summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh')
-rwxr-xr-xtools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh419
1 files changed, 419 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh
new file mode 100755
index 000000000..6a3002fbc
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh
@@ -0,0 +1,419 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test injects a 10-MB burst of traffic with VLAN tag and 802.1p priority
+# of 1. This stream is consistently prioritized as priority 1, is put to PG
+# buffer 1, and scheduled at TC 1.
+#
+# - the stream first ingresses through $swp1, where it is forwarded to $swp3
+#
+# - then it ingresses through $swp4. Here it is put to a lossless buffer and put
+# to a small pool ("PFC pool"). The traffic is forwarded to $swp2, which is
+# shaped, and thus the PFC pool eventually fills, therefore the headroom
+# fills, and $swp3 is paused.
+#
+# - since $swp3 now can't send traffic, the traffic ingressing $swp1 is kept at
+# a pool ("overflow pool"). The overflow pool needs to be large enough to
+# contain the whole burst.
+#
+# - eventually the PFC pool gets some traffic out, headroom therefore gets some
+# traffic to the pool, and $swp3 is unpaused again. This way the traffic is
+# gradually forwarded from the overflow pool, through the PFC pool, out of
+# $swp2, and eventually to $h2.
+#
+# - if PFC works, all lossless flow packets that ingress through $swp1 should
+# also be seen ingressing $h2. If it doesn't, there will be drops due to
+# discrepancy between the speeds of $swp1 and $h2.
+#
+# - it should all play out relatively quickly, so that SLL and HLL will not
+# cause drops.
+#
+# +-----------------------+
+# | H1 |
+# | + $h1.111 |
+# | | 192.0.2.33/28 |
+# | | |
+# | + $h1 |
+# +---|-------------------+ +--------------------+
+# | | |
+# +---|----------------------|--------------------|---------------------------+
+# | + $swp1 $swp3 + + $swp4 |
+# | | iPOOL1 iPOOL0 | | iPOOL2 |
+# | | ePOOL4 ePOOL5 | | ePOOL4 |
+# | | 1Gbps | | 1Gbps |
+# | | PFC:enabled=1 | | PFC:enabled=1 |
+# | +-|----------------------|-+ +-|------------------------+ |
+# | | + $swp1.111 $swp3.111 + | | + $swp4.111 | |
+# | | | | | |
+# | | BR1 | | BR2 | |
+# | | | | | |
+# | | | | + $swp2.111 | |
+# | +--------------------------+ +---------|----------------+ |
+# | | |
+# | iPOOL0: 500KB dynamic | |
+# | iPOOL1: 10MB static | |
+# | iPOOL2: 1MB static + $swp2 |
+# | ePOOL4: 500KB dynamic | iPOOL0 |
+# | ePOOL5: 10MB static | ePOOL6 |
+# | ePOOL6: "infinite" static | 200Mbps shaper |
+# +-------------------------------------------------------|-------------------+
+# |
+# +---|-------------------+
+# | + $h2 H2 |
+# | | |
+# | + $h2.111 |
+# | 192.0.2.34/28 |
+# +-----------------------+
+#
+# iPOOL0+ePOOL4 is a helper pool for control traffic etc.
+# iPOOL1+ePOOL5 are overflow pools.
+# iPOOL2+ePOOL6 are PFC pools.
+
+ALL_TESTS="
+ ping_ipv4
+ test_qos_pfc
+"
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+NUM_NETIFS=6
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+source qos_lib.sh
+
+_1KB=1000
+_100KB=$((100 * _1KB))
+_500KB=$((500 * _1KB))
+_1MB=$((1000 * _1KB))
+_10MB=$((10 * _1MB))
+
+h1_create()
+{
+ simple_if_init $h1
+ mtu_set $h1 10000
+
+ vlan_create $h1 111 v$h1 192.0.2.33/28
+}
+
+h1_destroy()
+{
+ vlan_destroy $h1 111
+
+ mtu_restore $h1
+ simple_if_fini $h1
+}
+
+h2_create()
+{
+ simple_if_init $h2
+ mtu_set $h2 10000
+
+ vlan_create $h2 111 v$h2 192.0.2.34/28
+}
+
+h2_destroy()
+{
+ vlan_destroy $h2 111
+
+ mtu_restore $h2
+ simple_if_fini $h2
+}
+
+switch_create()
+{
+ local lanes_swp4
+ local pg1_size
+
+ # pools
+ # -----
+
+ devlink_pool_size_thtype_save 0
+ devlink_pool_size_thtype_save 4
+ devlink_pool_size_thtype_save 1
+ devlink_pool_size_thtype_save 5
+ devlink_pool_size_thtype_save 2
+ devlink_pool_size_thtype_save 6
+
+ devlink_port_pool_th_save $swp1 1
+ devlink_port_pool_th_save $swp2 6
+ devlink_port_pool_th_save $swp3 5
+ devlink_port_pool_th_save $swp4 2
+
+ devlink_tc_bind_pool_th_save $swp1 1 ingress
+ devlink_tc_bind_pool_th_save $swp2 1 egress
+ devlink_tc_bind_pool_th_save $swp3 1 egress
+ devlink_tc_bind_pool_th_save $swp4 1 ingress
+
+ # Control traffic pools. Just reduce the size. Keep them dynamic so that
+ # we don't need to change all the uninteresting quotas.
