Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3250 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
new file mode 100644
index 000000000..5c144c05c
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -0,0 +1,3250 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/crash_dump.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/msi.h>
+#include <linux/iommu.h>
+#include <linux/rculist.h>
+#include <linux/sizes.h>
+#include <linux/debugfs.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/msi_bitmap.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/xics.h>
+#include <asm/firmware.h>
+#include <asm/pnv-pci.h>
+#include <asm/mmzone.h>
+#include <asm/xive.h>
+
+#include <misc/cxl-base.h>
+
+#include "powernv.h"
+#include "pci.h"
+#include "../../../../drivers/pci/pci.h"
+
+#define PNV_IODA1_M64_NUM	16	/* Number of M64 BARs	*/
+#define PNV_IODA1_M64_SEGS	8	/* Segments per M64 BAR	*/
+#define PNV_IODA1_DMA32_SEGSIZE	0x10000000
+
+static const char * const pnv_phb_names[] = { "IODA1", "IODA2", "NPU_OCAPI" };
+
+static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable);
+static void pnv_pci_configure_bus(struct pci_bus *bus);
+
+void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
+			    const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+	char pfix[32];
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	if (pe->flags & PNV_IODA_PE_DEV)
+		strscpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix));
+	else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
+		sprintf(pfix, "%04x:%02x     ",
+			pci_domain_nr(pe->pbus), pe->pbus->number);
+#ifdef CONFIG_PCI_IOV
+	else if (pe->flags & PNV_IODA_PE_VF)
+		sprintf(pfix, "%04x:%02x:%2x.%d",
+			pci_domain_nr(pe->parent_dev->bus),
+			(pe->rid & 0xff00) >> 8,
+			PCI_SLOT(pe->rid), PCI_FUNC(pe->rid));
+#endif /* CONFIG_PCI_IOV*/
+
+	printk("%spci %s: [PE# %.2x] %pV",
+	       level, pfix, pe->pe_number, &vaf);
+
+	va_end(args);
+}
+
+static bool pnv_iommu_bypass_disabled __read_mostly;
+static bool pci_reset_phbs __read_mostly;
+
+static int __init iommu_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+
+	while (*str) {
+		if (!strncmp(str, "nobypass", 8)) {
+			pnv_iommu_bypass_disabled = true;
+			pr_info("PowerNV: IOMMU bypass window disabled.\n");
+			break;
+		}
+		str += strcspn(str, ",");
+		if (*str == ',')
+			str++;
+	}
+
+	return 0;
+}
+early_param("iommu", iommu_setup);
+
+static int __init pci_reset_phbs_setup(char *str)
+{
+	pci_reset_phbs = true;
+	return 0;
+}
+
+early_param("ppc_pci_reset_phbs", pci_reset_phbs_setup);
+
+static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
+{
+	s64 rc;
+
+	phb->ioda.pe_array[pe_no].phb = phb;
+	phb->ioda.pe_array[pe_no].pe_number = pe_no;
+	phb->ioda.pe_array[pe_no].dma_setup_done = false;
+
+	/*
+	 * Clear the PE frozen state as it might be put into frozen state
+	 * in the last PCI remove path. It's not harmful to do so when the
+	 * PE is already in unfrozen state.
+	 */
+	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+				       OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+	if (rc != OPAL_SUCCESS && rc != OPAL_UNSUPPORTED)
+		pr_warn("%s: Error %lld unfreezing PHB#%x-PE#%x\n",
+			__func__, rc, phb->hose->global_number, pe_no);
+
+	return &phb->ioda.pe_array[pe_no];
+}
+
+static void pnv_ioda_reserve_pe(struct pnv_phb *phb, int pe_no)
+{
+	if (!(pe_no >= 0 && pe_no < phb->ioda.total_pe_num)) {
+		pr_warn("%s: Invalid PE %x on PHB#%x\n",
+			__func__, pe_no, phb->hose->global_number);
+		return;
+	}
+
+	mutex_lock(&phb->ioda.pe_alloc_mutex);
+	if (test_and_set_bit(pe_no, phb->ioda.pe_alloc))
+		pr_debug("%s: PE %x was reserved on PHB#%x\n",
+			 __func__, pe_no, phb->hose->global_number);
+	mutex_unlock(&phb->ioda.pe_alloc_mutex);
+
+	pnv_ioda_init_pe(phb, pe_no);
+}
+
+struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb, int count)
+{
+	struct pnv_ioda_pe *ret = NULL;
+	int run = 0, pe, i;
+
+	mutex_lock(&phb->ioda.pe_alloc_mutex);
+
+	/* scan backwards for a run of @count cleared bits */
+	for (pe = phb->ioda.total_pe_num - 1; pe >= 0; pe--) {
+		if (test_bit(pe, phb->ioda.pe_alloc)) {
+			run = 0;
+			continue;
+		}
+
+		run++;
+		if (run == count)
+			break;
+	}
+	if (run != count)
+		goto out;
+
+	for (i = pe; i < pe + count; i++) {
+		set_bit(i, phb->ioda.pe_alloc);
+		pnv_ioda_init_pe(phb, i);
+	}
+	ret = &phb->ioda.pe_array[pe];
+
+out:
+	mutex_unlock(&phb->ioda.pe_alloc_mutex);
+	return ret;
+}
+
+void pnv_ioda_free_pe(struct pnv_ioda_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb;
+	unsigned int pe_num = pe->pe_number;
+
+	WARN_ON(pe->pdev);
+	memset(pe, 0, sizeof(struct pnv_ioda_pe));
+
+	mutex_lock(&phb->ioda.pe_alloc_mutex);
+	clear_bit(pe_num, phb->ioda.pe_alloc);
+	mutex_unlock(&phb->ioda.pe_alloc_mutex);
+}
+
+/* The default M64 BAR is shared by all PEs */
+static int pnv_ioda2_init_m64(struct pnv_phb *phb)
+{
+	const char *desc;
+	struct resource *r;
+	s64 rc;
+
+	/* Configure the default M64 BAR */
+	rc = opal_pci_set_phb_mem_window(phb->opal_id,
+					 OPAL_M64_WINDOW_TYPE,
+					 phb->ioda.m64_bar_idx,
+					 phb->ioda.m64_base,
+					 0, /* unused */
+					 phb->ioda.m64_size);
+	if (rc != OPAL_SUCCESS) {
+		desc = "configuring";
+		goto fail;
+	}
+
+	/* Enable the default M64 BAR */
+	rc = opal_pci_phb_mmio_enable(phb->opal_id,
+				      OPAL_M64_WINDOW_TYPE,
+				      phb->ioda.m64_bar_idx,
+				      OPAL_ENABLE_M64_SPLIT);
+	if (rc != OPAL_SUCCESS) {
+		desc = "enabling";
+		goto fail;
+	}
+
+	/*
+	 * Exclude the segments for reserved and root bus PE, which
+	 * are first or last two PEs.
+	 */
+	r = &phb->hose->mem_resources[1];
+	if (phb->ioda.reserved_pe_idx == 0)
+		r->start += (2 * phb->ioda.m64_segsize);
+	else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
+		r->end -= (2 * phb->ioda.m64_segsize);
+	else
+		pr_warn("  Cannot strip M64 segment for reserved PE#%x\n",
+			phb->ioda.reserved_pe_idx);
+
+	return 0;
+
+fail:
+	pr_warn("  Failure %lld %s M64 BAR#%d\n",
+		rc, desc, phb->ioda.m64_bar_idx);
+	opal_pci_phb_mmio_enable(phb->opal_id,
+				 OPAL_M64_WINDOW_TYPE,
+				 phb->ioda.m64_bar_idx,
+				 OPAL_DISABLE_M64);
+	return -EIO;
+}
+
+static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev,
+					 unsigned long *pe_bitmap)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus);
+	struct resource *r;
+	resource_size_t base, sgsz, start, end;
+	int segno, i;
+
+	base = phb->ioda.m64_base;
+	sgsz = phb->ioda.m64_segsize;
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		r = &pdev->resource[i];
+		if (!r->parent || !pnv_pci_is_m64(phb, r))
+			continue;
+
+		start = ALIGN_DOWN(r->start - base, sgsz);
+		end = ALIGN(r->end - base, sgsz);
+		for (segno = start / sgsz; segno < end / sgsz; segno++) {
+			if (pe_bitmap)
+				set_bit(segno, pe_bitmap);
+			else
+				pnv_ioda_reserve_pe(phb, segno);
+		}
+	}
+}
+
+static int pnv_ioda1_init_m64(struct pnv_phb *phb)
+{
+	struct resource *r;
+	int index;
+
+	/*
+	 * There are 16 M64 BARs, each of which has 8 segments. So
+	 * there are as many M64 segments as the maximum number of
+	 * PEs, which is 128.
+	 */
+	for (index = 0; index < PNV_IODA1_M64_NUM; index++) {
+		unsigned long base, segsz = phb->ioda.m64_segsize;
+		int64_t rc;
+
+		base = phb->ioda.m64_base +
+		       index * PNV_IODA1_M64_SEGS * segsz;
+		rc = opal_pci_set_phb_mem_window(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, index, base, 0,
+				PNV_IODA1_M64_SEGS * segsz);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("  Error %lld setting M64 PHB#%x-BAR#%d\n",
+				rc, phb->hose->global_number, index);
+			goto fail;
+		}
+
+		rc = opal_pci_phb_mmio_enable(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, index,
+				OPAL_ENABLE_M64_SPLIT);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("  Error %lld enabling M64 PHB#%x-BAR#%d\n",
+				rc, phb->hose->global_number, index);
+			goto fail;
+		}
+	}
+
+	for (index = 0; index < phb->ioda.total_pe_num; index++) {
+		int64_t rc;
+
+		/*
+		 * P7IOC supports M64DT, which helps mapping M64 segment
+		 * to one particular PE#. However, PHB3 has fixed mapping
+		 * between M64 segment and PE#. In order to have same logic
+		 * for P7IOC and PHB3, we enforce fixed mapping between M64
+		 * segment and PE# on P7IOC.
+		 */
+		rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+				index, OPAL_M64_WINDOW_TYPE,
+				index / PNV_IODA1_M64_SEGS,
+				index % PNV_IODA1_M64_SEGS);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Error %lld mapping M64 for PHB#%x-PE#%x\n",
+				__func__, rc, phb->hose->global_number,
+				index);
+			goto fail;
+		}
+	}
+
+	/*
+	 * Exclude the segments for reserved and root bus PE, which
+	 * are first or last two PEs.
+	 */
+	r = &phb->hose->mem_resources[1];
+	if (phb->ioda.reserved_pe_idx == 0)
+		r->start += (2 * phb->ioda.m64_segsize);
+	else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
+		r->end -= (2 * phb->ioda.m64_segsize);
+	else
+		WARN(1, "Wrong reserved PE#%x on PHB#%x\n",
+		     phb->ioda.reserved_pe_idx, phb->hose->global_number);
+
+	return 0;
+
+fail:
+	for ( ; index >= 0; index--)
+		opal_pci_phb_mmio_enable(phb->opal_id,
+			OPAL_M64_WINDOW_TYPE, index, OPAL_DISABLE_M64);
+
+	return -EIO;
+}
+
+static void pnv_ioda_reserve_m64_pe(struct pci_bus *bus,
+				    unsigned long *pe_bitmap,
+				    bool all)
+{
+	struct pci_dev *pdev;
+
+	list_for_each_entry(pdev, &bus->devices, bus_list) {
+		pnv_ioda_reserve_dev_m64_pe(pdev, pe_bitmap);
+
+		if (all && pdev->subordinate)
+			pnv_ioda_reserve_m64_pe(pdev->subordinate,
+						pe_bitmap, all);
+	}
+}
+
+static struct pnv_ioda_pe *pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(bus);
+	struct pnv_ioda_pe *master_pe, *pe;
+	unsigned long size, *pe_alloc;
+	int i;
+
+	/* Root bus shouldn't use M64 */
+	if (pci_is_root_bus(bus))
+		return NULL;
+
+	/* Allocate bitmap */
+	size = ALIGN(phb->ioda.total_pe_num / 8, sizeof(unsigned long));
+	pe_alloc = kzalloc(size, GFP_KERNEL);
+	if (!pe_alloc) {
+		pr_warn("%s: Out of memory !\n",
+			__func__);
+		return NULL;
+	}
+
+	/* Figure out reserved PE numbers by the PE */
+	pnv_ioda_reserve_m64_pe(bus, pe_alloc, all);
+
+	/*
+	 * the current bus might not own M64 window and that's all
+	 * contributed by its child buses. For the case, we needn't
+	 * pick M64 dependent PE#.
+	 */
+	if (bitmap_empty(pe_alloc, phb->ioda.total_pe_num)) {
+		kfree(pe_alloc);
+		return NULL;
+	}
+
+	/*
+	 * Figure out the master PE and put all slave PEs to master
+	 * PE's list to form compound PE.
+	 */
+	master_pe = NULL;
+	i = -1;
+	while ((i = find_next_bit(pe_alloc, phb->ioda.total_pe_num, i + 1)) <
+		phb->ioda.total_pe_num) {
+		pe = &phb->ioda.pe_array[i];
+
+		phb->ioda.m64_segmap[pe->pe_number] = pe->pe_number;
+		if (!master_pe) {
+			pe->flags |= PNV_IODA_PE_MASTER;
+			INIT_LIST_HEAD(&pe->slaves);
+			master_pe = pe;
+		} else {
+			pe->flags |= PNV_IODA_PE_SLAVE;
+			pe->master = master_pe;
+			list_add_tail(&pe->list, &master_pe->slaves);
+		}
+	}
+
+	kfree(pe_alloc);
+	return master_pe;
+}
+
+static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
+{
+	struct pci_controller *hose = phb->hose;
+	struct device_node *dn = hose->dn;
+	struct resource *res;
+	u32 m64_range[2], i;
+	const __be32 *r;
+	u64 pci_addr;
+
+	if (phb->type != PNV_PHB_IODA1 && phb->type != PNV_PHB_IODA2) {
+		pr_info("  Not support M64 window\n");
+		return;
+	}
+
+	if (!firmware_has_feature(FW_FEATURE_OPAL)) {
+		pr_info("  Firmware too old to support M64 window\n");
+		return;
+	}
+
+	r = of_get_property(dn, "ibm,opal-m64-window", NULL);
+	if (!r) {
+		pr_info("  No <ibm,opal-m64-window> on %pOF\n",
+			dn);
+		return;
+	}
+
+	/*
+	 * Find the available M64 BAR range and pickup the last one for
+	 * covering the whole 64-bits space. We support only one range.
