Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 329 insertions, 0 deletions

diff --git a/drivers/iio/light/cm3605.c b/drivers/iio/light/cm3605.c
new file mode 100644
index 000000000..0b30db77f
--- /dev/null
+++ b/drivers/iio/light/cm3605.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * CM3605 Ambient Light and Proximity Sensor
+ *
+ * Copyright (C) 2016 Linaro Ltd.
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This hardware was found in the very first Nexus One handset from Google/HTC
+ * and an early endavour into mobile light and proximity sensors.
+ */
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/consumer.h> /* To get our ADC channel */
+#include <linux/iio/types.h> /* To deal with our ADC channel */
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/math64.h>
+#include <linux/pm.h>
+
+#define CM3605_PROX_CHANNEL 0
+#define CM3605_ALS_CHANNEL 1
+#define CM3605_AOUT_TYP_MAX_MV 1550
+/* It should not go above 1.650V according to the data sheet */
+#define CM3605_AOUT_MAX_MV 1650
+
+/**
+ * struct cm3605 - CM3605 state
+ * @dev: pointer to parent device
+ * @vdd: regulator controlling VDD
+ * @aset: sleep enable GPIO, high = sleep
+ * @aout: IIO ADC channel to convert the AOUT signal
+ * @als_max: maximum LUX detection (depends on RSET)
+ * @dir: proximity direction: start as FALLING
+ * @led: trigger for the infrared LED used by the proximity sensor
+ */
+struct cm3605 {
+	struct device *dev;
+	struct regulator *vdd;
+	struct gpio_desc *aset;
+	struct iio_channel *aout;
+	s32 als_max;
+	enum iio_event_direction dir;
+	struct led_trigger *led;
+};
+
+static irqreturn_t cm3605_prox_irq(int irq, void *d)
+{
+	struct iio_dev *indio_dev = d;
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+	u64 ev;
+
+	ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, CM3605_PROX_CHANNEL,
+				  IIO_EV_TYPE_THRESH, cm3605->dir);
+	iio_push_event(indio_dev, ev, iio_get_time_ns(indio_dev));
+
+	/* Invert the edge for each event */
+	if (cm3605->dir == IIO_EV_DIR_RISING)
+		cm3605->dir = IIO_EV_DIR_FALLING;
+	else
+		cm3605->dir = IIO_EV_DIR_RISING;
+
+	return IRQ_HANDLED;
+}
+
+static int cm3605_get_lux(struct cm3605 *cm3605)
+{
+	int ret, res;
+	s64 lux;
+
+	ret = iio_read_channel_processed(cm3605->aout, &res);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(cm3605->dev, "read %d mV from ADC\n", res);
+
+	/*
+	 * AOUT has an offset of ~30mV then linear at dark
+	 * then goes from 2.54 up to 650 LUX yielding 1.55V
+	 * (1550 mV) so scale the returned value to this interval
+	 * using simple linear interpolation.
+	 */
+	if (res < 30)
+		return 0;
+	if (res > CM3605_AOUT_MAX_MV)
+		dev_err(cm3605->dev, "device out of range\n");
+
+	/* Remove bias */
+	lux = res - 30;
+
+	/* Linear interpolation between 0 and ALS typ max */
+	lux *= cm3605->als_max;
+	lux = div64_s64(lux, CM3605_AOUT_TYP_MAX_MV);
+
+	return lux;
+}
+
+static int cm3605_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = cm3605_get_lux(cm3605);
+			if (ret < 0)
+				return ret;
+			*val = ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info cm3605_info = {
+	.read_raw = cm3605_read_raw,
+};
+
+static const struct iio_event_spec cm3605_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec cm3605_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.event_spec = cm3605_events,
+		.num_event_specs = ARRAY_SIZE(cm3605_events),
+	},
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.channel = CM3605_ALS_CHANNEL,
+	},
+};
+
+static int cm3605_probe(struct platform_device *pdev)
+{
+	struct cm3605 *cm3605;
+	struct iio_dev *indio_dev;
+	struct device *dev = &pdev->dev;
+	enum iio_chan_type ch_type;
+	u32 rset;
+	int irq;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*cm3605));
+	if (!indio_dev)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, indio_dev);
+
+	cm3605 = iio_priv(indio_dev);
+	cm3605->dev = dev;
