1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
|
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright 2020-2021 TQ-Systems GmbH
*/
#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mm.dtsi"
/ {
model = "TQ-Systems GmbH i.MX8MM TQMa8MxML";
compatible = "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
memory@40000000 {
device_type = "memory";
/* our minimum RAM config will be 1024 MiB */
reg = <0x00000000 0x40000000 0 0x40000000>;
};
/* e-MMC IO, needed for HS modes */
reg_vcc1v8: regulator-vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "TQMA8MXML_VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
/* identical to buck4_reg, but should never change */
reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "TQMA8MXML_VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* global autoconfigured region for contiguous allocations */
linux,cma {
compatible = "shared-dma-pool";
reusable;
/* 640 MiB */
size = <0 0x28000000>;
/* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
alloc-ranges = <0 0x40000000 0 0x78000000>;
linux,cma-default;
};
};
};
&A53_0 {
cpu-supply = <&buck2_reg>;
};
&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <84000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
&gpu_2d {
status = "okay";
};
&gpu_3d {
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
sensor0: temperature-sensor-eeprom@1b {
compatible = "nxp,se97", "jedec,jc-42.4-temp";
reg = <0x1b>;
};
pca9450: pmic@25 {
compatible = "nxp,pca9450a";
reg = <0x25>;
/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
pinctrl-0 = <&pinctrl_pmic>;
pinctrl-names = "default";
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
regulators {
/* V_0V85_SOC: 0.85 */
buck1_reg: BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
/* VDD_ARM */
buck2_reg: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
regulator-ramp-delay = <3125>;
};
/* V_0V85_GPU / DRAM / VPU */
buck3_reg: BUCK3 {
regulator-name = "BUCK3";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
/* VCC3V3 -> VMMC, ... must not be changed */
buck4_reg: BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
buck5_reg: BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V1 -> RAM, ... must not be changed */
buck6_reg: BUCK6 {
regulator-name = "BUCK6";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V8_SNVS */
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* V_0V8_SNVS */
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V8_ANA */
ldo3_reg: LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* V_0V9_MIPI */
ldo4_reg: LDO4 {
regulator-name = "LDO4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
/* VCC SD IO - switched using SD2 VSELECT */
ldo5_reg: LDO5 {
regulator-name = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
pcf85063: rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
quartz-load-femtofarads = <7000>;
};
eeprom1: eeprom@53 {
compatible = "nxp,se97b", "atmel,24c02";
read-only;
reg = <0x53>;
pagesize = <16>;
};
eeprom0: eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
};
};
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
non-removable;
no-sd;
no-sdio;
vmmc-supply = <®_vcc3v3>;
vqmmc-supply = <®_vcc1v8>;
status = "okay";
};
/*
* Attention:
* wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
* without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
*/
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_flexspi: flexspigrp {
fsl,pins = <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82>,
<MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>,
<MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82>,
<MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82>,
<MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82>,
<MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000004>,
<MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000004>;
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x40000004>,
<MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x40000004>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x94>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x84>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d4>,
<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>,
<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>,
<MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>,
<MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>,
<MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>,
<MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>,
<MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>,
/* option USDHC3_RESET_B not defined, only in RM */
<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x84>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d2>,
<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>,
<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>,
<MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>,
<MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>,
<MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>,
<MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>,
<MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>,
/* option USDHC3_RESET_B not defined, only in RM */
<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x84>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d6>,
<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>,
<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>,
<MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>,
<MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>,
<MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>,
<MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>,
<MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>,
/* option USDHC3_RESET_B not defined, only in RM */
<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x84>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x84>;
};
};
|
