Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1633 insertions, 0 deletions

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
new file mode 100644
index 000000000..9a9cfd0ce
--- /dev/null
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -0,0 +1,1633 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+	Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+	Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
+	<http://rt2x00.serialmonkey.com>
+
+ */
+
+/*
+	Module: rt2x00lib
+	Abstract: rt2x00 generic device routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+
+#include "rt2x00.h"
+#include "rt2x00lib.h"
+
+/*
+ * Utility functions.
+ */
+u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev,
+			 struct ieee80211_vif *vif)
+{
+	/*
+	 * When in STA mode, bssidx is always 0 otherwise local_address[5]
+	 * contains the bss number, see BSS_ID_MASK comments for details.
+	 */
+	if (rt2x00dev->intf_sta_count)
+		return 0;
+	return vif->addr[5] & (rt2x00dev->ops->max_ap_intf - 1);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_get_bssidx);
+
+/*
+ * Radio control handlers.
+ */
+int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	int status;
+
+	/*
+	 * Don't enable the radio twice.
+	 * And check if the hardware button has been disabled.
+	 */
+	if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return 0;
+
+	/*
+	 * Initialize all data queues.
+	 */
+	rt2x00queue_init_queues(rt2x00dev);
+
+	/*
+	 * Enable radio.
+	 */
+	status =
+	    rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON);
+	if (status)
+		return status;
+
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON);
+
+	rt2x00leds_led_radio(rt2x00dev, true);
+	rt2x00led_led_activity(rt2x00dev, true);
+
+	set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
+
+	/*
+	 * Enable queues.
+	 */
+	rt2x00queue_start_queues(rt2x00dev);
+	rt2x00link_start_tuner(rt2x00dev);
+
+	/*
+	 * Start watchdog monitoring.
+	 */
+	rt2x00link_start_watchdog(rt2x00dev);
+
+	return 0;
+}
+
+void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return;
+
+	/*
+	 * Stop watchdog monitoring.
+	 */
+	rt2x00link_stop_watchdog(rt2x00dev);
+
+	/*
+	 * Stop all queues
+	 */
+	rt2x00link_stop_tuner(rt2x00dev);
+	rt2x00queue_stop_queues(rt2x00dev);
+	rt2x00queue_flush_queues(rt2x00dev, true);
+
+	/*
+	 * Disable radio.
+	 */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
+	rt2x00led_led_activity(rt2x00dev, false);
+	rt2x00leds_led_radio(rt2x00dev, false);
+}
+
+static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
+					  struct ieee80211_vif *vif)
+{
+	struct rt2x00_dev *rt2x00dev = data;
+	struct rt2x00_intf *intf = vif_to_intf(vif);
+
+	/*
+	 * It is possible the radio was disabled while the work had been
+	 * scheduled. If that happens we should return here immediately,
+	 * note that in the spinlock protected area above the delayed_flags
+	 * have been cleared correctly.
+	 */
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return;
+
+	if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags)) {
+		mutex_lock(&intf->beacon_skb_mutex);
+		rt2x00queue_update_beacon(rt2x00dev, vif);
+		mutex_unlock(&intf->beacon_skb_mutex);
+	}
+}
+
+static void rt2x00lib_intf_scheduled(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, intf_work);
+
+	/*
+	 * Iterate over each interface and perform the
+	 * requested configurations.
+	 */
+	ieee80211_iterate_active_interfaces(rt2x00dev->hw,
+					    IEEE80211_IFACE_ITER_RESUME_ALL,
+					    rt2x00lib_intf_scheduled_iter,
+					    rt2x00dev);
+}
+
+static void rt2x00lib_autowakeup(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, autowakeup_work.work);
+
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return;
+
+	if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
+		rt2x00_err(rt2x00dev, "Device failed to wakeup\n");
+	clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
+}
+
+/*
+ * Interrupt context handlers.
+ */
+static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac,
+				     struct ieee80211_vif *vif)
+{
+	struct ieee80211_tx_control control = {};
+	struct rt2x00_dev *rt2x00dev = data;
+	struct sk_buff *skb;
+
+	/*
+	 * Only AP mode interfaces do broad- and multicast buffering
+	 */
+	if (vif->type != NL80211_IFTYPE_AP)
+		return;
+
+	/*
+	 * Send out buffered broad- and multicast frames
+	 */
+	skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+	while (skb) {
+		rt2x00mac_tx(rt2x00dev->hw, &control, skb);
+		skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
+	}
+}
+
+static void rt2x00lib_beaconupdate_iter(void *data, u8 *mac,
+					struct ieee80211_vif *vif)
+{
+	struct rt2x00_dev *rt2x00dev = data;
+
+	if (vif->type != NL80211_IFTYPE_AP &&
+	    vif->type != NL80211_IFTYPE_ADHOC &&
+	    vif->type != NL80211_IFTYPE_MESH_POINT)
+		return;
+
+	/*
+	 * Update the beacon without locking. This is safe on PCI devices
+	 * as they only update the beacon periodically here. This should
+	 * never be called for USB devices.
+	 */
+	WARN_ON(rt2x00_is_usb(rt2x00dev));
+	rt2x00queue_update_beacon(rt2x00dev, vif);
+}
+
+void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
+{
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return;
+
+	/* send buffered bc/mc frames out for every bssid */
+	ieee80211_iterate_active_interfaces_atomic(
+		rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+		rt2x00lib_bc_buffer_iter, rt2x00dev);
+	/*
+	 * Devices with pre tbtt interrupt don't need to update the beacon
+	 * here as they will fetch the next beacon directly prior to
+	 * transmission.
