Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 95 insertions, 0 deletions

diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h
new file mode 100644
index 000000000..a78b0b257
--- /dev/null
+++ b/arch/powerpc/boot/ppcboot.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * This interface is used for compatibility with old U-boots *ONLY*.
+ * Please do not imitate or extend this.
+ */
+
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+#ifndef __PPCBOOT_H__
+#define __PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#include "types.h"
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
+	defined(TARGET_83xx) || defined(TARGET_86xx)
+	unsigned long	bi_immr_base;	/* base of IMMR register */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_mbar_base;   /* base of internal registers */
+#endif
+	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6];	/* Ethernet address */
+	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
+	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
+	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
+#if defined(TARGET_CPM2)
+	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
+	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
+	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
+	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
+	unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
+#endif
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+#if defined(TARGET_4xx)
+	unsigned char	bi_s_version[4];	/* Version of this structure */
+	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
+	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
+	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
+	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
+	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
+#endif
+#if defined(TARGET_HYMOD)
+	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
+	defined(TARGET_85xx) ||	defined(TARGET_83xx) || defined(TARGET_HAS_ETH1)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \
+    defined(TARGET_85xx) || defined(TARGET_HAS_ETH2)
+	/* third onboard ethernet ports */
+	unsigned char	bi_enet2addr[6];
+#define HAVE_ENET2ADDR
+#endif
+#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3)
+	/* fourth onboard ethernet ports */
+	unsigned char	bi_enet3addr[6];
+#define HAVE_ENET3ADDR
+#endif
+#if defined(TARGET_4xx)
+	unsigned int	bi_opbfreq;		/* OB clock in Hz */
+	int		bi_iic_fast[2];		/* Use fast i2c mode */
+#endif
+#if defined(TARGET_440GX)
+	int		bi_phynum[4];		/* phy mapping */
+	int		bi_phymode[4];		/* phy mode */
+#endif
+} bd_t;
+
+#define bi_tbfreq	bi_intfreq
+
+#endif	/* __PPCBOOT_H__ */