_port->statStg->rcv[index].leNext = 0;
+ icom_port->statStg->rcv[index].leBuffer = 0;
+ }
+ }
+
+ return 0;
+}
+
+static void stop_processor(struct icom_port *icom_port)
+{
+ unsigned long temp;
+ unsigned long flags;
+ int port;
+
+ spin_lock_irqsave(&icom_lock, flags);
+
+ port = icom_port->port;
+ if (port >= ARRAY_SIZE(stop_proc)) {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Invalid port assignment\n");
+ goto unlock;
+ }
+
+ if (port == 0 || port == 1)
+ stop_proc[port].global_control_reg = &icom_port->global_reg->control;
+ else
+ stop_proc[port].global_control_reg = &icom_port->global_reg->control_2;
+
+ temp = readl(stop_proc[port].global_control_reg);
+ temp = (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
+ writel(temp, stop_proc[port].global_control_reg);
+
+ /* write flush */
+ readl(stop_proc[port].global_control_reg);
+
+unlock:
+ spin_unlock_irqrestore(&icom_lock, flags);
+}
+
+static void start_processor(struct icom_port *icom_port)
+{
+ unsigned long temp;
+ unsigned long flags;
+ int port;
+
+ spin_lock_irqsave(&icom_lock, flags);
+
+ port = icom_port->port;
+ if (port >= ARRAY_SIZE(start_proc)) {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Invalid port assignment\n");
+ goto unlock;
+ }
+
+ if (port == 0 || port == 1)
+ start_proc[port].global_control_reg = &icom_port->global_reg->control;
+ else
+ start_proc[port].global_control_reg = &icom_port->global_reg->control_2;
+
+ temp = readl(start_proc[port].global_control_reg);
+ temp = (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
+ writel(temp, start_proc[port].global_control_reg);
+
+ /* write flush */
+ readl(start_proc[port].global_control_reg);
+
+unlock:
+ spin_unlock_irqrestore(&icom_lock, flags);
+}
+
+static void load_code(struct icom_port *icom_port)
+{
+ const struct firmware *fw;
+ char __iomem *iram_ptr;
+ int index;
+ int status = 0;
+ void __iomem *dram_ptr = icom_port->dram;
+ dma_addr_t temp_pci;
+ unsigned char *new_page = NULL;
+ unsigned char cable_id = NO_CABLE;
+ struct pci_dev *dev = icom_port->adapter->pci_dev;
+
+ /* Clear out any pending interrupts */
+ writew(0x3FFF, icom_port->int_reg);
+
+ trace(icom_port, "CLEAR_INTERRUPTS", 0);
+
+ /* Stop processor */
+ stop_processor(icom_port);
+
+ /* Zero out DRAM */
+ memset_io(dram_ptr, 0, 512);
+
+ /* Load Call Setup into Adapter */
+ if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) {
+ dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n");
+ status = -1;
+ goto load_code_exit;
+ }
+
+ if (fw->size > ICOM_DCE_IRAM_OFFSET) {
+ dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n");
+ release_firmware(fw);
+ status = -1;
+ goto load_code_exit;
+ }
+
+ iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET;
+ for (index = 0; index < fw->size; index++)
+ writeb(fw->data[index], &iram_ptr[index]);
+
+ release_firmware(fw);
+
+ /* Load Resident DCE portion of Adapter */
+ if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) {
+ dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n");
+ status = -1;
+ goto load_code_exit;
+ }
+
+ if (fw->size > ICOM_IRAM_SIZE) {
+ dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n");
+ release_firmware(fw);
+ status = -1;
+ goto load_code_exit;
+ }
+
+ iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET;
+ for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++)
+ writeb(fw->data[index], &iram_ptr[index]);
+
+ release_firmware(fw);
+
+ /* Set Hardware level */
+ if (icom_port->adapter->version == ADAPTER_V2)
+ writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));
+
+ /* Start the processor in Adapter */
+ start_processor(icom_port);
+
+ writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL),
+ &(icom_port->dram->HDLCConfigReg));
+ writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */
+ writeb(0x00, &(icom_port->dram->CmdReg));
+ writeb(0x10, &(icom_port->dram->async_config3));
+ writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC |
+ ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2));
+
+ /*Set up data in icom DRAM to indicate where personality
+ *code is located and its length.
+ */
+ new_page = dma_alloc_coherent(&dev->dev, 4096, &temp_pci, GFP_KERNEL);
+
+ if (!new_page) {
+ dev_err(&dev->dev, "Can not allocate DMA buffer\n");
+ status = -1;
+ goto load_code_exit;
+ }
+
+ if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) {
+ dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n");
+ status = -1;
+ goto load_code_exit;
+ }
+
+ if (fw->size > ICOM_DCE_IRAM_OFFSET) {
+ dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n");
+ release_firmware(fw);
+ status = -1;
+ goto load_code_exit;
+ }
+
+ for (index = 0; index < fw->size; index++)
+ new_page[index] = fw->data[index];
+
+ writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length);
+ writel(temp_pci, &icom_port->dram->mac_load_addr);
+
+ release_firmware(fw);
+
+ /*Setting the syncReg to 0x80 causes adapter to start downloading
+ the personality code into adapter instruction RAM.
