Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1227 insertions, 0 deletions

diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
new file mode 100644
index 000000000..61a27dd73
--- /dev/null
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -0,0 +1,1227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * DMM IOMMU driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ * Author: Rob Clark <rob@ti.com>
+ *         Andy Gross <andy.gross@ti.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h> /* platform_device() */
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+
+#include "omap_dmm_tiler.h"
+#include "omap_dmm_priv.h"
+
+#define DMM_DRIVER_NAME "dmm"
+
+/* mappings for associating views to luts */
+static struct tcm *containers[TILFMT_NFORMATS];
+static struct dmm *omap_dmm;
+
+#if defined(CONFIG_OF)
+static const struct of_device_id dmm_of_match[];
+#endif
+
+/* global spinlock for protecting lists */
+static DEFINE_SPINLOCK(list_lock);
+
+/* Geometry table */
+#define GEOM(xshift, yshift, bytes_per_pixel) { \
+		.x_shft = (xshift), \
+		.y_shft = (yshift), \
+		.cpp    = (bytes_per_pixel), \
+		.slot_w = 1 << (SLOT_WIDTH_BITS - (xshift)), \
+		.slot_h = 1 << (SLOT_HEIGHT_BITS - (yshift)), \
+	}
+
+static const struct {
+	u32 x_shft;	/* unused X-bits (as part of bpp) */
+	u32 y_shft;	/* unused Y-bits (as part of bpp) */
+	u32 cpp;		/* bytes/chars per pixel */
+	u32 slot_w;	/* width of each slot (in pixels) */
+	u32 slot_h;	/* height of each slot (in pixels) */
+} geom[TILFMT_NFORMATS] = {
+	[TILFMT_8BIT]  = GEOM(0, 0, 1),
+	[TILFMT_16BIT] = GEOM(0, 1, 2),
+	[TILFMT_32BIT] = GEOM(1, 1, 4),
+	[TILFMT_PAGE]  = GEOM(SLOT_WIDTH_BITS, SLOT_HEIGHT_BITS, 1),
+};
+
+
+/* lookup table for registers w/ per-engine instances */
+static const u32 reg[][4] = {
+	[PAT_STATUS] = {DMM_PAT_STATUS__0, DMM_PAT_STATUS__1,
+			DMM_PAT_STATUS__2, DMM_PAT_STATUS__3},
+	[PAT_DESCR]  = {DMM_PAT_DESCR__0, DMM_PAT_DESCR__1,
+			DMM_PAT_DESCR__2, DMM_PAT_DESCR__3},
+};
+
+static int dmm_dma_copy(struct dmm *dmm, dma_addr_t src, dma_addr_t dst)
+{
+	struct dma_async_tx_descriptor *tx;
+	enum dma_status status;
+	dma_cookie_t cookie;
+
+	tx = dmaengine_prep_dma_memcpy(dmm->wa_dma_chan, dst, src, 4, 0);
+	if (!tx) {
+		dev_err(dmm->dev, "Failed to prepare DMA memcpy\n");
+		return -EIO;
+	}
+
+	cookie = tx->tx_submit(tx);
+	if (dma_submit_error(cookie)) {
+		dev_err(dmm->dev, "Failed to do DMA tx_submit\n");
+		return -EIO;
+	}
+
+	status = dma_sync_wait(dmm->wa_dma_chan, cookie);
+	if (status != DMA_COMPLETE)
+		dev_err(dmm->dev, "i878 wa DMA copy failure\n");
+
+	dmaengine_terminate_all(dmm->wa_dma_chan);
+	return 0;
+}
+
+static u32 dmm_read_wa(struct dmm *dmm, u32 reg)
+{
+	dma_addr_t src, dst;
+	int r;
+
+	src = dmm->phys_base + reg;
+	dst = dmm->wa_dma_handle;
+
+	r = dmm_dma_copy(dmm, src, dst);
+	if (r) {
+		dev_err(dmm->dev, "sDMA read transfer timeout\n");
+		return readl(dmm->base + reg);
+	}
+
+	/*
+	 * As per i878 workaround, the DMA is used to access the DMM registers.
+	 * Make sure that the readl is not moved by the compiler or the CPU
+	 * earlier than the DMA finished writing the value to memory.
+	 */
+	rmb();
+	return readl(dmm->wa_dma_data);
+}
+
+static void dmm_write_wa(struct dmm *dmm, u32 val, u32 reg)
+{
+	dma_addr_t src, dst;
+	int r;
+
+	writel(val, dmm->wa_dma_data);
+	/*
+	 * As per i878 workaround, the DMA is used to access the DMM registers.
+	 * Make sure that the writel is not moved by the compiler or the CPU, so
+	 * the data will be in place before we start the DMA to do the actual
+	 * register write.
