summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/hwmon
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/hwmon')
-rw-r--r--Documentation/hwmon/abituguru-datasheet.rst336
-rw-r--r--Documentation/hwmon/abituguru.rst113
-rw-r--r--Documentation/hwmon/abituguru3.rst75
-rw-r--r--Documentation/hwmon/acpi_power_meter.rst54
-rw-r--r--Documentation/hwmon/ad7314.rst34
-rw-r--r--Documentation/hwmon/adc128d818.rst50
-rw-r--r--Documentation/hwmon/adm1021.rst153
-rw-r--r--Documentation/hwmon/adm1025.rst60
-rw-r--r--Documentation/hwmon/adm1026.rst101
-rw-r--r--Documentation/hwmon/adm1031.rst43
-rw-r--r--Documentation/hwmon/adm1177.rst36
-rw-r--r--Documentation/hwmon/adm1266.rst37
-rw-r--r--Documentation/hwmon/adm1275.rst148
-rw-r--r--Documentation/hwmon/adm9240.rst201
-rw-r--r--Documentation/hwmon/ads7828.rst65
-rw-r--r--Documentation/hwmon/adt7410.rst94
-rw-r--r--Documentation/hwmon/adt7411.rst50
-rw-r--r--Documentation/hwmon/adt7462.rst70
-rw-r--r--Documentation/hwmon/adt7470.rst94
-rw-r--r--Documentation/hwmon/adt7475.rst156
-rw-r--r--Documentation/hwmon/aht10.rst46
-rw-r--r--Documentation/hwmon/amc6821.rst108
-rw-r--r--Documentation/hwmon/aquacomputer_d5next.rst79
-rw-r--r--Documentation/hwmon/asb100.rst73
-rw-r--r--Documentation/hwmon/asc7621.rst326
-rw-r--r--Documentation/hwmon/aspeed-pwm-tacho.rst24
-rw-r--r--Documentation/hwmon/asus_ec_sensors.rst63
-rw-r--r--Documentation/hwmon/asus_wmi_sensors.rst78
-rw-r--r--Documentation/hwmon/bcm54140.rst45
-rw-r--r--Documentation/hwmon/bel-pfe.rst112
-rw-r--r--Documentation/hwmon/bpa-rs600.rst74
-rw-r--r--Documentation/hwmon/bt1-pvt.rst117
-rw-r--r--Documentation/hwmon/coretemp.rst195
-rw-r--r--Documentation/hwmon/corsair-cpro.rst41
-rw-r--r--Documentation/hwmon/corsair-psu.rst96
-rw-r--r--Documentation/hwmon/da9052.rst78
-rw-r--r--Documentation/hwmon/da9055.rst57
-rw-r--r--Documentation/hwmon/dell-smm-hwmon.rst359
-rw-r--r--Documentation/hwmon/dme1737.rst364
-rw-r--r--Documentation/hwmon/dps920ab.rst73
-rw-r--r--Documentation/hwmon/drivetemp.rst70
-rw-r--r--Documentation/hwmon/ds1621.rst217
-rw-r--r--Documentation/hwmon/ds620.rst38
-rw-r--r--Documentation/hwmon/emc1403.rst80
-rw-r--r--Documentation/hwmon/emc2103.rst37
-rw-r--r--Documentation/hwmon/emc2305.rst37
-rw-r--r--Documentation/hwmon/emc6w201.rst47
-rw-r--r--Documentation/hwmon/f71805f.rst181
-rw-r--r--Documentation/hwmon/f71882fg.rst192
-rw-r--r--Documentation/hwmon/fam15h_power.rst131
-rw-r--r--Documentation/hwmon/fsp-3y.rst28
-rw-r--r--Documentation/hwmon/ftsteutates.rst37
-rw-r--r--Documentation/hwmon/g760a.rst40
-rw-r--r--Documentation/hwmon/g762.rst74
-rw-r--r--Documentation/hwmon/gl518sm.rst80
-rw-r--r--Documentation/hwmon/gsc-hwmon.rst53
-rw-r--r--Documentation/hwmon/hih6130.rst45
-rw-r--r--Documentation/hwmon/hwmon-kernel-api.rst402
-rw-r--r--Documentation/hwmon/ibm-cffps.rst57
-rw-r--r--Documentation/hwmon/ibmaem.rst44
-rw-r--r--Documentation/hwmon/ibmpowernv.rst87
-rw-r--r--Documentation/hwmon/ina209.rst99
-rw-r--r--Documentation/hwmon/ina238.rst56
-rw-r--r--Documentation/hwmon/ina2xx.rst123
-rw-r--r--Documentation/hwmon/ina3221.rst74
-rw-r--r--Documentation/hwmon/index.rst238
-rw-r--r--Documentation/hwmon/inspur-ipsps1.rst79
-rw-r--r--Documentation/hwmon/intel-m10-bmc-hwmon.rst78
-rw-r--r--Documentation/hwmon/ir35221.rst92
-rw-r--r--Documentation/hwmon/ir36021.rst63
-rw-r--r--Documentation/hwmon/ir38064.rst90
-rw-r--r--Documentation/hwmon/isl68137.rst605
-rw-r--r--Documentation/hwmon/it87.rst348
-rw-r--r--Documentation/hwmon/jc42.rst152
-rw-r--r--Documentation/hwmon/k10temp.rst134
-rw-r--r--Documentation/hwmon/k8temp.rst62
-rw-r--r--Documentation/hwmon/lan966x.rst40
-rw-r--r--Documentation/hwmon/lineage-pem.rst85
-rw-r--r--Documentation/hwmon/lm25066.rst139
-rw-r--r--Documentation/hwmon/lm63.rst95
-rw-r--r--Documentation/hwmon/lm70.rst69
-rw-r--r--Documentation/hwmon/lm73.rst98
-rw-r--r--Documentation/hwmon/lm75.rst166
-rw-r--r--Documentation/hwmon/lm77.rst45
-rw-r--r--Documentation/hwmon/lm78.rst80
-rw-r--r--Documentation/hwmon/lm80.rst74
-rw-r--r--Documentation/hwmon/lm83.rst97
-rw-r--r--Documentation/hwmon/lm85.rst286
-rw-r--r--Documentation/hwmon/lm87.rst86
-rw-r--r--Documentation/hwmon/lm90.rst641
-rw-r--r--Documentation/hwmon/lm92.rst48
-rw-r--r--Documentation/hwmon/lm93.rst312
-rw-r--r--Documentation/hwmon/lm95234.rst48
-rw-r--r--Documentation/hwmon/lm95245.rst48
-rw-r--r--Documentation/hwmon/lochnagar.rst83
-rw-r--r--Documentation/hwmon/lt7182s.rst92
-rw-r--r--Documentation/hwmon/ltc2945.rst92
-rw-r--r--Documentation/hwmon/ltc2947.rst100
-rw-r--r--Documentation/hwmon/ltc2978.rst449
-rw-r--r--Documentation/hwmon/ltc2990.rst62
-rw-r--r--Documentation/hwmon/ltc2992.rst56
-rw-r--r--Documentation/hwmon/ltc3815.rst67
-rw-r--r--Documentation/hwmon/ltc4151.rst55
-rw-r--r--Documentation/hwmon/ltc4215.rst59
-rw-r--r--Documentation/hwmon/ltc4245.rst111
-rw-r--r--Documentation/hwmon/ltc4260.rst64
-rw-r--r--Documentation/hwmon/ltc4261.rst71
-rw-r--r--Documentation/hwmon/max127.rst45
-rw-r--r--Documentation/hwmon/max15301.rst87
-rw-r--r--Documentation/hwmon/max16064.rst75
-rw-r--r--Documentation/hwmon/max16065.rst127
-rw-r--r--Documentation/hwmon/max1619.rst33
-rw-r--r--Documentation/hwmon/max16601.rst136
-rw-r--r--Documentation/hwmon/max1668.rst70
-rw-r--r--Documentation/hwmon/max197.rst70
-rw-r--r--Documentation/hwmon/max20730.rst82
-rw-r--r--Documentation/hwmon/max20751.rst84
-rw-r--r--Documentation/hwmon/max31722.rst46
-rw-r--r--Documentation/hwmon/max31730.rst44
-rw-r--r--Documentation/hwmon/max31760.rst77
-rw-r--r--Documentation/hwmon/max31785.rst66
-rw-r--r--Documentation/hwmon/max31790.rst45
-rw-r--r--Documentation/hwmon/max34440.rst195
-rw-r--r--Documentation/hwmon/max6620.rst46
-rw-r--r--Documentation/hwmon/max6639.rst55
-rw-r--r--Documentation/hwmon/max6642.rst27
-rw-r--r--Documentation/hwmon/max6650.rst74
-rw-r--r--Documentation/hwmon/max6697.rst91
-rw-r--r--Documentation/hwmon/max8688.rst85
-rw-r--r--Documentation/hwmon/mc13783-adc.rst89
-rw-r--r--Documentation/hwmon/mcp3021.rst38
-rw-r--r--Documentation/hwmon/menf21bmc.rst55
-rw-r--r--Documentation/hwmon/mlxreg-fan.rst70
-rw-r--r--Documentation/hwmon/mp2888.rst113
-rw-r--r--Documentation/hwmon/mp2975.rst128
-rw-r--r--Documentation/hwmon/mp5023.rst84
-rw-r--r--Documentation/hwmon/nct6683.rst66
-rw-r--r--Documentation/hwmon/nct6775.rst280
-rw-r--r--Documentation/hwmon/nct7802.rst38
-rw-r--r--Documentation/hwmon/nct7904.rst67
-rw-r--r--Documentation/hwmon/npcm750-pwm-fan.rst26
-rw-r--r--Documentation/hwmon/nsa320.rst64
-rw-r--r--Documentation/hwmon/ntc_thermistor.rst111
-rw-r--r--Documentation/hwmon/nzxt-kraken2.rst42
-rw-r--r--Documentation/hwmon/nzxt-smart2.rst62
-rw-r--r--Documentation/hwmon/occ.rst153
-rw-r--r--Documentation/hwmon/pc87360.rst198
-rw-r--r--Documentation/hwmon/pc87427.rst63
-rw-r--r--Documentation/hwmon/pcf8591.rst98
-rw-r--r--Documentation/hwmon/peci-cputemp.rst90
-rw-r--r--Documentation/hwmon/peci-dimmtemp.rst57
-rw-r--r--Documentation/hwmon/pim4328.rst105
-rw-r--r--Documentation/hwmon/pli1209bc.rst75
-rw-r--r--Documentation/hwmon/pm6764tr.rst32
-rw-r--r--Documentation/hwmon/pmbus-core.rst360
-rw-r--r--Documentation/hwmon/pmbus.rst277
-rw-r--r--Documentation/hwmon/powr1220.rst53
-rw-r--r--Documentation/hwmon/pwm-fan.rst32
-rw-r--r--Documentation/hwmon/pxe1610.rst107
-rw-r--r--Documentation/hwmon/q54sj108a2.rst54
-rw-r--r--Documentation/hwmon/raspberrypi-hwmon.rst25
-rw-r--r--Documentation/hwmon/sbrmi.rst79
-rw-r--r--Documentation/hwmon/sbtsi_temp.rst42
-rw-r--r--Documentation/hwmon/sch5627.rst35
-rw-r--r--Documentation/hwmon/sch5636.rst37
-rw-r--r--Documentation/hwmon/scpi-hwmon.rst36
-rw-r--r--Documentation/hwmon/sht15.rst83
-rw-r--r--Documentation/hwmon/sht21.rst68
-rw-r--r--Documentation/hwmon/sht3x.rst88
-rw-r--r--Documentation/hwmon/sht4x.rst45
-rw-r--r--Documentation/hwmon/shtc1.rst67
-rw-r--r--Documentation/hwmon/sis5595.rst123
-rw-r--r--Documentation/hwmon/sl28cpld.rst36
-rw-r--r--Documentation/hwmon/smm665.rst187
-rw-r--r--Documentation/hwmon/smsc47b397.rst197
-rw-r--r--Documentation/hwmon/smsc47m1.rst86
-rw-r--r--Documentation/hwmon/smsc47m192.rst116
-rw-r--r--Documentation/hwmon/sparx5-temp.rst33
-rw-r--r--Documentation/hwmon/stpddc60.rst90
-rw-r--r--Documentation/hwmon/submitting-patches.rst149
-rw-r--r--Documentation/hwmon/sy7636a-hwmon.rst26
-rw-r--r--Documentation/hwmon/sysfs-interface.rst656
-rw-r--r--Documentation/hwmon/tc654.rst34
-rw-r--r--Documentation/hwmon/tc74.rst23
-rw-r--r--Documentation/hwmon/thmc50.rst89
-rw-r--r--Documentation/hwmon/tmp102.rst31
-rw-r--r--Documentation/hwmon/tmp103.rst33
-rw-r--r--Documentation/hwmon/tmp108.rst41
-rw-r--r--Documentation/hwmon/tmp401.rst80
-rw-r--r--Documentation/hwmon/tmp421.rst76
-rw-r--r--Documentation/hwmon/tmp464.rst73
-rw-r--r--Documentation/hwmon/tmp513.rst103
-rw-r--r--Documentation/hwmon/tps23861.rst41
-rw-r--r--Documentation/hwmon/tps40422.rst73
-rw-r--r--Documentation/hwmon/tps53679.rst187
-rw-r--r--Documentation/hwmon/tps546d24.rst35
-rw-r--r--Documentation/hwmon/twl4030-madc-hwmon.rst49
-rw-r--r--Documentation/hwmon/ucd9000.rst137
-rw-r--r--Documentation/hwmon/ucd9200.rst124
-rw-r--r--Documentation/hwmon/userspace-tools.rst43
-rw-r--r--Documentation/hwmon/vexpress.rst41
-rw-r--r--Documentation/hwmon/via686a.rst84
-rw-r--r--Documentation/hwmon/vt1211.rst226
-rw-r--r--Documentation/hwmon/w83627ehf.rst248
-rw-r--r--Documentation/hwmon/w83627hf.rst124
-rw-r--r--Documentation/hwmon/w83773g.rst35
-rw-r--r--Documentation/hwmon/w83781d.rst513
-rw-r--r--Documentation/hwmon/w83791d.rst180
-rw-r--r--Documentation/hwmon/w83792d.rst199
-rw-r--r--Documentation/hwmon/w83793.rst113
-rw-r--r--Documentation/hwmon/w83795.rst142
-rw-r--r--Documentation/hwmon/w83l785ts.rst45
-rw-r--r--Documentation/hwmon/w83l786ng.rst66
-rw-r--r--Documentation/hwmon/wm831x.rst40
-rw-r--r--Documentation/hwmon/wm8350.rst30
-rw-r--r--Documentation/hwmon/xdpe12284.rst106
-rw-r--r--Documentation/hwmon/xdpe152c4.rst118
-rw-r--r--Documentation/hwmon/xgene-hwmon.rst36
-rw-r--r--Documentation/hwmon/zl6100.rst259
219 files changed, 23394 insertions, 0 deletions
diff --git a/Documentation/hwmon/abituguru-datasheet.rst b/Documentation/hwmon/abituguru-datasheet.rst
new file mode 100644
index 000000000..0cd61471d
--- /dev/null
+++ b/Documentation/hwmon/abituguru-datasheet.rst
@@ -0,0 +1,336 @@
+===============
+uGuru datasheet
+===============
+
+First of all, what I know about uGuru is no fact based on any help, hints or
+datasheet from Abit. The data I have got on uGuru have I assembled through
+my weak knowledge in "backwards engineering".
+And just for the record, you may have noticed uGuru isn't a chip developed by
+Abit, as they claim it to be. It's really just an microprocessor (uC) created by
+Winbond (W83L950D). And no, reading the manual for this specific uC or
+mailing Windbond for help won't give any useful data about uGuru, as it is
+the program inside the uC that is responding to calls.
+
+Olle Sandberg <ollebull@gmail.com>, 2005-05-25
+
+
+Original version by Olle Sandberg who did the heavy lifting of the initial
+reverse engineering. This version has been almost fully rewritten for clarity
+and extended with write support and info on more databanks, the write support
+is once again reverse engineered by Olle the additional databanks have been
+reverse engineered by me. I would like to express my thanks to Olle, this
+document and the Linux driver could not have been written without his efforts.
+
+Note: because of the lack of specs only the sensors part of the uGuru is
+described here and not the CPU / RAM / etc voltage & frequency control.
+
+Hans de Goede <j.w.r.degoede@hhs.nl>, 28-01-2006
+
+
+Detection
+=========
+
+As far as known the uGuru is always placed at and using the (ISA) I/O-ports
+0xE0 and 0xE4, so we don't have to scan any port-range, just check what the two
+ports are holding for detection. We will refer to 0xE0 as CMD (command-port)
+and 0xE4 as DATA because Abit refers to them with these names.
+
+If DATA holds 0x00 or 0x08 and CMD holds 0x00 or 0xAC an uGuru could be
+present. We have to check for two different values at data-port, because
+after a reboot uGuru will hold 0x00 here, but if the driver is removed and
+later on attached again data-port will hold 0x08, more about this later.
+
+After wider testing of the Linux kernel driver some variants of the uGuru have
+turned up which will hold 0x00 instead of 0xAC at the CMD port, thus we also
+have to test CMD for two different values. On these uGuru's DATA will initially
+hold 0x09 and will only hold 0x08 after reading CMD first, so CMD must be read
+first!
+
+To be really sure an uGuru is present a test read of one or more register
+sets should be done.
+
+
+Reading / Writing
+=================
+
+Addressing
+----------
+
+The uGuru has a number of different addressing levels. The first addressing
+level we will call banks. A bank holds data for one or more sensors. The data
+in a bank for a sensor is one or more bytes large.
+
+The number of bytes is fixed for a given bank, you should always read or write
+that many bytes, reading / writing more will fail, the results when writing
+less then the number of bytes for a given bank are undetermined.
+
+See below for all known bank addresses, numbers of sensors in that bank,
+number of bytes data per sensor and contents/meaning of those bytes.
+
+Although both this document and the kernel driver have kept the sensor
+terminology for the addressing within a bank this is not 100% correct, in
+bank 0x24 for example the addressing within the bank selects a PWM output not
+a sensor.
+
+Notice that some banks have both a read and a write address this is how the
+uGuru determines if a read from or a write to the bank is taking place, thus
+when reading you should always use the read address and when writing the
+write address. The write address is always one (1) more than the read address.
+
+
+uGuru ready
+-----------
+
+Before you can read from or write to the uGuru you must first put the uGuru
+in "ready" mode.
+
+To put the uGuru in ready mode first write 0x00 to DATA and then wait for DATA
+to hold 0x09, DATA should read 0x09 within 250 read cycles.
+
+Next CMD _must_ be read and should hold 0xAC, usually CMD will hold 0xAC the
+first read but sometimes it takes a while before CMD holds 0xAC and thus it
+has to be read a number of times (max 50).
+
+After reading CMD, DATA should hold 0x08 which means that the uGuru is ready
+for input. As above DATA will usually hold 0x08 the first read but not always.
+This step can be skipped, but it is undetermined what happens if the uGuru has
+not yet reported 0x08 at DATA and you proceed with writing a bank address.
+
+
+Sending bank and sensor addresses to the uGuru
+----------------------------------------------
+
+First the uGuru must be in "ready" mode as described above, DATA should hold
+0x08 indicating that the uGuru wants input, in this case the bank address.
+
+Next write the bank address to DATA. After the bank address has been written
+wait for to DATA to hold 0x08 again indicating that it wants / is ready for
+more input (max 250 reads).
+
+Once DATA holds 0x08 again write the sensor address to CMD.
+
+
+Reading
+-------
+
+First send the bank and sensor addresses as described above.
+Then for each byte of data you want to read wait for DATA to hold 0x01
+which indicates that the uGuru is ready to be read (max 250 reads) and once
+DATA holds 0x01 read the byte from CMD.
+
+Once all bytes have been read data will hold 0x09, but there is no reason to
+test for this. Notice that the number of bytes is bank address dependent see
+above and below.
+
+After completing a successful read it is advised to put the uGuru back in
+ready mode, so that it is ready for the next read / write cycle. This way
+if your program / driver is unloaded and later loaded again the detection
+algorithm described above will still work.
+
+
+
+Writing
+-------
+
+First send the bank and sensor addresses as described above.
+Then for each byte of data you want to write wait for DATA to hold 0x00
+which indicates that the uGuru is ready to be written (max 250 reads) and
+once DATA holds 0x00 write the byte to CMD.
+
+Once all bytes have been written wait for DATA to hold 0x01 (max 250 reads)
+don't ask why this is the way it is.
+
+Once DATA holds 0x01 read CMD it should hold 0xAC now.
+
+After completing a successful write it is advised to put the uGuru back in
+ready mode, so that it is ready for the next read / write cycle. This way
+if your program / driver is unloaded and later loaded again the detection
+algorithm described above will still work.
+
+
+Gotchas
+-------
+
+After wider testing of the Linux kernel driver some variants of the uGuru have
+turned up which do not hold 0x08 at DATA within 250 reads after writing the
+bank address. With these versions this happens quite frequent, using larger
+timeouts doesn't help, they just go offline for a second or 2, doing some
+internal calibration or whatever. Your code should be prepared to handle
+this and in case of no response in this specific case just goto sleep for a
+while and then retry.
+
+
+Address Map
+===========
+
+Bank 0x20 Alarms (R)
+--------------------
+This bank contains 0 sensors, iow the sensor address is ignored (but must be
+written) just use 0. Bank 0x20 contains 3 bytes:
+
+Byte 0:
+ This byte holds the alarm flags for sensor 0-7 of Sensor Bank1, with bit 0
+ corresponding to sensor 0, 1 to 1, etc.
+
+Byte 1:
+ This byte holds the alarm flags for sensor 8-15 of Sensor Bank1, with bit 0
+ corresponding to sensor 8, 1 to 9, etc.
+
+Byte 2:
+ This byte holds the alarm flags for sensor 0-5 of Sensor Bank2, with bit 0
+ corresponding to sensor 0, 1 to 1, etc.
+
+
+Bank 0x21 Sensor Bank1 Values / Readings (R)
+--------------------------------------------
+This bank contains 16 sensors, for each sensor it contains 1 byte.
+So far the following sensors are known to be available on all motherboards:
+
+- Sensor 0 CPU temp
+- Sensor 1 SYS temp
+- Sensor 3 CPU core volt
+- Sensor 4 DDR volt
+- Sensor 10 DDR Vtt volt
+- Sensor 15 PWM temp
+
+Byte 0:
+ This byte holds the reading from the sensor. Sensors in Bank1 can be both
+ volt and temp sensors, this is motherboard specific. The uGuru however does
+ seem to know (be programmed with) what kindoff sensor is attached see Sensor
+ Bank1 Settings description.
+
+Volt sensors use a linear scale, a reading 0 corresponds with 0 volt and a
+reading of 255 with 3494 mV. The sensors for higher voltages however are
+connected through a division circuit. The currently known division circuits
+in use result in ranges of: 0-4361mV, 0-6248mV or 0-14510mV. 3.3 volt sources
+use the 0-4361mV range, 5 volt the 0-6248mV and 12 volt the 0-14510mV .
+
+Temp sensors also use a linear scale, a reading of 0 corresponds with 0 degree
+Celsius and a reading of 255 with a reading of 255 degrees Celsius.
+
+
+Bank 0x22 Sensor Bank1 Settings (R) and Bank 0x23 Sensor Bank1 Settings (W)
+---------------------------------------------------------------------------
+
+Those banks contain 16 sensors, for each sensor it contains 3 bytes. Each
+set of 3 bytes contains the settings for the sensor with the same sensor
+address in Bank 0x21 .
+
+Byte 0:
+ Alarm behaviour for the selected sensor. A 1 enables the described
+ behaviour.
+
+Bit 0:
+ Give an alarm if measured temp is over the warning threshold (RW) [1]_
+
+Bit 1:
+ Give an alarm if measured volt is over the max threshold (RW) [2]_
+
+Bit 2:
+ Give an alarm if measured volt is under the min threshold (RW) [2]_
+
+Bit 3:
+ Beep if alarm (RW)
+
+Bit 4:
+ 1 if alarm cause measured temp is over the warning threshold (R)
+
+Bit 5:
+ 1 if alarm cause measured volt is over the max threshold (R)
+
+Bit 6:
+ 1 if alarm cause measured volt is under the min threshold (R)
+
+Bit 7:
+ - Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW)
+ - Temp sensor: Shutdown if temp is over the shutdown threshold (RW)
+
+.. [1] This bit is only honored/used by the uGuru if a temp sensor is connected
+
+.. [2] This bit is only honored/used by the uGuru if a volt sensor is connected
+ Note with some trickery this can be used to find out what kinda sensor
+ is detected see the Linux kernel driver for an example with many
+ comments on how todo this.
+
+Byte 1:
+ - Temp sensor: warning threshold (scale as bank 0x21)
+ - Volt sensor: min threshold (scale as bank 0x21)
+
+Byte 2:
+ - Temp sensor: shutdown threshold (scale as bank 0x21)
+ - Volt sensor: max threshold (scale as bank 0x21)
+
+
+Bank 0x24 PWM outputs for FAN's (R) and Bank 0x25 PWM outputs for FAN's (W)
+---------------------------------------------------------------------------
+
+Those banks contain 3 "sensors", for each sensor it contains 5 bytes.
+ - Sensor 0 usually controls the CPU fan
+ - Sensor 1 usually controls the NB (or chipset for single chip) fan
+ - Sensor 2 usually controls the System fan
+
+Byte 0:
+ Flag 0x80 to enable control, Fan runs at 100% when disabled.
+ low nibble (temp)sensor address at bank 0x21 used for control.
+
+Byte 1:
+ 0-255 = 0-12v (linear), specify voltage at which fan will rotate when under
+ low threshold temp (specified in byte 3)
+
+Byte 2:
+ 0-255 = 0-12v (linear), specify voltage at which fan will rotate when above
+ high threshold temp (specified in byte 4)
+
+Byte 3:
+ Low threshold temp (scale as bank 0x21)
+
+byte 4:
+ High threshold temp (scale as bank 0x21)
+
+
+Bank 0x26 Sensors Bank2 Values / Readings (R)
+---------------------------------------------
+
+This bank contains 6 sensors (AFAIK), for each sensor it contains 1 byte.
+
+So far the following sensors are known to be available on all motherboards:
+ - Sensor 0: CPU fan speed
+ - Sensor 1: NB (or chipset for single chip) fan speed
+ - Sensor 2: SYS fan speed
+
+Byte 0:
+ This byte holds the reading from the sensor. 0-255 = 0-15300 (linear)
+
+
+Bank 0x27 Sensors Bank2 Settings (R) and Bank 0x28 Sensors Bank2 Settings (W)
+-----------------------------------------------------------------------------
+
+Those banks contain 6 sensors (AFAIK), for each sensor it contains 2 bytes.
+
+Byte 0:
+ Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
+
+Bit 0:
+ Give an alarm if measured rpm is under the min threshold (RW)
+
+Bit 3:
+ Beep if alarm (RW)
+
+Bit 7:
+ Shutdown if alarm persist for more than 4 seconds (RW)
+
+Byte 1:
+ min threshold (scale as bank 0x26)
+
+
+Warning for the adventurous
+===========================
+
+A word of caution to those who want to experiment and see if they can figure
+the voltage / clock programming out, I tried reading and only reading banks
+0-0x30 with the reading code used for the sensor banks (0x20-0x28) and this
+resulted in a _permanent_ reprogramming of the voltages, luckily I had the
+sensors part configured so that it would shutdown my system on any out of spec
+voltages which probably safed my computer (after a reboot I managed to
+immediately enter the bios and reload the defaults). This probably means that
+the read/write cycle for the non sensor part is different from the sensor part.
diff --git a/Documentation/hwmon/abituguru.rst b/Documentation/hwmon/abituguru.rst
new file mode 100644
index 000000000..cfda60b75
--- /dev/null
+++ b/Documentation/hwmon/abituguru.rst
@@ -0,0 +1,113 @@
+Kernel driver abituguru
+=======================
+
+Supported chips:
+
+ * Abit uGuru revision 1 & 2 (Hardware Monitor part only)
+
+ Prefix: 'abituguru'
+
+ Addresses scanned: ISA 0x0E0
+
+ Datasheet: Not available, this driver is based on reverse engineering.
+ A "Datasheet" has been written based on the reverse engineering it
+ should be available in the same dir as this file under the name
+ abituguru-datasheet.
+
+ Note:
+ The uGuru is a microcontroller with onboard firmware which programs
+ it to behave as a hwmon IC. There are many different revisions of the
+ firmware and thus effectively many different revisions of the uGuru.
+ Below is an incomplete list with which revisions are used for which
+ Motherboards:
+
+ - uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) [1]_
+ - uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+ - uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+ - uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+ - uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+ - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
+ AW9D-MAX) [2]_
+
+.. [1] For revisions 2 and 3 uGuru's the driver can autodetect the
+ sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+ this does not always work. For these uGuru's the autodetection can
+ be overridden with the bank1_types module param. For all 3 known
+ revision 1 motherboards the correct use of this param is:
+ bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+ You may also need to specify the fan_sensors option for these boards
+ fan_sensors=5
+
+.. [2] There is a separate abituguru3 driver for these motherboards,
+ the abituguru (without the 3 !) driver will not work on these
+ motherboards (and visa versa)!
+
+Authors:
+ - Hans de Goede <j.w.r.degoede@hhs.nl>,
+ - (Initial reverse engineering done by Olle Sandberg
+ <ollebull@gmail.com>)
+
+
+Module Parameters
+-----------------
+
+* force: bool
+ Force detection. Note this parameter only causes the
+ detection to be skipped, and thus the insmod to
+ succeed. If the uGuru can't be read the actual hwmon
+ driver will not load and thus no hwmon device will get
+ registered.
+* bank1_types: int[]
+ Bank1 sensortype autodetection override:
+
+ * -1 autodetect (default)
+ * 0 volt sensor
+ * 1 temp sensor
+ * 2 not connected
+* fan_sensors: int
+ Tell the driver how many fan speed sensors there are
+ on your motherboard. Default: 0 (autodetect).
+* pwms: int
+ Tell the driver how many fan speed controls (fan
+ pwms) your motherboard has. Default: 0 (autodetect).
+* verbose: int
+ How verbose should the driver be? (0-3):
+
+ * 0 normal output
+ * 1 + verbose error reporting
+ * 2 + sensors type probing info (default)
+ * 3 + retryable error reporting
+
+ Default: 2 (the driver is still in the testing phase)
+
+Notice: if you need any of the first three options above please insmod the
+driver with verbose set to 3 and mail me <j.w.r.degoede@hhs.nl> the output of:
+dmesg | grep abituguru
+
+
+Description
+-----------
+
+This driver supports the hardware monitoring features of the first and
+second revision of the Abit uGuru chip found on Abit uGuru featuring
+motherboards (most modern Abit motherboards).
+
+The first and second revision of the uGuru chip in reality is a Winbond
+W83L950D in disguise (despite Abit claiming it is "a new microprocessor
+designed by the ABIT Engineers"). Unfortunately this doesn't help since the
+W83L950D is a generic microcontroller with a custom Abit application running
+on it.
+
+Despite Abit not releasing any information regarding the uGuru, Olle
+Sandberg <ollebull@gmail.com> has managed to reverse engineer the sensor part
+of the uGuru. Without his work this driver would not have been possible.
+
+Known Issues
+------------
+
+The voltage and frequency control parts of the Abit uGuru are not supported.
+
+.. toctree::
+ :maxdepth: 1
+
+ abituguru-datasheet.rst
diff --git a/Documentation/hwmon/abituguru3.rst b/Documentation/hwmon/abituguru3.rst
new file mode 100644
index 000000000..88046d866
--- /dev/null
+++ b/Documentation/hwmon/abituguru3.rst
@@ -0,0 +1,75 @@
+Kernel driver abituguru3
+========================
+
+Supported chips:
+ * Abit uGuru revision 3 (Hardware Monitor part, reading only)
+
+ Prefix: 'abituguru3'
+
+ Addresses scanned: ISA 0x0E0
+
+ Datasheet: Not available, this driver is based on reverse engineering.
+
+ Note:
+ The uGuru is a microcontroller with onboard firmware which programs
+ it to behave as a hwmon IC. There are many different revisions of the
+ firmware and thus effectively many different revisions of the uGuru.
+ Below is an incomplete list with which revisions are used for which
+ Motherboards:
+
+ - uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7)
+ - uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+ - uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+ - uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+ - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
+ AW9D-MAX)
+
+ The abituguru3 driver is only for revision 3.0.x.x motherboards,
+ this driver will not work on older motherboards. For older
+ motherboards use the abituguru (without the 3 !) driver.
+
+Authors:
+ - Hans de Goede <j.w.r.degoede@hhs.nl>,
+ - (Initial reverse engineering done by Louis Kruger)
+
+
+Module Parameters
+-----------------
+
+* force: bool
+ Force detection. Note this parameter only causes the
+ detection to be skipped, and thus the insmod to
+ succeed. If the uGuru can't be read the actual hwmon
+ driver will not load and thus no hwmon device will get
+ registered.
+* verbose: bool
+ Should the driver be verbose?
+
+ * 0/off/false normal output
+ * 1/on/true + verbose error reporting (default)
+
+ Default: 1 (the driver is still in the testing phase)
+
+Description
+-----------
+
+This driver supports the hardware monitoring features of the third revision of
+the Abit uGuru chip, found on recent Abit uGuru featuring motherboards.
+
+The 3rd revision of the uGuru chip in reality is a Winbond W83L951G.
+Unfortunately this doesn't help since the W83L951G is a generic microcontroller
+with a custom Abit application running on it.
+
+Despite Abit not releasing any information regarding the uGuru revision 3,
+Louis Kruger has managed to reverse engineer the sensor part of the uGuru.
+Without his work this driver would not have been possible.
+
+Known Issues
+------------
+
+The voltage and frequency control parts of the Abit uGuru are not supported,
+neither is writing any of the sensor settings and writing / reading the
+fanspeed control registers (FanEQ)
+
+If you encounter any problems please mail me <j.w.r.degoede@hhs.nl> and
+include the output of: `dmesg | grep abituguru`
diff --git a/Documentation/hwmon/acpi_power_meter.rst b/Documentation/hwmon/acpi_power_meter.rst
new file mode 100644
index 000000000..8628c1161
--- /dev/null
+++ b/Documentation/hwmon/acpi_power_meter.rst
@@ -0,0 +1,54 @@
+Kernel driver power_meter
+=========================
+
+This driver talks to ACPI 4.0 power meters.
+
+Supported systems:
+
+ * Any recent system with ACPI 4.0.
+
+ Prefix: 'power_meter'
+
+ Datasheet: https://uefi.org/specifications, section 10.4.
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements sensor reading support for the power meters exposed in
+the ACPI 4.0 spec (Chapter 10.4). These devices have a simple set of
+features--a power meter that returns average power use over a configurable
+interval, an optional capping mechanism, and a couple of trip points. The
+sysfs interface conforms with the specification outlined in the "Power" section
+of Documentation/hwmon/sysfs-interface.rst.
+
+Special Features
+----------------
+
+The `power[1-*]_is_battery` knob indicates if the power supply is a battery.
+Both `power[1-*]_average_{min,max}` must be set before the trip points will work.
+When both of them are set, an ACPI event will be broadcast on the ACPI netlink
+socket and a poll notification will be sent to the appropriate
+`power[1-*]_average` sysfs file.
+
+The `power[1-*]_{model_number, serial_number, oem_info}` fields display
+arbitrary strings that ACPI provides with the meter. The measures/ directory
+contains symlinks to the devices that this meter measures.
+
+Some computers have the ability to enforce a power cap in hardware. If this is
+the case, the `power[1-*]_cap` and related sysfs files will appear. When the
+average power consumption exceeds the cap, an ACPI event will be broadcast on
+the netlink event socket and a poll notification will be sent to the
+appropriate `power[1-*]_alarm` file to indicate that capping has begun, and the
+hardware has taken action to reduce power consumption. Most likely this will
+result in reduced performance.
+
+There are a few other ACPI notifications that can be sent by the firmware. In
+all cases the ACPI event will be broadcast on the ACPI netlink event socket as
+well as sent as a poll notification to a sysfs file. The events are as
+follows:
+
+`power[1-*]_cap` will be notified if the firmware changes the power cap.
+`power[1-*]_interval` will be notified if the firmware changes the averaging
+interval.
diff --git a/Documentation/hwmon/ad7314.rst b/Documentation/hwmon/ad7314.rst
new file mode 100644
index 000000000..bf389736b
--- /dev/null
+++ b/Documentation/hwmon/ad7314.rst
@@ -0,0 +1,34 @@
+Kernel driver ad7314
+====================
+
+Supported chips:
+
+ * Analog Devices AD7314
+
+ Prefix: 'ad7314'
+
+ Datasheet: Publicly available at Analog Devices website.
+
+ * Analog Devices ADT7301
+
+ Prefix: 'adt7301'
+
+ Datasheet: Publicly available at Analog Devices website.
+
+ * Analog Devices ADT7302
+
+ Prefix: 'adt7302'
+
+ Datasheet: Publicly available at Analog Devices website.
+
+Description
+-----------
+
+Driver supports the above parts. The ad7314 has a 10 bit
+sensor with 1lsb = 0.25 degrees centigrade. The adt7301 and
+adt7302 have 14 bit sensors with 1lsb = 0.03125 degrees centigrade.
+
+Notes
+-----
+
+Currently power down mode is not supported.
diff --git a/Documentation/hwmon/adc128d818.rst b/Documentation/hwmon/adc128d818.rst
new file mode 100644
index 000000000..d24880234
--- /dev/null
+++ b/Documentation/hwmon/adc128d818.rst
@@ -0,0 +1,50 @@
+Kernel driver adc128d818
+========================
+
+Supported chips:
+
+ * Texas Instruments ADC818D818
+
+ Prefix: 'adc818d818'
+
+ Addresses scanned: I2C 0x1d, 0x1e, 0x1f, 0x2d, 0x2e, 0x2f
+
+ Datasheet: Publicly available at the TI website https://www.ti.com/
+
+Author: Guenter Roeck
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments ADC128D818.
+It is described as 'ADC System Monitor with Temperature Sensor'.
+
+The ADC128D818 implements one temperature sensor and seven voltage sensors.
+
+Temperatures are measured in degrees Celsius. There is one set of limits.
+When the HOT Temperature Limit is crossed, this will cause an alarm that will
+be reasserted until the temperature drops below the HOT Hysteresis.
+Measurements are guaranteed between -55 and +125 degrees. The temperature
+measurement has a resolution of 0.5 degrees; the limits have a resolution
+of 1 degree.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 2.55 volts, with a resolution
+of 0.625 mV.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared by the time the alarm is read. The driver
+caches the alarm status for each sensor until it is at least reported
+once, to ensure that alarms are reported to user space.
+
+The ADC128D818 only updates its values approximately once per second;
+reading it more often will do no harm, but will return 'old' values.
+
+In addition to the scanned address list, the chip can also be configured for
+addresses 0x35 to 0x37. Those addresses are not scanned. You have to instantiate
+the driver explicitly if the chip is configured for any of those addresses in
+your system.
diff --git a/Documentation/hwmon/adm1021.rst b/Documentation/hwmon/adm1021.rst
new file mode 100644
index 000000000..116fb2019
--- /dev/null
+++ b/Documentation/hwmon/adm1021.rst
@@ -0,0 +1,153 @@
+Kernel driver adm1021
+=====================
+
+Supported chips:
+
+ * Analog Devices ADM1021
+
+ Prefix: 'adm1021'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ * Analog Devices ADM1021A/ADM1023
+
+ Prefix: 'adm1023'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ * Genesys Logic GL523SM
+
+ Prefix: 'gl523sm'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet:
+
+ * Maxim MAX1617
+
+ Prefix: 'max1617'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ * Maxim MAX1617A
+
+ Prefix: 'max1617a'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ * National Semiconductor LM84
+
+ Prefix: 'lm84'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ * Philips NE1617
+
+ Prefix: 'max1617' (probably detected as a max1617)
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Philips website
+
+ * Philips NE1617A
+
+ Prefix: 'max1617' (probably detected as a max1617)
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Philips website
+
+ * TI THMC10
+
+ Prefix: 'thmc10'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the TI website
+
+ * Onsemi MC1066
+
+ Prefix: 'mc1066'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Onsemi website
+
+
+Authors:
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Philip Edelbrock <phil@netroedge.com>
+
+Module Parameters
+-----------------
+
+* read_only: int
+ Don't set any values, read only mode
+
+
+Description
+-----------
+
+The chips supported by this driver are very similar. The Maxim MAX1617 is
+the oldest; it has the problem that it is not very well detectable. The
+MAX1617A solves that. The ADM1021 is a straight clone of the MAX1617A.
+Ditto for the THMC10. From here on, we will refer to all these chips as
+ADM1021-clones.
+
+The ADM1021 and MAX1617A reports a die code, which is a sort of revision
+code. This can help us pinpoint problems; it is not very useful
+otherwise.
+
+ADM1021-clones implement two temperature sensors. One of them is internal,
+and measures the temperature of the chip itself; the other is external and
+is realised in the form of a transistor-like device. A special alarm
+indicates whether the remote sensor is connected.
+
+Each sensor has its own low and high limits. When they are crossed, the
+corresponding alarm is set and remains on as long as the temperature stays
+out of range. Temperatures are measured in degrees Celsius. Measurements
+are possible between -65 and +127 degrees, with a resolution of one degree.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared!
+
+This driver only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values. It is possible to make
+ADM1021-clones do faster measurements, but there is really no good reason
+for that.
+
+
+Netburst-based Xeon support
+---------------------------
+
+Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to
+2003) microarchitecture had real MAX1617, ADM1021, or compatible chips
+within them, with two temperature sensors. Other Xeon processors of this
+era (with 400 MHz FSB) had chips with only one temperature sensor.
+
+If you have such an old Xeon, and you get two valid temperatures when
+loading the adm1021 module, then things are good.
+
+If nothing happens when loading the adm1021 module, and you are certain
+that your specific Xeon processor model includes compatible sensors, you
+will have to explicitly instantiate the sensor chips from user-space. See
+method 4 in Documentation/i2c/instantiating-devices.rst. Possible slave
+addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that
+only temp2 will be correct and temp1 will have to be ignored.
+
+Previous generations of the Xeon processor (based on Pentium II/III)
+didn't have these sensors. Next generations of Xeon processors (533 MHz
+FSB and faster) lost them, until the Core-based generation which
+introduced integrated digital thermal sensors. These are supported by
+the coretemp driver.
diff --git a/Documentation/hwmon/adm1025.rst b/Documentation/hwmon/adm1025.rst
new file mode 100644
index 000000000..283e65e34
--- /dev/null
+++ b/Documentation/hwmon/adm1025.rst
@@ -0,0 +1,60 @@
+Kernel driver adm1025
+=====================
+
+Supported chips:
+
+ * Analog Devices ADM1025, ADM1025A
+
+ Prefix: 'adm1025'
+
+ Addresses scanned: I2C 0x2c - 0x2e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ * Philips NE1619
+
+ Prefix: 'ne1619'
+
+ Addresses scanned: I2C 0x2c - 0x2d
+
+ Datasheet: Publicly available at the Philips website
+
+The NE1619 presents some differences with the original ADM1025:
+
+ * Only two possible addresses (0x2c - 0x2d).
+ * No temperature offset register, but we don't use it anyway.
+ * No INT mode for pin 16. We don't play with it anyway.
+
+Authors:
+ - Chen-Yuan Wu <gwu@esoft.com>,
+ - Jean Delvare <jdelvare@suse.de>
+
+Description
+-----------
+
+(This is from Analog Devices.) The ADM1025 is a complete system hardware
+monitor for microprocessor-based systems, providing measurement and limit
+comparison of various system parameters. Five voltage measurement inputs
+are provided, for monitoring +2.5V, +3.3V, +5V and +12V power supplies and
+the processor core voltage. The ADM1025 can monitor a sixth power-supply
+voltage by measuring its own VCC. One input (two pins) is dedicated to a
+remote temperature-sensing diode and an on-chip temperature sensor allows
+ambient temperature to be monitored.
+
+One specificity of this chip is that the pin 11 can be hardwired in two
+different manners. It can act as the +12V power-supply voltage analog
+input, or as the a fifth digital entry for the VID reading (bit 4). It's
+kind of strange since both are useful, and the reason for designing the
+chip that way is obscure at least to me. The bit 5 of the configuration
+register can be used to define how the chip is hardwired. Please note that
+it is not a choice you have to make as the user. The choice was already
+made by your motherboard's maker. If the configuration bit isn't set
+properly, you'll have a wrong +12V reading or a wrong VID reading. The way
+the driver handles that is to preserve this bit through the initialization
+process, assuming that the BIOS set it up properly beforehand. If it turns
+out not to be true in some cases, we'll provide a module parameter to force
+modes.
+
+This driver also supports the ADM1025A, which differs from the ADM1025
+only in that it has "open-drain VID inputs while the ADM1025 has on-chip
+100k pull-ups on the VID inputs". It doesn't make any difference for us.
diff --git a/Documentation/hwmon/adm1026.rst b/Documentation/hwmon/adm1026.rst
new file mode 100644
index 000000000..66f996fa3
--- /dev/null
+++ b/Documentation/hwmon/adm1026.rst
@@ -0,0 +1,101 @@
+Kernel driver adm1026
+=====================
+
+Supported chips:
+ * Analog Devices ADM1026
+
+ Prefix: 'adm1026'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADM1026
+
+Authors:
+ - Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing
+ - Justin Thiessen <jthiessen@penguincomputing.com>
+
+Module Parameters
+-----------------
+
+* gpio_input: int array (min = 1, max = 17)
+ List of GPIO pins (0-16) to program as inputs
+
+* gpio_output: int array (min = 1, max = 17)
+ List of GPIO pins (0-16) to program as outputs
+
+* gpio_inverted: int array (min = 1, max = 17)
+ List of GPIO pins (0-16) to program as inverted
+
+* gpio_normal: int array (min = 1, max = 17)
+ List of GPIO pins (0-16) to program as normal/non-inverted
+
+* gpio_fan: int array (min = 1, max = 8)
+ List of GPIO pins (0-7) to program as fan tachs
+
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADM1026. Analog
+Devices calls it a "complete thermal system management controller."
+
+The ADM1026 implements three (3) temperature sensors, 17 voltage sensors,
+16 general purpose digital I/O lines, eight (8) fan speed sensors (8-bit),
+an analog output and a PWM output along with limit, alarm and mask bits for
+all of the above. There is even 8k bytes of EEPROM memory on chip.
+
+Temperatures are measured in degrees Celsius. There are two external
+sensor inputs and one internal sensor. Each sensor has a high and low
+limit. If the limit is exceeded, an interrupt (#SMBALERT) can be
+generated. The interrupts can be masked. In addition, there are over-temp
+limits for each sensor. If this limit is exceeded, the #THERM output will
+be asserted. The current temperature and limits have a resolution of 1
+degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute) but measured
+in counts of a 22.5kHz internal clock. Each fan has a high limit which
+corresponds to a minimum fan speed. If the limit is exceeded, an interrupt
+can be generated. Each fan can be programmed to divide the reference clock
+by 1, 2, 4 or 8. Not all RPM values can accurately be represented, so some
+rounding is done. With a divider of 8, the slowest measurable speed of a
+two pulse per revolution fan is 661 RPM.
+
+There are 17 voltage sensors. An alarm is triggered if the voltage has
+crossed a programmable minimum or maximum limit. Note that minimum in this
+case always means 'closest to zero'; this is important for negative voltage
+measurements. Several inputs have integrated attenuators so they can measure
+higher voltages directly. 3.3V, 5V, 12V, -12V and battery voltage all have
+dedicated inputs. There are several inputs scaled to 0-3V full-scale range
+for SCSI terminator power. The remaining inputs are not scaled and have
+a 0-2.5V full-scale range. A 2.5V or 1.82V reference voltage is provided
+for negative voltage measurements.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared! Note that in the current implementation, all hardware
+registers are read whenever any data is read (unless it is less than 2.0
+seconds since the last update). This means that you can easily miss
+once-only alarms.
+
+The ADM1026 measures continuously. Analog inputs are measured about 4
+times a second. Fan speed measurement time depends on fan speed and
+divisor. It can take as long as 1.5 seconds to measure all fan speeds.
+
+The ADM1026 has the ability to automatically control fan speed based on the
+temperature sensor inputs. Both the PWM output and the DAC output can be
+used to control fan speed. Usually only one of these two outputs will be
+used. Write the minimum PWM or DAC value to the appropriate control
+register. Then set the low temperature limit in the tmin values for each
+temperature sensor. The range of control is fixed at 20 °C, and the
+largest difference between current and tmin of the temperature sensors sets
+the control output. See the datasheet for several example circuits for
+controlling fan speed with the PWM and DAC outputs. The fan speed sensors
+do not have PWM compensation, so it is probably best to control the fan
+voltage from the power lead rather than on the ground lead.
+
+The datasheet shows an example application with VID signals attached to
+GPIO lines. Unfortunately, the chip may not be connected to the VID lines
+in this way. The driver assumes that the chips *is* connected this way to
+get a VID voltage.
diff --git a/Documentation/hwmon/adm1031.rst b/Documentation/hwmon/adm1031.rst
new file mode 100644
index 000000000..be74ec1f3
--- /dev/null
+++ b/Documentation/hwmon/adm1031.rst
@@ -0,0 +1,43 @@
+Kernel driver adm1031
+=====================
+
+Supported chips:
+ * Analog Devices ADM1030
+
+ Prefix: 'adm1030'
+
+ Addresses scanned: I2C 0x2c to 0x2e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ https://www.analog.com/en/prod/0%2C2877%2CADM1030%2C00.html
+
+ * Analog Devices ADM1031
+
+ Prefix: 'adm1031'
+
+ Addresses scanned: I2C 0x2c to 0x2e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ https://www.analog.com/en/prod/0%2C2877%2CADM1031%2C00.html
+
+Authors:
+ - Alexandre d'Alton <alex@alexdalton.org>
+ - Jean Delvare <jdelvare@suse.de>
+
+Description
+-----------
+
+The ADM1030 and ADM1031 are digital temperature sensors and fan controllers.
+They sense their own temperature as well as the temperature of up to one
+(ADM1030) or two (ADM1031) external diodes.
+
+All temperature values are given in degrees Celsius. Resolution is 0.5
+degree for the local temperature, 0.125 degree for the remote temperatures.
+
+Each temperature channel has its own high and low limits, plus a critical
+limit.
+
+The ADM1030 monitors a single fan speed, while the ADM1031 monitors up to
+two. Each fan channel has its own low speed limit.
diff --git a/Documentation/hwmon/adm1177.rst b/Documentation/hwmon/adm1177.rst
new file mode 100644
index 000000000..1c85a2af9
--- /dev/null
+++ b/Documentation/hwmon/adm1177.rst
@@ -0,0 +1,36 @@
+Kernel driver adm1177
+=====================
+
+Supported chips:
+ * Analog Devices ADM1177
+ Prefix: 'adm1177'
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
+
+Author: Beniamin Bia <beniamin.bia@analog.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices ADM1177
+Hot-Swap Controller and Digital Power Monitors with Soft Start Pin.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst
+for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Current maxim attribute
+is read-write, all other attributes are read-only.
+
+in0_input Measured voltage in microvolts.
+
+curr1_input Measured current in microamperes.
+curr1_max_alarm Overcurrent alarm in microamperes.
diff --git a/Documentation/hwmon/adm1266.rst b/Documentation/hwmon/adm1266.rst
new file mode 100644
index 000000000..2b877011c
--- /dev/null
+++ b/Documentation/hwmon/adm1266.rst
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver adm1266
+=====================
+
+Supported chips:
+ * Analog Devices ADM1266
+ Prefix: 'adm1266'
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+Author: Alexandru Tachici <alexandru.tachici@analog.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices ADM1266 sequencer.
+
+ADM1266 is a sequencer that features voltage readback from 17 channels via an
+integrated 12 bit SAR ADC, accessed using a PMBus interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write, history reset
+attributes are write-only, all other attributes are read-only.
+
+inX_label "voutx"
+inX_input Measured voltage.
+inX_min Minimum Voltage.
+inX_max Maximum voltage.
+inX_min_alarm Voltage low alarm.
+inX_max_alarm Voltage high alarm.
diff --git a/Documentation/hwmon/adm1275.rst b/Documentation/hwmon/adm1275.rst
new file mode 100644
index 000000000..804590eea
--- /dev/null
+++ b/Documentation/hwmon/adm1275.rst
@@ -0,0 +1,148 @@
+Kernel driver adm1275
+=====================
+
+Supported chips:
+
+ * Analog Devices ADM1075
+
+ Prefix: 'adm1075'
+
+ Addresses scanned: -
+
+ Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
+
+ * Analog Devices ADM1272
+
+ Prefix: 'adm1272'
+
+ Addresses scanned: -
+
+ Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf
+
+ * Analog Devices ADM1275
+
+ Prefix: 'adm1275'
+
+ Addresses scanned: -
+
+ Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
+
+ * Analog Devices ADM1276
+
+ Prefix: 'adm1276'
+
+ Addresses scanned: -
+
+ Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
+
+ * Analog Devices ADM1278
+
+ Prefix: 'adm1278'
+
+ Addresses scanned: -
+
+ Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
+
+ * Analog Devices ADM1293/ADM1294
+
+ Prefix: 'adm1293', 'adm1294'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices ADM1075, ADM1272,
+ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and
+Digital Power Monitors.
+
+ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
+controllers that allow a circuit board to be removed from or inserted into
+a live backplane. They also feature current and voltage readback via an
+integrated 12 bit analog-to-digital converter (ADC), accessed using a
+PMBus interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+The ADM1075, unlike many other PMBus devices, does not support internal voltage
+or current scaling. Reported voltages, currents, and power are raw measurements,
+and will typically have to be scaled.
+
+The shunt value in micro-ohms can be set via device tree at compile-time. Please
+refer to the Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml for bindings
+if the device tree is used.
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus.rst for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write, history reset
+attributes are write-only, all other attributes are read-only.
+
+======================= =======================================================
+inX_label "vin1" or "vout1" depending on chip variant and
+ configuration. On ADM1075, ADM1293, and ADM1294,
+ vout1 reports the voltage on the VAUX pin.
+inX_input Measured voltage.
+inX_min Minimum Voltage.
+inX_max Maximum voltage.
+inX_min_alarm Voltage low alarm.
+inX_max_alarm Voltage high alarm.
+inX_highest Historical maximum voltage.
+inX_reset_history Write any value to reset history.
+
+curr1_label "iout1"
+curr1_input Measured current.
+curr1_max Maximum current.
+curr1_max_alarm Current high alarm.
+curr1_lcrit Critical minimum current. Depending on the chip
+ configuration, either curr1_lcrit or curr1_crit is
+ supported, but not both.
+curr1_lcrit_alarm Critical current low alarm.
+curr1_crit Critical maximum current. Depending on the chip
+ configuration, either curr1_lcrit or curr1_crit is
+ supported, but not both.
+curr1_crit_alarm Critical current high alarm.
+curr1_highest Historical maximum current.
+curr1_reset_history Write any value to reset history.
+
+power1_label "pin1"
+power1_input Input power.
+power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only.
+power1_input_highest Highest observed input power.
+power1_reset_history Write any value to reset history.
+
+ Power attributes are supported on ADM1075, ADM1272,
+ ADM1276, ADM1293, and ADM1294.
+
+temp1_input Chip temperature.
+temp1_max Maximum chip temperature.
+temp1_max_alarm Temperature alarm.
+temp1_crit Critical chip temperature.
+temp1_crit_alarm Critical temperature high alarm.
+temp1_highest Highest observed temperature.
+temp1_reset_history Write any value to reset history.
+
+ Temperature attributes are supported on ADM1272 and
+ ADM1278.
+======================= =======================================================
diff --git a/Documentation/hwmon/adm9240.rst b/Documentation/hwmon/adm9240.rst
new file mode 100644
index 000000000..91063b0f4
--- /dev/null
+++ b/Documentation/hwmon/adm9240.rst
@@ -0,0 +1,201 @@
+Kernel driver adm9240
+=====================
+
+Supported chips:
+
+ * Analog Devices ADM9240
+
+ Prefix: 'adm9240'
+
+ Addresses scanned: I2C 0x2c - 0x2f
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ http://www.analog.com/UploadedFiles/Data_Sheets/79857778ADM9240_0.pdf
+
+ * Dallas Semiconductor DS1780
+
+ Prefix: 'ds1780'
+
+ Addresses scanned: I2C 0x2c - 0x2f
+
+ Datasheet: Publicly available at the Dallas Semiconductor (Maxim) website
+
+ http://pdfserv.maxim-ic.com/en/ds/DS1780.pdf
+
+ * National Semiconductor LM81
+
+ Prefix: 'lm81'
+
+ Addresses scanned: I2C 0x2c - 0x2f
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/ds.cgi/LM/LM81.pdf
+
+Authors:
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Philip Edelbrock <phil@netroedge.com>,
+ - Michiel Rook <michiel@grendelproject.nl>,
+ - Grant Coady <gcoady.lk@gmail.com> with guidance
+ from Jean Delvare <jdelvare@suse.de>
+
+Interface
+---------
+The I2C addresses listed above assume BIOS has not changed the
+chip MSB 5-bit address. Each chip reports a unique manufacturer
+identification code as well as the chip revision/stepping level.
+
+Description
+-----------
+[From ADM9240] The ADM9240 is a complete system hardware monitor for
+microprocessor-based systems, providing measurement and limit comparison
+of up to four power supplies and two processor core voltages, plus
+temperature, two fan speeds and chassis intrusion. Measured values can
+be read out via an I2C-compatible serial System Management Bus, and values
+for limit comparisons can be programmed in over the same serial bus. The
+high speed successive approximation ADC allows frequent sampling of all
+analog channels to ensure a fast interrupt response to any out-of-limit
+measurement.
+
+The ADM9240, DS1780 and LM81 are register compatible, the following
+details are common to the three chips. Chip differences are described
+after this section.
+
+
+Measurements
+------------
+The measurement cycle
+
+The adm9240 driver will take a measurement reading no faster than once
+each two seconds. User-space may read sysfs interface faster than the
+measurement update rate and will receive cached data from the most
+recent measurement.
+
+ADM9240 has a very fast 320us temperature and voltage measurement cycle
+with independent fan speed measurement cycles counting alternating rising
+edges of the fan tacho inputs.
+
+DS1780 measurement cycle is about once per second including fan speed.
+
+LM81 measurement cycle is about once per 400ms including fan speed.
+The LM81 12-bit extended temperature measurement mode is not supported.
+
+Temperature
+-----------
+On chip temperature is reported as degrees Celsius as 9-bit signed data
+with resolution of 0.5 degrees Celsius. High and low temperature limits
+are 8-bit signed data with resolution of one degree Celsius.
+
+Temperature alarm is asserted once the temperature exceeds the high limit,
+and is cleared when the temperature falls below the temp1_max_hyst value.
+
+Fan Speed
+---------
+Two fan tacho inputs are provided, the ADM9240 gates an internal 22.5kHz
+clock via a divider to an 8-bit counter. Fan speed (rpm) is calculated by:
+
+rpm = (22500 * 60) / (count * divider)
+
+Automatic fan clock divider
+
+ * User sets 0 to fan_min limit
+
+ - low speed alarm is disabled
+ - fan clock divider not changed
+ - auto fan clock adjuster enabled for valid fan speed reading
+
+ * User sets fan_min limit too low
+
+ - low speed alarm is enabled
+ - fan clock divider set to max
+ - fan_min set to register value 254 which corresponds
+ to 664 rpm on adm9240
+ - low speed alarm will be asserted if fan speed is
+ less than minimum measurable speed
+ - auto fan clock adjuster disabled
+
+ * User sets reasonable fan speed
+
+ - low speed alarm is enabled
+ - fan clock divider set to suit fan_min
+ - auto fan clock adjuster enabled: adjusts fan_min
+
+ * User sets unreasonably high low fan speed limit
+
+ - resolution of the low speed limit may be reduced
+ - alarm will be asserted
+ - auto fan clock adjuster enabled: adjusts fan_min
+
+ * fan speed may be displayed as zero until the auto fan clock divider
+ adjuster brings fan speed clock divider back into chip measurement
+ range, this will occur within a few measurement cycles.
+
+Analog Output
+-------------
+An analog output provides a 0 to 1.25 volt signal intended for an external
+fan speed amplifier circuit. The analog output is set to maximum value on
+power up or reset. This doesn't do much on the test Intel SE440BX-2.
+
+Voltage Monitor
+
+^^^^^^^^^^^^^^^
+
+Voltage (IN) measurement is internally scaled:
+
+ === =========== =========== ========= ==========
+ nr label nominal maximum resolution
+ mV mV mV
+ === =========== =========== ========= ==========
+ 0 +2.5V 2500 3320 13.0
+ 1 Vccp1 2700 3600 14.1
+ 2 +3.3V 3300 4380 17.2
+ 3 +5V 5000 6640 26.0
+ 4 +12V 12000 15940 62.5
+ 5 Vccp2 2700 3600 14.1
+ === =========== =========== ========= ==========
+
+The reading is an unsigned 8-bit value, nominal voltage measurement is
+represented by a reading of 192, being 3/4 of the measurement range.
+
+An alarm is asserted for any voltage going below or above the set limits.
+
+The driver reports and accepts voltage limits scaled to the above table.
+
+VID Monitor
+-----------
+The chip has five inputs to read the 5-bit VID and reports the mV value
+based on detected CPU type.
+
+Chassis Intrusion
+-----------------
+An alarm is asserted when the CI pin goes active high. The ADM9240
+Datasheet has an example of an external temperature sensor driving
+this pin. On an Intel SE440BX-2 the Chassis Intrusion header is
+connected to a normally open switch.
+
+The ADM9240 provides an internal open drain on this line, and may output
+a 20 ms active low pulse to reset an external Chassis Intrusion latch.
+
+Clear the CI latch by writing value 0 to the sysfs intrusion0_alarm file.
+
+Alarm flags reported as 16-bit word
+
+ === ============= ==========================
+ bit label comment
+ === ============= ==========================
+ 0 +2.5 V_Error high or low limit exceeded
+ 1 VCCP_Error high or low limit exceeded
+ 2 +3.3 V_Error high or low limit exceeded
+ 3 +5 V_Error high or low limit exceeded
+ 4 Temp_Error temperature error
+ 6 FAN1_Error fan low limit exceeded
+ 7 FAN2_Error fan low limit exceeded
+ 8 +12 V_Error high or low limit exceeded
+ 9 VCCP2_Error high or low limit exceeded
+ 12 Chassis_Error CI pin went high
+ === ============= ==========================
+
+Remaining bits are reserved and thus undefined. It is important to note
+that alarm bits may be cleared on read, user-space may latch alarms and
+provide the end-user with a method to clear alarm memory.
diff --git a/Documentation/hwmon/ads7828.rst b/Documentation/hwmon/ads7828.rst
new file mode 100644
index 000000000..b830b490c
--- /dev/null
+++ b/Documentation/hwmon/ads7828.rst
@@ -0,0 +1,65 @@
+Kernel driver ads7828
+=====================
+
+Supported chips:
+
+ * Texas Instruments/Burr-Brown ADS7828
+
+ Prefix: 'ads7828'
+
+ Datasheet: Publicly available at the Texas Instruments website:
+
+ http://focus.ti.com/lit/ds/symlink/ads7828.pdf
+
+ * Texas Instruments ADS7830
+
+ Prefix: 'ads7830'
+
+ Datasheet: Publicly available at the Texas Instruments website:
+
+ http://focus.ti.com/lit/ds/symlink/ads7830.pdf
+
+Authors:
+ - Steve Hardy <shardy@redhat.com>
+ - Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ - Guillaume Roguez <guillaume.roguez@savoirfairelinux.com>
+
+Platform data
+-------------
+
+The ads7828 driver accepts an optional ads7828_platform_data structure (defined
+in include/linux/platform_data/ads7828.h). The structure fields are:
+
+* diff_input: (bool) Differential operation
+ set to true for differential mode, false for default single ended mode.
+
+* ext_vref: (bool) External reference
+ set to true if it operates with an external reference, false for default
+ internal reference.
+
+* vref_mv: (unsigned int) Voltage reference
+ if using an external reference, set this to the reference voltage in mV,
+ otherwise it will default to the internal value (2500mV). This value will be
+ bounded with limits accepted by the chip, described in the datasheet.
+
+ If no structure is provided, the configuration defaults to single ended
+ operation and internal voltage reference (2.5V).
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments ADS7828 and ADS7830.
+
+The ADS7828 device is a 12-bit 8-channel A/D converter, while the ADS7830 does
+8-bit sampling.
+
+It can operate in single ended mode (8 +ve inputs) or in differential mode,
+where 4 differential pairs can be measured.
+
+The chip also has the facility to use an external voltage reference. This
+may be required if your hardware supplies the ADS7828 from a 5V supply, see
+the datasheet for more details.
+
+There is no reliable way to identify this chip, so the driver will not scan
+some addresses to try to auto-detect it. That means that you will have to
+statically declare the device in the platform support code.
diff --git a/Documentation/hwmon/adt7410.rst b/Documentation/hwmon/adt7410.rst
new file mode 100644
index 000000000..3f5a43561
--- /dev/null
+++ b/Documentation/hwmon/adt7410.rst
@@ -0,0 +1,94 @@
+Kernel driver adt7410
+=====================
+
+Supported chips:
+
+ * Analog Devices ADT7410
+
+ Prefix: 'adt7410'
+
+ Addresses scanned: None
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ https://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf
+ * Analog Devices ADT7420
+
+ Prefix: 'adt7420'
+
+ Addresses scanned: None
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ https://www.analog.com/static/imported-files/data_sheets/ADT7420.pdf
+
+ * Analog Devices ADT7310
+
+ Prefix: 'adt7310'
+
+ Addresses scanned: None
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ https://www.analog.com/static/imported-files/data_sheets/ADT7310.pdf
+
+ * Analog Devices ADT7320
+
+ Prefix: 'adt7320'
+
+ Addresses scanned: None
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ https://www.analog.com/static/imported-files/data_sheets/ADT7320.pdf
+
+Author: Hartmut Knaack <knaack.h@gmx.de>
+
+Description
+-----------
+
+The ADT7310/ADT7410 is a temperature sensor with rated temperature range of
+-55°C to +150°C. It has a high accuracy of +/-0.5°C and can be operated at a
+resolution of 13 bits (0.0625°C) or 16 bits (0.0078°C). The sensor provides an
+INT pin to indicate that a minimum or maximum temperature set point has been
+exceeded, as well as a critical temperature (CT) pin to indicate that the
+critical temperature set point has been exceeded. Both pins can be set up with a
+common hysteresis of 0°C - 15°C and a fault queue, ranging from 1 to 4 events.
+Both pins can individually set to be active-low or active-high, while the whole
+device can either run in comparator mode or interrupt mode. The ADT7410 supports
+continuous temperature sampling, as well as sampling one temperature value per
+second or even just get one sample on demand for power saving. Besides, it can
+completely power down its ADC, if power management is required.
+
+The ADT7320/ADT7420 is register compatible, the only differences being the
+package, a slightly narrower operating temperature range (-40°C to +150°C), and
+a better accuracy (0.25°C instead of 0.50°C.)
+
+The difference between the ADT7310/ADT7320 and ADT7410/ADT7420 is the control
+interface, the ADT7310 and ADT7320 use SPI while the ADT7410 and ADT7420 use
+I2C.
+
+Configuration Notes
+-------------------
+
+Since the device uses one hysteresis value, which is an offset to minimum,
+maximum and critical temperature, it can only be set for temp#_max_hyst.
+However, temp#_min_hyst and temp#_crit_hyst show their corresponding
+hysteresis.
+The device is set to 16 bit resolution and comparator mode.
+
+sysfs-Interface
+---------------
+
+======================== ====================================================
+temp#_input temperature input
+temp#_min temperature minimum setpoint
+temp#_max temperature maximum setpoint
+temp#_crit critical temperature setpoint
+temp#_min_hyst hysteresis for temperature minimum (read-only)
+temp#_max_hyst hysteresis for temperature maximum (read/write)
+temp#_crit_hyst hysteresis for critical temperature (read-only)
+temp#_min_alarm temperature minimum alarm flag
+temp#_max_alarm temperature maximum alarm flag
+temp#_crit_alarm critical temperature alarm flag
+======================== ====================================================
diff --git a/Documentation/hwmon/adt7411.rst b/Documentation/hwmon/adt7411.rst
new file mode 100644
index 000000000..57ad16fb2
--- /dev/null
+++ b/Documentation/hwmon/adt7411.rst
@@ -0,0 +1,50 @@
+Kernel driver adt7411
+=====================
+
+Supported chips:
+
+ * Analog Devices ADT7411
+
+ Prefix: 'adt7411'
+
+ Addresses scanned: 0x48, 0x4a, 0x4b
+
+ Datasheet: Publicly available at the Analog Devices website
+
+Author: Wolfram Sang (based on adt7470 by Darrick J. Wong)
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7411 chip. There may
+be other chips that implement this interface.
+
+The ADT7411 can use an I2C/SMBus compatible 2-wire interface or an
+SPI-compatible 4-wire interface. It provides a 10-bit analog to digital
+converter which measures 1 temperature, vdd and 8 input voltages. It has an
+internal temperature sensor, but an external one can also be connected (one
+loses 2 inputs then). There are high- and low-limit registers for all inputs.
+
+Check the datasheet for details.
+
+sysfs-Interface
+---------------
+
+================ =================
+in0_input vdd voltage input
+in[1-8]_input analog 1-8 input
+temp1_input temperature input
+================ =================
+
+Besides standard interfaces, this driver adds (0 = off, 1 = on):
+
+ ============== =======================================================
+ adc_ref_vdd Use vdd as reference instead of 2.25 V
+ fast_sampling Sample at 22.5 kHz instead of 1.4 kHz, but drop filters
+ no_average Turn off averaging over 16 samples
+ ============== =======================================================
+
+Notes
+-----
+
+SPI, external temperature sensor and limit registers are not supported yet.
diff --git a/Documentation/hwmon/adt7462.rst b/Documentation/hwmon/adt7462.rst
new file mode 100644
index 000000000..139e19696
--- /dev/null
+++ b/Documentation/hwmon/adt7462.rst
@@ -0,0 +1,70 @@
+Kernel driver adt7462
+=====================
+
+Supported chips:
+
+ * Analog Devices ADT7462
+
+ Prefix: 'adt7462'
+
+ Addresses scanned: I2C 0x58, 0x5C
+
+ Datasheet: Publicly available at the Analog Devices website
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7462 chip family.
+
+This chip is a bit of a beast. It has 8 counters for measuring fan speed. It
+can also measure 13 voltages or 4 temperatures, or various combinations of the
+two. See the chip documentation for more details about the exact set of
+configurations. This driver does not allow one to configure the chip; that is
+left to the system designer.
+
+A sophisticated control system for the PWM outputs is designed into the ADT7462
+that allows fan speed to be adjusted automatically based on any of the three
+temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the ADT7462 will adjust the PWM outputs in
+response to the measured temperatures without further host intervention. This
+feature can also be disabled for manual control of the PWM's.
+
+Each of the measured inputs (voltage, temperature, fan speed) has
+corresponding high/low limit values. The ADT7462 will signal an ALARM if
+any measured value exceeds either limit.
+
+The ADT7462 samples all inputs continuously. The driver will not read
+the registers more often than once every other second. Further,
+configuration data is only read once per minute.
+
+Special Features
+----------------
+
+The ADT7462 have a 10-bit ADC and can therefore measure temperatures
+with 0.25 degC resolution.
+
+The Analog Devices datasheet is very detailed and describes a procedure for
+determining an optimal configuration for the automatic PWM control.
+
+The driver will report sensor labels when it is able to determine that
+information from the configuration registers.
+
+Configuration Notes
+-------------------
+
+Besides standard interfaces driver adds the following:
+
+* PWM Control
+
+* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
+* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
+
+ - point1: Set the pwm speed at a lower temperature bound.
+ - point2: Set the pwm speed at a higher temperature bound.
+
+The ADT7462 will scale the pwm between the lower and higher pwm speed when
+the temperature is between the two temperature boundaries. PWM values range
+from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the
+temperature sensor associated with the PWM control exceeds temp#_max.
diff --git a/Documentation/hwmon/adt7470.rst b/Documentation/hwmon/adt7470.rst
new file mode 100644
index 000000000..d225f816e
--- /dev/null
+++ b/Documentation/hwmon/adt7470.rst
@@ -0,0 +1,94 @@
+Kernel driver adt7470
+=====================
+
+Supported chips:
+
+ * Analog Devices ADT7470
+
+ Prefix: 'adt7470'
+
+ Addresses scanned: I2C 0x2C, 0x2E, 0x2F
+
+ Datasheet: Publicly available at the Analog Devices website
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7470 chip. There may
+be other chips that implement this interface.
+
+The ADT7470 uses the 2-wire interface compatible with the SMBus 2.0
+specification. Using an analog to digital converter it measures up to ten (10)
+external temperatures. It has four (4) 16-bit counters for measuring fan speed.
+There are four (4) PWM outputs that can be used to control fan speed.
+
+A sophisticated control system for the PWM outputs is designed into the ADT7470
+that allows fan speed to be adjusted automatically based on any of the ten
+temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the ADT7470 will adjust the PWM outputs in
+response to the measured temperatures with further host intervention. This
+feature can also be disabled for manual control of the PWM's.
+
+Each of the measured inputs (temperature, fan speed) has corresponding high/low
+limit values. The ADT7470 will signal an ALARM if any measured value exceeds
+either limit.
+
+The ADT7470 samples all inputs continuously. A kernel thread is started up for
+the purpose of periodically querying the temperature sensors, thus allowing the
+automatic fan pwm control to set the fan speed. The driver will not read the
+registers more often than once every 5 seconds. Further, configuration data is
+only read once per minute.
+
+Special Features
+----------------
+
+The ADT7470 has a 8-bit ADC and is capable of measuring temperatures with 1
+degC resolution.
+
+The Analog Devices datasheet is very detailed and describes a procedure for
+determining an optimal configuration for the automatic PWM control.
+
+Configuration Notes
+-------------------
+
+Besides standard interfaces driver adds the following:
+
+* PWM Control
+
+* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and
+* pwm#_auto_point2_pwm and pwm#_auto_point2_temp -
+
+ - point1: Set the pwm speed at a lower temperature bound.
+ - point2: Set the pwm speed at a higher temperature bound.
+
+The ADT7470 will scale the pwm between the lower and higher pwm speed when
+the temperature is between the two temperature boundaries. PWM values range
+from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the
+temperature sensor associated with the PWM control exceeds
+pwm#_auto_point2_temp.
+
+The driver also allows control of the PWM frequency:
+
+* pwm1_freq
+
+The PWM frequency is rounded to the nearest one of:
+
+* 11.0 Hz
+* 14.7 Hz
+* 22.1 Hz
+* 29.4 Hz
+* 35.3 Hz
+* 44.1 Hz
+* 58.8 Hz
+* 88.2 Hz
+* 1.4 kHz
+* 22.5 kHz
+
+Notes
+-----
+
+The temperature inputs no longer need to be read periodically from userspace in
+order for the automatic pwm algorithm to run. This was the case for earlier
+versions of the driver.
diff --git a/Documentation/hwmon/adt7475.rst b/Documentation/hwmon/adt7475.rst
new file mode 100644
index 000000000..ef3ea1ea9
--- /dev/null
+++ b/Documentation/hwmon/adt7475.rst
@@ -0,0 +1,156 @@
+Kernel driver adt7475
+=====================
+
+Supported chips:
+
+ * Analog Devices ADT7473
+
+ Prefix: 'adt7473'
+
+ Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+
+ Datasheet: Publicly available at the On Semiconductors website
+
+ * Analog Devices ADT7475
+
+ Prefix: 'adt7475'
+
+ Addresses scanned: I2C 0x2E
+
+ Datasheet: Publicly available at the On Semiconductors website
+
+ * Analog Devices ADT7476
+
+ Prefix: 'adt7476'
+
+ Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+
+ Datasheet: Publicly available at the On Semiconductors website
+
+ * Analog Devices ADT7490
+
+ Prefix: 'adt7490'
+
+ Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+
+ Datasheet: Publicly available at the On Semiconductors website
+
+Authors:
+ - Jordan Crouse
+ - Hans de Goede
+ - Darrick J. Wong (documentation)
+ - Jean Delvare
+
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7473, ADT7475,
+ADT7476 and ADT7490 chip family. The ADT7473 and ADT7475 differ only in
+minor details. The ADT7476 has additional features, including extra voltage
+measurement inputs and VID support. The ADT7490 also has additional
+features, including extra voltage measurement inputs and PECI support. All
+the supported chips will be collectively designed by the name "ADT747x" in
+the rest of this document.
+
+The ADT747x uses the 2-wire interface compatible with the SMBus 2.0
+specification. Using an analog to digital converter it measures three (3)
+temperatures and two (2) or more voltages. It has four (4) 16-bit counters
+for measuring fan speed. There are three (3) PWM outputs that can be used
+to control fan speed.
+
+A sophisticated control system for the PWM outputs is designed into the
+ADT747x that allows fan speed to be adjusted automatically based on any of the
+three temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the ADT747x will adjust the PWM outputs in
+response to the measured temperatures without further host intervention.
+This feature can also be disabled for manual control of the PWM's.
+
+Each of the measured inputs (voltage, temperature, fan speed) has
+corresponding high/low limit values. The ADT747x will signal an ALARM if
+any measured value exceeds either limit.
+
+The ADT747x samples all inputs continuously. The driver will not read
+the registers more often than once every other second. Further,
+configuration data is only read once per minute.
+
+Chip Differences Summary
+------------------------
+
+ADT7473:
+ * 2 voltage inputs
+ * system acoustics optimizations (not implemented)
+
+ADT7475:
+ * 2 voltage inputs
+
+ADT7476:
+ * 5 voltage inputs
+ * VID support
+
+ADT7490:
+ * 6 voltage inputs
+ * 1 Imon input (not implemented)
+ * PECI support (not implemented)
+ * 2 GPIO pins (not implemented)
+ * system acoustics optimizations (not implemented)
+
+Sysfs Mapping
+-------------
+
+==== =========== =========== ========= ==========
+in ADT7490 ADT7476 ADT7475 ADT7473
+==== =========== =========== ========= ==========
+in0 2.5VIN (22) 2.5VIN (22) - -
+in1 VCCP (23) VCCP (23) VCCP (14) VCCP (14)
+in2 VCC (4) VCC (4) VCC (4) VCC (3)
+in3 5VIN (20) 5VIN (20)
+in4 12VIN (21) 12VIN (21)
+in5 VTT (8)
+==== =========== =========== ========= ==========
+
+Special Features
+----------------
+
+The ADT747x has a 10-bit ADC and can therefore measure temperatures
+with a resolution of 0.25 degree Celsius. Temperature readings can be
+configured either for two's complement format or "Offset 64" format,
+wherein 64 is subtracted from the raw value to get the temperature value.
+
+The datasheet is very detailed and describes a procedure for determining
+an optimal configuration for the automatic PWM control.
+
+Fan Speed Control
+-----------------
+
+The driver exposes two trip points per PWM channel.
+
+- point1: Set the PWM speed at the lower temperature bound
+- point2: Set the PWM speed at the higher temperature bound
+
+The ADT747x will scale the PWM linearly between the lower and higher PWM
+speed when the temperature is between the two temperature boundaries.
+Temperature boundaries are associated to temperature channels rather than
+PWM outputs, and a given PWM output can be controlled by several temperature
+channels. As a result, the ADT747x may compute more than one PWM value
+for a channel at a given time, in which case the maximum value (fastest
+fan speed) is applied. PWM values range from 0 (off) to 255 (full speed).
+
+Fan speed may be set to maximum when the temperature sensor associated with
+the PWM control exceeds temp#_max.
+
+At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the
+minimum (i.e. auto_point1_pwm). This behaviour can be configured using the
+`pwm[1-*]_stall_disable sysfs attribute`. A value of 0 means the fans will shut
+off. A value of 1 means the fans will run at auto_point1_pwm.
+
+The responsiveness of the ADT747x to temperature changes can be configured.
+This allows smoothing of the fan speed transition. To set the transition time
+set the value in ms in the `temp[1-*]_smoothing` sysfs attribute.
+
+Notes
+-----
+
+The nVidia binary driver presents an ADT7473 chip via an on-card i2c bus.
+Unfortunately, they fail to set the i2c adapter class, so this driver may
+fail to find the chip until the nvidia driver is patched.
diff --git a/Documentation/hwmon/aht10.rst b/Documentation/hwmon/aht10.rst
new file mode 100644
index 000000000..482262ca1
--- /dev/null
+++ b/Documentation/hwmon/aht10.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver aht10
+=====================
+
+Supported chips:
+
+ * Aosong AHT10
+
+ Prefix: 'aht10'
+
+ Addresses scanned: None
+
+ Datasheet:
+
+ Chinese: http://www.aosong.com/userfiles/files/media/AHT10%E4%BA%A7%E5%93%81%E6%89%8B%E5%86%8C%20A3%2020201210.pdf
+ English: https://server4.eca.ir/eshop/AHT10/Aosong_AHT10_en_draft_0c.pdf
+
+Author: Johannes Cornelis Draaijer <jcdra1@gmail.com>
+
+
+Description
+-----------
+
+The AHT10 is a Temperature and Humidity sensor
+
+The address of this i2c device may only be 0x38
+
+Usage Notes
+-----------
+
+This driver does not probe for AHT10 devices, as there is no reliable
+way to determine if an i2c chip is or isn't an AHT10. The device has
+to be instantiated explicitly with the address 0x38. See
+Documentation/i2c/instantiating-devices.rst for details.
+
+Sysfs entries
+-------------
+
+=============== ============================================
+temp1_input Measured temperature in millidegrees Celcius
+humidity1_input Measured humidity in %H
+update_interval The minimum interval for polling the sensor,
+ in milliseconds. Writable. Must be at
+ least 2000.
+=============== ============================================
diff --git a/Documentation/hwmon/amc6821.rst b/Documentation/hwmon/amc6821.rst
new file mode 100644
index 000000000..5ddb2849d
--- /dev/null
+++ b/Documentation/hwmon/amc6821.rst
@@ -0,0 +1,108 @@
+Kernel driver amc6821
+=====================
+
+Supported chips:
+
+ Texas Instruments AMC6821
+
+ Prefix: 'amc6821'
+
+ Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
+
+Authors:
+ Tomaz Mertelj <tomaz.mertelj@guest.arnes.si>
+
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments amc6821 chip.
+The chip has one on-chip and one remote temperature sensor and one pwm fan
+regulator.
+The pwm can be controlled either from software or automatically.
+
+The driver provides the following sensor accesses in sysfs:
+
+======================= == ===============================================
+temp1_input ro on-chip temperature
+temp1_min rw "
+temp1_max rw "
+temp1_crit rw "
+temp1_min_alarm ro "
+temp1_max_alarm ro "
+temp1_crit_alarm ro "
+
+temp2_input ro remote temperature
+temp2_min rw "
+temp2_max rw "
+temp2_crit rw "
+temp2_min_alarm ro "
+temp2_max_alarm ro "
+temp2_crit_alarm ro "
+temp2_fault ro "
+
+fan1_input ro tachometer speed
+fan1_min rw "
+fan1_max rw "
+fan1_fault ro "
+fan1_div rw Fan divisor can be either 2 or 4.
+
+pwm1 rw pwm1
+pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled
+ by remote temperature, 3=fan controlled by
+ combination of the on-chip temperature and
+ remote-sensor temperature,
+pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3
+pwm1_auto_point1_pwm ro Hardwired to 0, shared for both
+ temperature channels.
+pwm1_auto_point2_pwm rw This value is shared for both temperature
+ channels.
+pwm1_auto_point3_pwm rw Hardwired to 255, shared for both
+ temperature channels.
+
+temp1_auto_point1_temp ro Hardwired to temp2_auto_point1_temp
+ which is rw. Below this temperature fan stops.
+temp1_auto_point2_temp rw The low-temperature limit of the proportional
+ range. Below this temperature
+ pwm1 = pwm1_auto_point2_pwm. It can go from
+ 0 degree C to 124 degree C in steps of
+ 4 degree C. Read it out after writing to get
+ the actual value.
+temp1_auto_point3_temp rw Above this temperature fan runs at maximum
+ speed. It can go from temp1_auto_point2_temp.
+ It can only have certain discrete values
+ which depend on temp1_auto_point2_temp and
+ pwm1_auto_point2_pwm. Read it out after
+ writing to get the actual value.
+
+temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and
+ it defines the passive cooling temperature.
+ Below this temperature the fan stops in
+ the closed loop mode.
+temp2_auto_point2_temp rw The low-temperature limit of the proportional
+ range. Below this temperature
+ pwm1 = pwm1_auto_point2_pwm. It can go from
+ 0 degree C to 124 degree C in steps
+ of 4 degree C.
+
+temp2_auto_point3_temp rw Above this temperature fan runs at maximum
+ speed. It can only have certain discrete
+ values which depend on temp2_auto_point2_temp
+ and pwm1_auto_point2_pwm. Read it out after
+ writing to get actual value.
+======================= == ===============================================
+
+
+Module parameters
+-----------------
+
+If your board has a BIOS that initializes the amc6821 correctly, you should
+load the module with: init=0.
+
+If your board BIOS doesn't initialize the chip, or you want
+different settings, you can set the following parameters:
+
+- init=1,
+- pwminv: 0 default pwm output, 1 inverts pwm output.
diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
new file mode 100644
index 000000000..e238533b5
--- /dev/null
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver aquacomputer-d5next
+=================================
+
+Supported devices:
+
+* Aquacomputer D5 Next watercooling pump
+* Aquacomputer Farbwerk RGB controller
+* Aquacomputer Farbwerk 360 RGB controller
+* Aquacomputer Octo fan controller
+* Aquacomputer Quadro fan controller
+* Aquacomputer High Flow Next sensor
+
+Author: Aleksa Savic
+
+Description
+-----------
+
+This driver exposes hardware sensors of listed Aquacomputer devices, which
+communicate through proprietary USB HID protocols.
+
+For the D5 Next pump, available sensors are pump and fan speed, power, voltage
+and current, as well as coolant temperature and eight virtual temp sensors. Also
+available through debugfs are the serial number, firmware version and power-on
+count. Attaching a fan to it is optional and allows it to be controlled using
+temperature curves directly from the pump. If it's not connected, the fan-related
+sensors will report zeroes.
+
+The pump can be configured either through software or via its physical
+interface. Configuring the pump through this driver is not implemented, as it
+seems to require sending it a complete configuration. That includes addressable
+RGB LEDs, for which there is no standard sysfs interface. Thus, that task is
+better suited for userspace tools.
+
+The Octo exposes four physical and sixteen virtual temperature sensors, as well as
+eight PWM controllable fans, along with their speed (in RPM), power, voltage and
+current.
+
+The Quadro exposes four physical and sixteen virtual temperature sensors, a flow
+sensor and four PWM controllable fans, along with their speed (in RPM), power,
+voltage and current.
+
+The Farbwerk and Farbwerk 360 expose four temperature sensors. Additionally,
+sixteen virtual temperature sensors of the Farbwerk 360 are exposed.
+
+The High Flow Next exposes +5V voltages, water quality, conductivity and flow readings.
+A temperature sensor can be connected to it, in which case it provides its reading
+and an estimation of the dissipated/absorbed power in the liquid cooling loop.
+
+Depending on the device, not all sysfs and debugfs entries will be available.
+Writing to virtual temperature sensors is not currently supported.
+
+Usage notes
+-----------
+
+The devices communicate via HID reports. The driver is loaded automatically by
+the kernel and supports hotswapping.
+
+Sysfs entries
+-------------
+
+================ ==============================================================
+temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
+fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
+power[1-8]_input Pump/fan power (in micro Watts)
+in[0-7]_input Pump/fan voltage (in milli Volts)
+curr[1-8]_input Pump/fan current (in milli Amperes)
+pwm[1-8] Fan PWM (0 - 255)
+================ ==============================================================
+
+Debugfs entries
+---------------
+
+================ =================================================
+serial_number Serial number of the device
+firmware_version Version of installed firmware
+power_cycles Count of how many times the device was powered on
+================ =================================================
diff --git a/Documentation/hwmon/asb100.rst b/Documentation/hwmon/asb100.rst
new file mode 100644
index 000000000..c2d5f9708
--- /dev/null
+++ b/Documentation/hwmon/asb100.rst
@@ -0,0 +1,73 @@
+Kernel driver asb100
+====================
+
+Supported Chips:
+
+ * Asus ASB100 and ASB100-A "Bach"
+
+ Prefix: 'asb100'
+
+ Addresses scanned: I2C 0x2d
+
+ Datasheet: none released
+
+Author: Mark M. Hoffman <mhoffman@lightlink.com>
+
+Description
+-----------
+
+This driver implements support for the Asus ASB100 and ASB100-A "Bach".
+These are custom ASICs available only on Asus mainboards. Asus refuses to
+supply a datasheet for these chips. Thanks go to many people who helped
+investigate their hardware, including:
+
+Vitaly V. Bursov
+Alexander van Kaam (author of MBM for Windows)
+Bertrik Sikken
+
+The ASB100 implements seven voltage sensors, three fan rotation speed
+sensors, four temperature sensors, VID lines and alarms. In addition to
+these, the ASB100-A also implements a single PWM controller for fans 2 and
+3 (i.e. one setting controls both.) If you have a plain ASB100, the PWM
+controller will simply not work (or maybe it will for you... it doesn't for
+me).
+
+Temperatures are measured and reported in degrees Celsius.
+
+Fan speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit.
+
+Voltage sensors (also known as IN sensors) report values in volts.
+
+The VID lines encode the core voltage value: the voltage level your
+processor should work with. This is hardcoded by the mainboard and/or
+processor itself. It is a value in volts.
+
+Alarms: (TODO question marks indicate may or may not work)
+
+- 0x0001 => in0 (?)
+- 0x0002 => in1 (?)
+- 0x0004 => in2
+- 0x0008 => in3
+- 0x0010 => temp1 [1]_
+- 0x0020 => temp2
+- 0x0040 => fan1
+- 0x0080 => fan2
+- 0x0100 => in4
+- 0x0200 => in5 (?) [2]_
+- 0x0400 => in6 (?) [2]_
+- 0x0800 => fan3
+- 0x1000 => chassis switch
+- 0x2000 => temp3
+
+.. [1] This alarm will only trigger if the hysteresis value is 127C.
+ I.e. it behaves the same as w83781d.
+
+.. [2] The min and max registers for these values appear to
+ be read-only or otherwise stuck at 0x00.
+
+TODO:
+ * Experiment with fan divisors > 8.
+ * Experiment with temp. sensor types.
+ * Are there really 13 voltage inputs? Probably not...
+ * Cleanups, no doubt...
diff --git a/Documentation/hwmon/asc7621.rst b/Documentation/hwmon/asc7621.rst
new file mode 100644
index 000000000..b5a9fad0f
--- /dev/null
+++ b/Documentation/hwmon/asc7621.rst
@@ -0,0 +1,326 @@
+=====================
+Kernel driver asc7621
+=====================
+
+Supported chips:
+
+ Andigilog aSC7621 and aSC7621a
+
+ Prefix: 'asc7621'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: http://www.fairview5.com/linux/asc7621/asc7621.pdf
+
+Author:
+ George Joseph
+
+Description provided by Dave Pivin @ Andigilog:
+
+Andigilog has both the PECI and pre-PECI versions of the Heceta-6, as
+Intel calls them. Heceta-6e has high frequency PWM and Heceta-6p has
+added PECI and a 4th thermal zone. The Andigilog aSC7611 is the
+Heceta-6e part and aSC7621 is the Heceta-6p part. They are both in
+volume production, shipping to Intel and their subs.
