Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 881 insertions, 0 deletions

diff --git a/arch/mips/loongson64/smp.c b/arch/mips/loongson64/smp.c
new file mode 100644
index 000000000..660e1de44
--- /dev/null
+++ b/arch/mips/loongson64/smp.c
@@ -0,0 +1,881 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2010, 2011, 2012, Lemote, Inc.
+ * Author: Chen Huacai, chenhc@lemote.com
+ */
+
+#include <irq.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
+#include <linux/sched/hotplug.h>
+#include <linux/sched/task_stack.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/kexec.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <loongson.h>
+#include <loongson_regs.h>
+#include <workarounds.h>
+
+#include "smp.h"
+
+DEFINE_PER_CPU(int, cpu_state);
+
+#define LS_IPI_IRQ (MIPS_CPU_IRQ_BASE + 6)
+
+static void *ipi_set0_regs[16];
+static void *ipi_clear0_regs[16];
+static void *ipi_status0_regs[16];
+static void *ipi_en0_regs[16];
+static void *ipi_mailbox_buf[16];
+static uint32_t core0_c0count[NR_CPUS];
+
+/* read a 32bit value from ipi register */
+#define loongson3_ipi_read32(addr) readl(addr)
+/* read a 64bit value from ipi register */
+#define loongson3_ipi_read64(addr) readq(addr)
+/* write a 32bit value to ipi register */
+#define loongson3_ipi_write32(action, addr)	\
+	do {					\
+		writel(action, addr);		\
+		__wbflush();			\
+	} while (0)
+/* write a 64bit value to ipi register */
+#define loongson3_ipi_write64(action, addr)	\
+	do {					\
+		writeq(action, addr);		\
+		__wbflush();			\
+	} while (0)
+
+static u32 (*ipi_read_clear)(int cpu);
+static void (*ipi_write_action)(int cpu, u32 action);
+static void (*ipi_write_enable)(int cpu);
+static void (*ipi_clear_buf)(int cpu);
+static void (*ipi_write_buf)(int cpu, struct task_struct *idle);
+
+/* send mail via Mail_Send register for 3A4000+ CPU */
+static void csr_mail_send(uint64_t data, int cpu, int mailbox)
+{
+	uint64_t val;
+
+	/* send high 32 bits */
+	val = CSR_MAIL_SEND_BLOCK;
+	val |= (CSR_MAIL_SEND_BOX_HIGH(mailbox) << CSR_MAIL_SEND_BOX_SHIFT);
+	val |= (cpu << CSR_MAIL_SEND_CPU_SHIFT);
+	val |= (data & CSR_MAIL_SEND_H32_MASK);
+	csr_writeq(val, LOONGSON_CSR_MAIL_SEND);
+
+	/* send low 32 bits */
+	val = CSR_MAIL_SEND_BLOCK;
+	val |= (CSR_MAIL_SEND_BOX_LOW(mailbox) << CSR_MAIL_SEND_BOX_SHIFT);
+	val |= (cpu << CSR_MAIL_SEND_CPU_SHIFT);
+	val |= (data << CSR_MAIL_SEND_BUF_SHIFT);
+	csr_writeq(val, LOONGSON_CSR_MAIL_SEND);
+};
+
+static u32 csr_ipi_read_clear(int cpu)
+{
+	u32 action;
+
+	/* Load the ipi register to figure out what we're supposed to do */
+	action = csr_readl(LOONGSON_CSR_IPI_STATUS);
+	/* Clear the ipi register to clear the interrupt */
+	csr_writel(action, LOONGSON_CSR_IPI_CLEAR);
+
+	return action;
+}
+
+static void csr_ipi_write_action(int cpu, u32 action)
+{
+	unsigned int irq = 0;
+
+	while ((irq = ffs(action))) {
+		uint32_t val = CSR_IPI_SEND_BLOCK;
+		val |= (irq - 1);
+		val |= (cpu << CSR_IPI_SEND_CPU_SHIFT);
+		csr_writel(val, LOONGSON_CSR_IPI_SEND);
+		action &= ~BIT(irq - 1);
+	}
+}
+
+static void csr_ipi_write_enable(int cpu)
+{
+	csr_writel(0xffffffff, LOONGSON_CSR_IPI_EN);
+}
+
+static void csr_ipi_clear_buf(int cpu)
+{
+	csr_writeq(0, LOONGSON_CSR_MAIL_BUF0);
+}
+
+static void csr_ipi_write_buf(int cpu, struct task_struct *idle)
+{
+	unsigned long startargs[4];
+
+	/* startargs[] are initial PC, SP and GP for secondary CPU */
+	startargs[0] = (unsigned long)&smp_bootstrap;
+	startargs[1] = (unsigned long)__KSTK_TOS(idle);
+	startargs[2] = (unsigned long)task_thread_info(idle);
+	startargs[3] = 0;
+
+	pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n",
+		cpu, startargs[0], startargs[1], startargs[2]);
+
+	csr_mail_send(startargs[3], cpu_logical_map(cpu), 3);
+	csr_mail_send(startargs[2], cpu_logical_map(cpu), 2);
+	csr_mail_send(startargs[1], cpu_logical_map(cpu), 1);
+	csr_mail_send(startargs[0], cpu_logical_map(cpu), 0);
+}
+
+static u32 legacy_ipi_read_clear(int cpu)
+{
+	u32 action;
+
+	/* Load the ipi register to figure out what we're supposed to do */
+	action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]);
+	/* Clear the ipi register to clear the interrupt */