+ Once code is loaded, it will begin executing and, based on
+ information provided above, will start DMAing data from
+ shared memory to adapter DRAM.
+ */
+ /* the wait loop below verifies this write operation has been done
+ and processed
+ */
+ writeb(START_DOWNLOAD, &icom_port->dram->sync);
+
+ /* Wait max 1 Sec for data download and processor to start */
+ for (index = 0; index < 10; index++) {
+ msleep(100);
+ if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE)
+ break;
+ }
+
+ if (index == 10)
+ status = -1;
+
+ /*
+ * check Cable ID
+ */
+ cable_id = readb(&icom_port->dram->cable_id);
+
+ if (cable_id & ICOM_CABLE_ID_VALID) {
+ /* Get cable ID into the lower 4 bits (standard form) */
+ cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4;
+ icom_port->cable_id = cable_id;
+ } else {
+ dev_err(&dev->dev,"Invalid or no cable attached\n");
+ icom_port->cable_id = NO_CABLE;
+ }
+
+ load_code_exit:
+
+ if (status != 0) {
+ /* Clear out any pending interrupts */
+ writew(0x3FFF, icom_port->int_reg);
+
+ /* Turn off port */
+ writeb(ICOM_DISABLE, &(icom_port->dram->disable));
+
+ /* Stop processor */
+ stop_processor(icom_port);
+
+ dev_err(&icom_port->adapter->pci_dev->dev,"Port not operational\n");
+ }
+
+ if (new_page != NULL)
+ dma_free_coherent(&dev->dev, 4096, new_page, temp_pci);
+}
+
+static int startup(struct icom_port *icom_port)
+{
+ unsigned long temp;
+ unsigned char cable_id, raw_cable_id;
+ unsigned long flags;
+ int port;
+
+ trace(icom_port, "STARTUP", 0);
+
+ if (!icom_port->dram) {
+ /* should NEVER be NULL */
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Unusable Port, port configuration missing\n");
+ return -ENODEV;
+ }
+
+ /*
+ * check Cable ID
+ */
+ raw_cable_id = readb(&icom_port->dram->cable_id);
+ trace(icom_port, "CABLE_ID", raw_cable_id);
+
+ /* Get cable ID into the lower 4 bits (standard form) */
+ cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4;
+
+ /* Check for valid Cable ID */
+ if (!(raw_cable_id & ICOM_CABLE_ID_VALID) ||
+ (cable_id != icom_port->cable_id)) {
+
+ /* reload adapter code, pick up any potential changes in cable id */
+ load_code(icom_port);
+
+ /* still no sign of cable, error out */
+ raw_cable_id = readb(&icom_port->dram->cable_id);
+ cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4;
+ if (!(raw_cable_id & ICOM_CABLE_ID_VALID) ||
+ (icom_port->cable_id == NO_CABLE))
+ return -EIO;
+ }
+
+ /*
+ * Finally, clear and enable interrupts
+ */
+ spin_lock_irqsave(&icom_lock, flags);
+ port = icom_port->port;
+ if (port >= ARRAY_SIZE(int_mask_tbl)) {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Invalid port assignment\n");
+ goto unlock;
+ }
+
+ if (port == 0 || port == 1)
+ int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask;
+ else
+ int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2;
+
+ if (port == 0 || port == 2)
+ writew(0x00FF, icom_port->int_reg);
+ else
+ writew(0x3F00, icom_port->int_reg);
+
+ temp = readl(int_mask_tbl[port].global_int_mask);
+ writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask);
+
+ /* write flush */
+ readl(int_mask_tbl[port].global_int_mask);
+
+unlock:
+ spin_unlock_irqrestore(&icom_lock, flags);
+ return 0;
+}
+
+static void shutdown(struct icom_port *icom_port)
+{
+ unsigned long temp;
+ unsigned char cmdReg;
+ unsigned long flags;
+ int port;
+
+ spin_lock_irqsave(&icom_lock, flags);
+ trace(icom_port, "SHUTDOWN", 0);
+
+ /*
+ * disable all interrupts
+ */
+ port = icom_port->port;
+ if (port >= ARRAY_SIZE(int_mask_tbl)) {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Invalid port assignment\n");
+ goto unlock;
+ }
+ if (port == 0 || port == 1)
+ int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask;
+ else
+ int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2;
+
+ temp = readl(int_mask_tbl[port].global_int_mask);
+ writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask);
+
+ /* write flush */
+ readl(int_mask_tbl[port].global_int_mask);
+
+unlock:
+ spin_unlock_irqrestore(&icom_lock, flags);
+
+ /*
+ * disable break condition
+ */
+ cmdReg = readb(&icom_port->dram->CmdReg);
+ if (cmdReg & CMD_SND_BREAK) {
+ writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
+ }
+}
+
+static int icom_write(struct uart_port *port)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ unsigned long data_count;
+ unsigned char cmdReg;
+ unsigned long offset;
+ int temp_tail = port->state->xmit.tail;