+
+We have enhanced both parts relative to the governing Intel
+specification. First enhancement is temperature reading resolution. We
+have used registers below 20h for vendor-specific functions in addition
+to those in the Intel-specified vendor range.
+
+Our conversion process produces a result that is reported as two bytes.
+The fan speed control uses this finer value to produce a "step-less" fan
+PWM output. These two bytes are "read-locked" to guarantee that once a
+high or low byte is read, the other byte is locked-in until after the
+next read of any register. So to get an atomic reading, read high or low
+byte, then the very next read should be the opposite byte. Our data
+sheet says 10-bits of resolution, although you may find the lower bits
+are active, they are not necessarily reliable or useful externally. We
+chose not to mask them.
+
+We employ significant filtering that is user tunable as described in the
+data sheet. Our temperature reports and fan PWM outputs are very smooth
+when compared to the competition, in addition to the higher resolution
+temperature reports. The smoother PWM output does not require user
+intervention.
+
+We offer GPIO features on the former VID pins. These are open-drain
+outputs or inputs and may be used as general purpose I/O or as alarm
+outputs that are based on temperature limits. These are in 19h and 1Ah.
+
+We offer flexible mapping of temperature readings to thermal zones. Any
+temperature may be mapped to any zone, which has a default assignment
+that follows Intel's specs.
+
+Since there is a fan to zone assignment that allows for the "hotter" of
+a set of zones to control the PWM of an individual fan, but there is no
+indication to the user, we have added an indicator that shows which zone
+is currently controlling the PWM for a given fan. This is in register
+00h.
+
+Both remote diode temperature readings may be given an offset value such
+that the reported reading as well as the temperature used to determine
+PWM may be offset for system calibration purposes.
+
+PECI Extended configuration allows for having more than two domains per
+PECI address and also provides an enabling function for each PECI
+address. One could use our flexible zone assignment to have a zone
+assigned to up to 4 PECI addresses. This is not possible in the default
+Intel configuration. This would be useful in multi-CPU systems with
+individual fans on each that would benefit from individual fan control.
+This is in register 0Eh.
+
+The tachometer measurement system is flexible and able to adapt to many
+fan types. We can also support pulse-stretched PWM so that 3-wire fans
+may be used. These characteristics are in registers 04h to 07h.
+
+Finally, we have added a tach disable function that turns off the tach
+measurement system for individual tachs in order to save power. That is
+in register 75h.
+
+--------------------------------------------------------------------------
+
+aSC7621 Product Description
+===========================
+
+The aSC7621 has a two wire digital interface compatible with SMBus 2.0.
+Using a 10-bit ADC, the aSC7621 measures the temperature of two remote diode
+connected transistors as well as its own die. Support for Platform
+Environmental Control Interface (PECI) is included.
+
+Using temperature information from these four zones, an automatic fan speed
+control algorithm is employed to minimize acoustic impact while achieving
+recommended CPU temperature under varying operational loads.
+
+To set fan speed, the aSC7621 has three independent pulse width modulation
+(PWM) outputs that are controlled by one, or a combination of three,
+temperature zones. Both high- and low-frequency PWM ranges are supported.
+
+The aSC7621 also includes a digital filter that can be invoked to smooth
+temperature readings for better control of fan speed and minimum acoustic
+impact.
+
+The aSC7621 has tachometer inputs to measure fan speed on up to four fans.
+Limit and status registers for all measured values are included to alert
+the system host that any measurements are outside of programmed limits
+via status registers.
+
+System voltages of VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard power are
+monitored efficiently with internal scaling resistors.
+
+Features
+--------
+
+- Supports PECI interface and monitors internal and remote thermal diodes
+- 2-wire, SMBus 2.0 compliant, serial interface
+- 10-bit ADC
+- Monitors VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard/processor supplies
+- Programmable autonomous fan control based on temperature readings
+- Noise filtering of temperature reading for fan speed control
+- 0.25C digital temperature sensor resolution
+- 3 PWM fan speed control outputs for 2-, 3- or 4-wire fans and up to 4 fan
+ tachometer inputs
+- Enhanced measured temperature to Temperature Zone assignment.
+- Provides high and low PWM frequency ranges
+- 3 GPIO pins for custom use
+- 24-Lead QSOP package
+
+Configuration Notes
+===================
+
+Except where noted below, the sysfs entries created by this driver follow
+the standards defined in "sysfs-interface".
+
+temp1_source
+ = ===============================================
+ 0 (default) peci_legacy = 0, Remote 1 Temperature
+ peci_legacy = 1, PECI Processor Temperature 0
+ 1 Remote 1 Temperature
+ 2 Remote 2 Temperature
+ 3 Internal Temperature
+ 4 PECI Processor Temperature 0
+ 5 PECI Processor Temperature 1
+ 6 PECI Processor Temperature 2
+ 7 PECI Processor Temperature 3
+ = ===============================================
+
+temp2_source
+ = ===============================================
+ 0 (default) Internal Temperature
+ 1 Remote 1 Temperature
+ 2 Remote 2 Temperature
+ 3 Internal Temperature
+ 4 PECI Processor Temperature 0
+ 5 PECI Processor Temperature 1
+ 6 PECI Processor Temperature 2
+ 7 PECI Processor Temperature 3
+ = ===============================================
+
+temp3_source
+ = ===============================================
+ 0 (default) Remote 2 Temperature
+ 1 Remote 1 Temperature
+ 2 Remote 2 Temperature
+ 3 Internal Temperature
+ 4 PECI Processor Temperature 0
+ 5 PECI Processor Temperature 1
+ 6 PECI Processor Temperature 2
+ 7 PECI Processor Temperature 3
+ = ===============================================
+
+temp4_source
+ = ===============================================
+ 0 (default) peci_legacy = 0, PECI Processor Temperature 0
+ peci_legacy = 1, Remote 1 Temperature
+ 1 Remote 1 Temperature
+ 2 Remote 2 Temperature
+ 3 Internal Temperature
+ 4 PECI Processor Temperature 0
+ 5 PECI Processor Temperature 1
+ 6 PECI Processor Temperature 2
+ 7 PECI Processor Temperature 3
+ = ===============================================
+
+temp[1-4]_smoothing_enable / temp[1-4]_smoothing_time
+ Smooths spikes in temp readings caused by noise.
+ Valid values in milliseconds are:
+
+ * 35000
+ * 17600
+ * 11800
+ * 7000
+ * 4400
+ * 3000
+ * 1600
+ * 800
+
+temp[1-4]_crit
+ When the corresponding zone temperature reaches this value,
+ ALL pwm outputs will got to 100%.
+
+temp[5-8]_input / temp[5-8]_enable
+ The aSC7621 can also read temperatures provided by the processor
+ via the PECI bus. Usually these are "core" temps and are relative
+ to the point where the automatic thermal control circuit starts
+ throttling. This means that these are usually negative numbers.
+
+pwm[1-3]_enable
+ =============== ========================================================
+ 0 Fan off.
+ 1 Fan on manual control.
+ 2 Fan on automatic control and will run at the minimum pwm
+ if the temperature for the zone is below the minimum.
+ 3 Fan on automatic control but will be off if the
+ temperature for the zone is below the minimum.
+ 4-254 Ignored.
+ 255 Fan on full.
+ =============== ========================================================
+
+pwm[1-3]_auto_channels
+ Bitmap as described in sysctl-interface with the following
+ exceptions...
+
+ Only the following combination of zones (and their corresponding masks)
+ are valid:
+
+ * 1
+ * 2
+ * 3
+ * 2,3
+ * 1,2,3
+ * 4
+ * 1,2,3,4
+
+ * Special values:
+
+ == ======================
+ 0 Disabled.
+ 16 Fan on manual control.
+ 31 Fan on full.
+ == ======================
+
+
+pwm[1-3]_invert
+ When set, inverts the meaning of pwm[1-3].
+ i.e. when pwm = 0, the fan will be on full and
+ when pwm = 255 the fan will be off.
+
+pwm[1-3]_freq
+ PWM frequency in Hz
+ Valid values in Hz are:
+
+ * 10
+ * 15
+ * 23
+ * 30 (default)
+ * 38
+ * 47
+ * 62
+ * 94
+ * 23000
+ * 24000
+ * 25000
+ * 26000
+ * 27000
+ * 28000
+ * 29000
+ * 30000
+
+ Setting any other value will be ignored.
+
+peci_enable
+ Enables or disables PECI
+
+peci_avg
+ Input filter average time.
+
+ * 0 0 Sec. (no Smoothing) (default)
+ * 1 0.25 Sec.
+ * 2 0.5 Sec.
+ * 3 1.0 Sec.
+ * 4 2.0 Sec.
+ * 5 4.0 Sec.
+ * 6 8.0 Sec.
+ * 7 0.0 Sec.
+
+peci_legacy
+ = ============================================
+ 0 Standard Mode (default)
+ Remote Diode 1 reading is associated with
+ Temperature Zone 1, PECI is associated with
+ Zone 4
+
+ 1 Legacy Mode
+ PECI is associated with Temperature Zone 1,
+ Remote Diode 1 is associated with Zone 4
+ = ============================================
+
+peci_diode
+ Diode filter
+
+ = ====================
+ 0 0.25 Sec.
+ 1 1.1 Sec.
+ 2 2.4 Sec. (default)
+ 3 3.4 Sec.
+ 4 5.0 Sec.
+ 5 6.8 Sec.
+ 6 10.2 Sec.
+ 7 16.4 Sec.
+ = ====================
+
+peci_4domain
+ Four domain enable
+
+ = ===============================================
+ 0 1 or 2 Domains for enabled processors (default)
+ 1 3 or 4 Domains for enabled processors
+ = ===============================================
+
+peci_domain
+ Domain
+
+ = ==================================================
+ 0 Processor contains a single domain (0) (default)
+ 1 Processor contains two domains (0,1)
+ = ==================================================
diff --git a/Documentation/hwmon/aspeed-pwm-tacho.rst b/Documentation/hwmon/aspeed-pwm-tacho.rst
new file mode 100644
index 000000000..6dcec845f
--- /dev/null
+++ b/Documentation/hwmon/aspeed-pwm-tacho.rst
@@ -0,0 +1,24 @@
+Kernel driver aspeed-pwm-tacho
+==============================
+
+Supported chips:
+ ASPEED AST2400/2500
+
+Authors:
+ <jaghu@google.com>
+
+Description:
+------------
+This driver implements support for ASPEED AST2400/2500 PWM and Fan Tacho
+controller. The PWM controller supports upto 8 PWM outputs. The Fan tacho
+controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+=============== ======= =====================================================
+fanX_input ro provide current fan rotation value in RPM as reported
+ by the fan to the device.
+
+pwmX rw get or set PWM fan control value. This is an integer
+ value between 0(off) and 255(full speed).
+=============== ======= =====================================================
diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst
new file mode 100644
index 000000000..02f4ad314
--- /dev/null
+++ b/Documentation/hwmon/asus_ec_sensors.rst
@@ -0,0 +1,63 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_ec_sensors
+=================================
+
+Supported boards:
+ * PRIME X470-PRO
+ * PRIME X570-PRO
+ * Pro WS X570-ACE
+ * ProArt X570-CREATOR WIFI
+ * ROG CROSSHAIR VIII DARK HERO
+ * ROG CROSSHAIR VIII HERO (WI-FI)
+ * ROG CROSSHAIR VIII FORMULA
+ * ROG CROSSHAIR VIII HERO
+ * ROG CROSSHAIR VIII IMPACT
+ * ROG MAXIMUS XI HERO
+ * ROG MAXIMUS XI HERO (WI-FI)
+ * ROG STRIX B550-E GAMING
+ * ROG STRIX B550-I GAMING
+ * ROG STRIX X570-E GAMING
+ * ROG STRIX X570-E GAMING WIFI II
+ * ROG STRIX X570-F GAMING
+ * ROG STRIX X570-I GAMING
+ * ROG STRIX Z690-A GAMING WIFI D4
+ * ROG ZENITH II EXTREME
+
+Authors:
+ - Eugene Shalygin <eugene.shalygin@gmail.com>
+
+Description:
+------------
+ASUS mainboards publish hardware monitoring information via Super I/O
+chip and the ACPI embedded controller (EC) registers. Some of the sensors
+are only available via the EC.
+
+The driver is aware of and reads the following sensors:
+
+1. Chipset (PCH) temperature
+2. CPU package temperature
+3. Motherboard temperature
+4. Readings from the T_Sensor header
+5. VRM temperature
+6. CPU_Opt fan RPM
+7. VRM heatsink fan RPM
+8. Chipset fan RPM
+9. Readings from the "Water flow meter" header (RPM)
+10. Readings from the "Water In" and "Water Out" temperature headers
+11. CPU current
+12. CPU core voltage
+
+Sensor values are read from EC registers, and to avoid race with the board
+firmware the driver acquires ACPI mutex, the one used by the WMI when its
+methods access the EC.
+
+Module Parameters
+-----------------
+ * mutex_path: string
+ The driver holds path to the ACPI mutex for each board (actually,
+ the path is mostly identical for them). If ASUS changes this path
+ in a future BIOS update, this parameter can be used to override
+ the stored in the driver value until it gets updated.
+ A special string ":GLOBAL_LOCK" can be passed to use the ACPI
+ global lock instead of a dedicated mutex.
diff --git a/Documentation/hwmon/asus_wmi_sensors.rst b/Documentation/hwmon/asus_wmi_sensors.rst
new file mode 100644
index 000000000..8f2096cf5
--- /dev/null
+++ b/Documentation/hwmon/asus_wmi_sensors.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_wmi_sensors
+=================================
+
+Supported boards:
+ * PRIME X399-A,
+ * PRIME X470-PRO,
+ * ROG CROSSHAIR VI EXTREME,
+ * ROG CROSSHAIR VI HERO,
+ * ROG CROSSHAIR VI HERO (WI-FI AC),
+ * ROG CROSSHAIR VII HERO,
+ * ROG CROSSHAIR VII HERO (WI-FI),
+ * ROG STRIX B450-E GAMING,
+ * ROG STRIX B450-F GAMING,
+ * ROG STRIX B450-I GAMING,
+ * ROG STRIX X399-E GAMING,
+ * ROG STRIX X470-F GAMING,
+ * ROG STRIX X470-I GAMING,
+ * ROG ZENITH EXTREME,
+ * ROG ZENITH EXTREME ALPHA.
+
+Authors:
+ - Ed Brindley <kernel@maidavale.org>
+
+Description:
+------------
+ASUS mainboards publish hardware monitoring information via WMI interface.
+
+ASUS WMI interface provides a methods to get list of sensors and values of
+such, which is utilized by this driver to publish those sensor readings to the
+HWMON system.
+
+The driver is aware of and reads the following sensors:
+ * CPU Core Voltage,
+ * CPU SOC Voltage,
+ * DRAM Voltage,
+ * VDDP Voltage,
+ * 1.8V PLL Voltage,
+ * +12V Voltage,
+ * +5V Voltage,
+ * 3VSB Voltage,
+ * VBAT Voltage,
+ * AVCC3 Voltage,
+ * SB 1.05V Voltage,
+ * CPU Core Voltage,
+ * CPU SOC Voltage,
+ * DRAM Voltage,
+ * CPU Fan RPM,
+ * Chassis Fan 1 RPM,
+ * Chassis Fan 2 RPM,
+ * Chassis Fan 3 RPM,
+ * HAMP Fan RPM,
+ * Water Pump RPM,
+ * CPU OPT RPM,
+ * Water Flow RPM,
+ * AIO Pump RPM,
+ * CPU Temperature,
+ * CPU Socket Temperature,
+ * Motherboard Temperature,
+ * Chipset Temperature,
+ * Tsensor 1 Temperature,
+ * CPU VRM Temperature,
+ * Water In,
+ * Water Out,
+ * CPU VRM Output Current.
+
+Known Issues:
+ * The WMI implementation in some of Asus' BIOSes is buggy. This can result in
+ fans stopping, fans getting stuck at max speed, or temperature readouts
+ getting stuck. This is not an issue with the driver, but the BIOS. The Prime
+ X470 Pro seems particularly bad for this. The more frequently the WMI
+ interface is polled the greater the potential for this to happen. Until you
+ have subjected your computer to an extended soak test while polling the
+ sensors frequently, don't leave you computer unattended. Upgrading to new
+ BIOS version with method version greater than or equal to two should
+ rectify the issue.
+ * A few boards report 12v voltages to be ~10v.
diff --git a/Documentation/hwmon/bcm54140.rst b/Documentation/hwmon/bcm54140.rst
new file mode 100644
index 000000000..bc6ea4b45
--- /dev/null
+++ b/Documentation/hwmon/bcm54140.rst
@@ -0,0 +1,45 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Broadcom BCM54140 Quad SGMII/QSGMII PHY
+=======================================
+
+Supported chips:
+
+ * Broadcom BCM54140
+
+ Datasheet: not public
+
+Author: Michael Walle <michael@walle.cc>
+
+Description
+-----------
+
+The Broadcom BCM54140 is a Quad SGMII/QSGMII PHY which supports monitoring
+its die temperature as well as two analog voltages.
+
+The AVDDL is a 1.0V analogue voltage, the AVDDH is a 3.3V analogue voltage.
+Both voltages and the temperature are measured in a round-robin fashion.
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= ========================================================
+in0_label "AVDDL"
+in0_input Measured AVDDL voltage.
+in0_min Minimum AVDDL voltage.
+in0_max Maximum AVDDL voltage.
+in0_alarm AVDDL voltage alarm.
+
+in1_label "AVDDH"
+in1_input Measured AVDDH voltage.
+in1_min Minimum AVDDH voltage.
+in1_max Maximum AVDDH voltage.
+in1_alarm AVDDH voltage alarm.
+
+temp1_input Die temperature.
+temp1_min Minimum die temperature.
+temp1_max Maximum die temperature.
+temp1_alarm Die temperature alarm.
+======================= ========================================================
diff --git a/Documentation/hwmon/bel-pfe.rst b/Documentation/hwmon/bel-pfe.rst
new file mode 100644
index 000000000..4b4a7d678
--- /dev/null
+++ b/Documentation/hwmon/bel-pfe.rst
@@ -0,0 +1,112 @@
+Kernel driver bel-pfe
+======================
+
+Supported chips:
+
+ * BEL PFE1100
+
+ Prefixes: 'pfe1100'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-pfe1100-12-054xa.pdf
+
+ * BEL PFE3000
+
+ Prefixes: 'pfe3000'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-pfe3000-series.pdf
+
+Author: Tao Ren <rentao.bupt@gmail.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for below power supply devices
+which support PMBus Protocol:
+
+ * BEL PFE1100
+
+ 1100 Watt AC to DC power-factor-corrected (PFC) power supply.
+ PMBus Communication Manual is not publicly available.
+
+ * BEL PFE3000
+
+ 3000 Watt AC/DC power-factor-corrected (PFC) and DC-DC power supply.
+ PMBus Communication Manual is not publicly available.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+Example: the following will load the driver for an PFE3000 at address 0x20
+on I2C bus #1::
+
+ $ modprobe bel-pfe
+ $ echo pfe3000 0x20 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+======================= =======================================================
+curr1_label "iin"
+curr1_input Measured input current
+curr1_max Input current max value
+curr1_max_alarm Input current max alarm
+
+curr[2-3]_label "iout[1-2]"
+curr[2-3]_input Measured output current
+curr[2-3]_max Output current max value
+curr[2-3]_max_alarm Output current max alarm
+
+fan[1-2]_input Fan 1 and 2 speed in RPM
+fan1_target Set fan speed reference for both fans
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_crit Input voltage critical max value
+in1_crit_alarm Input voltage critical max alarm
+in1_lcrit Input voltage critical min value
+in1_lcrit_alarm Input voltage critical min alarm
+in1_max Input voltage max value
+in1_max_alarm Input voltage max alarm
+
+in2_label "vcap"
+in2_input Hold up capacitor voltage
+
+in[3-8]_label "vout[1-3,5-7]"
+in[3-8]_input Measured output voltage
+in[3-4]_alarm vout[1-2] output voltage alarm
+
+power[1-2]_label "pin[1-2]"
+power[1-2]_input Measured input power
+power[1-2]_alarm Input power high alarm
+
+power[3-4]_label "pout[1-2]"
+power[3-4]_input Measured output power
+
+temp[1-3]_input Measured temperature
+temp[1-3]_alarm Temperature alarm
+======================= =======================================================
+
+.. note::
+
+ - curr3, fan2, vout[2-7], vcap, pin2, pout2 and temp3 attributes only
+ exist for PFE3000.
diff --git a/Documentation/hwmon/bpa-rs600.rst b/Documentation/hwmon/bpa-rs600.rst
new file mode 100644
index 000000000..28313995d
--- /dev/null
+++ b/Documentation/hwmon/bpa-rs600.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver bpa-rs600
+=======================
+
+Supported chips:
+
+ * BPA-RS600-120
+
+ Datasheet: Publicly available at the BluTek website
+ http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf
+
+Authors:
+ - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+Description
+-----------
+
+The BPA-RS600 is a compact 600W removable power supply module.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Sysfs attributes
+----------------
+
+======================= ============================================
+curr1_label "iin"
+curr1_input Measured input current
+curr1_max Maximum input current
+curr1_max_alarm Input current high alarm
+
+curr2_label "iout1"
+curr2_input Measured output current
+curr2_max Maximum output current
+curr2_max_alarm Output current high alarm
+
+fan1_input Measured fan speed
+fan1_alarm Fan warning
+fan1_fault Fan fault
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_max Maximum input voltage
+in1_max_alarm Input voltage high alarm
+in1_min Minimum input voltage
+in1_min_alarm Input voltage low alarm
+
+in2_label "vout1"
+in2_input Measured output voltage
+in2_max Maximum output voltage
+in2_max_alarm Output voltage high alarm
+in2_min Maximum output voltage
+in2_min_alarm Output voltage low alarm
+
+power1_label "pin"
+power1_input Measured input power
+power1_alarm Input power alarm
+power1_max Maximum input power
+
+power2_label "pout1"
+power2_input Measured output power
+power2_max Maximum output power
+power2_max_alarm Output power high alarm
+
+temp1_input Measured temperature around input connector
+temp1_alarm Temperature alarm
+
+temp2_input Measured temperature around output connector
+temp2_alarm Temperature alarm
+======================= ============================================
diff --git a/Documentation/hwmon/bt1-pvt.rst b/Documentation/hwmon/bt1-pvt.rst
new file mode 100644
index 000000000..cbb0c0613
--- /dev/null
+++ b/Documentation/hwmon/bt1-pvt.rst
@@ -0,0 +1,117 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver bt1-pvt
+=====================
+
+Supported chips:
+
+ * Baikal-T1 PVT sensor (in SoC)
+
+ Prefix: 'bt1-pvt'
+
+ Addresses scanned: -
+
+ Datasheet: Provided by BAIKAL ELECTRONICS upon request and under NDA
+
+Authors:
+ Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
+ Serge Semin <Sergey.Semin@baikalelectronics.ru>
+
+Description
+-----------
+
+This driver implements support for the hardware monitoring capabilities of the
+embedded into Baikal-T1 process, voltage and temperature sensors. PVT IP-core
+consists of one temperature and four voltage sensors, which can be used to
+monitor the chip internal environment like heating, supply voltage and
+transistors performance. The driver can optionally provide the hwmon alarms
+for each sensor the PVT controller supports. The alarms functionality is made
+compile-time configurable due to the hardware interface implementation
+peculiarity, which is connected with an ability to convert data from only one
+sensor at a time. Additional limitation is that the controller performs the
+thresholds checking synchronously with the data conversion procedure. Due to
+these in order to have the hwmon alarms automatically detected the driver code
+must switch from one sensor to another, read converted data and manually check
+the threshold status bits. Depending on the measurements timeout settings
+(update_interval sysfs node value) this design may cause additional burden on
+the system performance. So in case if alarms are unnecessary in your system
+design it's recommended to have them disabled to prevent the PVT IRQs being
+periodically raised to get the data cache/alarms status up to date. By default
+in alarm-less configuration the data conversion is performed by the driver
+on demand when read operation is requested via corresponding _input-file.
+
+Temperature Monitoring
+----------------------
+
+Temperature is measured with 10-bit resolution and reported in millidegree
+Celsius. The driver performs all the scaling by itself therefore reports true
+temperatures that don't need any user-space adjustments. While the data
+translation formulae isn't linear, which gives us non-linear discreteness,
+it's close to one, but giving a bit better accuracy for higher temperatures.
+The temperature input is mapped as follows (the last column indicates the input
+ranges)::
+
+ temp1: CPU embedded diode -48.38C - +147.438C
+
+In case if the alarms kernel config is enabled in the driver the temperature input
+has associated min and max limits which trigger an alarm when crossed.
+
+Voltage Monitoring
+------------------
+
+The voltage inputs are also sampled with 10-bit resolution and reported in
+millivolts. But in this case the data translation formulae is linear, which
+provides a constant measurements discreteness. The data scaling is also
+performed by the driver, so returning true millivolts. The voltage inputs are
+mapped as follows (the last column indicates the input ranges)::
+
+ in0: VDD (processor core) 0.62V - 1.168V
+ in1: Low-Vt (low voltage threshold) 0.62V - 1.168V
+ in2: High-Vt (high voltage threshold) 0.62V - 1.168V
+ in3: Standard-Vt (standard voltage threshold) 0.62V - 1.168V
+
+In case if the alarms config is enabled in the driver the voltage inputs
+have associated min and max limits which trigger an alarm when crossed.
+
+Sysfs Attributes
+----------------
+
+Following is a list of all sysfs attributes that the driver provides, their
+permissions and a short description:
+
+=============================== ======= =======================================
+Name Perm Description
+=============================== ======= =======================================
+update_interval RW Measurements update interval per
+ sensor.
+temp1_type RO Sensor type (always 1 as CPU embedded
+ diode).
+temp1_label RO CPU Core Temperature sensor.
+temp1_input RO Measured temperature in millidegree
+ Celsius.
+temp1_min RW Low limit for temp input.
+temp1_max RW High limit for temp input.
+temp1_min_alarm RO Temperature input alarm. Returns 1 if
+ temperature input went below min limit,
+ 0 otherwise.
+temp1_max_alarm RO Temperature input alarm. Returns 1 if
+ temperature input went above max limit,
+ 0 otherwise.
+temp1_offset RW Temperature offset in millidegree
+ Celsius which is added to the
+ temperature reading by the chip. It can
+ be used to manually adjust the
+ temperature measurements within 7.130
+ degrees Celsius.
+in[0-3]_label RO CPU Voltage sensor (either core or
+ low/high/standard thresholds).
+in[0-3]_input RO Measured voltage in millivolts.
+in[0-3]_min RW Low limit for voltage input.
+in[0-3]_max RW High limit for voltage input.
+in[0-3]_min_alarm RO Voltage input alarm. Returns 1 if
+ voltage input went below min limit,
+ 0 otherwise.
+in[0-3]_max_alarm RO Voltage input alarm. Returns 1 if
+ voltage input went above max limit,
+ 0 otherwise.
+=============================== ======= =======================================
diff --git a/Documentation/hwmon/coretemp.rst b/Documentation/hwmon/coretemp.rst
new file mode 100644
index 000000000..c609329e3
--- /dev/null
+++ b/Documentation/hwmon/coretemp.rst
@@ -0,0 +1,195 @@
+Kernel driver coretemp
+======================
+
+Supported chips:
+ * All Intel Core family
+
+ Prefix: 'coretemp'
+
+ CPUID: family 0x6, models
+
+ - 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
+ - 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
+ - 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
+ - 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
+ - 0x36 (Cedar Trail Atom)
+
+ Datasheet:
+
+ Intel 64 and IA-32 Architectures Software Developer's Manual
+ Volume 3A: System Programming Guide
+
+ http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
+
+Author: Rudolf Marek
+
+Description
+-----------
+
+This driver permits reading the DTS (Digital Temperature Sensor) embedded
+inside Intel CPUs. This driver can read both the per-core and per-package
+temperature using the appropriate sensors. The per-package sensor is new;
+as of now, it is present only in the SandyBridge platform. The driver will
+show the temperature of all cores inside a package under a single device
+directory inside hwmon.
+
+Temperature is measured in degrees Celsius and measurement resolution is
+1 degree C. Valid temperatures are from 0 to TjMax degrees C, because
+the actual value of temperature register is in fact a delta from TjMax.
+
+Temperature known as TjMax is the maximum junction temperature of processor,
+which depends on the CPU model. See table below. At this temperature, protection
+mechanism will perform actions to forcibly cool down the processor. Alarm
+may be raised, if the temperature grows enough (more than TjMax) to trigger
+the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
+
+All Sysfs entries are named with their core_id (represented here by 'X').
+
+================= ========================================================
+tempX_input Core temperature (in millidegrees Celsius).
+tempX_max All cooling devices should be turned on (on Core2).
+tempX_crit Maximum junction temperature (in millidegrees Celsius).
+tempX_crit_alarm Set when Out-of-spec bit is set, never clears.
+ Correct CPU operation is no longer guaranteed.
+tempX_label Contains string "Core X", where X is processor
+ number. For Package temp, this will be "Physical id Y",
+ where Y is the package number.
+================= ========================================================
+
+On CPU models which support it, TjMax is read from a model-specific register.
+On other models, it is set to an arbitrary value based on weak heuristics.
+If these heuristics don't work for you, you can pass the correct TjMax value
+as a module parameter (tjmax).
+
+Appendix A. Known TjMax lists (TBD):
+Some information comes from ark.intel.com
+
+=============== =============================================== ================
+Process Processor TjMax(C)
+
+22nm Core i5/i7 Processors
+ i7 3920XM, 3820QM, 3720QM, 3667U, 3520M 105
+ i5 3427U, 3360M/3320M 105
+ i7 3770/3770K 105
+ i5 3570/3570K, 3550, 3470/3450 105
+ i7 3770S 103
+ i5 3570S/3550S, 3475S/3470S/3450S 103
+ i7 3770T 94
+ i5 3570T 94
+ i5 3470T 91
+
+32nm Core i3/i5/i7 Processors
+ i7 2600 98
+ i7 660UM/640/620, 640LM/620, 620M, 610E 105
+ i5 540UM/520/430, 540M/520/450/430 105
+ i3 330E, 370M/350/330 90 rPGA, 105 BGA
+ i3 330UM 105
+
+32nm Core i7 Extreme Processors
+ 980X 100
+
+32nm Celeron Processors
+ U3400 105
+ P4505/P4500 90
+
+32nm Atom Processors
+ S1260/1220 95
+ S1240 102
+ Z2460 90
+ Z2760 90
+ D2700/2550/2500 100
+ N2850/2800/2650/2600 100
+
+45nm Xeon Processors 5400 Quad-Core
+ X5492, X5482, X5472, X5470, X5460, X5450 85
+ E5472, E5462, E5450/40/30/20/10/05 85
+ L5408 95
+ L5430, L5420, L5410 70
+
+45nm Xeon Processors 5200 Dual-Core
+ X5282, X5272, X5270, X5260 90
+ E5240 90
+ E5205, E5220 70, 90
+ L5240 70
+ L5238, L5215 95
+
+45nm Atom Processors
+ D525/510/425/410 100
+ K525/510/425/410 100
+ Z670/650 90
+ Z560/550/540/530P/530/520PT/520/515/510PT/510P 90
+ Z510/500 90
+ N570/550 100
+ N475/470/455/450 100
+ N280/270 90
+ 330/230 125
+ E680/660/640/620 90
+ E680T/660T/640T/620T 110
+ E665C/645C 90
+ E665CT/645CT 110
+ CE4170/4150/4110 110
+ CE4200 series unknown
+ CE5300 series unknown
+
+45nm Core2 Processors
+ Solo ULV SU3500/3300 100
+ T9900/9800/9600/9550/9500/9400/9300/8300/8100 105
+ T6670/6500/6400 105
+ T6600 90
+ SU9600/9400/9300 105
+ SP9600/9400 105
+ SL9600/9400/9380/9300 105
+ P9700/9600/9500/8800/8700/8600/8400/7570 105
+ P7550/7450 90
+
+45nm Core2 Quad Processors
+ Q9100/9000 100
+
+45nm Core2 Extreme Processors
+ X9100/9000 105
+ QX9300 100
+
+45nm Core i3/i5/i7 Processors
+ i7 940XM/920 100
+ i7 840QM/820/740/720 100
+
+45nm Celeron Processors
+ SU2300 100
+ 900 105
+
+65nm Core2 Duo Processors
+ Solo U2200, U2100 100
+ U7700/7600/7500 100
+ T7800/7700/7600/7500/7400/7300/7250/7200/7100 100
+ T5870/5670/5600/5550/5500/5470/5450/5300/5270 100
+ T5250 100
+ T5800/5750/5200 85
+ L7700/7500/7400/7300/7200 100
+
+65nm Core2 Extreme Processors
+ X7900/7800 100
+
+65nm Core Duo Processors
+ U2500/2400 100
+ T2700/2600/2450/2400/2350/2300E/2300/2250/2050 100
+ L2500/2400/2300 100
+
+65nm Core Solo Processors
+ U1500/1400/1300 100
+ T1400/1350/1300/1250 100
+
+65nm Xeon Processors 5000 Quad-Core
+ X5000 90-95
+ E5000 80
+ L5000 70
+ L5318 95
+
+65nm Xeon Processors 5000 Dual-Core
+ 5080, 5063, 5060, 5050, 5030 80-90
+ 5160, 5150, 5148, 5140, 5130, 5120, 5110 80
+ L5138 100
+
+65nm Celeron Processors
+ T1700/1600 100
+ 560/550/540/530 100
+=============== =============================================== ================
diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst
new file mode 100644
index 000000000..751f95476
--- /dev/null
+++ b/Documentation/hwmon/corsair-cpro.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver corsair-cpro
+==========================
+
+Supported devices:
+
+ * Corsair Commander Pro
+ * Corsair Commander Pro (1000D)
+
+Author: Marius Zachmann
+
+Description
+-----------
+
+This driver implements the sysfs interface for the Corsair Commander Pro.
+The Corsair Commander Pro is a USB device with 6 fan connectors,
+4 temperature sensor connectors and 2 Corsair LED connectors.
+It can read the voltage levels on the SATA power connector.
+
+Usage Notes
+-----------
+
+Since it is a USB device, hotswapping is possible. The device is autodetected.
+
+Sysfs entries
+-------------
+
+======================= =====================================================================
+in0_input Voltage on SATA 12v
+in1_input Voltage on SATA 5v
+in2_input Voltage on SATA 3.3v
+temp[1-4]_input Temperature on connected temperature sensors
+fan[1-6]_input Connected fan rpm.
+fan[1-6]_label Shows fan type as detected by the device.
+fan[1-6]_target Sets fan speed target rpm.
+ When reading, it reports the last value if it was set by the driver.
+ Otherwise returns an error.
+pwm[1-6] Sets the fan speed. Values from 0-255. Can only be read if pwm
+ was set directly.
+======================= =====================================================================
diff --git a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst
new file mode 100644
index 000000000..6a03edb55
--- /dev/null
+++ b/Documentation/hwmon/corsair-psu.rst
@@ -0,0 +1,96 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver corsair-psu
+=========================
+
+Supported devices:
+
+* Corsair Power Supplies
+
+ Corsair HX550i
+
+ Corsair HX650i
+
+ Corsair HX750i
+
+ Corsair HX850i
+
+ Corsair HX1000i (revision 1 and 2)
+
+ Corsair HX1200i
+
+ Corsair HX1500i
+
+ Corsair RM550i
+
+ Corsair RM650i
+
+ Corsair RM750i
+
+ Corsair RM850i
+
+ Corsair RM1000i
+
+Author: Wilken Gottwalt
+
+Description
+-----------
+
+This driver implements the sysfs interface for the Corsair PSUs with a HID protocol
+interface of the HXi and RMi series.
+These power supplies provide access to a micro-controller with 2 attached
+temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for
+power usage and 4 sensors for current levels and addtional non-sensor information
+like uptimes.
+
+Sysfs entries
+-------------
+
+======================= ========================================================
+curr1_input Total current usage
+curr2_input Current on the 12v psu rail
+curr2_crit Current max critical value on the 12v psu rail
+curr3_input Current on the 5v psu rail
+curr3_crit Current max critical value on the 5v psu rail
+curr4_input Current on the 3.3v psu rail
+curr4_crit Current max critical value on the 3.3v psu rail
+fan1_input RPM of psu fan
+in0_input Voltage of the psu ac input
+in1_input Voltage of the 12v psu rail
+in1_crit Voltage max critical value on the 12v psu rail
+in1_lcrit Voltage min critical value on the 12v psu rail
+in2_input Voltage of the 5v psu rail
+in2_crit Voltage max critical value on the 5v psu rail
+in2_lcrit Voltage min critical value on the 5v psu rail
+in3_input Voltage of the 3.3v psu rail
+in3_crit Voltage max critical value on the 3.3v psu rail
+in3_lcrit Voltage min critical value on the 3.3v psu rail
+power1_input Total power usage
+power2_input Power usage of the 12v psu rail
+power3_input Power usage of the 5v psu rail
+power4_input Power usage of the 3.3v psu rail
+temp1_input Temperature of the psu vrm component
+temp1_crit Temperature max cirtical value of the psu vrm component
+temp2_input Temperature of the psu case
+temp2_crit Temperature max critical value of psu case
+======================= ========================================================
+
+Usage Notes
+-----------
+
+It is an USB HID device, so it is auto-detected and supports hot-swapping.
+
+Flickering values in the rail voltage levels can be an indicator for a failing
+PSU. The driver also provides some additional useful values via debugfs, which
+do not fit into the hwmon class.
+
+Debugfs entries
+---------------
+
+======================= ========================================================
+ocpmode Single or multi rail mode of the PCIe power connectors
+product Product name of the psu
+uptime Session uptime of the psu
+uptime_total Total uptime of the psu
+vendor Vendor name of the psu
+======================= ========================================================
diff --git a/Documentation/hwmon/da9052.rst b/Documentation/hwmon/da9052.rst
new file mode 100644
index 000000000..c1c0f1f08
--- /dev/null
+++ b/Documentation/hwmon/da9052.rst
@@ -0,0 +1,78 @@
+Kernel driver da9052
+====================
+
+Supported chips:
+
+ * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs
+
+ Prefix: 'da9052'
+
+ Datasheet: Datasheet is not publicly available.
+
+Authors: David Dajun Chen <dchen@diasemi.com>
+
+Description
+-----------
+
+The DA9052/53 provides an Analogue to Digital Converter (ADC) with 10 bits
+resolution and track and hold circuitry combined with an analogue input
+multiplexer. The analogue input multiplexer will allow conversion of up to 10
+different inputs. The track and hold circuit ensures stable input voltages at
+the input of the ADC during the conversion.
+
+The ADC is used to measure the following inputs:
+
+========= ===================================================================
+Channel 0 VDDOUT - measurement of the system voltage
+Channel 1 ICH - internal battery charger current measurement
+Channel 2 TBAT - output from the battery NTC
+Channel 3 VBAT - measurement of the battery voltage
+Channel 4 ADC_IN4 - high impedance input (0 - 2.5V)
+Channel 5 ADC_IN5 - high impedance input (0 - 2.5V)
+Channel 6 ADC_IN6 - high impedance input (0 - 2.5V)
+Channel 7 XY - TSI interface to measure the X and Y voltage of the touch
+ screen resistive potentiometers
+Channel 8 Internal Tjunc. - sense (internal temp. sensor)
+Channel 9 VBBAT - measurement of the backup battery voltage
+========= ===================================================================
+
+By using sysfs attributes we can measure the system voltage VDDOUT, the battery
+charging current ICH, battery temperature TBAT, battery junction temperature
+TJUNC, battery voltage VBAT and the back up battery voltage VBBAT.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 10 bit ADC.
+
+The battery voltage is calculated as:
+
+ Milli volt = ((ADC value * 1000) / 512) + 2500
+
+The backup battery voltage is calculated as:
+
+ Milli volt = (ADC value * 2500) / 512;
+
+The voltages on ADC channels 4, 5 and 6 are calculated as:
+
+ Milli volt = (ADC value * 2500) / 1023
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures
+are monitored by the ADC channels.
+
+The junction temperature is calculated:
+
+ Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8
+
+The junction temperature attribute is supported by the driver.
+
+The battery temperature is calculated:
+
+ Degree Celsius = 1 / (t1 + 1/298) - 273
+
+where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255))
+
+Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively.
diff --git a/Documentation/hwmon/da9055.rst b/Documentation/hwmon/da9055.rst
new file mode 100644
index 000000000..beae271a3
--- /dev/null
+++ b/Documentation/hwmon/da9055.rst
@@ -0,0 +1,57 @@
+Kernel driver da9055
+====================
+
+Supported chips:
+ * Dialog Semiconductors DA9055 PMIC
+
+ Prefix: 'da9055'
+
+ Datasheet: Datasheet is not publicly available.
+
+Authors: David Dajun Chen <dchen@diasemi.com>
+
+Description
+-----------
+
+The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits
+resolution and track and hold circuitry combined with an analogue input
+multiplexer. The analogue input multiplexer will allow conversion of up to 5
+different inputs. The track and hold circuit ensures stable input voltages at
+the input of the ADC during the conversion.
+
+The ADC is used to measure the following inputs:
+
+- Channel 0: VDDOUT - measurement of the system voltage
+- Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
+- Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
+- Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
+- Channel 4: Internal Tjunc. - sense (internal temp. sensor)
+
+By using sysfs attributes we can measure the system voltage VDDOUT,
+chip junction temperature and auxiliary channels voltages.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled in a AUTO mode it can be manually sampled too and results
+are stored in a 10 bit ADC.
+
+The system voltage is calculated as:
+
+ Milli volt = ((ADC value * 1000) / 85) + 2500
+
+The voltages on ADC channels 1, 2 and 3 are calculated as:
+
+ Milli volt = (ADC value * 1000) / 102
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 10 bit ADC. Junction temperatures
+are monitored by the ADC channels.
+
+The junction temperature is calculated:
+
+ Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
+
+The junction temperature attribute is supported by the driver.
diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst
new file mode 100644
index 000000000..d8f1d6859
--- /dev/null
+++ b/Documentation/hwmon/dell-smm-hwmon.rst
@@ -0,0 +1,359 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+.. include:: <isonum.txt>
+
+Kernel driver dell-smm-hwmon
+============================
+
+:Copyright: |copy| 2002-2005 Massimo Dal Zotto <dz@debian.org>
+:Copyright: |copy| 2019 Giovanni Mascellani <gio@debian.org>
+
+Description
+-----------
+
+On many Dell laptops the System Management Mode (SMM) BIOS can be
+queried for the status of fans and temperature sensors. Userspace
+utilities like ``sensors`` can be used to return the readings. The
+userspace suite `i8kutils`__ can also be used to read the sensors and
+automatically adjust fan speed (please notice that it currently uses
+the deprecated ``/proc/i8k`` interface).
+
+ __ https://github.com/vitorafsr/i8kutils
+
+``sysfs`` interface
+-------------------
+
+Temperature sensors and fans can be queried and set via the standard
+``hwmon`` interface on ``sysfs``, under the directory
+``/sys/class/hwmon/hwmonX`` for some value of ``X`` (search for the
+``X`` such that ``/sys/class/hwmon/hwmonX/name`` has content
+``dell_smm``). A number of other attributes can be read or written:
+
+=============================== ======= =======================================
+Name Perm Description
+=============================== ======= =======================================
+fan[1-3]_input RO Fan speed in RPM.
+fan[1-3]_label RO Fan label.
+fan[1-3]_min RO Minimal Fan speed in RPM
+fan[1-3]_max RO Maximal Fan speed in RPM
+fan[1-3]_target RO Expected Fan speed in RPM
+pwm[1-3] RW Control the fan PWM duty-cycle.
+pwm1_enable WO Enable or disable automatic BIOS fan
+ control (not supported on all laptops,
+ see below for details).
+temp[1-10]_input RO Temperature reading in milli-degrees
+ Celsius.
+temp[1-10]_label RO Temperature sensor label.
+=============================== ======= =======================================
+
+Due to the nature of the SMM interface, each pwmX attribute controls
+fan number X.
+
+Disabling automatic BIOS fan control
+------------------------------------
+
+On some laptops the BIOS automatically sets fan speed every few
+seconds. Therefore the fan speed set by mean of this driver is quickly
+overwritten.
+
+There is experimental support for disabling automatic BIOS fan
+control, at least on laptops where the corresponding SMM command is
+known, by writing the value ``1`` in the attribute ``pwm1_enable``
+(writing ``2`` enables automatic BIOS control again). Even if you have
+more than one fan, all of them are set to either enabled or disabled
+automatic fan control at the same time and, notwithstanding the name,
+``pwm1_enable`` sets automatic control for all fans.
+
+If ``pwm1_enable`` is not available, then it means that SMM codes for
+enabling and disabling automatic BIOS fan control are not whitelisted
+for your hardware. It is possible that codes that work for other
+laptops actually work for yours as well, or that you have to discover
+new codes.
+
+Check the list ``i8k_whitelist_fan_control`` in file
+``drivers/hwmon/dell-smm-hwmon.c`` in the kernel tree: as a first
+attempt you can try to add your machine and use an already-known code
+pair. If, after recompiling the kernel, you see that ``pwm1_enable``
+is present and works (i.e., you can manually control the fan speed),
+then please submit your finding as a kernel patch, so that other users
+can benefit from it. Please see
+:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+for information on submitting patches.
+
+If no known code works on your machine, you need to resort to do some
+probing, because unfortunately Dell does not publish datasheets for
+its SMM. You can experiment with the code in `this repository`__ to
+probe the BIOS on your machine and discover the appropriate codes.
+
+ __ https://github.com/clopez/dellfan/
+
+Again, when you find new codes, we'd be happy to have your patches!
+
+``thermal`` interface
+---------------------------
+
+The driver also exports the fans as thermal cooling devices with
+``type`` set to ``dell-smm-fan[1-3]``. This allows for easy fan control
+using one of the thermal governors.
+
+Module parameters
+-----------------
+
+* force:bool
+ Force loading without checking for supported
+ models. (default: 0)
+
+* ignore_dmi:bool
+ Continue probing hardware even if DMI data does not
+ match. (default: 0)
+
+* restricted:bool
+ Allow fan control only to processes with the
+ ``CAP_SYS_ADMIN`` capability set or processes run
+ as root when using the legacy ``/proc/i8k``
+ interface. In this case normal users will be able
+ to read temperature and fan status but not to
+ control the fan. If your notebook is shared with
+ other users and you don't trust them you may want
+ to use this option. (default: 1, only available
+ with ``CONFIG_I8K``)
+
+* power_status:bool
+ Report AC status in ``/proc/i8k``. (default: 0,
+ only available with ``CONFIG_I8K``)
+
+* fan_mult:uint
+ Factor to multiply fan speed with. (default:
+ autodetect)
+
+* fan_max:uint
+ Maximum configurable fan speed. (default:
+ autodetect)
+
+Legacy ``/proc`` interface
+--------------------------
+
+.. warning:: This interface is obsolete and deprecated and should not
+ used in new applications. This interface is only
+ available when kernel is compiled with option
+ ``CONFIG_I8K``.
+
+The information provided by the kernel driver can be accessed by
+simply reading the ``/proc/i8k`` file. For example::
+
+ $ cat /proc/i8k
+ 1.0 A17 2J59L02 52 2 1 8040 6420 1 2
+
+The fields read from ``/proc/i8k`` are::
+
+ 1.0 A17 2J59L02 52 2 1 8040 6420 1 2
+ | | | | | | | | | |
+ | | | | | | | | | +------- 10. buttons status
+ | | | | | | | | +--------- 9. AC status
+ | | | | | | | +-------------- 8. fan0 RPM
+ | | | | | | +------------------- 7. fan1 RPM
+ | | | | | +--------------------- 6. fan0 status
+ | | | | +----------------------- 5. fan1 status
+ | | | +-------------------------- 4. temp0 reading (Celsius)
+ | | +---------------------------------- 3. Dell service tag (later known as 'serial number')
+ | +-------------------------------------- 2. BIOS version
+ +------------------------------------------ 1. /proc/i8k format version
+
+A negative value, for example -22, indicates that the BIOS doesn't
+return the corresponding information. This is normal on some
+models/BIOSes.
+
+For performance reasons the ``/proc/i8k`` doesn't report by default
+the AC status since this SMM call takes a long time to execute and is
+not really needed. If you want to see the ac status in ``/proc/i8k``
+you must explictitly enable this option by passing the
+``power_status=1`` parameter to insmod. If AC status is not
+available -1 is printed instead.
+
+The driver provides also an ioctl interface which can be used to
+obtain the same information and to control the fan status. The ioctl
+interface can be accessed from C programs or from shell using the
+i8kctl utility. See the source file of ``i8kutils`` for more
+information on how to use the ioctl interface.
+
+SMM Interface
+-------------
+
+.. warning:: The SMM interface was reverse-engineered by trial-and-error
+ since Dell did not provide any Documentation,
+ please keep that in mind.
+
+The driver uses the SMM interface to send commands to the system BIOS.
+This interface is normally used by Dell's 32-bit diagnostic program or
+on newer notebook models by the buildin BIOS diagnostics.
+The SMM is triggered by writing to the special ioports ``0xb2`` and ``0x84``,
+and may cause short hangs when the BIOS code is taking too long to
+execute.
+
+The SMM handler inside the system BIOS looks at the contents of the
+``eax``, ``ebx``, ``ecx``, ``edx``, ``esi`` and ``edi`` registers.
+Each register has a special purpose:
+
+=============== ==================================
+Register Purpose
+=============== ==================================
+eax Holds the command code before SMM,
+ holds the first result after SMM.
+ebx Holds the arguments.
+ecx Unknown, set to 0.
+edx Holds the second result after SMM.
+esi Unknown, set to 0.
+edi Unknown, set to 0.
+=============== ==================================
+
+The SMM handler can signal a failure by either:
+
+- setting the lower sixteen bits of ``eax`` to ``0xffff``
+- not modifying ``eax`` at all
+- setting the carry flag
+
+SMM command codes
+-----------------
+
+=============== ======================= ================================================
+Command Code Command Name Description
+=============== ======================= ================================================
+``0x0025`` Get Fn key status Returns the Fn key pressed after SMM:
+
+ - 9th bit in ``eax`` indicates Volume up
+ - 10th bit in ``eax`` indicates Volume down
+ - both bits indicate Volume mute
+
+``0xa069`` Get power status Returns current power status after SMM:
+
+ - 1st bit in ``eax`` indicates Battery connected
+ - 3th bit in ``eax`` indicates AC connected
+
+``0x00a3`` Get fan state Returns current fan state after SMM:
+
+ - 1st byte in ``eax`` holds the current
+ fan state (0 - 2 or 3)
+
+``0x01a3`` Set fan state Sets the fan speed:
+
+ - 1st byte in ``ebx`` holds the fan number
+ - 2nd byte in ``ebx`` holds the desired
+ fan state (0 - 2 or 3)
+
+``0x02a3`` Get fan speed Returns the current fan speed in RPM:
+
+ - 1st byte in ``ebx`` holds the fan number
+ - 1st word in ``eax`` holds the current
+ fan speed in RPM (after SMM)
+
+``0x03a3`` Get fan type Returns the fan type:
+
+ - 1st byte in ``ebx`` holds the fan number
+ - 1st byte in ``eax`` holds the
+ fan type (after SMM):
+
+ - 5th bit indicates docking fan
+ - 1 indicates Processor fan
+ - 2 indicates Motherboard fan
+ - 3 indicates Video fan
+ - 4 indicates Power supply fan
+ - 5 indicates Chipset fan
+ - 6 indicates other fan type
+
+``0x04a3`` Get nominal fan speed Returns the nominal RPM in each fan state:
+
+ - 1st byte in ``ebx`` holds the fan number
+ - 2nd byte in ``ebx`` holds the fan state
+ in question (0 - 2 or 3)
+ - 1st word in ``eax`` holds the nominal
+ fan speed in RPM (after SMM)
+
+``0x05a3`` Get fan speed tolerance Returns the speed tolerance for each fan state:
+
+ - 1st byte in ``ebx`` holds the fan number
+ - 2nd byte in ``ebx`` holds the fan state
+ in question (0 - 2 or 3)
+ - 1st byte in ``eax`` returns the speed
+ tolerance
+
+``0x10a3`` Get sensor temperature Returns the measured temperature:
+
+ - 1st byte in ``ebx`` holds the sensor number
+ - 1st byte in ``eax`` holds the measured
+ temperature (after SMM)
+
+``0x11a3`` Get sensor type Returns the sensor type:
+
+ - 1st byte in ``ebx`` holds the sensor number
+ - 1st byte in ``eax`` holds the
+ temperature type (after SMM):
+
+ - 1 indicates CPU sensor
+ - 2 indicates GPU sensor
+ - 3 indicates SODIMM sensor
+ - 4 indicates other sensor type
+ - 5 indicates Ambient sensor
+ - 6 indicates other sensor type
+
+``0xfea3`` Get SMM signature Returns Dell signature if interface
+ is supported (after SMM):
+
+ - ``eax`` holds 1145651527
+ (0x44494147 or "DIAG")
+ - ``edx`` holds 1145392204
+ (0x44454c4c or "DELL")
+
+``0xffa3`` Get SMM signature Same as ``0xfea3``, check both.
+=============== ======================= ================================================
+
+There are additional commands for enabling (``0x31a3`` or ``0x35a3``) and
+disabling (``0x30a3`` or ``0x34a3``) automatic fan speed control.
+The commands are however causing severe sideeffects on many machines, so
+they are not used by default.
+
+On several machines (Inspiron 3505, Precision 490, Vostro 1720, ...), the
+fans supports a 4th "magic" state, which signals the BIOS that automatic
+fan control should be enabled for a specific fan.
+However there are also some machines who do support a 4th regular fan state too,
+but in case of the "magic" state, the nominal RPM reported for this state is a
+placeholder value, which however is not always detectable.
+
+Firmware Bugs
+-------------
+
+The SMM calls can behave erratic on some machines:
+
+======================================================= =================
+Firmware Bug Affected Machines
+======================================================= =================
+Reading of fan states return spurious errors. Precision 490
+
+Reading of fan types causes erratic fan behaviour. Studio XPS 8000
+
+ Studio XPS 8100
+
+ Inspiron 580
+
+ Inspiron 3505
+
+Fan-related SMM calls take too long (about 500ms). Inspiron 7720
+
+ Vostro 3360
+
+ XPS 13 9333
+
+ XPS 15 L502X
+======================================================= =================
+
+In case you experience similar issues on your Dell machine, please
+submit a bugreport on bugzilla to we can apply workarounds.
+
+Limitations
+-----------
+
+The SMM calls can take too long to execute on some machines, causing
+short hangs and/or audio glitches.
+Also the fan state needs to be restored after suspend, as well as
+the automatic mode settings.
+When reading a temperature sensor, values above 127 degrees indicate
+a BIOS read error or a deactivated sensor.
diff --git a/Documentation/hwmon/dme1737.rst b/Documentation/hwmon/dme1737.rst
new file mode 100644
index 000000000..82fcbc6b2
--- /dev/null
+++ b/Documentation/hwmon/dme1737.rst
@@ -0,0 +1,364 @@
+Kernel driver dme1737
+=====================
+
+Supported chips:
+
+ * SMSC DME1737 and compatibles (like Asus A8000)
+
+ Prefix: 'dme1737'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: Provided by SMSC upon request and under NDA
+
+ * SMSC SCH3112, SCH3114, SCH3116
+
+ Prefix: 'sch311x'
+
+ Addresses scanned: none, address read from Super-I/O config space
+
+ Datasheet: Available on the Internet
+
+ * SMSC SCH5027
+
+ Prefix: 'sch5027'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: Provided by SMSC upon request and under NDA
+
+ * SMSC SCH5127
+
+ Prefix: 'sch5127'
+
+ Addresses scanned: none, address read from Super-I/O config space
+
+ Datasheet: Provided by SMSC upon request and under NDA
+
+Authors:
+ Juerg Haefliger <juergh@gmail.com>
+
+
+Module Parameters
+-----------------
+
+* force_start: bool
+ Enables the monitoring of voltage, fan and temp inputs
+ and PWM output control functions. Using this parameter
+ shouldn't be required since the BIOS usually takes care
+ of this.
+
+* probe_all_addr: bool
+ Include non-standard LPC addresses 0x162e and 0x164e
+ when probing for ISA devices. This is required for the
+ following boards:
+ - VIA EPIA SN18000
+
+
+Description
+-----------
+
+This driver implements support for the hardware monitoring capabilities of the
+SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
+and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
+temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
+1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
+up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
+automatically.
+
+For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present.
+Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
+the configuration of the chip. The driver will detect which features are
+present during initialization and create the sysfs attributes accordingly.
+
+For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
+fan[4-6] and pwm[5-6] don't exist.
+
+The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
+accessible via SMBus, while the SCH311x and SCH5127 only provide access via
+the ISA bus. The driver will therefore register itself as an I2C client driver
+if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it
+detects a SCH311x or SCH5127 chip.
+
+
+Voltage Monitoring
+------------------
+
+The voltage inputs are sampled with 12-bit resolution and have internal
+scaling resistors. The values returned by the driver therefore reflect true
+millivolts and don't need scaling. The voltage inputs are mapped as follows
+(the last column indicates the input ranges):
+
+DME1737, A8000::
+
+ in0: +5VTR (+5V standby) 0V - 6.64V
+ in1: Vccp (processor core) 0V - 3V
+ in2: VCC (internal +3.3V) 0V - 4.38V
+ in3: +5V 0V - 6.64V
+ in4: +12V 0V - 16V
+ in5: VTR (+3.3V standby) 0V - 4.38V
+ in6: Vbat (+3.0V) 0V - 4.38V
+
+SCH311x::
+
+ in0: +2.5V 0V - 3.32V
+ in1: Vccp (processor core) 0V - 2V
+ in2: VCC (internal +3.3V) 0V - 4.38V
+ in3: +5V 0V - 6.64V
+ in4: +12V 0V - 16V
+ in5: VTR (+3.3V standby) 0V - 4.38V
+ in6: Vbat (+3.0V) 0V - 4.38V
+
+SCH5027::
+
+ in0: +5VTR (+5V standby) 0V - 6.64V
+ in1: Vccp (processor core) 0V - 3V
+ in2: VCC (internal +3.3V) 0V - 4.38V
+ in3: V2_IN 0V - 1.5V
+ in4: V1_IN 0V - 1.5V
+ in5: VTR (+3.3V standby) 0V - 4.38V
+ in6: Vbat (+3.0V) 0V - 4.38V
+
+SCH5127::
+
+ in0: +2.5 0V - 3.32V
+ in1: Vccp (processor core) 0V - 3V
+ in2: VCC (internal +3.3V) 0V - 4.38V
+ in3: V2_IN 0V - 1.5V
+ in4: V1_IN 0V - 1.5V
+ in5: VTR (+3.3V standby) 0V - 4.38V
+ in6: Vbat (+3.0V) 0V - 4.38V
+ in7: Vtrip (+1.5V) 0V - 1.99V
+
+Each voltage input has associated min and max limits which trigger an alarm
+when crossed.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are measured with 12-bit resolution and reported in millidegree
+Celsius. The chip also features offsets for all 3 temperature inputs which -
+when programmed - get added to the input readings. The chip does all the
+scaling by itself and the driver therefore reports true temperatures that don't
+need any user-space adjustments. The temperature inputs are mapped as follows
+(the last column indicates the input ranges)::
+
+ temp1: Remote diode 1 (3904 type) temperature -127C - +127C
+ temp2: DME1737 internal temperature -127C - +127C
+ temp3: Remote diode 2 (3904 type) temperature -127C - +127C
+
+Each temperature input has associated min and max limits which trigger an alarm
+when crossed. Additionally, each temperature input has a fault attribute that
+returns 1 when a faulty diode or an unconnected input is detected and 0
+otherwise.
+
+
+Fan Monitoring
+--------------
+
+Fan RPMs are measured with 16-bit resolution. The chip provides inputs for 6
+fan tachometers. All 6 inputs have an associated min limit which triggers an
+alarm when crossed. Fan inputs 1-4 provide type attributes that need to be set
+to the number of pulses per fan revolution that the connected tachometer
+generates. Supported values are 1, 2, and 4. Fan inputs 5-6 only support fans
+that generate 2 pulses per revolution. Fan inputs 5-6 also provide a max
+attribute that needs to be set to the maximum attainable RPM (fan at 100% duty-
+cycle) of the input. The chip adjusts the sampling rate based on this value.
+
+
+PWM Output Control
+------------------
+
+This chip features 5 PWM outputs. PWM outputs 1-3 are associated with fan
+inputs 1-3 and PWM outputs 5-6 are associated with fan inputs 5-6. PWM outputs
+1-3 can be configured to operate either in manual or automatic mode by setting
+the appropriate enable attribute accordingly. PWM outputs 5-6 can only operate
+in manual mode, their enable attributes are therefore read-only. When set to
+manual mode, the fan speed is set by writing the duty-cycle value to the
+appropriate PWM attribute. In automatic mode, the PWM attribute returns the
+current duty-cycle as set by the fan controller in the chip. All PWM outputs
+support the setting of the output frequency via the freq attribute.
+
+In automatic mode, the chip supports the setting of the PWM ramp rate which
+defines how fast the PWM output is adjusting to changes of the associated
+temperature input. Associating PWM outputs to temperature inputs is done via
+temperature zones. The chip features 3 zones whose assignments to temperature
+inputs is static and determined during initialization. These assignments can
+be retrieved via the zone[1-3]_auto_channels_temp attributes. Each PWM output
+is assigned to one (or hottest of multiple) temperature zone(s) through the
+pwm[1-3]_auto_channels_zone attributes. Each PWM output has 3 distinct output
+duty-cycles: full, low, and min. Full is internally hard-wired to 255 (100%)
+and low and min can be programmed via pwm[1-3]_auto_point1_pwm and
+pwm[1-3]_auto_pwm_min, respectively. The thermal thresholds of the zones are
+programmed via zone[1-3]_auto_point[1-3]_temp and
+zone[1-3]_auto_point1_temp_hyst:
+
+ =============================== =======================================
+ pwm[1-3]_auto_point2_pwm full-speed duty-cycle (255, i.e., 100%)
+ pwm[1-3]_auto_point1_pwm low-speed duty-cycle
+ pwm[1-3]_auto_pwm_min min-speed duty-cycle
+
+ zone[1-3]_auto_point3_temp full-speed temp (all outputs)
+ zone[1-3]_auto_point2_temp full-speed temp
+ zone[1-3]_auto_point1_temp low-speed temp
+ zone[1-3]_auto_point1_temp_hyst min-speed temp
+ =============================== =======================================
+
+The chip adjusts the output duty-cycle linearly in the range of auto_point1_pwm
+to auto_point2_pwm if the temperature of the associated zone is between
+auto_point1_temp and auto_point2_temp. If the temperature drops below the
+auto_point1_temp_hyst value, the output duty-cycle is set to the auto_pwm_min
+value which only supports two values: 0 or auto_point1_pwm. That means that the
+fan either turns completely off or keeps spinning with the low-speed
+duty-cycle. If any of the temperatures rise above the auto_point3_temp value,
+all PWM outputs are set to 100% duty-cycle.
+
+Following is another representation of how the chip sets the output duty-cycle
+based on the temperature of the associated thermal zone:
+
+ =============== =============== =================
+ Temperature Duty-Cycle Duty-Cycle
+ Rising Temp Falling Temp
+ =============== =============== =================
+ full-speed full-speed full-speed
+
+ - < linearly -
+ adjusted
+ duty-cycle >
+
+ low-speed low-speed low-speed
+ - min-speed low-speed
+ min-speed min-speed min-speed
+ - min-speed min-speed
+ =============== =============== =================
+
+
+Sysfs Attributes
+----------------
+
+Following is a list of all sysfs attributes that the driver provides, their
+permissions and a short description:
+
+=============================== ======= =======================================
+Name Perm Description
+=============================== ======= =======================================
+cpu0_vid RO CPU core reference voltage in
+ millivolts.
+vrm RW Voltage regulator module version
+ number.
+
+in[0-7]_input RO Measured voltage in millivolts.
+in[0-7]_min RW Low limit for voltage input.
+in[0-7]_max RW High limit for voltage input.
+in[0-7]_alarm RO Voltage input alarm. Returns 1 if
+ voltage input is or went outside the
+ associated min-max range, 0 otherwise.
+
+temp[1-3]_input RO Measured temperature in millidegree
+ Celsius.
+temp[1-3]_min RW Low limit for temp input.
+temp[1-3]_max RW High limit for temp input.
+temp[1-3]_offset RW Offset for temp input. This value will
+ be added by the chip to the measured
+ temperature.
+temp[1-3]_alarm RO Alarm for temp input. Returns 1 if temp
+ input is or went outside the associated
+ min-max range, 0 otherwise.
+temp[1-3]_fault RO Temp input fault. Returns 1 if the chip
+ detects a faulty thermal diode or an
+ unconnected temp input, 0 otherwise.
+
+zone[1-3]_auto_channels_temp RO Temperature zone to temperature input
+ mapping. This attribute is a bitfield
+ and supports the following values:
+
+ - 1: temp1
+ - 2: temp2
+ - 4: temp3
+zone[1-3]_auto_point1_temp_hyst RW Auto PWM temp point1 hysteresis. The
+ output of the corresponding PWM is set
+ to the pwm_auto_min value if the temp
+ falls below the auto_point1_temp_hyst
+ value.
+zone[1-3]_auto_point[1-3]_temp RW Auto PWM temp points. Auto_point1 is
+ the low-speed temp, auto_point2 is the
+ full-speed temp, and auto_point3 is the
+ temp at which all PWM outputs are set
+ to full-speed (100% duty-cycle).
+
+fan[1-6]_input RO Measured fan speed in RPM.
+fan[1-6]_min RW Low limit for fan input.
+fan[1-6]_alarm RO Alarm for fan input. Returns 1 if fan
+ input is or went below the associated
+ min value, 0 otherwise.
+fan[1-4]_type RW Type of attached fan. Expressed in
+ number of pulses per revolution that
+ the fan generates. Supported values are
+ 1, 2, and 4.
+fan[5-6]_max RW Max attainable RPM at 100% duty-cycle.
+ Required for chip to adjust the
+ sampling rate accordingly.
+
+pmw[1-3,5-6] RO/RW Duty-cycle of PWM output. Supported
+ values are 0-255 (0%-100%). Only
+ writeable if the associated PWM is in
+ manual mode.
+pwm[1-3]_enable RW Enable of PWM outputs 1-3. Supported
+ values are:
+
+ - 0: turned off (output @ 100%)
+ - 1: manual mode
+ - 2: automatic mode
+pwm[5-6]_enable RO Enable of PWM outputs 5-6. Always
+ returns 1 since these 2 outputs are
+ hard-wired to manual mode.
+pmw[1-3,5-6]_freq RW Frequency of PWM output. Supported
+ values are in the range 11Hz-30000Hz
+ (default is 25000Hz).
+pmw[1-3]_ramp_rate RW Ramp rate of PWM output. Determines how
+ fast the PWM duty-cycle will change
+ when the PWM is in automatic mode.
+ Expressed in ms per PWM step. Supported
+ values are in the range 0ms-206ms
+ (default is 0, which means the duty-
+ cycle changes instantly).
+pwm[1-3]_auto_channels_zone RW PWM output to temperature zone mapping.
+ This attribute is a bitfield and
+ supports the following values:
+
+ - 1: zone1
+ - 2: zone2
+ - 4: zone3
+ - 6: highest of zone[2-3]
+ - 7: highest of zone[1-3]
+pwm[1-3]_auto_pwm_min RW Auto PWM min pwm. Minimum PWM duty-
+ cycle. Supported values are 0 or
+ auto_point1_pwm.
+pwm[1-3]_auto_point1_pwm RW Auto PWM pwm point. Auto_point1 is the
+ low-speed duty-cycle.
+pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the
+ full-speed duty-cycle which is hard-
+ wired to 255 (100% duty-cycle).
+=============================== ======= =======================================
+
+Chip Differences
+----------------
+
+======================= ======= ======= ======= =======
+Feature dme1737 sch311x sch5027 sch5127
+======================= ======= ======= ======= =======
+temp[1-3]_offset yes yes
+vid yes
+zone3 yes yes yes
+zone[1-3]_hyst yes yes
+pwm min/off yes yes
+fan3 opt yes opt yes
+pwm3 opt yes opt yes
+fan4 opt opt
+fan5 opt opt
+pwm5 opt opt
+fan6 opt opt
+pwm6 opt opt
+in7 yes
+======================= ======= ======= ======= =======
diff --git a/Documentation/hwmon/dps920ab.rst b/Documentation/hwmon/dps920ab.rst
new file mode 100644
index 000000000..c33b4cdc0
--- /dev/null
+++ b/Documentation/hwmon/dps920ab.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver dps920ab
+========================
+
+Supported chips:
+
+ * Delta DPS920AB
+
+ Prefix: 'dps920ab'
+
+ Addresses scanned: -
+
+Authors:
+ Robert Marko <robert.marko@sartura.hr>
+
+
+Description
+-----------
+
+This driver implements support for Delta DPS920AB 920W 54V DC single output
+power supply with PMBus support.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Sysfs entries
+-------------
+
+======================= ======================================================
+curr1_label "iin"
+curr1_input Measured input current
+curr1_alarm Input current high alarm
+
+curr2_label "iout1"
+curr2_input Measured output current
+curr2_max Maximum output current
+curr2_rated_max Maximum rated output current
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_alarm Input voltage alarm
+
+in2_label "vout1"
+in2_input Measured output voltage
+in2_rated_min Minimum rated output voltage
+in2_rated_max Maximum rated output voltage
+in2_alarm Output voltage alarm
+
+power1_label "pin"
+power1_input Measured input power
+power1_alarm Input power high alarm
+
+power2_label "pout1"
+power2_input Measured output power
+power2_rated_max Maximum rated output power
+
+temp[1-3]_input Measured temperature
+temp[1-3]_alarm Temperature alarm
+
+fan1_alarm Fan 1 warning.
+fan1_fault Fan 1 fault.
+fan1_input Fan 1 speed in RPM.
+======================= ======================================================
diff --git a/Documentation/hwmon/drivetemp.rst b/Documentation/hwmon/drivetemp.rst
new file mode 100644
index 000000000..0b1cf2f91
--- /dev/null
+++ b/Documentation/hwmon/drivetemp.rst
@@ -0,0 +1,70 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver drivetemp
+=======================
+
+
+References
+----------
+
+ANS T13/1699-D
+Information technology - AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
+
+ANS Project T10/BSR INCITS 513
+Information technology - SCSI Primary Commands - 4 (SPC-4)
+
+ANS Project INCITS 557
+Information technology - SCSI / ATA Translation - 5 (SAT-5)
+
+
+Description
+-----------
+
+This driver supports reporting the temperature of disk and solid state
+drives with temperature sensors.
+
+If supported, it uses the ATA SCT Command Transport feature to read
+the current drive temperature and, if available, temperature limits
+as well as historic minimum and maximum temperatures. If SCT Command
+Transport is not supported, the driver uses SMART attributes to read
+the drive temperature.
+
+
+Usage Note
+----------
+
+Reading the drive temperature may reset the spin down timer on some drives.
+This has been observed with WD120EFAX drives, but may be seen with other
+drives as well. The same behavior is observed if the 'hdtemp' or 'smartd'
+tools are used to access the drive.
+With the WD120EFAX drive, reading the drive temperature using the drivetemp
+driver is still possible _after_ it transitioned to standby mode, and
+reading the drive temperature in this mode will not cause the drive to
+change its mode (meaning the drive will not spin up). It is unknown if other
+drives experience similar behavior.
+
+A known workaround for WD120EFAX drives is to read the drive temperature at
+intervals larger than twice the spin-down time. Otherwise affected drives
+will never spin down.
+
+
+Sysfs entries
+-------------
+
+Only the temp1_input attribute is always available. Other attributes are
+available only if reported by the drive. All temperatures are reported in
+milli-degrees Celsius.
+
+======================= =====================================================
+temp1_input Current drive temperature
+temp1_lcrit Minimum temperature limit. Operating the device below
+ this temperature may cause physical damage to the
+ device.
+temp1_min Minimum recommended continuous operating limit
+temp1_max Maximum recommended continuous operating temperature
+temp1_crit Maximum temperature limit. Operating the device above
+ this temperature may cause physical damage to the
+ device.
+temp1_lowest Minimum temperature seen this power cycle
+temp1_highest Maximum temperature seen this power cycle
+======================= =====================================================
diff --git a/Documentation/hwmon/ds1621.rst b/Documentation/hwmon/ds1621.rst
new file mode 100644
index 000000000..552b37e9d
--- /dev/null
+++ b/Documentation/hwmon/ds1621.rst
@@ -0,0 +1,217 @@
+Kernel driver ds1621
+====================
+
+Supported chips:
+
+ * Dallas Semiconductor / Maxim Integrated DS1621
+
+ Prefix: 'ds1621'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available from www.maximintegrated.com
+
+ * Dallas Semiconductor DS1625
+
+ Prefix: 'ds1625'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available from www.datasheetarchive.com
+
+ * Maxim Integrated DS1631
+
+ Prefix: 'ds1631'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available from www.maximintegrated.com
+
+ * Maxim Integrated DS1721
+
+ Prefix: 'ds1721'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available from www.maximintegrated.com
+
+ * Maxim Integrated DS1731
+
+ Prefix: 'ds1731'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available from www.maximintegrated.com
+
+Authors:
+ - Christian W. Zuckschwerdt <zany@triq.net>
+ - valuable contributions by Jan M. Sendler <sendler@sendler.de>
+ - ported to 2.6 by Aurelien Jarno <aurelien@aurel32.net>
+ with the help of Jean Delvare <jdelvare@suse.de>
+
+Module Parameters
+------------------
+
+* polarity int
+ Output's polarity:
+
+ * 0 = active high,
+ * 1 = active low
+
+Description
+-----------
+
+The DS1621 is a (one instance) digital thermometer and thermostat. It has
+both high and low temperature limits which can be user defined (i.e.
+programmed into non-volatile on-chip registers). Temperature range is -55
+degree Celsius to +125 in 0.5 increments. You may convert this into a
+Fahrenheit range of -67 to +257 degrees with 0.9 steps. If polarity
+parameter is not provided, original value is used.
+
+As for the thermostat, behavior can also be programmed using the polarity
+toggle. On the one hand ("heater"), the thermostat output of the chip,
+Tout, will trigger when the low limit temperature is met or underrun and
+stays high until the high limit is met or exceeded. On the other hand
+("cooler"), vice versa. That way "heater" equals "active low", whereas
+"conditioner" equals "active high". Please note that the DS1621 data sheet
+is somewhat misleading in this point since setting the polarity bit does
+not simply invert Tout.
+
+A second thing is that, during extensive testing, Tout showed a tolerance
+of up to +/- 0.5 degrees even when compared against precise temperature
+readings. Be sure to have a high vs. low temperature limit gap of al least
+1.0 degree Celsius to avoid Tout "bouncing", though!
+
+The alarm bits are set when the high or low limits are met or exceeded and
+are reset by the module as soon as the respective temperature ranges are
+left.
+
+The alarm registers are in no way suitable to find out about the actual
+status of Tout. They will only tell you about its history, whether or not
+any of the limits have ever been met or exceeded since last power-up or
+reset. Be aware: When testing, it showed that the status of Tout can change
+with neither of the alarms set.
+
+Since there is no version or vendor identification register, there is
+no unique identification for these devices. Therefore, explicit device
+instantiation is required for correct device identification and functionality
+(one device per address in this address range: 0x48..0x4f).
+
+The DS1625 is pin compatible and functionally equivalent with the DS1621,
+but the DS1621 is meant to replace it. The DS1631, DS1721, and DS1731 are
+also pin compatible with the DS1621 and provide multi-resolution support.
+
+Additionally, the DS1721 data sheet says the temperature flags (THF and TLF)
+are used internally, however, these flags do get set and cleared as the actual
+temperature crosses the min or max settings (which by default are set to 75
+and 80 degrees respectively).
+
+Temperature Conversion
+----------------------
+
+- DS1621 - 750ms (older devices may take up to 1000ms)
+- DS1625 - 500ms
+- DS1631 - 93ms..750ms for 9..12 bits resolution, respectively.
+- DS1721 - 93ms..750ms for 9..12 bits resolution, respectively.
+- DS1731 - 93ms..750ms for 9..12 bits resolution, respectively.
+
+Note:
+On the DS1621, internal access to non-volatile registers may last for 10ms
+or less (unverified on the other devices).
+
+Temperature Accuracy
+--------------------
+
+- DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees)
+- DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees)
+- DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees)
+- DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees)
+- DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees)
+
+.. Note::
+
+ Please refer to the device datasheets for accuracy at other temperatures.
+
+Temperature Resolution:
+-----------------------
+As mentioned above, the DS1631, DS1721, and DS1731 provide multi-resolution
+support, which is achieved via the R0 and R1 config register bits, where:
+
+R0..R1
+------
+
+== == ===============================
+R0 R1
+== == ===============================
+ 0 0 9 bits, 0.5 degrees Celsius
+ 1 0 10 bits, 0.25 degrees Celsius
+ 0 1 11 bits, 0.125 degrees Celsius
+ 1 1 12 bits, 0.0625 degrees Celsius
+== == ===============================
+
+.. Note::
+
+ At initial device power-on, the default resolution is set to 12-bits.
+
+The resolution mode for the DS1631, DS1721, or DS1731 can be changed from
+userspace, via the device 'update_interval' sysfs attribute. This attribute
+will normalize the range of input values to the device maximum resolution
+values defined in the datasheet as follows:
+
+============= ================== ===============
+Resolution Conversion Time Input Range
+ (C/LSB) (msec) (msec)
+============= ================== ===============
+0.5 93.75 0....94
+0.25 187.5 95...187
+0.125 375 188..375
+0.0625 750 376..infinity
+============= ================== ===============
+
+The following examples show how the 'update_interval' attribute can be
+used to change the conversion time::
+
+ $ cat update_interval
+ 750
+ $ cat temp1_input
+ 22062
+ $
+ $ echo 300 > update_interval
+ $ cat update_interval
+ 375
+ $ cat temp1_input
+ 22125
+ $
+ $ echo 150 > update_interval
+ $ cat update_interval
+ 188
+ $ cat temp1_input
+ 22250
+ $
+ $ echo 1 > update_interval
+ $ cat update_interval
+ 94
+ $ cat temp1_input
+ 22000
+ $
+ $ echo 1000 > update_interval
+ $ cat update_interval
+ 750
+ $ cat temp1_input
+ 22062
+ $
+
+As shown, the ds1621 driver automatically adjusts the 'update_interval'
+user input, via a step function. Reading back the 'update_interval' value
+after a write operation provides the conversion time used by the device.
+
+Mathematically, the resolution can be derived from the conversion time
+via the following function:
+
+ g(x) = 0.5 * [minimum_conversion_time/x]
+
+where:
+
+ - 'x' = the output from 'update_interval'
+ - 'g(x)' = the resolution in degrees C per LSB.
+ - 93.75ms = minimum conversion time
diff --git a/Documentation/hwmon/ds620.rst b/Documentation/hwmon/ds620.rst
new file mode 100644
index 000000000..2d686b17b
--- /dev/null
+++ b/Documentation/hwmon/ds620.rst
@@ -0,0 +1,38 @@
+Kernel driver ds620
+===================
+
+Supported chips:
+
+ * Dallas Semiconductor DS620
+
+ Prefix: 'ds620'
+
+ Datasheet: Publicly available at the Dallas Semiconductor website
+
+ http://www.dalsemi.com/
+
+Authors:
+ Roland Stigge <stigge@antcom.de>
+ based on ds1621.c by
+ Christian W. Zuckschwerdt <zany@triq.net>
+
+Description
+-----------
+
+The DS620 is a (one instance) digital thermometer and thermostat. It has both
+high and low temperature limits which can be user defined (i.e. programmed
+into non-volatile on-chip registers). Temperature range is -55 degree Celsius
+to +125. Between 0 and 70 degree Celsius, accuracy is 0.5 Kelvin. The value
+returned via sysfs displays post decimal positions.
+
+The thermostat function works as follows: When configured via platform_data
+(struct ds620_platform_data) .pomode == 0 (default), the thermostat output pin
+PO is always low. If .pomode == 1, the thermostat is in PO_LOW mode. I.e., the
+output pin PO becomes active when the temperature falls below temp1_min and
+stays active until the temperature goes above temp1_max.
+
+Likewise, with .pomode == 2, the thermostat is in PO_HIGH mode. I.e., the PO
+output pin becomes active when the temperature goes above temp1_max and stays
+active until the temperature falls below temp1_min.
+
+The PO output pin of the DS620 operates active-low.
diff --git a/Documentation/hwmon/emc1403.rst b/Documentation/hwmon/emc1403.rst
new file mode 100644
index 000000000..0de9616b2
--- /dev/null
+++ b/Documentation/hwmon/emc1403.rst
@@ -0,0 +1,80 @@
+Kernel driver emc1403
+=====================
+
+Supported chips:
+
+ * SMSC / Microchip EMC1402, EMC1412
+
+ Addresses scanned: I2C 0x18, 0x1c, 0x29, 0x4c, 0x4d, 0x5c
+
+ Prefix: 'emc1402'
+
+ Datasheets:
+
+ - http://ww1.microchip.com/downloads/en/DeviceDoc/1412.pdf
+ - https://ww1.microchip.com/downloads/en/DeviceDoc/1402.pdf
+
+ * SMSC / Microchip EMC1403, EMC1404, EMC1413, EMC1414
+
+ Addresses scanned: I2C 0x18, 0x29, 0x4c, 0x4d
+
+ Prefix: 'emc1403', 'emc1404'
+
+ Datasheets:
+
+ - http://ww1.microchip.com/downloads/en/DeviceDoc/1403_1404.pdf
+ - http://ww1.microchip.com/downloads/en/DeviceDoc/1413_1414.pdf
+
+ * SMSC / Microchip EMC1422
+
+ Addresses scanned: I2C 0x4c
+
+ Prefix: 'emc1422'
+
+ Datasheet:
+
+ - https://ww1.microchip.com/downloads/en/DeviceDoc/1422.pdf
+
+ * SMSC / Microchip EMC1423, EMC1424
+
+ Addresses scanned: I2C 0x4c
+
+ Prefix: 'emc1423', 'emc1424'
+
+ Datasheet:
+
+ - https://ww1.microchip.com/downloads/en/DeviceDoc/1423_1424.pdf
+
+Author:
+ Kalhan Trisal <kalhan.trisal@intel.com
+
+
+Description
+-----------
+
+The Standard Microsystems Corporation (SMSC) / Microchip EMC14xx chips
+contain up to four temperature sensors. EMC14x2 support two sensors
+(one internal, one external). EMC14x3 support three sensors (one internal,
+two external), and EMC14x4 support four sensors (one internal, three
+external).
+
+The chips implement three limits for each sensor: low (tempX_min), high
+(tempX_max) and critical (tempX_crit.) The chips also implement an
+hysteresis mechanism which applies to all limits. The relative difference
+is stored in a single register on the chip, which means that the relative
+difference between the limit and its hysteresis is always the same for
+all three limits.
+
+This implementation detail implies the following:
+
+* When setting a limit, its hysteresis will automatically follow, the
+ difference staying unchanged. For example, if the old critical limit
+ was 80 degrees C, and the hysteresis was 75 degrees C, and you change
+ the critical limit to 90 degrees C, then the hysteresis will
+ automatically change to 85 degrees C.
+* The hysteresis values can't be set independently. We decided to make
+ only temp1_crit_hyst writable, while all other hysteresis attributes
+ are read-only. Setting temp1_crit_hyst writes the difference between
+ temp1_crit_hyst and temp1_crit into the chip, and the same relative
+ hysteresis applies automatically to all other limits.
+* The limits should be set before the hysteresis.
diff --git a/Documentation/hwmon/emc2103.rst b/Documentation/hwmon/emc2103.rst
new file mode 100644
index 000000000..6a6ca6d1b
--- /dev/null
+++ b/Documentation/hwmon/emc2103.rst
@@ -0,0 +1,37 @@
+Kernel driver emc2103
+======================
+
+Supported chips:
+
+ * SMSC EMC2103
+
+ Addresses scanned: I2C 0x2e
+
+ Prefix: 'emc2103'
+
+ Datasheet: Not public
+
+Authors:
+ Steve Glendinning <steve.glendinning@smsc.com>
+
+Description
+-----------
+
+The Standard Microsystems Corporation (SMSC) EMC2103 chips
+contain up to 4 temperature sensors and a single fan controller.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 1, the lowest
+representable value is 480 RPM.
+
+This driver supports RPM based control, to use this a fan target
+should be written to fan1_target and pwm1_enable should be set to 3.
+
+The 2103-2 and 2103-4 variants have a third temperature sensor, which can
+be connected to two anti-parallel diodes. These values can be read
+as temp3 and temp4. If only one diode is attached to this channel, temp4
+will show as "fault". The module parameter "apd=0" can be used to suppress
+this 4th channel when anti-parallel diodes are not fitted.
diff --git a/Documentation/hwmon/emc2305.rst b/Documentation/hwmon/emc2305.rst
new file mode 100644
index 000000000..2403dbaf2
--- /dev/null
+++ b/Documentation/hwmon/emc2305.rst
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver emc2305
+=====================
+
+Supported chips:
+ Microchip EMC2305, EMC2303, EMC2302, EMC2301
+
+ Addresses scanned: I2C 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d
+ Prefixes: 'emc2305'
+
+ Datasheet: Publicly available at the Microchip website :
+ https://www.microchip.com/en-us/product/EMC2305
+
+Description:
+------------
+This driver implements support for Microchip EMC2301/2/3/5 RPM-based PWM Fan Controller.
+The EMC2305 Fan Controller supports up to 5 independently controlled PWM fan drives.
+Fan rotation speeds are reported in RPM.
+The driver supports the RPM-based PWM control to keep a fan at the desired speed.
+The driver provides the possibility to have one common PWM interface for all FANs
+or up to the maximum available or configured independent PWMs.
+
+The driver provides the following sysfs interfaces in hwmon subsystem:
+
+================= == ===================================================
+fan[1-5]_fault RO files for tachometers TACH1-TACH5 fault indication
+fan[1-5]_input RO files for tachometers TACH1-TACH5 input (in RPM)
+pwm[1-5] RW file for fan[1-5] target duty cycle (0..255)
+================= == ===================================================
+
+sysfs interfaces in thermal subsystem:
+
+================= == ========================================================================
+cur_state RW file for the current cooling state of the cooling device (0..max_state)
+max_state RO file for the maximum cooling state of the cooling device
+================= == ========================================================================
diff --git a/Documentation/hwmon/emc6w201.rst b/Documentation/hwmon/emc6w201.rst
new file mode 100644
index 000000000..a8e1185b9
--- /dev/null
+++ b/Documentation/hwmon/emc6w201.rst
@@ -0,0 +1,47 @@
+Kernel driver emc6w201
+======================
+
+Supported chips:
+
+ * SMSC EMC6W201
+
+ Prefix: 'emc6w201'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: Not public
+
+Author: Jean Delvare <jdelvare@suse.de>
+
+
+Description
+-----------
+
+From the datasheet:
+
+"The EMC6W201 is an environmental monitoring device with automatic fan
+control capability and enhanced system acoustics for noise suppression.
+This ACPI compliant device provides hardware monitoring for up to six
+voltages (including its own VCC) and five external thermal sensors,
+measures the speed of up to five fans, and controls the speed of
+multiple DC fans using three Pulse Width Modulator (PWM) outputs. Note
+that it is possible to control more than three fans by connecting two
+fans to one PWM output. The EMC6W201 will be available in a 36-pin
+QFN package."
+
+The device is functionally close to the EMC6D100 series, but is
+register-incompatible.
+
+The driver currently only supports the monitoring of the voltages,
+temperatures and fan speeds. Limits can be changed. Alarms are not
+supported, and neither is fan speed control.
+
+
+Known Systems With EMC6W201
+---------------------------
+
+The EMC6W201 is a rare device, only found on a few systems, made in
+2005 and 2006. Known systems with this device:
+
+* Dell Precision 670 workstation
+* Gigabyte 2CEWH mainboard
diff --git a/Documentation/hwmon/f71805f.rst b/Documentation/hwmon/f71805f.rst
new file mode 100644
index 000000000..1efe5e5d3
--- /dev/null
+++ b/Documentation/hwmon/f71805f.rst
@@ -0,0 +1,181 @@
+Kernel driver f71805f
+=====================
+
+Supported chips:
+
+ * Fintek F71805F/FG
+
+ Prefix: 'f71805f'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Available from the Fintek website
+
+ * Fintek F71806F/FG
+
+ Prefix: 'f71872f'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Available from the Fintek website
+
+ * Fintek F71872F/FG
+
+ Prefix: 'f71872f'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Available from the Fintek website
+
+Author: Jean Delvare <jdelvare@suse.de>
+
+Thanks to Denis Kieft from Barracuda Networks for the donation of a
+test system (custom Jetway K8M8MS motherboard, with CPU and RAM) and
+for providing initial documentation.
+
+Thanks to Kris Chen and Aaron Huang from Fintek for answering technical
+questions and providing additional documentation.
+
+Thanks to Chris Lin from Jetway for providing wiring schematics and
+answering technical questions.
+
+
+Description
+-----------
+
+The Fintek F71805F/FG Super I/O chip includes complete hardware monitoring
+capabilities. It can monitor up to 9 voltages (counting its own power
+source), 3 fans and 3 temperature sensors.
+
+This chip also has fan controlling features, using either DC or PWM, in
+three different modes (one manual, two automatic).
+
+The Fintek F71872F/FG Super I/O chip is almost the same, with two
+additional internal voltages monitored (VSB and battery). It also features
+6 VID inputs. The VID inputs are not yet supported by this driver.
+
+The Fintek F71806F/FG Super-I/O chip is essentially the same as the
+F71872F/FG, and is undistinguishable therefrom.
+
+The driver assumes that no more than one chip is present, which seems
+reasonable.
+
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by an 8-bit ADC with a LSB of 8 mV. The supported
+range is thus from 0 to 2.040 V. Voltage values outside of this range
+need external resistors. An exception is in0, which is used to monitor
+the chip's own power source (+3.3V), and is divided internally by a
+factor 2. For the F71872F/FG, in9 (VSB) and in10 (battery) are also
+divided internally by a factor 2.
+
+The two LSB of the voltage limit registers are not used (always 0), so
+you can only set the limits in steps of 32 mV (before scaling).
+
+The wirings and resistor values suggested by Fintek are as follow:
+
+======= ======= =========== ==== ======= ============ ==============
+in pin expected
+ name use R1 R2 divider raw val.
+======= ======= =========== ==== ======= ============ ==============
+in0 VCC VCC3.3V int. int. 2.00 1.65 V
+in1 VIN1 VTT1.2V 10K - 1.00 1.20 V
+in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V [1]_
+in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V [2]_
+in4 VIN4 VCC5V 200K 47K 5.25 0.95 V
+in5 VIN5 +12V 200K 20K 11.00 1.05 V
+in6 VIN6 VCC1.5V 10K - 1.00 1.50 V
+in7 VIN7 VCORE 10K - 1.00 ~1.40 V [1]_
+in8 VIN8 VSB5V 200K 47K 1.00 0.95 V
+in10 VSB VSB3.3V int. int. 2.00 1.65 V [3]_
+in9 VBAT VBATTERY int. int. 2.00 1.50 V [3]_
+======= ======= =========== ==== ======= ============ ==============
+
+.. [1] Depends on your hardware setup.