+	loongson3_ipi_write32(action, ipi_clear0_regs[cpu_logical_map(cpu)]);
+
+	return action;
+}
+
+static void legacy_ipi_write_action(int cpu, u32 action)
+{
+	loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]);
+}
+
+static void legacy_ipi_write_enable(int cpu)
+{
+	loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(cpu)]);
+}
+
+static void legacy_ipi_clear_buf(int cpu)
+{
+	loongson3_ipi_write64(0, ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
+}
+
+static void legacy_ipi_write_buf(int cpu, struct task_struct *idle)
+{
+	unsigned long startargs[4];
+
+	/* startargs[] are initial PC, SP and GP for secondary CPU */
+	startargs[0] = (unsigned long)&smp_bootstrap;
+	startargs[1] = (unsigned long)__KSTK_TOS(idle);
+	startargs[2] = (unsigned long)task_thread_info(idle);
+	startargs[3] = 0;
+
+	pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n",
+			cpu, startargs[0], startargs[1], startargs[2]);
+
+	loongson3_ipi_write64(startargs[3],
+			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x18);
+	loongson3_ipi_write64(startargs[2],
+			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x10);
+	loongson3_ipi_write64(startargs[1],
+			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x8);
+	loongson3_ipi_write64(startargs[0],
+			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
+}
+
+static void csr_ipi_probe(void)
+{
+	if (cpu_has_csr() && csr_readl(LOONGSON_CSR_FEATURES) & LOONGSON_CSRF_IPI) {
+		ipi_read_clear = csr_ipi_read_clear;
+		ipi_write_action = csr_ipi_write_action;
+		ipi_write_enable = csr_ipi_write_enable;
+		ipi_clear_buf = csr_ipi_clear_buf;
+		ipi_write_buf = csr_ipi_write_buf;
+	} else {
+		ipi_read_clear = legacy_ipi_read_clear;
+		ipi_write_action = legacy_ipi_write_action;
+		ipi_write_enable = legacy_ipi_write_enable;
+		ipi_clear_buf = legacy_ipi_clear_buf;
+		ipi_write_buf = legacy_ipi_write_buf;
+	}
+}
+
+static void ipi_set0_regs_init(void)
+{
+	ipi_set0_regs[0] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + SET0);
+	ipi_set0_regs[1] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + SET0);
+	ipi_set0_regs[2] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + SET0);
+	ipi_set0_regs[3] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + SET0);
+	ipi_set0_regs[4] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + SET0);
+	ipi_set0_regs[5] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + SET0);
+	ipi_set0_regs[6] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + SET0);
+	ipi_set0_regs[7] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + SET0);
+	ipi_set0_regs[8] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + SET0);
+	ipi_set0_regs[9] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + SET0);
+	ipi_set0_regs[10] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + SET0);
+	ipi_set0_regs[11] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + SET0);
+	ipi_set0_regs[12] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + SET0);
+	ipi_set0_regs[13] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + SET0);
+	ipi_set0_regs[14] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + SET0);
+	ipi_set0_regs[15] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + SET0);
+}
+
+static void ipi_clear0_regs_init(void)
+{
+	ipi_clear0_regs[0] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + CLEAR0);
+	ipi_clear0_regs[1] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + CLEAR0);
+	ipi_clear0_regs[2] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + CLEAR0);
+	ipi_clear0_regs[3] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + CLEAR0);
+	ipi_clear0_regs[4] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + CLEAR0);
+	ipi_clear0_regs[5] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + CLEAR0);
+	ipi_clear0_regs[6] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + CLEAR0);
+	ipi_clear0_regs[7] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + CLEAR0);
+	ipi_clear0_regs[8] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + CLEAR0);
+	ipi_clear0_regs[9] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + CLEAR0);
+	ipi_clear0_regs[10] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + CLEAR0);