+	 */
+	if (rt2x00_has_cap_pre_tbtt_interrupt(rt2x00dev))
+		return;
+
+	/* fetch next beacon */
+	ieee80211_iterate_active_interfaces_atomic(
+		rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+		rt2x00lib_beaconupdate_iter, rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
+
+void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev)
+{
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return;
+
+	/* fetch next beacon */
+	ieee80211_iterate_active_interfaces_atomic(
+		rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+		rt2x00lib_beaconupdate_iter, rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt);
+
+void rt2x00lib_dmastart(struct queue_entry *entry)
+{
+	set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+	rt2x00queue_index_inc(entry, Q_INDEX);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_dmastart);
+
+void rt2x00lib_dmadone(struct queue_entry *entry)
+{
+	set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
+	clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+	rt2x00queue_index_inc(entry, Q_INDEX_DMA_DONE);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_dmadone);
+
+static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct ieee80211_bar *bar = (void *) entry->skb->data;
+	struct rt2x00_bar_list_entry *bar_entry;
+	int ret;
+
+	if (likely(!ieee80211_is_back_req(bar->frame_control)))
+		return 0;
+
+	/*
+	 * Unlike all other frames, the status report for BARs does
+	 * not directly come from the hardware as it is incapable of
+	 * matching a BA to a previously send BAR. The hardware will
+	 * report all BARs as if they weren't acked at all.
+	 *
+	 * Instead the RX-path will scan for incoming BAs and set the
+	 * block_acked flag if it sees one that was likely caused by
+	 * a BAR from us.
+	 *
+	 * Remove remaining BARs here and return their status for
+	 * TX done processing.
+	 */
+	ret = 0;
+	rcu_read_lock();
+	list_for_each_entry_rcu(bar_entry, &rt2x00dev->bar_list, list) {
+		if (bar_entry->entry != entry)
+			continue;
+
+		spin_lock_bh(&rt2x00dev->bar_list_lock);
+		/* Return whether this BAR was blockacked or not */
+		ret = bar_entry->block_acked;
+		/* Remove the BAR from our checklist */
+		list_del_rcu(&bar_entry->list);
+		spin_unlock_bh(&rt2x00dev->bar_list_lock);
+		kfree_rcu(bar_entry, head);
+
+		break;
+	}
+	rcu_read_unlock();
+
+	return ret;
+}
+
+static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
+				     struct ieee80211_tx_info *tx_info,
+				     struct skb_frame_desc *skbdesc,
+				     struct txdone_entry_desc *txdesc,
+				     bool success)
+{
+	u8 rate_idx, rate_flags, retry_rates;
+	int i;
+
+	rate_idx = skbdesc->tx_rate_idx;
+	rate_flags = skbdesc->tx_rate_flags;
+	retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ?
+	    (txdesc->retry + 1) : 1;
+
+	/*
+	 * Initialize TX status
+	 */
+	memset(&tx_info->status, 0, sizeof(tx_info->status));
+	tx_info->status.ack_signal = 0;
+
+	/*
+	 * Frame was send with retries, hardware tried
+	 * different rates to send out the frame, at each
+	 * retry it lowered the rate 1 step except when the
+	 * lowest rate was used.
+	 */
+	for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
+		tx_info->status.rates[i].idx = rate_idx - i;
+		tx_info->status.rates[i].flags = rate_flags;
+
+		if (rate_idx - i == 0) {
+			/*
+			 * The lowest rate (index 0) was used until the
+			 * number of max retries was reached.
+			 */
+			tx_info->status.rates[i].count = retry_rates - i;
+			i++;
+			break;
+		}
+		tx_info->status.rates[i].count = 1;
+	}
+	if (i < (IEEE80211_TX_MAX_RATES - 1))
+		tx_info->status.rates[i].idx = -1; /* terminate */
+
+	if (test_bit(TXDONE_NO_ACK_REQ, &txdesc->flags))
+		tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
+
+	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+		if (success)
+			tx_info->flags |= IEEE80211_TX_STAT_ACK;
+		else
+			rt2x00dev->low_level_stats.dot11ACKFailureCount++;
+	}
+
+	/*
+	 * Every single frame has it's own tx status, hence report
+	 * every frame as ampdu of size 1.
+	 *
+	 * TODO: if we can find out how many frames were aggregated
+	 * by the hw we could provide the real ampdu_len to mac80211
+	 * which would allow the rc algorithm to better decide on
+	 * which rates are suitable.
+	 */
+	if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
+	    tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+		tx_info->flags |= IEEE80211_TX_STAT_AMPDU |
+				  IEEE80211_TX_CTL_AMPDU;
+		tx_info->status.ampdu_len = 1;
+		tx_info->status.ampdu_ack_len = success ? 1 : 0;
+	}
+
+	if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+		if (success)
+			rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
+		else
+			rt2x00dev->low_level_stats.dot11RTSFailureCount++;
+	}
+}
+
+static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev,
+				  struct queue_entry *entry)
+{
+	/*
+	 * Make this entry available for reuse.
+	 */
+	entry->skb = NULL;
+	entry->flags = 0;
+
+	rt2x00dev->ops->lib->clear_entry(entry);
+
+	rt2x00queue_index_inc(entry, Q_INDEX_DONE);
+
+	/*
+	 * If the data queue was below the threshold before the txdone
+	 * handler we must make sure the packet queue in the mac80211 stack
+	 * is reenabled when the txdone handler has finished. This has to be
+	 * serialized with rt2x00mac_tx(), otherwise we can wake up queue
+	 * before it was stopped.
+	 */
+	spin_lock_bh(&entry->queue->tx_lock);
+	if (!rt2x00queue_threshold(entry->queue))
+		rt2x00queue_unpause_queue(entry->queue);
+	spin_unlock_bh(&entry->queue->tx_lock);
+}
+
+void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
+			      struct txdone_entry_desc *txdesc)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	struct ieee80211_tx_info txinfo = {};
+	bool success;
+
+	/*
+	 * Unmap the skb.
+	 */
+	rt2x00queue_unmap_skb(entry);
+
+	/*
+	 * Signal that the TX descriptor is no longer in the skb.
+	 */
+	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
+
+	/*
+	 * Send frame to debugfs immediately, after this call is completed
+	 * we are going to overwrite the skb->cb array.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
+
+	/*
+	 * Determine if the frame has been successfully transmitted and
+	 * remove BARs from our check list while checking for their
+	 * TX status.