+.. [2] Obviously not correct, swapping R1 and R2 would make more sense.
+.. [3] F71872F/FG only.
+
+These values can be used as hints at best, as motherboard manufacturers
+are free to use a completely different setup. As a matter of fact, the
+Jetway K8M8MS uses a significantly different setup. You will have to
+find out documentation about your own motherboard, and edit sensors.conf
+accordingly.
+
+Each voltage measured has associated low and high limits, each of which
+triggers an alarm when crossed.
+
+
+Fan Monitoring
+--------------
+
+Fan rotation speeds are reported as 12-bit values from a gated clock
+signal. Speeds down to 366 RPM can be measured. There is no theoretical
+high limit, but values over 6000 RPM seem to cause problem. The effective
+resolution is much lower than you would expect, the step between different
+register values being 10 rather than 1.
+
+The chip assumes 2 pulse-per-revolution fans.
+
+An alarm is triggered if the rotation speed drops below a programmable
+limit or is too low to be measured.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are reported in degrees Celsius. Each temperature measured
+has a high limit, those crossing triggers an alarm. There is an associated
+hysteresis value, below which the temperature has to drop before the
+alarm is cleared.
+
+All temperature channels are external, there is no embedded temperature
+sensor. Each channel can be used for connecting either a thermal diode
+or a thermistor. The driver reports the currently selected mode, but
+doesn't allow changing it. In theory, the BIOS should have configured
+everything properly.
+
+
+Fan Control
+-----------
+
+Both PWM (pulse-width modulation) and DC fan speed control methods are
+supported. The right one to use depends on external circuitry on the
+motherboard, so the driver assumes that the BIOS set the method
+properly. The driver will report the method, but won't let you change
+it.
+
+When the PWM method is used, you can select the operating frequency,
+from 187.5 kHz (default) to 31 Hz. The best frequency depends on the
+fan model. As a rule of thumb, lower frequencies seem to give better
+control, but may generate annoying high-pitch noise. So a frequency just
+above the audible range, such as 25 kHz, may be a good choice; if this
+doesn't give you good linear control, try reducing it. Fintek recommends
+not going below 1 kHz, as the fan tachometers get confused by lower
+frequencies as well.
+
+When the DC method is used, Fintek recommends not going below 5 V, which
+corresponds to a pwm value of 106 for the driver. The driver doesn't
+enforce this limit though.
+
+Three different fan control modes are supported; the mode number is written
+to the pwm<n>_enable file.
+
+* 1: Manual mode
+ You ask for a specific PWM duty cycle or DC voltage by writing to the
+ pwm<n> file.
+
+* 2: Temperature mode
+ You define 3 temperature/fan speed trip points using the
+ pwm<n>_auto_point<m>_temp and _fan files. These define a staircase
+ relationship between temperature and fan speed with two additional points
+ interpolated between the values that you define. When the temperature
+ is below auto_point1_temp the fan is switched off.
+
+* 3: Fan speed mode
+ You ask for a specific fan speed by writing to the fan<n>_target file.
+
+Both of the automatic modes require that pwm1 corresponds to fan1, pwm2 to
+fan2 and pwm3 to fan3. Temperature mode also requires that temp1 corresponds
+to pwm1 and fan1, etc.
diff --git a/Documentation/hwmon/f71882fg.rst b/Documentation/hwmon/f71882fg.rst
new file mode 100644
index 000000000..38e30fbd4
--- /dev/null
+++ b/Documentation/hwmon/f71882fg.rst
@@ -0,0 +1,192 @@
+Kernel driver f71882fg
+======================
+
+Supported chips:
+
+ * Fintek F71808E
+
+ Prefix: 'f71808e'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Not public
+
+ * Fintek F71808A
+
+ Prefix: 'f71808a'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Not public
+
+ * Fintek F71858FG
+
+ Prefix: 'f71858fg'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Available from the Fintek website
+
+ * Fintek F71862FG and F71863FG
+
+ Prefix: 'f71862fg'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Available from the Fintek website
+
+ * Fintek F71869F and F71869E
+
+ Prefix: 'f71869'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Available from the Fintek website
+
+ * Fintek F71869A
+
+ Prefix: 'f71869a'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Not public
+
+ * Fintek F71882FG and F71883FG
+
+ Prefix: 'f71882fg'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Available from the Fintek website
+
+ * Fintek F71889FG
+
+ Prefix: 'f71889fg'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Available from the Fintek website
+
+ * Fintek F71889ED
+
+ Prefix: 'f71889ed'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Should become available on the Fintek website soon
+
+ * Fintek F71889A
+
+ Prefix: 'f71889a'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Should become available on the Fintek website soon
+
+ * Fintek F8000
+
+ Prefix: 'f8000'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Not public
+
+ * Fintek F81801U
+
+ Prefix: 'f71889fg'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Not public
+
+ Note:
+ This is the 64-pin variant of the F71889FG, they have the
+ same device ID and are fully compatible as far as hardware
+ monitoring is concerned.
+
+ * Fintek F81865F
+
+ Prefix: 'f81865f'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Available from the Fintek website
+
+Author: Hans de Goede <hdegoede@redhat.com>
+
+
+Description
+-----------
+
+Fintek F718xx/F8000 Super I/O chips include complete hardware monitoring
+capabilities. They can monitor up to 9 voltages, 4 fans and 3 temperature
+sensors.
+
+These chips also have fan controlling features, using either DC or PWM, in
+three different modes (one manual, two automatic).
+
+The driver assumes that no more than one chip is present, which seems
+reasonable.
+
+
+Monitoring
+----------
+
+The Voltage, Fan and Temperature Monitoring uses the standard sysfs
+interface as documented in sysfs-interface, without any exceptions.
+
+
+Fan Control
+-----------
+
+Both PWM (pulse-width modulation) and DC fan speed control methods are
+supported. The right one to use depends on external circuitry on the
+motherboard, so the driver assumes that the BIOS set the method
+properly.
+
+Note that the lowest numbered temperature zone trip point corresponds to
+the border between the highest and one but highest temperature zones, and
+vica versa. So the temperature zone trip points 1-4 (or 1-2) go from high temp
+to low temp! This is how things are implemented in the IC, and the driver
+mimics this.
+
+There are 2 modes to specify the speed of the fan, PWM duty cycle (or DC
+voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM
+mode where the actual RPM of the fan (as measured) is controlled and the speed
+gets specified as 0-100% of the fan#_full_speed file.
+
+Since both modes work in a 0-100% (mapped to 0-255) scale, there isn't a
+whole lot of a difference when modifying fan control settings. The only
+important difference is that in RPM mode the 0-100% controls the fan speed
+between 0-100% of fan#_full_speed. It is assumed that if the BIOS programs
+RPM mode, it will also set fan#_full_speed properly, if it does not then
+fan control will not work properly, unless you set a sane fan#_full_speed
+value yourself.
+
+Switching between these modes requires re-initializing a whole bunch of
+registers, so the mode which the BIOS has set is kept. The mode is
+printed when loading the driver.
+
+Three different fan control modes are supported; the mode number is written
+to the pwm#_enable file. Note that not all modes are supported on all
+chips, and some modes may only be available in RPM / PWM mode.
+Writing an unsupported mode will result in an invalid parameter error.
+
+* 1: Manual mode
+ You ask for a specific PWM duty cycle / DC voltage or a specific % of
+ fan#_full_speed by writing to the pwm# file. This mode is only
+ available on the F71858FG / F8000 if the fan channel is in RPM mode.
+
+* 2: Normal auto mode
+ You can define a number of temperature/fan speed trip points, which % the
+ fan should run at at this temp and which temp a fan should follow using the
+ standard sysfs interface. The number and type of trip points is chip
+ depended, see which files are available in sysfs.
+ Fan/PWM channel 3 of the F8000 is always in this mode!
+
+* 3: Thermostat mode (Only available on the F8000 when in duty cycle mode)
+ The fan speed is regulated to keep the temp the fan is mapped to between
+ temp#_auto_point2_temp and temp#_auto_point3_temp.
+
+All of the automatic modes require that pwm1 corresponds to fan1, pwm2 to
+fan2 and pwm3 to fan3.
diff --git a/Documentation/hwmon/fam15h_power.rst b/Documentation/hwmon/fam15h_power.rst
new file mode 100644
index 000000000..fdde632c9
--- /dev/null
+++ b/Documentation/hwmon/fam15h_power.rst
@@ -0,0 +1,131 @@
+Kernel driver fam15h_power
+==========================
+
+Supported chips:
+
+* AMD Family 15h Processors
+
+* AMD Family 16h Processors
+
+ Prefix: 'fam15h_power'
+
+ Addresses scanned: PCI space
+
+ Datasheets:
+
+ - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
+ - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors
+ - AMD64 Architecture Programmer's Manual Volume 2: System Programming
+
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
+
+Description
+-----------
+
+1) Processor TDP (Thermal design power)
+
+Given a fixed frequency and voltage, the power consumption of a
+processor varies based on the workload being executed. Derated power
+is the power consumed when running a specific application. Thermal
+design power (TDP) is an example of derated power.
+
+This driver permits reading of registers providing power information
+of AMD Family 15h and 16h processors via TDP algorithm.
+
+For AMD Family 15h and 16h processors the following power values can
+be calculated using different processor northbridge function
+registers:
+
+* BasePwrWatts:
+ Specifies in watts the maximum amount of power
+ consumed by the processor for NB and logic external to the core.
+
+* ProcessorPwrWatts:
+ Specifies in watts the maximum amount of power
+ the processor can support.
+* CurrPwrWatts:
+ Specifies in watts the current amount of power being
+ consumed by the processor.
+
+This driver provides ProcessorPwrWatts and CurrPwrWatts:
+
+* power1_crit (ProcessorPwrWatts)
+* power1_input (CurrPwrWatts)
+
+On multi-node processors the calculated value is for the entire
+package and not for a single node. Thus the driver creates sysfs
+attributes only for internal node0 of a multi-node processor.
+
+2) Accumulated Power Mechanism
+
+This driver also introduces an algorithm that should be used to
+calculate the average power consumed by a processor during a
+measurement interval Tm. The feature of accumulated power mechanism is
+indicated by CPUID Fn8000_0007_EDX[12].
+
+* Tsample:
+ compute unit power accumulator sample period
+
+* Tref:
+ the PTSC counter period
+
+* PTSC:
+ performance timestamp counter
+
+* N:
+ the ratio of compute unit power accumulator sample period to the
+ PTSC period
+
+* Jmax:
+ max compute unit accumulated power which is indicated by
+ MaxCpuSwPwrAcc MSR C001007b
+
+* Jx/Jy:
+ compute unit accumulated power which is indicated by
+ CpuSwPwrAcc MSR C001007a
+* Tx/Ty:
+ the value of performance timestamp counter which is indicated
+ by CU_PTSC MSR C0010280
+
+* PwrCPUave:
+ CPU average power
+
+i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007.
+
+ N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]].
+
+ii. Read the full range of the cumulative energy value from the new
+ MSR MaxCpuSwPwrAcc.
+
+ Jmax = value returned.
+
+iii. At time x, SW reads CpuSwPwrAcc MSR and samples the PTSC.
+
+ Jx = value read from CpuSwPwrAcc and Tx = value read from PTSC.
+
+iv. At time y, SW reads CpuSwPwrAcc MSR and samples the PTSC.
+
+ Jy = value read from CpuSwPwrAcc and Ty = value read from PTSC.
+
+v. Calculate the average power consumption for a compute unit over
+ time period (y-x). Unit of result is uWatt::
+
+ if (Jy < Jx) // Rollover has occurred
+ Jdelta = (Jy + Jmax) - Jx
+ else
+ Jdelta = Jy - Jx
+ PwrCPUave = N * Jdelta * 1000 / (Ty - Tx)
+
+This driver provides PwrCPUave and interval(default is 10 millisecond
+and maximum is 1 second):
+
+* power1_average (PwrCPUave)
+* power1_average_interval (Interval)
+
+The power1_average_interval can be updated at /etc/sensors3.conf file
+as below:
+
+chip `fam15h_power-*`
+ set power1_average_interval 0.01
+
+Then save it with "sensors -s".
diff --git a/Documentation/hwmon/fsp-3y.rst b/Documentation/hwmon/fsp-3y.rst
new file mode 100644
index 000000000..5693d83a2
--- /dev/null
+++ b/Documentation/hwmon/fsp-3y.rst
@@ -0,0 +1,28 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver fsp3y
+======================
+Supported devices:
+ * 3Y POWER YH-5151E
+ * 3Y POWER YM-2151E
+
+Author: Václav Kubernát <kubernat@cesnet.cz>
+
+Description
+-----------
+This driver implements limited support for two 3Y POWER devices.
+
+Sysfs entries
+-------------
+ * in1_input input voltage
+ * in2_input 12V output voltage
+ * in3_input 5V output voltage
+ * curr1_input input current
+ * curr2_input 12V output current
+ * curr3_input 5V output current
+ * fan1_input fan rpm
+ * temp1_input temperature 1
+ * temp2_input temperature 2
+ * temp3_input temperature 3
+ * power1_input input power
+ * power2_input output power
diff --git a/Documentation/hwmon/ftsteutates.rst b/Documentation/hwmon/ftsteutates.rst
new file mode 100644
index 000000000..198fa8e28
--- /dev/null
+++ b/Documentation/hwmon/ftsteutates.rst
@@ -0,0 +1,37 @@
+Kernel driver ftsteutates
+=========================
+
+Supported chips:
+
+ * FTS Teutates
+
+ Prefix: 'ftsteutates'
+
+ Addresses scanned: I2C 0x73 (7-Bit)
+
+Author: Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>
+
+
+Description
+-----------
+
+The BMC Teutates is the Eleventh generation of Superior System
+monitoring and thermal management solution. It is builds on the basic
+functionality of the BMC Theseus and contains several new features and
+enhancements. It can monitor up to 4 voltages, 16 temperatures and
+8 fans. It also contains an integrated watchdog which is currently
+implemented in this driver.
+
+The 4 voltages require a board-specific multiplier, since the BMC can
+only measure voltages up to 3.3V and thus relies on voltage dividers.
+Consult your motherboard manual for details.
+
+To clear a temperature or fan alarm, execute the following command with the
+correct path to the alarm file::
+
+ echo 0 >XXXX_alarm
+
+Specification of the chip can be found here:
+
+- ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
+- ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf
diff --git a/Documentation/hwmon/g760a.rst b/Documentation/hwmon/g760a.rst
new file mode 100644
index 000000000..d82952cc8
--- /dev/null
+++ b/Documentation/hwmon/g760a.rst
@@ -0,0 +1,40 @@
+Kernel driver g760a
+===================
+
+Supported chips:
+
+ * Global Mixed-mode Technology Inc. G760A
+
+ Prefix: 'g760a'
+
+ Datasheet: Publicly available at the GMT website
+
+ http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
+
+Author: Herbert Valerio Riedel <hvr@gnu.org>
+
+Description
+-----------
+
+The GMT G760A Fan Speed PWM Controller is connected directly to a fan
+and performs closed-loop control of the fan speed.
+
+The fan speed is programmed by setting the period via 'pwm1' of two
+consecutive speed pulses. The period is defined in terms of clock
+cycle counts of an assumed 32kHz clock source.
+
+Setting a period of 0 stops the fan; setting the period to 255 sets
+fan to maximum speed.
+
+The measured fan rotation speed returned via 'fan1_input' is derived
+from the measured speed pulse period by assuming again a 32kHz clock
+source and a 2 pulse-per-revolution fan.
+
+The 'alarms' file provides access to the two alarm bits provided by
+the G760A chip's status register: Bit 0 is set when the actual fan
+speed differs more than 20% with respect to the programmed fan speed;
+bit 1 is set when fan speed is below 1920 RPM.
+
+The g760a driver will not update its values more frequently than every
+other second; reading them more often will do no harm, but will return
+'old' values.
diff --git a/Documentation/hwmon/g762.rst b/Documentation/hwmon/g762.rst
new file mode 100644
index 000000000..0371b3365
--- /dev/null
+++ b/Documentation/hwmon/g762.rst
@@ -0,0 +1,74 @@
+Kernel driver g762
+==================
+
+The GMT G762 Fan Speed PWM Controller is connected directly to a fan
+and performs closed-loop or open-loop control of the fan speed. Two
+modes - PWM or DC - are supported by the device.
+
+For additional information, a detailed datasheet is available at
+http://natisbad.org/NAS/ref/GMT_EDS-762_763-080710-0.2.pdf. sysfs
+bindings are described in Documentation/hwmon/sysfs-interface.rst.
+
+The following entries are available to the user in a subdirectory of
+/sys/bus/i2c/drivers/g762/ to control the operation of the device.
+This can be done manually using the following entries but is usually
+done via a userland daemon like fancontrol.
+
+Note that those entries do not provide ways to setup the specific
+hardware characteristics of the system (reference clock, pulses per
+fan revolution, ...); Those can be modified via devicetree bindings
+documented in Documentation/devicetree/bindings/hwmon/g762.txt or
+using a specific platform_data structure in board initialization
+file (see include/linux/platform_data/g762.h).
+
+ fan1_target:
+ set desired fan speed. This only makes sense in closed-loop
+ fan speed control (i.e. when pwm1_enable is set to 2).
+
+ fan1_input:
+ provide current fan rotation value in RPM as reported by
+ the fan to the device.
+
+ fan1_div:
+ fan clock divisor. Supported value are 1, 2, 4 and 8.
+
+ fan1_pulses:
+ number of pulses per fan revolution. Supported values
+ are 2 and 4.
+
+ fan1_fault:
+ reports fan failure, i.e. no transition on fan gear pin for
+ about 0.7s (if the fan is not voluntarily set off).
+
+ fan1_alarm:
+ in closed-loop control mode, if fan RPM value is 25% out
+ of the programmed value for over 6 seconds 'fan1_alarm' is
+ set to 1.
+
+ pwm1_enable:
+ set current fan speed control mode i.e. 1 for manual fan
+ speed control (open-loop) via pwm1 described below, 2 for
+ automatic fan speed control (closed-loop) via fan1_target
+ above.
+
+ pwm1_mode:
+ set or get fan driving mode: 1 for PWM mode, 0 for DC mode.
+
+ pwm1:
+ get or set PWM fan control value in open-loop mode. This is an
+ integer value between 0 and 255. 0 stops the fan, 255 makes
+ it run at full speed.
+
+Both in PWM mode ('pwm1_mode' set to 1) and DC mode ('pwm1_mode' set to 0),
+when current fan speed control mode is open-loop ('pwm1_enable' set to 1),
+the fan speed is programmed by setting a value between 0 and 255 via 'pwm1'
+entry (0 stops the fan, 255 makes it run at full speed). In closed-loop mode
+('pwm1_enable' set to 2), the expected rotation speed in RPM can be passed to
+the chip via 'fan1_target'. In closed-loop mode, the target speed is compared
+with current speed (available via 'fan1_input') by the device and a feedback
+is performed to match that target value. The fan speed value is computed
+based on the parameters associated with the physical characteristics of the
+system: a reference clock source frequency, a number of pulses per fan
+revolution, etc.
+
+Note that the driver will update its values at most once per second.
diff --git a/Documentation/hwmon/gl518sm.rst b/Documentation/hwmon/gl518sm.rst
new file mode 100644
index 000000000..bf1e0b5e8
--- /dev/null
+++ b/Documentation/hwmon/gl518sm.rst
@@ -0,0 +1,80 @@
+Kernel driver gl518sm
+=====================
+
+Supported chips:
+
+ * Genesys Logic GL518SM release 0x00
+
+ Prefix: 'gl518sm'
+
+ Addresses scanned: I2C 0x2c and 0x2d
+
+ * Genesys Logic GL518SM release 0x80
+
+ Prefix: 'gl518sm'
+
+ Addresses scanned: I2C 0x2c and 0x2d
+
+ Datasheet: http://www.genesyslogic.com/
+
+Authors:
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Kyösti Mälkki <kmalkki@cc.hut.fi>
+ - Hong-Gunn Chew <hglinux@gunnet.org>
+ - Jean Delvare <jdelvare@suse.de>
+
+Description
+-----------
+
+.. important::
+
+ For the revision 0x00 chip, the in0, in1, and in2 values (+5V, +3V,
+ and +12V) CANNOT be read. This is a limitation of the chip, not the driver.
+
+This driver supports the Genesys Logic GL518SM chip. There are at least
+two revision of this chip, which we call revision 0x00 and 0x80. Revision
+0x80 chips support the reading of all voltages and revision 0x00 only
+for VIN3.
+
+The GL518SM implements one temperature sensor, two fan rotation speed
+sensors, and four voltage sensors. It can report alarms through the
+computer speakers.
+
+Temperatures are measured in degrees Celsius. An alarm goes off while the
+temperature is above the over temperature limit, and has not yet dropped
+below the hysteresis limit. The alarm always reflects the current
+situation. Measurements are guaranteed between -10 degrees and +110
+degrees, with a accuracy of +/-3 degrees.
+
+Rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. In
+case when you have selected to turn fan1 off, no fan1 alarm is triggered.
+
+Fan readings can be divided by a programmable divider (1, 2, 4 or 8) to
+give the readings more range or accuracy. Not all RPM values can
+accurately be represented, so some rounding is done. With a divider
+of 2, the lowest representable value is around 1900 RPM.
+
+Voltage sensors (also known as VIN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum or
+maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. The VDD input
+measures voltages between 0.000 and 5.865 volt, with a resolution of 0.023
+volt. The other inputs measure voltages between 0.000 and 4.845 volt, with
+a resolution of 0.019 volt. Note that revision 0x00 chips do not support
+reading the current voltage of any input except for VIN3; limit setting and
+alarms work fine, though.
+
+When an alarm is triggered, you can be warned by a beeping signal through your
+computer speaker. It is possible to enable all beeping globally, or only the
+beeping for some alarms.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once (except for temperature alarms). This means that the
+cause for the alarm may already have disappeared! Note that in the current
+implementation, all hardware registers are read whenever any data is read
+(unless it is less than 1.5 seconds since the last update). This means that
+you can easily miss once-only alarms.
+
+The GL518SM only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
diff --git a/Documentation/hwmon/gsc-hwmon.rst b/Documentation/hwmon/gsc-hwmon.rst
new file mode 100644
index 000000000..ffac392a7
--- /dev/null
+++ b/Documentation/hwmon/gsc-hwmon.rst
@@ -0,0 +1,53 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver gsc-hwmon
+=======================
+
+Supported chips: Gateworks GSC
+Datasheet: http://trac.gateworks.com/wiki/gsc
+Author: Tim Harvey <tharvey@gateworks.com>
+
+Description:
+------------
+
+This driver supports hardware monitoring for the temperature sensor,
+various ADC's connected to the GSC, and optional FAN controller available
+on some boards.
+
+
+Voltage Monitoring
+------------------
+
+The voltage inputs are scaled either internally or by the driver depending
+on the GSC version and firmware. The values returned by the driver do not need
+further scaling. The voltage input labels provide the voltage rail name:
+
+inX_input Measured voltage (mV).
+inX_label Name of voltage rail.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are measured with 12-bit or 10-bit resolution and are scaled
+either internally or by the driver depending on the GSC version and firmware.
+The values returned by the driver reflect millidegree Celcius:
+
+tempX_input Measured temperature.
+tempX_label Name of temperature input.
+
+
+PWM Output Control
+------------------
+
+The GSC features 1 PWM output that operates in automatic mode where the
+PWM value will be scalled depending on 6 temperature boundaries.
+The tempeature boundaries are read-write and in millidegree Celcius and the
+read-only PWM values range from 0 (off) to 255 (full speed).
+Fan speed will be set to minimum (off) when the temperature sensor reads
+less than pwm1_auto_point1_temp and maximum when the temperature sensor
+equals or exceeds pwm1_auto_point6_temp.
+
+pwm1_auto_point[1-6]_pwm PWM value.
+pwm1_auto_point[1-6]_temp Temperature boundary.
+
diff --git a/Documentation/hwmon/hih6130.rst b/Documentation/hwmon/hih6130.rst
new file mode 100644
index 000000000..e95d373eb
--- /dev/null
+++ b/Documentation/hwmon/hih6130.rst
@@ -0,0 +1,45 @@
+Kernel driver hih6130
+=====================
+
+Supported chips:
+
+ * Honeywell HIH-6130 / HIH-6131
+
+ Prefix: 'hih6130'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Honeywell website
+
+ http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872
+
+Author:
+ Iain Paton <ipaton0@gmail.com>
+
+Description
+-----------
+
+The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package.
+The difference between the two devices is that the HIH-6131 has a condensation
+filter.
+
+The devices communicate with the I2C protocol. All sensors are set to the same
+I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27)
+can be used in the board setup code.
+
+Please see Documentation/i2c/instantiating-devices.rst for details on how to
+instantiate I2C devices.
+
+sysfs-Interface
+---------------
+
+temp1_input
+ temperature input
+
+humidity1_input
+ humidity input
+
+Notes
+-----
+
+Command mode and alarms are not currently supported.
diff --git a/Documentation/hwmon/hwmon-kernel-api.rst b/Documentation/hwmon/hwmon-kernel-api.rst
new file mode 100644
index 000000000..f3276b3a3
--- /dev/null
+++ b/Documentation/hwmon/hwmon-kernel-api.rst
@@ -0,0 +1,402 @@
+The Linux Hardware Monitoring kernel API
+========================================
+
+Guenter Roeck
+
+Introduction
+------------
+
+This document describes the API that can be used by hardware monitoring
+drivers that want to use the hardware monitoring framework.
+
+This document does not describe what a hardware monitoring (hwmon) Driver or
+Device is. It also does not describe the API which can be used by user space
+to communicate with a hardware monitoring device. If you want to know this
+then please read the following file: Documentation/hwmon/sysfs-interface.rst.
+
+For additional guidelines on how to write and improve hwmon drivers, please
+also read Documentation/hwmon/submitting-patches.rst.
+
+The API
+-------
+Each hardware monitoring driver must #include <linux/hwmon.h> and, in most
+cases, <linux/hwmon-sysfs.h>. linux/hwmon.h declares the following
+register/unregister functions::
+
+ struct device *
+ hwmon_device_register_with_groups(struct device *dev, const char *name,
+ void *drvdata,
+ const struct attribute_group **groups);
+
+ struct device *
+ devm_hwmon_device_register_with_groups(struct device *dev,
+ const char *name, void *drvdata,
+ const struct attribute_group **groups);
+
+ struct device *
+ hwmon_device_register_with_info(struct device *dev,
+ const char *name, void *drvdata,
+ const struct hwmon_chip_info *info,
+ const struct attribute_group **extra_groups);
+
+ struct device *
+ devm_hwmon_device_register_with_info(struct device *dev,
+ const char *name,
+ void *drvdata,
+ const struct hwmon_chip_info *info,
+ const struct attribute_group **extra_groups);
+
+ void hwmon_device_unregister(struct device *dev);
+
+ void devm_hwmon_device_unregister(struct device *dev);
+
+ char *hwmon_sanitize_name(const char *name);
+
+ char *devm_hwmon_sanitize_name(struct device *dev, const char *name);
+
+hwmon_device_register_with_groups registers a hardware monitoring device.
+The first parameter of this function is a pointer to the parent device.
+The name parameter is a pointer to the hwmon device name. The registration
+function wil create a name sysfs attribute pointing to this name.
+The drvdata parameter is the pointer to the local driver data.
+hwmon_device_register_with_groups will attach this pointer to the newly
+allocated hwmon device. The pointer can be retrieved by the driver using
+dev_get_drvdata() on the hwmon device pointer. The groups parameter is
+a pointer to a list of sysfs attribute groups. The list must be NULL terminated.
+hwmon_device_register_with_groups creates the hwmon device with name attribute
+as well as all sysfs attributes attached to the hwmon device.
+This function returns a pointer to the newly created hardware monitoring device
+or PTR_ERR for failure.
+
+devm_hwmon_device_register_with_groups is similar to
+hwmon_device_register_with_groups. However, it is device managed, meaning the
+hwmon device does not have to be removed explicitly by the removal function.
+
+hwmon_device_register_with_info is the most comprehensive and preferred means
+to register a hardware monitoring device. It creates the standard sysfs
+attributes in the hardware monitoring core, letting the driver focus on reading
+from and writing to the chip instead of having to bother with sysfs attributes.
+The parent device parameter as well as the chip parameter must not be NULL. Its
+parameters are described in more detail below.
+
+devm_hwmon_device_register_with_info is similar to
+hwmon_device_register_with_info. However, it is device managed, meaning the
+hwmon device does not have to be removed explicitly by the removal function.
+
+hwmon_device_unregister deregisters a registered hardware monitoring device.
+The parameter of this function is the pointer to the registered hardware
+monitoring device structure. This function must be called from the driver
+remove function if the hardware monitoring device was registered with
+hwmon_device_register_with_groups or hwmon_device_register_with_info.
+
+devm_hwmon_device_unregister does not normally have to be called. It is only
+needed for error handling, and only needed if the driver probe fails after
+the call to devm_hwmon_device_register_with_groups or
+hwmon_device_register_with_info and if the automatic (device managed)
+removal would be too late.
+
+All supported hwmon device registration functions only accept valid device
+names. Device names including invalid characters (whitespace, '*', or '-')
+will be rejected. The 'name' parameter is mandatory.
+
+If the driver doesn't use a static device name (for example it uses
+dev_name()), and therefore cannot make sure the name only contains valid
+characters, hwmon_sanitize_name can be used. This convenience function
+will duplicate the string and replace any invalid characters with an
+underscore. It will allocate memory for the new string and it is the
+responsibility of the caller to release the memory when the device is
+removed.
+
+devm_hwmon_sanitize_name is the resource managed version of
+hwmon_sanitize_name; the memory will be freed automatically on device
+removal.
+
+Using devm_hwmon_device_register_with_info()
+--------------------------------------------
+
+hwmon_device_register_with_info() registers a hardware monitoring device.
+The parameters to this function are
+
+=============================================== ===============================================
+`struct device *dev` Pointer to parent device
+`const char *name` Device name
+`void *drvdata` Driver private data
+`const struct hwmon_chip_info *info` Pointer to chip description.
+`const struct attribute_group **extra_groups` Null-terminated list of additional non-standard
+ sysfs attribute groups.
+=============================================== ===============================================
+
+This function returns a pointer to the created hardware monitoring device
+on success and a negative error code for failure.
+
+The hwmon_chip_info structure looks as follows::
+
+ struct hwmon_chip_info {
+ const struct hwmon_ops *ops;
+ const struct hwmon_channel_info **info;
+ };
+
+It contains the following fields:
+
+* ops:
+ Pointer to device operations.
+* info:
+ NULL-terminated list of device channel descriptors.
+
+The list of hwmon operations is defined as::
+
+ struct hwmon_ops {
+ umode_t (*is_visible)(const void *, enum hwmon_sensor_types type,
+ u32 attr, int);
+ int (*read)(struct device *, enum hwmon_sensor_types type,
+ u32 attr, int, long *);
+ int (*write)(struct device *, enum hwmon_sensor_types type,
+ u32 attr, int, long);
+ };
+
+It defines the following operations.
+
+* is_visible:
+ Pointer to a function to return the file mode for each supported
+ attribute. This function is mandatory.
+
+* read:
+ Pointer to a function for reading a value from the chip. This function
+ is optional, but must be provided if any readable attributes exist.
+
+* write:
+ Pointer to a function for writing a value to the chip. This function is
+ optional, but must be provided if any writeable attributes exist.
+
+Each sensor channel is described with struct hwmon_channel_info, which is
+defined as follows::
+
+ struct hwmon_channel_info {
+ enum hwmon_sensor_types type;
+ u32 *config;
+ };
+
+It contains following fields:
+
+* type:
+ The hardware monitoring sensor type.
+
+ Supported sensor types are
+
+ ================== ==================================================
+ hwmon_chip A virtual sensor type, used to describe attributes
+ which are not bound to a specific input or output
+ hwmon_temp Temperature sensor
+ hwmon_in Voltage sensor
+ hwmon_curr Current sensor
+ hwmon_power Power sensor
+ hwmon_energy Energy sensor
+ hwmon_humidity Humidity sensor
+ hwmon_fan Fan speed sensor
+ hwmon_pwm PWM control
+ ================== ==================================================
+
+* config:
+ Pointer to a 0-terminated list of configuration values for each
+ sensor of the given type. Each value is a combination of bit values
+ describing the attributes supposed by a single sensor.
+
+As an example, here is the complete description file for a LM75 compatible
+sensor chip. The chip has a single temperature sensor. The driver wants to
+register with the thermal subsystem (HWMON_C_REGISTER_TZ), and it supports
+the update_interval attribute (HWMON_C_UPDATE_INTERVAL). The chip supports
+reading the temperature (HWMON_T_INPUT), it has a maximum temperature
+register (HWMON_T_MAX) as well as a maximum temperature hysteresis register
+(HWMON_T_MAX_HYST)::
+
+ static const u32 lm75_chip_config[] = {
+ HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL,
+ 0
+ };
+
+ static const struct hwmon_channel_info lm75_chip = {
+ .type = hwmon_chip,
+ .config = lm75_chip_config,
+ };
+
+ static const u32 lm75_temp_config[] = {
+ HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST,
+ 0
+ };
+
+ static const struct hwmon_channel_info lm75_temp = {
+ .type = hwmon_temp,
+ .config = lm75_temp_config,
+ };
+
+ static const struct hwmon_channel_info *lm75_info[] = {
+ &lm75_chip,
+ &lm75_temp,
+ NULL
+ };
+
+ The HWMON_CHANNEL_INFO() macro can and should be used when possible.
+ With this macro, the above example can be simplified to
+
+ static const struct hwmon_channel_info *lm75_info[] = {
+ HWMON_CHANNEL_INFO(chip,
+ HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST),
+ NULL
+ };
+
+ The remaining declarations are as follows.
+
+ static const struct hwmon_ops lm75_hwmon_ops = {
+ .is_visible = lm75_is_visible,
+ .read = lm75_read,
+ .write = lm75_write,
+ };
+
+ static const struct hwmon_chip_info lm75_chip_info = {
+ .ops = &lm75_hwmon_ops,
+ .info = lm75_info,
+ };
+
+A complete list of bit values indicating individual attribute support
+is defined in include/linux/hwmon.h. Definition prefixes are as follows.
+
+=============== =================================================
+HWMON_C_xxxx Chip attributes, for use with hwmon_chip.
+HWMON_T_xxxx Temperature attributes, for use with hwmon_temp.
+HWMON_I_xxxx Voltage attributes, for use with hwmon_in.
+HWMON_C_xxxx Current attributes, for use with hwmon_curr.
+ Notice the prefix overlap with chip attributes.
+HWMON_P_xxxx Power attributes, for use with hwmon_power.
+HWMON_E_xxxx Energy attributes, for use with hwmon_energy.
+HWMON_H_xxxx Humidity attributes, for use with hwmon_humidity.
+HWMON_F_xxxx Fan speed attributes, for use with hwmon_fan.
+HWMON_PWM_xxxx PWM control attributes, for use with hwmon_pwm.
+=============== =================================================
+
+Driver callback functions
+-------------------------
+
+Each driver provides is_visible, read, and write functions. Parameters
+and return values for those functions are as follows::
+
+ umode_t is_visible_func(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+
+Parameters:
+ data:
+ Pointer to device private data structure.
+ type:
+ The sensor type.
+ attr:
+ Attribute identifier associated with a specific attribute.
+ For example, the attribute value for HWMON_T_INPUT would be
+ hwmon_temp_input. For complete mappings of bit fields to
+ attribute values please see include/linux/hwmon.h.
+ channel:
+ The sensor channel number.
+
+Return value:
+ The file mode for this attribute. Typically, this will be 0 (the
+ attribute will not be created), S_IRUGO, or 'S_IRUGO | S_IWUSR'.
+
+::
+
+ int read_func(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+
+Parameters:
+ dev:
+ Pointer to the hardware monitoring device.
+ type:
+ The sensor type.
+ attr:
+ Attribute identifier associated with a specific attribute.
+ For example, the attribute value for HWMON_T_INPUT would be
+ hwmon_temp_input. For complete mappings please see
+ include/linux/hwmon.h.
+ channel:
+ The sensor channel number.
+ val:
+ Pointer to attribute value.
+
+Return value:
+ 0 on success, a negative error number otherwise.
+
+::
+
+ int write_func(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+
+Parameters:
+ dev:
+ Pointer to the hardware monitoring device.
+ type:
+ The sensor type.
+ attr:
+ Attribute identifier associated with a specific attribute.
+ For example, the attribute value for HWMON_T_INPUT would be
+ hwmon_temp_input. For complete mappings please see
+ include/linux/hwmon.h.
+ channel:
+ The sensor channel number.
+ val:
+ The value to write to the chip.
+
+Return value:
+ 0 on success, a negative error number otherwise.
+
+
+Driver-provided sysfs attributes
+--------------------------------
+
+If the hardware monitoring device is registered with
+hwmon_device_register_with_info or devm_hwmon_device_register_with_info,
+it is most likely not necessary to provide sysfs attributes. Only additional
+non-standard sysfs attributes need to be provided when one of those registration
+functions is used.
+
+The header file linux/hwmon-sysfs.h provides a number of useful macros to
+declare and use hardware monitoring sysfs attributes.
+
+In many cases, you can use the exsting define DEVICE_ATTR or its variants
+DEVICE_ATTR_{RW,RO,WO} to declare such attributes. This is feasible if an
+attribute has no additional context. However, in many cases there will be
+additional information such as a sensor index which will need to be passed
+to the sysfs attribute handling function.
+
+SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 can be used to define attributes
+which need such additional context information. SENSOR_DEVICE_ATTR requires
+one additional argument, SENSOR_DEVICE_ATTR_2 requires two.
+
+Simplified variants of SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 are available
+and should be used if standard attribute permissions and function names are
+feasible. Standard permissions are 0644 for SENSOR_DEVICE_ATTR[_2]_RW,
+0444 for SENSOR_DEVICE_ATTR[_2]_RO, and 0200 for SENSOR_DEVICE_ATTR[_2]_WO.
+Standard functions, similar to DEVICE_ATTR_{RW,RO,WO}, have _show and _store
+appended to the provided function name.
+
+SENSOR_DEVICE_ATTR and its variants define a struct sensor_device_attribute
+variable. This structure has the following fields::
+
+ struct sensor_device_attribute {
+ struct device_attribute dev_attr;
+ int index;
+ };
+
+You can use to_sensor_dev_attr to get the pointer to this structure from the
+attribute read or write function. Its parameter is the device to which the
+attribute is attached.
+
+SENSOR_DEVICE_ATTR_2 and its variants define a struct sensor_device_attribute_2
+variable, which is defined as follows::
+
+ struct sensor_device_attribute_2 {
+ struct device_attribute dev_attr;
+ u8 index;
+ u8 nr;
+ };
+
+Use to_sensor_dev_attr_2 to get the pointer to this structure. Its parameter
+is the device to which the attribute is attached.
diff --git a/Documentation/hwmon/ibm-cffps.rst b/Documentation/hwmon/ibm-cffps.rst
new file mode 100644
index 000000000..ef8f3f806
--- /dev/null
+++ b/Documentation/hwmon/ibm-cffps.rst
@@ -0,0 +1,57 @@
+Kernel driver ibm-cffps
+=======================
+
+Supported chips:
+
+ * IBM Common Form Factor power supply
+
+Author: Eddie James <eajames@us.ibm.com>
+
+Description
+-----------
+
+This driver supports IBM Common Form Factor (CFF) power supplies. This driver
+is a client to the core PMBus driver.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported:
+
+======================= ======================================================
+curr1_alarm Output current over-current alarm.
+curr1_input Measured output current in mA.
+curr1_label "iout1"
+
+fan1_alarm Fan 1 warning.
+fan1_fault Fan 1 fault.
+fan1_input Fan 1 speed in RPM.
+fan2_alarm Fan 2 warning.
+fan2_fault Fan 2 fault.
+fan2_input Fan 2 speed in RPM.
+
+in1_alarm Input voltage under-voltage alarm.
+in1_input Measured input voltage in mV.
+in1_label "vin"
+in2_alarm Output voltage over-voltage alarm.
+in2_input Measured output voltage in mV.
+in2_label "vout1"
+
+power1_alarm Input fault or alarm.
+power1_input Measured input power in uW.
+power1_label "pin"
+
+temp1_alarm PSU inlet ambient temperature over-temperature alarm.
+temp1_input Measured PSU inlet ambient temp in millidegrees C.
+temp2_alarm Secondary rectifier temp over-temperature alarm.
+temp2_input Measured secondary rectifier temp in millidegrees C.
+temp3_alarm ORing FET temperature over-temperature alarm.
+temp3_input Measured ORing FET temperature in millidegrees C.
+======================= ======================================================
diff --git a/Documentation/hwmon/ibmaem.rst b/Documentation/hwmon/ibmaem.rst
new file mode 100644
index 000000000..f07a14a1c
--- /dev/null
+++ b/Documentation/hwmon/ibmaem.rst
@@ -0,0 +1,44 @@
+Kernel driver ibmaem
+====================
+
+This driver talks to the IBM Systems Director Active Energy Manager, known
+henceforth as AEM.
+
+Supported systems:
+
+ * Any recent IBM System X server with AEM support.
+
+ This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
+ x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades.
+
+ The IPMI host interface
+ driver ("ipmi-si") needs to be loaded for this driver to do anything.
+
+ Prefix: 'ibmaem'
+
+ Datasheet: Not available
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements sensor reading support for the energy and power meters
+available on various IBM System X hardware through the BMC. All sensor banks
+will be exported as platform devices; this driver can talk to both v1 and v2
+interfaces. This driver is completely separate from the older ibmpex driver.
+
+The v1 AEM interface has a simple set of features to monitor energy use. There
+is a register that displays an estimate of raw energy consumption since the
+last BMC reset, and a power sensor that returns average power use over a
+configurable interval.
+
+The v2 AEM interface is a bit more sophisticated, being able to present a wider
+range of energy and power use registers, the power cap as set by the AEM
+software, and temperature sensors.
+
+Special Features
+----------------
+
+The "power_cap" value displays the current system power cap, as set by the AEM
+software. Setting the power cap from the host is not currently supported.
diff --git a/Documentation/hwmon/ibmpowernv.rst b/Documentation/hwmon/ibmpowernv.rst
new file mode 100644
index 000000000..5d642bc3d
--- /dev/null
+++ b/Documentation/hwmon/ibmpowernv.rst
@@ -0,0 +1,87 @@
+Kernel Driver IBMPOWERNV
+========================
+
+Supported systems:
+
+ * Any recent IBM P servers based on POWERNV platform
+
+Author: Neelesh Gupta
+
+Description
+-----------
+
+This driver implements reading the platform sensors data like temperature/fan/
+voltage/power for 'POWERNV' platform.
+
+The driver uses the platform device infrastructure. It probes the device tree
+for sensor devices during the __init phase and registers them with the 'hwmon'.
+'hwmon' populates the 'sysfs' tree having attribute files, each for a given
+sensor type and its attribute data.
+
+All the nodes in the DT appear under "/ibm,opal/sensors" and each valid node in
+the DT maps to an attribute file in 'sysfs'. The node exports unique 'sensor-id'
+which the driver uses to make an OPAL call to the firmware.
+
+Usage notes
+-----------
+The driver is built statically with the kernel by enabling the config
+CONFIG_SENSORS_IBMPOWERNV. It can also be built as module 'ibmpowernv'.
+
+Sysfs attributes
+----------------
+
+======================= =======================================================
+fanX_input Measured RPM value.
+fanX_min Threshold RPM for alert generation.
+fanX_fault - 0: No fail condition
+ - 1: Failing fan
+
+tempX_input Measured ambient temperature.
+tempX_max Threshold ambient temperature for alert generation.
+tempX_highest Historical maximum temperature
+tempX_lowest Historical minimum temperature
+tempX_enable Enable/disable all temperature sensors belonging to the
+ sub-group. In POWER9, this attribute corresponds to
+ each OCC. Using this attribute each OCC can be asked to
+ disable/enable all of its temperature sensors.
+
+ - 1: Enable
+ - 0: Disable
+
+inX_input Measured power supply voltage (millivolt)
+inX_fault - 0: No fail condition.
+ - 1: Failing power supply.
+inX_highest Historical maximum voltage
+inX_lowest Historical minimum voltage
+inX_enable Enable/disable all voltage sensors belonging to the
+ sub-group. In POWER9, this attribute corresponds to
+ each OCC. Using this attribute each OCC can be asked to
+ disable/enable all of its voltage sensors.
+
+ - 1: Enable
+ - 0: Disable
+
+powerX_input Power consumption (microWatt)
+powerX_input_highest Historical maximum power
+powerX_input_lowest Historical minimum power
+powerX_enable Enable/disable all power sensors belonging to the
+ sub-group. In POWER9, this attribute corresponds to
+ each OCC. Using this attribute each OCC can be asked to
+ disable/enable all of its power sensors.
+
+ - 1: Enable
+ - 0: Disable
+
+currX_input Measured current (milliampere)
+currX_highest Historical maximum current
+currX_lowest Historical minimum current
+currX_enable Enable/disable all current sensors belonging to the
+ sub-group. In POWER9, this attribute corresponds to
+ each OCC. Using this attribute each OCC can be asked to
+ disable/enable all of its current sensors.
+
+ - 1: Enable
+ - 0: Disable
+
+energyX_input Cumulative energy (microJoule)
+======================= =======================================================
diff --git a/Documentation/hwmon/ina209.rst b/Documentation/hwmon/ina209.rst
new file mode 100644
index 000000000..162256131
--- /dev/null
+++ b/Documentation/hwmon/ina209.rst
@@ -0,0 +1,99 @@
+Kernel driver ina209
+====================
+
+Supported chips:
+
+ * Burr-Brown / Texas Instruments INA209
+
+ Prefix: 'ina209'
+
+ Addresses scanned: -
+
+ Datasheet:
+ https://www.ti.com/lit/gpn/ina209
+
+Author:
+ - Paul Hays <Paul.Hays@cattail.ca>
+ - Ira W. Snyder <iws@ovro.caltech.edu>
+ - Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+The TI / Burr-Brown INA209 monitors voltage, current, and power on the high side
+of a D.C. power supply. It can perform measurements and calculations in the
+background to supply readings at any time. It includes a programmable
+calibration multiplier to scale the displayed current and power values.
+
+
+Sysfs entries
+-------------
+
+The INA209 chip is highly configurable both via hardwiring and via
+the I2C bus. See the datasheet for details.
+
+This tries to expose most monitoring features of the hardware via
+sysfs. It does not support every feature of this chip.
+
+======================= =======================================================
+in0_input shunt voltage (mV)
+in0_input_highest shunt voltage historical maximum reading (mV)
+in0_input_lowest shunt voltage historical minimum reading (mV)
+in0_reset_history reset shunt voltage history
+in0_max shunt voltage max alarm limit (mV)
+in0_min shunt voltage min alarm limit (mV)
+in0_crit_max shunt voltage crit max alarm limit (mV)
+in0_crit_min shunt voltage crit min alarm limit (mV)
+in0_max_alarm shunt voltage max alarm limit exceeded
+in0_min_alarm shunt voltage min alarm limit exceeded
+in0_crit_max_alarm shunt voltage crit max alarm limit exceeded
+in0_crit_min_alarm shunt voltage crit min alarm limit exceeded
+
+in1_input bus voltage (mV)
+in1_input_highest bus voltage historical maximum reading (mV)
+in1_input_lowest bus voltage historical minimum reading (mV)
+in1_reset_history reset bus voltage history
+in1_max bus voltage max alarm limit (mV)
+in1_min bus voltage min alarm limit (mV)
+in1_crit_max bus voltage crit max alarm limit (mV)
+in1_crit_min bus voltage crit min alarm limit (mV)
+in1_max_alarm bus voltage max alarm limit exceeded
+in1_min_alarm bus voltage min alarm limit exceeded
+in1_crit_max_alarm bus voltage crit max alarm limit exceeded
+in1_crit_min_alarm bus voltage crit min alarm limit exceeded
+
+power1_input power measurement (uW)
+power1_input_highest power historical maximum reading (uW)
+power1_reset_history reset power history
+power1_max power max alarm limit (uW)
+power1_crit power crit alarm limit (uW)
+power1_max_alarm power max alarm limit exceeded
+power1_crit_alarm power crit alarm limit exceeded
+
+curr1_input current measurement (mA)
+
+update_interval data conversion time; affects number of samples used
+ to average results for shunt and bus voltages.
+======================= =======================================================
+
+General Remarks
+---------------
+
+The power and current registers in this chip require that the calibration
+register is programmed correctly before they are used. Normally this is expected
+to be done in the BIOS. In the absence of BIOS programming, the shunt resistor
+voltage can be provided using platform data. The driver uses platform data from
+the ina2xx driver for this purpose. If calibration register data is not provided
+via platform data, the driver checks if the calibration register has been
+programmed (ie has a value not equal to zero). If so, this value is retained.
+Otherwise, a default value reflecting a shunt resistor value of 10 mOhm is
+programmed into the calibration register.
+
+
+Output Pins
+-----------
+
+Output pin programming is a board feature which depends on the BIOS. It is
+outside the scope of a hardware monitoring driver to enable or disable output
+pins.
diff --git a/Documentation/hwmon/ina238.rst b/Documentation/hwmon/ina238.rst
new file mode 100644
index 000000000..d9f479984
--- /dev/null
+++ b/Documentation/hwmon/ina238.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver ina238
+====================
+
+Supported chips:
+
+ * Texas Instruments INA238
+
+ Prefix: 'ina238'
+
+ Addresses: I2C 0x40 - 0x4f
+
+ Datasheet:
+ https://www.ti.com/lit/gpn/ina238
+
+Author: Nathan Rossi <nathan.rossi@digi.com>
+
+Description
+-----------
+
+The INA238 is a current shunt, power and temperature monitor with an I2C
+interface. It includes a number of programmable functions including alerts,
+conversion rate, sample averaging and selectable shunt voltage accuracy.
+
+The shunt value in micro-ohms can be set via platform data or device tree at
+compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
+refer to the Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for bindings
+if the device tree is used.
+
+Sysfs entries
+-------------
+
+======================= =======================================================
+in0_input Shunt voltage (mV)
+in0_min Minimum shunt voltage threshold (mV)
+in0_min_alarm Minimum shunt voltage alarm
+in0_max Maximum shunt voltage threshold (mV)
+in0_max_alarm Maximum shunt voltage alarm
+
+in1_input Bus voltage (mV)
+in1_min Minimum bus voltage threshold (mV)
+in1_min_alarm Minimum shunt voltage alarm
+in1_max Maximum bus voltage threshold (mV)
+in1_max_alarm Maximum shunt voltage alarm
+
+power1_input Power measurement (uW)
+power1_max Maximum power threshold (uW)
+power1_max_alarm Maximum power alarm
+
+curr1_input Current measurement (mA)
+
+temp1_input Die temperature measurement (mC)
+temp1_max Maximum die temperature threshold (mC)
+temp1_max_alarm Maximum die temperature alarm
+======================= =======================================================
diff --git a/Documentation/hwmon/ina2xx.rst b/Documentation/hwmon/ina2xx.rst
new file mode 100644
index 000000000..27d2e39bc
--- /dev/null
+++ b/Documentation/hwmon/ina2xx.rst
@@ -0,0 +1,123 @@
+Kernel driver ina2xx
+====================
+
+Supported chips:
+
+ * Texas Instruments INA219
+
+
+ Prefix: 'ina219'
+ Addresses: I2C 0x40 - 0x4f
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/
+
+ * Texas Instruments INA220
+
+ Prefix: 'ina220'
+
+ Addresses: I2C 0x40 - 0x4f
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/
+
+ * Texas Instruments INA226
+
+ Prefix: 'ina226'
+
+ Addresses: I2C 0x40 - 0x4f
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/
+
+ * Texas Instruments INA230
+
+ Prefix: 'ina230'
+
+ Addresses: I2C 0x40 - 0x4f
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/
+
+ * Texas Instruments INA231
+
+ Prefix: 'ina231'
+
+ Addresses: I2C 0x40 - 0x4f
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/
+
+Author: Lothar Felten <lothar.felten@gmail.com>
+
+Description
+-----------
+
+The INA219 is a high-side current shunt and power monitor with an I2C
+interface. The INA219 monitors both shunt drop and supply voltage, with
+programmable conversion times and filtering.
+
+The INA220 is a high or low side current shunt and power monitor with an I2C
+interface. The INA220 monitors both shunt drop and supply voltage.
+
+The INA226 is a current shunt and power monitor with an I2C interface.
+The INA226 monitors both a shunt voltage drop and bus supply voltage.
+
+INA230 and INA231 are high or low side current shunt and power monitors
+with an I2C interface. The chips monitor both a shunt voltage drop and
+bus supply voltage.
+
+The shunt value in micro-ohms can be set via platform data or device tree at
+compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
+refer to the Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml for bindings
+if the device tree is used.
+
+Additionally ina226 supports update_interval attribute as described in
+Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of
+bus and shunt voltage conversion times multiplied by the averaging rate. We
+don't touch the conversion times and only modify the number of averages. The
+lower limit of the update_interval is 2 ms, the upper limit is 2253 ms.
+The actual programmed interval may vary from the desired value.
+
+General sysfs entries
+---------------------
+
+======================= ===============================
+in0_input Shunt voltage(mV) channel
+in1_input Bus voltage(mV) channel
+curr1_input Current(mA) measurement channel
+power1_input Power(uW) measurement channel
+shunt_resistor Shunt resistance(uOhm) channel
+======================= ===============================
+
+Sysfs entries for ina226, ina230 and ina231 only
+------------------------------------------------
+
+======================= ====================================================
+in0_lcrit Critical low shunt voltage
+in0_crit Critical high shunt voltage
+in0_lcrit_alarm Shunt voltage critical low alarm
+in0_crit_alarm Shunt voltage critical high alarm
+in1_lcrit Critical low bus voltage
+in1_crit Critical high bus voltage
+in1_lcrit_alarm Bus voltage critical low alarm
+in1_crit_alarm Bus voltage critical high alarm
+power1_crit Critical high power
+power1_crit_alarm Power critical high alarm
+update_interval data conversion time; affects number of samples used
+ to average results for shunt and bus voltages.
+======================= ====================================================
+
+.. note::
+
+ - Configure `shunt_resistor` before configure `power1_crit`, because power
+ value is calculated based on `shunt_resistor` set.
+ - Because of the underlying register implementation, only one `*crit` setting
+ and its `alarm` can be active. Writing to one `*crit` setting clears other
+ `*crit` settings and alarms. Writing 0 to any `*crit` setting clears all
+ `*crit` settings and alarms.
diff --git a/Documentation/hwmon/ina3221.rst b/Documentation/hwmon/ina3221.rst
new file mode 100644
index 000000000..8c12c54d2
--- /dev/null
+++ b/Documentation/hwmon/ina3221.rst
@@ -0,0 +1,74 @@
+Kernel driver ina3221
+=====================
+
+Supported chips:
+
+ * Texas Instruments INA3221
+
+ Prefix: 'ina3221'
+
+ Addresses: I2C 0x40 - 0x43
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/
+
+Author: Andrew F. Davis <afd@ti.com>
+
+Description
+-----------
+
+The Texas Instruments INA3221 monitors voltage, current, and power on the high
+side of up to three D.C. power supplies. The INA3221 monitors both shunt drop
+and supply voltage, with programmable conversion times and averaging, current
+and power are calculated host-side from these.
+
+Sysfs entries
+-------------
+
+======================= =======================================================
+in[123]_label Voltage channel labels
+in[123]_enable Voltage channel enable controls
+in[123]_input Bus voltage(mV) channels
+curr[123]_input Current(mA) measurement channels
+shunt[123]_resistor Shunt resistance(uOhm) channels
+curr[123]_crit Critical alert current(mA) setting, activates the
+ corresponding alarm when the respective current
+ is above this value
+curr[123]_crit_alarm Critical alert current limit exceeded
+curr[123]_max Warning alert current(mA) setting, activates the
+ corresponding alarm when the respective current
+ average is above this value.
+curr[123]_max_alarm Warning alert current limit exceeded
+in[456]_input Shunt voltage(uV) for channels 1, 2, and 3 respectively
+in7_input Sum of shunt voltage(uV) channels
+in7_label Channel label for sum of shunt voltage
+curr4_input Sum of current(mA) measurement channels,
+ (only available when all channels use the same resistor
+ value for their shunt resistors)
+curr4_crit Critical alert current(mA) setting for sum of current
+ measurements, activates the corresponding alarm
+ when the respective current is above this value
+ (only effective when all channels use the same resistor
+ value for their shunt resistors)
+curr4_crit_alarm Critical alert current limit exceeded for sum of
+ current measurements.
+samples Number of samples using in the averaging mode.
+
+ Supports the list of number of samples:
+
+ 1, 4, 16, 64, 128, 256, 512, 1024
+
+update_interval Data conversion time in millisecond, following:
+
+ update_interval = C x S x (BC + SC)
+
+ * C: number of enabled channels
+ * S: number of samples
+ * BC: bus-voltage conversion time in millisecond
+ * SC: shunt-voltage conversion time in millisecond
+
+ Affects both Bus- and Shunt-voltage conversion time.
+ Note that setting update_interval to 0ms sets both BC
+ and SC to 140 us (minimum conversion time).
+======================= =======================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
new file mode 100644
index 000000000..c1d11cf13
--- /dev/null
+++ b/Documentation/hwmon/index.rst
@@ -0,0 +1,238 @@
+=========================
+Linux Hardware Monitoring
+=========================
+
+.. toctree::
+ :maxdepth: 1
+
+ hwmon-kernel-api
+ pmbus-core
+ inspur-ipsps1
+ submitting-patches
+ sysfs-interface
+ userspace-tools
+
+Hardware Monitoring Kernel Drivers
+==================================
+
+.. toctree::
+ :maxdepth: 1
+
+ abituguru
+ abituguru3
+ acpi_power_meter
+ ad7314
+ adc128d818
+ adm1021
+ adm1025
+ adm1026
+ adm1031
+ adm1177
+ adm1266
+ adm1275
+ adm9240
+ ads7828
+ adt7410
+ adt7411
+ adt7462
+ adt7470
+ adt7475
+ aht10
+ amc6821
+ aquacomputer_d5next
+ asb100
+ asc7621
+ aspeed-pwm-tacho
+ asus_ec_sensors
+ asus_wmi_sensors
+ bcm54140
+ bel-pfe
+ bpa-rs600
+ bt1-pvt
+ coretemp
+ corsair-cpro
+ corsair-psu
+ da9052
+ da9055
+ dell-smm-hwmon
+ dme1737
+ dps920ab
+ drivetemp
+ ds1621
+ ds620
+ emc1403
+ emc2103
+ emc2305
+ emc6w201
+ f71805f
+ f71882fg
+ fam15h_power
+ fsp-3y
+ ftsteutates
+ g760a
+ g762
+ gsc-hwmon
+ gl518sm
+ hih6130
+ ibmaem
+ ibm-cffps
+ ibmpowernv
+ ina209
+ ina2xx
+ ina238
+ ina3221
+ intel-m10-bmc-hwmon
+ ir35221
+ ir38064
+ ir36021
+ isl68137
+ it87
+ jc42
+ k10temp
+ k8temp
+ lan966x
+ lineage-pem
+ lm25066
+ lm63
+ lm70
+ lm73
+ lm75
+ lm77
+ lm78
+ lm80
+ lm83
+ lm85
+ lm87
+ lm90
+ lm92
+ lm93
+ lm95234
+ lm95245
+ lochnagar
+ lt7182s
+ ltc2992
+ ltc2945
+ ltc2947
+ ltc2978
+ ltc2990
+ ltc3815
+ ltc4151
+ ltc4215
+ ltc4245
+ ltc4260
+ ltc4261
+ max127
+ max15301
+ max16064
+ max16065
+ max1619
+ max16601
+ max1668
+ max197
+ max20730
+ max20751
+ max31722
+ max31730
+ max31760
+ max31785
+ max31790
+ max34440
+ max6620
+ max6639
+ max6642
+ max6650
+ max6697
+ max8688
+ mc13783-adc
+ mcp3021
+ menf21bmc
+ mlxreg-fan
+ mp2888
+ mp2975
+ mp5023
+ nct6683
+ nct6775
+ nct7802
+ nct7904
+ npcm750-pwm-fan
+ nsa320
+ ntc_thermistor
+ nzxt-kraken2
+ nzxt-smart2
+ occ
+ pc87360
+ pc87427
+ pcf8591
+ pim4328
+ pli1209bc
+ pm6764tr
+ peci-cputemp
+ peci-dimmtemp
+ pmbus
+ powr1220
+ pxe1610
+ pwm-fan
+ q54sj108a2
+ raspberrypi-hwmon
+ sbrmi
+ sbtsi_temp
+ sch5627
+ sch5636
+ scpi-hwmon
+ sht15
+ sht21
+ sht3x
+ sht4x
+ shtc1
+ sis5595
+ sl28cpld
+ smm665
+ smsc47b397
+ smsc47m192
+ smsc47m1
+ sparx5-temp
+ stpddc60
+ sy7636a-hwmon
+ tc654
+ tc74
+ thmc50
+ tmp102
+ tmp103
+ tmp108
+ tmp401
+ tmp421
+ tmp464
+ tmp513
+ tps23861
+ tps40422
+ tps53679
+ tps546d24
+ twl4030-madc-hwmon
+ ucd9000
+ ucd9200
+ vexpress
+ via686a
+ vt1211
+ w83627ehf
+ w83627hf
+ w83773g
+ w83781d
+ w83791d
+ w83792d
+ w83793
+ w83795
+ w83l785ts
+ w83l786ng
+ wm831x
+ wm8350
+ xgene-hwmon
+ xdpe12284
+ xdpe152c4
+ zl6100
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst
new file mode 100644
index 000000000..4825046ec
--- /dev/null
+++ b/Documentation/hwmon/inspur-ipsps1.rst
@@ -0,0 +1,79 @@
+Kernel driver inspur-ipsps1
+===========================
+
+Supported chips:
+
+ * Inspur Power System power supply unit
+
+Author: John Wang <wangzqbj@inspur.com>
+
+Description
+-----------
+
+This driver supports Inspur Power System power supplies. This driver
+is a client to the core PMBus driver.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported:
+
+======================= ======================================================
+curr1_input Measured input current
+curr1_label "iin"
+curr1_max Maximum current
+curr1_max_alarm Current high alarm
+curr2_input Measured output current in mA.
+curr2_label "iout1"
+curr2_crit Critical maximum current
+curr2_crit_alarm Current critical high alarm
+curr2_max Maximum current
+curr2_max_alarm Current high alarm
+
+fan1_alarm Fan 1 warning.
+fan1_fault Fan 1 fault.
+fan1_input Fan 1 speed in RPM.
+
+in1_alarm Input voltage under-voltage alarm.
+in1_input Measured input voltage in mV.
+in1_label "vin"
+in2_input Measured output voltage in mV.
+in2_label "vout1"
+in2_lcrit Critical minimum output voltage
+in2_lcrit_alarm Output voltage critical low alarm
+in2_max Maximum output voltage
+in2_max_alarm Output voltage high alarm
+in2_min Minimum output voltage
+in2_min_alarm Output voltage low alarm
+
+power1_alarm Input fault or alarm.
+power1_input Measured input power in uW.
+power1_label "pin"
+power1_max Input power limit
+power2_max_alarm Output power high alarm
+power2_max Output power limit
+power2_input Measured output power in uW.
+power2_label "pout"
+
+temp[1-3]_input Measured temperature
+temp[1-2]_max Maximum temperature
+temp[1-3]_max_alarm Temperature high alarm
+
+vendor Manufacturer name
+model Product model
+part_number Product part number
+serial_number Product serial number
+fw_version Firmware version
+hw_version Hardware version
+mode Work mode. Can be set to active or
+ standby, when set to standby, PSU will
+ automatically switch between standby
+ and redundancy mode.
+======================= ======================================================
diff --git a/Documentation/hwmon/intel-m10-bmc-hwmon.rst b/Documentation/hwmon/intel-m10-bmc-hwmon.rst
new file mode 100644
index 000000000..3d148c6e3
--- /dev/null
+++ b/Documentation/hwmon/intel-m10-bmc-hwmon.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver intel-m10-bmc-hwmon
+=================================
+
+Supported chips:
+
+ * Intel MAX 10 BMC for Intel PAC N3000
+
+ Prefix: 'n3000bmc-hwmon'
+
+Author: Xu Yilun <yilun.xu@intel.com>
+
+
+Description
+-----------
+
+This driver adds the temperature, voltage, current and power reading
+support for the Intel MAX 10 Board Management Controller (BMC) chip.
+The BMC chip is integrated in some Intel Programmable Acceleration
+Cards (PAC). It connects to a set of sensor chips to monitor the
+sensor data of different components on the board. The BMC firmware is
+responsible for sensor data sampling and recording in shared
+registers. The host driver reads the sensor data from these shared
+registers and exposes them to users as hwmon interfaces.
+
+The BMC chip is implemented using the Intel MAX 10 CPLD. It could be
+reprogramed to some variants in order to support different Intel
+PACs. The driver is designed to be able to distinguish between the
+variants, but now it only supports the BMC for Intel PAC N3000.
+
+
+Sysfs attributes
+----------------
+
+The following attributes are supported:
+
+- Intel MAX 10 BMC for Intel PAC N3000:
+
+======================= =======================================================
+tempX_input Temperature of the component (specified by tempX_label)
+tempX_max Temperature maximum setpoint of the component
+tempX_crit Temperature critical setpoint of the component
+tempX_max_hyst Hysteresis for temperature maximum of the component
+tempX_crit_hyst Hysteresis for temperature critical of the component
+temp1_label "Board Temperature"
+temp2_label "FPGA Die Temperature"
+temp3_label "QSFP0 Temperature"
+temp4_label "QSFP1 Temperature"
+temp5_label "Retimer A Temperature"
+temp6_label "Retimer A SerDes Temperature"
+temp7_label "Retimer B Temperature"
+temp8_label "Retimer B SerDes Temperature"
+
+inX_input Measured voltage of the component (specified by
+ inX_label)
+in0_label "QSFP0 Supply Voltage"
+in1_label "QSFP1 Supply Voltage"
+in2_label "FPGA Core Voltage"
+in3_label "12V Backplane Voltage"
+in4_label "1.2V Voltage"
+in5_label "12V AUX Voltage"
+in6_label "1.8V Voltage"
+in7_label "3.3V Voltage"
+
+currX_input Measured current of the component (specified by
+ currX_label)
+curr1_label "FPGA Core Current"
+curr2_label "12V Backplane Current"
+curr3_label "12V AUX Current"
+
+powerX_input Measured power of the component (specified by
+ powerX_label)
+power1_label "Board Power"
+
+======================= =======================================================
+
+All the attributes are read-only.
diff --git a/Documentation/hwmon/ir35221.rst b/Documentation/hwmon/ir35221.rst
new file mode 100644
index 000000000..a83922e5c
--- /dev/null
+++ b/Documentation/hwmon/ir35221.rst
@@ -0,0 +1,92 @@
+Kernel driver ir35221
+=====================
+
+Supported chips:
+ * Infineon IR35221
+
+ Prefix: 'ir35221'
+
+ Addresses scanned: -
+
+ Datasheet: Datasheet is not publicly available.
+
+Author: Samuel Mendoza-Jonas <sam@mendozajonas.com>
+
+
+Description
+-----------
+
+IR35221 is a Digital DC-DC Multiphase Converter
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for an IR35221
+at address 0x70 on I2C bus #4::
+
+ # modprobe ir35221
+ # echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
+
+
+Sysfs attributes
+----------------
+
+======================= =======================================================
+curr1_label "iin"
+curr1_input Measured input current
+curr1_max Maximum current
+curr1_max_alarm Current high alarm
+
+curr[2-3]_label "iout[1-2]"
+curr[2-3]_input Measured output current
+curr[2-3]_crit Critical maximum current
+curr[2-3]_crit_alarm Current critical high alarm
+curr[2-3]_highest Highest output current
+curr[2-3]_lowest Lowest output current
+curr[2-3]_max Maximum current
+curr[2-3]_max_alarm Current high alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage critical high alarm
+in1_highest Highest input voltage
+in1_lowest Lowest input voltage
+in1_min Minimum input voltage
+in1_min_alarm Input voltage low alarm
+
+in[2-3]_label "vout[1-2]"
+in[2-3]_input Measured output voltage
+in[2-3]_lcrit Critical minimum output voltage
+in[2-3]_lcrit_alarm Output voltage critical low alarm
+in[2-3]_crit Critical maximum output voltage
+in[2-3]_crit_alarm Output voltage critical high alarm
+in[2-3]_highest Highest output voltage
+in[2-3]_lowest Lowest output voltage
+in[2-3]_max Maximum output voltage
+in[2-3]_max_alarm Output voltage high alarm
+in[2-3]_min Minimum output voltage
+in[2-3]_min_alarm Output voltage low alarm
+
+power1_label "pin"
+power1_input Measured input power
+power1_alarm Input power high alarm
+power1_max Input power limit
+
+power[2-3]_label "pout[1-2]"
+power[2-3]_input Measured output power
+power[2-3]_max Output power limit
+power[2-3]_max_alarm Output power high alarm
+
+temp[1-2]_input Measured temperature
+temp[1-2]_crit Critical high temperature
+temp[1-2]_crit_alarm Chip temperature critical high alarm
+temp[1-2]_highest Highest temperature
+temp[1-2]_lowest Lowest temperature
+temp[1-2]_max Maximum temperature
+temp[1-2]_max_alarm Chip temperature high alarm
+======================= =======================================================
diff --git a/Documentation/hwmon/ir36021.rst b/Documentation/hwmon/ir36021.rst
new file mode 100644
index 000000000..1faa85c39
--- /dev/null
+++ b/Documentation/hwmon/ir36021.rst
@@ -0,0 +1,63 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver ir36021
+=====================
+
+Supported chips:
+
+ * Infineon IR36021
+
+ Prefix: ir36021
+ Addresses scanned: -
+
+ Datasheet: Publicly available at the Infineon website
+ https://www.infineon.com/dgdl/ir36021.pdf?fileId=5546d462533600a4015355d0aa2d1775
+
+Authors:
+ - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+Description
+-----------
+
+The IR36021 is a dual-loop digital multi-phase buck controller designed for
+point of load applications.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Sysfs attributes
+----------------
+
+======================= ===========================
+curr1_label "iin"
+curr1_input Measured input current
+curr1_alarm Input fault alarm
+
+curr2_label "iout1"
+curr2_input Measured output current
+curr2_alarm Output over-current alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_alarm Input under-voltage alarm
+
+in2_label "vout1"
+in2_input Measured output voltage
+in2_alarm Output over-voltage alarm
+
+power1_label "pin"
+power1_input Measured input power
+power1_alarm Input under-voltage alarm
+
+power2_label "pout1"
+power2_input Measured output power
+
+temp1_input Measured temperature
+temp1_alarm Temperature alarm
+
+temp2_input Measured other loop temperature
+temp2_alarm Temperature alarm
+======================= ===========================
diff --git a/Documentation/hwmon/ir38064.rst b/Documentation/hwmon/ir38064.rst
new file mode 100644
index 000000000..e1148f21e
--- /dev/null
+++ b/Documentation/hwmon/ir38064.rst
@@ -0,0 +1,90 @@
+Kernel driver ir38064
+=====================
+
+Supported chips:
+
+ * Infineon IR38060
+
+ Prefix: 'IR38060'
+ Addresses scanned: -
+
+ Datasheet: Publicly available at the Infineon website
+ https://www.infineon.com/dgdl/Infineon-IR38060M-DS-v03_16-EN.pdf?fileId=5546d4625c167129015c3291ea9a4cee
+
+ * Infineon IR38064
+
+ Prefix: 'ir38064'
+ Addresses scanned: -
+
+ Datasheet: Publicly available at the Infineon website
+ https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca
+
+ * Infineon IR38164
+
+ Prefix: 'ir38164'
+ Addresses scanned: -
+
+ Datasheet: Publicly available at the Infineon website
+ https://www.infineon.com/dgdl/Infineon-IR38164M-DS-v02_02-EN.pdf?fileId=5546d462636cc8fb01640046efea1248
+
+ * Infineon ir38263
+
+ Prefix: 'ir38263'
+ Addresses scanned: -
+
+ Datasheet: Publicly available at the Infineon website
+ https://www.infineon.com/dgdl/Infineon-IR38263M-DataSheet-v03_05-EN.pdf?fileId=5546d4625b62cd8a015bcf81f90a6e52
+
+Authors:
+ - Maxim Sloyko <maxims@google.com>
+ - Patrick Venture <venture@google.com>
+
+Description
+-----------
+
+IR38x6x are a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Sysfs attributes
+----------------
+
+======================= ===========================
+curr1_label "iout1"
+curr1_input Measured output current
+curr1_crit Critical maximum current
+curr1_crit_alarm Current critical high alarm
+curr1_max Maximum current
+curr1_max_alarm Current high alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage critical high alarm
+in1_min Minimum input voltage
+in1_min_alarm Input voltage low alarm
+
+in2_label "vout1"
+in2_input Measured output voltage
+in2_lcrit Critical minimum output voltage
+in2_lcrit_alarm Output voltage critical low alarm
+in2_crit Critical maximum output voltage
+in2_crit_alarm Output voltage critical high alarm
+in2_max Maximum output voltage
+in2_max_alarm Output voltage high alarm
+in2_min Minimum output voltage
+in2_min_alarm Output voltage low alarm
+
+power1_label "pout1"
+power1_input Measured output power
+
+temp1_input Measured temperature
+temp1_crit Critical high temperature
+temp1_crit_alarm Chip temperature critical high alarm
+temp1_max Maximum temperature
+temp1_max_alarm Chip temperature high alarm
+======================= ===========================
diff --git a/Documentation/hwmon/isl68137.rst b/Documentation/hwmon/isl68137.rst
new file mode 100644
index 000000000..0e71b2204
--- /dev/null
+++ b/Documentation/hwmon/isl68137.rst
@@ -0,0 +1,605 @@
+Kernel driver isl68137
+======================
+
+Supported chips:
+
+ * Renesas ISL68137
+
+ Prefix: 'isl68137'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available at the Renesas website
+ https://www.renesas.com/us/en/www/doc/datasheet/isl68137.pdf
+
+ * Renesas ISL68220
+
+ Prefix: 'isl68220'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68221
+
+ Prefix: 'isl68221'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68222
+
+ Prefix: 'isl68222'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68223
+
+ Prefix: 'isl68223'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68224
+
+ Prefix: 'isl68224'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68225
+
+ Prefix: 'isl68225'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68226
+
+ Prefix: 'isl68226'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68227
+
+ Prefix: 'isl68227'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68229
+
+ Prefix: 'isl68229'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68233
+
+ Prefix: 'isl68233'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL68239
+
+ Prefix: 'isl68239'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69222
+
+ Prefix: 'isl69222'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69223
+
+ Prefix: 'isl69223'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69224
+
+ Prefix: 'isl69224'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69225
+
+ Prefix: 'isl69225'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69227
+
+ Prefix: 'isl69227'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69228
+
+ Prefix: 'isl69228'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69234
+
+ Prefix: 'isl69234'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69236
+
+ Prefix: 'isl69236'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69239
+
+ Prefix: 'isl69239'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69242
+
+ Prefix: 'isl69242'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69243
+
+ Prefix: 'isl69243'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69247
+
+ Prefix: 'isl69247'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69248
+
+ Prefix: 'isl69248'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69254
+
+ Prefix: 'isl69254'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69255
+
+ Prefix: 'isl69255'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69256
+
+ Prefix: 'isl69256'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69259
+
+ Prefix: 'isl69259'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69260
+
+ Prefix: 'isl69260'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69268
+
+ Prefix: 'isl69268'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69269
+
+ Prefix: 'isl69269'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas ISL69298
+
+ Prefix: 'isl69298'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas RAA228000
+
+ Prefix: 'raa228000'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas RAA228004
+
+ Prefix: 'raa228004'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas RAA228006
+
+ Prefix: 'raa228006'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas RAA228228
+
+ Prefix: 'raa228228'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas RAA229001
+
+ Prefix: 'raa229001'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+ * Renesas RAA229004
+
+ Prefix: 'raa229004'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Publicly available (after August 2020 launch) at the Renesas website
+
+Authors:
+ - Maxim Sloyko <maxims@google.com>
+ - Robert Lippert <rlippert@google.com>
+ - Patrick Venture <venture@google.com>
+ - Grant Peltier <grant.peltier.jg@renesas.com>
+
+Description
+-----------
+
+This driver supports the Renesas ISL68137 and all 2nd generation Renesas
+digital multiphase voltage regulators (raa_dmpvr2). The ISL68137 is a digital
+output 7-phase configurable PWM controller with an AVSBus interface. 2nd
+generation devices are grouped into 4 distinct configurations: '1rail' for
+single-rail devices, '2rail' for dual-rail devices, '3rail' for 3-rail devices,
+and 'hv' for high voltage single-rail devices. Consult the individual datasheets
+for more information.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+The ISL68137 AVS operation mode must be enabled/disabled at runtime.
+
+Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute
+for the ISL68137.
+
+For 2nd generation Renesas digital multiphase voltage regulators, only the
+normal sysfs pmbus attributes are supported.
+
+ISL68137 sysfs attributes
+-------------------------
+
+======================= ====================================
+avs(0|1)_enable Controls the AVS state of each rail.
+
+curr1_label "iin"
+curr1_input Measured input current
+curr1_crit Critical maximum current
+curr1_crit_alarm Current critical high alarm
+
+curr[2-3]_label "iout[1-2]"
+curr[2-3]_input Measured output current
+curr[2-3]_crit Critical maximum current
+curr[2-3]_crit_alarm Current critical high alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_lcrit Critical minimum input voltage
+in1_lcrit_alarm Input voltage critical low alarm
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage critical high alarm
+
+in[2-3]_label "vout[1-2]"
+in[2-3]_input Measured output voltage
+in[2-3]_lcrit Critical minimum output voltage
+in[2-3]_lcrit_alarm Output voltage critical low alarm
+in[2-3]_crit Critical maximum output voltage
+in[2-3]_crit_alarm Output voltage critical high alarm
+
+power1_label "pin"
+power1_input Measured input power
+power1_alarm Input power high alarm
+
+power[2-3]_label "pout[1-2]"
+power[2-3]_input Measured output power
+
+temp[1-3]_input Measured temperature
+temp[1-3]_crit Critical high temperature
+temp[1-3]_crit_alarm Chip temperature critical high alarm
+temp[1-3]_max Maximum temperature
+temp[1-3]_max_alarm Chip temperature high alarm
+======================= ====================================
+
+raa_dmpvr2_1rail/hv sysfs attributes
+------------------------------------
+
+======================= ==========================================
+curr1_label "iin"
+curr1_input Measured input current
+curr1_crit Critical maximum current
+curr1_crit_alarm Current critical high alarm
+
+curr2_label "iout"
+curr2_input Measured output current
+curr2_crit Critical maximum current
+curr2_crit_alarm Current critical high alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_lcrit Critical minimum input voltage
+in1_lcrit_alarm Input voltage critical low alarm
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage critical high alarm
+
+in2_label "vmon"
+in2_input Scaled VMON voltage read from the VMON pin
+
+in3_label "vout"
+in3_input Measured output voltage
+in3_lcrit Critical minimum output voltage
+in3_lcrit_alarm Output voltage critical low alarm
+in3_crit Critical maximum output voltage
+in3_crit_alarm Output voltage critical high alarm
+
+power1_label "pin"
+power1_input Measured input power
+power1_alarm Input power high alarm
+
+power2_label "pout"
+power2_input Measured output power
+
+temp[1-3]_input Measured temperature
+temp[1-3]_crit Critical high temperature
+temp[1-3]_crit_alarm Chip temperature critical high alarm
+temp[1-3]_max Maximum temperature
+temp[1-3]_max_alarm Chip temperature high alarm
+======================= ==========================================
+
+raa_dmpvr2_2rail sysfs attributes
+---------------------------------
+
+======================= ==========================================
+curr[1-2]_label "iin[1-2]"
+curr[1-2]_input Measured input current
+curr[1-2]_crit Critical maximum current
+curr[1-2]_crit_alarm Current critical high alarm
+
+curr[3-4]_label "iout[1-2]"
+curr[3-4]_input Measured output current
+curr[3-4]_crit Critical maximum current
+curr[3-4]_crit_alarm Current critical high alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_lcrit Critical minimum input voltage
+in1_lcrit_alarm Input voltage critical low alarm
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage critical high alarm
+
+in2_label "vmon"
+in2_input Scaled VMON voltage read from the VMON pin
+
+in[3-4]_label "vout[1-2]"
+in[3-4]_input Measured output voltage
+in[3-4]_lcrit Critical minimum output voltage
+in[3-4]_lcrit_alarm Output voltage critical low alarm
+in[3-4]_crit Critical maximum output voltage
+in[3-4]_crit_alarm Output voltage critical high alarm
+
+power[1-2]_label "pin[1-2]"
+power[1-2]_input Measured input power
+power[1-2]_alarm Input power high alarm
+
+power[3-4]_label "pout[1-2]"
+power[3-4]_input Measured output power
+
+temp[1-5]_input Measured temperature
+temp[1-5]_crit Critical high temperature
+temp[1-5]_crit_alarm Chip temperature critical high alarm
+temp[1-5]_max Maximum temperature
+temp[1-5]_max_alarm Chip temperature high alarm
+======================= ==========================================
+
+raa_dmpvr2_3rail sysfs attributes
+---------------------------------
+
+======================= ==========================================
+curr[1-3]_label "iin[1-3]"
+curr[1-3]_input Measured input current
+curr[1-3]_crit Critical maximum current
+curr[1-3]_crit_alarm Current critical high alarm
+
+curr[4-6]_label "iout[1-3]"
+curr[4-6]_input Measured output current
+curr[4-6]_crit Critical maximum current
+curr[4-6]_crit_alarm Current critical high alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_lcrit Critical minimum input voltage
+in1_lcrit_alarm Input voltage critical low alarm
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage critical high alarm
+
+in2_label "vmon"
+in2_input Scaled VMON voltage read from the VMON pin
+
+in[3-5]_label "vout[1-3]"
+in[3-5]_input Measured output voltage
+in[3-5]_lcrit Critical minimum output voltage
+in[3-5]_lcrit_alarm Output voltage critical low alarm
+in[3-5]_crit Critical maximum output voltage
+in[3-5]_crit_alarm Output voltage critical high alarm
+
+power[1-3]_label "pin[1-3]"
+power[1-3]_input Measured input power
+power[1-3]_alarm Input power high alarm
+
+power[4-6]_label "pout[1-3]"
+power[4-6]_input Measured output power
+
+temp[1-7]_input Measured temperature
+temp[1-7]_crit Critical high temperature
+temp[1-7]_crit_alarm Chip temperature critical high alarm
+temp[1-7]_max Maximum temperature
+temp[1-7]_max_alarm Chip temperature high alarm
+======================= ==========================================
diff --git a/Documentation/hwmon/it87.rst b/Documentation/hwmon/it87.rst
new file mode 100644
index 000000000..2d83f23be
--- /dev/null
+++ b/Documentation/hwmon/it87.rst
@@ -0,0 +1,348 @@
+Kernel driver it87
+==================
+
+Supported chips:
+
+ * IT8603E/IT8623E
+
+ Prefix: 'it8603'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8620E
+
+ Prefix: 'it8620'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ * IT8628E
+
+ Prefix: 'it8628'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8705F
+
+ Prefix: 'it87'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Once publicly available at the ITE website, but no longer
+
+ * IT8712F
+
+ Prefix: 'it8712'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Once publicly available at the ITE website, but no longer
+
+ * IT8716F/IT8726F
+
+ Prefix: 'it8716'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Once publicly available at the ITE website, but no longer
+
+ * IT8718F
+
+ Prefix: 'it8718'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Once publicly available at the ITE website, but no longer
+
+ * IT8720F
+
+ Prefix: 'it8720'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8721F/IT8758E
+
+ Prefix: 'it8721'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8728F
+
+ Prefix: 'it8728'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8732F
+
+ Prefix: 'it8732'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8771E
+
+ Prefix: 'it8771'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8772E
+
+ Prefix: 'it8772'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8781F
+
+ Prefix: 'it8781'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8782F
+
+ Prefix: 'it8782'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8783E/F
+
+ Prefix: 'it8783'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8786E
+
+ Prefix: 'it8786'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * IT8790E
+
+ Prefix: 'it8790'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: Not publicly available
+
+ * SiS950 [clone of IT8705F]
+
+ Prefix: 'it87'
+
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+
+ Datasheet: No longer be available
+
+
+Authors:
+ - Christophe Gauthron
+ - Jean Delvare <jdelvare@suse.de>
+
+
+Module Parameters
+-----------------
+
+* update_vbat: int
+ 0 if vbat should report power on value, 1 if vbat should be updated after
+ each read. Default is 0. On some boards the battery voltage is provided
+ by either the battery or the onboard power supply. Only the first reading
+ at power on will be the actual battery voltage (which the chip does
+ automatically). On other boards the battery voltage is always fed to
+ the chip so can be read at any time. Excessive reading may decrease
+ battery life but no information is given in the datasheet.
+
+* fix_pwm_polarity int
+ Force PWM polarity to active high (DANGEROUS). Some chips are
+ misconfigured by BIOS - PWM values would be inverted. This option tries
+ to fix this. Please contact your BIOS manufacturer and ask him for fix.
+
+
+Hardware Interfaces
+-------------------
+
+All the chips supported by this driver are LPC Super-I/O chips, accessed
+through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
+SMBus interface to the hardware monitoring functions. This driver no
+longer supports this interface though, as it is slower and less reliable
+than the ISA access, and was only available on a small number of
+motherboard models.
+
+
+Description
+-----------
+
+This driver implements support for the IT8603E, IT8620E, IT8623E, IT8628E,
+IT8705F, IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F,
+IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and
+SiS950 chips.
+
+These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
+joysticks and other miscellaneous stuff. For hardware monitoring, they
+include an 'environment controller' with 3 temperature sensors, 3 fan
+rotation speed sensors, 8 voltage sensors, associated alarms, and chassis
+intrusion detection.
+
+The IT8712F and IT8716F additionally feature VID inputs, used to report
+the Vcore voltage of the processor. The early IT8712F have 5 VID pins,
+the IT8716F and late IT8712F have 6. They are shared with other functions
+though, so the functionality may not be available on a given system.
+
+The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value
+is stored in the Super-I/O configuration space. Due to technical limitations,
+this value can currently only be read once at initialization time, so
+the driver won't notice and report changes in the VID value. The two
+upper VID bits share their pins with voltage inputs (in5 and in6) so you
+can't have both on a given board.
+
+The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
+have support for 2 additional fans. The additional fans are supported by the
+driver.
+
+The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F,
+IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
+counters for fans 1 to 3. This is better (no more fan clock divider mess) but
+not compatible with the older chips and revisions. The 16-bit tachometer mode
+is enabled by the driver when one of the above chips is detected.
+
+The IT8726F is just bit enhanced IT8716F with additional hardware
+for AMD power sequencing. Therefore the chip will appear as IT8716F
+to userspace applications.
+
+The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F,
+until a datasheet becomes available (hopefully.)
+
+The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to
+IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
+of the fan is not supported (value 0 of pwmX_enable).
+
+The IT8620E and IT8628E are custom designs, hardware monitoring part is similar
+to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
+
+The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
+
+The IT8732F supports a closed-loop mode for fan control, but this is not
+currently implemented by the driver.
+
+Temperatures are measured in degrees Celsius. An alarm is triggered once
+when the Overtemperature Shutdown limit is crossed.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. When
+16-bit tachometer counters aren't used, fan readings can be divided by
+a programmable divider (1, 2, 4 or 8) to give the readings more range or
+accuracy. With a divider of 2, the lowest representable value is around
+2600 RPM. Not all RPM values can accurately be represented, so some rounding
+is done.
+
+Voltage sensors (also known as IN sensors) report their values in volts. An
+alarm is triggered if the voltage has crossed a programmable minimum or
+maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. On most chips, all
+voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution
+of 0.016 volt. IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and
+3.06 volts, with a resolution of 0.012 volt. IT8732F can measure between 0 and
+2.8 volts with a resolution of 0.0109 volt. The battery voltage in8 does not
+have limit registers.
+
+On the IT8603E, IT8620E, IT8628E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F,
+and IT8783E/F, some voltage inputs are internal and scaled inside the chip:
+* in3 (optional)
+* in7 (optional for IT8781F, IT8782F, and IT8783E/F)
+* in8 (always)
+* in9 (relevant for IT8603E only)
+The driver handles this transparently so user-space doesn't have to care.
+
+The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value:
+the voltage level your processor should work with. This is hardcoded by
+the mainboard and/or processor itself. It is a value in volts.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared! Note that in the current implementation, all hardware
+registers are read whenever any data is read (unless it is less than 1.5
+seconds since the last update). This means that you can easily miss
+once-only alarms.
+
+Out-of-limit readings can also result in beeping, if the chip is properly
+wired and configured. Beeping can be enabled or disabled per sensor type
+(temperatures, voltages and fans.)
+
+The IT87xx only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
+
+To change sensor N to a thermistor, 'echo 4 > tempN_type' where N is 1, 2,
+or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'.
+Give 0 for unused sensor. Any other value is invalid. To configure this at
+startup, consult lm_sensors's /etc/sensors.conf. (4 = thermistor;
+3 = thermal diode)
+
+
+Fan speed control
+-----------------
+
+The fan speed control features are limited to manual PWM mode. Automatic
+"Smart Guardian" mode control handling is only implemented for older chips
+(see below.) However if you want to go for "manual mode" just write 1 to
+pwmN_enable.
+
+If you are only able to control the fan speed with very small PWM values,
+try lowering the PWM base frequency (pwm1_freq). Depending on the fan,
+it may give you a somewhat greater control range. The same frequency is
+used to drive all fan outputs, which is why pwm2_freq and pwm3_freq are
+read-only.
+
+
+Automatic fan speed control (old interface)
+-------------------------------------------
+
+The driver supports the old interface to automatic fan speed control
+which is implemented by IT8705F chips up to revision F and IT8712F
+chips up to revision G.
+
+This interface implements 4 temperature vs. PWM output trip points.
+The PWM output of trip point 4 is always the maximum value (fan running
+at full speed) while the PWM output of the other 3 trip points can be
+freely chosen. The temperature of all 4 trip points can be freely chosen.
+Additionally, trip point 1 has an hysteresis temperature attached, to
+prevent fast switching between fan on and off.
+
+The chip automatically computes the PWM output value based on the input
+temperature, based on this simple rule: if the temperature value is
+between trip point N and trip point N+1 then the PWM output value is
+the one of trip point N. The automatic control mode is less flexible
+than the manual control mode, but it reacts faster, is more robust and
+doesn't use CPU cycles.
+
+Trip points must be set properly before switching to automatic fan speed
+control mode. The driver will perform basic integrity checks before
+actually switching to automatic control mode.
+
+
+Temperature offset attributes
+-----------------------------
+
+The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
+temperature for thermal diodes or diode-connected thermal transistors.
