Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 226 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/phy.h b/drivers/net/wireless/intel/iwlwifi/fw/api/phy.h
new file mode 100644
index 000000000..b1b9c2985
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/phy.h
@@ -0,0 +1,226 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright (C) 2012-2014, 2019-2021 Intel Corporation
+ * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
+ * Copyright (C) 2016-2017 Intel Deutschland GmbH
+ */
+#ifndef __iwl_fw_api_phy_h__
+#define __iwl_fw_api_phy_h__
+
+/**
+ * enum iwl_phy_ops_subcmd_ids - PHY group commands
+ */
+enum iwl_phy_ops_subcmd_ids {
+	/**
+	 * @CMD_DTS_MEASUREMENT_TRIGGER_WIDE:
+	 * Uses either &struct iwl_dts_measurement_cmd or
+	 * &struct iwl_ext_dts_measurement_cmd
+	 */
+	CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
+
+	/**
+	 * @CTDP_CONFIG_CMD: &struct iwl_mvm_ctdp_cmd
+	 */
+	CTDP_CONFIG_CMD = 0x03,
+
+	/**
+	 * @TEMP_REPORTING_THRESHOLDS_CMD: &struct temp_report_ths_cmd
+	 */
+	TEMP_REPORTING_THRESHOLDS_CMD = 0x04,
+
+	/**
+	 * @PER_CHAIN_LIMIT_OFFSET_CMD: &struct iwl_geo_tx_power_profiles_cmd
+	 */
+	PER_CHAIN_LIMIT_OFFSET_CMD = 0x05,
+
+	/**
+	 * @PER_PLATFORM_ANT_GAIN_CMD: &struct iwl_ppag_table_cmd
+	 */
+	PER_PLATFORM_ANT_GAIN_CMD = 0x07,
+
+	/**
+	 * @CT_KILL_NOTIFICATION: &struct ct_kill_notif
+	 */
+	CT_KILL_NOTIFICATION = 0xFE,
+
+	/**
+	 * @DTS_MEASUREMENT_NOTIF_WIDE:
+	 * &struct iwl_dts_measurement_notif_v1 or
+	 * &struct iwl_dts_measurement_notif_v2
+	 */
+	DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
+};
+
+/* DTS measurements */
+
+enum iwl_dts_measurement_flags {
+	DTS_TRIGGER_CMD_FLAGS_TEMP	= BIT(0),
+	DTS_TRIGGER_CMD_FLAGS_VOLT	= BIT(1),
+};
+
+/**
+ * struct iwl_dts_measurement_cmd - request DTS temp and/or voltage measurements
+ *
+ * @flags: indicates which measurements we want as specified in
+ *	&enum iwl_dts_measurement_flags
+ */
+struct iwl_dts_measurement_cmd {
+	__le32 flags;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
+
+/**
+* enum iwl_dts_control_measurement_mode - DTS measurement type
+* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
+*                 back (latest value. Not waiting for new value). Use automatic
+*                 SW DTS configuration.
+* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
+*                    trigger DTS reading and provide read back temperature read
+*                    when available.
+* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
+* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
+*                              without measurement trigger.
