summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
blob: c9133ba2d705041d6edaad8cdfd54878f0327dc1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright 2017-2022 Toradex
 */

/ {
	chosen {
		stdout-path = "serial0:115200n8";
	};

	gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;

		power {
			label = "Wake-Up";
			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
			linux,code = <KEY_WAKEUP>;
			debounce-interval = <10>;
			wakeup-source;
		};
	};

	reg_3v3: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	reg_5v0: regulator-5v0 {
		compatible = "regulator-fixed";
		regulator-name = "5V";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_usbh_vbus: regulator-usbh-vbus {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbh_reg>;
		regulator-name = "VCC_USB[1-4]";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
		vin-supply = <&reg_5v0>;
	};
};

&adc1 {
	status = "okay";
};

&ecspi1 {
	status = "okay";

	num-cs = <2>;
	cs-gpios = <
		&gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */
		&gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */
	>;
};

/*
 * Following SODIMM Pins should not be accessed as GPIO on Aster board:
 * 134 - AIN5_SCL (no connection)
 * 127 - Voltage Level Translator OE# signal (IC11 and IC12)
 *
 * To configure GPIO to LED5, please disable FEC2 and uncomment the following:
 *	&iomuxc {
 *		pinctrl-names = "default";
 *		pinctrl-0 = <
 *			&pinctrl_gpio1
 *			&pinctrl_gpio2
 *			&pinctrl_gpio3
 *			&pinctrl_gpio4
 *			&pinctrl_gpio6 - for non-WiFi modules only
 *			&pinctrl_gpio7
 *			&pinctrl_gpio_aster
 *		>;
 *
 *		pinctrl_gpio_aster: gpio-aster {
 *			fsl,pins = <
 *				MX6UL_PAD_GPIO1_IO07__GPIO1_IO07    0x1b0b0
 *			>;
 *		};
 *  };
 */

&i2c1 {
	status = "okay";

	m41t0m6: rtc@68 {
		compatible = "st,m41t0";
		reg = <0x68>;
	};
};

/* PWM <A> */
&pwm4 {
	status = "okay";
};

/* PWM <B> */
&pwm5 {
	status = "okay";
};

/* PWM <C> */
&pwm6 {
	status = "okay";
};

/* PWM <D> */
&pwm7 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart5 {
	status = "okay";
};

&usbotg1 {
	vbus-supply = <&reg_usbh_vbus>;
	status = "okay";
};

&usbotg2 {
	vbus-supply = <&reg_usbh_vbus>;
	status = "okay";
};

&usdhc1 {
	vmmc-supply = <&reg_3v3>;
	status = "okay";
};