+If a temperature sensor is configured for thermistors, the attribute values
+are ignored. If the thermal sensor type is Intel PECI, the temperature offset
+must be programmed to the critical CPU temperature.
diff --git a/Documentation/hwmon/jc42.rst b/Documentation/hwmon/jc42.rst
new file mode 100644
index 000000000..19d10512f
--- /dev/null
+++ b/Documentation/hwmon/jc42.rst
@@ -0,0 +1,152 @@
+Kernel driver jc42
+==================
+
+Supported chips:
+
+ * Analog Devices ADT7408
+
+ Datasheets:
+
+ https://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
+
+ * Atmel AT30TS00, AT30TS002A/B, AT30TSE004A
+
+ Datasheets:
+
+ http://www.atmel.com/Images/doc8585.pdf
+
+ http://www.atmel.com/Images/doc8711.pdf
+
+ http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf
+
+ http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf
+
+ * IDT TSE2002B3, TSE2002GB2, TSE2004GB2, TS3000B3, TS3000GB0, TS3000GB2,
+
+ TS3001GB2
+
+ Datasheets:
+
+ Available from IDT web site
+
+ * Maxim MAX6604
+
+ Datasheets:
+
+ http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
+
+ * Microchip MCP9804, MCP9805, MCP9808, MCP98242, MCP98243, MCP98244, MCP9843
+
+ Datasheets:
+
+ https://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
+
+ https://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
+
+ https://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf
+
+ https://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
+
+ https://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
+
+ https://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf
+
+ * NXP Semiconductors SE97, SE97B, SE98, SE98A
+
+ Datasheets:
+
+ https://www.nxp.com/documents/data_sheet/SE97.pdf
+
+ https://www.nxp.com/documents/data_sheet/SE97B.pdf
+
+ https://www.nxp.com/documents/data_sheet/SE98.pdf
+
+ https://www.nxp.com/documents/data_sheet/SE98A.pdf
+
+ * ON Semiconductor CAT34TS02, CAT6095
+
+ Datasheet:
+
+ https://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
+
+ https://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
+
+ * ST Microelectronics STTS424, STTS424E02, STTS2002, STTS2004, STTS3000
+
+ Datasheets:
+
+ http://www.st.com/web/en/resource/technical/document/datasheet/CD00157556.pdf
+
+ http://www.st.com/web/en/resource/technical/document/datasheet/CD00157558.pdf
+
+ http://www.st.com/web/en/resource/technical/document/datasheet/CD00266638.pdf
+
+ http://www.st.com/web/en/resource/technical/document/datasheet/CD00225278.pdf
+
+ http://www.st.com/web/en/resource/technical/document/datasheet/DM00076709.pdf
+
+ * JEDEC JC 42.4 compliant temperature sensor chips
+
+ Datasheet:
+
+ http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
+
+
+ Common for all chips:
+
+ Prefix: 'jc42'
+
+ Addresses scanned: I2C 0x18 - 0x1f
+
+Author:
+ Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
+The driver auto-detects the chips listed above, but can be manually instantiated
+to support other JC 42.4 compliant chips.
+
+Example: the following will load the driver for a generic JC 42.4 compliant
+temperature sensor at address 0x18 on I2C bus #1::
+
+ # modprobe jc42
+ # echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
+
+A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum,
+and critical temperature can be configured. There are alarms for high, low,
+and critical thresholds.
+
+There is also an hysteresis to control the thresholds for resetting alarms.
+Per JC 42.4 specification, the hysteresis threshold can be configured to 0, 1.5,
+3.0, and 6.0 degrees C. Configured hysteresis values will be rounded to those
+limits. The chip supports only a single register to configure the hysteresis,
+which applies to all limits. This register can be written by writing into
+temp1_crit_hyst. Other hysteresis attributes are read-only.
+
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
+Sysfs entries
+-------------
+
+======================= ===========================================
+temp1_input Temperature (RO)
+temp1_min Minimum temperature (RO or RW)
+temp1_max Maximum temperature (RO or RW)
+temp1_crit Critical high temperature (RO or RW)
+
+temp1_crit_hyst Critical hysteresis temperature (RO or RW)
+temp1_max_hyst Maximum hysteresis temperature (RO)
+
+temp1_min_alarm Temperature low alarm
+temp1_max_alarm Temperature high alarm
+temp1_crit_alarm Temperature critical alarm
+======================= ===========================================
diff --git a/Documentation/hwmon/k10temp.rst b/Documentation/hwmon/k10temp.rst
new file mode 100644
index 000000000..91b99adc6
--- /dev/null
+++ b/Documentation/hwmon/k10temp.rst
@@ -0,0 +1,134 @@
+Kernel driver k10temp
+=====================
+
+Supported chips:
+
+* AMD Family 10h processors:
+
+ Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below)
+
+ Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below)
+
+ Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
+
+ Socket S1G3: Athlon II, Sempron, Turion II
+
+* AMD Family 11h processors:
+
+ Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+
+* AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
+
+* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
+
+* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri",
+ "Carrizo", "Stoney Ridge", "Bristol Ridge"
+
+* AMD Family 16h processors: "Kabini", "Mullins"
+
+* AMD Family 17h processors: "Zen", "Zen 2"
+
+* AMD Family 18h processors: "Hygon Dhyana"
+
+* AMD Family 19h processors: "Zen 3"
+
+ Prefix: 'k10temp'
+
+ Addresses scanned: PCI space
+
+ Datasheets:
+
+ BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors:
+
+ http://support.amd.com/us/Processor_TechDocs/31116.pdf
+
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
+
+ http://support.amd.com/us/Processor_TechDocs/41256.pdf
+
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors:
+
+ http://support.amd.com/us/Processor_TechDocs/41131.pdf
+
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+
+ http://support.amd.com/us/Processor_TechDocs/43170.pdf
+
+ Revision Guide for AMD Family 10h Processors:
+
+ http://support.amd.com/us/Processor_TechDocs/41322.pdf
+
+ Revision Guide for AMD Family 11h Processors:
+
+ http://support.amd.com/us/Processor_TechDocs/41788.pdf
+
+ Revision Guide for AMD Family 12h Processors:
+
+ http://support.amd.com/us/Processor_TechDocs/44739.pdf
+
+ Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+
+ http://support.amd.com/us/Processor_TechDocs/47534.pdf
+
+ AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
+
+ http://support.amd.com/us/Processor_TechDocs/43373.pdf
+
+ AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
+
+ http://support.amd.com/us/Processor_TechDocs/43374.pdf
+
+ AMD Family 10h Desktop Processor Power and Thermal Data Sheet:
+
+ http://support.amd.com/us/Processor_TechDocs/43375.pdf
+
+Author: Clemens Ladisch <clemens@ladisch.de>
+
+Description
+-----------
+
+This driver permits reading of the internal temperature sensor of AMD
+Family 10h/11h/12h/14h/15h/16h processors.
+
+All these processors have a sensor, but on those for Socket F or AM2+,
+the sensor may return inconsistent values (erratum 319). The driver
+will refuse to load on these revisions unless you specify the "force=1"
+module parameter.
+
+Due to technical reasons, the driver can detect only the mainboard's
+socket type, not the processor's actual capabilities. Therefore, if you
+are using an AM3 processor on an AM2+ mainboard, you can safely use the
+"force=1" parameter.
+
+For CPUs older than Family 17h, there is one temperature measurement value,
+available as temp1_input in sysfs. It is measured in degrees Celsius with a
+resolution of 1/8th degree. Please note that it is defined as a relative
+value; to quote the AMD manual::
+
+ Tctl is the processor temperature control value, used by the platform to
+ control cooling systems. Tctl is a non-physical temperature on an
+ arbitrary scale measured in degrees. It does _not_ represent an actual
+ physical temperature like die or case temperature. Instead, it specifies
+ the processor temperature relative to the point at which the system must
+ supply the maximum cooling for the processor's specified maximum case
+ temperature and maximum thermal power dissipation.
+
+The maximum value for Tctl is available in the file temp1_max.
+
+If the BIOS has enabled hardware temperature control, the threshold at
+which the processor will throttle itself to avoid damage is available in
+temp1_crit and temp1_crit_hyst.
+
+On some AMD CPUs, there is a difference between the die temperature (Tdie) and
+the reported temperature (Tctl). Tdie is the real measured temperature, and
+Tctl is used for fan control. While Tctl is always available as temp1_input,
+the driver exports Tdie temperature as temp2_input for those CPUs which support
+it.
+
+Models from 17h family report relative temperature, the driver aims to
+compensate and report the real temperature.
+
+On Family 17h and Family 18h CPUs, additional temperature sensors may report
+Core Complex Die (CCD) temperatures. Up to 8 such temperatures are reported
+as temp{3..10}_input, labeled Tccd{1..8}. Actual support depends on the CPU
+variant.
diff --git a/Documentation/hwmon/k8temp.rst b/Documentation/hwmon/k8temp.rst
new file mode 100644
index 000000000..ab25a73e7
--- /dev/null
+++ b/Documentation/hwmon/k8temp.rst
@@ -0,0 +1,62 @@
+Kernel driver k8temp
+====================
+
+Supported chips:
+
+ * AMD Athlon64/FX or Opteron CPUs
+
+ Prefix: 'k8temp'
+
+ Addresses scanned: PCI space
+
+ Datasheet: https://www.amd.com/system/files/TechDocs/32559.pdf
+
+Author: Rudolf Marek
+
+Contact: Rudolf Marek <r.marek@assembler.cz>
+
+Description
+-----------
+
+This driver permits reading temperature sensor(s) embedded inside AMD K8
+family CPUs (Athlon64/FX, Opteron). Official documentation says that it works
+from revision F of K8 core, but in fact it seems to be implemented for all
+revisions of K8 except the first two revisions (SH-B0 and SH-B3).
+
+Please note that you will need at least lm-sensors 2.10.1 for proper userspace
+support.
+
+There can be up to four temperature sensors inside single CPU. The driver
+will auto-detect the sensors and will display only temperatures from
+implemented sensors.
+
+Mapping of /sys files is as follows:
+
+============= ===================================
+temp1_input temperature of Core 0 and "place" 0
+temp2_input temperature of Core 0 and "place" 1
+temp3_input temperature of Core 1 and "place" 0
+temp4_input temperature of Core 1 and "place" 1
+============= ===================================
+
+Temperatures are measured in degrees Celsius and measurement resolution is
+1 degree C. It is expected that future CPU will have better resolution. The
+temperature is updated once a second. Valid temperatures are from -49 to
+206 degrees C.
+
+Temperature known as TCaseMax was specified for processors up to revision E.
+This temperature is defined as temperature between heat-spreader and CPU
+case, so the internal CPU temperature supplied by this driver can be higher.
+There is no easy way how to measure the temperature which will correlate
+with TCaseMax temperature.
+
+For newer revisions of CPU (rev F, socket AM2) there is a mathematically
+computed temperature called TControl, which must be lower than TControlMax.
+
+The relationship is following:
+
+ temp1_input - TjOffset*2 < TControlMax,
+
+TjOffset is not yet exported by the driver, TControlMax is usually
+70 degrees C. The rule of the thumb -> CPU temperature should not cross
+60 degrees C too much.
diff --git a/Documentation/hwmon/lan966x.rst b/Documentation/hwmon/lan966x.rst
new file mode 100644
index 000000000..1d1724afa
--- /dev/null
+++ b/Documentation/hwmon/lan966x.rst
@@ -0,0 +1,40 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver lan966x-hwmon
+===========================
+
+Supported chips:
+
+ * Microchip LAN9668 (sensor in SoC)
+
+ Prefix: 'lan9668-hwmon'
+
+ Datasheet: https://microchip-ung.github.io/lan9668_reginfo
+
+Authors:
+
+ Michael Walle <michael@walle.cc>
+
+Description
+-----------
+
+This driver implements support for the Microchip LAN9668 on-chip
+temperature sensor as well as its fan controller. It provides one
+temperature sensor and one fan controller. The temperature range
+of the sensor is specified from -40 to +125 degrees Celsius and
+its accuracy is +/- 5 degrees Celsius. The fan controller has a
+tacho input and a PWM output with a customizable PWM output
+frequency ranging from ~20Hz to ~650kHz.
+
+No alarms are supported by the SoC.
+
+The driver exports temperature values, fan tacho input and PWM
+settings via the following sysfs files:
+
+**temp1_input**
+
+**fan1_input**
+
+**pwm1**
+
+**pwm1_freq**
diff --git a/Documentation/hwmon/lineage-pem.rst b/Documentation/hwmon/lineage-pem.rst
new file mode 100644
index 000000000..10c271dc2
--- /dev/null
+++ b/Documentation/hwmon/lineage-pem.rst
@@ -0,0 +1,85 @@
+Kernel driver lineage-pem
+=========================
+
+Supported devices:
+
+ * Lineage Compact Power Line Power Entry Modules
+
+ Prefix: 'lineage-pem'
+
+ Addresses scanned: -
+
+ Documentation:
+
+ http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports various Lineage Compact Power Line DC/DC and AC/DC
+converters such as CP1800, CP2000AC, CP2000DC, CP2100DC, and others.
+
+Lineage CPL power entry modules are nominally PMBus compliant. However, most
+standard PMBus commands are not supported. Specifically, all hardware monitoring
+and status reporting commands are non-standard. For this reason, a standard
+PMBus driver can not be used.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for Lineage CPL devices, since there is no register
+which can be safely used to identify the chip. You will have to instantiate
+the devices explicitly.
+
+Example: the following will load the driver for a Lineage PEM at address 0x40
+on I2C bus #1::
+
+ $ modprobe lineage-pem
+ $ echo lineage-pem 0x40 > /sys/bus/i2c/devices/i2c-1/new_device
+
+All Lineage CPL power entry modules have a built-in I2C bus master selector
+(PCA9541). To ensure device access, this driver should only be used as client
+driver to the pca9541 I2C master selector driver.
+
+
+Sysfs entries
+-------------
+
+All Lineage CPL devices report output voltage and device temperature as well as
+alarms for output voltage, temperature, input voltage, input current, input power,
+and fan status.
+
+Input voltage, input current, input power, and fan speed measurement is only
+supported on newer devices. The driver detects if those attributes are supported,
+and only creates respective sysfs entries if they are.
+
+======================= ===============================
+in1_input Output voltage (mV)
+in1_min_alarm Output undervoltage alarm
+in1_max_alarm Output overvoltage alarm
+in1_crit Output voltage critical alarm
+
+in2_input Input voltage (mV, optional)
+in2_alarm Input voltage alarm
+
+curr1_input Input current (mA, optional)
+curr1_alarm Input overcurrent alarm
+
+power1_input Input power (uW, optional)
+power1_alarm Input power alarm
+
+fan1_input Fan 1 speed (rpm, optional)
+fan2_input Fan 2 speed (rpm, optional)
+fan3_input Fan 3 speed (rpm, optional)
+
+temp1_input
+temp1_max
+temp1_crit
+temp1_alarm
+temp1_crit_alarm
+temp1_fault
+======================= ===============================
diff --git a/Documentation/hwmon/lm25066.rst b/Documentation/hwmon/lm25066.rst
new file mode 100644
index 000000000..a2098eb24
--- /dev/null
+++ b/Documentation/hwmon/lm25066.rst
@@ -0,0 +1,139 @@
+Kernel driver lm25066
+=====================
+
+Supported chips:
+
+ * TI LM25056
+
+ Prefix: 'lm25056'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ https://www.ti.com/lit/gpn/lm25056
+
+ https://www.ti.com/lit/gpn/lm25056a
+
+ * National Semiconductor LM25066
+
+ Prefix: 'lm25066'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ http://www.national.com/pf/LM/LM25066.html
+
+ http://www.national.com/pf/LM/LM25066A.html
+
+ * National Semiconductor LM5064
+
+ Prefix: 'lm5064'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://www.national.com/pf/LM/LM5064.html
+
+ * National Semiconductor LM5066
+
+ Prefix: 'lm5066'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://www.national.com/pf/LM/LM5066.html
+
+ * Texas Instruments LM5066I
+
+ Prefix: 'lm5066i'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ https://www.ti.com/product/LM5066I
+
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for National Semiconductor / TI LM25056,
+LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
+Control, and Protection ICs.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+The shunt (sense) resistor value can be configured by a device tree property;
+see Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml for details.
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= =======================================================
+in1_label "vin"
+in1_input Measured input voltage.
+in1_average Average measured input voltage.
+in1_min Minimum input voltage.
+in1_max Maximum input voltage.
+in1_min_alarm Input voltage low alarm.
+in1_max_alarm Input voltage high alarm.
+
+in2_label "vmon"
+in2_input Measured voltage on VAUX pin
+in2_min Minimum VAUX voltage (LM25056 only).
+in2_max Maximum VAUX voltage (LM25056 only).
+in2_min_alarm VAUX voltage low alarm (LM25056 only).
+in2_max_alarm VAUX voltage high alarm (LM25056 only).
+
+in3_label "vout1"
+ Not supported on LM25056.
+in3_input Measured output voltage.
+in3_average Average measured output voltage.
+in3_min Minimum output voltage.
+in3_min_alarm Output voltage low alarm.
+
+curr1_label "iin"
+curr1_input Measured input current.
+curr1_average Average measured input current.
+curr1_max Maximum input current.
+curr1_max_alarm Input current high alarm.
+
+power1_label "pin"
+power1_input Measured input power.
+power1_average Average measured input power.
+power1_max Maximum input power limit.
+power1_alarm Input power alarm
+power1_input_highest Historical maximum power.
+power1_reset_history Write any value to reset maximum power history.
+
+temp1_input Measured temperature.
+temp1_max Maximum temperature.
+temp1_crit Critical high temperature.
+temp1_max_alarm Chip temperature high alarm.
+temp1_crit_alarm Chip temperature critical high alarm.
+======================= =======================================================
diff --git a/Documentation/hwmon/lm63.rst b/Documentation/hwmon/lm63.rst
new file mode 100644
index 000000000..9e27367d7
--- /dev/null
+++ b/Documentation/hwmon/lm63.rst
@@ -0,0 +1,95 @@
+Kernel driver lm63
+==================
+
+Supported chips:
+
+ * National Semiconductor LM63
+
+ Prefix: 'lm63'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/pf/LM/LM63.html
+
+ * National Semiconductor LM64
+
+ Prefix: 'lm64'
+
+ Addresses scanned: I2C 0x18 and 0x4e
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/pf/LM/LM64.html
+
+ * National Semiconductor LM96163
+
+ Prefix: 'lm96163'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/pf/LM/LM96163.html
+
+
+Author: Jean Delvare <jdelvare@suse.de>
+
+Thanks go to Tyan and especially Alex Buckingham for setting up a remote
+access to their S4882 test platform for this driver.
+
+ https://www.tyan.com/
+
+Description
+-----------
+
+The LM63 is a digital temperature sensor with integrated fan monitoring
+and control.
+
+The LM63 is basically an LM86 with fan speed monitoring and control
+capabilities added. It misses some of the LM86 features though:
+
+ - No low limit for local temperature.
+ - No critical limit for local temperature.
+ - Critical limit for remote temperature can be changed only once. We
+ will consider that the critical limit is read-only.
+
+The datasheet isn't very clear about what the tachometer reading is.
+
+An explanation from National Semiconductor: The two lower bits of the read
+value have to be masked out. The value is still 16 bit in width.
+
+All temperature values are given in degrees Celsius. Resolution is 1.0
+degree for the local temperature, 0.125 degree for the remote temperature.
+
+The fan speed is measured using a tachometer. Contrary to most chips which
+store the value in an 8-bit register and have a selectable clock divider
+to make sure that the result will fit in the register, the LM63 uses 16-bit
+value for measuring the speed of the fan. It can measure fan speeds down to
+83 RPM, at least in theory.
+
+Note that the pin used for fan monitoring is shared with an alert out
+function. Depending on how the board designer wanted to use the chip, fan
+speed monitoring will or will not be possible. The proper chip configuration
+is left to the BIOS, and the driver will blindly trust it. Only the original
+LM63 suffers from this limitation, the LM64 and LM96163 have separate pins
+for fan monitoring and alert out. On the LM64, monitoring is always enabled;
+on the LM96163 it can be disabled.
+
+A PWM output can be used to control the speed of the fan. The LM63 has two
+PWM modes: manual and automatic. Automatic mode is not fully implemented yet
+(you cannot define your custom PWM/temperature curve), and mode change isn't
+supported either.
+
+The lm63 driver will not update its values more frequently than configured with
+the update_interval sysfs attribute; reading them more often will do no harm,
+but will return 'old' values. Values in the automatic fan control lookup table
+(attributes pwm1_auto_*) have their own independent lifetime of 5 seconds.
+
+The LM64 is effectively an LM63 with GPIO lines. The driver does not
+support these GPIO lines at present.
+
+The LM96163 is an enhanced version of LM63 with improved temperature accuracy
+and better PWM resolution. For LM96163, the external temperature sensor type is
+configurable as CPU embedded diode(1) or 3904 transistor(2).
diff --git a/Documentation/hwmon/lm70.rst b/Documentation/hwmon/lm70.rst
new file mode 100644
index 000000000..11303a7e1
--- /dev/null
+++ b/Documentation/hwmon/lm70.rst
@@ -0,0 +1,69 @@
+Kernel driver lm70
+==================
+
+Supported chips:
+
+ * National Semiconductor LM70
+
+ Datasheet: http://www.national.com/pf/LM/LM70.html
+
+ * Texas Instruments TMP121/TMP123
+
+ Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html
+
+ * Texas Instruments TMP122/TMP124
+
+ Information: https://www.ti.com/product/tmp122
+
+ * Texas Instruments TMP125
+
+ Information: https://www.ti.com/product/tmp125
+
+ * National Semiconductor LM71
+
+ Datasheet: https://www.ti.com/product/LM71
+
+ * National Semiconductor LM74
+
+ Datasheet: https://www.ti.com/product/LM74
+
+
+Author:
+ Kaiwan N Billimoria <kaiwan@designergraphix.com>
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM70
+temperature sensor.
+
+The LM70 temperature sensor chip supports a single temperature sensor.
+It communicates with a host processor (or microcontroller) via an
+SPI/Microwire Bus interface.
+
+Communication with the LM70 is simple: when the temperature is to be sensed,
+the driver accesses the LM70 using SPI communication: 16 SCLK cycles
+comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's
+complement digital temperature (sent via the SIO line), is available in the
+driver for interpretation. This driver makes use of the kernel's in-core
+SPI support.
+
+As a real (in-tree) example of this "SPI protocol driver" interfacing
+with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c
+and its associated documentation.
+
+The LM74 and TMP121/TMP122/TMP123/TMP124 are very similar; main difference is
+13-bit temperature data (0.0625 degrees celsius resolution).
+
+The TMP122/TMP124 also feature configurable temperature thresholds.
+
+The TMP125 is less accurate and provides 10-bit temperature data
+with 0.25 degrees Celsius resolution.
+
+The LM71 is also very similar; main difference is 14-bit temperature
+data (0.03125 degrees celsius resolution).
+
+Thanks to
+---------
+Jean Delvare <jdelvare@suse.de> for mentoring the hwmon-side driver
+development.
diff --git a/Documentation/hwmon/lm73.rst b/Documentation/hwmon/lm73.rst
new file mode 100644
index 000000000..74e909be6
--- /dev/null
+++ b/Documentation/hwmon/lm73.rst
@@ -0,0 +1,98 @@
+Kernel driver lm73
+==================
+
+Supported chips:
+
+ * Texas Instruments LM73
+
+ Prefix: 'lm73'
+
+ Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4c, 0x4d, and 0x4e
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/product/lm73
+
+
+Author: Guillaume Ligneul <guillaume.ligneul@gmail.com>
+
+Documentation: Chris Verges <kg4ysn@gmail.com>
+
+
+Description
+-----------
+
+The LM73 is a digital temperature sensor. All temperature values are
+given in degrees Celsius.
+
+Measurement Resolution Support
+------------------------------
+
+The LM73 supports four resolutions, defined in terms of degrees C per
+LSB: 0.25, 0.125, 0.0625, and 0.3125. Changing the resolution mode
+affects the conversion time of the LM73's analog-to-digital converter.
+From userspace, the desired resolution can be specified as a function of
+conversion time via the 'update_interval' sysfs attribute for the
+device. This attribute will normalize ranges of input values to the
+maximum times defined for the resolution in the datasheet.
+
+ ============= ============= ============
+ Resolution Conv. Time Input Range
+ (C/LSB) (msec) (msec)
+ ============= ============= ============
+ 0.25 14 0..14
+ 0.125 28 15..28
+ 0.0625 56 29..56
+ 0.03125 112 57..infinity
+ ============= ============= ============
+
+The following examples show how the 'update_interval' attribute can be
+used to change the conversion time::
+
+ $ echo 0 > update_interval
+ $ cat update_interval
+ 14
+ $ cat temp1_input
+ 24250
+
+ $ echo 22 > update_interval
+ $ cat update_interval
+ 28
+ $ cat temp1_input
+ 24125
+
+ $ echo 56 > update_interval
+ $ cat update_interval
+ 56
+ $ cat temp1_input
+ 24062
+
+ $ echo 85 > update_interval
+ $ cat update_interval
+ 112
+ $ cat temp1_input
+ 24031
+
+As shown here, the lm73 driver automatically adjusts any user input for
+'update_interval' via a step function. Reading back the
+'update_interval' value after a write operation will confirm the
+conversion time actively in use.
+
+Mathematically, the resolution can be derived from the conversion time
+via the following function:
+
+ g(x) = 0.250 * [log(x/14) / log(2)]
+
+where 'x' is the output from 'update_interval' and 'g(x)' is the
+resolution in degrees C per LSB.
+
+Alarm Support
+-------------
+
+The LM73 features a simple over-temperature alarm mechanism. This
+feature is exposed via the sysfs attributes.
+
+The attributes 'temp1_max_alarm' and 'temp1_min_alarm' are flags
+provided by the LM73 that indicate whether the measured temperature has
+passed the 'temp1_max' and 'temp1_min' thresholds, respectively. These
+values _must_ be read to clear the registers on the LM73.
diff --git a/Documentation/hwmon/lm75.rst b/Documentation/hwmon/lm75.rst
new file mode 100644
index 000000000..8d0ab4ad5
--- /dev/null
+++ b/Documentation/hwmon/lm75.rst
@@ -0,0 +1,166 @@
+Kernel driver lm75
+==================
+
+Supported chips:
+
+ * National Semiconductor LM75
+
+ Prefix: 'lm75'
+
+ Addresses scanned: I2C 0x48 - 0x4f
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/
+
+ * National Semiconductor LM75A
+
+ Prefix: 'lm75a'
+
+ Addresses scanned: I2C 0x48 - 0x4f
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/
+
+ * Dallas Semiconductor (now Maxim) DS75, DS1775, DS7505
+
+ Prefixes: 'ds75', 'ds1775', 'ds7505'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Maxim website
+
+ https://www.maximintegrated.com/
+
+ * Maxim MAX6625, MAX6626, MAX31725, MAX31726
+
+ Prefixes: 'max6625', 'max6626', 'max31725', 'max31726'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/
+
+ * Microchip (TelCom) TCN75
+
+ Prefix: 'tcn75'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Microchip website
+
+ http://www.microchip.com/
+
+ * Microchip MCP9800, MCP9801, MCP9802, MCP9803
+
+ Prefix: 'mcp980x'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Microchip website
+
+ http://www.microchip.com/
+
+ * Analog Devices ADT75
+
+ Prefix: 'adt75'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ https://www.analog.com/adt75
+
+ * ST Microelectronics STDS75
+
+ Prefix: 'stds75'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the ST website
+
+ http://www.st.com/internet/analog/product/121769.jsp
+
+ * ST Microelectronics STLM75
+
+ Prefix: 'stlm75'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the ST website
+
+ https://www.st.com/resource/en/datasheet/stlm75.pdf
+
+ * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275, TMP1075
+
+ Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275', 'tmp1075'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/product/tmp100
+
+ https://www.ti.com/product/tmp101
+
+ https://www.ti.com/product/tmp105
+
+ https://www.ti.com/product/tmp112
+
+ https://www.ti.com/product/tmp75
+
+ https://www.ti.com/product/tmp75b
+
+ https://www.ti.com/product/tmp75c
+
+ https://www.ti.com/product/tmp175
+
+ https://www.ti.com/product/tmp275
+
+ https://www.ti.com/product/TMP1075
+
+ * NXP LM75B, PCT2075
+
+ Prefix: 'lm75b', 'pct2075'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the NXP website
+
+ https://www.nxp.com/documents/data_sheet/LM75B.pdf
+
+ https://www.nxp.com/docs/en/data-sheet/PCT2075.pdf
+
+Author: Frodo Looijaard <frodol@dds.nl>
+
+Description
+-----------
+
+The LM75 implements one temperature sensor. Limits can be set through the
+Overtemperature Shutdown register and Hysteresis register. Each value can be
+set and read to half-degree accuracy.
+An alarm is issued (usually to a connected LM78) when the temperature
+gets higher then the Overtemperature Shutdown value; it stays on until
+the temperature falls below the Hysteresis value.
+All temperatures are in degrees Celsius, and are guaranteed within a
+range of -55 to +125 degrees.
+
+The driver caches the values for a period varying between 1 second for the
+slowest chips and 125 ms for the fastest chips; reading it more often
+will do no harm, but will return 'old' values.
+
+The original LM75 was typically used in combination with LM78-like chips
+on PC motherboards, to measure the temperature of the processor(s). Clones
+are now used in various embedded designs.
+
+The LM75 is essentially an industry standard; there may be other
+LM75 clones not listed here, with or without various enhancements,
+that are supported. The clones are not detected by the driver, unless
+they reproduce the exact register tricks of the original LM75, and must
+therefore be instantiated explicitly. Higher resolution up to 16-bit
+is supported by this driver, other specific enhancements are not.
+
+The LM77 is not supported, contrary to what we pretended for a long time.
+Both chips are simply not compatible, value encoding differs.
diff --git a/Documentation/hwmon/lm77.rst b/Documentation/hwmon/lm77.rst
new file mode 100644
index 000000000..4ed3fe6b9
--- /dev/null
+++ b/Documentation/hwmon/lm77.rst
@@ -0,0 +1,45 @@
+Kernel driver lm77
+==================
+
+Supported chips:
+
+ * National Semiconductor LM77
+
+ Prefix: 'lm77'
+
+ Addresses scanned: I2C 0x48 - 0x4b
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/
+
+
+Author: Andras BALI <drewie@freemail.hu>
+
+Description
+-----------
+
+The LM77 implements one temperature sensor. The temperature
+sensor incorporates a band-gap type temperature sensor,
+10-bit ADC, and a digital comparator with user-programmable upper
+and lower limit values.
+
+The LM77 implements 3 limits: low (temp1_min), high (temp1_max) and
+critical (temp1_crit.) It also implements an hysteresis mechanism which
+applies to all 3 limits. The relative difference is stored in a single
+register on the chip, which means that the relative difference between
+the limit and its hysteresis is always the same for all 3 limits.
+
+This implementation detail implies the following:
+
+* When setting a limit, its hysteresis will automatically follow, the
+ difference staying unchanged. For example, if the old critical limit
+ was 80 degrees C, and the hysteresis was 75 degrees C, and you change
+ the critical limit to 90 degrees C, then the hysteresis will
+ automatically change to 85 degrees C.
+* All 3 hysteresis can't be set independently. We decided to make
+ temp1_crit_hyst writable, while temp1_min_hyst and temp1_max_hyst are
+ read-only. Setting temp1_crit_hyst writes the difference between
+ temp1_crit_hyst and temp1_crit into the chip, and the same relative
+ hysteresis applies automatically to the low and high limits.
+* The limits should be set before the hysteresis.
diff --git a/Documentation/hwmon/lm78.rst b/Documentation/hwmon/lm78.rst
new file mode 100644
index 000000000..cb7a4832f
--- /dev/null
+++ b/Documentation/hwmon/lm78.rst
@@ -0,0 +1,80 @@
+Kernel driver lm78
+==================
+
+Supported chips:
+
+ * National Semiconductor LM78 / LM78-J
+
+ Prefix: 'lm78'
+
+ Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/
+
+ * National Semiconductor LM79
+
+ Prefix: 'lm79'
+
+ Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/
+
+
+Authors:
+ - Frodo Looijaard <frodol@dds.nl>
+ - Jean Delvare <jdelvare@suse.de>
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM78, LM78-J
+and LM79. They are described as 'Microprocessor System Hardware Monitors'.
+
+There is almost no difference between the three supported chips. Functionally,
+the LM78 and LM78-J are exactly identical. The LM79 has one more VID line,
+which is used to report the lower voltages newer Pentium processors use.
+From here on, LM7* means either of these three types.
+
+The LM7* implements one temperature sensor, three fan rotation speed sensors,
+seven voltage sensors, VID lines, alarms, and some miscellaneous stuff.
+
+Temperatures are measured in degrees Celsius. An alarm is triggered once
+when the Overtemperature Shutdown limit is crossed; it is triggered again
+as soon as it drops below the Hysteresis value. A more useful behavior
+can be found by setting the Hysteresis value to +127 degrees Celsius; in
+this case, alarms are issued during all the time when the actual temperature
+is above the Overtemperature Shutdown value. Measurements are guaranteed
+between -55 and +125 degrees, with a resolution of 1 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 4.08 volts, with a resolution
+of 0.016 volt.
+
+The VID lines encode the core voltage value: the voltage level your processor
+should work with. This is hardcoded by the mainboard and/or processor itself.
+It is a value in volts. When it is unconnected, you will often find the
+value 3.50 V here.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.5 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The LM7* only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
diff --git a/Documentation/hwmon/lm80.rst b/Documentation/hwmon/lm80.rst
new file mode 100644
index 000000000..c53186abd
--- /dev/null
+++ b/Documentation/hwmon/lm80.rst
@@ -0,0 +1,74 @@
+Kernel driver lm80
+==================
+
+Supported chips:
+
+ * National Semiconductor LM80
+
+ Prefix: 'lm80'
+
+ Addresses scanned: I2C 0x28 - 0x2f
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/
+
+ * National Semiconductor LM96080
+
+ Prefix: 'lm96080'
+
+ Addresses scanned: I2C 0x28 - 0x2f
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/
+
+
+Authors:
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Philip Edelbrock <phil@netroedge.com>
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM80.
+It is described as a 'Serial Interface ACPI-Compatible Microprocessor
+System Hardware Monitor'. The LM96080 is a more recent incarnation,
+it is pin and register compatible, with a few additional features not
+yet supported by the driver.
+
+The LM80 implements one temperature sensor, two fan rotation speed sensors,
+seven voltage sensors, alarms, and some miscellaneous stuff.
+
+Temperatures are measured in degrees Celsius. There are two sets of limits
+which operate independently. When the HOT Temperature Limit is crossed,
+this will cause an alarm that will be reasserted until the temperature
+drops below the HOT Hysteresis. The Overtemperature Shutdown (OS) limits
+should work in the same way (but this must be checked; the datasheet
+is unclear about this). Measurements are guaranteed between -55 and
++125 degrees. The current temperature measurement has a resolution of
+0.0625 degrees; the limits have a resolution of 1 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 2.55 volts, with a resolution
+of 0.01 volt.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 2.0 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The LM80 only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
diff --git a/Documentation/hwmon/lm83.rst b/Documentation/hwmon/lm83.rst
new file mode 100644
index 000000000..ecf838199
--- /dev/null
+++ b/Documentation/hwmon/lm83.rst
@@ -0,0 +1,97 @@
+Kernel driver lm83
+==================
+
+Supported chips:
+
+ * National Semiconductor LM83
+
+ Prefix: 'lm83'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/pf/LM/LM83.html
+
+ * National Semiconductor LM82
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/pf/LM/LM82.html
+
+Author: Jean Delvare <jdelvare@suse.de>
+
+Description
+-----------
+
+The LM83 is a digital temperature sensor. It senses its own temperature as
+well as the temperature of up to three external diodes. The LM82 is
+a stripped down version of the LM83 that only supports one external diode.
+Both are compatible with many other devices such as the LM84 and all
+other ADM1021 clones. The main difference between the LM83 and the LM84
+in that the later can only sense the temperature of one external diode.
+
+Using the adm1021 driver for a LM83 should work, but only two temperatures
+will be reported instead of four.
+
+The LM83 is only found on a handful of motherboards. Both a confirmed
+list and an unconfirmed list follow. If you can confirm or infirm the
+fact that any of these motherboards do actually have an LM83, please
+contact us. Note that the LM90 can easily be misdetected as a LM83.
+
+Confirmed motherboards:
+ === =====
+ SBS P014
+ SBS PSL09
+ === =====
+
+Unconfirmed motherboards:
+ =========== ==========
+ Gigabyte GA-8IK1100
+ Iwill MPX2
+ Soltek SL-75DRV5
+ =========== ==========
+
+The LM82 is confirmed to have been found on most AMD Geode reference
+designs and test platforms.
+
+The driver has been successfully tested by Magnus Forsström, who I'd
+like to thank here. More testers will be of course welcome.
+
+The fact that the LM83 is only scarcely used can be easily explained.
+Most motherboards come with more than just temperature sensors for
+health monitoring. They also have voltage and fan rotation speed
+sensors. This means that temperature-only chips are usually used as
+secondary chips coupled with another chip such as an IT8705F or similar
+chip, which provides more features. Since systems usually need three
+temperature sensors (motherboard, processor, power supply) and primary
+chips provide some temperature sensors, the secondary chip, if needed,
+won't have to handle more than two temperatures. Thus, ADM1021 clones
+are sufficient, and there is no need for a four temperatures sensor
+chip such as the LM83. The only case where using an LM83 would make
+sense is on SMP systems, such as the above-mentioned Iwill MPX2,
+because you want an additional temperature sensor for each additional
+CPU.
+
+On the SBS P014, this is different, since the LM83 is the only hardware
+monitoring chipset. One temperature sensor is used for the motherboard
+(actually measuring the LM83's own temperature), one is used for the
+CPU. The two other sensors must be used to measure the temperature of
+two other points of the motherboard. We suspect these points to be the
+north and south bridges, but this couldn't be confirmed.
+
+All temperature values are given in degrees Celsius. Local temperature
+is given within a range of 0 to +85 degrees. Remote temperatures are
+given within a range of 0 to +125 degrees. Resolution is 1.0 degree,
+accuracy is guaranteed to 3.0 degrees (see the datasheet for more
+details).
+
+Each sensor has its own high limit, but the critical limit is common to
+all four sensors. There is no hysteresis mechanism as found on most
+recent temperature sensors.
+
+The lm83 driver will not update its values more frequently than every
+other second; reading them more often will do no harm, but will return
+'old' values.
diff --git a/Documentation/hwmon/lm85.rst b/Documentation/hwmon/lm85.rst
new file mode 100644
index 000000000..55e1d9cda
--- /dev/null
+++ b/Documentation/hwmon/lm85.rst
@@ -0,0 +1,286 @@
+Kernel driver lm85
+==================
+
+Supported chips:
+
+ * National Semiconductor LM85 (B and C versions)
+
+ Prefix: 'lm85b' or 'lm85c'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: http://www.national.com/pf/LM/LM85.html
+
+ * Texas Instruments LM96000
+
+ Prefix: 'lm9600'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: https://www.ti.com/lit/ds/symlink/lm96000.pdf
+
+ * Analog Devices ADM1027
+
+ Prefix: 'adm1027'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: https://www.onsemi.com/PowerSolutions/product.do?id=ADM1027
+
+ * Analog Devices ADT7463
+
+ Prefix: 'adt7463'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: https://www.onsemi.com/PowerSolutions/product.do?id=ADT7463
+
+ * Analog Devices ADT7468
+
+ Prefix: 'adt7468'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: https://www.onsemi.com/PowerSolutions/product.do?id=ADT7468
+
+ * SMSC EMC6D100, SMSC EMC6D101
+
+ Prefix: 'emc6d100'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: http://www.smsc.com/media/Downloads_Public/discontinued/6d100.pdf
+
+ * SMSC EMC6D102
+
+ Prefix: 'emc6d102'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: http://www.smsc.com/main/catalog/emc6d102.html
+
+ * SMSC EMC6D103
+
+ Prefix: 'emc6d103'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: http://www.smsc.com/main/catalog/emc6d103.html
+
+ * SMSC EMC6D103S
+
+ Prefix: 'emc6d103s'
+
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
+ Datasheet: http://www.smsc.com/main/catalog/emc6d103s.html
+
+Authors:
+ - Philip Pokorny <ppokorny@penguincomputing.com>,
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Richard Barrington <rich_b_nz@clear.net.nz>,
+ - Margit Schubert-While <margitsw@t-online.de>,
+ - Justin Thiessen <jthiessen@penguincomputing.com>
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM85 and
+compatible chips including the Analog Devices ADM1027, ADT7463, ADT7468 and
+SMSC EMC6D10x chips family.
+
+The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
+specification. Using an analog to digital converter it measures three (3)
+temperatures and five (5) voltages. It has four (4) 16-bit counters for
+measuring fan speed. Five (5) digital inputs are provided for sampling the
+VID signals from the processor to the VRM. Lastly, there are three (3) PWM
+outputs that can be used to control fan speed.
+
+The voltage inputs have internal scaling resistors so that the following
+voltage can be measured without external resistors:
+
+ 2.5V, 3.3V, 5V, 12V, and CPU core voltage (2.25V)
+
+The temperatures measured are one internal diode, and two remote diodes.
+Remote 1 is generally the CPU temperature. These inputs are designed to
+measure a thermal diode like the one in a Pentium 4 processor in a socket
+423 or socket 478 package. They can also measure temperature using a
+transistor like the 2N3904.
+
+A sophisticated control system for the PWM outputs is designed into the
+LM85 that allows fan speed to be adjusted automatically based on any of the
+three temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the LM85 will adjust the PWM outputs in
+response to the measured temperatures without further host intervention.
+This feature can also be disabled for manual control of the PWM's.
+
+Each of the measured inputs (voltage, temperature, fan speed) has
+corresponding high/low limit values. The LM85 will signal an ALARM if any
+measured value exceeds either limit.
+
+The LM85 samples all inputs continuously. The lm85 driver will not read
+the registers more often than once a second. Further, configuration data is
+only read once each 5 minutes. There is twice as much config data as
+measurements, so this would seem to be a worthwhile optimization.
+
+Special Features
+----------------
+
+The LM85 has four fan speed monitoring modes. The ADM1027 has only two.
+Both have special circuitry to compensate for PWM interactions with the
+TACH signal from the fans. The ADM1027 can be configured to measure the
+speed of a two wire fan, but the input conditioning circuitry is different
+for 3-wire and 2-wire mode. For this reason, the 2-wire fan modes are not
+exposed to user control. The BIOS should initialize them to the correct
+mode. If you've designed your own ADM1027, you'll have to modify the
+init_client function and add an insmod parameter to set this up.
+
+To smooth the response of fans to changes in temperature, the LM85 has an
+optional filter for smoothing temperatures. The ADM1027 has the same
+config option but uses it to rate limit the changes to fan speed instead.
+
+The ADM1027, ADT7463 and ADT7468 have a 10-bit ADC and can therefore
+measure temperatures with 0.25 degC resolution. They also provide an offset
+to the temperature readings that is automatically applied during
+measurement. This offset can be used to zero out any errors due to traces
+and placement. The documentation says that the offset is in 0.25 degC
+steps, but in initial testing of the ADM1027 it was 1.00 degC steps. Analog
+Devices has confirmed this "bug". The ADT7463 is reported to work as
+described in the documentation. The current lm85 driver does not show the
+offset register.
+
+The ADT7468 has a high-frequency PWM mode, where all PWM outputs are
+driven by a 22.5 kHz clock. This is a global mode, not per-PWM output,
+which means that setting any PWM frequency above 11.3 kHz will switch
+all 3 PWM outputs to a 22.5 kHz frequency. Conversely, setting any PWM
+frequency below 11.3 kHz will switch all 3 PWM outputs to a frequency
+between 10 and 100 Hz, which can then be tuned separately.
+
+See the vendor datasheets for more information. There is application note
+from National (AN-1260) with some additional information about the LM85.
+The Analog Devices datasheet is very detailed and describes a procedure for
+determining an optimal configuration for the automatic PWM control.
+
+The SMSC EMC6D100 & EMC6D101 monitor external voltages, temperatures, and
+fan speeds. They use this monitoring capability to alert the system to out
+of limit conditions and can automatically control the speeds of multiple
+fans in a PC or embedded system. The EMC6D101, available in a 24-pin SSOP
+package, and the EMC6D100, available in a 28-pin SSOP package, are designed
+to be register compatible. The EMC6D100 offers all the features of the
+EMC6D101 plus additional voltage monitoring and system control features.
+Unfortunately it is not possible to distinguish between the package
+versions on register level so these additional voltage inputs may read
+zero. EMC6D102 and EMC6D103 feature additional ADC bits thus extending precision
+of voltage and temperature channels.
+
+SMSC EMC6D103S is similar to EMC6D103, but does not support pwm#_auto_pwm_minctl
+and temp#_auto_temp_off.
+
+The LM96000 supports additional high frequency PWM modes (22.5 kHz, 24 kHz,
+25.7 kHz, 27.7 kHz and 30 kHz), which can be configured on a per-PWM basis.
+
+Hardware Configurations
+-----------------------
+
+The LM85 can be jumpered for 3 different SMBus addresses. There are
+no other hardware configuration options for the LM85.
+
+The lm85 driver detects both LM85B and LM85C revisions of the chip. See the
+datasheet for a complete description of the differences. Other than
+identifying the chip, the driver behaves no differently with regard to
+these two chips. The LM85B is recommended for new designs.
+
+The ADM1027, ADT7463 and ADT7468 chips have an optional SMBALERT output
+that can be used to signal the chipset in case a limit is exceeded or the
+temperature sensors fail. Individual sensor interrupts can be masked so
+they won't trigger SMBALERT. The SMBALERT output if configured replaces one
+of the other functions (PWM2 or IN0). This functionality is not implemented
+in current driver.
+
+The ADT7463 and ADT7468 also have an optional THERM output/input which can
+be connected to the processor PROC_HOT output. If available, the autofan
+control dynamic Tmin feature can be enabled to keep the system temperature
+within spec (just?!) with the least possible fan noise.
+
+Configuration Notes
+-------------------
+
+Besides standard interfaces driver adds following:
+
+* Temperatures and Zones
+
+Each temperature sensor is associated with a Zone. There are three
+sensors and therefore three zones (# 1, 2 and 3). Each zone has the following
+temperature configuration points:
+
+* temp#_auto_temp_off
+ - temperature below which fans should be off or spinning very low.
+* temp#_auto_temp_min
+ - temperature over which fans start to spin.
+* temp#_auto_temp_max
+ - temperature when fans spin at full speed.
+* temp#_auto_temp_crit
+ - temperature when all fans will run full speed.
+
+PWM Control
+^^^^^^^^^^^
+
+There are three PWM outputs. The LM85 datasheet suggests that the
+pwm3 output control both fan3 and fan4. Each PWM can be individually
+configured and assigned to a zone for its control value. Each PWM can be
+configured individually according to the following options.
+
+* pwm#_auto_pwm_min
+ - this specifies the PWM value for temp#_auto_temp_off
+ temperature. (PWM value from 0 to 255)
+
+* pwm#_auto_pwm_minctl
+ - this flags selects for temp#_auto_temp_off temperature
+ the behaviour of fans. Write 1 to let fans spinning at
+ pwm#_auto_pwm_min or write 0 to let them off.
+
+.. note::
+
+ It has been reported that there is a bug in the LM85 that causes
+ the flag to be associated with the zones not the PWMs. This
+ contradicts all the published documentation. Setting pwm#_min_ctl
+ in this case actually affects all PWMs controlled by zone '#'.
+
+PWM Controlling Zone selection
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+* pwm#_auto_channels
+ - controls zone that is associated with PWM
+
+Configuration choices:
+
+========== =============================================
+Value Meaning
+========== =============================================
+ 1 Controlled by Zone 1
+ 2 Controlled by Zone 2
+ 3 Controlled by Zone 3
+ 23 Controlled by higher temp of Zone 2 or 3
+ 123 Controlled by highest temp of Zone 1, 2 or 3
+ 0 PWM always 0% (off)
+ -1 PWM always 100% (full on)
+ -2 Manual control (write to 'pwm#' to set)
+========== =============================================
+
+The National LM85's have two vendor specific configuration
+features. Tach. mode and Spinup Control. For more details on these,
+see the LM85 datasheet or Application Note AN-1260. These features
+are not currently supported by the lm85 driver.
+
+The Analog Devices ADM1027 has several vendor specific enhancements.
+The number of pulses-per-rev of the fans can be set, Tach monitoring
+can be optimized for PWM operation, and an offset can be applied to
+the temperatures to compensate for systemic errors in the
+measurements. These features are not currently supported by the lm85
+driver.
+
+In addition to the ADM1027 features, the ADT7463 and ADT7468 also have
+Tmin control and THERM asserted counts. Automatic Tmin control acts to
+adjust the Tmin value to maintain the measured temperature sensor at a
+specified temperature. There isn't much documentation on this feature in
+the ADT7463 data sheet. This is not supported by current driver.
diff --git a/Documentation/hwmon/lm87.rst b/Documentation/hwmon/lm87.rst
new file mode 100644
index 000000000..b8fec5689
--- /dev/null
+++ b/Documentation/hwmon/lm87.rst
@@ -0,0 +1,86 @@
+Kernel driver lm87
+==================
+
+Supported chips:
+
+ * National Semiconductor LM87
+
+ Prefix: 'lm87'
+
+ Addresses scanned: I2C 0x2c - 0x2e
+
+ Datasheet: http://www.national.com/pf/LM/LM87.html
+
+ * Analog Devices ADM1024
+
+ Prefix: 'adm1024'
+
+ Addresses scanned: I2C 0x2c - 0x2e
+
+ Datasheet: https://www.analog.com/en/prod/0,2877,ADM1024,00.html
+
+
+Authors:
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Philip Edelbrock <phil@netroedge.com>,
+ - Mark Studebaker <mdsxyz123@yahoo.com>,
+ - Stephen Rousset <stephen.rousset@rocketlogix.com>,
+ - Dan Eaton <dan.eaton@rocketlogix.com>,
+ - Jean Delvare <jdelvare@suse.de>,
+ - Original 2.6 port Jeff Oliver
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM87
+and the Analog Devices ADM1024.
+
+The LM87 implements up to three temperature sensors, up to two fan
+rotation speed sensors, up to seven voltage sensors, alarms, and some
+miscellaneous stuff. The ADM1024 is fully compatible.
+
+Temperatures are measured in degrees Celsius. Each input has a high
+and low alarm settings. A high limit produces an alarm when the value
+goes above it, and an alarm is also produced when the value goes below
+the low limit.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in
+volts. An alarm is triggered if the voltage has crossed a programmable
+minimum or maximum limit. Note that minimum in this case always means
+'closest to zero'; this is important for negative voltage measurements.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.0 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The lm87 driver only updates its values each 1.0 seconds; reading it more
+often will do no harm, but will return 'old' values.
+
+
+Hardware Configurations
+-----------------------
+
+The LM87 has four pins which can serve one of two possible functions,
+depending on the hardware configuration.
+
+Some functions share pins, so not all functions are available at the same
+time. Which are depends on the hardware setup. This driver normally
+assumes that firmware configured the chip correctly. Where this is not
+the case, platform code must set the I2C client's platform_data to point
+to a u8 value to be written to the channel register.
+
+For reference, here is the list of exclusive functions:
+ - in0+in5 (default) or temp3
+ - fan1 (default) or in6
+ - fan2 (default) or in7
+ - VID lines (default) or IRQ lines (not handled by this driver)
diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst
new file mode 100644
index 000000000..23af17a0a
--- /dev/null
+++ b/Documentation/hwmon/lm90.rst
@@ -0,0 +1,641 @@
+Kernel driver lm90
+==================
+
+Supported chips:
+
+ * National Semiconductor LM84
+
+ Prefix: 'lm84'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ * National Semiconductor LM90
+
+ Prefix: 'lm90'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/pf/LM/LM90.html
+
+ * National Semiconductor LM89
+
+ Prefix: 'lm89' (no auto-detection)
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/mpf/LM/LM89.html
+
+ * National Semiconductor LM99
+
+ Prefix: 'lm99'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/pf/LM/LM99.html
+
+ * National Semiconductor LM86
+
+ Prefix: 'lm86'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the National Semiconductor website
+
+ http://www.national.com/mpf/LM/LM86.html
+
+ * Analog Devices ADM1020
+
+ Prefix: 'adm1020'
+
+ Addresses scanned: I2C 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ * Analog Devices ADM1021
+
+ Prefix: 'adm1021'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ * Analog Devices ADM1021A/ADM1023
+
+ Prefix: 'adm1023'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Analog Devices website
+
+ * Analog Devices ADM1032
+
+ Prefix: 'adm1032'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADM1032
+
+ * Analog Devices ADT7461
+
+ Prefix: 'adt7461'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADT7461
+
+ * Analog Devices ADT7461A
+
+ Prefix: 'adt7461a'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A
+
+ * Analog Devices ADT7481
+
+ Prefix: 'adt7481'
+
+ Addresses scanned: I2C 0x4b and 0x4c
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADT7481
+
+ * Analog Devices ADT7482
+
+ Prefix: 'adt7482'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADT7482
+
+ * Analog Devices ADT7483A
+
+ Prefix: 'adt7483a'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=ADT7483A
+
+ * ON Semiconductor NCT1008
+
+ Prefix: 'nct1008'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
+
+ * ON Semiconductor NCT210
+
+ Prefix: 'adm1021'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT210
+
+ * ON Semiconductor NCT214
+
+ Prefix: 'nct214'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT214
+
+ * ON Semiconductor NCT218
+
+ Prefix: 'nct218'
+
+ Addresses scanned: I2C 0x4c - 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT218
+
+ * ON Semiconductor NCT72
+
+ Prefix: 'nct72'
+
+ Addresses scanned: I2C 0x4c - 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT72
+
+ * Maxim MAX1617
+
+ Prefix: 'max1617'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ * Maxim MAX1617A
+
+ Prefix: 'max1617a'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ * Maxim MAX6642
+
+ Prefix: 'max6642'
+
+ Addresses scanned: I2C 0x48-0x4f
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf
+
+ * Maxim MAX6646
+
+ Prefix: 'max6646'
+
+ Addresses scanned: I2C 0x4d
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+
+ * Maxim MAX6647
+
+ Prefix: 'max6646'
+
+ Addresses scanned: I2C 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+
+ * Maxim MAX6648
+
+ Prefix: 'max6648'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+
+ * Maxim MAX6649
+
+ Prefix: 'max6646'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+
+ * Maxim MAX6654
+
+ Prefix: 'max6654'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+
+ 0x4c, 0x4d and 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ https://www.maximintegrated.com/en/products/sensors/MAX6654.html
+
+ * Maxim MAX6657
+
+ Prefix: 'max6657'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+
+ * Maxim MAX6658
+
+ Prefix: 'max6657'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+
+ * Maxim MAX6659
+
+ Prefix: 'max6659'
+
+ Addresses scanned: I2C 0x4c, 0x4d, 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+
+ * Maxim MAX6680
+
+ Prefix: 'max6680'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+
+ 0x4c, 0x4d and 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+
+ * Maxim MAX6681
+
+ Prefix: 'max6680'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+
+ 0x4c, 0x4d and 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+
+ * Maxim MAX6692
+
+ Prefix: 'max6648'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+
+ * Maxim MAX6695
+
+ Prefix: 'max6695'
+
+ Addresses scanned: I2C 0x18
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+
+ * Maxim MAX6696
+
+ Prefix: 'max6695'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+
+ 0x4c, 0x4d and 0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+
+ * Winbond/Nuvoton W83L771W/G
+
+ Prefix: 'w83l771'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: No longer available
+
+ * Winbond/Nuvoton W83L771AWG/ASG
+
+ Prefix: 'w83l771'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Not publicly available, can be requested from Nuvoton
+
+ * Philips/NXP SA56004X
+
+ Prefix: 'sa56004'
+
+ Addresses scanned: I2C 0x48 through 0x4F
+
+ Datasheet: Publicly available at NXP website
+
+ http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf
+
+ * GMT G781
+
+ Prefix: 'g781'
+
+ Addresses scanned: I2C 0x4c, 0x4d
+
+ Datasheet: Not publicly available from GMT
+
+ * Texas Instruments TMP451
+
+ Prefix: 'tmp451'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: Publicly available at TI website
+
+ https://www.ti.com/litv/pdf/sbos686
+
+ * Texas Instruments TMP461
+
+ Prefix: 'tmp461'
+
+ Addresses scanned: I2C 0x48 through 0x4F
+
+ Datasheet: Publicly available at TI website
+
+ https://www.ti.com/lit/gpn/tmp461
+
+ * Philips NE1617, NE1617A
+
+ Prefix: 'max1617' (probably detected as a max1617)
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheets: Publicly available at the Philips website
+
+ * Philips NE1618
+
+ Prefix: 'ne1618'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheets: Publicly available at the Philips website
+
+ * Genesys Logic GL523SM
+
+ Prefix: 'gl523sm'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet:
+
+ * TI THMC10
+
+ Prefix: 'thmc10'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the TI website
+
+ * Onsemi MC1066
+
+ Prefix: 'mc1066'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the Onsemi website
+
+Author: Jean Delvare <jdelvare@suse.de>
+
+
+Description
+-----------
+
+The LM90 is a digital temperature sensor. It senses its own temperature as
+well as the temperature of up to one external diode. It is compatible
+with many other devices, many of which are supported by this driver.
+
+The family of chips supported by this driver is derived from MAX1617.
+This chip as well as various compatible chips support a local and a remote
+temperature sensor with 8 bit accuracy. Later chips provide improved accuracy
+and other additional features such as hysteresis and temperature offset
+registers.
+
+Note that there is no easy way to differentiate between the MAX6657,
+MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only
+supported by this driver if the chip is located at address 0x4d or 0x4e,
+or if the chip type is explicitly selected as max6659.
+The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously
+can't (and don't need to) be distinguished.
+
+The different chipsets of the family are not strictly identical, although
+very similar. For reference, here comes a non-exhaustive list of specific
+features:
+
+LM84:
+ * 8 bit sensor resolution
+
+ADM1020, ADM1021, GL523SM, MAX1617, NE1617, NE1617A, THMC10:
+ * 8 bit sensor resolution
+ * Low temperature limits
+
+NCT210, NE1618:
+ * 11 bit sensor resolution for remote temperature sensor
+ * Low temperature limits
+
+ADM1021A, ADM1023:
+ * Temperature offset register for remote temperature sensor
+ * 11 bit resolution for remote temperature sensor
+ * Low temperature limits
+
+LM90:
+ * 11 bit resolution for remote temperature sensor
+ * Temperature offset register for remote temperature sensor
+ * Low and critical temperature limits
+ * Configurable conversion rate
+ * Filter and alert configuration register at 0xBF.
+ * ALERT is triggered by temperatures over critical limits.
+
+LM86 and LM89:
+ * Same as LM90
+ * Better external channel accuracy
+
+LM99:
+ * Same as LM89
+ * External temperature shifted by 16 degrees down
+
+ADM1032:
+ * Consecutive alert register at 0x22.
+ * Conversion averaging.
+ * Up to 64 conversions/s.
+ * ALERT is triggered by open remote sensor.
+ * SMBus PEC support for Write Byte and Receive Byte transactions.
+
+ADT7461, ADT7461A, NCT1008:
+ * Extended temperature range (breaks compatibility)
+ * Lower resolution for remote temperature
+ * SMBus PEC support for Write Byte and Receive Byte transactions.
+ * 10 bit temperature resolution
+
+ADT7481, ADT7482, ADT7483:
+ * Temperature offset register
+ * SMBus PEC support
+ * 10 bit temperature resolution for external sensors
+ * Two remote sensors
+ * Selectable address (ADT7483)
+
+MAX6642:
+ * No critical limit register
+ * Conversion rate not configurable
+ * Better local resolution (10 bit)
+ * 10 bit external sensor resolution
+
+MAX6646, MAX6647, MAX6649:
+ * Better local resolution
+ * Extended range unsigned external temperature
+
+MAX6648, MAX6692:
+ * Better local resolution
+ * Unsigned temperature
+
+MAX6654, MAX6690:
+ * Better local resolution
+ * Selectable address
+ * Remote sensor type selection
+ * Extended temperature range
+ * Extended resolution only available when conversion rate <= 1 Hz
+
+MAX6657 and MAX6658:
+ * Better local resolution
+ * Remote sensor type selection
+
+MAX6659:
+ * Better local resolution
+ * Selectable address
+ * Second critical temperature limit
+ * Remote sensor type selection
+
+MAX6680 and MAX6681:
+ * Selectable address
+ * Remote sensor type selection
+
+MAX6695 and MAX6696:
+ * Better local resolution
+ * Selectable address (max6696)
+ * Second critical temperature limit
+ * Two remote sensors
+
+W83L771W/G
+ * The G variant is lead-free, otherwise similar to the W.
+ * Filter and alert configuration register at 0xBF
+ * Moving average (depending on conversion rate)
+
+W83L771AWG/ASG
+ * Successor of the W83L771W/G, same features.
+ * The AWG and ASG variants only differ in package format.
+ * Diode ideality factor configuration (remote sensor) at 0xE3
+
+SA56004X:
+ * Better local resolution
+
+All temperature values are given in degrees Celsius. Resolution
+is 1.0 degree for the local temperature, 0.125 degree for the remote
+temperature, except for the MAX6654, MAX6657, MAX6658 and MAX6659 which have
+a resolution of 0.125 degree for both temperatures.
+
+Each sensor has its own high and low limits, plus a critical limit.
+Additionally, there is a relative hysteresis value common to both critical
+values. To make life easier to user-space applications, two absolute values
+are exported, one for each channel, but these values are of course linked.
+Only the local hysteresis can be set from user-space, and the same delta
+applies to the remote hysteresis.
+
+The lm90 driver will not update its values more frequently than configured with
+the update_interval attribute; reading them more often will do no harm, but will
+return 'old' values.
+
+SMBus Alert Support
+-------------------
+
+This driver has basic support for SMBus alert. When an alert is received,
+the status register is read and the faulty temperature channel is logged.
+
+The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON
+Semiconductor chips (NCT1008) do not implement the SMBus alert protocol
+properly so additional care is needed: the ALERT output is disabled when
+an alert is received, and is re-enabled only when the alarm is gone.
+Otherwise the chip would block alerts from other chips in the bus as long
+as the alarm is active.
+
+PEC Support
+-----------
+
+The ADM1032 is the only chip of the family which supports PEC. It does
+not support PEC on all transactions though, so some care must be taken.
+
+When reading a register value, the PEC byte is computed and sent by the
+ADM1032 chip. However, in the case of a combined transaction (SMBus Read
+Byte), the ADM1032 computes the CRC value over only the second half of
+the message rather than its entirety, because it thinks the first half
+of the message belongs to a different transaction. As a result, the CRC
+value differs from what the SMBus master expects, and all reads fail.
+
+For this reason, the lm90 driver will enable PEC for the ADM1032 only if
+the bus supports the SMBus Send Byte and Receive Byte transaction types.
+These transactions will be used to read register values, instead of
+SMBus Read Byte, and PEC will work properly.
+
+Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC.
+Instead, it will try to write the PEC value to the register (because the
+SMBus Send Byte transaction with PEC is similar to a Write Byte transaction
+without PEC), which is not what we want. Thus, PEC is explicitly disabled
+on SMBus Send Byte transactions in the lm90 driver.
+
+PEC on byte data transactions represents a significant increase in bandwidth
+usage (+33% for writes, +25% for reads) in normal conditions. With the need
+to use two SMBus transaction for reads, this overhead jumps to +50%. Worse,
+two transactions will typically mean twice as much delay waiting for
+transaction completion, effectively doubling the register cache refresh time.
+I guess reliability comes at a price, but it's quite expensive this time.
+
+So, as not everyone might enjoy the slowdown, PEC is disabled by default and
+can be enabled through sysfs. Just write 1 to the "pec" file and PEC will be
+enabled. Write 0 to that file to disable PEC again.
diff --git a/Documentation/hwmon/lm92.rst b/Documentation/hwmon/lm92.rst
new file mode 100644
index 000000000..c131b923e
--- /dev/null
+++ b/Documentation/hwmon/lm92.rst
@@ -0,0 +1,48 @@
+Kernel driver lm92
+==================
+
+Supported chips:
+
+ * National Semiconductor LM92
+
+ Prefix: 'lm92'
+
+ Addresses scanned: I2C 0x48 - 0x4b
+
+ Datasheet: http://www.national.com/pf/LM/LM92.html
+
+ * National Semiconductor LM76
+
+ Prefix: 'lm92'
+
+ Addresses scanned: none, force parameter needed
+
+ Datasheet: http://www.national.com/pf/LM/LM76.html
+
+ * Maxim MAX6633/MAX6634/MAX6635
+
+ Prefix: 'max6635'
+
+ Addresses scanned: none, force parameter needed
+
+ Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
+
+
+Authors:
+ - Abraham van der Merwe <abraham@2d3d.co.za>
+ - Jean Delvare <jdelvare@suse.de>
+
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM92
+temperature sensor.
+
+Each LM92 temperature sensor supports a single temperature sensor. There are
+alarms for high, low, and critical thresholds. There's also an hysteresis to
+control the thresholds for resetting alarms.
+
+Support was added later for the LM76 and Maxim MAX6633/MAX6634/MAX6635,
+which are mostly compatible. They have not all been tested, so you
+may need to use the force parameter.
diff --git a/Documentation/hwmon/lm93.rst b/Documentation/hwmon/lm93.rst
new file mode 100644
index 000000000..369e15898
--- /dev/null
+++ b/Documentation/hwmon/lm93.rst
@@ -0,0 +1,312 @@
+Kernel driver lm93
+==================
+
+Supported chips:
+
+ * National Semiconductor LM93
+
+ Prefix 'lm93'
+
+ Addresses scanned: I2C 0x2c-0x2e
+
+ Datasheet: http://www.national.com/ds.cgi/LM/LM93.pdf
+
+ * National Semiconductor LM94
+
+ Prefix 'lm94'
+
+ Addresses scanned: I2C 0x2c-0x2e
+
+ Datasheet: http://www.national.com/ds.cgi/LM/LM94.pdf
+
+
+Authors:
+ - Mark M. Hoffman <mhoffman@lightlink.com>
+ - Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com>
+ - Adapted to 2.6.20 by Carsten Emde <ce@osadl.org>
+ - Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
+
+Module Parameters
+-----------------
+
+* init: integer
+ Set to non-zero to force some initializations (default is 0).
+* disable_block: integer
+ A "0" allows SMBus block data transactions if the host supports them. A "1"
+ disables SMBus block data transactions. The default is 0.
+* vccp_limit_type: integer array (2)
+ Configures in7 and in8 limit type, where 0 means absolute and non-zero
+ means relative. "Relative" here refers to "Dynamic Vccp Monitoring using
+ VID" from the datasheet. It greatly simplifies the interface to allow
+ only one set of limits (absolute or relative) to be in operation at a
+ time (even though the hardware is capable of enabling both). There's
+ not a compelling use case for enabling both at once, anyway. The default
+ is "0,0".
+* vid_agtl: integer
+ A "0" configures the VID pins for V(ih) = 2.1V min, V(il) = 0.8V max.
+ A "1" configures the VID pins for V(ih) = 0.8V min, V(il) = 0.4V max.
+ (The latter setting is referred to as AGTL+ Compatible in the datasheet.)
+ I.e. this parameter controls the VID pin input thresholds; if your VID
+ inputs are not working, try changing this. The default value is "0".
+
+
+Hardware Description
+--------------------
+
+(from the datasheet)
+
+The LM93 hardware monitor has a two wire digital interface compatible with
+SMBus 2.0. Using an 8-bit ADC, the LM93 measures the temperature of two remote
+diode connected transistors as well as its own die and 16 power supply
+voltages. To set fan speed, the LM93 has two PWM outputs that are each
+controlled by up to four temperature zones. The fancontrol algorithm is lookup
+table based. The LM93 includes a digital filter that can be invoked to smooth
+temperature readings for better control of fan speed. The LM93 has four
+tachometer inputs to measure fan speed. Limit and status registers for all
+measured values are included. The LM93 builds upon the functionality of
+previous motherboard management ASICs and uses some of the LM85's features
+(i.e. smart tachometer mode). It also adds measurement and control support
+for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual
+processor Xeon class motherboard with a minimum of external components.
+
+LM94 is also supported in LM93 compatible mode. Extra sensors and features of
+LM94 are not supported.
+
+
+User Interface
+--------------
+
+#PROCHOT
+^^^^^^^^
+
+The LM93 can monitor two #PROCHOT signals. The results are found in the
+sysfs files prochot1, prochot2, prochot1_avg, prochot2_avg, prochot1_max,
+and prochot2_max. prochot1_max and prochot2_max contain the user limits
+for #PROCHOT1 and #PROCHOT2, respectively. prochot1 and prochot2 contain
+the current readings for the most recent complete time interval. The
+value of prochot1_avg and prochot2_avg is something like a 2 period
+exponential moving average (but not quite - check the datasheet). Note
+that this third value is calculated by the chip itself. All values range
+from 0-255 where 0 indicates no throttling, and 255 indicates > 99.6%.
+
+The monitoring intervals for the two #PROCHOT signals is also configurable.
+These intervals can be found in the sysfs files prochot1_interval and
+prochot2_interval. The values in these files specify the intervals for
+#P1_PROCHOT and #P2_PROCHOT, respectively. Selecting a value not in this
+list will cause the driver to use the next largest interval. The available
+intervals are (in seconds):
+
+#PROCHOT intervals:
+ 0.73, 1.46, 2.9, 5.8, 11.7, 23.3, 46.6, 93.2, 186, 372
+
+It is possible to configure the LM93 to logically short the two #PROCHOT
+signals. I.e. when #P1_PROCHOT is asserted, the LM93 will automatically
+assert #P2_PROCHOT, and vice-versa. This mode is enabled by writing a
+non-zero integer to the sysfs file prochot_short.
+
+The LM93 can also override the #PROCHOT pins by driving a PWM signal onto
+one or both of them. When overridden, the signal has a period of 3.56 ms,
+a minimum pulse width of 5 clocks (at 22.5kHz => 6.25% duty cycle), and
+a maximum pulse width of 80 clocks (at 22.5kHz => 99.88% duty cycle).
+
+The sysfs files prochot1_override and prochot2_override contain boolean
+integers which enable or disable the override function for #P1_PROCHOT and
+#P2_PROCHOT, respectively. The sysfs file prochot_override_duty_cycle
+contains a value controlling the duty cycle for the PWM signal used when
+the override function is enabled. This value ranges from 0 to 15, with 0
+indicating minimum duty cycle and 15 indicating maximum.
+
+#VRD_HOT
+^^^^^^^^
+
+The LM93 can monitor two #VRD_HOT signals. The results are found in the
+sysfs files vrdhot1 and vrdhot2. There is one value per file: a boolean for
+which 1 indicates #VRD_HOT is asserted and 0 indicates it is negated. These
+files are read-only.
+
+Smart Tach Mode (from the datasheet)::
+
+ If a fan is driven using a low-side drive PWM, the tachometer
+ output of the fan is corrupted. The LM93 includes smart tachometer
+ circuitry that allows an accurate tachometer reading to be
+ achieved despite the signal corruption. In smart tach mode all
+ four signals are measured within 4 seconds.
+
+Smart tach mode is enabled by the driver by writing 1 or 2 (associating the
+fan tachometer with a pwm) to the sysfs file fan<n>_smart_tach. A zero
+will disable the function for that fan. Note that Smart tach mode cannot be
+enabled if the PWM output frequency is 22500 Hz (see below).
+
+Manual PWM
+^^^^^^^^^^
+
+The LM93 has a fixed or override mode for the two PWM outputs (although, there
+are still some conditions that will override even this mode - see section
+15.10.6 of the datasheet for details.) The sysfs files pwm1_override
+and pwm2_override are used to enable this mode; each is a boolean integer
+where 0 disables and 1 enables the manual control mode. The sysfs files pwm1
+and pwm2 are used to set the manual duty cycle; each is an integer (0-255)
+where 0 is 0% duty cycle, and 255 is 100%. Note that the duty cycle values
+are constrained by the hardware. Selecting a value which is not available
+will cause the driver to use the next largest value. Also note: when manual
+PWM mode is disabled, the value of pwm1 and pwm2 indicates the current duty
+cycle chosen by the h/w.
+
+PWM Output Frequency
+^^^^^^^^^^^^^^^^^^^^
+
+The LM93 supports several different frequencies for the PWM output channels.
+The sysfs files pwm1_freq and pwm2_freq are used to select the frequency. The
+frequency values are constrained by the hardware. Selecting a value which is
+not available will cause the driver to use the next largest value. Also note
+that this parameter has implications for the Smart Tach Mode (see above).
+
+PWM Output Frequencies (in Hz):
+ 12, 36, 48, 60, 72, 84, 96, 22500 (default)
+
+Automatic PWM
+^^^^^^^^^^^^^
+
+The LM93 is capable of complex automatic fan control, with many different
+points of configuration. To start, each PWM output can be bound to any
+combination of eight control sources. The final PWM is the largest of all
+individual control sources to which the PWM output is bound.
+
+The eight control sources are: temp1-temp4 (aka "zones" in the datasheet),
+#PROCHOT 1 & 2, and #VRDHOT 1 & 2. The bindings are expressed as a bitmask
+in the sysfs files pwm<n>_auto_channels, where a "1" enables the binding, and
+a "0" disables it. The h/w default is 0x0f (all temperatures bound).
+
+ ====== ===========
+ 0x01 Temp 1
+ 0x02 Temp 2
+ 0x04 Temp 3
+ 0x08 Temp 4
+ 0x10 #PROCHOT 1
+ 0x20 #PROCHOT 2
+ 0x40 #VRDHOT 1
+ 0x80 #VRDHOT 2
+ ====== ===========
+
+The function y = f(x) takes a source temperature x to a PWM output y. This
+function of the LM93 is derived from a base temperature and a table of 12
+temperature offsets. The base temperature is expressed in degrees C in the
+sysfs files temp<n>_auto_base. The offsets are expressed in cumulative
+degrees C, with the value of offset <i> for temperature value <n> being
+contained in the file temp<n>_auto_offset<i>. E.g. if the base temperature
+is 40C:
+
+ ========== ======================= =============== =======
+ offset # temp<n>_auto_offset<i> range pwm
+ ========== ======================= =============== =======
+ 1 0 - 25.00%
+ 2 0 - 28.57%
+ 3 1 40C - 41C 32.14%
+ 4 1 41C - 42C 35.71%
+ 5 2 42C - 44C 39.29%
+ 6 2 44C - 46C 42.86%
+ 7 2 48C - 50C 46.43%
+ 8 2 50C - 52C 50.00%
+ 9 2 52C - 54C 53.57%
+ 10 2 54C - 56C 57.14%
+ 11 2 56C - 58C 71.43%
+ 12 2 58C - 60C 85.71%
+ - - > 60C 100.00%
+ ========== ======================= =============== =======
+
+Valid offsets are in the range 0C <= x <= 7.5C in 0.5C increments.
+
+There is an independent base temperature for each temperature channel. Note,
+however, there are only two tables of offsets: one each for temp[12] and
+temp[34]. Therefore, any change to e.g. temp1_auto_offset<i> will also
+affect temp2_auto_offset<i>.
+
+The LM93 can also apply hysteresis to the offset table, to prevent unwanted
+oscillation between two steps in the offsets table. These values are found in
+the sysfs files temp<n>_auto_offset_hyst. The value in this file has the
+same representation as in temp<n>_auto_offset<i>.
+
+If a temperature reading falls below the base value for that channel, the LM93
+will use the minimum PWM value. These values are found in the sysfs files
+temp<n>_auto_pwm_min. Note, there are only two minimums: one each for temp[12]
+and temp[34]. Therefore, any change to e.g. temp1_auto_pwm_min will also
+affect temp2_auto_pwm_min.
+
+PWM Spin-Up Cycle
+^^^^^^^^^^^^^^^^^
+
+A spin-up cycle occurs when a PWM output is commanded from 0% duty cycle to
+some value > 0%. The LM93 supports a minimum duty cycle during spin-up. These
+values are found in the sysfs files pwm<n>_auto_spinup_min. The value in this
+file has the same representation as other PWM duty cycle values. The
+duration of the spin-up cycle is also configurable. These values are found in
+the sysfs files pwm<n>_auto_spinup_time. The value in this file is
+the spin-up time in seconds. The available spin-up times are constrained by
+the hardware. Selecting a value which is not available will cause the driver
+to use the next largest value.
+
+Spin-up Durations:
+ 0 (disabled, h/w default), 0.1, 0.25, 0.4, 0.7, 1.0, 2.0, 4.0
+
+#PROCHOT and #VRDHOT PWM Ramping
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If the #PROCHOT or #VRDHOT signals are asserted while bound to a PWM output
+channel, the LM93 will ramp the PWM output up to 100% duty cycle in discrete
+steps. The duration of each step is configurable. There are two files, with
+one value each in seconds: pwm_auto_prochot_ramp and pwm_auto_vrdhot_ramp.
+The available ramp times are constrained by the hardware. Selecting a value
+which is not available will cause the driver to use the next largest value.
+
+Ramp Times:
+ 0 (disabled, h/w default) to 0.75 in 0.05 second intervals
+
+Fan Boost
+^^^^^^^^^
+
+For each temperature channel, there is a boost temperature: if the channel
+exceeds this limit, the LM93 will immediately drive both PWM outputs to 100%.
+This limit is expressed in degrees C in the sysfs files temp<n>_auto_boost.
+There is also a hysteresis temperature for this function: after the boost
+limit is reached, the temperature channel must drop below this value before
+the boost function is disabled. This temperature is also expressed in degrees
+C in the sysfs files temp<n>_auto_boost_hyst.
+
+GPIO Pins
+^^^^^^^^^
+
+The LM93 can monitor the logic level of four dedicated GPIO pins as well as the
+four tach input pins. GPIO0-GPIO3 correspond to (fan) tach 1-4, respectively.
+All eight GPIOs are read by reading the bitmask in the sysfs file gpio. The
+LSB is GPIO0, and the MSB is GPIO7.
+
+
+LM93 Unique sysfs Files
+-----------------------
+
+=========================== ===============================================
+file description
+=========================== ===============================================
+prochot<n> current #PROCHOT %
+prochot<n>_avg moving average #PROCHOT %
+prochot<n>_max limit #PROCHOT %
+prochot_short enable or disable logical #PROCHOT pin short
+prochot<n>_override force #PROCHOT assertion as PWM
+prochot_override_duty_cycle duty cycle for the PWM signal used when
+ #PROCHOT is overridden
+prochot<n>_interval #PROCHOT PWM sampling interval
+vrdhot<n> 0 means negated, 1 means asserted
+fan<n>_smart_tach enable or disable smart tach mode
+pwm<n>_auto_channels select control sources for PWM outputs
+pwm<n>_auto_spinup_min minimum duty cycle during spin-up
+pwm<n>_auto_spinup_time duration of spin-up
+pwm_auto_prochot_ramp ramp time per step when #PROCHOT asserted
+pwm_auto_vrdhot_ramp ramp time per step when #VRDHOT asserted
+temp<n>_auto_base temperature channel base
+temp<n>_auto_offset[1-12] temperature channel offsets
+temp<n>_auto_offset_hyst temperature channel offset hysteresis
+temp<n>_auto_boost temperature channel boost (PWMs to 100%)
+ limit
+temp<n>_auto_boost_hyst temperature channel boost hysteresis
+gpio input state of 8 GPIO pins; read-only
+=========================== ===============================================
diff --git a/Documentation/hwmon/lm95234.rst b/Documentation/hwmon/lm95234.rst
new file mode 100644
index 000000000..a44e8f529
--- /dev/null
+++ b/Documentation/hwmon/lm95234.rst
@@ -0,0 +1,48 @@
+Kernel driver lm95234
+=====================
+
+Supported chips:
+
+ * National Semiconductor / Texas Instruments LM95233
+
+ Addresses scanned: I2C 0x18, 0x2a, 0x2b
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/product/lm95233
+
+ * National Semiconductor / Texas Instruments LM95234
+
+ Addresses scanned: I2C 0x18, 0x4d, 0x4e
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/product/lm95234
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+LM95233 and LM95234 are 11-bit digital temperature sensors with a 2-wire
+System Management Bus (SMBus) interface and TrueTherm technology
+that can very accurately monitor the temperature of two (LM95233)
+or four (LM95234) remote diodes as well as its own temperature.
+The remote diodes can be external devices such as microprocessors,
+graphics processors or diode-connected 2N3904s. The chip's TruTherm
+beta compensation technology allows sensing of 90 nm or 65 nm process
+thermal diodes accurately.
+
+All temperature values are given in millidegrees Celsius. Temperature
+is provided within a range of -127 to +255 degrees (+127.875 degrees for
+the internal sensor). Resolution depends on temperature input and range.
+
+Each sensor has its own maximum limit, but the hysteresis is common to all
+channels. The hysteresis is configurable with the tem1_max_hyst attribute and
+affects the hysteresis on all channels. The first two external sensors also
+have a critical limit.
+
+The lm95234 driver can change its update interval to a fixed set of values.
+It will round up to the next selectable interval. See the datasheet for exact
+values. Reading sensor values more often will do no harm, but will return
+'old' values.
diff --git a/Documentation/hwmon/lm95245.rst b/Documentation/hwmon/lm95245.rst
new file mode 100644
index 000000000..836d9a3f5
--- /dev/null
+++ b/Documentation/hwmon/lm95245.rst
@@ -0,0 +1,48 @@
+Kernel driver lm95245
+=====================
+
+Supported chips:
+
+ * TI LM95235
+
+ Addresses scanned: I2C 0x18, 0x29, 0x4c
+
+ Datasheet: Publicly available at the TI website
+
+ https://www.ti.com/lit/ds/symlink/lm95235.pdf
+
+ * TI / National Semiconductor LM95245
+
+ Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d
+
+ Datasheet: Publicly available at the TI website
+
+ https://www.ti.com/lit/ds/symlink/lm95245.pdf
+
+Author: Alexander Stein <alexander.stein@systec-electronic.com>
+
+Description
+-----------
+
+LM95235 and LM95245 are 11-bit digital temperature sensors with a 2-wire System
+Management Bus (SMBus) interface and TruTherm technology that can monitor
+the temperature of a remote diode as well as its own temperature.
+The chips can be used to very accurately monitor the temperature of
+external devices such as microprocessors.
+
+All temperature values are given in millidegrees Celsius. Local temperature
+is given within a range of -127 to +127.875 degrees. Remote temperatures are
+given within a range of -127 to +255 degrees. Resolution depends on
+temperature input and range.
+
+Each sensor has its own critical limit. Additionally, there is a relative
+hysteresis value common to both critical limits. To make life easier to
+user-space applications, two absolute values are exported, one for each
+channel, but these values are of course linked. Only the local hysteresis
+can be set from user-space, and the same delta applies to the remote
+hysteresis.
+
+The lm95245 driver can change its update interval to a fixed set of values.
+It will round up to the next selectable interval. See the datasheet for exact
+values. Reading sensor values more often will do no harm, but will return
+'old' values.
diff --git a/Documentation/hwmon/lochnagar.rst b/Documentation/hwmon/lochnagar.rst
new file mode 100644
index 000000000..1d609c4d1
--- /dev/null
+++ b/Documentation/hwmon/lochnagar.rst
@@ -0,0 +1,83 @@
+Kernel Driver Lochnagar
+=======================
+
+Supported systems:
+ * Cirrus Logic : Lochnagar 2
+
+Author: Lucas A. Tanure Alves
+
+Description
+-----------
+
+Lochnagar 2 features built-in Current Monitor circuitry that allows for the
+measurement of both voltage and current on up to eight of the supply voltage
+rails provided to the minicards. The Current Monitor does not require any
+hardware modifications or external circuitry to operate.
+
+The current and voltage measurements are obtained through the standard register
+map interface to the Lochnagar board controller, and can therefore be monitored
+by software.
+
+Sysfs attributes
+----------------
+
+======================= =======================================================
+temp1_input The Lochnagar board temperature (milliCelsius)
+in0_input Measured voltage for DBVDD1 (milliVolts)
+in0_label "DBVDD1"
+curr1_input Measured current for DBVDD1 (milliAmps)
+curr1_label "DBVDD1"
+power1_average Measured average power for DBVDD1 (microWatts)
+power1_average_interval Power averaging time input valid from 1 to 1708mS
+power1_label "DBVDD1"
+in1_input Measured voltage for 1V8 DSP (milliVolts)
+in1_label "1V8 DSP"
+curr2_input Measured current for 1V8 DSP (milliAmps)
+curr2_label "1V8 DSP"
+power2_average Measured average power for 1V8 DSP (microWatts)
+power2_average_interval Power averaging time input valid from 1 to 1708mS
+power2_label "1V8 DSP"
+in2_input Measured voltage for 1V8 CDC (milliVolts)
+in2_label "1V8 CDC"
+curr3_input Measured current for 1V8 CDC (milliAmps)
+curr3_label "1V8 CDC"
+power3_average Measured average power for 1V8 CDC (microWatts)
+power3_average_interval Power averaging time input valid from 1 to 1708mS
+power3_label "1V8 CDC"
+in3_input Measured voltage for VDDCORE DSP (milliVolts)
+in3_label "VDDCORE DSP"
+curr4_input Measured current for VDDCORE DSP (milliAmps)
+curr4_label "VDDCORE DSP"
+power4_average Measured average power for VDDCORE DSP (microWatts)
+power4_average_interval Power averaging time input valid from 1 to 1708mS
+power4_label "VDDCORE DSP"
+in4_input Measured voltage for AVDD 1V8 (milliVolts)
+in4_label "AVDD 1V8"
+curr5_input Measured current for AVDD 1V8 (milliAmps)
+curr5_label "AVDD 1V8"
+power5_average Measured average power for AVDD 1V8 (microWatts)
+power5_average_interval Power averaging time input valid from 1 to 1708mS
+power5_label "AVDD 1V8"
+curr6_input Measured current for SYSVDD (milliAmps)
+curr6_label "SYSVDD"
+power6_average Measured average power for SYSVDD (microWatts)
+power6_average_interval Power averaging time input valid from 1 to 1708mS
+power6_label "SYSVDD"
+in6_input Measured voltage for VDDCORE CDC (milliVolts)
+in6_label "VDDCORE CDC"
+curr7_input Measured current for VDDCORE CDC (milliAmps)
+curr7_label "VDDCORE CDC"
+power7_average Measured average power for VDDCORE CDC (microWatts)
+power7_average_interval Power averaging time input valid from 1 to 1708mS
+power7_label "VDDCORE CDC"
+in7_input Measured voltage for MICVDD (milliVolts)
+in7_label "MICVDD"
+curr8_input Measured current for MICVDD (milliAmps)
+curr8_label "MICVDD"
+power8_average Measured average power for MICVDD (microWatts)
+power8_average_interval Power averaging time input valid from 1 to 1708mS
+power8_label "MICVDD"
+======================= =======================================================
+
+Note:
+ It is not possible to measure voltage on the SYSVDD rail.
diff --git a/Documentation/hwmon/lt7182s.rst b/Documentation/hwmon/lt7182s.rst
new file mode 100644
index 000000000..f7268311b
--- /dev/null
+++ b/Documentation/hwmon/lt7182s.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver lt7182s
+=====================
+
+Supported chips:
+
+ * ADI LT7182S
+
+ Prefix: 'lt7182s'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/lt7182s.html
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+LT7182S is a Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher with
+Digital Power System Management support.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for a LT7182S
+at address 0x4f on I2C bus #4::
+
+ # modprobe lt7182s
+ # echo lt7182s 0x4f > /sys/bus/i2c/devices/i2c-4/new_device
+
+It can also be instantiated by declaring an entry in device tree.
+
+
+Sysfs attributes
+----------------
+
+======================= ====================================
+curr[1-2]_label "iin[12]"
+curr[1-2]_input Measured input current
+curr[1-2]_max Maximum input current
+curr[1-2]_max_alarm Current high alarm
+
+curr[3-4]_label "iout[1-2]"
+curr[3-4]_input Measured output current
+curr[3-4]_highest Highest measured output current
+curr[3-4]_max Maximum output current
+curr[3-4]_max_alarm Output current high alarm
+
+in[1-2]_label "vin[12]"
+in[1-2]_input Measured input voltage
+in[1-2]_highest Highest measured input voltage
+in[1-2]_crit Critical maximum input voltage
+in[1-2]_crit_alarm Input voltage critical high alarm
+in[1-2]_min Minimum input voltage
+in[1-2]_min_alarm Input voltage low alarm
+in[1-2]_rated_min Rated minimum input voltage
+in[1-2]_rated_max Rated maximum input voltage
+in1_reset_history Write to reset history for all attributes
+
+in[3-5]_label "vmon[1-3]"
+in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins
+ Only available if enabled with MFR_ADC_CONTROL_LT7182S
+ command.
+
+in[3-4|6-7]_label "vout[1-2]"
+in[3-4|6-7]_input Measured output voltage
+in[3-4|6-7]_highest Highest measured output voltage
+in[3-4|6-7]_lcrit Critical minimum output voltage
+in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
+in[3-4|6-7]_min Minimum output voltage
+in[3-4|6-7]_max_alarm Output voltage low alarm
+in[3-4|6-7]_max Maximum output voltage
+in[3-4|6-7]_max_alarm Output voltage high alarm
+in[3-4|6-7]_crit Critical maximum output voltage
+in[3-4|6-7]_crit_alarm Output voltage critical high alarm
+
+power[1-2]_label "pout[1-2]"
+power[1-2]_input Measured output power
+
+temp1_input Measured temperature
+temp1_crit Critical high temperature
+temp1_crit_alarm Chip temperature critical high alarm
+temp1_max Maximum temperature
+temp1_max_alarm Chip temperature high alarm
+======================= ====================================
diff --git a/Documentation/hwmon/ltc2945.rst b/Documentation/hwmon/ltc2945.rst
new file mode 100644
index 000000000..8d65c141c
--- /dev/null
+++ b/Documentation/hwmon/ltc2945.rst
@@ -0,0 +1,92 @@
+Kernel driver ltc2945
+=====================
+
+Supported chips:
+
+ * Linear Technology LTC2945
+
+ Prefix: 'ltc2945'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/2945fb.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+The LTC2945 is a rail-to-rail system monitor that measures current, voltage,
+and power consumption.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC2945 devices, since there is no register
+which can be safely used to identify the chip. You will have to instantiate
+the devices explicitly.
+
+Example: the following will load the driver for an LTC2945 at address 0x10
+on I2C bus #1::
+
+ $ modprobe ltc2945
+ $ echo ltc2945 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+Voltage readings provided by this driver are reported as obtained from the ADC
+registers. If a set of voltage divider resistors is installed, calculate the
+real voltage by multiplying the reported value with (R1+R2)/R2, where R1 is the
+value of the divider resistor against the measured voltage and R2 is the value
+of the divider resistor against Ground.
+
+Current reading provided by this driver is reported as obtained from the ADC
+Current Sense register. The reported value assumes that a 1 mOhm sense resistor
+is installed. If a different sense resistor is installed, calculate the real
+current by dividing the reported value by the sense resistor value in mOhm.
+
+======================= ========================================================
+in1_input VIN voltage (mV). Voltage is measured either at
+ SENSE+ or VDD pin depending on chip configuration.
+in1_min Undervoltage threshold
+in1_max Overvoltage threshold
+in1_lowest Lowest measured voltage
+in1_highest Highest measured voltage
+in1_reset_history Write 1 to reset in1 history
+in1_min_alarm Undervoltage alarm
+in1_max_alarm Overvoltage alarm
+
+in2_input ADIN voltage (mV)
+in2_min Undervoltage threshold
+in2_max Overvoltage threshold
+in2_lowest Lowest measured voltage
+in2_highest Highest measured voltage
+in2_reset_history Write 1 to reset in2 history
+in2_min_alarm Undervoltage alarm
+in2_max_alarm Overvoltage alarm
+
+curr1_input SENSE current (mA)
+curr1_min Undercurrent threshold
+curr1_max Overcurrent threshold
+curr1_lowest Lowest measured current
+curr1_highest Highest measured current
+curr1_reset_history Write 1 to reset curr1 history
+curr1_min_alarm Undercurrent alarm
+curr1_max_alarm Overcurrent alarm
+
+power1_input Power (in uW). Power is calculated based on SENSE+/VDD
+ voltage or ADIN voltage depending on chip configuration.
