Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1310 insertions, 0 deletions

diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
new file mode 100644
index 000000000..f291b1b4d
--- /dev/null
+++ b/drivers/dma/sun4i-dma.c
@@ -0,0 +1,1310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Emilio López
+ * Emilio López <emilio@elopez.com.ar>
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "virt-dma.h"
+
+/** Common macros to normal and dedicated DMA registers **/
+
+#define SUN4I_DMA_CFG_LOADING			BIT(31)
+#define SUN4I_DMA_CFG_DST_DATA_WIDTH(width)	((width) << 25)
+#define SUN4I_DMA_CFG_DST_BURST_LENGTH(len)	((len) << 23)
+#define SUN4I_DMA_CFG_DST_ADDR_MODE(mode)	((mode) << 21)
+#define SUN4I_DMA_CFG_DST_DRQ_TYPE(type)	((type) << 16)
+#define SUN4I_DMA_CFG_SRC_DATA_WIDTH(width)	((width) << 9)
+#define SUN4I_DMA_CFG_SRC_BURST_LENGTH(len)	((len) << 7)
+#define SUN4I_DMA_CFG_SRC_ADDR_MODE(mode)	((mode) << 5)
+#define SUN4I_DMA_CFG_SRC_DRQ_TYPE(type)	(type)
+
+/** Normal DMA register values **/
+
+/* Normal DMA source/destination data request type values */
+#define SUN4I_NDMA_DRQ_TYPE_SDRAM		0x16
+#define SUN4I_NDMA_DRQ_TYPE_LIMIT		(0x1F + 1)
+
+/** Normal DMA register layout **/
+
+/* Dedicated DMA source/destination address mode values */
+#define SUN4I_NDMA_ADDR_MODE_LINEAR		0
+#define SUN4I_NDMA_ADDR_MODE_IO			1
+
+/* Normal DMA configuration register layout */
+#define SUN4I_NDMA_CFG_CONT_MODE		BIT(30)
+#define SUN4I_NDMA_CFG_WAIT_STATE(n)		((n) << 27)
+#define SUN4I_NDMA_CFG_DST_NON_SECURE		BIT(22)
+#define SUN4I_NDMA_CFG_BYTE_COUNT_MODE_REMAIN	BIT(15)
+#define SUN4I_NDMA_CFG_SRC_NON_SECURE		BIT(6)
+
+/** Dedicated DMA register values **/
+
+/* Dedicated DMA source/destination address mode values */
+#define SUN4I_DDMA_ADDR_MODE_LINEAR		0
+#define SUN4I_DDMA_ADDR_MODE_IO			1
+#define SUN4I_DDMA_ADDR_MODE_HORIZONTAL_PAGE	2
+#define SUN4I_DDMA_ADDR_MODE_VERTICAL_PAGE	3
+
+/* Dedicated DMA source/destination data request type values */
+#define SUN4I_DDMA_DRQ_TYPE_SDRAM		0x1
+#define SUN4I_DDMA_DRQ_TYPE_LIMIT		(0x1F + 1)
+
+/** Dedicated DMA register layout **/
+
+/* Dedicated DMA configuration register layout */
+#define SUN4I_DDMA_CFG_BUSY			BIT(30)
+#define SUN4I_DDMA_CFG_CONT_MODE		BIT(29)
+#define SUN4I_DDMA_CFG_DST_NON_SECURE		BIT(28)
+#define SUN4I_DDMA_CFG_BYTE_COUNT_MODE_REMAIN	BIT(15)
+#define SUN4I_DDMA_CFG_SRC_NON_SECURE		BIT(12)
+
+/* Dedicated DMA parameter register layout */
+#define SUN4I_DDMA_PARA_DST_DATA_BLK_SIZE(n)	(((n) - 1) << 24)
+#define SUN4I_DDMA_PARA_DST_WAIT_CYCLES(n)	(((n) - 1) << 16)
+#define SUN4I_DDMA_PARA_SRC_DATA_BLK_SIZE(n)	(((n) - 1) << 8)
+#define SUN4I_DDMA_PARA_SRC_WAIT_CYCLES(n)	(((n) - 1) << 0)
+
+/** DMA register offsets **/
+
+/* General register offsets */
+#define SUN4I_DMA_IRQ_ENABLE_REG		0x0
+#define SUN4I_DMA_IRQ_PENDING_STATUS_REG	0x4
+
+/* Normal DMA register offsets */
+#define SUN4I_NDMA_CHANNEL_REG_BASE(n)		(0x100 + (n) * 0x20)
+#define SUN4I_NDMA_CFG_REG			0x0
+#define SUN4I_NDMA_SRC_ADDR_REG			0x4
+#define SUN4I_NDMA_DST_ADDR_REG		0x8
+#define SUN4I_NDMA_BYTE_COUNT_REG		0xC
+
+/* Dedicated DMA register offsets */
+#define SUN4I_DDMA_CHANNEL_REG_BASE(n)		(0x300 + (n) * 0x20)
+#define SUN4I_DDMA_CFG_REG			0x0
+#define SUN4I_DDMA_SRC_ADDR_REG			0x4
+#define SUN4I_DDMA_DST_ADDR_REG		0x8
+#define SUN4I_DDMA_BYTE_COUNT_REG		0xC
+#define SUN4I_DDMA_PARA_REG			0x18
+
+/** DMA Driver **/
+
+/*
+ * Normal DMA has 8 channels, and Dedicated DMA has another 8, so
+ * that's 16 channels. As for endpoints, there's 29 and 21
+ * respectively. Given that the Normal DMA endpoints (other than
+ * SDRAM) can be used as tx/rx, we need 78 vchans in total
+ */
+#define SUN4I_NDMA_NR_MAX_CHANNELS	8
+#define SUN4I_DDMA_NR_MAX_CHANNELS	8
+#define SUN4I_DMA_NR_MAX_CHANNELS					\
+	(SUN4I_NDMA_NR_MAX_CHANNELS + SUN4I_DDMA_NR_MAX_CHANNELS)
+#define SUN4I_NDMA_NR_MAX_VCHANS	(29 * 2 - 1)
+#define SUN4I_DDMA_NR_MAX_VCHANS	21
+#define SUN4I_DMA_NR_MAX_VCHANS						\
+	(SUN4I_NDMA_NR_MAX_VCHANS + SUN4I_DDMA_NR_MAX_VCHANS)
+
+/* This set of SUN4I_DDMA timing parameters were found experimentally while
+ * working with the SPI driver and seem to make it behave correctly */
+#define SUN4I_DDMA_MAGIC_SPI_PARAMETERS \
+	(SUN4I_DDMA_PARA_DST_DATA_BLK_SIZE(1) |			\
+	 SUN4I_DDMA_PARA_SRC_DATA_BLK_SIZE(1) |				\
+	 SUN4I_DDMA_PARA_DST_WAIT_CYCLES(2) |				\
+	 SUN4I_DDMA_PARA_SRC_WAIT_CYCLES(2))
+
+/*
+ * Normal DMA supports individual transfers (segments) up to 128k.