+ devlink_pool_size_thtype_set 0 dynamic $_500KB
+ devlink_pool_size_thtype_set 4 dynamic $_500KB
+
+ # Overflow pools.
+ devlink_pool_size_thtype_set 1 static $_10MB
+ devlink_pool_size_thtype_set 5 static $_10MB
+
+ # PFC pools. As per the writ, the size of egress PFC pool should be
+ # infinice, but actually it just needs to be large enough to not matter
+ # in practice, so reuse the 10MB limit.
+ devlink_pool_size_thtype_set 2 static $_1MB
+ devlink_pool_size_thtype_set 6 static $_10MB
+
+ # $swp1
+ # -----
+
+ ip link set dev $swp1 up
+ mtu_set $swp1 10000
+ vlan_create $swp1 111
+ ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1
+
+ devlink_port_pool_th_set $swp1 1 $_10MB
+ devlink_tc_bind_pool_th_set $swp1 1 ingress 1 $_10MB
+
+ # Configure qdisc so that we can configure PG and therefore pool
+ # assignment.
+ tc qdisc replace dev $swp1 root handle 1: \
+ ets bands 8 strict 8 priomap 7 6
+ dcb buffer set dev $swp1 prio-buffer all:0 1:1
+
+ # $swp2
+ # -----
+
+ ip link set dev $swp2 up
+ mtu_set $swp2 10000
+ vlan_create $swp2 111
+ ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1
+
+ devlink_port_pool_th_set $swp2 6 $_10MB
+ devlink_tc_bind_pool_th_set $swp2 1 egress 6 $_10MB
+
+ # prio 0->TC0 (band 7), 1->TC1 (band 6). TC1 is shaped.
+ tc qdisc replace dev $swp2 root handle 1: \
+ ets bands 8 strict 8 priomap 7 6
+ tc qdisc replace dev $swp2 parent 1:7 handle 17: \
+ tbf rate 200Mbit burst 131072 limit 1M
+
+ # $swp3
+ # -----
+
+ ip link set dev $swp3 up
+ mtu_set $swp3 10000
+ vlan_create $swp3 111
+ ip link set dev $swp3.111 type vlan egress-qos-map 0:0 1:1
+
+ devlink_port_pool_th_set $swp3 5 $_10MB
+ devlink_tc_bind_pool_th_set $swp3 1 egress 5 $_10MB
+
+ # prio 0->TC0 (band 7), 1->TC1 (band 6)
+ tc qdisc replace dev $swp3 root handle 1: \
+ ets bands 8 strict 8 priomap 7 6
+
+ # Need to enable PFC so that PAUSE takes effect. Therefore need to put
+ # the lossless prio into a buffer of its own. Don't bother with buffer
+ # sizes though, there is not going to be any pressure in the "backward"
+ # direction.
+ dcb buffer set dev $swp3 prio-buffer all:0 1:1
+ dcb pfc set dev $swp3 prio-pfc all:off 1:on
+
+ # $swp4
+ # -----
+
+ ip link set dev $swp4 up
+ mtu_set $swp4 10000
+ vlan_create $swp4 111
+ ip link set dev $swp4.111 type vlan ingress-qos-map 0:0 1:1
+
+ devlink_port_pool_th_set $swp4 2 $_1MB
+ devlink_tc_bind_pool_th_set $swp4 1 ingress 2 $_1MB
+
+ # Configure qdisc so that we can hand-tune headroom.
+ tc qdisc replace dev $swp4 root handle 1: \
+ ets bands 8 strict 8 priomap 7 6
+ dcb buffer set dev $swp4 prio-buffer all:0 1:1
+ dcb pfc set dev $swp4 prio-pfc all:off 1:on
+ # PG0 will get autoconfigured to Xoff, give PG1 arbitrarily 100K, which
+ # is (-2*MTU) about 80K of delay provision.
+ pg1_size=$_100KB
+
+ setup_wait_dev_with_timeout $swp4
+
+ lanes_swp4=$(ethtool $swp4 | grep 'Lanes:')
+ lanes_swp4=${lanes_swp4#*"Lanes: "}
+
+ # 8-lane ports use two buffers among which the configured buffer
+ # is split, so double the size to get twice (20K + 80K).