+power1_min Low lower threshold
+power1_max High power threshold
+power1_input_lowest Historical minimum power use
+power1_input_highest Historical maximum power use
+power1_reset_history Write 1 to reset power1 history
+power1_min_alarm Low power alarm
+power1_max_alarm High power alarm
+======================= ========================================================
diff --git a/Documentation/hwmon/ltc2947.rst b/Documentation/hwmon/ltc2947.rst
new file mode 100644
index 000000000..419fc84fe
--- /dev/null
+++ b/Documentation/hwmon/ltc2947.rst
@@ -0,0 +1,100 @@
+Kernel drivers ltc2947-i2c and ltc2947-spi
+==========================================
+
+Supported chips:
+
+ * Analog Devices LTC2947
+
+ Prefix: 'ltc2947'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf
+
+Author: Nuno Sá <nuno.sa@analog.com>
+
+Description
+___________
+
+The LTC2947 is a high precision power and energy monitor that measures current,
+voltage, power, temperature, charge and energy. The device supports both SPI
+and I2C depending on the chip configuration.
+The device also measures accumulated quantities as energy. It has two banks of
+register's to read/set energy related values. These banks can be configured
+independently to have setups like: energy1 accumulates always and enrgy2 only
+accumulates if current is positive (to check battery charging efficiency for
+example). The device also supports a GPIO pin that can be configured as output
+to control a fan as a function of measured temperature. Then, the GPIO becomes
+active as soon as a temperature reading is higher than a defined threshold. The
+temp2 channel is used to control this thresholds and to read the respective
+alarms.
+
+Sysfs entries
+_____________
+
+The following attributes are supported. Limits are read-write, reset_history
+is write-only and all the other attributes are read-only.
+
+======================= ==========================================
+in0_input VP-VM voltage (mV).
+in0_min Undervoltage threshold
+in0_max Overvoltage threshold
+in0_lowest Lowest measured voltage
+in0_highest Highest measured voltage
+in0_reset_history Write 1 to reset in1 history
+in0_min_alarm Undervoltage alarm
+in0_max_alarm Overvoltage alarm
+in0_label Channel label (VP-VM)
+
+in1_input DVCC voltage (mV)
+in1_min Undervoltage threshold
+in1_max Overvoltage threshold
+in1_lowest Lowest measured voltage
+in1_highest Highest measured voltage
+in1_reset_history Write 1 to reset in2 history
+in1_min_alarm Undervoltage alarm
+in1_max_alarm Overvoltage alarm
+in1_label Channel label (DVCC)
+
+curr1_input IP-IM Sense current (mA)
+curr1_min Undercurrent threshold
+curr1_max Overcurrent threshold
+curr1_lowest Lowest measured current
+curr1_highest Highest measured current
+curr1_reset_history Write 1 to reset curr1 history
+curr1_min_alarm Undercurrent alarm
+curr1_max_alarm Overcurrent alarm
+curr1_label Channel label (IP-IM)
+
+power1_input Power (in uW)
+power1_min Low power threshold
+power1_max High power threshold
+power1_input_lowest Historical minimum power use
+power1_input_highest Historical maximum power use
+power1_reset_history Write 1 to reset power1 history
+power1_min_alarm Low power alarm
+power1_max_alarm High power alarm
+power1_label Channel label (Power)
+
+temp1_input Chip Temperature (in milliC)
+temp1_min Low temperature threshold
+temp1_max High temperature threshold
+temp1_input_lowest Historical minimum temperature use
+temp1_input_highest Historical maximum temperature use
+temp1_reset_history Write 1 to reset temp1 history
+temp1_min_alarm Low temperature alarm
+temp1_max_alarm High temperature alarm
+temp1_label Channel label (Ambient)
+
+temp2_min Low temperature threshold for fan control
+temp2_max High temperature threshold for fan control
+temp2_min_alarm Low temperature fan control alarm
+temp2_max_alarm High temperature fan control alarm
+temp2_label Channel label (TEMPFAN)
+
+energy1_input Measured energy over time (in microJoule)
+
+energy2_input Measured energy over time (in microJoule)
+======================= ==========================================
diff --git a/Documentation/hwmon/ltc2978.rst b/Documentation/hwmon/ltc2978.rst
new file mode 100644
index 000000000..b99a63965
--- /dev/null
+++ b/Documentation/hwmon/ltc2978.rst
@@ -0,0 +1,449 @@
+Kernel driver ltc2978
+=====================
+
+Supported chips:
+
+ * Linear Technology LTC2972
+
+ Prefix: 'ltc2972'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc2972.html
+
+ * Linear Technology LTC2974
+
+ Prefix: 'ltc2974'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc2974
+
+ * Linear Technology LTC2975
+
+ Prefix: 'ltc2975'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc2975
+
+ * Linear Technology LTC2977
+
+ Prefix: 'ltc2977'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc2977
+
+ * Linear Technology LTC2978, LTC2978A
+
+ Prefix: 'ltc2978'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc2978
+
+ https://www.analog.com/en/products/ltc2978a
+
+ * Linear Technology LTC2979
+
+ Prefix: 'ltc2979'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc2979
+
+ * Linear Technology LTC2980
+
+ Prefix: 'ltc2980'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc2980
+
+ * Linear Technology LTC3880
+
+ Prefix: 'ltc3880'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc3880
+
+ * Linear Technology LTC3882
+
+ Prefix: 'ltc3882'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc3882
+
+ * Linear Technology LTC3883
+
+ Prefix: 'ltc3883'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc3883
+
+ * Linear Technology LTC3884
+
+ Prefix: 'ltc3884'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc3884
+
+ * Linear Technology LTC3886
+
+ Prefix: 'ltc3886'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc3886
+
+ * Linear Technology LTC3887
+
+ Prefix: 'ltc3887'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc3887
+
+ * Linear Technology LTC3889
+
+ Prefix: 'ltc3889'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc3889
+
+ * Linear Technology LTC7880
+
+ Prefix: 'ltc7880'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltc7880
+
+ * Linear Technology LTM2987
+
+ Prefix: 'ltm2987'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltm2987
+
+ * Linear Technology LTM4644
+
+ Prefix: 'ltm4644'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltm4644
+
+ * Linear Technology LTM4675
+
+ Prefix: 'ltm4675'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltm4675
+
+ * Linear Technology LTM4676
+
+ Prefix: 'ltm4676'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltm4676
+
+ * Linear Technology LTM4677
+
+ Prefix: 'ltm4677'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltm4677
+
+ * Linear Technology LTM4678
+
+ Prefix: 'ltm4678'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/en/products/ltm4678
+
+ * Analog Devices LTM4680
+
+ Prefix: 'ltm4680'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/ltm4680
+
+ * Analog Devices LTM4686
+
+ Prefix: 'ltm4686'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/ltm4686
+
+ * Analog Devices LTM4700
+
+ Prefix: 'ltm4700'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.analog.com/ltm4700
+
+
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+- LTC2974 and LTC2975 are quad digital power supply managers.
+- LTC2978 is an octal power supply monitor.
+- LTC2977 is a pin compatible replacement for LTC2978.
+- LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977
+- in a single die. The chip is instantiated and reported as two separate chips
+- on two different I2C bus addresses.
+- LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down
+- DC/DC controllers.
+- LTC3883 is a single phase step-down DC/DC controller.
+- LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
+- additional components on a single die. The chip is instantiated and reported
+- as two separate chips on two different I2C bus addresses.
+- LTM4675 is a dual 9A or single 18A μModule regulator
+- LTM4676 is a dual 13A or single 26A uModule regulator.
+- LTM4686 is a dual 10A or single 20A uModule regulator.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for an LTC2978 at address
+0x60 on I2C bus #1::
+
+ # modprobe ltc2978
+ # echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs attributes
+----------------
+
+======================= ========================================================
+in1_label "vin"
+
+in1_input Measured input voltage.
+
+in1_min Minimum input voltage.
+
+in1_max Maximum input voltage.
+
+ LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+ LTC2979 and LTM2987 only.
+
+in1_lcrit Critical minimum input voltage.
+
+ LTC2972, LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+ LTC2979 and LTM2987 only.
+
+in1_crit Critical maximum input voltage.
+
+in1_min_alarm Input voltage low alarm.
+
+in1_max_alarm Input voltage high alarm.
+
+ LTC2972, LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+ LTC2979 and LTM2987 only.
+
+in1_lcrit_alarm Input voltage critical low alarm.
+
+ LTC2972, LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+ LTC2979 and LTM2987 only.
+
+in1_crit_alarm Input voltage critical high alarm.
+
+in1_lowest Lowest input voltage.
+
+ LTC2972, LTC2974, LTC2975, LTC2977, LTC2980, LTC2978,
+ and LTM2987 only.
+
+in1_highest Highest input voltage.
+
+in1_reset_history Reset input voltage history.
+
+in[N]_label "vout[1-8]".
+
+ - LTC2972: N=2-3
+ - LTC2974, LTC2975: N=2-5
+ - LTC2977, LTC2979, LTC2980, LTM2987: N=2-9
+ - LTC2978: N=2-9
+ - LTC3880, LTC3882, LTC3884, LTC23886 LTC3887, LTC3889,
+ LTC7880, LTM4644, LTM4675, LTM4676, LTM4677, LTM4678,
+ LTM4680, LTM4700: N=2-3
+ - LTC3883: N=2
+
+in[N]_input Measured output voltage.
+
+in[N]_min Minimum output voltage.
+
+in[N]_max Maximum output voltage.
+
+in[N]_lcrit Critical minimum output voltage.
+
+in[N]_crit Critical maximum output voltage.
+
+in[N]_min_alarm Output voltage low alarm.
+
+in[N]_max_alarm Output voltage high alarm.
+
+in[N]_lcrit_alarm Output voltage critical low alarm.
+
+in[N]_crit_alarm Output voltage critical high alarm.
+
+in[N]_lowest Lowest output voltage.
+
+ LTC2972, LTC2974, LTC2975,and LTC2978 only.
+
+in[N]_highest Highest output voltage.
+
+in[N]_reset_history Reset output voltage history.
+
+temp[N]_input Measured temperature.
+
+ - On LTC2972, temp[1-2] report external temperatures,
+ and temp 3 reports the chip temperature.
+ - On LTC2974 and LTC2975, temp[1-4] report external
+ temperatures, and temp5 reports the chip temperature.
+ - On LTC2977, LTC2979, LTC2980, LTC2978, and LTM2987,
+ only one temperature measurement is supported and
+ reports the chip temperature.
+ - On LTC3880, LTC3882, LTC3886, LTC3887, LTC3889,
+ LTM4664, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680,
+ and LTM4700, temp1 and temp2 report external
+ temperatures, and temp3 reports the chip temperature.
+ - On LTC3883, temp1 reports an external temperature,
+ and temp2 reports the chip temperature.
+
+temp[N]_min Mimimum temperature.
+
+ LTC2972, LTC2974, LCT2977, LTM2980, LTC2978,
+ LTC2979, and LTM2987 only.
+
+temp[N]_max Maximum temperature.
+
+temp[N]_lcrit Critical low temperature.
+
+temp[N]_crit Critical high temperature.
+
+temp[N]_min_alarm Temperature low alarm.
+
+ LTC2972, LTC2974, LTC2975, LTC2977, LTM2980, LTC2978,
+ LTC2979, and LTM2987 only.
+
+temp[N]_max_alarm Temperature high alarm.
+
+
+temp[N]_lcrit_alarm Temperature critical low alarm.
+
+temp[N]_crit_alarm Temperature critical high alarm.
+
+temp[N]_lowest Lowest measured temperature.
+
+ - LTC2972, LTC2974, LTC2975, LTC2977, LTM2980, LTC2978,
+ LTC2979, and LTM2987 only.
+ - Not supported for chip temperature sensor on LTC2974
+ and LTC2975.
+
+temp[N]_highest Highest measured temperature.
+
+ Not supported for chip temperature sensor on
+ LTC2974 and LTC2975.
+
+temp[N]_reset_history Reset temperature history.
+
+ Not supported for chip temperature sensor on
+ LTC2974 and LTC2975.
+
+power1_label "pin". LTC3883 and LTC3886 only.
+
+power1_input Measured input power.
+
+power[N]_label "pout[1-4]".
+
+ - LTC2972: N=1-2
+ - LTC2974, LTC2975: N=1-4
+ - LTC2977, LTC2979, LTC2980, LTM2987: Not supported
+ - LTC2978: Not supported
+ - LTC3880, LTC3882, LTC3884, LTC3886, LTC3887, LTC3889,
+ LTM4664, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680,
+ LTM4700: N=1-2
+ - LTC3883: N=2
+
+power[N]_input Measured output power.
+
+curr1_label "iin".
+
+ LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889,
+ LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680,
+ and LTM4700 only.
+
+curr1_input Measured input current.
+
+curr1_max Maximum input current.
+
+curr1_max_alarm Input current high alarm.
+
+curr1_highest Highest input current.
+
+ LTC3883 and LTC3886 only.
+
+curr1_reset_history Reset input current history.
+
+ LTC3883 and LTC3886 only.
+
+curr[N]_label "iout[1-4]".
+
+ - LTC2972: N-1-2
+ - LTC2974, LTC2975: N=1-4
+ - LTC2977, LTC2979, LTC2980, LTM2987: not supported
+ - LTC2978: not supported
+ - LTC3880, LTC3882, LTC3884, LTC3886, LTC3887, LTC3889,
+ LTM4664, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680,
+ LTM4700: N=2-3
+ - LTC3883: N=2
+
+curr[N]_input Measured output current.
+
+curr[N]_max Maximum output current.
+
+curr[N]_crit Critical high output current.
+
+curr[N]_lcrit Critical low output current.
+
+ LTC2972, LTC2974 and LTC2975 only.
+
+curr[N]_max_alarm Output current high alarm.
+
+curr[N]_crit_alarm Output current critical high alarm.
+
+curr[N]_lcrit_alarm Output current critical low alarm.
+
+ LTC2972, LTC2974 and LTC2975 only.
+
+curr[N]_lowest Lowest output current.
+
+ LTC2972, LTC2974 and LTC2975 only.
+
+curr[N]_highest Highest output current.
+
+curr[N]_reset_history Reset output current history.
+======================= ========================================================
diff --git a/Documentation/hwmon/ltc2990.rst b/Documentation/hwmon/ltc2990.rst
new file mode 100644
index 000000000..e0a369e67
--- /dev/null
+++ b/Documentation/hwmon/ltc2990.rst
@@ -0,0 +1,62 @@
+Kernel driver ltc2990
+=====================
+
+
+Supported chips:
+
+ * Linear Technology LTC2990
+
+ Prefix: 'ltc2990'
+
+ Addresses scanned: -
+
+ Datasheet: http://www.linear.com/product/ltc2990
+
+
+
+Author:
+
+ - Mike Looijmans <mike.looijmans@topic.nl>
+ - Tom Levens <tom.levens@cern.ch>
+
+
+Description
+-----------
+
+LTC2990 is a Quad I2C Voltage, Current and Temperature Monitor.
+The chip's inputs can measure 4 voltages, or two inputs together (1+2 and 3+4)
+can be combined to measure a differential voltage, which is typically used to
+measure current through a series resistor, or a temperature with an external
+diode.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+
+Sysfs attributes
+----------------
+
+============= ==================================================
+in0_input Voltage at Vcc pin in millivolt (range 2.5V to 5V)
+temp1_input Internal chip temperature in millidegrees Celsius
+============= ==================================================
+
+A subset of the following attributes are visible, depending on the measurement
+mode of the chip.
+
+============= ==========================================================
+in[1-4]_input Voltage at V[1-4] pin in millivolt
+temp2_input External temperature sensor TR1 in millidegrees Celsius
+temp3_input External temperature sensor TR2 in millidegrees Celsius
+curr1_input Current in mA across V1-V2 assuming a 1mOhm sense resistor
+curr2_input Current in mA across V3-V4 assuming a 1mOhm sense resistor
+============= ==========================================================
+
+The "curr*_input" measurements actually report the voltage drop across the
+input pins in microvolts. This is equivalent to the current through a 1mOhm
+sense resistor. Divide the reported value by the actual sense resistor value
+in mOhm to get the actual value.
diff --git a/Documentation/hwmon/ltc2992.rst b/Documentation/hwmon/ltc2992.rst
new file mode 100644
index 000000000..a0bcd867a
--- /dev/null
+++ b/Documentation/hwmon/ltc2992.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver ltc2992
+=====================
+
+Supported chips:
+ * Linear Technology LTC2992
+ Prefix: 'ltc2992'
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2992.pdf
+
+Author: Alexandru Tachici <alexandru.tachici@analog.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Linear Technology LTC2992 power monitor.
+
+LTC2992 is a rail-to-rail system monitor that measures current,
+voltage, and power of two supplies.
+
+Two ADCs simultaneously measure each supply's current. A third ADC monitors
+the input voltages and four auxiliary external voltages.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write,
+all other attributes are read-only.
+
+in_reset_history Reset all highest/lowest values.
+
+inX_input Measured voltage.
+inX_lowest Minimum measured voltage.
+inX_highest Maximum measured voltage.
+inX_min Minimum voltage allowed.
+inX_max Maximum voltage allowed.
+inX_min_alarm An undervoltage occurred. Cleared on read.
+inX_max_alarm An overvoltage occurred. Cleared on read.
+
+currX_input Measured current.
+currX_lowest Minimum measured current.
+currX_highest Maximum measured current.
+currX_min Minimum current allowed.
+currX_max Maximum current allowed.
+currX_min_alarm An undercurrent occurred. Cleared on read.
+currX_max_alarm An overcurrent occurred. Cleared on read.
+
+powerX_input Measured power.
+powerX_input_lowest Minimum measured voltage.
+powerX_input_highest Maximum measured voltage.
+powerX_min Minimum power.
+powerX_max Maximum power.
+powerX_min_alarm An underpower occurred. Cleared on read.
+powerX_max_alarm An overpower occurred. Cleared on read.
diff --git a/Documentation/hwmon/ltc3815.rst b/Documentation/hwmon/ltc3815.rst
new file mode 100644
index 000000000..fb0135fc1
--- /dev/null
+++ b/Documentation/hwmon/ltc3815.rst
@@ -0,0 +1,67 @@
+Kernel driver ltc3815
+=====================
+
+Supported chips:
+
+ * Linear Technology LTC3815
+
+ Prefix: 'ltc3815'
+
+ Addresses scanned: -
+
+ Datasheet: http://www.linear.com/product/ltc3815
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+LTC3815 is a Monolithic Synchronous DC/DC Step-Down Converter.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for an LTC3815
+at address 0x20 on I2C bus #1::
+
+ # modprobe ltc3815
+ # echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs attributes
+----------------
+
+======================= =======================================================
+in1_label "vin"
+in1_input Measured input voltage.
+in1_alarm Input voltage alarm.
+in1_highest Highest input voltage.
+in1_reset_history Reset input voltage history.
+
+in2_label "vout1".
+in2_input Measured output voltage.
+in2_alarm Output voltage alarm.
+in2_highest Highest output voltage.
+in2_reset_history Reset output voltage history.
+
+temp1_input Measured chip temperature.
+temp1_alarm Temperature alarm.
+temp1_highest Highest measured temperature.
+temp1_reset_history Reset temperature history.
+
+curr1_label "iin".
+curr1_input Measured input current.
+curr1_highest Highest input current.
+curr1_reset_history Reset input current history.
+
+curr2_label "iout1".
+curr2_input Measured output current.
+curr2_alarm Output current alarm.
+curr2_highest Highest output current.
+curr2_reset_history Reset output current history.
+======================= =======================================================
diff --git a/Documentation/hwmon/ltc4151.rst b/Documentation/hwmon/ltc4151.rst
new file mode 100644
index 000000000..c39229b19
--- /dev/null
+++ b/Documentation/hwmon/ltc4151.rst
@@ -0,0 +1,55 @@
+Kernel driver ltc4151
+=====================
+
+Supported chips:
+
+ * Linear Technology LTC4151
+
+ Prefix: 'ltc4151'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://www.linear.com/docs/Datasheet/4151fc.pdf
+
+Author: Per Dalen <per.dalen@appeartv.com>
+
+
+Description
+-----------
+
+The LTC4151 is a High Voltage I2C Current and Voltage Monitor.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC4151 devices, since there is no register
+which can be safely used to identify the chip. You will have to instantiate
+the devices explicitly.
+
+Example: the following will load the driver for an LTC4151 at address 0x6f
+on I2C bus #0::
+
+ # modprobe ltc4151
+ # echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device
+
+
+Sysfs entries
+-------------
+
+Voltage readings provided by this driver are reported as obtained from the ADIN
+and VIN registers.
+
+Current reading provided by this driver is reported as obtained from the Current
+Sense register. The reported value assumes that a 1 mOhm sense resistor is
+installed.
+
+======================= ==================
+in1_input VDIN voltage (mV)
+
+in2_input ADIN voltage (mV)
+
+curr1_input SENSE current (mA)
+======================= ==================
diff --git a/Documentation/hwmon/ltc4215.rst b/Documentation/hwmon/ltc4215.rst
new file mode 100644
index 000000000..8d5044d99
--- /dev/null
+++ b/Documentation/hwmon/ltc4215.rst
@@ -0,0 +1,59 @@
+Kernel driver ltc4215
+=====================
+
+Supported chips:
+
+ * Linear Technology LTC4215
+
+ Prefix: 'ltc4215'
+
+ Addresses scanned: 0x44
+
+ Datasheet:
+
+ http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697
+
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+
+
+Description
+-----------
+
+The LTC4215 controller allows a board to be safely inserted and removed
+from a live backplane.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC4215 devices, due to the fact that some
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
+
+Example: the following will load the driver for an LTC4215 at address 0x44
+on I2C bus #0::
+
+ $ modprobe ltc4215
+ $ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
+
+
+Sysfs entries
+-------------
+
+The LTC4215 has built-in limits for overvoltage, undervoltage, and
+undercurrent warnings. This makes it very likely that the reference
+circuit will be used.
+
+======================= =========================
+in1_input input voltage
+in2_input output voltage
+
+in1_min_alarm input undervoltage alarm
+in1_max_alarm input overvoltage alarm
+
+curr1_input current
+curr1_max_alarm overcurrent alarm
+
+power1_input power usage
+power1_alarm power bad alarm
+======================= =========================
diff --git a/Documentation/hwmon/ltc4245.rst b/Documentation/hwmon/ltc4245.rst
new file mode 100644
index 000000000..3dafd08a4
--- /dev/null
+++ b/Documentation/hwmon/ltc4245.rst
@@ -0,0 +1,111 @@
+Kernel driver ltc4245
+=====================
+
+Supported chips:
+
+ * Linear Technology LTC4245
+
+ Prefix: 'ltc4245'
+
+ Addresses scanned: 0x20-0x3f
+
+ Datasheet:
+
+ http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1140,P19392,D13517
+
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+
+
+Description
+-----------
+
+The LTC4245 controller allows a board to be safely inserted and removed
+from a live backplane in multiple supply systems such as CompactPCI and
+PCI Express.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC4245 devices, due to the fact that some
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
+
+Example: the following will load the driver for an LTC4245 at address 0x23
+on I2C bus #1::
+
+ $ modprobe ltc4245
+ $ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+The LTC4245 has built-in limits for over and under current warnings. This
+makes it very likely that the reference circuit will be used.
+
+This driver uses the values in the datasheet to change the register values
+into the values specified in the sysfs-interface document. The current readings
+rely on the sense resistors listed in Table 2: "Sense Resistor Values".
+
+======================= =======================================================
+in1_input 12v input voltage (mV)
+in2_input 5v input voltage (mV)
+in3_input 3v input voltage (mV)
+in4_input Vee (-12v) input voltage (mV)
+
+in1_min_alarm 12v input undervoltage alarm
+in2_min_alarm 5v input undervoltage alarm
+in3_min_alarm 3v input undervoltage alarm
+in4_min_alarm Vee (-12v) input undervoltage alarm
+
+curr1_input 12v current (mA)
+curr2_input 5v current (mA)
+curr3_input 3v current (mA)
+curr4_input Vee (-12v) current (mA)
+
+curr1_max_alarm 12v overcurrent alarm
+curr2_max_alarm 5v overcurrent alarm
+curr3_max_alarm 3v overcurrent alarm
+curr4_max_alarm Vee (-12v) overcurrent alarm
+
+in5_input 12v output voltage (mV)
+in6_input 5v output voltage (mV)
+in7_input 3v output voltage (mV)
+in8_input Vee (-12v) output voltage (mV)
+
+in5_min_alarm 12v output undervoltage alarm
+in6_min_alarm 5v output undervoltage alarm
+in7_min_alarm 3v output undervoltage alarm
+in8_min_alarm Vee (-12v) output undervoltage alarm
+
+in9_input GPIO voltage data (see note 1)
+in10_input GPIO voltage data (see note 1)
+in11_input GPIO voltage data (see note 1)
+
+power1_input 12v power usage (mW)
+power2_input 5v power usage (mW)
+power3_input 3v power usage (mW)
+power4_input Vee (-12v) power usage (mW)
+======================= =======================================================
+
+
+Note 1
+------
+
+If you have NOT configured the driver to sample all GPIO pins as analog
+voltages, then the in10_input and in11_input sysfs attributes will not be
+created. The driver will sample the GPIO pin that is currently connected to the
+ADC as an analog voltage, and report the value in in9_input.
+
+If you have configured the driver to sample all GPIO pins as analog voltages,
+then they will be sampled in round-robin fashion. If userspace reads too
+slowly, -EAGAIN will be returned when you read the sysfs attribute containing
+the sensor reading.
+
+The LTC4245 chip can be configured to sample all GPIO pins with two methods:
+
+1) platform data -- see include/linux/platform_data/ltc4245.h
+2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip
+
+The default mode of operation is to sample a single GPIO pin.
diff --git a/Documentation/hwmon/ltc4260.rst b/Documentation/hwmon/ltc4260.rst
new file mode 100644
index 000000000..4c335b6a5
--- /dev/null
+++ b/Documentation/hwmon/ltc4260.rst
@@ -0,0 +1,64 @@
+Kernel driver ltc4260
+=====================
+
+Supported chips:
+
+ * Linear Technology LTC4260
+
+ Prefix: 'ltc4260'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://cds.linear.com/docs/en/datasheet/4260fc.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+The LTC4260 Hot Swap controller allows a board to be safely inserted
+and removed from a live backplane.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC4260 devices, since there is no register
+which can be safely used to identify the chip. You will have to instantiate
+the devices explicitly.
+
+Example: the following will load the driver for an LTC4260 at address 0x10
+on I2C bus #1::
+
+ $ modprobe ltc4260
+ $ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+Voltage readings provided by this driver are reported as obtained from the ADC
+registers. If a set of voltage divider resistors is installed, calculate the
+real voltage by multiplying the reported value with (R1+R2)/R2, where R1 is the
+value of the divider resistor against the measured voltage and R2 is the value
+of the divider resistor against Ground.
+
+Current reading provided by this driver is reported as obtained from the ADC
+Current Sense register. The reported value assumes that a 1 mOhm sense resistor
+is installed. If a different sense resistor is installed, calculate the real
+current by dividing the reported value by the sense resistor value in mOhm.
+
+======================= =======================
+in1_input SOURCE voltage (mV)
+in1_min_alarm Undervoltage alarm
+in1_max_alarm Overvoltage alarm
+
+in2_input ADIN voltage (mV)
+in2_alarm Power bad alarm
+
+curr1_input SENSE current (mA)
+curr1_alarm SENSE overcurrent alarm
+======================= =======================
diff --git a/Documentation/hwmon/ltc4261.rst b/Documentation/hwmon/ltc4261.rst
new file mode 100644
index 000000000..c80233f80
--- /dev/null
+++ b/Documentation/hwmon/ltc4261.rst
@@ -0,0 +1,71 @@
+Kernel driver ltc4261
+=====================
+
+Supported chips:
+
+ * Linear Technology LTC4261
+
+ Prefix: 'ltc4261'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://cds.linear.com/docs/Datasheet/42612fb.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+The LTC4261/LTC4261-2 negative voltage Hot Swap controllers allow a board
+to be safely inserted and removed from a live backplane.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC4261 devices, since there is no register
+which can be safely used to identify the chip. You will have to instantiate
+the devices explicitly.
+
+Example: the following will load the driver for an LTC4261 at address 0x10
+on I2C bus #1::
+
+ $ modprobe ltc4261
+ $ echo ltc4261 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+Voltage readings provided by this driver are reported as obtained from the ADC
+registers. If a set of voltage divider resistors is installed, calculate the
+real voltage by multiplying the reported value with (R1+R2)/R2, where R1 is the
+value of the divider resistor against the measured voltage and R2 is the value
+of the divider resistor against Ground.
+
+Current reading provided by this driver is reported as obtained from the ADC
+Current Sense register. The reported value assumes that a 1 mOhm sense resistor
+is installed. If a different sense resistor is installed, calculate the real
+current by dividing the reported value by the sense resistor value in mOhm.
+
+The chip has two voltage sensors, but only one set of voltage alarm status bits.
+In many many designs, those alarms are associated with the ADIN2 sensor, due to
+the proximity of the ADIN2 pin to the OV pin. ADIN2 is, however, not available
+on all chip variants. To ensure that the alarm condition is reported to the user,
+report it with both voltage sensors.
+
+======================= =============================
+in1_input ADIN2 voltage (mV)
+in1_min_alarm ADIN/ADIN2 Undervoltage alarm
+in1_max_alarm ADIN/ADIN2 Overvoltage alarm
+
+in2_input ADIN voltage (mV)
+in2_min_alarm ADIN/ADIN2 Undervoltage alarm
+in2_max_alarm ADIN/ADIN2 Overvoltage alarm
+
+curr1_input SENSE current (mA)
+curr1_alarm SENSE overcurrent alarm
+======================= =============================
diff --git a/Documentation/hwmon/max127.rst b/Documentation/hwmon/max127.rst
new file mode 100644
index 000000000..dc192dd9c
--- /dev/null
+++ b/Documentation/hwmon/max127.rst
@@ -0,0 +1,45 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver max127
+====================
+
+Author:
+
+ * Tao Ren <rentao.bupt@gmail.com>
+
+Supported chips:
+
+ * Maxim MAX127
+
+ Prefix: 'max127'
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX127-MAX128.pdf
+
+Description
+-----------
+
+The MAX127 is a multirange, 12-bit data acquisition system (DAS) providing
+8 analog input channels that are independently software programmable for
+a variety of ranges. The available ranges are {0,5V}, {0,10V}, {-5,5V}
+and {-10,10V}.
+
+The MAX127 features a 2-wire, I2C-compatible serial interface that allows
+communication among multiple devices using SDA and SCL lines.
+
+Sysfs interface
+---------------
+
+ ============== ==============================================================
+ in[0-7]_input The input voltage (in mV) of the corresponding channel.
+ RO
+
+ in[0-7]_min The lower input limit (in mV) for the corresponding channel.
+ ADC range and LSB will be updated when the limit is changed.
+ For the MAX127, it will be adjusted to -10000, -5000, or 0.
+ RW
+
+ in[0-7]_max The higher input limit (in mV) for the corresponding channel.
+ ADC range and LSB will be updated when the limit is changed.
+ For the MAX127, it will be adjusted to 0, 5000, or 10000.
+ RW
+ ============== ==============================================================
diff --git a/Documentation/hwmon/max15301.rst b/Documentation/hwmon/max15301.rst
new file mode 100644
index 000000000..e3dc22fe1
--- /dev/null
+++ b/Documentation/hwmon/max15301.rst
@@ -0,0 +1,87 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver max15301
+======================
+
+Supported chips:
+
+ * Maxim MAX15301
+
+ Prefix: 'max15301', 'bmr461'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX15301.pdf
+
+Author: Erik Rosen <erik.rosen@metormote.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Maxim MAX15301 controller chip and
+compatible modules.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Module parameters
+-----------------
+
+delay
+-----
+
+The controller requires a minimum interval between I2C bus accesses.
+The default interval is set to 100 us. For manual override, the driver
+provides a writeable module parameter, 'delay', which can be used to
+set the interval to a value between 0 and 65,535 microseconds.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+in1_label "vin"
+in1_input Measured input voltage.
+in1_lcrit Critical minimum input voltage.
+in1_crit Critical maximum input voltage.
+in1_lcrit_alarm Input voltage critical low alarm.
+in1_crit_alarm Input voltage critical high alarm.
+
+in2_label "vout1"
+in2_input Measured output voltage.
+in2_lcrit Critical minimum output Voltage.
+in2_crit Critical maximum output voltage.
+in2_lcrit_alarm Critical output voltage critical low alarm.
+in2_crit_alarm Critical output voltage critical high alarm.
+
+curr1_label "iout1"
+curr1_input Measured output current.
+curr1_crit Critical maximum output current.
+curr1_crit_alarm Output current critical high alarm.
+
+temp1_input Measured maximum temperature of all phases.
+temp1_max Maximum temperature limit.
+temp1_max_alarm High temperature alarm.
+temp1_crit Critical maximum temperature limit.
+temp1_crit_alarm Critical maximum temperature alarm.
+======================= ========================================================
diff --git a/Documentation/hwmon/max16064.rst b/Documentation/hwmon/max16064.rst
new file mode 100644
index 000000000..c06249292
--- /dev/null
+++ b/Documentation/hwmon/max16064.rst
@@ -0,0 +1,75 @@
+Kernel driver max16064
+======================
+
+Supported chips:
+
+ * Maxim MAX16064
+
+ Prefix: 'max16064'
+
+ Addresses scanned: -
+
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Maxim MAX16064 Quad Power-Supply
+Controller with Active-Voltage Output Control and PMBus Interface.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+in[1-4]_label "vout[1-4]"
+in[1-4]_input Measured voltage. From READ_VOUT register.
+in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
+ register.
+in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
+ status.
+in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
+ status.
+in[1-4]_highest Historical maximum voltage.
+in[1-4]_reset_history Write any value to reset history.
+
+temp1_input Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm Chip temperature high alarm. Set by comparing
+ READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+ status is set.
+temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
+ READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+ status is set.
+temp1_highest Historical maximum temperature.
+temp1_reset_history Write any value to reset history.
+======================= ========================================================
diff --git a/Documentation/hwmon/max16065.rst b/Documentation/hwmon/max16065.rst
new file mode 100644
index 000000000..45f69f334
--- /dev/null
+++ b/Documentation/hwmon/max16065.rst
@@ -0,0 +1,127 @@
+Kernel driver max16065
+======================
+
+
+Supported chips:
+
+ * Maxim MAX16065, MAX16066
+
+ Prefixes: 'max16065', 'max16066'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf
+
+ * Maxim MAX16067
+
+ Prefix: 'max16067'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf
+
+ * Maxim MAX16068
+
+ Prefix: 'max16068'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf
+
+ * Maxim MAX16070/MAX16071
+
+ Prefixes: 'max16070', 'max16071'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+[From datasheets] The MAX16065/MAX16066 flash-configurable system managers
+monitor and sequence multiple system voltages. The MAX16065/MAX16066 can also
+accurately monitor (+/-2.5%) one current channel using a dedicated high-side
+current-sense amplifier. The MAX16065 manages up to twelve system voltages
+simultaneously, and the MAX16066 manages up to eight supply voltages.
+
+The MAX16067 flash-configurable system manager monitors and sequences multiple
+system voltages. The MAX16067 manages up to six system voltages simultaneously.
+
+The MAX16068 flash-configurable system manager monitors and manages up to six
+system voltages simultaneously.
+
+The MAX16070/MAX16071 flash-configurable system monitors supervise multiple
+system voltages. The MAX16070/MAX16071 can also accurately monitor (+/-2.5%)
+one current channel using a dedicated high-side current-sense amplifier. The
+MAX16070 monitors up to twelve system voltages simultaneously, and the MAX16071
+monitors up to eight supply voltages.
+
+Each monitored channel has its own low and high critical limits. MAX16065,
+MAX16066, MAX16070, and MAX16071 support an additional limit which is
+configurable as either low or high secondary limit. MAX16065, MAX16066,
+MAX16070, and MAX16071 also support supply current monitoring.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for devices, since there is no register which
+can be safely used to identify the chip. You will have to instantiate
+the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+WARNING: Do not access chip registers using the i2cdump command, and do not use
+any of the i2ctools commands on a command register (0xa5 to 0xac). The chips
+supported by this driver interpret any access to a command register (including
+read commands) as request to execute the command in question. This may result in
+power loss, board resets, and/or Flash corruption. Worst case, your board may
+turn into a brick.
+
+
+Sysfs entries
+-------------
+
+======================= ========================================================
+in[0-11]_input Input voltage measurements.
+
+in12_input Voltage on CSP (Current Sense Positive) pin.
+ Only if the chip supports current sensing and if
+ current sensing is enabled.
+
+in[0-11]_min Low warning limit.
+ Supported on MAX16065, MAX16066, MAX16070, and MAX16071
+ only.
+
+in[0-11]_max High warning limit.
+ Supported on MAX16065, MAX16066, MAX16070, and MAX16071
+ only.
+
+ Either low or high warning limits are supported
+ (depending on chip configuration), but not both.
+
+in[0-11]_lcrit Low critical limit.
+
+in[0-11]_crit High critical limit.
+
+in[0-11]_alarm Input voltage alarm.
+
+curr1_input Current sense input; only if the chip supports current
+ sensing and if current sensing is enabled.
+ Displayed current assumes 0.001 Ohm current sense
+ resistor.
+
+curr1_alarm Overcurrent alarm; only if the chip supports current
+ sensing and if current sensing is enabled.
+======================= ========================================================
diff --git a/Documentation/hwmon/max1619.rst b/Documentation/hwmon/max1619.rst
new file mode 100644
index 000000000..e25956e70
--- /dev/null
+++ b/Documentation/hwmon/max1619.rst
@@ -0,0 +1,33 @@
+Kernel driver max1619
+=====================
+
+Supported chips:
+
+ * Maxim MAX1619
+
+ Prefix: 'max1619'
+
+ Addresses scanned: I2C 0x18-0x1a, 0x29-0x2b, 0x4c-0x4e
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
+
+Authors:
+ - Oleksij Rempel <bug-track@fisher-privat.net>,
+ - Jean Delvare <jdelvare@suse.de>
+
+Description
+-----------
+
+The MAX1619 is a digital temperature sensor. It senses its own temperature as
+well as the temperature of up to one external diode.
+
+All temperature values are given in degrees Celsius. Resolution
+is 1.0 degree for the local temperature and for the remote temperature.
+
+Only the external sensor has high and low limits.
+
+The max1619 driver will not update its values more frequently than every
+other second; reading them more often will do no harm, but will return
+'old' values.
diff --git a/Documentation/hwmon/max16601.rst b/Documentation/hwmon/max16601.rst
new file mode 100644
index 000000000..6a4eef8ef
--- /dev/null
+++ b/Documentation/hwmon/max16601.rst
@@ -0,0 +1,136 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver max16601
+======================
+
+Supported chips:
+
+ * Maxim MAX16508
+
+ Prefix: 'max16508'
+
+ Addresses scanned: -
+
+ Datasheet: Not published
+
+ * Maxim MAX16601
+
+ Prefix: 'max16601'
+
+ Addresses scanned: -
+
+ Datasheet: Not published
+
+ * Maxim MAX16602
+
+ Prefix: 'max16602'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX16602.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports the MAX16508 VR13 Dual-Output Voltage Regulator
+as well as the MAX16601 VR13.HC Dual-Output Voltage Regulator chipsets.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+=============================== ===============================================
+in1_label "vin1"
+in1_input VCORE input voltage.
+in1_alarm Input voltage alarm.
+
+in2_label "vout1"
+in2_input VCORE output voltage.
+in2_alarm Output voltage alarm.
+
+curr1_label "iin1"
+curr1_input VCORE input current, derived from duty cycle
+ and output current.
+curr1_max Maximum input current.
+curr1_max_alarm Current high alarm.
+
+curr[P+2]_label "iin1.P"
+curr[P+2]_input VCORE phase P input current.
+
+curr[N+2]_label "iin2"
+curr[N+2]_input VCORE input current, derived from sensor
+ element.
+ 'N' is the number of enabled/populated phases.
+
+curr[N+3]_label "iin3"
+curr[N+3]_input VSA input current.
+
+curr[N+4]_label "iout1"
+curr[N+4]_input VCORE output current.
+curr[N+4]_crit Critical output current.
+curr[N+4]_crit_alarm Output current critical alarm.
+curr[N+4]_max Maximum output current.
+curr[N+4]_max_alarm Output current high alarm.
+
+curr[N+P+5]_label "iout1.P"
+curr[N+P+5]_input VCORE phase P output current.
+
+curr[2*N+5]_label "iout3"
+curr[2*N+5]_input VSA output current.
+curr[2*N+5]_highest Historical maximum VSA output current.
+curr[2*N+5]_reset_history Write any value to reset curr21_highest.
+curr[2*N+5]_crit Critical output current.
+curr[2*N+5]_crit_alarm Output current critical alarm.
+curr[2*N+5]_max Maximum output current.
+curr[2*N+5]_max_alarm Output current high alarm.
+
+power1_label "pin1"
+power1_input Input power, derived from duty cycle and output
+ current.
+power1_alarm Input power alarm.
+
+power2_label "pin2"
+power2_input Input power, derived from input current sensor.
+
+power3_label "pout"
+power3_input Output power.
+
+temp1_input VCORE temperature.
+temp1_crit Critical high temperature.
+temp1_crit_alarm Chip temperature critical high alarm.
+temp1_max Maximum temperature.
+temp1_max_alarm Chip temperature high alarm.
+
+temp2_input TSENSE_0 temperature
+temp3_input TSENSE_1 temperature
+temp4_input TSENSE_2 temperature
+temp5_input TSENSE_3 temperature
+
+temp6_input VSA temperature.
+temp6_crit Critical high temperature.
+temp6_crit_alarm Chip temperature critical high alarm.
+temp6_max Maximum temperature.
+temp6_max_alarm Chip temperature high alarm.
+=============================== ===============================================
diff --git a/Documentation/hwmon/max1668.rst b/Documentation/hwmon/max1668.rst
new file mode 100644
index 000000000..417f17d75
--- /dev/null
+++ b/Documentation/hwmon/max1668.rst
@@ -0,0 +1,70 @@
+Kernel driver max1668
+=====================
+
+Supported chips:
+
+ * Maxim MAX1668, MAX1805 and MAX1989
+
+ Prefix: 'max1668'
+
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e
+
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX1668-MAX1989.pdf
+
+Author:
+
+ David George <david.george@ska.ac.za>
+
+Description
+-----------
+
+This driver implements support for the Maxim MAX1668, MAX1805 and MAX1989
+chips.
+
+The three devices are very similar, but the MAX1805 has a reduced feature
+set; only two remote temperature inputs vs the four available on the other
+two ICs.
+
+The driver is able to distinguish between the devices and creates sysfs
+entries as follows:
+
+- MAX1805, MAX1668 and MAX1989:
+
+=============== == ============================================================
+temp1_input ro local (ambient) temperature
+temp1_max rw local temperature maximum threshold for alarm
+temp1_max_alarm ro local temperature maximum threshold alarm
+temp1_min rw local temperature minimum threshold for alarm
+temp1_min_alarm ro local temperature minimum threshold alarm
+temp2_input ro remote temperature 1
+temp2_max rw remote temperature 1 maximum threshold for alarm
+temp2_max_alarm ro remote temperature 1 maximum threshold alarm
+temp2_min rw remote temperature 1 minimum threshold for alarm
+temp2_min_alarm ro remote temperature 1 minimum threshold alarm
+temp3_input ro remote temperature 2
+temp3_max rw remote temperature 2 maximum threshold for alarm
+temp3_max_alarm ro remote temperature 2 maximum threshold alarm
+temp3_min rw remote temperature 2 minimum threshold for alarm
+temp3_min_alarm ro remote temperature 2 minimum threshold alarm
+=============== == ============================================================
+
+- MAX1668 and MAX1989 only:
+
+=============== == ============================================================
+temp4_input ro remote temperature 3
+temp4_max rw remote temperature 3 maximum threshold for alarm
+temp4_max_alarm ro remote temperature 3 maximum threshold alarm
+temp4_min rw remote temperature 3 minimum threshold for alarm
+temp4_min_alarm ro remote temperature 3 minimum threshold alarm
+temp5_input ro remote temperature 4
+temp5_max rw remote temperature 4 maximum threshold for alarm
+temp5_max_alarm ro remote temperature 4 maximum threshold alarm
+temp5_min rw remote temperature 4 minimum threshold for alarm
+temp5_min_alarm ro remote temperature 4 minimum threshold alarm
+=============== == ============================================================
+
+Module Parameters
+-----------------
+
+* read_only: int
+ Set to non-zero if you wish to prevent write access to alarm thresholds.
diff --git a/Documentation/hwmon/max197.rst b/Documentation/hwmon/max197.rst
new file mode 100644
index 000000000..02fe19bc3
--- /dev/null
+++ b/Documentation/hwmon/max197.rst
@@ -0,0 +1,70 @@
+Kernel driver max197
+====================
+
+Author:
+
+ * Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+
+Supported chips:
+
+ * Maxim MAX197
+
+ Prefix: 'max197'
+
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX197.pdf
+
+ * Maxim MAX199
+
+ Prefix: 'max199'
+
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX199.pdf
+
+Description
+-----------
+
+The A/D converters MAX197, and MAX199 are both 8-Channel, Multi-Range, 5V,
+12-Bit DAS with 8+4 Bus Interface and Fault Protection.
+
+The available ranges for the MAX197 are {0,-5V} to 5V, and {0,-10V} to 10V,
+while they are {0,-2V} to 2V, and {0,-4V} to 4V on the MAX199.
+
+Platform data
+-------------
+
+The MAX197 platform data (defined in linux/platform_data/max197.h) should be
+filled with a pointer to a conversion function, defined like::
+
+ int convert(u8 ctrl);
+
+ctrl is the control byte to write to start a new conversion.
+On success, the function must return the 12-bit raw value read from the chip,
+or a negative error code otherwise.
+
+Control byte format:
+
+======= ========== ============================================
+Bit Name Description
+7,6 PD1,PD0 Clock and Power-Down modes
+5 ACQMOD Internal or External Controlled Acquisition
+4 RNG Full-scale voltage magnitude at the input
+3 BIP Unipolar or Bipolar conversion mode
+2,1,0 A2,A1,A0 Channel
+======= ========== ============================================
+
+Sysfs interface
+---------------
+
+ ============== ==============================================================
+ in[0-7]_input The conversion value for the corresponding channel.
+ RO
+
+ in[0-7]_min The lower limit (in mV) for the corresponding channel.
+ For the MAX197, it will be adjusted to -10000, -5000, or 0.
+ For the MAX199, it will be adjusted to -4000, -2000, or 0.
+ RW
+
+ in[0-7]_max The higher limit (in mV) for the corresponding channel.
+ For the MAX197, it will be adjusted to 0, 5000, or 10000.
+ For the MAX199, it will be adjusted to 0, 2000, or 4000.
+ RW
+ ============== ==============================================================
diff --git a/Documentation/hwmon/max20730.rst b/Documentation/hwmon/max20730.rst
new file mode 100644
index 000000000..cb0c95b2b
--- /dev/null
+++ b/Documentation/hwmon/max20730.rst
@@ -0,0 +1,82 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver max20730
+======================
+
+Supported chips:
+
+ * Maxim MAX20710
+
+ Prefix: 'max20710'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20710.pdf
+
+ * Maxim MAX20730
+
+ Prefix: 'max20730'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf
+
+ * Maxim MAX20734
+
+ Prefix: 'max20734'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf
+
+ * Maxim MAX20743
+
+ Prefix: 'max20743'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver implements support for Maxim MAX20710, MAX20730, MAX20734, and MAX20743
+Integrated, Step-Down Switching Regulators with PMBus support.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Sysfs entries
+-------------
+
+=================== ===== =======================================================
+curr1_crit RW/RO Critical output current. Please see datasheet for
+ supported limits. Read-only if the chip is
+ write protected; read-write otherwise.
+curr1_crit_alarm RO Output current critical alarm
+curr1_input RO Output current
+curr1_label RO 'iout1'
+in1_alarm RO Input voltage alarm
+in1_input RO Input voltage
+in1_label RO 'vin'
+in2_alarm RO Output voltage alarm
+in2_input RO Output voltage
+in2_label RO 'vout1'
+temp1_crit RW/RO Critical temeperature. Supported values are 130 or 150
+ degrees C. Read-only if the chip is write protected;
+ read-write otherwise.
+temp1_crit_alarm RO Temperature critical alarm
+temp1_input RO Chip temperature
+=================== ===== =======================================================
diff --git a/Documentation/hwmon/max20751.rst b/Documentation/hwmon/max20751.rst
new file mode 100644
index 000000000..f9febefce
--- /dev/null
+++ b/Documentation/hwmon/max20751.rst
@@ -0,0 +1,84 @@
+Kernel driver max20751
+======================
+
+Supported chips:
+
+ * maxim MAX20751
+
+ Prefix: 'max20751'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20751.pdf
+
+ Application note: https://pdfserv.maximintegrated.com/en/an/AN5941.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports MAX20751 Multiphase Master with PMBus Interface
+and Internal Buck Converter.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= =======================================================
+in1_label "vin1"
+in1_input Measured voltage.
+in1_min Minimum input voltage.
+in1_max Maximum input voltage.
+in1_lcrit Critical minimum input voltage.
+in1_crit Critical maximum input voltage.
+in1_min_alarm Input voltage low alarm.
+in1_lcrit_alarm Input voltage critical low alarm.
+in1_min_alarm Input voltage low alarm.
+in1_max_alarm Input voltage high alarm.
+
+in2_label "vout1"
+in2_input Measured voltage.
+in2_min Minimum output voltage.
+in2_max Maximum output voltage.
+in2_lcrit Critical minimum output voltage.
+in2_crit Critical maximum output voltage.
+in2_min_alarm Output voltage low alarm.
+in2_lcrit_alarm Output voltage critical low alarm.
+in2_min_alarm Output voltage low alarm.
+in2_max_alarm Output voltage high alarm.
+
+curr1_input Measured output current.
+curr1_label "iout1"
+curr1_max Maximum output current.
+curr1_alarm Current high alarm.
+
+temp1_input Measured temperature.
+temp1_max Maximum temperature.
+temp1_crit Critical high temperature.
+temp1_max_alarm Chip temperature high alarm.
+temp1_crit_alarm Chip temperature critical high alarm.
+
+power1_input Output power.
+power1_label "pout1"
+======================= =======================================================
diff --git a/Documentation/hwmon/max31722.rst b/Documentation/hwmon/max31722.rst
new file mode 100644
index 000000000..0ab15c00b
--- /dev/null
+++ b/Documentation/hwmon/max31722.rst
@@ -0,0 +1,46 @@
+Kernel driver max31722
+======================
+
+Supported chips:
+
+ * Maxim Integrated MAX31722
+
+ Prefix: 'max31722'
+
+ ACPI ID: MAX31722
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf
+
+ * Maxim Integrated MAX31723
+
+ Prefix: 'max31723'
+
+ ACPI ID: MAX31723
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf
+
+Author: Tiberiu Breana <tiberiu.a.breana@intel.com>
+
+Description
+-----------
+
+This driver adds support for the Maxim Integrated MAX31722/MAX31723 thermometers
+and thermostats running over an SPI interface.
+
+Usage Notes
+-----------
+
+This driver uses ACPI to auto-detect devices. See ACPI IDs in the above section.
+
+Sysfs entries
+-------------
+
+The following attribute is supported:
+
+======================= =======================================================
+temp1_input Measured temperature. Read-only.
+======================= =======================================================
diff --git a/Documentation/hwmon/max31730.rst b/Documentation/hwmon/max31730.rst
new file mode 100644
index 000000000..def0de19d
--- /dev/null
+++ b/Documentation/hwmon/max31730.rst
@@ -0,0 +1,44 @@
+Kernel driver max31790
+======================
+
+Supported chips:
+
+ * Maxim MAX31730
+
+ Prefix: 'max31730'
+
+ Addresses scanned: 0x1c, 0x1d, 0x1e, 0x1f, 0x4c, 0x4d, 0x4e, 0x4f
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31730.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver implements support for Maxim MAX31730.
+
+The MAX31730 temperature sensor monitors its own temperature and the
+temperatures of three external diode-connected transistors. The operating
+supply voltage is from 3.0V to 3.6V. Resistance cancellation compensates
+for high series resistance in circuit-board traces and the external thermal
+diode, while beta compensation corrects for temperature-measurement
+errors due to low-beta sensing transistors.
+
+
+Sysfs entries
+-------------
+
+=================== == =======================================================
+temp[1-4]_enable RW Temperature enable/disable
+ Set to 0 to enable channel, 0 to disable
+temp[1-4]_input RO Temperature input
+temp[2-4]_fault RO Fault indicator for remote channels
+temp[1-4]_max RW Maximum temperature
+temp[1-4]_max_alarm RW Maximum temperature alarm
+temp[1-4]_min RW Minimum temperature. Common for all channels.
+ Only temp1_min is writeable.
+temp[1-4]_min_alarm RO Minimum temperature alarm
+temp[2-4]_offset RW Temperature offset for remote channels
+=================== == =======================================================
diff --git a/Documentation/hwmon/max31760.rst b/Documentation/hwmon/max31760.rst
new file mode 100644
index 000000000..b1b55fb84
--- /dev/null
+++ b/Documentation/hwmon/max31760.rst
@@ -0,0 +1,77 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver max31760
+======================
+
+Supported chips:
+ * Analog Devices MAX31760
+
+ Prefix: 'max31760'
+
+ Addresses scanned: none
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf
+
+
+Author: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+Description
+-----------
+
+The MAX31760 integrates temperature sensing along with precision PWM fan
+control. It accurately measures its local die temperature and the remote
+temperature of a discrete diode-connected transistor, such as a 2N3906,
+or a thermal diode commonly found on CPUs, graphics processor units (GPUs),
+and other ASICs. Multiple temperature thresholds, such as local
+high/overtemperature (OT) and remote high/overtemperature, can be set by an
+I2C-compatible interface. Fan speed is controlled based on the temperature
+reading as an index to a 48-byte lookup table (LUT) containing
+user-programmed PWM values. The flexible LUT-based architecture enables
+the user to program a smooth nonlinear fan speed vs. temperature transfer
+function to minimize acoustic fan noise. Two tachometer inputs allow
+measuring the speeds of two fans independently. When the local or remote
+OT threshold is exceeded, the SHDN pin is asserted low and can be used to
+shut down the system. A dedicated ALERT pin reports that either a local or
+remote high-temperature threshold has been exceeded.
+
+Temperature measurement range: from -55°C to 125°C
+
+Temperature Resolution: 11 Bits, ±0.125°C
+
+Please refer how to instantiate this driver: Documentation/i2c/instantiating-devices.rst
+
+Lookup table for auto fan control
+---------------------------------
+
+========= =================================
+LUT Index Name
+========= =================================
+1 PWM value for T < +18°C
+2 PWM value for +18°C ≤ T < +20°C
+3 PWM value for +20°C ≤ T < +22°C
+... ...
+47 PWM value for +108°C ≤ T < +110°C
+48 PWM value for T ≥ +110°C
+========= =================================
+
+Sysfs entries
+-------------
+
+=============================== =================================================================================
+fan[1-2]_input Fan speed (in RPM)
+fan[1-2]_enable Enable fan readings and fan fault alarms
+fan[1-2]_fault Fan fault status
+temp[1-2]_label "Remote" and "Local" temperature channel labels
+temp[1-2]_input Temperature sensor readings (in millidegrees Celsius)
+temp1_fault Remote temperature sensor fault status
+temp[1-2]_max Temperature max value. Asserts "ALERT" pin when exceeded
+temp[1-2]_max_alarm Temperature max alarm status
+temp[1-2]_crit Temperature critical value. Asserts "SHDN" pin when exceeded
+temp[1-2]_crit_alarm Temperature critical alarm status
+pwm1 PWM value for direct fan control
+pwm1_enable 1: direct fan control, 2: temperature based auto fan control
+pwm1_freq PWM frequency in hertz
+pwm1_auto_channels_temp Temperature source for auto fan control. 1: temp1, 2: temp2, 3: max(temp1, temp2)
+pwm1_auto_point[1-48]_pwm PWM value for LUT point
+pwm1_auto_point_temp_hyst Temperature hysteresis for auto fan control. Can be either 2000mC or 4000mC
+=============================== =================================================================================
diff --git a/Documentation/hwmon/max31785.rst b/Documentation/hwmon/max31785.rst
new file mode 100644
index 000000000..c8c6756d0
--- /dev/null
+++ b/Documentation/hwmon/max31785.rst
@@ -0,0 +1,66 @@
+Kernel driver max31785
+======================
+
+Supported chips:
+
+ * Maxim MAX31785, MAX31785A
+
+ Prefix: 'max31785' or 'max31785a'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
+
+Author: Andrew Jeffery <andrew@aj.id.au>
+
+Description
+-----------
+
+The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan
+management with temperature and remote voltage sensing. Various fan control
+features are provided, including PWM frequency control, temperature hysteresis,
+dual tachometer measurements, and fan health monitoring.
+
+For dual-rotor configurations the MAX31785A exposes the second rotor tachometer
+readings in attributes fan[5-8]_input. By contrast the MAX31785 only exposes
+the slowest rotor measurement, and does so in the fan[1-4]_input attributes.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Sysfs attributes
+----------------
+
+======================= =======================================================
+fan[1-4]_alarm Fan alarm.
+fan[1-4]_fault Fan fault.
+fan[1-8]_input Fan RPM. On the MAX31785A, inputs 5-8 correspond to the
+ second rotor of fans 1-4
+fan[1-4]_target Fan input target
+
+in[1-6]_crit Critical maximum output voltage
+in[1-6]_crit_alarm Output voltage critical high alarm
+in[1-6]_input Measured output voltage
+in[1-6]_label "vout[18-23]"
+in[1-6]_lcrit Critical minimum output voltage
+in[1-6]_lcrit_alarm Output voltage critical low alarm
+in[1-6]_max Maximum output voltage
+in[1-6]_max_alarm Output voltage high alarm
+in[1-6]_min Minimum output voltage
+in[1-6]_min_alarm Output voltage low alarm
+
+pwm[1-4] Fan target duty cycle (0..255)
+pwm[1-4]_enable 0: Full-speed
+ 1: Manual PWM control
+ 2: Automatic PWM (tach-feedback RPM fan-control)
+ 3: Automatic closed-loop (temp-feedback fan-control)
+
+temp[1-11]_crit Critical high temperature
+temp[1-11]_crit_alarm Chip temperature critical high alarm
+temp[1-11]_input Measured temperature
+temp[1-11]_max Maximum temperature
+temp[1-11]_max_alarm Chip temperature high alarm
+======================= =======================================================
diff --git a/Documentation/hwmon/max31790.rst b/Documentation/hwmon/max31790.rst
new file mode 100644
index 000000000..33c5c7330
--- /dev/null
+++ b/Documentation/hwmon/max31790.rst
@@ -0,0 +1,45 @@
+Kernel driver max31790
+======================
+
+Supported chips:
+
+ * Maxim MAX31790
+
+ Prefix: 'max31790'
+
+ Addresses scanned: -
+
+ Datasheet: https://pdfserv.maximintegrated.com/en/ds/MAX31790.pdf
+
+Author: Il Han <corone.il.han@gmail.com>
+
+
+Description
+-----------
+
+This driver implements support for the Maxim MAX31790 chip.
+
+The MAX31790 controls the speeds of up to six fans using six independent
+PWM outputs. The desired fan speeds (or PWM duty cycles) are written
+through the I2C interface. The outputs drive "4-wire" fans directly,
+or can be used to modulate the fan's power terminals using an external
+pass transistor.
+
+Tachometer inputs monitor fan tachometer logic outputs for precise (+/-1%)
+monitoring and control of fan RPM as well as detection of fan failure.
+Six pins are dedicated tachometer inputs. Any of the six PWM outputs can
+also be configured to serve as tachometer inputs.
+
+
+Sysfs entries
+-------------
+
+================== === =======================================================
+fan[1-12]_input RO fan tachometer speed in RPM
+fan[1-12]_fault RO fan experienced fault
+fan[1-6]_target RW desired fan speed in RPM
+fan[1-6]_enable RW enable or disable the tachometer input
+pwm[1-6]_enable RW regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode
+pwm[1-6] RW read: current pwm duty cycle,
+ write: target pwm duty cycle (0-255)
+================== === =======================================================
diff --git a/Documentation/hwmon/max34440.rst b/Documentation/hwmon/max34440.rst
new file mode 100644
index 000000000..162d289f0
--- /dev/null
+++ b/Documentation/hwmon/max34440.rst
@@ -0,0 +1,195 @@
+Kernel driver max34440
+======================
+
+Supported chips:
+
+ * Maxim MAX34440
+
+ Prefixes: 'max34440'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34440.pdf
+
+ * Maxim MAX34441
+
+ PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
+
+ Prefixes: 'max34441'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34441.pdf
+
+ * Maxim MAX34446
+
+ PMBus Power-Supply Data Logger
+
+ Prefixes: 'max34446'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34446.pdf
+
+ * Maxim MAX34451
+
+ PMBus 16-Channel V/I Monitor and 12-Channel Sequencer/Marginer
+
+ Prefixes: 'max34451'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34451.pdf
+
+ * Maxim MAX34460
+
+ PMBus 12-Channel Voltage Monitor & Sequencer
+
+ Prefix: 'max34460'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34460.pdf
+
+ * Maxim MAX34461
+
+ PMBus 16-Channel Voltage Monitor & Sequencer
+
+ Prefix: 'max34461'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34461.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Maxim MAX34440 PMBus 6-Channel
+Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
+and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
+It also supports the MAX34451, MAX34460, and MAX34461 PMBus Voltage Monitor &
+Sequencers. The MAX34451 supports monitoring voltage or current of 12 channels
+based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461
+supports 16 voltage channels.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+For MAX34446, the value of the currX_crit attribute determines if current or
+voltage measurement is enabled for a given channel. Voltage measurement is
+enabled if currX_crit is set to 0; current measurement is enabled if the
+attribute is set to a positive value. Power measurement is only enabled if
+channel 1 (3) is configured for voltage measurement, and channel 2 (4) is
+configured for current measurement.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+In
+~~
+
+======================= =======================================================
+in[1-6]_label "vout[1-6]".
+in[1-6]_input Measured voltage. From READ_VOUT register.
+in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
+ register.
+in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
+ status.
+in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
+ status.
+in[1-6]_lowest Historical minimum voltage.
+in[1-6]_highest Historical maximum voltage.
+in[1-6]_reset_history Write any value to reset history.
+======================= =======================================================
+
+.. note:: MAX34446 only supports in[1-4].
+
+Curr
+~~~~
+
+======================= ========================================================
+curr[1-6]_label "iout[1-6]".
+curr[1-6]_input Measured current. From READ_IOUT register.
+curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
+ register.
+curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
+curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+curr[1-4]_average Historical average current (MAX34446/34451 only).
+curr[1-6]_highest Historical maximum current.
+curr[1-6]_reset_history Write any value to reset history.
+======================= ========================================================
+
+.. note::
+
+ - in6 and curr6 attributes only exist for MAX34440.
+ - MAX34446 only supports curr[1-4].
+
+Power
+~~~~~
+
+======================= ========================================================
+power[1,3]_label "pout[1,3]"
+power[1,3]_input Measured power.
+power[1,3]_average Historical average power.
+power[1,3]_highest Historical maximum power.
+======================= ========================================================
+
+.. note:: Power attributes only exist for MAX34446.
+
+Temp
+~~~~
+
+======================= ========================================================
+temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register.
+ temp1 is the chip's internal temperature. temp2..temp5
+ are remote I2C temperature sensors. For MAX34441, temp6
+ is a remote thermal-diode sensor. For MAX34440, temp6..8
+ are remote I2C temperature sensors.
+temp[1-8]_max Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-8]_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-8]_max_alarm Temperature high alarm.
+temp[1-8]_crit_alarm Temperature critical high alarm.
+temp[1-8]_average Historical average temperature (MAX34446 only).
+temp[1-8]_highest Historical maximum temperature.
+temp[1-8]_reset_history Write any value to reset history.
+======================= ========================================================
+
+
+.. note::
+ - temp7 and temp8 attributes only exist for MAX34440.
+ - MAX34446 only supports temp[1-3].
+
+
+.. note::
+
+ - MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on
+ input pins) and temp[1-5].
+ - MAX34460 supports attribute groups in[1-12] and temp[1-5].
+ - MAX34461 supports attribute groups in[1-16] and temp[1-5].
diff --git a/Documentation/hwmon/max6620.rst b/Documentation/hwmon/max6620.rst
new file mode 100644
index 000000000..84c1c44d3
--- /dev/null
+++ b/Documentation/hwmon/max6620.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver max6620
+=====================
+
+Supported chips:
+
+ Maxim MAX6620
+
+ Prefix: 'max6620'
+
+ Addresses scanned: none
+
+ Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf
+
+Authors:
+ - L\. Grunenberg <contact@lgrunenberg.de>
+ - Cumulus Networks <support@cumulusnetworks.com>
+ - Shuotian Cheng <shuche@microsoft.com>
+ - Arun Saravanan Balachandran <Arun_Saravanan_Balac@dell.com>
+
+Description
+-----------
+
+This driver implements support for Maxim MAX6620 fan controller.
+
+The driver configures the fan controller in RPM mode. To give the readings more
+range or accuracy, the desired value can be set by a programmable register
+(1, 2, 4, 8, 16 or 32). Set higher values for larger speeds.
+
+The driver provides the following sensor access in sysfs:
+
+================ ======= =====================================================
+fan[1-4]_alarm ro Fan alarm.
+fan[1-4]_div rw Sets the nominal RPM range of the fan. Valid values
+ are 1, 2, 4, 8, 16 and 32.
+fan[1-4]_input ro Fan speed in RPM.
+fan[1-4]_target rw Desired fan speed in RPM.
+================ ======= =====================================================
+
+Usage notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
diff --git a/Documentation/hwmon/max6639.rst b/Documentation/hwmon/max6639.rst
new file mode 100644
index 000000000..c85d285a3
--- /dev/null
+++ b/Documentation/hwmon/max6639.rst
@@ -0,0 +1,55 @@
+Kernel driver max6639
+=====================
+
+Supported chips:
+
+ * Maxim MAX6639
+
+ Prefix: 'max6639'
+
+ Addresses scanned: I2C 0x2c, 0x2e, 0x2f
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf
+
+Authors:
+ - He Changqing <hechangqing@semptian.com>
+ - Roland Stigge <stigge@antcom.de>
+
+Description
+-----------
+
+This driver implements support for the Maxim MAX6639. This chip is a 2-channel
+temperature monitor with dual PWM fan speed controller. It can monitor its own
+temperature and one external diode-connected transistor or two external
+diode-connected transistors.
+
+The following device attributes are implemented via sysfs:
+
+====================== ==== ===================================================
+Attribute R/W Contents
+====================== ==== ===================================================
+temp1_input R Temperature channel 1 input (0..150 C)
+temp2_input R Temperature channel 2 input (0..150 C)
+temp1_fault R Temperature channel 1 diode fault
+temp2_fault R Temperature channel 2 diode fault
+temp1_max RW Set THERM temperature for input 1
+ (in C, see datasheet)
+temp2_max RW Set THERM temperature for input 2
+temp1_crit RW Set ALERT temperature for input 1
+temp2_crit RW Set ALERT temperature for input 2
+temp1_emergency RW Set OT temperature for input 1
+ (in C, see datasheet)
+temp2_emergency RW Set OT temperature for input 2
+pwm1 RW Fan 1 target duty cycle (0..255)
+pwm2 RW Fan 2 target duty cycle (0..255)
+fan1_input R TACH1 fan tachometer input (in RPM)
+fan2_input R TACH2 fan tachometer input (in RPM)
+fan1_fault R Fan 1 fault
+fan2_fault R Fan 2 fault
+temp1_max_alarm R Alarm on THERM temperature on channel 1
+temp2_max_alarm R Alarm on THERM temperature on channel 2
+temp1_crit_alarm R Alarm on ALERT temperature on channel 1
+temp2_crit_alarm R Alarm on ALERT temperature on channel 2
+temp1_emergency_alarm R Alarm on OT temperature on channel 1
+temp2_emergency_alarm R Alarm on OT temperature on channel 2
+====================== ==== ===================================================
diff --git a/Documentation/hwmon/max6642.rst b/Documentation/hwmon/max6642.rst
new file mode 100644
index 000000000..7e5b7d4f9
--- /dev/null
+++ b/Documentation/hwmon/max6642.rst
@@ -0,0 +1,27 @@
+Kernel driver max6642
+=====================
+
+Supported chips:
+
+ * Maxim MAX6642
+
+ Prefix: 'max6642'
+
+ Addresses scanned: I2C 0x48-0x4f
+
+ Datasheet: Publicly available at the Maxim website
+
+ http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf
+
+Authors:
+
+ Per Dalen <per.dalen@appeartv.com>
+
+Description
+-----------
+
+The MAX6642 is a digital temperature sensor. It senses its own temperature as
+well as the temperature on one external diode.
+
+All temperature values are given in degrees Celsius. Resolution
+is 0.25 degree for the local temperature and for the remote temperature.
diff --git a/Documentation/hwmon/max6650.rst b/Documentation/hwmon/max6650.rst
new file mode 100644
index 000000000..7952b6eca
--- /dev/null
+++ b/Documentation/hwmon/max6650.rst
@@ -0,0 +1,74 @@
+Kernel driver max6650
+=====================
+
+Supported chips:
+
+ * Maxim MAX6650
+
+ Prefix: 'max6650'
+
+ Addresses scanned: none
+
+ Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
+
+ * Maxim MAX6651
+
+ Prefix: 'max6651'
+
+ Addresses scanned: none
+
+ Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
+
+Authors:
+ - Hans J. Koch <hjk@hansjkoch.de>
+ - John Morris <john.morris@spirentcom.com>
+ - Claus Gindhart <claus.gindhart@kontron.com>
+
+Description
+-----------
+
+This driver implements support for the Maxim MAX6650 and MAX6651.
+
+The 2 devices are very similar, but the MAX6550 has a reduced feature
+set, e.g. only one fan-input, instead of 4 for the MAX6651.
+
+The driver is not able to distinguish between the 2 devices.
+
+The driver provides the following sensor accesses in sysfs:
+
+=============== ======= =======================================================
+fan1_input ro fan tachometer speed in RPM
+fan2_input ro "
+fan3_input ro "
+fan4_input ro "
+fan1_target rw desired fan speed in RPM (closed loop mode only)
+pwm1_enable rw regulator mode, 0=full on, 1=open loop, 2=closed loop
+ 3=off
+pwm1 rw relative speed (0-255), 255=max. speed.
+ Used in open loop mode only.
+fan1_div rw sets the speed range the inputs can handle. Legal
+ values are 1, 2, 4, and 8. Use lower values for
+ faster fans.
+=============== ======= =======================================================
+
+Usage notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+Module parameters
+-----------------
+
+If your board has a BIOS that initializes the MAX6650/6651 correctly, you can
+simply load your module without parameters. It won't touch the configuration
+registers then. If your board BIOS doesn't initialize the chip, or you want
+different settings, you can set the following parameters:
+
+voltage_12V: 5=5V fan, 12=12V fan, 0=don't change
+prescaler: Possible values are 1,2,4,8,16, or 0 for don't change
+clock: The clock frequency in Hz of the chip the driver should assume [254000]
+
+Please have a look at the MAX6650/6651 data sheet and make sure that you fully
+understand the meaning of these parameters before you attempt to change them.
diff --git a/Documentation/hwmon/max6697.rst b/Documentation/hwmon/max6697.rst
new file mode 100644
index 000000000..ffc5a7d8d
--- /dev/null
+++ b/Documentation/hwmon/max6697.rst
@@ -0,0 +1,91 @@
+Kernel driver max6697
+=====================
+
+Supported chips:
+
+ * Maxim MAX6581
+
+ Prefix: 'max6581'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6581.pdf
+
+ * Maxim MAX6602
+
+ Prefix: 'max6602'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6602.pdf
+
+ * Maxim MAX6622
+
+ Prefix: 'max6622'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6622.pdf
+
+ * Maxim MAX6636
+
+ Prefix: 'max6636'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6636.pdf
+
+ * Maxim MAX6689
+
+ Prefix: 'max6689'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6689.pdf
+
+ * Maxim MAX6693
+
+ Prefix: 'max6693'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6693.pdf
+
+ * Maxim MAX6694
+
+ Prefix: 'max6694'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6694.pdf
+
+ * Maxim MAX6697
+
+ Prefix: 'max6697'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6697.pdf
+
+ * Maxim MAX6698
+
+ Prefix: 'max6698'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6698.pdf
+
+ * Maxim MAX6699
+
+ Prefix: 'max6699'
+
+ Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6699.pdf
+
+Author:
+
+ Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for several MAX6697 compatible temperature sensor
+chips. The chips support one local temperature sensor plus four, six, or seven
+remote temperature sensors. Remote temperature sensors are diode-connected
+thermal transitors, except for MAX6698 which supports three diode-connected
+thermal transistors plus three thermistors in addition to the local temperature
+sensor.
+
+The driver provides the following sysfs attributes. temp1 is the local (chip)
+temperature, temp[2..n] are remote temperatures. The actually supported
+per-channel attributes are chip type and channel dependent.
+
+================ == ==========================================================
+tempX_input RO temperature
+tempX_max RW temperature maximum threshold
+tempX_max_alarm RO temperature maximum threshold alarm
+tempX_crit RW temperature critical threshold
+tempX_crit_alarm RO temperature critical threshold alarm
+tempX_fault RO temperature diode fault (remote sensors only)
+================ == ==========================================================
diff --git a/Documentation/hwmon/max8688.rst b/Documentation/hwmon/max8688.rst
new file mode 100644
index 000000000..71e7f2cbe
--- /dev/null
+++ b/Documentation/hwmon/max8688.rst
@@ -0,0 +1,85 @@
+Kernel driver max8688
+=====================
+
+Supported chips:
+
+ * Maxim MAX8688
+
+ Prefix: 'max8688'
+
+ Addresses scanned: -
+
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Maxim MAX8688 Digital Power-Supply
+Controller/Monitor with PMBus Interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+in1_label "vout1"
+in1_input Measured voltage. From READ_VOUT register.
+in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
+in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
+ register.
+in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
+ status.
+in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
+ status.
+in1_highest Historical maximum voltage.
+in1_reset_history Write any value to reset history.
+
+curr1_label "iout1"
+curr1_input Measured current. From READ_IOUT register.
+curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
+ register.
+curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register.
+curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+curr1_highest Historical maximum current.
+curr1_reset_history Write any value to reset history.
+
+temp1_input Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm Chip temperature high alarm. Set by comparing
+ READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+ status is set.
+temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
+ READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+ status is set.
+temp1_highest Historical maximum temperature.
+temp1_reset_history Write any value to reset history.
+======================= ========================================================
diff --git a/Documentation/hwmon/mc13783-adc.rst b/Documentation/hwmon/mc13783-adc.rst
new file mode 100644
index 000000000..cae70350b
--- /dev/null
+++ b/Documentation/hwmon/mc13783-adc.rst
@@ -0,0 +1,89 @@
+Kernel driver mc13783-adc
+=========================
+
+Supported chips:
+
+ * Freescale MC13783
+
+ Prefix: 'mc13783'
+
+ Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13783.pdf
+
+ * Freescale MC13892
+
+ Prefix: 'mc13892'
+
+ Datasheet: https://www.nxp.com/docs/en/data-sheet/MC13892.pdf
+
+
+
+Authors:
+
+ - Sascha Hauer <s.hauer@pengutronix.de>
+ - Luotao Fu <l.fu@pengutronix.de>
+
+Description
+-----------
+
+The Freescale MC13783 and MC13892 are Power Management and Audio Circuits.
+Among other things they contain a 10-bit A/D converter. The converter has 16
+(MC13783) resp. 12 (MC13892) channels which can be used in different modes. The
+A/D converter has a resolution of 2.25mV.
+
+Some channels can be used as General Purpose inputs or in a dedicated mode with
+a chip internal scaling applied .
+
+Currently the driver only supports the Application Supply channel (BP / BPSNS),
+the General Purpose inputs and touchscreen.
+
+See the following tables for the meaning of the different channels and their
+chip internal scaling:
+
+- MC13783:
+
+======= =============================================== =============== =======
+Channel Signal Input Range Scaling
+======= =============================================== =============== =======
+0 Battery Voltage (BATT) 2.50 - 4.65V -2.40V
+1 Battery Current (BATT - BATTISNS) -50 - 50 mV x20
+2 Application Supply (BP) 2.50 - 4.65V -2.40V
+3 Charger Voltage (CHRGRAW) 0 - 10V / /5
+ 0 - 20V /10
+4 Charger Current (CHRGISNSP-CHRGISNSN) -0.25 - 0.25V x4
+5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.30V No
+6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.30V / No /
+ 1.50 - 3.50V -1.20V
+7 General Purpose ADIN7 / UID / Die Temperature 0 - 2.30V / No /
+ 0 - 2.55V / x0.9 / No
+8 General Purpose ADIN8 0 - 2.30V No
+9 General Purpose ADIN9 0 - 2.30V No
+10 General Purpose ADIN10 0 - 2.30V No
+11 General Purpose ADIN11 0 - 2.30V No
+12 General Purpose TSX1 / Touchscreen X-plate 1 0 - 2.30V No
+13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.30V No
+14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.30V No
+15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.30V No
+======= =============================================== =============== =======
+
+- MC13892:
+
+======= =============================================== =============== =======
+Channel Signal Input Range Scaling
+======= =============================================== =============== =======
+0 Battery Voltage (BATT) 0 - 4.8V /2
+1 Battery Current (BATT - BATTISNSCC) -60 - 60 mV x20
+2 Application Supply (BPSNS) 0 - 4.8V /2
+3 Charger Voltage (CHRGRAW) 0 - 12V / /5
+ 0 - 20V /10
+4 Charger Current (CHRGISNS-BPSNS) / -0.3 - 0.3V / x4 /
+ Touchscreen X-plate 1 0 - 2.4V No
+5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.4V No
+6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.4V / No
+ Backup Voltage (LICELL) 0 - 3.6V x2/3
+7 General Purpose ADIN7 / UID / Die Temperature 0 - 2.4V / No /
+ 0 - 4.8V /2
+12 General Purpose TSX1 / Touchscreen X-plate 1 0 - 2.4V No
+13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.4V No
+14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.4V No
+15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.4V No
+======= =============================================== =============== =======
diff --git a/Documentation/hwmon/mcp3021.rst b/Documentation/hwmon/mcp3021.rst
new file mode 100644
index 000000000..83f4bda2f
--- /dev/null
+++ b/Documentation/hwmon/mcp3021.rst
@@ -0,0 +1,38 @@
+Kernel driver MCP3021
+=====================
+
+Supported chips:
+
+ * Microchip Technology MCP3021
+
+ Prefix: 'mcp3021'
+
+ Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21805a.pdf
+
+ * Microchip Technology MCP3221
+
+ Prefix: 'mcp3221'
+
+ Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21732c.pdf
+
+
+
+Authors:
+
+ - Mingkai Hu
+ - Sven Schuchmann <schuchmann@schleissheimer.de>
+
+Description
+-----------
+
+This driver implements support for the Microchip Technology MCP3021 and
+MCP3221 chip.
+
+The Microchip Technology Inc. MCP3021 is a successive approximation A/D
+converter (ADC) with 10-bit resolution. The MCP3221 has 12-bit resolution.
+
+These devices provide one single-ended input with very low power consumption.
+Communication to the MCP3021/MCP3221 is performed using a 2-wire I2C
+compatible interface. Standard (100 kHz) and Fast (400 kHz) I2C modes are
+available. The default I2C device address is 0x4d (contact the Microchip
+factory for additional address options).
diff --git a/Documentation/hwmon/menf21bmc.rst b/Documentation/hwmon/menf21bmc.rst
new file mode 100644
index 000000000..978691d59
--- /dev/null
+++ b/Documentation/hwmon/menf21bmc.rst
@@ -0,0 +1,55 @@
+Kernel driver menf21bmc_hwmon
+=============================
+
+Supported chips:
+
+ * MEN 14F021P00
+
+ Prefix: 'menf21bmc_hwmon'
+
+ Adresses scanned: -
+
+Author: Andreas Werner <andreas.werner@men.de>
+
+Description
+-----------
+
+The menf21bmc is a Board Management Controller (BMC) which provides an I2C
+interface to the host to access the features implemented in the BMC.
+
+This driver gives access to the voltage monitoring feature of the main
+voltages of the board.
+The voltage sensors are connected to the ADC inputs of the BMC which is
+a PIC16F917 Mikrocontroller.
+
+Usage Notes
+-----------
+
+This driver is part of the MFD driver named "menf21bmc" and does
+not auto-detect devices.
+You will have to instantiate the MFD driver explicitly.
+Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported. All attributes are read only
+The Limits are read once by the driver.
+
+=============== ==========================
+in0_input +3.3V input voltage
+in1_input +5.0V input voltage
+in2_input +12.0V input voltage
+in3_input +5V Standby input voltage
+in4_input VBAT (on board battery)
+
+in[0-4]_min Minimum voltage limit
+in[0-4]_max Maximum voltage limit
+
+in0_label "MON_3_3V"
+in1_label "MON_5V"
+in2_label "MON_12V"
+in3_label "5V_STANDBY"
+in4_label "VBAT"
+=============== ==========================
diff --git a/Documentation/hwmon/mlxreg-fan.rst b/Documentation/hwmon/mlxreg-fan.rst
new file mode 100644
index 000000000..c92b8e885
--- /dev/null
+++ b/Documentation/hwmon/mlxreg-fan.rst
@@ -0,0 +1,70 @@
+Kernel driver mlxreg-fan
+========================
+
+Provides FAN control for the next Mellanox systems:
+
+- QMB700, equipped with 40x200GbE InfiniBand ports;
+- MSN3700, equipped with 32x200GbE or 16x400GbE Ethernet ports;
+- MSN3410, equipped with 6x400GbE plus 48x50GbE Ethernet ports;
+- MSN3800, equipped with 64x1000GbE Ethernet ports;
+
+Author: Vadim Pasternak <vadimp@mellanox.com>
+
+These are the Top of the Rack systems, equipped with Mellanox switch
+board with Mellanox Quantum or Spectrume-2 devices.
+FAN controller is implemented by the programmable device logic.
+
+The default registers offsets set within the programmable device is as
+following:
+
+======================= ====
+pwm1 0xe3
+fan1 (tacho1) 0xe4
+fan2 (tacho2) 0xe5
+fan3 (tacho3) 0xe6
+fan4 (tacho4) 0xe7
+fan5 (tacho5) 0xe8
+fan6 (tacho6) 0xe9
+fan7 (tacho7) 0xea
+fan8 (tacho8) 0xeb
+fan9 (tacho9) 0xec
+fan10 (tacho10) 0xed
+fan11 (tacho11) 0xee
+fan12 (tacho12) 0xef
+======================= ====
+
+This setup can be re-programmed with other registers.
+
+Description
+-----------
+
+The driver implements a simple interface for driving a fan connected to
+a PWM output and tachometer inputs.
+This driver obtains PWM and tachometers registers location according to
+the system configuration and creates FAN/PWM hwmon objects and a cooling
+device. PWM and tachometers are sensed through the on-board programmable
+device, which exports its register map. This device could be attached to
+any bus type, for which register mapping is supported.
+Single instance is created with one PWM control, up to 12 tachometers and
+one cooling device. It could be as many instances as programmable device
+supports.
+The driver exposes the fan to the user space through the hwmon's and
+thermal's sysfs interfaces.
+
+/sys files in hwmon subsystem
+-----------------------------
+
+================= == ===================================================
+fan[1-12]_fault RO files for tachometers TACH1-TACH12 fault indication
+fan[1-12]_input RO files for tachometers TACH1-TACH12 input (in RPM)
+pwm1 RW file for fan[1-12] target duty cycle (0..255)
+================= == ===================================================
+
+/sys files in thermal subsystem
+-------------------------------
+
+================= == ====================================================
+cur_state RW file for current cooling state of the cooling device
+ (0..max_state)
+max_state RO file for maximum cooling state of the cooling device
+================= == ====================================================
diff --git a/Documentation/hwmon/mp2888.rst b/Documentation/hwmon/mp2888.rst
new file mode 100644
index 000000000..5e578fd7b
--- /dev/null
+++ b/Documentation/hwmon/mp2888.rst
@@ -0,0 +1,113 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp2888
+====================
+
+Supported chips:
+
+ * MPS MP12254
+
+ Prefix: 'mp2888'
+
+Author:
+
+ Vadim Pasternak <vadimp@nvidia.com>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+vendor dual-loop, digital, multi-phase controller MP2888.
+
+This device: supports:
+
+- One power rail.
+- Programmable Multi-Phase up to 10 Phases.
+- PWM-VID Interface
+- One pages 0 for telemetry.
+- Programmable pins for PMBus Address.
+- Built-In EEPROM to Store Custom Configurations.
+
+Device complaint with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct format for reading output current, output voltage,
+input and output power and temperature.
+Device supports linear format for reading input voltage and input power.
+
+The driver provides the next attributes for the current:
+
+- for current out input and maximum alarm;
+- for phase current: input and label.
+
+The driver exports the following attributes via the 'sysfs' files, where:
+
+- 'n' is number of configured phases (from 1 to 10);
+- index 1 for "iout";
+- indexes 2 ... 1 + n for phases.
+
+**curr[1-{1+n}]_input**
+
+**curr[1-{1+n}]_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+The driver provides the next attributes for the voltage:
+
+- for voltage in: input, low and high critical thresholds, low and high
+ critical alarms;
+- for voltage out: input and high alarm;
+
+The driver exports the following attributes via the 'sysfs' files, where
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+**in1_input**
+
+**in1_label**
+
+**in1_min**
+
+**in1_min_alarm**
+
+**in2_alarm**
+
+**in2_input**
+
+**in2_label**
+
+The driver provides the next attributes for the power:
+
+- for power in alarm and input.
+- for power out: cap, cap alarm an input.
+
+The driver exports the following attributes via the 'sysfs' files, where
+- indexes 1 for "pin";
+- indexes 2 for "pout";
+
+**power1_alarm**
+
+**power1_input**
+
+**power1_label**
+
+**power2_input**
+
+**power2_label**
+
+**power2_max**
+
+**power2_max_alarm**
+
+The driver provides the next attributes for the temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
diff --git a/Documentation/hwmon/mp2975.rst b/Documentation/hwmon/mp2975.rst
new file mode 100644
index 000000000..81d816b71
--- /dev/null
+++ b/Documentation/hwmon/mp2975.rst
@@ -0,0 +1,128 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp2975
+====================
+
+Supported chips:
+
+ * MPS MP12254
+
+ Prefix: 'mp2975'
+
+Author:
+
+ Vadim Pasternak <vadimp@nvidia.com>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+vendor dual-loop, digital, multi-phase controller MP2975.
+
+This device:
+
+- Supports up to two power rail.
+- Provides 8 pulse-width modulations (PWMs), and can be configured up
+ to 8-phase operation for rail 1 and up to 4-phase operation for rail
+ 2.
+- Supports two pages 0 and 1 for telemetry and also pages 2 and 3 for
+ configuration.
+- Can configured VOUT readout in direct or VID format and allows
+ setting of different formats on rails 1 and 2. For VID the following
+ protocols are available: VR13 mode with 5-mV DAC; VR13 mode with
+ 10-mV DAC, IMVP9 mode with 5-mV DAC.
+
+Device supports:
+
+- SVID interface.
+- AVSBus interface.
+
+Device complaint with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct format for reading output current, output voltage,
+input and output power and temperature.
+Device supports linear format for reading input voltage and input power.
+Device supports VID and direct formats for reading output voltage.
+The below VID modes are supported: VR12, VR13, IMVP9.
+
+The driver provides the next attributes for the current:
+
+- for current in: input, maximum alarm;
+- for current out input, maximum alarm and highest values;
+- for phase current: input and label.
+ attributes.
+
+The driver exports the following attributes via the 'sysfs' files, where
+
+- 'n' is number of telemetry pages (from 1 to 2);
+- 'k' is number of configured phases (from 1 to 8);
+- indexes 1, 1*n for "iin";
+- indexes n+1, n+2 for "iout";
+- indexes 2*n+1 ... 2*n + k for phases.
+
+**curr[1-{2n}]_alarm**
+
+**curr[{n+1}-{n+2}]_highest**
+
+**curr[1-{2n+k}]_input**
+
+**curr[1-{2n+k}]_label**
+
+The driver provides the next attributes for the voltage:
+
+- for voltage in: input, high critical threshold, high critical alarm, all only
+ from page 0;
+- for voltage out: input, low and high critical thresholds, low and high
+ critical alarms, from pages 0 and 1;
+
+The driver exports the following attributes via the 'sysfs' files, where
+
+- 'n' is number of telemetry pages (from 1 to 2);
+- indexes 1 for "iin";
+- indexes n+1, n+2 for "vout";
+
+**in[1-{2n+1}]_crit**
+
+**in[1-{2n+1}]_crit_alarm**
+
+**in[1-{2n+1}]_input**
+
+**in[1-{2n+1}]_label**
+
+**in[2-{n+1}]_lcrit**
+
+**in[2-{n+1}1_lcrit_alarm**
+
+The driver provides the next attributes for the power:
+
+- for power in alarm and input.
+- for power out: highest and input.
+
+The driver exports the following attributes via the 'sysfs' files, where
+
+- 'n' is number of telemetry pages (from 1 to 2);
+- indexes 1 for "pin";
+- indexes n+1, n+2 for "pout";
+
+**power1_alarm**
+
+**power[2-{n+1}]_highest**
+
+**power[1-{2n+1}]_input**
+
+**power[1-{2n+1}]_label**
+
+The driver provides the next attributes for the temperature (only from page 0):
+
+
+**temp1_crit**
+
+**temp1_crit_alarm**
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
diff --git a/Documentation/hwmon/mp5023.rst b/Documentation/hwmon/mp5023.rst
new file mode 100644
index 000000000..af5ab1345
--- /dev/null
+++ b/Documentation/hwmon/mp5023.rst
@@ -0,0 +1,84 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp5023
+====================
+
+Supported chips:
+
+ * MPS MP5023
+
+ Prefix: 'mp5023'
+
+ * Datasheet
+
+ Publicly available at the MPS website : https://www.monolithicpower.com/en/mp5023.html
+
+Author:
+
+ Howard Chiu <howard.chiu@quantatw.com>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+MP5023 Hot-Swap Controller.
+
+Device complaint with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct format for reading input voltage, output voltage,
+output current, input power and temperature.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_alarm**
+
+**curr1_max**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+**power1_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
diff --git a/Documentation/hwmon/nct6683.rst b/Documentation/hwmon/nct6683.rst
new file mode 100644
index 000000000..2e1408d17
--- /dev/null
+++ b/Documentation/hwmon/nct6683.rst
@@ -0,0 +1,66 @@
+Kernel driver nct6683
+=====================
+
+Supported chips:
+
+ * Nuvoton NCT6683D/NCT6687D
+
+ Prefix: 'nct6683'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+Authors:
+
+ Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for the Nuvoton NCT6683D eSIO chip.