+ * Dedicated DMA supports transfers up to 16M. We can only report
+ * one size limit, so we have to use the smaller value.
+ */
+#define SUN4I_NDMA_MAX_SEG_SIZE		SZ_128K
+#define SUN4I_DDMA_MAX_SEG_SIZE		SZ_16M
+#define SUN4I_DMA_MAX_SEG_SIZE		SUN4I_NDMA_MAX_SEG_SIZE
+
+struct sun4i_dma_pchan {
+	/* Register base of channel */
+	void __iomem			*base;
+	/* vchan currently being serviced */
+	struct sun4i_dma_vchan		*vchan;
+	/* Is this a dedicated pchan? */
+	int				is_dedicated;
+};
+
+struct sun4i_dma_vchan {
+	struct virt_dma_chan		vc;
+	struct dma_slave_config		cfg;
+	struct sun4i_dma_pchan		*pchan;
+	struct sun4i_dma_promise	*processing;
+	struct sun4i_dma_contract	*contract;
+	u8				endpoint;
+	int				is_dedicated;
+};
+
+struct sun4i_dma_promise {
+	u32				cfg;
+	u32				para;
+	dma_addr_t			src;
+	dma_addr_t			dst;
+	size_t				len;
+	struct list_head		list;
+};
+
+/* A contract is a set of promises */
+struct sun4i_dma_contract {
+	struct virt_dma_desc		vd;
+	struct list_head		demands;
+	struct list_head		completed_demands;
+	bool				is_cyclic : 1;
+	bool				use_half_int : 1;
+};
+
+struct sun4i_dma_dev {
+	DECLARE_BITMAP(pchans_used, SUN4I_DMA_NR_MAX_CHANNELS);
+	struct dma_device		slave;
+	struct sun4i_dma_pchan		*pchans;
+	struct sun4i_dma_vchan		*vchans;
+	void __iomem			*base;
+	struct clk			*clk;
+	int				irq;
+	spinlock_t			lock;
+};
+
+static struct sun4i_dma_dev *to_sun4i_dma_dev(struct dma_device *dev)
+{
+	return container_of(dev, struct sun4i_dma_dev, slave);
+}
+
+static struct sun4i_dma_vchan *to_sun4i_dma_vchan(struct dma_chan *chan)
+{
+	return container_of(chan, struct sun4i_dma_vchan, vc.chan);
+}
+
+static struct sun4i_dma_contract *to_sun4i_dma_contract(struct virt_dma_desc *vd)
+{
+	return container_of(vd, struct sun4i_dma_contract, vd);
+}
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+	return &chan->dev->device;
+}
+
+static int convert_burst(u32 maxburst)
+{
+	if (maxburst > 8)
+		return -EINVAL;
+
+	/* 1 -> 0, 4 -> 1, 8 -> 2 */
+	return (maxburst >> 2);
+}
+
+static int convert_buswidth(enum dma_slave_buswidth addr_width)
+{
+	if (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES)
+		return -EINVAL;
+
+	/* 8 (1 byte) -> 0, 16 (2 bytes) -> 1, 32 (4 bytes) -> 2 */
+	return (addr_width >> 1);
+}
+
+static void sun4i_dma_free_chan_resources(struct dma_chan *chan)
+{
+	struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan);
+
+	vchan_free_chan_resources(&vchan->vc);
+}
+
+static struct sun4i_dma_pchan *find_and_use_pchan(struct sun4i_dma_dev *priv,
+						  struct sun4i_dma_vchan *vchan)
+{
+	struct sun4i_dma_pchan *pchan = NULL, *pchans = priv->pchans;
+	unsigned long flags;
+	int i, max;
+
+	/*
+	 * pchans 0-SUN4I_NDMA_NR_MAX_CHANNELS are normal, and
+	 * SUN4I_NDMA_NR_MAX_CHANNELS+ are dedicated ones
+	 */
+	if (vchan->is_dedicated) {
+		i = SUN4I_NDMA_NR_MAX_CHANNELS;
+		max = SUN4I_DMA_NR_MAX_CHANNELS;
+	} else {
+		i = 0;
+		max = SUN4I_NDMA_NR_MAX_CHANNELS;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	for_each_clear_bit_from(i, priv->pchans_used, max) {
+		pchan = &pchans[i];
+		pchan->vchan = vchan;
+		set_bit(i, priv->pchans_used);
+		break;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return pchan;
+}
+
+static void release_pchan(struct sun4i_dma_dev *priv,
+			  struct sun4i_dma_pchan *pchan)
+{
+	unsigned long flags;
+	int nr = pchan - priv->pchans;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	pchan->vchan = NULL;
+	clear_bit(nr, priv->pchans_used);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void configure_pchan(struct sun4i_dma_pchan *pchan,
+			    struct sun4i_dma_promise *d)
+{
+	/*
+	 * Configure addresses and misc parameters depending on type
+	 * SUN4I_DDMA has an extra field with timing parameters
+	 */
+	if (pchan->is_dedicated) {
+		writel_relaxed(d->src, pchan->base + SUN4I_DDMA_SRC_ADDR_REG);
+		writel_relaxed(d->dst, pchan->base + SUN4I_DDMA_DST_ADDR_REG);
+		writel_relaxed(d->len, pchan->base + SUN4I_DDMA_BYTE_COUNT_REG);
+		writel_relaxed(d->para, pchan->base + SUN4I_DDMA_PARA_REG);
+		writel_relaxed(d->cfg, pchan->base + SUN4I_DDMA_CFG_REG);
+	} else {
+		writel_relaxed(d->src, pchan->base + SUN4I_NDMA_SRC_ADDR_REG);
+		writel_relaxed(d->dst, pchan->base + SUN4I_NDMA_DST_ADDR_REG);
+		writel_relaxed(d->len, pchan->base + SUN4I_NDMA_BYTE_COUNT_REG);
+		writel_relaxed(d->cfg, pchan->base + SUN4I_NDMA_CFG_REG);
+	}
+}
+
+static void set_pchan_interrupt(struct sun4i_dma_dev *priv,
+				struct sun4i_dma_pchan *pchan,
+				int half, int end)
+{
+	u32 reg;
+	int pchan_number = pchan - priv->pchans;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	reg = readl_relaxed(priv->base + SUN4I_DMA_IRQ_ENABLE_REG);
+
+	if (half)
+		reg |= BIT(pchan_number * 2);
+	else
+		reg &= ~BIT(pchan_number * 2);
+
+	if (end)
+		reg |= BIT(pchan_number * 2 + 1);
+	else
+		reg &= ~BIT(pchan_number * 2 + 1);
+
+	writel_relaxed(reg, priv->base + SUN4I_DMA_IRQ_ENABLE_REG);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+/*
+ * Execute pending operations on a vchan
+ *
+ * When given a vchan, this function will try to acquire a suitable
+ * pchan and, if successful, will configure it to fulfill a promise
+ * from the next pending contract.
