Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 142 insertions, 0 deletions

diff --git a/arch/mips/boot/dts/xilfpga/Makefile b/arch/mips/boot/dts/xilfpga/Makefile
new file mode 100644
index 000000000..69ca00590
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= nexys4ddr.dtb
diff --git a/arch/mips/boot/dts/xilfpga/microAptiv.dtsi b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
new file mode 100644
index 000000000..87b2b1f9a
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "img,xilfpga";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,m14Kc";
+			clocks	= <&ext>;
+			reg = <0>;
+		};
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
new file mode 100644
index 000000000..cc8dbea09
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "microAptiv.dtsi"
+
+/ {
+	compatible = "digilent,nexys4ddr";
+
+	aliases {
+		serial0 = &axi_uart16550;
+	};
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	axi_intc: interrupt-controller@10200000 {
+		#interrupt-cells = <1>;
+		compatible = "xlnx,xps-intc-1.00.a";
+		interrupt-controller;
+		reg = <0x10200000 0x10000>;
+		xlnx,kind-of-intr = <0x0>;
+		xlnx,num-intr-inputs = <0x6>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+	};
+
+	axi_gpio: gpio@10600000 {
+		#gpio-cells = <1>;
+		compatible = "xlnx,xps-gpio-1.00.a";
+		gpio-controller;
+		reg = <0x10600000 0x10000>;
+		xlnx,all-inputs = <0x0>;
+		xlnx,dout-default = <0x0>;
+		xlnx,gpio-width = <0x16>;
+		xlnx,interrupt-present = <0x0>;
+		xlnx,is-dual = <0x0>;
+		xlnx,tri-default = <0xffffffff>;
+	} ;
+
+	axi_ethernetlite: ethernet@10e00000 {
+		compatible = "xlnx,xps-ethernetlite-3.00.a";
+		device_type = "network";
+		interrupt-parent = <&axi_intc>;
+		interrupts = <1>;
+		phy-handle = <&phy0>;
+		reg = <0x10e00000 0x10000>;
+		xlnx,duplex = <0x1>;
+		xlnx,include-global-buffers = <0x1>;
+		xlnx,include-internal-loopback = <0x0>;
+		xlnx,include-mdio = <0x1>;
+		xlnx,instance = "axi_ethernetlite_inst";
+		xlnx,rx-ping-pong = <0x1>;
+		xlnx,s-axi-id-width = <0x1>;
+		xlnx,tx-ping-pong = <0x1>;
+		xlnx,use-internal = <0x0>;
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: phy@1 {
+				device_type = "ethernet-phy";
+				reg = <1>;
+			};
+		};
+	};
+
+	axi_uart16550: serial@10400000 {
+		compatible = "ns16550a";
+		reg = <0x10400000 0x10000>;
+
+		reg-shift = <2>;
+		reg-offset = <0x1000>;
+
+		clocks	= <&ext>;
+
+		interrupt-parent = <&axi_intc>;
+		interrupts = <0>;
+	};
+
+	axi_i2c: i2c@10a00000 {
+	    compatible = "xlnx,xps-iic-2.00.a";
+	    interrupt-parent = <&axi_intc>;
+	    interrupts = <4>;
+	    reg = < 0x10a00000 0x10000 >;
+	    clocks = <&ext>;
+	    xlnx,clk-freq = <0x5f5e100>;
+	    xlnx,family = "Artix7";
+	    xlnx,gpo-width = <0x1>;
+	    xlnx,iic-freq = <0x186a0>;
+	    xlnx,scl-inertial-delay = <0x0>;
+	    xlnx,sda-inertial-delay = <0x0>;
+	    xlnx,ten-bit-adr = <0x0>;
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    ad7420@4b {
+		compatible = "adi,adt7420";
+		reg = <0x4b>;
+	    };
+	} ;
+};
+
+&ext {
+	clock-frequency = <50000000>;
+};