+
+The chips implement up to shared 32 temperature and voltage sensors.
+It supports up to 16 fan rotation sensors and up to 8 fan control engines.
+
+Temperatures are measured in degrees Celsius. Measurement resolution is
+0.5 degrees C.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+
+Fan rotation speeds are reported in RPM (rotations per minute).
+
+Usage Note
+----------
+
+Limit register locations on Intel boards with EC firmware version 1.0
+build date 04/03/13 do not match the register locations in the Nuvoton
+datasheet. Nuvoton confirms that Intel uses a special firmware version
+with different register addresses. The specification describing the Intel
+firmware is held under NDA by Nuvoton and Intel and not available
+to the public.
+
+Some of the register locations can be reverse engineered; others are too
+well hidden. Given this, writing any values from the operating system is
+considered too risky with this firmware and has been disabled. All limits
+must all be written from the BIOS.
+
+The driver has only been tested with the Intel firmware, and by default
+only instantiates on Intel boards. To enable it on non-Intel boards,
+set the 'force' module parameter to 1.
+
+Tested Boards and Firmware Versions
+-----------------------------------
+
+The driver has been reported to work with the following boards and
+firmware versions.
+
+=============== ===============================================
+Board Firmware version
+=============== ===============================================
+Intel DH87RL NCT6683D EC firmware version 1.0 build 04/03/13
+Intel DH87MC NCT6683D EC firmware version 1.0 build 04/03/13
+Intel DB85FL NCT6683D EC firmware version 1.0 build 04/03/13
+ASRock X570 NCT6683D EC firmware version 1.0 build 06/28/19
+MSI B550 NCT6687D EC firmware version 1.0 build 05/07/20
+=============== ===============================================
diff --git a/Documentation/hwmon/nct6775.rst b/Documentation/hwmon/nct6775.rst
new file mode 100644
index 000000000..5ba8276aa
--- /dev/null
+++ b/Documentation/hwmon/nct6775.rst
@@ -0,0 +1,280 @@
+Kernel driver NCT6775
+=====================
+
+.. note::
+
+ This driver supersedes the NCT6775F and NCT6776F support in the W83627EHF
+ driver.
+
+Supported chips:
+
+ * Nuvoton NCT6102D/NCT6104D/NCT6106D
+
+ Prefix: 'nct6106'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from the Nuvoton web site
+
+ * Nuvoton NCT5572D/NCT6771F/NCT6772F/NCT6775F/W83677HG-I
+
+ Prefix: 'nct6775'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+ * Nuvoton NCT5573D/NCT5577D/NCT6776D/NCT6776F
+
+ Prefix: 'nct6776'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+ * Nuvoton NCT5532D/NCT6779D
+
+ Prefix: 'nct6779'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+ * Nuvoton NCT6791D
+
+ Prefix: 'nct6791'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+ * Nuvoton NCT6792D
+
+ Prefix: 'nct6792'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+ * Nuvoton NCT6793D
+
+ Prefix: 'nct6793'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+ * Nuvoton NCT6795D
+
+ Prefix: 'nct6795'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+ * Nuvoton NCT6796D
+
+ Prefix: 'nct6796'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+
+
+Authors:
+
+ Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for the Nuvoton NCT6775F, NCT6776F, and NCT6779D
+and compatible super I/O chips.
+
+The chips support up to 25 temperature monitoring sources. Up to 6 of those are
+direct temperature sensor inputs, the others are special sources such as PECI,
+PCH, and SMBUS. Depending on the chip type, 2 to 6 of the temperature sources
+can be monitored and compared against minimum, maximum, and critical
+temperatures. The driver reports up to 10 of the temperatures to the user.
+There are 4 to 5 fan rotation speed sensors, 8 to 15 analog voltage sensors,
+one VID, alarms with beep warnings (control unimplemented), and some automatic
+fan regulation strategies (plus manual fan control mode).
+
+The temperature sensor sources on all chips are configurable. The configured
+source for each of the temperature sensors is provided in tempX_label.
+
+Temperatures are measured in degrees Celsius and measurement resolution is
+either 1 degC or 0.5 degC, depending on the temperature source and
+configuration. An alarm is triggered when the temperature gets higher than
+the high limit; it stays on until the temperature falls below the hysteresis
+value. Alarms are only supported for temp1 to temp6, depending on the chip type.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. On
+NCT6775F, fan readings can be divided by a programmable divider (1, 2, 4, 8,
+16, 32, 64 or 128) to give the readings more range or accuracy; the other chips
+do not have a fan speed divider. The driver sets the most suitable fan divisor
+itself; specifically, it increases the divider value each time a fan speed
+reading returns an invalid value, and it reduces it if the fan speed reading
+is lower than optimal. Some fans might not be present because they share pins
+with other functions.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+The driver supports automatic fan control mode known as Thermal Cruise.
+In this mode, the chip attempts to keep the measured temperature in a
+predefined temperature range. If the temperature goes out of range, fan
+is driven slower/faster to reach the predefined range again.
+
+The mode works for fan1-fan5.
+
+sysfs attributes
+----------------
+
+pwm[1-7]
+ - this file stores PWM duty cycle or DC value (fan speed) in range:
+
+ 0 (lowest speed) to 255 (full)
+
+pwm[1-7]_enable
+ - this file controls mode of fan/temperature control:
+
+ * 0 Fan control disabled (fans set to maximum speed)
+ * 1 Manual mode, write to pwm[0-5] any value 0-255
+ * 2 "Thermal Cruise" mode
+ * 3 "Fan Speed Cruise" mode
+ * 4 "Smart Fan III" mode (NCT6775F only)
+ * 5 "Smart Fan IV" mode
+
+pwm[1-7]_mode
+ - controls if output is PWM or DC level
+
+ * 0 DC output
+ * 1 PWM output
+
+Common fan control attributes
+-----------------------------
+
+pwm[1-7]_temp_sel
+ Temperature source. Value is temperature sensor index.
+ For example, select '1' for temp1_input.
+
+pwm[1-7]_weight_temp_sel
+ Secondary temperature source. Value is temperature
+ sensor index. For example, select '1' for temp1_input.
+ Set to 0 to disable secondary temperature control.
+
+If secondary temperature functionality is enabled, it is controlled with the
+following attributes.
+
+pwm[1-7]_weight_duty_step
+ Duty step size.
+
+pwm[1-7]_weight_temp_step
+ Temperature step size. With each step over
+ temp_step_base, the value of weight_duty_step is added
+ to the current pwm value.
+
+pwm[1-7]_weight_temp_step_base
+ Temperature at which secondary temperature control kicks
+ in.
+
+pwm[1-7]_weight_temp_step_tol
+ Temperature step tolerance.
+
+Thermal Cruise mode (2)
+-----------------------
+
+If the temperature is in the range defined by:
+
+pwm[1-7]_target_temp
+ Target temperature, unit millidegree Celsius
+ (range 0 - 127000)
+
+pwm[1-7]_temp_tolerance
+ Target temperature tolerance, unit millidegree Celsius
+
+There are no changes to fan speed. Once the temperature leaves the interval, fan
+speed increases (if temperature is higher that desired) or decreases (if
+temperature is lower than desired), using the following limits and time
+intervals.
+
+pwm[1-7]_start
+ fan pwm start value (range 1 - 255), to start fan
+ when the temperature is above defined range.
+
+pwm[1-7]_floor
+ lowest fan pwm (range 0 - 255) if temperature is below
+ the defined range. If set to 0, the fan is expected to
+ stop if the temperature is below the defined range.
+
+pwm[1-7]_step_up_time
+ milliseconds before fan speed is increased
+
+pwm[1-7]_step_down_time
+ milliseconds before fan speed is decreased
+
+pwm[1-7]_stop_time
+ how many milliseconds must elapse to switch
+ corresponding fan off (when the temperature was below
+ defined range).
+
+Speed Cruise mode (3)
+---------------------
+
+This modes tries to keep the fan speed constant.
+
+fan[1-7]_target
+ Target fan speed
+
+fan[1-7]_tolerance
+ Target speed tolerance
+
+
+Untested; use at your own risk.
+
+Smart Fan IV mode (5)
+---------------------
+
+This mode offers multiple slopes to control the fan speed. The slopes can be
+controlled by setting the pwm and temperature attributes. When the temperature
+rises, the chip will calculate the DC/PWM output based on the current slope.
+There are up to seven data points depending on the chip type. Subsequent data
+points should be set to higher temperatures and higher pwm values to achieve
+higher fan speeds with increasing temperature. The last data point reflects
+critical temperature mode, in which the fans should run at full speed.
+
+pwm[1-7]_auto_point[1-7]_pwm
+ pwm value to be set if temperature reaches matching
+ temperature range.
+
+pwm[1-7]_auto_point[1-7]_temp
+ Temperature over which the matching pwm is enabled.
+
+pwm[1-7]_temp_tolerance
+ Temperature tolerance, unit millidegree Celsius
+
+pwm[1-7]_crit_temp_tolerance
+ Temperature tolerance for critical temperature,
+ unit millidegree Celsius
+
+pwm[1-7]_step_up_time
+ milliseconds before fan speed is increased
+
+pwm[1-7]_step_down_time
+ milliseconds before fan speed is decreased
+
+Usage Notes
+-----------
+
+On various ASUS boards with NCT6776F, it appears that CPUTIN is not really
+connected to anything and floats, or that it is connected to some non-standard
+temperature measurement device. As a result, the temperature reported on CPUTIN
+will not reflect a usable value. It often reports unreasonably high
+temperatures, and in some cases the reported temperature declines if the actual
+temperature increases (similar to the raw PECI temperature value - see PECI
+specification for details). CPUTIN should therefore be ignored on ASUS
+boards. The CPU temperature on ASUS boards is reported from PECI 0.
diff --git a/Documentation/hwmon/nct7802.rst b/Documentation/hwmon/nct7802.rst
new file mode 100644
index 000000000..8b7365a7c
--- /dev/null
+++ b/Documentation/hwmon/nct7802.rst
@@ -0,0 +1,38 @@
+Kernel driver nct7802
+=====================
+
+Supported chips:
+
+ * Nuvoton NCT7802Y
+
+ Prefix: 'nct7802'
+
+ Addresses scanned: I2C 0x28..0x2f
+
+ Datasheet: Available from Nuvoton web site
+
+Authors:
+
+ Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for the Nuvoton NCT7802Y hardware monitoring
+chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
+speed sensors.
+
+Smart Fanâ„¢ speed control is available via pwmX_auto_point attributes.
+
+Tested Boards and BIOS Versions
+-------------------------------
+
+The driver has been reported to work with the following boards and
+BIOS versions.
+
+======================= ===============================================
+Board BIOS version
+======================= ===============================================
+Kontron COMe-bSC2 CHR2E934.001.GGO
+Kontron COMe-bIP2 CCR2E212
+======================= ===============================================
diff --git a/Documentation/hwmon/nct7904.rst b/Documentation/hwmon/nct7904.rst
new file mode 100644
index 000000000..5b2f11158
--- /dev/null
+++ b/Documentation/hwmon/nct7904.rst
@@ -0,0 +1,67 @@
+Kernel driver nct7904
+=====================
+
+Supported chip:
+
+ * Nuvoton NCT7904D
+
+ Prefix: nct7904
+
+ Addresses: I2C 0x2d, 0x2e
+
+ Datasheet: Publicly available at Nuvoton website
+
+ http://www.nuvoton.com/
+
+Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
+
+
+Description
+-----------
+
+The NCT7904D is a hardware monitor supporting up to 20 voltage sensors,
+internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature
+interface, up to 12 fan tachometer inputs, up to 4 fan control channels
+with SmartFan.
+
+
+Sysfs entries
+-------------
+
+Currently, the driver supports only the following features:
+
+======================= =======================================================
+in[1-20]_input Input voltage measurements (mV)
+
+fan[1-12]_input Fan tachometer measurements (rpm)
+
+temp1_input Local temperature (1/1000 degree,
+ 0.125 degree resolution)
+
+temp[2-9]_input CPU temperatures (1/1000 degree,
+ 0.125 degree resolution)
+
+pwm[1-4]_enable R/W, 1/2 for manual or SmartFan mode
+ Setting SmartFan mode is supported only if it has been
+ previously configured by BIOS (or configuration EEPROM)
+
+pwm[1-4] R/O in SmartFan mode, R/W in manual control mode
+======================= =======================================================
+
+The driver checks sensor control registers and does not export the sensors
+that are not enabled. Anyway, a sensor that is enabled may actually be not
+connected and thus provide zero readings.
+
+
+Limitations
+-----------
+
+The following features are not supported in current version:
+
+ - SmartFan control
+ - Watchdog
+ - GPIO
+ - external temperature sensors
+ - SMI
+ - min/max values
+ - many other...
diff --git a/Documentation/hwmon/npcm750-pwm-fan.rst b/Documentation/hwmon/npcm750-pwm-fan.rst
new file mode 100644
index 000000000..c67af08b6
--- /dev/null
+++ b/Documentation/hwmon/npcm750-pwm-fan.rst
@@ -0,0 +1,26 @@
+Kernel driver npcm750-pwm-fan
+=============================
+
+Supported chips:
+
+ NUVOTON NPCM750/730/715/705
+
+Authors:
+
+ <tomer.maimon@nuvoton.com>
+
+Description:
+------------
+This driver implements support for NUVOTON NPCM7XX PWM and Fan Tacho
+controller. The PWM controller supports up to 8 PWM outputs. The Fan tacho
+controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+=============== ======= =====================================================
+fanX_input ro provide current fan rotation value in RPM as reported
+ by the fan to the device.
+
+pwmX rw get or set PWM fan control value. This is an integer
+ value between 0(off) and 255(full speed).
+=============== ======= =====================================================
diff --git a/Documentation/hwmon/nsa320.rst b/Documentation/hwmon/nsa320.rst
new file mode 100644
index 000000000..4fe75fd2f
--- /dev/null
+++ b/Documentation/hwmon/nsa320.rst
@@ -0,0 +1,64 @@
+Kernel driver nsa320_hwmon
+==========================
+
+Supported chips:
+
+ * Holtek HT46R065 microcontroller with onboard firmware that configures
+
+ it to act as a hardware monitor.
+
+ Prefix: 'nsa320'
+
+ Addresses scanned: none
+
+ Datasheet: Not available, driver was reverse engineered based upon the
+
+ Zyxel kernel source
+
+
+
+Author:
+
+ Adam Baker <linux@baker-net.org.uk>
+
+Description
+-----------
+
+This chip is known to be used in the Zyxel NSA320 and NSA325 NAS Units and
+also in some variants of the NSA310 but the driver has only been tested
+on the NSA320. In all of these devices it is connected to the same 3 GPIO
+lines which are used to provide chip select, clock and data lines. The
+interface behaves similarly to SPI but at much lower speeds than are normally
+used for SPI.
+
+Following each chip select pulse the chip will generate a single 32 bit word
+that contains 0x55 as a marker to indicate that data is being read correctly,
+followed by an 8 bit fan speed in 100s of RPM and a 16 bit temperature in
+tenths of a degree.
+
+
+sysfs-Interface
+---------------
+
+============= =================
+temp1_input temperature input
+fan1_input fan speed
+============= =================
+
+Notes
+-----
+
+The access timings used in the driver are the same as used in the Zyxel
+provided kernel. Testing has shown that if the delay between chip select and
+the first clock pulse is reduced from 100 ms to just under 10ms then the chip
+will not produce any output. If the duration of either phase of the clock
+is reduced from 100 us to less than 15 us then data pulses are likely to be
+read twice corrupting the output. The above analysis is based upon a sample
+of one unit but suggests that the Zyxel provided delay values include a
+reasonable tolerance.
+
+The driver incorporates a limit that it will not check for updated values
+faster than once a second. This is because the hardware takes a relatively long
+time to read the data from the device and when it does it reads both temp and
+fan speed. As the most likely case for two accesses in quick succession is
+to read both of these values avoiding a second read delay is desirable.
diff --git a/Documentation/hwmon/ntc_thermistor.rst b/Documentation/hwmon/ntc_thermistor.rst
new file mode 100644
index 000000000..d0e7f9172
--- /dev/null
+++ b/Documentation/hwmon/ntc_thermistor.rst
@@ -0,0 +1,111 @@
+Kernel driver ntc_thermistor
+============================
+
+Supported thermistors from Murata:
+
+* Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473,
+ NCP15WL333, NCP03WF104, NCP15XH103
+
+ Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473',
+ 'ncp15wl333', 'ncp03wf104', 'ncp15xh103'
+
+ Datasheet: Publicly available at Murata
+
+Supported thermistors from EPCOS:
+
+* EPCOS NTC Thermistors B57330V2103
+
+ Prefixes: b57330v2103
+
+ Datasheet: Publicly available at EPCOS
+
+Other NTC thermistors can be supported simply by adding compensation
+tables; e.g., NCP15WL333 support is added by the table ncpXXwl333.
+
+Authors:
+
+ MyungJoo Ham <myungjoo.ham@samsung.com>
+
+Description
+-----------
+
+The NTC (Negative Temperature Coefficient) thermistor is a simple thermistor
+that requires users to provide the resistance and lookup the corresponding
+compensation table to get the temperature input.
+
+The NTC driver provides lookup tables with a linear approximation function
+and four circuit models with an option not to use any of the four models.
+
+Using the following convention::
+
+ $ resistor
+ [TH] the thermistor
+
+The four circuit models provided are:
+
+1. connect = NTC_CONNECTED_POSITIVE, pullup_ohm > 0::
+
+ [pullup_uV]
+ | |
+ [TH] $ (pullup_ohm)
+ | |
+ +----+-----------------------[read_uV]
+ |
+ $ (pulldown_ohm)
+ |
+ -+- (ground)
+
+2. connect = NTC_CONNECTED_POSITIVE, pullup_ohm = 0 (not-connected)::
+
+ [pullup_uV]
+ |
+ [TH]
+ |
+ +----------------------------[read_uV]
+ |
+ $ (pulldown_ohm)
+ |
+ -+- (ground)
+
+3. connect = NTC_CONNECTED_GROUND, pulldown_ohm > 0::
+
+ [pullup_uV]
+ |
+ $ (pullup_ohm)
+ |
+ +----+-----------------------[read_uV]
+ | |
+ [TH] $ (pulldown_ohm)
+ | |
+ -+----+- (ground)
+
+4. connect = NTC_CONNECTED_GROUND, pulldown_ohm = 0 (not-connected)::
+
+ [pullup_uV]
+ |
+ $ (pullup_ohm)
+ |
+ +----------------------------[read_uV]
+ |
+ [TH]
+ |
+ -+- (ground)
+
+When one of the four circuit models is used, read_uV, pullup_uV, pullup_ohm,
+pulldown_ohm, and connect should be provided. When none of the four models
+are suitable or the user can get the resistance directly, the user should
+provide read_ohm and _not_ provide the others.
+
+Sysfs Interface
+---------------
+
+=============== == =============================================================
+name the mandatory global attribute, the thermistor name.
+=============== == =============================================================
+temp1_type RO always 4 (thermistor)
+
+temp1_input RO measure the temperature and provide the measured value.
+ (reading this file initiates the reading procedure.)
+=============== == =============================================================
+
+Note that each NTC thermistor has only _one_ thermistor; thus, only temp1 exists.
diff --git a/Documentation/hwmon/nzxt-kraken2.rst b/Documentation/hwmon/nzxt-kraken2.rst
new file mode 100644
index 000000000..94025de65
--- /dev/null
+++ b/Documentation/hwmon/nzxt-kraken2.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-kraken2
+==========================
+
+Supported devices:
+
+* NZXT Kraken X42
+* NZXT Kraken X52
+* NZXT Kraken X62
+* NZXT Kraken X72
+
+Author: Jonas Malaco
+
+Description
+-----------
+
+This driver enables hardware monitoring support for NZXT Kraken X42/X52/X62/X72
+all-in-one CPU liquid coolers. Three sensors are available: fan speed, pump
+speed and coolant temperature.
+
+Fan and pump control, while supported by the firmware, are not currently
+exposed. The addressable RGB LEDs, present in the integrated CPU water block
+and pump head, are not supported either. But both features can be found in
+existing user-space tools (e.g. `liquidctl`_).
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Usage Notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Sysfs entries
+-------------
+
+======================= ========================================================
+fan1_input Fan speed (in rpm)
+fan2_input Pump speed (in rpm)
+temp1_input Coolant temperature (in millidegrees Celsius)
+======================= ========================================================
diff --git a/Documentation/hwmon/nzxt-smart2.rst b/Documentation/hwmon/nzxt-smart2.rst
new file mode 100644
index 000000000..d9d1b2742
--- /dev/null
+++ b/Documentation/hwmon/nzxt-smart2.rst
@@ -0,0 +1,62 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-smart2
+=========================
+
+Supported devices:
+
+- NZXT RGB & Fan controller
+- NZXT Smart Device v2
+
+Description
+-----------
+
+This driver implements monitoring and control of fans plugged into the device.
+Besides typical speed monitoring and PWM duty cycle control, voltage and current
+is reported for every fan.
+
+The device also has two connectors for RGB LEDs; support for them isn't
+implemented (mainly because there is no standardized sysfs interface).
+
+Also, the device has a noise sensor, but the sensor seems to be completely
+useless (and very imprecise), so support for it isn't implemented too.
+
+Usage Notes
+-----------
+
+The device should be autodetected, and the driver should load automatically.
+
+If fans are plugged in/unplugged while the system is powered on, the driver
+must be reloaded to detect configuration changes; otherwise, new fans can't
+be controlled (`pwm*` changes will be ignored). It is necessary because the
+device has a dedicated "detect fans" command, and currently, it is executed only
+during initialization. Speed, voltage, current monitoring will work even without
+reload. As an alternative to reloading the module, a userspace tool (like
+`liquidctl`_) can be used to run "detect fans" command through hidraw interface.
+
+The driver coexists with userspace tools that access the device through hidraw
+interface with no known issues.
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Sysfs entries
+-------------
+
+======================= ========================================================
+fan[1-3]_input Fan speed monitoring (in rpm).
+curr[1-3]_input Current supplied to the fan (in milliamperes).
+in[0-2]_input Voltage supplied to the fan (in millivolts).
+pwm[1-3] Controls fan speed: PWM duty cycle for PWM-controlled
+ fans, voltage for other fans. Voltage can be changed in
+ 9-12 V range, but the value of the sysfs attribute is
+ always in 0-255 range (1 = 9V, 255 = 12V). Setting the
+ attribute to 0 turns off the fan completely.
+pwm[1-3]_enable 1 if the fan can be controlled by writing to the
+ corresponding pwm* attribute, 0 otherwise. The device
+ can control only the fans it detected itself, so the
+ attribute is read-only.
+pwm[1-3]_mode Read-only, 1 for PWM-controlled fans, 0 for other fans
+ (or if no fan connected).
+update_interval The interval at which all inputs are updated (in
+ milliseconds). The default is 1000ms. Minimum is 250ms.
+======================= ========================================================
diff --git a/Documentation/hwmon/occ.rst b/Documentation/hwmon/occ.rst
new file mode 100644
index 000000000..bf41c162d
--- /dev/null
+++ b/Documentation/hwmon/occ.rst
@@ -0,0 +1,153 @@
+Kernel driver occ-hwmon
+=======================
+
+Supported chips:
+
+ * POWER8
+ * POWER9
+
+Author: Eddie James <eajames@linux.ibm.com>
+
+Description
+-----------
+
+This driver supports hardware monitoring for the On-Chip Controller (OCC)
+embedded on POWER processors. The OCC is a device that collects and aggregates
+sensor data from the processor and the system. The OCC can provide the raw
+sensor data as well as perform thermal and power management on the system.
+
+The P8 version of this driver is a client driver of I2C. It may be probed
+manually if an "ibm,p8-occ-hwmon" compatible device is found under the
+appropriate I2C bus node in the device-tree.
+
+The P9 version of this driver is a client driver of the FSI-based OCC driver.
+It will be probed automatically by the FSI-based OCC driver.
+
+Sysfs entries
+-------------
+
+The following attributes are supported. All attributes are read-only unless
+specified.
+
+The OCC sensor ID is an integer that represents the unique identifier of the
+sensor with respect to the OCC. For example, a temperature sensor for the third
+DIMM slot in the system may have a sensor ID of 7. This mapping is unavailable
+to the device driver, which must therefore export the sensor ID as-is.
+
+Some entries are only present with certain OCC sensor versions or only on
+certain OCCs in the system. The version number is not exported to the user
+but can be inferred.
+
+temp[1-n]_label
+ OCC sensor ID.
+
+[with temperature sensor version 1]
+
+ temp[1-n]_input
+ Measured temperature of the component in millidegrees
+ Celsius.
+
+[with temperature sensor version >= 2]
+
+ temp[1-n]_type
+ The FRU (Field Replaceable Unit) type
+ (represented by an integer) for the component
+ that this sensor measures.
+ temp[1-n]_fault
+ Temperature sensor fault boolean; 1 to indicate
+ that a fault is present or 0 to indicate that
+ no fault is present.
+
+ [with type == 3 (FRU type is VRM)]
+
+ temp[1-n]_alarm
+ VRM temperature alarm boolean; 1 to indicate
+ alarm, 0 to indicate no alarm
+
+ [else]
+
+ temp[1-n]_input
+ Measured temperature of the component in
+ millidegrees Celsius.
+
+freq[1-n]_label
+ OCC sensor ID.
+freq[1-n]_input
+ Measured frequency of the component in MHz.
+power[1-n]_input
+ Latest measured power reading of the component in
+ microwatts.
+power[1-n]_average
+ Average power of the component in microwatts.
+power[1-n]_average_interval
+ The amount of time over which the power average
+ was taken in microseconds.
+
+[with power sensor version < 2]
+
+ power[1-n]_label
+ OCC sensor ID.
+
+[with power sensor version >= 2]
+
+ power[1-n]_label
+ OCC sensor ID + function ID + channel in the form
+ of a string, delimited by underscores, i.e. "0_15_1".
+ Both the function ID and channel are integers that
+ further identify the power sensor.
+
+[with power sensor version 0xa0]
+
+ power[1-n]_label
+ OCC sensor ID + sensor type in the form of a string,
+ delimited by an underscore, i.e. "0_system". Sensor
+ type will be one of "system", "proc", "vdd" or "vdn".
+ For this sensor version, OCC sensor ID will be the same
+ for all power sensors.
+
+[present only on "master" OCC; represents the whole system power; only one of
+this type of power sensor will be present]
+
+ power[1-n]_label
+ "system"
+ power[1-n]_input
+ Latest system output power in microwatts.
+ power[1-n]_cap
+ Current system power cap in microwatts.
+ power[1-n]_cap_not_redundant
+ System power cap in microwatts when
+ there is not redundant power.
+ power[1-n]_cap_max
+ Maximum power cap that the OCC can enforce in
+ microwatts.
+ power[1-n]_cap_min Minimum power cap that the OCC can enforce in
+ microwatts.
+ power[1-n]_cap_user The power cap set by the user, in microwatts.
+ This attribute will return 0 if no user power
+ cap has been set. This attribute is read-write,
+ but writing any precision below watts will be
+ ignored, i.e. requesting a power cap of
+ 500900000 microwatts will result in a power cap
+ request of 500 watts.
+
+ [with caps sensor version > 1]
+
+ power[1-n]_cap_user_source
+ Indicates how the user power cap was
+ set. This is an integer that maps to
+ system or firmware components that can
+ set the user power cap.
+
+The following "extn" sensors are exported as a way for the OCC to provide data
+that doesn't fit anywhere else. The meaning of these sensors is entirely
+dependent on their data, and cannot be statically defined.
+
+extn[1-n]_label
+ ASCII ID or OCC sensor ID.
+extn[1-n]_flags
+ This is one byte hexadecimal value. Bit 7 indicates the
+ type of the label attribute; 1 for sensor ID, 0 for
+ ASCII ID. Other bits are reserved.
+extn[1-n]_input
+ 6 bytes of hexadecimal data, with a meaning defined by
+ the sensor ID.
diff --git a/Documentation/hwmon/pc87360.rst b/Documentation/hwmon/pc87360.rst
new file mode 100644
index 000000000..4bad07bce
--- /dev/null
+++ b/Documentation/hwmon/pc87360.rst
@@ -0,0 +1,198 @@
+Kernel driver pc87360
+=====================
+
+Supported chips:
+
+ * National Semiconductor PC87360, PC87363, PC87364, PC87365 and PC87366
+
+ Prefixes: 'pc87360', 'pc87363', 'pc87364', 'pc87365', 'pc87366'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheets: No longer available
+
+Authors: Jean Delvare <jdelvare@suse.de>
+
+Thanks to Sandeep Mehta, Tonko de Rooy and Daniel Ceregatti for testing.
+
+Thanks to Rudolf Marek for helping me investigate conversion issues.
+
+
+Module Parameters
+-----------------
+
+* init int
+ Chip initialization level:
+
+ - 0: None
+ - **1**: Forcibly enable internal voltage and temperature channels,
+ except in9
+ - 2: Forcibly enable all voltage and temperature channels, except in9
+ - 3: Forcibly enable all voltage and temperature channels, including in9
+
+Note that this parameter has no effect for the PC87360, PC87363 and PC87364
+chips.
+
+Also note that for the PC87366, initialization levels 2 and 3 don't enable
+all temperature channels, because some of them share pins with each other,
+so they can't be used at the same time.
+
+
+Description
+-----------
+
+The National Semiconductor PC87360 Super I/O chip contains monitoring and
+PWM control circuitry for two fans. The PC87363 chip is similar, and the
+PC87364 chip has monitoring and PWM control for a third fan.
+
+The National Semiconductor PC87365 and PC87366 Super I/O chips are complete
+hardware monitoring chipsets, not only controlling and monitoring three fans,
+but also monitoring eleven voltage inputs and two (PC87365) or up to four
+(PC87366) temperatures.
+
+ =========== ======= ======= ======= ======= =====
+ Chip #vin #fan #pwm #temp devid
+ =========== ======= ======= ======= ======= =====
+ PC87360 - 2 2 - 0xE1
+ PC87363 - 2 2 - 0xE8
+ PC87364 - 3 3 - 0xE4
+ PC87365 11 3 3 2 0xE5
+ PC87366 11 3 3 3-4 0xE9
+ =========== ======= ======= ======= ======= =====
+
+The driver assumes that no more than one chip is present, and one of the
+standard Super I/O addresses is used (0x2E/0x2F or 0x4E/0x4F)
+
+Fan Monitoring
+--------------
+
+Fan rotation speeds are reported in RPM (revolutions per minute). An alarm
+is triggered if the rotation speed has dropped below a programmable limit.
+A different alarm is triggered if the fan speed is too low to be measured.
+
+Fan readings are affected by a programmable clock divider, giving the
+readings more range or accuracy. Usually, users have to learn how it works,
+but this driver implements dynamic clock divider selection, so you don't
+have to care no more.
+
+For reference, here are a few values about clock dividers:
+
+ =========== =============== =============== ===========
+ slowest accuracy highest
+ measurable around 3000 accurate
+ divider speed (RPM) RPM (RPM) speed (RPM)
+ =========== =============== =============== ===========
+ 1 1882 18 6928
+ 2 941 37 4898
+ 4 470 74 3464
+ 8 235 150 2449
+ =========== =============== =============== ===========
+
+For the curious, here is how the values above were computed:
+
+ * slowest measurable speed: clock/(255*divider)
+ * accuracy around 3000 RPM: 3000^2/clock
+ * highest accurate speed: sqrt(clock*100)
+
+The clock speed for the PC87360 family is 480 kHz. I arbitrarily chose 100
+RPM as the lowest acceptable accuracy.
+
+As mentioned above, you don't have to care about this no more.
+
+Note that not all RPM values can be represented, even when the best clock
+divider is selected. This is not only true for the measured speeds, but
+also for the programmable low limits, so don't be surprised if you try to
+set, say, fan1_min to 2900 and it finally reads 2909.
+
+
+Fan Control
+-----------
+
+PWM (pulse width modulation) values range from 0 to 255, with 0 meaning
+that the fan is stopped, and 255 meaning that the fan goes at full speed.
+
+Be extremely careful when changing PWM values. Low PWM values, even
+non-zero, can stop the fan, which may cause irreversible damage to your
+hardware if temperature increases too much. When changing PWM values, go
+step by step and keep an eye on temperatures.
+
+One user reported problems with PWM. Changing PWM values would break fan
+speed readings. No explanation nor fix could be found.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are reported in degrees Celsius. Each temperature measured has
+associated low, high and overtemperature limits, each of which triggers an
+alarm when crossed.
+
+The first two temperature channels are external. The third one (PC87366
+only) is internal.
+
+The PC87366 has three additional temperature channels, based on
+thermistors (as opposed to thermal diodes for the first three temperature
+channels). For technical reasons, these channels are held by the VLM
+(voltage level monitor) logical device, not the TMS (temperature
+measurement) one. As a consequence, these temperatures are exported as
+voltages, and converted into temperatures in user-space.
+
+Note that these three additional channels share their pins with the
+external thermal diode channels, so you (physically) can't use them all at
+the same time. Although it should be possible to mix the two sensor types,
+the documents from National Semiconductor suggest that motherboard
+manufacturers should choose one type and stick to it. So you will more
+likely have either channels 1 to 3 (thermal diodes) or 3 to 6 (internal
+thermal diode, and thermistors).
+
+
+Voltage Monitoring
+------------------
+
+Voltages are reported relatively to a reference voltage, either internal or
+external. Some of them (in7:Vsb, in8:Vdd and in10:AVdd) are divided by two
+internally, you will have to compensate in sensors.conf. Others (in0 to in6)
+are likely to be divided externally. The meaning of each of these inputs as
+well as the values of the resistors used for division is left to the
+motherboard manufacturers, so you will have to document yourself and edit
+sensors.conf accordingly. National Semiconductor has a document with
+recommended resistor values for some voltages, but this still leaves much
+room for per motherboard specificities, unfortunately. Even worse,
+motherboard manufacturers don't seem to care about National Semiconductor's
+recommendations.
+
+Each voltage measured has associated low and high limits, each of which
+triggers an alarm when crossed.
+
+When available, VID inputs are used to provide the nominal CPU Core voltage.
+The driver will default to VRM 9.0, but this can be changed from user-space.
+The chipsets can handle two sets of VID inputs (on dual-CPU systems), but
+the driver will only export one for now. This may change later if there is
+a need.
+
+
+General Remarks
+---------------
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared! Note that all hardware registers are read whenever any
+data is read (unless it is less than 2 seconds since the last update, in
+which case cached values are returned instead). As a consequence, when
+a once-only alarm triggers, it may take 2 seconds for it to show, and 2
+more seconds for it to disappear.
+
+Monitoring of in9 isn't enabled at lower init levels (<3) because that
+channel measures the battery voltage (Vbat). It is a known fact that
+repeatedly sampling the battery voltage reduces its lifetime. National
+Semiconductor smartly designed their chipset so that in9 is sampled only
+once every 1024 sampling cycles (that is every 34 minutes at the default
+sampling rate), so the effect is attenuated, but still present.
+
+
+Limitations
+-----------
+
+The datasheets suggests that some values (fan mins, fan dividers)
+shouldn't be changed once the monitoring has started, but we ignore that
+recommendation. We'll reconsider if it actually causes trouble.
diff --git a/Documentation/hwmon/pc87427.rst b/Documentation/hwmon/pc87427.rst
new file mode 100644
index 000000000..22d8f62d8
--- /dev/null
+++ b/Documentation/hwmon/pc87427.rst
@@ -0,0 +1,63 @@
+Kernel driver pc87427
+=====================
+
+Supported chips:
+
+ * National Semiconductor PC87427
+
+ Prefix: 'pc87427'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: No longer available
+
+Author: Jean Delvare <jdelvare@suse.de>
+
+Thanks to Amir Habibi at Candelis for setting up a test system, and to
+Michael Kress for testing several iterations of this driver.
+
+
+Description
+-----------
+
+The National Semiconductor Super I/O chip includes complete hardware
+monitoring capabilities. It can monitor up to 18 voltages, 8 fans and
+6 temperature sensors. Only the fans and temperatures are supported at
+the moment, voltages aren't.
+
+This chip also has fan controlling features (up to 4 PWM outputs),
+which are partly supported by this driver.
+
+The driver assumes that no more than one chip is present, which seems
+reasonable.
+
+
+Fan Monitoring
+--------------
+
+Fan rotation speeds are reported as 14-bit values from a gated clock
+signal. Speeds down to 83 RPM can be measured.
+
+An alarm is triggered if the rotation speed drops below a programmable
+limit. Another alarm is triggered if the speed is too low to be measured
+(including stalled or missing fan).
+
+
+Fan Speed Control
+-----------------
+
+Fan speed can be controlled by PWM outputs. There are 4 possible modes:
+always off, always on, manual and automatic. The latter isn't supported
+by the driver: you can only return to that mode if it was the original
+setting, and the configuration interface is missing.
+
+
+Temperature Monitoring
+----------------------
+
+The PC87427 relies on external sensors (following the SensorPath
+standard), so the resolution and range depend on the type of sensor
+connected. The integer part can be 8-bit or 9-bit, and can be signed or
+not. I couldn't find a way to figure out the external sensor data
+temperature format, so user-space adjustment (typically by a factor 2)
+may be required.
diff --git a/Documentation/hwmon/pcf8591.rst b/Documentation/hwmon/pcf8591.rst
new file mode 100644
index 000000000..5c4e85f53
--- /dev/null
+++ b/Documentation/hwmon/pcf8591.rst
@@ -0,0 +1,98 @@
+Kernel driver pcf8591
+=====================
+
+Supported chips:
+
+ * Philips/NXP PCF8591
+
+ Prefix: 'pcf8591'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the NXP website
+
+ http://www.nxp.com/pip/PCF8591_6.html
+
+Authors:
+ - Aurelien Jarno <aurelien@aurel32.net>
+ - valuable contributions by Jan M. Sendler <sendler@sendler.de>,
+ - Jean Delvare <jdelvare@suse.de>
+
+
+Description
+-----------
+
+The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
+analog output) for the I2C bus produced by Philips Semiconductors (now NXP).
+It is designed to provide a byte I2C interface to up to 4 separate devices.
+
+The PCF8591 has 4 analog inputs programmable as single-ended or
+differential inputs:
+
+- mode 0 : four single ended inputs
+ Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3
+
+- mode 1 : three differential inputs
+ Pins AIN3 is the common negative differential input
+ Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
+
+- mode 2 : single ended and differential mixed
+ Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1
+ Pins AIN2 is the positive differential input for channel 3
+ Pins AIN3 is the negative differential input for channel 3
+
+- mode 3 : two differential inputs
+ Pins AIN0 is the positive differential input for channel 0
+ Pins AIN1 is the negative differential input for channel 0
+ Pins AIN2 is the positive differential input for channel 1
+ Pins AIN3 is the negative differential input for channel 1
+
+See the datasheet for details.
+
+Module parameters
+-----------------
+
+* input_mode int
+
+ Analog input mode:
+
+ - 0 = four single ended inputs
+ - 1 = three differential inputs
+ - 2 = single ended and differential mixed
+ - 3 = two differential inputs
+
+
+Accessing PCF8591 via /sys interface
+-------------------------------------
+
+The PCF8591 is plainly impossible to detect! Thus the driver won't even
+try. You have to explicitly instantiate the device at the relevant
+address (in the interval [0x48..0x4f]) either through platform data, or
+using the sysfs interface. See Documentation/i2c/instantiating-devices.rst
+for details.
+
+Directories are being created for each instantiated PCF8591:
+
+/sys/bus/i2c/devices/<0>-<1>/
+ where <0> is the bus the chip is connected to (e. g. i2c-0)
+ and <1> the chip address ([48..4f])
+
+Inside these directories, there are such files:
+
+ in0_input, in1_input, in2_input, in3_input, out0_enable, out0_output, name
+
+Name contains chip name.
+
+The in0_input, in1_input, in2_input and in3_input files are RO. Reading gives
+the value of the corresponding channel. Depending on the current analog inputs
+configuration, files in2_input and in3_input may not exist. Values range
+from 0 to 255 for single ended inputs and -128 to +127 for differential inputs
+(8-bit ADC).
+
+The out0_enable file is RW. Reading gives "1" for analog output enabled and
+"0" for analog output disabled. Writing accepts "0" and "1" accordingly.
+
+The out0_output file is RW. Writing a number between 0 and 255 (8-bit DAC), send
+the value to the digital-to-analog converter. Note that a voltage will
+only appears on AOUT pin if aout0_enable equals 1. Reading returns the last
+value written.
diff --git a/Documentation/hwmon/peci-cputemp.rst b/Documentation/hwmon/peci-cputemp.rst
new file mode 100644
index 000000000..fe0422248
--- /dev/null
+++ b/Documentation/hwmon/peci-cputemp.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver peci-cputemp
+==========================
+
+Supported chips:
+ One of Intel server CPUs listed below which is connected to a PECI bus.
+ * Intel Xeon E5/E7 v3 server processors
+ Intel Xeon E5-14xx v3 family
+ Intel Xeon E5-24xx v3 family
+ Intel Xeon E5-16xx v3 family
+ Intel Xeon E5-26xx v3 family
+ Intel Xeon E5-46xx v3 family
+ Intel Xeon E7-48xx v3 family
+ Intel Xeon E7-88xx v3 family
+ * Intel Xeon E5/E7 v4 server processors
+ Intel Xeon E5-16xx v4 family
+ Intel Xeon E5-26xx v4 family
+ Intel Xeon E5-46xx v4 family
+ Intel Xeon E7-48xx v4 family
+ Intel Xeon E7-88xx v4 family
+ * Intel Xeon Scalable server processors
+ Intel Xeon D family
+ Intel Xeon Bronze family
+ Intel Xeon Silver family
+ Intel Xeon Gold family
+ Intel Xeon Platinum family
+
+ Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of the CPU package and CPU cores that are
+accessible via the processor PECI interface.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+Sysfs interface
+-------------------
+
+======================= =======================================================
+temp1_label "Die"
+temp1_input Provides current die temperature of the CPU package.
+temp1_max Provides thermal control temperature of the CPU package
+ which is also known as Tcontrol.
+temp1_crit Provides shutdown temperature of the CPU package which
+ is also known as the maximum processor junction
+ temperature, Tjmax or Tprochot.
+temp1_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
+ the CPU package.
+
+temp2_label "DTS"
+temp2_input Provides current temperature of the CPU package scaled
+ to match DTS thermal profile.
+temp2_max Provides thermal control temperature of the CPU package
+ which is also known as Tcontrol.
+temp2_crit Provides shutdown temperature of the CPU package which
+ is also known as the maximum processor junction
+ temperature, Tjmax or Tprochot.
+temp2_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
+ the CPU package.
+
+temp3_label "Tcontrol"
+temp3_input Provides current Tcontrol temperature of the CPU
+ package which is also known as Fan Temperature target.
+ Indicates the relative value from thermal monitor trip
+ temperature at which fans should be engaged.
+temp3_crit Provides Tcontrol critical value of the CPU package
+ which is same to Tjmax.
+
+temp4_label "Tthrottle"
+temp4_input Provides current Tthrottle temperature of the CPU
+ package. Used for throttling temperature. If this value
+ is allowed and lower than Tjmax - the throttle will
+ occur and reported at lower than Tjmax.
+
+temp5_label "Tjmax"
+temp5_input Provides the maximum junction temperature, Tjmax of the
+ CPU package.
+
+temp[6-N]_label Provides string "Core X", where X is resolved core
+ number.
+temp[6-N]_input Provides current temperature of each core.
+
+======================= =======================================================
diff --git a/Documentation/hwmon/peci-dimmtemp.rst b/Documentation/hwmon/peci-dimmtemp.rst
new file mode 100644
index 000000000..e562aed62
--- /dev/null
+++ b/Documentation/hwmon/peci-dimmtemp.rst
@@ -0,0 +1,57 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver peci-dimmtemp
+===========================
+
+Supported chips:
+ One of Intel server CPUs listed below which is connected to a PECI bus.
+ * Intel Xeon E5/E7 v3 server processors
+ Intel Xeon E5-14xx v3 family
+ Intel Xeon E5-24xx v3 family
+ Intel Xeon E5-16xx v3 family
+ Intel Xeon E5-26xx v3 family
+ Intel Xeon E5-46xx v3 family
+ Intel Xeon E7-48xx v3 family
+ Intel Xeon E7-88xx v3 family
+ * Intel Xeon E5/E7 v4 server processors
+ Intel Xeon E5-16xx v4 family
+ Intel Xeon E5-26xx v4 family
+ Intel Xeon E5-46xx v4 family
+ Intel Xeon E7-48xx v4 family
+ Intel Xeon E7-88xx v4 family
+ * Intel Xeon Scalable server processors
+ Intel Xeon D family
+ Intel Xeon Bronze family
+ Intel Xeon Silver family
+ Intel Xeon Gold family
+ Intel Xeon Platinum family
+
+ Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides
+Temperature sensor on DIMM readings that are accessible via the processor PECI interface.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+Sysfs interface
+-------------------
+
+======================= =======================================================
+
+temp[N]_label Provides string "DIMM CI", where C is DIMM channel and
+ I is DIMM index of the populated DIMM.
+temp[N]_input Provides current temperature of the populated DIMM.
+temp[N]_max Provides thermal control temperature of the DIMM.
+temp[N]_crit Provides shutdown temperature of the DIMM.
+
+======================= =======================================================
+
+Note:
+ DIMM temperature attributes will appear when the client CPU's BIOS
+ completes memory training and testing.
diff --git a/Documentation/hwmon/pim4328.rst b/Documentation/hwmon/pim4328.rst
new file mode 100644
index 000000000..70c9e7a68
--- /dev/null
+++ b/Documentation/hwmon/pim4328.rst
@@ -0,0 +1,105 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver pim4328
+=====================
+
+Supported chips:
+
+ * Flex PIM4328
+
+ Prefix: 'pim4328', 'bmr455'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+https://flexpowermodules.com/resources/fpm-techspec-pim4328
+
+ * Flex PIM4820
+
+ Prefixes: 'pim4820'
+
+ Addresses scanned: -
+
+ Datasheet: https://flexpowermodules.com/resources/fpm-techspec-pim4820
+
+ * Flex PIM4006, PIM4106, PIM4206, PIM4306, PIM4406
+
+ Prefixes: 'pim4006', 'pim4106', 'pim4206', 'pim4306', 'pim4406'
+
+ Addresses scanned: -
+
+ Datasheet: https://flexpowermodules.com/resources/fpm-techspec-pim4006
+
+Author: Erik Rosen <erik.rosen@metormote.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Flex PIM4328 and
+compatible digital power interface modules.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. All attributes are read-only.
+
+======================= ========================================================
+in1_label "vin"
+in1_input Measured input voltage.
+in1_alarm Input voltage alarm.
+
+in2_label "vin.0"
+in2_input Measured input voltage on input A.
+
+ PIM4328 and PIM4X06
+
+in3_label "vin.1"
+in3_input Measured input voltage on input B.
+
+ PIM4328 and PIM4X06
+
+in4_label "vcap"
+in4_input Measured voltage on holdup capacitor.
+
+ PIM4328
+
+curr1_label "iin.0"
+curr1_input Measured input current on input A.
+
+ PIM4X06
+
+curr2_label "iin.1"
+curr2_input Measured input current on input B.
+
+ PIM4X06
+
+currX_label "iout1"
+currX_input Measured output current.
+currX_alarm Output current alarm.
+
+ X is 1 for PIM4820, 3 otherwise.
+
+temp1_input Measured temperature.
+temp1_alarm High temperature alarm.
+======================= ========================================================
diff --git a/Documentation/hwmon/pli1209bc.rst b/Documentation/hwmon/pli1209bc.rst
new file mode 100644
index 000000000..ea5b3f68a
--- /dev/null
+++ b/Documentation/hwmon/pli1209bc.rst
@@ -0,0 +1,75 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver pli1209bc
+=======================
+
+Supported chips:
+
+ * Digital Supervisor PLI1209BC
+
+ Prefix: 'pli1209bc'
+
+ Addresses scanned: 0x50 - 0x5F
+
+ Datasheet: https://www.vicorpower.com/documents/datasheets/ds-PLI1209BCxyzz-VICOR.pdf
+
+Authors:
+ - Marcello Sylvester Bauer <sylv@sylv.io>
+
+Description
+-----------
+
+The Vicor PLI1209BC is an isolated digital power system supervisor that provides
+a communication interface between a host processor and one Bus Converter Module
+(BCM). The PLI communicates with a system controller via a PMBus compatible
+interface over an isolated UART interface. Through the PLI, the host processor
+can configure, set protection limits, and monitor the BCM.
+
+Sysfs entries
+-------------
+
+======================= ========================================================
+in1_label "vin2"
+in1_input Input voltage.
+in1_rated_min Minimum rated input voltage.
+in1_rated_max Maximum rated input voltage.
+in1_max Maximum input voltage.
+in1_max_alarm Input voltage high alarm.
+in1_crit Critical input voltage.
+in1_crit_alarm Input voltage critical alarm.
+
+in2_label "vout2"
+in2_input Output voltage.
+in2_rated_min Minimum rated output voltage.
+in2_rated_max Maximum rated output voltage.
+in2_alarm Output voltage alarm
+
+curr1_label "iin2"
+curr1_input Input current.
+curr1_max Maximum input current.
+curr1_max_alarm Maximum input current high alarm.
+curr1_crit Critical input current.
+curr1_crit_alarm Input current critical alarm.
+
+curr2_label "iout2"
+curr2_input Output current.
+curr2_crit Critical output current.
+curr2_crit_alarm Output current critical alarm.
+curr2_max Maximum output current.
+curr2_max_alarm Output current high alarm.
+
+power1_label "pin2"
+power1_input Input power.
+power1_alarm Input power alarm.
+
+power2_label "pout2"
+power2_input Output power.
+power2_rated_max Maximum rated output power.
+
+temp1_input Die temperature.
+temp1_alarm Die temperature alarm.
+temp1_max Maximum die temperature.
+temp1_max_alarm Die temperature high alarm.
+temp1_crit Critical die temperature.
+temp1_crit_alarm Die temperature critical alarm.
+======================= ========================================================
diff --git a/Documentation/hwmon/pm6764tr.rst b/Documentation/hwmon/pm6764tr.rst
new file mode 100644
index 000000000..294a8ffc8
--- /dev/null
+++ b/Documentation/hwmon/pm6764tr.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver pm6764tr
+======================
+
+Supported chips:
+
+ * ST PM6764TR
+
+ Prefix: 'pm6764tr'
+
+ Addresses scanned: -
+
+ Datasheet: http://www.st.com/resource/en/data_brief/pm6764.pdf
+
+Authors:
+ <hsu.yungteng@gmail.com>
+
+Description:
+------------
+
+This driver supports the STMicroelectronics PM6764TR chip. The PM6764TR is a high
+performance digital controller designed to power Intel's VR12.5 processors and memories.
+
+The device utilizes digital technology to implement all control and power management
+functions to provide maximum flexibility and performance. The NVM is embedded to store
+custom configurations. The PM6764TR device features up to 4-phase programmable operation.
+
+The PM6764TR supports power state transitions featuring VFDE, and programmable DPM
+maintaining the best efficiency over all loading conditions without compromising transient
+response. The device assures fast and independent protection against load overcurrent,
+under/overvoltage and feedback disconnections.
diff --git a/Documentation/hwmon/pmbus-core.rst b/Documentation/hwmon/pmbus-core.rst
new file mode 100644
index 000000000..84c5a4e40
--- /dev/null
+++ b/Documentation/hwmon/pmbus-core.rst
@@ -0,0 +1,360 @@
+==================================
+PMBus core driver and internal API
+==================================
+
+Introduction
+============
+
+[from pmbus.org] The Power Management Bus (PMBus) is an open standard
+power-management protocol with a fully defined command language that facilitates
+communication with power converters and other devices in a power system. The
+protocol is implemented over the industry-standard SMBus serial interface and
+enables programming, control, and real-time monitoring of compliant power
+conversion products. This flexible and highly versatile standard allows for
+communication between devices based on both analog and digital technologies, and
+provides true interoperability which will reduce design complexity and shorten
+time to market for power system designers. Pioneered by leading power supply and
+semiconductor companies, this open power system standard is maintained and
+promoted by the PMBus Implementers Forum (PMBus-IF), comprising 30+ adopters
+with the objective to provide support to, and facilitate adoption among, users.
+
+Unfortunately, while PMBus commands are standardized, there are no mandatory
+commands, and manufacturers can add as many non-standard commands as they like.
+Also, different PMBUs devices act differently if non-supported commands are
+executed. Some devices return an error, some devices return 0xff or 0xffff and
+set a status error flag, and some devices may simply hang up.
+
+Despite all those difficulties, a generic PMBus device driver is still useful
+and supported since kernel version 2.6.39. However, it was necessary to support
+device specific extensions in addition to the core PMBus driver, since it is
+simply unknown what new device specific functionality PMBus device developers
+come up with next.
+
+To make device specific extensions as scalable as possible, and to avoid having
+to modify the core PMBus driver repeatedly for new devices, the PMBus driver was
+split into core, generic, and device specific code. The core code (in
+pmbus_core.c) provides generic functionality. The generic code (in pmbus.c)
+provides support for generic PMBus devices. Device specific code is responsible
+for device specific initialization and, if needed, maps device specific
+functionality into generic functionality. This is to some degree comparable
+to PCI code, where generic code is augmented as needed with quirks for all kinds
+of devices.
+
+PMBus device capabilities auto-detection
+========================================
+
+For generic PMBus devices, code in pmbus.c attempts to auto-detect all supported
+PMBus commands. Auto-detection is somewhat limited, since there are simply too
+many variables to consider. For example, it is almost impossible to autodetect
+which PMBus commands are paged and which commands are replicated across all
+pages (see the PMBus specification for details on multi-page PMBus devices).
+
+For this reason, it often makes sense to provide a device specific driver if not
+all commands can be auto-detected. The data structures in this driver can be
+used to inform the core driver about functionality supported by individual
+chips.
+
+Some commands are always auto-detected. This applies to all limit commands
+(lcrit, min, max, and crit attributes) as well as associated alarm attributes.
+Limits and alarm attributes are auto-detected because there are simply too many
+possible combinations to provide a manual configuration interface.
+
+PMBus internal API
+==================
+
+The API between core and device specific PMBus code is defined in
+drivers/hwmon/pmbus/pmbus.h. In addition to the internal API, pmbus.h defines
+standard PMBus commands and virtual PMBus commands.
+
+Standard PMBus commands
+-----------------------
+
+Standard PMBus commands (commands values 0x00 to 0xff) are defined in the PMBUs
+specification.
+
+Virtual PMBus commands
+----------------------
+
+Virtual PMBus commands are provided to enable support for non-standard
+functionality which has been implemented by several chip vendors and is thus
+desirable to support.
+
+Virtual PMBus commands start with command value 0x100 and can thus easily be
+distinguished from standard PMBus commands (which can not have values larger
+than 0xff). Support for virtual PMBus commands is device specific and thus has
+to be implemented in device specific code.
+
+Virtual commands are named PMBUS_VIRT_xxx and start with PMBUS_VIRT_BASE. All
+virtual commands are word sized.
+
+There are currently two types of virtual commands.
+
+- READ commands are read-only; writes are either ignored or return an error.
+- RESET commands are read/write. Reading reset registers returns zero
+ (used for detection), writing any value causes the associated history to be
+ reset.
+
+Virtual commands have to be handled in device specific driver code. Chip driver
+code returns non-negative values if a virtual command is supported, or a
+negative error code if not. The chip driver may return -ENODATA or any other
+Linux error code in this case, though an error code other than -ENODATA is
+handled more efficiently and thus preferred. Either case, the calling PMBus
+core code will abort if the chip driver returns an error code when reading
+or writing virtual registers (in other words, the PMBus core code will never
+send a virtual command to a chip).
+
+PMBus driver information
+------------------------
+
+PMBus driver information, defined in struct pmbus_driver_info, is the main means
+for device specific drivers to pass information to the core PMBus driver.
+Specifically, it provides the following information.
+
+- For devices supporting its data in Direct Data Format, it provides coefficients
+ for converting register values into normalized data. This data is usually
+ provided by chip manufacturers in device datasheets.
+- Supported chip functionality can be provided to the core driver. This may be
+ necessary for chips which react badly if non-supported commands are executed,
+ and/or to speed up device detection and initialization.
+- Several function entry points are provided to support overriding and/or
+ augmenting generic command execution. This functionality can be used to map
+ non-standard PMBus commands to standard commands, or to augment standard
+ command return values with device specific information.
+
+PEC Support
+===========
+
+Many PMBus devices support SMBus PEC (Packet Error Checking). If supported
+by both the I2C adapter and by the PMBus chip, it is by default enabled.
+If PEC is supported, the PMBus core driver adds an attribute named 'pec' to
+the I2C device. This attribute can be used to control PEC support in the
+communication with the PMBus chip.
+
+API functions
+=============
+
+Functions provided by chip driver
+---------------------------------
+
+All functions return the command return value (read) or zero (write) if
+successful. A return value of -ENODATA indicates that there is no manufacturer
+specific command, but that a standard PMBus command may exist. Any other
+negative return value indicates that the commands does not exist for this
+chip, and that no attempt should be made to read or write the standard
+command.
+
+As mentioned above, an exception to this rule applies to virtual commands,
+which *must* be handled in driver specific code. See "Virtual PMBus Commands"
+above for more details.
+
+Command execution in the core PMBus driver code is as follows::
+
+ if (chip_access_function) {
+ status = chip_access_function();
+ if (status != -ENODATA)
+ return status;
+ }
+ if (command >= PMBUS_VIRT_BASE) /* For word commands/registers only */
+ return -EINVAL;
+ return generic_access();
+
+Chip drivers may provide pointers to the following functions in struct
+pmbus_driver_info. All functions are optional.
+
+::
+
+ int (*read_byte_data)(struct i2c_client *client, int page, int reg);
+
+Read byte from page <page>, register <reg>.
+<page> may be -1, which means "current page".
+
+
+::
+
+ int (*read_word_data)(struct i2c_client *client, int page, int phase,
+ int reg);
+
+Read word from page <page>, phase <pase>, register <reg>. If the chip does not
+support multiple phases, the phase parameter can be ignored. If the chip
+supports multiple phases, a phase value of 0xff indicates all phases.
+
+::
+
+ int (*write_word_data)(struct i2c_client *client, int page, int reg,
+ u16 word);
+
+Write word to page <page>, register <reg>.
+
+::
+
+ int (*write_byte)(struct i2c_client *client, int page, u8 value);
+
+Write byte to page <page>, register <reg>.
+<page> may be -1, which means "current page".
+
+::
+
+ int (*identify)(struct i2c_client *client, struct pmbus_driver_info *info);
+
+Determine supported PMBus functionality. This function is only necessary
+if a chip driver supports multiple chips, and the chip functionality is not
+pre-determined. It is currently only used by the generic pmbus driver
+(pmbus.c).
+
+Functions exported by core driver
+---------------------------------
+
+Chip drivers are expected to use the following functions to read or write
+PMBus registers. Chip drivers may also use direct I2C commands. If direct I2C
+commands are used, the chip driver code must not directly modify the current
+page, since the selected page is cached in the core driver and the core driver
+will assume that it is selected. Using pmbus_set_page() to select a new page
+is mandatory.
+
+::
+
+ int pmbus_set_page(struct i2c_client *client, u8 page, u8 phase);
+
+Set PMBus page register to <page> and <phase> for subsequent commands.
+If the chip does not support multiple phases, the phase parameter is
+ignored. Otherwise, a phase value of 0xff selects all phases.
+
+::
+
+ int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 phase,
+ u8 reg);
+
+Read word data from <page>, <phase>, <reg>. Similar to
+i2c_smbus_read_word_data(), but selects page and phase first. If the chip does
+not support multiple phases, the phase parameter is ignored. Otherwise, a phase
+value of 0xff selects all phases.
+
+::
+
+ int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg,
+ u16 word);
+
+Write word data to <page>, <reg>. Similar to i2c_smbus_write_word_data(), but
+selects page first.
+
+::
+
+ int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
+
+Read byte data from <page>, <reg>. Similar to i2c_smbus_read_byte_data(), but
+selects page first. <page> may be -1, which means "current page".
+
+::
+
+ int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
+
+Write byte data to <page>, <reg>. Similar to i2c_smbus_write_byte(), but
+selects page first. <page> may be -1, which means "current page".
+
+::
+
+ void pmbus_clear_faults(struct i2c_client *client);
+
+Execute PMBus "Clear Fault" command on all chip pages.
+This function calls the device specific write_byte function if defined.
+Therefore, it must _not_ be called from that function.
+
+::
+
+ bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
+
+Check if byte register exists. Return true if the register exists, false
+otherwise.
+This function calls the device specific write_byte function if defined to
+obtain the chip status. Therefore, it must _not_ be called from that function.
+
+::
+
+ bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
+
+Check if word register exists. Return true if the register exists, false
+otherwise.
+This function calls the device specific write_byte function if defined to
+obtain the chip status. Therefore, it must _not_ be called from that function.
+
+::
+
+ int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info);
+
+Execute probe function. Similar to standard probe function for other drivers,
+with the pointer to struct pmbus_driver_info as additional argument. Calls
+identify function if supported. Must only be called from device probe
+function.
+
+::
+
+ const struct pmbus_driver_info
+ *pmbus_get_driver_info(struct i2c_client *client);
+
+Return pointer to struct pmbus_driver_info as passed to pmbus_do_probe().
+
+
+PMBus driver platform data
+==========================
+
+PMBus platform data is defined in include/linux/pmbus.h. Platform data
+currently provides a flags field with four bits used::
+
+ #define PMBUS_SKIP_STATUS_CHECK BIT(0)
+
+ #define PMBUS_WRITE_PROTECTED BIT(1)
+
+ #define PMBUS_NO_CAPABILITY BIT(2)
+
+ #define PMBUS_READ_STATUS_AFTER_FAILED_CHECK BIT(3)
+
+ struct pmbus_platform_data {
+ u32 flags; /* Device specific flags */
+
+ /* regulator support */
+ int num_regulators;
+ struct regulator_init_data *reg_init_data;
+ };
+
+
+Flags
+-----
+
+PMBUS_SKIP_STATUS_CHECK
+
+During register detection, skip checking the status register for
+communication or command errors.
+
+Some PMBus chips respond with valid data when trying to read an unsupported
+register. For such chips, checking the status register is mandatory when
+trying to determine if a chip register exists or not.
+Other PMBus chips don't support the STATUS_CML register, or report
+communication errors for no explicable reason. For such chips, checking the
+status register must be disabled.
+
+Some i2c controllers do not support single-byte commands (write commands with
+no data, i2c_smbus_write_byte()). With such controllers, clearing the status
+register is impossible, and the PMBUS_SKIP_STATUS_CHECK flag must be set.
+
+PMBUS_WRITE_PROTECTED
+
+Set if the chip is write protected and write protection is not determined
+by the standard WRITE_PROTECT command.
+
+PMBUS_NO_CAPABILITY
+
+Some PMBus chips don't respond with valid data when reading the CAPABILITY
+register. For such chips, this flag should be set so that the PMBus core
+driver doesn't use CAPABILITY to determine it's behavior.
+
+PMBUS_READ_STATUS_AFTER_FAILED_CHECK
+
+Read the STATUS register after each failed register check.
+
+Some PMBus chips end up in an undefined state when trying to read an
+unsupported register. For such chips, it is necessary to reset the
+chip pmbus controller to a known state after a failed register check.
+This can be done by reading a known register. By setting this flag the
+driver will try to read the STATUS register after each failed
+register check. This read may fail, but it will put the chip into a
+known state.
diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst
new file mode 100644
index 000000000..7ecfec6ca
--- /dev/null
+++ b/Documentation/hwmon/pmbus.rst
@@ -0,0 +1,277 @@
+Kernel driver pmbus
+===================
+
+Supported chips:
+
+ * Flex BMR310, BMR453, BMR454, BMR456, BMR457, BMR458, BMR480,
+ BMR490, BMR491, BMR492
+
+ Prefixes: 'bmr310', 'bmr453', 'bmr454', 'bmr456', 'bmr457', 'bmr458', 'bmr480',
+ 'bmr490', 'bmr491', 'bmr492'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ https://flexpowermodules.com/products
+
+
+ * ON Semiconductor ADP4000, NCP4200, NCP4208
+
+ Prefixes: 'adp4000', 'ncp4200', 'ncp4208'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ https://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF
+
+ https://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF
+
+ https://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF
+
+ * Lineage Power
+
+ Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf
+
+ http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf
+
+ http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
+
+ http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
+
+ http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
+
+ * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25
+
+ Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ https://www.ti.com/lit/gpn/tps40400
+
+ https://www.ti.com/lit/gpn/tps544b20
+
+ https://www.ti.com/lit/gpn/tps544b25
+
+ https://www.ti.com/lit/gpn/tps544c20
+
+ https://www.ti.com/lit/gpn/tps544c25
+
+ * Maxim MAX20796
+
+ Prefix: 'max20796'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Not published
+
+ * Generic PMBus devices
+
+ Prefix: 'pmbus'
+
+ Addresses scanned: -
+
+ Datasheet: n.a.
+
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for various PMBus compliant devices.
+It supports voltage, current, power, and temperature sensors as supported
+by the device.
+
+Each monitored channel has its own high and low limits, plus a critical
+limit.
+
+Fan support will be added in a later version of this driver.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices, since there is no register
+which can be safely used to identify the chip (The MFG_ID register is not
+supported by all chips), and since there is no well defined address range for
+PMBus devices. You will have to instantiate the devices explicitly.
+
+Example: the following will load the driver for an LTC2978 at address 0x60
+on I2C bus #1::
+
+ $ modprobe pmbus
+ $ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Platform data support
+---------------------
+
+Support for additional PMBus chips can be added by defining chip parameters in
+a new chip specific driver file. For example, (untested) code to add support for
+Emerson DS1200 power modules might look as follows::
+
+ static struct pmbus_driver_info ds1200_info = {
+ .pages = 1,
+ /* Note: All other sensors are in linear mode */
+ .direct[PSC_VOLTAGE_OUT] = true,
+ .direct[PSC_TEMPERATURE] = true,
+ .direct[PSC_CURRENT_OUT] = true,
+ .m[PSC_VOLTAGE_IN] = 1,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 3,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 3,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
+ };
+
+ static int ds1200_probe(struct i2c_client *client)
+ {
+ return pmbus_do_probe(client, &ds1200_info);
+ }
+
+ static const struct i2c_device_id ds1200_id[] = {
+ {"ds1200", 0},
+ {}
+ };
+
+ MODULE_DEVICE_TABLE(i2c, ds1200_id);
+
+ /* This is the driver that will be inserted */
+ static struct i2c_driver ds1200_driver = {
+ .driver = {
+ .name = "ds1200",
+ },
+ .probe_new = ds1200_probe,
+ .id_table = ds1200_id,
+ };
+
+ static int __init ds1200_init(void)
+ {
+ return i2c_add_driver(&ds1200_driver);
+ }
+
+ static void __exit ds1200_exit(void)
+ {
+ i2c_del_driver(&ds1200_driver);
+ }
+
+
+Sysfs entries
+-------------
+
+When probing the chip, the driver identifies which PMBus registers are
+supported, and determines available sensors from this information.
+Attribute files only exist if respective sensors are supported by the chip.
+Labels are provided to inform the user about the sensor associated with
+a given sysfs entry.
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+inX_input Measured voltage. From READ_VIN or READ_VOUT register.
+inX_min Minimum Voltage.
+ From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register.
+inX_max Maximum voltage.
+ From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register.
+inX_lcrit Critical minimum Voltage.
+ From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register.
+inX_crit Critical maximum voltage.
+ From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register.
+inX_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+inX_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+inX_lcrit_alarm Voltage critical low alarm.
+ From VOLTAGE_UV_FAULT status.
+inX_crit_alarm Voltage critical high alarm.
+ From VOLTAGE_OV_FAULT status.
+inX_label "vin", "vcap", or "voutY"
+inX_rated_min Minimum rated voltage.
+ From MFR_VIN_MIN or MFR_VOUT_MIN register.
+inX_rated_max Maximum rated voltage.
+ From MFR_VIN_MAX or MFR_VOUT_MAX register.
+
+currX_input Measured current. From READ_IIN or READ_IOUT register.
+currX_max Maximum current.
+ From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register.
+currX_lcrit Critical minimum output current.
+ From IOUT_UC_FAULT_LIMIT register.
+currX_crit Critical maximum current.
+ From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
+currX_alarm Current high alarm.
+ From IIN_OC_WARNING or IOUT_OC_WARNING status.
+currX_max_alarm Current high alarm.
+ From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
+currX_lcrit_alarm Output current critical low alarm.
+ From IOUT_UC_FAULT status.
+currX_crit_alarm Current critical high alarm.
+ From IIN_OC_FAULT or IOUT_OC_FAULT status.
+currX_label "iin", "iinY", "iinY.Z", "ioutY", or "ioutY.Z",
+ where Y reflects the page number and Z reflects the
+ phase.
+currX_rated_max Maximum rated current.
+ From MFR_IIN_MAX or MFR_IOUT_MAX register.
+
+powerX_input Measured power. From READ_PIN or READ_POUT register.
+powerX_cap Output power cap. From POUT_MAX register.
+powerX_max Power limit. From PIN_OP_WARN_LIMIT or
+ POUT_OP_WARN_LIMIT register.
+powerX_crit Critical output power limit.
+ From POUT_OP_FAULT_LIMIT register.
+powerX_alarm Power high alarm.
+ From PIN_OP_WARNING or POUT_OP_WARNING status.
+powerX_crit_alarm Output power critical high alarm.
+ From POUT_OP_FAULT status.
+powerX_label "pin", "pinY", "pinY.Z", "poutY", or "poutY.Z",
+ where Y reflects the page number and Z reflects the
+ phase.
+powerX_rated_max Maximum rated power.
+ From MFR_PIN_MAX or MFR_POUT_MAX register.
+
+tempX_input Measured temperature.
+ From READ_TEMPERATURE_X register.
+tempX_min Minimum temperature. From UT_WARN_LIMIT register.
+tempX_max Maximum temperature. From OT_WARN_LIMIT register.
+tempX_lcrit Critical low temperature.
+ From UT_FAULT_LIMIT register.
+tempX_crit Critical high temperature.
+ From OT_FAULT_LIMIT register.
+tempX_min_alarm Chip temperature low alarm. Set by comparing
+ READ_TEMPERATURE_X with UT_WARN_LIMIT if
+ TEMP_UT_WARNING status is set.
+tempX_max_alarm Chip temperature high alarm. Set by comparing
+ READ_TEMPERATURE_X with OT_WARN_LIMIT if
+ TEMP_OT_WARNING status is set.
+tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing
+ READ_TEMPERATURE_X with UT_FAULT_LIMIT if
+ TEMP_UT_FAULT status is set.
+tempX_crit_alarm Chip temperature critical high alarm. Set by comparing
+ READ_TEMPERATURE_X with OT_FAULT_LIMIT if
+ TEMP_OT_FAULT status is set.
+tempX_rated_min Minimum rated temperature.
+ From MFR_TAMBIENT_MIN register.
+tempX_rated_max Maximum rated temperature.
+ From MFR_TAMBIENT_MAX, MFR_MAX_TEMP_1, MFR_MAX_TEMP_2 or
+ MFR_MAX_TEMP_3 register.
+======================= ========================================================
diff --git a/Documentation/hwmon/powr1220.rst b/Documentation/hwmon/powr1220.rst
new file mode 100644
index 000000000..a7fc258da
--- /dev/null
+++ b/Documentation/hwmon/powr1220.rst
@@ -0,0 +1,53 @@
+Kernel driver powr1220
+======================
+
+Supported chips:
+
+ * Lattice POWR1220AT8
+
+ Prefix: 'powr1220'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Lattice website
+
+ http://www.latticesemi.com/
+
+Author: Scott Kanowitz <scott.kanowitz@gmail.com>
+
+Description
+-----------
+
+This driver supports the Lattice POWR1220AT8 chip. The POWR1220
+includes voltage monitoring for 14 inputs as well as trim settings
+for output voltages and GPIOs. This driver implements the voltage
+monitoring portion of the chip.
+
+Voltages are sampled by a 12-bit ADC with a step size of 2 mV.
+An in-line attenuator allows measurements from 0 to 6 V. The
+attenuator is enabled or disabled depending on the setting of the
+input's max value. The driver will enable the attenuator for any
+value over the low measurement range maximum of 2 V.
+
+The input naming convention is as follows:
+
+============== ========
+driver name pin name
+============== ========
+in0 VMON1
+in1 VMON2
+in2 VMON3
+in2 VMON4
+in4 VMON5
+in5 VMON6
+in6 VMON7
+in7 VMON8
+in8 VMON9
+in9 VMON10
+in10 VMON11
+in11 VMON12
+in12 VCCA
+in13 VCCINP
+============== ========
+
+The ADC readings are updated on request with a minimum period of 1s.
diff --git a/Documentation/hwmon/pwm-fan.rst b/Documentation/hwmon/pwm-fan.rst
new file mode 100644
index 000000000..f77998b20
--- /dev/null
+++ b/Documentation/hwmon/pwm-fan.rst
@@ -0,0 +1,32 @@
+Kernel driver pwm-fan
+=====================
+
+This driver enables the use of a PWM module to drive a fan. It uses the
+generic PWM interface thus it is hardware independent. It can be used on
+many SoCs, as long as the SoC supplies a PWM line driver that exposes
+the generic PWM API.
+
+Author: Kamil Debski <k.debski@samsung.com>
+
+Description
+-----------
+
+The driver implements a simple interface for driving a fan connected to
+a PWM output. It uses the generic PWM interface, thus it can be used with
+a range of SoCs. The driver exposes the fan to the user space through
+the hwmon's sysfs interface.
+
+The fan rotation speed returned via the optional 'fan1_input' is extrapolated
+from the sampled interrupts from the tachometer signal within 1 second.
+
+The driver provides the following sensor accesses in sysfs:
+
+=============== ======= =======================================================
+fan1_input ro fan tachometer speed in RPM
+pwm1_enable rw keep enable mode, defines behaviour when pwm1=0
+ 0 -> disable pwm and regulator
+ 1 -> enable pwm; if pwm==0, disable pwm, keep regulator enabled
+ 2 -> enable pwm; if pwm==0, keep pwm and regulator enabled
+ 3 -> enable pwm; if pwm==0, disable pwm and regulator
+pwm1 rw relative speed (0-255), 255=max. speed.
+=============== ======= =======================================================
diff --git a/Documentation/hwmon/pxe1610.rst b/Documentation/hwmon/pxe1610.rst
new file mode 100644
index 000000000..4f2388840
--- /dev/null
+++ b/Documentation/hwmon/pxe1610.rst
@@ -0,0 +1,107 @@
+Kernel driver pxe1610
+=====================
+
+Supported chips:
+
+ * Infineon PXE1610
+
+ Prefix: 'pxe1610'
+
+ Addresses scanned: -
+
+ Datasheet: Datasheet is not publicly available.
+
+ * Infineon PXE1110
+
+ Prefix: 'pxe1110'
+
+ Addresses scanned: -
+
+ Datasheet: Datasheet is not publicly available.
+
+ * Infineon PXM1310
+
+ Prefix: 'pxm1310'
+
+ Addresses scanned: -
+
+ Datasheet: Datasheet is not publicly available.
+
+Author: Vijay Khemka <vijaykhemka@fb.com>
+
+
+Description
+-----------
+
+PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers
+and compliant to
+
+ - Intel VR13 DC-DC converter specifications.
+ - Intel SVID protocol.
+
+Used for Vcore power regulation for Intel VR13 based microprocessors
+
+ - Servers, Workstations, and High-end desktops
+
+PXM1310 is a Multi-rail Controller and it is compliant to
+
+ - Intel VR13 DC-DC converter specifications.
+ - Intel SVID protocol.
+
+Used for DDR3/DDR4 Memory power regulation for Intel VR13 and
+IMVP8 based systems
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have
+to instantiate devices explicitly.
+
+Example: the following commands will load the driver for an PXE1610
+at address 0x70 on I2C bus #4::
+
+ # modprobe pxe1610
+ # echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
+
+It can also be instantiated by declaring in device tree
+
+
+Sysfs attributes
+----------------
+
+====================== ====================================
+curr1_label "iin"
+curr1_input Measured input current
+curr1_alarm Current high alarm
+
+curr[2-4]_label "iout[1-3]"
+curr[2-4]_input Measured output current
+curr[2-4]_crit Critical maximum current
+curr[2-4]_crit_alarm Current critical high alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage critical high alarm
+
+in[2-4]_label "vout[1-3]"
+in[2-4]_input Measured output voltage
+in[2-4]_lcrit Critical minimum output voltage
+in[2-4]_lcrit_alarm Output voltage critical low alarm
+in[2-4]_crit Critical maximum output voltage
+in[2-4]_crit_alarm Output voltage critical high alarm
+
+power1_label "pin"
+power1_input Measured input power
+power1_alarm Input power high alarm
+
+power[2-4]_label "pout[1-3]"
+power[2-4]_input Measured output power
+
+temp[1-3]_input Measured temperature
+temp[1-3]_crit Critical high temperature
+temp[1-3]_crit_alarm Chip temperature critical high alarm
+temp[1-3]_max Maximum temperature
+temp[1-3]_max_alarm Chip temperature high alarm
+====================== ====================================
diff --git a/Documentation/hwmon/q54sj108a2.rst b/Documentation/hwmon/q54sj108a2.rst
new file mode 100644
index 000000000..f95d81382
--- /dev/null
+++ b/Documentation/hwmon/q54sj108a2.rst
@@ -0,0 +1,54 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver q54sj108a2
+========================
+
+Supported chips:
+
+ * DELTA Q54SJ108A2NCAH, Q54SJ108A2NCDH, Q54SJ108A2NCPG, Q54SJ108A2NCPH
+
+ Prefix: 'q54sj108a2'
+
+ Addresses scanned: -
+
+ Datasheet: https://filecenter.delta-china.com.cn/products/download/01/0102/datasheet/DS_Q54SJ108A2.pdf
+
+Authors:
+ Xiao.ma <xiao.mx.ma@deltaww.com>
+
+
+Description
+-----------
+
+This driver implements support for DELTA Q54SJ108A2NCAH, Q54SJ108A2NCDH,
+Q54SJ108A2NCPG, and Q54SJ108A2NCPH 1/4 Brick DC/DC Regulated Power Module
+with PMBus support.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Sysfs entries
+-------------
+
+===================== ===== ==================================================
+curr1_alarm RO Output current alarm
+curr1_input RO Output current
+curr1_label RO 'iout1'
+in1_alarm RO Input voltage alarm
+in1_input RO Input voltage
+in1_label RO 'vin'
+in2_alarm RO Output voltage alarm
+in2_input RO Output voltage
+in2_label RO 'vout1'
+temp1_alarm RO Temperature alarm
+temp1_input RO Chip temperature
+===================== ===== ==================================================
diff --git a/Documentation/hwmon/raspberrypi-hwmon.rst b/Documentation/hwmon/raspberrypi-hwmon.rst
new file mode 100644
index 000000000..8038ade36
--- /dev/null
+++ b/Documentation/hwmon/raspberrypi-hwmon.rst
@@ -0,0 +1,25 @@
+Kernel driver raspberrypi-hwmon
+===============================
+
+Supported boards:
+
+ * Raspberry Pi A+ (via GPIO on SoC)
+ * Raspberry Pi B+ (via GPIO on SoC)
+ * Raspberry Pi 2 B (via GPIO on SoC)
+ * Raspberry Pi 3 B (via GPIO on port expander)
+ * Raspberry Pi 3 B+ (via PMIC)
+
+Author: Stefan Wahren <stefan.wahren@i2se.com>
+
+Description
+-----------
+
+This driver periodically polls a mailbox property of the VC4 firmware to detect
+undervoltage conditions.
+
+Sysfs entries
+-------------
+
+======================= ==================
+in0_lcrit_alarm Undervoltage alarm
+======================= ==================
diff --git a/Documentation/hwmon/sbrmi.rst b/Documentation/hwmon/sbrmi.rst
new file mode 100644
index 000000000..296049e13
--- /dev/null
+++ b/Documentation/hwmon/sbrmi.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver sbrmi
+===================
+
+Supported hardware:
+
+ * Sideband Remote Management Interface (SB-RMI) compliant AMD SoC
+ device connected to the BMC via the APML.
+
+ Prefix: 'sbrmi'
+
+ Addresses scanned: This driver doesn't support address scanning.
+
+ To instantiate this driver on an AMD CPU with SB-RMI
+ support, the i2c bus number would be the bus connected from the board
+ management controller (BMC) to the CPU.
+ The SMBus address is really 7 bits. Some vendors and the SMBus
+ specification show the address as 8 bits, left justified with the R/W
+ bit as a write (0) making bit 0. Some vendors use only the 7 bits
+ to describe the address.
+ As mentioned in AMD's APML specification, The SB-RMI address is
+ normally 78h(0111 100W) or 3Ch(011 1100) for socket 0 and 70h(0111 000W)
+ or 38h(011 1000) for socket 1, but it could vary based on hardware
+ address select pins.
+
+ Datasheet: The SB-RMI interface and protocol along with the Advanced
+ Platform Management Link (APML) Specification is available
+ as part of the open source SoC register reference at:
+
+ https://www.amd.com/en/support/tech-docs?keyword=55898
+
+Author: Akshay Gupta <akshay.gupta@amd.com>
+
+Description
+-----------
+
+The APML provides a way to communicate with the SB Remote Management interface
+(SB-RMI) module from the external SMBus master that can be used to report socket
+power on AMD platforms using mailbox command and resembles a typical 8-pin remote
+power sensor's I2C interface to BMC.
+
+This driver implements current power with power cap and power cap max.
+
+sysfs-Interface
+---------------
+Power sensors can be queried and set via the standard ``hwmon`` interface
+on ``sysfs``, under the directory ``/sys/class/hwmon/hwmonX`` for some value
+of ``X`` (search for the ``X`` such that ``/sys/class/hwmon/hwmonX/name`` has
+content ``sbrmi``)
+
+================ ===== ========================================================
+Name Perm Description
+================ ===== ========================================================
+power1_input RO Current Power consumed
+power1_cap RW Power limit can be set between 0 and power1_cap_max
+power1_cap_max RO Maximum powerlimit calculated and reported by the SMU FW
+================ ===== ========================================================
+
+The following example show how the 'Power' attribute from the i2c-addresses
+can be monitored using the userspace utilities like ``sensors`` binary::
+
+ # sensors
+ sbrmi-i2c-1-38
+ Adapter: bcm2835 I2C adapter
+ power1: 61.00 W (cap = 225.00 W)
+
+ sbrmi-i2c-1-3c
+ Adapter: bcm2835 I2C adapter
+ power1: 28.39 W (cap = 224.77 W)
+ #
+
+Also, Below shows how get and set the values from sysfs entries individually::
+ # cat /sys/class/hwmon/hwmon1/power1_cap_max
+ 225000000
+
+ # echo 180000000 > /sys/class/hwmon/hwmon1/power1_cap
+ # cat /sys/class/hwmon/hwmon1/power1_cap
+ 180000000
diff --git a/Documentation/hwmon/sbtsi_temp.rst b/Documentation/hwmon/sbtsi_temp.rst
new file mode 100644
index 000000000..749f51838
--- /dev/null
+++ b/Documentation/hwmon/sbtsi_temp.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver sbtsi_temp
+========================
+
+Supported hardware:
+
+ * Sideband interface (SBI) Temperature Sensor Interface (SB-TSI)
+ compliant AMD SoC temperature device.
+
+ Prefix: 'sbtsi_temp'
+
+ Addresses scanned: This driver doesn't support address scanning.
+
+ To instantiate this driver on an AMD CPU with SB-TSI
+ support, the i2c bus number would be the bus connected from the board
+ management controller (BMC) to the CPU. The i2c address is specified in
+ Section 6.3.1 of the SoC register reference: The SB-TSI address is normally
+ 98h for socket 0 and 90h for socket 1, but it could vary based on hardware
+ address select pins.
+
+ Datasheet: The SB-TSI interface and protocol is available as part of
+ the open source SoC register reference at:
+
+ https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf
+
+ The Advanced Platform Management Link (APML) Specification is
+ available at:
+
+ http://developer.amd.com/wordpress/media/2012/10/41918.pdf
+
+Author: Kun Yi <kunyi@google.com>
+
+Description
+-----------
+
+The SBI temperature sensor interface (SB-TSI) is an emulation of the software
+and physical interface of a typical 8-pin remote temperature sensor (RTS) on
+AMD SoCs. It implements one temperature sensor with readings and limit
+registers encode the temperature in increments of 0.125 from 0 to 255.875.
+Limits can be set through the writable thresholds, and if reached will trigger
+corresponding alert signals.
diff --git a/Documentation/hwmon/sch5627.rst b/Documentation/hwmon/sch5627.rst
new file mode 100644
index 000000000..ecb4fc84d
--- /dev/null
+++ b/Documentation/hwmon/sch5627.rst
@@ -0,0 +1,35 @@
+Kernel driver sch5627
+=====================
+
+Supported chips:
+
+ * SMSC SCH5627
+
+ Prefix: 'sch5627'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: Application Note available upon request
+
+Author: Hans de Goede <hdegoede@redhat.com>
+
+
+Description
+-----------
+
+SMSC SCH5627 Super I/O chips include complete hardware monitoring
+capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures.
+
+In addition, the SCH5627 exports data describing which temperature sensors
+affect the speed of each fan. Setting pwmX_auto_channels_temp to 0 forces
+the corresponding fan to full speed until another value is written.
+
+The SMSC SCH5627 hardware monitoring part also contains an integrated
+watchdog. In order for this watchdog to function some motherboard specific
+initialization most be done by the BIOS, so if the watchdog is not enabled
+by the BIOS the sch5627 driver will not register a watchdog device.
+
+The hardware monitoring part of the SMSC SCH5627 is accessed by talking
+through an embedded microcontroller. An application note describing the
+protocol for communicating with the microcontroller is available upon
+request. Please mail me if you want a copy.
diff --git a/Documentation/hwmon/sch5636.rst b/Documentation/hwmon/sch5636.rst
new file mode 100644
index 000000000..4aaee3672
--- /dev/null
+++ b/Documentation/hwmon/sch5636.rst
@@ -0,0 +1,37 @@
+Kernel driver sch5636
+=====================
+
+Supported chips:
+
+ * SMSC SCH5636
+
+ Prefix: 'sch5636'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+Author: Hans de Goede <hdegoede@redhat.com>
+
+
+Description
+-----------
+
+SMSC SCH5636 Super I/O chips include an embedded microcontroller for
+hardware monitoring solutions, allowing motherboard manufacturers to create
+their own custom hwmon solution based upon the SCH5636.
+
+Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636 based
+hwmon solution. The sch5636 driver runs a sanity check on loading to ensure
+it is dealing with a Fujitsu Theseus and not with another custom SCH5636 based
+hwmon solution.
+
+The Fujitsu Theseus can monitor up to 5 voltages, 8 fans and 16
+temperatures. Note that the driver detects how many fan headers /
+temperature sensors are actually implemented on the motherboard, so you will
+likely see fewer temperature and fan inputs.
+
+The Fujitsu Theseus hwmon solution also contains an integrated watchdog.
+This watchdog is fully supported by the sch5636 driver.
+
+An application note describing the Theseus' registers, as well as an
+application note describing the protocol for communicating with the
+microcontroller is available upon request. Please mail me if you want a copy.
diff --git a/Documentation/hwmon/scpi-hwmon.rst b/Documentation/hwmon/scpi-hwmon.rst
new file mode 100644
index 000000000..1e3f83ec0
--- /dev/null
+++ b/Documentation/hwmon/scpi-hwmon.rst
@@ -0,0 +1,36 @@
+Kernel driver scpi-hwmon
+========================
+
+Supported chips:
+
+ * Chips based on ARM System Control Processor Interface
+
+ Addresses scanned: -
+
+ Datasheet: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/index.html
+
+Author: Punit Agrawal <punit.agrawal@arm.com>
+
+Description
+-----------
+
+This driver supports hardware monitoring for SoC's based on the ARM
+System Control Processor (SCP) implementing the System Control
+Processor Interface (SCPI). The following sensor types are supported
+by the SCP:
+
+ * temperature
+ * voltage
+ * current
+ * power
+
+The SCP interface provides an API to query the available sensors and
+their values which are then exported to userspace by this driver.
+
+Usage Notes
+-----------
+
+The driver relies on device tree node to indicate the presence of SCPI
+support in the kernel. See
+Documentation/devicetree/bindings/firmware/arm,scpi.yaml for details of the
+devicetree node.
diff --git a/Documentation/hwmon/sht15.rst b/Documentation/hwmon/sht15.rst
new file mode 100644
index 000000000..485abe037
--- /dev/null
+++ b/Documentation/hwmon/sht15.rst
@@ -0,0 +1,83 @@
+Kernel driver sht15
+===================
+
+Authors:
+
+ * Wouter Horre
+ * Jonathan Cameron
+ * Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ * Jerome Oufella <jerome.oufella@savoirfairelinux.com>
+
+Supported chips:
+
+ * Sensirion SHT10
+
+ Prefix: 'sht10'
+
+ * Sensirion SHT11
+
+ Prefix: 'sht11'
+
+ * Sensirion SHT15
+
+ Prefix: 'sht15'
+
+ * Sensirion SHT71
+
+ Prefix: 'sht71'
+
+ * Sensirion SHT75
+
+ Prefix: 'sht75'
+
+Datasheet: Publicly available at the Sensirion website
+
+ http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
+
+Description
+-----------
+
+The SHT10, SHT11, SHT15, SHT71, and SHT75 are humidity and temperature
+sensors.
+
+The devices communicate using two GPIO lines.
+
+Supported resolutions for the measurements are 14 bits for temperature and 12
+bits for humidity, or 12 bits for temperature and 8 bits for humidity.
+
+The humidity calibration coefficients are programmed into an OTP memory on the
+chip. These coefficients are used to internally calibrate the signals from the
+sensors. Disabling the reload of those coefficients allows saving 10ms for each
+measurement and decrease power consumption, while losing on precision.
+
+Some options may be set via sysfs attributes.
+
+Notes:
+ * The regulator supply name is set to "vcc".
+ * If a CRC validation fails, a soft reset command is sent, which resets
+ status register to its hardware default value, but the driver will try to
+ restore the previous device configuration.
+
+Platform data
+-------------
+
+* checksum:
+ set it to true to enable CRC validation of the readings (default to false).
+* no_otp_reload:
+ flag to indicate not to reload from OTP (default to false).
+* low_resolution:
+ flag to indicate the temp/humidity resolution to use (default to false).
+
+Sysfs interface
+---------------
+
+================== ==========================================================
+temp1_input temperature input
+humidity1_input humidity input
+heater_enable write 1 in this attribute to enable the on-chip heater,
+ 0 to disable it. Be careful not to enable the heater
+ for too long.
+temp1_fault if 1, this means that the voltage is low (below 2.47V) and
+ measurement may be invalid.
+humidity1_fault same as temp1_fault.
