Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 161 insertions, 0 deletions

diff --git a/arch/arm64/kvm/hyp/nvhe/tlb.c b/arch/arm64/kvm/hyp/nvhe/tlb.c
new file mode 100644
index 000000000..d296d617f
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/tlb.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/tlbflush.h>
+
+#include <nvhe/mem_protect.h>
+
+struct tlb_inv_context {
+	u64		tcr;
+};
+
+static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu,
+				  struct tlb_inv_context *cxt)
+{
+	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
+		u64 val;
+
+		/*
+		 * For CPUs that are affected by ARM 1319367, we need to
+		 * avoid a host Stage-1 walk while we have the guest's
+		 * VMID set in the VTTBR in order to invalidate TLBs.
+		 * We're guaranteed that the S1 MMU is enabled, so we can
+		 * simply set the EPD bits to avoid any further TLB fill.
+		 */
+		val = cxt->tcr = read_sysreg_el1(SYS_TCR);
+		val |= TCR_EPD1_MASK | TCR_EPD0_MASK;
+		write_sysreg_el1(val, SYS_TCR);
+		isb();
+	}
+
+	/*
+	 * __load_stage2() includes an ISB only when the AT
+	 * workaround is applied. Take care of the opposite condition,
+	 * ensuring that we always have an ISB, but not two ISBs back
+	 * to back.
+	 */
+	__load_stage2(mmu, kern_hyp_va(mmu->arch));
+	asm(ALTERNATIVE("isb", "nop", ARM64_WORKAROUND_SPECULATIVE_AT));
+}
+
+static void __tlb_switch_to_host(struct tlb_inv_context *cxt)
+{
+	__load_host_stage2();
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
+		/* Ensure write of the host VMID */
+		isb();
+		/* Restore the host's TCR_EL1 */
+		write_sysreg_el1(cxt->tcr, SYS_TCR);
+	}
+}
+
+void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu,
+			      phys_addr_t ipa, int level)
+{
+	struct tlb_inv_context cxt;
+
+	dsb(ishst);
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt);
+
+	/*
+	 * We could do so much better if we had the VA as well.
+	 * Instead, we invalidate Stage-2 for this IPA, and the
+	 * whole of Stage-1. Weep...
+	 */
+	ipa >>= 12;
+	__tlbi_level(ipas2e1is, ipa, level);
+
+	/*
+	 * We have to ensure completion of the invalidation at Stage-2,
+	 * since a table walk on another CPU could refill a TLB with a
+	 * complete (S1 + S2) walk based on the old Stage-2 mapping if
+	 * the Stage-1 invalidation happened first.
+	 */
+	dsb(ish);
+	__tlbi(vmalle1is);
+	dsb(ish);
+	isb();
+
+	/*
+	 * If the host is running at EL1 and we have a VPIPT I-cache,
+	 * then we must perform I-cache maintenance at EL2 in order for
+	 * it to have an effect on the guest. Since the guest cannot hit
+	 * I-cache lines allocated with a different VMID, we don't need
+	 * to worry about junk out of guest reset (we nuke the I-cache on
+	 * VMID rollover), but we do need to be careful when remapping
+	 * executable pages for the same guest. This can happen when KSM
+	 * takes a CoW fault on an executable page, copies the page into
+	 * a page that was previously mapped in the guest and then needs
+	 * to invalidate the guest view of the I-cache for that page
+	 * from EL1. To solve this, we invalidate the entire I-cache when
+	 * unmapping a page from a guest if we have a VPIPT I-cache but
+	 * the host is running at EL1. As above, we could do better if
+	 * we had the VA.
+	 *
+	 * The moral of this story is: if you have a VPIPT I-cache, then
+	 * you should be running with VHE enabled.
+	 */
+	if (icache_is_vpipt())
+		icache_inval_all_pou();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu)
+{
+	struct tlb_inv_context cxt;
+
+	dsb(ishst);
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt);
+
+	__tlbi(vmalls12e1is);
+	dsb(ish);
+	isb();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_flush_cpu_context(struct kvm_s2_mmu *mmu)
+{
+	struct tlb_inv_context cxt;
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt);
+
+	__tlbi(vmalle1);
+	asm volatile("ic iallu");
+	dsb(nsh);
+	isb();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_flush_vm_context(void)
+{
+	dsb(ishst);
+	__tlbi(alle1is);
+
+	/*
+	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
+	 * is necessary across a VMID rollover.
+	 *
+	 * VPIPT caches constrain lookup and maintenance to the active VMID,
+	 * so we need to invalidate lines with a stale VMID to avoid an ABA
+	 * race after multiple rollovers.
+	 *
+	 */
+	if (icache_is_vpipt())
+		asm volatile("ic ialluis");
+
+	dsb(ish);
+}