diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
| commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
| tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/bpf | |
| parent | Initial commit. (diff) | |
| download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip | |
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/bpf')
33 files changed, 6001 insertions, 0 deletions
diff --git a/Documentation/bpf/bpf_design_QA.rst b/Documentation/bpf/bpf_design_QA.rst new file mode 100644 index 000000000..a210b8a4d --- /dev/null +++ b/Documentation/bpf/bpf_design_QA.rst @@ -0,0 +1,300 @@ +============== +BPF Design Q&A +============== + +BPF extensibility and applicability to networking, tracing, security +in the linux kernel and several user space implementations of BPF +virtual machine led to a number of misunderstanding on what BPF actually is. +This short QA is an attempt to address that and outline a direction +of where BPF is heading long term. + +.. contents:: + :local: + :depth: 3 + +Questions and Answers +===================== + +Q: Is BPF a generic instruction set similar to x64 and arm64? +------------------------------------------------------------- +A: NO. + +Q: Is BPF a generic virtual machine ? +------------------------------------- +A: NO. + +BPF is generic instruction set *with* C calling convention. +----------------------------------------------------------- + +Q: Why C calling convention was chosen? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A: Because BPF programs are designed to run in the linux kernel +which is written in C, hence BPF defines instruction set compatible +with two most used architectures x64 and arm64 (and takes into +consideration important quirks of other architectures) and +defines calling convention that is compatible with C calling +convention of the linux kernel on those architectures. + +Q: Can multiple return values be supported in the future? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +A: NO. BPF allows only register R0 to be used as return value. + +Q: Can more than 5 function arguments be supported in the future? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +A: NO. BPF calling convention only allows registers R1-R5 to be used +as arguments. BPF is not a standalone instruction set. +(unlike x64 ISA that allows msft, cdecl and other conventions) + +Q: Can BPF programs access instruction pointer or return address? +----------------------------------------------------------------- +A: NO. + +Q: Can BPF programs access stack pointer ? +------------------------------------------ +A: NO. + +Only frame pointer (register R10) is accessible. +From compiler point of view it's necessary to have stack pointer. +For example, LLVM defines register R11 as stack pointer in its +BPF backend, but it makes sure that generated code never uses it. + +Q: Does C-calling convention diminishes possible use cases? +----------------------------------------------------------- +A: YES. + +BPF design forces addition of major functionality in the form +of kernel helper functions and kernel objects like BPF maps with +seamless interoperability between them. It lets kernel call into +BPF programs and programs call kernel helpers with zero overhead, +as all of them were native C code. That is particularly the case +for JITed BPF programs that are indistinguishable from +native kernel C code. + +Q: Does it mean that 'innovative' extensions to BPF code are disallowed? +------------------------------------------------------------------------ +A: Soft yes. + +At least for now, until BPF core has support for +bpf-to-bpf calls, indirect calls, loops, global variables, +jump tables, read-only sections, and all other normal constructs +that C code can produce. + +Q: Can loops be supported in a safe way? +---------------------------------------- +A: It's not clear yet. + +BPF developers are trying to find a way to +support bounded loops. + +Q: What are the verifier limits? +-------------------------------- +A: The only limit known to the user space is BPF_MAXINSNS (4096). +It's the maximum number of instructions that the unprivileged bpf +program can have. The verifier has various internal limits. +Like the maximum number of instructions that can be explored during +program analysis. Currently, that limit is set to 1 million. +Which essentially means that the largest program can consist +of 1 million NOP instructions. There is a limit to the maximum number +of subsequent branches, a limit to the number of nested bpf-to-bpf +calls, a limit to the number of the verifier states per instruction, +a limit to the number of maps used by the program. +All these limits can be hit with a sufficiently complex program. +There are also non-numerical limits that can cause the program +to be rejected. The verifier used to recognize only pointer + constant +expressions. Now it can recognize pointer + bounded_register. +bpf_lookup_map_elem(key) had a requirement that 'key' must be +a pointer to the stack. Now, 'key' can be a pointer to map value. +The verifier is steadily getting 'smarter'. The limits are +being removed. The only way to know that the program is going to +be accepted by the verifier is to try to load it. +The bpf development process guarantees that the future kernel +versions will accept all bpf programs that were accepted by +the earlier versions. + + +Instruction level questions +--------------------------- + +Q: LD_ABS and LD_IND instructions vs C code +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Q: How come LD_ABS and LD_IND instruction are present in BPF whereas +C code cannot express them and has to use builtin intrinsics? + +A: This is artifact of compatibility with classic BPF. Modern +networking code in BPF performs better without them. +See 'direct packet access'. + +Q: BPF instructions mapping not one-to-one to native CPU +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Q: It seems not all BPF instructions are one-to-one to native CPU. +For example why BPF_JNE and other compare and jumps are not cpu-like? + +A: This was necessary to avoid introducing flags into ISA which are +impossible to make generic and efficient across CPU architectures. + +Q: Why BPF_DIV instruction doesn't map to x64 div? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +A: Because if we picked one-to-one relationship to x64 it would have made +it more complicated to support on arm64 and other archs. Also it +needs div-by-zero runtime check. + +Q: Why there is no BPF_SDIV for signed divide operation? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +A: Because it would be rarely used. llvm errors in such case and +prints a suggestion to use unsigned divide instead. + +Q: Why BPF has implicit prologue and epilogue? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +A: Because architectures like sparc have register windows and in general +there are enough subtle differences between architectures, so naive +store return address into stack won't work. Another reason is BPF has +to be safe from division by zero (and legacy exception path +of LD_ABS insn). Those instructions need to invoke epilogue and +return implicitly. + +Q: Why BPF_JLT and BPF_JLE instructions were not introduced in the beginning? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +A: Because classic BPF didn't have them and BPF authors felt that compiler +workaround would be acceptable. Turned out that programs lose performance +due to lack of these compare instructions and they were added. +These two instructions is a perfect example what kind of new BPF +instructions are acceptable and can be added in the future. +These two already had equivalent instructions in native CPUs. +New instructions that don't have one-to-one mapping to HW instructions +will not be accepted. + +Q: BPF 32-bit subregister requirements +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Q: BPF 32-bit subregisters have a requirement to zero upper 32-bits of BPF +registers which makes BPF inefficient virtual machine for 32-bit +CPU architectures and 32-bit HW accelerators. Can true 32-bit registers +be added to BPF in the future? + +A: NO. + +But some optimizations on zero-ing the upper 32 bits for BPF registers are +available, and can be leveraged to improve the performance of JITed BPF +programs for 32-bit architectures. + +Starting with version 7, LLVM is able to generate instructions that operate +on 32-bit subregisters, provided the option -mattr=+alu32 is passed for +compiling a program. Furthermore, the verifier can now mark the +instructions for which zero-ing the upper bits of the destination register +is required, and insert an explicit zero-extension (zext) instruction +(a mov32 variant). This means that for architectures without zext hardware +support, the JIT back-ends do not need to clear the upper bits for +subregisters written by alu32 instructions or narrow loads. Instead, the +back-ends simply need to support code generation for that mov32 variant, +and to overwrite bpf_jit_needs_zext() to make it return "true" (in order to +enable zext insertion in the verifier). + +Note that it is possible for a JIT back-end to have partial hardware +support for zext. In that case, if verifier zext insertion is enabled, +it could lead to the insertion of unnecessary zext instructions. Such +instructions could be removed by creating a simple peephole inside the JIT +back-end: if one instruction has hardware support for zext and if the next +instruction is an explicit zext, then the latter can be skipped when doing +the code generation. + +Q: Does BPF have a stable ABI? +------------------------------ +A: YES. BPF instructions, arguments to BPF programs, set of helper +functions and their arguments, recognized return codes are all part +of ABI. However there is one specific exception to tracing programs +which are using helpers like bpf_probe_read() to walk kernel internal +data structures and compile with kernel internal headers. Both of these +kernel internals are subject to change and can break with newer kernels +such that the program needs to be adapted accordingly. + +Q: Are tracepoints part of the stable ABI? +------------------------------------------ +A: NO. Tracepoints are tied to internal implementation details hence they are +subject to change and can break with newer kernels. BPF programs need to change +accordingly when this happens. + +Q: Are places where kprobes can attach part of the stable ABI? +-------------------------------------------------------------- +A: NO. The places to which kprobes can attach are internal implementation +details, which means that they are subject to change and can break with +newer kernels. BPF programs need to change accordingly when this happens. + +Q: How much stack space a BPF program uses? +------------------------------------------- +A: Currently all program types are limited to 512 bytes of stack +space, but the verifier computes the actual amount of stack used +and both interpreter and most JITed code consume necessary amount. + +Q: Can BPF be offloaded to HW? +------------------------------ +A: YES. BPF HW offload is supported by NFP driver. + +Q: Does classic BPF interpreter still exist? +-------------------------------------------- +A: NO. Classic BPF programs are converted into extend BPF instructions. + +Q: Can BPF call arbitrary kernel functions? +------------------------------------------- +A: NO. BPF programs can only call a set of helper functions which +is defined for every program type. + +Q: Can BPF overwrite arbitrary kernel memory? +--------------------------------------------- +A: NO. + +Tracing bpf programs can *read* arbitrary memory with bpf_probe_read() +and bpf_probe_read_str() helpers. Networking programs cannot read +arbitrary memory, since they don't have access to these helpers. +Programs can never read or write arbitrary memory directly. + +Q: Can BPF overwrite arbitrary user memory? +------------------------------------------- +A: Sort-of. + +Tracing BPF programs can overwrite the user memory +of the current task with bpf_probe_write_user(). Every time such +program is loaded the kernel will print warning message, so +this helper is only useful for experiments and prototypes. +Tracing BPF programs are root only. + +Q: New functionality via kernel modules? +---------------------------------------- +Q: Can BPF functionality such as new program or map types, new +helpers, etc be added out of kernel module code? + +A: NO. + +Q: Directly calling kernel function is an ABI? +---------------------------------------------- +Q: Some kernel functions (e.g. tcp_slow_start) can be called +by BPF programs. Do these kernel functions become an ABI? + +A: NO. + +The kernel function protos will change and the bpf programs will be +rejected by the verifier. Also, for example, some of the bpf-callable +kernel functions have already been used by other kernel tcp +cc (congestion-control) implementations. If any of these kernel +functions has changed, both the in-tree and out-of-tree kernel tcp cc +implementations have to be changed. The same goes for the bpf +programs and they have to be adjusted accordingly. + +Q: Attaching to arbitrary kernel functions is an ABI? +----------------------------------------------------- +Q: BPF programs can be attached to many kernel functions. Do these +kernel functions become part of the ABI? + +A: NO. + +The kernel function prototypes will change, and BPF programs attaching to +them will need to change. The BPF compile-once-run-everywhere (CO-RE) +should be used in order to make it easier to adapt your BPF programs to +different versions of the kernel. + +Q: Marking a function with BTF_ID makes that function an ABI? +------------------------------------------------------------- +A: NO. + +The BTF_ID macro does not cause a function to become part of the ABI +any more than does the EXPORT_SYMBOL_GPL macro. diff --git a/Documentation/bpf/bpf_devel_QA.rst b/Documentation/bpf/bpf_devel_QA.rst new file mode 100644 index 000000000..761474bd7 --- /dev/null +++ b/Documentation/bpf/bpf_devel_QA.rst @@ -0,0 +1,668 @@ +================================= +HOWTO interact with BPF subsystem +================================= + +This document provides information for the BPF subsystem about various +workflows related to reporting bugs, submitting patches, and queueing +patches for stable kernels. + +For general information about submitting patches, please refer to +`Documentation/process/`_. This document only describes additional specifics +related to BPF. + +.. contents:: + :local: + :depth: 2 + +Reporting bugs +============== + +Q: How do I report bugs for BPF kernel code? +-------------------------------------------- +A: Since all BPF kernel development as well as bpftool and iproute2 BPF +loader development happens through the bpf kernel mailing list, +please report any found issues around BPF to the following mailing +list: + + bpf@vger.kernel.org + +This may also include issues related to XDP, BPF tracing, etc. + +Given netdev has a high volume of traffic, please also add the BPF +maintainers to Cc (from kernel ``MAINTAINERS`` file): + +* Alexei Starovoitov <ast@kernel.org> +* Daniel Borkmann <daniel@iogearbox.net> + +In case a buggy commit has already been identified, make sure to keep +the actual commit authors in Cc as well for the report. They can +typically be identified through the kernel's git tree. + +**Please do NOT report BPF issues to bugzilla.kernel.org since it +is a guarantee that the reported issue will be overlooked.** + +Submitting patches +================== + +Q: To which mailing list do I need to submit my BPF patches? +------------------------------------------------------------ +A: Please submit your BPF patches to the bpf kernel mailing list: + + bpf@vger.kernel.org + +In case your patch has changes in various different subsystems (e.g. +networking, tracing, security, etc), make sure to Cc the related kernel mailing +lists and maintainers from there as well, so they are able to review +the changes and provide their Acked-by's to the patches. + +Q: Where can I find patches currently under discussion for BPF subsystem? +------------------------------------------------------------------------- +A: All patches that are Cc'ed to netdev are queued for review under netdev +patchwork project: + + https://patchwork.kernel.org/project/netdevbpf/list/ + +Those patches which target BPF, are assigned to a 'bpf' delegate for +further processing from BPF maintainers. The current queue with +patches under review can be found at: + + https://patchwork.kernel.org/project/netdevbpf/list/?delegate=121173 + +Once the patches have been reviewed by the BPF community as a whole +and approved by the BPF maintainers, their status in patchwork will be +changed to 'Accepted' and the submitter will be notified by mail. This +means that the patches look good from a BPF perspective and have been +applied to one of the two BPF kernel trees. + +In case feedback from the community requires a respin of the patches, +their status in patchwork will be set to 'Changes Requested', and purged +from the current review queue. Likewise for cases where patches would +get rejected or are not applicable to the BPF trees (but assigned to +the 'bpf' delegate). + +Q: How do the changes make their way into Linux? +------------------------------------------------ +A: There are two BPF kernel trees (git repositories). Once patches have +been accepted by the BPF maintainers, they will be applied to one +of the two BPF trees: + + * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git/ + * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/ + +The bpf tree itself is for fixes only, whereas bpf-next for features, +cleanups or other kind of improvements ("next-like" content). This is +analogous to net and net-next trees for networking. Both bpf and +bpf-next will only have a master branch in order to simplify against +which branch patches should get rebased to. + +Accumulated BPF patches in the bpf tree will regularly get pulled +into the net kernel tree. Likewise, accumulated BPF patches accepted +into the bpf-next tree will make their way into net-next tree. net and +net-next are both run by David S. Miller. From there, they will go +into the kernel mainline tree run by Linus Torvalds. To read up on the +process of net and net-next being merged into the mainline tree, see +the :ref:`netdev-FAQ` + + + +Occasionally, to prevent merge conflicts, we might send pull requests +to other trees (e.g. tracing) with a small subset of the patches, but +net and net-next are always the main trees targeted for integration. + +The pull requests will contain a high-level summary of the accumulated +patches and can be searched on netdev kernel mailing list through the +following subject lines (``yyyy-mm-dd`` is the date of the pull +request):: + + pull-request: bpf yyyy-mm-dd + pull-request: bpf-next yyyy-mm-dd + +Q: How do I indicate which tree (bpf vs. bpf-next) my patch should be applied to? +--------------------------------------------------------------------------------- + +A: The process is the very same as described in the :ref:`netdev-FAQ`, +so please read up on it. The subject line must indicate whether the +patch is a fix or rather "next-like" content in order to let the +maintainers know whether it is targeted at bpf or bpf-next. + +For fixes eventually landing in bpf -> net tree, the subject must +look like:: + + git format-patch --subject-prefix='PATCH bpf' start..finish + +For features/improvements/etc that should eventually land in +bpf-next -> net-next, the subject must look like:: + + git format-patch --subject-prefix='PATCH bpf-next' start..finish + +If unsure whether the patch or patch series should go into bpf +or net directly, or bpf-next or net-next directly, it is not a +problem either if the subject line says net or net-next as target. +It is eventually up to the maintainers to do the delegation of +the patches. + +If it is clear that patches should go into bpf or bpf-next tree, +please make sure to rebase the patches against those trees in +order to reduce potential conflicts. + +In case the patch or patch series has to be reworked and sent out +again in a second or later revision, it is also required to add a +version number (``v2``, ``v3``, ...) into the subject prefix:: + + git format-patch --subject-prefix='PATCH bpf-next v2' start..finish + +When changes have been requested to the patch series, always send the +whole patch series again with the feedback incorporated (never send +individual diffs on top of the old series). + +Q: What does it mean when a patch gets applied to bpf or bpf-next tree? +----------------------------------------------------------------------- +A: It means that the patch looks good for mainline inclusion from +a BPF point of view. + +Be aware that this is not a final verdict that the patch will +automatically get accepted into net or net-next trees eventually: + +On the bpf kernel mailing list reviews can come in at any point +in time. If discussions around a patch conclude that they cannot +get included as-is, we will either apply a follow-up fix or drop +them from the trees entirely. Therefore, we also reserve to rebase +the trees when deemed necessary. After all, the purpose of the tree +is to: + +i) accumulate and stage BPF patches for integration into trees + like net and net-next, and + +ii) run extensive BPF test suite and + workloads on the patches before they make their way any further. + +Once the BPF pull request was accepted by David S. Miller, then +the patches end up in net or net-next tree, respectively, and +make their way from there further into mainline. Again, see the +:ref:`netdev-FAQ` for additional information e.g. on how often they are +merged to mainline. + +Q: How long do I need to wait for feedback on my BPF patches? +------------------------------------------------------------- +A: We try to keep the latency low. The usual time to feedback will +be around 2 or 3 business days. It may vary depending on the +complexity of changes and current patch load. + +Q: How often do you send pull requests to major kernel trees like net or net-next? +---------------------------------------------------------------------------------- + +A: Pull requests will be sent out rather often in order to not +accumulate too many patches in bpf or bpf-next. + +As a rule of thumb, expect pull requests for each tree regularly +at the end of the week. In some cases pull requests could additionally +come also in the middle of the week depending on the current patch +load or urgency. + +Q: Are patches applied to bpf-next when the merge window is open? +----------------------------------------------------------------- +A: For the time when the merge window is open, bpf-next will not be +processed. This is roughly analogous to net-next patch processing, +so feel free to read up on the :ref:`netdev-FAQ` about further details. + +During those two weeks of merge window, we might ask you to resend +your patch series once bpf-next is open again. Once Linus released +a ``v*-rc1`` after the merge window, we continue processing of bpf-next. + +For non-subscribers to kernel mailing lists, there is also a status +page run by David S. Miller on net-next that provides guidance: + + http://vger.kernel.org/~davem/net-next.html + +Q: Verifier changes and test cases +---------------------------------- +Q: I made a BPF verifier change, do I need to add test cases for +BPF kernel selftests_? + +A: If the patch has changes to the behavior of the verifier, then yes, +it is absolutely necessary to add test cases to the BPF kernel +selftests_ suite. If they are not present and we think they are +needed, then we might ask for them before accepting any changes. + +In particular, test_verifier.c is tracking a high number of BPF test +cases, including a lot of corner cases that LLVM BPF back end may +generate out of the restricted C code. Thus, adding test cases is +absolutely crucial to make sure future changes do not accidentally +affect prior use-cases. Thus, treat those test cases as: verifier +behavior that is not tracked in test_verifier.c could potentially +be subject to change. + +Q: samples/bpf preference vs selftests? +--------------------------------------- +Q: When should I add code to ``samples/bpf/`` and when to BPF kernel +selftests_? + +A: In general, we prefer additions to BPF kernel selftests_ rather than +``samples/bpf/``. The rationale is very simple: kernel selftests are +regularly run by various bots to test for kernel regressions. + +The more test cases we add to BPF selftests, the better the coverage +and the less likely it is that those could accidentally break. It is +not that BPF kernel selftests cannot demo how a specific feature can +be used. + +That said, ``samples/bpf/`` may be a good place for people to get started, +so it might be advisable that simple demos of features could go into +``samples/bpf/``, but advanced functional and corner-case testing rather +into kernel selftests. + +If your sample looks like a test case, then go for BPF kernel selftests +instead! + +Q: When should I add code to the bpftool? +----------------------------------------- +A: The main purpose of bpftool (under tools/bpf/bpftool/) is to provide +a central user space tool for debugging and introspection of BPF programs +and maps that are active in the kernel. If UAPI changes related to BPF +enable for dumping additional information of programs or maps, then +bpftool should be extended as well to support dumping them. + +Q: When should I add code to iproute2's BPF loader? +--------------------------------------------------- +A: For UAPI changes related to the XDP or tc layer (e.g. ``cls_bpf``), +the convention is that those control-path related changes are added to +iproute2's BPF loader as well from user space side. This is not only +useful to have UAPI changes properly designed to be usable, but also +to make those changes available to a wider user base of major +downstream distributions. + +Q: Do you accept patches as well for iproute2's BPF loader? +----------------------------------------------------------- +A: Patches for the iproute2's BPF loader have to be sent to: + + netdev@vger.kernel.org + +While those patches are not processed by the BPF kernel maintainers, +please keep them in Cc as well, so they can be reviewed. + +The official git repository for iproute2 is run by Stephen Hemminger +and can be found at: + + https://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2.git/ + +The patches need to have a subject prefix of '``[PATCH iproute2 +master]``' or '``[PATCH iproute2 net-next]``'. '``master``' or +'``net-next``' describes the target branch where the patch should be +applied to. Meaning, if kernel changes went into the net-next kernel +tree, then the related iproute2 changes need to go into the iproute2 +net-next branch, otherwise they can be targeted at master branch. The +iproute2 net-next branch will get merged into the master branch after +the current iproute2 version from master has been released. + +Like BPF, the patches end up in patchwork under the netdev project and +are delegated to 'shemminger' for further processing: + + http://patchwork.ozlabs.org/project/netdev/list/?delegate=389 + +Q: What is the minimum requirement before I submit my BPF patches? +------------------------------------------------------------------ +A: When submitting patches, always take the time and properly test your +patches *prior* to submission. Never rush them! If maintainers find +that your patches have not been properly tested, it is a good way to +get them grumpy. Testing patch submissions is a hard requirement! + +Note, fixes that go to bpf tree *must* have a ``Fixes:`` tag included. +The same applies to fixes that target bpf-next, where the affected +commit is in net-next (or in some cases bpf-next). The ``Fixes:`` tag is +crucial in order to identify follow-up commits and tremendously helps +for people having to do backporting, so it is a must have! + +We also don't accept patches with an empty commit message. Take your +time and properly write up a high quality commit message, it is +essential! + +Think about it this way: other developers looking at your code a month +from now need to understand *why* a certain change has been done