+
+ trace(icom_port, "WRITE", 0);
+
+ if (le16_to_cpu(icom_port->statStg->xmit[0].flags) &
+ SA_FLAGS_READY_TO_XMIT) {
+ trace(icom_port, "WRITE_FULL", 0);
+ return 0;
+ }
+
+ data_count = 0;
+ while ((port->state->xmit.head != temp_tail) &&
+ (data_count <= XMIT_BUFF_SZ)) {
+
+ icom_port->xmit_buf[data_count++] =
+ port->state->xmit.buf[temp_tail];
+
+ temp_tail++;
+ temp_tail &= (UART_XMIT_SIZE - 1);
+ }
+
+ if (data_count) {
+ icom_port->statStg->xmit[0].flags =
+ cpu_to_le16(SA_FLAGS_READY_TO_XMIT);
+ icom_port->statStg->xmit[0].leLength =
+ cpu_to_le16(data_count);
+ offset =
+ (unsigned long) &icom_port->statStg->xmit[0] -
+ (unsigned long) icom_port->statStg;
+ *icom_port->xmitRestart =
+ cpu_to_le32(icom_port->statStg_pci + offset);
+ cmdReg = readb(&icom_port->dram->CmdReg);
+ writeb(cmdReg | CMD_XMIT_RCV_ENABLE,
+ &icom_port->dram->CmdReg);
+ writeb(START_XMIT, &icom_port->dram->StartXmitCmd);
+ trace(icom_port, "WRITE_START", data_count);
+ /* write flush */
+ readb(&icom_port->dram->StartXmitCmd);
+ }
+
+ return data_count;
+}
+
+static inline void check_modem_status(struct icom_port *icom_port)
+{
+ static char old_status = 0;
+ char delta_status;
+ unsigned char status;
+
+ spin_lock(&icom_port->uart_port.lock);
+
+ /*modem input register */
+ status = readb(&icom_port->dram->isr);
+ trace(icom_port, "CHECK_MODEM", status);
+ delta_status = status ^ old_status;
+ if (delta_status) {
+ if (delta_status & ICOM_RI)
+ icom_port->uart_port.icount.rng++;
+ if (delta_status & ICOM_DSR)
+ icom_port->uart_port.icount.dsr++;
+ if (delta_status & ICOM_DCD)
+ uart_handle_dcd_change(&icom_port->uart_port,
+ delta_status & ICOM_DCD);
+ if (delta_status & ICOM_CTS)
+ uart_handle_cts_change(&icom_port->uart_port,
+ delta_status & ICOM_CTS);
+
+ wake_up_interruptible(&icom_port->uart_port.state->
+ port.delta_msr_wait);
+ old_status = status;
+ }
+ spin_unlock(&icom_port->uart_port.lock);
+}
+
+static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
+{
+ u16 count, i;
+
+ if (port_int_reg & (INT_XMIT_COMPLETED)) {
+ trace(icom_port, "XMIT_COMPLETE", 0);
+
+ /* clear buffer in use bit */
+ icom_port->statStg->xmit[0].flags &=
+ cpu_to_le16(~SA_FLAGS_READY_TO_XMIT);
+
+ count = le16_to_cpu(icom_port->statStg->xmit[0].leLength);
+ icom_port->uart_port.icount.tx += count;
+
+ for (i=0; i<count &&
+ !uart_circ_empty(&icom_port->uart_port.state->xmit); i++) {
+
+ icom_port->uart_port.state->xmit.tail++;
+ icom_port->uart_port.state->xmit.tail &=
+ (UART_XMIT_SIZE - 1);
+ }
+
+ if (!icom_write(&icom_port->uart_port))
+ /* activate write queue */
+ uart_write_wakeup(&icom_port->uart_port);
+ } else
+ trace(icom_port, "XMIT_DISABLED", 0);
+}
+
+static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
+{
+ short int count, rcv_buff;
+ struct tty_port *port = &icom_port->uart_port.state->port;
+ u16 status;
+ struct uart_icount *icount;
+ unsigned long offset;
+ unsigned char flag;
+
+ trace(icom_port, "RCV_COMPLETE", 0);
+ rcv_buff = icom_port->next_rcv;
+
+ status = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].flags);
+ while (status & SA_FL_RCV_DONE) {
+ int first = -1;
+
+ trace(icom_port, "FID_STATUS", status);
+ count = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].leLength);
+
+ trace(icom_port, "RCV_COUNT", count);
+
+ trace(icom_port, "REAL_COUNT", count);
+
+ offset = le32_to_cpu(icom_port->statStg->rcv[rcv_buff].leBuffer) -
+ icom_port->recv_buf_pci;
+
+ /* Block copy all but the last byte as this may have status */
+ if (count > 0) {
+ first = icom_port->recv_buf[offset];
+ tty_insert_flip_string(port, icom_port->recv_buf + offset, count - 1);
+ }
+
+ icount = &icom_port->uart_port.icount;
+ icount->rx += count;
+
+ /* Break detect logic */
+ if ((status & SA_FLAGS_FRAME_ERROR)
+ && first == 0) {
+ status &= ~SA_FLAGS_FRAME_ERROR;
+ status |= SA_FLAGS_BREAK_DET;
+ trace(icom_port, "BREAK_DET", 0);
+ }
+
+ flag = TTY_NORMAL;
+
+ if (status &
+ (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR |
+ SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) {
+
+ if (status & SA_FLAGS_BREAK_DET)
+ icount->brk++;
+ if (status & SA_FLAGS_PARITY_ERROR)
+ icount->parity++;
+ if (status & SA_FLAGS_FRAME_ERROR)
+ icount->frame++;
+ if (status & SA_FLAGS_OVERRUN)
+ icount->overrun++;
+
+ /*
+ * Now check to see if character should be
+ * ignored, and mask off conditions which
+ * should be ignored.