+	ipi_clear0_regs[11] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + CLEAR0);
+	ipi_clear0_regs[12] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + CLEAR0);
+	ipi_clear0_regs[13] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + CLEAR0);
+	ipi_clear0_regs[14] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + CLEAR0);
+	ipi_clear0_regs[15] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + CLEAR0);
+}
+
+static void ipi_status0_regs_init(void)
+{
+	ipi_status0_regs[0] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + STATUS0);
+	ipi_status0_regs[1] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + STATUS0);
+	ipi_status0_regs[2] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + STATUS0);
+	ipi_status0_regs[3] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + STATUS0);
+	ipi_status0_regs[4] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + STATUS0);
+	ipi_status0_regs[5] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + STATUS0);
+	ipi_status0_regs[6] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + STATUS0);
+	ipi_status0_regs[7] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + STATUS0);
+	ipi_status0_regs[8] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + STATUS0);
+	ipi_status0_regs[9] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + STATUS0);
+	ipi_status0_regs[10] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + STATUS0);
+	ipi_status0_regs[11] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + STATUS0);
+	ipi_status0_regs[12] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + STATUS0);
+	ipi_status0_regs[13] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + STATUS0);
+	ipi_status0_regs[14] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + STATUS0);
+	ipi_status0_regs[15] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + STATUS0);
+}
+
+static void ipi_en0_regs_init(void)
+{
+	ipi_en0_regs[0] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + EN0);
+	ipi_en0_regs[1] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + EN0);
+	ipi_en0_regs[2] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + EN0);
+	ipi_en0_regs[3] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + EN0);
+	ipi_en0_regs[4] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + EN0);
+	ipi_en0_regs[5] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + EN0);
+	ipi_en0_regs[6] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + EN0);
+	ipi_en0_regs[7] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + EN0);
+	ipi_en0_regs[8] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + EN0);
+	ipi_en0_regs[9] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + EN0);
+	ipi_en0_regs[10] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + EN0);
+	ipi_en0_regs[11] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + EN0);
+	ipi_en0_regs[12] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + EN0);
+	ipi_en0_regs[13] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + EN0);
+	ipi_en0_regs[14] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + EN0);
+	ipi_en0_regs[15] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + EN0);
+}
+
+static void ipi_mailbox_buf_init(void)
+{
+	ipi_mailbox_buf[0] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + BUF);
+	ipi_mailbox_buf[1] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + BUF);
+	ipi_mailbox_buf[2] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + BUF);
+	ipi_mailbox_buf[3] = (void *)
+		(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + BUF);
+	ipi_mailbox_buf[4] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + BUF);
+	ipi_mailbox_buf[5] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + BUF);
+	ipi_mailbox_buf[6] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + BUF);
+	ipi_mailbox_buf[7] = (void *)
+		(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + BUF);
+	ipi_mailbox_buf[8] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + BUF);
+	ipi_mailbox_buf[9] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + BUF);
+	ipi_mailbox_buf[10] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + BUF);