+	 */
+	wmb();
+
+	src = dmm->wa_dma_handle;
+	dst = dmm->phys_base + reg;
+
+	r = dmm_dma_copy(dmm, src, dst);
+	if (r) {
+		dev_err(dmm->dev, "sDMA write transfer timeout\n");
+		writel(val, dmm->base + reg);
+	}
+}
+
+static u32 dmm_read(struct dmm *dmm, u32 reg)
+{
+	if (dmm->dmm_workaround) {
+		u32 v;
+		unsigned long flags;
+
+		spin_lock_irqsave(&dmm->wa_lock, flags);
+		v = dmm_read_wa(dmm, reg);
+		spin_unlock_irqrestore(&dmm->wa_lock, flags);
+
+		return v;
+	} else {
+		return readl(dmm->base + reg);
+	}
+}
+
+static void dmm_write(struct dmm *dmm, u32 val, u32 reg)
+{
+	if (dmm->dmm_workaround) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&dmm->wa_lock, flags);
+		dmm_write_wa(dmm, val, reg);
+		spin_unlock_irqrestore(&dmm->wa_lock, flags);
+	} else {
+		writel(val, dmm->base + reg);
+	}
+}
+
+static int dmm_workaround_init(struct dmm *dmm)
+{
+	dma_cap_mask_t mask;
+
+	spin_lock_init(&dmm->wa_lock);
+
+	dmm->wa_dma_data = dma_alloc_coherent(dmm->dev,  sizeof(u32),
+					      &dmm->wa_dma_handle, GFP_KERNEL);
+	if (!dmm->wa_dma_data)
+		return -ENOMEM;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_MEMCPY, mask);
+
+	dmm->wa_dma_chan = dma_request_channel(mask, NULL, NULL);
+	if (!dmm->wa_dma_chan) {
+		dma_free_coherent(dmm->dev, 4, dmm->wa_dma_data, dmm->wa_dma_handle);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void dmm_workaround_uninit(struct dmm *dmm)
+{
+	dma_release_channel(dmm->wa_dma_chan);
+
+	dma_free_coherent(dmm->dev, 4, dmm->wa_dma_data, dmm->wa_dma_handle);
+}
+
+/* simple allocator to grab next 16 byte aligned memory from txn */
+static void *alloc_dma(struct dmm_txn *txn, size_t sz, dma_addr_t *pa)
+{
+	void *ptr;
+	struct refill_engine *engine = txn->engine_handle;
+
+	/* dmm programming requires 16 byte aligned addresses */
+	txn->current_pa = round_up(txn->current_pa, 16);
+	txn->current_va = (void *)round_up((long)txn->current_va, 16);
+
+	ptr = txn->current_va;
+	*pa = txn->current_pa;
+
+	txn->current_pa += sz;
+	txn->current_va += sz;
+
+	BUG_ON((txn->current_va - engine->refill_va) > REFILL_BUFFER_SIZE);
+
+	return ptr;
+}
+
+/* check status and spin until wait_mask comes true */
+static int wait_status(struct refill_engine *engine, u32 wait_mask)
+{
+	struct dmm *dmm = engine->dmm;
+	u32 r = 0, err, i;
+
+	i = DMM_FIXED_RETRY_COUNT;
+	while (true) {
+		r = dmm_read(dmm, reg[PAT_STATUS][engine->id]);
+		err = r & DMM_PATSTATUS_ERR;
+		if (err) {
+			dev_err(dmm->dev,
+				"%s: error (engine%d). PAT_STATUS: 0x%08x\n",
+				__func__, engine->id, r);
+			return -EFAULT;
+		}
+
+		if ((r & wait_mask) == wait_mask)
+			break;
+
+		if (--i == 0) {
+			dev_err(dmm->dev,
+				"%s: timeout (engine%d). PAT_STATUS: 0x%08x\n",
+				__func__, engine->id, r);
+			return -ETIMEDOUT;
+		}
+
+		udelay(1);
+	}
+
+	return 0;
+}
+
+static void release_engine(struct refill_engine *engine)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&list_lock, flags);
+	list_add(&engine->idle_node, &omap_dmm->idle_head);
+	spin_unlock_irqrestore(&list_lock, flags);
+
+	atomic_inc(&omap_dmm->engine_counter);
+	wake_up_interruptible(&omap_dmm->engine_queue);
+}
+
+static irqreturn_t omap_dmm_irq_handler(int irq, void *arg)
+{
+	struct dmm *dmm = arg;
+	u32 status = dmm_read(dmm, DMM_PAT_IRQSTATUS);
+	int i;
+
+	/* ack IRQ */
+	dmm_write(dmm, status, DMM_PAT_IRQSTATUS);
+
+	for (i = 0; i < dmm->num_engines; i++) {
+		if (status & DMM_IRQSTAT_ERR_MASK)
+			dev_err(dmm->dev,
+				"irq error(engine%d): IRQSTAT 0x%02x\n",
+				i, status & 0xff);
+
+		if (status & DMM_IRQSTAT_LST) {
+			if (dmm->engines[i].async)
+				release_engine(&dmm->engines[i]);
+
+			complete(&dmm->engines[i].compl);
+		}
+
+		status >>= 8;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Get a handle for a DMM transaction
+ */
+static struct dmm_txn *dmm_txn_init(struct dmm *dmm, struct tcm *tcm)
+{
+	struct dmm_txn *txn = NULL;
+	struct refill_engine *engine = NULL;
+	int ret;
+	unsigned long flags;
+
+
+	/* wait until an engine is available */
+	ret = wait_event_interruptible(omap_dmm->engine_queue,
+		atomic_add_unless(&omap_dmm->engine_counter, -1, 0));
+	if (ret)
+		return ERR_PTR(ret);
+
+	/* grab an idle engine */