+ */
+ if (status & icom_port->ignore_status_mask) {
+ trace(icom_port, "IGNORE_CHAR", 0);
+ goto ignore_char;
+ }
+
+ status &= icom_port->read_status_mask;
+
+ if (status & SA_FLAGS_BREAK_DET) {
+ flag = TTY_BREAK;
+ } else if (status & SA_FLAGS_PARITY_ERROR) {
+ trace(icom_port, "PARITY_ERROR", 0);
+ flag = TTY_PARITY;
+ } else if (status & SA_FLAGS_FRAME_ERROR)
+ flag = TTY_FRAME;
+
+ }
+
+ tty_insert_flip_char(port, *(icom_port->recv_buf + offset + count - 1), flag);
+
+ if (status & SA_FLAGS_OVERRUN)
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ tty_insert_flip_char(port, 0, TTY_OVERRUN);
+ignore_char:
+ icom_port->statStg->rcv[rcv_buff].flags = 0;
+ icom_port->statStg->rcv[rcv_buff].leLength = 0;
+ icom_port->statStg->rcv[rcv_buff].WorkingLength =
+ cpu_to_le16(RCV_BUFF_SZ);
+
+ rcv_buff++;
+ if (rcv_buff == NUM_RBUFFS)
+ rcv_buff = 0;
+
+ status = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].flags);
+ }
+ icom_port->next_rcv = rcv_buff;
+
+ tty_flip_buffer_push(port);
+}
+
+static void process_interrupt(u16 port_int_reg,
+ struct icom_port *icom_port)
+{
+
+ spin_lock(&icom_port->uart_port.lock);
+ trace(icom_port, "INTERRUPT", port_int_reg);
+
+ if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED))
+ xmit_interrupt(port_int_reg, icom_port);
+
+ if (port_int_reg & INT_RCV_COMPLETED)
+ recv_interrupt(port_int_reg, icom_port);
+
+ spin_unlock(&icom_port->uart_port.lock);
+}
+
+static irqreturn_t icom_interrupt(int irq, void *dev_id)
+{
+ void __iomem * int_reg;
+ u32 adapter_interrupts;
+ u16 port_int_reg;
+ struct icom_adapter *icom_adapter;
+ struct icom_port *icom_port;
+
+ /* find icom_port for this interrupt */
+ icom_adapter = (struct icom_adapter *) dev_id;
+
+ if (icom_adapter->version == ADAPTER_V2) {
+ int_reg = icom_adapter->base_addr + 0x8024;
+
+ adapter_interrupts = readl(int_reg);
+
+ if (adapter_interrupts & 0x00003FFF) {
+ /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */
+ icom_port = &icom_adapter->port_info[2];
+ port_int_reg = (u16) adapter_interrupts;
+ process_interrupt(port_int_reg, icom_port);
+ check_modem_status(icom_port);
+ }
+ if (adapter_interrupts & 0x3FFF0000) {
+ /* port 3 interrupt */
+ icom_port = &icom_adapter->port_info[3];
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ port_int_reg =
+ (u16) (adapter_interrupts >> 16);
+ process_interrupt(port_int_reg, icom_port);
+ check_modem_status(icom_port);
+ }
+ }
+
+ /* Clear out any pending interrupts */
+ writel(adapter_interrupts, int_reg);
+
+ int_reg = icom_adapter->base_addr + 0x8004;
+ } else {
+ int_reg = icom_adapter->base_addr + 0x4004;
+ }
+
+ adapter_interrupts = readl(int_reg);
+
+ if (adapter_interrupts & 0x00003FFF) {
+ /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */
+ icom_port = &icom_adapter->port_info[0];
+ port_int_reg = (u16) adapter_interrupts;
+ process_interrupt(port_int_reg, icom_port);
+ check_modem_status(icom_port);
+ }
+ if (adapter_interrupts & 0x3FFF0000) {
+ /* port 1 interrupt */
+ icom_port = &icom_adapter->port_info[1];
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ port_int_reg = (u16) (adapter_interrupts >> 16);
+ process_interrupt(port_int_reg, icom_port);
+ check_modem_status(icom_port);
+ }
+ }
+
+ /* Clear out any pending interrupts */
+ writel(adapter_interrupts, int_reg);
+
+ /* flush the write */
+ adapter_interrupts = readl(int_reg);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * ------------------------------------------------------------------
+ * Begin serial-core API
+ * ------------------------------------------------------------------
+ */
+static unsigned int icom_tx_empty(struct uart_port *port)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (le16_to_cpu(icom_port->statStg->xmit[0].flags) &
+ SA_FLAGS_READY_TO_XMIT)
+ ret = TIOCSER_TEMT;
+ else
+ ret = 0;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ return ret;
+}
+
+static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ unsigned char local_osr;
+
+ trace(icom_port, "SET_MODEM", 0);
+ local_osr = readb(&icom_port->dram->osr);
+
+ if (mctrl & TIOCM_RTS) {
+ trace(icom_port, "RAISE_RTS", 0);
+ local_osr |= ICOM_RTS;