+	ipi_mailbox_buf[11] = (void *)
+		(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + BUF);
+	ipi_mailbox_buf[12] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + BUF);
+	ipi_mailbox_buf[13] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + BUF);
+	ipi_mailbox_buf[14] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + BUF);
+	ipi_mailbox_buf[15] = (void *)
+		(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + BUF);
+}
+
+/*
+ * Simple enough, just poke the appropriate ipi register
+ */
+static void loongson3_send_ipi_single(int cpu, unsigned int action)
+{
+	ipi_write_action(cpu_logical_map(cpu), (u32)action);
+}
+
+static void
+loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu(i, mask)
+		ipi_write_action(cpu_logical_map(i), (u32)action);
+}
+
+
+static irqreturn_t loongson3_ipi_interrupt(int irq, void *dev_id)
+{
+	int i, cpu = smp_processor_id();
+	unsigned int action, c0count;
+
+	action = ipi_read_clear(cpu);
+
+	if (action & SMP_RESCHEDULE_YOURSELF)
+		scheduler_ipi();
+
+	if (action & SMP_CALL_FUNCTION) {
+		irq_enter();
+		generic_smp_call_function_interrupt();
+		irq_exit();
+	}
+
+	if (action & SMP_ASK_C0COUNT) {
+		BUG_ON(cpu != 0);
+		c0count = read_c0_count();
+		c0count = c0count ? c0count : 1;
+		for (i = 1; i < nr_cpu_ids; i++)
+			core0_c0count[i] = c0count;
+		__wbflush(); /* Let others see the result ASAP */
+	}
+
+	return IRQ_HANDLED;
+}
+
+#define MAX_LOOPS 800
+/*
+ * SMP init and finish on secondary CPUs
+ */
+static void loongson3_init_secondary(void)
+{
+	int i;
+	uint32_t initcount;
+	unsigned int cpu = smp_processor_id();
+	unsigned int imask = STATUSF_IP7 | STATUSF_IP6 |
+			     STATUSF_IP3 | STATUSF_IP2;
+
+	/* Set interrupt mask, but don't enable */
+	change_c0_status(ST0_IM, imask);
+	ipi_write_enable(cpu);
+
+	per_cpu(cpu_state, cpu) = CPU_ONLINE;
+	cpu_set_core(&cpu_data[cpu],
+		     cpu_logical_map(cpu) % loongson_sysconf.cores_per_package);
+	cpu_data[cpu].package =
+		cpu_logical_map(cpu) / loongson_sysconf.cores_per_package;
+
+	i = 0;
+	core0_c0count[cpu] = 0;
+	loongson3_send_ipi_single(0, SMP_ASK_C0COUNT);
+	while (!core0_c0count[cpu]) {
+		i++;
+		cpu_relax();
+	}
+
+	if (i > MAX_LOOPS)
+		i = MAX_LOOPS;
+	if (cpu_data[cpu].package)
+		initcount = core0_c0count[cpu] + i;
+	else /* Local access is faster for loops */
+		initcount = core0_c0count[cpu] + i/2;
+
+	write_c0_count(initcount);
+}
+
+static void loongson3_smp_finish(void)
+{
+	int cpu = smp_processor_id();
+
+	write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+	local_irq_enable();
+	ipi_clear_buf(cpu);
+
+	pr_info("CPU#%d finished, CP0_ST=%x\n",
+			smp_processor_id(), read_c0_status());
+}
+
+static void __init loongson3_smp_setup(void)
+{
+	int i = 0, num = 0; /* i: physical id, num: logical id */
+
+	init_cpu_possible(cpu_none_mask);
+
+	/* For unified kernel, NR_CPUS is the maximum possible value,
+	 * loongson_sysconf.nr_cpus is the really present value
+	 */
+	while (i < loongson_sysconf.nr_cpus) {
+		if (loongson_sysconf.reserved_cpus_mask & (1<<i)) {
+			/* Reserved physical CPU cores */
+			__cpu_number_map[i] = -1;
+		} else {
+			__cpu_number_map[i] = num;
+			__cpu_logical_map[num] = i;
+			set_cpu_possible(num, true);
+			/* Loongson processors are always grouped by 4 */
+			cpu_set_cluster(&cpu_data[num], i / 4);
+			num++;
+		}
+		i++;
+	}
+	pr_info("Detected %i available CPU(s)\n", num);
+
+	while (num < loongson_sysconf.nr_cpus) {
+		__cpu_logical_map[num] = -1;
+		num++;
+	}
+
+	csr_ipi_probe();
+	ipi_set0_regs_init();
+	ipi_clear0_regs_init();
+	ipi_status0_regs_init();
+	ipi_en0_regs_init();
+	ipi_mailbox_buf_init();
+	ipi_write_enable(0);
+
+	cpu_set_core(&cpu_data[0],
+		     cpu_logical_map(0) % loongson_sysconf.cores_per_package);
+	cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package;
+}
+
+static void __init loongson3_prepare_cpus(unsigned int max_cpus)
+{
+	if (request_irq(LS_IPI_IRQ, loongson3_ipi_interrupt,
+			IRQF_PERCPU | IRQF_NO_SUSPEND, "SMP_IPI", NULL))
+		pr_err("Failed to request IPI IRQ\n");
+	init_cpu_present(cpu_possible_mask);
+	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it runing!