that +way, and whether there have been flaws in the analysis or assumptions +that the original author did. Thus providing a proper rationale and +describing the use-case for the changes is a must. + +Patch submissions with >1 patch must have a cover letter which includes +a high level description of the series. This high level summary will +then be placed into the merge commit by the BPF maintainers such that +it is also accessible from the git log for future reference. + +Q: Features changing BPF JIT and/or LLVM +---------------------------------------- +Q: What do I need to consider when adding a new instruction or feature +that would require BPF JIT and/or LLVM integration as well? + +A: We try hard to keep all BPF JITs up to date such that the same user +experience can be guaranteed when running BPF programs on different +architectures without having the program punt to the less efficient +interpreter in case the in-kernel BPF JIT is enabled. + +If you are unable to implement or test the required JIT changes for +certain architectures, please work together with the related BPF JIT +developers in order to get the feature implemented in a timely manner. +Please refer to the git log (``arch/*/net/``) to locate the necessary +people for helping out. + +Also always make sure to add BPF test cases (e.g. test_bpf.c and +test_verifier.c) for new instructions, so that they can receive +broad test coverage and help run-time testing the various BPF JITs. + +In case of new BPF instructions, once the changes have been accepted +into the Linux kernel, please implement support into LLVM's BPF back +end. See LLVM_ section below for further information. + +Stable submission +================= + +Q: I need a specific BPF commit in stable kernels. What should I do? +-------------------------------------------------------------------- +A: In case you need a specific fix in stable kernels, first check whether +the commit has already been applied in the related ``linux-*.y`` branches: + + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/ + +If not the case, then drop an email to the BPF maintainers with the +netdev kernel mailing list in Cc and ask for the fix to be queued up: + + netdev@vger.kernel.org + +The process in general is the same as on netdev itself, see also the +:ref:`netdev-FAQ`. + +Q: Do you also backport to kernels not currently maintained as stable? +---------------------------------------------------------------------- +A: No. If you need a specific BPF commit in kernels that are currently not +maintained by the stable maintainers, then you are on your own. + +The current stable and longterm stable kernels are all listed here: + + https://www.kernel.org/ + +Q: The BPF patch I am about to submit needs to go to stable as well +------------------------------------------------------------------- +What should I do? + +A: The same rules apply as with netdev patch submissions in general, see +the :ref:`netdev-FAQ`. + +Never add "``Cc: stable@vger.kernel.org``" to the patch description, but +ask the BPF maintainers to queue the patches instead. This can be done +with a note, for example, under the ``---`` part of the patch which does +not go into the git log. Alternatively, this can be done as a simple +request by mail instead. + +Q: Queue stable patches +----------------------- +Q: Where do I find currently queued BPF patches that will be submitted +to stable? + +A: Once patches that fix critical bugs got applied into the bpf tree, they +are queued up for stable submission under: + + http://patchwork.ozlabs.org/bundle/bpf/stable/?state=* + +They will be on hold there at minimum until the related commit made its +way into the mainline kernel tree. + +After having been under broader exposure, the queued patches will be +submitted by the BPF maintainers to the stable maintainers. + +Testing patches +=============== + +Q: How to run BPF selftests +--------------------------- +A: After you have booted into the newly compiled kernel, navigate to +the BPF selftests_ suite in order to test BPF functionality (current +working directory points to the root of the cloned git tree):: + + $ cd tools/testing/selftests/bpf/ + $ make + +To run the verifier tests:: + + $ sudo ./test_verifier + +The verifier tests print out all the current checks being +performed. The summary at the end of running all tests will dump +information of test successes and failures:: + + Summary: 418 PASSED, 0 FAILED + +In order to run through all BPF selftests, the following command is +needed:: + + $ sudo make run_tests + +See the kernels selftest `Documentation/dev-tools/kselftest.rst`_ +document for further documentation. + +To maximize the number of tests passing, the .config of the kernel +under test should match the config file fragment in +tools/testing/selftests/bpf as closely as possible. + +Finally to ensure support for latest BPF Type Format features - +discussed in `Documentation/bpf/btf.rst`_ - pahole version 1.16 +is required for kernels built with CONFIG_DEBUG_INFO_BTF=y. +pahole is delivered in the dwarves package or can be built +from source at + +https://github.com/acmel/dwarves + +pahole starts to use libbpf definitions and APIs since v1.13 after the +commit 21507cd3e97b ("pahole: add libbpf as submodule under lib/bpf"). +It works well with the git repository because the libbpf submodule will +use "git submodule update --init --recursive" to update. + +Unfortunately, the default github release source code does not contain +libbpf submodule source code and this will cause build issues, the tarball +from https://git.kernel.org/pub/scm/devel/pahole/pahole.git/ is same with +github, you can get the source tarball with corresponding libbpf submodule +codes from + +https://fedorapeople.org/~acme/dwarves + +Some distros have pahole version 1.16 packaged already, e.g. +Fedora, Gentoo. + +Q: Which BPF kernel selftests version should I run my kernel against? +--------------------------------------------------------------------- +A: If you run a kernel ``xyz``, then always run the BPF kernel selftests +from that kernel ``xyz`` as well. Do not expect that the BPF selftest +from the latest mainline tree will pass all the time. + +In particular, test_bpf.c and test_verifier.c have a large number of +test cases and are constantly updated with new BPF test sequences, or +existing ones are adapted to verifier changes e.g. due to verifier +becoming smarter and being able to better track certain things. + +LLVM +==== + +Q: Where do I find LLVM with BPF support? +----------------------------------------- +A: The BPF back end for LLVM is upstream in LLVM since version 3.7.1. + +All major distributions these days ship LLVM with BPF back end enabled, +so for the majority of use-cases it is not required to compile LLVM by +hand anymore, just install the distribution provided package. + +LLVM's static compiler lists the supported targets through +``llc --version``, make sure BPF targets are listed. Example:: + + $ llc --version + LLVM (http://llvm.org/): + LLVM version 10.0.0 + Optimized build. + Default target: x86_64-unknown-linux-gnu + Host CPU: skylake + + Registered Targets: + aarch64 - AArch64 (little endian) + bpf - BPF (host endian) + bpfeb - BPF (big endian) + bpfel - BPF (little endian) + x86 - 32-bit X86: Pentium-Pro and above + x86-64 - 64-bit X86: EM64T and AMD64 + +For developers in order to utilize the latest features added to LLVM's +BPF back end, it is advisable to run the latest LLVM releases. Support +for new BPF kernel features such as additions to the BPF instruction +set are often developed together. + +All LLVM releases can be found at: http://releases.llvm.org/ + +Q: Got it, so how do I build LLVM manually anyway? +-------------------------------------------------- +A: We recommend that developers who want the fastest incremental builds +use the Ninja build system, you can find it in your system's package +manager, usually the package is ninja or ninja-build. + +You need ninja, cmake and gcc-c++ as build requisites for LLVM. Once you +have that set up, proceed with building the latest LLVM and clang version +from the git repositories:: + + $ git clone https://github.com/llvm/llvm-project.git + $ mkdir -p llvm-project/llvm/build + $ cd llvm-project/llvm/build + $ cmake .. -G "Ninja" -DLLVM_TARGETS_TO_BUILD="BPF;X86" \ + -DLLVM_ENABLE_PROJECTS="clang" \ + -DCMAKE_BUILD_TYPE=Release \ + -DLLVM_BUILD_RUNTIME=OFF + $ ninja + +The built binaries can then be found in the build/bin/ directory, where +you can point the PATH variable to. + +Set ``-DLLVM_TARGETS_TO_BUILD`` equal to the target you wish to build, you +will find a full list of targets within the llvm-project/llvm/lib/Target +directory. + +Q: Reporting LLVM BPF issues +---------------------------- +Q: Should I notify BPF kernel maintainers about issues in LLVM's BPF code +generation back end or about LLVM generated code that the verifier +refuses to accept? + +A: Yes, please do! + +LLVM's BPF back end is a key piece of the whole BPF +infrastructure and it ties deeply into verification of programs from the +kernel side. Therefore, any issues on either side need to be investigated +and fixed whenever necessary. + +Therefore, please make sure to bring them up at netdev kernel mailing +list and Cc BPF maintainers for LLVM and kernel bits: + +* Yonghong Song <yhs@fb.com> +* Alexei Starovoitov <ast@kernel.org> +* Daniel Borkmann <daniel@iogearbox.net> + +LLVM also has an issue tracker where BPF related bugs can be found: + + https://bugs.llvm.org/buglist.cgi?quicksearch=bpf + +However, it is better to reach out through mailing lists with having +maintainers in Cc. + +Q: New BPF instruction for kernel and LLVM +------------------------------------------ +Q: I have added a new BPF instruction to the kernel, how can I integrate +it into LLVM? + +A: LLVM has a ``-mcpu`` selector for the BPF back end in order to allow +the selection of BPF instruction set extensions. By default the +``generic`` processor target is used, which is the base instruction set +(v1) of BPF. + +LLVM has an option to select ``-mcpu=probe`` where it will probe the host +kernel for supported BPF instruction set extensions and selects the +optimal set automatically. + +For cross-compilation, a specific version can be select manually as well :: + + $ llc -march bpf -mcpu=help + Available CPUs for this target: + + generic - Select the generic processor. + probe - Select the probe processor. + v1 - Select the v1 processor. + v2 - Select the v2 processor. + [...] + +Newly added BPF instructions to the Linux kernel need to follow the same +scheme, bump the instruction set version and implement probing for the +extensions such that ``-mcpu=probe`` users can benefit from the +optimization transparently when upgrading their kernels. + +If you are unable to implement support for the newly added BPF instruction +please reach out to BPF developers for help. + +By the way, the BPF kernel selftests run with ``-mcpu=probe`` for better +test coverage. + +Q: clang flag for target bpf? +----------------------------- +Q: In some cases clang flag ``-target bpf`` is used but in other cases the +default clang target, which matches the underlying architecture, is used. +What is the difference and when I should use which? + +A: Although LLVM IR generation and optimization try to stay architecture +independent, ``-target <arch>`` still has some impact on generated code: + +- BPF program may recursively include header file(s) with file scope + inline assembly codes. The default target can handle this well, + while ``bpf`` target may fail if bpf backend assembler does not + understand these assembly codes, which is true in most cases. + +- When compiled without ``-g``, additional elf sections, e.g., + .eh_frame and .rela.eh_frame, may be present in the object file + with default target, but not with ``bpf`` target. + +- The default target may turn a C switch statement into a switch table + lookup and jump operation. Since the switch table is placed + in the global readonly section, the bpf program will fail to load. + The bpf target does not support switch table optimization. + The clang option ``-fno-jump-tables`` can be used to disable + switch table generation. + +- For clang ``-target bpf``, it is guaranteed that pointer or long / + unsigned long types will always have a width of 64 bit, no matter + whether underlying clang binary or default target (or kernel) is + 32 bit. However, when native clang target is used, then it will + compile these types based on the underlying architecture's conventions, + meaning in case of 32 bit architecture, pointer or long / unsigned + long types e.g. in BPF context structure will have width of 32 bit + while the BPF LLVM back end still operates in 64 bit. The native + target is mostly needed in tracing for the case of walking ``pt_regs`` + or other kernel structures where CPU's register width matters. + Otherwise, ``clang -target bpf`` is generally recommended. + +You should use default target when: + +- Your program includes a header file, e.g., ptrace.h, which eventually + pulls in some header files containing file scope host assembly codes. + +- You can add ``-fno-jump-tables`` to work around the switch table issue. + +Otherwise, you can use ``bpf`` target. Additionally, you *must* use bpf target +when: + +- Your program uses data structures with pointer or long / unsigned long + types that interface with BPF helpers or context data structures. Access + into these structures is verified by the BPF verifier and may result + in verification failures if the native architecture is not aligned with + the BPF architecture, e.g. 64-bit. An example of this is + BPF_PROG_TYPE_SK_MSG require ``-target bpf`` + + +.. Links +.. _Documentation/process/: https://www.kernel.org/doc/html/latest/process/ +.. _netdev-FAQ: Documentation/process/maintainer-netdev.rst +.. _selftests: + https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/ +.. _Documentation/dev-tools/kselftest.rst: + https://www.kernel.org/doc/html/latest/dev-tools/kselftest.html +.. _Documentation/bpf/btf.rst: btf.rst + +Happy BPF hacking! diff --git a/Documentation/bpf/bpf_licensing.rst b/Documentation/bpf/bpf_licensing.rst new file mode 100644 index 000000000..b19c433f4 --- /dev/null +++ b/Documentation/bpf/bpf_licensing.rst @@ -0,0 +1,92 @@ +============= +BPF licensing +============= + +Background +========== + +* Classic BPF was BSD licensed + +"BPF" was originally introduced as BSD Packet Filter in +http://www.tcpdump.org/papers/bpf-usenix93.pdf. The corresponding instruction +set and its implementation came from BSD with BSD license. That original +instruction set is now known as "classic BPF". + +However an instruction set is a specification for machine-language interaction, +similar to a programming language. It is not a code. Therefore, the +application of a BSD license may be misleading in a certain context, as the +instruction set may enjoy no copyright protection. + +* eBPF (extended BPF) instruction set continues to be BSD + +In 2014, the classic BPF instruction set was significantly extended. We +typically refer to this instruction set as eBPF to disambiguate it from cBPF. +The eBPF instruction set is still BSD licensed. + +Implementations of eBPF +======================= + +Using the eBPF instruction set requires implementing code in both kernel space +and user space. + +In Linux Kernel +--------------- + +The reference implementations of the eBPF interpreter and various just-in-time +compilers are part of Linux and are GPLv2 licensed. The implementation of +eBPF helper functions is also GPLv2 licensed. Interpreters, JITs, helpers, +and verifiers are called eBPF runtime. + +In User Space +------------- + +There are also implementations of eBPF runtime (interpreter, JITs, helper +functions) under +Apache2 (https://github.com/iovisor/ubpf), +MIT (https://github.com/qmonnet/rbpf), and +BSD (https://github.com/DPDK/dpdk/blob/main/lib/librte_bpf). + +In HW +----- + +The HW can choose to execute eBPF instruction natively and provide eBPF runtime +in HW or via the use of implementing firmware with a proprietary license. + +In other operating systems +-------------------------- + +Other kernels or user space implementations of eBPF instruction set and runtime +can have proprietary licenses. + +Using BPF programs in the Linux kernel +====================================== + +Linux Kernel (while being GPLv2) allows linking of proprietary kernel modules +under these rules: +Documentation/process/license-rules.rst + +When a kernel module is loaded, the linux kernel checks which functions it +intends to use. If any function is marked as "GPL only," the corresponding +module or program has to have GPL compatible license. + +Loading BPF program into the Linux kernel is similar to loading a kernel +module. BPF is loaded at run time and not statically linked to the Linux +kernel. BPF program loading follows the same license checking rules as kernel +modules. BPF programs can be proprietary if they don't use "GPL only" BPF +helper functions. + +Further, some BPF program types - Linux Security Modules (LSM) and TCP +Congestion Control (struct_ops), as of Aug 2021 - are required to be GPL +compatible even if they don't use "GPL only" helper functions directly. The +registration step of LSM and TCP congestion control modules of the Linux +kernel is done through EXPORT_SYMBOL_GPL kernel functions. In that sense LSM +and struct_ops BPF programs are implicitly calling "GPL only" functions. +The same restriction applies to BPF programs that call kernel functions +directly via unstable interface also known as "kfunc". + +Packaging BPF programs with user space applications +==================================================== + +Generally, proprietary-licensed applications and GPL licensed BPF programs +written for the Linux kernel in the same package can co-exist because they are +separate executable processes. This applies to both cBPF and eBPF programs. diff --git a/Documentation/bpf/bpf_prog_run.rst b/Documentation/bpf/bpf_prog_run.rst new file mode 100644 index 000000000..4868c909d --- /dev/null +++ b/Documentation/bpf/bpf_prog_run.rst @@ -0,0 +1,117 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +Running BPF programs from userspace +=================================== + +This document describes the ``BPF_PROG_RUN`` facility for running BPF programs +from userspace. + +.. contents:: + :local: + :depth: 2 + + +Overview +-------- + +The ``BPF_PROG_RUN`` command can be used through the ``bpf()`` syscall to +execute a BPF program in the kernel and return the results to userspace. This +can be used to unit test BPF programs against user-supplied context objects, and +as way to explicitly execute programs in the kernel for their side effects. The +command was previously named ``BPF_PROG_TEST_RUN``, and both constants continue +to be defined in the UAPI header, aliased to the same value. + +The ``BPF_PROG_RUN`` command can be used to execute BPF programs of the +following types: + +- ``BPF_PROG_TYPE_SOCKET_FILTER`` +- ``BPF_PROG_TYPE_SCHED_CLS`` +- ``BPF_PROG_TYPE_SCHED_ACT`` +- ``BPF_PROG_TYPE_XDP`` +- ``BPF_PROG_TYPE_SK_LOOKUP`` +- ``BPF_PROG_TYPE_CGROUP_SKB`` +- ``BPF_PROG_TYPE_LWT_IN`` +- ``BPF_PROG_TYPE_LWT_OUT`` +- ``BPF_PROG_TYPE_LWT_XMIT`` +- ``BPF_PROG_TYPE_LWT_SEG6LOCAL`` +- ``BPF_PROG_TYPE_FLOW_DISSECTOR`` +- ``BPF_PROG_TYPE_STRUCT_OPS`` +- ``BPF_PROG_TYPE_RAW_TRACEPOINT`` +- ``BPF_PROG_TYPE_SYSCALL`` + +When using the ``BPF_PROG_RUN`` command, userspace supplies an input context +object and (for program types operating on network packets) a buffer containing +the packet data that the BPF program will operate on. The kernel will then +execute the program and return the results to userspace. Note that programs will +not have any side effects while being run in this mode; in particular, packets +will not actually be redirected or dropped, the program return code will just be +returned to userspace. A separate mode for live execution of XDP programs is +provided, documented separately below. + +Running XDP programs in "live frame mode" +----------------------------------------- + +The ``BPF_PROG_RUN`` command has a separate mode for running live XDP programs, +which can be used to execute XDP programs in a way where packets will actually +be processed by the kernel after the execution of the XDP program as if they +arrived on a physical interface. This mode is activated by setting the +``BPF_F_TEST_XDP_LIVE_FRAMES`` flag when supplying an XDP program to +``BPF_PROG_RUN``. + +The live packet mode is optimised for high performance execution of the supplied +XDP program many times (suitable for, e.g., running as a traffic generator), +which means the semantics are not quite as straight-forward as the regular test +run mode. Specifically: + +- When executing an XDP program in live frame mode, the result of the execution + will not be returned to userspace; instead, the kernel will perform the + operation indicated by the program's return code (drop the packet, redirect + it, etc). For this reason, setting the ``data_out`` or ``ctx_out`` attributes + in the syscall parameters when running in this mode will be rejected. In + addition, not all failures will be reported back to userspace directly; + specifically, only fatal errors in setup or during execution (like memory + allocation errors) will halt execution and return an error. If an error occurs + in packet processing, like a failure to redirect to a given interface, + execution will continue with the next repetition; these errors can be detected + via the same trace points as for regular XDP programs. + +- Userspace can supply an ifindex as part of the context object, just like in + the regular (non-live) mode. The XDP program will be executed as though the + packet arrived on this interface; i.e., the ``ingress_ifindex`` of the context + object will point to that interface. Furthermore, if the XDP program returns + ``XDP_PASS``, the packet will be injected into the kernel networking stack as + though it arrived on that ifindex, and if it returns ``XDP_TX``, the packet + will be transmitted *out* of that same interface. Do note, though, that + because the program execution is not happening in driver context, an + ``XDP_TX`` is actually turned into the same action as an ``XDP_REDIRECT`` to + that same interface (i.e., it will only work if the driver has support for the + ``ndo_xdp_xmit`` driver op). + +- When running the program with multiple repetitions, the execution will happen + in batches. The batch size defaults to 64 packets (which is same as the + maximum NAPI receive batch size), but can be specified by userspace through + the ``batch_size`` parameter, up to a maximum of 256 packets. For each batch, + the kernel executes the XDP program repeatedly, each invocation getting a + separate copy of the packet data. For each repetition, if the program drops + the packet, the data page is immediately recycled (see below). Otherwise, the + packet is buffered until the end of the batch, at which point all packets + buffered this way during the batch are transmitted at once. + +- When setting up the test run, the kernel will initialise a pool of memory + pages of the same size as the batch size. Each memory page will be initialised + with the initial packet data supplied by userspace at ``BPF_PROG_RUN`` + invocation. When possible, the pages will be recycled on future program + invocations, to improve performance. Pages will generally be recycled a full + batch at a time, except when a packet is dropped (by return code or because + of, say, a redirection error), in which case that page will be recycled + immediately. If a packet ends up being passed to the regular networking stack + (because the XDP program returns ``XDP_PASS``, or because it ends up being + redirected to an interface that injects it into the stack), the page will be + released and a new one will be allocated when the pool is empty. + + When recycling, the page content is not rewritten; only the packet boundary + pointers (``data``, ``data_end`` and ``data_meta``) in the context object will + be reset to the original values. This means that if a program rewrites the + packet contents, it has to be prepared to see either the original content or + the modified version on subsequent invocations. diff --git a/Documentation/bpf/btf.rst b/Documentation/bpf/btf.rst new file mode 100644 index 000000000..cf8722f96 --- /dev/null +++ b/Documentation/bpf/btf.rst @@ -0,0 +1,1065 @@ +===================== +BPF Type Format (BTF) +===================== + +1. Introduction +=============== + +BTF (BPF Type Format) is the metadata format which encodes the debug info +related to BPF program/map. The name BTF was used initially to describe data +types. The BTF was later extended to include function info for defined +subroutines, and line info for source/line information. + +The debug info is used for map pretty print, function signature, etc. The +function signature enables better bpf program/function kernel symbol. The line +info helps generate source annotated translated byte code, jited code and +verifier log. + +The BTF specification contains two parts, + * BTF kernel API + * BTF ELF file format + +The kernel API is the contract between user space and kernel. The kernel +verifies the BTF info before using it. The ELF file format is a user space +contract between ELF file and libbpf loader. + +The type and string sections are part of the BTF kernel API, describing the +debug info (mostly types related) referenced by the bpf program. These two +sections are discussed in details in :ref:`BTF_Type_String`. + +.. _BTF_Type_String: + +2. BTF Type and String Encoding +=============================== + +The file ``include/uapi/linux/btf.h`` provides high-level definition of how +types/strings are encoded. + +The beginning of data blob must be:: + + struct btf_header { + __u16 magic; + __u8 version; + __u8 flags; + __u32 hdr_len; + + /* All offsets are in bytes relative to the end of this header */ + __u32 type_off; /* offset of type section */ + __u32 type_len; /* length of type section */ + __u32 str_off; /* offset of string section */ + __u32 str_len; /* length of string section */ + }; + +The magic is ``0xeB9F``, which has different encoding for big and little +endian systems, and can be used to test whether BTF is generated for big- or +little-endian target. The ``btf_header`` is designed to be extensible with +``hdr_len`` equal to ``sizeof(struct btf_header)`` when a data blob is +generated. + +2.1 String Encoding +------------------- + +The first string in the string section must be a null string. The rest of +string table is a concatenation of other null-terminated strings. + +2.2 Type Encoding +----------------- + +The type id ``0`` is reserved for ``void`` type. The type section is parsed +sequentially and type id is assigned to each recognized type starting from id +``1``. Currently, the following types are supported:: + + #define BTF_KIND_INT 1 /* Integer */ + #define BTF_KIND_PTR 2 /* Pointer */ + #define BTF_KIND_ARRAY 3 /* Array */ + #define BTF_KIND_STRUCT 4 /* Struct */ + #define BTF_KIND_UNION 5 /* Union */ + #define BTF_KIND_ENUM 6 /* Enumeration up to 32-bit values */ + #define BTF_KIND_FWD 7 /* Forward */ + #define BTF_KIND_TYPEDEF 8 /* Typedef */ + #define BTF_KIND_VOLATILE 9 /* Volatile */ + #define BTF_KIND_CONST 10 /* Const */ + #define BTF_KIND_RESTRICT 11 /* Restrict */ + #define BTF_KIND_FUNC 12 /* Function */ + #define BTF_KIND_FUNC_PROTO 13 /* Function Proto */ + #define BTF_KIND_VAR 14 /* Variable */ + #define BTF_KIND_DATASEC 15 /* Section */ + #define BTF_KIND_FLOAT 16 /* Floating point */ + #define BTF_KIND_DECL_TAG 17 /* Decl Tag */ + #define BTF_KIND_TYPE_TAG 18 /* Type Tag */ + #define BTF_KIND_ENUM64 19 /* Enumeration up to 64-bit values */ + +Note that the type section encodes debug info, not just pure types. +``BTF_KIND_FUNC`` is not a type, and it represents a defined subprogram. + +Each type contains the following common data:: + + struct btf_type { + __u32 name_off; + /* "info" bits arrangement + * bits 0-15: vlen (e.g. # of struct's members) + * bits 16-23: unused + * bits 24-28: kind (e.g. int, ptr, array...etc) + * bits 29-30: unused + * bit 31: kind_flag, currently used by + * struct, union, fwd, enum and