+ *
+ * This function must be called with &vchan->vc.lock held.
+ */
+static int __execute_vchan_pending(struct sun4i_dma_dev *priv,
+				   struct sun4i_dma_vchan *vchan)
+{
+	struct sun4i_dma_promise *promise = NULL;
+	struct sun4i_dma_contract *contract = NULL;
+	struct sun4i_dma_pchan *pchan;
+	struct virt_dma_desc *vd;
+	int ret;
+
+	lockdep_assert_held(&vchan->vc.lock);
+
+	/* We need a pchan to do anything, so secure one if available */
+	pchan = find_and_use_pchan(priv, vchan);
+	if (!pchan)
+		return -EBUSY;
+
+	/*
+	 * Channel endpoints must not be repeated, so if this vchan
+	 * has already submitted some work, we can't do anything else
+	 */
+	if (vchan->processing) {
+		dev_dbg(chan2dev(&vchan->vc.chan),
+			"processing something to this endpoint already\n");
+		ret = -EBUSY;
+		goto release_pchan;
+	}
+
+	do {
+		/* Figure out which contract we're working with today */
+		vd = vchan_next_desc(&vchan->vc);
+		if (!vd) {
+			dev_dbg(chan2dev(&vchan->vc.chan),
+				"No pending contract found");
+			ret = 0;
+			goto release_pchan;
+		}
+
+		contract = to_sun4i_dma_contract(vd);
+		if (list_empty(&contract->demands)) {
+			/* The contract has been completed so mark it as such */
+			list_del(&contract->vd.node);
+			vchan_cookie_complete(&contract->vd);
+			dev_dbg(chan2dev(&vchan->vc.chan),
+				"Empty contract found and marked complete");
+		}
+	} while (list_empty(&contract->demands));
+
+	/* Now find out what we need to do */
+	promise = list_first_entry(&contract->demands,
+				   struct sun4i_dma_promise, list);
+	vchan->processing = promise;
+
+	/* ... and make it reality */
+	if (promise) {
+		vchan->contract = contract;
+		vchan->pchan = pchan;
+		set_pchan_interrupt(priv, pchan, contract->use_half_int, 1);
+		configure_pchan(pchan, promise);
+	}
+
+	return 0;
+
+release_pchan:
+	release_pchan(priv, pchan);
+	return ret;
+}
+
+static int sanitize_config(struct dma_slave_config *sconfig,
+			   enum dma_transfer_direction direction)
+{
+	switch (direction) {
+	case DMA_MEM_TO_DEV:
+		if ((sconfig->dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) ||
+		    !sconfig->dst_maxburst)
+			return -EINVAL;
+
+		if (sconfig->src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
+			sconfig->src_addr_width = sconfig->dst_addr_width;
+
+		if (!sconfig->src_maxburst)
+			sconfig->src_maxburst = sconfig->dst_maxburst;
+
+		break;
+
+	case DMA_DEV_TO_MEM:
+		if ((sconfig->src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) ||
+		    !sconfig->src_maxburst)
+			return -EINVAL;
+
+		if (sconfig->dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
+			sconfig->dst_addr_width = sconfig->src_addr_width;
+
+		if (!sconfig->dst_maxburst)
+			sconfig->dst_maxburst = sconfig->src_maxburst;
+
+		break;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+/*
+ * Generate a promise, to be used in a normal DMA contract.
+ *
+ * A NDMA promise contains all the information required to program the
+ * normal part of the DMA Engine and get data copied. A non-executed
+ * promise will live in the demands list on a contract. Once it has been
+ * completed, it will be moved to the completed demands list for later freeing.