+	cm3605->dir = IIO_EV_DIR_FALLING;
+
+	ret = device_property_read_u32(dev, "capella,aset-resistance-ohms", &rset);
+	if (ret) {
+		dev_info(dev, "no RSET specified, assuming 100K\n");
+		rset = 100000;
+	}
+	switch (rset) {
+	case 50000:
+		cm3605->als_max = 650;
+		break;
+	case 100000:
+		cm3605->als_max = 300;
+		break;
+	case 300000:
+		cm3605->als_max = 100;
+		break;
+	case 600000:
+		cm3605->als_max = 50;
+		break;
+	default:
+		dev_info(dev, "non-standard resistance\n");
+		return -EINVAL;
+	}
+
+	cm3605->aout = devm_iio_channel_get(dev, "aout");
+	if (IS_ERR(cm3605->aout)) {
+		ret = PTR_ERR(cm3605->aout);
+		ret = (ret == -ENODEV) ? -EPROBE_DEFER : ret;
+		return dev_err_probe(dev, ret, "failed to get AOUT ADC channel\n");
+	}
+	ret = iio_get_channel_type(cm3605->aout, &ch_type);
+	if (ret < 0)
+		return ret;
+	if (ch_type != IIO_VOLTAGE) {
+		dev_err(dev, "wrong type of IIO channel specified for AOUT\n");
+		return -EINVAL;
+	}
+
+	cm3605->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(cm3605->vdd))
+		return dev_err_probe(dev, PTR_ERR(cm3605->vdd),
+				     "failed to get VDD regulator\n");
+
+	ret = regulator_enable(cm3605->vdd);
+	if (ret) {
+		dev_err(dev, "failed to enable VDD regulator\n");
+		return ret;
+	}
+
+	cm3605->aset = devm_gpiod_get(dev, "aset", GPIOD_OUT_HIGH);
+	if (IS_ERR(cm3605->aset)) {
+		ret = dev_err_probe(dev, PTR_ERR(cm3605->aset), "no ASET GPIO\n");
+		goto out_disable_vdd;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = dev_err_probe(dev, irq, "failed to get irq\n");
+		goto out_disable_aset;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, cm3605_prox_irq,
+					NULL, 0, "cm3605", indio_dev);
+	if (ret) {
+		dev_err(dev, "unable to request IRQ\n");
+		goto out_disable_aset;
+	}
+
+	/* Just name the trigger the same as the driver */
+	led_trigger_register_simple("cm3605", &cm3605->led);
+	led_trigger_event(cm3605->led, LED_FULL);
+
+	indio_dev->info = &cm3605_info;
+	indio_dev->name = "cm3605";
+	indio_dev->channels = cm3605_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cm3605_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto out_remove_trigger;
+	dev_info(dev, "Capella Microsystems CM3605 enabled range 0..%d LUX\n",
+		 cm3605->als_max);
+
+	return 0;
+
+out_remove_trigger:
+	led_trigger_event(cm3605->led, LED_OFF);
+	led_trigger_unregister_simple(cm3605->led);
+out_disable_aset:
+	gpiod_set_value_cansleep(cm3605->aset, 0);
+out_disable_vdd:
+	regulator_disable(cm3605->vdd);
+	return ret;
+}
+
+static int cm3605_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+
+	led_trigger_event(cm3605->led, LED_OFF);
+	led_trigger_unregister_simple(cm3605->led);
+	gpiod_set_value_cansleep(cm3605->aset, 0);
+	iio_device_unregister(indio_dev);
+	regulator_disable(cm3605->vdd);
+
+	return 0;
+}
+
+static int cm3605_pm_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+
+	led_trigger_event(cm3605->led, LED_OFF);
+	regulator_disable(cm3605->vdd);
+
+	return 0;
+}
+
+static int cm3605_pm_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+	int ret;
+
+	ret = regulator_enable(cm3605->vdd);
+	if (ret)
+		dev_err(dev, "failed to enable regulator in resume path\n");
+	led_trigger_event(cm3605->led, LED_FULL);
+
+	return 0;
+}
+static DEFINE_SIMPLE_DEV_PM_OPS(cm3605_dev_pm_ops, cm3605_pm_suspend,
+				cm3605_pm_resume);
+
+static const struct of_device_id cm3605_of_match[] = {
+	{.compatible = "capella,cm3605"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, cm3605_of_match);
+
+static struct platform_driver cm3605_driver = {
+	.driver = {
+		.name = "cm3605",
+		.of_match_table = cm3605_of_match,
+		.pm = pm_sleep_ptr(&cm3605_dev_pm_ops),
+	},
+	.probe = cm3605_probe,
+	.remove = cm3605_remove,
+};
+module_platform_driver(cm3605_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("CM3605 ambient light and proximity sensor driver");
+MODULE_LICENSE("GPL");