enum64. + */ + __u32 info; + /* "size" is used by INT, ENUM, STRUCT, UNION and ENUM64. + * "size" tells the size of the type it is describing. + * + * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, + * FUNC, FUNC_PROTO, DECL_TAG and TYPE_TAG. + * "type" is a type_id referring to another type. + */ + union { + __u32 size; + __u32 type; + }; + }; + +For certain kinds, the common data are followed by kind-specific data. The +``name_off`` in ``struct btf_type`` specifies the offset in the string table. +The following sections detail encoding of each kind. + +2.2.1 BTF_KIND_INT +~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: any valid offset + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_INT + * ``info.vlen``: 0 + * ``size``: the size of the int type in bytes. + +``btf_type`` is followed by a ``u32`` with the following bits arrangement:: + + #define BTF_INT_ENCODING(VAL) (((VAL) & 0x0f000000) >> 24) + #define BTF_INT_OFFSET(VAL) (((VAL) & 0x00ff0000) >> 16) + #define BTF_INT_BITS(VAL) ((VAL) & 0x000000ff) + +The ``BTF_INT_ENCODING`` has the following attributes:: + + #define BTF_INT_SIGNED (1 << 0) + #define BTF_INT_CHAR (1 << 1) + #define BTF_INT_BOOL (1 << 2) + +The ``BTF_INT_ENCODING()`` provides extra information: signedness, char, or +bool, for the int type. The char and bool encoding are mostly useful for +pretty print. At most one encoding can be specified for the int type. + +The ``BTF_INT_BITS()`` specifies the number of actual bits held by this int +type. For example, a 4-bit bitfield encodes ``BTF_INT_BITS()`` equals to 4. +The ``btf_type.size * 8`` must be equal to or greater than ``BTF_INT_BITS()`` +for the type. The maximum value of ``BTF_INT_BITS()`` is 128. + +The ``BTF_INT_OFFSET()`` specifies the starting bit offset to calculate values +for this int. For example, a bitfield struct member has: + + * btf member bit offset 100 from the start of the structure, + * btf member pointing to an int type, + * the int type has ``BTF_INT_OFFSET() = 2`` and ``BTF_INT_BITS() = 4`` + +Then in the struct memory layout, this member will occupy ``4`` bits starting +from bits ``100 + 2 = 102``. + +Alternatively, the bitfield struct member can be the following to access the +same bits as the above: + + * btf member bit offset 102, + * btf member pointing to an int type, + * the int type has ``BTF_INT_OFFSET() = 0`` and ``BTF_INT_BITS() = 4`` + +The original intention of ``BTF_INT_OFFSET()`` is to provide flexibility of +bitfield encoding. Currently, both llvm and pahole generate +``BTF_INT_OFFSET() = 0`` for all int types. + +2.2.2 BTF_KIND_PTR +~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: 0 + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_PTR + * ``info.vlen``: 0 + * ``type``: the pointee type of the pointer + +No additional type data follow ``btf_type``. + +2.2.3 BTF_KIND_ARRAY +~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: 0 + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_ARRAY + * ``info.vlen``: 0 + * ``size/type``: 0, not used + +``btf_type`` is followed by one ``struct btf_array``:: + + struct btf_array { + __u32 type; + __u32 index_type; + __u32 nelems; + }; + +The ``struct btf_array`` encoding: + * ``type``: the element type + * ``index_type``: the index type + * ``nelems``: the number of elements for this array (``0`` is also allowed). + +The ``index_type`` can be any regular int type (``u8``, ``u16``, ``u32``, +``u64``, ``unsigned __int128``). The original design of including +``index_type`` follows DWARF, which has an ``index_type`` for its array type. +Currently in BTF, beyond type verification, the ``index_type`` is not used. + +The ``struct btf_array`` allows chaining through element type to represent +multidimensional arrays. For example, for ``int a[5][6]``, the following type +information illustrates the chaining: + + * [1]: int + * [2]: array, ``btf_array.type = [1]``, ``btf_array.nelems = 6`` + * [3]: array, ``btf_array.type = [2]``, ``btf_array.nelems = 5`` + +Currently, both pahole and llvm collapse multidimensional array into +one-dimensional array, e.g., for ``a[5][6]``, the ``btf_array.nelems`` is +equal to ``30``. This is because the original use case is map pretty print +where the whole array is dumped out so one-dimensional array is enough. As +more BTF usage is explored, pahole and llvm can be changed to generate proper +chained representation for multidimensional arrays. + +2.2.4 BTF_KIND_STRUCT +~~~~~~~~~~~~~~~~~~~~~ +2.2.5 BTF_KIND_UNION +~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: 0 or offset to a valid C identifier + * ``info.kind_flag``: 0 or 1 + * ``info.kind``: BTF_KIND_STRUCT or BTF_KIND_UNION + * ``info.vlen``: the number of struct/union members + * ``info.size``: the size of the struct/union in bytes + +``btf_type`` is followed by ``info.vlen`` number of ``struct btf_member``.:: + + struct btf_member { + __u32 name_off; + __u32 type; + __u32 offset; + }; + +``struct btf_member`` encoding: + * ``name_off``: offset to a valid C identifier + * ``type``: the member type + * ``offset``: <see below> + +If the type info ``kind_flag`` is not set, the offset contains only bit offset +of the member. Note that the base type of the bitfield can only be int or enum +type. If the bitfield size is 32, the base type can be either int or enum +type. If the bitfield size is not 32, the base type must be int, and int type +``BTF_INT_BITS()`` encodes the bitfield size. + +If the ``kind_flag`` is set, the ``btf_member.offset`` contains both member +bitfield size and bit offset. The bitfield size and bit offset are calculated +as below.:: + + #define BTF_MEMBER_BITFIELD_SIZE(val) ((val) >> 24) + #define BTF_MEMBER_BIT_OFFSET(val) ((val) & 0xffffff) + +In this case, if the base type is an int type, it must be a regular int type: + + * ``BTF_INT_OFFSET()`` must be 0. + * ``BTF_INT_BITS()`` must be equal to ``{1,2,4,8,16} * 8``. + +The following kernel patch introduced ``kind_flag`` and explained why both +modes exist: + + https://github.com/torvalds/linux/commit/9d5f9f701b1891466fb3dbb1806ad97716f95cc3#diff-fa650a64fdd3968396883d2fe8215ff3 + +2.2.6 BTF_KIND_ENUM +~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: 0 or offset to a valid C identifier + * ``info.kind_flag``: 0 for unsigned, 1 for signed + * ``info.kind``: BTF_KIND_ENUM + * ``info.vlen``: number of enum values + * ``size``: 1/2/4/8 + +``btf_type`` is followed by ``info.vlen`` number of ``struct btf_enum``.:: + + struct btf_enum { + __u32 name_off; + __s32 val; + }; + +The ``btf_enum`` encoding: + * ``name_off``: offset to a valid C identifier + * ``val``: any value + +If the original enum value is signed and the size is less than 4, +that value will be sign extended into 4 bytes. If the size is 8, +the value will be truncated into 4 bytes. + +2.2.7 BTF_KIND_FWD +~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: offset to a valid C identifier + * ``info.kind_flag``: 0 for struct, 1 for union + * ``info.kind``: BTF_KIND_FWD + * ``info.vlen``: 0 + * ``type``: 0 + +No additional type data follow ``btf_type``. + +2.2.8 BTF_KIND_TYPEDEF +~~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: offset to a valid C identifier + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_TYPEDEF + * ``info.vlen``: 0 + * ``type``: the type which can be referred by name at ``name_off`` + +No additional type data follow ``btf_type``. + +2.2.9 BTF_KIND_VOLATILE +~~~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: 0 + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_VOLATILE + * ``info.vlen``: 0 + * ``type``: the type with ``volatile`` qualifier + +No additional type data follow ``btf_type``. + +2.2.10 BTF_KIND_CONST +~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: 0 + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_CONST + * ``info.vlen``: 0 + * ``type``: the type with ``const`` qualifier + +No additional type data follow ``btf_type``. + +2.2.11 BTF_KIND_RESTRICT +~~~~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: 0 + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_RESTRICT + * ``info.vlen``: 0 + * ``type``: the type with ``restrict`` qualifier + +No additional type data follow ``btf_type``. + +2.2.12 BTF_KIND_FUNC +~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: offset to a valid C identifier + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_FUNC + * ``info.vlen``: linkage information (BTF_FUNC_STATIC, BTF_FUNC_GLOBAL + or BTF_FUNC_EXTERN) + * ``type``: a BTF_KIND_FUNC_PROTO type + +No additional type data follow ``btf_type``. + +A BTF_KIND_FUNC defines not a type, but a subprogram (function) whose +signature is defined by ``type``. The subprogram is thus an instance of that +type. The BTF_KIND_FUNC may in turn be referenced by a func_info in the +:ref:`BTF_Ext_Section` (ELF) or in the arguments to :ref:`BPF_Prog_Load` +(ABI). + +Currently, only linkage values of BTF_FUNC_STATIC and BTF_FUNC_GLOBAL are +supported in the kernel. + +2.2.13 BTF_KIND_FUNC_PROTO +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: 0 + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_FUNC_PROTO + * ``info.vlen``: # of parameters + * ``type``: the return type + +``btf_type`` is followed by ``info.vlen`` number of ``struct btf_param``.:: + + struct btf_param { + __u32 name_off; + __u32 type; + }; + +If a BTF_KIND_FUNC_PROTO type is referred by a BTF_KIND_FUNC type, then +``btf_param.name_off`` must point to a valid C identifier except for the +possible last argument representing the variable argument. The btf_param.type +refers to parameter type. + +If the function has variable arguments, the last parameter is encoded with +``name_off = 0`` and ``type = 0``. + +2.2.14 BTF_KIND_VAR +~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: offset to a valid C identifier + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_VAR + * ``info.vlen``: 0 + * ``type``: the type of the variable + +``btf_type`` is followed by a single ``struct btf_variable`` with the +following data:: + + struct btf_var { + __u32 linkage; + }; + +``struct btf_var`` encoding: + * ``linkage``: currently only static variable 0, or globally allocated + variable in ELF sections 1 + +Not all type of global variables are supported by LLVM at this point. +The following is currently available: + + * static variables with or without section attributes + * global variables with section attributes + +The latter is for future extraction of map key/value type id's from a +map definition. + +2.2.15 BTF_KIND_DATASEC +~~~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: offset to a valid name associated with a variable or + one of .data/.bss/.rodata + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_DATASEC + * ``info.vlen``: # of variables + * ``size``: total section size in bytes (0 at compilation time, patched + to actual size by BPF loaders such as libbpf) + +``btf_type`` is followed by ``info.vlen`` number of ``struct btf_var_secinfo``.:: + + struct btf_var_secinfo { + __u32 type; + __u32 offset; + __u32 size; + }; + +``struct btf_var_secinfo`` encoding: + * ``type``: the type of the BTF_KIND_VAR variable + * ``offset``: the in-section offset of the variable + * ``size``: the size of the variable in bytes + +2.2.16 BTF_KIND_FLOAT +~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: any valid offset + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_FLOAT + * ``info.vlen``: 0 + * ``size``: the size of the float type in bytes: 2, 4, 8, 12 or 16. + +No additional type data follow ``btf_type``. + +2.2.17 BTF_KIND_DECL_TAG +~~~~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: offset to a non-empty string + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_DECL_TAG + * ``info.vlen``: 0 + * ``type``: ``struct``, ``union``, ``func``, ``var`` or ``typedef`` + +``btf_type`` is followed by ``struct btf_decl_tag``.:: + + struct btf_decl_tag { + __u32 component_idx; + }; + +The ``name_off`` encodes btf_decl_tag attribute string. +The ``type`` should be ``struct``, ``union``, ``func``, ``var`` or ``typedef``. +For ``var`` or ``typedef`` type, ``btf_decl_tag.component_idx`` must be ``-1``. +For the other three types, if the btf_decl_tag attribute is +applied to the ``struct``, ``union`` or ``func`` itself, +``btf_decl_tag.component_idx`` must be ``-1``. Otherwise, +the attribute is applied to a ``struct``/``union`` member or +a ``func`` argument, and ``btf_decl_tag.component_idx`` should be a +valid index (starting from 0) pointing to a member or an argument. + +2.2.18 BTF_KIND_TYPE_TAG +~~~~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: offset to a non-empty string + * ``info.kind_flag``: 0 + * ``info.kind``: BTF_KIND_TYPE_TAG + * ``info.vlen``: 0 + * ``type``: the type with ``btf_type_tag`` attribute + +Currently, ``BTF_KIND_TYPE_TAG`` is only emitted for pointer types. +It has the following btf type chain: +:: + + ptr -> [type_tag]* + -> [const | volatile | restrict | typedef]* + -> base_type + +Basically, a pointer type points to zero or more +type_tag, then zero or more const/volatile/restrict/typedef +and finally the base type. The base type is one of +int, ptr, array, struct, union, enum, func_proto and float types. + +2.2.19 BTF_KIND_ENUM64 +~~~~~~~~~~~~~~~~~~~~~~ + +``struct btf_type`` encoding requirement: + * ``name_off``: 0 or offset to a valid C identifier + * ``info.kind_flag``: 0 for unsigned, 1 for signed + * ``info.kind``: BTF_KIND_ENUM64 + * ``info.vlen``: number of enum values + * ``size``: 1/2/4/8 + +``btf_type`` is followed by ``info.vlen`` number of ``struct btf_enum64``.:: + + struct btf_enum64 { + __u32 name_off; + __u32 val_lo32; + __u32 val_hi32; + }; + +The ``btf_enum64`` encoding: + * ``name_off``: offset to a valid C identifier + * ``val_lo32``: lower 32-bit value for a 64-bit value + * ``val_hi32``: high 32-bit value for a 64-bit value + +If the original enum value is signed and the size is less than 8, +that value will be sign extended into 8 bytes. + +3. BTF Kernel API +================= + +The following bpf syscall command involves BTF: + * BPF_BTF_LOAD: load a blob of BTF data into kernel + * BPF_MAP_CREATE: map creation with btf key and value type info. + * BPF_PROG_LOAD: prog load with btf function and line info. + * BPF_BTF_GET_FD_BY_ID: get a btf fd + * BPF_OBJ_GET_INFO_BY_FD: btf, func_info, line_info + and other btf related info are returned. + +The workflow typically looks like: +:: + + Application: + BPF_BTF_LOAD + | + v + BPF_MAP_CREATE and BPF_PROG_LOAD + | + V + ...... + + Introspection tool: + ...... + BPF_{PROG,MAP}_GET_NEXT_ID (get prog/map id's) + | + V + BPF_{PROG,MAP}_GET_FD_BY_ID (get a prog/map fd) + | + V + BPF_OBJ_GET_INFO_BY_FD (get bpf_prog_info/bpf_map_info with btf_id) + | | + V | + BPF_BTF_GET_FD_BY_ID (get btf_fd) | + | | + V | + BPF_OBJ_GET_INFO_BY_FD (get btf) | + | | + V V + pretty print types, dump func signatures and line info, etc. + + +3.1 BPF_BTF_LOAD +---------------- + +Load a blob of BTF data into kernel. A blob of data, described in +:ref:`BTF_Type_String`, can be directly loaded into the kernel. A ``btf_fd`` +is returned to a userspace. + +3.2 BPF_MAP_CREATE +------------------ + +A map can be created with ``btf_fd`` and specified key/value type id.:: + + __u32 btf_fd; /* fd pointing to a BTF type data */ + __u32 btf_key_type_id; /* BTF type_id of the key */ + __u32 btf_value_type_id; /* BTF type_id of the value */ + +In libbpf, the map can be defined with extra annotation like below: +:: + + struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __type(key, int); + __type(value, struct ipv_counts); + __uint(max_entries, 4); + } btf_map SEC(".maps"); + +During ELF parsing, libbpf is able to extract key/value type_id's and assign +them to BPF_MAP_CREATE attributes automatically. + +.. _BPF_Prog_Load: + +3.3 BPF_PROG_LOAD +----------------- + +During prog_load, func_info and line_info can be passed to kernel with proper +values for the following attributes: +:: + + __u32 insn_cnt; + __aligned_u64 insns; + ...... + __u32 prog_btf_fd; /* fd pointing to BTF type data */ + __u32 func_info_rec_size; /* userspace bpf_func_info size */ + __aligned_u64 func_info; /* func info */ + __u32 func_info_cnt; /* number of bpf_func_info records */ + __u32 line_info_rec_size; /* userspace bpf_line_info size */ + __aligned_u64 line_info; /* line info */ + __u32 line_info_cnt; /* number of bpf_line_info records */ + +The func_info and line_info are an array of below, respectively.:: + + struct bpf_func_info { + __u32 insn_off; /* [0, insn_cnt - 1] */ + __u32 type_id; /* pointing to a BTF_KIND_FUNC type */ + }; + struct bpf_line_info { + __u32 insn_off; /* [0, insn_cnt - 1] */ + __u32 file_name_off; /* offset to string table for the filename */ + __u32 line_off; /* offset to string table for the source line */ + __u32 line_col; /* line number and column number */ + }; + +func_info_rec_size is the size of each func_info record, and +line_info_rec_size is the size of each line_info record. Passing the record +size to kernel make it possible to extend the record itself in the future. + +Below are requirements for func_info: + * func_info[0].insn_off must be 0. + * the func_info insn_off is in strictly increasing order and matches + bpf func boundaries. + +Below are requirements for line_info: + * the first insn in each func must have a line_info record pointing to it. + * the line_info insn_off is in strictly increasing order. + +For line_info, the line number and column number are defined as below: +:: + + #define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10) + #define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff) + +3.4 BPF_{PROG,MAP}_GET_NEXT_ID +------------------------------ + +In kernel, every loaded program, map or btf has a unique id. The id won't +change during the lifetime of a program, map, or btf. + +The bpf syscall command BPF_{PROG,MAP}_GET_NEXT_ID returns all id's, one for +each command, to user space, for bpf program or maps, respectively, so an +inspection tool can inspect all programs and maps. + +3.5 BPF_{PROG,MAP}_GET_FD_BY_ID +------------------------------- + +An introspection tool cannot use id to get details about program or maps. +A file descriptor needs to be obtained first for reference-counting purpose. + +3.6 BPF_OBJ_GET_INFO_BY_FD +-------------------------- + +Once a program/map fd is acquired, an introspection tool can get the detailed +information from kernel about this fd, some of which are BTF-related. For +example, ``bpf_map_info`` returns ``btf_id`` and key/value type ids. +``bpf_prog_info`` returns ``btf_id``, func_info, and line info for translated +bpf byte codes, and jited_line_info. + +3.7 BPF_BTF_GET_FD_BY_ID +------------------------ + +With ``btf_id`` obtained in ``bpf_map_info`` and ``bpf_prog_info``, bpf +syscall command BPF_BTF_GET_FD_BY_ID can retrieve a btf fd. Then, with +command BPF_OBJ_GET_INFO_BY_FD, the btf blob, originally loaded into the +kernel with BPF_BTF_LOAD, can be retrieved. + +With the btf blob, ``bpf_map_info``, and ``bpf_prog_info``, an introspection +tool has full btf knowledge and is able to pretty print map key/values, dump +func signatures and line info, along with byte/jit codes. + +4. ELF File Format Interface +============================ + +4.1 .BTF section +---------------- + +The .BTF section contains type and string data. The format of this section is +same as the one describe in :ref:`BTF_Type_String`. + +.. _BTF_Ext_Section: + +4.2 .BTF.ext section +-------------------- + +The .BTF.ext section encodes func_info and line_info which needs loader +manipulation before loading into the kernel. + +The specification for .BTF.ext section is defined at ``tools/lib/bpf/btf.h`` +and ``tools/lib/bpf/btf.c``. + +The current header of .BTF.ext section:: + + struct btf_ext_header { + __u16 magic; + __u8 version; + __u8 flags; + __u32 hdr_len; + + /* All offsets are in bytes relative to the end of this header */ + __u32 func_info_off; + __u32 func_info_len; + __u32 line_info_off; + __u32 line_info_len; + }; + +It is very similar to .BTF section. Instead of type/string section, it +contains func_info and line_info section. See :ref:`BPF_Prog_Load` for details +about func_info and line_info record format. + +The func_info is organized as below.:: + + func_info_rec_size + btf_ext_info_sec for section #1 /* func_info for section #1 */ + btf_ext_info_sec for section #2 /* func_info for section #2 */ + ... + +``func_info_rec_size`` specifies the size of ``bpf_func_info`` structure when +.BTF.ext is generated. ``btf_ext_info_sec``, defined below, is a collection of +func_info for each specific ELF section.:: + + struct btf_ext_info_sec { + __u32 sec_name_off; /* offset to section name */ + __u32 num_info; + /* Followed by num_info * record_size number of bytes */ + __u8 data[0]; + }; + +Here, num_info must be greater than 0. + +The line_info is organized as below.:: + + line_info_rec_size + btf_ext_info_sec for section #1 /* line_info for section #1 */ + btf_ext_info_sec for section #2 /* line_info for section #2 */ + ... + +``line_info_rec_size`` specifies the size of ``bpf_line_info`` structure when +.BTF.ext is generated. + +The interpretation of ``bpf_func_info->insn_off`` and +``bpf_line_info->insn_off`` is different between kernel API and ELF API. For +kernel API, the ``insn_off`` is the instruction offset in the unit of ``struct +bpf_insn``. For ELF API, the ``insn_off`` is the byte offset from the +beginning of section (``btf_ext_info_sec->sec_name_off``). + +4.2 .BTF_ids section +-------------------- + +The .BTF_ids section encodes BTF ID values that are used within the kernel. + +This section is created during the kernel compilation with the help of +macros defined in ``include/linux/btf_ids.h`` header file. Kernel code can +use them to create lists and sets (sorted lists) of BTF ID values. + +The ``BTF_ID_LIST`` and ``BTF_ID`` macros define unsorted list of BTF ID values, +with following syntax:: + + BTF_ID_LIST(list) + BTF_ID(type1, name1) + BTF_ID(type2, name2) + +resulting in following layout in .BTF_ids section:: + + __BTF_ID__type1__name1__1: + .zero 4 + __BTF_ID__type2__name2__2: + .zero 4 + +The ``u32 list[];`` variable is defined to access the list. + +The ``BTF_ID_UNUSED`` macro defines 4 zero bytes. It's used when we +want to define unused entry in BTF_ID_LIST, like:: + + BTF_ID_LIST(bpf_skb_output_btf_ids) + BTF_ID(struct, sk_buff) + BTF_ID_UNUSED + BTF_ID(struct, task_struct) + +The ``BTF_SET_START/END`` macros pair defines sorted list of BTF ID values +and their count, with following syntax:: + + BTF_SET_START(set) + BTF_ID(type1, name1) + BTF_ID(type2, name2) + BTF_SET_END(set) + +resulting in following layout in .BTF_ids section:: + + __BTF_ID__set__set: + .zero 4 + __BTF_ID__type1__name1__3: + .zero 4 + __BTF_ID__type2__name2__4: + .zero 4 + +The ``struct btf_id_set set;`` variable is defined to access the list. + +The ``typeX`` name can be one of following:: + + struct, union, typedef, func + +and is used as a filter when resolving the BTF ID value. + +All the BTF ID lists and sets are compiled in the .BTF_ids section and +resolved during the linking phase of kernel build by ``resolve_btfids`` tool. + +5. Using BTF +============ + +5.1 bpftool map pretty print +---------------------------- + +With BTF, the map key/value can be printed based on fields rather than simply +raw bytes. This is especially valuable for large structure or if your data +structure has bitfields. For example, for the following map,:: + + enum A { A1, A2, A3, A4, A5 }; + typedef enum A ___A; + struct tmp_t { + char a1:4; + int a2:4; + int :4; + __u32 a3:4; + int b; + ___A b1:4; + enum A b2:4; + }; + struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __type(key, int); + __type(value, struct tmp_t); + __uint(max_entries, 1); + } tmpmap SEC(".maps"); + +bpftool is able to pretty print like below: +:: + + [{ + "key": 0, + "value": { + "a1": 0x2, + "a2": 0x4, + "a3": 0x6, + "b": 7, + "b1": 0x8, + "b2": 0xa + } + } + ] + +5.2 bpftool prog dump +--------------------- + +The following is an example showing how func_info and line_info can help prog +dump with better kernel symbol names, function prototypes and line +information.:: + + $ bpftool prog dump jited pinned /sys/fs/bpf/test_btf_haskv + [...] + int test_long_fname_2(struct dummy_tracepoint_args * arg): + bpf_prog_44a040bf25481309_test_long_fname_2: + ; static int test_long_fname_2(struct dummy_tracepoint_args *arg) + 0: push %rbp + 1: mov %rsp,%rbp + 4: sub $0x30,%rsp + b: sub $0x28,%rbp + f: mov %rbx,0x0(%rbp) + 13: mov %r13,0x8(%rbp) + 17: mov %r14,0x10(%rbp) + 1b: mov %r15,0x18(%rbp) + 1f: xor %eax,%eax + 21: mov %rax,0x20(%rbp) + 25: xor %esi,%esi + ; int key = 0; + 27: mov %esi,-0x4(%rbp) + ; if (!arg->sock) + 2a: mov 0x8(%rdi),%rdi + ; if (!arg->sock) + 2e: cmp $0x0,%rdi + 32: je 0x0000000000000070 + 34: mov %rbp,%rsi + ; counts = bpf_map_lookup_elem(&btf_map, &key); + [...] + +5.3 Verifier Log +---------------- + +The following is an example of how line_info can help debugging verification +failure.:: + + /* The code at tools/testing/selftests/bpf/test_xdp_noinline.c + * is modified as below. + */ + data = (void *)(long)xdp->data; + data_end = (void *)(long)xdp->data_end; + /* + if (data + 4 > data_end) + return XDP_DROP; + */ + *(u32 *)data = dst->dst; + + $ bpftool prog load ./test_xdp_noinline.o /sys/fs/bpf/test_xdp_noinline type xdp + ; data = (void *)(long)xdp->data; + 224: (79) r2 = *(u64 *)(r10 -112) + 225: (61) r2 = *(u32 *)(r2 +0) + ; *(u32 *)data = dst->dst; + 226: (63) *(u32 *)(r2 +0) = r1 + invalid access to packet, off=0 size=4, R2(id=0,off=0,r=0) + R2 offset is outside of the packet + +6. BTF Generation +================= + +You need latest pahole + + https://git.kernel.org/pub/scm/devel/pahole/pahole.git/ + +or llvm (8.0 or later). The pahole acts as a dwarf2btf converter. It doesn't +support .BTF.ext and btf BTF_KIND_FUNC type yet. For example,:: + + -bash-4.4$ cat t.c + struct t { + int a:2; + int b:3; + int c:2; + } g; + -bash-4.4$ gcc -c -O2 -g t.c + -bash-4.4$ pahole -JV t.o + File t.o: + [1] STRUCT t kind_flag=1 size=4 vlen=3 + a type_id=2 bitfield_size=2 bits_offset=0 + b type_id=2 bitfield_size=3 bits_offset=2 + c type_id=2 bitfield_size=2 bits_offset=5 + [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED + +The llvm is able to generate .BTF and .BTF.ext directly with -g for bpf target +only. The assembly code (-S) is able to show the BTF encoding in assembly +format.:: + + -bash-4.4$ cat t2.c + typedef int __int32; + struct t2 { + int a2; + int (*f2)(char q1, __int32 q2, ...); + int (*f3)(); + } g2; + int main() { return 0; } + int test() { return 0; } + -bash-4.4$ clang -c -g -O2 -target bpf t2.c + -bash-4.4$ readelf -S t2.o + ...... + [ 8] .BTF PROGBITS 0000000000000000 00000247 + 000000000000016e 0000000000000000 0 0 1 + [ 9] .BTF.ext PROGBITS 0000000000000000 000003b5 + 0000000000000060 0000000000000000 0 0 1 + [10] .rel.BTF.ext REL 0000000000000000 000007e0 + 0000000000000040 0000000000000010 16 9 8 + ...... + -bash-4.4$ clang -S -g -O2 -target bpf t2.c + -bash-4.4$ cat t2.s + ...... + .section .BTF,"",@progbits + .short 60319 # 0xeb9f + .byte 1 + .byte 0 + .long 24 + .long 0 + .long 220 + .long 220 + .long 122 + .long 0 # BTF_KIND_FUNC_PROTO(id = 1) + .long 218103808 # 0xd000000 + .long 2 + .long 83 # BTF_KIND_INT(id = 2) + .long 16777216 # 0x1000000 + .long 4 + .long 16777248 # 0x1000020 + ...... + .byte 0 # string offset=0 + .ascii ".text" # string offset=1 + .byte 0 + .ascii "/home/yhs/tmp-pahole/t2.c" # string offset=7 + .byte 0 + .ascii "int main() { return 0; }" # string offset=33 + .byte 0 + .ascii "int test() { return 0; }" # string offset=58 + .byte 0 + .ascii "int" # string offset=83 + ...... + .section .BTF.ext,"",@progbits + .short 60319 # 0xeb9f + .byte 1 + .byte 0 + .long 24 + .long 0 + .long 28 + .long 28 + .long 44 + .long 8 # FuncInfo + .long 1 # FuncInfo section string offset=1 + .long 2 + .long .Lfunc_begin0 + .long 3 + .long .Lfunc_begin1 + .long 5 + .long 16 # LineInfo + .long 1 # LineInfo section string offset=1 + .long 2 + .long .Ltmp0 + .long 7 + .long 33 + .long 7182 # Line 7 Col 14 + .long .Ltmp3 + .long 7 + .long 58 + .long 8206 # Line 8 Col 14 + +7. Testing +========== + +Kernel bpf selftest `test_btf.c` provides extensive set of BTF-related tests. diff --git a/Documentation/bpf/clang-notes.rst