+ */
+static int loongson3_boot_secondary(int cpu, struct task_struct *idle)
+{
+	pr_info("Booting CPU#%d...\n", cpu);
+
+	ipi_write_buf(cpu, idle);
+
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int loongson3_cpu_disable(void)
+{
+	unsigned long flags;
+	unsigned int cpu = smp_processor_id();
+
+	set_cpu_online(cpu, false);
+	calculate_cpu_foreign_map();
+	local_irq_save(flags);
+	clear_c0_status(ST0_IM);
+	local_irq_restore(flags);
+	local_flush_tlb_all();
+
+	return 0;
+}
+
+
+static void loongson3_cpu_die(unsigned int cpu)
+{
+	while (per_cpu(cpu_state, cpu) != CPU_DEAD)
+		cpu_relax();
+
+	mb();
+}
+
+/* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and
+ * flush all L1 entries at first. Then, another core (usually Core 0) can
+ * safely disable the clock of the target core. loongson3_play_dead() is
+ * called via CKSEG1 (uncached and unmmaped)
+ */
+static void loongson3_type1_play_dead(int *state_addr)
+{
+	register int val;
+	register long cpuid, core, node, count;
+	register void *addr, *base, *initfunc;
+
+	__asm__ __volatile__(
+		"   .set push                     \n"
+		"   .set noreorder                \n"
+		"   li %[addr], 0x80000000        \n" /* KSEG0 */
+		"1: cache 0, 0(%[addr])           \n" /* flush L1 ICache */
+		"   cache 0, 1(%[addr])           \n"
+		"   cache 0, 2(%[addr])           \n"
+		"   cache 0, 3(%[addr])           \n"
+		"   cache 1, 0(%[addr])           \n" /* flush L1 DCache */
+		"   cache 1, 1(%[addr])           \n"
+		"   cache 1, 2(%[addr])           \n"
+		"   cache 1, 3(%[addr])           \n"
+		"   addiu %[sets], %[sets], -1    \n"
+		"   bnez  %[sets], 1b             \n"
+		"   addiu %[addr], %[addr], 0x20  \n"
+		"   li    %[val], 0x7             \n" /* *state_addr = CPU_DEAD; */
+		"   sw    %[val], (%[state_addr]) \n"
+		"   sync                          \n"
+		"   cache 21, (%[state_addr])     \n" /* flush entry of *state_addr */
+		"   .set pop                      \n"
+		: [addr] "=&r" (addr), [val] "=&r" (val)
+		: [state_addr] "r" (state_addr),
+		  [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
+
+	__asm__ __volatile__(
+		"   .set push                         \n"
+		"   .set noreorder                    \n"
+		"   .set mips64                       \n"
+		"   mfc0  %[cpuid], $15, 1            \n"
+		"   andi  %[cpuid], 0x3ff             \n"
+		"   dli   %[base], 0x900000003ff01000 \n"
+		"   andi  %[core], %[cpuid], 0x3      \n"
+		"   sll   %[core], 8                  \n" /* get core id */
+		"   or    %[base], %[base], %[core]   \n"
+		"   andi  %[node], %[cpuid], 0xc      \n"
+		"   dsll  %[node], 42                 \n" /* get node id */
+		"   or    %[base], %[base], %[node]   \n"
+		"1: li    %[count], 0x100             \n" /* wait for init loop */
+		"2: bnez  %[count], 2b                \n" /* limit mailbox access */
+		"   addiu %[count], -1                \n"
+		"   ld    %[initfunc], 0x20(%[base])  \n" /* get PC via mailbox */
+		"   beqz  %[initfunc], 1b             \n"
+		"   nop                               \n"
+		"   ld    $sp, 0x28(%[base])          \n" /* get SP via mailbox */
+		"   ld    $gp, 0x30(%[base])          \n" /* get GP via mailbox */
+		"   ld    $a1, 0x38(%[base])          \n"