+================== ==========================================================
diff --git a/Documentation/hwmon/sht21.rst b/Documentation/hwmon/sht21.rst
new file mode 100644
index 000000000..1bccc8e8a
--- /dev/null
+++ b/Documentation/hwmon/sht21.rst
@@ -0,0 +1,68 @@
+Kernel driver sht21
+===================
+
+Supported chips:
+
+ * Sensirion SHT21
+
+ Prefix: 'sht21'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Sensirion website
+
+ https://www.sensirion.com/file/datasheet_sht21
+
+
+
+ * Sensirion SHT25
+
+ Prefix: 'sht25'
+
+ Addresses scanned: none
+
+ Datasheet: Publicly available at the Sensirion website
+
+ https://www.sensirion.com/file/datasheet_sht25
+
+
+
+Author:
+
+ Urs Fleisch <urs.fleisch@sensirion.com>
+
+Description
+-----------
+
+The SHT21 and SHT25 are humidity and temperature sensors in a DFN package of
+only 3 x 3 mm footprint and 1.1 mm height. The difference between the two
+devices is the higher level of precision of the SHT25 (1.8% relative humidity,
+0.2 degree Celsius) compared with the SHT21 (2.0% relative humidity,
+0.3 degree Celsius).
+
+The devices communicate with the I2C protocol. All sensors are set to the same
+I2C address 0x40, so an entry with I2C_BOARD_INFO("sht21", 0x40) can be used
+in the board setup code.
+
+sysfs-Interface
+---------------
+
+temp1_input
+ - temperature input
+
+humidity1_input
+ - humidity input
+eic
+ - Electronic Identification Code
+
+Notes
+-----
+
+The driver uses the default resolution settings of 12 bit for humidity and 14
+bit for temperature, which results in typical measurement times of 22 ms for
+humidity and 66 ms for temperature. To keep self heating below 0.1 degree
+Celsius, the device should not be active for more than 10% of the time,
+e.g. maximum two measurements per second at the given resolution.
+
+Different resolutions, the on-chip heater, and using the CRC checksum
+are not supported yet.
diff --git a/Documentation/hwmon/sht3x.rst b/Documentation/hwmon/sht3x.rst
new file mode 100644
index 000000000..95a850d5b
--- /dev/null
+++ b/Documentation/hwmon/sht3x.rst
@@ -0,0 +1,88 @@
+Kernel driver sht3x
+===================
+
+Supported chips:
+
+ * Sensirion SHT3x-DIS
+
+ Prefix: 'sht3x'
+
+ Addresses scanned: none
+
+ Datasheet: https://www.sensirion.com/file/datasheet_sht3x_digital
+
+Author:
+
+ - David Frey <david.frey@sensirion.com>
+ - Pascal Sachs <pascal.sachs@sensirion.com>
+
+Description
+-----------
+
+This driver implements support for the Sensirion SHT3x-DIS chip, a humidity
+and temperature sensor. Temperature is measured in degrees celsius, relative
+humidity is expressed as a percentage. In the sysfs interface, all values are
+scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
+
+The device communicates with the I2C protocol. Sensors can have the I2C
+addresses 0x44 or 0x45, depending on the wiring. See
+Documentation/i2c/instantiating-devices.rst for methods to instantiate the device.
+
+There are two options configurable by means of sht3x_platform_data:
+
+1. blocking (pull the I2C clock line down while performing the measurement) or
+ non-blocking mode. Blocking mode will guarantee the fastest result but
+ the I2C bus will be busy during that time. By default, non-blocking mode
+ is used. Make sure clock-stretching works properly on your device if you
+ want to use blocking mode.
+2. high or low accuracy. High accuracy is used by default and using it is
+ strongly recommended.
+
+The sht3x sensor supports a single shot mode as well as 5 periodic measure
+modes, which can be controlled with the update_interval sysfs interface.
+The allowed update_interval in milliseconds are as follows:
+
+ ===== ======= ====================
+ 0 single shot mode
+ 2000 0.5 Hz periodic measurement
+ 1000 1 Hz periodic measurement
+ 500 2 Hz periodic measurement
+ 250 4 Hz periodic measurement
+ 100 10 Hz periodic measurement
+ ===== ======= ====================
+
+In the periodic measure mode, the sensor automatically triggers a measurement
+with the configured update interval on the chip. When a temperature or humidity
+reading exceeds the configured limits, the alert attribute is set to 1 and
+the alert pin on the sensor is set to high.
+When the temperature and humidity readings move back between the hysteresis
+values, the alert bit is set to 0 and the alert pin on the sensor is set to
+low.
+
+sysfs-Interface
+---------------
+
+=================== ============================================================
+temp1_input: temperature input
+humidity1_input: humidity input
+temp1_max: temperature max value
+temp1_max_hyst: temperature hysteresis value for max limit
+humidity1_max: humidity max value
+humidity1_max_hyst: humidity hysteresis value for max limit
+temp1_min: temperature min value
+temp1_min_hyst: temperature hysteresis value for min limit
+humidity1_min: humidity min value
+humidity1_min_hyst: humidity hysteresis value for min limit
+temp1_alarm: alarm flag is set to 1 if the temperature is outside the
+ configured limits. Alarm only works in periodic measure mode
+humidity1_alarm: alarm flag is set to 1 if the humidity is outside the
+ configured limits. Alarm only works in periodic measure mode
+heater_enable: heater enable, heating element removes excess humidity from
+ sensor:
+
+ - 0: turned off
+ - 1: turned on
+update_interval: update interval, 0 for single shot, interval in msec
+ for periodic measurement. If the interval is not supported
+ by the sensor, the next faster interval is chosen
+=================== ============================================================
diff --git a/Documentation/hwmon/sht4x.rst b/Documentation/hwmon/sht4x.rst
new file mode 100644
index 000000000..c318e5582
--- /dev/null
+++ b/Documentation/hwmon/sht4x.rst
@@ -0,0 +1,45 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver sht4x
+===================
+
+Supported Chips:
+
+ * Sensirion SHT4X
+
+ Prefix: 'sht4x'
+
+ Addresses scanned: None
+
+ Datasheet:
+
+ English: https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT4x_Datasheet.pdf
+
+Author: Navin Sankar Velliangiri <navin@linumiz.com>
+
+
+Description
+-----------
+
+This driver implements support for the Sensirion SHT4x chip, a humidity
+and temperature sensor. Temperature is measured in degree celsius, relative
+humidity is expressed as a percentage. In sysfs interface, all values are
+scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
+
+Usage Notes
+-----------
+
+The device communicates with the I2C protocol. Sensors can have the I2C
+address 0x44. See Documentation/i2c/instantiating-devices.rst for methods
+to instantiate the device.
+
+Sysfs entries
+-------------
+
+=============== ============================================
+temp1_input Measured temperature in millidegrees Celcius
+humidity1_input Measured humidity in %H
+update_interval The minimum interval for polling the sensor,
+ in milliseconds. Writable. Must be at least
+ 2000.
+=============== ============================================
diff --git a/Documentation/hwmon/shtc1.rst b/Documentation/hwmon/shtc1.rst
new file mode 100644
index 000000000..f38c4c9d2
--- /dev/null
+++ b/Documentation/hwmon/shtc1.rst
@@ -0,0 +1,67 @@
+Kernel driver shtc1
+===================
+
+Supported chips:
+
+ * Sensirion SHTC1
+
+ Prefix: 'shtc1'
+
+ Addresses scanned: none
+
+ Datasheet: https://www.sensirion.com/file/datasheet_shtc1
+
+
+
+ * Sensirion SHTW1
+
+ Prefix: 'shtw1'
+
+ Addresses scanned: none
+
+ Datasheet: https://www.sensirion.com/file/datasheet_shtw1
+
+
+
+ * Sensirion SHTC3
+
+ Prefix: 'shtc3'
+
+ Addresses scanned: none
+
+ Datasheet: https://www.sensirion.com/file/datasheet_shtc3
+
+
+
+Author:
+
+ Johannes Winkelmann <johannes.winkelmann@sensirion.com>
+
+Description
+-----------
+
+This driver implements support for the Sensirion SHTC1, SHTW1, and SHTC3
+chips, a humidity and temperature sensor. Temperature is measured in degrees
+celsius, relative humidity is expressed as a percentage.
+
+The device communicates with the I2C protocol. All sensors are set to I2C
+address 0x70. See Documentation/i2c/instantiating-devices.rst for methods to
+instantiate the device.
+
+There are two options configurable by means of shtc1_platform_data:
+
+1. blocking (pull the I2C clock line down while performing the measurement) or
+ non-blocking mode. Blocking mode will guarantee the fastest result but
+ the I2C bus will be busy during that time. By default, non-blocking mode
+ is used. Make sure clock-stretching works properly on your device if you
+ want to use blocking mode.
+2. high or low accuracy. High accuracy is used by default and using it is
+ strongly recommended.
+
+sysfs-Interface
+---------------
+
+temp1_input
+ - temperature input
+humidity1_input
+ - humidity input
diff --git a/Documentation/hwmon/sis5595.rst b/Documentation/hwmon/sis5595.rst
new file mode 100644
index 000000000..16123b3bf
--- /dev/null
+++ b/Documentation/hwmon/sis5595.rst
@@ -0,0 +1,123 @@
+Kernel driver sis5595
+=====================
+
+Supported chips:
+
+ * Silicon Integrated Systems Corp. SiS5595 Southbridge Hardware Monitor
+
+ Prefix: 'sis5595'
+
+ Addresses scanned: ISA in PCI-space encoded address
+
+ Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
+
+
+
+Authors:
+
+ - Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ - Mark D. Studebaker <mdsxyz123@yahoo.com>,
+ - Aurelien Jarno <aurelien@aurel32.net> 2.6 port
+
+ SiS southbridge has a LM78-like chip integrated on the same IC.
+ This driver is a customized copy of lm78.c
+
+ Supports following revisions:
+
+ =============== =============== ==============
+ Version PCI ID PCI Revision
+ =============== =============== ==============
+ 1 1039/0008 AF or less
+ 2 1039/0008 B0 or greater
+ =============== =============== ==============
+
+ Note: these chips contain a 0008 device which is incompatible with the
+ 5595. We recognize these by the presence of the listed
+ "blacklist" PCI ID and refuse to load.
+
+ =================== =============== ================
+ NOT SUPPORTED PCI ID BLACKLIST PCI ID
+ =================== =============== ================
+ 540 0008 0540
+ 550 0008 0550
+ 5513 0008 5511
+ 5581 0008 5597
+ 5582 0008 5597
+ 5597 0008 5597
+ 630 0008 0630
+ 645 0008 0645
+ 730 0008 0730
+ 735 0008 0735
+ =================== =============== ================
+
+
+Module Parameters
+-----------------
+
+======================= =====================================================
+force_addr=0xaddr Set the I/O base address. Useful for boards
+ that don't set the address in the BIOS. Does not do a
+ PCI force; the device must still be present in lspci.
+ Don't use this unless the driver complains that the
+ base address is not set.
+
+ Example: 'modprobe sis5595 force_addr=0x290'
+======================= =====================================================
+
+
+Description
+-----------
+
+The SiS5595 southbridge has integrated hardware monitor functions. It also
+has an I2C bus, but this driver only supports the hardware monitor. For the
+I2C bus driver see i2c-sis5595.
+
+The SiS5595 implements zero or one temperature sensor, two fan speed
+sensors, four or five voltage sensors, and alarms.
+
+On the first version of the chip, there are four voltage sensors and one
+temperature sensor.
+
+On the second version of the chip, the temperature sensor (temp) and the
+fifth voltage sensor (in4) share a pin which is configurable, but not
+through the driver. Sorry. The driver senses the configuration of the pin,
+which was hopefully set by the BIOS.
+
+Temperatures are measured in degrees Celsius. An alarm is triggered once
+when the max is crossed; it is also triggered when it drops below the min
+value. Measurements are guaranteed between -55 and +125 degrees, with a
+resolution of 1 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts. An
+alarm is triggered if the voltage has crossed a programmable minimum or
+maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 4.08 volts, with a resolution of
+0.016 volt.
+
+In addition to the alarms described above, there is a BTI alarm, which gets
+triggered when an external chip has crossed its limits. Usually, this is
+connected to some LM75-like chip; if at least one crosses its limits, this
+bit gets set.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared! Note that in the current implementation, all hardware
+registers are read whenever any data is read (unless it is less than 1.5
+seconds since the last update). This means that you can easily miss
+once-only alarms.
+
+The SiS5595 only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
+
+Problems
+--------
+Some chips refuse to be enabled. We don't know why.
+The driver will recognize this and print a message in dmesg.
diff --git a/Documentation/hwmon/sl28cpld.rst b/Documentation/hwmon/sl28cpld.rst
new file mode 100644
index 000000000..7ed65f782
--- /dev/null
+++ b/Documentation/hwmon/sl28cpld.rst
@@ -0,0 +1,36 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver sl28cpld
+======================
+
+Supported chips:
+
+ * Kontron sl28cpld
+
+ Prefix: 'sl28cpld'
+
+ Datasheet: not available
+
+Authors: Michael Walle <michael@walle.cc>
+
+Description
+-----------
+
+The sl28cpld is a board management controller which also exposes a hardware
+monitoring controller. At the moment this controller supports a single fan
+supervisor. In the future there might be other flavours and additional
+hardware monitoring might be supported.
+
+The fan supervisor has a 7 bit counter register and a counter period of 1
+second. If the 7 bit counter overflows, the supervisor will automatically
+switch to x8 mode to support a wider input range at the loss of
+granularity.
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= ========================================================
+fan1_input Fan RPM. Assuming 2 pulses per revolution.
+======================= ========================================================
diff --git a/Documentation/hwmon/smm665.rst b/Documentation/hwmon/smm665.rst
new file mode 100644
index 000000000..a0e27f62b
--- /dev/null
+++ b/Documentation/hwmon/smm665.rst
@@ -0,0 +1,187 @@
+Kernel driver smm665
+====================
+
+Supported chips:
+
+ * Summit Microelectronics SMM465
+
+ Prefix: 'smm465'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://www.summitmicro.com/prod_select/summary/SMM465/SMM465DS.pdf
+
+ * Summit Microelectronics SMM665, SMM665B
+
+ Prefix: 'smm665'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf
+
+ * Summit Microelectronics SMM665C
+
+ Prefix: 'smm665c'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://www.summitmicro.com/prod_select/summary/SMM665C/SMM665C_2125.pdf
+
+ * Summit Microelectronics SMM764
+
+ Prefix: 'smm764'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ http://www.summitmicro.com/prod_select/summary/SMM764/SMM764_2098.pdf
+
+ * Summit Microelectronics SMM766, SMM766B
+
+ Prefix: 'smm766'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf
+
+ http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Module Parameters
+-----------------
+
+* vref: int
+ Default: 1250 (mV)
+
+ Reference voltage on VREF_ADC pin in mV. It should not be necessary to set
+ this parameter unless a non-default reference voltage is used.
+
+
+Description
+-----------
+
+[From datasheet] The SMM665 is an Active DC Output power supply Controller
+that monitors, margins and cascade sequences power. The part monitors six
+power supply channels as well as VDD, 12V input, two general-purpose analog
+inputs and an internal temperature sensor using a 10-bit ADC.
+
+Each monitored channel has its own high and low limits, plus a critical
+limit.
+
+Support for SMM465, SMM764, and SMM766 has been implemented but is untested.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for devices, since there is no register which
+can be safely used to identify the chip. You will have to instantiate
+the devices explicitly. When instantiating the device, you have to specify
+its configuration register address.
+
+Example: the following will load the driver for an SMM665 at address 0x57
+on I2C bus #1::
+
+ $ modprobe smm665
+ $ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+This driver uses the values in the datasheet to convert ADC register values
+into the values specified in the sysfs-interface document. All attributes are
+read only.
+
+Min, max, lcrit, and crit values are used by the chip to trigger external signals
+and/or other activity. Triggered signals can include HEALTHY, RST, Power Off,
+or Fault depending on the chip configuration. The driver reports values as lcrit
+or crit if exceeding the limits triggers RST, Power Off, or Fault, and as min or
+max otherwise. For details please see the SMM665 datasheet.
+
+For SMM465 and SMM764, values for Channel E and F are reported but undefined.
+
+======================= =======================================================
+in1_input 12V input voltage (mV)
+in2_input 3.3V (VDD) input voltage (mV)
+in3_input Channel A voltage (mV)
+in4_input Channel B voltage (mV)
+in5_input Channel C voltage (mV)
+in6_input Channel D voltage (mV)
+in7_input Channel E voltage (mV)
+in8_input Channel F voltage (mV)
+in9_input AIN1 voltage (mV)
+in10_input AIN2 voltage (mV)
+
+in1_min 12v input minimum voltage (mV)
+in2_min 3.3V (VDD) input minimum voltage (mV)
+in3_min Channel A minimum voltage (mV)
+in4_min Channel B minimum voltage (mV)
+in5_min Channel C minimum voltage (mV)
+in6_min Channel D minimum voltage (mV)
+in7_min Channel E minimum voltage (mV)
+in8_min Channel F minimum voltage (mV)
+in9_min AIN1 minimum voltage (mV)
+in10_min AIN2 minimum voltage (mV)
+
+in1_max 12v input maximum voltage (mV)
+in2_max 3.3V (VDD) input maximum voltage (mV)
+in3_max Channel A maximum voltage (mV)
+in4_max Channel B maximum voltage (mV)
+in5_max Channel C maximum voltage (mV)
+in6_max Channel D maximum voltage (mV)
+in7_max Channel E maximum voltage (mV)
+in8_max Channel F maximum voltage (mV)
+in9_max AIN1 maximum voltage (mV)
+in10_max AIN2 maximum voltage (mV)
+
+in1_lcrit 12v input critical minimum voltage (mV)
+in2_lcrit 3.3V (VDD) input critical minimum voltage (mV)
+in3_lcrit Channel A critical minimum voltage (mV)
+in4_lcrit Channel B critical minimum voltage (mV)
+in5_lcrit Channel C critical minimum voltage (mV)
+in6_lcrit Channel D critical minimum voltage (mV)
+in7_lcrit Channel E critical minimum voltage (mV)
+in8_lcrit Channel F critical minimum voltage (mV)
+in9_lcrit AIN1 critical minimum voltage (mV)
+in10_lcrit AIN2 critical minimum voltage (mV)
+
+in1_crit 12v input critical maximum voltage (mV)
+in2_crit 3.3V (VDD) input critical maximum voltage (mV)
+in3_crit Channel A critical maximum voltage (mV)
+in4_crit Channel B critical maximum voltage (mV)
+in5_crit Channel C critical maximum voltage (mV)
+in6_crit Channel D critical maximum voltage (mV)
+in7_crit Channel E critical maximum voltage (mV)
+in8_crit Channel F critical maximum voltage (mV)
+in9_crit AIN1 critical maximum voltage (mV)
+in10_crit AIN2 critical maximum voltage (mV)
+
+in1_crit_alarm 12v input critical alarm
+in2_crit_alarm 3.3V (VDD) input critical alarm
+in3_crit_alarm Channel A critical alarm
+in4_crit_alarm Channel B critical alarm
+in5_crit_alarm Channel C critical alarm
+in6_crit_alarm Channel D critical alarm
+in7_crit_alarm Channel E critical alarm
+in8_crit_alarm Channel F critical alarm
+in9_crit_alarm AIN1 critical alarm
+in10_crit_alarm AIN2 critical alarm
+
+temp1_input Chip temperature
+temp1_min Mimimum chip temperature
+temp1_max Maximum chip temperature
+temp1_crit Critical chip temperature
+temp1_crit_alarm Temperature critical alarm
+======================= =======================================================
diff --git a/Documentation/hwmon/smsc47b397.rst b/Documentation/hwmon/smsc47b397.rst
new file mode 100644
index 000000000..600194cf1
--- /dev/null
+++ b/Documentation/hwmon/smsc47b397.rst
@@ -0,0 +1,197 @@
+Kernel driver smsc47b397
+========================
+
+Supported chips:
+
+ * SMSC LPC47B397-NC
+
+ * SMSC SCH5307-NS
+
+ * SMSC SCH5317
+
+ Prefix: 'smsc47b397'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: In this file
+
+Authors:
+
+ - Mark M. Hoffman <mhoffman@lightlink.com>
+ - Utilitek Systems, Inc.
+
+November 23, 2004
+
+The following specification describes the SMSC LPC47B397-NC [1]_ sensor chip
+(for which there is no public datasheet available). This document was
+provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
+by Mark M. Hoffman <mhoffman@lightlink.com>.
+
+.. [1] And SMSC SCH5307-NS and SCH5317, which have different device IDs but are
+ otherwise compatible.
+
+-------------------------------------------------------------------------
+
+Methods for detecting the HP SIO and reading the thermal data on a dc7100
+-------------------------------------------------------------------------
+
+The thermal information on the dc7100 is contained in the SIO Hardware Monitor
+(HWM). The information is accessed through an index/data pair. The index/data
+pair is located at the HWM Base Address + 0 and the HWM Base Address + 1. The
+HWM Base address can be obtained from Logical Device 8, registers 0x60 (MSB)
+and 0x61 (LSB). Currently we are using 0x480 for the HWM Base Address and
+0x480 and 0x481 for the index/data pair.
+
+Reading temperature information.
+The temperature information is located in the following registers:
+
+=============== ======= =======================================================
+Temp1 0x25 (Currently, this reflects the CPU temp on all systems).
+Temp2 0x26
+Temp3 0x27
+Temp4 0x80
+=============== ======= =======================================================
+
+Programming Example
+The following is an example of how to read the HWM temperature registers::
+
+ MOV DX,480H
+ MOV AX,25H
+ OUT DX,AL
+ MOV DX,481H
+ IN AL,DX
+
+AL contains the data in hex, the temperature in Celsius is the decimal
+equivalent.
+
+Ex: If AL contains 0x2A, the temperature is 42 degrees C.
+
+Reading tach information.
+The fan speed information is located in the following registers:
+
+=============== ======= ======= =================================
+ LSB MSB
+Tach1 0x28 0x29 (Currently, this reflects the CPU
+ fan speed on all systems).
+Tach2 0x2A 0x2B
+Tach3 0x2C 0x2D
+Tach4 0x2E 0x2F
+=============== ======= ======= =================================
+
+.. Important::
+
+ Reading the tach LSB locks the tach MSB.
+ The LSB Must be read first.
+
+How to convert the tach reading to RPM
+--------------------------------------
+
+The tach reading (TCount) is given by: (Tach MSB * 256) + (Tach LSB)
+The SIO counts the number of 90kHz (11.111us) pulses per revolution.
+RPM = 60/(TCount * 11.111us)
+
+Example::
+
+ Reg 0x28 = 0x9B
+ Reg 0x29 = 0x08
+
+TCount = 0x89B = 2203
+
+RPM = 60 / (2203 * 11.11111 E-6) = 2451 RPM
+
+Obtaining the SIO version.
+
+Configuration Sequence
+----------------------
+
+To program the configuration registers, the following sequence must be followed:
+1. Enter Configuration Mode
+2. Configure the Configuration Registers
+3. Exit Configuration Mode.
+
+Enter Configuration Mode
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+To place the chip into the Configuration State The config key (0x55) is written
+to the CONFIG PORT (0x2E).
+
+Configuration Mode
+^^^^^^^^^^^^^^^^^^
+
+In configuration mode, the INDEX PORT is located at the CONFIG PORT address and
+the DATA PORT is at INDEX PORT address + 1.
+
+The desired configuration registers are accessed in two steps:
+
+a. Write the index of the Logical Device Number Configuration Register
+ (i.e., 0x07) to the INDEX PORT and then write the number of the
+ desired logical device to the DATA PORT.
+
+b. Write the address of the desired configuration register within the
+ logical device to the INDEX PORT and then write or read the config-
+ uration register through the DATA PORT.
+
+Note:
+ If accessing the Global Configuration Registers, step (a) is not required.
+
+Exit Configuration Mode
+^^^^^^^^^^^^^^^^^^^^^^^
+
+To exit the Configuration State the write 0xAA to the CONFIG PORT (0x2E).
+The chip returns to the RUN State. (This is important).
+
+Programming Example
+^^^^^^^^^^^^^^^^^^^
+
+The following is an example of how to read the SIO Device ID located at 0x20:
+
+ ; ENTER CONFIGURATION MODE
+ MOV DX,02EH
+ MOV AX,055H
+ OUT DX,AL
+ ; GLOBAL CONFIGURATION REGISTER
+ MOV DX,02EH
+ MOV AL,20H
+ OUT DX,AL
+ ; READ THE DATA
+ MOV DX,02FH
+ IN AL,DX
+ ; EXIT CONFIGURATION MODE
+ MOV DX,02EH
+ MOV AX,0AAH
+ OUT DX,AL
+
+The registers of interest for identifying the SIO on the dc7100 are Device ID
+(0x20) and Device Rev (0x21).
+
+The Device ID will read 0x6F (0x81 for SCH5307-NS, and 0x85 for SCH5317)
+The Device Rev currently reads 0x01
+
+Obtaining the HWM Base Address
+------------------------------
+
+The following is an example of how to read the HWM Base Address located in
+Logical Device 8::
+
+ ; ENTER CONFIGURATION MODE
+ MOV DX,02EH
+ MOV AX,055H
+ OUT DX,AL
+ ; CONFIGURE REGISTER CRE0,
+ ; LOGICAL DEVICE 8
+ MOV DX,02EH
+ MOV AL,07H
+ OUT DX,AL ;Point to LD# Config Reg
+ MOV DX,02FH
+ MOV AL, 08H
+ OUT DX,AL;Point to Logical Device 8
+ ;
+ MOV DX,02EH
+ MOV AL,60H
+ OUT DX,AL ; Point to HWM Base Addr MSB
+ MOV DX,02FH
+ IN AL,DX ; Get MSB of HWM Base Addr
+ ; EXIT CONFIGURATION MODE
+ MOV DX,02EH
+ MOV AX,0AAH
+ OUT DX,AL
diff --git a/Documentation/hwmon/smsc47m1.rst b/Documentation/hwmon/smsc47m1.rst
new file mode 100644
index 000000000..c54eabd5e
--- /dev/null
+++ b/Documentation/hwmon/smsc47m1.rst
@@ -0,0 +1,86 @@
+Kernel driver smsc47m1
+======================
+
+Supported chips:
+
+ * SMSC LPC47B27x, LPC47M112, LPC47M10x, LPC47M13x, LPC47M14x,
+
+ LPC47M15x and LPC47M192
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Prefix: 'smsc47m1'
+
+ Datasheets:
+
+ http://www.smsc.com/media/Downloads_Public/Data_Sheets/47b272.pdf
+
+ http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m10x.pdf
+
+ http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m112.pdf
+
+ http://www.smsc.com/
+
+ * SMSC LPC47M292
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Prefix: 'smsc47m2'
+
+ Datasheet: Not public
+
+ * SMSC LPC47M997
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Prefix: 'smsc47m1'
+
+ Datasheet: none
+
+
+
+Authors:
+
+ - Mark D. Studebaker <mdsxyz123@yahoo.com>,
+ - With assistance from Bruce Allen <ballen@uwm.edu>, and his
+ fan.c program:
+
+ - http://www.lsc-group.phys.uwm.edu/%7Eballen/driver/
+
+ - Gabriele Gorla <gorlik@yahoo.com>,
+ - Jean Delvare <jdelvare@suse.de>
+
+Description
+-----------
+
+The Standard Microsystems Corporation (SMSC) 47M1xx Super I/O chips
+contain monitoring and PWM control circuitry for two fans.
+
+The LPC47M15x, LPC47M192 and LPC47M292 chips contain a full 'hardware
+monitoring block' in addition to the fan monitoring and control. The
+hardware monitoring block is not supported by this driver, use the
+smsc47m192 driver for that.
+
+No documentation is available for the 47M997, but it has the same device
+ID as the 47M15x and 47M192 chips and seems to be compatible.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+PWM values are from 0 to 255.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.5 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+------------------------------------------------------------------
+
+The lm_sensors project gratefully acknowledges the support of
+Intel in the development of this driver.
diff --git a/Documentation/hwmon/smsc47m192.rst b/Documentation/hwmon/smsc47m192.rst
new file mode 100644
index 000000000..a2e86ab67
--- /dev/null
+++ b/Documentation/hwmon/smsc47m192.rst
@@ -0,0 +1,116 @@
+Kernel driver smsc47m192
+========================
+
+Supported chips:
+
+ * SMSC LPC47M192, LPC47M15x, LPC47M292 and LPC47M997
+
+ Prefix: 'smsc47m192'
+
+ Addresses scanned: I2C 0x2c - 0x2d
+
+ Datasheet: The datasheet for LPC47M192 is publicly available from
+
+ http://www.smsc.com/
+
+ The LPC47M15x, LPC47M292 and LPC47M997 are compatible for
+
+ hardware monitoring.
+
+
+
+Author:
+ - Hartmut Rick <linux@rick.claranet.de>
+
+ - Special thanks to Jean Delvare for careful checking
+ of the code and many helpful comments and suggestions.
+
+
+Description
+-----------
+
+This driver implements support for the hardware sensor capabilities
+of the SMSC LPC47M192 and compatible Super-I/O chips.
+
+These chips support 3 temperature channels and 8 voltage inputs
+as well as CPU voltage VID input.
+
+They do also have fan monitoring and control capabilities, but the
+these features are accessed via ISA bus and are not supported by this
+driver. Use the 'smsc47m1' driver for fan monitoring and control.
+
+Voltages and temperatures are measured by an 8-bit ADC, the resolution
+of the temperatures is 1 bit per degree C.
+Voltages are scaled such that the nominal voltage corresponds to
+192 counts, i.e. 3/4 of the full range. Thus the available range for
+each voltage channel is 0V ... 255/192*(nominal voltage), the resolution
+is 1 bit per (nominal voltage)/192.
+Both voltage and temperature values are scaled by 1000, the sys files
+show voltages in mV and temperatures in units of 0.001 degC.
+
+The +12V analog voltage input channel (in4_input) is multiplexed with
+bit 4 of the encoded CPU voltage. This means that you either get
+a +12V voltage measurement or a 5 bit CPU VID, but not both.
+The default setting is to use the pin as 12V input, and use only 4 bit VID.
+This driver assumes that the information in the configuration register
+is correct, i.e. that the BIOS has updated the configuration if
+the motherboard has this input wired to VID4.
+
+The temperature and voltage readings are updated once every 1.5 seconds.
+Reading them more often repeats the same values.
+
+
+sysfs interface
+---------------
+
+===================== ==========================================================
+in0_input +2.5V voltage input
+in1_input CPU voltage input (nominal 2.25V)
+in2_input +3.3V voltage input
+in3_input +5V voltage input
+in4_input +12V voltage input (may be missing if used as VID4)
+in5_input Vcc voltage input (nominal 3.3V)
+ This is the supply voltage of the sensor chip itself.
+in6_input +1.5V voltage input
+in7_input +1.8V voltage input
+
+in[0-7]_min,
+in[0-7]_max lower and upper alarm thresholds for in[0-7]_input reading
+
+ All voltages are read and written in mV.
+
+in[0-7]_alarm alarm flags for voltage inputs
+ These files read '1' in case of alarm, '0' otherwise.
+
+temp1_input chip temperature measured by on-chip diode
+temp[2-3]_input temperature measured by external diodes (one of these
+ would typically be wired to the diode inside the CPU)
+
+temp[1-3]_min,
+temp[1-3]_max lower and upper alarm thresholds for temperatures
+
+temp[1-3]_offset temperature offset registers
+ The chip adds the offsets stored in these registers to
+ the corresponding temperature readings.
+ Note that temp1 and temp2 offsets share the same register,
+ they cannot both be different from zero at the same time.
+ Writing a non-zero number to one of them will reset the other
+ offset to zero.
+
+ All temperatures and offsets are read and written in
+ units of 0.001 degC.
+
+temp[1-3]_alarm alarm flags for temperature inputs, '1' in case of alarm,
+ '0' otherwise.
+temp[2-3]_input_fault diode fault flags for temperature inputs 2 and 3.
+ A fault is detected if the two pins for the corresponding
+ sensor are open or shorted, or any of the two is shorted
+ to ground or Vcc. '1' indicates a diode fault.
+
+cpu0_vid CPU voltage as received from the CPU
+
+vrm CPU VID standard used for decoding CPU voltage
+===================== ==========================================================
+
+The `*_min`, `*_max`, `*_offset` and `vrm` files can be read and written,
+all others are read-only.
diff --git a/Documentation/hwmon/sparx5-temp.rst b/Documentation/hwmon/sparx5-temp.rst
new file mode 100644
index 000000000..014080908
--- /dev/null
+++ b/Documentation/hwmon/sparx5-temp.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Microchip SparX-5 SoC
+=====================
+
+Supported chips:
+
+ * VSC7546, VSC7549, VSC755, VSC7556, and VSC7558 (Sparx5 series)
+
+ Prefix: 'sparx5-temp'
+
+ Addresses scanned: -
+
+ Datasheet: Provided by Microchip upon request and under NDA
+
+Author: Lars Povlsen <lars.povlsen@microchip.com>
+
+Description
+-----------
+
+The Sparx5 SoC contains a temperature sensor based on the MR74060
+Moortec IP.
+
+The sensor has a range of -40°C to +125°C and an accuracy of +/-5°C.
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= ========================================================
+temp1_input Die temperature (in millidegree Celsius.)
+======================= ========================================================
diff --git a/Documentation/hwmon/stpddc60.rst b/Documentation/hwmon/stpddc60.rst
new file mode 100644
index 000000000..7f7ce7f78
--- /dev/null
+++ b/Documentation/hwmon/stpddc60.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver stpddc60
+======================
+
+Supported chips:
+
+ * ST STPDDC60
+
+ Prefix: 'stpddc60', 'bmr481'
+
+ Addresses scanned: -
+
+ Datasheet: https://flexpowermodules.com/documents/fpm-techspec-bmr481
+
+Author: Erik Rosen <erik.rosen@metormote.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for ST STPDDC60 controller chip and
+compatible modules.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+The vout under- and over-voltage limits are set in relation to the commanded
+output voltage as a positive or negative offset in the interval 50mV to 400mV
+in 50mV steps. This means that the absolute values of the limits will change
+when the commanded output voltage changes. Also, care should be taken when
+writing to those limits since in the worst case the commanded output voltage
+could change at the same time as the limit is written to, wich will lead to
+unpredictable results.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Vin, iout, pout and temp limits
+are read-write; all other attributes are read-only.
+
+======================= ========================================================
+in1_label "vin"
+in1_input Measured input voltage.
+in1_lcrit Critical minimum input voltage.
+in1_crit Critical maximum input voltage.
+in1_lcrit_alarm Input voltage critical low alarm.
+in1_crit_alarm Input voltage critical high alarm.
+
+in2_label "vout1"
+in2_input Measured output voltage.
+in2_lcrit Critical minimum output voltage.
+in2_crit Critical maximum output voltage.
+in2_lcrit_alarm Critical output voltage critical low alarm.
+in2_crit_alarm Critical output voltage critical high alarm.
+
+curr1_label "iout1"
+curr1_input Measured output current.
+curr1_max Maximum output current.
+curr1_max_alarm Output current high alarm.
+curr1_crit Critical maximum output current.
+curr1_crit_alarm Output current critical high alarm.
+
+power1_label "pout1"
+power1_input Measured output power.
+power1_crit Critical maximum output power.
+power1_crit_alarm Output power critical high alarm.
+
+temp1_input Measured maximum temperature of all phases.
+temp1_max Maximum temperature limit.
+temp1_max_alarm High temperature alarm.
+temp1_crit Critical maximum temperature limit.
+temp1_crit_alarm Critical maximum temperature alarm.
+======================= ========================================================
diff --git a/Documentation/hwmon/submitting-patches.rst b/Documentation/hwmon/submitting-patches.rst
new file mode 100644
index 000000000..d953ee763
--- /dev/null
+++ b/Documentation/hwmon/submitting-patches.rst
@@ -0,0 +1,149 @@
+How to Get Your Patch Accepted Into the Hwmon Subsystem
+=======================================================
+
+This text is a collection of suggestions for people writing patches or
+drivers for the hwmon subsystem. Following these suggestions will greatly
+increase the chances of your change being accepted.
+
+
+1. General
+----------
+
+* It should be unnecessary to mention, but please read and follow:
+
+ - Documentation/process/submit-checklist.rst
+ - Documentation/process/submitting-patches.rst
+ - Documentation/process/coding-style.rst
+
+* Please run your patch through 'checkpatch --strict'. There should be no
+ errors, no warnings, and few if any check messages. If there are any
+ messages, please be prepared to explain.
+
+* Please use the standard multi-line comment style. Do not mix C and C++
+ style comments in a single driver (with the exception of the SPDX license
+ identifier).
+
+* If your patch generates checkpatch errors, warnings, or check messages,
+ please refrain from explanations such as "I prefer that coding style".
+ Keep in mind that each unnecessary message helps hiding a real problem,
+ and a consistent coding style makes it easier for others to understand
+ and review the code.
+
+* Please test your patch thoroughly. We are not your test group.
+ Sometimes a patch can not or not completely be tested because of missing
+ hardware. In such cases, you should test-build the code on at least one
+ architecture. If run-time testing was not achieved, it should be written
+ explicitly below the patch header.
+
+* If your patch (or the driver) is affected by configuration options such as
+ CONFIG_SMP, make sure it compiles for all configuration variants.
+
+
+2. Adding functionality to existing drivers
+-------------------------------------------
+
+* Make sure the documentation in Documentation/hwmon/<driver_name>.rst is up to
+ date.
+
+* Make sure the information in Kconfig is up to date.
+
+* If the added functionality requires some cleanup or structural changes, split
+ your patch into a cleanup part and the actual addition. This makes it easier
+ to review your changes, and to bisect any resulting problems.
+
+* Never mix bug fixes, cleanup, and functional enhancements in a single patch.
+
+
+3. New drivers
+--------------
+
+* Running your patch or driver file(s) through checkpatch does not mean its
+ formatting is clean. If unsure about formatting in your new driver, run it
+ through Lindent. Lindent is not perfect, and you may have to do some minor
+ cleanup, but it is a good start.
+
+* Consider adding yourself to MAINTAINERS.
+
+* Document the driver in Documentation/hwmon/<driver_name>.rst.
+
+* Add the driver to Kconfig and Makefile in alphabetical order.
+
+* Make sure that all dependencies are listed in Kconfig.
+
+* Please list include files in alphabetic order.
+
+* Please align continuation lines with '(' on the previous line.
+
+* Avoid forward declarations if you can. Rearrange the code if necessary.
+
+* Avoid macros to generate groups of sensor attributes. It not only confuses
+ checkpatch, but also makes it more difficult to review the code.
+
+* Avoid calculations in macros and macro-generated functions. While such macros
+ may save a line or so in the source, it obfuscates the code and makes code
+ review more difficult. It may also result in code which is more complicated
+ than necessary. Use inline functions or just regular functions instead.
+
+* Limit the number of kernel log messages. In general, your driver should not
+ generate an error message just because a runtime operation failed. Report
+ errors to user space instead, using an appropriate error code. Keep in mind
+ that kernel error log messages not only fill up the kernel log, but also are
+ printed synchronously, most likely with interrupt disabled, often to a serial
+ console. Excessive logging can seriously affect system performance.
+
+* Use devres functions whenever possible to allocate resources. For rationale
+ and supported functions, please see Documentation/driver-api/driver-model/devres.rst.
+ If a function is not supported by devres, consider using devm_add_action().
+
+* If the driver has a detect function, make sure it is silent. Debug messages
+ and messages printed after a successful detection are acceptable, but it
+ must not print messages such as "Chip XXX not found/supported".
+
+ Keep in mind that the detect function will run for all drivers supporting an
+ address if a chip is detected on that address. Unnecessary messages will just
+ pollute the kernel log and not provide any value.
+
+* Provide a detect function if and only if a chip can be detected reliably.
+
+* Only the following I2C addresses shall be probed: 0x18-0x1f, 0x28-0x2f,
+ 0x48-0x4f, 0x58, 0x5c, 0x73 and 0x77. Probing other addresses is strongly
+ discouraged as it is known to cause trouble with other (non-hwmon) I2C
+ chips. If your chip lives at an address which can't be probed then the
+ device will have to be instantiated explicitly (which is always better
+ anyway.)
+
+* Avoid writing to chip registers in the detect function. If you have to write,
+ only do it after you have already gathered enough data to be certain that the
+ detection is going to be successful.
+
+ Keep in mind that the chip might not be what your driver believes it is, and
+ writing to it might cause a bad misconfiguration.
+
+* Make sure there are no race conditions in the probe function. Specifically,
+ completely initialize your chip and your driver first, then register with
+ the hwmon subsystem.
+
+* Use devm_hwmon_device_register_with_info() or, if your driver needs a remove
+ function, hwmon_device_register_with_info() to register your driver with the
+ hwmon subsystem. Try using devm_add_action() instead of a remove function if
+ possible. Do not use hwmon_device_register().
+
+* Your driver should be buildable as module. If not, please be prepared to
+ explain why it has to be built into the kernel.
+
+* Do not provide support for deprecated sysfs attributes.
+
+* Do not create non-standard attributes unless really needed. If you have to use
+ non-standard attributes, or you believe you do, discuss it on the mailing list
+ first. Either case, provide a detailed explanation why you need the
+ non-standard attribute(s).
+ Standard attributes are specified in Documentation/hwmon/sysfs-interface.rst.
+
+* When deciding which sysfs attributes to support, look at the chip's
+ capabilities. While we do not expect your driver to support everything the
+ chip may offer, it should at least support all limits and alarms.
+
+* Last but not least, please check if a driver for your chip already exists
+ before starting to write a new driver. Especially for temperature sensors,
+ new chips are often variants of previously released chips. In some cases,
+ a presumably new chip may simply have been relabeled.
diff --git a/Documentation/hwmon/sy7636a-hwmon.rst b/Documentation/hwmon/sy7636a-hwmon.rst
new file mode 100644
index 000000000..c85db7b32
--- /dev/null
+++ b/Documentation/hwmon/sy7636a-hwmon.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver sy7636a-hwmon
+===========================
+
+Supported chips:
+
+ * Silergy SY7636A PMIC
+
+
+Description
+-----------
+
+This driver adds hardware temperature reading support for
+the Silergy SY7636A PMIC.
+
+The following sensors are supported
+
+ * Temperature
+ - SoC on-die temperature in milli-degree C
+
+sysfs-Interface
+---------------
+
+temp0_input
+ - SoC on-die temperature (milli-degree C)
diff --git a/Documentation/hwmon/sysfs-interface.rst b/Documentation/hwmon/sysfs-interface.rst
new file mode 100644
index 000000000..209626fb2
--- /dev/null
+++ b/Documentation/hwmon/sysfs-interface.rst
@@ -0,0 +1,656 @@
+Naming and data format standards for sysfs files
+================================================
+
+The libsensors library offers an interface to the raw sensors data
+through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
+completely chip-independent. It assumes that all the kernel drivers
+implement the standard sysfs interface described in this document.
+This makes adding or updating support for any given chip very easy, as
+libsensors, and applications using it, do not need to be modified.
+This is a major improvement compared to lm-sensors 2.
+
+Note that motherboards vary widely in the connections to sensor chips.
+There is no standard that ensures, for example, that the second
+temperature sensor is connected to the CPU, or that the second fan is on
+the CPU. Also, some values reported by the chips need some computation
+before they make full sense. For example, most chips can only measure
+voltages between 0 and +4V. Other voltages are scaled back into that
+range using external resistors. Since the values of these resistors
+can change from motherboard to motherboard, the conversions cannot be
+hard coded into the driver and have to be done in user space.
+
+For this reason, even if we aim at a chip-independent libsensors, it will
+still require a configuration file (e.g. /etc/sensors.conf) for proper
+values conversion, labeling of inputs and hiding of unused inputs.
+
+An alternative method that some programs use is to access the sysfs
+files directly. This document briefly describes the standards that the
+drivers follow, so that an application program can scan for entries and
+access this data in a simple and consistent way. That said, such programs
+will have to implement conversion, labeling and hiding of inputs. For
+this reason, it is still not recommended to bypass the library.
+
+Each chip gets its own directory in the sysfs /sys/devices tree. To
+find all sensor chips, it is easier to follow the device symlinks from
+`/sys/class/hwmon/hwmon*`.
+
+Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
+in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
+in the hwmon "class" device directory are also supported. Complex drivers
+(e.g. drivers for multifunction chips) may want to use this possibility to
+avoid namespace pollution. The only drawback will be that older versions of
+libsensors won't support the driver in question.
+
+All sysfs values are fixed point numbers.
+
+There is only one value per file, unlike the older /proc specification.
+The common scheme for files naming is: <type><number>_<item>. Usual
+types for sensor chips are "in" (voltage), "temp" (temperature) and
+"fan" (fan). Usual items are "input" (measured value), "max" (high
+threshold, "min" (low threshold). Numbering usually starts from 1,
+except for voltages which start from 0 (because most data sheets use
+this). A number is always used for elements that can be present more
+than once, even if there is a single element of the given type on the
+specific chip. Other files do not refer to a specific element, so
+they have a simple name, and no number.
+
+Alarms are direct indications read from the chips. The drivers do NOT
+make comparisons of readings to thresholds. This allows violations
+between readings to be caught and alarmed. The exact definition of an
+alarm (for example, whether a threshold must be met or must be exceeded
+to cause an alarm) is chip-dependent.
+
+When setting values of hwmon sysfs attributes, the string representation of
+the desired value must be written, note that strings which are not a number
+are interpreted as 0! For more on how written strings are interpreted see the
+"sysfs attribute writes interpretation" section at the end of this file.
+
+Attribute access
+----------------
+
+Hardware monitoring sysfs attributes are displayed by unrestricted userspace
+applications. For this reason, all standard ABI attributes shall be world
+readable. Writeable standard ABI attributes shall be writeable only for
+privileged users.
+
+-------------------------------------------------------------------------
+
+======= ===========================================
+`[0-*]` denotes any positive number starting from 0
+`[1-*]` denotes any positive number starting from 1
+RO read only value
+WO write only value
+RW read/write value
+======= ===========================================
+
+Read/write values may be read-only for some chips, depending on the
+hardware implementation.
+
+All entries (except name) are optional, and should only be created in a
+given driver if the chip has the feature.
+
+See Documentation/ABI/testing/sysfs-class-hwmon for a complete description
+of the attributes.
+
+*****************
+Global attributes
+*****************
+
+`name`
+ The chip name.
+
+`label`
+ A descriptive label that allows to uniquely identify a device
+ within the system.
+
+`update_interval`
+ The interval at which the chip will update readings.
+
+
+********
+Voltages
+********
+
+`in[0-*]_min`
+ Voltage min value.
+
+`in[0-*]_lcrit`
+ Voltage critical min value.
+
+`in[0-*]_max`
+ Voltage max value.
+
+`in[0-*]_crit`
+ Voltage critical max value.
+
+`in[0-*]_input`
+ Voltage input value.
+
+`in[0-*]_average`
+ Average voltage
+
+`in[0-*]_lowest`
+ Historical minimum voltage
+
+`in[0-*]_highest`
+ Historical maximum voltage
+
+`in[0-*]_reset_history`
+ Reset inX_lowest and inX_highest
+
+`in_reset_history`
+ Reset inX_lowest and inX_highest for all sensors
+
+`in[0-*]_label`
+ Suggested voltage channel label.
+
+`in[0-*]_enable`
+ Enable or disable the sensors.
+
+`cpu[0-*]_vid`
+ CPU core reference voltage.
+
+`vrm`
+ Voltage Regulator Module version number.
+
+`in[0-*]_rated_min`
+ Minimum rated voltage.
+
+`in[0-*]_rated_max`
+ Maximum rated voltage.
+
+Also see the Alarms section for status flags associated with voltages.
+
+
+****
+Fans
+****
+
+`fan[1-*]_min`
+ Fan minimum value
+
+`fan[1-*]_max`
+ Fan maximum value
+
+`fan[1-*]_input`
+ Fan input value.
+
+`fan[1-*]_div`
+ Fan divisor.
+
+`fan[1-*]_pulses`
+ Number of tachometer pulses per fan revolution.
+
+`fan[1-*]_target`
+ Desired fan speed
+
+`fan[1-*]_label`
+ Suggested fan channel label.
+
+`fan[1-*]_enable`
+ Enable or disable the sensors.
+
+Also see the Alarms section for status flags associated with fans.
+
+
+***
+PWM
+***
+
+`pwm[1-*]`
+ Pulse width modulation fan control.
+
+`pwm[1-*]_enable`
+ Fan speed control method:
+
+`pwm[1-*]_mode`
+ direct current or pulse-width modulation.
+
+`pwm[1-*]_freq`
+ Base PWM frequency in Hz.
+
+`pwm[1-*]_auto_channels_temp`
+ Select which temperature channels affect this PWM output in
+ auto mode.
+
+`pwm[1-*]_auto_point[1-*]_pwm` / `pwm[1-*]_auto_point[1-*]_temp` / `pwm[1-*]_auto_point[1-*]_temp_hyst`
+ Define the PWM vs temperature curve.
+
+`temp[1-*]_auto_point[1-*]_pwm` / `temp[1-*]_auto_point[1-*]_temp` / `temp[1-*]_auto_point[1-*]_temp_hyst`
+ Define the PWM vs temperature curve.
+
+There is a third case where trip points are associated to both PWM output
+channels and temperature channels: the PWM values are associated to PWM
+output channels while the temperature values are associated to temperature
+channels. In that case, the result is determined by the mapping between
+temperature inputs and PWM outputs. When several temperature inputs are
+mapped to a given PWM output, this leads to several candidate PWM values.
+The actual result is up to the chip, but in general the highest candidate
+value (fastest fan speed) wins.
+
+
+************
+Temperatures
+************
+
+`temp[1-*]_type`
+ Sensor type selection.
+
+`temp[1-*]_max`
+ Temperature max value.
+
+`temp[1-*]_min`
+ Temperature min value.
+
+`temp[1-*]_max_hyst`
+ Temperature hysteresis value for max limit.
+
+`temp[1-*]_min_hyst`
+ Temperature hysteresis value for min limit.
+
+`temp[1-*]_input`
+ Temperature input value.
+
+`temp[1-*]_crit`
+ Temperature critical max value, typically greater than
+ corresponding temp_max values.
+
+`temp[1-*]_crit_hyst`
+ Temperature hysteresis value for critical limit.
+
+`temp[1-*]_emergency`
+ Temperature emergency max value, for chips supporting more than
+ two upper temperature limits.
+
+`temp[1-*]_emergency_hyst`
+ Temperature hysteresis value for emergency limit.
+
+`temp[1-*]_lcrit`
+ Temperature critical min value, typically lower than
+ corresponding temp_min values.
+
+`temp[1-*]_lcrit_hyst`
+ Temperature hysteresis value for critical min limit.
+
+`temp[1-*]_offset`
+ Temperature offset which is added to the temperature reading
+ by the chip.
+
+`temp[1-*]_label`
+ Suggested temperature channel label.
+
+`temp[1-*]_lowest`
+ Historical minimum temperature
+
+`temp[1-*]_highest`
+ Historical maximum temperature
+
+`temp[1-*]_reset_history`
+ Reset temp_lowest and temp_highest
+
+`temp_reset_history`
+ Reset temp_lowest and temp_highest for all sensors
+
+`temp[1-*]_enable`
+ Enable or disable the sensors.
+
+`temp[1-*]_rated_min`
+ Minimum rated temperature.
+
+`temp[1-*]_rated_max`
+ Maximum rated temperature.
+
+Some chips measure temperature using external thermistors and an ADC, and
+report the temperature measurement as a voltage. Converting this voltage
+back to a temperature (or the other way around for limits) requires
+mathematical functions not available in the kernel, so the conversion
+must occur in user space. For these chips, all temp* files described
+above should contain values expressed in millivolt instead of millidegree
+Celsius. In other words, such temperature channels are handled as voltage
+channels by the driver.
+
+Also see the Alarms section for status flags associated with temperatures.
+
+
+********
+Currents
+********
+
+`curr[1-*]_max`
+ Current max value.
+
+`curr[1-*]_min`
+ Current min value.
+
+`curr[1-*]_lcrit`
+ Current critical low value
+
+`curr[1-*]_crit`
+ Current critical high value.
+
+`curr[1-*]_input`
+ Current input value.
+
+`curr[1-*]_average`
+ Average current use.
+
+`curr[1-*]_lowest`
+ Historical minimum current.
+
+`curr[1-*]_highest`
+ Historical maximum current.
+
+`curr[1-*]_reset_history`
+ Reset currX_lowest and currX_highest
+
+ WO
+
+`curr_reset_history`
+ Reset currX_lowest and currX_highest for all sensors.
+
+`curr[1-*]_enable`
+ Enable or disable the sensors.
+
+`curr[1-*]_rated_min`
+ Minimum rated current.
+
+`curr[1-*]_rated_max`
+ Maximum rated current.
+
+Also see the Alarms section for status flags associated with currents.
+
+*****
+Power
+*****
+
+`power[1-*]_average`
+ Average power use.
+
+`power[1-*]_average_interval`
+ Power use averaging interval.
+
+`power[1-*]_average_interval_max`
+ Maximum power use averaging interval.
+
+`power[1-*]_average_interval_min`
+ Minimum power use averaging interval.
+
+`power[1-*]_average_highest`
+ Historical average maximum power use
+
+`power[1-*]_average_lowest`
+ Historical average minimum power use
+
+`power[1-*]_average_max`
+ A poll notification is sent to `power[1-*]_average` when
+ power use rises above this value.
+
+`power[1-*]_average_min`
+ A poll notification is sent to `power[1-*]_average` when
+ power use sinks below this value.
+
+`power[1-*]_input`
+ Instantaneous power use.
+
+`power[1-*]_input_highest`
+ Historical maximum power use
+
+`power[1-*]_input_lowest`
+ Historical minimum power use.
+
+`power[1-*]_reset_history`
+ Reset input_highest, input_lowest, average_highest and
+ average_lowest.
+
+`power[1-*]_accuracy`
+ Accuracy of the power meter.
+
+`power[1-*]_cap`
+ If power use rises above this limit, the
+ system should take action to reduce power use.
+
+`power[1-*]_cap_hyst`
+ Margin of hysteresis built around capping and notification.
+
+`power[1-*]_cap_max`
+ Maximum cap that can be set.
+
+`power[1-*]_cap_min`
+ Minimum cap that can be set.
+
+`power[1-*]_max`
+ Maximum power.
+
+`power[1-*]_crit`
+ Critical maximum power.
+
+ If power rises to or above this limit, the
+ system is expected take drastic action to reduce
+ power consumption, such as a system shutdown or
+ a forced powerdown of some devices.
+
+ Unit: microWatt
+
+ RW
+
+`power[1-*]_enable`
+ Enable or disable the sensors.
+
+ When disabled the sensor read will return
+ -ENODATA.
+
+ - 1: Enable
+ - 0: Disable
+
+ RW
+
+`power[1-*]_rated_min`
+ Minimum rated power.
+
+ Unit: microWatt
+
+ RO
+
+`power[1-*]_rated_max`
+ Maximum rated power.
+
+ Unit: microWatt
+
+ RO
+
+Also see the Alarms section for status flags associated with power readings.
+
+******
+Energy
+******
+
+`energy[1-*]_input`
+ Cumulative energy use
+
+ Unit: microJoule
+
+ RO
+
+`energy[1-*]_enable`
+ Enable or disable the sensors.
+
+ When disabled the sensor read will return
+ -ENODATA.
+
+ - 1: Enable
+ - 0: Disable
+
+ RW
+
+********
+Humidity
+********
+
+`humidity[1-*]_input`
+ Humidity.
+
+`humidity[1-*]_enable`
+ Enable or disable the sensors.
+
+`humidity[1-*]_rated_min`
+ Minimum rated humidity.
+
+`humidity[1-*]_rated_max`
+ Maximum rated humidity.
+
+******
+Alarms
+******
+
+Each channel or limit may have an associated alarm file, containing a
+boolean value. 1 means than an alarm condition exists, 0 means no alarm.
+
+Usually a given chip will either use channel-related alarms, or
+limit-related alarms, not both. The driver should just reflect the hardware
+implementation.
+
++-------------------------------+-----------------------+
+| **`in[0-*]_alarm`, | Channel alarm |
+| `curr[1-*]_alarm`, | |
+| `power[1-*]_alarm`, | - 0: no alarm |
+| `fan[1-*]_alarm`, | - 1: alarm |
+| `temp[1-*]_alarm`** | |
+| | RO |
++-------------------------------+-----------------------+
+
+**OR**
+
++-------------------------------+-----------------------+
+| **`in[0-*]_min_alarm`, | Limit alarm |
+| `in[0-*]_max_alarm`, | |
+| `in[0-*]_lcrit_alarm`, | - 0: no alarm |
+| `in[0-*]_crit_alarm`, | - 1: alarm |
+| `curr[1-*]_min_alarm`, | |
+| `curr[1-*]_max_alarm`, | RO |
+| `curr[1-*]_lcrit_alarm`, | |
+| `curr[1-*]_crit_alarm`, | |
+| `power[1-*]_cap_alarm`, | |
+| `power[1-*]_max_alarm`, | |
+| `power[1-*]_crit_alarm`, | |
+| `fan[1-*]_min_alarm`, | |
+| `fan[1-*]_max_alarm`, | |
+| `temp[1-*]_min_alarm`, | |
+| `temp[1-*]_max_alarm`, | |
+| `temp[1-*]_lcrit_alarm`, | |
+| `temp[1-*]_crit_alarm`, | |
+| `temp[1-*]_emergency_alarm`** | |
++-------------------------------+-----------------------+
+
+Each input channel may have an associated fault file. This can be used
+to notify open diodes, unconnected fans etc. where the hardware
+supports it. When this boolean has value 1, the measurement for that
+channel should not be trusted.
+
+`fan[1-*]_fault` / `temp[1-*]_fault`
+ Input fault condition.
+
+Some chips also offer the possibility to get beeped when an alarm occurs:
+
+`beep_enable`
+ Master beep enable.
+
+`in[0-*]_beep`, `curr[1-*]_beep`, `fan[1-*]_beep`, `temp[1-*]_beep`,
+ Channel beep.
+
+In theory, a chip could provide per-limit beep masking, but no such chip
+was seen so far.
+
+Old drivers provided a different, non-standard interface to alarms and
+beeps. These interface files are deprecated, but will be kept around
+for compatibility reasons:
+
+`alarms`
+ Alarm bitmask.
+
+`beep_mask`
+ Bitmask for beep.
+
+
+*******************
+Intrusion detection
+*******************
+
+`intrusion[0-*]_alarm`
+ Chassis intrusion detection.
+
+`intrusion[0-*]_beep`
+ Chassis intrusion beep.
+
+****************************
+Average sample configuration
+****************************
+
+Devices allowing for reading {in,power,curr,temp}_average values may export
+attributes for controlling number of samples used to compute average.
+
++--------------+---------------------------------------------------------------+
+| samples | Sets number of average samples for all types of measurements. |
+| | |
+| | RW |
++--------------+---------------------------------------------------------------+
+| in_samples | Sets number of average samples for specific type of |
+| power_samples| measurements. |
+| curr_samples | |
+| temp_samples | Note that on some devices it won't be possible to set all of |
+| | them to different values so changing one might also change |
+| | some others. |
+| | |
+| | RW |
++--------------+---------------------------------------------------------------+
+
+sysfs attribute writes interpretation
+-------------------------------------
+
+hwmon sysfs attributes always contain numbers, so the first thing to do is to
+convert the input to a number, there are 2 ways todo this depending whether
+the number can be negative or not::
+
+ unsigned long u = simple_strtoul(buf, NULL, 10);
+ long s = simple_strtol(buf, NULL, 10);
+
+With buf being the buffer with the user input being passed by the kernel.
+Notice that we do not use the second argument of strto[u]l, and thus cannot
+tell when 0 is returned, if this was really 0 or is caused by invalid input.
+This is done deliberately as checking this everywhere would add a lot of
+code to the kernel.
+
+Notice that it is important to always store the converted value in an
+unsigned long or long, so that no wrap around can happen before any further
+checking.
+
+After the input string is converted to an (unsigned) long, the value should be
+checked if its acceptable. Be careful with further conversions on the value
+before checking it for validity, as these conversions could still cause a wrap
+around before the check. For example do not multiply the result, and only
+add/subtract if it has been divided before the add/subtract.
+
+What to do if a value is found to be invalid, depends on the type of the
+sysfs attribute that is being set. If it is a continuous setting like a
+tempX_max or inX_max attribute, then the value should be clamped to its
+limits using clamp_val(value, min_limit, max_limit). If it is not continuous
+like for example a tempX_type, then when an invalid value is written,
+-EINVAL should be returned.
+
+Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees)::
+
+ long v = simple_strtol(buf, NULL, 10) / 1000;
+ v = clamp_val(v, -128, 127);
+ /* write v to register */
+
+Example2, fan divider setting, valid values 2, 4 and 8::
+
+ unsigned long v = simple_strtoul(buf, NULL, 10);
+
+ switch (v) {
+ case 2: v = 1; break;
+ case 4: v = 2; break;
+ case 8: v = 3; break;
+ default:
+ return -EINVAL;
+ }
+ /* write v to register */
diff --git a/Documentation/hwmon/tc654.rst b/Documentation/hwmon/tc654.rst
new file mode 100644
index 000000000..ce546ee6d
--- /dev/null
+++ b/Documentation/hwmon/tc654.rst
@@ -0,0 +1,34 @@
+Kernel driver tc654
+===================
+
+Supported chips:
+
+ * Microchip TC654 and TC655
+
+ Prefix: 'tc654'
+ Datasheet: http://ww1.m
+ icrochip.com/downloads/en/DeviceDoc/20001734C.pdf
+
+Authors:
+ - Chris Packham <chris.packham@alliedtelesis.co.nz>
+ - Masahiko Iwamoto <iwamoto@allied-telesis.co.jp>
+
+Description
+-----------
+This driver implements support for the Microchip TC654 and TC655.
+
+The TC654 uses the 2-wire interface compatible with the SMBUS 2.0
+specification. The TC654 has two (2) inputs for measuring fan RPM and
+one (1) PWM output which can be used for fan control.
+
+Configuration Notes
+-------------------
+Ordinarily the pwm1_mode ABI is used for controlling the pwm output
+mode. However, for this chip the output is always pwm, and the
+pwm1_mode determines if the pwm output is controlled via the pwm1 value
+or via the Vin analog input.
+
+
+Setting pwm1_mode to 1 will cause the pwm output to be driven based on
+the pwm1 value. Setting pwm1_mode to 0 will cause the pwm output to be
+driven based on the Vin input.
diff --git a/Documentation/hwmon/tc74.rst b/Documentation/hwmon/tc74.rst
new file mode 100644
index 000000000..f1764211c
--- /dev/null
+++ b/Documentation/hwmon/tc74.rst
@@ -0,0 +1,23 @@
+Kernel driver tc74
+====================
+
+Supported chips:
+
+ * Microchip TC74
+
+ Prefix: 'tc74'
+
+ Datasheet: Publicly available at Microchip website.
+
+Description
+-----------
+
+Driver supports the above part.
+
+The tc74 has an 8-bit sensor, with 1 degree centigrade resolution
+and +- 2 degrees centigrade accuracy.
+
+Notes
+-----
+
+Currently entering low power standby mode is not supported.
diff --git a/Documentation/hwmon/thmc50.rst b/Documentation/hwmon/thmc50.rst
new file mode 100644
index 000000000..090f04029
--- /dev/null
+++ b/Documentation/hwmon/thmc50.rst
@@ -0,0 +1,89 @@
+Kernel driver thmc50
+=====================
+
+Supported chips:
+
+ * Analog Devices ADM1022
+
+ Prefix: 'adm1022'
+
+ Addresses scanned: I2C 0x2c - 0x2e
+
+ Datasheet: http://www.analog.com/en/prod/0,2877,ADM1022,00.html
+
+ * Texas Instruments THMC50
+
+ Prefix: 'thmc50'
+
+ Addresses scanned: I2C 0x2c - 0x2e
+
+ Datasheet: https://www.ti.com/
+
+
+Author: Krzysztof Helt <krzysztof.h1@wp.pl>
+
+This driver was derived from the 2.4 kernel thmc50.c source file.
+
+Credits:
+
+ thmc50.c (2.4 kernel):
+
+ - Frodo Looijaard <frodol@dds.nl>
+ - Philip Edelbrock <phil@netroedge.com>
+
+Module Parameters
+-----------------
+
+* adm1022_temp3: short array
+ List of adapter,address pairs to force chips into ADM1022 mode with
+ second remote temperature. This does not work for original THMC50 chips.
+
+Description
+-----------
+
+The THMC50 implements: an internal temperature sensor, support for an
+external diode-type temperature sensor (compatible w/ the diode sensor inside
+many processors), and a controllable fan/analog_out DAC. For the temperature
+sensors, limits can be set through the appropriate Overtemperature Shutdown
+register and Hysteresis register. Each value can be set and read to half-degree
+accuracy. An alarm is issued (usually to a connected LM78) when the
+temperature gets higher then the Overtemperature Shutdown value; it stays on
+until the temperature falls below the Hysteresis value. All temperatures are in
+degrees Celsius, and are guaranteed within a range of -55 to +125 degrees.
+
+The THMC50 only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
+
+The THMC50 is usually used in combination with LM78-like chips, to measure
+the temperature of the processor(s).
+
+The ADM1022 works the same as THMC50 but it is faster (5 Hz instead of
+1 Hz for THMC50). It can be also put in a new mode to handle additional
+remote temperature sensor. The driver use the mode set by BIOS by default.
+
+In case the BIOS is broken and the mode is set incorrectly, you can force
+the mode with additional remote temperature with adm1022_temp3 parameter.
+A typical symptom of wrong setting is a fan forced to full speed.
+
+Driver Features
+---------------
+
+The driver provides up to three temperatures:
+
+temp1
+ - internal
+temp2
+ - remote
+temp3
+ - 2nd remote only for ADM1022
+
+pwm1
+ - fan speed (0 = stop, 255 = full)
+pwm1_mode
+ - always 0 (DC mode)
+
+The value of 0 for pwm1 also forces FAN_OFF signal from the chip,
+so it stops fans even if the value 0 into the ANALOG_OUT register does not.
+
+The driver was tested on Compaq AP550 with two ADM1022 chips (one works
+in the temp3 mode), five temperature readings and two fans.
diff --git a/Documentation/hwmon/tmp102.rst b/Documentation/hwmon/tmp102.rst
new file mode 100644
index 000000000..b1f585531
--- /dev/null
+++ b/Documentation/hwmon/tmp102.rst
@@ -0,0 +1,31 @@
+Kernel driver tmp102
+====================
+
+Supported chips:
+
+ * Texas Instruments TMP102
+
+ Prefix: 'tmp102'
+
+ Addresses scanned: none
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html
+
+Author:
+
+ Steven King <sfking@fdwdc.com>
+
+Description
+-----------
+
+The Texas Instruments TMP102 implements one temperature sensor. Limits can be
+set through the Overtemperature Shutdown register and Hysteresis register. The
+sensor is accurate to 0.5 degree over the range of -25 to +85 C, and to 1.0
+degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
+operating temperature has a minimum of -55 C and a maximum of +150 C.
+
+The TMP102 has a programmable update rate that can select between 8, 4, 1, and
+0.5 Hz. (Currently the driver only supports the default of 4 Hz).
+
+The driver provides the common sysfs-interface for temperatures (see
+Documentation/hwmon/sysfs-interface.rst under Temperatures).
diff --git a/Documentation/hwmon/tmp103.rst b/Documentation/hwmon/tmp103.rst
new file mode 100644
index 000000000..b3ef81475
--- /dev/null
+++ b/Documentation/hwmon/tmp103.rst
@@ -0,0 +1,33 @@
+Kernel driver tmp103
+====================
+
+Supported chips:
+
+ * Texas Instruments TMP103
+
+ Prefix: 'tmp103'
+
+ Addresses scanned: none
+
+ Product info and datasheet: https://www.ti.com/product/tmp103
+
+Author:
+
+ Heiko Schocher <hs@denx.de>
+
+Description
+-----------
+
+The TMP103 is a digital output temperature sensor in a four-ball
+wafer chip-scale package (WCSP). The TMP103 is capable of reading
+temperatures to a resolution of 1°C. The TMP103 is specified for
+operation over a temperature range of -40°C to +125°C.
+
+Resolution: 8 Bits
+Accuracy: ±1°C Typ (-10°C to +100°C)
+
+The driver provides the common sysfs-interface for temperatures (see
+Documentation/hwmon/sysfs-interface.rst under Temperatures).
+
+Please refer how to instantiate this driver:
+Documentation/i2c/instantiating-devices.rst
diff --git a/Documentation/hwmon/tmp108.rst b/Documentation/hwmon/tmp108.rst
new file mode 100644
index 000000000..6df7cf1b4
--- /dev/null
+++ b/Documentation/hwmon/tmp108.rst
@@ -0,0 +1,41 @@
+Kernel driver tmp108
+====================
+
+Supported chips:
+
+ * Texas Instruments TMP108
+
+ Prefix: 'tmp108'
+
+ Addresses scanned: none
+
+ Datasheet: https://www.ti.com/product/tmp108
+
+Author:
+
+ John Muir <john@jmuir.com>
+
+Description
+-----------
+
+The Texas Instruments TMP108 implements one temperature sensor. An alert pin
+can be set when temperatures exceed minimum or maximum values plus or minus a
+hysteresis value. (This driver does not support interrupts for the alert pin,
+and the device runs in comparator mode.)
+
+The sensor is accurate to 0.75C over the range of -25 to +85 C, and to 1.0
+degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
+operating temperature has a minimum of -55 C and a maximum of +150 C.
+Hysteresis values can be set to 0, 1, 2, or 4C.
+
+The TMP108 has a programmable update rate that can select between 8, 4, 1, and
+0.5 Hz.
+
+By default the TMP108 reads the temperature continuously. To conserve power,
+the TMP108 has a one-shot mode where the device is normally shut-down. When a
+one shot is requested the temperature is read, the result can be retrieved,
+and then the device is shut down automatically. (This driver only supports
+continuous mode.)
+
+The driver provides the common sysfs-interface for temperatures (see
+Documentation/hwmon/sysfs-interface.rst under Temperatures).
diff --git a/Documentation/hwmon/tmp401.rst b/Documentation/hwmon/tmp401.rst
new file mode 100644
index 000000000..3aacf3d3b
--- /dev/null
+++ b/Documentation/hwmon/tmp401.rst
@@ -0,0 +1,80 @@
+Kernel driver tmp401
+====================
+
+Supported chips:
+
+ * Texas Instruments TMP401
+
+ Prefix: 'tmp401'
+
+ Addresses scanned: I2C 0x4c
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html
+
+ * Texas Instruments TMP411
+
+ Prefix: 'tmp411'
+
+ Addresses scanned: I2C 0x4c, 0x4d, 0x4e
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html
+
+ * Texas Instruments TMP431
+
+ Prefix: 'tmp431'
+
+ Addresses scanned: I2C 0x4c, 0x4d
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp431.html
+
+ * Texas Instruments TMP432
+
+ Prefix: 'tmp432'
+
+ Addresses scanned: I2C 0x4c, 0x4d
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
+
+ * Texas Instruments TMP435
+
+ Prefix: 'tmp435'
+
+ Addresses scanned: I2C 0x48 - 0x4f
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
+
+
+
+Authors:
+
+ - Hans de Goede <hdegoede@redhat.com>
+ - Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP401, TMP411,
+TMP431, TMP432, and TMP435 chips. These chips implement one or two
+remote and one local temperature sensors. Temperature is measured in degrees
+Celsius. Resolution of the remote sensor is 0.0625 degree. Local
+sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
+supported by the driver so far, so using the default resolution of 0.5
+degree).
+
+The driver provides the common sysfs-interface for temperatures (see
+Documentation/hwmon/sysfs-interface.rst under Temperatures).
+
+The TMP411 and TMP431 chips are compatible with TMP401. TMP411 provides
+some additional features.
+
+* Minimum and Maximum temperature measured since power-on, chip-reset
+
+ Exported via sysfs attributes tempX_lowest and tempX_highest.
+
+* Reset of historical minimum/maximum temperature measurements
+
+ Exported via sysfs attribute temp_reset_history. Writing 1 to this
+ file triggers a reset.
+
+TMP432 is compatible with TMP401 and TMP431. It supports two external
+temperature sensors.
diff --git a/Documentation/hwmon/tmp421.rst b/Documentation/hwmon/tmp421.rst
new file mode 100644
index 000000000..a3002117b
--- /dev/null
+++ b/Documentation/hwmon/tmp421.rst
@@ -0,0 +1,76 @@
+Kernel driver tmp421
+====================
+
+Supported chips:
+
+ * Texas Instruments TMP421
+
+ Prefix: 'tmp421'
+
+ Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
+
+ * Texas Instruments TMP422
+
+ Prefix: 'tmp422'
+
+ Addresses scanned: I2C 0x4c, 0x4d, 0x4e and 0x4f
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
+
+ * Texas Instruments TMP423
+
+ Prefix: 'tmp423'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
+
+ * Texas Instruments TMP441
+
+ Prefix: 'tmp441'
+
+ Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
+
+ Datasheet: https://www.ti.com/product/tmp441
+
+ * Texas Instruments TMP442
+
+ Prefix: 'tmp442'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: https://www.ti.com/product/tmp442
+
+Authors:
+
+ Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP421, TMP422,
+TMP423, TMP441, and TMP442 temperature sensor chips. These chips
+implement one local and up to one (TMP421, TMP441), up to two (TMP422,
+TMP442) or up to three (TMP423) remote sensors. Temperature is measured
+in degrees Celsius. The chips are wired over I2C/SMBus and specified
+over a temperature range of -40 to +125 degrees Celsius. Resolution
+for both the local and remote channels is 0.0625 degree C.
+
+The chips support only temperature measurement. The driver exports
+the temperature values via the following sysfs files:
+
+**temp[1-4]_input**
+
+**temp[2-4]_fault**
+
+Each sensor can be individually disabled via Devicetree or from sysfs
+via:
+
+**temp[1-4]_enable**
+
+If labels were specified in Devicetree, additional sysfs files will
+be present:
+
+**temp[1-4]_label**
diff --git a/Documentation/hwmon/tmp464.rst b/Documentation/hwmon/tmp464.rst
new file mode 100644
index 000000000..7596e7623
--- /dev/null
+++ b/Documentation/hwmon/tmp464.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver tmp464
+====================
+
+Supported chips:
+
+ * Texas Instruments TMP464
+
+ Prefix: 'tmp464'
+
+ Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp464.html
+
+ * Texas Instruments TMP468
+
+ Prefix: 'tmp468'
+
+ Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b
+
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp468.html
+
+Authors:
+
+ Agathe Porte <agathe.porte@nokia.com>
+ Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP464 and TMP468
+temperature sensor chips. TMP464 provides one local and four remote
+sensors. TMP468 provides one local and eight remote sensors.
+Temperature is measured in degrees Celsius. The chips are wired over
+I2C/SMBus and specified over a temperature range of -40 to +125 degrees
+Celsius. Resolution for both the local and remote channels is 0.0625
+degree C.
+
+The chips support only temperature measurements. The driver exports
+temperature values, limits, and alarms via the following sysfs files:
+
+**temp[1-9]_input**
+
+**temp[1-9]_max**
+
+**temp[1-9]_max_hyst**
+
+**temp[1-9]_max_alarm**
+
+**temp[1-9]_crit**
+
+**temp[1-9]_crit_alarm**
+
+**temp[1-9]_crit_hyst**
+
+**temp[2-9]_offset**
+
+**temp[2-9]_fault**
+
+Each sensor can be individually disabled via Devicetree or from sysfs
+via:
+
+**temp[1-9]_enable**
+
+If labels were specified in Devicetree, additional sysfs files will
+be present:
+
+**temp[1-9]_label**
+
+The update interval is configurable with the following sysfs attribute.
+
+**update_interval**
diff --git a/Documentation/hwmon/tmp513.rst b/Documentation/hwmon/tmp513.rst
new file mode 100644
index 000000000..f2dfc1677
--- /dev/null
+++ b/Documentation/hwmon/tmp513.rst
@@ -0,0 +1,103 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver tmp513
+====================
+
+Supported chips:
+
+ * Texas Instruments TMP512
+
+ Prefix: 'tmp512'
+
+ Datasheet: https://www.ti.com/lit/ds/symlink/tmp512.pdf
+
+ * Texas Instruments TMP513
+
+ Prefix: 'tmp513'
+
+ Datasheet: https://www.ti.com/lit/ds/symlink/tmp513.pdf
+
+Authors:
+
+ Eric Tremblay <etremblay@distech-controls.com>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP512, and TMP513.
+The TMP512 (dual-channel) and TMP513 (triple-channel) are system monitors
+that include remote sensors, a local temperature sensor, and a high-side current
+shunt monitor. These system monitors have the capability of measuring remote
+temperatures, on-chip temperatures, and system voltage/power/current
+consumption.
+
+The temperatures are measured in degrees Celsius with a range of
+-40 to + 125 degrees with a resolution of 0.0625 degree C.
+
+For hysteresis value, only the first channel is writable. Writing to it
+will affect all other values since each channels are sharing the same
+hysteresis value. The hysteresis is in degrees Celsius with a range of
+0 to 127.5 degrees with a resolution of 0.5 degree.
+
+The driver exports the temperature values via the following sysfs files:
+
+**temp[1-4]_input**
+
+**temp[1-4]_crit**
+
+**temp[1-4]_crit_alarm**
+
+**temp[1-4]_crit_hyst**
+
+The driver read the shunt voltage from the chip and convert it to current.
+The readable range depends on the "ti,pga-gain" property (default to 8) and the
+shunt resistor value. The value resolution will be equal to 10uV/Rshunt.
+
+The driver exports the shunt currents values via the following sysFs files:
+
+**curr1_input**
+
+**curr1_lcrit**
+
+**curr1_lcrit_alarm**
+
+**curr1_crit**
+
+**curr1_crit_alarm**
+
+The bus voltage range is read from the chip with a resolution of 4mV. The chip
+can be configurable in two different range (32V or 16V) using the
+ti,bus-range-microvolt property in the devicetree.
+
+The driver exports the bus voltage values via the following sysFs files:
+
+**in0_input**
+
+**in0_lcrit**
+
+**in0_lcrit_alarm**
+
+**in0_crit**
+
+**in0_crit_alarm**
+
+The bus power and bus currents range and resolution depends on the calibration
+register value. Those values are calculate by the hardware using those
+formulas:
+
+Current = (ShuntVoltage * CalibrationRegister) / 4096
+Power = (Current * BusVoltage) / 5000
+
+The driver exports the bus current and bus power values via the following
+sysFs files:
+
+**curr2_input**
+
+**power1_input**
+
+**power1_crit**
+
+**power1_crit_alarm**
+
+The calibration process follow the procedure of the datasheet (without overflow)
+and depend on the shunt resistor value and the pga_gain value.
diff --git a/Documentation/hwmon/tps23861.rst b/Documentation/hwmon/tps23861.rst
new file mode 100644
index 000000000..46d121ff3
--- /dev/null
+++ b/Documentation/hwmon/tps23861.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver tps23861
+======================
+
+Supported chips:
+ * Texas Instruments TPS23861
+
+ Prefix: 'tps23861'
+
+ Datasheet: https://www.ti.com/lit/gpn/tps23861
+
+Author: Robert Marko <robert.marko@sartura.hr>
+
+Description
+-----------
+
+This driver supports hardware monitoring for Texas Instruments TPS23861 PoE PSE.
+
+TPS23861 is a quad port IEEE802.3at PSE controller with optional I2C control
+and monitoring capabilities.
+
+TPS23861 offers three modes of operation: Auto, Semi-Auto and Manual.
+
+This driver only supports the Auto mode of operation providing monitoring
+as well as enabling/disabling the four ports.
+
+Sysfs entries
+-------------
+
+======================= =====================================================================
+in[0-3]_input Voltage on ports [1-4]
+in[0-3]_label "Port[1-4]"
+in4_input IC input voltage
+in4_label "Input"
+temp1_input IC die temperature
+temp1_label "Die"
+curr[1-4]_input Current on ports [1-4]
+in[1-4]_label "Port[1-4]"
+in[0-3]_enable Enable/disable ports [1-4]
+======================= =====================================================================
diff --git a/Documentation/hwmon/tps40422.rst b/Documentation/hwmon/tps40422.rst
new file mode 100644
index 000000000..32a62ccea
--- /dev/null
+++ b/Documentation/hwmon/tps40422.rst
@@ -0,0 +1,73 @@
+Kernel driver tps40422
+======================
+
+Supported chips:
+
+ * TI TPS40422
+
+ Prefix: 'tps40422'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.ti.com/lit/gpn/tps40422
+
+Author: Zhu Laiwen <richard.zhu@nsn.com>
+
+
+Description
+-----------
+
+This driver supports TI TPS40422 Dual-Output or Two-Phase Synchronous Buck
+Controller with PMBus
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported.
+
+======================= =======================================================
+in[1-2]_label "vout[1-2]"
+in[1-2]_input Measured voltage. From READ_VOUT register.
+in[1-2]_alarm voltage alarm.
+
+curr[1-2]_input Measured current. From READ_IOUT register.
+curr[1-2]_label "iout[1-2]"
+curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
+ register.
+curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT status.
+curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+curr2_alarm Current high alarm. From IOUT_OC_WARNING status.
+
+temp1_input Measured temperature. From READ_TEMPERATURE_2 register
+ on page 0.
+temp1_max Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm Chip temperature high alarm. Set by comparing
+ READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if
+ TEMP_OT_WARNING status is set.
+temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
+ READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if
+ TEMP_OT_FAULT status is set.
+temp2_input Measured temperature. From READ_TEMPERATURE_2 register
+ on page 1.
+temp2_alarm Chip temperature alarm on page 1.
+======================= =======================================================
diff --git a/Documentation/hwmon/tps53679.rst b/Documentation/hwmon/tps53679.rst
new file mode 100644
index 000000000..3b9561648
--- /dev/null
+++ b/Documentation/hwmon/tps53679.rst
@@ -0,0 +1,187 @@
+Kernel driver tps53679
+======================
+
+Supported chips:
+
+ * Texas Instruments TPS53647
+
+ Prefix: 'tps53647'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.ti.com/lit/gpn/tps53647
+
+ * Texas Instruments TPS53667
+
+ Prefix: 'tps53667'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.ti.com/lit/gpn/TPS53667
+
+ * Texas Instruments TPS53676
+
+ Prefix: 'tps53676'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.ti.com/lit/gpn/TPS53676
+
+ * Texas Instruments TPS53679
+
+ Prefix: 'tps53679'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.ti.com/lit/gpn/TPS53679 (short version)
+
+ * Texas Instruments TPS53681
+
+ Prefix: 'tps53681'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.ti.com/lit/gpn/TPS53681
+
+ * Texas Instruments TPS53688
+
+ Prefix: 'tps53688'
+
+ Addresses scanned: -
+
+ Datasheet: Available under NDA
+
+
+Authors:
+ Vadim Pasternak <vadimp@mellanox.com>
+ Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+Chips in this series are multi-phase step-down converters with one or two
+output channels and up to 8 phases per channel.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for an TPS53681 at address
+0x60 on I2C bus #1::
+
+ # modprobe tps53679
+ # echo tps53681 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs attributes
+----------------
+
+======================= ========================================================
+in1_label "vin"
+
+in1_input Measured input voltage.
+
+in1_lcrit Critical minimum input voltage
+
+ TPS53679, TPS53681, TPS53688 only.
+
+in1_lcrit_alarm Input voltage critical low alarm.
+
+ TPS53679, TPS53681, TPS53688 only.
+
+in1_crit Critical maximum input voltage.
+
+in1_crit_alarm Input voltage critical high alarm.
+
+in[N]_label "vout[1-2]"
+
+ - TPS53647, TPS53667: N=2
+ - TPS53679, TPS53588: N=2,3
+
+in[N]_input Measured output voltage.
+
+in[N]_lcrit Critical minimum input voltage.
+
+ TPS53679, TPS53681, TPS53688 only.
+
+in[N]_lcrit_alarm Critical minimum voltage alarm.
+
+ TPS53679, TPS53681, TPS53688 only.
+
+in[N]_alarm Output voltage alarm.
+
+ TPS53647, TPS53667 only.
+
+in[N]_crit Critical maximum output voltage.
+
+ TPS53679, TPS53681, TPS53688 only.
+
+in[N]_crit_alarm Output voltage critical high alarm.
+
+ TPS53679, TPS53681, TPS53688 only.
+
+temp[N]_input Measured temperature.
+
+ - TPS53647, TPS53667: N=1
+ - TPS53679, TPS53681, TPS53588: N=1,2
+
+temp[N]_max Maximum temperature.
+
+temp[N]_crit Critical high temperature.
+
+temp[N]_max_alarm Temperature high alarm.
+
+temp[N]_crit_alarm Temperature critical high alarm.
+
+power1_label "pin".
+
+power1_input Measured input power.
+
+power[N]_label "pout[1-2]".
+
+ - TPS53647, TPS53667: N=2
+ - TPS53676, TPS53679, TPS53681, TPS53588: N=2,3
+
+power[N]_input Measured output power.
+
+curr1_label "iin".
+
+curr1_input Measured input current.
+
+curr1_max Maximum input current.
+
+curr1_max_alarm Input current high alarm.
+
+curr1_crit Critical input current.
+
+curr1_crit_alarm Input current critical alarm.
+
+curr[N]_label "iout[1-2]" or "iout1.[0-5]".
+
+ The first digit is the output channel, the second
+ digit is the phase within the channel. Per-phase
+ telemetry supported on TPS53676 and TPS53681 only.
+
+ - TPS53647, TPS53667: N=2
+ - TPS53679, TPS53588: N=2,3
+ - TPS53676: N=2-8
+ - TPS53681: N=2-9
+
+curr[N]_input Measured output current.
+
+curr[N]_max Maximum output current.
+
+curr[N]_crit Critical high output current.
+
+curr[N]_max_alarm Output current high alarm.
+
+curr[N]_crit_alarm Output current critical high alarm.
+
+ Limit and alarm attributes are only available for
+ non-phase telemetry (iout1, iout2).
+
+======================= ========================================================
diff --git a/Documentation/hwmon/tps546d24.rst b/Documentation/hwmon/tps546d24.rst
new file mode 100644
index 000000000..97adb8a30
--- /dev/null
+++ b/Documentation/hwmon/tps546d24.rst
@@ -0,0 +1,35 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver tps546d24
+=======================
+
+Supported chips:
+
+ * TI TPS546D24
+
+ Prefix: 'tps546d24'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.ti.com/lit/gpn/tps546d24
+
+Author: Duke Du <dukedu83@gmail.com>
+
+
+Description
+-----------
+
+The TPS546D24A is a highly integrated, non-isolated DC/DC converter capable
+of high frequency operation and 40-A current output from a 7-mm x 5-mm
+package.
+
+Two, three, and four TPS546D24A devices can be interconnected
+to provide up to 160 A on a single output. The device has an option to
+overdrive the internal 5-V LDO with an external 5-V supply via the VDD5
+pin to improve efficiency and reduce power dissipation of the converter.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
diff --git a/Documentation/hwmon/twl4030-madc-hwmon.rst b/Documentation/hwmon/twl4030-madc-hwmon.rst
new file mode 100644
index 000000000..22c885383
--- /dev/null
+++ b/Documentation/hwmon/twl4030-madc-hwmon.rst
@@ -0,0 +1,49 @@
+Kernel driver twl4030-madc
+==========================
+
+Supported chips:
+
+ * Texas Instruments TWL4030
+
+ Prefix: 'twl4030-madc'
+
+
+Authors:
+ J Keerthy <j-keerthy@ti.com>
+
+Description
+-----------
+
+The Texas Instruments TWL4030 is a Power Management and Audio Circuit. Among
+other things it contains a 10-bit A/D converter MADC. The converter has 16
+channels which can be used in different modes.
+
+
+See this table for the meaning of the different channels
+
+======= ==========================================================
+Channel Signal
+======= ==========================================================
+0 Battery type(BTYPE)
+1 BCI: Battery temperature (BTEMP)
+2 GP analog input
+3 GP analog input
+4 GP analog input
+5 GP analog input
+6 GP analog input
+7 GP analog input
+8 BCI: VBUS voltage(VBUS)
+9 Backup Battery voltage (VBKP)
+10 BCI: Battery charger current (ICHG)
+11 BCI: Battery charger voltage (VCHG)
+12 BCI: Main battery voltage (VBAT)
+13 Reserved
+14 Reserved
+15 VRUSB Supply/Speaker left/Speaker right polarization level
+======= ==========================================================
+
+
+The Sysfs nodes will represent the voltage in the units of mV,
+the temperature channel shows the converted temperature in
+degree Celsius. The Battery charging current channel represents
+battery charging current in mA.
diff --git a/Documentation/hwmon/ucd9000.rst b/Documentation/hwmon/ucd9000.rst
new file mode 100644
index 000000000..704f0cbd9
--- /dev/null
+++ b/Documentation/hwmon/ucd9000.rst
@@ -0,0 +1,137 @@
+Kernel driver ucd9000
+=====================
+
+Supported chips:
+
+ * TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, and UCD90910
+
+ Prefixes: 'ucd90120', 'ucd90124', 'ucd90160', 'ucd90320', 'ucd9090',
+ 'ucd90910'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ - http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd90160.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd90320.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+From datasheets:
+
+The UCD90120 Power Supply Sequencer and System Health Monitor monitors and
+sequences up to 12 independent voltage rails. The device integrates a 12-bit
+ADC with a 2.5V internal reference for monitoring up to 13 power supply voltage,
+current, or temperature inputs.
+
+The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and
+system-health monitor. The device integrates a 12-bit ADC for monitoring up to
+13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins
+can be used for power supply enables, power-on reset signals, external
+interrupts, cascading, or other system functions. Twelve of these pins offer PWM
+functionality. Using these pins, the UCD90124 offers support for fan control,
+margining, and general-purpose PWM functions.
+
+The UCD90160 is a 16-rail PMBus/I2C addressable power-supply sequencer and
+monitor. The device integrates a 12-bit ADC for monitoring up to 16 power-supply
+voltage inputs. Twenty-six GPIO pins can be used for power supply enables,
+power-on reset signals, external interrupts, cascading, or other system
+functions. Twelve of these pins offer PWM functionality. Using these pins, the
+UCD90160 offers support for margining, and general-purpose PWM functions.
+
+The UCD90320 is a 32-rail PMBus/I2C addressable power-supply sequencer and
+monitor. The 24 integrated ADC channels (AMONx) monitor the power supply
+voltage, current, and temperature. Of the 84 GPIO pins, 8 can be used as
+digital monitors (DMONx), 32 to enable the power supply (ENx), 24 for margining
+(MARx), 16 for logical GPO, and 32 GPIs for cascading, and system function.
+
+The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and
+monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply
+voltage inputs. Twenty-three GPIO pins can be used for power supply enables,
+power-on reset signals, external interrupts, cascading, or other system
+functions. Ten of these pins offer PWM functionality. Using these pins, the
+UCD9090 offers support for margining, and general-purpose PWM functions.
+
+The UCD90910 is a ten-rail I2C / PMBus addressable power-supply sequencer and
+system-health monitor. The device integrates a 12-bit ADC for monitoring up to
+13 power-supply voltage, current, or temperature inputs.
+
+This driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus.rst for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+in[1-12]_label "vout[1-12]".
+in[1-12]_input Measured voltage. From READ_VOUT register.
+in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
+ register.
+in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
+ status.
+in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
+ status.
+
+curr[1-12]_label "iout[1-12]".
+curr[1-12]_input Measured current. From READ_IOUT register.
+curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[1-12]_lcrit Critical minimum output current. From
+ IOUT_UC_FAULT_LIMIT register.
+curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
+ register.
+curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
+curr[1-12]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+
+ For each attribute index, either voltage or current is
+ reported, but not both. If voltage or current is
+ reported depends on the chip configuration.
+
+temp[1-2]_input Measured temperatures. From READ_TEMPERATURE_1 and
+ READ_TEMPERATURE_2 registers.