+ * All linked promises will be freed when the corresponding contract is freed
+ */
+static struct sun4i_dma_promise *
+generate_ndma_promise(struct dma_chan *chan, dma_addr_t src, dma_addr_t dest,
+		      size_t len, struct dma_slave_config *sconfig,
+		      enum dma_transfer_direction direction)
+{
+	struct sun4i_dma_promise *promise;
+	int ret;
+
+	ret = sanitize_config(sconfig, direction);
+	if (ret)
+		return NULL;
+
+	promise = kzalloc(sizeof(*promise), GFP_NOWAIT);
+	if (!promise)
+		return NULL;
+
+	promise->src = src;
+	promise->dst = dest;
+	promise->len = len;
+	promise->cfg = SUN4I_DMA_CFG_LOADING |
+		SUN4I_NDMA_CFG_BYTE_COUNT_MODE_REMAIN;
+
+	dev_dbg(chan2dev(chan),
+		"src burst %d, dst burst %d, src buswidth %d, dst buswidth %d",
+		sconfig->src_maxburst, sconfig->dst_maxburst,
+		sconfig->src_addr_width, sconfig->dst_addr_width);
+
+	/* Source burst */
+	ret = convert_burst(sconfig->src_maxburst);
+	if (ret < 0)
+		goto fail;
+	promise->cfg |= SUN4I_DMA_CFG_SRC_BURST_LENGTH(ret);
+
+	/* Destination burst */
+	ret = convert_burst(sconfig->dst_maxburst);
+	if (ret < 0)
+		goto fail;
+	promise->cfg |= SUN4I_DMA_CFG_DST_BURST_LENGTH(ret);
+
+	/* Source bus width */
+	ret = convert_buswidth(sconfig->src_addr_width);
+	if (ret < 0)
+		goto fail;
+	promise->cfg |= SUN4I_DMA_CFG_SRC_DATA_WIDTH(ret);
+
+	/* Destination bus width */
+	ret = convert_buswidth(sconfig->dst_addr_width);
+	if (ret < 0)
+		goto fail;
+	promise->cfg |= SUN4I_DMA_CFG_DST_DATA_WIDTH(ret);
+
+	return promise;
+
+fail:
+	kfree(promise);
+	return NULL;
+}
+
+/*
+ * Generate a promise, to be used in a dedicated DMA contract.
+ *
+ * A DDMA promise contains all the information required to program the
+ * Dedicated part of the DMA Engine and get data copied. A non-executed
+ * promise will live in the demands list on a contract. Once it has been
+ * completed, it will be moved to the completed demands list for later freeing.
+ * All linked promises will be freed when the corresponding contract is freed
+ */
+static struct sun4i_dma_promise *
+generate_ddma_promise(struct dma_chan *chan, dma_addr_t src, dma_addr_t dest,
+		      size_t len, struct dma_slave_config *sconfig)
+{
+	struct sun4i_dma_promise *promise;
+	int ret;
+
+	promise = kzalloc(sizeof(*promise), GFP_NOWAIT);
+	if (!promise)
+		return NULL;
+
+	promise->src = src;
+	promise->dst = dest;
+	promise->len = len;
+	promise->cfg = SUN4I_DMA_CFG_LOADING |
+		SUN4I_DDMA_CFG_BYTE_COUNT_MODE_REMAIN;
+
+	/* Source burst */
+	ret = convert_burst(sconfig->src_maxburst);
+	if (ret < 0)
+		goto fail;
+	promise->cfg |= SUN4I_DMA_CFG_SRC_BURST_LENGTH(ret);
+
+	/* Destination burst */
+	ret = convert_burst(sconfig->dst_maxburst);
+	if (ret < 0)
+		goto fail;
+	promise->cfg |= SUN4I_DMA_CFG_DST_BURST_LENGTH(ret);
+
+	/* Source bus width */
+	ret = convert_buswidth(sconfig->src_addr_width);
+	if (ret < 0)
+		goto fail;
+	promise->cfg |= SUN4I_DMA_CFG_SRC_DATA_WIDTH(ret);
+
+	/* Destination bus width */
+	ret = convert_buswidth(sconfig->dst_addr_width);
+	if (ret < 0)
+		goto fail;
+	promise->cfg |= SUN4I_DMA_CFG_DST_DATA_WIDTH(ret);
+
+	return promise;
+
+fail:
+	kfree(promise);
+	return NULL;
+}
+
+/*
+ * Generate a contract
+ *
+ * Contracts function as DMA descriptors. As our hardware does not support
+ * linked lists, we need to implement SG via software. We use a contract
+ * to hold all the pieces of the request and process them serially one
+ * after another. Each piece is represented as a promise.
+ */
+static struct sun4i_dma_contract *generate_dma_contract(void)
+{
+	struct sun4i_dma_contract *contract;
+
+	contract = kzalloc(sizeof(*contract), GFP_NOWAIT);
+	if (!contract)
+		return NULL;
+
+	INIT_LIST_HEAD(&contract->demands);
+	INIT_LIST_HEAD(&contract->completed_demands);
+
+	return contract;
+}
+
+/*
+ * Get next promise on a cyclic transfer
+ *
+ * Cyclic contracts contain a series of promises which are executed on a
+ * loop. This function returns the next promise from a cyclic contract,
+ * so it can be programmed into the hardware.
+ */
+static struct sun4i_dma_promise *
+get_next_cyclic_promise(struct sun4i_dma_contract *contract)
+{
+	struct sun4i_dma_promise *promise;
+
+	promise = list_first_entry_or_null(&contract->demands,
+					   struct sun4i_dma_promise, list);
+	if (!promise) {
+		list_splice_init(&contract->completed_demands,
+				 &contract->demands);
+		promise = list_first_entry(&contract->demands,
+					   struct sun4i_dma_promise, list);
+	}
+
+	return promise;
+}
+
+/*
+ * Free a contract and all its associated promises
+ */
+static void sun4i_dma_free_contract(struct virt_dma_desc *vd)
+{
+	struct sun4i_dma_contract *contract = to_sun4i_dma_contract(vd);
+	struct sun4i_dma_promise *promise, *tmp;
+
+	/* Free all the demands and completed demands */
+	list_for_each_entry_safe(promise, tmp, &contract->demands, list)
+		kfree(promise);
+
+	list_for_each_entry_safe(promise, tmp, &contract->completed_demands, list)
+		kfree(promise);
+
+	kfree(contract);
+}
+
+static struct dma_async_tx_descriptor *
+sun4i_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest,
+			  dma_addr_t src, size_t len, unsigned long flags)
+{
+	struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan);
+	struct dma_slave_config *sconfig = &vchan->cfg;
+	struct sun4i_dma_promise *promise;
+	struct sun4i_dma_contract *contract;
+
+	contract = generate_dma_contract();
+	if (!contract)
+		return NULL;
+
+	/*
+	 * We can only do the copy to bus aligned addresses, so
+	 * choose the best one so we get decent performance. We also
+	 * maximize the burst size for this same reason.