+	 */
+	success =
+	    rt2x00lib_txdone_bar_status(entry) ||
+	    test_bit(TXDONE_SUCCESS, &txdesc->flags);
+
+	if (!test_bit(TXDONE_UNKNOWN, &txdesc->flags)) {
+		/*
+		 * Update TX statistics.
+		 */
+		rt2x00dev->link.qual.tx_success += success;
+		rt2x00dev->link.qual.tx_failed += !success;
+
+		rt2x00lib_fill_tx_status(rt2x00dev, &txinfo, skbdesc, txdesc,
+					 success);
+		ieee80211_tx_status_noskb(rt2x00dev->hw, skbdesc->sta, &txinfo);
+	}
+
+	dev_kfree_skb_any(entry->skb);
+	rt2x00lib_clear_entry(rt2x00dev, entry);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_nomatch);
+
+void rt2x00lib_txdone(struct queue_entry *entry,
+		      struct txdone_entry_desc *txdesc)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	u8 skbdesc_flags = skbdesc->flags;
+	unsigned int header_length;
+	bool success;
+
+	/*
+	 * Unmap the skb.
+	 */
+	rt2x00queue_unmap_skb(entry);
+
+	/*
+	 * Remove the extra tx headroom from the skb.
+	 */
+	skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
+
+	/*
+	 * Signal that the TX descriptor is no longer in the skb.
+	 */
+	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
+
+	/*
+	 * Determine the length of 802.11 header.
+	 */
+	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+	/*
+	 * Remove L2 padding which was added during
+	 */
+	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
+		rt2x00queue_remove_l2pad(entry->skb, header_length);
+
+	/*
+	 * If the IV/EIV data was stripped from the frame before it was
+	 * passed to the hardware, we should now reinsert it again because
+	 * mac80211 will expect the same data to be present it the
+	 * frame as it was passed to us.
+	 */
+	if (rt2x00_has_cap_hw_crypto(rt2x00dev))
+		rt2x00crypto_tx_insert_iv(entry->skb, header_length);
+
+	/*
+	 * Send frame to debugfs immediately, after this call is completed
+	 * we are going to overwrite the skb->cb array.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
+
+	/*
+	 * Determine if the frame has been successfully transmitted and
+	 * remove BARs from our check list while checking for their
+	 * TX status.
+	 */
+	success =
+	    rt2x00lib_txdone_bar_status(entry) ||
+	    test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+	    test_bit(TXDONE_UNKNOWN, &txdesc->flags);
+
+	/*
+	 * Update TX statistics.
+	 */
+	rt2x00dev->link.qual.tx_success += success;
+	rt2x00dev->link.qual.tx_failed += !success;
+
+	rt2x00lib_fill_tx_status(rt2x00dev, tx_info, skbdesc, txdesc, success);
+
+	/*
+	 * Only send the status report to mac80211 when it's a frame
+	 * that originated in mac80211. If this was a extra frame coming
+	 * through a mac80211 library call (RTS/CTS) then we should not
+	 * send the status report back.
+	 */
+	if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
+		if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TASKLET_CONTEXT))
+			ieee80211_tx_status(rt2x00dev->hw, entry->skb);
+		else
+			ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
+	} else {
+		dev_kfree_skb_any(entry->skb);
+	}
+
+	rt2x00lib_clear_entry(rt2x00dev, entry);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
+
+void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
+{
+	struct txdone_entry_desc txdesc;
+
+	txdesc.flags = 0;
+	__set_bit(status, &txdesc.flags);
+	txdesc.retry = 0;
+
+	rt2x00lib_txdone(entry, &txdesc);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
+
+static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
+{
+	struct ieee80211_mgmt *mgmt = (void *)data;
+	u8 *pos, *end;
+
+	pos = (u8 *)mgmt->u.beacon.variable;
+	end = data + len;
+	while (pos < end) {
+		if (pos + 2 + pos[1] > end)
+			return NULL;
+
+		if (pos[0] == ie)
+			return pos;
+
+		pos += 2 + pos[1];
+	}
+
+	return NULL;
+}
+
+static void rt2x00lib_sleep(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, sleep_work);
+
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return;
+
+	/*
+	 * Check again is powersaving is enabled, to prevent races from delayed
+	 * work execution.
