Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 215 insertions, 0 deletions

diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2400.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2400.c
new file mode 100644
index 000000000..b29148ce7
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii-qdf2400.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ */
+
+/* Qualcomm Technologies, Inc. QDF2400 EMAC SGMII Controller driver.
+ */
+
+#include <linux/iopoll.h>
+#include "emac.h"
+
+/* EMAC_SGMII register offsets */
+#define EMAC_SGMII_PHY_TX_PWR_CTRL		0x000C
+#define EMAC_SGMII_PHY_LANE_CTRL1		0x0018
+#define EMAC_SGMII_PHY_CDR_CTRL0		0x0058
+#define EMAC_SGMII_PHY_POW_DWN_CTRL0		0x0080
+#define EMAC_SGMII_PHY_RESET_CTRL		0x00a8
+#define EMAC_SGMII_PHY_INTERRUPT_MASK		0x00b4
+
+/* SGMII digital lane registers */
+#define EMAC_SGMII_LN_DRVR_CTRL0		0x000C
+#define EMAC_SGMII_LN_DRVR_CTRL1		0x0010
+#define EMAC_SGMII_LN_DRVR_TAP_EN		0x0018
+#define EMAC_SGMII_LN_TX_MARGINING		0x001C
+#define EMAC_SGMII_LN_TX_PRE			0x0020
+#define EMAC_SGMII_LN_TX_POST			0x0024
+#define EMAC_SGMII_LN_TX_BAND_MODE		0x0060
+#define EMAC_SGMII_LN_LANE_MODE			0x0064
+#define EMAC_SGMII_LN_PARALLEL_RATE		0x007C
+#define EMAC_SGMII_LN_CML_CTRL_MODE0		0x00C0
+#define EMAC_SGMII_LN_MIXER_CTRL_MODE0		0x00D8
+#define EMAC_SGMII_LN_VGA_INITVAL		0x013C
+#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0	0x0184
+#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0	0x0190
+#define EMAC_SGMII_LN_UCDR_SO_CONFIG		0x019C
+#define EMAC_SGMII_LN_RX_BAND			0x01A4
+#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0	0x01C0
+#define EMAC_SGMII_LN_RSM_CONFIG		0x01F8
+#define EMAC_SGMII_LN_SIGDET_ENABLES		0x0230
+#define EMAC_SGMII_LN_SIGDET_CNTRL		0x0234
+#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL	0x0238
+#define EMAC_SGMII_LN_RX_EN_SIGNAL		0x02AC
+#define EMAC_SGMII_LN_RX_MISC_CNTRL0		0x02B8
+#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV		0x02C8
+#define EMAC_SGMII_LN_RX_RESECODE_OFFSET	0x02CC
+
+/* SGMII digital lane register values */
+#define UCDR_STEP_BY_TWO_MODE0			BIT(7)
+#define UCDR_xO_GAIN_MODE(x)			((x) & 0x7f)
+#define UCDR_ENABLE				BIT(6)
+#define UCDR_SO_SATURATION(x)			((x) & 0x3f)
+
+#define SIGDET_LP_BYP_PS4			BIT(7)
+#define SIGDET_EN_PS0_TO_PS2			BIT(6)
+
+#define TXVAL_VALID_INIT			BIT(4)
+#define KR_PCIGEN3_MODE				BIT(0)
+
+#define MAIN_EN					BIT(0)
+
+#define TX_MARGINING_MUX			BIT(6)
+#define TX_MARGINING(x)				((x) & 0x3f)
+
+#define TX_PRE_MUX				BIT(6)
+
+#define TX_POST_MUX				BIT(6)
+
+#define CML_GEAR_MODE(x)			(((x) & 7) << 3)
+#define CML2CMOS_IBOOST_MODE(x)			((x) & 7)
+
+#define RESCODE_OFFSET(x)			((x) & 0x1f)
+
+#define MIXER_LOADB_MODE(x)			(((x) & 0xf) << 2)
+#define MIXER_DATARATE_MODE(x)			((x) & 3)
+
+#define VGA_THRESH_DFE(x)			((x) & 0x3f)
+
+#define SIGDET_LP_BYP_PS0_TO_PS2		BIT(5)
+#define SIGDET_FLT_BYP				BIT(0)
+
+#define SIGDET_LVL(x)				(((x) & 0xf) << 4)
+
+#define SIGDET_DEGLITCH_CTRL(x)			(((x) & 0xf) << 1)
+
+#define INVERT_PCS_RX_CLK			BIT(7)
+
+#define DRVR_LOGIC_CLK_EN			BIT(4)
+#define DRVR_LOGIC_CLK_DIV(x)			((x) & 0xf)
+
+#define PARALLEL_RATE_MODE0(x)			((x) & 0x3)
+
+#define BAND_MODE0(x)				((x) & 0x3)
+
+#define LANE_MODE(x)				((x) & 0x1f)
+
+#define CDR_PD_SEL_MODE0(x)			(((x) & 0x3) << 5)
+#define EN_DLL_MODE0				BIT(4)
+#define EN_IQ_DCC_MODE0				BIT(3)
+#define EN_IQCAL_MODE0				BIT(2)
+
+#define BYPASS_RSM_SAMP_CAL			BIT(1)
+#define BYPASS_RSM_DLL_CAL			BIT(0)
+
+#define L0_RX_EQUALIZE_ENABLE			BIT(6)
+
+#define PWRDN_B					BIT(0)
+
+#define CDR_MAX_CNT(x)				((x) & 0xff)
+
+#define SERDES_START_WAIT_TIMES			100
+
+struct emac_reg_write {