+		"   jr    %[initfunc]                 \n" /* jump to initial PC */
+		"   nop                               \n"
+		"   .set pop                          \n"
+		: [core] "=&r" (core), [node] "=&r" (node),
+		  [base] "=&r" (base), [cpuid] "=&r" (cpuid),
+		  [count] "=&r" (count), [initfunc] "=&r" (initfunc)
+		: /* No Input */
+		: "a1");
+}
+
+static void loongson3_type2_play_dead(int *state_addr)
+{
+	register int val;
+	register long cpuid, core, node, count;
+	register void *addr, *base, *initfunc;
+
+	__asm__ __volatile__(
+		"   .set push                     \n"
+		"   .set noreorder                \n"
+		"   li %[addr], 0x80000000        \n" /* KSEG0 */
+		"1: cache 0, 0(%[addr])           \n" /* flush L1 ICache */
+		"   cache 0, 1(%[addr])           \n"
+		"   cache 0, 2(%[addr])           \n"
+		"   cache 0, 3(%[addr])           \n"
+		"   cache 1, 0(%[addr])           \n" /* flush L1 DCache */
+		"   cache 1, 1(%[addr])           \n"
+		"   cache 1, 2(%[addr])           \n"
+		"   cache 1, 3(%[addr])           \n"
+		"   addiu %[sets], %[sets], -1    \n"
+		"   bnez  %[sets], 1b             \n"
+		"   addiu %[addr], %[addr], 0x20  \n"
+		"   li    %[val], 0x7             \n" /* *state_addr = CPU_DEAD; */
+		"   sw    %[val], (%[state_addr]) \n"
+		"   sync                          \n"
+		"   cache 21, (%[state_addr])     \n" /* flush entry of *state_addr */
+		"   .set pop                      \n"
+		: [addr] "=&r" (addr), [val] "=&r" (val)
+		: [state_addr] "r" (state_addr),
+		  [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
+
+	__asm__ __volatile__(
+		"   .set push                         \n"
+		"   .set noreorder                    \n"
+		"   .set mips64                       \n"
+		"   mfc0  %[cpuid], $15, 1            \n"
+		"   andi  %[cpuid], 0x3ff             \n"
+		"   dli   %[base], 0x900000003ff01000 \n"
+		"   andi  %[core], %[cpuid], 0x3      \n"
+		"   sll   %[core], 8                  \n" /* get core id */
+		"   or    %[base], %[base], %[core]   \n"
+		"   andi  %[node], %[cpuid], 0xc      \n"
+		"   dsll  %[node], 42                 \n" /* get node id */
+		"   or    %[base], %[base], %[node]   \n"
+		"   dsrl  %[node], 30                 \n" /* 15:14 */
+		"   or    %[base], %[base], %[node]   \n"
+		"1: li    %[count], 0x100             \n" /* wait for init loop */
+		"2: bnez  %[count], 2b                \n" /* limit mailbox access */
+		"   addiu %[count], -1                \n"
+		"   ld    %[initfunc], 0x20(%[base])  \n" /* get PC via mailbox */
+		"   beqz  %[initfunc], 1b             \n"
+		"   nop                               \n"
+		"   ld    $sp, 0x28(%[base])          \n" /* get SP via mailbox */
+		"   ld    $gp, 0x30(%[base])          \n" /* get GP via mailbox */
+		"   ld    $a1, 0x38(%[base])          \n"
+		"   jr    %[initfunc]                 \n" /* jump to initial PC */
+		"   nop                               \n"
+		"   .set pop                          \n"
+		: [core] "=&r" (core), [node] "=&r" (node),
+		  [base] "=&r" (base), [cpuid] "=&r" (cpuid),
+		  [count] "=&r" (count), [initfunc] "=&r" (initfunc)
+		: /* No Input */
+		: "a1");
+}
+
+static void loongson3_type3_play_dead(int *state_addr)