+	 */
+	if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+		rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+				 IEEE80211_CONF_CHANGE_PS);
+}
+
+static void rt2x00lib_rxdone_check_ba(struct rt2x00_dev *rt2x00dev,
+				      struct sk_buff *skb,
+				      struct rxdone_entry_desc *rxdesc)
+{
+	struct rt2x00_bar_list_entry *entry;
+	struct ieee80211_bar *ba = (void *)skb->data;
+
+	if (likely(!ieee80211_is_back(ba->frame_control)))
+		return;
+
+	if (rxdesc->size < sizeof(*ba) + FCS_LEN)
+		return;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(entry, &rt2x00dev->bar_list, list) {
+
+		if (ba->start_seq_num != entry->start_seq_num)
+			continue;
+
+#define TID_CHECK(a, b) (						\
+	((a) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)) ==	\
+	((b) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)))		\
+
+		if (!TID_CHECK(ba->control, entry->control))
+			continue;
+
+#undef TID_CHECK
+
+		if (!ether_addr_equal_64bits(ba->ra, entry->ta))
+			continue;
+
+		if (!ether_addr_equal_64bits(ba->ta, entry->ra))
+			continue;
+
+		/* Mark BAR since we received the according BA */
+		spin_lock_bh(&rt2x00dev->bar_list_lock);
+		entry->block_acked = 1;
+		spin_unlock_bh(&rt2x00dev->bar_list_lock);
+		break;
+	}
+	rcu_read_unlock();
+
+}
+
+static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
+				      struct sk_buff *skb,
+				      struct rxdone_entry_desc *rxdesc)
+{
+	struct ieee80211_hdr *hdr = (void *) skb->data;
+	struct ieee80211_tim_ie *tim_ie;
+	u8 *tim;
+	u8 tim_len;
+	bool cam;
+
+	/* If this is not a beacon, or if mac80211 has no powersaving
+	 * configured, or if the device is already in powersaving mode
+	 * we can exit now. */
+	if (likely(!ieee80211_is_beacon(hdr->frame_control) ||
+		   !(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS)))
+		return;
+
+	/* min. beacon length + FCS_LEN */
+	if (skb->len <= 40 + FCS_LEN)
+		return;
+
+	/* and only beacons from the associated BSSID, please */
+	if (!(rxdesc->dev_flags & RXDONE_MY_BSS) ||
+	    !rt2x00dev->aid)
+		return;
+
+	rt2x00dev->last_beacon = jiffies;
+
+	tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM);
+	if (!tim)
+		return;
+
+	if (tim[1] < sizeof(*tim_ie))
+		return;
+
+	tim_len = tim[1];
+	tim_ie = (struct ieee80211_tim_ie *) &tim[2];
+
+	/* Check whenever the PHY can be turned off again. */
+
+	/* 1. What about buffered unicast traffic for our AID? */
+	cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid);
+
+	/* 2. Maybe the AP wants to send multicast/broadcast data? */
+	cam |= (tim_ie->bitmap_ctrl & 0x01);
+
+	if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+		queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
+}
+
+static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
+					struct rxdone_entry_desc *rxdesc)
+{
+	struct ieee80211_supported_band *sband;
+	const struct rt2x00_rate *rate;
+	unsigned int i;
+	int signal = rxdesc->signal;
+	int type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
+
+	switch (rxdesc->rate_mode) {
+	case RATE_MODE_CCK:
+	case RATE_MODE_OFDM:
+		/*
+		 * For non-HT rates the MCS value needs to contain the
+		 * actually used rate modulation (CCK or OFDM).
+		 */
+		if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
+			signal = RATE_MCS(rxdesc->rate_mode, signal);
+
+		sband = &rt2x00dev->bands[rt2x00dev->curr_band];
+		for (i = 0; i < sband->n_bitrates; i++) {
+			rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
+			if (((type == RXDONE_SIGNAL_PLCP) &&
+			     (rate->plcp == signal)) ||
+			    ((type == RXDONE_SIGNAL_BITRATE) &&
+			      (rate->bitrate == signal)) ||
+			    ((type == RXDONE_SIGNAL_MCS) &&
+			      (rate->mcs == signal))) {
+				return i;
+			}
+		}
+		break;
+	case RATE_MODE_HT_MIX:
+	case RATE_MODE_HT_GREENFIELD:
+		if (signal >= 0 && signal <= 76)
+			return signal;
+		break;
+	default:
+		break;
+	}
+
+	rt2x00_warn(rt2x00dev, "Frame received with unrecognized signal, mode=0x%.4x, signal=0x%.4x, type=%d\n",
+		    rxdesc->rate_mode, signal, type);
+	return 0;
+}
+
+void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct rxdone_entry_desc rxdesc;
+	struct sk_buff *skb;
+	struct ieee80211_rx_status *rx_status;
+	unsigned int header_length;
+	int rate_idx;
+
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+	    !test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		goto submit_entry;
+
+	if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+		goto submit_entry;
+
+	/*
+	 * Allocate a new sk_buffer. If no new buffer available, drop the
+	 * received frame and reuse the existing buffer.
+	 */
+	skb = rt2x00queue_alloc_rxskb(entry, gfp);
+	if (!skb)
+		goto submit_entry;
+
+	/*
+	 * Unmap the skb.
+	 */
+	rt2x00queue_unmap_skb(entry);
+
+	/*
+	 * Extract the RXD details.
+	 */
+	memset(&rxdesc, 0, sizeof(rxdesc));
+	rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
+
+	/*
+	 * Check for valid size in case we get corrupted descriptor from
+	 * hardware.
+	 */
+	if (unlikely(rxdesc.size == 0 ||
+		     rxdesc.size > entry->queue->data_size)) {
+		rt2x00_err(rt2x00dev, "Wrong frame size %d max %d\n",
+			   rxdesc.size, entry->queue->data_size);
+		dev_kfree_skb(entry->skb);
+		goto renew_skb;
+	}
+
+	/*
+	 * The data behind the ieee80211 header must be
+	 * aligned on a 4 byte boundary.
+	 */
+	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+	/*
+	 * Hardware might have stripped the IV/EIV/ICV data,
+	 * in that case it is possible that the data was
+	 * provided separately (through hardware descriptor)
+	 * in which case we should reinsert the data into the frame.
+	 */
+	if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
+	    (rxdesc.flags & RX_FLAG_IV_STRIPPED))
+		rt2x00crypto_rx_insert_iv(entry->skb, header_length,
+					  &rxdesc);
+	else if (header_length &&
+		 (rxdesc.size > header_length) &&
+		 (rxdesc.dev_flags & RXDONE_L2PAD))
+		rt2x00queue_remove_l2pad(entry->skb, header_length);
+
+	/* Trim buffer to correct size */
+	skb_trim(entry->skb, rxdesc.size);
+
+	/*
+	 * Translate the signal to the correct bitrate index.
+	 */
+	rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
+	if (rxdesc.rate_mode == RATE_MODE_HT_MIX ||
+	    rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD)
+		rxdesc.encoding = RX_ENC_HT;
+
+	/*
+	 * Check if this is a beacon, and more frames have been
+	 * buffered while we were in powersaving mode.
+	 */
+	rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc);
+
+	/*
+	 * Check for incoming BlockAcks to match to the BlockAckReqs
+	 * we've send out.
+	 */
+	rt2x00lib_rxdone_check_ba(rt2x00dev, entry->skb, &rxdesc);
+
+	/*
+	 * Update extra components
+	 */
+	rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
+	rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry);
+
+	/*
+	 * Initialize RX status information, and send frame
+	 * to mac80211.