+temp[1-2]_max Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-2]_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-2]_max_alarm Temperature high alarm.
+temp[1-2]_crit_alarm Temperature critical high alarm.
+
+fan[1-4]_input Fan RPM.
+fan[1-4]_alarm Fan alarm.
+fan[1-4]_fault Fan fault.
+
+ Fan attributes are only available on chips supporting
+ fan control (UCD90124, UCD90910). Attribute files are
+ created only for enabled fans.
+ Note that even though UCD90910 supports up to 10 fans,
+ only up to four fans are currently supported.
+======================= ========================================================
diff --git a/Documentation/hwmon/ucd9200.rst b/Documentation/hwmon/ucd9200.rst
new file mode 100644
index 000000000..4f0e7c3ca
--- /dev/null
+++ b/Documentation/hwmon/ucd9200.rst
@@ -0,0 +1,124 @@
+Kernel driver ucd9200
+=====================
+
+Supported chips:
+
+ * TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+
+ Prefixes: 'ucd9220', 'ucd9222', 'ucd9224', 'ucd9240', 'ucd9244', 'ucd9246',
+ 'ucd9248'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ - http://focus.ti.com/lit/ds/symlink/ucd9220.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd9222.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd9224.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd9240.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd9244.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd9246.pdf
+ - http://focus.ti.com/lit/ds/symlink/ucd9248.pdf
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+[From datasheets] UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and
+UCD9248 are multi-rail, multi-phase synchronous buck digital PWM controllers
+designed for non-isolated DC/DC power applications. The devices integrate
+dedicated circuitry for DC/DC loop management with flash memory and a serial
+interface to support configuration, monitoring and management.
+
+This driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus.rst for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+in1_label "vin".
+in1_input Measured voltage. From READ_VIN register.
+in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register.
+in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register.
+in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register.
+in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT
+ register.
+in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status.
+in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status.
+in1_lcrit_alarm Voltage critical low alarm. From VIN_UV_FAULT status.
+in1_crit_alarm Voltage critical high alarm. From VIN_OV_FAULT status.
+
+in[2-5]_label "vout[1-4]".
+in[2-5]_input Measured voltage. From READ_VOUT register.
+in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
+ register.
+in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
+ status.
+in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
+ status.
+
+curr1_label "iin".
+curr1_input Measured current. From READ_IIN register.
+
+curr[2-5]_label "iout[1-4]".
+curr[2-5]_input Measured current. From READ_IOUT register.
+curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[2-5]_lcrit Critical minimum output current. From
+ IOUT_UC_FAULT_LIMIT register.
+curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
+ register.
+curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
+curr[2-5]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+
+power1_input Measured input power. From READ_PIN register.
+power1_label "pin"
+
+power[2-5]_input Measured output power. From READ_POUT register.
+power[2-5]_label "pout[1-4]"
+
+ The number of output voltage, current, and power
+ attribute sets is determined by the number of enabled
+ rails. See chip datasheets for details.
+
+temp[1-5]_input Measured temperatures. From READ_TEMPERATURE_1 and
+ READ_TEMPERATURE_2 registers.
+ temp1 is the chip internal temperature. temp[2-5] are
+ rail temperatures. temp[2-5] attributes are only
+ created for enabled rails. See chip datasheets for
+ details.
+temp[1-5]_max Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-5]_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-5]_max_alarm Temperature high alarm.
+temp[1-5]_crit_alarm Temperature critical high alarm.
+
+fan1_input Fan RPM. ucd9240 only.
+fan1_alarm Fan alarm. ucd9240 only.
+fan1_fault Fan fault. ucd9240 only.
+======================= ========================================================
diff --git a/Documentation/hwmon/userspace-tools.rst b/Documentation/hwmon/userspace-tools.rst
new file mode 100644
index 000000000..bf3797c8e
--- /dev/null
+++ b/Documentation/hwmon/userspace-tools.rst
@@ -0,0 +1,43 @@
+Userspace tools
+===============
+
+Introduction
+------------
+
+Most mainboards have sensor chips to monitor system health (like temperatures,
+voltages, fans speed). They are often connected through an I2C bus, but some
+are also connected directly through the ISA bus.
+
+The kernel drivers make the data from the sensor chips available in the /sys
+virtual filesystem. Userspace tools are then used to display the measured
+values or configure the chips in a more friendly manner.
+
+Lm-sensors
+----------
+
+Core set of utilities that will allow you to obtain health information,
+setup monitoring limits etc. You can get them on their homepage
+http://www.lm-sensors.org/ or as a package from your Linux distribution.
+
+If from website:
+Get lm-sensors from project web site. Please note, you need only userspace
+part, so compile with "make user" and install with "make user_install".
+
+General hints to get things working:
+
+0) get lm-sensors userspace utils
+1) compile all drivers in I2C and Hardware Monitoring sections as modules
+ in your kernel
+2) run sensors-detect script, it will tell you what modules you need to load.
+3) load them and run "sensors" command, you should see some results.
+4) fix sensors.conf, labels, limits, fan divisors
+5) if any more problems consult FAQ, or documentation
+
+Other utilities
+---------------
+
+If you want some graphical indicators of system health look for applications
+like: gkrellm, ksensors, xsensors, wmtemp, wmsensors, wmgtemp, ksysguardd,
+hardware-monitor
+
+If you are server administrator you can try snmpd or mrtgutils.
diff --git a/Documentation/hwmon/vexpress.rst b/Documentation/hwmon/vexpress.rst
new file mode 100644
index 000000000..8c861c815
--- /dev/null
+++ b/Documentation/hwmon/vexpress.rst
@@ -0,0 +1,41 @@
+Kernel driver vexpress
+======================
+
+Supported systems:
+
+ * ARM Ltd. Versatile Express platform
+
+ Prefix: 'vexpress'
+
+ Datasheets:
+
+ * "Hardware Description" sections of the Technical Reference Manuals
+ for the Versatile Express boards:
+
+ - http://infocenter.arm.com/help/topic/com.arm.doc.subset.boards.express/index.html
+
+ * Section "4.4.14. System Configuration registers" of the V2M-P1 TRM:
+
+ - http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0447-/index.html
+
+Author: Pawel Moll
+
+Description
+-----------
+
+Versatile Express platform (http://www.arm.com/versatileexpress/) is a
+reference & prototyping system for ARM Ltd. processors. It can be set up
+from a wide range of boards, each of them containing (apart of the main
+chip/FPGA) a number of microcontrollers responsible for platform
+configuration and control. Theses microcontrollers can also monitor the
+board and its environment by a number of internal and external sensors,
+providing information about power lines voltages and currents, board
+temperature and power usage. Some of them also calculate consumed energy
+and provide a cumulative use counter.
+
+The configuration devices are _not_ memory mapped and must be accessed
+via a custom interface, abstracted by the "vexpress_config" API.
+
+As these devices are non-discoverable, they must be described in a Device
+Tree passed to the kernel. Details of the DT binding for them can be found
+in Documentation/devicetree/bindings/hwmon/vexpress.txt.
diff --git a/Documentation/hwmon/via686a.rst b/Documentation/hwmon/via686a.rst
new file mode 100644
index 000000000..7ab9ddebc
--- /dev/null
+++ b/Documentation/hwmon/via686a.rst
@@ -0,0 +1,84 @@
+Kernel driver via686a
+=====================
+
+Supported chips:
+
+ * Via VT82C686A, VT82C686B Southbridge Integrated Hardware Monitor
+
+ Prefix: 'via686a'
+
+ Addresses scanned: ISA in PCI-space encoded address
+
+ Datasheet: On request through web form (http://www.via.com.tw/en/resources/download-center/)
+
+Authors:
+ - Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ - Mark D. Studebaker <mdsxyz123@yahoo.com>
+ - Bob Dougherty <bobd@stanford.edu>
+ - (Some conversion-factor data were contributed by
+ - Jonathan Teh Soon Yew <j.teh@iname.com>
+ - and Alex van Kaam <darkside@chello.nl>.)
+
+Module Parameters
+-----------------
+
+======================= =======================================================
+force_addr=0xaddr Set the I/O base address. Useful for boards that
+ don't set the address in the BIOS. Look for a BIOS
+ upgrade before resorting to this. Does not do a
+ PCI force; the via686a must still be present in lspci.
+ Don't use this unless the driver complains that the
+ base address is not set.
+ Example: 'modprobe via686a force_addr=0x6000'
+======================= =======================================================
+
+Description
+-----------
+
+The driver does not distinguish between the chips and reports
+all as a 686A.
+
+The Via 686a southbridge has integrated hardware monitor functionality.
+It also has an I2C bus, but this driver only supports the hardware monitor.
+For the I2C bus driver, see <file:Documentation/i2c/busses/i2c-viapro.rst>
+
+The Via 686a implements three temperature sensors, two fan rotation speed
+sensors, five voltage sensors and alarms.
+
+Temperatures are measured in degrees Celsius. An alarm is triggered once
+when the Overtemperature Shutdown limit is crossed; it is triggered again
+as soon as it drops below the hysteresis value.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Voltages are internally scalled, so each voltage channel
+has a different resolution and range.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.5 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The driver only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
+
+Known Issues
+------------
+
+This driver handles sensors integrated in some VIA south bridges. It is
+possible that a motherboard maker used a VT82C686A/B chip as part of a
+product design but was not interested in its hardware monitoring features,
+in which case the sensor inputs will not be wired. This is the case of
+the Asus K7V, A7V and A7V133 motherboards, to name only a few of them.
+So, if you need the force_addr parameter, and end up with values which
+don't seem to make any sense, don't look any further: your chip is simply
+not wired for hardware monitoring.
diff --git a/Documentation/hwmon/vt1211.rst b/Documentation/hwmon/vt1211.rst
new file mode 100644
index 000000000..ddbcde7dd
--- /dev/null
+++ b/Documentation/hwmon/vt1211.rst
@@ -0,0 +1,226 @@
+Kernel driver vt1211
+====================
+
+Supported chips:
+
+ * VIA VT1211
+
+ Prefix: 'vt1211'
+
+ Addresses scanned: none, address read from Super-I/O config space
+
+ Datasheet: Provided by VIA upon request and under NDA
+
+Authors: Juerg Haefliger <juergh@gmail.com>
+
+This driver is based on the driver for kernel 2.4 by Mark D. Studebaker and
+its port to kernel 2.6 by Lars Ekman.
+
+Thanks to Joseph Chan and Fiona Gatt from VIA for providing documentation and
+technical support.
+
+
+Module Parameters
+-----------------
+
+
+* uch_config: int
+ Override the BIOS default universal channel (UCH)
+ configuration for channels 1-5.
+ Legal values are in the range of 0-31. Bit 0 maps to
+ UCH1, bit 1 maps to UCH2 and so on. Setting a bit to 1
+ enables the thermal input of that particular UCH and
+ setting a bit to 0 enables the voltage input.
+
+* int_mode: int
+ Override the BIOS default temperature interrupt mode.
+ The only possible value is 0 which forces interrupt
+ mode 0. In this mode, any pending interrupt is cleared
+ when the status register is read but is regenerated as
+ long as the temperature stays above the hysteresis
+ limit.
+
+Be aware that overriding BIOS defaults might cause some unwanted side effects!
+
+
+Description
+-----------
+
+The VIA VT1211 Super-I/O chip includes complete hardware monitoring
+capabilities. It monitors 2 dedicated temperature sensor inputs (temp1 and
+temp2), 1 dedicated voltage (in5) and 2 fans. Additionally, the chip
+implements 5 universal input channels (UCH1-5) that can be individually
+programmed to either monitor a voltage or a temperature.
+
+This chip also provides manual and automatic control of fan speeds (according
+to the datasheet). The driver only supports automatic control since the manual
+mode doesn't seem to work as advertised in the datasheet. In fact I couldn't
+get manual mode to work at all! Be aware that automatic mode hasn't been
+tested very well (due to the fact that my EPIA M10000 doesn't have the fans
+connected to the PWM outputs of the VT1211 :-().
+
+The following table shows the relationship between the vt1211 inputs and the
+sysfs nodes.
+
+=============== ============== =========== ================================
+Sensor Voltage Mode Temp Mode Default Use (from the datasheet)
+=============== ============== =========== ================================
+Reading 1 temp1 Intel thermal diode
+Reading 3 temp2 Internal thermal diode
+UCH1/Reading2 in0 temp3 NTC type thermistor
+UCH2 in1 temp4 +2.5V
+UCH3 in2 temp5 VccP (processor core)
+UCH4 in3 temp6 +5V
+UCH5 in4 temp7 +12V
++3.3V in5 Internal VCC (+3.3V)
+=============== ============== =========== ================================
+
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by an 8-bit ADC with a LSB of ~10mV. The supported input
+range is thus from 0 to 2.60V. Voltage values outside of this range need
+external scaling resistors. This external scaling needs to be compensated for
+via compute lines in sensors.conf, like:
+
+compute inx @*(1+R1/R2), @/(1+R1/R2)
+
+The board level scaling resistors according to VIA's recommendation are as
+follows. And this is of course totally dependent on the actual board
+implementation :-) You will have to find documentation for your own
+motherboard and edit sensors.conf accordingly.
+
+============= ====== ====== ========= ============
+ Expected
+Voltage R1 R2 Divider Raw Value
+============= ====== ====== ========= ============
++2.5V 2K 10K 1.2 2083 mV
+VccP --- --- 1.0 1400 mV [1]_
++5V 14K 10K 2.4 2083 mV
++12V 47K 10K 5.7 2105 mV
++3.3V (int) 2K 3.4K 1.588 3300 mV [2]_
++3.3V (ext) 6.8K 10K 1.68 1964 mV
+============= ====== ====== ========= ============
+
+.. [1] Depending on the CPU (1.4V is for a VIA C3 Nehemiah).
+
+.. [2] R1 and R2 for 3.3V (int) are internal to the VT1211 chip and the driver
+ performs the scaling and returns the properly scaled voltage value.
+
+Each measured voltage has an associated low and high limit which triggers an
+alarm when crossed.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are reported in millidegree Celsius. Each measured temperature
+has a high limit which triggers an alarm if crossed. There is an associated
+hysteresis value with each temperature below which the temperature has to drop
+before the alarm is cleared (this is only true for interrupt mode 0). The
+interrupt mode can be forced to 0 in case the BIOS doesn't do it
+automatically. See the 'Module Parameters' section for details.
+
+All temperature channels except temp2 are external. Temp2 is the VT1211
+internal thermal diode and the driver does all the scaling for temp2 and
+returns the temperature in millidegree Celsius. For the external channels
+temp1 and temp3-temp7, scaling depends on the board implementation and needs
+to be performed in userspace via sensors.conf.
+
+Temp1 is an Intel-type thermal diode which requires the following formula to
+convert between sysfs readings and real temperatures:
+
+compute temp1 (@-Offset)/Gain, (@*Gain)+Offset
+
+According to the VIA VT1211 BIOS porting guide, the following gain and offset
+values should be used:
+
+=============== ======== ===========
+Diode Type Offset Gain
+=============== ======== ===========
+Intel CPU 88.638 0.9528
+ 65.000 0.9686 [3]_
+VIA C3 Ezra 83.869 0.9528
+VIA C3 Ezra-T 73.869 0.9528
+=============== ======== ===========
+
+.. [3] This is the formula from the lm_sensors 2.10.0 sensors.conf file. I don't
+ know where it comes from or how it was derived, it's just listed here for
+ completeness.
+
+Temp3-temp7 support NTC thermistors. For these channels, the driver returns
+the voltages as seen at the individual pins of UCH1-UCH5. The voltage at the
+pin (Vpin) is formed by a voltage divider made of the thermistor (Rth) and a
+scaling resistor (Rs)::
+
+ Vpin = 2200 * Rth / (Rs + Rth) (2200 is the ADC max limit of 2200 mV)
+
+The equation for the thermistor is as follows (google it if you want to know
+more about it)::
+
+ Rth = Ro * exp(B * (1 / T - 1 / To)) (To is 298.15K (25C) and Ro is the
+ nominal resistance at 25C)
+
+Mingling the above two equations and assuming Rs = Ro and B = 3435 yields the
+following formula for sensors.conf::
+
+ compute tempx 1 / (1 / 298.15 - (` (2200 / @ - 1)) / 3435) - 273.15,
+ 2200 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @))))
+
+
+Fan Speed Control
+-----------------
+
+The VT1211 provides 2 programmable PWM outputs to control the speeds of 2
+fans. Writing a 2 to any of the two pwm[1-2]_enable sysfs nodes will put the
+PWM controller in automatic mode. There is only a single controller that
+controls both PWM outputs but each PWM output can be individually enabled and
+disabled.
+
+Each PWM has 4 associated distinct output duty-cycles: full, high, low and
+off. Full and off are internally hard-wired to 255 (100%) and 0 (0%),
+respectively. High and low can be programmed via
+pwm[1-2]_auto_point[2-3]_pwm. Each PWM output can be associated with a
+different thermal input but - and here's the weird part - only one set of
+thermal thresholds exist that controls both PWMs output duty-cycles. The
+thermal thresholds are accessible via pwm[1-2]_auto_point[1-4]_temp. Note
+that even though there are 2 sets of 4 auto points each, they map to the same
+registers in the VT1211 and programming one set is sufficient (actually only
+the first set pwm1_auto_point[1-4]_temp is writable, the second set is
+read-only).
+
+========================== =========================================
+PWM Auto Point PWM Output Duty-Cycle
+========================== =========================================
+pwm[1-2]_auto_point4_pwm full speed duty-cycle (hard-wired to 255)
+pwm[1-2]_auto_point3_pwm high speed duty-cycle
+pwm[1-2]_auto_point2_pwm low speed duty-cycle
+pwm[1-2]_auto_point1_pwm off duty-cycle (hard-wired to 0)
+========================== =========================================
+
+========================== =================
+Temp Auto Point Thermal Threshold
+========================== =================
+pwm[1-2]_auto_point4_temp full speed temp
+pwm[1-2]_auto_point3_temp high speed temp
+pwm[1-2]_auto_point2_temp low speed temp
+pwm[1-2]_auto_point1_temp off temp
+========================== =================
+
+Long story short, the controller implements the following algorithm to set the
+PWM output duty-cycle based on the input temperature:
+
+=================== ======================= ========================
+Thermal Threshold Output Duty-Cycle Output Duty-Cycle
+ (Rising Temp) (Falling Temp)
+=================== ======================= ========================
+- full speed duty-cycle full speed duty-cycle
+full speed temp
+- high speed duty-cycle full speed duty-cycle
+high speed temp
+- low speed duty-cycle high speed duty-cycle
+low speed temp
+- off duty-cycle low speed duty-cycle
+off temp
+=================== ======================= ========================
diff --git a/Documentation/hwmon/w83627ehf.rst b/Documentation/hwmon/w83627ehf.rst
new file mode 100644
index 000000000..7bb557c94
--- /dev/null
+++ b/Documentation/hwmon/w83627ehf.rst
@@ -0,0 +1,248 @@
+Kernel driver w83627ehf
+=======================
+
+Supported chips:
+
+ * Winbond W83627EHF/EHG (ISA access ONLY)
+
+ Prefix: 'w83627ehf'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: not available
+
+ * Winbond W83627DHG
+
+ Prefix: 'w83627dhg'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: not available
+
+ * Winbond W83627DHG-P
+
+ Prefix: 'w83627dhg'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: not available
+
+ * Winbond W83627UHG
+
+ Prefix: 'w83627uhg'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: available from www.nuvoton.com
+
+ * Winbond W83667HG
+
+ Prefix: 'w83667hg'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: not available
+
+ * Winbond W83667HG-B
+
+ Prefix: 'w83667hg'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+ * Nuvoton NCT6775F/W83667HG-I
+
+ Prefix: 'nct6775'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+ * Nuvoton NCT6776F
+
+ Prefix: 'nct6776'
+
+ Addresses scanned: ISA address retrieved from Super I/O registers
+
+ Datasheet: Available from Nuvoton upon request
+
+
+Authors:
+
+ - Jean Delvare <jdelvare@suse.de>
+ - Yuan Mu (Winbond)
+ - Rudolf Marek <r.marek@assembler.cz>
+ - David Hubbard <david.c.hubbard@gmail.com>
+ - Gong Jun <JGong@nuvoton.com>
+
+Description
+-----------
+
+This driver implements support for the Winbond W83627EHF, W83627EHG,
+W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
+(NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
+as Winbond chips.
+
+The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
+(except for 627UHG), alarms with beep warnings (control unimplemented),
+and some automatic fan regulation strategies (plus manual fan control mode).
+
+The temperature sensor sources on W82677HG-B, NCT6775F, and NCT6776F are
+configurable. temp4 and higher attributes are only reported if its temperature
+source differs from the temperature sources of the already reported temperature
+sensors. The configured source for each of the temperature sensors is provided
+in tempX_label.
+
+Temperatures are measured in degrees Celsius and measurement resolution is 1
+degC for temp1 and 0.5 degC for temp2 and temp3. For temp4 and higher,
+resolution is 1 degC for W83667HG-B and 0.0 degC for NCT6775F and NCT6776F.
+An alarm is triggered when the temperature gets higher than high limit;
+it stays on until the temperature falls below the hysteresis value.
+Alarms are only supported for temp1, temp2, and temp3.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64 or
+128) to give the readings more range or accuracy. The driver sets the most
+suitable fan divisor itself. Some fans might not be present because they
+share pins with other functions.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+The driver supports automatic fan control mode known as Thermal Cruise.
+In this mode, the chip attempts to keep the measured temperature in a
+predefined temperature range. If the temperature goes out of range, fan
+is driven slower/faster to reach the predefined range again.
+
+The mode works for fan1-fan4. Mapping of temperatures to pwm outputs is as
+follows::
+
+ temp1 -> pwm1
+ temp2 -> pwm2
+ temp3 -> pwm3 (not on 627UHG)
+ prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
+ supported by the driver)
+
+/sys files
+----------
+
+name
+ this is a standard hwmon device entry, it contains the name of
+ the device (see the prefix in the list of supported devices at
+ the top of this file)
+
+pwm[1-4]
+ this file stores PWM duty cycle or DC value (fan speed) in range:
+
+ 0 (stop) to 255 (full)
+
+pwm[1-4]_enable
+ this file controls mode of fan/temperature control:
+
+ * 1 Manual mode, write to pwm file any value 0-255 (full speed)
+ * 2 "Thermal Cruise" mode
+ * 3 "Fan Speed Cruise" mode
+ * 4 "Smart Fan III" mode
+ * 5 "Smart Fan IV" mode
+
+ SmartFan III mode is not supported on NCT6776F.
+
+ SmartFan IV mode is configurable only if it was configured at system
+ startup, and is only supported for W83677HG-B, NCT6775F, and NCT6776F.
+ SmartFan IV operational parameters can not be configured at this time,
+ and the various pwm attributes are not used in SmartFan IV mode.
+ The attributes can be written to, which is useful if you plan to
+ configure the system for a different pwm mode. However, the information
+ returned when reading pwm attributes is unrelated to SmartFan IV
+ operation.
+
+pwm[1-4]_mode
+ controls if output is PWM or DC level
+
+ * 0 DC output (0 - 12v)
+ * 1 PWM output
+
+Thermal Cruise mode
+-------------------
+
+If the temperature is in the range defined by:
+
+pwm[1-4]_target
+ set target temperature, unit millidegree Celsius
+ (range 0 - 127000)
+pwm[1-4]_tolerance
+ tolerance, unit millidegree Celsius (range 0 - 15000)
+
+there are no changes to fan speed. Once the temperature leaves the interval,
+fan speed increases (temp is higher) or decreases if lower than desired.
+There are defined steps and times, but not exported by the driver yet.
+
+pwm[1-4]_min_output
+ minimum fan speed (range 1 - 255), when the temperature
+ is below defined range.
+pwm[1-4]_stop_time
+ how many milliseconds [ms] must elapse to switch
+ corresponding fan off. (when the temperature was below
+ defined range).
+pwm[1-4]_start_output
+ minimum fan speed (range 1 - 255) when spinning up
+pwm[1-4]_step_output
+ rate of fan speed change (1 - 255)
+pwm[1-4]_stop_output
+ minimum fan speed (range 1 - 255) when spinning down
+pwm[1-4]_max_output
+ maximum fan speed (range 1 - 255), when the temperature
+ is above defined range.
+
+Note: last six functions are influenced by other control bits, not yet exported
+ by the driver, so a change might not have any effect.
+
+Implementation Details
+----------------------
+
+Future driver development should bear in mind that the following registers have
+different functions on the 627EHF and the 627DHG. Some registers also have
+different power-on default values, but BIOS should already be loading
+appropriate defaults. Note that bank selection must be performed as is currently
+done in the driver for all register addresses.
+
+========================= =====================================================
+Register(s) Meaning
+========================= =====================================================
+0x49 only on DHG, selects temperature source for AUX fan,
+ CPU fan0
+0x4a not completely documented for the EHF and the DHG
+ documentation assigns different behavior to bits 7
+ and 6, including extending the temperature input
+ selection to SmartFan I, not just SmartFan III.
+ Testing on the EHF will reveal whether they are
+ compatible or not.
+0x58 Chip ID: 0xa1=EHF 0xc1=DHG
+0x5e only on DHG, has bits to enable "current mode"
+ temperature detection and critical temperature
+ protection
+0x45b only on EHF, bit 3, vin4 alarm (EHF supports 10
+ inputs, only 9 on DHG)
+0x552 only on EHF, vin4
+0x558 only on EHF, vin4 high limit
+0x559 only on EHF, vin4 low limit
+0x6b only on DHG, SYS fan critical temperature
+0x6c only on DHG, CPU fan0 critical temperature
+0x6d only on DHG, AUX fan critical temperature
+0x6e only on DHG, CPU fan1 critical temperature
+0x50-0x55 and 0x650-0x657 marked as:
+
+ - "Test Register" for the EHF
+ - "Reserved Register" for the DHG
+========================= =====================================================
+
+The DHG also supports PECI, where the DHG queries Intel CPU temperatures, and
+the ICH8 southbridge gets that data via PECI from the DHG, so that the
+southbridge drives the fans. And the DHG supports SST, a one-wire serial bus.
+
+The DHG-P has an additional automatic fan speed control mode named Smart Fan
+(TM) III+. This mode is not yet supported by the driver.
diff --git a/Documentation/hwmon/w83627hf.rst b/Documentation/hwmon/w83627hf.rst
new file mode 100644
index 000000000..d1406c28d
--- /dev/null
+++ b/Documentation/hwmon/w83627hf.rst
@@ -0,0 +1,124 @@
+Kernel driver w83627hf
+======================
+
+Supported chips:
+ * Winbond W83627HF (ISA accesses ONLY)
+ Prefix: 'w83627hf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ * Winbond W83627THF
+ Prefix: 'w83627thf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ * Winbond W83697HF
+ Prefix: 'w83697hf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ * Winbond W83637HF
+ Prefix: 'w83637hf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ * Winbond W83687THF
+ Prefix: 'w83687thf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Provided by Winbond on request(http://www.winbond.com/hq/enu)
+
+Authors:
+ Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
+ Mark Studebaker <mdsxyz123@yahoo.com>,
+ Bernhard C. Schrenk <clemy@clemy.org>
+
+Module Parameters
+-----------------
+
+* force_i2c: int
+ Initialize the I2C address of the sensors
+* init: int
+ (default is 1)
+ Use 'init=0' to bypass initializing the chip.
+ Try this if your computer crashes when you load the module.
+
+Description
+-----------
+
+This driver implements support for ISA accesses *only* for
+the Winbond W83627HF, W83627THF, W83697HF and W83637HF Super I/O chips.
+We will refer to them collectively as Winbond chips.
+
+This driver supports ISA accesses, which should be more reliable
+than i2c accesses. Also, for Tyan boards which contain both a
+Super I/O chip and a second i2c-only Winbond chip (often a W83782D),
+using this driver will avoid i2c address conflicts and complex
+initialization that were required in the w83781d driver.
+
+If you really want i2c accesses for these Super I/O chips,
+use the w83781d driver. However this is not the preferred method
+now that this ISA driver has been developed.
+
+The `w83627_HF_` uses pins 110-106 as VID0-VID4. The `w83627_THF_` uses the
+same pins as GPIO[0:4]. Technically, the `w83627_THF_` does not support a
+VID reading. However the two chips have the identical 128 pin package. So,
+it is possible or even likely for a w83627thf to have the VID signals routed
+to these pins despite their not being labeled for that purpose. Therefore,
+the w83627thf driver interprets these as VID. If the VID on your board
+doesn't work, first see doc/vid in the lm_sensors package[1]. If that still
+doesn't help, you may just ignore the bogus VID reading with no harm done.
+
+For further information on this driver see the w83781d driver documentation.
+
+[1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid
+
+Forcing the address
+-------------------
+
+The driver used to have a module parameter named force_addr, which could
+be used to force the base I/O address of the hardware monitoring block.
+This was meant as a workaround for mainboards with a broken BIOS. This
+module parameter is gone for technical reasons. If you need this feature,
+you can obtain the same result by using the isaset tool (part of
+lm-sensors) before loading the driver:
+
+# Enter the Super I/O config space::
+
+ isaset -y -f 0x2e 0x87
+ isaset -y -f 0x2e 0x87
+
+# Select the hwmon logical device::
+
+ isaset -y 0x2e 0x2f 0x07 0x0b
+
+# Set the base I/O address (to 0x290 in this example)::
+
+ isaset -y 0x2e 0x2f 0x60 0x02
+ isaset -y 0x2e 0x2f 0x61 0x90
+
+# Exit the Super-I/O config space::
+
+ isaset -y -f 0x2e 0xaa
+
+The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but
+0x4e/0x4f is also possible.
+
+Voltage pin mapping
+-------------------
+
+Here is a summary of the voltage pin mapping for the W83627THF. This
+can be useful to convert data provided by board manufacturers into
+working libsensors configuration statements:
+
+
+- W83627THF
+
+
+ ======== =============== =============== ===============
+ Pin Name Register Sysfs attribute
+ ======== =============== =============== ===============
+ 100 CPUVCORE 20h in0
+ 99 VIN0 21h in1
+ 98 VIN1 22h in2
+ 97 VIN2 24h in4
+ 114 AVCC 23h in3
+ 61 5VSB 50h (bank 5) in7
+ 74 VBAT 51h (bank 5) in8
+ ======== =============== =============== ===============
+
+For other supported devices, you'll have to take the hard path and
+look up the information in the datasheet yourself (and then add it
+to this document please.)
diff --git a/Documentation/hwmon/w83773g.rst b/Documentation/hwmon/w83773g.rst
new file mode 100644
index 000000000..cabaed391
--- /dev/null
+++ b/Documentation/hwmon/w83773g.rst
@@ -0,0 +1,35 @@
+Kernel driver w83773g
+=====================
+
+Supported chips:
+
+ * Nuvoton W83773G
+
+ Prefix: 'w83773g'
+
+ Addresses scanned: I2C 0x4c and 0x4d
+
+ Datasheet: https://www.nuvoton.com/resource-files/W83773G_SG_DatasheetV1_2.pdf
+
+Authors:
+
+ Lei YU <mine260309@gmail.com>
+
+Description
+-----------
+
+This driver implements support for Nuvoton W83773G temperature sensor
+chip. This chip implements one local and two remote sensors.
+The chip also features offsets for the two remote sensors which get added to
+the input readings. The chip does all the scaling by itself and the driver
+therefore reports true temperatures that don't need any user-space adjustments.
+Temperature is measured in degrees Celsius.
+The chip is wired over I2C/SMBus and specified over a temperature
+range of -40 to +125 degrees Celsius (for local sensor) and -40 to +127
+degrees Celsius (for remote sensors).
+Resolution for both the local and remote channels is 0.125 degree C.
+
+The chip supports only temperature measurement. The driver exports
+the temperature values via the following sysfs files:
+
+**temp[1-3]_input, temp[2-3]_fault, temp[2-3]_offset, update_interval**
diff --git a/Documentation/hwmon/w83781d.rst b/Documentation/hwmon/w83781d.rst
new file mode 100644
index 000000000..c2dcb6856
--- /dev/null
+++ b/Documentation/hwmon/w83781d.rst
@@ -0,0 +1,513 @@
+Kernel driver w83781d
+=====================
+
+Supported chips:
+
+ * Winbond W83781D
+
+ Prefix: 'w83781d'
+
+ Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
+
+ Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
+
+ * Winbond W83782D
+
+ Prefix: 'w83782d'
+
+ Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
+
+ Datasheet: https://www.winbond.com
+
+ * Winbond W83783S
+
+ Prefix: 'w83783s'
+
+ Addresses scanned: I2C 0x2d
+
+ Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
+
+ * Asus AS99127F
+
+ Prefix: 'as99127f'
+
+ Addresses scanned: I2C 0x28 - 0x2f
+
+ Datasheet: Unavailable from Asus
+
+
+
+Authors:
+
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Philip Edelbrock <phil@netroedge.com>,
+ - Mark Studebaker <mdsxyz123@yahoo.com>
+
+Module parameters
+-----------------
+
+* init int
+ (default 1)
+
+ Use 'init=0' to bypass initializing the chip.
+ Try this if your computer crashes when you load the module.
+
+* reset int
+ (default 0)
+ The driver used to reset the chip on load, but does no more. Use
+ 'reset=1' to restore the old behavior. Report if you need to do this.
+
+force_subclients=bus,caddr,saddr,saddr
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Typical usage is `force_subclients=0,0x2d,0x4a,0x4b`
+ to force the subclients of chip 0x2d on bus 0 to i2c addresses
+ 0x4a and 0x4b. This parameter is useful for certain Tyan boards.
+
+Description
+-----------
+
+This driver implements support for the Winbond W83781D, W83782D, W83783S
+chips, and the Asus AS99127F chips. We will refer to them collectively as
+W8378* chips.
+
+There is quite some difference between these chips, but they are similar
+enough that it was sensible to put them together in one driver.
+The Asus chips are similar to an I2C-only W83782D.
+
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| Chip | #vin | #fanin | #pwm | #temp | wchipid | vendid | i2c | ISA |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| as99127f | 7 | 3 | 0 | 3 | 0x31 | 0x12c3 | yes | no |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| as99127f rev.2 (type_name = as99127f) | 0x31 | 0x5ca3 | yes | no |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| w83781d | 7 | 3 | 0 | 3 | 0x10-1 | 0x5ca3 | yes | yes |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| w83782d | 9 | 3 | 2-4 | 3 | 0x30 | 0x5ca3 | yes | yes |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| w83783s | 5-6 | 3 | 2 | 1-2 | 0x40 | 0x5ca3 | yes | no |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+
+Detection of these chips can sometimes be foiled because they can be in
+an internal state that allows no clean access. If you know the address
+of the chip, use a 'force' parameter; this will put them into a more
+well-behaved state first.
+
+The W8378* implements temperature sensors (three on the W83781D and W83782D,
+two on the W83783S), three fan rotation speed sensors, voltage sensors
+(seven on the W83781D, nine on the W83782D and six on the W83783S), VID
+lines, alarms with beep warnings, and some miscellaneous stuff.
+
+Temperatures are measured in degrees Celsius. There is always one main
+temperature sensor, and one (W83783S) or two (W83781D and W83782D) other
+sensors. An alarm is triggered for the main sensor once when the
+Overtemperature Shutdown limit is crossed; it is triggered again as soon as
+it drops below the Hysteresis value. A more useful behavior
+can be found by setting the Hysteresis value to +127 degrees Celsius; in
+this case, alarms are issued during all the time when the actual temperature
+is above the Overtemperature Shutdown value. The driver sets the
+hysteresis value for temp1 to 127 at initialization.
+
+For the other temperature sensor(s), an alarm is triggered when the
+temperature gets higher then the Overtemperature Shutdown value; it stays
+on until the temperature falls below the Hysteresis value. But on the
+W83781D, there is only one alarm that functions for both other sensors!
+Temperatures are guaranteed within a range of -55 to +125 degrees. The
+main temperature sensors has a resolution of 1 degree; the other sensor(s)
+of 0.5 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8 for the
+W83781D; 1, 2, 4, 8, 16, 32, 64 or 128 for the others) to give
+the readings more range or accuracy. Not all RPM values can accurately
+be represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 4.08 volts, with a resolution
+of 0.016 volt.
+
+The VID lines encode the core voltage value: the voltage level your processor
+should work with. This is hardcoded by the mainboard and/or processor itself.
+It is a value in volts. When it is unconnected, you will often find the
+value 3.50 V here.
+
+The W83782D and W83783S temperature conversion machine understands about
+several kinds of temperature probes. You can program the so-called
+beta value in the sensor files. '1' is the PII/Celeron diode, '2' is the
+TN3904 transistor, and 3435 the default thermistor value. Other values
+are (not yet) supported.
+
+In addition to the alarms described above, there is a CHAS alarm on the
+chips which triggers if your computer case is open.
+
+When an alarm goes off, you can be warned by a beeping signal through
+your computer speaker. It is possible to enable all beeping globally,
+or only the beeping for some alarms.
+
+Individual alarm and beep bits:
+
+======== ==========================
+0x000001 in0
+0x000002 in1
+0x000004 in2
+0x000008 in3
+0x000010 temp1
+0x000020 temp2 (+temp3 on W83781D)
+0x000040 fan1
+0x000080 fan2
+0x000100 in4
+0x000200 in5
+0x000400 in6
+0x000800 fan3
+0x001000 chassis
+0x002000 temp3 (W83782D only)
+0x010000 in7 (W83782D only)
+0x020000 in8 (W83782D only)
+======== ==========================
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.5 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The chips only update values each 1.5 seconds; reading them more often
+will do no harm, but will return 'old' values.
+
+AS99127F PROBLEMS
+-----------------
+The as99127f support was developed without the benefit of a datasheet.
+In most cases it is treated as a w83781d (although revision 2 of the
+AS99127F looks more like a w83782d).
+This support will be BETA until a datasheet is released.
+One user has reported problems with fans stopping
+occasionally.
+
+Note that the individual beep bits are inverted from the other chips.
+The driver now takes care of this so that user-space applications
+don't have to know about it.
+
+Known problems:
+ - Problems with diode/thermistor settings (supported?)
+ - One user reports fans stopping under high server load.
+ - Revision 2 seems to have 2 PWM registers but we don't know
+ how to handle them. More details below.
+
+These will not be fixed unless we get a datasheet.
+If you have problems, please lobby Asus to release a datasheet.
+Unfortunately several others have without success.
+Please do not send mail to us asking for better as99127f support.
+We have done the best we can without a datasheet.
+Please do not send mail to the author or the sensors group asking for
+a datasheet or ideas on how to convince Asus. We can't help.
+
+
+NOTES
+-----
+ 783s has no in1 so that in[2-6] are compatible with the 781d/782d.
+
+ 783s pin is programmable for -5V or temp1; defaults to -5V,
+ no control in driver so temp1 doesn't work.
+
+ 782d and 783s datasheets differ on which is pwm1 and which is pwm2.
+ We chose to follow 782d.
+
+ 782d and 783s pin is programmable for fan3 input or pwm2 output;
+ defaults to fan3 input.
+ If pwm2 is enabled (with echo 255 1 > pwm2), then
+ fan3 will report 0.
+
+ 782d has pwm1-2 for ISA, pwm1-4 for i2c. (pwm3-4 share pins with
+ the ISA pins)
+
+Data sheet updates
+------------------
+ - PWM clock registers:
+ * 000: master / 512
+ * 001: master / 1024
+ * 010: master / 2048
+ * 011: master / 4096
+ * 100: master / 8192
+
+
+Answers from Winbond tech support
+---------------------------------
+
+::
+
+ >
+ > 1) In the W83781D data sheet section 7.2 last paragraph, it talks about
+ > reprogramming the R-T table if the Beta of the thermistor is not
+ > 3435K. The R-T table is described briefly in section 8.20.
+ > What formulas do I use to program a new R-T table for a given Beta?
+ >
+
+ We are sorry that the calculation for R-T table value is
+ confidential. If you have another Beta value of thermistor, we can help
+ to calculate the R-T table for you. But you should give us real R-T
+ Table which can be gotten by thermistor vendor. Therefore we will calculate
+ them and obtain 32-byte data, and you can fill the 32-byte data to the
+ register in Bank0.CR51 of W83781D.
+
+
+ > 2) In the W83782D data sheet, it mentions that pins 38, 39, and 40 are
+ > programmable to be either thermistor or Pentium II diode inputs.
+ > How do I program them for diode inputs? I can't find any register
+ > to program these to be diode inputs.
+
+ You may program Bank0 CR[5Dh] and CR[59h] registers.
+
+ =============================== =============== ============== ============
+ CR[5Dh] bit 1(VTIN1) bit 2(VTIN2) bit 3(VTIN3)
+
+ thermistor 0 0 0
+ diode 1 1 1
+
+
+ (error) CR[59h] bit 4(VTIN1) bit 2(VTIN2) bit 3(VTIN3)
+ (right) CR[59h] bit 4(VTIN1) bit 5(VTIN2) bit 6(VTIN3)
+
+ PII thermal diode 1 1 1
+ 2N3904 diode 0 0 0
+ =============================== =============== ============== ============
+
+
+Asus Clones
+-----------
+
+We have no datasheets for the Asus clones (AS99127F and ASB100 Bach).
+Here are some very useful information that were given to us by Alex Van
+Kaam about how to detect these chips, and how to read their values. He
+also gives advice for another Asus chipset, the Mozart-2 (which we
+don't support yet). Thanks Alex!
+
+I reworded some parts and added personal comments.
+
+Detection
+^^^^^^^^^
+
+AS99127F rev.1, AS99127F rev.2 and ASB100:
+- I2C address range: 0x29 - 0x2F
+- If register 0x58 holds 0x31 then we have an Asus (either ASB100 or AS99127F)
+- Which one depends on register 0x4F (manufacturer ID):
+
+ - 0x06 or 0x94: ASB100
+ - 0x12 or 0xC3: AS99127F rev.1
+ - 0x5C or 0xA3: AS99127F rev.2
+
+ Note that 0x5CA3 is Winbond's ID (WEC), which let us think Asus get their
+ AS99127F rev.2 direct from Winbond. The other codes mean ATT and DVC,
+ respectively. ATT could stand for Asustek something (although it would be
+ very badly chosen IMHO), I don't know what DVC could stand for. Maybe
+ these codes simply aren't meant to be decoded that way.
+
+Mozart-2:
+- I2C address: 0x77
+- If register 0x58 holds 0x56 or 0x10 then we have a Mozart-2
+- Of the Mozart there are 3 types:
+
+ - 0x58=0x56, 0x4E=0x94, 0x4F=0x36: Asus ASM58 Mozart-2
+ - 0x58=0x56, 0x4E=0x94, 0x4F=0x06: Asus AS2K129R Mozart-2
+ - 0x58=0x10, 0x4E=0x5C, 0x4F=0xA3: Asus ??? Mozart-2
+
+ You can handle all 3 the exact same way :)
+
+Temperature sensors
+^^^^^^^^^^^^^^^^^^^
+
+ASB100:
+ - sensor 1: register 0x27
+ - sensor 2 & 3 are the 2 LM75's on the SMBus
+ - sensor 4: register 0x17
+
+Remark:
+
+ I noticed that on Intel boards sensor 2 is used for the CPU
+ and 4 is ignored/stuck, on AMD boards sensor 4 is the CPU and sensor 2 is
+ either ignored or a socket temperature.
+
+AS99127F (rev.1 and 2 alike):
+ - sensor 1: register 0x27
+ - sensor 2 & 3 are the 2 LM75's on the SMBus
+
+Remark:
+
+ Register 0x5b is suspected to be temperature type selector. Bit 1
+ would control temp1, bit 3 temp2 and bit 5 temp3.
+
+Mozart-2:
+ - sensor 1: register 0x27
+ - sensor 2: register 0x13
+
+Fan sensors
+^^^^^^^^^^^
+
+ASB100, AS99127F (rev.1 and 2 alike):
+ - 3 fans, identical to the W83781D
+
+Mozart-2:
+ - 2 fans only, 1350000/RPM/div
+ - fan 1: register 0x28, divisor on register 0xA1 (bits 4-5)
+ - fan 2: register 0x29, divisor on register 0xA1 (bits 6-7)
+
+Voltages
+^^^^^^^^
+
+This is where there is a difference between AS99127F rev.1 and 2.
+
+Remark:
+
+ The difference is similar to the difference between
+ W83781D and W83782D.
+
+ASB100:
+ - in0=r(0x20)*0.016
+ - in1=r(0x21)*0.016
+ - in2=r(0x22)*0.016
+ - in3=r(0x23)*0.016*1.68
+ - in4=r(0x24)*0.016*3.8
+ - in5=r(0x25)*(-0.016)*3.97
+ - in6=r(0x26)*(-0.016)*1.666
+
+AS99127F rev.1:
+ - in0=r(0x20)*0.016
+ - in1=r(0x21)*0.016
+ - in2=r(0x22)*0.016
+ - in3=r(0x23)*0.016*1.68
+ - in4=r(0x24)*0.016*3.8
+ - in5=r(0x25)*(-0.016)*3.97
+ - in6=r(0x26)*(-0.016)*1.503
+
+AS99127F rev.2:
+ - in0=r(0x20)*0.016
+ - in1=r(0x21)*0.016
+ - in2=r(0x22)*0.016
+ - in3=r(0x23)*0.016*1.68
+ - in4=r(0x24)*0.016*3.8
+ - in5=(r(0x25)*0.016-3.6)*5.14+3.6
+ - in6=(r(0x26)*0.016-3.6)*3.14+3.6
+
+Mozart-2:
+ - in0=r(0x20)*0.016
+ - in1=255
+ - in2=r(0x22)*0.016
+ - in3=r(0x23)*0.016*1.68
+ - in4=r(0x24)*0.016*4
+ - in5=255
+ - in6=255
+
+
+PWM
+^^^
+
+* Additional info about PWM on the AS99127F (may apply to other Asus
+ chips as well) by Jean Delvare as of 2004-04-09:
+
+AS99127F revision 2 seems to have two PWM registers at 0x59 and 0x5A,
+and a temperature sensor type selector at 0x5B (which basically means
+that they swapped registers 0x59 and 0x5B when you compare with Winbond
+chips).
+Revision 1 of the chip also has the temperature sensor type selector at
+0x5B, but PWM registers have no effect.
+
+We don't know exactly how the temperature sensor type selection works.
+Looks like bits 1-0 are for temp1, bits 3-2 for temp2 and bits 5-4 for
+temp3, although it is possible that only the most significant bit matters
+each time. So far, values other than 0 always broke the readings.
+
+PWM registers seem to be split in two parts: bit 7 is a mode selector,
+while the other bits seem to define a value or threshold.
+
+When bit 7 is clear, bits 6-0 seem to hold a threshold value. If the value
+is below a given limit, the fan runs at low speed. If the value is above
+the limit, the fan runs at full speed. We have no clue as to what the limit
+represents. Note that there seem to be some inertia in this mode, speed
+changes may need some time to trigger. Also, an hysteresis mechanism is
+suspected since walking through all the values increasingly and then
+decreasingly led to slightly different limits.
+
+When bit 7 is set, bits 3-0 seem to hold a threshold value, while bits 6-4
+would not be significant. If the value is below a given limit, the fan runs
+at full speed, while if it is above the limit it runs at low speed (so this
+is the contrary of the other mode, in a way). Here again, we don't know
+what the limit is supposed to represent.
+
+One remarkable thing is that the fans would only have two or three
+different speeds (transitional states left apart), not a whole range as
+you usually get with PWM.
+
+As a conclusion, you can write 0x00 or 0x8F to the PWM registers to make
+fans run at low speed, and 0x7F or 0x80 to make them run at full speed.
+
+Please contact us if you can figure out how it is supposed to work. As
+long as we don't know more, the w83781d driver doesn't handle PWM on
+AS99127F chips at all.
+
+* Additional info about PWM on the AS99127F rev.1 by Hector Martin:
+
+I've been fiddling around with the (in)famous 0x59 register and
+found out the following values do work as a form of coarse pwm:
+
+0x80
+ - seems to turn fans off after some time(1-2 minutes)... might be
+ some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an
+ old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan
+ that was dropped at the BIOS)
+0x81
+ - off
+0x82
+ - slightly "on-ner" than off, but my fans do not get to move. I can
+ hear the high-pitched PWM sound that motors give off at too-low-pwm.
+0x83
+ - now they do move. Estimate about 70% speed or so.
+0x84-0x8f
+ - full on
+
+Changing the high nibble doesn't seem to do much except the high bit
+(0x80) must be set for PWM to work, else the current pwm doesn't seem to
+change.
+
+My mobo is an ASUS A7V266-E. This behavior is similar to what I got
+with speedfan under Windows, where 0-15% would be off, 15-2x% (can't
+remember the exact value) would be 70% and higher would be full on.
+
+* Additional info about PWM on the AS99127F rev.1 from lm-sensors
+ ticket #2350:
+
+I conducted some experiment on Asus P3B-F motherboard with AS99127F
+(Ver. 1).
+
+I confirm that 0x59 register control the CPU_Fan Header on this
+motherboard, and 0x5a register control PWR_Fan.
+
+In order to reduce the dependency of specific fan, the measurement is
+conducted with a digital scope without fan connected. I found out that
+P3B-F actually output variable DC voltage on fan header center pin,
+looks like PWM is filtered on this motherboard.
+
+Here are some of measurements:
+
+==== =========
+0x80 20 mV
+0x81 20 mV
+0x82 232 mV
+0x83 1.2 V
+0x84 2.31 V
+0x85 3.44 V
+0x86 4.62 V
+0x87 5.81 V
+0x88 7.01 V
+9x89 8.22 V
+0x8a 9.42 V
+0x8b 10.6 V
+0x8c 11.9 V
+0x8d 12.4 V
+0x8e 12.4 V
+0x8f 12.4 V
+==== =========
diff --git a/Documentation/hwmon/w83791d.rst b/Documentation/hwmon/w83791d.rst
new file mode 100644
index 000000000..3adaed39b
--- /dev/null
+++ b/Documentation/hwmon/w83791d.rst
@@ -0,0 +1,180 @@
+Kernel driver w83791d
+=====================
+
+Supported chips:
+
+ * Winbond W83791D
+
+ Prefix: 'w83791d'
+
+ Addresses scanned: I2C 0x2c - 0x2f
+
+ Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791D_W83791Gb.pdf
+
+Author: Charles Spirakis <bezaur@gmail.com>
+
+This driver was derived from the w83781d.c and w83792d.c source files.
+
+Credits:
+
+ w83781d.c:
+
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Philip Edelbrock <phil@netroedge.com>,
+ - Mark Studebaker <mdsxyz123@yahoo.com>
+
+ w83792d.c:
+
+ - Shane Huang (Winbond),
+ - Rudolf Marek <r.marek@assembler.cz>
+
+Additional contributors:
+
+ - Sven Anders <anders@anduras.de>
+ - Marc Hulsman <m.hulsman@tudelft.nl>
+
+Module Parameters
+-----------------
+
+* init boolean
+ (default 0)
+
+ Use 'init=1' to have the driver do extra software initializations.
+ The default behavior is to do the minimum initialization possible
+ and depend on the BIOS to properly setup the chip. If you know you
+ have a w83791d and you're having problems, try init=1 before trying
+ reset=1.
+
+* reset boolean
+ (default 0)
+
+ Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
+ behavior is no chip reset to preserve BIOS settings.
+
+* force_subclients=bus,caddr,saddr,saddr
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b`
+ to force the subclients of chip 0x2f on bus 0 to i2c addresses
+ 0x4a and 0x4b.
+
+
+Description
+-----------
+
+This driver implements support for the Winbond W83791D chip. The W83791G
+chip appears to be the same as the W83791D but is lead free.
+
+Detection of the chip can sometimes be foiled because it can be in an
+internal state that allows no clean access (Bank with ID register is not
+currently selected). If you know the address of the chip, use a 'force'
+parameter; this will put it into a more well-behaved state first.
+
+The driver implements three temperature sensors, ten voltage sensors,
+five fan rotation speed sensors and manual PWM control of each fan.
+
+Temperatures are measured in degrees Celsius and measurement resolution is 1
+degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
+the temperature gets higher than the Overtemperature Shutdown value; it stays
+on until the temperature falls below the Hysteresis value.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4, 8, 16,
+32, 64 or 128 for all fans) to give the readings more range or accuracy.
+
+Each fan controlled is controlled by PWM. The PWM duty cycle can be read and
+set for each fan separately. Valid values range from 0 (stop) to 255 (full).
+PWM 1-3 support Thermal Cruise mode, in which the PWMs are automatically
+regulated to keep respectively temp 1-3 at a certain target temperature.
+See below for the description of the sysfs-interface.
+
+The w83791d has a global bit used to enable beeping from the speaker when an
+alarm is triggered as well as a bitmask to enable or disable the beep for
+specific alarms. You need both the global beep enable bit and the
+corresponding beep bit to be on for a triggered alarm to sound a beep.
+
+The sysfs interface to the global enable is via the sysfs beep_enable file.
+This file is used for both legacy and new code.
+
+The sysfs interface to the beep bitmask has migrated from the original legacy
+method of a single sysfs beep_mask file to a newer method using multiple
+`*_beep` files as described in `Documentation/hwmon/sysfs-interface.rst`.
+
+A similar change has occurred for the bitmap corresponding to the alarms. The
+original legacy method used a single sysfs alarms file containing a bitmap
+of triggered alarms. The newer method uses multiple sysfs `*_alarm` files
+(again following the pattern described in sysfs-interface).
+
+Since both methods read and write the underlying hardware, they can be used
+interchangeably and changes in one will automatically be reflected by
+the other. If you use the legacy bitmask method, your user-space code is
+responsible for handling the fact that the alarms and beep_mask bitmaps
+are not the same (see the table below).
+
+NOTE: All new code should be written to use the newer sysfs-interface
+specification as that avoids bitmap problems and is the preferred interface
+going forward.
+
+The driver reads the hardware chip values at most once every three seconds.
+User mode code requesting values more often will receive cached values.
+
+/sys files
+----------
+The sysfs-interface is documented in the 'sysfs-interface' file. Only
+chip-specific options are documented here.
+
+======================= =======================================================
+pwm[1-3]_enable this file controls mode of fan/temperature control for
+ fan 1-3. Fan/PWM 4-5 only support manual mode.
+
+ * 1 Manual mode
+ * 2 Thermal Cruise mode
+ * 3 Fan Speed Cruise mode (no further support)
+
+temp[1-3]_target defines the target temperature for Thermal Cruise mode.
+ Unit: millidegree Celsius
+ RW
+
+temp[1-3]_tolerance temperature tolerance for Thermal Cruise mode.
+ Specifies an interval around the target temperature
+ in which the fan speed is not changed.
+ Unit: millidegree Celsius
+ RW
+======================= =======================================================
+
+Alarms bitmap vs. beep_mask bitmask
+-----------------------------------
+
+For legacy code using the alarms and beep_mask files:
+
+============= ======== ========= ==========================
+Signal Alarms beep_mask Obs
+============= ======== ========= ==========================
+in0 (VCORE) 0x000001 0x000001
+in1 (VINR0) 0x000002 0x002000 <== mismatch
+in2 (+3.3VIN) 0x000004 0x000004
+in3 (5VDD) 0x000008 0x000008
+in4 (+12VIN) 0x000100 0x000100
+in5 (-12VIN) 0x000200 0x000200
+in6 (-5VIN) 0x000400 0x000400
+in7 (VSB) 0x080000 0x010000 <== mismatch
+in8 (VBAT) 0x100000 0x020000 <== mismatch
+in9 (VINR1) 0x004000 0x004000
+temp1 0x000010 0x000010
+temp2 0x000020 0x000020
+temp3 0x002000 0x000002 <== mismatch
+fan1 0x000040 0x000040
+fan2 0x000080 0x000080
+fan3 0x000800 0x000800
+fan4 0x200000 0x200000
+fan5 0x400000 0x400000
+tart1 0x010000 0x040000 <== mismatch
+tart2 0x020000 0x080000 <== mismatch
+tart3 0x040000 0x100000 <== mismatch
+case_open 0x001000 0x001000
+global_enable - 0x800000 (modified via beep_enable)
+============= ======== ========= ==========================
diff --git a/Documentation/hwmon/w83792d.rst b/Documentation/hwmon/w83792d.rst
new file mode 100644
index 000000000..92c4bfe49
--- /dev/null
+++ b/Documentation/hwmon/w83792d.rst
@@ -0,0 +1,199 @@
+Kernel driver w83792d
+=====================
+
+Supported chips:
+
+ * Winbond W83792D
+
+ Prefix: 'w83792d'
+
+ Addresses scanned: I2C 0x2c - 0x2f
+
+ Datasheet: http://www.winbond.com.tw
+
+Author: Shane Huang (Winbond)
+Updated: Roger Lucas
+
+
+Module Parameters
+-----------------
+
+* init int
+ (default 1)
+
+ Use 'init=0' to bypass initializing the chip.
+ Try this if your computer crashes when you load the module.
+
+* force_subclients=bus,caddr,saddr,saddr
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b`
+ to force the subclients of chip 0x2f on bus 0 to i2c addresses
+ 0x4a and 0x4b.
+
+
+Description
+-----------
+
+This driver implements support for the Winbond W83792AD/D.
+
+Detection of the chip can sometimes be foiled because it can be in an
+internal state that allows no clean access (Bank with ID register is not
+currently selected). If you know the address of the chip, use a 'force'
+parameter; this will put it into a more well-behaved state first.
+
+The driver implements three temperature sensors, seven fan rotation speed
+sensors, nine voltage sensors, and two automatic fan regulation
+strategies called: Smart Fan I (Thermal Cruise mode) and Smart Fan II.
+
+The driver also implements up to seven fan control outputs: pwm1-7. Pwm1-7
+can be configured to PWM output or Analogue DC output via their associated
+pwmX_mode. Outputs pwm4 through pwm7 may or may not be present depending on
+how the W83792AD/D was configured by the BIOS.
+
+Automatic fan control mode is possible only for fan1-fan3.
+
+For all pwmX outputs, a value of 0 means minimum fan speed and a value of
+255 means maximum fan speed.
+
+Temperatures are measured in degrees Celsius and measurement resolution is 1
+degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
+the temperature gets higher than the Overtemperature Shutdown value; it stays
+on until the temperature falls below the Hysteresis value.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64 or
+128) to give the readings more range or accuracy.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+Alarms are provided as output from "realtime status register". Following bits
+are defined:
+
+==== ==========
+bit alarm on
+==== ==========
+0 in0
+1 in1
+2 temp1
+3 temp2
+4 temp3
+5 fan1
+6 fan2
+7 fan3
+8 in2
+9 in3
+10 in4
+11 in5
+12 in6
+13 VID change
+14 chassis
+15 fan7
+16 tart1
+17 tart2
+18 tart3
+19 in7
+20 in8
+21 fan4
+22 fan5
+23 fan6
+==== ==========
+
+Tart will be asserted while target temperature cannot be achieved after 3 minutes
+of full speed rotation of corresponding fan.
+
+In addition to the alarms described above, there is a CHAS alarm on the chips
+which triggers if your computer case is open (This one is latched, contrary
+to realtime alarms).
+
+The chips only update values each 3 seconds; reading them more often will
+do no harm, but will return 'old' values.
+
+
+W83792D PROBLEMS
+----------------
+Known problems:
+ - This driver is only for Winbond W83792D C version device, there
+ are also some motherboards with B version W83792D device. The
+ calculation method to in6-in7(measured value, limits) is a little
+ different between C and B version. C or B version can be identified
+ by CR[0x49h].
+ - The function of vid and vrm has not been finished, because I'm NOT
+ very familiar with them. Adding support is welcome.
+ - The function of chassis open detection needs more tests.
+ - If you have ASUS server board and chip was not found: Then you will
+ need to upgrade to latest (or beta) BIOS. If it does not help please
+ contact us.
+
+Fan control
+-----------
+
+Manual mode
+-----------
+
+Works as expected. You just need to specify desired PWM/DC value (fan speed)
+in appropriate pwm# file.
+
+Thermal cruise
+--------------
+
+In this mode, W83792D provides the Smart Fan system to automatically control
+fan speed to keep the temperatures of CPU and the system within specific
+range. At first a wanted temperature and interval must be set. This is done
+via thermal_cruise# file. The tolerance# file serves to create T +- tolerance
+interval. The fan speed will be lowered as long as the current temperature
+remains below the thermal_cruise# +- tolerance# value. Once the temperature
+exceeds the high limit (T+tolerance), the fan will be turned on with a
+specific speed set by pwm# and automatically controlled its PWM duty cycle
+with the temperature varying. Three conditions may occur:
+
+(1) If the temperature still exceeds the high limit, PWM duty
+cycle will increase slowly.
+
+(2) If the temperature goes below the high limit, but still above the low
+limit (T-tolerance), the fan speed will be fixed at the current speed because
+the temperature is in the target range.
+
+(3) If the temperature goes below the low limit, PWM duty cycle will decrease
+slowly to 0 or a preset stop value until the temperature exceeds the low
+limit. (The preset stop value handling is not yet implemented in driver)
+
+Smart Fan II
+------------
+
+W83792D also provides a special mode for fan. Four temperature points are
+available. When related temperature sensors detects the temperature in preset
+temperature region (sf2_point@_fan# +- tolerance#) it will cause fans to run
+on programmed value from sf2_level@_fan#. You need to set four temperatures
+for each fan.
+
+
+/sys files
+----------
+
+pwm[1-7]
+ - this file stores PWM duty cycle or DC value (fan speed) in range:
+
+ 0 (stop) to 255 (full)
+pwm[1-3]_enable
+ - this file controls mode of fan/temperature control:
+
+ * 0 Disabled
+ * 1 Manual mode
+ * 2 Smart Fan II
+ * 3 Thermal Cruise
+pwm[1-7]_mode
+ - Select PWM or DC mode
+
+ * 0 DC
+ * 1 PWM
+thermal_cruise[1-3]
+ - Selects the desired temperature for cruise (degC)
+tolerance[1-3]
+ - Value in degrees of Celsius (degC) for +- T
+sf2_point[1-4]_fan[1-3]
+ - four temperature points for each fan for Smart Fan II
+sf2_level[1-3]_fan[1-3]
+ - three PWM/DC levels for each fan for Smart Fan II
diff --git a/Documentation/hwmon/w83793.rst b/Documentation/hwmon/w83793.rst
new file mode 100644
index 000000000..83bb40c48
--- /dev/null
+++ b/Documentation/hwmon/w83793.rst
@@ -0,0 +1,113 @@
+Kernel driver w83793
+====================
+
+Supported chips:
+
+ * Winbond W83793G/W83793R
+
+ Prefix: 'w83793'
+
+ Addresses scanned: I2C 0x2c - 0x2f
+
+ Datasheet: Still not published
+
+Authors:
+ - Yuan Mu (Winbond Electronics)
+ - Rudolf Marek <r.marek@assembler.cz>
+
+
+Module parameters
+-----------------
+
+* reset int
+ (default 0)
+
+ This parameter is not recommended, it will lose motherboard specific
+ settings. Use 'reset=1' to reset the chip when loading this module.
+
+* force_subclients=bus,caddr,saddr1,saddr2
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b`
+ to force the subclients of chip 0x2f on bus 0 to i2c addresses
+ 0x4a and 0x4b.
+
+
+Description
+-----------
+
+This driver implements support for Winbond W83793G/W83793R chips.
+
+* Exported features
+ This driver exports 10 voltage sensors, up to 12 fan tachometer inputs,
+ 6 remote temperatures, up to 8 sets of PWM fan controls, SmartFan
+ (automatic fan speed control) on all temperature/PWM combinations, 2
+ sets of 6-pin CPU VID input.
+
+* Sensor resolutions
+ If your motherboard maker used the reference design, the resolution of
+ voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6,
+ 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution,
+ temp5-6 have a 1 degree Celsiis resolution.
+
+* Temperature sensor types
+ Temp1-4 have 2 possible types. It can be read from (and written to)
+ temp[1-4]_type.
+
+ - If the value is 3, it starts monitoring using a remote termal diode
+ (default).
+ - If the value is 6, it starts monitoring using the temperature sensor
+ in Intel CPU and get result by PECI.
+
+ Temp5-6 can be connected to external thermistors (value of
+ temp[5-6]_type is 4).
+
+* Alarm mechanism
+ For voltage sensors, an alarm triggers if the measured value is below
+ the low voltage limit or over the high voltage limit.
+ For temperature sensors, an alarm triggers if the measured value goes
+ above the high temperature limit, and wears off only after the measured
+ value drops below the hysteresis value.
+ For fan sensors, an alarm triggers if the measured value is below the
+ low speed limit.
+
+* SmartFan/PWM control
+ If you want to set a pwm fan to manual mode, you just need to make sure it
+ is not controlled by any temp channel, for example, you want to set fan1
+ to manual mode, you need to check the value of temp[1-6]_fan_map, make
+ sure bit 0 is cleared in the 6 values. And then set the pwm1 value to
+ control the fan.
+
+ Each temperature channel can control all the 8 PWM outputs (by setting the
+ corresponding bit in tempX_fan_map), you can set the temperature channel
+ mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3
+ is the SmartFanII mode. Temperature channels will try to speed up or
+ slow down all controlled fans, this means one fan can receive different
+ PWM value requests from different temperature channels, but the chip
+ will always pick the safest (max) PWM value for each fan.
+
+ In Thermal Cruise mode, the chip attempts to keep the temperature at a
+ predefined value, within a tolerance margin. So if tempX_input >
+ thermal_cruiseX + toleranceX, the chip will increase the PWM value,
+ if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease
+ the PWM value. If the temperature is within the tolerance range, the PWM
+ value is left unchanged.
+
+ SmartFanII works differently, you have to define up to 7 PWM, temperature
+ trip points, defining a PWM/temperature curve which the chip will follow.
+ While not fundamentally different from the Thermal Cruise mode, the
+ implementation is quite different, giving you a finer-grained control.
+
+* Chassis
+ If the case open alarm triggers, it will stay in this state unless cleared
+ by writing 0 to the sysfs file "intrusion0_alarm".
+
+* VID and VRM
+ The VRM version is detected automatically, don't modify the it unless you
+ *do* know the cpu VRM version and it's not properly detected.
+
+
+Notes
+-----
+
+ Only Fan1-5 and PWM1-3 are guaranteed to always exist, other fan inputs and
+ PWM outputs may or may not exist depending on the chip pin configuration.
diff --git a/Documentation/hwmon/w83795.rst b/Documentation/hwmon/w83795.rst
new file mode 100644
index 000000000..d0615e2fa
--- /dev/null
+++ b/Documentation/hwmon/w83795.rst
@@ -0,0 +1,142 @@
+Kernel driver w83795
+====================
+
+Supported chips:
+
+ * Winbond/Nuvoton W83795G
+
+ Prefix: 'w83795g'
+
+ Addresses scanned: I2C 0x2c - 0x2f
+
+ Datasheet: Available for download on nuvoton.com
+
+ * Winbond/Nuvoton W83795ADG
+
+ Prefix: 'w83795adg'
+
+ Addresses scanned: I2C 0x2c - 0x2f
+
+ Datasheet: Available for download on nuvoton.com
+
+Authors:
+ - Wei Song (Nuvoton)
+ - Jean Delvare <jdelvare@suse.de>
+
+
+Pin mapping
+-----------
+
+Here is a summary of the pin mapping for the W83795G and W83795ADG.
+This can be useful to convert data provided by board manufacturers
+into working libsensors configuration statements.
+
+
+- W83795G
+
+========= ======================= =============== ================
+Pin Name Register Sysfs attribute
+========= ======================= =============== ================
+ 13 VSEN1 (VCORE1) 10h in0
+ 14 VSEN2 (VCORE2) 11h in1
+ 15 VSEN3 (VCORE3) 12h in2
+ 16 VSEN4 13h in3
+ 17 VSEN5 14h in4
+ 18 VSEN6 15h in5
+ 19 VSEN7 16h in6
+ 20 VSEN8 17h in7
+ 21 VSEN9 18h in8
+ 22 VSEN10 19h in9
+ 23 VSEN11 1Ah in10
+ 28 VTT 1Bh in11
+ 24 3VDD 1Ch in12
+ 25 3VSB 1Dh in13
+ 26 VBAT 1Eh in14
+ 3 VSEN12/TR5 1Fh in15/temp5
+ 4 VSEN13/TR5 20h in16/temp6
+ 5/ 6 VDSEN14/TR1/TD1 21h in17/temp1
+ 7/ 8 VDSEN15/TR2/TD2 22h in18/temp2
+ 9/ 10 VDSEN16/TR3/TD3 23h in19/temp3
+ 11/ 12 VDSEN17/TR4/TD4 24h in20/temp4
+ 40 FANIN1 2Eh fan1
+ 42 FANIN2 2Fh fan2
+ 44 FANIN3 30h fan3
+ 46 FANIN4 31h fan4
+ 48 FANIN5 32h fan5
+ 50 FANIN6 33h fan6
+ 52 FANIN7 34h fan7
+ 54 FANIN8 35h fan8
+ 57 FANIN9 36h fan9
+ 58 FANIN10 37h fan10
+ 59 FANIN11 38h fan11
+ 60 FANIN12 39h fan12
+ 31 FANIN13 3Ah fan13
+ 35 FANIN14 3Bh fan14
+ 41 FANCTL1 10h (bank 2) pwm1
+ 43 FANCTL2 11h (bank 2) pwm2
+ 45 FANCTL3 12h (bank 2) pwm3
+ 47 FANCTL4 13h (bank 2) pwm4
+ 49 FANCTL5 14h (bank 2) pwm5
+ 51 FANCTL6 15h (bank 2) pwm6
+ 53 FANCTL7 16h (bank 2) pwm7
+ 55 FANCTL8 17h (bank 2) pwm8
+ 29/ 30 PECI/TSI (DTS1) 26h temp7
+ 29/ 30 PECI/TSI (DTS2) 27h temp8
+ 29/ 30 PECI/TSI (DTS3) 28h temp9
+ 29/ 30 PECI/TSI (DTS4) 29h temp10
+ 29/ 30 PECI/TSI (DTS5) 2Ah temp11
+ 29/ 30 PECI/TSI (DTS6) 2Bh temp12
+ 29/ 30 PECI/TSI (DTS7) 2Ch temp13
+ 29/ 30 PECI/TSI (DTS8) 2Dh temp14
+ 27 CASEOPEN# 46h intrusion0
+========= ======================= =============== ================
+
+- W83795ADG
+
+========= ======================= =============== ================
+Pin Name Register Sysfs attribute
+========= ======================= =============== ================
+ 10 VSEN1 (VCORE1) 10h in0
+ 11 VSEN2 (VCORE2) 11h in1
+ 12 VSEN3 (VCORE3) 12h in2
+ 13 VSEN4 13h in3
+ 14 VSEN5 14h in4
+ 15 VSEN6 15h in5
+ 16 VSEN7 16h in6
+ 17 VSEN8 17h in7
+ 22 VTT 1Bh in11
+ 18 3VDD 1Ch in12
+ 19 3VSB 1Dh in13
+ 20 VBAT 1Eh in14
+ 48 VSEN12/TR5 1Fh in15/temp5
+ 1 VSEN13/TR5 20h in16/temp6
+ 2/ 3 VDSEN14/TR1/TD1 21h in17/temp1
+ 4/ 5 VDSEN15/TR2/TD2 22h in18/temp2
+ 6/ 7 VDSEN16/TR3/TD3 23h in19/temp3
+ 8/ 9 VDSEN17/TR4/TD4 24h in20/temp4
+ 32 FANIN1 2Eh fan1
+ 34 FANIN2 2Fh fan2
+ 36 FANIN3 30h fan3
+ 37 FANIN4 31h fan4
+ 38 FANIN5 32h fan5
+ 39 FANIN6 33h fan6
+ 40 FANIN7 34h fan7
+ 41 FANIN8 35h fan8
+ 43 FANIN9 36h fan9
+ 44 FANIN10 37h fan10
+ 45 FANIN11 38h fan11
+ 46 FANIN12 39h fan12
+ 24 FANIN13 3Ah fan13
+ 28 FANIN14 3Bh fan14
+ 33 FANCTL1 10h (bank 2) pwm1
+ 35 FANCTL2 11h (bank 2) pwm2
+ 23 PECI (DTS1) 26h temp7
+ 23 PECI (DTS2) 27h temp8
+ 23 PECI (DTS3) 28h temp9
+ 23 PECI (DTS4) 29h temp10
+ 23 PECI (DTS5) 2Ah temp11
+ 23 PECI (DTS6) 2Bh temp12
+ 23 PECI (DTS7) 2Ch temp13
+ 23 PECI (DTS8) 2Dh temp14
+ 21 CASEOPEN# 46h intrusion0
+========= ======================= =============== ================
diff --git a/Documentation/hwmon/w83l785ts.rst b/Documentation/hwmon/w83l785ts.rst
new file mode 100644
index 000000000..7fa5418fe
--- /dev/null
+++ b/Documentation/hwmon/w83l785ts.rst
@@ -0,0 +1,45 @@
+Kernel driver w83l785ts
+=======================
+
+Supported chips:
+
+ * Winbond W83L785TS-S
+
+ Prefix: 'w83l785ts'
+
+ Addresses scanned: I2C 0x2e
+
+ Datasheet: Publicly available at the Winbond USA website
+
+ http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf
+
+Authors:
+ Jean Delvare <jdelvare@suse.de>
+
+Description
+-----------
+
+The W83L785TS-S is a digital temperature sensor. It senses the
+temperature of a single external diode. The high limit is
+theoretically defined as 85 or 100 degrees C through a combination
+of external resistors, so the user cannot change it. Values seen so
+far suggest that the two possible limits are actually 95 and 110
+degrees C. The datasheet is rather poor and obviously inaccurate
+on several points including this one.
+
+All temperature values are given in degrees Celsius. Resolution
+is 1.0 degree. See the datasheet for details.
+
+The w83l785ts driver will not update its values more frequently than
+every other second; reading them more often will do no harm, but will
+return 'old' values.
+
+Known Issues
+------------
+
+On some systems (Asus), the BIOS is known to interfere with the driver
+and cause read errors. Or maybe the W83L785TS-S chip is simply unreliable,
+we don't really know. The driver will retry a given number of times
+(5 by default) and then give up, returning the old value (or 0 if
+there is no old value). It seems to work well enough so that you should
+not notice anything. Thanks to James Bolt for helping test this feature.
diff --git a/Documentation/hwmon/w83l786ng.rst b/Documentation/hwmon/w83l786ng.rst
new file mode 100644
index 000000000..06234dea4
--- /dev/null
+++ b/Documentation/hwmon/w83l786ng.rst
@@ -0,0 +1,66 @@
+Kernel driver w83l786ng
+=======================
+
+Supported chips:
+
+ * Winbond W83L786NG/W83L786NR
+
+ Prefix: 'w83l786ng'
+
+ Addresses scanned: I2C 0x2e - 0x2f
+
+ Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L786NRNG09.pdf
+
+Author: Kevin Lo <kevlo@kevlo.org>
+
+
+Module Parameters
+-----------------
+
+* reset boolean
+ (default 0)
+
+ Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
+ behavior is no chip reset to preserve BIOS settings
+
+
+Description
+-----------
+
+This driver implements support for Winbond W83L786NG/W83L786NR chips.
+
+The driver implements two temperature sensors, two fan rotation speed
+sensors, and three voltage sensors.
+
+Temperatures are measured in degrees Celsius and measurement resolution is 1
+degC for temp1 and temp2.
+
+Fan rotation speeds are reported in RPM (rotations per minute). Fan readings
+can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64
+or 128 for fan 1/2) to give the readings more range or accuracy.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+/sys files
+----------
+
+pwm[1-2]
+ - this file stores PWM duty cycle or DC value (fan speed) in range:
+
+ 0 (stop) to 255 (full)
+pwm[1-2]_enable
+ - this file controls mode of fan/temperature control:
+
+ * 0 Manual Mode
+ * 1 Thermal Cruise
+ * 2 Smart Fan II
+ * 4 FAN_SET
+pwm[1-2]_mode
+ - Select PWM of DC mode
+
+ * 0 DC
+ * 1 PWM
+tolerance[1-2]
+ - Value in degrees of Celsius (degC) for +- T
diff --git a/Documentation/hwmon/wm831x.rst b/Documentation/hwmon/wm831x.rst
new file mode 100644
index 000000000..c56fb35a2
--- /dev/null
+++ b/Documentation/hwmon/wm831x.rst
@@ -0,0 +1,40 @@
+Kernel driver wm831x-hwmon
+==========================
+
+Supported chips:
+ * Wolfson Microelectronics WM831x PMICs
+
+ Prefix: 'wm831x'
+
+ Datasheet:
+
+ - http://www.wolfsonmicro.com/products/WM8310
+ - http://www.wolfsonmicro.com/products/WM8311
+ - http://www.wolfsonmicro.com/products/WM8312
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM831x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system. Currently the driver provides
+reporting of all the input values but does not provide any alarms.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC. Voltages in millivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures
+are available. The chip temperature is calculated as:
+
+ Degrees celsius = (512.18 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+thermistor component.
diff --git a/Documentation/hwmon/wm8350.rst b/Documentation/hwmon/wm8350.rst
new file mode 100644
index 000000000..cec044ca5
--- /dev/null
+++ b/Documentation/hwmon/wm8350.rst
@@ -0,0 +1,30 @@
+Kernel driver wm8350-hwmon
+==========================
+
+Supported chips:
+
+ * Wolfson Microelectronics WM835x PMICs
+
+ Prefix: 'wm8350'
+
+ Datasheet:
+
+ - http://www.wolfsonmicro.com/products/WM8350
+ - http://www.wolfsonmicro.com/products/WM8351
+ - http://www.wolfsonmicro.com/products/WM8352
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM835x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system. Currently the driver provides
+simple access to these major supplies.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC. For the internal supplies the ADC
+is referenced to the system VRTC.
diff --git a/Documentation/hwmon/xdpe12284.rst b/Documentation/hwmon/xdpe12284.rst
new file mode 100644
index 000000000..a224dc74a
--- /dev/null
+++ b/Documentation/hwmon/xdpe12284.rst
@@ -0,0 +1,106 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver xdpe122
+=====================
+
+Supported chips:
+
+ * Infineon XDPE11280
+
+ Prefix: 'xdpe11280'
+
+ * Infineon XDPE12254
+
+ Prefix: 'xdpe12254'
+
+ * Infineon XDPE12284
+
+ Prefix: 'xdpe12284'
+
+Authors:
+
+ Vadim Pasternak <vadimp@mellanox.com>
+
+Description
+-----------
+
+This driver implements support for Infineon Multi-phase XDPE112 and XDPE122
+family dual loop voltage regulators.
+These families include XDPE11280, XDPE12284 and XDPE12254 devices.
+The devices from this family compliant with:
+
+- Intel VR13 and VR13HC rev 1.3, IMVP8 rev 1.2 and IMPVP9 rev 1.3 DC-DC
+ converter specification.
+- Intel SVID rev 1.9. protocol.
+- PMBus rev 1.3 interface.
+
+Devices support linear format for reading input voltage, input and output current,
+input and output power and temperature.
+Device supports VID format for reading output voltage. The below modes are
+supported:
+- VR12.0 mode, 5-mV DAC - 0x01.
+- VR12.5 mode, 10-mV DAC - 0x02.
+- IMVP9 mode, 5-mV DAC - 0x03.
+- AMD mode 6.25mV - 0x10.
+
+Devices support two pages for telemetry.
+
+The driver provides for current: input, maximum and critical thresholds
+and maximum and critical alarms. Critical thresholds and critical alarm are
+supported only for current output.
+The driver exports the following attributes for via the sysfs files, where
+indexes 1, 2 are for "iin" and 3, 4 for "iout":
+
+**curr[3-4]_crit**
+
+**curr[3-4]_crit_alarm**
+
+**curr[1-4]_input**
+
+**curr[1-4]_label**
+
+**curr[1-4]_max**
+
+**curr[1-4]_max_alarm**
+
+The driver provides for voltage: input, critical and low critical thresholds
+and critical and low critical alarms.
+The driver exports the following attributes for via the sysfs files, where
+indexes 1, 2 are for "vin" and 3, 4 for "vout":
+
+**in[1-4]_crit**
+
+**in[1-4_crit_alarm**
+
+**in[1-4]_input**
+
+**in[1-4_label**
+
+**in[1-4]_lcrit**
+
+**in[1-41_lcrit_alarm**
+
+The driver provides for power: input and alarms. Power alarm is supported only
+for power input.
+The driver exports the following attributes for via the sysfs files, where
+indexes 1, 2 are for "pin" and 3, 4 for "pout":
+
+**power[1-2]_alarm**
+
+**power[1-4]_input**
+
+**power[1-4]_label**
+
+The driver provides for temperature: input, maximum and critical thresholds
+and maximum and critical alarms.
+The driver exports the following attributes for via the sysfs files:
+
+**temp[1-2]_crit**
+
+**temp[1-2]_crit_alarm**
+
+**temp[1-2]_input**
+
+**temp[1-2]_max**
+
+**temp[1-2]_max_alarm**
diff --git a/Documentation/hwmon/xdpe152c4.rst b/Documentation/hwmon/xdpe152c4.rst
new file mode 100644
index 000000000..ab92c32d4
--- /dev/null
+++ b/Documentation/hwmon/xdpe152c4.rst
@@ -0,0 +1,118 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver xdpe152
+=====================
+
+Supported chips:
+
+ * Infineon XDPE152C4
+
+ Prefix: 'xdpe152c4'
+
+ * Infineon XDPE15284
+
+ Prefix: 'xdpe15284'
+
+Authors:
+
+ Greg Schwendimann <greg.schwendimann@infineon.com>
+
+Description
+-----------
+
+This driver implements support for Infineon Digital Multi-phase Controller
+XDPE152C4 and XDPE15284 dual loop voltage regulators.
+The devices are compliant with:
+
+- Intel VR13, VR13HC and VR14 rev 1.86
+ converter specification.
+- Intel SVID rev 1.93. protocol.
+- PMBus rev 1.3.1 interface.
+
+Devices support linear format for reading input and output voltage, input
+and output current, input and output power and temperature.
+
+Devices support two pages for telemetry.
+
+The driver provides for current: input, maximum and critical thresholds
+and maximum and critical alarms. Low Critical thresholds and Low critical alarm are
+supported only for current output.
+The driver exports the following attributes for via the sysfs files, where
+indexes 1, 2 are for "iin" and 3, 4 for "iout":
+
+**curr[1-4]_crit**
+
+**curr[1-4]_crit_alarm**
+
+**curr[1-4]_input**
+
+**curr[1-4]_label**
+
+**curr[1-4]_max**
+
+**curr[1-4]_max_alarm**
+
+**curr[3-4]_lcrit**
+
+**curr[3-4]_lcrit_alarm**
+
+**curr[3-4]_rated_max**
+
+The driver provides for voltage: input, critical and low critical thresholds
+and critical and low critical alarms.
+The driver exports the following attributes for via the sysfs files, where
+indexes 1, 2 are for "vin" and 3, 4 for "vout":
+
+**in[1-4]_min**
+
+**in[1-4]_crit**
+
+**in[1-4_crit_alarm**
+
+**in[1-4]_input**
+
+**in[1-4]_label**
+
+**in[1-4]_max**
+
+**in[1-4]_max_alarm**
+
+**in[1-4]_min**
+
+**in[1-4]_min_alarm**
+
+**in[3-4]_lcrit**
+
+**in[3-4]_lcrit_alarm**
+
+**in[3-4]_rated_max**
+
+**in[3-4]_rated_min**
+
+The driver provides for power: input and alarms.
+The driver exports the following attributes for via the sysfs files, where
+indexes 1, 2 are for "pin" and 3, 4 for "pout":
+
+**power[1-2]_alarm**
+
+**power[1-4]_input**
+
+**power[1-4]_label**
+
+**power[1-4]_max**
+
+**power[1-4]_rated_max**
+
+The driver provides for temperature: input, maximum and critical thresholds
+and maximum and critical alarms.
+The driver exports the following attributes for via the sysfs files:
+
+**temp[1-2]_crit**
+
+**temp[1-2]_crit_alarm**
+
+**temp[1-2]_input**
+
+**temp[1-2]_max**
+
+**temp[1-2]_max_alarm**
diff --git a/Documentation/hwmon/xgene-hwmon.rst b/Documentation/hwmon/xgene-hwmon.rst
new file mode 100644
index 000000000..439b30b88
--- /dev/null
+++ b/Documentation/hwmon/xgene-hwmon.rst
@@ -0,0 +1,36 @@
+Kernel driver xgene-hwmon
+=========================
+
+Supported chips:
+
+ * APM X-Gene SoC
+
+Description
+-----------
+
+This driver adds hardware temperature and power reading support for
+APM X-Gene SoC using the mailbox communication interface.
+For device tree, it is the standard DT mailbox.
+For ACPI, it is the PCC mailbox.
+
+The following sensors are supported
+
+ * Temperature
+ - SoC on-die temperature in milli-degree C
+ - Alarm when high/over temperature occurs
+
+ * Power
+ - CPU power in uW
+ - IO power in uW
+
+sysfs-Interface
+---------------
+
+temp0_input
+ - SoC on-die temperature (milli-degree C)
+temp0_critical_alarm
+ - An 1 would indicates on-die temperature exceeded threshold
+power0_input
+ - CPU power in (uW)
+power1_input
+ - IO power in (uW)
diff --git a/Documentation/hwmon/zl6100.rst b/Documentation/hwmon/zl6100.rst
new file mode 100644
index 000000000..d42ed9d3a
--- /dev/null
+++ b/Documentation/hwmon/zl6100.rst
@@ -0,0 +1,259 @@
+Kernel driver zl6100
+====================
+
+Supported chips:
+
+ * Renesas / Intersil / Zilker Labs ZL2004
+
+ Prefix: 'zl2004'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl2004-datasheet.pdf
+
+ * Renesas / Intersil / Zilker Labs ZL2005
+
+ Prefix: 'zl2005'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl2005-datasheet.pdf
+
+ * Renesas / Intersil / Zilker Labs ZL2006
+
+ Prefix: 'zl2006'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl2006-datasheet.pdf
+
+ * Renesas / Intersil / Zilker Labs ZL2008
+
+ Prefix: 'zl2008'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl2008-datasheet.pdf
+
+ * Renesas / Intersil / Zilker Labs ZL2105
+
+ Prefix: 'zl2105'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl2105-datasheet.pdf
+
+ * Renesas / Intersil / Zilker Labs ZL2106
+
+ Prefix: 'zl2106'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl2106-datasheet.pdf
+
+ * Renesas / Intersil / Zilker Labs ZL6100
+
+ Prefix: 'zl6100'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl6100-datasheet.pdf
+
+ * Renesas / Intersil / Zilker Labs ZL6105
+
+ Prefix: 'zl6105'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl6105-datasheet.pdf
+
+ * Renesas / Intersil / Zilker Labs ZL8802
+
+ Prefix: 'zl8802'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl8802-datasheet
+
+ * Renesas / Intersil / Zilker Labs ZL9101M
+
+ Prefix: 'zl9101'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl9101m-datasheet
+
+ * Renesas / Intersil / Zilker Labs ZL9117M
+
+ Prefix: 'zl9117'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.renesas.com/us/en/document/dst/zl9117m-datasheet
+
+ * Renesas / Intersil / Zilker Labs ZLS1003, ZLS4009
+
+ Prefix: 'zls1003', zls4009
+
+ Addresses scanned: -
+
+ Datasheet: Not published
+
+ * Flex BMR450, BMR451
+
+ Prefix: 'bmr450', 'bmr451'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+https://flexpowermodules.com/resources/fpm-techspec-bmr450-digital-pol-regulators-20a
+
+ * Flex BMR462, BMR463, BMR464
+
+ Prefixes: 'bmr462', 'bmr463', 'bmr464'
+
+ Addresses scanned: -
+
+ Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr462
+
+ * Flex BMR465, BMR467
+
+ Prefixes: 'bmr465', 'bmr467'
+
+ Addresses scanned: -
+
+ Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr465-digital-pol
+
+ * Flex BMR466
+
+ Prefixes: 'bmr466'
+
+ Addresses scanned: -
+
+ Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr466-8x12
+
+ * Flex BMR469
+
+ Prefixes: 'bmr469'
+
+ Addresses scanned: -
+
+ Datasheet: https://flexpowermodules.com/resources/fpm-techspec-bmr4696001
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Renesas / Intersil / Zilker Labs
+ZL6100 and compatible digital DC-DC controllers.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+.. warning::
+
+ Do not access chip registers using the i2cdump command, and do not use
+ any of the i2ctools commands on a command register used to save and restore
+ configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by
+ this driver interpret any access to those command registers (including read
+ commands) as request to execute the command in question. Unless write accesses
+ to those registers are protected, this may result in power loss, board resets,
+ and/or Flash corruption. Worst case, your board may turn into a brick.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Module parameters
+-----------------
+
+delay
+-----
+
+Renesas/Intersil/Zilker Labs DC-DC controllers require a minimum interval
+between I2C bus accesses. According to Intersil, the minimum interval is 2 ms,
+though 1 ms appears to be sufficient and has not caused any problems in testing.
+The problem is known to affect all currently supported chips. For manual override,
+the driver provides a writeable module parameter, 'delay', which can be used
+to set the interval to a value between 0 and 65,535 microseconds.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+in1_label "vin"
+in1_input Measured input voltage.
+in1_min Minimum input voltage.
+in1_max Maximum input voltage.
+in1_lcrit Critical minimum input voltage.
+in1_crit Critical maximum input voltage.
+in1_min_alarm Input voltage low alarm.
+in1_max_alarm Input voltage high alarm.
+in1_lcrit_alarm Input voltage critical low alarm.
+in1_crit_alarm Input voltage critical high alarm.
+
+in2_label "vmon"
+in2_input Measured voltage on VMON (ZL2004) or VDRV (ZL9101M,
+ ZL9117M) pin. Reported voltage is 16x the voltage on the
+ pin (adjusted internally by the chip).
+in2_lcrit Critical minimum VMON/VDRV Voltage.
+in2_crit Critical maximum VMON/VDRV voltage.
+in2_lcrit_alarm VMON/VDRV voltage critical low alarm.
+in2_crit_alarm VMON/VDRV voltage critical high alarm.
+
+ vmon attributes are supported on ZL2004, ZL8802,
+ ZL9101M, ZL9117M and ZLS4009 only.
+
+inX_label "vout[12]"
+inX_input Measured output voltage.
+inX_lcrit Critical minimum output Voltage.
+inX_crit Critical maximum output voltage.
+inX_lcrit_alarm Critical output voltage critical low alarm.
+inX_crit_alarm Critical output voltage critical high alarm.
+
+ X is 3 for ZL2004, ZL9101M, and ZL9117M,
+ 3, 4 for ZL8802 and 2 otherwise.
+
+curr1_label "iin"
+curr1_input Measured input current.
+
+ iin attributes are supported on ZL8802 only
+
+currY_label "iout[12]"
+currY_input Measured output current.
+currY_lcrit Critical minimum output current.
+currY_crit Critical maximum output current.
+currY_lcrit_alarm Output current critical low alarm.
+currY_crit_alarm Output current critical high alarm.
+
+ Y is 2, 3 for ZL8802, 1 otherwise
+
+temp[12]_input Measured temperature.
+temp[12]_min Minimum temperature.
+temp[12]_max Maximum temperature.
+temp[12]_lcrit Critical low temperature.
+temp[12]_crit Critical high temperature.
+temp[12]_min_alarm Chip temperature low alarm.
+temp[12]_max_alarm Chip temperature high alarm.
+temp[12]_lcrit_alarm Chip temperature critical low alarm.
+temp[12]_crit_alarm Chip temperature critical high alarm.
+======================= ========================================================