+{
+	register int val;
+	register long cpuid, core, node, count;
+	register void *addr, *base, *initfunc;
+
+	__asm__ __volatile__(
+		"   .set push                     \n"
+		"   .set noreorder                \n"
+		"   li %[addr], 0x80000000        \n" /* KSEG0 */
+		"1: cache 0, 0(%[addr])           \n" /* flush L1 ICache */
+		"   cache 0, 1(%[addr])           \n"
+		"   cache 0, 2(%[addr])           \n"
+		"   cache 0, 3(%[addr])           \n"
+		"   cache 1, 0(%[addr])           \n" /* flush L1 DCache */
+		"   cache 1, 1(%[addr])           \n"
+		"   cache 1, 2(%[addr])           \n"
+		"   cache 1, 3(%[addr])           \n"
+		"   addiu %[sets], %[sets], -1    \n"
+		"   bnez  %[sets], 1b             \n"
+		"   addiu %[addr], %[addr], 0x40  \n"
+		"   li %[addr], 0x80000000        \n" /* KSEG0 */
+		"2: cache 2, 0(%[addr])           \n" /* flush L1 VCache */
+		"   cache 2, 1(%[addr])           \n"
+		"   cache 2, 2(%[addr])           \n"
+		"   cache 2, 3(%[addr])           \n"
+		"   cache 2, 4(%[addr])           \n"
+		"   cache 2, 5(%[addr])           \n"
+		"   cache 2, 6(%[addr])           \n"
+		"   cache 2, 7(%[addr])           \n"
+		"   cache 2, 8(%[addr])           \n"
+		"   cache 2, 9(%[addr])           \n"
+		"   cache 2, 10(%[addr])          \n"
+		"   cache 2, 11(%[addr])          \n"
+		"   cache 2, 12(%[addr])          \n"
+		"   cache 2, 13(%[addr])          \n"
+		"   cache 2, 14(%[addr])          \n"
+		"   cache 2, 15(%[addr])          \n"
+		"   addiu %[vsets], %[vsets], -1  \n"
+		"   bnez  %[vsets], 2b            \n"
+		"   addiu %[addr], %[addr], 0x40  \n"
+		"   li    %[val], 0x7             \n" /* *state_addr = CPU_DEAD; */
+		"   sw    %[val], (%[state_addr]) \n"
+		"   sync                          \n"
+		"   cache 21, (%[state_addr])     \n" /* flush entry of *state_addr */
+		"   .set pop                      \n"
+		: [addr] "=&r" (addr), [val] "=&r" (val)
+		: [state_addr] "r" (state_addr),
+		  [sets] "r" (cpu_data[smp_processor_id()].dcache.sets),
+		  [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets));
+
+	__asm__ __volatile__(
+		"   .set push                         \n"
+		"   .set noreorder                    \n"
+		"   .set mips64                       \n"
+		"   mfc0  %[cpuid], $15, 1            \n"
+		"   andi  %[cpuid], 0x3ff             \n"
+		"   dli   %[base], 0x900000003ff01000 \n"
+		"   andi  %[core], %[cpuid], 0x3      \n"
+		"   sll   %[core], 8                  \n" /* get core id */
+		"   or    %[base], %[base], %[core]   \n"
+		"   andi  %[node], %[cpuid], 0xc      \n"
+		"   dsll  %[node], 42                 \n" /* get node id */
+		"   or    %[base], %[base], %[node]   \n"
+		"1: li    %[count], 0x100             \n" /* wait for init loop */
+		"2: bnez  %[count], 2b                \n" /* limit mailbox access */
+		"   addiu %[count], -1                \n"
+		"   lw    %[initfunc], 0x20(%[base])  \n" /* check lower 32-bit as jump indicator */
+		"   beqz  %[initfunc], 1b             \n"
+		"   nop                               \n"
+		"   ld    %[initfunc], 0x20(%[base])  \n" /* get PC (whole 64-bit) via mailbox */
+		"   ld    $sp, 0x28(%[base])          \n" /* get SP via mailbox */
+		"   ld    $gp, 0x30(%[base])          \n" /* get GP via mailbox */
+		"   ld    $a1, 0x38(%[base])          \n"
+		"   jr    %[initfunc]                 \n" /* jump to initial PC */
+		"   nop                               \n"
+		"   .set pop                          \n"
+		: [core] "=&r" (core), [node] "=&r" (node),
+		  [base] "=&r" (base), [cpuid] "=&r" (cpuid),
+		  [count] "=&r" (count), [initfunc] "=&r" (initfunc)
+		: /* No Input */
+		: "a1");
+}
+
+void play_dead(void)
+{
+	int prid_imp, prid_rev, *state_addr;
+	unsigned int cpu = smp_processor_id();
+	void (*play_dead_at_ckseg1)(int *);
+
+	idle_task_exit();
+
+	prid_imp = read_c0_prid() & PRID_IMP_MASK;
+	prid_rev = read_c0_prid() & PRID_REV_MASK;
+
+	if (prid_imp == PRID_IMP_LOONGSON_64G) {
+		play_dead_at_ckseg1 =
+			(void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead);
+		goto out;
+	}
+
+	switch (prid_rev) {
+	case PRID_REV_LOONGSON3A_R1:
+	default:
+		play_dead_at_ckseg1 =
+			(void *)CKSEG1ADDR((unsigned long)loongson3_type1_play_dead);
+		break;
+	case PRID_REV_LOONGSON3B_R1:
+	case PRID_REV_LOONGSON3B_R2:
+		play_dead_at_ckseg1 =
+			(void *)CKSEG1ADDR((unsigned long)loongson3_type2_play_dead);
+		break;
+	case PRID_REV_LOONGSON3A_R2_0:
+	case PRID_REV_LOONGSON3A_R2_1:
+	case PRID_REV_LOONGSON3A_R3_0:
+	case PRID_REV_LOONGSON3A_R3_1:
+		play_dead_at_ckseg1 =
+			(void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead);
+		break;
+	}
+
+out:
+	state_addr = &per_cpu(cpu_state, cpu);
+	mb();
+	play_dead_at_ckseg1(state_addr);
+}
+
+static int loongson3_disable_clock(unsigned int cpu)
+{
+	uint64_t core_id = cpu_core(&cpu_data[cpu]);
+	uint64_t package_id = cpu_data[cpu].package;
+
+	if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1) {
+		LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id));
+	} else {
+		if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
+			LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3));
+	}
+	return 0;
+}
+
+static int loongson3_enable_clock(unsigned int cpu)
+{
+	uint64_t core_id = cpu_core(&cpu_data[cpu]);
+	uint64_t package_id = cpu_data[cpu].package;
+
+	if ((read_c0_prid() & PRID_REV_MASK) == PRID_REV_LOONGSON3A_R1) {
+		LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id);
+	} else {
+		if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
+			LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3);
+	}
+	return 0;
+}
+
+static int register_loongson3_notifier(void)
+{
+	return cpuhp_setup_state_nocalls(CPUHP_MIPS_SOC_PREPARE,
+					 "mips/loongson:prepare",
+					 loongson3_enable_clock,
+					 loongson3_disable_clock);
+}
+early_initcall(register_loongson3_notifier);
+
+#endif
+
+const struct plat_smp_ops loongson3_smp_ops = {
+	.send_ipi_single = loongson3_send_ipi_single,
+	.send_ipi_mask = loongson3_send_ipi_mask,
+	.init_secondary = loongson3_init_secondary,
+	.smp_finish = loongson3_smp_finish,
+	.boot_secondary = loongson3_boot_secondary,
+	.smp_setup = loongson3_smp_setup,
+	.prepare_cpus = loongson3_prepare_cpus,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable = loongson3_cpu_disable,
+	.cpu_die = loongson3_cpu_die,
+#endif
+#ifdef CONFIG_KEXEC
+	.kexec_nonboot_cpu = kexec_nonboot_cpu_jump,
+#endif
+};