+	 */
+	sconfig->src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	sconfig->dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	sconfig->src_maxburst = 8;
+	sconfig->dst_maxburst = 8;
+
+	if (vchan->is_dedicated)
+		promise = generate_ddma_promise(chan, src, dest, len, sconfig);
+	else
+		promise = generate_ndma_promise(chan, src, dest, len, sconfig,
+						DMA_MEM_TO_MEM);
+
+	if (!promise) {
+		kfree(contract);
+		return NULL;
+	}
+
+	/* Configure memcpy mode */
+	if (vchan->is_dedicated) {
+		promise->cfg |= SUN4I_DMA_CFG_SRC_DRQ_TYPE(SUN4I_DDMA_DRQ_TYPE_SDRAM) |
+				SUN4I_DMA_CFG_DST_DRQ_TYPE(SUN4I_DDMA_DRQ_TYPE_SDRAM);
+	} else {
+		promise->cfg |= SUN4I_DMA_CFG_SRC_DRQ_TYPE(SUN4I_NDMA_DRQ_TYPE_SDRAM) |
+				SUN4I_DMA_CFG_DST_DRQ_TYPE(SUN4I_NDMA_DRQ_TYPE_SDRAM);
+	}
+
+	/* Fill the contract with our only promise */
+	list_add_tail(&promise->list, &contract->demands);
+
+	/* And add it to the vchan */
+	return vchan_tx_prep(&vchan->vc, &contract->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *
+sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len,
+			  size_t period_len, enum dma_transfer_direction dir,
+			  unsigned long flags)
+{
+	struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan);
+	struct dma_slave_config *sconfig = &vchan->cfg;
+	struct sun4i_dma_promise *promise;
+	struct sun4i_dma_contract *contract;
+	dma_addr_t src, dest;
+	u32 endpoints;
+	int nr_periods, offset, plength, i;
+	u8 ram_type, io_mode, linear_mode;
+
+	if (!is_slave_direction(dir)) {
+		dev_err(chan2dev(chan), "Invalid DMA direction\n");
+		return NULL;
+	}
+
+	contract = generate_dma_contract();
+	if (!contract)
+		return NULL;
+
+	contract->is_cyclic = 1;
+
+	if (vchan->is_dedicated) {
+		io_mode = SUN4I_DDMA_ADDR_MODE_IO;
+		linear_mode = SUN4I_DDMA_ADDR_MODE_LINEAR;
+		ram_type = SUN4I_DDMA_DRQ_TYPE_SDRAM;
+	} else {
+		io_mode = SUN4I_NDMA_ADDR_MODE_IO;
+		linear_mode = SUN4I_NDMA_ADDR_MODE_LINEAR;
+		ram_type = SUN4I_NDMA_DRQ_TYPE_SDRAM;
+	}
+
+	if (dir == DMA_MEM_TO_DEV) {
+		src = buf;
+		dest = sconfig->dst_addr;
+		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(vchan->endpoint) |
+			    SUN4I_DMA_CFG_DST_ADDR_MODE(io_mode) |
+			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type) |
+			    SUN4I_DMA_CFG_SRC_ADDR_MODE(linear_mode);
+	} else {
+		src = sconfig->src_addr;
+		dest = buf;
+		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(ram_type) |
+			    SUN4I_DMA_CFG_DST_ADDR_MODE(linear_mode) |
+			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) |
+			    SUN4I_DMA_CFG_SRC_ADDR_MODE(io_mode);
+	}
+
+	/*
+	 * We will be using half done interrupts to make two periods
+	 * out of a promise, so we need to program the DMA engine less
+	 * often
+	 */
+
+	/*
+	 * The engine can interrupt on half-transfer, so we can use
+	 * this feature to program the engine half as often as if we
+	 * didn't use it (keep in mind the hardware doesn't support
+	 * linked lists).
+	 *
+	 * Say you have a set of periods (| marks the start/end, I for
+	 * interrupt, P for programming the engine to do a new
+	 * transfer), the easy but slow way would be to do
+	 *
+	 *  |---|---|---|---| (periods / promises)
+	 *  P  I,P I,P I,P  I
+	 *
+	 * Using half transfer interrupts you can do
+	 *
+	 *  |-------|-------| (promises as configured on hw)
+	 *  |---|---|---|---| (periods)
+	 *  P   I  I,P  I   I
+	 *
+	 * Which requires half the engine programming for the same
+	 * functionality.
+	 *
+	 * This only works if two periods fit in a single promise. That will
+	 * always be the case for dedicated DMA, where the hardware has a much
+	 * larger maximum transfer size than advertised to clients.