+ if [[ $lanes_swp4 -eq 8 ]]; then
+ pg1_size=$((pg1_size * 2))
+ fi
+
+ dcb buffer set dev $swp4 buffer-size all:0 1:$pg1_size
+
+ # bridges
+ # -------
+
+ ip link add name br1 type bridge vlan_filtering 0
+ ip link set dev $swp1.111 master br1
+ ip link set dev $swp3.111 master br1
+ ip link set dev br1 up
+
+ ip link add name br2 type bridge vlan_filtering 0
+ ip link set dev $swp2.111 master br2
+ ip link set dev $swp4.111 master br2
+ ip link set dev br2 up
+}
+
+switch_destroy()
+{
+ # Do this first so that we can reset the limits to values that are only
+ # valid for the original static / dynamic setting.
+ devlink_pool_size_thtype_restore 6
+ devlink_pool_size_thtype_restore 5
+ devlink_pool_size_thtype_restore 4
+ devlink_pool_size_thtype_restore 2
+ devlink_pool_size_thtype_restore 1
+ devlink_pool_size_thtype_restore 0
+
+ # bridges
+ # -------
+
+ ip link set dev br2 down
+ ip link set dev $swp4.111 nomaster
+ ip link set dev $swp2.111 nomaster
+ ip link del dev br2
+
+ ip link set dev br1 down
+ ip link set dev $swp3.111 nomaster
+ ip link set dev $swp1.111 nomaster
+ ip link del dev br1
+
+ # $swp4
+ # -----
+
+ dcb buffer set dev $swp4 buffer-size all:0
+ dcb pfc set dev $swp4 prio-pfc all:off
+ dcb buffer set dev $swp4 prio-buffer all:0
+ tc qdisc del dev $swp4 root
+
+ devlink_tc_bind_pool_th_restore $swp4 1 ingress
+ devlink_port_pool_th_restore $swp4 2
+
+ vlan_destroy $swp4 111
+ mtu_restore $swp4
+ ip link set dev $swp4 down
+
+ # $swp3
+ # -----
+
+ dcb pfc set dev $swp3 prio-pfc all:off
+ dcb buffer set dev $swp3 prio-buffer all:0
+ tc qdisc del dev $swp3 root
+
+ devlink_tc_bind_pool_th_restore $swp3 1 egress
+ devlink_port_pool_th_restore $swp3 5
+
+ vlan_destroy $swp3 111
+ mtu_restore $swp3
+ ip link set dev $swp3 down
+
+ # $swp2
+ # -----
+
+ tc qdisc del dev $swp2 parent 1:7
+ tc qdisc del dev $swp2 root
+
+ devlink_tc_bind_pool_th_restore $swp2 1 egress
+ devlink_port_pool_th_restore $swp2 6
+
+ vlan_destroy $swp2 111
+ mtu_restore $swp2
+ ip link set dev $swp2 down
+
+ # $swp1
+ # -----
+
+ dcb buffer set dev $swp1 prio-buffer all:0
+ tc qdisc del dev $swp1 root
+
+ devlink_tc_bind_pool_th_restore $swp1 1 ingress
+ devlink_port_pool_th_restore $swp1 1
+
+ vlan_destroy $swp1 111
+ mtu_restore $swp1
+ ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp2=${NETIFS[p3]}
+ h2=${NETIFS[p4]}
+
+ swp3=${NETIFS[p5]}
+ swp4=${NETIFS[p6]}
+
+ h2mac=$(mac_get $h2)
+
+ vrf_prepare
+
+ h1_create
+ h2_create
+ switch_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ switch_destroy
+ h2_destroy
+ h1_destroy
+
+ vrf_cleanup
+}
+
+ping_ipv4()
+{
+ ping_test $h1 192.0.2.34
+}
+
+test_qos_pfc()
+{
+ RET=0
+
+ # 10M pool, each packet is 8K of payload + headers
+ local pkts=$((_10MB / 8050))
+ local size=$((pkts * 8050))
+ local in0=$(ethtool_stats_get $swp1 rx_octets_prio_1)
+ local out0=$(ethtool_stats_get $swp2 tx_octets_prio_1)
+
+ $MZ $h1 -p 8000 -Q 1:111 -A 192.0.2.33 -B 192.0.2.34 \
+ -a own -b $h2mac -c $pkts -t udp -q
+ sleep 2
+
+ local in1=$(ethtool_stats_get $swp1 rx_octets_prio_1)
+ local out1=$(ethtool_stats_get $swp2 tx_octets_prio_1)
+
+ local din=$((in1 - in0))
+ local dout=$((out1 - out0))
+
+ local pct_in=$((din * 100 / size))
+
+ ((pct_in > 95 && pct_in < 105))
+ check_err $? "Relative ingress out of expected bounds, $pct_in% should be 100%"
+
+ ((dout == din))
+ check_err $? "$((din - dout)) bytes out of $din ingressed got lost"
+
+ log_test "PFC"
+}
+
+bail_on_lldpad
+
+trap cleanup EXIT
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS