summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/gemini-dlink-dir-685.dts
blob: 396149664297fdf81f4b15499003af95af58c684 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
/*
 * Device Tree file for D-Link DIR-685 Xtreme N Storage Router
 */

/dts-v1/;

#include "gemini.dtsi"
#include <dt-bindings/input/input.h>

/ {
	model = "D-Link DIR-685 Xtreme N Storage Router";
	compatible = "dlink,dir-685", "cortina,gemini";
	#address-cells = <1>;
	#size-cells = <1>;

	memory@0 {
		/* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
		device_type = "memory";
		reg = <0x00000000 0x8000000>;
	};

	chosen {
		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
		stdout-path = "uart0:19200n8";
	};

	gpio_keys {
		compatible = "gpio-keys";

		button-esc {
			debounce-interval = <100>;
			wakeup-source;
			linux,code = <KEY_ESC>;
			label = "reset";
			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
		};
		button-eject {
			debounce-interval = <100>;
			wakeup-source;
			linux,code = <KEY_EJECTCD>;
			label = "unmount";
			/* Collides with LPC LFRAME, UART RTS, SSP TXD */
			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
		};
	};

	vdisp: regulator {
		compatible = "regulator-fixed";
		regulator-name = "display-power";
		regulator-min-microvolt = <3600000>;
		regulator-max-microvolt = <3600000>;
		/* Collides with LCD E */
		gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	spi {
		compatible = "spi-gpio";
		#address-cells = <1>;
		#size-cells = <0>;

		/* Collides with IDE pins, that's cool (we do not use them) */
		sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
		miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
		mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
		num-chipselects = <1>;

		panel: display@0 {
			compatible = "dlink,dir-685-panel", "ilitek,ili9322";
			reg = <0>;
			/* 50 ns min period = 20 MHz */
			spi-max-frequency = <20000000>;
			vcc-supply = <&vdisp>;
			iovcc-supply = <&vdisp>;
			vci-supply = <&vdisp>;

			port {
				panel_in: endpoint {
					remote-endpoint = <&display_out>;
				};
			};
		};
	};

	leds {
		compatible = "gpio-leds";
		led-wps {
			label = "dir685:blue:WPS";
			/* Collides with ICE */
			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
			default-state = "on";
			linux,default-trigger = "heartbeat";
		};
		/*
		 * These two LEDs are on the side of the device.
		 * For electrical reasons, both LEDs cannot be active
		 * at the same time so only blue or orange can be on at
		 * one time. Enabling both makes the LED go dark.
		 * The LEDs both sit inside the unmount button and the
		 * label on the case says "unmount".
		 */
		led-blue-hd {
			label = "dir685:blue:HD";
			/* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			linux,default-trigger = "disk-read";
		};
		led-orange-hd {
			label = "dir685:orange:HD";
			/* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			linux,default-trigger = "disk-write";
		};
	};

	/*
	 * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
	 * sensor. It is turned on when the temperature exceeds 46 degrees
	 * and turned off when the temperatures goes below 41 degrees
	 * (celsius).
	 */
	fan0: gpio-fan {
		compatible = "gpio-fan";
		/* Collides with IDE */
		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
		gpio-fan,speed-map = <0 0>, <10000 1>;
		#cooling-cells = <2>;
	};

	thermal-zones {
		chassis-thermal {
			/* Poll every 20 seconds */
			polling-delay = <20000>;
			/* Poll every 2nd second when cooling */
			polling-delay-passive = <2000>;
			/*  Use the thermal sensor in the hard drive */
			thermal-sensors = <&drive0>;

			/* Tripping points from the fan.script in the rootfs */
			trips {
				alert: chassis-alert {
					/* At 43 degrees turn on the fan */
					temperature = <43000>;
					hysteresis = <3000>;
					type = "active";
				};
				crit: chassis-crit {
					/* Just shut down at 60 degrees */
					temperature = <60000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&alert>;
					cooling-device = <&fan0 1 1>;
				};
			};
		};
	};

	/*
	 * The touchpad input is connected to a GPIO bit-banged
	 * I2C bus.
	 */
	i2c {
		compatible = "i2c-gpio";
		/* Collides with ICE */
		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
		#address-cells = <1>;
		#size-cells = <0>;

		touchkeys@26 {
			compatible = "dlink,dir685-touchkeys";
			reg = <0x26>;
			interrupt-parent = <&gpio0>;
			/* Collides with NAND flash */
			interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
		};
	};

	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
	switch {
		compatible = "realtek,rtl8366rb";
		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
		mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
		realtek,disable-leds;

		switch_intc: interrupt-controller {
			/* GPIO 15 provides the interrupt */
			interrupt-parent = <&gpio0>;
			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <1>;
		};

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				label = "lan0";
				phy-handle = <&phy0>;
			};
			port@1 {
				reg = <1>;
				label = "lan1";
				phy-handle = <&phy1>;
			};
			port@2 {
				reg = <2>;
				label = "lan2";
				phy-handle = <&phy2>;
			};
			port@3 {
				reg = <3>;
				label = "lan3";
				phy-handle = <&phy3>;
			};
			port@4 {
				reg = <4>;
				label = "wan";
				phy-handle = <&phy4>;
			};
			rtl8366rb_cpu_port: port@5 {
				reg = <5>;
				label = "cpu";
				ethernet = <&gmac0>;
				phy-mode = "rgmii";
				fixed-link {
					speed = <1000>;
					full-duplex;
					pause;
				};
			};