+	 */
+	rx_status = IEEE80211_SKB_RXCB(entry->skb);
+
+	/* Ensure that all fields of rx_status are initialized
+	 * properly. The skb->cb array was used for driver
+	 * specific informations, so rx_status might contain
+	 * garbage.
+	 */
+	memset(rx_status, 0, sizeof(*rx_status));
+
+	rx_status->mactime = rxdesc.timestamp;
+	rx_status->band = rt2x00dev->curr_band;
+	rx_status->freq = rt2x00dev->curr_freq;
+	rx_status->rate_idx = rate_idx;
+	rx_status->signal = rxdesc.rssi;
+	rx_status->flag = rxdesc.flags;
+	rx_status->enc_flags = rxdesc.enc_flags;
+	rx_status->encoding = rxdesc.encoding;
+	rx_status->bw = rxdesc.bw;
+	rx_status->antenna = rt2x00dev->link.ant.active.rx;
+
+	ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
+
+renew_skb:
+	/*
+	 * Replace the skb with the freshly allocated one.
+	 */
+	entry->skb = skb;
+
+submit_entry:
+	entry->flags = 0;
+	rt2x00queue_index_inc(entry, Q_INDEX_DONE);
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+	    test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		rt2x00dev->ops->lib->clear_entry(entry);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
+
+/*
+ * Driver initialization handlers.
+ */
+const struct rt2x00_rate rt2x00_supported_rates[12] = {
+	{
+		.flags = DEV_RATE_CCK,
+		.bitrate = 10,
+		.ratemask = BIT(0),
+		.plcp = 0x00,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 0),
+	},
+	{
+		.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
+		.bitrate = 20,
+		.ratemask = BIT(1),
+		.plcp = 0x01,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 1),
+	},
+	{
+		.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
+		.bitrate = 55,
+		.ratemask = BIT(2),
+		.plcp = 0x02,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 2),
+	},
+	{
+		.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
+		.bitrate = 110,
+		.ratemask = BIT(3),
+		.plcp = 0x03,
+		.mcs = RATE_MCS(RATE_MODE_CCK, 3),
+	},
+	{
+		.flags = DEV_RATE_OFDM,
+		.bitrate = 60,
+		.ratemask = BIT(4),
+		.plcp = 0x0b,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 0),
+	},
+	{
+		.flags = DEV_RATE_OFDM,
+		.bitrate = 90,
+		.ratemask = BIT(5),
+		.plcp = 0x0f,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 1),
+	},
+	{
+		.flags = DEV_RATE_OFDM,
+		.bitrate = 120,
+		.ratemask = BIT(6),
+		.plcp = 0x0a,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 2),
+	},
+	{
+		.flags = DEV_RATE_OFDM,
+		.bitrate = 180,
+		.ratemask = BIT(7),
+		.plcp = 0x0e,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 3),
+	},
+	{
+		.flags = DEV_RATE_OFDM,
+		.bitrate = 240,
+		.ratemask = BIT(8),
+		.plcp = 0x09,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 4),
+	},
+	{
+		.flags = DEV_RATE_OFDM,
+		.bitrate = 360,
+		.ratemask = BIT(9),
+		.plcp = 0x0d,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 5),
+	},
+	{
+		.flags = DEV_RATE_OFDM,
+		.bitrate = 480,
+		.ratemask = BIT(10),
+		.plcp = 0x08,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 6),
+	},
+	{
+		.flags = DEV_RATE_OFDM,
+		.bitrate = 540,
+		.ratemask = BIT(11),
+		.plcp = 0x0c,
+		.mcs = RATE_MCS(RATE_MODE_OFDM, 7),
+	},
+};
+
+static void rt2x00lib_channel(struct ieee80211_channel *entry,
+			      const int channel, const int tx_power,
+			      const int value)
+{
+	/* XXX: this assumption about the band is wrong for 802.11j */
+	entry->band = channel <= 14 ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ;
+	entry->center_freq = ieee80211_channel_to_frequency(channel,
+							    entry->band);
+	entry->hw_value = value;
+	entry->max_power = tx_power;
+	entry->max_antenna_gain = 0xff;
+}
+
+static void rt2x00lib_rate(struct ieee80211_rate *entry,
+			   const u16 index, const struct rt2x00_rate *rate)
+{
+	entry->flags = 0;
+	entry->bitrate = rate->bitrate;
+	entry->hw_value = index;
+	entry->hw_value_short = index;
+
+	if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
+		entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
+}
+
+void rt2x00lib_set_mac_address(struct rt2x00_dev *rt2x00dev, u8 *eeprom_mac_addr)
+{
+	of_get_mac_address(rt2x00dev->dev->of_node, eeprom_mac_addr);
+
+	if (!is_valid_ether_addr(eeprom_mac_addr)) {
+		eth_random_addr(eeprom_mac_addr);
+		rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", eeprom_mac_addr);
+	}
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_set_mac_address);
+
+static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
+				    struct hw_mode_spec *spec)
+{
+	struct ieee80211_hw *hw = rt2x00dev->hw;
+	struct ieee80211_channel *channels;
+	struct ieee80211_rate *rates;
+	unsigned int num_rates;
+	unsigned int i;
+
+	num_rates = 0;
+	if (spec->supported_rates & SUPPORT_RATE_CCK)
+		num_rates += 4;
+	if (spec->supported_rates & SUPPORT_RATE_OFDM)
+		num_rates += 8;
+
+	channels = kcalloc(spec->num_channels, sizeof(*channels), GFP_KERNEL);
+	if (!channels)
+		return -ENOMEM;
+
+	rates = kcalloc(num_rates, sizeof(*rates), GFP_KERNEL);
+	if (!rates)
+		goto exit_free_channels;
+
+	/*
+	 * Initialize Rate list.
+	 */
+	for (i = 0; i < num_rates; i++)
+		rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
+
+	/*
+	 * Initialize Channel list.