+	spin_lock_irqsave(&list_lock, flags);
+	if (!list_empty(&dmm->idle_head)) {
+		engine = list_entry(dmm->idle_head.next, struct refill_engine,
+					idle_node);
+		list_del(&engine->idle_node);
+	}
+	spin_unlock_irqrestore(&list_lock, flags);
+
+	BUG_ON(!engine);
+
+	txn = &engine->txn;
+	engine->tcm = tcm;
+	txn->engine_handle = engine;
+	txn->last_pat = NULL;
+	txn->current_va = engine->refill_va;
+	txn->current_pa = engine->refill_pa;
+
+	return txn;
+}
+
+/*
+ * Add region to DMM transaction.  If pages or pages[i] is NULL, then the
+ * corresponding slot is cleared (ie. dummy_pa is programmed)
+ */
+static void dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
+		struct page **pages, u32 npages, u32 roll)
+{
+	dma_addr_t pat_pa = 0, data_pa = 0;
+	u32 *data;
+	struct pat *pat;
+	struct refill_engine *engine = txn->engine_handle;
+	int columns = (1 + area->x1 - area->x0);
+	int rows = (1 + area->y1 - area->y0);
+	int i = columns*rows;
+
+	pat = alloc_dma(txn, sizeof(*pat), &pat_pa);
+
+	if (txn->last_pat)
+		txn->last_pat->next_pa = (u32)pat_pa;
+
+	pat->area = *area;
+
+	/* adjust Y coordinates based off of container parameters */
+	pat->area.y0 += engine->tcm->y_offset;
+	pat->area.y1 += engine->tcm->y_offset;
+
+	pat->ctrl = (struct pat_ctrl){
+			.start = 1,
+			.lut_id = engine->tcm->lut_id,
+		};
+
+	data = alloc_dma(txn, 4*i, &data_pa);
+	/* FIXME: what if data_pa is more than 32-bit ? */
+	pat->data_pa = data_pa;
+
+	while (i--) {
+		int n = i + roll;
+		if (n >= npages)
+			n -= npages;
+		data[i] = (pages && pages[n]) ?
+			page_to_phys(pages[n]) : engine->dmm->dummy_pa;
+	}
+
+	txn->last_pat = pat;
+
+	return;
+}
+
+/*
+ * Commit the DMM transaction.
+ */
+static int dmm_txn_commit(struct dmm_txn *txn, bool wait)
+{
+	int ret = 0;
+	struct refill_engine *engine = txn->engine_handle;
+	struct dmm *dmm = engine->dmm;
+
+	if (!txn->last_pat) {
+		dev_err(engine->dmm->dev, "need at least one txn\n");
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	txn->last_pat->next_pa = 0;
+	/* ensure that the written descriptors are visible to DMM */
+	wmb();
+
+	/*
+	 * NOTE: the wmb() above should be enough, but there seems to be a bug
+	 * in OMAP's memory barrier implementation, which in some rare cases may
+	 * cause the writes not to be observable after wmb().
+	 */
+
+	/* read back to ensure the data is in RAM */
+	readl(&txn->last_pat->next_pa);
+
+	/* write to PAT_DESCR to clear out any pending transaction */
+	dmm_write(dmm, 0x0, reg[PAT_DESCR][engine->id]);
+
+	/* wait for engine ready: */
+	ret = wait_status(engine, DMM_PATSTATUS_READY);
+	if (ret) {
+		ret = -EFAULT;
+		goto cleanup;
+	}
+
+	/* mark whether it is async to denote list management in IRQ handler */
+	engine->async = wait ? false : true;
+	reinit_completion(&engine->compl);
+	/* verify that the irq handler sees the 'async' and completion value */
+	smp_mb();
+
+	/* kick reload */
+	dmm_write(dmm, engine->refill_pa, reg[PAT_DESCR][engine->id]);
+
+	if (wait) {
+		if (!wait_for_completion_timeout(&engine->compl,
+				msecs_to_jiffies(100))) {
+			dev_err(dmm->dev, "timed out waiting for done\n");
+			ret = -ETIMEDOUT;
+			goto cleanup;
+		}
+
+		/* Check the engine status before continue */
+		ret = wait_status(engine, DMM_PATSTATUS_READY |
+				  DMM_PATSTATUS_VALID | DMM_PATSTATUS_DONE);
+	}
+
+cleanup:
+	/* only place engine back on list if we are done with it */
+	if (ret || wait)
+		release_engine(engine);
+
+	return ret;
+}
+
+/*
+ * DMM programming
+ */
+static int fill(struct tcm_area *area, struct page **pages,
+		u32 npages, u32 roll, bool wait)
+{
+	int ret = 0;
+	struct tcm_area slice, area_s;
+	struct dmm_txn *txn;
+
+	/*
+	 * FIXME
+	 *
+	 * Asynchronous fill does not work reliably, as the driver does not
+	 * handle errors in the async code paths. The fill operation may
+	 * silently fail, leading to leaking DMM engines, which may eventually
+	 * lead to deadlock if we run out of DMM engines.
+	 *
+	 * For now, always set 'wait' so that we only use sync fills. Async
+	 * fills should be fixed, or alternatively we could decide to only
+	 * support sync fills and so the whole async code path could be removed.