+ } else {
+ trace(icom_port, "LOWER_RTS", 0);
+ local_osr &= ~ICOM_RTS;
+ }
+
+ if (mctrl & TIOCM_DTR) {
+ trace(icom_port, "RAISE_DTR", 0);
+ local_osr |= ICOM_DTR;
+ } else {
+ trace(icom_port, "LOWER_DTR", 0);
+ local_osr &= ~ICOM_DTR;
+ }
+
+ writeb(local_osr, &icom_port->dram->osr);
+}
+
+static unsigned int icom_get_mctrl(struct uart_port *port)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ unsigned char status;
+ unsigned int result;
+
+ trace(icom_port, "GET_MODEM", 0);
+
+ status = readb(&icom_port->dram->isr);
+
+ result = ((status & ICOM_DCD) ? TIOCM_CAR : 0)
+ | ((status & ICOM_RI) ? TIOCM_RNG : 0)
+ | ((status & ICOM_DSR) ? TIOCM_DSR : 0)
+ | ((status & ICOM_CTS) ? TIOCM_CTS : 0);
+ return result;
+}
+
+static void icom_stop_tx(struct uart_port *port)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ unsigned char cmdReg;
+
+ trace(icom_port, "STOP", 0);
+ cmdReg = readb(&icom_port->dram->CmdReg);
+ writeb(cmdReg | CMD_HOLD_XMIT, &icom_port->dram->CmdReg);
+}
+
+static void icom_start_tx(struct uart_port *port)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ unsigned char cmdReg;
+
+ trace(icom_port, "START", 0);
+ cmdReg = readb(&icom_port->dram->CmdReg);
+ if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT)
+ writeb(cmdReg & ~CMD_HOLD_XMIT,
+ &icom_port->dram->CmdReg);
+
+ icom_write(port);
+}
+
+static void icom_send_xchar(struct uart_port *port, char ch)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ unsigned char xdata;
+ int index;
+ unsigned long flags;
+
+ trace(icom_port, "SEND_XCHAR", ch);
+
+ /* wait .1 sec to send char */
+ for (index = 0; index < 10; index++) {
+ spin_lock_irqsave(&port->lock, flags);
+ xdata = readb(&icom_port->dram->xchar);
+ if (xdata == 0x00) {
+ trace(icom_port, "QUICK_WRITE", 0);
+ writeb(ch, &icom_port->dram->xchar);
+
+ /* flush write operation */
+ xdata = readb(&icom_port->dram->xchar);
+ spin_unlock_irqrestore(&port->lock, flags);
+ break;
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+ msleep(10);
+ }
+}
+
+static void icom_stop_rx(struct uart_port *port)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ unsigned char cmdReg;
+
+ cmdReg = readb(&icom_port->dram->CmdReg);
+ writeb(cmdReg & ~CMD_RCV_ENABLE, &icom_port->dram->CmdReg);
+}
+
+static void icom_break(struct uart_port *port, int break_state)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ unsigned char cmdReg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ trace(icom_port, "BREAK", 0);
+ cmdReg = readb(&icom_port->dram->CmdReg);
+ if (break_state == -1) {
+ writeb(cmdReg | CMD_SND_BREAK, &icom_port->dram->CmdReg);
+ } else {
+ writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int icom_open(struct uart_port *port)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ int retval;
+
+ kref_get(&icom_port->adapter->kref);
+ retval = startup(icom_port);
+
+ if (retval) {
+ kref_put(&icom_port->adapter->kref, icom_kref_release);
+ trace(icom_port, "STARTUP_ERROR", 0);
+ return retval;
+ }
+
+ return 0;
+}
+
+static void icom_close(struct uart_port *port)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ unsigned char cmdReg;
+
+ trace(icom_port, "CLOSE", 0);
+
+ /* stop receiver */
+ cmdReg = readb(&icom_port->dram->CmdReg);
+ writeb(cmdReg & ~CMD_RCV_ENABLE, &icom_port->dram->CmdReg);
+
+ shutdown(icom_port);
+
+ kref_put(&icom_port->adapter->kref, icom_kref_release);
+}
+
+static void icom_set_termios(struct uart_port *port, struct ktermios *termios,
+ const struct ktermios *old_termios)
+{
+ struct icom_port *icom_port = to_icom_port(port);
+ int baud;
+ unsigned cflag, iflag;
+ char new_config2;
+ char new_config3 = 0;
+ char tmp_byte;
+ int index;
+ int rcv_buff, xmit_buff;
+ unsigned long offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ trace(icom_port, "CHANGE_SPEED", 0);
+
+ cflag = termios->c_cflag;
+ iflag = termios->c_iflag;
+
+ new_config2 = ICOM_ACFG_DRIVE1;
+
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5: /* 5 bits/char */
+ new_config2 |= ICOM_ACFG_5BPC;
+ break;
+ case CS6: /* 6 bits/char */
+ new_config2 |= ICOM_ACFG_6BPC;
+ break;
+ case CS7: /* 7 bits/char */