+	 */
+	if (vchan->is_dedicated || period_len <= SUN4I_NDMA_MAX_SEG_SIZE / 2) {
+		period_len *= 2;
+		contract->use_half_int = 1;
+	}
+
+	nr_periods = DIV_ROUND_UP(len, period_len);
+	for (i = 0; i < nr_periods; i++) {
+		/* Calculate the offset in the buffer and the length needed */
+		offset = i * period_len;
+		plength = min((len - offset), period_len);
+		if (dir == DMA_MEM_TO_DEV)
+			src = buf + offset;
+		else
+			dest = buf + offset;
+
+		/* Make the promise */
+		if (vchan->is_dedicated)
+			promise = generate_ddma_promise(chan, src, dest,
+							plength, sconfig);
+		else
+			promise = generate_ndma_promise(chan, src, dest,
+							plength, sconfig, dir);
+
+		if (!promise) {
+			/* TODO: should we free everything? */
+			return NULL;
+		}
+		promise->cfg |= endpoints;
+
+		/* Then add it to the contract */
+		list_add_tail(&promise->list, &contract->demands);
+	}
+
+	/* And add it to the vchan */
+	return vchan_tx_prep(&vchan->vc, &contract->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *
+sun4i_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+			unsigned int sg_len, enum dma_transfer_direction dir,
+			unsigned long flags, void *context)
+{
+	struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan);
+	struct dma_slave_config *sconfig = &vchan->cfg;
+	struct sun4i_dma_promise *promise;
+	struct sun4i_dma_contract *contract;
+	u8 ram_type, io_mode, linear_mode;
+	struct scatterlist *sg;
+	dma_addr_t srcaddr, dstaddr;
+	u32 endpoints, para;
+	int i;
+
+	if (!sgl)
+		return NULL;
+
+	if (!is_slave_direction(dir)) {
+		dev_err(chan2dev(chan), "Invalid DMA direction\n");
+		return NULL;
+	}
+
+	contract = generate_dma_contract();
+	if (!contract)
+		return NULL;
+
+	if (vchan->is_dedicated) {
+		io_mode = SUN4I_DDMA_ADDR_MODE_IO;
+		linear_mode = SUN4I_DDMA_ADDR_MODE_LINEAR;
+		ram_type = SUN4I_DDMA_DRQ_TYPE_SDRAM;
+	} else {
+		io_mode = SUN4I_NDMA_ADDR_MODE_IO;
+		linear_mode = SUN4I_NDMA_ADDR_MODE_LINEAR;
+		ram_type = SUN4I_NDMA_DRQ_TYPE_SDRAM;
+	}
+
+	if (dir == DMA_MEM_TO_DEV)
+		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(vchan->endpoint) |
+			    SUN4I_DMA_CFG_DST_ADDR_MODE(io_mode) |
+			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type) |
+			    SUN4I_DMA_CFG_SRC_ADDR_MODE(linear_mode);
+	else
+		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(ram_type) |
+			    SUN4I_DMA_CFG_DST_ADDR_MODE(linear_mode) |
+			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) |
+			    SUN4I_DMA_CFG_SRC_ADDR_MODE(io_mode);
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		/* Figure out addresses */
+		if (dir == DMA_MEM_TO_DEV) {
+			srcaddr = sg_dma_address(sg);
+			dstaddr = sconfig->dst_addr;
+		} else {
+			srcaddr = sconfig->src_addr;
+			dstaddr = sg_dma_address(sg);
+		}
+
+		/*
+		 * These are the magic DMA engine timings that keep SPI going.
+		 * I haven't seen any interface on DMAEngine to configure
+		 * timings, and so far they seem to work for everything we
+		 * support, so I've kept them here. I don't know if other
+		 * devices need different timings because, as usual, we only
+		 * have the "para" bitfield meanings, but no comment on what
+		 * the values should be when doing a certain operation :|
+		 */
+		para = SUN4I_DDMA_MAGIC_SPI_PARAMETERS;
+
+		/* And make a suitable promise */
+		if (vchan->is_dedicated)
+			promise = generate_ddma_promise(chan, srcaddr, dstaddr,
+							sg_dma_len(sg),
+							sconfig);
+		else
+			promise = generate_ndma_promise(chan, srcaddr, dstaddr,
+							sg_dma_len(sg),
+							sconfig, dir);
+
+		if (!promise)
+			return NULL; /* TODO: should we free everything? */
+
+		promise->cfg |= endpoints;
+		promise->para = para;
+
+		/* Then add it to the contract */
+		list_add_tail(&promise->list, &contract->demands);
+	}
+
+	/*
+	 * Once we've got all the promises ready, add the contract
+	 * to the pending list on the vchan
+	 */
+	return vchan_tx_prep(&vchan->vc, &contract->vd, flags);
+}
+
+static int sun4i_dma_terminate_all(struct dma_chan *chan)
+{
+	struct sun4i_dma_dev *priv = to_sun4i_dma_dev(chan->device);
+	struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan);
+	struct sun4i_dma_pchan *pchan = vchan->pchan;
+	LIST_HEAD(head);
+	unsigned long flags;
+
+	spin_lock_irqsave(&vchan->vc.lock, flags);
+	vchan_get_all_descriptors(&vchan->vc, &head);
+	spin_unlock_irqrestore(&vchan->vc.lock, flags);
+
+	/*
+	 * Clearing the configuration register will halt the pchan. Interrupts
+	 * may still trigger, so don't forget to disable them.
+	 */
+	if (pchan) {
+		if (pchan->is_dedicated)
+			writel(0, pchan->base + SUN4I_DDMA_CFG_REG);
+		else
+			writel(0, pchan->base + SUN4I_NDMA_CFG_REG);
+		set_pchan_interrupt(priv, pchan, 0, 0);
+		release_pchan(priv, pchan);
+	}
+
+	spin_lock_irqsave(&vchan->vc.lock, flags);
+	/* Clear these so the vchan is usable again */
+	vchan->processing = NULL;
+	vchan->pchan = NULL;
+	spin_unlock_irqrestore(&vchan->vc.lock, flags);
+
+	vchan_dma_desc_free_list(&vchan->vc, &head);
+
+	return 0;
+}
+
+static int sun4i_dma_config(struct dma_chan *chan,
+			    struct dma_slave_config *config)
+{
+	struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan);
+
+	memcpy(&vchan->cfg, config, sizeof(*config));
+
+	return 0;
+}
+
+static struct dma_chan *sun4i_dma_of_xlate(struct of_phandle_args *dma_spec,
