diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-08 16:58:07 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-08 16:58:07 +0000 |
commit | 5a6d13c86f2fe6304450e907fc1d8d72da82efef (patch) | |
tree | 1bd4e8854203c575eabaa99e2c509f8886065733 /drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | |
parent | Adding upstream version 6.1.76. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.82.upstream/6.1.82upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_main.c')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 98 |
1 files changed, 68 insertions, 30 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 9e0e13638..086cc2573 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2764,7 +2764,6 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; u32 eicr = adapter->interrupt_event; - s32 rc; if (test_bit(__IXGBE_DOWN, &adapter->state)) return; @@ -2798,14 +2797,13 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) } /* Check if this is not due to overtemp */ - if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP) + if (!hw->phy.ops.check_overtemp(hw)) return; break; case IXGBE_DEV_ID_X550EM_A_1G_T: case IXGBE_DEV_ID_X550EM_A_1G_T_L: - rc = hw->phy.ops.check_overtemp(hw); - if (rc != IXGBE_ERR_OVERTEMP) + if (!hw->phy.ops.check_overtemp(hw)) return; break; default: @@ -2949,8 +2947,8 @@ static void ixgbe_check_lsc(struct ixgbe_adapter *adapter) static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter, u64 qmask) { - u32 mask; struct ixgbe_hw *hw = &adapter->hw; + u32 mask; switch (hw->mac.type) { case ixgbe_mac_82598EB: @@ -5520,7 +5518,7 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) { u32 speed; bool autoneg, link_up = false; - int ret = IXGBE_ERR_LINK_SETUP; + int ret = -EIO; if (hw->mac.ops.check_link) ret = hw->mac.ops.check_link(hw, &speed, &link_up, false); @@ -5991,13 +5989,13 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) err = hw->mac.ops.init_hw(hw); switch (err) { case 0: - case IXGBE_ERR_SFP_NOT_PRESENT: - case IXGBE_ERR_SFP_NOT_SUPPORTED: + case -ENOENT: + case -EOPNOTSUPP: break; - case IXGBE_ERR_PRIMARY_REQUESTS_PENDING: + case -EALREADY: e_dev_err("primary disable timed out\n"); break; - case IXGBE_ERR_EEPROM_VERSION: + case -EACCES: /* We are running on a pre-production device, log a warning */ e_dev_warn("This device is a pre-production adapter/LOM. " "Please be aware there may be issues associated with " @@ -7837,10 +7835,10 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) adapter->sfp_poll_time = jiffies + IXGBE_SFP_POLL_JIFFIES - 1; err = hw->phy.ops.identify_sfp(hw); - if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + if (err == -EOPNOTSUPP) goto sfp_out; - if (err == IXGBE_ERR_SFP_NOT_PRESENT) { + if (err == -ENOENT) { /* If no cable is present, then we need to reset * the next time we find a good cable. */ adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; @@ -7866,7 +7864,7 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) else err = hw->mac.ops.setup_sfp(hw); - if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + if (err == -EOPNOTSUPP) goto sfp_out; adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; @@ -7875,8 +7873,8 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) sfp_out: clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); - if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) && - (adapter->netdev->reg_state == NETREG_REGISTERED)) { + if (err == -EOPNOTSUPP && + adapter->netdev->reg_state == NETREG_REGISTERED) { e_dev_err("failed to initialize because an unsupported " "SFP+ module type was detected.\n"); e_dev_err("Reload the driver after installing a " @@ -7946,7 +7944,7 @@ static void ixgbe_service_timer(struct timer_list *t) static void ixgbe_phy_interrupt_subtask(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; - u32 status; + bool overtemp; if (!