b/Documentation/bpf/clang-notes.rst new file mode 100644 index 000000000..528feddf2 --- /dev/null +++ b/Documentation/bpf/clang-notes.rst @@ -0,0 +1,30 @@ +.. contents:: +.. sectnum:: + +========================== +Clang implementation notes +========================== + +This document provides more details specific to the Clang/LLVM implementation of the eBPF instruction set. + +Versions +======== + +Clang defined "CPU" versions, where a CPU version of 3 corresponds to the current eBPF ISA. + +Clang can select the eBPF ISA version using ``-mcpu=v3`` for example to select version 3. + +Arithmetic instructions +======================= + +For CPU versions prior to 3, Clang v7.0 and later can enable ``BPF_ALU`` support with +``-Xclang -target-feature -Xclang +alu32``. In CPU version 3, support is automatically included. + +Atomic operations +================= + +Clang can generate atomic instructions by default when ``-mcpu=v3`` is +enabled. If a lower version for ``-mcpu`` is set, the only atomic instruction +Clang can generate is ``BPF_ADD`` *without* ``BPF_FETCH``. If you need to enable +the atomics features, while keeping a lower ``-mcpu`` version, you can use +``-Xclang -target-feature -Xclang +alu32``. diff --git a/Documentation/bpf/classic_vs_extended.rst b/Documentation/bpf/classic_vs_extended.rst new file mode 100644 index 000000000..2f81a81f5 --- /dev/null +++ b/Documentation/bpf/classic_vs_extended.rst @@ -0,0 +1,376 @@ + +=================== +Classic BPF vs eBPF +=================== + +eBPF is designed to be JITed with one to one mapping, which can also open up +the possibility for GCC/LLVM compilers to generate optimized eBPF code through +an eBPF backend that performs almost as fast as natively compiled code. + +Some core changes of the eBPF format from classic BPF: + +- Number of registers increase from 2 to 10: + + The old format had two registers A and X, and a hidden frame pointer. The + new layout extends this to be 10 internal registers and a read-only frame + pointer. Since 64-bit CPUs are passing arguments to functions via registers + the number of args from eBPF program to in-kernel function is restricted + to 5 and one register is used to accept return value from an in-kernel + function. Natively, x86_64 passes first 6 arguments in registers, aarch64/ + sparcv9/mips64 have 7 - 8 registers for arguments; x86_64 has 6 callee saved + registers, and aarch64/sparcv9/mips64 have 11 or more callee saved registers. + + Thus, all eBPF registers map one to one to HW registers on x86_64, aarch64, + etc, and eBPF calling convention maps directly to ABIs used by the kernel on + 64-bit architectures. + + On 32-bit architectures JIT may map programs that use only 32-bit arithmetic + and may let more complex programs to be interpreted. + + R0 - R5 are scratch registers and eBPF program needs spill/fill them if + necessary across calls. Note that there is only one eBPF program (== one + eBPF main routine) and it cannot call other eBPF functions, it can only + call predefined in-kernel functions, though. + +- Register width increases from 32-bit to 64-bit: + + Still, the semantics of the original 32-bit ALU operations are preserved + via 32-bit subregisters. All eBPF registers are 64-bit with 32-bit lower + subregisters that zero-extend into 64-bit if they are being written to. + That behavior maps directly to x86_64 and arm64 subregister definition, but + makes other JITs more difficult. + + 32-bit architectures run 64-bit eBPF programs via interpreter. + Their JITs may convert BPF programs that only use 32-bit subregisters into + native instruction set and let the rest being interpreted. + + Operation is 64-bit, because on 64-bit architectures, pointers are also + 64-bit wide, and we want to pass 64-bit values in/out of kernel functions, + so 32-bit eBPF registers would otherwise require to define register-pair + ABI, thus, there won't be able to use a direct eBPF register to HW register + mapping and JIT would need to do combine/split/move operations for every + register in and out of the function, which is complex, bug prone and slow. + Another reason is the use of atomic 64-bit counters. + +- Conditional jt/jf targets replaced with jt/fall-through: + + While the original design has constructs such as ``if (cond) jump_true; + else jump_false;``, they are being replaced into alternative constructs like + ``if (cond) jump_true; /* else fall-through */``. + +- Introduces bpf_call insn and register passing convention for zero overhead + calls from/to other kernel functions: + + Before an in-kernel function call, the eBPF program needs to + place function arguments into R1 to R5 registers to satisfy calling + convention, then the interpreter will take them from registers and pass + to in-kernel function. If R1 - R5 registers are mapped to CPU registers + that are used for argument passing on given architecture, the JIT compiler + doesn't need to emit extra moves. Function arguments will be in the correct + registers and BPF_CALL instruction will be JITed as single 'call' HW + instruction. This calling convention was picked to cover common call + situations without performance penalty. + + After an in-kernel function call, R1 - R5 are reset to unreadable and R0 has + a return value of the function. Since R6 - R9 are callee saved, their state + is preserved across the call. + + For example, consider three C functions:: + + u64 f1() { return (*_f2)(1); } + u64 f2(u64 a) { return f3(a + 1, a); } + u64 f3(u64 a, u64 b) { return a - b; } + + GCC can compile f1, f3 into x86_64:: + + f1: + movl $1, %edi + movq _f2(%rip), %rax + jmp *%rax + f3: + movq %rdi, %rax + subq %rsi, %rax + ret + + Function f2 in eBPF may look like:: + + f2: + bpf_mov R2, R1 + bpf_add R1, 1 + bpf_call f3 + bpf_exit + + If f2 is JITed and the pointer stored to ``_f2``. The calls f1 -> f2 -> f3 and + returns will be seamless. Without JIT, __bpf_prog_run() interpreter needs to + be used to call into f2. + + For practical reasons all eBPF programs have only one argument 'ctx' which is + already placed into R1 (e.g. on __bpf_prog_run() startup) and the programs + can call kernel functions with up to 5 arguments. Calls with 6 or more arguments + are currently not supported, but these restrictions can be lifted if necessary + in the future. + + On 64-bit architectures all register map to HW registers one to one. For + example, x86_64 JIT compiler can map them as ... + + :: + + R0 - rax + R1 - rdi + R2 - rsi + R3 - rdx + R4 - rcx + R5 - r8 + R6 - rbx + R7 - r13 + R8 - r14 + R9 - r15 + R10 - rbp + + ... since x86_64 ABI mandates rdi, rsi, rdx, rcx, r8, r9 for argument passing + and rbx, r12 - r15 are callee saved. + + Then the following eBPF pseudo-program:: + + bpf_mov R6, R1 /* save ctx */ + bpf_mov R2, 2 + bpf_mov R3, 3 + bpf_mov R4, 4 + bpf_mov R5, 5 + bpf_call foo + bpf_mov R7, R0 /* save foo() return value */ + bpf_mov R1, R6 /* restore ctx for next call */ + bpf_mov R2, 6 + bpf_mov R3, 7 + bpf_mov R4, 8 + bpf_mov R5, 9 + bpf_call bar + bpf_add R0, R7 + bpf_exit + + After JIT to x86_64 may look like:: + + push %rbp + mov %rsp,%rbp + sub $0x228,%rsp + mov %rbx,-0x228(%rbp) + mov %r13,-0x220(%rbp) + mov %rdi,%rbx + mov $0x2,%esi + mov $0x3,%edx + mov $0x4,%ecx + mov $0x5,%r8d + callq foo + mov %rax,%r13 + mov %rbx,%rdi + mov $0x6,%esi + mov $0x7,%edx + mov $0x8,%ecx + mov $0x9,%r8d + callq bar + add %r13,%rax + mov -0x228(%rbp),%rbx + mov -0x220(%rbp),%r13 + leaveq + retq + + Which is in this example equivalent in C to:: + + u64 bpf_filter(u64 ctx) + { + return foo(ctx, 2, 3, 4, 5) + bar(ctx, 6, 7, 8, 9); + } + + In-kernel functions foo() and bar() with prototype: u64 (*)(u64 arg1, u64 + arg2, u64 arg3, u64 arg4, u64 arg5); will receive arguments in proper + registers and place their return value into ``%rax`` which is R0 in eBPF. + Prologue and epilogue are emitted by JIT and are implicit in the + interpreter. R0-R5 are scratch registers, so eBPF program needs to preserve + them across the calls as defined by calling convention. + + For example the following program is invalid:: + + bpf_mov R1, 1 + bpf_call foo + bpf_mov R0, R1 + bpf_exit + + After the call the registers R1-R5 contain junk values and cannot be read. + An in-kernel verifier.rst is used to validate eBPF programs. + +Also in the new design, eBPF is limited to 4096 insns, which means that any +program will terminate quickly and will only call a fixed number of kernel +functions. Original BPF and eBPF are two operand instructions, +which helps to do one-to-one mapping between eBPF insn and x86 insn during JIT. + +The input context pointer for invoking the interpreter function is generic, +its content is defined by a specific use case. For seccomp register R1 points +to seccomp_data, for converted BPF filters R1 points to a skb. + +A program, that is translated internally consists of the following elements:: + + op:16, jt:8, jf:8, k:32 ==> op:8, dst_reg:4, src_reg:4, off:16, imm:32 + +So far 87 eBPF instructions were implemented. 8-bit 'op' opcode field +has room for new instructions. Some of them may use 16/24/32 byte encoding. New +instructions must be multiple of 8 bytes to preserve backward compatibility. + +eBPF is a general purpose RISC instruction set. Not every register and +every instruction are used during translation from original BPF to eBPF. +For example, socket filters are not using ``exclusive add`` instruction, but +tracing filters may do to maintain counters of events, for example. Register R9 +is not used by socket filters either, but more complex filters may be running +out of registers and would have to resort to spill/fill to stack. + +eBPF can be used as a generic assembler for last step performance +optimizations, socket filters and seccomp are using it as assembler. Tracing +filters may use it as assembler to generate code from kernel. In kernel usage +may not be bounded by security considerations, since generated eBPF code +may be optimizing internal code path and not being exposed to the user space. +Safety of eBPF can come from the verifier.rst. In such use cases as +described, it may be used as safe instruction set. + +Just like the original BPF, eBPF runs within a controlled environment, +is deterministic and the kernel can easily prove that. The safety of the program +can be determined in two steps: first step does depth-first-search to disallow +loops and other CFG validation; second step starts from the first insn and +descends all possible paths. It simulates execution of every insn and observes +the state change of registers and stack. + +opcode encoding +=============== + +eBPF is reusing most of the opcode encoding from classic to simplify conversion +of classic BPF to eBPF. + +For arithmetic and jump instructions the 8-bit 'code' field is divided into three +parts:: + + +----------------+--------+--------------------+ + | 4 bits | 1 bit | 3 bits | + | operation code | source | instruction class | + +----------------+--------+--------------------+ + (MSB) (LSB) + +Three LSB bits store instruction class which is one of: + + =================== =============== + Classic BPF classes eBPF classes + =================== =============== + BPF_LD 0x00 BPF_LD 0x00 + BPF_LDX 0x01 BPF_LDX 0x01 + BPF_ST 0x02 BPF_ST 0x02 + BPF_STX 0x03 BPF_STX 0x03 + BPF_ALU 0x04 BPF_ALU 0x04 + BPF_JMP 0x05 BPF_JMP 0x05 + BPF_RET 0x06 BPF_JMP32 0x06 + BPF_MISC 0x07 BPF_ALU64 0x07 + =================== =============== + +The 4th bit encodes the source operand ... + + :: + + BPF_K 0x00 + BPF_X 0x08 + + * in classic BPF, this means:: + + BPF_SRC(code) == BPF_X - use register X as source operand + BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand + + * in eBPF, this means:: + + BPF_SRC(code) == BPF_X - use 'src_reg' register as source operand + BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand + +... and four MSB bits store operation code. + +If BPF_CLASS(code) == BPF_ALU or BPF_ALU64 [ in eBPF ], BPF_OP(code) is one of:: + + BPF_ADD 0x00 + BPF_SUB 0x10 + BPF_MUL 0x20 + BPF_DIV 0x30 + BPF_OR 0x40 + BPF_AND 0x50 + BPF_LSH 0x60 + BPF_RSH 0x70 + BPF_NEG 0x80 + BPF_MOD 0x90 + BPF_XOR 0xa0 + BPF_MOV 0xb0 /* eBPF only: mov reg to reg */ + BPF_ARSH 0xc0 /* eBPF only: sign extending shift right */ + BPF_END 0xd0 /* eBPF only: endianness conversion */ + +If BPF_CLASS(code) == BPF_JMP or BPF_JMP32 [ in eBPF ], BPF_OP(code) is one of:: + + BPF_JA 0x00 /* BPF_JMP only */ + BPF_JEQ 0x10 + BPF_JGT 0x20 + BPF_JGE 0x30 + BPF_JSET 0x40 + BPF_JNE 0x50 /* eBPF only: jump != */ + BPF_JSGT 0x60 /* eBPF only: signed '>' */ + BPF_JSGE 0x70 /* eBPF only: signed '>=' */ + BPF_CALL 0x80 /* eBPF BPF_JMP only: function call */ + BPF_EXIT 0x90 /* eBPF BPF_JMP only: function return */ + BPF_JLT 0xa0 /* eBPF only: unsigned '<' */ + BPF_JLE 0xb0 /* eBPF only: unsigned '<=' */ + BPF_JSLT 0xc0 /* eBPF only: signed '<' */ + BPF_JSLE 0xd0 /* eBPF only: signed '<=' */ + +So BPF_ADD | BPF_X | BPF_ALU means 32-bit addition in both classic BPF +and eBPF. There are only two registers in classic BPF, so it means A += X. +In eBPF it means dst_reg = (u32) dst_reg + (u32) src_reg; similarly, +BPF_XOR | BPF_K | BPF_ALU means A ^= imm32 in classic BPF and analogous +src_reg = (u32) src_reg ^ (u32) imm32 in eBPF. + +Classic BPF is using BPF_MISC class to represent A = X and X = A moves. +eBPF is using BPF_MOV | BPF_X | BPF_ALU code instead. Since there are no +BPF_MISC operations in eBPF, the class 7 is used as BPF_ALU64 to mean +exactly the same operations as BPF_ALU, but with 64-bit wide operands +instead. So BPF_ADD | BPF_X | BPF_ALU64 means 64-bit addition, i.e.: +dst_reg = dst_reg + src_reg + +Classic BPF wastes the whole BPF_RET class to represent a single ``ret`` +operation. Classic BPF_RET | BPF_K means copy imm32 into return register +and perform function exit. eBPF is modeled to match CPU, so BPF_JMP | BPF_EXIT +in eBPF means function exit only. The eBPF program needs to store return +value into register R0 before doing a BPF_EXIT. Class 6 in eBPF is used as +BPF_JMP32 to mean exactly the same operations as BPF_JMP, but with 32-bit wide +operands for the comparisons instead. + +For load and store instructions the 8-bit 'code' field is divided as:: + + +--------+--------+-------------------+ + | 3 bits | 2 bits | 3 bits | + | mode | size | instruction class | + +--------+--------+-------------------+ + (MSB) (LSB) + +Size modifier is one of ... + +:: + + BPF_W 0x00 /* word */ + BPF_H 0x08 /* half word */ + BPF_B 0x10 /* byte */ + BPF_DW 0x18 /* eBPF only, double word */ + +... which encodes size of load/store operation:: + + B - 1 byte + H - 2 byte + W - 4 byte + DW - 8 byte (eBPF only) + +Mode modifier is one of:: + + BPF_IMM 0x00 /* used for 32-bit mov in classic BPF and 64-bit in eBPF */ + BPF_ABS 0x20 + BPF_IND 0x40 + BPF_MEM 0x60 + BPF_LEN 0x80 /* classic BPF only, reserved in eBPF */ + BPF_MSH 0xa0 /* classic BPF only, reserved in eBPF */ + BPF_ATOMIC 0xc0 /* eBPF only, atomic operations */ diff --git a/Documentation/bpf/drgn.rst b/Documentation/bpf/drgn.rst new file mode 100644 index 000000000..41f223c31 --- /dev/null +++ b/Documentation/bpf/drgn.rst @@ -0,0 +1,213 @@ +.. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) + +============== +BPF drgn tools +============== + +drgn scripts is a convenient and easy to use mechanism to retrieve arbitrary +kernel data structures. drgn is not relying on kernel UAPI to read the data. +Instead it's reading directly from ``/proc/kcore`` or vmcore and pretty prints +the data based on DWARF debug information from vmlinux. + +This document describes BPF related drgn tools. + +See `drgn/tools`_ for all tools available at the moment and `drgn/doc`_ for +more details on drgn itself. + +bpf_inspect.py +-------------- + +Description +=========== + +`bpf_inspect.py`_ is a tool intended to inspect BPF programs and maps. It can +iterate over all programs and maps in the system and print basic information +about these objects, including id, type and name. + +The main use-case `bpf_inspect.py`_ covers is to show BPF programs of types +``BPF_PROG_TYPE_EXT`` and ``BPF_PROG_TYPE_TRACING`` attached to other BPF +programs via ``freplace``/``fentry``/``fexit`` mechanisms, since there is no +user-space API to get this information. + +Getting started +=============== + +List BPF programs (full names are obtained from BTF):: + + % sudo bpf_inspect.py prog + 27: BPF_PROG_TYPE_TRACEPOINT tracepoint__tcp__tcp_send_reset + 4632: BPF_PROG_TYPE_CGROUP_SOCK_ADDR tw_ipt_bind + 49464: BPF_PROG_TYPE_RAW_TRACEPOINT raw_tracepoint__sched_process_exit + +List BPF maps:: + + % sudo bpf_inspect.py map + 2577: BPF_MAP_TYPE_HASH tw_ipt_vips + 4050: BPF_MAP_TYPE_STACK_TRACE stack_traces + 4069: BPF_MAP_TYPE_PERCPU_ARRAY ned_dctcp_cntr + +Find BPF programs attached to BPF program ``test_pkt_access``:: + + % sudo bpf_inspect.py p | grep test_pkt_access + 650: BPF_PROG_TYPE_SCHED_CLS test_pkt_access + 654: BPF_PROG_TYPE_TRACING test_main linked:[650->25: BPF_TRAMP_FEXIT test_pkt_access->test_pkt_access()] + 655: BPF_PROG_TYPE_TRACING test_subprog1 linked:[650->29: BPF_TRAMP_FEXIT test_pkt_access->test_pkt_access_subprog1()] + 656: BPF_PROG_TYPE_TRACING test_subprog2 linked:[650->31: BPF_TRAMP_FEXIT test_pkt_access->test_pkt_access_subprog2()] + 657: BPF_PROG_TYPE_TRACING test_subprog3 linked:[650->21: BPF_TRAMP_FEXIT test_pkt_access->test_pkt_access_subprog3()] + 658: BPF_PROG_TYPE_EXT new_get_skb_len linked:[650->16: BPF_TRAMP_REPLACE test_pkt_access->get_skb_len()] + 659: BPF_PROG_TYPE_EXT new_get_skb_ifindex linked:[650->23: BPF_TRAMP_REPLACE test_pkt_access->get_skb_ifindex()] + 660: BPF_PROG_TYPE_EXT new_get_constant linked:[650->19: BPF_TRAMP_REPLACE test_pkt_access->get_constant()] + +It can be seen that there is a program ``test_pkt_access``, id 650 and there +are multiple other tracing and ext programs attached to functions in +``test_pkt_access``. + +For example the line:: + + 658: BPF_PROG_TYPE_EXT new_get_skb_len linked:[650->16: BPF_TRAMP_REPLACE test_pkt_access->get_skb_len()] + +, means that BPF program id 658, type ``BPF_PROG_TYPE_EXT``, name +``new_get_skb_len`` replaces (``BPF_TRAMP_REPLACE``) function ``get_skb_len()`` +that has BTF id 16 in BPF program id 650, name ``test_pkt_access``. + +Getting help: + +.. code-block:: none + + % sudo bpf_inspect.py + usage: bpf_inspect.py [-h] {prog,p,map,m} ... + + drgn script to list BPF programs or maps and their properties + unavailable via kernel API. + + See https://github.com/osandov/drgn/ for more details on drgn. + + optional arguments: + -h, --help show this help message and exit + + subcommands: + {prog,p,map,m} + prog (p) list BPF programs + map (m) list BPF maps + +Customization +============= + +The script is intended to be customized by developers to print relevant +information about BPF programs, maps and other objects. + +For example, to print ``struct bpf_prog_aux`` for BPF program id 53077: + +.. code-block:: none + + % git diff + diff --git a/tools/bpf_inspect.py b/tools/bpf_inspect.py + index 650e228..aea2357 100755 + --- a/tools/bpf_inspect.py + +++ b/tools/bpf_inspect.py + @@ -112,7 +112,9 @@ def list_bpf_progs(args): + if linked: + linked = f" linked:[{linked}]" + + - print(f"{id_:>6}: {type_:32} {name:32} {linked}") + + if id_ == 53077: + + print(f"{id_:>6}: {type_:32} {name:32}") + + print(f"{bpf_prog.aux}") + + + def list_bpf_maps(args): + +It produces the output:: + + % sudo bpf_inspect.py p + 53077: BPF_PROG_TYPE_XDP tw_xdp_policer + *(struct bpf_prog_aux *)0xffff8893fad4b400 = { + .refcnt = (atomic64_t){ + .counter = (long)58, + }, + .used_map_cnt = (u32)1, + .max_ctx_offset = (u32)8, + .max_pkt_offset = (u32)15, + .max_tp_access = (u32)0, + .stack_depth = (u32)8, + .id = (u32)53077, + .func_cnt = (u32)0, + .func_idx = (u32)0, + .attach_btf_id = (u32)0, + .linked_prog = (struct bpf_prog *)0x0, + .verifier_zext = (bool)0, + .offload_requested = (bool)0, + .attach_btf_trace = (bool)0, + .func_proto_unreliable = (bool)0, + .trampoline_prog_type = (enum bpf_tramp_prog_type)BPF_TRAMP_FENTRY, + .trampoline = (struct bpf_trampoline *)0x0, + .tramp_hlist = (struct hlist_node){ + .next = (struct hlist_node *)0x0, + .pprev = (struct hlist_node **)0x0, + }, + .attach_func_proto = (const struct btf_type *)0x0, + .attach_func_name = (const char *)0x0, + .func = (struct bpf_prog **)0x0, + .jit_data = (void *)0x0, + .poke_tab = (struct bpf_jit_poke_descriptor *)0x0, + .size_poke_tab = (u32)0, + .ksym_tnode = (struct latch_tree_node){ + .node = (struct rb_node [2]){ + { + .__rb_parent_color = (unsigned long)18446612956263126665, + .rb_right = (struct rb_node *)0x0, + .rb_left = (struct rb_node *)0xffff88a0be3d0088, + }, + { + .__rb_parent_color = (unsigned long)18446612956263126689, + .rb_right = (struct rb_node *)0x0, + .rb_left = (struct rb_node *)0xffff88a0be3d00a0, + }, + }, + }, + .ksym_lnode = (struct list_head){ + .next = (struct list_head *)0xffff88bf481830b8, + .prev = (struct list_head *)0xffff888309f536b8, + }, + .ops = (const struct bpf_prog_ops *)xdp_prog_ops+0x0 = 0xffffffff820fa350, + .used_maps = (struct bpf_map **)0xffff889ff795de98, + .prog = (struct bpf_prog *)0xffffc9000cf2d000, + .user = (struct user_struct *)root_user+0x0 = 0xffffffff82444820, + .load_time = (u64)2408348759285319, + .cgroup_storage = (struct bpf_map *[2]){}, + .name = (char [16])"tw_xdp_policer", + .security = (void *)0xffff889ff795d548, + .offload = (struct bpf_prog_offload *)0x0, + .btf = (struct btf *)0xffff8890ce6d0580, + .func_info = (struct bpf_func_info *)0xffff889ff795d240, + .func_info_aux = (struct bpf_func_info_aux *)0xffff889ff795de20, + .linfo = (struct bpf_line_info *)0xffff888a707afc00, + .jited_linfo = (void **)0xffff8893fad48600, + .func_info_cnt = (u32)1, + .nr_linfo = (u32)37, + .linfo_idx = (u32)0, + .num_exentries = (u32)0, + .extable = (struct exception_table_entry *)0xffffffffa032d950, + .stats = (struct bpf_prog_stats *)0x603fe3a1f6d0, + .work = (struct work_struct){ + .data = (atomic_long_t){ + .counter = (long)0, + }, + .entry = (struct list_head){ + .next = (struct list_head *)0x0, + .prev = (struct list_head *)0x0, + }, + .func = (work_func_t)0x0, + }, + .rcu = (struct callback_head){ + .next = (struct callback_head *)0x0, + .func = (void (*)(struct callback_head *))0x0, + }, + } + + +.. Links +.. _drgn/doc: https://drgn.readthedocs.io/en/latest/ +.. _drgn/tools: https://github.com/osandov/drgn/tree/master/tools +.. _bpf_inspect.py: + https://github.com/osandov/drgn/blob/master/tools/bpf_inspect.py diff --git a/Documentation/bpf/faq.rst b/Documentation/bpf/faq.rst new file mode 100644 index 000000000..a622602ce --- /dev/null +++ b/Documentation/bpf/faq.rst @@ -0,0 +1,11 @@ +================================ +Frequently asked questions (FAQ) +================================ + +Two sets of Questions and Answers (Q&A) are maintained. + +.. toctree:: + :maxdepth: 1 + + bpf_design_QA + bpf_devel_QA diff --git a/Documentation/bpf/helpers.rst b/Documentation/bpf/helpers.rst new file mode 100644 index 000000000..c4ee0cc20 --- /dev/null +++ b/Documentation/bpf/helpers.rst @@ -0,0 +1,7 @@ +Helper functions +================ + +* `bpf-helpers(7)`_ maintains a list of helpers available to eBPF programs. + +.. Links +.. _bpf-helpers(7): https://man7.org/linux/man-pages/man7/bpf-helpers.7.html
\ No newline at end of file diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst new file mode 100644 index 000000000..1b50de198 --- /dev/null +++ b/Documentation/bpf/index.rst @@ -0,0 +1,41 @@ +================= +BPF Documentation +================= + +This directory contains documentation for the BPF (Berkeley Packet +Filter) facility, with a focus on the extended BPF version (eBPF). + +This kernel side documentation is still work in progress. +The Cilium project also maintains a `BPF and XDP Reference Guide`_ +that goes into great technical depth about the BPF Architecture. + +.. toctree:: + :maxdepth: 1 + + instruction-set + verifier + libbpf/index + btf + faq + syscall_api + helpers + kfuncs + programs + maps + bpf_prog_run + classic_vs_extended.rst + bpf_licensing + test_debug + clang-notes + linux-notes + other + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` + +.. Links: +.. _BPF and XDP Reference Guide: https://docs.cilium.io/en/latest/bpf/ diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst new file mode 100644 index 000000000..3ba6475cf --- /dev/null +++ b/Documentation/bpf/instruction-set.rst @@ -0,0 +1,340 @@ +.. contents:: +.. sectnum:: + +======================================== +eBPF Instruction Set Specification, v1.0 +======================================== + +This document specifies version 1.0 of the eBPF instruction set. + + +Registers and calling convention +================================ + +eBPF has 10 general purpose registers and a read-only frame pointer register, +all of which are 64-bits wide. + +The eBPF calling convention is defined as: + +* R0: return value from function calls, and exit value for eBPF programs +* R1 - R5: arguments for function calls +* R6 - R9: callee saved registers that function calls will preserve +* R10: read-only frame pointer to access stack + +R0 - R5 are scratch registers and eBPF programs needs to spill/fill them if +necessary across calls. + +Instruction encoding +==================== + +eBPF has two instruction encodings: + +* the basic instruction encoding, which uses 64 bits to encode an instruction +* the wide instruction encoding, which appends a second 64-bit immediate value + (imm64) after the basic instruction for a total of 128 bits. + +The basic instruction encoding looks as follows: + +============= ======= =============== ==================== ============ +32 bits (MSB) 16 bits 4 bits 4 bits 8 bits (LSB) +============= ======= =============== ==================== ============ +immediate offset source register destination register opcode +============= ======= =============== ==================== ============ + +Note that most instructions do not use all of the fields. +Unused fields shall be cleared to zero. + +Instruction classes +------------------- + +The three LSB bits of the 'opcode' field store the instruction class: + +========= ===== =============================== =================================== +class value description reference +========= ===== =============================== =================================== +BPF_LD 0x00 non-standard load operations `Load and store instructions`_ +BPF_LDX 0x01 load into register operations `Load and store instructions`_ +BPF_ST 0x02 store from immediate operations `Load and store instructions`_ +BPF_STX 0x03 store from register operations `Load and store instructions`_ +BPF_ALU 0x04 32-bit arithmetic operations `Arithmetic and jump instructions`_ +BPF_JMP 0x05 64-bit jump operations `Arithmetic and jump instructions`_ +BPF_JMP32 0x06 32-bit jump operations `Arithmetic and jump instructions`_ +BPF_ALU64 0x07 64-bit arithmetic operations `Arithmetic and jump instructions`_ +========= ===== =============================== =================================== + +Arithmetic and jump instructions +================================ + +For arithmetic and jump instructions (``BPF_ALU``, ``BPF_ALU64``, ``BPF_JMP`` and +``BPF_JMP32``), the 8-bit 'opcode' field is divided into three parts: + +============== ====== ================= +4 bits (MSB) 1 bit 3 bits (LSB) +============== ====== ================= +operation code source instruction class +============== ====== ================= + +The 4th bit encodes the source operand: + + ====== ===== ======================================== + source value description + ====== ===== ======================================== + BPF_K 0x00 use 32-bit immediate as source operand + BPF_X 0x08 use 'src_reg' register as source operand + ====== ===== ======================================== + +The four MSB bits store the operation code. + + +Arithmetic instructions +----------------------- + +``BPF_ALU`` uses 32-bit wide operands while ``BPF_ALU64`` uses 64-bit wide operands for +otherwise identical operations. +The 'code' field encodes the operation as below: + +======== ===== ========================================================== +code value description +======== ===== ========================================================== +BPF_ADD 0x00 dst += src +BPF_SUB 0x10 dst -= src +BPF_MUL 0x20 dst \*= src +BPF_DIV 0x30 dst = (src != 0) ? (dst / src) : 0 +BPF_OR 0x40 dst \|= src +BPF_AND 0x50 dst &= src +BPF_LSH 0x60 dst <<= src +BPF_RSH 0x70 dst >>= src +BPF_NEG 0x80 dst = ~src +BPF_MOD 0x90 dst = (src != 0) ? (dst % src) : dst +BPF_XOR 0xa0 dst ^= src +BPF_MOV 0xb0 dst = src +BPF_ARSH 0xc0 sign extending shift right +BPF_END 0xd0 byte swap operations (see `Byte swap instructions`_ below) +======== ===== ========================================================== + +Underflow and overflow are allowed during arithmetic operations, meaning +the 64-bit or 32-bit value will wrap. If eBPF program execution would +result in division by zero, the destination register is instead set to zero. +If execution would result in modulo by zero, for ``BPF_ALU64`` the value of +the destination register is unchanged whereas for ``BPF_ALU`` the upper +32 bits of the destination register are zeroed. + +``BPF_ADD | BPF_X | BPF_ALU`` means:: + + dst_reg = (u32) dst_reg + (u32) src_reg; + +``BPF_ADD | BPF_X | BPF_ALU64`` means:: + + dst_reg = dst_reg + src_reg + +``BPF_XOR | BPF_K | BPF_ALU`` means:: + + src_reg = (u32) src_reg ^ (u32) imm32 + +``BPF_XOR | BPF_K | BPF_ALU64`` means:: + + src_reg = src_reg ^ imm32 + +Also note that the division and modulo operations are unsigned. Thus, for +``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas +for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result +interpreted as an unsigned 64-bit value. There are no instructions for +signed division or modulo. + +Byte swap instructions +~~~~~~~~~~~~~~~~~~~~~~ + +The byte swap instructions use an instruction class of ``BPF_ALU`` and a 4-bit +'code' field of ``BPF_END``. + +The byte swap instructions operate on the destination register +only and do not use a separate source register or immediate value. + +The 1-bit source operand field in the opcode is used to select what byte +order the operation convert from or to: + +========= ===== ================================================= +source value description +========= ===== ================================================= +BPF_TO_LE 0x00 convert between host byte order and little endian +BPF_TO_BE 0x08 convert between host byte order and big endian +========= ===== ================================================= + +The 'imm' field encodes the width of the swap operations. The following widths +are supported: 16, 32 and 64. + +Examples: + +``BPF_ALU | BPF_TO_LE | BPF_END`` with imm = 16 means:: + + dst_reg = htole16(dst_reg) + +``BPF_ALU | BPF_TO_BE | BPF_END`` with imm = 64 means:: + + dst_reg = htobe64(dst_reg) + +Jump instructions +----------------- + +``BPF_JMP32`` uses 32-bit wide operands while ``BPF_JMP`` uses 64-bit wide operands for +otherwise identical operations. +The 'code' field encodes the operation as below: + +======== ===== ========================= ============ +code value description notes +======== ===== ========================= ============ +BPF_JA 0x00 PC += off BPF_JMP only +BPF_JEQ 0x10 PC += off if dst == src +BPF_JGT 0x20 PC += off if dst > src unsigned +BPF_JGE 0x30 PC += off if dst >= src unsigned +BPF_JSET 0x40 PC += off if dst & src +BPF_JNE 0x50 PC += off if dst != src +BPF_JSGT 0x60 PC += off if dst > src signed +BPF_JSGE 0x70 PC += off if dst >= src signed +BPF_CALL 0x80 function call +BPF_EXIT 0x90 function / program return BPF_JMP only +BPF_JLT 0xa0 PC += off if dst < src unsigned +BPF_JLE 0xb0 PC += off if dst <= src unsigned +BPF_JSLT 0xc0 PC += off if dst < src signed +BPF_JSLE 0xd0 PC += off if dst <= src signed +======== ===== ========================= ============ + +The eBPF program needs to store the return value into register R0 before doing a +BPF_EXIT. + + +Load and store instructions +=========================== + +For load and store instructions (``BPF_LD``, ``BPF_LDX``, ``BPF_ST``, and ``BPF_STX``), the +8-bit 'opcode' field is divided as: + +============ ====== ================= +3 bits (MSB) 2 bits 3 bits (LSB) +============ ====== ================= +mode size instruction class +============ ====== ================= + +The mode modifier is one of: + + ============= ===== ==================================== ============= + mode modifier value description reference + ============= ===== ==================================== ============= + BPF_IMM 0x00 64-bit immediate instructions `64-bit immediate instructions`_ + BPF_ABS 0x20 legacy BPF packet access (absolute) `Legacy BPF Packet access instructions`_ + BPF_IND 0x40 legacy BPF packet access (indirect) `Legacy BPF Packet access instructions`_ + BPF_MEM 0x60 regular load and store operations `Regular load and store operations`_ + BPF_ATOMIC 0xc0 atomic operations `Atomic operations`_ + ============= ===== ==================================== ============= + +The size modifier is one of: + + ============= ===== ===================== + size modifier value description + ============= ===== ===================== + BPF_W 0x00 word (4 bytes) + BPF_H 0x08 half word (2 bytes) + BPF_B 0x10 byte + BPF_DW 0x18 double word (8 bytes) + ============= ===== ===================== + +Regular load and store operations +--------------------------------- + +The ``BPF_MEM`` mode modifier is used to encode regular load and store +instructions that transfer data between a register and memory. + +``BPF_MEM | <size> | BPF_STX`` means:: + + *(size *) (dst_reg + off) = src_reg + +``BPF_MEM | <size> | BPF_ST`` means:: + + *(size *) (dst_reg + off) = imm32 + +``BPF_MEM | <size> | BPF_LDX`` means:: + + dst_reg = *(size *) (src_reg + off) + +Where size is one of: ``BPF_B``, ``BPF_H``, ``BPF_W``, or ``BPF_DW``. + +Atomic operations +----------------- + +Atomic operations are operations that operate on memory and can not be +interrupted or corrupted by other access to the same memory region +by other eBPF programs or means outside of this specification. + +All atomic operations supported by eBPF are encoded as store operations +that use the ``BPF_ATOMIC`` mode modifier as follows: + +* ``BPF_ATOMIC | BPF_W | BPF_STX`` for 32-bit operations +* ``BPF_ATOMIC | BPF_DW | BPF_STX`` for 64-bit operations +* 8-bit and 16-bit wide atomic operations are not supported. + +The 'imm' field is used to encode the actual atomic operation. +Simple atomic operation use a subset of the values defined to encode +arithmetic operations in the 'imm' field to encode the atomic operation: + +======== ===== =========== +imm value description +======== ===== =========== +BPF_ADD 0x00 atomic add +BPF_OR 0x40 atomic or +BPF_AND 0x50 atomic and +BPF_XOR 0xa0 atomic xor +======== ===== =========== + + +``BPF_ATOMIC | BPF_W | BPF_STX`` with 'imm' = BPF_ADD means:: + + *(u32 *)(dst_reg + off16) += src_reg + +``BPF_ATOMIC | BPF_DW | BPF_STX`` with 'imm' = BPF ADD means:: + + *(u64 *)(dst_reg + off16) += src_reg + +In addition to the simple atomic operations, there also is a modifier and +two complex atomic operations: + +=========== ================ =========================== +imm value description +=========== ================ =========================== +BPF_FETCH 0x01 modifier: return old value +BPF_XCHG 0xe0 | BPF_FETCH atomic exchange +BPF_CMPXCHG 0xf0 | BPF_FETCH atomic compare and exchange +=========== ================ =========================== + +The ``BPF_FETCH`` modifier is optional for simple atomic operations, and +always set for the complex atomic operations. If the ``BPF_FETCH`` flag +is set, then the operation also overwrites ``src_reg`` with the value that +was in memory before it was modified. + +The ``BPF_XCHG`` operation atomically exchanges ``src_reg`` with the value +addressed by ``dst_reg + off``. + +The ``BPF_CMPXCHG`` operation atomically compares the value addressed by +``dst_reg + off`` with ``R0``. If they match, the value addressed by +``dst_reg + off`` is replaced with ``src_reg``. In either case, the +value that was at ``dst_reg + off`` before the operation is zero-extended +and loaded back to ``R0``. + +64-bit immediate instructions +----------------------------- + +Instructions with the ``BPF_IMM`` 'mode' modifier use the wide instruction +encoding for an extra imm64 value. + +There is currently only one such instruction. + +``BPF_LD | BPF_DW | BPF_IMM`` means:: + + dst_reg = imm64 + + +Legacy BPF Packet access instructions +------------------------------------- + +eBPF previously introduced special instructions for access to packet data that were +carried over from classic BPF. However, these instructions are +deprecated and should no longer be used. diff --git a/Documentation/bpf/kfuncs.rst b/Documentation/bpf/kfuncs.rst new file mode 100644 index 000000000..0f8581563 --- /dev/null +++ b/Documentation/bpf/kfuncs.rst @@ -0,0 +1,193 @@ +============================= +BPF Kernel Functions (kfuncs) +============================= + +1. Introduction +=============== + +BPF Kernel Functions or more commonly known as kfuncs are functions in the Linux +kernel which are exposed for use by BPF programs. Unlike normal BPF helpers, +kfuncs do not have a stable interface and can change from one kernel release to +another. Hence, BPF programs need to be updated in response to changes in the +kernel. + +2. Defining a kfunc +=================== + +There are two ways to expose a kernel function to BPF programs, either make an +existing function in the kernel visible, or add a new wrapper for BPF. In both +cases, care must be taken that BPF program can only call such function in a +valid context. To enforce this, visibility of a kfunc can be per program type. + +If you are not creating a BPF wrapper for existing kernel function, skip ahead +to :ref:`BPF_kfunc_nodef`. + +2.1 Creating a wrapper kfunc +---------------------------- + +When defining a wrapper kfunc, the wrapper function should have extern linkage. +This prevents the compiler from optimizing away dead code, as this wrapper kfunc +is not invoked anywhere in the kernel itself. It is not necessary to provide a +prototype in a header for the wrapper kfunc. + +An example is given below:: + + /* Disables missing prototype warnings */ + __diag_push(); + __diag_ignore_all("-Wmissing-prototypes", + "Global kfuncs as their definitions will be in BTF"); + + struct task_struct *bpf_find_get_task_by_vpid(pid_t nr) + { + return find_get_task_by_vpid(nr); + } + + __diag_pop(); + +A wrapper kfunc is often needed when we need to annotate parameters of the +kfunc. Otherwise one may directly make the kfunc visible to the BPF program by +registering it with the BPF subsystem. See :ref:`BPF_kfunc_nodef`. + +2.2 Annotating kfunc parameters +------------------------------- + +Similar to BPF helpers, there is sometime need for additional context required +by the verifier to make the usage of kernel functions safer and more useful. +Hence, we can annotate a parameter by suffixing the name of the argument of the +kfunc with a __tag, where tag may be one of the supported annotations. + +2.2.1 __sz Annotation +--------------------- + +This annotation is used to indicate a memory and size pair in the argument list. +An example is given below:: + + void bpf_memzero(void *mem, int mem__sz) + { + ... + } + +Here, the verifier will treat first argument as a PTR_TO_MEM, and second +argument as its size. By default, without __sz annotation, the size of the type +of the pointer is used. Without __sz annotation, a kfunc cannot accept a void +pointer. + +.. _BPF_kfunc_nodef: + +2.3 Using an existing kernel function +------------------------------------- + +When an existing function in the kernel is fit for consumption by BPF programs, +it can be directly registered with the BPF subsystem. However, care must still +be taken to review the context in which it will be invoked by the BPF program +and whether it is safe to do so. + +2.4 Annotating kfuncs +--------------------- + +In addition to kfuncs' arguments, verifier may need more information about the +type of kfunc(s) being registered with the BPF subsystem. To do so, we define +flags on a set of kfuncs as follows:: + + BTF_SET8_START(bpf_task_set) + BTF_ID_FLAGS(func, bpf_get_task_pid, KF_ACQUIRE | KF_RET_NULL) + BTF_ID_FLAGS(func, bpf_put_pid, KF_RELEASE) + BTF_SET8_END(bpf_task_set) + +This set encodes the BTF ID of each kfunc listed above, and encodes the flags +along with it. Ofcourse, it is also allowed to specify no flags. + +2.4.1 KF_ACQUIRE flag +--------------------- + +The KF_ACQUIRE flag is used to indicate that the kfunc returns a pointer to a +refcounted object. The verifier will then ensure that the pointer to the object +is eventually released using a release kfunc, or transferred to a map using a +referenced kptr (by invoking bpf_kptr_xchg). If not, the verifier fails the +loading of the BPF program until no lingering references remain in all possible +explored states of the program. + +2.4.2 KF_RET_NULL flag +---------------------- + +The KF_RET_NULL flag is used to indicate that the pointer returned by the kfunc +may be NULL. Hence, it forces the user to do a NULL check on the pointer +returned from the kfunc before making use of it (dereferencing or passing to +another helper). This flag is often used in pairing with KF_ACQUIRE flag, but +both are orthogonal to each other. + +2.4.3 KF_RELEASE flag +--------------------- + +The KF_RELEASE flag is used to indicate that the kfunc releases the pointer +passed in to it. There can be only one referenced pointer that can be passed in. +All copies of the pointer being released are invalidated as a result of invoking +kfunc with this flag. + +2.4.4 KF_KPTR_GET flag +---------------------- + +The KF_KPTR_GET flag is used to indicate that the kfunc takes the first argument +as a pointer to kptr, safely increments the refcount of the object it points to, +and returns a reference to the user. The rest of the arguments may be normal +arguments of a kfunc. The KF_KPTR_GET flag should be used in conjunction with +KF_ACQUIRE and KF_RET_NULL flags. + +2.4.5 KF_TRUSTED_ARGS flag +-------------------------- + +The KF_TRUSTED_ARGS flag is used for kfuncs taking pointer arguments. It +indicates that the all pointer arguments will always have a guaranteed lifetime, +and pointers to kernel objects are always passed to helpers in their unmodified +form (as obtained from acquire kfuncs). + +It can be used to enforce that a pointer to a refcounted object acquired from a +kfunc or BPF helper is passed as an argument to this kfunc without any +modifications (e.g. pointer arithmetic) such that it is trusted and points to +the original object. + +Meanwhile, it is also allowed pass pointers to normal memory to such kfuncs, +but those can have a non-zero offset. + +This flag is often used for kfuncs that operate (change some property, perform +some operation) on an object that was obtained using an acquire kfunc. Such +kfuncs need an unchanged pointer to ensure the integrity of the operation being +performed on the expected object. + +2.4.6 KF_SLEEPABLE flag +----------------------- + +The KF_SLEEPABLE flag is used for kfuncs that may sleep. Such kfuncs can only +be called by sleepable BPF programs (BPF_F_SLEEPABLE). + +2.4.7 KF_DESTRUCTIVE flag +-------------------------- + +The KF_DESTRUCTIVE flag is used to indicate functions calling which is +destructive to the system. For example such a call can result in system +rebooting or panicking. Due to this additional restrictions apply to these +calls. At the moment they only require CAP_SYS_BOOT capability, but more can be +added later. + +2.5 Registering the kfuncs +-------------------------- + +Once the kfunc is prepared for use, the final step to making it visible is +registering it with the BPF subsystem. Registration is done per BPF program +type. An example is shown below:: + + BTF_SET8_START(bpf_task_set) + BTF_ID_FLAGS(func, bpf_get_task_pid, KF_ACQUIRE | KF_RET_NULL) + BTF_ID_FLAGS(func, bpf_put_pid, KF_RELEASE) + BTF_SET8_END(bpf_task_set) + + static const struct btf_kfunc_id_set bpf_task_kfunc_set = { + .owner = THIS_MODULE, + .set = &bpf_task_set, + }; + + static int init_subsystem(void) + { + return register_btf_kfunc_id_set(BPF_PROG_TYPE_TRACING, &bpf_task_kfunc_set); + } + late_initcall(init_subsystem); diff --git a/Documentation/bpf/libbpf/index.rst b/Documentation/bpf/libbpf/index.rst new file mode 100644 index 000000000..3722537d1 --- /dev/null +++ b/Documentation/bpf/libbpf/index.rst @@ -0,0 +1,21 @@ +.. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) + +libbpf +====== + +.. toctree:: + :maxdepth: 1 + + API Documentation <https://libbpf.readthedocs.io/en/latest/api.html> + libbpf_naming_convention + libbpf_build + +This is documentation for libbpf, a userspace library for loading and +interacting with bpf programs. + +All general BPF questions, including kernel functionality, libbpf APIs and +their application, should be sent to bpf@vger.kernel.org mailing list. +You can `subscribe <http://vger.kernel.org/vger-lists.html#bpf>`_ to the +mailing list search its `archive <https://lore.kernel.org/bpf/>`_. +Please search the archive before asking new questions. It very well might +be that this was already addressed or answered before. diff --git a/Documentation/bpf/libbpf/libbpf_build.rst b/Documentation/bpf/libbpf/libbpf_build.rst new file mode 100644 index 000000000..8e8c23e80 --- /dev/null +++ b/Documentation/bpf/libbpf/libbpf_build.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) + +Building libbpf +=============== + +libelf and zlib are internal dependencies of libbpf and thus are required to link +against and must be installed on the system for applications to work. +pkg-config is used by default to find libelf, and the program called +can be overridden with PKG_CONFIG. + +If using pkg-config at build time is not desired, it can be disabled by +setting NO_PKG_CONFIG=1 when calling make. + +To build both static libbpf.a and shared libbpf.so: + +.. code-block:: bash + + $ cd src + $ make + +To build only static libbpf.a library in directory build/ and install them +together with libbpf headers in a staging directory root/: + +.. code-block:: bash + + $ cd src + $ mkdir build root + $ BUILD_STATIC_ONLY=y OBJDIR=build DESTDIR=root make install + +To build both static libbpf.a and shared libbpf.so against a custom libelf +dependency installed in /build/root/ and install them together with libbpf +headers in a build directory /build/root/: + +.. code-block:: bash + + $ cd src + $ PKG_CONFIG_PATH=/build/root/lib64/pkgconfig DESTDIR=/build/root make
\ No newline at end of file diff --git a/Documentation/bpf/libbpf/libbpf_naming_convention.rst b/Documentation/bpf/libbpf/libbpf_naming_convention.rst new file mode 100644 index 000000000..c5ac97f3d --- /dev/null +++ b/Documentation/bpf/libbpf/libbpf_naming_convention.rst @@ -0,0 +1,193 @@ +.. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) + +API naming convention +===================== + +libbpf API provides access to a few logically separated groups of +functions and types. Every group has its own naming convention +described here. It's recommended to follow these conventions whenever a +new function or type is added to keep libbpf API clean and consistent. + +All types and functions provided by libbpf API should have one of the +following prefixes: ``bpf_``, ``btf_``, ``libbpf_``, ``btf_dump_``, +``ring_buffer_``, ``perf_buffer_``. + +System call wrappers +-------------------- + +System call wrappers are simple wrappers for commands supported by +sys_bpf system call. These wrappers should go to ``bpf.h`` header file +and map one to one to corresponding commands. + +For example ``bpf_map_lookup_elem`` wraps ``BPF_MAP_LOOKUP_ELEM`` +command of sys_bpf, ``bpf_prog_attach`` wraps ``BPF_PROG_ATTACH``, etc. + +Objects +------- + +Another class of types and functions provided by libbpf API is "objects" +and functions to work with them. Objects are high-level abstractions +such as BPF program or BPF map. They're represented by corresponding +structures such as ``struct bpf_object``, ``struct bpf_program``, +``struct bpf_map``, etc. + +Structures are forward declared and access to their fields should be +provided via corresponding getters and setters rather than directly. + +These objects are associated with corresponding parts of ELF object that +contains compiled BPF programs. + +For example ``struct bpf_object`` represents ELF object itself created +from an ELF file or from a buffer, ``struct bpf_program`` represents a +program in ELF object and ``struct bpf_map`` is a map. + +Functions that work with an object have names built from object name, +double underscore and part that describes function purpose. + +For example ``bpf_object__open`` consists of the name of corresponding +object, ``bpf_object``, double underscore and ``open`` that defines the +purpose of the function to open ELF file and create ``bpf_object`` from +it. + +All objects and corresponding functions other than BTF related should go +to ``libbpf.h``. BTF types and functions should go to ``btf.h``. + +Auxiliary functions +------------------- + +Auxiliary functions and types that don't fit well in any of categories +described above should have ``libbpf_`` prefix, e.g. +``libbpf_get_error`` or ``libbpf_prog_type_by_name``. + +ABI +--- + +libbpf can be both linked statically or used as DSO. To avoid possible +conflicts with other libraries an application is linked with, all +non-static libbpf symbols should have one of the prefixes mentioned in +API documentation above. See API naming convention to choose the right +name for a new symbol. + +Symbol visibility +----------------- + +libbpf follow the model when all global symbols have visibility "hidden" +by default and to make a symbol visible it has to be explicitly +attributed with ``LIBBPF_API`` macro. For example: + +.. code-block:: c + + LIBBPF_API int bpf_prog_get_fd_by_id(__u32 id); + +This prevents from accidentally exporting a symbol, that is not supposed +to be a part of ABI what, in turn, improves both libbpf developer- and +user-experiences. + +ABI versionning +--------------- + +To make future ABI extensions possible libbpf ABI is versioned. +Versioning is implemented by ``libbpf.map`` version script that is +passed to linker. + +Version name is ``LIBBPF_`` prefix + three-component numeric version, +starting from ``0.0.1``. + +Every time ABI is being changed, e.g. because a new symbol is added or +semantic of existing symbol is changed, ABI version should be bumped. +This bump in ABI version is at most once per kernel development cycle. + +For example, if current state of ``libbpf.map`` is: + +.. code-block:: none + + LIBBPF_0.0.1 { + global: + bpf_func_a; + bpf_func_b; + local: + \*; + }; + +, and a new symbol ``bpf_func_c`` is being introduced, then +``libbpf.map`` should be changed like this: + +.. code-block:: none + + LIBBPF_0.0.1 { + global: + bpf_func_a; + bpf_func_b; + local: + \*; + }; + LIBBPF_0.0.2 { + global: + bpf_func_c; + } LIBBPF_0.0.1; + +, where new version ``LIBBPF_0.0.2`` depends on the previous +``LIBBPF_0.0.1``. + +Format of version script and ways to handle ABI changes, including +incompatible ones, described in details in [1]. + +Stand-alone build +------------------- + +Under https://github.com/libbpf/libbpf there is a (semi-)automated +mirror of the mainline's version of libbpf for a stand-alone build. + +However, all changes to libbpf's code base must be upstreamed through +the mainline kernel tree. + + +API documentation convention +============================ + +The libbpf API is documented via comments above definitions in +header files. These comments can be rendered by doxygen and sphinx +for well organized html output. This section describes the +convention in which these comments should be formated. + +Here is an example from btf.h: + +.. code-block:: c + + /** + * @brief **btf__new()** creates a new instance of a BTF object from the raw + * bytes of an ELF's BTF section + * @param data raw bytes + * @param size number of bytes passed in `data` + * @return new BTF object instance which has to be eventually freed with + * **btf__free()** + * + * On error, error-code-encoded-as-pointer is returned, not a NULL. To extract + * error code from such a pointer `libbpf_get_error()` should be used. If + * `libbpf_set_strict_mode(LIBBPF_STRICT_CLEAN_PTRS)` is enabled, NULL is + * returned on error instead. In both cases thread-local `errno` variable is + * always set to error code as well. + */ + +The comment must start with a block comment of the form '/\*\*'. + +The documentation always starts with a @brief directive. This line is a short +description about this API. It starts with the name of the API, denoted in bold +like so: **api_name**. Please include an open and close parenthesis if this is a +function. Follow with the short description of the API. A longer form description +can be added below the last directive, at the bottom of the comment. + +Parameters are denoted with the @param directive, there should be one for each +parameter. If this is a function with a non-void return, use the @return directive +to document it. + +License +------------------- + +libbpf is dual-licensed under LGPL 2.1 and BSD 2-Clause. + +Links +------------------- + +[1] https://www.akkadia.org/drepper/dsohowto.pdf + (Chapter 3. Maintaining APIs and ABIs). diff --git a/Documentation/bpf/linux-notes.rst b/Documentation/bpf/linux-notes.rst new file mode 100644 index 000000000..956b0c866 --- /dev/null +++ b/Documentation/bpf/linux-notes.rst @@ -0,0 +1,53 @@ +.. contents:: +.. sectnum:: + +========================== +Linux implementation notes +========================== + +This document provides more details specific to the Linux kernel implementation of the eBPF instruction set. + +Byte swap instructions +====================== + +``BPF_FROM_LE`` and ``BPF_FROM_BE`` exist as aliases for ``BPF_TO_LE`` and ``BPF_TO_BE`` respectively. + +Legacy BPF Packet access instructions +===================================== + +As mentioned in the `ISA standard documentation <instruction-set.rst#legacy-bpf-packet-access-instructions>`_, +Linux has special eBPF instructions for access to packet data that have been +carried over from classic BPF to retain the performance of legacy socket +filters running in the eBPF interpreter. + +The instructions come in two forms: ``BPF_ABS | <size> | BPF_LD`` and +``BPF_IND | <size> | BPF_LD``. + +These instructions are used to access packet data and can only be used when +the program context is a pointer to a networking packet. ``BPF_ABS`` +accesses packet data at an absolute offset specified by the immediate data +and ``BPF_IND`` access packet data at an offset that includes the value of +a register in addition to the immediate data. + +These instructions have seven implicit operands: + +* Register R6 is an implicit input that must contain a pointer to a + struct sk_buff. +* Register R0 is an implicit output which contains the data fetched from + the packet. +* Registers R1-R5 are scratch registers that are clobbered by the + instruction. + +These instructions have an implicit program exit condition as well. If an +eBPF program attempts access data beyond the packet boundary, the +program execution will be aborted. + +``BPF_ABS | BPF_W | BPF_LD`` (0x20) means:: + + R0 = ntohl(*(u32 *) ((struct sk_buff *) R6->data + imm)) + +where ``ntohl()`` converts a 32-bit value from network byte order to host byte order. + +``BPF_IND | BPF_W | BPF_LD`` (0x40) means:: + + R0 = ntohl(*(u32 *) ((struct sk_buff *) R6->data + src + imm)) diff --git a/Documentation/bpf/llvm_reloc.rst b/Documentation/bpf/llvm_reloc.rst new file mode 100644 index 000000000..ca8957d5b --- /dev/null +++ b/Documentation/bpf/llvm_reloc.rst @@ -0,0 +1,240 @@ +.. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) + +==================== +BPF LLVM Relocations +==================== + +This document describes LLVM BPF backend relocation types. + +Relocation Record +================= + +LLVM BPF backend records each relocation with the following 16-byte +ELF structure:: + + typedef struct + { + Elf64_Addr r_offset; // Offset from the beginning of section. + Elf64_Xword r_info; // Relocation type and symbol index. + } Elf64_Rel; + +For example, for the following code:: + + int g1 __attribute__((section("sec"))); + int g2 __attribute__((section("sec"))); + static volatile int l1 __attribute__((section("sec"))); + static volatile int l2 __attribute__((section("sec"))); + int test() { + return g1 + g2 + l1 + l2; + } + +Compiled with ``clang -target bpf -O2 -c test.c``, the following is +the code with ``llvm-objdump -dr test.o``:: + + 0: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll + 0000000000000000: R_BPF_64_64 g1 + 2: 61 11 00 00 00 00 00 00 r1 = *(u32 *)(r1 + 0) + 3: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll + 0000000000000018: R_BPF_64_64 g2 + 5: 61 20 00 00 00 00 00 00 r0 = *(u32 *)(r2 + 0) + 6: 0f 10 00 00 00 00 00 00 r0 += r1 + 7: 18 01 00 00 08 00 00 00 00 00 00 00 00 00 00 00 r1 = 8 ll + 0000000000000038: R_BPF_64_64 sec + 9: 61 11 00 00 00 00 00 00 r1 = *(u32 *)(r1 + 0) + 10: 0f 10 00 00 00 00 00 00 r0 += r1 + 11: 18 01 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 r1 = 12 ll + 0000000000000058: R_BPF_64_64 sec + 13: 61 11 00 00 00 00 00 00 r1 = *(u32 *)(r1 + 0) + 14: 0f 10 00 00 00 00 00 00 r0 += r1 + 15: 95 00 00 00 00 00 00 00 exit + +There are four relations in the above for four ``LD_imm64`` instructions. +The following ``llvm-readelf -r test.o`` shows the binary values of the four +relocations:: + + Relocation section '.rel.text' at offset 0x190 contains 4 entries: + Offset Info Type Symbol's Value Symbol's Name + 0000000000000000 0000000600000001 R_BPF_64_64 0000000000000000 g1 + 0000000000000018 0000000700000001 R_BPF_64_64 0000000000000004 g2 + 0000000000000038 0000000400000001 R_BPF_64_64 0000000000000000 sec + 0000000000000058 0000000400000001 R_BPF_64_64 0000000000000000 sec + +Each relocation is represented by ``Offset`` (8 bytes) and ``Info`` (8 bytes). +For example, the first relocation corresponds to the first instruction +(Offset 0x0) and the corresponding ``Info`` indicates the relocation type +of ``R_BPF_64_64`` (type 1) and the entry in the symbol table (entry 6). +The following is the symbol table with ``llvm-readelf -s test.o``:: + + Symbol table '.symtab' contains 8 entries: + Num: Value Size Type Bind Vis Ndx Name + 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND + 1: 0000000000000000 0 FILE LOCAL DEFAULT ABS test.c + 2: 0000000000000008 4 OBJECT LOCAL DEFAULT 4 l1 + 3: 000000000000000c 4 OBJECT LOCAL DEFAULT 4 l2 + 4: 0000000000000000 0 SECTION LOCAL DEFAULT 4 sec + 5: 0000000000000000 128 FUNC GLOBAL DEFAULT 2 test + 6: 0000000000000000 4 OBJECT GLOBAL DEFAULT 4 g1 + 7: 0000000000000004 4 OBJECT GLOBAL DEFAULT 4 g2 + +The 6th entry is global variable ``g1`` with value 0. + +Similarly, the second relocation is at ``.text`` offset ``0x18``, instruction 3, +for global variable ``g2`` which has a symbol value 4, the offset +from the start of ``.data`` section. + +The third and fourth relocations refers to static variables ``l1`` +and ``l2``. From ``.rel.text`` section above, it is not clear +which symbols they really refers to as they both refers to +symbol table entry 4, symbol ``sec``, which has ``STT_SECTION`` type +and represents a section. So for static variable or function, +the section offset is written to the original insn +buffer, which is called ``A`` (addend). Looking at +above insn ``7`` and ``11``, they have section offset ``8`` and ``12``. +From symbol table, we can find that they correspond to entries ``2`` +and ``3`` for ``l1`` and ``l2``. + +In general, the ``A`` is 0 for global variables and functions, +and is the section offset or some computation result based on +section offset for static variables/functions. The non-section-offset +case refers to function calls. See below for more details. + +Different Relocation Types +========================== + +Six relocation types are supported. The following is an overview and +``S`` represents the value of the symbol in the symbol table:: + + Enum ELF Reloc Type Description BitSize Offset Calculation + 0 R_BPF_NONE None + 1 R_BPF_64_64 ld_imm64 insn 32 r_offset + 4 S + A + 2 R_BPF_64_ABS64 normal data 64 r_offset S + A + 3 R_BPF_64_ABS32 normal data 32 r_offset S + A + 4 R_BPF_64_NODYLD32 .BTF[.ext] data 32 r_offset S + A + 10 R_BPF_64_32 call insn 32 r_offset + 4 (S + A) / 8 - 1 + +For example, ``R_BPF_64_64`` relocation type is used for ``ld_imm64`` instruction. +The actual to-be-relocated data (0 or section offset) +is stored at ``r_offset + 4`` and the read/write +data bitsize is 32 (4 bytes). The relocation can be resolved with +the symbol value plus implicit addend. Note that the ``BitSize`` is 32 which +means the section offset must be less than or equal to ``UINT32_MAX`` and this +is enforced by LLVM BPF backend. + +In another case, ``R_BPF_64_ABS64`` relocation type is used for normal 64-bit data. +The actual to-be-relocated data is stored at ``r_offset`` and the read/write data +bitsize is 64 (8 bytes). The relocation can be resolved with +the symbol value plus implicit addend. + +Both ``R_BPF_64_ABS32`` and ``R_BPF_64_NODYLD32`` types are for 32-bit data. +But ``R_BPF_64_NODYLD32`` specifically refers to relocations in ``.BTF`` and +``.BTF.ext`` sections. For cases like bcc where llvm ``ExecutionEngine RuntimeDyld`` +is involved, ``R_BPF_64_NODYLD32`` types of relocations should not be resolved +to actual function/variable address. Otherwise, ``.BTF`` and ``.BTF.ext`` +become unusable by bcc and kernel. + +Type ``R_BPF_64_32`` is used for call instruction. The call target section +offset is stored at ``r_offset + 4`` (32bit) and calculated as +``(S + A) / 8 - 1``. + +Examples +======== + +Types ``R_BPF_64_64`` and ``R_BPF_64_32`` are used to resolve ``ld_imm64`` +and ``call`` instructions. For example:: + + __attribute__((noinline)) __attribute__((section("sec1"))) + int gfunc(int a, int b) { + return a * b; + } + static __attribute__((noinline)) __attribute__((section("sec1"))) + int lfunc(int a, int b) { + return a + b; + } + int global __attribute__((section("sec2"))); + int test(int a, int b) { + return gfunc(a, b) + lfunc(a, b) + global; + } + +Compiled with ``clang -target bpf -O2 -c test.c``, we will have +following code with `llvm-objdump -dr test.o``:: + + Disassembly of section .text: + + 0000000000000000 <test>: + 0: bf 26 00 00 00 00 00 00 r6 = r2 + 1: bf 17 00 00 00 00 00 00 r7 = r1 + 2: 85 10 00 00 ff ff ff ff call -1 + 0000000000000010: R_BPF_64_32 gfunc + 3: bf 08 00 00 00 00 00 00 r8 = r0 + 4: bf 71 00 00 00 00 00 00 r1 = r7 + 5: bf 62 00 00 00 00 00 00 r2 = r6 + 6: 85 10 00 00 02 00 00 00 call 2 + 0000000000000030: R_BPF_64_32 sec1 + 7: 0f 80 00 00 00 00 00 00 r0 += r8 + 8: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll + 0000000000000040: R_BPF_64_64 global + 10: 61 11 00 00 00 00 00 00 r1 = *(u32 *)(r1 + 0) + 11: 0f 10 00 00 00 00 00 00 r0 += r1 + 12: 95 00 00 00 00 00 00 00 exit + + Disassembly of section sec1: + + 0000000000000000 <gfunc>: + 0: bf 20 00 00 00 00 00 00 r0 = r2 + 1: 2f 10 00 00 00 00 00 00 r0 *= r1 + 2: 95 00 00 00 00 00 00 00 exit + + 0000000000000018 <lfunc>: + 3: bf 20 00 00 00 00 00 00 r0 = r2 + 4: 0f 10 00 00 00 00 00 00 r0 += r1 + 5: 95 00 00 00 00 00 00 00 exit + +The first relocation corresponds to ``gfunc(a, b)`` where ``gfunc`` has a value of 0, +so the ``call`` instruction offset is ``(0 + 0)/8 - 1 = -1``. +The second relocation corresponds to ``lfunc(a, b)`` where ``lfunc`` has a section +offset ``0x18``, so the ``call`` instruction offset is ``(0 + 0x18)/8 - 1 = 2``. +The third relocation corresponds to ld_imm64 of ``global``, which has a section +offset ``0``. + +The following is an example to show how R_BPF_64_ABS64 could be generated:: + + int global() { return 0; } + struct t { void *g; } gbl = { global }; + +Compiled with ``clang -target bpf -O2 -g -c test.c``, we will see a +relocation below in ``.data`` section with command +``llvm-readelf -r test.o``:: + + Relocation section '.rel.data' at offset 0x458 contains 1 entries: + Offset Info Type Symbol's Value Symbol's Name + 0000000000000000 0000000700000002 R_BPF_64_ABS64 0000000000000000 global + +The relocation says the first 8-byte of ``.data`` section should be +filled with address of ``global`` variable. + +With ``llvm-readelf`` output, we can see that dwarf sections have a bunch of +``R_BPF_64_ABS32`` and ``R_BPF_64_ABS64`` relocations:: + + Relocation section '.rel.debug_info' at offset 0x468 contains 13 entries: + Offset Info Type Symbol's Value Symbol's Name + 0000000000000006 0000000300000003 R_BPF_64_ABS32 0000000000000000 .debug_abbrev + 000000000000000c 0000000400000003 R_BPF_64_ABS32 0000000000000000 .debug_str + 0000000000000012 0000000400000003 R_BPF_64_ABS32 0000000000000000 .debug_str + 0000000000000016 0000000600000003 R_BPF_64_ABS32 0000000000000000 .debug_line + 000000000000001a 0000000400000003 R_BPF_64_ABS32 0000000000000000 .debug_str + 000000000000001e 0000000200000002 R_BPF_64_ABS64 0000000000000000 .text + 000000000000002b 0000000400000003 R_BPF_64_ABS32 0000000000000000 .debug_str + 0000000000000037 0000000800000002 R_BPF_64_ABS64 0000000000000000 gbl + 0000000000000040 0000000400000003 R_BPF_64_ABS32 0000000000000000 .debug_str + ...... + +The .BTF/.BTF.ext sections has R_BPF_64_NODYLD32 relocations:: + + Relocation section '.rel.BTF' at offset 0x538 contains 1 entries: + Offset Info Type Symbol's Value Symbol's Name + 0000000000000084 0000000800000004 R_BPF_64_NODYLD32 0000000000000000 gbl + + Relocation section '.rel.BTF.ext' at offset 0x548 contains 2 entries: + Offset Info Type Symbol's Value Symbol's Name + 000000000000002c 0000000200000004 R_BPF_64_NODYLD32 0000000000000000 .text + 0000000000000040 0000000200000004 R_BPF_64_NODYLD32 0000000000000000 .text diff --git a/Documentation/bpf/map_cgroup_storage.rst b/Documentation/bpf/map_cgroup_storage.rst new file mode 100644 index 000000000..8e5fe532c --- /dev/null +++ b/Documentation/bpf/map_cgroup_storage.rst @@ -0,0 +1,169 @@ +.. SPDX-License-Identifier: GPL-2.0-only +.. Copyright (C) 2020 Google LLC. + +=========================== +BPF_MAP_TYPE_CGROUP_STORAGE +=========================== + +The ``BPF_MAP_TYPE_CGROUP_STORAGE`` map type represents a local fix-sized +storage. It is only available with ``CONFIG_CGROUP_BPF``, and to programs that +attach to cgroups; the programs are made available by the same Kconfig. The +storage is identified by the cgroup the program is attached to. + +The map provide a local storage at the cgroup that the BPF program is attached +to. It provides a faster and simpler access than the general purpose hash +table, which performs a hash table lookups, and requires user to track live +cgroups on their own. + +This document describes the usage and semantics of the +``BPF_MAP_TYPE_CGROUP_STORAGE`` map type. Some of its behaviors was changed in +Linux 5.9 and this document will describe the differences. + +Usage +===== + +The map uses key of type of either ``__u64 cgroup_inode_id`` or +``struct bpf_cgroup_storage_key``, declared in ``linux/bpf.h``:: + + struct bpf_cgroup_storage_key { + __u64 cgroup_inode_id; + __u32 attach_type; + }; + +``cgroup_inode_id`` is the inode id of the cgroup directory. +``attach_type`` is the program's attach type. + +Linux 5.9 added support for type ``__u64 cgroup_inode_id`` as the key type. +When this key type is used, then all attach types of the particular cgroup and +map will share the same storage. Otherwise, if the type is +``struct bpf_cgroup_storage_key``, then programs of different attach types +be isolated and see different storages. + +To access the storage in a program, use ``bpf_get_local_storage``:: + + void *bpf_get_local_storage(void *map, u64 flags) + +``flags`` is reserved for future use and must be 0. + +There is no implicit synchronization. Storages of ``BPF_MAP_TYPE_CGROUP_STORAGE`` +can be accessed by multiple programs across different CPUs, and user should +take care of synchronization by themselves. The bpf infrastructure provides +``struct bpf_spin_lock`` to synchronize the storage. See +``tools/testing/selftests/bpf/progs/test_spin_lock.c``. + +Examples +======== + +Usage with key type as ``struct bpf_cgroup_storage_key``:: + + #include <bpf/bpf.h> + + struct { + __uint(type, BPF_MAP_TYPE_CGROUP_STORAGE); + __type(key, struct bpf_cgroup_storage_key); + __type(value, __u32); + } cgroup_storage SEC(".maps"); + + int program(struct __sk_buff *skb) + { + __u32 *ptr = bpf_get_local_storage(&cgroup_storage, 0); + __sync_fetch_and_add(ptr, 1); + + return 0; + } + +Userspace accessing map declared above:: + + #include <linux/bpf.h> + #include <linux/libbpf.h> + + __u32 map_lookup(struct bpf_map *map, __u64 cgrp, enum bpf_attach_type type) + { + struct bpf_cgroup_storage_key = { + .cgroup_inode_id = cgrp, + .attach_type = type, + }; + __u32 value; + bpf_map_lookup_elem(bpf_map__fd(map), &key, &value); + // error checking omitted + return value; + } + +Alternatively, using just ``__u64 cgroup_inode_id`` as key type:: + + #include <bpf/bpf.h> + + struct { + __uint(type, BPF_MAP_TYPE_CGROUP_STORAGE); + __type(key, __u64); + __type(value, __u32); + } cgroup_storage SEC(".maps"); + + int program(struct __sk_buff *skb) + { + __u32 *ptr = bpf_get_local_storage(&cgroup_storage, 0); + __sync_fetch_and_add(ptr, 1); + + return 0; + } + +And userspace:: + + #include <linux/bpf.h> + #include <linux/libbpf.h> + + __u32 map_lookup(struct bpf_map *map, __u64 cgrp, enum bpf_attach_type type) + { + __u32 value; + bpf_map_lookup_elem(bpf_map__fd(map), &cgrp, &value); + // error checking omitted + return value; + } + +Semantics +========= + +``BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE`` is a variant of this map type. This +per-CPU variant will have different memory regions for each CPU for each +storage. The non-per-CPU will have the same memory region for each storage. + +Prior to Linux 5.9, the lifetime of a storage is precisely per-attachment, and +for a single ``CGROUP_STORAGE`` map, there can be at most one program loaded +that uses the map. A program may be attached to multiple cgroups or have +multiple attach types, and each attach creates a fresh zeroed storage. The +storage is freed upon detach. + +There is a one-to-one association between the map of each type (per-CPU and +non-per-CPU) and the BPF program during load verification time. As a result, +each map can only be used by one BPF program and each BPF program can only use +one storage map of each type. Because of map can only be used by one BPF +program, sharing of this cgroup's storage with other BPF programs were +impossible. + +Since Linux 5.9, storage can be shared by multiple programs. When a program is +attached to a cgroup, the kernel would create a new storage only if the map +does not already contain an entry for the cgroup and attach type pair, or else +the old storage is reused for the new attachment. If the map is attach type +shared, then attach type is simply ignored during comparison. Storage is freed +only when either the map or the cgroup attached to is being freed. Detaching +will not directly free the storage, but it may cause the reference to the map +to reach zero and indirectly freeing all storage in the map. + +The map is not associated with any BPF program, thus making sharing possible. +However, the BPF program can still only associate with one map of each type +(per-CPU and non-per-CPU). A BPF program cannot use more than one +``BPF_MAP_TYPE_CGROUP_STORAGE`` or more than one +``BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE``. + +In all versions, userspace may use the attach parameters of cgroup and +attach type pair in ``struct bpf_cgroup_storage_key`` as the key to the BPF map +APIs to read or update the storage for a given attachment. For Linux 5.9 +attach type shared storages, only the first value in the struct, cgroup inode +id, is used during comparison, so userspace may just specify a ``__u64`` +directly. + +The storage is bound at attach time. Even if the program is attached to parent +and triggers in child, the storage still belongs to the parent. + +Userspace cannot create a new entry in the map or delete an existing entry. +Program test runs always use a temporary storage. diff --git a/Documentation/bpf/map_hash.rst b/Documentation/bpf/map_hash.rst new file mode 100644 index 000000000..e85120878 --- /dev/null +++ b/Documentation/bpf/map_hash.rst @@ -0,0 +1,185 @@ +.. SPDX-License-Identifier: GPL-2.0-only +.. Copyright (C) 2022 Red Hat, Inc. + +=============================================== +BPF_MAP_TYPE_HASH, with PERCPU and LRU Variants +=============================================== + +.. note:: + - ``BPF_MAP_TYPE_HASH`` was introduced in kernel version 3.19 + - ``BPF_MAP_TYPE_PERCPU_HASH`` was introduced in version 4.6 + - Both ``BPF_MAP_TYPE_LRU_HASH`` and ``BPF_MAP_TYPE_LRU_PERCPU_HASH`` + were introduced in version 4.10 + +``BPF_MAP_TYPE_HASH`` and ``BPF_MAP_TYPE_PERCPU_HASH`` provide general +purpose hash map storage. Both the key and the value can be structs, +allowing for composite keys and values. + +The kernel is responsible for allocating and freeing key/value pairs, up +to the max_entries limit that you specify. Hash maps use pre-allocation +of hash table elements by default. The ``BPF_F_NO_PREALLOC`` flag can be +used to disable pre-allocation when it is too memory expensive. + +``BPF_MAP_TYPE_PERCPU_HASH`` provides a separate value slot per +CPU. The per-cpu values are stored internally in an array. + +The ``BPF_MAP_TYPE_LRU_HASH`` and ``BPF_MAP_TYPE_LRU_PERCPU_HASH`` +variants add LRU semantics to their respective hash tables. An LRU hash +will automatically evict the least recently used entries when the hash +table reaches capacity. An LRU hash maintains an internal LRU list that +is used to select elements for eviction. This internal LRU list is +shared across CPUs but it is possible to request a per CPU LRU list with +the ``BPF_F_NO_COMMON_LRU`` flag when calling ``bpf_map_create``. + +Usage +===== + +.. c:function:: + long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags) + +Hash entries can be added or updated using the ``bpf_map_update_elem()`` +helper. This helper replaces existing elements atomically. The ``flags`` +parameter can be used to control the update behaviour: + +- ``BPF_ANY`` will create a new element or update an existing element +- ``BPF_NOEXIST`` will create a new element only if one did not already + exist +- ``BPF_EXIST`` will update an existing element + +``bpf_map_update_elem()`` returns 0 on success, or negative error in +case of failure. + +.. c:function:: + void *bpf_map_lookup_elem(struct bpf_map *map, const void *key) + +Hash entries can be retrieved using the ``bpf_map_lookup_elem()`` +helper. This helper returns a pointer to the value associated with +``key``, or ``NULL`` if no entry was found. + +.. c:function:: + long bpf_map_delete_elem(struct bpf_map *map, const void *key) + +Hash entries can be deleted using the ``bpf_map_delete_elem()`` +helper. This helper will return 0 on success, or negative error in case +of failure. + +Per CPU Hashes +-------------- + +For ``BPF_MAP_TYPE_PERCPU_HASH`` and ``BPF_MAP_TYPE_LRU_PERCPU_HASH`` +the ``bpf_map_update_elem()`` and ``bpf_map_lookup_elem()`` helpers +automatically access the hash slot for the current CPU. + +.. c:function:: + void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu) + +The ``bpf_map_lookup_percpu_elem()`` helper can be used to lookup the +value in the hash slot for a specific CPU. Returns value associated with +``key`` on ``cpu`` , or ``NULL`` if no entry was found or ``cpu`` is +invalid. + +Concurrency +----------- + +Values stored in ``BPF_MAP_TYPE_HASH`` can be accessed concurrently by +programs running on different CPUs. Since Kernel version 5.1, the BPF +infrastructure provides ``struct bpf_spin_lock`` to synchronise access. +See ``tools/testing/selftests/bpf/progs/test_spin_lock.c``. + +Userspace +--------- + +.. c:function:: + int bpf_map_get_next_key(int fd, const void *cur_key, void *next_key) + +In userspace, it is possible to iterate through the keys of a hash using +libbpf's ``bpf_map_get_next_key()`` function. The first key can be fetched by +calling ``bpf_map_get_next_key()`` with ``cur_key`` set to +``NULL``. Subsequent calls will fetch the next key that follows the +current key. ``bpf_map_get_next_key()`` returns 0 on success, -ENOENT if +cur_key is the last key in the hash, or negative error in case of +failure. + +Note that if ``cur_key`` gets deleted then ``bpf_map_get_next_key()`` +will instead return the *first* key in the hash table which is +undesirable. It is recommended to use batched lookup if there is going +to be key deletion intermixed with ``bpf_map_get_next_key()``. + +Examples +======== + +Please see the ``tools/testing/selftests/bpf`` directory for functional +examples. The code snippets below demonstrates API usage. + +This example shows how to declare an LRU Hash with a struct key and a +struct value. + +.. code-block:: c + + #include <linux/bpf.h> + #include <bpf/bpf_helpers.h> + + struct key { + __u32 srcip; + }; + + struct value { + __u64 packets; + __u64 bytes; + }; + + struct { + __uint(type, BPF_MAP_TYPE_LRU_HASH); + __uint(max_entries, 32); + __type(key, struct key); + __type(value, struct value); + } packet_stats SEC(".maps"); + +This example shows how to create or update hash values using atomic +instructions: + +.. code-block:: c + + static void update_stats(__u32 srcip, int bytes) + { + struct key key = { + .srcip = srcip, + }; + struct value *value = bpf_map_lookup_elem(&packet_stats, &key); + + if (value) { + __sync_fetch_and_add(&value->packets, 1); + __sync_fetch_and_add(&value->bytes, bytes); + } else { + struct value newval = { 1, bytes }; + + bpf_map_update_elem(&packet_stats, &key, &newval, BPF_NOEXIST); + } + } + +Userspace walking the map elements from the map declared above: + +.. code-block:: c + + #include <bpf/libbpf.h> + #include <bpf/bpf.h> + + static void walk_hash_elements(int map_fd) + { + struct key *cur_key = NULL; + struct key next_key; + struct value value; + int err; + + for (;;) { + err = bpf_map_get_next_key(map_fd, cur_key, &next_key); + if (err) + break; + + bpf_map_lookup_elem(map_fd, &next_key, &value); + + // Use key and value here + + cur_key = &next_key; + } + } diff --git a/Documentation/bpf/maps.rst b/Documentation/bpf/maps.rst new file mode 100644 index 000000000..f41619e31 --- /dev/null +++ b/Documentation/bpf/maps.rst @@ -0,0 +1,52 @@ + +========= +eBPF maps +========= + +'maps' is a generic storage of different types for sharing data between kernel +and userspace. + +The maps are accessed from user space via BPF syscall, which has commands: + +- create a map with given type and attributes + ``map_fd = bpf(BPF_MAP_CREATE, union bpf_attr *attr, u32 size)`` + using attr->map_type, attr->key_size, attr->value_size, attr->max_entries + returns process-local file descriptor or negative error + +- lookup key in a given map + ``err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size)`` + using attr->map_fd, attr->key, attr->value + returns zero and stores found elem into value or negative error + +- create or update key/value pair in a given map + ``err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size)`` + using attr->map_fd, attr->key, attr->value + returns zero or negative error + +- find and delete element by key in a given map + ``err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size)`` + using attr->map_fd, attr->key + +- to delete map: close(fd) + Exiting process will delete maps automatically + +userspace programs use this syscall to create/access maps that eBPF programs +are concurrently updating. + +maps can have different types: hash, array, bloom filter, radix-tree, etc. + +The map is defined by: + + - type + - max number of elements + - key size in bytes + - value size in bytes + +Map Types +========= + +.. toctree:: + :maxdepth: 1 + :glob: + + map_*
\ No newline at end of file diff --git a/Documentation/bpf/other.rst b/Documentation/bpf/other.rst new file mode 100644 index 000000000..3d6196340 --- /dev/null +++ b/Documentation/bpf/other.rst @@ -0,0 +1,9 @@ +===== +Other +===== + +.. toctree:: + :maxdepth: 1 + + ringbuf + llvm_reloc
\ No newline at end of file diff --git a/Documentation/bpf/prog_cgroup_sockopt.rst b/Documentation/bpf/prog_cgroup_sockopt.rst new file mode 100644 index 000000000..172f95720 --- /dev/null +++ b/Documentation/bpf/prog_cgroup_sockopt.rst @@ -0,0 +1,107 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================ +BPF_PROG_TYPE_CGROUP_SOCKOPT +============================ + +``BPF_PROG_TYPE_CGROUP_SOCKOPT`` program type can be attached to two +cgroup hooks: + +* ``BPF_CGROUP_GETSOCKOPT`` - called every time process executes ``getsockopt`` + system call. +* ``BPF_CGROUP_SETSOCKOPT`` - called every time process executes ``setsockopt`` + system call. + +The context (``struct bpf_sockopt``) has associated socket (``sk``) and +all input arguments: ``level``, ``optname``, ``optval`` and ``optlen``. + +BPF_CGROUP_SETSOCKOPT +===================== + +``BPF_CGROUP_SETSOCKOPT`` is triggered *before* the kernel handling of +sockopt and it has writable context: it can modify the supplied arguments +before passing them down to the kernel. This hook has access to the cgroup +and socket local storage. + +If BPF program sets ``optlen`` to -1, the control will be returned +back to the userspace after all other BPF programs in the cgroup +chain finish (i.e. kernel ``setsockopt`` handling will *not* be executed). + +Note, that ``optlen`` can not be increased beyond the user-supplied +value. It can only be decreased or set to -1. Any other value will +trigger ``EFAULT``. + +Return Type +----------- + +* ``0`` - reject the syscall, ``EPERM`` will be returned to the userspace. +* ``1`` - success, continue with next BPF program in the cgroup chain. + +BPF_CGROUP_GETSOCKOPT +===================== + +``BPF_CGROUP_GETSOCKOPT`` is triggered *after* the kernel handing of +sockopt. The BPF hook can observe ``optval``, ``optlen`` and ``retval`` +if it's interested in whatever kernel has returned. BPF hook can override +the values above, adjust ``optlen`` and reset ``retval`` to 0. If ``optlen`` +has been increased above initial ``getsockopt`` value (i.e. userspace +buffer is too small), ``EFAULT`` is returned. + +This hook has access to the cgroup and socket local storage. + +Note, that the only acceptable value to set to ``retval`` is 0 and the +original value that the kernel returned. Any other value will trigger +``EFAULT``. + +Return Type +----------- + +* ``0`` - reject the syscall, ``EPERM`` will be returned to the userspace. +* ``1`` - success: copy ``optval`` and ``optlen`` to userspace, return + ``retval`` from the syscall (note that this can be overwritten by + the BPF program from the parent cgroup). + +Cgroup Inheritance +================== + +Suppose, there is the following cgroup hierarchy where each cgroup +has ``BPF_CGROUP_GETSOCKOPT`` attached at each level with +``BPF_F_ALLOW_MULTI`` flag:: + + A (root, parent) + \ + B (child) + +When the application calls ``getsockopt`` syscall from the cgroup B, +the programs are executed from the bottom up: B, A. First program +(B) sees the result of kernel's ``getsockopt``. It can optionally +adjust ``optval``, ``optlen`` and reset ``retval`` to 0. After that +control will be passed to the second (A) program which will see the +same context as B including any potential modifications. + +Same for ``BPF_CGROUP_SETSOCKOPT``: if the program is attached to +A and B, the trigger order is B, then A. If B does any changes +to the input arguments (``level``, ``optname``, ``optval``, ``optlen``), +then the next program in the chain (A) will see those changes, +*not* the original input ``setsockopt`` arguments. The potentially +modified values will be then passed down to the kernel. + +Large optval +============ +When the ``optval`` is greater than the ``PAGE_SIZE``, the BPF program +can access only the first ``PAGE_SIZE`` of that data. So it has to options: + +* Set ``optlen`` to zero, which indicates that the kernel should + use the original buffer from the userspace. Any modifications + done by the BPF program to the ``optval`` are ignored. +* Set ``optlen`` to the value less than ``PAGE_SIZE``, which + indicates that the kernel should use BPF's trimmed ``optval``. + +When the BPF program returns with the ``optlen`` greater than +``PAGE_SIZE``, the userspace will receive ``EFAULT`` errno. + +Example +======= + +See ``tools/testing/selftests/bpf/progs/sockopt_sk.c`` for an example +of BPF program that handles socket options. diff --git a/Documentation/bpf/prog_cgroup_sysctl.rst b/Documentation/bpf/prog_cgroup_sysctl.rst new file mode 100644 index 000000000..677d6c637 --- /dev/null +++ b/Documentation/bpf/prog_cgroup_sysctl.rst @@ -0,0 +1,125 @@ +.. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) + +=========================== +BPF_PROG_TYPE_CGROUP_SYSCTL +=========================== + +This document describes ``BPF_PROG_TYPE_CGROUP_SYSCTL`` program type that +provides cgroup-bpf hook for sysctl. + +The hook has to be attached to a cgroup and will be called every time a +process inside that cgroup tries to read from or write to sysctl knob in proc. + +1. Attach type +************** + +``BPF_CGROUP_SYSCTL`` attach type has to be used to attach +``BPF_PROG_TYPE_CGROUP_SYSCTL`` program to a cgroup. + +2. Context +********** + +``BPF_PROG_TYPE_CGROUP_SYSCTL`` provides access to the following context from +BPF program:: + + struct bpf_sysctl { + __u32 write; + __u32 file_pos; + }; + +* ``write`` indicates whether sysctl value is being read (``0``) or written + (``1``). This field is read-only. + +* ``file_pos`` indicates file position sysctl is being accessed at, read + or written. This field is read-write. Writing to the field sets the starting + position in sysctl proc file ``read(2)`` will be reading from or ``write(2)`` + will be writing to. Writing zero to the field can be used e.g. to override + whole sysctl value by ``bpf_sysctl_set_new_value()`` on ``write(2)`` even + when it's called by user space on ``file_pos > 0``. Writing non-zero + value to the field can be used to access part of sysctl value starting from + specified ``file_pos``. Not all sysctl support access with ``file_pos != + 0``, e.g. writes to numeric sysctl entries must always be at file position + ``0``. See also ``kernel.sysctl_writes_strict`` sysctl. + +See `linux/bpf.h`_ for more details on how context field can be accessed. + +3. Return code +************** + +``BPF_PROG_TYPE_CGROUP_SYSCTL`` program must return one of the following +return codes: + +* ``0`` means "reject access to sysctl"; +* ``1`` means "proceed with access". + +If program returns ``0`` user space will get ``-1`` from ``read(2)`` or +``write(2)`` and ``errno`` will be set to ``EPERM``. + +4. Helpers +********** + +Since sysctl knob is represented by a name and a value, sysctl specific BPF +helpers focus on providing access to these properties: + +* ``bpf_sysctl_get_name()`` to get sysctl name as it is visible in + ``/proc/sys`` into provided by BPF program buffer; + +* ``bpf_sysctl_get_current_value()`` to get string value currently held by + sysctl into provided by BPF program buffer. This helper is available on both + ``read(2)`` from and ``write(2)`` to sysctl; + +* ``bpf_sysctl_get_new_value()`` to get new string value currently being + written to sysctl before actual write happens. This helper can be used only + on ``ctx->write == 1``; + +* ``bpf_sysctl_set_new_value()`` to override new string value currently being + written to sysctl before actual write happens. Sysctl value will be + overridden starting from the current ``ctx->file_pos``. If the whole value + has to be overridden BPF program can set ``file_pos`` to zero before calling + to the helper. This helper can be used only on ``ctx->write == 1``. New + string value set by the helper is treated and verified by kernel same way as + an equivalent string passed by user space. + +BPF program sees sysctl value same way as user space does in proc filesystem, +i.e. as a string. Since many sysctl values represent an integer or a vector +of integers, the following helpers can be used to get numeric value from the +string: + +* ``bpf_strtol()`` to convert initial part of the string to long integer + similar to user space `strtol(3)`_; +* ``bpf_strtoul()`` to convert initial part of the string to unsigned long + integer similar to user space `strtoul(3)`_; + +See `linux/bpf.h`_ for more details on helpers described here. + +5. Examples +*********** + +See `test_sysctl_prog.c`_ for an example of BPF program in C that access +sysctl name and value, parses string value to get vector of integers and uses +the result to make decision whether to allow or deny access to sysctl. + +6. Notes +******** + +``BPF_PROG_TYPE_CGROUP_SYSCTL`` is intended to be used in **trusted** root +environment, for example to monitor sysctl usage or catch unreasonable values +an application, running as root in a separate cgroup, is trying to set. + +Since `task_dfl_cgroup(current)` is called at `sys_read` / `sys_write` time it +may return results different from that at `sys_open` time, i.e. process that +opened sysctl file in proc filesystem may differ from process that is trying +to read from / write to it and two such processes may run in different +cgroups, what means ``BPF_PROG_TYPE_CGROUP_SYSCTL`` should not be used as a +security mechanism to limit sysctl usage. + +As with any cgroup-bpf program additional care should be taken if an +application running as root in a cgroup should not be allowed to +detach/replace BPF program attached by administrator. + +.. Links +.. _linux/bpf.h: ../../include/uapi/linux/bpf.h +.. _strtol(3): http://man7.org/linux/man-pages/man3/strtol.3p.html +.. _strtoul(3): http://man7.org/linux/man-pages/man3/strtoul.3p.html +.. _test_sysctl_prog.c: + ../../tools/testing/selftests/bpf/progs/test_sysctl_prog.c diff --git a/Documentation/bpf/prog_flow_dissector.rst b/Documentation/bpf/prog_flow_dissector.rst new file mode 100644 index 000000000..4d86780ab --- /dev/null +++ b/Documentation/bpf/prog_flow_dissector.rst @@ -0,0 +1,147 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================ +BPF_PROG_TYPE_FLOW_DISSECTOR +============================ + +Overview +======== + +Flow dissector is a routine that parses metadata out of the packets. It's +used in the various places in the networking subsystem (RFS, flow hash, etc). + +BPF flow dissector is an attempt to reimplement C-based flow dissector logic +in BPF to gain all the benefits of BPF verifier (namely, limits on the +number of instructions and tail calls). + +API +=== + +BPF flow dissector programs operate on an ``__sk_buff``. However, only the +limited set of fields is allowed: ``data``, ``data_end`` and ``flow_keys``. +``flow_keys`` is ``struct bpf_flow_keys`` and contains flow dissector input +and output arguments. + +The inputs are: + * ``nhoff`` - initial offset of the networking header + * ``thoff`` - initial offset of the transport header, initialized to nhoff + * ``n_proto`` - L3 protocol type, parsed out of L2 header + * ``flags`` - optional flags + +Flow dissector BPF program should fill out the rest of the ``struct +bpf_flow_keys`` fields. Input arguments ``nhoff/thoff/n_proto`` should be +also adjusted accordingly. + +The return code of the BPF program is either BPF_OK to indicate successful +dissection, or BPF_DROP to indicate parsing error. + +__sk_buff->data +=============== + +In the VLAN-less case, this is what the initial state of the BPF flow +dissector looks like:: + + +------+------+------------+-----------+ + | DMAC | SMAC | ETHER_TYPE | L3_HEADER | + +------+------+------------+-----------+ + ^ + | + +-- flow dissector starts here + + +.. code:: c + + skb->data + flow_keys->nhoff point to the first byte of L3_HEADER + flow_keys->thoff = nhoff + flow_keys->n_proto = ETHER_TYPE + +In case of VLAN, flow dissector can be called with the two different states. + +Pre-VLAN parsing:: + + +------+------+------+-----+-----------+-----------+ + | DMAC | SMAC | TPID | TCI |ETHER_TYPE | L3_HEADER | + +------+------+------+-----+-----------+-----------+ + ^ + | + +-- flow dissector starts here + +.. code:: c + + skb->data + flow_keys->nhoff point the to first byte of TCI + flow_keys->thoff = nhoff + flow_keys->n_proto = TPID + +Please note that TPID can be 802.1AD and, hence, BPF program would +have to parse VLAN information twice for double tagged packets. + + +Post-VLAN parsing:: + + +------+------+------+-----+-----------+-----------+ + | DMAC | SMAC | TPID | TCI |ETHER_TYPE | L3_HEADER | + +------+------+------+-----+-----------+-----------+ + ^ + | + +-- flow dissector starts here + +.. code:: c + + skb->data + flow_keys->nhoff point the to first byte of L3_HEADER + flow_keys->thoff = nhoff + flow_keys->n_proto = ETHER_TYPE + +In this case VLAN information has been processed before the flow dissector +and BPF flow dissector is not required to handle it. + + +The takeaway here is as follows: BPF flow dissector program can be called with +the optional VLAN header and should gracefully handle both cases: when single +or double VLAN is present and when it is not present. The same program +can be called for both cases and would have to be written carefully to +handle both cases. + + +Flags +===== + +``flow_keys->flags`` might contain optional input flags that work as follows: + +* ``BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG`` - tells BPF flow dissector to + continue parsing first fragment; the default expected behavior is that + flow dissector returns as soon as it finds out that the packet is fragmented; + used by ``eth_get_headlen`` to estimate length of all headers for GRO. +* ``BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL`` - tells BPF flow dissector to + stop parsing as soon as it reaches IPv6 flow label; used by + ``___skb_get_hash`` and ``__skb_get_hash_symmetric`` to get flow hash. +* ``BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP`` - tells BPF flow dissector to stop + parsing as soon as it reaches encapsulated headers; used by routing + infrastructure. + + +Reference Implementation +======================== + +See ``tools/testing/selftests/bpf/progs/bpf_flow.c`` for the reference +implementation and ``tools/testing/selftests/bpf/flow_dissector_load.[hc]`` +for the loader. bpftool can be used to load BPF flow dissector program as well. + +The reference implementation is organized as follows: + * ``jmp_table`` map that contains sub-programs for each supported L3 protocol + * ``_dissect`` routine - entry point; it does input ``n_proto`` parsing and + does ``bpf_tail_call`` to the appropriate L3 handler + +Since BPF at this point doesn't support looping (or any jumping back), +jmp_table is used instead to handle multiple levels of encapsulation (and +IPv6 options). + + +Current Limitations +=================== +BPF flow dissector doesn't support exporting all the metadata that in-kernel +C-based implementation can export. Notable example is single VLAN (802.1Q) +and double VLAN (802.1AD) tags. Please refer to the ``struct bpf_flow_keys`` +for a set of information that's currently can be exported from the BPF context. + +When BPF flow dissector is attached to the root network namespace (machine-wide +policy), users can't override it in their child network namespaces. diff --git a/Documentation/bpf/prog_lsm.rst b/Documentation/bpf/prog_lsm.rst new file mode 100644 index 000000000..0dc3fb0d9 --- /dev/null +++ b/Documentation/bpf/prog_lsm.rst @@ -0,0 +1,143 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. Copyright (C) 2020 Google LLC. + +================ +LSM BPF Programs +================ + +These BPF programs allow runtime instrumentation of the LSM hooks by privileged +users to implement system-wide MAC (Mandatory Access Control) and Audit +policies using eBPF. + +Structure +--------- + +The example shows an eBPF program that can be attached to the ``file_mprotect`` +LSM hook: + +.. c:function:: int file_mprotect(struct vm_area_struct *vma, unsigned long reqprot, unsigned long prot); + +Other LSM hooks which can be instrumented can be found in +``include/linux/lsm_hooks.h``. + +eBPF programs that use Documentation/bpf/btf.rst do not need to include kernel +headers for accessing information from the attached eBPF program's context. +They can simply declare the structures in the eBPF program and only specify +the fields that need to be accessed. + +.. code-block:: c + + struct mm_struct { + unsigned long start_brk, brk, start_stack; + } __attribute__((preserve_access_index)); + + struct vm_area_struct { + unsigned long start_brk, brk, start_stack; + unsigned long vm_start, vm_end; + struct mm_struct *vm_mm; + } __attribute__((preserve_access_index)); + + +.. note:: The order of the fields is irrelevant. + +This can be further simplified (if one has access to the BTF information at +build time) by generating the ``vmlinux.h`` with: + +.. code-block:: console + + # bpftool btf dump file <path-to-btf-vmlinux> format c > vmlinux.h + +.. note:: ``path-to-btf-vmlinux`` can be ``/sys/kernel/btf/vmlinux`` if the + build environment matches the environment the BPF programs are + deployed in. + +The ``vmlinux.h`` can then simply be included in the BPF programs without +requiring the definition of the types. + +The eBPF programs can be declared using the``BPF_PROG`` +macros defined in `tools/lib/bpf/bpf_tracing.h`_. In this +example: + + * ``"lsm/file_mprotect"`` indicates the LSM hook that the program must + be attached to + * ``mprotect_audit`` is the name of the eBPF program + +.. code-block:: c + + SEC("lsm/file_mprotect") + int BPF_PROG(mprotect_audit, struct vm_area_struct *vma, + unsigned long reqprot, unsigned long prot, int ret) + { + /* ret is the return value from the previous BPF program + * or 0 if it's the first hook. + */ + if (ret != 0) + return ret; + + int is_heap; + + is_heap = (vma->vm_start >= vma->vm_mm->start_brk && + vma->vm_end <= vma->vm_mm->brk); + + /* Return an -EPERM or write information to the perf events buffer + * for auditing + */ + if (is_heap) + return -EPERM; + } + +The ``__attribute__((preserve_access_index))`` is a clang feature that allows +the BPF verifier to update the offsets for the access at runtime using the +Documentation/bpf/btf.rst information. Since the BPF verifier is aware of the +types, it also validates all the accesses made to the various types in the +eBPF program. + +Loading +------- + +eBPF programs can be loaded with the :manpage:`bpf(2)` syscall's +``BPF_PROG_LOAD`` operation: + +.. code-block:: c + + struct bpf_object *obj; + + obj = bpf_object__open("./my_prog.o"); + bpf_object__load(obj); + +This can be simplified by using a skeleton header generated by ``bpftool``: + +.. code-block:: console + + # bpftool gen skeleton my_prog.o > my_prog.skel.h + +and the program can be loaded by including ``my_prog.skel.h`` and using +the generated helper, ``my_prog__open_and_load``. + +Attachment to LSM Hooks +----------------------- + +The LSM allows attachment of eBPF programs as LSM hooks using :manpage:`bpf(2)` +syscall's ``BPF_RAW_TRACEPOINT_OPEN`` operation or more simply by +using the libbpf helper ``bpf_program__attach_lsm``. + +The program can be detached from the LSM hook by *destroying* the ``link`` +link returned by ``bpf_program__attach_lsm`` using ``bpf_link__destroy``. + +One can also use the helpers generated in ``my_prog.skel.h`` i.e. +``my_prog__attach`` for attachment and ``my_prog__destroy`` for cleaning up. + +Examples +-------- + +An example eBPF program can be found in +`tools/testing/selftests/bpf/progs/lsm.c`_ and the corresponding +userspace code in `tools/testing/selftests/bpf/prog_tests/test_lsm.c`_ + +.. Links +.. _tools/lib/bpf/bpf_tracing.h: + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/lib/bpf/bpf_tracing.h +.. _tools/testing/selftests/bpf/progs/lsm.c: + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/progs/lsm.c +.. _tools/testing/selftests/bpf/prog_tests/test_lsm.c: + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/prog_tests/test_lsm.c diff --git a/Documentation/bpf/prog_sk_lookup.rst b/Documentation/bpf/prog_sk_lookup.rst new file mode 100644 index 000000000..85a305c19 --- /dev/null +++ b/Documentation/bpf/prog_sk_lookup.rst @@ -0,0 +1,98 @@ +.. SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +===================== +BPF sk_lookup program +===================== + +BPF sk_lookup program type (``BPF_PROG_TYPE_SK_LOOKUP``) introduces programmability +into the socket lookup performed by the transport layer when a packet is to be +delivered locally. + +When invoked BPF sk_lookup program can select a socket that will receive the +incoming packet by calling the ``bpf_sk_assign()`` BPF helper function. + +Hooks for a common attach point (``BPF_SK_LOOKUP``) exist for both TCP and UDP. + +Motivation +========== + +BPF sk_lookup program type was introduced to address setup scenarios where +binding sockets to an address with ``bind()`` socket call is impractical, such +as: + +1. receiving connections on a range of IP addresses, e.g. 192.0.2.0/24, when + binding to a wildcard address ``INADRR_ANY`` is not possible due to a port + conflict, +2. receiving connections on all or a wide range of ports, i.e. an L7 proxy use + case. + +Such setups would require creating and ``bind()``'ing one socket to each of the +IP address/port in the range, leading to resource consumption and potential +latency spikes during socket lookup. + +Attachment +========== + +BPF sk_lookup program can be attached to a network namespace with +``bpf(BPF_LINK_CREATE, ...)`` syscall using the ``BPF_SK_LOOKUP`` attach type and a +netns FD as attachment ``target_fd``. + +Multiple programs can be attached to one network namespace. Programs will be +invoked in the same order as they were attached. + +Hooks +===== + +The attached BPF sk_lookup programs run whenever the transport layer needs to +find a listening (TCP) or an unconnected (UDP) socket for an incoming packet. + +Incoming traffic to established (TCP) and connected (UDP) sockets is delivered +as usual without triggering the BPF sk_lookup hook. + +The attached BPF programs must return with either ``SK_PASS`` or ``SK_DROP`` +verdict code. As for other BPF program types that are network filters, +``SK_PASS`` signifies that the socket lookup should continue on to regular +hashtable-based lookup, while ``SK_DROP`` causes the transport layer to drop the +packet. + +A BPF sk_lookup program can also select a socket to receive the packet by +calling ``bpf_sk_assign()`` BPF helper. Typically, the program looks up a socket +in a map holding sockets, such as ``SOCKMAP`` or ``SOCKHASH``, and passes a +``struct bpf_sock *`` to ``bpf_sk_assign()`` helper to record the +selection. Selecting a socket only takes effect if the program has terminated +with ``SK_PASS`` code. + +When multiple programs are attached, the end result is determined from return +codes of all the programs according to the following rules: + +1. If any program returned ``SK_PASS`` and selected a valid socket, the socket + is used as the result of the socket lookup. +2. If more than one program returned ``SK_PASS`` and selected a socket, the last + selection takes effect. +3. If any program returned ``SK_DROP``, and no program returned ``SK_PASS`` and + selected a socket, socket lookup fails. +4. If all programs returned ``SK_PASS`` and none of them selected a socket, + socket lookup continues on. + +API +=== + +In its context, an instance of ``struct bpf_sk_lookup``, BPF sk_lookup program +receives information about the packet that triggered the socket lookup. Namely: + +* IP version (``AF_INET`` or ``AF_INET6``), +* L4 protocol identifier (``IPPROTO_TCP`` or ``IPPROTO_UDP``), +* source and destination IP address, +* source and destination L4 port, +* the socket that has been selected with ``bpf_sk_assign()``. + +Refer to ``struct bpf_sk_lookup`` declaration in ``linux/bpf.h`` user API +header, and `bpf-helpers(7) +<https://man7.org/linux/man-pages/man7/bpf-helpers.7.html>`_ man-page section +for ``bpf_sk_assign()`` for details. + +Example +======= + +See ``tools/testing/selftests/bpf/prog_tests/sk_lookup.c`` for the reference +implementation. diff --git a/Documentation/bpf/programs.rst b/Documentation/bpf/programs.rst new file mode 100644 index 000000000..620eb667a --- /dev/null +++ b/Documentation/bpf/programs.rst @@ -0,0 +1,9 @@ +============= +Program Types +============= + +.. toctree:: + :maxdepth: 1 + :glob: + + prog_* diff --git a/Documentation/bpf/ringbuf.rst b/Documentation/bpf/ringbuf.rst new file mode 100644 index 000000000..6a615cd62 --- /dev/null +++ b/Documentation/bpf/ringbuf.rst @@ -0,0 +1,206 @@ +=============== +BPF ring buffer +=============== + +This document describes BPF ring buffer design, API, and implementation details. + +.. contents:: + :local: + :depth: 2 + +Motivation +---------- + +There are two distinctive motivators for this work, which are not satisfied by +existing perf buffer, which prompted creation of a new ring buffer +implementation. + +- more efficient memory utilization by sharing ring buffer across CPUs; +- preserving ordering of events that happen sequentially in time, even across + multiple CPUs (e.g., fork/exec/exit events for a task). + +These two problems are independent, but perf buffer fails to satisfy both. +Both are a result of a choice to have per-CPU perf ring buffer. Both can be +also solved by having an MPSC implementation of ring buffer. The ordering +problem could technically be solved for perf buffer with some in-kernel +counting, but given the first one requires an MPSC buffer, the same solution +would solve the second problem automatically. + +Semantics and APIs +------------------ + +Single ring buffer is presented to BPF programs as an instance of BPF map of +type ``BPF_MAP_TYPE_RINGBUF``. Two other alternatives considered, but +ultimately rejected. + +One way would be to, similar to ``BPF_MAP_TYPE_PERF_EVENT_ARRAY``, make +``BPF_MAP_TYPE_RINGBUF`` could represent an array of ring buffers, but not +enforce "same CPU only" rule. This would be more familiar interface compatible +with existing perf buffer use in BPF, but would fail if application needed more +advanced logic to lookup ring buffer by arbitrary key. +``BPF_MAP_TYPE_HASH_OF_MAPS`` addresses this with current approach. +Additionally, given the performance of BPF ringbuf, many use cases would just +opt into a simple single ring buffer shared among all CPUs, for which current +approach would be an overkill. + +Another approach could introduce a new concept, alongside BPF map, to represent +generic "container" object, which doesn't necessarily have key/value interface +with lookup/update/delete operations. This approach would add a lot of extra +infrastructure that has to be built for observability and verifier support. It +would also add another concept that BPF developers would have to familiarize +themselves with, new syntax in libbpf, etc. But then would really provide no +additional benefits over the approach of using a map. ``BPF_MAP_TYPE_RINGBUF`` +doesn't support lookup/update/delete operations, but so doesn't few other map +types (e.g., queue and stack; array doesn't support delete, etc). + +The approach chosen has an advantage of re-using existing BPF map +infrastructure (introspection APIs in kernel, libbpf support, etc), being +familiar concept (no need to teach users a new type of object in BPF program), +and utilizing existing tooling (bpftool). For common scenario of using a single +ring buffer for all CPUs, it's as simple and straightforward, as would be with +a dedicated "container" object. On the other hand, by being a map, it can be +combined with ``ARRAY_OF_MAPS`` and ``HASH_OF_MAPS`` map-in-maps to implement +a wide variety of topologies, from one ring buffer for each CPU (e.g., as +a replacement for perf buffer use cases), to a complicated application +hashing/sharding of ring buffers (e.g., having a small pool of ring buffers +with hashed task's tgid being a look up key to preserve order, but reduce +contention). + +Key and value sizes are enforced to be zero. ``max_entries`` is used to specify +the size of ring buffer and has to be a power of 2 value. + +There are a bunch of similarities between perf buffer +(``BPF_MAP_TYPE_PERF_EVENT_ARRAY``) and new BPF ring buffer semantics: + +- variable-length records; +- if there is no more space left in ring buffer, reservation fails, no + blocking; +- memory-mappable data area for user-space applications for ease of + consumption and high performance; +- epoll notifications for new incoming data; +- but still the ability to do busy polling for new data to achieve the + lowest latency, if necessary. + +BPF ringbuf provides two sets of APIs to BPF programs: + +- ``bpf_ringbuf_output()`` allows to *copy* data from one place to a ring + buffer, similarly to ``bpf_perf_event_output()``; +- ``bpf_ringbuf_reserve()``/``bpf_ringbuf_commit()``/``bpf_ringbuf_discard()`` + APIs split the whole process into two steps. First, a fixed amount of space + is reserved. If successful, a pointer to a data inside ring buffer data + area is returned, which BPF programs can use similarly to a data inside + array/hash maps. Once ready, this piece of memory is either committed or + discarded. Discard is similar to commit, but makes consumer ignore the + record. + +``bpf_ringbuf_output()`` has disadvantage of incurring extra memory copy, +because record has to be prepared in some other place first. But it allows to +submit records of the length that's not known to verifier beforehand. It also +closely matches ``bpf_perf_event_output()``, so will simplify migration +significantly. + +``bpf_ringbuf_reserve()`` avoids the extra copy of memory by providing a memory +pointer directly to ring buffer memory. In a lot of cases records are larger +than BPF stack space allows, so many programs have use extra per-CPU array as +a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs +completely. But in exchange, it only allows a known constant size of memory to +be reserved, such that verifier can verify that BPF program can't access memory +outside its reserved record space. bpf_ringbuf_output(), while slightly slower +due to extra memory copy, covers some use cases that are not suitable for +``bpf_ringbuf_reserve()``. + +The difference between commit and discard is very small. Discard just marks +a record as discarded, and such records are supposed to be ignored by consumer +code. Discard is useful for some advanced use-cases, such as ensuring +all-or-nothing multi-record submission, or emulating temporary +``malloc()``/``free()`` within single BPF program invocation. + +Each reserved record is tracked by verifier through existing +reference-tracking logic, similar to socket ref-tracking. It is thus +impossible to reserve a record, but forget to submit (or discard) it. + +``bpf_ringbuf_query()`` helper allows to query various properties of ring +buffer. Currently 4 are supported: + +- ``BPF_RB_AVAIL_DATA`` returns amount of unconsumed data in ring buffer; +- ``BPF_RB_RING_SIZE`` returns the size of ring buffer; +- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical possition + of consumer/producer, respectively. + +Returned values are momentarily snapshots of ring buffer state and could be +off by the time helper returns, so this should be used only for +debugging/reporting reasons or for implementing various heuristics, that take +into account highly-changeable nature of some of those characteristics. + +One such heuristic might involve more fine-grained control over poll/epoll +notifications about new data availability in ring buffer. Together with +``BPF_RB_NO_WAKEUP``/``BPF_RB_FORCE_WAKEUP`` flags for output/commit/discard +helpers, it allows BPF program a high degree of control and, e.g., more +efficient batched notifications. Default self-balancing strategy, though, +should be adequate for most applications and will work reliable and efficiently +already. + +Design and Implementation +------------------------- + +This reserve/commit schema allows a natural way for multiple producers, either +on different CPUs or even on the same CPU/in the same BPF program, to reserve +independent records and work with them without blocking other producers. This +means that if BPF program was interruped by another BPF program sharing the +same ring buffer, they will both get a record reserved (provided there is +enough space left) and can work with it and submit it independently. This +applies to NMI context as well, except that due to using a spinlock during +reservation, in NMI context, ``bpf_ringbuf_reserve()`` might fail to get +a lock, in which case reservation will fail even if ring buffer is not full. + +The ring buffer itself internally is implemented as a power-of-2 sized +circular buffer, with two logical and ever-increasing counters (which might +wrap around on 32-bit architectures, that's not a problem): + +- consumer