+					   struct of_dma *ofdma)
+{
+	struct sun4i_dma_dev *priv = ofdma->of_dma_data;
+	struct sun4i_dma_vchan *vchan;
+	struct dma_chan *chan;
+	u8 is_dedicated = dma_spec->args[0];
+	u8 endpoint = dma_spec->args[1];
+
+	/* Check if type is Normal or Dedicated */
+	if (is_dedicated != 0 && is_dedicated != 1)
+		return NULL;
+
+	/* Make sure the endpoint looks sane */
+	if ((is_dedicated && endpoint >= SUN4I_DDMA_DRQ_TYPE_LIMIT) ||
+	    (!is_dedicated && endpoint >= SUN4I_NDMA_DRQ_TYPE_LIMIT))
+		return NULL;
+
+	chan = dma_get_any_slave_channel(&priv->slave);
+	if (!chan)
+		return NULL;
+
+	/* Assign the endpoint to the vchan */
+	vchan = to_sun4i_dma_vchan(chan);
+	vchan->is_dedicated = is_dedicated;
+	vchan->endpoint = endpoint;
+
+	return chan;
+}
+
+static enum dma_status sun4i_dma_tx_status(struct dma_chan *chan,
+					   dma_cookie_t cookie,
+					   struct dma_tx_state *state)
+{
+	struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan);
+	struct sun4i_dma_pchan *pchan = vchan->pchan;
+	struct sun4i_dma_contract *contract;
+	struct sun4i_dma_promise *promise;
+	struct virt_dma_desc *vd;
+	unsigned long flags;
+	enum dma_status ret;
+	size_t bytes = 0;
+
+	ret = dma_cookie_status(chan, cookie, state);
+	if (!state || (ret == DMA_COMPLETE))
+		return ret;
+
+	spin_lock_irqsave(&vchan->vc.lock, flags);
+	vd = vchan_find_desc(&vchan->vc, cookie);
+	if (!vd)
+		goto exit;
+	contract = to_sun4i_dma_contract(vd);
+
+	list_for_each_entry(promise, &contract->demands, list)
+		bytes += promise->len;
+
+	/*
+	 * The hardware is configured to return the remaining byte
+	 * quantity. If possible, replace the first listed element's
+	 * full size with the actual remaining amount
+	 */
+	promise = list_first_entry_or_null(&contract->demands,
+					   struct sun4i_dma_promise, list);
+	if (promise && pchan) {
+		bytes -= promise->len;
+		if (pchan->is_dedicated)
+			bytes += readl(pchan->base + SUN4I_DDMA_BYTE_COUNT_REG);
+		else
+			bytes += readl(pchan->base + SUN4I_NDMA_BYTE_COUNT_REG);
+	}
+
+exit:
+
+	dma_set_residue(state, bytes);
+	spin_unlock_irqrestore(&vchan->vc.lock, flags);
+
+	return ret;
+}
+
+static void sun4i_dma_issue_pending(struct dma_chan *chan)
+{
+	struct sun4i_dma_dev *priv = to_sun4i_dma_dev(chan->device);
+	struct sun4i_dma_vchan *vchan = to_sun4i_dma_vchan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&vchan->vc.lock, flags);
+
+	/*
+	 * If there are pending transactions for this vchan, push one of
+	 * them into the engine to get the ball rolling.
+	 */
+	if (vchan_issue_pending(&vchan->vc))
+		__execute_vchan_pending(priv, vchan);
+
+	spin_unlock_irqrestore(&vchan->vc.lock, flags);
+}
+
+static irqreturn_t sun4i_dma_interrupt(int irq, void *dev_id)
+{
+	struct sun4i_dma_dev *priv = dev_id;
+	struct sun4i_dma_pchan *pchans = priv->pchans, *pchan;
+	struct sun4i_dma_vchan *vchan;
+	struct sun4i_dma_contract *contract;
+	struct sun4i_dma_promise *promise;
+	unsigned long pendirq, irqs, disableirqs;
+	int bit, i, free_room, allow_mitigation = 1;
+
+	pendirq = readl_relaxed(priv->base + SUN4I_DMA_IRQ_PENDING_STATUS_REG);
+
+handle_pending:
+
+	disableirqs = 0;
+	free_room = 0;
+
+	for_each_set_bit(bit, &pendirq, 32) {
+		pchan = &pchans[bit >> 1];
+		vchan = pchan->vchan;
+		if (!vchan) /* a terminated channel may still interrupt */
+			continue;
+		contract = vchan->contract;
+
+		/*
+		 * Disable the IRQ and free the pchan if it's an end
+		 * interrupt (odd bit)
+		 */
+		if (bit & 1) {
+			spin_lock(&vchan->vc.lock);
+
+			/*
+			 * Move the promise into the completed list now that
+			 * we're done with it
+			 */
+			list_move_tail(&vchan->processing->list,
+				       &contract->completed_demands);
+
+			/*
+			 * Cyclic DMA transfers are special:
+			 * - There's always something we can dispatch
+			 * - We need to run the callback
+			 * - Latency is very important, as this is used by audio
+			 * We therefore just cycle through the list and dispatch
+			 * whatever we have here, reusing the pchan. There's
+			 * no need to run the thread after this.
+			 *
+			 * For non-cyclic transfers we need to look around,
+			 * so we can program some more work, or notify the
+			 * client that their transfers have been completed.
+			 */
+			if (contract->is_cyclic) {
+				promise = get_next_cyclic_promise(contract);
+				vchan->processing = promise;
+				configure_pchan(pchan, promise);
+				vchan_cyclic_callback(&contract->vd);
+			} else {
+				vchan->processing = NULL;
+				vchan->pchan = NULL;
+
+				free_room = 1;
+				disableirqs |= BIT(bit);
+				release_pchan(priv, pchan);
+			}
+
+			spin_unlock(&vchan->vc.lock);
+		} else {
+			/* Half done interrupt */
+			if (contract->is_cyclic)
+				vchan_cyclic_callback(&contract->vd);
+			else
+				disableirqs |= BIT(bit);
+		}
+	}
+
+	/* Disable the IRQs for events we handled */
+	spin_lock(&priv->lock);
+	irqs = readl_relaxed(priv->base + SUN4I_DMA_IRQ_ENABLE_REG);
+	writel_relaxed(irqs & ~disableirqs,
+		       priv->base + SUN4I_DMA_IRQ_ENABLE_REG);
+	spin_unlock(&priv->lock);
+
+	/* Writing 1 to the pending field will clear the pending interrupt */
+	writel_relaxed(pendirq, priv->base + SUN4I_DMA_IRQ_PENDING_STATUS_REG);
+
+	/*
+	 * If a pchan was freed, we may be able to schedule something else,
+	 * so have a look around
+	 */
+	if (free_room) {