+	 */
+
+	wait = true;
+
+	txn = dmm_txn_init(omap_dmm, area->tcm);
+	if (IS_ERR_OR_NULL(txn))
+		return -ENOMEM;
+
+	tcm_for_each_slice(slice, *area, area_s) {
+		struct pat_area p_area = {
+				.x0 = slice.p0.x,  .y0 = slice.p0.y,
+				.x1 = slice.p1.x,  .y1 = slice.p1.y,
+		};
+
+		dmm_txn_append(txn, &p_area, pages, npages, roll);
+
+		roll += tcm_sizeof(slice);
+	}
+
+	ret = dmm_txn_commit(txn, wait);
+
+	return ret;
+}
+
+/*
+ * Pin/unpin
+ */
+
+/* note: slots for which pages[i] == NULL are filled w/ dummy page
+ */
+int tiler_pin(struct tiler_block *block, struct page **pages,
+		u32 npages, u32 roll, bool wait)
+{
+	int ret;
+
+	ret = fill(&block->area, pages, npages, roll, wait);
+
+	if (ret)
+		tiler_unpin(block);
+
+	return ret;
+}
+
+int tiler_unpin(struct tiler_block *block)
+{
+	return fill(&block->area, NULL, 0, 0, false);
+}
+
+/*
+ * Reserve/release
+ */
+struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, u16 w,
+		u16 h, u16 align)
+{
+	struct tiler_block *block;
+	u32 min_align = 128;
+	int ret;
+	unsigned long flags;
+	u32 slot_bytes;
+
+	block = kzalloc(sizeof(*block), GFP_KERNEL);
+	if (!block)
+		return ERR_PTR(-ENOMEM);
+
+	BUG_ON(!validfmt(fmt));
+
+	/* convert width/height to slots */
+	w = DIV_ROUND_UP(w, geom[fmt].slot_w);
+	h = DIV_ROUND_UP(h, geom[fmt].slot_h);
+
+	/* convert alignment to slots */
+	slot_bytes = geom[fmt].slot_w * geom[fmt].cpp;
+	min_align = max(min_align, slot_bytes);
+	align = (align > min_align) ? ALIGN(align, min_align) : min_align;
+	align /= slot_bytes;
+
+	block->fmt = fmt;
+
+	ret = tcm_reserve_2d(containers[fmt], w, h, align, -1, slot_bytes,
+			&block->area);
+	if (ret) {
+		kfree(block);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* add to allocation list */
+	spin_lock_irqsave(&list_lock, flags);
+	list_add(&block->alloc_node, &omap_dmm->alloc_head);
+	spin_unlock_irqrestore(&list_lock, flags);
+
+	return block;
+}
+
+struct tiler_block *tiler_reserve_1d(size_t size)
+{
+	struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
+	int num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	unsigned long flags;
+
+	if (!block)
+		return ERR_PTR(-ENOMEM);
+
+	block->fmt = TILFMT_PAGE;
+
+	if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages,
+				&block->area)) {
+		kfree(block);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	spin_lock_irqsave(&list_lock, flags);
+	list_add(&block->alloc_node, &omap_dmm->alloc_head);
+	spin_unlock_irqrestore(&list_lock, flags);
+
+	return block;
+}
+
+/* note: if you have pin'd pages, you should have already unpin'd first! */
+int tiler_release(struct tiler_block *block)
+{
+	int ret = tcm_free(&block->area);
+	unsigned long flags;
+
+	if (block->area.tcm)
+		dev_err(omap_dmm->dev, "failed to release block\n");
+
+	spin_lock_irqsave(&list_lock, flags);
+	list_del(&block->alloc_node);
+	spin_unlock_irqrestore(&list_lock, flags);
+
+	kfree(block);
+	return ret;
+}
+
+/*
+ * Utils
+ */
+
+/* calculate the tiler space address of a pixel in a view orientation...
+ * below description copied from the display subsystem section of TRM:
+ *
+ * When the TILER is addressed, the bits:
+ *   [28:27] = 0x0 for 8-bit tiled
+ *             0x1 for 16-bit tiled
+ *             0x2 for 32-bit tiled
+ *             0x3 for page mode
+ *   [31:29] = 0x0 for 0-degree view
+ *             0x1 for 180-degree view + mirroring
+ *             0x2 for 0-degree view + mirroring
+ *             0x3 for 180-degree view
+ *             0x4 for 270-degree view + mirroring
+ *             0x5 for 270-degree view
+ *             0x6 for 90-degree view
+ *             0x7 for 90-degree view + mirroring
+ * Otherwise the bits indicated the corresponding bit address to access
+ * the SDRAM.