		};

		mdio {
			compatible = "realtek,smi-mdio";
			#address-cells = <1>;
			#size-cells = <0>;

			phy0: phy@0 {
				reg = <0>;
				interrupt-parent = <&switch_intc>;
				interrupts = <0>;
			};
			phy1: phy@1 {
				reg = <1>;
				interrupt-parent = <&switch_intc>;
				interrupts = <1>;
			};
			phy2: phy@2 {
				reg = <2>;
				interrupt-parent = <&switch_intc>;
				interrupts = <2>;
			};
			phy3: phy@3 {
				reg = <3>;
				interrupt-parent = <&switch_intc>;
				interrupts = <3>;
			};
			phy4: phy@4 {
				reg = <4>;
				interrupt-parent = <&switch_intc>;
				interrupts = <12>;
			};
		};
	};

	soc {
		flash@30000000 {
			/*
			 * Flash access collides with the Chip Enable signal for
			 * the display panel, that reuse the parallel flash Chip
			 * Select 1 (CS1). We switch the pin control state so we
			 * enable these pins for flash access only when we need
			 * then, and when disabled they can be used for GPIO which
			 * is what the display panel needs.
			 */
			status = "okay";
			pinctrl-names = "enabled", "disabled";
			pinctrl-0 = <&pflash_default_pins>;
			pinctrl-1 = <&pflash_disabled_pins>;

			/* 32MB of flash */
			reg = <0x30000000 0x02000000>;

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				/*
				 * This "RedBoot" is the Storlink derivative.
				 */
				partition@0 {
					label = "RedBoot";
					reg = <0x00000000 0x00040000>;
					read-only;
				};
				/*
				 * This firmware image contains the kernel catenated
				 * with the squashfs root filesystem. For some reason
				 * this is called "upgrade" on the vendor system.
				 */
				partition@40000 {
					label = "upgrade";
					reg = <0x00040000 0x01f40000>;
					read-only;
				};
				/* RGDB, Residental Gateway Database? */
				partition@1f80000 {
					label = "rgdb";
					reg = <0x01f80000 0x00040000>;
					read-only;
				};
				/*
				 * This partition contains MAC addresses for WAN,
				 * WLAN and LAN, and the country code (for wireless
				 * I guess).
				 */
				partition@1fc0000 {
					label = "nvram";
					reg = <0x01fc0000 0x00020000>;
					read-only;
				};
				partition@1fe0000 {
					label = "LangPack";
					reg = <0x01fe0000 0x00020000>;
					read-only;
				};
			};
		};

		syscon: syscon@40000000 {
			pinctrl {
				/*
				 * gpio0bgrp cover line 5, 6 used by TK I2C
				 * gpio0bgrp cover line 7 used by WPS LED
				 * gpio0cgrp cover line 8, 13 used by keys
				 *           and 11, 12 used by the HD LEDs
				 *           and line 14, 15 used by RTL8366
				 *           RESET and phy ready
				 * gpio0egrp cover line 16 used by VDISP
				 * gpio0fgrp cover line 17 used by TK IRQ
				 * gpio0ggrp cover line 20 used by panel CS
				 * gpio0hgrp cover line 21,22 used by RTL8366RB MDIO
				 */
				gpio0_default_pins: pinctrl-gpio0 {
					mux {
						function = "gpio0";
						groups = "gpio0bgrp",
						"gpio0cgrp",
						"gpio0egrp",
						"gpio0fgrp",
						"gpio0hgrp";
					};
				};
				/*
				 * gpio1bgrp cover line 5,8,7 used by panel SPI
				 * also line 6 used by the fan
				 *
				 */
				gpio1_default_pins: pinctrl-gpio1 {
					mux {
						function = "gpio1";
						groups = "gpio1bgrp";
					};
				};
				/*
				 * These GPIO groups will be mapped in over some
				 * of the flash pins when the flash is not in
				 * active use.
				 */
				pflash_disabled_pins: pinctrl-pflash-disabled {
					mux {
						function = "gpio0";
						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
							 "gpio0kgrp";
					};
				};
				pinctrl-gmii {
					mux {
						function = "gmii";
						groups = "gmii_gmac0_grp";
					};
					conf0 {
						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV",
						     "Y7 GMAC0 RXC", "Y11 GMAC1 RXC",
						     "T8 GMAC0 TXEN", "W11 GMAC1 TXEN",
						     "U8 GMAC0 TXC", "V11 GMAC1 TXC",
						     "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
						     "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
						     "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
						     "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
						     "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
						     "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
						     "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
						     "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
						skew-delay = <7>;
					};
					/* Set up drive strength on GMAC0 to 16 mA */
					conf1 {
						groups = "gmii_gmac0_grp";
						drive-strength = <16>;
					};
				};
			};
		};

		sata: sata@46000000 {
			cortina,gemini-ata-muxmode = <0>;
			cortina,gemini-enable-sata-bridge;
			status = "okay";
		};

		gpio0: gpio@4d000000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gpio0_default_pins>;
		};

		gpio1: gpio@4e000000 {
			pinctrl-names = "default";
			pinctrl-0 = <&gpio1_default_pins>;
		};

		pci@50000000 {
			status = "okay";
		};

		ethernet@60000000 {
			status = "okay";

			ethernet-port@0 {
				phy-mode = "rgmii";
				fixed-link {
					speed = <1000>;
					full-duplex;
					pause;
				};
			};
			ethernet-port@1 {
				/* Not used in this platform */
			};
		};

		ide@63000000 {
			status = "okay";

			/*
			 * This drive may have a temperature sensor with a
			 * thermal zone we can use for thermal control of the
			 * chassis temperature using the fan.
			 */
			drive0: ide-port@0 {
				reg = <0>;
				#thermal-sensor-cells = <0>;
			};
		};

		display-controller@6a000000 {
			status = "okay";

			port {
				display_out: endpoint {
					remote-endpoint = <&panel_in>;
				};
			};
		};

		usb@68000000 {
			status = "okay";
		};

		usb@69000000 {
			status = "okay";
		};
	};
};