+		for (i = 0; i < SUN4I_DMA_NR_MAX_VCHANS; i++) {
+			vchan = &priv->vchans[i];
+			spin_lock(&vchan->vc.lock);
+			__execute_vchan_pending(priv, vchan);
+			spin_unlock(&vchan->vc.lock);
+		}
+	}
+
+	/*
+	 * Handle newer interrupts if some showed up, but only do it once
+	 * to avoid a too long a loop
+	 */
+	if (allow_mitigation) {
+		pendirq = readl_relaxed(priv->base +
+					SUN4I_DMA_IRQ_PENDING_STATUS_REG);
+		if (pendirq) {
+			allow_mitigation = 0;
+			goto handle_pending;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int sun4i_dma_probe(struct platform_device *pdev)
+{
+	struct sun4i_dma_dev *priv;
+	struct resource *res;
+	int i, j, ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "No clock specified\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	platform_set_drvdata(pdev, priv);
+	spin_lock_init(&priv->lock);
+
+	dma_set_max_seg_size(&pdev->dev, SUN4I_DMA_MAX_SEG_SIZE);
+
+	dma_cap_zero(priv->slave.cap_mask);
+	dma_cap_set(DMA_PRIVATE, priv->slave.cap_mask);
+	dma_cap_set(DMA_MEMCPY, priv->slave.cap_mask);
+	dma_cap_set(DMA_CYCLIC, priv->slave.cap_mask);
+	dma_cap_set(DMA_SLAVE, priv->slave.cap_mask);
+
+	INIT_LIST_HEAD(&priv->slave.channels);
+	priv->slave.device_free_chan_resources	= sun4i_dma_free_chan_resources;
+	priv->slave.device_tx_status		= sun4i_dma_tx_status;
+	priv->slave.device_issue_pending	= sun4i_dma_issue_pending;
+	priv->slave.device_prep_slave_sg	= sun4i_dma_prep_slave_sg;
+	priv->slave.device_prep_dma_memcpy	= sun4i_dma_prep_dma_memcpy;
+	priv->slave.device_prep_dma_cyclic	= sun4i_dma_prep_dma_cyclic;
+	priv->slave.device_config		= sun4i_dma_config;
+	priv->slave.device_terminate_all	= sun4i_dma_terminate_all;
+	priv->slave.copy_align			= 2;
+	priv->slave.src_addr_widths		= BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+						  BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+						  BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	priv->slave.dst_addr_widths		= BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+						  BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+						  BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	priv->slave.directions			= BIT(DMA_DEV_TO_MEM) |
+						  BIT(DMA_MEM_TO_DEV);
+	priv->slave.residue_granularity		= DMA_RESIDUE_GRANULARITY_BURST;
+
+	priv->slave.dev = &pdev->dev;
+
+	priv->pchans = devm_kcalloc(&pdev->dev, SUN4I_DMA_NR_MAX_CHANNELS,
+				    sizeof(struct sun4i_dma_pchan), GFP_KERNEL);
+	priv->vchans = devm_kcalloc(&pdev->dev, SUN4I_DMA_NR_MAX_VCHANS,
+				    sizeof(struct sun4i_dma_vchan), GFP_KERNEL);
+	if (!priv->vchans || !priv->pchans)
+		return -ENOMEM;
+
+	/*
+	 * [0..SUN4I_NDMA_NR_MAX_CHANNELS) are normal pchans, and
+	 * [SUN4I_NDMA_NR_MAX_CHANNELS..SUN4I_DMA_NR_MAX_CHANNELS) are
+	 * dedicated ones
+	 */
+	for (i = 0; i < SUN4I_NDMA_NR_MAX_CHANNELS; i++)
+		priv->pchans[i].base = priv->base +
+			SUN4I_NDMA_CHANNEL_REG_BASE(i);
+
+	for (j = 0; i < SUN4I_DMA_NR_MAX_CHANNELS; i++, j++) {
+		priv->pchans[i].base = priv->base +
+			SUN4I_DDMA_CHANNEL_REG_BASE(j);
+		priv->pchans[i].is_dedicated = 1;
+	}
+
+	for (i = 0; i < SUN4I_DMA_NR_MAX_VCHANS; i++) {
+		struct sun4i_dma_vchan *vchan = &priv->vchans[i];
+
+		spin_lock_init(&vchan->vc.lock);
+		vchan->vc.desc_free = sun4i_dma_free_contract;
+		vchan_init(&vchan->vc, &priv->slave);
+	}
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't enable the clock\n");
+		return ret;
+	}
+
+	/*
+	 * Make sure the IRQs are all disabled and accounted for. The bootloader
+	 * likes to leave these dirty
+	 */
+	writel(0, priv->base + SUN4I_DMA_IRQ_ENABLE_REG);
+	writel(0xFFFFFFFF, priv->base + SUN4I_DMA_IRQ_PENDING_STATUS_REG);
+
+	ret = devm_request_irq(&pdev->dev, priv->irq, sun4i_dma_interrupt,
+			       0, dev_name(&pdev->dev), priv);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot request IRQ\n");
+		goto err_clk_disable;
+	}
+
+	ret = dma_async_device_register(&priv->slave);
+	if (ret) {
+		dev_warn(&pdev->dev, "Failed to register DMA engine device\n");
+		goto err_clk_disable;
+	}
+
+	ret = of_dma_controller_register(pdev->dev.of_node, sun4i_dma_of_xlate,
+					 priv);
+	if (ret) {
+		dev_err(&pdev->dev, "of_dma_controller_register failed\n");
+		goto err_dma_unregister;
+	}
+
+	dev_dbg(&pdev->dev, "Successfully probed SUN4I_DMA\n");
+
+	return 0;
+
+err_dma_unregister:
+	dma_async_device_unregister(&priv->slave);
+err_clk_disable:
+	clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int sun4i_dma_remove(struct platform_device *pdev)
+{
+	struct sun4i_dma_dev *priv = platform_get_drvdata(pdev);
+
+	/* Disable IRQ so no more work is scheduled */
+	disable_irq(priv->irq);
+
+	of_dma_controller_free(pdev->dev.of_node);
+	dma_async_device_unregister(&priv->slave);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static const struct of_device_id sun4i_dma_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-dma" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sun4i_dma_match);
+
+static struct platform_driver sun4i_dma_driver = {
+	.probe	= sun4i_dma_probe,
+	.remove	= sun4i_dma_remove,
+	.driver	= {
+		.name		= "sun4i-dma",
+		.of_match_table	= sun4i_dma_match,
+	},
+};
+
+module_platform_driver(sun4i_dma_driver);
+
+MODULE_DESCRIPTION("Allwinner A10 Dedicated DMA Controller Driver");
+MODULE_AUTHOR("Emilio López <emilio@elopez.com.ar>");
+MODULE_LICENSE("GPL");