+ new_config2 |= ICOM_ACFG_7BPC;
+ break;
+ case CS8: /* 8 bits/char */
+ new_config2 |= ICOM_ACFG_8BPC;
+ break;
+ default:
+ break;
+ }
+ if (cflag & CSTOPB) {
+ /* 2 stop bits */
+ new_config2 |= ICOM_ACFG_2STOP_BIT;
+ }
+ if (cflag & PARENB) {
+ /* parity bit enabled */
+ new_config2 |= ICOM_ACFG_PARITY_ENAB;
+ trace(icom_port, "PARENB", 0);
+ }
+ if (cflag & PARODD) {
+ /* odd parity */
+ new_config2 |= ICOM_ACFG_PARITY_ODD;
+ trace(icom_port, "PARODD", 0);
+ }
+
+ /* Determine divisor based on baud rate */
+ baud = uart_get_baud_rate(port, termios, old_termios,
+ icom_acfg_baud[0],
+ icom_acfg_baud[BAUD_TABLE_LIMIT]);
+ if (!baud)
+ baud = 9600; /* B0 transition handled in rs_set_termios */
+
+ for (index = 0; index < BAUD_TABLE_LIMIT; index++) {
+ if (icom_acfg_baud[index] == baud) {
+ new_config3 = index;
+ break;
+ }
+ }
+
+ uart_update_timeout(port, cflag, baud);
+
+ /* CTS flow control flag and modem status interrupts */
+ tmp_byte = readb(&(icom_port->dram->HDLCConfigReg));
+ if (cflag & CRTSCTS)
+ tmp_byte |= HDLC_HDW_FLOW;
+ else
+ tmp_byte &= ~HDLC_HDW_FLOW;
+ writeb(tmp_byte, &(icom_port->dram->HDLCConfigReg));
+
+ /*
+ * Set up parity check flag
+ */
+ icom_port->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE;
+ if (iflag & INPCK)
+ icom_port->read_status_mask |=
+ SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR;
+
+ if ((iflag & BRKINT) || (iflag & PARMRK))
+ icom_port->read_status_mask |= SA_FLAGS_BREAK_DET;
+
+ /*
+ * Characters to ignore
+ */
+ icom_port->ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ icom_port->ignore_status_mask |=
+ SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR;
+ if (iflag & IGNBRK) {
+ icom_port->ignore_status_mask |= SA_FLAGS_BREAK_DET;
+ /*
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (iflag & IGNPAR)
+ icom_port->ignore_status_mask |= SA_FLAGS_OVERRUN;
+ }
+
+ /*
+ * !!! ignore all characters if CREAD is not set
+ */
+ if ((cflag & CREAD) == 0)
+ icom_port->ignore_status_mask |= SA_FL_RCV_DONE;
+
+ /* Turn off Receiver to prepare for reset */
+ writeb(CMD_RCV_DISABLE, &icom_port->dram->CmdReg);
+
+ for (index = 0; index < 10; index++) {
+ if (readb(&icom_port->dram->PrevCmdReg) == 0x00) {
+ break;
+ }
+ }
+
+ /* clear all current buffers of data */
+ for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) {
+ icom_port->statStg->rcv[rcv_buff].flags = 0;
+ icom_port->statStg->rcv[rcv_buff].leLength = 0;
+ icom_port->statStg->rcv[rcv_buff].WorkingLength =
+ cpu_to_le16(RCV_BUFF_SZ);
+ }
+
+ for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) {
+ icom_port->statStg->xmit[xmit_buff].flags = 0;
+ }
+
+ /* activate changes and start xmit and receiver here */
+ /* Enable the receiver */
+ writeb(new_config3, &(icom_port->dram->async_config3));
+ writeb(new_config2, &(icom_port->dram->async_config2));
+ tmp_byte = readb(&(icom_port->dram->HDLCConfigReg));
+ tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL;
+ writeb(tmp_byte, &(icom_port->dram->HDLCConfigReg));
+ writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */
+ writeb(0xFF, &(icom_port->dram->ier)); /* enable modem signal interrupts */
+
+ /* reset processor */
+ writeb(CMD_RESTART, &icom_port->dram->CmdReg);
+
+ for (index = 0; index < 10; index++) {
+ if (readb(&icom_port->dram->CmdReg) == 0x00) {
+ break;
+ }
+ }
+
+ /* Enable Transmitter and Receiver */
+ offset =
+ (unsigned long) &icom_port->statStg->rcv[0] -
+ (unsigned long) icom_port->statStg;
+ writel(icom_port->statStg_pci + offset,
+ &icom_port->dram->RcvStatusAddr);
+ icom_port->next_rcv = 0;
+ *icom_port->xmitRestart = 0;
+ writel(icom_port->xmitRestart_pci,
+ &icom_port->dram->XmitStatusAddr);
+ trace(icom_port, "XR_ENAB", 0);
+ writeb(CMD_XMIT_RCV_ENABLE, &icom_port->dram->CmdReg);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *icom_type(struct uart_port *port)
+{
+ return "icom";
+}
+
+static void icom_config_port(struct uart_port *port, int flags)
+{
+ port->type = PORT_ICOM;
+}
+
+static const struct uart_ops icom_ops = {
+ .tx_empty = icom_tx_empty,
+ .set_mctrl = icom_set_mctrl,
+ .get_mctrl = icom_get_mctrl,
+ .stop_tx = icom_stop_tx,
+ .start_tx = icom_start_tx,