+ */
+static u32 tiler_get_address(enum tiler_fmt fmt, u32 orient, u32 x, u32 y)
+{
+	u32 x_bits, y_bits, tmp, x_mask, y_mask, alignment;
+
+	x_bits = CONT_WIDTH_BITS - geom[fmt].x_shft;
+	y_bits = CONT_HEIGHT_BITS - geom[fmt].y_shft;
+	alignment = geom[fmt].x_shft + geom[fmt].y_shft;
+
+	/* validate coordinate */
+	x_mask = MASK(x_bits);
+	y_mask = MASK(y_bits);
+
+	if (x < 0 || x > x_mask || y < 0 || y > y_mask) {
+		DBG("invalid coords: %u < 0 || %u > %u || %u < 0 || %u > %u",
+				x, x, x_mask, y, y, y_mask);
+		return 0;
+	}
+
+	/* account for mirroring */
+	if (orient & MASK_X_INVERT)
+		x ^= x_mask;
+	if (orient & MASK_Y_INVERT)
+		y ^= y_mask;
+
+	/* get coordinate address */
+	if (orient & MASK_XY_FLIP)
+		tmp = ((x << y_bits) + y);
+	else
+		tmp = ((y << x_bits) + x);
+
+	return TIL_ADDR((tmp << alignment), orient, fmt);
+}
+
+dma_addr_t tiler_ssptr(struct tiler_block *block)
+{
+	BUG_ON(!validfmt(block->fmt));
+
+	return TILVIEW_8BIT + tiler_get_address(block->fmt, 0,
+			block->area.p0.x * geom[block->fmt].slot_w,
+			block->area.p0.y * geom[block->fmt].slot_h);
+}
+
+dma_addr_t tiler_tsptr(struct tiler_block *block, u32 orient,
+		u32 x, u32 y)
+{
+	struct tcm_pt *p = &block->area.p0;
+	BUG_ON(!validfmt(block->fmt));
+
+	return tiler_get_address(block->fmt, orient,
+			(p->x * geom[block->fmt].slot_w) + x,
+			(p->y * geom[block->fmt].slot_h) + y);
+}
+
+void tiler_align(enum tiler_fmt fmt, u16 *w, u16 *h)
+{
+	BUG_ON(!validfmt(fmt));
+	*w = round_up(*w, geom[fmt].slot_w);
+	*h = round_up(*h, geom[fmt].slot_h);
+}
+
+u32 tiler_stride(enum tiler_fmt fmt, u32 orient)
+{
+	BUG_ON(!validfmt(fmt));
+
+	if (orient & MASK_XY_FLIP)
+		return 1 << (CONT_HEIGHT_BITS + geom[fmt].x_shft);
+	else
+		return 1 << (CONT_WIDTH_BITS + geom[fmt].y_shft);
+}
+
+size_t tiler_size(enum tiler_fmt fmt, u16 w, u16 h)
+{
+	tiler_align(fmt, &w, &h);
+	return geom[fmt].cpp * w * h;
+}
+
+size_t tiler_vsize(enum tiler_fmt fmt, u16 w, u16 h)
+{
+	BUG_ON(!validfmt(fmt));
+	return round_up(geom[fmt].cpp * w, PAGE_SIZE) * h;
+}
+
+u32 tiler_get_cpu_cache_flags(void)
+{
+	return omap_dmm->plat_data->cpu_cache_flags;
+}
+
+bool dmm_is_available(void)
+{
+	return omap_dmm ? true : false;
+}
+
+static int omap_dmm_remove(struct platform_device *dev)
+{
+	struct tiler_block *block, *_block;
+	int i;
+	unsigned long flags;
+
+	if (omap_dmm) {
+		/* Disable all enabled interrupts */
+		dmm_write(omap_dmm, 0x7e7e7e7e, DMM_PAT_IRQENABLE_CLR);
+		free_irq(omap_dmm->irq, omap_dmm);
+
+		/* free all area regions */
+		spin_lock_irqsave(&list_lock, flags);
+		list_for_each_entry_safe(block, _block, &omap_dmm->alloc_head,
+					alloc_node) {
+			list_del(&block->alloc_node);
+			kfree(block);
+		}
+		spin_unlock_irqrestore(&list_lock, flags);
+
+		for (i = 0; i < omap_dmm->num_lut; i++)
+			if (omap_dmm->tcm && omap_dmm->tcm[i])
+				omap_dmm->tcm[i]->deinit(omap_dmm->tcm[i]);
+		kfree(omap_dmm->tcm);
+
+		kfree(omap_dmm->engines);
+		if (omap_dmm->refill_va)
+			dma_free_wc(omap_dmm->dev,
+				    REFILL_BUFFER_SIZE * omap_dmm->num_engines,
+				    omap_dmm->refill_va, omap_dmm->refill_pa);
+		if (omap_dmm->dummy_page)
+			__free_page(omap_dmm->dummy_page);
+
+		if (omap_dmm->dmm_workaround)
+			dmm_workaround_uninit(omap_dmm);
+
+		iounmap(omap_dmm->base);
+		kfree(omap_dmm);
+		omap_dmm = NULL;
+	}
+
+	return 0;
+}
+
+static int omap_dmm_probe(struct platform_device *dev)
+{
+	int ret = -EFAULT, i;
+	struct tcm_area area = {0};
+	u32 hwinfo, pat_geom;
+	struct resource *mem;
+
+	omap_dmm = kzalloc(sizeof(*omap_dmm), GFP_KERNEL);
+	if (!omap_dmm)
+		goto fail;
+
+	/* initialize lists */
+	INIT_LIST_HEAD(&omap_dmm->alloc_head);
+	INIT_LIST_HEAD(&omap_dmm->idle_head);
+
+	init_waitqueue_head(&omap_dmm->engine_queue);
+
+	if (dev->dev.of_node) {
+		const struct of_device_id *match;
+
+		match = of_match_node(dmm_of_match, dev->dev.of_node);
+		if (!match) {
+			dev_err(&dev->dev, "failed to find matching device node\n");
+			ret = -ENODEV;
+			goto fail;
+		}
+
+		omap_dmm->plat_data = match->data;
+	}
+
+	/* lookup hwmod data - base address and irq */
+	mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&dev->dev, "failed to get base address resource\n");
+		goto fail;
+	}
+
+	omap_dmm->phys_base = mem->start;
+	omap_dmm->base = ioremap(mem->start, SZ_2K);
+
+	if (!omap_dmm->base) {
+		dev_err(&dev->dev, "failed to get dmm base address\n");
+		goto fail;
+	}
+
+	omap_dmm->irq = platform_get_irq(dev, 0);
+	if (omap_dmm->irq < 0)
+		goto fail;
+
+	omap_dmm->dev = &dev->dev;
+
+	if (of_machine_is_compatible("ti,dra7")) {
+		/*
+		 * DRA7 Errata i878 says that MPU should not be used to access
+		 * RAM and DMM at the same time. As it's not possible to prevent
+		 * MPU accessing RAM, we need to access DMM via a proxy.