(adapter->flags2 & IXGBE_FLAG2_PHY_INTERRUPT)) return; @@ -7956,11 +7954,9 @@ static void ixgbe_phy_interrupt_subtask(struct ixgbe_adapter *adapter) if (!hw->phy.ops.handle_lasi) return; - status = hw->phy.ops.handle_lasi(&adapter->hw); - if (status != IXGBE_ERR_OVERTEMP) - return; - - e_crit(drv, "%s\n", ixgbe_overheat_msg); + hw->phy.ops.handle_lasi(&adapter->hw, &overtemp); + if (overtemp) + e_crit(drv, "%s\n", ixgbe_overheat_msg); } static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter) @@ -10548,6 +10544,44 @@ static void ixgbe_reset_rxr_stats(struct ixgbe_ring *rx_ring) } /** + * ixgbe_irq_disable_single - Disable single IRQ vector + * @adapter: adapter structure + * @ring: ring index + **/ +static void ixgbe_irq_disable_single(struct ixgbe_adapter *adapter, u32 ring) +{ + struct ixgbe_hw *hw = &adapter->hw; + u64 qmask = BIT_ULL(ring); + u32 mask; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + mask = qmask & IXGBE_EIMC_RTX_QUEUE; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, mask); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + case ixgbe_mac_x550em_a: + mask = (qmask & 0xFFFFFFFF); + if (mask) + IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask); + mask = (qmask >> 32); + if (mask) + IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask); + break; + default: + break; + } + IXGBE_WRITE_FLUSH(&adapter->hw); + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + synchronize_irq(adapter->msix_entries[ring].vector); + else + synchronize_irq(adapter->pdev->irq); +} + +/** * ixgbe_txrx_ring_disable - Disable Rx/Tx/XDP Tx rings * @adapter: adapter structure * @ring: ring index @@ -10563,6 +10597,11 @@ void ixgbe_txrx_ring_disable(struct ixgbe_adapter *adapter, int ring) tx_ring = adapter->tx_ring[ring]; xdp_ring = adapter->xdp_ring[ring]; + ixgbe_irq_disable_single(adapter, ring); + + /* Rx/Tx/XDP Tx share the same napi context. */ + napi_disable(&rx_ring->q_vector->napi); + ixgbe_disable_txr(adapter, tx_ring); if (xdp_ring) ixgbe_disable_txr(adapter, xdp_ring); @@ -10571,9 +10610,6 @@ void ixgbe_txrx_ring_disable(struct ixgbe_adapter *adapter, int ring) if (xdp_ring) synchronize_rcu(); - /* Rx/Tx/XDP Tx share the same napi context. */ - napi_disable(&rx_ring->q_vector->napi); - ixgbe_clean_tx_ring(tx_ring); if (xdp_ring) ixgbe_clean_tx_ring(xdp_ring); @@ -10601,9 +10637,6 @@ void ixgbe_txrx_ring_enable(struct ixgbe_adapter *adapter, int ring) tx_ring = adapter->tx_ring[ring]; xdp_ring = adapter->xdp_ring[ring]; - /* Rx/Tx/XDP Tx share the same napi context. */ - napi_enable(&rx_ring->q_vector->napi); - ixgbe_configure_tx_ring(adapter, tx_ring); if (xdp_ring) ixgbe_configure_tx_ring(adapter, xdp_ring); @@ -10612,6 +10645,11 @@ void ixgbe_txrx_ring_enable(struct ixgbe_adapter *adapter, int ring) clear_bit(__IXGBE_TX_DISABLED, &tx_ring->state); if (xdp_ring) clear_bit(__IXGBE_TX_DISABLED, &xdp_ring->state); + + /* Rx/Tx/XDP Tx share the same napi context. */ + napi_enable(&rx_ring->q_vector->napi); + ixgbe_irq_enable_queues(adapter, BIT_ULL(ring)); + IXGBE_WRITE_FLUSH(&adapter->hw); } /** @@ -10943,9 +10981,9 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = hw->mac.ops.reset_hw(hw); hw->phy.reset_if_overtemp = false; ixgbe_set_eee_capable(adapter); - if (err == IXGBE_ERR_SFP_NOT_PRESENT) { + if (err == -ENOENT) { err = 0; - } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { + } else if (err == -EOPNOTSUPP) { e_dev_err("failed to load because an unsupported SFP+ or QSFP module type was detected.\n"); e_dev_err("Reload the driver after installing a supported module.\n"); goto err_sw_init; @@ -11161,7 +11199,7 @@ skip_sriov: /* reset the hardware with the new settings */ err = hw->mac.ops.start_hw(hw); - if (err == IXGBE_ERR_EEPROM_VERSION) { + if (err == -EACCES) { /* We are running on a pre-production device, log a warning */ e_dev_warn("This device is a pre-production adapter/LOM. " "Please be aware there may be issues associated " |