+ .send_xchar = icom_send_xchar,
+ .stop_rx = icom_stop_rx,
+ .break_ctl = icom_break,
+ .startup = icom_open,
+ .shutdown = icom_close,
+ .set_termios = icom_set_termios,
+ .type = icom_type,
+ .config_port = icom_config_port,
+};
+
+#define ICOM_CONSOLE NULL
+
+static struct uart_driver icom_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = ICOM_DRIVER_NAME,
+ .dev_name = "ttyA",
+ .major = ICOM_MAJOR,
+ .minor = ICOM_MINOR_START,
+ .nr = NR_PORTS,
+ .cons = ICOM_CONSOLE,
+};
+
+static int icom_init_ports(struct icom_adapter *icom_adapter)
+{
+ u32 subsystem_id = icom_adapter->subsystem_id;
+ int i;
+ struct icom_port *icom_port;
+
+ if (icom_adapter->version == ADAPTER_V1) {
+ icom_adapter->numb_ports = 2;
+
+ for (i = 0; i < 2; i++) {
+ icom_port = &icom_adapter->port_info[i];
+ icom_port->port = i;
+ icom_port->status = ICOM_PORT_ACTIVE;
+ }
+ } else {
+ if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) {
+ icom_adapter->numb_ports = 4;
+
+ for (i = 0; i < 4; i++) {
+ icom_port = &icom_adapter->port_info[i];
+
+ icom_port->port = i;
+ icom_port->status = ICOM_PORT_ACTIVE;
+ }
+ } else {
+ icom_adapter->numb_ports = 4;
+
+ icom_adapter->port_info[0].port = 0;
+ icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE;
+ icom_adapter->port_info[1].status = ICOM_PORT_OFF;
+ icom_adapter->port_info[2].port = 2;
+ icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE;
+ icom_adapter->port_info[3].status = ICOM_PORT_OFF;
+ }
+ }
+
+ return 0;
+}
+
+static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num)
+{
+ if (icom_adapter->version == ADAPTER_V1) {
+ icom_port->global_reg = icom_adapter->base_addr + 0x4000;
+ icom_port->int_reg = icom_adapter->base_addr +
+ 0x4004 + 2 - 2 * port_num;
+ } else {
+ icom_port->global_reg = icom_adapter->base_addr + 0x8000;
+ if (icom_port->port < 2)
+ icom_port->int_reg = icom_adapter->base_addr +
+ 0x8004 + 2 - 2 * icom_port->port;
+ else
+ icom_port->int_reg = icom_adapter->base_addr +
+ 0x8024 + 2 - 2 * (icom_port->port - 2);
+ }
+}
+static int icom_load_ports(struct icom_adapter *icom_adapter)
+{
+ struct icom_port *icom_port;
+ int port_num;
+
+ for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) {
+
+ icom_port = &icom_adapter->port_info[port_num];
+
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ icom_port_active(icom_port, icom_adapter, port_num);
+ icom_port->dram = icom_adapter->base_addr +
+ 0x2000 * icom_port->port;
+
+ icom_port->adapter = icom_adapter;
+
+ /* get port memory */
+ if (get_port_memory(icom_port) != 0) {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Memory allocation for port FAILED\n");
+ }
+ }
+ }
+ return 0;
+}
+
+static int icom_alloc_adapter(struct icom_adapter
+ **icom_adapter_ref)
+{
+ int adapter_count = 0;
+ struct icom_adapter *icom_adapter;
+ struct icom_adapter *cur_adapter_entry;
+
+ icom_adapter = kzalloc(sizeof(struct icom_adapter), GFP_KERNEL);
+
+ if (!icom_adapter) {
+ return -ENOMEM;
+ }
+
+ list_for_each_entry(cur_adapter_entry, &icom_adapter_head,
+ icom_adapter_entry) {
+ if (cur_adapter_entry->index != adapter_count) {
+ break;
+ }
+ adapter_count++;
+ }
+
+ icom_adapter->index = adapter_count;
+ list_add_tail(&icom_adapter->icom_adapter_entry,
+ &cur_adapter_entry->icom_adapter_entry);
+
+ *icom_adapter_ref = icom_adapter;
+ return 0;
+}
+
+static void icom_free_adapter(struct icom_adapter *icom_adapter)
+{
+ list_del(&icom_adapter->icom_adapter_entry);
+ kfree(icom_adapter);
+}
+
+static void icom_kref_release(struct kref *kref)
+{
+ struct icom_adapter *icom_adapter = container_of(kref,
+ struct icom_adapter, kref);
+ struct icom_port *icom_port;
+ int index;
+
+ for (index = 0; index < icom_adapter->numb_ports; index++) {
+ icom_port = &icom_adapter->port_info[index];
+
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ dev_info(&icom_adapter->pci_dev->dev,
+ "Device removed\n");
+
+ uart_remove_one_port(&icom_uart_driver,
+ &icom_port->uart_port);
+
+ /* be sure that DTR and RTS are dropped */
+ writeb(0x00, &icom_port->dram->osr);
+
+ /* Wait 0.1 Sec for simple Init to complete */
+ msleep(100);
+
+ /* Stop proccessor */