+		 */
+		if (!dmm_workaround_init(omap_dmm)) {
+			omap_dmm->dmm_workaround = true;
+			dev_info(&dev->dev,
+				"workaround for errata i878 in use\n");
+		} else {
+			dev_warn(&dev->dev,
+				 "failed to initialize work-around for i878\n");
+		}
+	}
+
+	hwinfo = dmm_read(omap_dmm, DMM_PAT_HWINFO);
+	omap_dmm->num_engines = (hwinfo >> 24) & 0x1F;
+	omap_dmm->num_lut = (hwinfo >> 16) & 0x1F;
+	omap_dmm->container_width = 256;
+	omap_dmm->container_height = 128;
+
+	atomic_set(&omap_dmm->engine_counter, omap_dmm->num_engines);
+
+	/* read out actual LUT width and height */
+	pat_geom = dmm_read(omap_dmm, DMM_PAT_GEOMETRY);
+	omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5;
+	omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5;
+
+	/* increment LUT by one if on OMAP5 */
+	/* LUT has twice the height, and is split into a separate container */
+	if (omap_dmm->lut_height != omap_dmm->container_height)
+		omap_dmm->num_lut++;
+
+	/* initialize DMM registers */
+	dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__0);
+	dmm_write(omap_dmm, 0x88888888, DMM_PAT_VIEW__1);
+	dmm_write(omap_dmm, 0x80808080, DMM_PAT_VIEW_MAP__0);
+	dmm_write(omap_dmm, 0x80000000, DMM_PAT_VIEW_MAP_BASE);
+	dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__0);
+	dmm_write(omap_dmm, 0x88888888, DMM_TILER_OR__1);
+
+	omap_dmm->dummy_page = alloc_page(GFP_KERNEL | __GFP_DMA32);
+	if (!omap_dmm->dummy_page) {
+		dev_err(&dev->dev, "could not allocate dummy page\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* set dma mask for device */
+	ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		goto fail;
+
+	omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page);
+
+	/* alloc refill memory */
+	omap_dmm->refill_va = dma_alloc_wc(&dev->dev,
+					   REFILL_BUFFER_SIZE * omap_dmm->num_engines,
+					   &omap_dmm->refill_pa, GFP_KERNEL);
+	if (!omap_dmm->refill_va) {
+		dev_err(&dev->dev, "could not allocate refill memory\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* alloc engines */
+	omap_dmm->engines = kcalloc(omap_dmm->num_engines,
+				    sizeof(*omap_dmm->engines), GFP_KERNEL);
+	if (!omap_dmm->engines) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	for (i = 0; i < omap_dmm->num_engines; i++) {
+		omap_dmm->engines[i].id = i;
+		omap_dmm->engines[i].dmm = omap_dmm;
+		omap_dmm->engines[i].refill_va = omap_dmm->refill_va +
+						(REFILL_BUFFER_SIZE * i);
+		omap_dmm->engines[i].refill_pa = omap_dmm->refill_pa +
+						(REFILL_BUFFER_SIZE * i);
+		init_completion(&omap_dmm->engines[i].compl);
+
+		list_add(&omap_dmm->engines[i].idle_node, &omap_dmm->idle_head);
+	}
+
+	omap_dmm->tcm = kcalloc(omap_dmm->num_lut, sizeof(*omap_dmm->tcm),
+				GFP_KERNEL);
+	if (!omap_dmm->tcm) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* init containers */
+	/* Each LUT is associated with a TCM (container manager).  We use the
+	   lut_id to denote the lut_id used to identify the correct LUT for
+	   programming during reill operations */
+	for (i = 0; i < omap_dmm->num_lut; i++) {
+		omap_dmm->tcm[i] = sita_init(omap_dmm->container_width,
+						omap_dmm->container_height);
+
+		if (!omap_dmm->tcm[i]) {
+			dev_err(&dev->dev, "failed to allocate container\n");
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		omap_dmm->tcm[i]->lut_id = i;
+	}
+
+	/* assign access mode containers to applicable tcm container */
+	/* OMAP 4 has 1 container for all 4 views */
+	/* OMAP 5 has 2 containers, 1 for 2D and 1 for 1D */
+	containers[TILFMT_8BIT] = omap_dmm->tcm[0];
+	containers[TILFMT_16BIT] = omap_dmm->tcm[0];
+	containers[TILFMT_32BIT] = omap_dmm->tcm[0];
+
+	if (omap_dmm->container_height != omap_dmm->lut_height) {
+		/* second LUT is used for PAGE mode.  Programming must use
+		   y offset that is added to all y coordinates.  LUT id is still
+		   0, because it is the same LUT, just the upper 128 lines */
+		containers[TILFMT_PAGE] = omap_dmm->tcm[1];
+		omap_dmm->tcm[1]->y_offset = OMAP5_LUT_OFFSET;
+		omap_dmm->tcm[1]->lut_id = 0;
+	} else {
+		containers[TILFMT_PAGE] = omap_dmm->tcm[0];
+	}
+
+	area = (struct tcm_area) {
+		.tcm = NULL,
+		.p1.x = omap_dmm->container_width - 1,
+		.p1.y = omap_dmm->container_height - 1,
+	};
+
+	ret = request_irq(omap_dmm->irq, omap_dmm_irq_handler, IRQF_SHARED,
+				"omap_dmm_irq_handler", omap_dmm);
+
+	if (ret) {
+		dev_err(&dev->dev, "couldn't register IRQ %d, error %d\n",
+			omap_dmm->irq, ret);
+		omap_dmm->irq = -1;
+		goto fail;
+	}
+
+	/* Enable all interrupts for each refill engine except
+	 * ERR_LUT_MISS<n> (which is just advisory, and we don't care
+	 * about because we want to be able to refill live scanout
+	 * buffers for accelerated pan/scroll) and FILL_DSC<n> which
+	 * we just generally don't care about.
+	 */
+	dmm_write(omap_dmm, 0x7e7e7e7e, DMM_PAT_IRQENABLE_SET);
+
+	/* initialize all LUTs to dummy page entries */
+	for (i = 0; i < omap_dmm->num_lut; i++) {
+		area.tcm = omap_dmm->tcm[i];
+		if (fill(&area, NULL, 0, 0, true))
+			dev_err(omap_dmm->dev, "refill failed");
+	}
+
+	dev_info(omap_dmm->dev, "initialized all PAT entries\n");
+
+	return 0;
+
+fail:
+	if (omap_dmm_remove(dev))
+		dev_err(&dev->dev, "cleanup failed\n");
+	return ret;
+}
+
+/*
+ * debugfs support
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+static const char *alphabet = "abcdefghijklmnopqrstuvwxyz"
+				"ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
+static const char *special = ".,:;'\"`~!^-+";
+
+static void fill_map(char **map, int xdiv, int ydiv, struct tcm_area *a,
+							char c, bool ovw)
+{
+	int x, y;
+	for (y = a->p0.y / ydiv; y <= a->p1.y / ydiv; y++)
+		for (x = a->p0.x / xdiv; x <= a->p1.x / xdiv; x++)
+			if (map[y][x] == ' ' || ovw)
+				map[y][x] = c;
+}
+
+static void fill_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p,
+									char c)
+{
+	map[p->y / ydiv][p->x / xdiv] = c;
+}
+
+static char read_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p)
+{
+	return map[p->y / ydiv][p->x / xdiv];
+}
+
+static int map_width(int xdiv, int x0, int x1)
+{
+	return (x1 / xdiv) - (x0 / xdiv) + 1;
+}
+
+static void text_map(char **map, int xdiv, char *nice, int yd, int x0, int x1)
+{
+	char *p = map[yd] + (x0 / xdiv);
+	int w = (map_width(xdiv, x0, x1) - strlen(nice)) / 2;
+	if (w >= 0) {
+		p += w;
+		while (*nice)
+			*p++ = *nice++;
+	}
+}
+
+static void map_1d_info(char **map, int xdiv, int ydiv, char *nice,
+							struct tcm_area *a)
+{
+	sprintf(nice, "%dK", tcm_sizeof(*a) * 4);
+	if (a->p0.y + 1 < a->p1.y) {
+		text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, 0,
+							256 - 1);
+	} else if (a->p0.y < a->p1.y) {
+		if (strlen(nice) < map_width(xdiv, a->p0.x, 256 - 1))
+			text_map(map, xdiv, nice, a->p0.y / ydiv,
+					a->p0.x + xdiv,	256 - 1);
+		else if (strlen(nice) < map_width(xdiv, 0, a->p1.x))
+			text_map(map, xdiv, nice, a->p1.y / ydiv,
+					0, a->p1.y - xdiv);
+	} else if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) {
+		text_map(map, xdiv, nice, a->p0.y / ydiv, a->p0.x, a->p1.x);
+	}
+}
+
+static void map_2d_info(char **map, int xdiv, int ydiv, char *nice,
+							struct tcm_area *a)
+{
+	sprintf(nice, "(%d*%d)", tcm_awidth(*a), tcm_aheight(*a));
+	if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x))
+		text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv,
+							a->p0.x, a->p1.x);
+}
+
+int tiler_map_show(struct seq_file *s, void *arg)
+{
+	int xdiv = 2, ydiv = 1;
+	char **map = NULL, *global_map;
+	struct tiler_block *block;
+	struct tcm_area a, p;
+	int i;