+*/
+enum iwl_dts_control_measurement_mode {
+	DTS_AUTOMATIC			= 0,
+	DTS_REQUEST_READ		= 1,
+	DTS_OVER_WRITE			= 2,
+	DTS_DIRECT_WITHOUT_MEASURE	= 3,
+};
+
+/**
+* enum iwl_dts_used - DTS to use or used for measurement in the DTS request
+* @DTS_USE_TOP: Top
+* @DTS_USE_CHAIN_A: chain A
+* @DTS_USE_CHAIN_B: chain B
+* @DTS_USE_CHAIN_C: chain C
+* @XTAL_TEMPERATURE: read temperature from xtal
+*/
+enum iwl_dts_used {
+	DTS_USE_TOP		= 0,
+	DTS_USE_CHAIN_A		= 1,
+	DTS_USE_CHAIN_B		= 2,
+	DTS_USE_CHAIN_C		= 3,
+	XTAL_TEMPERATURE	= 4,
+};
+
+/**
+* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
+* @DTS_BIT6_MODE: bit 6 mode
+* @DTS_BIT8_MODE: bit 8 mode
+*/
+enum iwl_dts_bit_mode {
+	DTS_BIT6_MODE	= 0,
+	DTS_BIT8_MODE	= 1,
+};
+
+/**
+ * struct iwl_ext_dts_measurement_cmd - request extended DTS temp measurements
+ * @control_mode: see &enum iwl_dts_control_measurement_mode
+ * @temperature: used when over write DTS mode is selected
+ * @sensor: set temperature sensor to use. See &enum iwl_dts_used
+ * @avg_factor: average factor to DTS in request DTS read mode
+ * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
+ * @step_duration: step duration for the DTS
+ */
+struct iwl_ext_dts_measurement_cmd {
+	__le32 control_mode;
+	__le32 temperature;
+	__le32 sensor;
+	__le32 avg_factor;
+	__le32 bit_mode;
+	__le32 step_duration;
+} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */
+
+/**
+ * struct iwl_dts_measurement_notif_v1 - measurements notification
+ *
+ * @temp: the measured temperature
+ * @voltage: the measured voltage
+ */
+struct iwl_dts_measurement_notif_v1 {
+	__le32 temp;
+	__le32 voltage;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/
+
+/**
+ * struct iwl_dts_measurement_notif_v2 - measurements notification
+ *
+ * @temp: the measured temperature
+ * @voltage: the measured voltage
+ * @threshold_idx: the trip index that was crossed
+ */
+struct iwl_dts_measurement_notif_v2 {
+	__le32 temp;
+	__le32 voltage;
+	__le32 threshold_idx;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */
+
+/**
+ * struct iwl_dts_measurement_resp - measurements response
+ *
+ * @temp: the measured temperature
+ */
+struct iwl_dts_measurement_resp {
+	__le32 temp;
+} __packed; /* CMD_DTS_MEASUREMENT_RSP_API_S_VER_1 */
+
+/**
+ * struct ct_kill_notif - CT-kill entry notification
+ * This structure represent both versions of this notification.
+ *
+ * @temperature: the current temperature in celsius
+ * @dts: only in v2: DTS that trigger the CT Kill bitmap:
+ *			bit 0: ToP master
+ *			bit 1: PA chain A master
+ *			bit 2: PA chain B master
+ *			bit 3: ToP slave
+ *			bit 4: PA chain A slave
+ *			bit 5: PA chain B slave)
+ *			bits 6,7: reserved (set to 0)
+ * @scheme: only for v2: scheme that trigger the CT Kill (0-SW, 1-HW)
+ */
+struct ct_kill_notif {
+	__le16 temperature;
+	u8 dts;
+	u8 scheme;
+} __packed; /* CT_KILL_NOTIFICATION_API_S_VER_1, CT_KILL_NOTIFICATION_API_S_VER_2 */
+
+/**
+* enum ctdp_cmd_operation - CTDP command operations
+* @CTDP_CMD_OPERATION_START: update the current budget
+* @CTDP_CMD_OPERATION_STOP: stop ctdp
+* @CTDP_CMD_OPERATION_REPORT: get the average budget
+*/
+enum iwl_mvm_ctdp_cmd_operation {
+	CTDP_CMD_OPERATION_START	= 0x1,
+	CTDP_CMD_OPERATION_STOP		= 0x2,
+	CTDP_CMD_OPERATION_REPORT	= 0x4,
+};/* CTDP_CMD_OPERATION_TYPE_E */
+
+/**
+ * struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget
+ *
+ * @operation: see &enum iwl_mvm_ctdp_cmd_operation
+ * @budget: the budget in milliwatt
+ * @window_size: defined in API but not used
+ */
+struct iwl_mvm_ctdp_cmd {
+	__le32 operation;
+	__le32 budget;
+	__le32 window_size;
+} __packed;
+
+#define IWL_MAX_DTS_TRIPS	8
+
+/**
+ * struct temp_report_ths_cmd - set temperature thresholds
+ *
+ * @num_temps: number of temperature thresholds passed
+ * @thresholds: array with the thresholds to be configured
+ */
+struct temp_report_ths_cmd {
+	__le32 num_temps;
+	__le16 thresholds[IWL_MAX_DTS_TRIPS];
+} __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */
+
+#endif /* __iwl_fw_api_phy_h__ */