+	 */
+	if (of_property_read_u32_array(dn, "ibm,opal-available-m64-ranges",
+				       m64_range, 2)) {
+		/* In absence of the property, assume 0..15 */
+		m64_range[0] = 0;
+		m64_range[1] = 16;
+	}
+	/* We only support 64 bits in our allocator */
+	if (m64_range[1] > 63) {
+		pr_warn("%s: Limiting M64 range to 63 (from %d) on PHB#%x\n",
+			__func__, m64_range[1], phb->hose->global_number);
+		m64_range[1] = 63;
+	}
+	/* Empty range, no m64 */
+	if (m64_range[1] <= m64_range[0]) {
+		pr_warn("%s: M64 empty, disabling M64 usage on PHB#%x\n",
+			__func__, phb->hose->global_number);
+		return;
+	}
+
+	/* Configure M64 informations */
+	res = &hose->mem_resources[1];
+	res->name = dn->full_name;
+	res->start = of_translate_address(dn, r + 2);
+	res->end = res->start + of_read_number(r + 4, 2) - 1;
+	res->flags = (IORESOURCE_MEM | IORESOURCE_MEM_64 | IORESOURCE_PREFETCH);
+	pci_addr = of_read_number(r, 2);
+	hose->mem_offset[1] = res->start - pci_addr;
+
+	phb->ioda.m64_size = resource_size(res);
+	phb->ioda.m64_segsize = phb->ioda.m64_size / phb->ioda.total_pe_num;
+	phb->ioda.m64_base = pci_addr;
+
+	/* This lines up nicely with the display from processing OF ranges */
+	pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx (M64 #%d..%d)\n",
+		res->start, res->end, pci_addr, m64_range[0],
+		m64_range[0] + m64_range[1] - 1);
+
+	/* Mark all M64 used up by default */
+	phb->ioda.m64_bar_alloc = (unsigned long)-1;
+
+	/* Use last M64 BAR to cover M64 window */
+	m64_range[1]--;
+	phb->ioda.m64_bar_idx = m64_range[0] + m64_range[1];
+
+	pr_info(" Using M64 #%d as default window\n", phb->ioda.m64_bar_idx);
+
+	/* Mark remaining ones free */
+	for (i = m64_range[0]; i < m64_range[1]; i++)
+		clear_bit(i, &phb->ioda.m64_bar_alloc);
+
+	/*
+	 * Setup init functions for M64 based on IODA version, IODA3 uses
+	 * the IODA2 code.
+	 */
+	if (phb->type == PNV_PHB_IODA1)
+		phb->init_m64 = pnv_ioda1_init_m64;
+	else
+		phb->init_m64 = pnv_ioda2_init_m64;
+}
+
+static void pnv_ioda_freeze_pe(struct pnv_phb *phb, int pe_no)
+{
+	struct pnv_ioda_pe *pe = &phb->ioda.pe_array[pe_no];
+	struct pnv_ioda_pe *slave;
+	s64 rc;
+
+	/* Fetch master PE */
+	if (pe->flags & PNV_IODA_PE_SLAVE) {
+		pe = pe->master;
+		if (WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER)))
+			return;
+
+		pe_no = pe->pe_number;
+	}
+
+	/* Freeze master PE */
+	rc = opal_pci_eeh_freeze_set(phb->opal_id,
+				     pe_no,
+				     OPAL_EEH_ACTION_SET_FREEZE_ALL);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",
+			__func__, rc, phb->hose->global_number, pe_no);
+		return;
+	}
+
+	/* Freeze slave PEs */
+	if (!(pe->flags & PNV_IODA_PE_MASTER))
+		return;
+
+	list_for_each_entry(slave, &pe->slaves, list) {
+		rc = opal_pci_eeh_freeze_set(phb->opal_id,
+					     slave->pe_number,
+					     OPAL_EEH_ACTION_SET_FREEZE_ALL);
+		if (rc != OPAL_SUCCESS)
+			pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",
+				__func__, rc, phb->hose->global_number,
+				slave->pe_number);
+	}
+}
+
+static int pnv_ioda_unfreeze_pe(struct pnv_phb *phb, int pe_no, int opt)
+{
+	struct pnv_ioda_pe *pe, *slave;
+	s64 rc;
+
+	/* Find master PE */
+	pe = &phb->ioda.pe_array[pe_no];
+	if (pe->flags & PNV_IODA_PE_SLAVE) {
+		pe = pe->master;
+		WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER));
+		pe_no = pe->pe_number;
+	}
+
+	/* Clear frozen state for master PE */
+	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no, opt);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n",
+			__func__, rc, opt, phb->hose->global_number, pe_no);
+		return -EIO;
+	}
+
+	if (!(pe->flags & PNV_IODA_PE_MASTER))
+		return 0;
+
+	/* Clear frozen state for slave PEs */
+	list_for_each_entry(slave, &pe->slaves, list) {
+		rc = opal_pci_eeh_freeze_clear(phb->opal_id,
+					     slave->pe_number,
+					     opt);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n",
+				__func__, rc, opt, phb->hose->global_number,
+				slave->pe_number);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int pnv_ioda_get_pe_state(struct pnv_phb *phb, int pe_no)
+{
+	struct pnv_ioda_pe *slave, *pe;
+	u8 fstate = 0, state;
+	__be16 pcierr = 0;
+	s64 rc;
+
+	/* Sanity check on PE number */
+	if (pe_no < 0 || pe_no >= phb->ioda.total_pe_num)
+		return OPAL_EEH_STOPPED_PERM_UNAVAIL;
+
+	/*
+	 * Fetch the master PE and the PE instance might be
+	 * not initialized yet.
+	 */
+	pe = &phb->ioda.pe_array[pe_no];
+	if (pe->flags & PNV_IODA_PE_SLAVE) {
+		pe = pe->master;
+		WARN_ON(!pe || !(pe->flags & PNV_IODA_PE_MASTER));
+		pe_no = pe->pe_number;
+	}
+
+	/* Check the master PE */
+	rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
+					&state, &pcierr, NULL);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld getting "
+			"PHB#%x-PE#%x state\n",
+			__func__, rc,
+			phb->hose->global_number, pe_no);
+		return OPAL_EEH_STOPPED_TEMP_UNAVAIL;
+	}
+
+	/* Check the slave PE */
+	if (!(pe->flags & PNV_IODA_PE_MASTER))
+		return state;
+
+	list_for_each_entry(slave, &pe->slaves, list) {
+		rc = opal_pci_eeh_freeze_status(phb->opal_id,
+						slave->pe_number,
+						&fstate,
+						&pcierr,
+						NULL);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Failure %lld getting "
+				"PHB#%x-PE#%x state\n",
+				__func__, rc,
+				phb->hose->global_number, slave->pe_number);
+			return OPAL_EEH_STOPPED_TEMP_UNAVAIL;
+		}
+
+		/*
+		 * Override the result based on the ascending
+		 * priority.
+		 */
+		if (fstate > state)
+			state = fstate;
+	}
+
+	return state;
+}
+
+struct pnv_ioda_pe *pnv_pci_bdfn_to_pe(struct pnv_phb *phb, u16 bdfn)
+{
+	int pe_number = phb->ioda.pe_rmap[bdfn];
+
+	if (pe_number == IODA_INVALID_PE)
+		return NULL;
+
+	return &phb->ioda.pe_array[pe_number];
+}
+
+struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(dev->bus);
+	struct pci_dn *pdn = pci_get_pdn(dev);
+
+	if (!pdn)
+		return NULL;
+	if (pdn->pe_number == IODA_INVALID_PE)
+		return NULL;
+	return &phb->ioda.pe_array[pdn->pe_number];
+}
+
+static int pnv_ioda_set_one_peltv(struct pnv_phb *phb,
+				  struct pnv_ioda_pe *parent,
+				  struct pnv_ioda_pe *child,
+				  bool is_add)
+{
+	const char *desc = is_add ? "adding" : "removing";
+	uint8_t op = is_add ? OPAL_ADD_PE_TO_DOMAIN :
+			      OPAL_REMOVE_PE_FROM_DOMAIN;
+	struct pnv_ioda_pe *slave;
+	long rc;
+
+	/* Parent PE affects child PE */
+	rc = opal_pci_set_peltv(phb->opal_id, parent->pe_number,
+				child->pe_number, op);
+	if (rc != OPAL_SUCCESS) {
+		pe_warn(child, "OPAL error %ld %s to parent PELTV\n",
+			rc, desc);
+		return -ENXIO;
+	}
+
+	if (!(child->flags & PNV_IODA_PE_MASTER))
+		return 0;
+
+	/* Compound case: parent PE affects slave PEs */
+	list_for_each_entry(slave, &child->slaves, list) {
+		rc = opal_pci_set_peltv(phb->opal_id, parent->pe_number,
+					slave->pe_number, op);
+		if (rc != OPAL_SUCCESS) {
+			pe_warn(slave, "OPAL error %ld %s to parent PELTV\n",
+				rc, desc);
+			return -ENXIO;
+		}
+	}
+
+	return 0;
+}
+
+static int pnv_ioda_set_peltv(struct pnv_phb *phb,
+			      struct pnv_ioda_pe *pe,
+			      bool is_add)
+{
+	struct pnv_ioda_pe *slave;
+	struct pci_dev *pdev = NULL;
+	int ret;
+
+	/*
+	 * Clear PE frozen state. If it's master PE, we need
+	 * clear slave PE frozen state as well.
+	 */
+	if (is_add) {
+		opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
+					  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+		if (pe->flags & PNV_IODA_PE_MASTER) {
+			list_for_each_entry(slave, &pe->slaves, list)
+				opal_pci_eeh_freeze_clear(phb->opal_id,
+							  slave->pe_number,
+							  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+		}
+	}
+
+	/*
+	 * Associate PE in PELT. We need add the PE into the
+	 * corresponding PELT-V as well. Otherwise, the error
+	 * originated from the PE might contribute to other
+	 * PEs.
+	 */
+	ret = pnv_ioda_set_one_peltv(phb, pe, pe, is_add);
+	if (ret)
+		return ret;
+
+	/* For compound PEs, any one affects all of them */
+	if (pe->flags & PNV_IODA_PE_MASTER) {
+		list_for_each_entry(slave, &pe->slaves, list) {
+			ret = pnv_ioda_set_one_peltv(phb, slave, pe, is_add);
+			if (ret)
+				return ret;
+		}
+	}
+
+	if (pe->flags & (PNV_IODA_PE_BUS_ALL | PNV_IODA_PE_BUS))
+		pdev = pe->pbus->self;
+	else if (pe->flags & PNV_IODA_PE_DEV)
+		pdev = pe->pdev->bus->self;
+#ifdef CONFIG_PCI_IOV
+	else if (pe->flags & PNV_IODA_PE_VF)
+		pdev = pe->parent_dev;
+#endif /* CONFIG_PCI_IOV */
+	while (pdev) {
+		struct pci_dn *pdn = pci_get_pdn(pdev);
+		struct pnv_ioda_pe *parent;
+
+		if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+			parent = &phb->ioda.pe_array[pdn->pe_number];
+			ret = pnv_ioda_set_one_peltv(phb, parent, pe, is_add);
+			if (ret)
+				return ret;
+		}
+
+		pdev = pdev->bus->self;
+	}
+
+	return 0;
+}
+
+static void pnv_ioda_unset_peltv(struct pnv_phb *phb,
+				 struct pnv_ioda_pe *pe,
+				 struct pci_dev *parent)
+{
+	int64_t rc;
+
+	while (parent) {
+		struct pci_dn *pdn = pci_get_pdn(parent);
+
+		if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+			rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+						pe->pe_number,
+						OPAL_REMOVE_PE_FROM_DOMAIN);
+			/* XXX What to do in case of error ? */
+		}
+		parent = parent->bus->self;
+	}
+
+	opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
+				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+	/* Disassociate PE in PELT */
+	rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
+				pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+	if (rc)
+		pe_warn(pe, "OPAL error %lld remove self from PELTV\n", rc);
+}
+
+int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
+{
+	struct pci_dev *parent;
+	uint8_t bcomp, dcomp, fcomp;
+	int64_t rc;
+	long rid_end, rid;
+
+	/* Currently, we just deconfigure VF PE. Bus PE will always there.*/
+	if (pe->pbus) {
+		int count;
+
+		dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
+		parent = pe->pbus->self;
+		if (pe->flags & PNV_IODA_PE_BUS_ALL)
+			count = resource_size(&pe->pbus->busn_res);
+		else
+			count = 1;
+
+		switch(count) {
+		case  1: bcomp = OpalPciBusAll;         break;
+		case  2: bcomp = OpalPciBus7Bits;       break;
+		case  4: bcomp = OpalPciBus6Bits;       break;
+		case  8: bcomp = OpalPciBus5Bits;       break;
+		case 16: bcomp = OpalPciBus4Bits;       break;
+		case 32: bcomp = OpalPciBus3Bits;       break;
+		default:
+			dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n",
+			        count);
+			/* Do an exact match only */
+			bcomp = OpalPciBusAll;
+		}
+		rid_end = pe->rid + (count << 8);
+	} else {
+#ifdef CONFIG_PCI_IOV
+		if (pe->flags & PNV_IODA_PE_VF)
+			parent = pe->parent_dev;
+		else
+#endif
+			parent = pe->pdev->bus->self;
+		bcomp = OpalPciBusAll;
+		dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
+		rid_end = pe->rid + 1;
+	}
+
+	/* Clear the reverse map */
+	for (rid = pe->rid; rid < rid_end; rid++)
+		phb->ioda.pe_rmap[rid] = IODA_INVALID_PE;
+
+	/*
+	 * Release from all parents PELT-V. NPUs don't have a PELTV
+	 * table
+	 */
+	if (phb->type != PNV_PHB_NPU_OCAPI)
+		pnv_ioda_unset_peltv(phb, pe, parent);
+
+	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
+			     bcomp, dcomp, fcomp, OPAL_UNMAP_PE);
+	if (rc)
+		pe_err(pe, "OPAL error %lld trying to setup PELT table\n", rc);
+
+	pe->pbus = NULL;
+	pe->pdev = NULL;
+#ifdef CONFIG_PCI_IOV
+	pe->parent_dev = NULL;
+#endif
+
+	return 0;
+}
+
+int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
+{
+	uint8_t bcomp, dcomp, fcomp;
+	long rc, rid_end, rid;
+
+	/* Bus validation ? */
+	if (pe->pbus) {
+		int count;
+
+		dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
+		if (pe->flags & PNV_IODA_PE_BUS_ALL)
+			count = resource_size(&pe->pbus->busn_res);
+		else
+			count = 1;
+
+		switch(count) {
+		case  1: bcomp = OpalPciBusAll;		break;
+		case  2: bcomp = OpalPciBus7Bits;	break;
+		case  4: bcomp = OpalPciBus6Bits;	break;
+		case  8: bcomp = OpalPciBus5Bits;	break;
+		case 16: bcomp = OpalPciBus4Bits;	break;
+		case 32: bcomp = OpalPciBus3Bits;	break;
+		default:
+			dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n",
+			        count);
+			/* Do an exact match only */
+			bcomp = OpalPciBusAll;
+		}
+		rid_end = pe->rid + (count << 8);
+	} else {
+		bcomp = OpalPciBusAll;
+		dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
+		rid_end = pe->rid + 1;
+	}
+
+	/*
+	 * Associate PE in PELT. We need add the PE into the
+	 * corresponding PELT-V as well. Otherwise, the error
+	 * originated from the PE might contribute to other
+	 * PEs.
+	 */
+	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
+			     bcomp, dcomp, fcomp, OPAL_MAP_PE);
+	if (rc) {
+		pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
+		return -ENXIO;
+	}
+
+	/*
+	 * Configure PELTV. NPUs don't have a PELTV table so skip
+	 * configuration on them.
+	 */
+	if (phb->type != PNV_PHB_NPU_OCAPI)
+		pnv_ioda_set_peltv(phb, pe, true);
+
+	/* Setup reverse map */
+	for (rid = pe->rid; rid < rid_end; rid++)
+		phb->ioda.pe_rmap[rid] = pe->pe_number;
+
+	/* Setup one MVTs on IODA1 */
+	if (phb->type != PNV_PHB_IODA1) {
+		pe->mve_number = 0;
+		goto out;
+	}
+
+	pe->mve_number = pe->pe_number;
+	rc = opal_pci_set_mve(phb->opal_id, pe->mve_number, pe->pe_number);
+	if (rc != OPAL_SUCCESS) {
+		pe_err(pe, "OPAL error %ld setting up MVE %x\n",
+		       rc, pe->mve_number);
+		pe->mve_number = -1;
+	} else {
+		rc = opal_pci_set_mve_enable(phb->opal_id,
+					     pe->mve_number, OPAL_ENABLE_MVE);
+		if (rc) {
+			pe_err(pe, "OPAL error %ld enabling MVE %x\n",
+			       rc, pe->mve_number);
+			pe->mve_number = -1;
+		}
+	}
+
+out:
+	return 0;
+}
+
+static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(dev->bus);
+	struct pci_dn *pdn = pci_get_pdn(dev);
+	struct pnv_ioda_pe *pe;
+
+	if (!pdn) {
+		pr_err("%s: Device tree node not associated properly\n",
+			   pci_name(dev));
+		return NULL;
+	}
+	if (pdn->pe_number != IODA_INVALID_PE)
+		return NULL;
+
+	pe = pnv_ioda_alloc_pe(phb, 1);
+	if (!pe) {
+		pr_warn("%s: Not enough PE# available, disabling device\n",
+			pci_name(dev));
+		return NULL;
+	}
+
+	/* NOTE: We don't get a reference for the pointer in the PE
+	 * data structure, both the device and PE structures should be
+	 * destroyed at the same time.
+	 *
+	 * At some point we want to remove the PDN completely anyways
+	 */
+	pdn->pe_number = pe->pe_number;
+	pe->flags = PNV_IODA_PE_DEV;
+	pe->pdev = dev;
+	pe->pbus = NULL;
+	pe->mve_number = -1;
+	pe->rid = dev->bus->number << 8 | pdn->devfn;
+	pe->device_count++;
+
+	pe_info(pe, "Associated device to PE\n");
+
+	if (pnv_ioda_configure_pe(phb, pe)) {
+		/* XXX What do we do here ? */
+		pnv_ioda_free_pe(pe);
+		pdn->pe_number = IODA_INVALID_PE;
+		pe->pdev = NULL;
+		return NULL;
+	}
+
+	/* Put PE to the list */
+	mutex_lock(&phb->ioda.pe_list_mutex);
+	list_add_tail(&pe->list, &phb->ioda.pe_list);
+	mutex_unlock(&phb->ioda.pe_list_mutex);
+	return pe;
+}
+
+/*
+ * There're 2 types of PCI bus sensitive PEs: One that is compromised of
+ * single PCI bus. Another one that contains the primary PCI bus and its
+ * subordinate PCI devices and buses. The second type of PE is normally
+ * orgiriated by PCIe-to-PCI bridge or PLX switch downstream ports.
+ */
+static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(bus);
+	struct pnv_ioda_pe *pe = NULL;
+	unsigned int pe_num;
+
+	/*
+	 * In partial hotplug case, the PE instance might be still alive.
+	 * We should reuse it instead of allocating a new one.
+	 */
+	pe_num = phb->ioda.pe_rmap[bus->number << 8];
+	if (WARN_ON(pe_num != IODA_INVALID_PE)) {
+		pe = &phb->ioda.pe_array[pe_num];
+		return NULL;
+	}
+
+	/* PE number for root bus should have been reserved */
+	if (pci_is_root_bus(bus))
+		pe = &phb->ioda.pe_array[phb->ioda.root_pe_idx];
+
+	/* Check if PE is determined by M64 */
+	if (!pe)
+		pe = pnv_ioda_pick_m64_pe(bus, all);
+
+	/* The PE number isn't pinned by M64 */
+	if (!pe)
+		pe = pnv_ioda_alloc_pe(phb, 1);
+
+	if (!pe) {
+		pr_warn("%s: Not enough PE# available for PCI bus %04x:%02x\n",
+			__func__, pci_domain_nr(bus), bus->number);
+		return NULL;
+	}
+
+	pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS);
+	pe->pbus = bus;
+	pe->pdev = NULL;
+	pe->mve_number = -1;
+	pe->rid = bus->busn_res.start << 8;
+
+	if (all)
+		pe_info(pe, "Secondary bus %pad..%pad associated with PE#%x\n",
+			&bus->busn_res.start, &bus->busn_res.end,
+			pe->pe_number);
+	else
+		pe_info(pe, "Secondary bus %pad associated with PE#%x\n",
+			&bus->busn_res.start, pe->pe_number);
+
+	if (pnv_ioda_configure_pe(phb, pe)) {
+		/* XXX What do we do here ? */
+		pnv_ioda_free_pe(pe);
+		pe->pbus = NULL;
+		return NULL;
+	}
+
+	/* Put PE to the list */
+	list_add_tail(&pe->list, &phb->ioda.pe_list);
+
+	return pe;
+}
+
+static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
+				       struct pnv_ioda_pe *pe);
+
+static void pnv_pci_ioda_dma_dev_setup(struct pci_dev *pdev)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus);
+	struct pci_dn *pdn = pci_get_pdn(pdev);
+	struct pnv_ioda_pe *pe;
+
+	/* Check if the BDFN for this device is associated with a PE yet */
+	pe = pnv_pci_bdfn_to_pe(phb, pdev->devfn | (pdev->bus->number << 8));
+	if (!pe) {
+		/* VF PEs should be pre-configured in pnv_pci_sriov_enable() */
+		if (WARN_ON(pdev->is_virtfn))
+			return;
+
+		pnv_pci_configure_bus(pdev->bus);
+		pe = pnv_pci_bdfn_to_pe(phb, pdev->devfn | (pdev->bus->number << 8));
+		pci_info(pdev, "Configured PE#%x\n", pe ? pe->pe_number : 0xfffff);
+
+
+		/*
+		 * If we can't setup the IODA PE something has gone horribly
+		 * wrong and we can't enable DMA for the device.
+		 */
+		if (WARN_ON(!pe))
+			return;
+	} else {
+		pci_info(pdev, "Added to existing PE#%x\n", pe->pe_number);
+	}
+
+	/*
+	 * We assume that bridges *probably* don't need to do any DMA so we can
+	 * skip allocating a TCE table, etc unless we get a non-bridge device.
+	 */
+	if (!pe->dma_setup_done && !pci_is_bridge(pdev)) {
+		switch (phb->type) {
+		case PNV_PHB_IODA1:
+			pnv_pci_ioda1_setup_dma_pe(phb, pe);
+			break;
+		case PNV_PHB_IODA2:
+			pnv_pci_ioda2_setup_dma_pe(phb, pe);
+			break;
+		default:
+			pr_warn("%s: No DMA for PHB#%x (type %d)\n",
+				__func__, phb->hose->global_number, phb->type);
+		}
+	}
+
+	if (pdn)
+		pdn->pe_number = pe->pe_number;
+	pe->device_count++;
+
+	WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
+	pdev->dev.archdata.dma_offset = pe->tce_bypass_base;
+	set_iommu_table_base(&pdev->dev, pe->table_group.tables[0]);
+
+	/* PEs with a DMA weight of zero won't have a group */
+	if (pe->table_group.group)
+		iommu_add_device(&pe->table_group, &pdev->dev);
+}
+
+/*
+ * Reconfigure TVE#0 to be usable as 64-bit DMA space.
+ *
+ * The first 4GB of virtual memory for a PE is reserved for 32-bit accesses.
+ * Devices can only access more than that if bit 59 of the PCI address is set
+ * by hardware, which indicates TVE#1 should be used instead of TVE#0.
+ * Many PCI devices are not capable of addressing that many bits, and as a
+ * result are limited to the 4GB of virtual memory made available to 32-bit
+ * devices in TVE#0.
+ *
+ * In order to work around this, reconfigure TVE#0 to be suitable for 64-bit
+ * devices by configuring the virtual memory past the first 4GB inaccessible
+ * by 64-bit DMAs.  This should only be used by devices that want more than
+ * 4GB, and only on PEs that have no 32-bit devices.
+ *
+ * Currently this will only work on PHB3 (POWER8).
+ */
+static int pnv_pci_ioda_dma_64bit_bypass(struct pnv_ioda_pe *pe)
+{
+	u64 window_size, table_size, tce_count, addr;
+	struct page *table_pages;
+	u64 tce_order = 28; /* 256MB TCEs */
+	__be64 *tces;
+	s64 rc;
+
+	/*
+	 * Window size needs to be a power of two, but needs to account for
+	 * shifting memory by the 4GB offset required to skip 32bit space.
+	 */
+	window_size = roundup_pow_of_two(memory_hotplug_max() + (1ULL << 32));
+	tce_count = window_size >> tce_order;
+	table_size = tce_count << 3;
+
+	if (table_size < PAGE_SIZE)
+		table_size = PAGE_SIZE;
+
+	table_pages = alloc_pages_node(pe->phb->hose->node, GFP_KERNEL,
+				       get_order(table_size));
+	if (!table_pages)
+		goto err;
+
+	tces = page_address(table_pages);
+	if (!tces)
+		goto err;
+
+	memset(tces, 0, table_size);
+
+	for (addr = 0; addr < memory_hotplug_max(); addr += (1 << tce_order)) {
+		tces[(addr + (1ULL << 32)) >> tce_order] =
+			cpu_to_be64(addr | TCE_PCI_READ | TCE_PCI_WRITE);
+	}
+
+	rc = opal_pci_map_pe_dma_window(pe->phb->opal_id,
+					pe->pe_number,
+					/* reconfigure window 0 */
+					(pe->pe_number << 1) + 0,
+					1,
+					__pa(tces),
+					table_size,
+					1 << tce_order);
+	if (rc == OPAL_SUCCESS) {
+		pe_info(pe, "Using 64-bit DMA iommu bypass (through TVE#0)\n");
+		return 0;
+	}
+err:
+	pe_err(pe, "Error configuring 64-bit DMA bypass\n");
+	return -EIO;
+}
+
+static bool pnv_pci_ioda_iommu_bypass_supported(struct pci_dev *pdev,
+		u64 dma_mask)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus);
+	struct pci_dn *pdn = pci_get_pdn(pdev);
+	struct pnv_ioda_pe *pe;
+
+	if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
+		return false;
+
+	pe = &phb->ioda.pe_array[pdn->pe_number];
+	if (pe->tce_bypass_enabled) {
+		u64 top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1;
+		if (dma_mask >= top)
+			return true;
+	}
+
+	/*
+	 * If the device can't set the TCE bypass bit but still wants
+	 * to access 4GB or more, on PHB3 we can reconfigure TVE#0 to
+	 * bypass the 32-bit region and be usable for 64-bit DMAs.
+	 * The device needs to be able to address all of this space.
+	 */
+	if (dma_mask >> 32 &&
+	    dma_mask > (memory_hotplug_max() + (1ULL << 32)) &&
+	    /* pe->pdev should be set if it's a single device, pe->pbus if not */
+	    (pe->device_count == 1 || !pe->pbus) &&
+	    phb->model == PNV_PHB_MODEL_PHB3) {
+		/* Configure the bypass mode */
+		s64 rc = pnv_pci_ioda_dma_64bit_bypass(pe);
+		if (rc)
+			return false;
+		/* 4GB offset bypasses 32-bit space */
+		pdev->dev.archdata.dma_offset = (1ULL << 32);
+		return true;
+	}
+
+	return false;
+}
+
+static inline __be64 __iomem *pnv_ioda_get_inval_reg(struct pnv_phb *phb)
+{
+	return phb->regs + 0x210;
+}
+
+static void pnv_pci_p7ioc_tce_invalidate(struct iommu_table *tbl,
+		unsigned long index, unsigned long npages)
+{
+	struct iommu_table_group_link *tgl = list_first_entry_or_null(
+			&tbl->it_group_list, struct iommu_table_group_link,
+			next);
+	struct pnv_ioda_pe *pe = container_of(tgl->table_group,
+			struct pnv_ioda_pe, table_group);
+	__be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb);
+	unsigned long start, end, inc;
+
+	start = __pa(((__be64 *)tbl->it_base) + index - tbl->it_offset);
+	end = __pa(((__be64 *)tbl->it_base) + index - tbl->it_offset +
+			npages - 1);
+
+	/* p7ioc-style invalidation, 2 TCEs per write */
+	start |= (1ull << 63);
+	end |= (1ull << 63);
+	inc = 16;
+        end |= inc - 1;	/* round up end to be different than start */
+
+        mb(); /* Ensure above stores are visible */
+        while (start <= end) {
+		__raw_writeq_be(start, invalidate);
+                start += inc;
+        }
+
+	/*
+	 * The iommu layer will do another mb() for us on build()
+	 * and we don't care on free()
+	 */
+}
+
+static int pnv_ioda1_tce_build(struct iommu_table *tbl, long index,
+		long npages, unsigned long uaddr,
+		enum dma_data_direction direction,
+		unsigned long attrs)
+{
+	int ret = pnv_tce_build(tbl, index, npages, uaddr, direction,
+			attrs);
+
+	if (!ret)
+		pnv_pci_p7ioc_tce_invalidate(tbl, index, npages);
+
+	return ret;
+}
+
+#ifdef CONFIG_IOMMU_API
+/* Common for IODA1 and IODA2 */
+static int pnv_ioda_tce_xchg_no_kill(struct iommu_table *tbl, long index,
+		unsigned long *hpa, enum dma_data_direction *direction)
+{
+	return pnv_tce_xchg(tbl, index, hpa, direction);
+}
+#endif
+
+static void pnv_ioda1_tce_free(struct iommu_table *tbl, long index,
+		long npages)
+{
+	pnv_tce_free(tbl, index, npages);
+
+	pnv_pci_p7ioc_tce_invalidate(tbl, index, npages);
+}
+
+static struct iommu_table_ops pnv_ioda1_iommu_ops = {
+	.set = pnv_ioda1_tce_build,
+#ifdef CONFIG_IOMMU_API
+	.xchg_no_kill = pnv_ioda_tce_xchg_no_kill,
+	.tce_kill = pnv_pci_p7ioc_tce_invalidate,
+	.useraddrptr = pnv_tce_useraddrptr,
+#endif
+	.clear = pnv_ioda1_tce_free,
+	.get = pnv_tce_get,
+};
+
+#define PHB3_TCE_KILL_INVAL_ALL		PPC_BIT(0)
+#define PHB3_TCE_KILL_INVAL_PE		PPC_BIT(1)
+#define PHB3_TCE_KILL_INVAL_ONE		PPC_BIT(2)
+
+static inline void pnv_pci_phb3_tce_invalidate_pe(struct pnv_ioda_pe *pe)
+{
+	/* 01xb - invalidate TCEs that match the specified PE# */
+	__be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb);
+	unsigned long val = PHB3_TCE_KILL_INVAL_PE | (pe->pe_number & 0xFF);
+
+	mb(); /* Ensure above stores are visible */
+	__raw_writeq_be(val, invalidate);
+}
+
+static void pnv_pci_phb3_tce_invalidate(struct pnv_ioda_pe *pe,
+					unsigned shift, unsigned long index,
+					unsigned long npages)
+{
+	__be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb);
+	unsigned long start, end, inc;
+
+	/* We'll invalidate DMA address in PE scope */
+	start = PHB3_TCE_KILL_INVAL_ONE;
+	start |= (pe->pe_number & 0xFF);
+	end = start;
+
+	/* Figure out the start, end and step */
+	start |= (index << shift);
+	end |= ((index + npages - 1) << shift);
+	inc = (0x1ull << shift);
+	mb();
+
+	while (start <= end) {
+		__raw_writeq_be(start, invalidate);
+		start += inc;
+	}
+}
+
+static inline void pnv_pci_ioda2_tce_invalidate_pe(struct pnv_ioda_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb;
+
+	if (phb->model == PNV_PHB_MODEL_PHB3 && phb->regs)
+		pnv_pci_phb3_tce_invalidate_pe(pe);
+	else
+		opal_pci_tce_kill(phb->opal_id, OPAL_PCI_TCE_KILL_PE,
+				  pe->pe_number, 0, 0, 0);
+}
+
+static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
+		unsigned long index, unsigned long npages)
+{
+	struct iommu_table_group_link *tgl;
+
+	list_for_each_entry_lockless(tgl, &tbl->it_group_list, next) {
+		struct pnv_ioda_pe *pe = container_of(tgl->table_group,
+				struct pnv_ioda_pe, table_group);
+		struct pnv_phb *phb = pe->phb;
+		unsigned int shift = tbl->it_page_shift;
+
+		if (phb->model == PNV_PHB_MODEL_PHB3 && phb->regs)
+			pnv_pci_phb3_tce_invalidate(pe, shift,
+						    index, npages);
+		else
+			opal_pci_tce_kill(phb->opal_id,
+					  OPAL_PCI_TCE_KILL_PAGES,
+					  pe->pe_number, 1u << shift,
+					  index << shift, npages);
+	}
+}
+
+static int pnv_ioda2_tce_build(struct iommu_table *tbl, long index,
+		long npages, unsigned long uaddr,
+		enum dma_data_direction direction,
+		unsigned long attrs)
+{
+	int ret = pnv_tce_build(tbl, index, npages, uaddr, direction,
+			attrs);
+
+	if (!ret)
+		pnv_pci_ioda2_tce_invalidate(tbl, index, npages);
+
+	return ret;
+}
+
+static void pnv_ioda2_tce_free(struct iommu_table *tbl, long index,
+		long npages)
+{
+	pnv_tce_free(tbl, index, npages);
+
+	pnv_pci_ioda2_tce_invalidate(tbl, index, npages);
+}
+
+static struct iommu_table_ops pnv_ioda2_iommu_ops = {
+	.set = pnv_ioda2_tce_build,
+#ifdef CONFIG_IOMMU_API
+	.xchg_no_kill = pnv_ioda_tce_xchg_no_kill,
+	.tce_kill = pnv_pci_ioda2_tce_invalidate,
+	.useraddrptr = pnv_tce_useraddrptr,
+#endif
+	.clear = pnv_ioda2_tce_free,
+	.get = pnv_tce_get,
+	.free = pnv_pci_ioda2_table_free_pages,
+};
+
+static int pnv_pci_ioda_dev_dma_weight(struct pci_dev *dev, void *data)
+{
+	unsigned int *weight = (unsigned int *)data;
+
+	/* This is quite simplistic. The "base" weight of a device
+	 * is 10. 0 means no DMA is to be accounted for it.
+	 */
+	if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL)
+		return 0;
+
+	if (dev->class == PCI_CLASS_SERIAL_USB_UHCI ||
+	    dev->class == PCI_CLASS_SERIAL_USB_OHCI ||
+	    dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+		*weight += 3;
+	else if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)
+		*weight += 15;
+	else
+		*weight += 10;
+
+	return 0;
+}
+
+static unsigned int pnv_pci_ioda_pe_dma_weight(struct pnv_ioda_pe *pe)
+{
+	unsigned int weight = 0;
+
+	/* SRIOV VF has same DMA32 weight as its PF */
+#ifdef CONFIG_PCI_IOV
+	if ((pe->flags & PNV_IODA_PE_VF) && pe->parent_dev) {
+		pnv_pci_ioda_dev_dma_weight(pe->parent_dev, &weight);
+		return weight;
+	}
+#endif
+
+	if ((pe->flags & PNV_IODA_PE_DEV) && pe->pdev) {
+		pnv_pci_ioda_dev_dma_weight(pe->pdev, &weight);
+	} else if ((pe->flags & PNV_IODA_PE_BUS) && pe->pbus) {
+		struct pci_dev *pdev;
+
+		list_for_each_entry(pdev, &pe->pbus->devices, bus_list)
+			pnv_pci_ioda_dev_dma_weight(pdev, &weight);
+	} else if ((pe->flags & PNV_IODA_PE_BUS_ALL) && pe->pbus) {
+		pci_walk_bus(pe->pbus, pnv_pci_ioda_dev_dma_weight, &weight);
+	}
+
+	return weight;
+}
+
+static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
+				       struct pnv_ioda_pe *pe)
+{
+
+	struct page *tce_mem = NULL;
+	struct iommu_table *tbl;
+	unsigned int weight, total_weight = 0;
+	unsigned int tce32_segsz, base, segs, avail, i;
+	int64_t rc;
+	void *addr;
+
+	/* XXX FIXME: Handle 64-bit only DMA devices */
+	/* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
+	/* XXX FIXME: Allocate multi-level tables on PHB3 */
+	weight = pnv_pci_ioda_pe_dma_weight(pe);
+	if (!weight)
+		return;
+
+	pci_walk_bus(phb->hose->bus, pnv_pci_ioda_dev_dma_weight,
+		     &total_weight);
+	segs = (weight * phb->ioda.dma32_count) / total_weight;
+	if (!segs)
+		segs = 1;
+
+	/*
+	 * Allocate contiguous DMA32 segments. We begin with the expected
+	 * number of segments. With one more attempt, the number of DMA32
+	 * segments to be allocated is decreased by one until one segment
+	 * is allocated successfully.
+	 */
+	do {
+		for (base = 0; base <= phb->ioda.dma32_count - segs; base++) {
+			for (avail = 0, i = base; i < base + segs; i++) {
+				if (phb->ioda.dma32_segmap[i] ==
+				    IODA_INVALID_PE)
+					avail++;
+			}
+
+			if (avail == segs)
+				goto found;
+		}
+	} while (--segs);
+
+	if (!segs) {
+		pe_warn(pe, "No available DMA32 segments\n");
+		return;
+	}
+
+found:
+	tbl = pnv_pci_table_alloc(phb->hose->node);
+	if (WARN_ON(!tbl))
+		return;
+
+	iommu_register_group(&pe->table_group, phb->hose->global_number,
+			pe->pe_number);
+	pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group);
+
+	/* Grab a 32-bit TCE table */
+	pe_info(pe, "DMA weight %d (%d), assigned (%d) %d DMA32 segments\n",
+		weight, total_weight, base, segs);
+	pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
+		base * PNV_IODA1_DMA32_SEGSIZE,
+		(base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1);
+
+	/* XXX Currently, we allocate one big contiguous table for the
+	 * TCEs. We only really need one chunk per 256M of TCE space
+	 * (ie per segment) but that's an optimization for later, it
+	 * requires some added smarts with our get/put_tce implementation
+	 *
+	 * Each TCE page is 4KB in size and each TCE entry occupies 8
+	 * bytes
+	 */
+	tce32_segsz = PNV_IODA1_DMA32_SEGSIZE >> (IOMMU_PAGE_SHIFT_4K - 3);
+	tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
+				   get_order(tce32_segsz * segs));
+	if (!tce_mem) {
+		pe_err(pe, " Failed to allocate a 32-bit TCE memory\n");
+		goto fail;
+	}
+	addr = page_address(tce_mem);
+	memset(addr, 0, tce32_segsz * segs);
+
+	/* Configure HW */
+	for (i = 0; i < segs; i++) {
+		rc = opal_pci_map_pe_dma_window(phb->opal_id,
+					      pe->pe_number,
+					      base + i, 1,
+					      __pa(addr) + tce32_segsz * i,
+					      tce32_segsz, IOMMU_PAGE_SIZE_4K);
+		if (rc) {
+			pe_err(pe, " Failed to configure 32-bit TCE table, err %lld\n",
+			       rc);
+			goto fail;
+		}
+	}
+
+	/* Setup DMA32 segment mapping */
+	for (i = base; i < base + segs; i++)
+		phb->ioda.dma32_segmap[i] = pe->pe_number;
+
+	/* Setup linux iommu table */
+	pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs,
+				  base * PNV_IODA1_DMA32_SEGSIZE,
+				  IOMMU_PAGE_SHIFT_4K);
+
+	tbl->it_ops = &pnv_ioda1_iommu_ops;
+	pe->table_group.tce32_start = tbl->it_offset << tbl->it_page_shift;
+	pe->table_group.tce32_size = tbl->it_size << tbl->it_page_shift;
+	tbl->it_index = (phb->hose->global_number << 16) | pe->pe_number;
+	if (!iommu_init_table(tbl, phb->hose->node, 0, 0))
+		panic("Failed to initialize iommu table");
+
+	pe->dma_setup_done = true;
+	return;
+ fail:
+	/* XXX Failure: Try to fallback to 64-bit only ? */
+	if (tce_mem)
+		__free_pages(tce_mem, get_order(tce32_segsz * segs));
+	if (tbl) {
+		pnv_pci_unlink_table_and_group(tbl, &pe->table_group);
+		iommu_tce_table_put(tbl);
+	}
+}
+
+static long pnv_pci_ioda2_set_window(struct iommu_table_group *table_group,
+		int num, struct iommu_table *tbl)
+{
+	struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe,
+			table_group);
+	struct pnv_phb *phb = pe->phb;
+	int64_t rc;
+	const unsigned long size = tbl->it_indirect_levels ?
+			tbl->it_level_size : tbl->it_size;
+	const __u64 start_addr = tbl->it_offset << tbl->it_page_shift;
+	const __u64 win_size = tbl->it_size << tbl->it_page_shift;
+
+	pe_info(pe, "Setting up window#%d %llx..%llx pg=%lx\n",
+		num, start_addr, start_addr + win_size - 1,
+		IOMMU_PAGE_SIZE(tbl));
+
+	/*
+	 * Map TCE table through TVT. The TVE index is the PE number
+	 * shifted by 1 bit for 32-bits DMA space.
+	 */
+	rc = opal_pci_map_pe_dma_window(phb->opal_id,
+			pe->pe_number,
+			(pe->pe_number << 1) + num,
+			tbl->it_indirect_levels + 1,
+			__pa(tbl->it_base),
+			size << 3,
+			IOMMU_PAGE_SIZE(tbl));
+	if (rc) {
+		pe_err(pe, "Failed to configure TCE table, err %lld\n", rc);
+		return rc;
+	}
+
+	pnv_pci_link_table_and_group(phb->hose->node, num,
+			tbl, &pe->table_group);
+	pnv_pci_ioda2_tce_invalidate_pe(pe);
+
+	return 0;
+}
+
+static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable)
+{
+	uint16_t window_id = (pe->pe_number << 1 ) + 1;
+	int64_t rc;
+
+	pe_info(pe, "%sabling 64-bit DMA bypass\n", enable ? "En" : "Dis");
+	if (enable) {
+		phys_addr_t top = memblock_end_of_DRAM();
+
+		top = roundup_pow_of_two(top);
+		rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
+						     pe->pe_number,
+						     window_id,
+						     pe->tce_bypass_base,
+						     top);
+	} else {
+		rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
+						     pe->pe_number,
+						     window_id,
+						     pe->tce_bypass_base,
+						     0);
+	}
+	if (rc)
+		pe_err(pe, "OPAL error %lld configuring bypass window\n", rc);
+	else
+		pe->tce_bypass_enabled = enable;
+}
+
+static long pnv_pci_ioda2_create_table(struct iommu_table_group *table_group,
+		int num, __u32 page_shift, __u64 window_size, __u32 levels,
+		bool alloc_userspace_copy, struct iommu_table **ptbl)
+{
+	struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe,
+			table_group);
+	int nid = pe->phb->hose->node;
+	__u64 bus_offset = num ? pe->tce_bypass_base : table_group->tce32_start;
+	long ret;
+	struct iommu_table *tbl;
+
+	tbl = pnv_pci_table_alloc(nid);
+	if (!tbl)
+		return -ENOMEM;
+
+	tbl->it_ops = &pnv_ioda2_iommu_ops;
+
+	ret = pnv_pci_ioda2_table_alloc_pages(nid,
+			bus_offset, page_shift, window_size,
+			levels, alloc_userspace_copy, tbl);
+	if (ret) {
+		iommu_tce_table_put(tbl);
+		return ret;
+	}
+
+	*ptbl = tbl;
+
+	return 0;
+}
+
+static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe)
+{
+	struct iommu_table *tbl = NULL;
+	long rc;
+	unsigned long res_start, res_end;
+
+	/*
+	 * crashkernel= specifies the kdump kernel's maximum memory at
+	 * some offset and there is no guaranteed the result is a power
+	 * of 2, which will cause errors later.
+	 */
+	const u64 max_memory = __rounddown_pow_of_two(memory_hotplug_max());
+
+	/*
+	 * In memory constrained environments, e.g. kdump kernel, the
+	 * DMA window can be larger than available memory, which will
+	 * cause errors later.
+	 */
+	const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER - 1);
+
+	/*
+	 * We create the default window as big as we can. The constraint is
+	 * the max order of allocation possible. The TCE table is likely to
+	 * end up being multilevel and with on-demand allocation in place,
+	 * the initial use is not going to be huge as the default window aims
+	 * to support crippled devices (i.e. not fully 64bit DMAble) only.
+	 */
+	/* iommu_table::it_map uses 1 bit per IOMMU page, hence 8 */
+	const u64 window_size = min((maxblock * 8) << PAGE_SHIFT, max_memory);
+	/* Each TCE level cannot exceed maxblock so go multilevel if needed */
+	unsigned long tces_order = ilog2(window_size >> PAGE_SHIFT);
+	unsigned long tcelevel_order = ilog2(maxblock >> 3);
+	unsigned int levels = tces_order / tcelevel_order;
+
+	if (tces_order % tcelevel_order)
+		levels += 1;
+	/*
+	 * We try to stick to default levels (which is >1 at the moment) in
+	 * order to save memory by relying on on-demain TCE level allocation.
+	 */
+	levels = max_t(unsigned int, levels, POWERNV_IOMMU_DEFAULT_LEVELS);
+
+	rc = pnv_pci_ioda2_create_table(&pe->table_group, 0, PAGE_SHIFT,
+			window_size, levels, false, &tbl);
+	if (rc) {
+		pe_err(pe, "Failed to create 32-bit TCE table, err %ld",
+				rc);
+		return rc;
+	}
+
+	/* We use top part of 32bit space for MMIO so exclude it from DMA */
+	res_start = 0;
+	res_end = 0;
+	if (window_size > pe->phb->ioda.m32_pci_base) {
+		res_start = pe->phb->ioda.m32_pci_base >> tbl->it_page_shift;
+		res_end = min(window_size, SZ_4G) >> tbl->it_page_shift;
+	}
+
+	tbl->it_index = (pe->phb->hose->global_number << 16) | pe->pe_number;
+	if (iommu_init_table(tbl, pe->phb->hose->node, res_start, res_end))
+		rc = pnv_pci_ioda2_set_window(&pe->table_group, 0, tbl);
+	else
+		rc = -ENOMEM;
+	if (rc) {
+		pe_err(pe, "Failed to configure 32-bit TCE table, err %ld\n", rc);
+		iommu_tce_table_put(tbl);
+		tbl = NULL; /* This clears iommu_table_base below */
+	}
+	if (!pnv_iommu_bypass_disabled)
+		pnv_pci_ioda2_set_bypass(pe, true);
+
+	/*
+	 * Set table base for the case of IOMMU DMA use. Usually this is done
+	 * from dma_dev_setup() which is not called when a device is returned
+	 * from VFIO so do it here.
+	 */
+	if (pe->pdev)
+		set_iommu_table_base(&pe->pdev->dev, tbl);
+
+	return 0;
+}
+
+static long pnv_pci_ioda2_unset_window(struct iommu_table_group *table_group,
+		int num)
+{
+	struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe,
+			table_group);
+	struct pnv_phb *phb = pe->phb;
+	long ret;
+
+	pe_info(pe, "Removing DMA window #%d\n", num);
+
+	ret = opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number,
+			(pe->pe_number << 1) + num,
+			0/* levels */, 0/* table address */,
+			0/* table size */, 0/* page size */);
+	if (ret)
+		pe_warn(pe, "Unmapping failed, ret = %ld\n", ret);
+	else
+		pnv_pci_ioda2_tce_invalidate_pe(pe);
+
+	pnv_pci_unlink_table_and_group(table_group->tables[num], table_group);
+
+	return ret;
+}
+
+#ifdef CONFIG_IOMMU_API
+unsigned long pnv_pci_ioda2_get_table_size(__u32 page_shift,
+		__u64 window_size, __u32 levels)
+{
+	unsigned long bytes = 0;
+	const unsigned window_shift = ilog2(window_size);
+	unsigned entries_shift = window_shift - page_shift;
+	unsigned table_shift = entries_shift + 3;
+	unsigned long tce_table_size = max(0x1000UL, 1UL << table_shift);
+	unsigned long direct_table_size;
+
+	if (!levels || (levels > POWERNV_IOMMU_MAX_LEVELS) ||
+			!is_power_of_2(window_size))
+		return 0;
+
+	/* Calculate a direct table size from window_size and levels */
+	entries_shift = (entries_shift + levels - 1) / levels;
+	table_shift = entries_shift + 3;
+	table_shift = max_t(unsigned, table_shift, PAGE_SHIFT);
+	direct_table_size =  1UL << table_shift;
+
+	for ( ; levels; --levels) {
+		bytes += ALIGN(tce_table_size, direct_table_size);
+
+		tce_table_size /= direct_table_size;
+		tce_table_size <<= 3;
+		tce_table_size = max_t(unsigned long,
+				tce_table_size, direct_table_size);
+	}
+
+	return bytes + bytes; /* one for HW table, one for userspace copy */
+}
+
+static long pnv_pci_ioda2_create_table_userspace(
+		struct iommu_table_group *table_group,
+		int num, __u32 page_shift, __u64 window_size, __u32 levels,
+		struct iommu_table **ptbl)
+{
+	long ret = pnv_pci_ioda2_create_table(table_group,
+			num, page_shift, window_size, levels, true, ptbl);
+
+	if (!ret)
+		(*ptbl)->it_allocated_size = pnv_pci_ioda2_get_table_size(
+				page_shift, window_size, levels);
+	return ret;
+}
+
+static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		set_iommu_table_base(&dev->dev, pe->table_group.tables[0]);
+		dev->dev.archdata.dma_offset = pe->tce_bypass_base;
+
+		if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
+			pnv_ioda_setup_bus_dma(pe, dev->subordinate);
+	}
+}
+
+static void pnv_ioda2_take_ownership(struct iommu_table_group *table_group)
+{
+	struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe,
+						table_group);
+	/* Store @tbl as pnv_pci_ioda2_unset_window() resets it */
+	struct iommu_table *tbl = pe->table_group.tables[0];
+
+	pnv_pci_ioda2_set_bypass(pe, false);
+	pnv_pci_ioda2_unset_window(&pe->table_group, 0);
+	if (pe->pbus)
+		pnv_ioda_setup_bus_dma(pe, pe->pbus);
+	else if (pe->pdev)
+		set_iommu_table_base(&pe->pdev->dev, NULL);
+	iommu_tce_table_put(tbl);
+}
+
+static void pnv_ioda2_release_ownership(struct iommu_table_group *table_group)
+{
+	struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe,
+						table_group);
+
+	pnv_pci_ioda2_setup_default_config(pe);
+	if (pe->pbus)
+		pnv_ioda_setup_bus_dma(pe, pe->pbus);
+}
+
+static struct iommu_table_group_ops pnv_pci_ioda2_ops = {
+	.get_table_size = pnv_pci_ioda2_get_table_size,
+	.create_table = pnv_pci_ioda2_create_table_userspace,
+	.set_window = pnv_pci_ioda2_set_window,
+	.unset_window = pnv_pci_ioda2_unset_window,
+	.take_ownership = pnv_ioda2_take_ownership,
+	.release_ownership = pnv_ioda2_release_ownership,
+};
+#endif
+
+void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
+				struct pnv_ioda_pe *pe)
+{
+	int64_t rc;
+
+	/* TVE #1 is selected by PCI address bit 59 */
+	pe->tce_bypass_base = 1ull << 59;
+
+	/* The PE will reserve all possible 32-bits space */
+	pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n",
+		phb->ioda.m32_pci_base);
+
+	/* Setup linux iommu table */
+	pe->table_group.tce32_start = 0;
+	pe->table_group.tce32_size = phb->ioda.m32_pci_base;
+	pe->table_group.max_dynamic_windows_supported =
+			IOMMU_TABLE_GROUP_MAX_TABLES;
+	pe->table_group.max_levels = POWERNV_IOMMU_MAX_LEVELS;
+	pe->table_group.pgsizes = pnv_ioda_parse_tce_sizes(phb);
+
+	rc = pnv_pci_ioda2_setup_default_config(pe);
+	if (rc)
+		return;
+
+#ifdef CONFIG_IOMMU_API
+	pe->table_group.ops = &pnv_pci_ioda2_ops;
+	iommu_register_group(&pe->table_group, phb->hose->global_number,
+			     pe->pe_number);
+#endif
+	pe->dma_setup_done = true;
+}
+
+/*
+ * Called from KVM in real mode to EOI passthru interrupts. The ICP
+ * EOI is handled directly in KVM in kvmppc_deliver_irq_passthru().
+ *
+ * The IRQ data is mapped in the PCI-MSI domain and the EOI OPAL call
+ * needs an HW IRQ number mapped in the XICS IRQ domain. The HW IRQ
+ * numbers of the in-the-middle MSI domain are vector numbers and it's
+ * good enough for OPAL. Use that.
+ */
+int64_t pnv_opal_pci_msi_eoi(struct irq_data *d)
+{
+	struct pci_controller *hose = irq_data_get_irq_chip_data(d->parent_data);
+	struct pnv_phb *phb = hose->private_data;
+
+	return opal_pci_msi_eoi(phb->opal_id, d->parent_data->hwirq);
+}
+
+/*
+ * The IRQ data is mapped in the XICS domain, with OPAL HW IRQ numbers
+ */
+static void pnv_ioda2_msi_eoi(struct irq_data *d)
+{
+	int64_t rc;
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	struct pci_controller *hose = irq_data_get_irq_chip_data(d);
+	struct pnv_phb *phb = hose->private_data;
+
+	rc = opal_pci_msi_eoi(phb->opal_id, hw_irq);
+	WARN_ON_ONCE(rc);
+
+	icp_native_eoi(d);
+}
+
+/* P8/CXL only */
+void pnv_set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq)
+{
+	struct irq_data *idata;
+	struct irq_chip *ichip;
+
+	/* The MSI EOI OPAL call is only needed on PHB3 */
+	if (phb->model != PNV_PHB_MODEL_PHB3)
+		return;
+
+	if (!phb->ioda.irq_chip_init) {
+		/*
+		 * First time we setup an MSI IRQ, we need to setup the
+		 * corresponding IRQ chip to route correctly.
+		 */
+		idata = irq_get_irq_data(virq);
+		ichip = irq_data_get_irq_chip(idata);
+		phb->ioda.irq_chip_init = 1;
+		phb->ioda.irq_chip = *ichip;
+		phb->ioda.irq_chip.irq_eoi = pnv_ioda2_msi_eoi;
+	}
+	irq_set_chip(virq, &phb->ioda.irq_chip);
+	irq_set_chip_data(virq, phb->hose);
+}
+
+static struct irq_chip pnv_pci_msi_irq_chip;
+
+/*
+ * Returns true iff chip is something that we could call
+ * pnv_opal_pci_msi_eoi for.
+ */
+bool is_pnv_opal_msi(struct irq_chip *chip)
+{
+	return chip == &pnv_pci_msi_irq_chip;
+}
+EXPORT_SYMBOL_GPL(is_pnv_opal_msi);
+
+static int __pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
+				    unsigned int xive_num,
+				    unsigned int is_64, struct msi_msg *msg)
+{
+	struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
+	__be32 data;
+	int rc;
+
+	dev_dbg(&dev->dev, "%s: setup %s-bit MSI for vector #%d\n", __func__,
+		is_64 ? "64" : "32", xive_num);
+
+	/* No PE assigned ? bail out ... no MSI for you ! */
+	if (pe == NULL)
+		return -ENXIO;
+
+	/* Check if we have an MVE */
+	if (pe->mve_number < 0)
+		return -ENXIO;
+
+	/* Force 32-bit MSI on some broken devices */
+	if (dev->no_64bit_msi)
+		is_64 = 0;
+
+	/* Assign XIVE to PE */
+	rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
+	if (rc) {
+		pr_warn("%s: OPAL error %d setting XIVE %d PE\n",
+			pci_name(dev), rc, xive_num);
+		return -EIO;
+	}
+
+	if (is_64) {
+		__be64 addr64;
+
+		rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1,
+				     &addr64, &data);
+		if (rc) {
+			pr_warn("%s: OPAL error %d getting 64-bit MSI data\n",
+				pci_name(dev), rc);
+			return -EIO;
+		}
+		msg->address_hi = be64_to_cpu(addr64) >> 32;
+		msg->address_lo = be64_to_cpu(addr64) & 0xfffffffful;
+	} else {
+		__be32 addr32;
+
+		rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1,
+				     &addr32, &data);
+		if (rc) {
+			pr_warn("%s: OPAL error %d getting 32-bit MSI data\n",
+				pci_name(dev), rc);
+			return -EIO;
+		}
+		msg->address_hi = 0;
+		msg->address_lo = be32_to_cpu(addr32);
+	}
+	msg->data = be32_to_cpu(data);
+
+	return 0;
+}
+
+/*
+ * The msi_free() op is called before irq_domain_free_irqs_top() when
+ * the handler data is still available. Use that to clear the XIVE
+ * controller.
+ */
+static void pnv_msi_ops_msi_free(struct irq_domain *domain,
+				 struct msi_domain_info *info,
+				 unsigned int irq)
+{
+	if (xive_enabled())
+		xive_irq_free_data(irq);
+}
+
+static struct msi_domain_ops pnv_pci_msi_domain_ops = {
+	.msi_free	= pnv_msi_ops_msi_free,
+};
+
+static void pnv_msi_shutdown(struct irq_data *d)
+{
+	d = d->parent_data;
+	if (d->chip->irq_shutdown)
+		d->chip->irq_shutdown(d);
+}
+
+static void pnv_msi_mask(struct irq_data *d)
+{
+	pci_msi_mask_irq(d);
+	irq_chip_mask_parent(d);
+}
+
+static void pnv_msi_unmask(struct irq_data *d)
+{
+	pci_msi_unmask_irq(d);
+	irq_chip_unmask_parent(d);
+}
+
+static struct irq_chip pnv_pci_msi_irq_chip = {
+	.name		= "PNV-PCI-MSI",
+	.irq_shutdown	= pnv_msi_shutdown,
+	.irq_mask	= pnv_msi_mask,
+	.irq_unmask	= pnv_msi_unmask,
+	.irq_eoi	= irq_chip_eoi_parent,
+};
+
+static struct msi_domain_info pnv_msi_domain_info = {
+	.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		  MSI_FLAG_MULTI_PCI_MSI  | MSI_FLAG_PCI_MSIX),
+	.ops   = &pnv_pci_msi_domain_ops,
+	.chip  = &pnv_pci_msi_irq_chip,
+};
+
+static void pnv_msi_compose_msg(struct irq_data *d, struct msi_msg *msg)
+{
+	struct msi_desc *entry = irq_data_get_msi_desc(d);
+	struct pci_dev *pdev = msi_desc_to_pci_dev(entry);
+	struct pci_controller *hose = irq_data_get_irq_chip_data(d);
+	struct pnv_phb *phb = hose->private_data;
+	int rc;
+
+	rc = __pnv_pci_ioda_msi_setup(phb, pdev, d->hwirq,
+				      entry->pci.msi_attrib.is_64, msg);
+	if (rc)
+		dev_err(&pdev->dev, "Failed to setup %s-bit MSI #%ld : %d\n",
+			entry->pci.msi_attrib.is_64 ? "64" : "32", d->hwirq, rc);
+}
+
+/*
+ * The IRQ data is mapped in the MSI domain in which HW IRQ numbers
+ * correspond to vector numbers.
+ */
+static void pnv_msi_eoi(struct irq_data *d)
+{
+	struct pci_controller *hose = irq_data_get_irq_chip_data(d);
+	struct pnv_phb *phb = hose->private_data;
+
+	if (phb->model == PNV_PHB_MODEL_PHB3) {
+		/*
+		 * The EOI OPAL call takes an OPAL HW IRQ number but
+		 * since it is translated into a vector number in
+		 * OPAL, use that directly.
+		 */
+		WARN_ON_ONCE(opal_pci_msi_eoi(phb->opal_id, d->hwirq));
+	}
+
+	irq_chip_eoi_parent(d);
+}
+
+static struct irq_chip pnv_msi_irq_chip = {
+	.name			= "PNV-MSI",
+	.irq_shutdown		= pnv_msi_shutdown,
+	.irq_mask		= irq_chip_mask_parent,
+	.irq_unmask		= irq_chip_unmask_parent,
+	.irq_eoi		= pnv_msi_eoi,
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+	.irq_compose_msi_msg	= pnv_msi_compose_msg,
+};
+
+static int pnv_irq_parent_domain_alloc(struct irq_domain *domain,
+				       unsigned int virq, int hwirq)
+{
+	struct irq_fwspec parent_fwspec;
+	int ret;
+
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	parent_fwspec.param_count = 2;
+	parent_fwspec.param[0] = hwirq;
+	parent_fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int pnv_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				unsigned int nr_irqs, void *arg)
+{
+	struct pci_controller *hose = domain->host_data;
+	struct pnv_phb *phb = hose->private_data;
+	msi_alloc_info_t *info = arg;
+	struct pci_dev *pdev = msi_desc_to_pci_dev(info->desc);
+	int hwirq;
+	int i, ret;
+
+	hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, nr_irqs);
+	if (hwirq < 0) {
+		dev_warn(&pdev->dev, "failed to find a free MSI\n");
+		return -ENOSPC;
+	}
+
+	dev_dbg(&pdev->dev, "%s bridge %pOF %d/%x #%d\n", __func__,
+		hose->dn, virq, hwirq, nr_irqs);
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = pnv_irq_parent_domain_alloc(domain, virq + i,
+						  phb->msi_base + hwirq + i);
+		if (ret)
+			goto out;
+
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+					      &pnv_msi_irq_chip, hose);
+	}
+
+	return 0;
+
+out:
+	irq_domain_free_irqs_parent(domain, virq, i - 1);
+	msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, nr_irqs);
+	return ret;
+}
+
+static void pnv_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+				unsigned int nr_irqs)
+{
+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+	struct pci_controller *hose = irq_data_get_irq_chip_data(d);
+	struct pnv_phb *phb = hose->private_data;
+
+	pr_debug("%s bridge %pOF %d/%lx #%d\n", __func__, hose->dn,
+		 virq, d->hwirq, nr_irqs);
+
+	msi_bitmap_free_hwirqs(&phb->msi_bmp, d->hwirq, nr_irqs);
+	/* XIVE domain is cleared through ->msi_free() */
+}
+
+static const struct irq_domain_ops pnv_irq_domain_ops = {
+	.alloc  = pnv_irq_domain_alloc,
+	.free   = pnv_irq_domain_free,
+};
+
+static int __init pnv_msi_allocate_domains(struct pci_controller *hose, unsigned int count)
+{
+	struct pnv_phb *phb = hose->private_data;
+	struct irq_domain *parent = irq_get_default_host();
+
+	hose->fwnode = irq_domain_alloc_named_id_fwnode("PNV-MSI", phb->opal_id);
+	if (!hose->fwnode)
+		return -ENOMEM;
+
+	hose->dev_domain = irq_domain_create_hierarchy(parent, 0, count,
+						       hose->fwnode,
+						       &pnv_irq_domain_ops, hose);
+	if (!hose->dev_domain) {
+		pr_err("PCI: failed to create IRQ domain bridge %pOF (domain %d)\n",
+		       hose->dn, hose->global_number);
+		irq_domain_free_fwnode(hose->fwnode);
+		return -ENOMEM;
+	}
+
+	hose->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(hose->dn),
+						     &pnv_msi_domain_info,
+						     hose->dev_domain);
+	if (!hose->msi_domain) {
+		pr_err("PCI: failed to create MSI IRQ domain bridge %pOF (domain %d)\n",
+		       hose->dn, hose->global_number);
+		irq_domain_free_fwnode(hose->fwnode);
+		irq_domain_remove(hose->dev_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void __init pnv_pci_init_ioda_msis(struct pnv_phb *phb)
+{
+	unsigned int count;
+	const __be32 *prop = of_get_property(phb->hose->dn,
+					     "ibm,opal-msi-ranges", NULL);
+	if (!prop) {
+		/* BML Fallback */
+		prop = of_get_property(phb->hose->dn, "msi-ranges", NULL);
+	}
+	if (!prop)
+		return;
+
+	phb->msi_base = be32_to_cpup(prop);
+	count = be32_to_cpup(prop + 1);
+	if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) {
+		pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
+		       phb->hose->global_number);
+		return;
+	}
+
+	pr_info("  Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
+		count, phb->msi_base);
+
+	pnv_msi_allocate_domains(phb->hose, count);
+}
+
+static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe,
+				  struct resource *res)
+{
+	struct pnv_phb *phb = pe->phb;
+	struct pci_bus_region region;
+	int index;
+	int64_t rc;
+
+	if (!res || !res->flags || res->start > res->end)
+		return;
+
+	if (res->flags & IORESOURCE_IO) {
+		region.start = res->start - phb->ioda.io_pci_base;
+		region.end   = res->end - phb->ioda.io_pci_base;
+		index = region.start / phb->ioda.io_segsize;
+
+		while (index < phb->ioda.total_pe_num &&
+		       region.start <= region.end) {
+			phb->ioda.io_segmap[index] = pe->pe_number;
+			rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+				pe->pe_number, OPAL_IO_WINDOW_TYPE, 0, index);
+			if (rc != OPAL_SUCCESS) {
+				pr_err("%s: Error %lld mapping IO segment#%d to PE#%x\n",
+				       __func__, rc, index, pe->pe_number);
+				break;
+			}
+
+			region.start += phb->ioda.io_segsize;
+			index++;
+		}
+	} else if ((res->flags & IORESOURCE_MEM) &&
+		   !pnv_pci_is_m64(phb, res)) {
+		region.start = res->start -
+			       phb->hose->mem_offset[0] -
+			       phb->ioda.m32_pci_base;
+		region.end   = res->end -
+			       phb->hose->mem_offset[0] -
+			       phb->ioda.m32_pci_base;
+		index = region.start / phb->ioda.m32_segsize;
+
+		while (index < phb->ioda.total_pe_num &&
+		       region.start <= region.end) {
+			phb->ioda.m32_segmap[index] = pe->pe_number;
+			rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+				pe->pe_number, OPAL_M32_WINDOW_TYPE, 0, index);
+			if (rc != OPAL_SUCCESS) {
+				pr_err("%s: Error %lld mapping M32 segment#%d to PE#%x",
+				       __func__, rc, index, pe->pe_number);
+				break;
+			}
+
+			region.start += phb->ioda.m32_segsize;
+			index++;
+		}
+	}
+}
+
+/*
+ * This function is supposed to be called on basis of PE from top
+ * to bottom style. So the I/O or MMIO segment assigned to
+ * parent PE could be overridden by its child PEs if necessary.
+ */
+static void pnv_ioda_setup_pe_seg(struct pnv_ioda_pe *pe)
+{
+	struct pci_dev *pdev;
+	int i;
+
+	/*
+	 * NOTE: We only care PCI bus based PE for now. For PCI
+	 * device based PE, for example SRIOV sensitive VF should
+	 * be figured out later.
+	 */
+	BUG_ON(!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)));
+
+	list_for_each_entry(pdev, &pe->pbus->devices, bus_list) {
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+			pnv_ioda_setup_pe_res(pe, &pdev->resource[i]);
+
+		/*
+		 * If the PE contains all subordinate PCI buses, the
+		 * windows of the child bridges should be mapped to
+		 * the PE as well.
+		 */
+		if (!(pe->flags & PNV_IODA_PE_BUS_ALL) || !pci_is_bridge(pdev))
+			continue;
+		for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+			pnv_ioda_setup_pe_res(pe,
+				&pdev->resource[PCI_BRIDGE_RESOURCES + i]);
+	}
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int pnv_pci_diag_data_set(void *data, u64 val)
+{
+	struct pnv_phb *phb = data;
+	s64 ret;
+
+	/* Retrieve the diag data from firmware */
+	ret = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag_data,
+					  phb->diag_data_size);
+	if (ret != OPAL_SUCCESS)
+		return -EIO;
+
+	/* Print the diag data to the kernel log */
+	pnv_pci_dump_phb_diag_data(phb->hose, phb->diag_data);
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_diag_data_fops, NULL, pnv_pci_diag_data_set,
+			 "%llu\n");
+
+static int pnv_pci_ioda_pe_dump(void *data, u64 val)
+{
+	struct pnv_phb *phb = data;
+	int pe_num;
+
+	for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) {
+		struct pnv_ioda_pe *pe = &phb->ioda.pe_array[pe_num];
+
+		if (!test_bit(pe_num, phb->ioda.pe_alloc))
+			continue;
+
+		pe_warn(pe, "rid: %04x dev count: %2d flags: %s%s%s%s%s%s\n",
+			pe->rid, pe->device_count,
+			(pe->flags & PNV_IODA_PE_DEV) ? "dev " : "",
+			(pe->flags & PNV_IODA_PE_BUS) ? "bus " : "",
+			(pe->flags & PNV_IODA_PE_BUS_ALL) ? "all " : "",
+			(pe->flags & PNV_IODA_PE_MASTER) ? "master " : "",
+			(pe->flags & PNV_IODA_PE_SLAVE) ? "slave " : "",
+			(pe->flags & PNV_IODA_PE_VF) ? "vf " : "");
+	}
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_ioda_pe_dump_fops, NULL,
+			 pnv_pci_ioda_pe_dump, "%llu\n");
+
+#endif /* CONFIG_DEBUG_FS */
+
+static void pnv_pci_ioda_create_dbgfs(void)
+{
+#ifdef CONFIG_DEBUG_FS
+	struct pci_controller *hose, *tmp;
+	struct pnv_phb *phb;
+	char name[16];
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		phb = hose->private_data;
+
+		sprintf(name, "PCI%04x", hose->global_number);
+		phb->dbgfs = debugfs_create_dir(name, arch_debugfs_dir);
+
+		debugfs_create_file_unsafe("dump_diag_regs", 0200, phb->dbgfs,
+					   phb, &pnv_pci_diag_data_fops);
+		debugfs_create_file_unsafe("dump_ioda_pe_state", 0200, phb->dbgfs,
+					   phb, &pnv_pci_ioda_pe_dump_fops);
+	}
+#endif /* CONFIG_DEBUG_FS */
+}
+
+static void pnv_pci_enable_bridge(struct pci_bus *bus)
+{
+	struct pci_dev *dev = bus->self;
+	struct pci_bus *child;
+
+	/* Empty bus ? bail */
+	if (list_empty(&bus->devices))
+		return;
+
+	/*
+	 * If there's a bridge associated with that bus enable it. This works
+	 * around races in the generic code if the enabling is done during
+	 * parallel probing. This can be removed once those races have been
+	 * fixed.
+	 */
+	if (dev) {
+		int rc = pci_enable_device(dev);
+		if (rc)
+			pci_err(dev, "Error enabling bridge (%d)\n", rc);
+		pci_set_master(dev);
+	}
+
+	/* Perform the same to child busses */
+	list_for_each_entry(child, &bus->children, node)
+		pnv_pci_enable_bridge(child);
+}
+
+static void pnv_pci_enable_bridges(void)
+{
+	struct pci_controller *hose;
+
+	list_for_each_entry(hose, &hose_list, list_node)
+		pnv_pci_enable_bridge(hose->bus);
+}
+
+static void pnv_pci_ioda_fixup(void)
+{
+	pnv_pci_ioda_create_dbgfs();
+
+	pnv_pci_enable_bridges();
+
+#ifdef CONFIG_EEH
+	pnv_eeh_post_init();
+#endif
+}
+
+/*
+ * Returns the alignment for I/O or memory windows for P2P
+ * bridges. That actually depends on how PEs are segmented.
+ * For now, we return I/O or M32 segment size for PE sensitive
+ * P2P bridges. Otherwise, the default values (4KiB for I/O,
+ * 1MiB for memory) will be returned.
+ *
+ * The current PCI bus might be put into one PE, which was
+ * create against the parent PCI bridge. For that case, we
+ * needn't enlarge the alignment so that we can save some
+ * resources.
+ */
+static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus,
+						unsigned long type)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(bus);
+	int num_pci_bridges = 0;
+	struct pci_dev *bridge;
+
+	bridge = bus->self;
+	while (bridge) {
+		if (pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE) {
+			num_pci_bridges++;
+			if (num_pci_bridges >= 2)
+				return 1;
+		}
+
+		bridge = bridge->bus->self;
+	}
+
+	/*
+	 * We fall back to M32 if M64 isn't supported. We enforce the M64
+	 * alignment for any 64-bit resource, PCIe doesn't care and
+	 * bridges only do 64-bit prefetchable anyway.
+	 */
+	if (phb->ioda.m64_segsize && pnv_pci_is_m64_flags(type))
+		return phb->ioda.m64_segsize;
+	if (type & IORESOURCE_MEM)
+		return phb->ioda.m32_segsize;
+
+	return phb->ioda.io_segsize;
+}
+
+/*
+ * We are updating root port or the upstream port of the
+ * bridge behind the root port with PHB's windows in order
+ * to accommodate the changes on required resources during
+ * PCI (slot) hotplug, which is connected to either root
+ * port or the downstream ports of PCIe switch behind the
+ * root port.
+ */
+static void pnv_pci_fixup_bridge_resources(struct pci_bus *bus,
+					   unsigned long type)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dev *bridge = bus->self;
+	struct resource *r, *w;
+	bool msi_region = false;
+	int i;
+
+	/* Check if we need apply fixup to the bridge's windows */
+	if (!pci_is_root_bus(bridge->bus) &&
+	    !pci_is_root_bus(bridge->bus->self->bus))
+		return;
+
+	/* Fixup the resources */
+	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
+		r = &bridge->resource[PCI_BRIDGE_RESOURCES + i];
+		if (!r->flags || !r->parent)
+			continue;
+
+		w = NULL;
+		if (r->flags & type & IORESOURCE_IO)
+			w = &hose->io_resource;
+		else if (pnv_pci_is_m64(phb, r) &&
+			 (type & IORESOURCE_PREFETCH) &&
+			 phb->ioda.m64_segsize)
+			w = &hose->mem_resources[1];
+		else if (r->flags & type & IORESOURCE_MEM) {
+			w = &hose->mem_resources[0];
+			msi_region = true;
+		}
+
+		r->start = w->start;
+		r->end = w->end;
+
+		/* The 64KB 32-bits MSI region shouldn't be included in
+		 * the 32-bits bridge window. Otherwise, we can see strange
+		 * issues. One of them is EEH error observed on Garrison.
+		 *
+		 * Exclude top 1MB region which is the minimal alignment of
+		 * 32-bits bridge window.
+		 */
+		if (msi_region) {
+			r->end += 0x10000;
+			r->end -= 0x100000;
+		}
+	}
+}
+
+static void pnv_pci_configure_bus(struct pci_bus *bus)
+{
+	struct pci_dev *bridge = bus->self;
+	struct pnv_ioda_pe *pe;
+	bool all = (bridge && pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE);
+
+	dev_info(&bus->dev, "Configuring PE for bus\n");
+
+	/* Don't assign PE to PCI bus, which doesn't have subordinate devices */
+	if (WARN_ON(list_empty(&bus->devices)))
+		return;
+
+	/* Reserve PEs according to used M64 resources */
+	pnv_ioda_reserve_m64_pe(bus, NULL, all);
+
+	/*
+	 * Assign PE. We might run here because of partial hotplug.
+	 * For the case, we just pick up the existing PE and should
+	 * not allocate resources again.
+	 */
+	pe = pnv_ioda_setup_bus_PE(bus, all);
+	if (!pe)
+		return;
+
+	pnv_ioda_setup_pe_seg(pe);
+}
+
+static resource_size_t pnv_pci_default_alignment(void)
+{
+	return PAGE_SIZE;
+}
+
+/* Prevent enabling devices for which we couldn't properly
+ * assign a PE
+ */
+static bool pnv_pci_enable_device_hook(struct pci_dev *dev)
+{
+	struct pci_dn *pdn;
+
+	pdn = pci_get_pdn(dev);
+	if (!pdn || pdn->pe_number == IODA_INVALID_PE) {
+		pci_err(dev, "pci_enable_device() blocked, no PE assigned.\n");
+		return false;
+	}
+
+	return true;
+}
+
+static bool pnv_ocapi_enable_device_hook(struct pci_dev *dev)
+{
+	struct pci_dn *pdn;
+	struct pnv_ioda_pe *pe;
+
+	pdn = pci_get_pdn(dev);
+	if (!pdn)
+		return false;
+
+	if (pdn->pe_number == IODA_INVALID_PE) {
+		pe = pnv_ioda_setup_dev_PE(dev);
+		if (!pe)
+			return false;
+	}
+	return true;
+}
+
+static long pnv_pci_ioda1_unset_window(struct iommu_table_group *table_group,
+				       int num)
+{
+	struct pnv_ioda_pe *pe = container_of(table_group,
+					      struct pnv_ioda_pe, table_group);
+	struct pnv_phb *phb = pe->phb;
+	unsigned int idx;
+	long rc;
+
+	pe_info(pe, "Removing DMA window #%d\n", num);
+	for (idx = 0; idx < phb->ioda.dma32_count; idx++) {
+		if (phb->ioda.dma32_segmap[idx] != pe->pe_number)
+			continue;
+
+		rc = opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number,
+						idx, 0, 0ul, 0ul, 0ul);
+		if (rc != OPAL_SUCCESS) {
+			pe_warn(pe, "Failure %ld unmapping DMA32 segment#%d\n",
+				rc, idx);
+			return rc;
+		}
+
+		phb->ioda.dma32_segmap[idx] = IODA_INVALID_PE;
+	}
+
+	pnv_pci_unlink_table_and_group(table_group->tables[num], table_group);
+	return OPAL_SUCCESS;
+}
+
+static void pnv_pci_ioda1_release_pe_dma(struct pnv_ioda_pe *pe)
+{
+	struct iommu_table *tbl = pe->table_group.tables[0];
+	int64_t rc;
+
+	if (!pe->dma_setup_done)
+		return;
+
+	rc = pnv_pci_ioda1_unset_window(&pe->table_group, 0);
+	if (rc != OPAL_SUCCESS)
+		return;
+
+	pnv_pci_p7ioc_tce_invalidate(tbl, tbl->it_offset, tbl->it_size);
+	if (pe->table_group.group) {
+		iommu_group_put(pe->table_group.group);
+		WARN_ON(pe->table_group.group);
+	}
+
+	free_pages(tbl->it_base, get_order(tbl->it_size << 3));
+	iommu_tce_table_put(tbl);
+}
+
+void pnv_pci_ioda2_release_pe_dma(struct pnv_ioda_pe *pe)
+{
+	struct iommu_table *tbl = pe->table_group.tables[0];
+	int64_t rc;
+
+	if (!pe->dma_setup_done)
+		return;
+
+	rc = pnv_pci_ioda2_unset_window(&pe->table_group, 0);
+	if (rc)
+		pe_warn(pe, "OPAL error %lld release DMA window\n", rc);
+
+	pnv_pci_ioda2_set_bypass(pe, false);
+	if (pe->table_group.group) {
+		iommu_group_put(pe->table_group.group);
+		WARN_ON(pe->table_group.group);
+	}
+
+	iommu_tce_table_put(tbl);
+}
+
+static void pnv_ioda_free_pe_seg(struct pnv_ioda_pe *pe,
+				 unsigned short win,
+				 unsigned int *map)
+{
+	struct pnv_phb *phb = pe->phb;
+	int idx;
+	int64_t rc;
+
+	for (idx = 0; idx < phb->ioda.total_pe_num; idx++) {
+		if (map[idx] != pe->pe_number)
+			continue;
+
+		rc = opal_pci_map_pe_mmio_window(phb->opal_id,
+				phb->ioda.reserved_pe_idx, win, 0, idx);
+
+		if (rc != OPAL_SUCCESS)
+			pe_warn(pe, "Error %lld unmapping (%d) segment#%d\n",
+				rc, win, idx);
+
+		map[idx] = IODA_INVALID_PE;
+	}
+}
+
+static void pnv_ioda_release_pe_seg(struct pnv_ioda_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb;
+
+	if (phb->type == PNV_PHB_IODA1) {
+		pnv_ioda_free_pe_seg(pe, OPAL_IO_WINDOW_TYPE,
+				     phb->ioda.io_segmap);
+		pnv_ioda_free_pe_seg(pe, OPAL_M32_WINDOW_TYPE,
+				     phb->ioda.m32_segmap);
+		/* M64 is pre-configured by pnv_ioda1_init_m64() */
+	} else if (phb->type == PNV_PHB_IODA2) {
+		pnv_ioda_free_pe_seg(pe, OPAL_M32_WINDOW_TYPE,
+				     phb->ioda.m32_segmap);
+	}
+}
+
+static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb;
+	struct pnv_ioda_pe *slave, *tmp;
+
+	pe_info(pe, "Releasing PE\n");
+
+	mutex_lock(&phb->ioda.pe_list_mutex);
+	list_del(&pe->list);
+	mutex_unlock(&phb->ioda.pe_list_mutex);
+
+	switch (phb->type) {
+	case PNV_PHB_IODA1:
+		pnv_pci_ioda1_release_pe_dma(pe);
+		break;
+	case PNV_PHB_IODA2:
+		pnv_pci_ioda2_release_pe_dma(pe);
+		break;
+	case PNV_PHB_NPU_OCAPI:
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	pnv_ioda_release_pe_seg(pe);
+	pnv_ioda_deconfigure_pe(pe->phb, pe);
+
+	/* Release slave PEs in the compound PE */
+	if (pe->flags & PNV_IODA_PE_MASTER) {
+		list_for_each_entry_safe(slave, tmp, &pe->slaves, list) {
+			list_del(&slave->list);
+			pnv_ioda_free_pe(slave);
+		}
+	}
+
+	/*
+	 * The PE for root bus can be removed because of hotplug in EEH
+	 * recovery for fenced PHB error. We need to mark the PE dead so
+	 * that it can be populated again in PCI hot add path. The PE
+	 * shouldn't be destroyed as it's the global reserved resource.
+	 */
+	if (phb->ioda.root_pe_idx == pe->pe_number)
+		return;
+
+	pnv_ioda_free_pe(pe);
+}
+
+static void pnv_pci_release_device(struct pci_dev *pdev)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(pdev->bus);
+	struct pci_dn *pdn = pci_get_pdn(pdev);
+	struct pnv_ioda_pe *pe;
+
+	/* The VF PE state is torn down when sriov_disable() is called */
+	if (pdev->is_virtfn)
+		return;
+
+	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
+		return;
+
+#ifdef CONFIG_PCI_IOV
+	/*
+	 * FIXME: Try move this to sriov_disable(). It's here since we allocate
+	 * the iov state at probe time since we need to fiddle with the IOV
+	 * resources.
+	 */
+	if (pdev->is_physfn)
+		kfree(pdev->dev.archdata.iov_data);
+#endif
+
+	/*
+	 * PCI hotplug can happen as part of EEH error recovery. The @pdn
+	 * isn't removed and added afterwards in this scenario. We should
+	 * set the PE number in @pdn to an invalid one. Otherwise, the PE's
+	 * device count is decreased on removing devices while failing to
+	 * be increased on adding devices. It leads to unbalanced PE's device
+	 * count and eventually make normal PCI hotplug path broken.
+	 */
+	pe = &phb->ioda.pe_array[pdn->pe_number];
+	pdn->pe_number = IODA_INVALID_PE;
+
+	WARN_ON(--pe->device_count < 0);
+	if (pe->device_count == 0)
+		pnv_ioda_release_pe(pe);
+}
+
+static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
+{
+	struct pnv_phb *phb = hose->private_data;
+
+	opal_pci_reset(phb->opal_id, OPAL_RESET_PCI_IODA_TABLE,
+		       OPAL_ASSERT_RESET);
+}
+
+static void pnv_pci_ioda_dma_bus_setup(struct pci_bus *bus)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(bus);
+	struct pnv_ioda_pe *pe;
+
+	list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+		if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)))
+			continue;
+
+		if (!pe->pbus)
+			continue;
+
+		if (bus->number == ((pe->rid >> 8) & 0xFF)) {
+			pe->pbus = bus;
+			break;
+		}
+	}
+}
+
+static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
+	.dma_dev_setup		= pnv_pci_ioda_dma_dev_setup,
+	.dma_bus_setup		= pnv_pci_ioda_dma_bus_setup,
+	.iommu_bypass_supported	= pnv_pci_ioda_iommu_bypass_supported,
+	.enable_device_hook	= pnv_pci_enable_device_hook,
+	.release_device		= pnv_pci_release_device,
+	.window_alignment	= pnv_pci_window_alignment,
+	.setup_bridge		= pnv_pci_fixup_bridge_resources,
+	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
+	.shutdown		= pnv_pci_ioda_shutdown,
+};
+
+static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
+	.enable_device_hook	= pnv_ocapi_enable_device_hook,
+	.release_device		= pnv_pci_release_device,
+	.window_alignment	= pnv_pci_window_alignment,
+	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
+	.shutdown		= pnv_pci_ioda_shutdown,
+};
+
+static void __init pnv_pci_init_ioda_phb(struct device_node *np,
+					 u64 hub_id, int ioda_type)
+{
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+	unsigned long size, m64map_off, m32map_off, pemap_off;
+	unsigned long iomap_off = 0, dma32map_off = 0;
+	struct pnv_ioda_pe *root_pe;
+	struct resource r;
+	const __be64 *prop64;
+	const __be32 *prop32;
+	int len;
+	unsigned int segno;
+	u64 phb_id;
+	void *aux;
+	long rc;
+
+	if (!of_device_is_available(np))
+		return;
+
+	pr_info("Initializing %s PHB (%pOF)\n",	pnv_phb_names[ioda_type], np);
+
+	prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
+	if (!prop64) {
+		pr_err("  Missing \"ibm,opal-phbid\" property !\n");
+		return;
+	}
+	phb_id = be64_to_cpup(prop64);
+	pr_debug("  PHB-ID  : 0x%016llx\n", phb_id);
+
+	phb = kzalloc(sizeof(*phb), GFP_KERNEL);
+	if (!phb)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(*phb));
+
+	/* Allocate PCI controller */
+	phb->hose = hose = pcibios_alloc_controller(np);
+	if (!phb->hose) {
+		pr_err("  Can't allocate PCI controller for %pOF\n",
+		       np);
+		memblock_free(phb, sizeof(struct pnv_phb));
+		return;
+	}
+
+	spin_lock_init(&phb->lock);
+	prop32 = of_get_property(np, "bus-range", &len);
+	if (prop32 && len == 8) {
+		hose->first_busno = be32_to_cpu(prop32[0]);
+		hose->last_busno = be32_to_cpu(prop32[1]);
+	} else {
+		pr_warn("  Broken <bus-range> on %pOF\n", np);
+		hose->first_busno = 0;
+		hose->last_busno = 0xff;
+	}
+	hose->private_data = phb;
+	phb->hub_id = hub_id;
+	phb->opal_id = phb_id;
+	phb->type = ioda_type;
+	mutex_init(&phb->ioda.pe_alloc_mutex);
+
+	/* Detect specific models for error handling */
+	if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
+		phb->model = PNV_PHB_MODEL_P7IOC;
+	else if (of_device_is_compatible(np, "ibm,power8-pciex"))
+		phb->model = PNV_PHB_MODEL_PHB3;
+	else
+		phb->model = PNV_PHB_MODEL_UNKNOWN;
+
+	/* Initialize diagnostic data buffer */
+	prop32 = of_get_property(np, "ibm,phb-diag-data-size", NULL);
+	if (prop32)
+		phb->diag_data_size = be32_to_cpup(prop32);
+	else
+		phb->diag_data_size = PNV_PCI_DIAG_BUF_SIZE;
+
+	phb->diag_data = kzalloc(phb->diag_data_size, GFP_KERNEL);
+	if (!phb->diag_data)
+		panic("%s: Failed to allocate %u bytes\n", __func__,
+		      phb->diag_data_size);
+
+	/* Parse 32-bit and IO ranges (if any) */
+	pci_process_bridge_OF_ranges(hose, np, !hose->global_number);
+
+	/* Get registers */
+	if (!of_address_to_resource(np, 0, &r)) {
+		phb->regs_phys = r.start;
+		phb->regs = ioremap(r.start, resource_size(&r));
+		if (phb->regs == NULL)
+			pr_err("  Failed to map registers !\n");
+	}
+
+	/* Initialize more IODA stuff */
+	phb->ioda.total_pe_num = 1;
+	prop32 = of_get_property(np, "ibm,opal-num-pes", NULL);
+	if (prop32)
+		phb->ioda.total_pe_num = be32_to_cpup(prop32);
+	prop32 = of_get_property(np, "ibm,opal-reserved-pe", NULL);
+	if (prop32)
+		phb->ioda.reserved_pe_idx = be32_to_cpup(prop32);
+
+	/* Invalidate RID to PE# mapping */
+	for (segno = 0; segno < ARRAY_SIZE(phb->ioda.pe_rmap); segno++)
+		phb->ioda.pe_rmap[segno] = IODA_INVALID_PE;
+
+	/* Parse 64-bit MMIO range */
+	pnv_ioda_parse_m64_window(phb);
+
+	phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
+	/* FW Has already off top 64k of M32 space (MSI space) */
+	phb->ioda.m32_size += 0x10000;
+
+	phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe_num;
+	phb->ioda.m32_pci_base = hose->mem_resources[0].start - hose->mem_offset[0];
+	phb->ioda.io_size = hose->pci_io_size;
+	phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num;
+	phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
+
+	/* Calculate how many 32-bit TCE segments we have */
+	phb->ioda.dma32_count = phb->ioda.m32_pci_base /
+				PNV_IODA1_DMA32_SEGSIZE;
+
+	/* Allocate aux data & arrays. We don't have IO ports on PHB3 */
+	size = ALIGN(max_t(unsigned, phb->ioda.total_pe_num, 8) / 8,
+			sizeof(unsigned long));
+	m64map_off = size;
+	size += phb->ioda.total_pe_num * sizeof(phb->ioda.m64_segmap[0]);
+	m32map_off = size;
+	size += phb->ioda.total_pe_num * sizeof(phb->ioda.m32_segmap[0]);
+	if (phb->type == PNV_PHB_IODA1) {
+		iomap_off = size;
+		size += phb->ioda.total_pe_num * sizeof(phb->ioda.io_segmap[0]);
+		dma32map_off = size;
+		size += phb->ioda.dma32_count *
+			sizeof(phb->ioda.dma32_segmap[0]);
+	}
+	pemap_off = size;
+	size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe);
+	aux = kzalloc(size, GFP_KERNEL);
+	if (!aux)
+		panic("%s: Failed to allocate %lu bytes\n", __func__, size);
+
+	phb->ioda.pe_alloc = aux;
+	phb->ioda.m64_segmap = aux + m64map_off;
+	phb->ioda.m32_segmap = aux + m32map_off;
+	for (segno = 0; segno < phb->ioda.total_pe_num; segno++) {
+		phb->ioda.m64_segmap[segno] = IODA_INVALID_PE;
+		phb->ioda.m32_segmap[segno] = IODA_INVALID_PE;
+	}
+	if (phb->type == PNV_PHB_IODA1) {
+		phb->ioda.io_segmap = aux + iomap_off;
+		for (segno = 0; segno < phb->ioda.total_pe_num; segno++)
+			phb->ioda.io_segmap[segno] = IODA_INVALID_PE;
+
+		phb->ioda.dma32_segmap = aux + dma32map_off;
+		for (segno = 0; segno < phb->ioda.dma32_count; segno++)
+			phb->ioda.dma32_segmap[segno] = IODA_INVALID_PE;
+	}
+	phb->ioda.pe_array = aux + pemap_off;
+
+	/*
+	 * Choose PE number for root bus, which shouldn't have
+	 * M64 resources consumed by its child devices. To pick
+	 * the PE number adjacent to the reserved one if possible.
+	 */
+	pnv_ioda_reserve_pe(phb, phb->ioda.reserved_pe_idx);
+	if (phb->ioda.reserved_pe_idx == 0) {
+		phb->ioda.root_pe_idx = 1;
+		pnv_ioda_reserve_pe(phb, phb->ioda.root_pe_idx);
+	} else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1)) {
+		phb->ioda.root_pe_idx = phb->ioda.reserved_pe_idx - 1;
+		pnv_ioda_reserve_pe(phb, phb->ioda.root_pe_idx);
+	} else {
+		/* otherwise just allocate one */
+		root_pe = pnv_ioda_alloc_pe(phb, 1);
+		phb->ioda.root_pe_idx = root_pe->pe_number;
+	}
+
+	INIT_LIST_HEAD(&phb->ioda.pe_list);
+	mutex_init(&phb->ioda.pe_list_mutex);
+
+	/* Calculate how many 32-bit TCE segments we have */
+	phb->ioda.dma32_count = phb->ioda.m32_pci_base /
+				PNV_IODA1_DMA32_SEGSIZE;
+
+#if 0 /* We should really do that ... */
+	rc = opal_pci_set_phb_mem_window(opal->phb_id,
+					 window_type,
+					 window_num,
+					 starting_real_address,
+					 starting_pci_address,
+					 segment_size);
+#endif
+
+	pr_info("  %03d (%03d) PE's M32: 0x%x [segment=0x%x]\n",
+		phb->ioda.total_pe_num, phb->ioda.reserved_pe_idx,
+		phb->ioda.m32_size, phb->ioda.m32_segsize);
+	if (phb->ioda.m64_size)
+		pr_info("                 M64: 0x%lx [segment=0x%lx]\n",
+			phb->ioda.m64_size, phb->ioda.m64_segsize);
+	if (phb->ioda.io_size)
+		pr_info("                  IO: 0x%x [segment=0x%x]\n",
+			phb->ioda.io_size, phb->ioda.io_segsize);
+
+
+	phb->hose->ops = &pnv_pci_ops;
+	phb->get_pe_state = pnv_ioda_get_pe_state;
+	phb->freeze_pe = pnv_ioda_freeze_pe;
+	phb->unfreeze_pe = pnv_ioda_unfreeze_pe;
+
+	/* Setup MSI support */
+	pnv_pci_init_ioda_msis(phb);
+
+	/*
+	 * We pass the PCI probe flag PCI_REASSIGN_ALL_RSRC here
+	 * to let the PCI core do resource assignment. It's supposed
+	 * that the PCI core will do correct I/O and MMIO alignment
+	 * for the P2P bridge bars so that each PCI bus (excluding
+	 * the child P2P bridges) can form individual PE.
+	 */
+	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
+
+	switch (phb->type) {
+	case PNV_PHB_NPU_OCAPI:
+		hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops;
+		break;
+	default:
+		hose->controller_ops = pnv_pci_ioda_controller_ops;
+	}
+
+	ppc_md.pcibios_default_alignment = pnv_pci_default_alignment;
+
+#ifdef CONFIG_PCI_IOV
+	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov;
+	ppc_md.pcibios_iov_resource_alignment = pnv_pci_iov_resource_alignment;
+	ppc_md.pcibios_sriov_enable = pnv_pcibios_sriov_enable;
+	ppc_md.pcibios_sriov_disable = pnv_pcibios_sriov_disable;
+#endif
+
+	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
+
+	/* Reset IODA tables to a clean state */
+	rc = opal_pci_reset(phb_id, OPAL_RESET_PCI_IODA_TABLE, OPAL_ASSERT_RESET);
+	if (rc)
+		pr_warn("  OPAL Error %ld performing IODA table reset !\n", rc);
+
+	/*
+	 * If we're running in kdump kernel, the previous kernel never
+	 * shutdown PCI devices correctly. We already got IODA table
+	 * cleaned out. So we have to issue PHB reset to stop all PCI
+	 * transactions from previous kernel. The ppc_pci_reset_phbs
+	 * kernel parameter will force this reset too. Additionally,
+	 * if the IODA reset above failed then use a bigger hammer.
+	 * This can happen if we get a PHB fatal error in very early
+	 * boot.
+	 */
+	if (is_kdump_kernel() || pci_reset_phbs || rc) {
+		pr_info("  Issue PHB reset ...\n");
+		pnv_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
+		pnv_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE);
+	}
+
+	/* Remove M64 resource if we can't configure it successfully */
+	if (!phb->init_m64 || phb->init_m64(phb))
+		hose->mem_resources[1].flags = 0;
+
+	/* create pci_dn's for DT nodes under this PHB */
+	pci_devs_phb_init_dynamic(hose);
+}
+
+void __init pnv_pci_init_ioda2_phb(struct device_node *np)
+{
+	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2);
+}
+
+void __init pnv_pci_init_npu2_opencapi_phb(struct device_node *np)
+{
+	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_OCAPI);
+}
+
+static void pnv_npu2_opencapi_cfg_size_fixup(struct pci_dev *dev)
+{
+	struct pnv_phb *phb = pci_bus_to_pnvhb(dev->bus);
+
+	if (!machine_is(powernv))
+		return;
+
+	if (phb->type == PNV_PHB_NPU_OCAPI)
+		dev->cfg_size = PCI_CFG_SPACE_EXP_SIZE;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pnv_npu2_opencapi_cfg_size_fixup);
+
+void __init pnv_pci_init_ioda_hub(struct device_node *np)
+{
+	struct device_node *phbn;
+	const __be64 *prop64;
+	u64 hub_id;
+
+	pr_info("Probing IODA IO-Hub %pOF\n", np);
+
+	prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
+	if (!prop64) {
+		pr_err(" Missing \"ibm,opal-hubid\" property !\n");
+		return;
+	}
+	hub_id = be64_to_cpup(prop64);
+	pr_devel(" HUB-ID : 0x%016llx\n", hub_id);
+
+	/* Count child PHBs */
+	for_each_child_of_node(np, phbn) {
+		/* Look for IODA1 PHBs */
+		if (of_device_is_compatible(phbn, "ibm,ioda-phb"))
+			pnv_pci_init_ioda_phb(phbn, hub_id, PNV_PHB_IODA1);
+	}
+}