+	 */
+	for (i = 0; i < spec->num_channels; i++) {
+		rt2x00lib_channel(&channels[i],
+				  spec->channels[i].channel,
+				  spec->channels_info[i].max_power, i);
+	}
+
+	/*
+	 * Intitialize 802.11b, 802.11g
+	 * Rates: CCK, OFDM.
+	 * Channels: 2.4 GHz
+	 */
+	if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
+		rt2x00dev->bands[NL80211_BAND_2GHZ].n_channels = 14;
+		rt2x00dev->bands[NL80211_BAND_2GHZ].n_bitrates = num_rates;
+		rt2x00dev->bands[NL80211_BAND_2GHZ].channels = channels;
+		rt2x00dev->bands[NL80211_BAND_2GHZ].bitrates = rates;
+		hw->wiphy->bands[NL80211_BAND_2GHZ] =
+		    &rt2x00dev->bands[NL80211_BAND_2GHZ];
+		memcpy(&rt2x00dev->bands[NL80211_BAND_2GHZ].ht_cap,
+		       &spec->ht, sizeof(spec->ht));
+	}
+
+	/*
+	 * Intitialize 802.11a
+	 * Rates: OFDM.
+	 * Channels: OFDM, UNII, HiperLAN2.
+	 */
+	if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
+		rt2x00dev->bands[NL80211_BAND_5GHZ].n_channels =
+		    spec->num_channels - 14;
+		rt2x00dev->bands[NL80211_BAND_5GHZ].n_bitrates =
+		    num_rates - 4;
+		rt2x00dev->bands[NL80211_BAND_5GHZ].channels = &channels[14];
+		rt2x00dev->bands[NL80211_BAND_5GHZ].bitrates = &rates[4];
+		hw->wiphy->bands[NL80211_BAND_5GHZ] =
+		    &rt2x00dev->bands[NL80211_BAND_5GHZ];
+		memcpy(&rt2x00dev->bands[NL80211_BAND_5GHZ].ht_cap,
+		       &spec->ht, sizeof(spec->ht));
+	}
+
+	return 0;
+
+ exit_free_channels:
+	kfree(channels);
+	rt2x00_err(rt2x00dev, "Allocation ieee80211 modes failed\n");
+	return -ENOMEM;
+}
+
+static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
+{
+	if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
+		ieee80211_unregister_hw(rt2x00dev->hw);
+
+	if (likely(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ])) {
+		kfree(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels);
+		kfree(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ]->bitrates);
+		rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL;
+		rt2x00dev->hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL;
+	}
+
+	kfree(rt2x00dev->spec.channels_info);
+	kfree(rt2x00dev->chan_survey);
+}
+
+static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = {
+	{ .throughput = 0 * 1024, .blink_time = 334 },
+	{ .throughput = 1 * 1024, .blink_time = 260 },
+	{ .throughput = 2 * 1024, .blink_time = 220 },
+	{ .throughput = 5 * 1024, .blink_time = 190 },
+	{ .throughput = 10 * 1024, .blink_time = 170 },
+	{ .throughput = 25 * 1024, .blink_time = 150 },
+	{ .throughput = 54 * 1024, .blink_time = 130 },
+	{ .throughput = 120 * 1024, .blink_time = 110 },
+	{ .throughput = 265 * 1024, .blink_time = 80 },
+	{ .throughput = 586 * 1024, .blink_time = 50 },
+};
+
+static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+	struct hw_mode_spec *spec = &rt2x00dev->spec;
+	int status;
+
+	if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
+		return 0;
+
+	/*
+	 * Initialize HW modes.
+	 */
+	status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
+	if (status)
+		return status;
+
+	/*
+	 * Initialize HW fields.
+	 */
+	rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues;
+
+	/*
+	 * Initialize extra TX headroom required.
+	 */
+	rt2x00dev->hw->extra_tx_headroom =
+		max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
+		      rt2x00dev->extra_tx_headroom);
+
+	/*
+	 * Take TX headroom required for alignment into account.
+	 */
+	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
+		rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
+	else if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA))
+		rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
+
+	/*
+	 * Tell mac80211 about the size of our private STA structure.
+	 */
+	rt2x00dev->hw->sta_data_size = sizeof(struct rt2x00_sta);
+
+	/*
+	 * Allocate tx status FIFO for driver use.
+	 */
+	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TXSTATUS_FIFO)) {
+		/*
+		 * Allocate the txstatus fifo. In the worst case the tx
+		 * status fifo has to hold the tx status of all entries
+		 * in all tx queues. Hence, calculate the kfifo size as
+		 * tx_queues * entry_num and round up to the nearest
+		 * power of 2.
+		 */
+		int kfifo_size =
+			roundup_pow_of_two(rt2x00dev->ops->tx_queues *
+					   rt2x00dev->tx->limit *
+					   sizeof(u32));
+
+		status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size,
+				     GFP_KERNEL);
+		if (status)
+			return status;
+	}
+
+	/*
+	 * Initialize tasklets if used by the driver. Tasklets are
+	 * disabled until the interrupts are turned on. The driver
+	 * has to handle that.
+	 */
+#define RT2X00_TASKLET_INIT(taskletname) \
+	if (rt2x00dev->ops->lib->taskletname) { \
+		tasklet_setup(&rt2x00dev->taskletname, \
+			     rt2x00dev->ops->lib->taskletname); \
+	}
+
+	RT2X00_TASKLET_INIT(txstatus_tasklet);
+	RT2X00_TASKLET_INIT(pretbtt_tasklet);
+	RT2X00_TASKLET_INIT(tbtt_tasklet);
+	RT2X00_TASKLET_INIT(rxdone_tasklet);
+	RT2X00_TASKLET_INIT(autowake_tasklet);
+
+#undef RT2X00_TASKLET_INIT
+
+	ieee80211_create_tpt_led_trigger(rt2x00dev->hw,
+					 IEEE80211_TPT_LEDTRIG_FL_RADIO,
+					 rt2x00_tpt_blink,
+					 ARRAY_SIZE(rt2x00_tpt_blink));
+
+	/*
+	 * Register HW.