counter shows up to which logical position consumer consumed the + data; +- producer counter denotes amount of data reserved by all producers. + +Each time a record is reserved, producer that "owns" the record will +successfully advance producer counter. At that point, data is still not yet +ready to be consumed, though. Each record has 8 byte header, which contains the +length of reserved record, as well as two extra bits: busy bit to denote that +record is still being worked on, and discard bit, which might be set at commit +time if record is discarded. In the latter case, consumer is supposed to skip +the record and move on to the next one. Record header also encodes record's +relative offset from the beginning of ring buffer data area (in pages). This +allows ``bpf_ringbuf_commit()``/``bpf_ringbuf_discard()`` to accept only the +pointer to the record itself, without requiring also the pointer to ring buffer +itself. Ring buffer memory location will be restored from record metadata +header. This significantly simplifies verifier, as well as improving API +usability. + +Producer counter increments are serialized under spinlock, so there is +a strict ordering between reservations. Commits, on the other hand, are +completely lockless and independent. All records become available to consumer +in the order of reservations, but only after all previous records where +already committed. It is thus possible for slow producers to temporarily hold +off submitted records, that were reserved later. + +One interesting implementation bit, that significantly simplifies (and thus +speeds up as well) implementation of both producers and consumers is how data +area is mapped twice contiguously back-to-back in the virtual memory. This +allows to not take any special measures for samples that have to wrap around +at the end of the circular buffer data area, because the next page after the +last data page would be first data page again, and thus the sample will still +appear completely contiguous in virtual memory. See comment and a simple ASCII +diagram showing this visually in ``bpf_ringbuf_area_alloc()``. + +Another feature that distinguishes BPF ringbuf from perf ring buffer is +a self-pacing notifications of new data being availability. +``bpf_ringbuf_commit()`` implementation will send a notification of new record +being available after commit only if consumer has already caught up right up to +the record being committed. If not, consumer still has to catch up and thus +will see new data anyways without needing an extra poll notification. +Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbufs.c) show that +this allows to achieve a very high throughput without having to resort to +tricks like "notify only every Nth sample", which are necessary with perf +buffer. For extreme cases, when BPF program wants more manual control of +notifications, commit/discard/output helpers accept ``BPF_RB_NO_WAKEUP`` and +``BPF_RB_FORCE_WAKEUP`` flags, which give full control over notifications of +data availability, but require extra caution and diligence in using this API. diff --git a/Documentation/bpf/s390.rst b/Documentation/bpf/s390.rst new file mode 100644 index 000000000..21ecb309d --- /dev/null +++ b/Documentation/bpf/s390.rst @@ -0,0 +1,205 @@ +=================== +Testing BPF on s390 +=================== + +1. Introduction +*************** + +IBM Z are mainframe computers, which are descendants of IBM System/360 from +year 1964. They are supported by the Linux kernel under the name "s390". This +document describes how to test BPF in an s390 QEMU guest. + +2. One-time setup +***************** + +The following is required to build and run the test suite: + + * s390 GCC + * s390 development headers and libraries + * Clang with BPF support + * QEMU with s390 support + * Disk image with s390 rootfs + +Debian supports installing compiler and libraries for s390 out of the box. +Users of other distros may use debootstrap in order to set up a Debian chroot:: + + sudo debootstrap \ + --variant=minbase \ + --include=sudo \ + testing \ + ./s390-toolchain + sudo mount --rbind /dev ./s390-toolchain/dev + sudo mount --rbind /proc ./s390-toolchain/proc + sudo mount --rbind /sys ./s390-toolchain/sys + sudo chroot ./s390-toolchain + +Once on Debian, the build prerequisites can be installed as follows:: + + sudo dpkg --add-architecture s390x + sudo apt-get update + sudo apt-get install \ + bc \ + bison \ + cmake \ + debootstrap \ + dwarves \ + flex \ + g++ \ + gcc \ + g++-s390x-linux-gnu \ + gcc-s390x-linux-gnu \ + gdb-multiarch \ + git \ + make \ + python3 \ + qemu-system-misc \ + qemu-utils \ + rsync \ + libcap-dev:s390x \ + libelf-dev:s390x \ + libncurses-dev + +Latest Clang targeting BPF can be installed as follows:: + + git clone https://github.com/llvm/llvm-project.git + ln -s ../../clang llvm-project/llvm/tools/ + mkdir llvm-project-build + cd llvm-project-build + cmake \ + -DLLVM_TARGETS_TO_BUILD=BPF \ + -DCMAKE_BUILD_TYPE=Release \ + -DCMAKE_INSTALL_PREFIX=/opt/clang-bpf \ + ../llvm-project/llvm + make + sudo make install + export PATH=/opt/clang-bpf/bin:$PATH + +The disk image can be prepared using a loopback mount and debootstrap:: + + qemu-img create -f raw ./s390.img 1G + sudo losetup -f ./s390.img + sudo mkfs.ext4 /dev/loopX + mkdir ./s390.rootfs + sudo mount /dev/loopX ./s390.rootfs + sudo debootstrap \ + --foreign \ + --arch=s390x \ + --variant=minbase \ + --include=" \ + iproute2, \ + iputils-ping, \ + isc-dhcp-client, \ + kmod, \ + libcap2, \ + libelf1, \ + netcat, \ + procps" \ + testing \ + ./s390.rootfs + sudo umount ./s390.rootfs + sudo losetup -d /dev/loopX + +3. Compilation +************** + +In addition to the usual Kconfig options required to run the BPF test suite, it +is also helpful to select:: + + CONFIG_NET_9P=y + CONFIG_9P_FS=y + CONFIG_NET_9P_VIRTIO=y + CONFIG_VIRTIO_PCI=y + +as that would enable a very easy way to share files with the s390 virtual +machine. + +Compiling kernel, modules and testsuite, as well as preparing gdb scripts to +simplify debugging, can be done using the following commands:: + + make ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- menuconfig + make ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- bzImage modules scripts_gdb + make ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- \ + -C tools/testing/selftests \ + TARGETS=bpf \ + INSTALL_PATH=$PWD/tools/testing/selftests/kselftest_install \ + install + +4. Running the test suite +************************* + +The virtual machine can be started as follows:: + + qemu-system-s390x \ + -cpu max,zpci=on \ + -smp 2 \ + -m 4G \ + -kernel linux/arch/s390/boot/compressed/vmlinux \ + -drive file=./s390.img,if=virtio,format=raw \ + -nographic \ + -append 'root=/dev/vda rw console=ttyS1' \ + -virtfs local,path=./linux,security_model=none,mount_tag=linux \ + -object rng-random,filename=/dev/urandom,id=rng0 \ + -device virtio-rng-ccw,rng=rng0 \ + -netdev user,id=net0 \ + -device virtio-net-ccw,netdev=net0 + +When using this on a real IBM Z, ``-enable-kvm`` may be added for better +performance. When starting the virtual machine for the first time, disk image +setup must be finalized using the following command:: + + /debootstrap/debootstrap --second-stage + +Directory with the code built on the host as well as ``/proc`` and ``/sys`` +need to be mounted as follows:: + + mkdir -p /linux + mount -t 9p linux /linux + mount -t proc proc /proc + mount -t sysfs sys /sys + +After that, the test suite can be run using the following commands:: + + cd /linux/tools/testing/selftests/kselftest_install + ./run_kselftest.sh + +As usual, tests can be also run individually:: + + cd /linux/tools/testing/selftests/bpf + ./test_verifier + +5. Debugging +************ + +It is possible to debug the s390 kernel using QEMU GDB stub, which is activated +by passing ``-s`` to QEMU. + +It is preferable to turn KASLR off, so that gdb would know where to find the +kernel image in memory, by building the kernel with:: + + RANDOMIZE_BASE=n + +GDB can then be attached using the following command:: + + gdb-multiarch -ex 'target remote localhost:1234' ./vmlinux + +6. Network +********** + +In case one needs to use the network in the virtual machine in order to e.g. +install additional packages, it can be configured using:: + + dhclient eth0 + +7. Links +******** + +This document is a compilation of techniques, whose more comprehensive +descriptions can be found by following these links: + +- `Debootstrap <https://wiki.debian.org/EmDebian/CrossDebootstrap>`_ +- `Multiarch <https://wiki.debian.org/Multiarch/HOWTO>`_ +- `Building LLVM <https://llvm.org/docs/CMake.html>`_ +- `Cross-compiling the kernel <https://wiki.gentoo.org/wiki/Embedded_Handbook/General/Cross-compiling_the_kernel>`_ +- `QEMU s390x Guest Support <https://wiki.qemu.org/Documentation/Platforms/S390X>`_ +- `Plan 9 folder sharing over Virtio <https://wiki.qemu.org/Documentation/9psetup>`_ +- `Using GDB with QEMU <https://wiki.osdev.org/Kernel_Debugging#Use_GDB_with_QEMU>`_ diff --git a/Documentation/bpf/syscall_api.rst b/Documentation/bpf/syscall_api.rst new file mode 100644 index 000000000..f0a1dff08 --- /dev/null +++ b/Documentation/bpf/syscall_api.rst @@ -0,0 +1,11 @@ +=========== +Syscall API +=========== + +The primary info for the bpf syscall is available in the `man-pages`_ +for `bpf(2)`_. For more information about the userspace API, see +Documentation/userspace-api/ebpf/index.rst. + +.. Links: +.. _man-pages: https://www.kernel.org/doc/man-pages/ +.. _bpf(2): https://man7.org/linux/man-pages/man2/bpf.2.html
\ No newline at end of file diff --git a/Documentation/bpf/test_debug.rst b/Documentation/bpf/test_debug.rst new file mode 100644 index 000000000..ebf0caceb --- /dev/null +++ b/Documentation/bpf/test_debug.rst @@ -0,0 +1,9 @@ +========================= +Testing and debugging BPF +========================= + +.. toctree:: + :maxdepth: 1 + + drgn + s390 diff --git a/Documentation/bpf/verifier.rst b/Documentation/bpf/verifier.rst new file mode 100644 index 000000000..d4326caf0 --- /dev/null +++ b/Documentation/bpf/verifier.rst @@ -0,0 +1,529 @@ + +============= +eBPF verifier +============= + +The safety of the eBPF program is determined in two steps. + +First step does DAG check to disallow loops and other CFG validation. +In particular it will detect programs that have unreachable instructions. +(though classic BPF checker allows them) + +Second step starts from the first insn and descends all possible paths. +It simulates execution of every insn and observes the state change of +registers and stack. + +At the start of the program the register R1 contains a pointer to context +and has type PTR_TO_CTX. +If verifier sees an insn that does R2=R1, then R2 has now type +PTR_TO_CTX as well and can be used on the right hand side of expression. +If R1=PTR_TO_CTX and insn is R2=R1+R1, then R2=SCALAR_VALUE, +since addition of two valid pointers makes invalid pointer. +(In 'secure' mode verifier will reject any type of pointer arithmetic to make +sure that kernel addresses don't leak to unprivileged users) + +If register was never written to, it's not readable:: + + bpf_mov R0 = R2 + bpf_exit + +will be rejected, since R2 is unreadable at the start of the program. + +After kernel function call, R1-R5 are reset to unreadable and +R0 has a return type of the function. + +Since R6-R9 are callee saved, their state is preserved across the call. + +:: + + bpf_mov R6 = 1 + bpf_call foo + bpf_mov R0 = R6 + bpf_exit + +is a correct program. If there was R1 instead of R6, it would have +been rejected. + +load/store instructions are allowed only with registers of valid types, which +are PTR_TO_CTX, PTR_TO_MAP, PTR_TO_STACK. They are bounds and alignment checked. +For example:: + + bpf_mov R1 = 1 + bpf_mov R2 = 2 + bpf_xadd *(u32 *)(R1 + 3) += R2 + bpf_exit + +will be rejected, since R1 doesn't have a valid pointer type at the time of +execution of instruction bpf_xadd. + +At the start R1 type is PTR_TO_CTX (a pointer to generic ``struct bpf_context``) +A callback is used to customize verifier to restrict eBPF program access to only +certain fields within ctx structure with specified size and alignment. + +For example, the following insn:: + + bpf_ld R0 = *(u32 *)(R6 + 8) + +intends to load a word from address R6 + 8 and store it into R0 +If R6=PTR_TO_CTX, via is_valid_access() callback the verifier will know +that offset 8 of size 4 bytes can be accessed for reading, otherwise +the verifier will reject the program. +If R6=PTR_TO_STACK, then access should be aligned and be within +stack bounds, which are [-MAX_BPF_STACK, 0). In this example offset is 8, +so it will fail verification, since it's out of bounds. + +The verifier will allow eBPF program to read data from stack only after +it wrote into it. + +Classic BPF verifier does similar check with M[0-15] memory slots. +For example:: + + bpf_ld R0 = *(u32 *)(R10 - 4) + bpf_exit + +is invalid program. +Though R10 is correct read-only register and has type PTR_TO_STACK +and R10 - 4 is within stack bounds, there were no stores into that location. + +Pointer register spill/fill is tracked as well, since four (R6-R9) +callee saved registers may not be enough for some programs. + +Allowed function calls are customized with bpf_verifier_ops->get_func_proto() +The eBPF verifier will check that registers match argument constraints. +After the call register R0 will be set to return type of the function. + +Function calls is a main mechanism to extend functionality of eBPF programs. +Socket filters may let programs to call one set of functions, whereas tracing +filters may allow completely different set. + +If a function made accessible to eBPF program, it needs to be thought through +from safety point of view. The verifier will guarantee that the function is +called with valid arguments. + +seccomp vs socket filters have different security restrictions for classic BPF. +Seccomp solves this by two stage verifier: classic BPF verifier is followed +by seccomp verifier. In case of eBPF one configurable verifier is shared for +all use cases. + +See details of eBPF verifier in kernel/bpf/verifier.c + +Register value tracking +======================= + +In order to determine the safety of an eBPF program, the verifier must track +the range of possible values in each register and also in each stack slot. +This is done with ``struct bpf_reg_state``, defined in include/linux/ +bpf_verifier.h, which unifies tracking of scalar and pointer values. Each +register state has a type, which is either NOT_INIT (the register has not been +written to), SCALAR_VALUE (some value which is not usable as a pointer), or a +pointer type. The types of pointers describe their base, as follows: + + + PTR_TO_CTX + Pointer to bpf_context. + CONST_PTR_TO_MAP + Pointer to struct bpf_map. "Const" because arithmetic + on these pointers is forbidden. + PTR_TO_MAP_VALUE + Pointer to the value stored in a map element. + PTR_TO_MAP_VALUE_OR_NULL + Either a pointer to a map value, or NULL; map accesses + (see maps.rst) return this type, which becomes a + PTR_TO_MAP_VALUE when checked != NULL. Arithmetic on + these pointers is forbidden. + PTR_TO_STACK + Frame pointer. + PTR_TO_PACKET + skb->data. + PTR_TO_PACKET_END + skb->data + headlen; arithmetic forbidden. + PTR_TO_SOCKET + Pointer to struct bpf_sock_ops, implicitly refcounted. + PTR_TO_SOCKET_OR_NULL + Either a pointer to a socket, or NULL; socket lookup + returns this type, which becomes a PTR_TO_SOCKET when + checked != NULL. PTR_TO_SOCKET is reference-counted, + so programs must release the reference through the + socket release function before the end of the program. + Arithmetic on these pointers is forbidden. + +However, a pointer may be offset from this base (as a result of pointer +arithmetic), and this is tracked in two parts: the 'fixed offset' and 'variable +offset'. The former is used when an exactly-known value (e.g. an immediate +operand) is added to a pointer, while the latter is used for values which are +not exactly known. The variable offset is also used in SCALAR_VALUEs, to track +the range of possible values in the register. + +The verifier's knowledge about the variable offset consists of: + +* minimum and maximum values as unsigned +* minimum and maximum values as signed + +* knowledge of the values of individual bits, in the form of a 'tnum': a u64 + 'mask' and a u64 'value'. 1s in the mask represent bits whose value is unknown; + 1s in the value represent bits known to be 1. Bits known to be 0 have 0 in both + mask and value; no bit should ever be 1 in both. For example, if a byte is read + into a register from memory, the register's top 56 bits are known zero, while + the low 8 are unknown - which is represented as the tnum (0x0; 0xff). If we + then OR this with 0x40, we get (0x40; 0xbf), then if we add 1 we get (0x0; + 0x1ff), because of potential carries. + +Besides arithmetic, the register state can also be updated by conditional +branches. For instance, if a SCALAR_VALUE is compared > 8, in the 'true' branch +it will have a umin_value (unsigned minimum value) of 9, whereas in the 'false' +branch it will have a umax_value of 8. A signed compare (with BPF_JSGT or +BPF_JSGE) would instead update the signed minimum/maximum values. Information +from the signed and unsigned bounds can be combined; for instance if a value is +first tested < 8 and then tested s> 4, the verifier will conclude that the value +is also > 4 and s< 8, since the bounds prevent crossing the sign boundary. + +PTR_TO_PACKETs with a variable offset part have an 'id', which is common to all +pointers sharing that same variable offset. This is important for packet range +checks: after adding a variable to a packet pointer register A, if you then copy +it to another register B and then add a constant 4 to A, both registers will +share the same 'id' but the A will have a fixed offset of +4. Then if A is +bounds-checked and found to be less than a PTR_TO_PACKET_END, the register B is +now known to have a safe range of at least 4 bytes. See 'Direct packet access', +below, for more on PTR_TO_PACKET ranges. + +The 'id' field is also used on PTR_TO_MAP_VALUE_OR_NULL, common to all copies of +the pointer returned from a map lookup. This means that when one copy is +checked and found to be non-NULL, all copies can become PTR_TO_MAP_VALUEs. +As well as range-checking, the tracked information is also used for enforcing +alignment of pointer accesses. For instance, on most systems the packet pointer +is 2 bytes after a 4-byte alignment. If a program adds 14 bytes to that to jump +over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting +pointer will have a variable offset known to be 4n+2 for some n, so adding the 2 +bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through +that pointer are safe. +The 'id' field is also used on PTR_TO_SOCKET and PTR_TO_SOCKET_OR_NULL, common +to all copies of the pointer returned from a socket lookup. This has similar +behaviour to the handling for PTR_TO_MAP_VALUE_OR_NULL->PTR_TO_MAP_VALUE, but +it also handles reference tracking for the pointer. PTR_TO_SOCKET implicitly +represents a reference to the corresponding ``struct sock``. To ensure that the +reference is not leaked, it is imperative to NULL-check the reference and in +the non-NULL case, and pass the valid reference to the socket release function. + +Direct packet access +==================== + +In cls_bpf and act_bpf programs the verifier allows direct access to the packet +data via skb->data and skb->data_end pointers. +Ex:: + + 1: r4 = *(u32 *)(r1 +80) /* load skb->data_end */ + 2: r3 = *(u32 *)(r1 +76) /* load skb->data */ + 3: r5 = r3 + 4: r5 += 14 + 5: if r5 > r4 goto pc+16 + R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp + 6: r0 = *(u16 *)(r3 +12) /* access 12 and 13 bytes of the packet */ + +this 2byte load from the packet is safe to do, since the program author +did check ``if (skb->data + 14 > skb->data_end) goto err`` at insn #5 which +means that in the fall-through case the register R3 (which points to skb->data) +has at least 14 directly accessible bytes. The verifier marks it +as R3=pkt(id=0,off=0,r=14). +id=0 means that no additional variables were added to the register. +off=0 means that no additional constants were added. +r=14 is the range of safe access which means that bytes [R3, R3 + 14) are ok. +Note that R5 is marked as R5=pkt(id=0,off=14,r=14). It also points +to the packet data, but constant 14 was added to the register, so +it now points to ``skb->data + 14`` and accessible range is [R5, R5 + 14 - 14) +which is zero bytes. + +More complex packet access may look like:: + + + R0=inv1 R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp + 6: r0 = *(u8 *)(r3 +7) /* load 7th byte from the packet */ + 7: r4 = *(u8 *)(r3 +12) + 8: r4 *= 14 + 9: r3 = *(u32 *)(r1 +76) /* load skb->data */ + 10: r3 += r4 + 11: r2 = r1 + 12: r2 <<= 48 + 13: r2 >>= 48 + 14: r3 += r2 + 15: r2 = r3 + 16: r2 += 8 + 17: r1 = *(u32 *)(r1 +80) /* load skb->data_end */ + 18: if r2 > r1 goto pc+2 + R0=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=pkt_end R2=pkt(id=2,off=8,r=8) R3=pkt(id=2,off=0,r=8) R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)) R5=pkt(id=0,off=14,r=14) R10=fp + 19: r1 = *(u8 *)(r3 +4) + +The state of the register R3 is R3=pkt(id=2,off=0,r=8) +id=2 means that two ``r3 += rX`` instructions were seen, so r3 points to some +offset within a packet and since the program author did +``if (r3 + 8 > r1) goto err`` at insn #18, the safe range is [R3, R3 + 8). +The verifier only allows 'add'/'sub' operations on packet registers. Any other +operation will set the register state to 'SCALAR_VALUE' and it won't be +available for direct packet access. + +Operation ``r3 += rX`` may overflow and become less than original skb->data, +therefore the verifier has to prevent that. So when it sees ``r3 += rX`` +instruction and rX is more than 16-bit value, any subsequent bounds-check of r3 +against skb->data_end will not give us 'range' information, so attempts to read +through the pointer will give "invalid access to packet" error. + +Ex. after insn ``r4 = *(u8 *)(r3 +12)`` (insn #7 above) the state of r4 is +R4=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) which means that upper 56 bits +of the register are guaranteed to be zero, and nothing is known about the lower +8 bits. After insn ``r4 *= 14`` the state becomes +R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)), since multiplying an 8-bit +value by constant 14 will keep upper 52 bits as zero, also the least significant +bit will be zero as 14 is even. Similarly ``r2 >>= 48`` will make +R2=inv(id=0,umax_value=65535,var_off=(0x0; 0xffff)), since the shift is not sign +extending. This logic is implemented in adjust_reg_min_max_vals() function, +which calls adjust_ptr_min_max_vals() for adding pointer to scalar (or vice +versa) and adjust_scalar_min_max_vals() for operations on two scalars. + +The end result is that bpf program author can access packet directly +using normal C code as:: + + void *data = (void *)(long)skb->data; + void *data_end = (void *)(long)skb->data_end; + struct eth_hdr *eth = data; + struct iphdr *iph = data + sizeof(*eth); + struct udphdr *udp = data + sizeof(*eth) + sizeof(*iph); + + if (data + sizeof(*eth) + sizeof(*iph) + sizeof(*udp) > data_end) + return 0; + if (eth->h_proto != htons(ETH_P_IP)) + return 0; + if (iph->protocol != IPPROTO_UDP || iph->ihl != 5) + return 0; + if (udp->dest == 53 || udp->source == 9) + ...; + +which makes such programs easier to write comparing to LD_ABS insn +and significantly faster. + +Pruning +======= + +The verifier does not actually walk all possible paths through the program. For +each new branch to analyse, the verifier looks at all the states it's previously +been in when at this instruction. If any of them contain the current state as a +subset, the branch is 'pruned' - that is, the fact that the previous state was +accepted implies the current state would be as well. For instance, if in the +previous state, r1 held a packet-pointer, and in the current state, r1 holds a +packet-pointer with a range as long or longer and at least as strict an +alignment, then r1 is safe. Similarly, if r2 was NOT_INIT before then it can't +have been used by any path from that point, so any value in r2 (including +another NOT_INIT) is safe. The implementation is in the function regsafe(). +Pruning considers not only the registers but also the stack (and any spilled +registers it may hold). They must all be safe for the branch to be pruned. +This is implemented in states_equal(). + +Understanding eBPF verifier messages +==================================== + +The following are few examples of invalid eBPF programs and verifier error +messages as seen in the log: + +Program with unreachable instructions:: + + static struct bpf_insn prog[] = { + BPF_EXIT_INSN(), + BPF_EXIT_INSN(), + }; + +Error:: + + unreachable insn 1 + +Program that reads uninitialized register:: + + BPF_MOV64_REG(BPF_REG_0, BPF_REG_2), + BPF_EXIT_INSN(), + +Error:: + + 0: (bf) r0 = r2 + R2 !read_ok + +Program that doesn't initialize R0 before exiting:: + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_1), + BPF_EXIT_INSN(), + +Error:: + + 0: (bf) r2 = r1 + 1: (95) exit + R0 !read_ok + +Program that accesses stack out of bounds:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, 8, 0), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 +8) = 0 + invalid stack off=8 size=8 + +Program that doesn't initialize stack before passing its address into function:: + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_EXIT_INSN(), + +Error:: + + 0: (bf) r2 = r10 + 1: (07) r2 += -8 + 2: (b7) r1 = 0x0 + 3: (85) call 1 + invalid indirect read from stack off -8+0 size 8 + +Program that uses invalid map_fd=0 while calling to map_lookup_elem() function:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 0x0 + 4: (85) call 1 + fd 0 is not pointing to valid bpf_map + +Program that doesn't check return value of map_lookup_elem() before accessing +map element:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 0x0 + 4: (85) call 1 + 5: (7a) *(u64 *)(r0 +0) = 0 + R0 invalid mem access 'map_value_or_null' + +Program that correctly checks map_lookup_elem() returned value for NULL, but +accesses the memory with incorrect alignment:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 4, 0), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 1 + 4: (85) call 1 + 5: (15) if r0 == 0x0 goto pc+1 + R0=map_ptr R10=fp + 6: (7a) *(u64 *)(r0 +4) = 0 + misaligned access off 4 size 8 + +Program that correctly checks map_lookup_elem() returned value for NULL and +accesses memory with correct alignment in one side of 'if' branch, but fails +to do so in the other side of 'if' branch:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0), + BPF_EXIT_INSN(), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 1), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 1 + 4: (85) call 1 + 5: (15) if r0 == 0x0 goto pc+2 + R0=map_ptr R10=fp + 6: (7a) *(u64 *)(r0 +0) = 0 + 7: (95) exit + + from 5 to 8: R0=imm0 R10=fp + 8: (7a) *(u64 *)(r0 +0) = 1 + R0 invalid mem access 'imm' + +Program that performs a socket lookup then sets the pointer to NULL without +checking it:: + + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_MOV64_IMM(BPF_REG_3, 4), + BPF_MOV64_IMM(BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_5, 0), + BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + +Error:: + + 0: (b7) r2 = 0 + 1: (63) *(u32 *)(r10 -8) = r2 + 2: (bf) r2 = r10 + 3: (07) r2 += -8 + 4: (b7) r3 = 4 + 5: (b7) r4 = 0 + 6: (b7) r5 = 0 + 7: (85) call bpf_sk_lookup_tcp#65 + 8: (b7) r0 = 0 + 9: (95) exit + Unreleased reference id=1, alloc_insn=7 + +Program that performs a socket lookup but does not NULL-check the returned +value:: + + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_MOV64_IMM(BPF_REG_3, 4), + BPF_MOV64_IMM(BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_5, 0), + BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp), + BPF_EXIT_INSN(), + +Error:: + + 0: (b7) r2 = 0 + 1: (63) *(u32 *)(r10 -8) = r2 + 2: (bf) r2 = r10 + 3: (07) r2 += -8 + 4: (b7) r3 = 4 + 5: (b7) r4 = 0 + 6: (b7) r5 = 0 + 7: (85) call bpf_sk_lookup_tcp#65 + 8: (95) exit + Unreleased reference id=1, alloc_insn=7 |