+	unsigned int offset;
+	u32 val;
+};
+
+static void emac_reg_write_all(void __iomem *base,
+			       const struct emac_reg_write *itr, size_t size)
+{
+	size_t i;
+
+	for (i = 0; i < size; ++itr, ++i)
+		writel(itr->val, base + itr->offset);
+}
+
+static const struct emac_reg_write sgmii_laned[] = {
+	/* CDR Settings */
+	{EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
+		UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
+	{EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)},
+	{EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
+
+	/* TX/RX Settings */
+	{EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
+
+	{EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
+	{EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
+	{EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
+	{EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
+	{EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
+
+	{EMAC_SGMII_LN_CML_CTRL_MODE0,
+		CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
+	{EMAC_SGMII_LN_MIXER_CTRL_MODE0,
+		MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
+	{EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
+	{EMAC_SGMII_LN_SIGDET_ENABLES,
+		SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
+	{EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
+
+	{EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
+	{EMAC_SGMII_LN_RX_MISC_CNTRL0, INVERT_PCS_RX_CLK},
+	{EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
+		DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
+
+	{EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
+	{EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(1)},
+	{EMAC_SGMII_LN_RX_BAND, BAND_MODE0(2)},
+	{EMAC_SGMII_LN_DRVR_CTRL1, RESCODE_OFFSET(7)},
+	{EMAC_SGMII_LN_RX_RESECODE_OFFSET, RESCODE_OFFSET(9)},
+	{EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
+	{EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(2) |
+		EN_DLL_MODE0 | EN_IQ_DCC_MODE0 | EN_IQCAL_MODE0},
+	{EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
+};
+
+static const struct emac_reg_write physical_coding_sublayer_programming[] = {
+	{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
+	{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
+	{EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
+	{EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
+};
+
+int emac_sgmii_init_qdf2400(struct emac_adapter *adpt)
+{
+	struct emac_sgmii *phy = &adpt->phy;
+	void __iomem *phy_regs = phy->base;
+	void __iomem *laned = phy->digital;
+	unsigned int i;
+	u32 lnstatus;
+
+	/* PCS lane-x init */
+	emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
+			   ARRAY_SIZE(physical_coding_sublayer_programming));
+
+	/* SGMII lane-x init */
+	emac_reg_write_all(phy->digital, sgmii_laned, ARRAY_SIZE(sgmii_laned));
+
+	/* Power up PCS and start reset lane state machine */
+
+	writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
+	writel(1, laned + SGMII_LN_RSM_START);
+
+	/* Wait for c_ready assertion */
+	for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
+		lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
+		if (lnstatus & BIT(1))
+			break;
+		usleep_range(100, 200);
+	}
+
+	if (i == SERDES_START_WAIT_TIMES) {
+		netdev_err(adpt->netdev, "SGMII failed to start\n");
+		return -EIO;
+	}
+
+	/* Disable digital and SERDES loopback */
+	writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
+	writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
+	writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
+
+	/* Mask out all the SGMII Interrupt */
+	writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
+
+	return 0;
+}