+	 */
+	status = ieee80211_register_hw(rt2x00dev->hw);
+	if (status)
+		return status;
+
+	set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
+
+	return 0;
+}
+
+/*
+ * Initialization/uninitialization handlers.
+ */
+static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
+{
+	if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
+		return;
+
+	/*
+	 * Stop rfkill polling.
+	 */
+	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL))
+		rt2x00rfkill_unregister(rt2x00dev);
+
+	/*
+	 * Allow the HW to uninitialize.
+	 */
+	rt2x00dev->ops->lib->uninitialize(rt2x00dev);
+
+	/*
+	 * Free allocated queue entries.
+	 */
+	rt2x00queue_uninitialize(rt2x00dev);
+}
+
+static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
+{
+	int status;
+
+	if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
+		return 0;
+
+	/*
+	 * Allocate all queue entries.
+	 */
+	status = rt2x00queue_initialize(rt2x00dev);
+	if (status)
+		return status;
+
+	/*
+	 * Initialize the device.
+	 */
+	status = rt2x00dev->ops->lib->initialize(rt2x00dev);
+	if (status) {
+		rt2x00queue_uninitialize(rt2x00dev);
+		return status;
+	}
+
+	set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
+
+	/*
+	 * Start rfkill polling.
+	 */
+	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL))
+		rt2x00rfkill_register(rt2x00dev);
+
+	return 0;
+}
+
+int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
+{
+	int retval = 0;
+
+	/*
+	 * If this is the first interface which is added,
+	 * we should load the firmware now.
+	 */
+	retval = rt2x00lib_load_firmware(rt2x00dev);
+	if (retval)
+		goto out;
+
+	/*
+	 * Initialize the device.
+	 */
+	retval = rt2x00lib_initialize(rt2x00dev);
+	if (retval)
+		goto out;
+
+	rt2x00dev->intf_ap_count = 0;
+	rt2x00dev->intf_sta_count = 0;
+	rt2x00dev->intf_associated = 0;
+
+	/* Enable the radio */
+	retval = rt2x00lib_enable_radio(rt2x00dev);
+	if (retval)
+		goto out;
+
+	set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
+
+out:
+	return retval;
+}
+
+void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
+{
+	if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
+		return;
+
+	/*
+	 * Perhaps we can add something smarter here,
+	 * but for now just disabling the radio should do.
+	 */
+	rt2x00lib_disable_radio(rt2x00dev);
+
+	rt2x00dev->intf_ap_count = 0;
+	rt2x00dev->intf_sta_count = 0;
+	rt2x00dev->intf_associated = 0;
+}
+
+static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev)
+{
+	struct ieee80211_iface_limit *if_limit;
+	struct ieee80211_iface_combination *if_combination;
+
+	if (rt2x00dev->ops->max_ap_intf < 2)
+		return;
+
+	/*
+	 * Build up AP interface limits structure.
+	 */
+	if_limit = &rt2x00dev->if_limits_ap;
+	if_limit->max = rt2x00dev->ops->max_ap_intf;
+	if_limit->types = BIT(NL80211_IFTYPE_AP);
+#ifdef CONFIG_MAC80211_MESH
+	if_limit->types |= BIT(NL80211_IFTYPE_MESH_POINT);
+#endif
+
+	/*
+	 * Build up AP interface combinations structure.
+	 */
+	if_combination = &rt2x00dev->if_combinations[IF_COMB_AP];
+	if_combination->limits = if_limit;
+	if_combination->n_limits = 1;
+	if_combination->max_interfaces = if_limit->max;
+	if_combination->num_different_channels = 1;
+
+	/*
+	 * Finally, specify the possible combinations to mac80211.
+	 */
+	rt2x00dev->hw->wiphy->iface_combinations = rt2x00dev->if_combinations;
+	rt2x00dev->hw->wiphy->n_iface_combinations = 1;
+}
+
+static unsigned int rt2x00dev_extra_tx_headroom(struct rt2x00_dev *rt2x00dev)
+{
+	if (WARN_ON(!rt2x00dev->tx))
+		return 0;
+
+	if (rt2x00_is_usb(rt2x00dev))
+		return rt2x00dev->tx[0].winfo_size + rt2x00dev->tx[0].desc_size;
+
+	return rt2x00dev->tx[0].winfo_size;
+}
+
+/*
+ * driver allocation handlers.
+ */
+int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
+{
+	int retval = -ENOMEM;
+
+	/*
+	 * Set possible interface combinations.
+	 */
+	rt2x00lib_set_if_combinations(rt2x00dev);
+
+	/*
+	 * Allocate the driver data memory, if necessary.
+	 */
+	if (rt2x00dev->ops->drv_data_size > 0) {
+		rt2x00dev->drv_data = kzalloc(rt2x00dev->ops->drv_data_size,
+			                      GFP_KERNEL);
+		if (!rt2x00dev->drv_data) {
+			retval = -ENOMEM;
+			goto exit;
+		}
+	}
+
+	spin_lock_init(&rt2x00dev->irqmask_lock);
+	mutex_init(&rt2x00dev->csr_mutex);
+	mutex_init(&rt2x00dev->conf_mutex);
+	INIT_LIST_HEAD(&rt2x00dev->bar_list);
+	spin_lock_init(&rt2x00dev->bar_list_lock);
+	hrtimer_init(&rt2x00dev->txstatus_timer, CLOCK_MONOTONIC,
+		     HRTIMER_MODE_REL);
+
+	set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+
+	/*
+	 * Make room for rt2x00_intf inside the per-interface
+	 * structure ieee80211_vif.
+	 */
+	rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
+
+	/*
+	 * rt2x00 devices can only use the last n bits of the MAC address
+	 * for virtual interfaces.
+	 */
+	rt2x00dev->hw->wiphy->addr_mask[ETH_ALEN - 1] =
+		(rt2x00dev->ops->max_ap_intf - 1);
+
+	/*
+	 * Initialize work.