+	const char *m2d = alphabet;
+	const char *a2d = special;
+	const char *m2dp = m2d, *a2dp = a2d;
+	char nice[128];
+	int h_adj;
+	int w_adj;
+	unsigned long flags;
+	int lut_idx;
+
+
+	if (!omap_dmm) {
+		/* early return if dmm/tiler device is not initialized */
+		return 0;
+	}
+
+	h_adj = omap_dmm->container_height / ydiv;
+	w_adj = omap_dmm->container_width / xdiv;
+
+	map = kmalloc_array(h_adj, sizeof(*map), GFP_KERNEL);
+	global_map = kmalloc_array(w_adj + 1, h_adj, GFP_KERNEL);
+
+	if (!map || !global_map)
+		goto error;
+
+	for (lut_idx = 0; lut_idx < omap_dmm->num_lut; lut_idx++) {
+		memset(map, 0, h_adj * sizeof(*map));
+		memset(global_map, ' ', (w_adj + 1) * h_adj);
+
+		for (i = 0; i < omap_dmm->container_height; i++) {
+			map[i] = global_map + i * (w_adj + 1);
+			map[i][w_adj] = 0;
+		}
+
+		spin_lock_irqsave(&list_lock, flags);
+
+		list_for_each_entry(block, &omap_dmm->alloc_head, alloc_node) {
+			if (block->area.tcm == omap_dmm->tcm[lut_idx]) {
+				if (block->fmt != TILFMT_PAGE) {
+					fill_map(map, xdiv, ydiv, &block->area,
+						*m2dp, true);
+					if (!*++a2dp)
+						a2dp = a2d;
+					if (!*++m2dp)
+						m2dp = m2d;
+					map_2d_info(map, xdiv, ydiv, nice,
+							&block->area);
+				} else {
+					bool start = read_map_pt(map, xdiv,
+						ydiv, &block->area.p0) == ' ';
+					bool end = read_map_pt(map, xdiv, ydiv,
+							&block->area.p1) == ' ';
+
+					tcm_for_each_slice(a, block->area, p)
+						fill_map(map, xdiv, ydiv, &a,
+							'=', true);
+					fill_map_pt(map, xdiv, ydiv,
+							&block->area.p0,
+							start ? '<' : 'X');
+					fill_map_pt(map, xdiv, ydiv,
+							&block->area.p1,
+							end ? '>' : 'X');
+					map_1d_info(map, xdiv, ydiv, nice,
+							&block->area);
+				}
+			}
+		}
+
+		spin_unlock_irqrestore(&list_lock, flags);
+
+		if (s) {
+			seq_printf(s, "CONTAINER %d DUMP BEGIN\n", lut_idx);
+			for (i = 0; i < 128; i++)
+				seq_printf(s, "%03d:%s\n", i, map[i]);
+			seq_printf(s, "CONTAINER %d DUMP END\n", lut_idx);
+		} else {
+			dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP BEGIN\n",
+				lut_idx);
+			for (i = 0; i < 128; i++)
+				dev_dbg(omap_dmm->dev, "%03d:%s\n", i, map[i]);
+			dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP END\n",
+				lut_idx);
+		}
+	}
+
+error:
+	kfree(map);
+	kfree(global_map);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int omap_dmm_resume(struct device *dev)
+{
+	struct tcm_area area;
+	int i;
+
+	if (!omap_dmm)
+		return -ENODEV;
+
+	area = (struct tcm_area) {
+		.tcm = NULL,
+		.p1.x = omap_dmm->container_width - 1,
+		.p1.y = omap_dmm->container_height - 1,
+	};
+
+	/* initialize all LUTs to dummy page entries */
+	for (i = 0; i < omap_dmm->num_lut; i++) {
+		area.tcm = omap_dmm->tcm[i];
+		if (fill(&area, NULL, 0, 0, true))
+			dev_err(dev, "refill failed");
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(omap_dmm_pm_ops, NULL, omap_dmm_resume);
+
+#if defined(CONFIG_OF)
+static const struct dmm_platform_data dmm_omap4_platform_data = {
+	.cpu_cache_flags = OMAP_BO_WC,
+};
+
+static const struct dmm_platform_data dmm_omap5_platform_data = {
+	.cpu_cache_flags = OMAP_BO_UNCACHED,
+};
+
+static const struct of_device_id dmm_of_match[] = {
+	{
+		.compatible = "ti,omap4-dmm",
+		.data = &dmm_omap4_platform_data,
+	},
+	{
+		.compatible = "ti,omap5-dmm",
+		.data = &dmm_omap5_platform_data,
+	},
+	{},
+};
+#endif
+
+struct platform_driver omap_dmm_driver = {
+	.probe = omap_dmm_probe,
+	.remove = omap_dmm_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = DMM_DRIVER_NAME,
+		.of_match_table = of_match_ptr(dmm_of_match),
+		.pm = &omap_dmm_pm_ops,
+	},
+};
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Andy Gross <andy.gross@ti.com>");
+MODULE_DESCRIPTION("OMAP DMM/Tiler Driver");