+ stop_processor(icom_port);
+
+ free_port_memory(icom_port);
+ }
+ }
+
+ free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
+ iounmap(icom_adapter->base_addr);
+ pci_release_regions(icom_adapter->pci_dev);
+ icom_free_adapter(icom_adapter);
+}
+
+static int icom_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ int index;
+ unsigned int command_reg;
+ int retval;
+ struct icom_adapter *icom_adapter;
+ struct icom_port *icom_port;
+
+ retval = pci_enable_device(dev);
+ if (retval) {
+ dev_err(&dev->dev, "Device enable FAILED\n");
+ return retval;
+ }
+
+ retval = pci_request_regions(dev, "icom");
+ if (retval) {
+ dev_err(&dev->dev, "pci_request_regions FAILED\n");
+ pci_disable_device(dev);
+ return retval;
+ }
+
+ pci_set_master(dev);
+
+ retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg);
+ if (retval) {
+ dev_err(&dev->dev, "PCI Config read FAILED\n");
+ goto probe_exit0;
+ }
+
+ pci_write_config_dword(dev, PCI_COMMAND,
+ command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+
+ if (ent->driver_data == ADAPTER_V1) {
+ pci_write_config_dword(dev, 0x44, 0x8300830A);
+ } else {
+ pci_write_config_dword(dev, 0x44, 0x42004200);
+ pci_write_config_dword(dev, 0x48, 0x42004200);
+ }
+
+
+ retval = icom_alloc_adapter(&icom_adapter);
+ if (retval) {
+ dev_err(&dev->dev, "icom_alloc_adapter FAILED\n");
+ retval = -EIO;
+ goto probe_exit0;
+ }
+
+ icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
+ icom_adapter->pci_dev = dev;
+ icom_adapter->version = ent->driver_data;
+ icom_adapter->subsystem_id = ent->subdevice;
+
+
+ retval = icom_init_ports(icom_adapter);
+ if (retval) {
+ dev_err(&dev->dev, "Port configuration failed\n");
+ goto probe_exit1;
+ }
+
+ icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
+
+ if (!icom_adapter->base_addr) {
+ retval = -ENOMEM;
+ goto probe_exit1;
+ }
+
+ /* save off irq and request irq line */
+ retval = request_irq(dev->irq, icom_interrupt, IRQF_SHARED, ICOM_DRIVER_NAME, (void *)icom_adapter);
+ if (retval) {
+ goto probe_exit2;
+ }
+
+ retval = icom_load_ports(icom_adapter);
+
+ for (index = 0; index < icom_adapter->numb_ports; index++) {
+ icom_port = &icom_adapter->port_info[index];
+
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq;
+ icom_port->uart_port.type = PORT_ICOM;
+ icom_port->uart_port.iotype = UPIO_MEM;
+ icom_port->uart_port.membase =
+ (unsigned char __iomem *)icom_adapter->base_addr_pci;
+ icom_port->uart_port.fifosize = 16;
+ icom_port->uart_port.ops = &icom_ops;
+ icom_port->uart_port.line =
+ icom_port->port + icom_adapter->index * 4;
+ if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) {
+ icom_port->status = ICOM_PORT_OFF;
+ dev_err(&dev->dev, "Device add failed\n");
+ } else
+ dev_info(&dev->dev, "Device added\n");
+ }
+ }
+
+ kref_init(&icom_adapter->kref);
+ return 0;
+
+probe_exit2:
+ iounmap(icom_adapter->base_addr);
+probe_exit1:
+ icom_free_adapter(icom_adapter);
+
+probe_exit0:
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+
+ return retval;
+}
+
+static void icom_remove(struct pci_dev *dev)
+{
+ struct icom_adapter *icom_adapter;
+
+ list_for_each_entry(icom_adapter, &icom_adapter_head,
+ icom_adapter_entry) {
+ if (icom_adapter->pci_dev == dev) {
+ kref_put(&icom_adapter->kref, icom_kref_release);
+ return;
+ }
+ }
+
+ dev_err(&dev->dev, "Unable to find device to remove\n");
+}
+
+static struct pci_driver icom_pci_driver = {
+ .name = ICOM_DRIVER_NAME,
+ .id_table = icom_pci_table,
+ .probe = icom_probe,
+ .remove = icom_remove,
+};
+
+static int __init icom_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&icom_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = pci_register_driver(&icom_pci_driver);
+
+ if (ret < 0)
+ uart_unregister_driver(&icom_uart_driver);
+
+ return ret;
+}
+
+static void __exit icom_exit(void)
+{
+ pci_unregister_driver(&icom_pci_driver);
+ uart_unregister_driver(&icom_uart_driver);
+}
+
+module_init(icom_init);
+module_exit(icom_exit);
+
+MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
+MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("icom_call_setup.bin");
+MODULE_FIRMWARE("icom_res_dce.bin");
+MODULE_FIRMWARE("icom_asc.bin");