+	 */
+	rt2x00dev->workqueue =
+	    alloc_ordered_workqueue("%s", 0, wiphy_name(rt2x00dev->hw->wiphy));
+	if (!rt2x00dev->workqueue) {
+		retval = -ENOMEM;
+		goto exit;
+	}
+
+	INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
+	INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
+	INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
+
+	/*
+	 * Let the driver probe the device to detect the capabilities.
+	 */
+	retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
+	if (retval) {
+		rt2x00_err(rt2x00dev, "Failed to allocate device\n");
+		goto exit;
+	}
+
+	/*
+	 * Allocate queue array.
+	 */
+	retval = rt2x00queue_allocate(rt2x00dev);
+	if (retval)
+		goto exit;
+
+	/* Cache TX headroom value */
+	rt2x00dev->extra_tx_headroom = rt2x00dev_extra_tx_headroom(rt2x00dev);
+
+	/*
+	 * Determine which operating modes are supported, all modes
+	 * which require beaconing, depend on the availability of
+	 * beacon entries.
+	 */
+	rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	if (rt2x00dev->bcn->limit > 0)
+		rt2x00dev->hw->wiphy->interface_modes |=
+		    BIT(NL80211_IFTYPE_ADHOC) |
+#ifdef CONFIG_MAC80211_MESH
+		    BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+		    BIT(NL80211_IFTYPE_AP);
+
+	rt2x00dev->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+
+	wiphy_ext_feature_set(rt2x00dev->hw->wiphy,
+			      NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+
+	/*
+	 * Initialize ieee80211 structure.
+	 */
+	retval = rt2x00lib_probe_hw(rt2x00dev);
+	if (retval) {
+		rt2x00_err(rt2x00dev, "Failed to initialize hw\n");
+		goto exit;
+	}
+
+	/*
+	 * Register extra components.
+	 */
+	rt2x00link_register(rt2x00dev);
+	rt2x00leds_register(rt2x00dev);
+	rt2x00debug_register(rt2x00dev);
+
+	/*
+	 * Start rfkill polling.
+	 */
+	if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL))
+		rt2x00rfkill_register(rt2x00dev);
+
+	return 0;
+
+exit:
+	rt2x00lib_remove_dev(rt2x00dev);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
+
+void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
+{
+	clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+
+	/*
+	 * Stop rfkill polling.
+	 */
+	if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL))
+		rt2x00rfkill_unregister(rt2x00dev);
+
+	/*
+	 * Disable radio.
+	 */
+	rt2x00lib_disable_radio(rt2x00dev);
+
+	/*
+	 * Stop all work.
+	 */
+	cancel_work_sync(&rt2x00dev->intf_work);
+	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+	cancel_work_sync(&rt2x00dev->sleep_work);
+
+	hrtimer_cancel(&rt2x00dev->txstatus_timer);
+
+	/*
+	 * Kill the tx status tasklet.
+	 */
+	tasklet_kill(&rt2x00dev->txstatus_tasklet);
+	tasklet_kill(&rt2x00dev->pretbtt_tasklet);
+	tasklet_kill(&rt2x00dev->tbtt_tasklet);
+	tasklet_kill(&rt2x00dev->rxdone_tasklet);
+	tasklet_kill(&rt2x00dev->autowake_tasklet);
+
+	/*
+	 * Uninitialize device.
+	 */
+	rt2x00lib_uninitialize(rt2x00dev);
+
+	if (rt2x00dev->workqueue)
+		destroy_workqueue(rt2x00dev->workqueue);
+
+	/*
+	 * Free the tx status fifo.
+	 */
+	kfifo_free(&rt2x00dev->txstatus_fifo);
+
+	/*
+	 * Free extra components
+	 */
+	rt2x00debug_deregister(rt2x00dev);
+	rt2x00leds_unregister(rt2x00dev);
+
+	/*
+	 * Free ieee80211_hw memory.
+	 */
+	rt2x00lib_remove_hw(rt2x00dev);
+
+	/*
+	 * Free firmware image.
+	 */
+	rt2x00lib_free_firmware(rt2x00dev);
+
+	/*
+	 * Free queue structures.
+	 */
+	rt2x00queue_free(rt2x00dev);
+
+	/*
+	 * Free the driver data.
+	 */
+	kfree(rt2x00dev->drv_data);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
+
+/*
+ * Device state handlers
+ */
+int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev)
+{
+	rt2x00_dbg(rt2x00dev, "Going to sleep\n");
+
+	/*
+	 * Prevent mac80211 from accessing driver while suspended.
+	 */
+	if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return 0;
+
+	/*
+	 * Cleanup as much as possible.
+	 */
+	rt2x00lib_uninitialize(rt2x00dev);
+
+	/*
+	 * Suspend/disable extra components.
+	 */
+	rt2x00leds_suspend(rt2x00dev);
+	rt2x00debug_deregister(rt2x00dev);
+
+	/*
+	 * Set device mode to sleep for power management,
+	 * on some hardware this call seems to consistently fail.
+	 * From the specifications it is hard to tell why it fails,
+	 * and if this is a "bad thing".
+	 * Overall it is safe to just ignore the failure and
+	 * continue suspending. The only downside is that the
+	 * device will not be in optimal power save mode, but with
+	 * the radio and the other components already disabled the
+	 * device is as good as disabled.
+	 */
+	if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP))
+		rt2x00_warn(rt2x00dev, "Device failed to enter sleep state, continue suspending\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
+
+int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
+{
+	rt2x00_dbg(rt2x00dev, "Waking up\n");
+
+	/*
+	 * Restore/enable extra components.
+	 */
+	rt2x00debug_register(rt2x00dev);
+	rt2x00leds_resume(rt2x00dev);
+
+	/*
+	 * We are ready again to receive requests from mac80211.
+	 */
+	set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_resume);
+
+/*
+ * rt2x00lib module information.
+ */
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("rt2x00 library");
+MODULE_LICENSE("GPL");